517 ofertas

Año de construcción: usado
Precio: 7.960 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


universal cylindrical grinding machine mso-cincinnati
with internal grinding attachment

manufacturer: mso-cincinnati
type:  r 57
mach.-nr.: m 25956
year of construction: ??? / 03.2019 tüp.
comm.-nr.: 3990000/009
stock-nr.: 1899

+++ special price: old 9.950,- € | now 7.960,- €
+++ all prices are shown without taxes (net price)


the machine is suitable for:

* external grinding
* internal grinding
* surface grinding
* taper grinding
* chamfering
* angled flat grinding

 
technical data

(according to manufacturer)

centre height: 90 mm
swing-Ø: 180 mm
grinding length: 400 mm

grinding wheel

diameter: 350 mm
bore-Ø: 76 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest hub by hand wheel: 67 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: 0,5 mm
feed by one hand wheel graduation mark: 0,005 mm
setting by tip-switch regarding diameter: 0,005 mm

internal grinding attachment

largest distance from front edge spindle headstock to grinding spidnle carrier: 620 mm
bore for carrying the spindle: 60 mm
largest grindable bore: 125 mm / maybe larger

headstock spindle

6 work-piece speeds, adjustable: 80 – 800 rpm
rotatability of headstock spindle against the grinding wheel: 90° / opposite side °45
spindle cone or inner taper of headstock spindle: mk 3

tailstock

inner cone of quill: mk 3
quill travel: 20 mm

table

largest table incline: 14°
largest cone angle: 28°
table speed: 0,0 – 7,0 m/min
rough travel by hand wheel: 1 revolution 20 mm, 1 graduation mark 0,40 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,05 mm

total connected load: ca. 5 kw
weight: ca. 1.800 kg
standing area: w 1,70 x d 1,50 x h 1,60 m
color: blue / grey-white / red

 
features

* rotatable internal grinding attachment
* manual or automatic operation
* self-feeding up to 0-limit
* grinding wheel fine adjustment
* automatic feed works as piercing feed, without feed, table-dependant feed
* only right / left and right / only left
* upper table for tamper grinding with fine feed and measuring clock
* bedway is lubricated by re-oil
* tailstock can be activated by mechanical lever
* attachment with measuring clock for table pivoting up to 14°
* headstock spindle pivotable up to 90/45°
* grinding head pivotable up to 360°
* grinding head two speeds
* free-standing liquid cooling system, mobile
* splash guards
* grinding wheel flanges with wheels
* internal grinding spindle with cone attachment and extraction threading
* internal cooling through work spindle on work piece during internal grinding
* adjustable straight and radial matching device with quick-fastening lever
* adjustable dressing device for grinding wheel, at tailstock
* adjustable side and diagonal dressing device with scale, for grinding wheel, with quick-release lever
* open lunette, adjustable
* three-chuck-fastening buffer forkhardt Ø 125 mm, with spindle receiver flange (unused)
* fastening clamp device with spindle recevier, fastening clamp set 32 pieces
* grinding thorns for internal grinding in various sizes
* number of retreiving-hearts in various sizes
* number of internal grinding spindles in various sizes
* number of spreading thorns in various sizes


