11 ofertas

Año de construcción: usado
Precio: 126.615 €
Ubicación: Land-productivity 5 t / h PRODUCTIVITY 5 T / H
Vendedor: SIA "Alfa Agro",
Año de construcción: usado
Ubicación: Land-we offer two refurbished amandus kahl pelleting presses/pelletizer, type c38-780.
(may be sold as one single or as a set of two)

what you will get?
-press/pelletizers c38-780 in new painted housing (in stock):
	+ complete inspected machine 
        + new bearing
	+ roller head with new bearing
	+ new rollers, design at buyers option
	+ hydraulic for roller head (pressure regulation) 
        + support service

further options:
-new electromotors 110 kw, type: path germany (in stock)
-flat in different designs
-wear part package

we speak english, dutch, german and french!

if you have any further questions, please do not hesitate to contact us.

best regards,

amandus kahl benelux b.v.
  WE OFFER TWO REFURBISHED AMANDUS KAHL PELLETING PRESSES/PELLETIZER, TYPE C38-780. (MAY BE SOLD AS ONE SINGLE OR AS A SET OF TWO) WHAT YOU WILL GET? -PRESS/PELLETIZERS C38-780 IN NEW PAINTED HOUSING (IN STOCK): + COMPLETE INSPECTED MACHINE + NEW BEARING + ROLLER HEAD WITH NEW BEARING + NEW ROLLERS, DESIGN AT BUYERS OPTION + HYDRAULIC FOR ROLLER HEAD (PRESSURE REGULATION) + SUPPORT SERVICE FURTHER OPTIONS: -NEW ELECTROMOTORS 110 KW, TYPE: PATH GERMANY (IN STOCK) -FLAT IN DIFFERENT DESIGNS -WEAR PART PACKAGE WE SPEAK ENGLISH, DUTCH, GERMAN AND FRENCH! IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US. BEST REGARDS, AMANDUS KAHL BENELUX B.V.
Vendedor: amandus kahl benelux b.v.
Año de construcción: usado
Ubicación: Land-3 x 780 mm diameter 40 mm 3 X 780 MM DIAMETER 40 MM
Vendedor: TILA GmbH
Año de construcción: usado
Ubicación: Land-pcs. mass state
1 x 6 x 55 new 1 x 30 x 40 new 1 x 6 x 40 new 1 x 6 x 40 used/good
3 x 4 x 42 used/good
1 x 10 x 31 new/retracted
1 x 6 x 55 new/retracted
1 x 10 x 35 new/retracted
1 x 4 x 35 new/retracted
1 x 4 x 33 new/retracted
2 x 4 x 40 new/retracted PCS. MASS STATE 1 X 6 X 55 NEW 1 X 30 X 40 NEW 1 X 6 X 40 NEW 1 X 6 X 40 USED/GOOD 3 X 4 X 42 USED/GOOD 1 X 10 X 31 NEW/RETRACTED 1 X 6 X 55 NEW/RETRACTED 1 X 10 X 35 NEW/RETRACTED 1 X 4 X 35 NEW/RETRACTED 1 X 4 X 33 NEW/RETRACTED 2 X 4 X 40 NEW/RETRACTED
Vendedor: TILA GmbH
Año de construcción: usado
Ubicación: Land-refurbished press c38-600 (version in stainless steel)

wave with new grooves and grooves stones
newly stored (all bearings and shaft seals new)
revised hydraulic nut
revised 4-kant head
positive-drive
new koller
redesigned vertical shaft
new knife holder and knife
revised matrix seat
sandblasted and powder-coated
new oil system with oil pump, filters, flow meters, thermometers, strainers and lines
75-110kw motor on request including
worm shaft and worm wheel in very good condition
matrix can be offered separately. REFURBISHED PRESS C38-600 (VERSION IN STAINLESS STEEL) WAVE WITH NEW GROOVES AND GROOVES STONES NEWLY STORED (ALL BEARINGS AND SHAFT SEALS NEW) REVISED HYDRAULIC NUT REVISED 4-KANT HEAD POSITIVE-DRIVE NEW KOLLER REDESIGNED VERTICAL SHAFT NEW KNIFE HOLDER AND KNIFE REVISED MATRIX SEAT SANDBLASTED AND POWDER-COATED NEW OIL SYSTEM WITH OIL PUMP, FILTERS, FLOW METERS, THERMOMETERS, STRAINERS AND LINES 75-110KW MOTOR ON REQUEST INCLUDING WORM SHAFT AND WORM WHEEL IN VERY GOOD CONDITION MATRIX CAN BE OFFERED SEPARATELY.
Vendedor: Cortelia Systems GmbH
Año de construcción: usado
Ubicación: Land--a press on console with a 37 kw engine
-a press without console with a 37 kw engine
-multiple matrices available -A PRESS ON CONSOLE WITH A 37 KW ENGINE -A PRESS WITHOUT CONSOLE WITH A 37 KW ENGINE -MULTIPLE MATRICES AVAILABLE
Vendedor: TILA GmbH
Año de construcción: usado
Ubicación: Land-pellet - amandus kahl c28-360