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation. %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! UNIVERSAL CYLINDRICAL GRINDING MACHINE MSO-CINCINNATI WITH INTERNAL GRINDING ATTACHMENT MANUFACTURER: MSO-CINCINNATI TYPE: R 57 MACH.-NR.: M 25956 YEAR OF CONSTRUCTION: ??? / 03.2019 TüP. COMM.-NR.: 3990000/009 STOCK-NR.: 1899 +++ SPECIAL PRICE: OLD 9.950,- € | NOW 7.960,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE IS SUITABLE FOR: * EXTERNAL GRINDING * INTERNAL GRINDING * SURFACE GRINDING * TAPER GRINDING * CHAMFERING * ANGLED FLAT GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) CENTRE HEIGHT: 90 MM SWING-Ø: 180 MM GRINDING LENGTH: 400 MM GRINDING WHEEL DIAMETER: 350 MM BORE-Ø: 76 MM LARGEST WIDTH OF GRINDING WHEEL FOR PLUNGE GRINDING: 40 MM LARGEST TOTAL WIDTH OF A GRINDING WHEEL SET: 80 MM LARGEST SUM OF SINGLE WIDTHS: 40 MM GRINDING WHEEL SPEED: 1.650 / 2.150 RPM = 30 M/S GRINDING HEAD LARGEST GRINDING HEAD HUB: 209 MM LARGEST HUB BY HAND WHEEL: 67 MM ADDITIONAL HUB: 142 MM AUTOM. INTERVAL FEED: 0,005 – 0,020 MM FEED BY ONE REVOLUTION OF HAND WHEEL: 0,5 MM FEED BY ONE HAND WHEEL GRADUATION MARK: 0,005 MM SETTING BY TIP-SWITCH REGARDING DIAMETER: 0,005 MM INTERNAL GRINDING ATTACHMENT LARGEST DISTANCE FROM FRONT EDGE SPINDLE HEADSTOCK TO GRINDING SPIDNLE CARRIER: 620 MM BORE FOR CARRYING THE SPINDLE: 60 MM LARGEST GRINDABLE BORE: 125 MM / MAYBE LARGER HEADSTOCK SPINDLE 6 WORK-PIECE SPEEDS, ADJUSTABLE: 80 – 800 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° / OPPOSITE SIDE °45 SPINDLE CONE OR INNER TAPER OF HEADSTOCK SPINDLE: MK 3 TAILSTOCK INNER CONE OF QUILL: MK 3 QUILL TRAVEL: 20 MM TABLE LARGEST TABLE INCLINE: 14° LARGEST CONE ANGLE: 28° TABLE SPEED: 0,0 – 7,0 M/MIN ROUGH TRAVEL BY HAND WHEEL: 1 REVOLUTION 20 MM, 1 GRADUATION MARK 0,40 MM FINE TRAVEL BY HAND WHEEL: 1 REVOLUTION 2,5 MM, 1 GRADUATION MARK 0,05 MM TOTAL CONNECTED LOAD: CA. 5 KW WEIGHT: CA. 1.800 KG STANDING AREA: W 1,70 X D 1,50 X H 1,60 M COLOR: BLUE / GREY-WHITE / RED FEATURES * ROTATABLE INTERNAL GRINDING ATTACHMENT * MANUAL OR AUTOMATIC OPERATION * SELF-FEEDING UP TO 0-LIMIT * GRINDING WHEEL FINE ADJUSTMENT * AUTOMATIC FEED WORKS AS PIERCING FEED, WITHOUT FEED, TABLE-DEPENDANT FEED * ONLY RIGHT / LEFT AND RIGHT / ONLY LEFT * UPPER TABLE FOR TAMPER GRINDING WITH FINE FEED AND MEASURING CLOCK * BEDWAY IS LUBRICATED BY RE-OIL * TAILSTOCK CAN BE ACTIVATED BY MECHANICAL LEVER * ATTACHMENT WITH MEASURING CLOCK FOR TABLE PIVOTING UP TO 14° * HEADSTOCK SPINDLE PIVOTABLE UP TO 90/45° * GRINDING HEAD PIVOTABLE UP TO 360° * GRINDING HEAD TWO SPEEDS * FREE-STANDING LIQUID COOLING SYSTEM, MOBILE * SPLASH GUARDS * GRINDING WHEEL FLANGES WITH WHEELS * INTERNAL GRINDING SPINDLE WITH CONE ATTACHMENT AND EXTRACTION THREADING * INTERNAL COOLING THROUGH WORK SPINDLE ON WORK PIECE DURING INTERNAL GRINDING * ADJUSTABLE STRAIGHT AND RADIAL MATCHING DEVICE WITH QUICK-FASTENING LEVER * ADJUSTABLE DRESSING DEVICE FOR GRINDING WHEEL, AT TAILSTOCK * ADJUSTABLE SIDE AND DIAGONAL DRESSING DEVICE WITH SCALE, FOR GRINDING WHEEL, WITH QUICK-RELEASE LEVER * OPEN LUNETTE, ADJUSTABLE * THREE-CHUCK-FASTENING BUFFER FORKHARDT Ø 125 MM, WITH SPINDLE RECEIVER FLANGE (UNUSED) * FASTENING CLAMP DEVICE WITH SPINDLE RECEVIER, FASTENING CLAMP SET 32 PIECES * GRINDING THORNS FOR INTERNAL GRINDING IN VARIOUS SIZES * NUMBER OF RETREIVING-HEARTS IN VARIOUS SIZES * NUMBER OF INTERNAL GRINDING SPINDLES IN VARIOUS SIZES * NUMBER OF SPREADING THORNS IN VARIOUS SIZES * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-tools: 1 whip, 1 four wing beater, 1 two wing beater (like a guitar)\r\nbowls stainless steel include trolley TOOLS: 1 WHIP, 1 FOUR WING BEATER, 1 TWO WING BEATER (LIKE A GUITAR)\R\NBOWLS STAINLESS STEEL INCLUDE TROLLEY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used 150 kva generator set consists of a deutz f8l413f engine and a stamford c408 generator.