rubbed 15kw
2 and 3 koller head available
various matrices available

we have three of these machines in stock! PELLET - AMANDUS KAHL C28-360 RUBBED 15KW 2 AND 3 KOLLER HEAD AVAILABLE VARIOUS MATRICES AVAILABLE WE HAVE THREE OF THESE MACHINES IN STOCK!
Vendedor: Cortelia Systems GmbH
Año de construcción: usado
Ubicación: Land-refurbished press c60-1250 wood finish (= heavy duty)

pellet press, type flat die c60 - 1250 for the manufacture of compacts

conditions of use:

press 0 to + 40 â° c ambient temperature
consisting of:

provide split cast iron housing, in terms of gearbox with cooling fins
dust - and inlet hood with product distribution
king shaft with axial and radial bearings
koller head with koller roles flame hardened steel
spacers
discharge device
worm gear, running in an oil bath, gehã¤rteter worm wheel made of special bronze, worm shaft (flender drive kit)
fan v-belt pulley
oil pump for lubrication of main bearings, with oil filter, pressure gauge and thermometer
press without oil, without matrix-

optional accessories can be offered comprising:

pressing outlet box in stainless steel with bypass valve, inspection port, connection to aspiration and
traffic report
â press hydraulic stepless change of distance between koller roller and die, as well as to the fast and
hassle-free relaxation of the head of koller
hydraulic power pack operating conditions: + 12 to + 40 â° c
hydraulic nuts with corrosion-resistant sealing surfaces, as, swivel and spacers
hydraulic motor pump with electric control box for the control of the hydraulic pump and hydraulic valves,
high pressure hose, couplings and pressure relief valves
control box is ready wired up to the terminal. the electrical connection between
control box and hydraulic power unit is carried out by the customer.
koller central lubrication for lubricating the bearings of koller during the press including
lubricant distributor, with tubing and coupling and hose with a central grease nipple
grease lubrication-aggregate with tank, pump, safety valves, monitoring and
control unit
drive can optionally be offered comprising:

slide rails
v-belt pulley
v-belt
belt protection, carried out in steel construction, side walls with special air baffle plates, press cooling
absolutely necessary
three-phase motor, power: selectable
speed control with pulse sensor and evaluation unit
visit required!

we offer this machine "in the existing condition" for sale.
an appointment can be arranged at any time.

all machines are offered as follows:

general: all machines are to our currently valid terms and conditions offered on our
page can be viewed at any time. information concerning performance and format should be
basically manufacturer specifications for cortelia systems gmbh assumes no liability. all machines / plants
"in an existing state" offered for sale, deviations shall only apply if this has been explicitly specified.
errors in the description and sale are reserved to us.

pricing: all machines without disassembly, are basically unpacked, from specified location, at
foreign business transactions tax-free and duty-free without document verification offered. all prices are net prices, in
vat is charged at the current rate domestic transactions. beginning of dismantling and delivery takes place after
receipt of payment.