please contact us regarding pricing and availability. USED 150 KVA GENERATOR SET CONSISTS OF A DEUTZ F8L413F ENGINE AND A STAMFORD C408 GENERATOR. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-chamfered up at the rear,\r\nwith supporting frame with panels on 3 sides.\r\nbelow basin d 535/400 / w 500/400, h 200mm\r\nupper basin d 335/280 / w 500/400, h 280mm\r\ndistance basin from the floor\r\nbelow 525 / upper 1060 mm\r\n CHAMFERED UP AT THE REAR,\R\NWITH SUPPORTING FRAME WITH PANELS ON 3 SIDES.\R\NBELOW BASIN D 535/400 / W 500/400, H 200MM\R\NUPPER BASIN D 335/280 / W 500/400, H 280MM\R\NDISTANCE BASIN FROM THE FLOOR\R\NBELOW 525 / UPPER 1060 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used 175 kva stamford c434b generator

please contact us regarding pricing and availability. USED 175 KVA STAMFORD C434B GENERATOR PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-pressure: 40 t<br/>chamfer lenght: 1250 mm<br/>distance between columns: 1050 mm<br/>column arm: 200 mm<br/>table width: 140 mm<br/>ram stroke max. - stepless: 100 mm/sec<br/>dayligth: 300 mm<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 2.000 kg.<br/>range l-w-h: 1,6 x 1,25 x 1,98 m<br/><br/><br/><br/><br/> PRESSURE: 40 T
CHAMFER LENGHT: 1250 MM
DISTANCE BETWEEN COLUMNS: 1050 MM
COLUMN ARM: 200 MM
TABLE WIDTH: 140 MM
RAM STROKE MAX. - STEPLESS: 100 MM/SEC
DAYLIGTH: 300 MM
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 2.000 KG.
RANGE L-W-H: 1,6 X 1,25 X 1,98 M




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 1.890 €
Ubicación: Land-edge glue machine fravol rapid / r 4

to glue thickness max mm: 15 to glue height max mm: 65 thickness of rolling material max mm: 3 workpiece length min mm: 60 feed max m/min: 16 feed continuously variable: yes glue system granules: glue basin below caps saw unit: 2 motors flush/radius/chamfer stations: 2 strip magazine: yes a performing: legal machine ce mark: yes total connection kw: 12.70 weight ca. 1225 kg
length: 3200 mm, width 1000 mm, height 1700 mm
built in 1999

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 EDGE GLUE MACHINE FRAVOL RAPID / R 4 TO GLUE THICKNESS MAX MM: 15 TO GLUE HEIGHT MAX MM: 65 THICKNESS OF ROLLING MATERIAL MAX MM: 3 WORKPIECE LENGTH MIN MM: 60 FEED MAX M/MIN: 16 FEED CONTINUOUSLY VARIABLE: YES GLUE SYSTEM GRANULES: GLUE BASIN BELOW CAPS SAW UNIT: 2 MOTORS FLUSH/RADIUS/CHAMFER STATIONS: 2 STRIP MAGAZINE: YES A PERFORMING: LEGAL MACHINE CE MARK: YES TOTAL CONNECTION KW: 12.70 WEIGHT CA. 1225 KG LENGTH: 3200 MM, WIDTH 1000 MM, HEIGHT 1700 MM BUILT IN 1999 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>chamfer lenght:2505 mm<br/>distance between columns:400 mm<br/>table length:2500 mm<br/>distance between columns:2200 mm<br/>stroke length max.:100 mm<br/>cylinder:2 st.<br/>speed ??- folding:77 <br/>speed ??- delivery:7 <br/>speed ??- retreat:76 <br/>oil volume:65 l<br/>total power requirement:8,7 kva 400 v <br/>dimensions of the machine ca.:3690 x 2375 x 2485 mm<br/>weight of the machine ca.:6500 t<br/><br/> PRESSURE:100 T
CHAMFER LENGHT:2505 MM
DISTANCE BETWEEN COLUMNS:400 MM
TABLE LENGTH:2500 MM
DISTANCE BETWEEN COLUMNS:2200 MM
STROKE LENGTH MAX.:100 MM
CYLINDER:2 ST.
SPEED ??- FOLDING:77
SPEED ??- DELIVERY:7
SPEED ??- RETREAT:76
OIL VOLUME:65 L
TOTAL POWER REQUIREMENT:8,7 KVA 400 V
DIMENSIONS OF THE MACHINE CA.:3690 X 2375 X 2485 MM
WEIGHT OF THE MACHINE CA.:6500 T

Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-rod tip machine on 22-99-004
shipping time: immediately

id: 22-99-004

manufacturer: contour
type: 667p/a

machine data
construction year: ca 1989
l x w x h: ca. 1300 x 900 x 1300 mm
weight: 300 kg

very good condition

technical data
control: conventional
rods ã? (work area) approx. ã? 6-67 mm
operating voltage: 380 v

other accessories on request
price and other specifications on request ROD TIP MACHINE ON 22-99-004 SHIPPING TIME: IMMEDIATELY ID: 22-99-004 MANUFACTURER: CONTOUR TYPE: 667P/A MACHINE DATA CONSTRUCTION YEAR: CA 1989 L X W X H: CA. 1300 X 900 X 1300 MM WEIGHT: 300 KG VERY GOOD CONDITION TECHNICAL DATA CONTROL: CONVENTIONAL RODS &ATILDE;? (WORK AREA) APPROX. &ATILDE;? 6-67 MM OPERATING VOLTAGE: 380 V OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure:135 t<br/>chamfer lenght:3100 mm<br/>distance between columns:2600 mm<br/>table width:180 mm<br/>dayligth:325 mm<br/>stroke:120 mm<br/>column arm:270 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:8,0 t<br/>dimensions of the machine ca.:3,2 x 2,2 x 2,3 m<br/><br/> PRESSURE:135 T
CHAMFER LENGHT:3100 MM
DISTANCE BETWEEN COLUMNS:2600 MM
TABLE WIDTH:180 MM
DAYLIGTH:325 MM
STROKE:120 MM
COLUMN ARM:270 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:8,0 T
DIMENSIONS OF THE MACHINE CA.:3,2 X 2,2 X 2,3 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-cross-cutting of the edges roll up 135 mm2 cross-section
-roll diameter of 900 mm
-soil conditions must comply with the foundation plan

facilities:
-trimming unit, 2 motors 3 kw with noise protection
-workpiece preheating
-veleimteil a20, consisting of qa34 melt adhesive unit, magazine, role disconnecting device, pressure zone c, noise protection and end trimming unit hl83
-feeder 2 rolls, folded
-counterpressure roller for narrow parts
-workpiece support in scissor design with roll coating, max 1000 mm extendable, with extension
-stepless shaft edge thickness for the auto. adjustment of the pressure zone
-anti-caking agent unit
-roller changing device 2 x 3.5 mm
-pneumatic adjustment compound miter saw bevel / straight
-milling unit 1 kw, pneum.. adjustable
-form unit fk13, automatic
-adjustment of agggregattraeger continuously for fk device
-universal milling unit, 4 kw, controlled
-multi for plasters in direction
-for plasters in direction glue joint
-chamfer/radiusschleifagggregat below and above (ps 41/42), automatically adjustable
-buffing unit up and down
-nc 21 control 
 TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -CROSS-CUTTING OF THE EDGES ROLL UP 135 MM2 CROSS-SECTION -ROLL DIAMETER OF 900 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN FACILITIES: -TRIMMING UNIT, 2 MOTORS 3 KW WITH NOISE PROTECTION -WORKPIECE PREHEATING -VELEIMTEIL A20, CONSISTING OF QA34 MELT ADHESIVE UNIT, MAGAZINE, ROLE DISCONNECTING DEVICE, PRESSURE ZONE C, NOISE PROTECTION AND END TRIMMING UNIT HL83 -FEEDER 2 ROLLS, FOLDED -COUNTERPRESSURE ROLLER FOR NARROW PARTS -WORKPIECE SUPPORT IN SCISSOR DESIGN WITH ROLL COATING, MAX 1000 MM EXTENDABLE, WITH EXTENSION -STEPLESS SHAFT EDGE THICKNESS FOR THE AUTO. ADJUSTMENT OF THE PRESSURE ZONE -ANTI-CAKING AGENT UNIT -ROLLER CHANGING DEVICE 2 X 3.5 MM -PNEUMATIC ADJUSTMENT COMPOUND MITER SAW BEVEL / STRAIGHT -MILLING UNIT 1 KW, PNEUM.. ADJUSTABLE -FORM UNIT FK13, AUTOMATIC -ADJUSTMENT OF AGGGREGATTRAEGER CONTINUOUSLY FOR FK DEVICE -UNIVERSAL MILLING UNIT, 4 KW, CONTROLLED -MULTI FOR PLASTERS IN DIRECTION -FOR PLASTERS IN DIRECTION GLUE JOINT -CHAMFER/RADIUSSCHLEIFAGGGREGAT BELOW AND ABOVE (PS 41/42), AUTOMATICALLY ADJUSTABLE -BUFFING UNIT UP AND DOWN -NC 21 CONTROL
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-fixed side at the left<br/>feedspeed 18 - 25 m/min<br/>working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm<br/>panel overhang 30mm<br/>panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)<br/>coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm<br/>coil diameter 830 mm<br/>equipment:<br/>squaring device with 2 motors each 3 kw<br/>edge heating<br/>edge magazine for 2 coils, guillotine for edges up to 3 mm<br/>glueing part a20 with quickmelt application<br/>lateral pressure zone k, 1 driven and 2 after pressing rollers<br/>end trims hl84, 2 motors each 0,8kw <br/>rough trimming, 2 motors 1,5kw<br/>contour trimming, 2 exchange units<br/>profile scraping pn10<br/>flat scrapers fa11<br/>buffing<br/>automation package straight/chamfer:<br/>-automatic adjustment infeed fence<br/>-automatic setting of pressure rollers<br/>-pneumatic setting of end trims<br/>-pneumatic setting of rough trims<br/>-automatic setting of chamfer/radius on the contour trims<br/>-pneumatic setting of profile and flat scraping  units<br/>-electronic height positioning FIXED SIDE AT THE LEFT
FEEDSPEED 18 - 25 M/MIN
WORKING WIDTH MIN 60MM FOR PANEL THICKNESS 22MM, 105MM FOR PANEL THICKNESS 40MM
PANEL OVERHANG 30MM
PANEL THICKNESS 8 - 60 MM IN STEAD OF 12 - 40 MM (WITH LIMITATIONS)
COIL EDGE THICKNESS: 0,3 - 3 MM, STRIPS 0,4 - 20 MM
COIL DIAMETER 830 MM
EQUIPMENT:
SQUARING DEVICE WITH 2 MOTORS EACH 3 KW
EDGE HEATING
EDGE MAGAZINE FOR 2 COILS, GUILLOTINE FOR EDGES UP TO 3 MM
GLUEING PART A20 WITH QUICKMELT APPLICATION
LATERAL PRESSURE ZONE K, 1 DRIVEN AND 2 AFTER PRESSING ROLLERS
END TRIMS HL84, 2 MOTORS EACH 0,8KW
ROUGH TRIMMING, 2 MOTORS 1,5KW
CONTOUR TRIMMING, 2 EXCHANGE UNITS
PROFILE SCRAPING PN10
FLAT SCRAPERS FA11
BUFFING
AUTOMATION PACKAGE STRAIGHT/CHAMFER:
-AUTOMATIC ADJUSTMENT INFEED FENCE
-AUTOMATIC SETTING OF PRESSURE ROLLERS
-PNEUMATIC SETTING OF END TRIMS
-PNEUMATIC SETTING OF ROUGH TRIMS
-AUTOMATIC SETTING OF CHAMFER/RADIUS ON THE CONTOUR TRIMS
-PNEUMATIC SETTING OF PROFILE AND FLAT SCRAPING UNITS
-ELECTRONIC HEIGHT POSITIONING
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-facilities:
-edge banding
-caps
-flush milling (chamfer/radius)
-multifunktionsfrã¤saggregat
-buffing wheels

technical data (no liability assumed):
workpiece length: min: 150 width: 60-80 mm, depending on the edge material
workpiece height: 10-45 mm
edge thickness of 12 mm
max on glue er length: 400 mm
feed: 12 m / min
weight: 2.400 kg
power: 14 kw / 25 a
electrical supply: 400 v / 50 hz
compressed air connection 7-10 bar
compressed air consumption 35 nl/min
extraction needed 25 m/s
 FACILITIES: -EDGE BANDING -CAPS -FLUSH MILLING (CHAMFER/RADIUS) -MULTIFUNKTIONSFR&ATILDE;&CURREN;SAGGREGAT -BUFFING WHEELS TECHNICAL DATA (NO LIABILITY ASSUMED): WORKPIECE LENGTH: MIN: 150 WIDTH: 60-80 MM, DEPENDING ON THE EDGE MATERIAL WORKPIECE HEIGHT: 10-45 MM EDGE THICKNESS OF 12 MM MAX ON GLUE ER LENGTH: 400 MM FEED: 12 M / MIN WEIGHT: 2.400 KG POWER: 14 KW / 25 A ELECTRICAL SUPPLY: 400 V / 50 HZ COMPRESSED AIR CONNECTION 7-10 BAR COMPRESSED AIR CONSUMPTION 35 NL/MIN EXTRACTION NEEDED 25 M/S
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-panel feed with chain, feed speed 8 and 16 m/min<br/>top pressures with rollers<br/>coil edges 0,3 to 3 mm, strips 0,3 to 13 mm.<br/>edges up to 66 mm height<br/>panel thickness 6 to 60 mm (limited to max. 45 mm for the end trims)<br/>equipment:<br/>1906 glueing unit with hot melt cartridges<br/>1901 edge magazine with guillotine for coil edges<br/>1926 pressure rollers, pneum. loaded, 1 driven, 3 non-driven rollers<br/>1916mf end trims, front and rear, motors 0,45 kw, straight and chamfer<br/>1942 top and bottom frims, motors 0,6 kw, tilting<br/>1942m multi-function top and bottom frims, motors 0,6 kw, tilting<br/>1944 buffing with oscillation<br/>sound enclosure PANEL FEED WITH CHAIN, FEED SPEED 8 AND 16 M/MIN
TOP PRESSURES WITH ROLLERS
COIL EDGES 0,3 TO 3 MM, STRIPS 0,3 TO 13 MM.
EDGES UP TO 66 MM HEIGHT
PANEL THICKNESS 6 TO 60 MM (LIMITED TO MAX. 45 MM FOR THE END TRIMS)
EQUIPMENT:
1906 GLUEING UNIT WITH HOT MELT CARTRIDGES
1901 EDGE MAGAZINE WITH GUILLOTINE FOR COIL EDGES
1926 PRESSURE ROLLERS, PNEUM. LOADED, 1 DRIVEN, 3 NON-DRIVEN ROLLERS
1916MF END TRIMS, FRONT AND REAR, MOTORS 0,45 KW, STRAIGHT AND CHAMFER
1942 TOP AND BOTTOM FRIMS, MOTORS 0,6 KW, TILTING
1942M MULTI-FUNCTION TOP AND BOTTOM FRIMS, MOTORS 0,6 KW, TILTING
1944 BUFFING WITH OSCILLATION
SOUND ENCLOSURE
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-single-sided machine to the fã¼gefrã¤sen straight workpiece edges, gluing and manipulating various edging materials from the reel or strip thickness up to 20 mm edge,
in the longitudinal and transverse flow.

fixed left stop page.

equipment:
-robust basic machine with chain for
precise work piece transport
-motorized height-adjustable top pressure with
compound v-belts
-input unit nc21 homatic control
-electronic frequency converter for the
editing aggregates
-trimming unit with 2 motors
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-noise protection for the machining units
-gluing part a20
-trimming unit chamfer/straight hl04/05,
with pneum. adjustment - free space for more editing aggregates
-0021 feeder 2 rolls
-0171 carriage
-chip conveyor 0429
-0648 workpiece support scissor design
-0649 extension scissor design
-0835 workpiece projection 30 mm instead of 40 mm
-auto 0815. chain rail lubrication
-2182 gluing unit pu34
-2456 extension magazine on 2 wheels
-auto 2603. adjustment pressure zone
-vorfrã¤sgaggregat 3209, pneum.. adjustable
-3709 form unit fk13 8-speed automatic
-3740 manual adjustment for fk device
-3401 universal milling unit 4 kw controlled
-3420 absaugehaube below
-3426 abstastung above for uf11
-3427 scanning side for uf11
-4508 multi for plasters in direction mn21 automatically
-4501 for plasters in direction of glue joints
-4402 buffing unit top and bottom with frequency control

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar
-soil conditions must comply with the foundation plan SINGLE-SIDED MACHINE TO THE F&ATILDE;&FRAC14;GEFR&ATILDE;&CURREN;SEN STRAIGHT WORKPIECE EDGES, GLUING AND MANIPULATING VARIOUS EDGING MATERIALS FROM THE REEL OR STRIP THICKNESS UP TO 20 MM EDGE, IN THE LONGITUDINAL AND TRANSVERSE FLOW. FIXED LEFT STOP PAGE. EQUIPMENT: -ROBUST BASIC MACHINE WITH CHAIN FOR PRECISE WORK PIECE TRANSPORT -MOTORIZED HEIGHT-ADJUSTABLE TOP PRESSURE WITH COMPOUND V-BELTS -INPUT UNIT NC21 HOMATIC CONTROL -ELECTRONIC FREQUENCY CONVERTER FOR THE EDITING AGGREGATES -TRIMMING UNIT WITH 2 MOTORS -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -NOISE PROTECTION FOR THE MACHINING UNITS -GLUING PART A20 -TRIMMING UNIT CHAMFER/STRAIGHT HL04/05, WITH PNEUM. ADJUSTMENT - FREE SPACE FOR MORE EDITING AGGREGATES -0021 FEEDER 2 ROLLS -0171 CARRIAGE -CHIP CONVEYOR 0429 -0648 WORKPIECE SUPPORT SCISSOR DESIGN -0649 EXTENSION SCISSOR DESIGN -0835 WORKPIECE PROJECTION 30 MM INSTEAD OF 40 MM -AUTO 0815. CHAIN RAIL LUBRICATION -2182 GLUING UNIT PU34 -2456 EXTENSION MAGAZINE ON 2 WHEELS -AUTO 2603. ADJUSTMENT PRESSURE ZONE -VORFR&ATILDE;&CURREN;SGAGGREGAT 3209, PNEUM.. ADJUSTABLE -3709 FORM UNIT FK13 8-SPEED AUTOMATIC -3740 MANUAL ADJUSTMENT FOR FK DEVICE -3401 UNIVERSAL MILLING UNIT 4 KW CONTROLLED -3420 ABSAUGEHAUBE BELOW -3426 ABSTASTUNG ABOVE FOR UF11 -3427 SCANNING SIDE FOR UF11 -4508 MULTI FOR PLASTERS IN DIRECTION MN21 AUTOMATICALLY -4501 FOR PLASTERS IN DIRECTION OF GLUE JOINTS -4402 BUFFING UNIT TOP AND BOTTOM WITH FREQUENCY CONTROL TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-edges up to 3 mm from coil, 6 mm strips<br/>workpiece width min:<br/>when workpiece thickness 12-22mm 70 mm*<br/>when workpiece thickness23-40 mm, 120 mm*<br/>when workpiece thicknesse 41-60mm 150 mm*<br/>*in relation to workpiece length<br/>feed speed 11 m/min<br/>equipment:<br/>pre-milling 2 x 2,2 kw <br/>pre-heating of panel edge<br/>glue aggregate a6<br/>coil edge magazine<br/>pressure zone, central positioning<br/>end trims, chamfer 15°/straight,  2 x 0,18 kw, 12.000 rpm, electro-pneumatic setting central control<br/>top & bottom trimmng, 2 x 0,27 kw, automatic adjustment when switching from straight to angle<br/>corner rounding unit 1 x 0,35 kw, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece length: 250 mm.<br/>profile scraping unit, quick toolchange, edge thickness: max. 3 mm, electro-pneumatic setting by central control<br/>glue scraping unit<br/>buffing, 2 x 0,09 kw<br/>electronic easy control ec 10+<br/>installed options:<br/>-tooling r= 2 mm<br/>-automatic infeed of the edges kdx1210 (fast exchange of coil edges)<br/>-contour trims 4802 with vertical action doing shelves<br/>-multiple tracing on the top/bottom trims (in case of angled workpieces or drilled workpieces)<br/>-special tracing on the profile scrapers EDGES UP TO 3 MM FROM COIL, 6 MM STRIPS
WORKPIECE WIDTH MIN:
WHEN WORKPIECE THICKNESS 12-22MM 70 MM*
WHEN WORKPIECE THICKNESS23-40 MM, 120 MM*
WHEN WORKPIECE THICKNESSE 41-60MM 150 MM*
*IN RELATION TO WORKPIECE LENGTH
FEED SPEED 11 M/MIN
EQUIPMENT:
PRE-MILLING 2 X 2,2 KW
PRE-HEATING OF PANEL EDGE
GLUE AGGREGATE A6
COIL EDGE MAGAZINE
PRESSURE ZONE, CENTRAL POSITIONING
END TRIMS, CHAMFER 15°/STRAIGHT, 2 X 0,18 KW, 12.000 RPM, ELECTRO-PNEUMATIC SETTING CENTRAL CONTROL
TOP & BOTTOM TRIMMNG, 2 X 0,27 KW, AUTOMATIC ADJUSTMENT WHEN SWITCHING FROM STRAIGHT TO ANGLE
CORNER ROUNDING UNIT 1 X 0,35 KW, 12000 RPM, MAX. 3 MM EDGE THICKNESS, WORKPIECE THISCKNESS: MAX. 40 MM, FEEDSPEED 11 M/MIN., MIN WORKPIECE LENGTH: 250 MM.
PROFILE SCRAPING UNIT, QUICK TOOLCHANGE, EDGE THICKNESS: MAX. 3 MM, ELECTRO-PNEUMATIC SETTING BY CENTRAL CONTROL
GLUE SCRAPING UNIT
BUFFING, 2 X 0,09 KW
ELECTRONIC EASY CONTROL EC 10+
INSTALLED OPTIONS:
-TOOLING R= 2 MM
-AUTOMATIC INFEED OF THE EDGES KDX1210 (FAST EXCHANGE OF COIL EDGES)
-CONTOUR TRIMS 4802 WITH VERTICAL ACTION DOING SHELVES
-MULTIPLE TRACING ON THE TOP/BOTTOM TRIMS (IN CASE OF ANGLED WORKPIECES OR DRILLED WORKPIECES)
-SPECIAL TRACING ON THE PROFILE SCRAPERS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-technical data:
-working height | 950 mm
-pneumatic connection | min. 6 bar
-total length | 4.770 mm

work piece and edge parameters:
-workpiece width min:
-at work-piece thickness 12-22 mm | 70 mm *.
-for panel thickness 23-40 mm | 120 mm *.
-at work-piece thickness 60-41 mm / 150 mm *.
* depending on the length of the workpiece
-workpiece overhang | 38 mm
-workpiece thickness. 8-60 mm
-edge height max. work piece height = | + 6 mm
-edge material role. 0.4-3 mm
-edge cross section max.
-for pvc. 135 mm â²
-for veneer | 100 mmâ²
-roll diameter max.        ⦠830 mm
-edge material strip | 0.4-8 mm
-edge cross section max.
-in strips. 360 mm â²
-if no radius is specified, is r = 2 mm
produced and delivered

overview of standard equipment:
gluing unit a8
end trimming unit chamfer/straight 2 x 0.18 kw
milling unit 2 x 0,55 kw counter running
contour trimming unit 1 x 0, 35 kw wd 40
profile scraper
schwabbelaggregat

amenities:
-feed variable 8-14 m / min - motor-driven height adjustment upper pressure
program adjustment compression zone
-quickmelt order unit
-automation package - 2 x multiple roles keying flush milling motor
-2 x special keying for scraper - glue joint scraper
-pu upper pressure rollers instead of rubber rollers
-interface electr. / mechan. zhr 01 /.
zhr 15
 TECHNICAL DATA: -WORKING HEIGHT | 950 MM -PNEUMATIC CONNECTION | MIN. 6 BAR -TOTAL LENGTH | 4.770 MM WORK PIECE AND EDGE PARAMETERS: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM | 70 MM *. -FOR PANEL THICKNESS 23-40 MM | 120 MM *. -AT WORK-PIECE THICKNESS 60-41 MM / 150 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG | 38 MM -WORKPIECE THICKNESS. 8-60 MM -EDGE HEIGHT MAX. WORK PIECE HEIGHT = | + 6 MM -EDGE MATERIAL ROLE. 0.4-3 MM -EDGE CROSS SECTION MAX. -FOR PVC. 135 MM &ACIRC;&SUP2; -FOR VENEER | 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP | 0.4-8 MM -EDGE CROSS SECTION MAX. -IN STRIPS. 360 MM &ACIRC;&SUP2; -IF NO RADIUS IS SPECIFIED, IS R = 2 MM PRODUCED AND DELIVERED OVERVIEW OF STANDARD EQUIPMENT: GLUING UNIT A8 END TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.18 KW MILLING UNIT 2 X 0,55 KW COUNTER RUNNING CONTOUR TRIMMING UNIT 1 X 0, 35 KW WD 40 PROFILE SCRAPER SCHWABBELAGGREGAT AMENITIES: -FEED VARIABLE 8-14 M / MIN - MOTOR-DRIVEN HEIGHT ADJUSTMENT UPPER PRESSURE PROGRAM ADJUSTMENT COMPRESSION ZONE -QUICKMELT ORDER UNIT -AUTOMATION PACKAGE - 2 X MULTIPLE ROLES KEYING FLUSH MILLING MOTOR -2 X SPECIAL KEYING FOR SCRAPER - GLUE JOINT SCRAPER -PU UPPER PRESSURE ROLLERS INSTEAD OF RUBBER ROLLERS -INTERFACE ELECTR. / MECHAN. ZHR 01 /. ZHR 15
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-panel thickness: 12 - 60 mm<br/>feed speed: 18 - 24 m/min<br/>edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood<br/><br/>equipment: <br/>help carriage feeding the panels rectangular<br/>automatic fence at the infeed<br/>squaring device: 2 x 3,0 kw<br/>panel edge pre-heater<br/>hot melt unit: qa34 / a20 <br/>edge magazine <br/>lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers<br/>end trims hl83, programmable change straight/chamfer, 2 motors 0,5 kw<br/>rough trimming: 2 x 1,5 kw<br/>top/bottom fine trimming, tilting, 2 x 0,4 kw<br/>contour trimming fk 13, 2 x 0,4 kw, with 8-fold toolchangers<br/>universal milling motor 4kw <br/>profile scrapers<br/>flat scrapers<br/>buffing unit with oscillation<br/>controlls: homatic nc16 PANEL THICKNESS: 12 - 60 MM
FEED SPEED: 18 - 24 M/MIN
EDGE THICKNESS: 0,4 - 3 MM FOR COIL EDGES, 0,4 - 20 MM FOR STRIPS / SOLID WOOD

EQUIPMENT:
HELP CARRIAGE FEEDING THE PANELS RECTANGULAR
AUTOMATIC FENCE AT THE INFEED
SQUARING DEVICE: 2 X 3,0 KW
PANEL EDGE PRE-HEATER
HOT MELT UNIT: QA34 / A20
EDGE MAGAZINE
LATERAL PRESSURE ROLLERS, THICKNESS PROGRAMMABLE, 1 DRIVEN, 6 NON-DRIVEN ROLLERS
END TRIMS HL83, PROGRAMMABLE CHANGE STRAIGHT/CHAMFER, 2 MOTORS 0,5 KW
ROUGH TRIMMING: 2 X 1,5 KW
TOP/BOTTOM FINE TRIMMING, TILTING, 2 X 0,4 KW
CONTOUR TRIMMING FK 13, 2 X 0,4 KW, WITH 8-FOLD TOOLCHANGERS
UNIVERSAL MILLING