we assure you a correct handling now. REFURBISHED PRESS C60-1250 WOOD FINISH (= HEAVY DUTY) PELLET PRESS, TYPE FLAT DIE C60 - 1250 FOR THE MANUFACTURE OF COMPACTS CONDITIONS OF USE: PRESS 0 TO + 40 ° C AMBIENT TEMPERATURE CONSISTING OF: PROVIDE SPLIT CAST IRON HOUSING, IN TERMS OF GEARBOX WITH COOLING FINS DUST - AND INLET HOOD WITH PRODUCT DISTRIBUTION KING SHAFT WITH AXIAL AND RADIAL BEARINGS KOLLER HEAD WITH KOLLER ROLES FLAME HARDENED STEEL SPACERS DISCHARGE DEVICE WORM GEAR, RUNNING IN AN OIL BATH, GEHäRTETER WORM WHEEL MADE OF SPECIAL BRONZE, WORM SHAFT (FLENDER DRIVE KIT) FAN V-BELT PULLEY OIL PUMP FOR LUBRICATION OF MAIN BEARINGS, WITH OIL FILTER, PRESSURE GAUGE AND THERMOMETER PRESS WITHOUT OIL, WITHOUT MATRIX- OPTIONAL ACCESSORIES CAN BE OFFERED COMPRISING: PRESSING OUTLET BOX IN STAINLESS STEEL WITH BYPASS VALVE, INSPECTION PORT, CONNECTION TO ASPIRATION AND TRAFFIC REPORT  PRESS HYDRAULIC STEPLESS CHANGE OF DISTANCE BETWEEN KOLLER ROLLER AND DIE, AS WELL AS TO THE FAST AND HASSLE-FREE RELAXATION OF THE HEAD OF KOLLER HYDRAULIC POWER PACK OPERATING CONDITIONS: + 12 TO + 40 ° C HYDRAULIC NUTS WITH CORROSION-RESISTANT SEALING SURFACES, AS, SWIVEL AND SPACERS HYDRAULIC MOTOR PUMP WITH ELECTRIC CONTROL BOX FOR THE CONTROL OF THE HYDRAULIC PUMP AND HYDRAULIC VALVES, HIGH PRESSURE HOSE, COUPLINGS AND PRESSURE RELIEF VALVES CONTROL BOX IS READY WIRED UP TO THE TERMINAL. THE ELECTRICAL CONNECTION BETWEEN CONTROL BOX AND HYDRAULIC POWER UNIT IS CARRIED OUT BY THE CUSTOMER. KOLLER CENTRAL LUBRICATION FOR LUBRICATING THE BEARINGS OF KOLLER DURING THE PRESS INCLUDING LUBRICANT DISTRIBUTOR, WITH TUBING AND COUPLING AND HOSE WITH A CENTRAL GREASE NIPPLE GREASE LUBRICATION-AGGREGATE WITH TANK, PUMP, SAFETY VALVES, MONITORING AND CONTROL UNIT DRIVE CAN OPTIONALLY BE OFFERED COMPRISING: SLIDE RAILS V-BELT PULLEY V-BELT BELT PROTECTION, CARRIED OUT IN STEEL CONSTRUCTION, SIDE WALLS WITH SPECIAL AIR BAFFLE PLATES, PRESS COOLING ABSOLUTELY NECESSARY THREE-PHASE MOTOR, POWER: SELECTABLE SPEED CONTROL WITH PULSE SENSOR AND EVALUATION UNIT VISIT REQUIRED! WE OFFER THIS MACHINE "IN THE EXISTING CONDITION" FOR SALE. AN APPOINTMENT CAN BE ARRANGED AT ANY TIME. ALL MACHINES ARE OFFERED AS FOLLOWS: GENERAL: ALL MACHINES ARE TO OUR CURRENTLY VALID TERMS AND CONDITIONS OFFERED ON OUR PAGE CAN BE VIEWED AT ANY TIME. INFORMATION CONCERNING PERFORMANCE AND FORMAT SHOULD BE BASICALLY MANUFACTURER SPECIFICATIONS FOR CORTELIA SYSTEMS GMBH ASSUMES NO LIABILITY. ALL MACHINES / PLANTS "IN AN EXISTING STATE" OFFERED FOR SALE, DEVIATIONS SHALL ONLY APPLY IF THIS HAS BEEN EXPLICITLY SPECIFIED. ERRORS IN THE DESCRIPTION AND SALE ARE RESERVED TO US. PRICING: ALL MACHINES WITHOUT DISASSEMBLY, ARE BASICALLY UNPACKED, FROM SPECIFIED LOCATION, AT FOREIGN BUSINESS TRANSACTIONS TAX-FREE AND DUTY-FREE WITHOUT DOCUMENT VERIFICATION OFFERED. ALL PRICES ARE NET PRICES, IN VAT IS CHARGED AT THE CURRENT RATE DOMESTIC TRANSACTIONS. BEGINNING OF DISMANTLING AND DELIVERY TAKES PLACE AFTER RECEIPT OF PAYMENT. WE ASSURE YOU A CORRECT HANDLING NOW.
Vendedor: Cortelia Systems GmbH
Año de construcción: usado
Ubicación: Land-refurbished press 35-780
-shaft with new grooves and grooves stones
-newly stored (all bearings and shaft seals new)
-new koller newly stored
-new blade with knife holder
-4-way head of koller
-sandblasted and powder-coated
-new oil system with integrated oil pump and filter
-currently a 90 kw drive motor is installed - this can be changed! REFURBISHED PRESS 35-780 -SHAFT WITH NEW GROOVES AND GROOVES STONES -NEWLY STORED (ALL BEARINGS AND SHAFT SEALS NEW) -NEW KOLLER NEWLY STORED -NEW BLADE WITH KNIFE HOLDER -4-WAY HEAD OF KOLLER -SANDBLASTED AND POWDER-COATED -NEW OIL SYSTEM WITH INTEGRATED OIL PUMP AND FILTER -CURRENTLY A 90 KW DRIVE MOTOR IS INSTALLED - THIS CAN BE CHANGED!
Vendedor: Cortelia Systems GmbH
Año de construcción: usado
Ubicación: Land-completely revised pellet 39-1000 amandus kahl with koller header COMPLETELY REVISED PELLET 39-1000 AMANDUS KAHL WITH KOLLER HEADER
Vendedor: Cortelia Systems GmbH
Año de construcción: usado
Precio: 49.500 €
Ubicación: Land-flat matrices press c38-780 compl. obsolete neurn ball bearings

with compl. koller header.
   FLAT MATRICES PRESS C38-780 COMPL. OBSOLETE NEURN BALL BEARINGS WITH COMPL. KOLLER HEADER.
Vendedor: Metall-Verarbeitung-Service
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KAHL types: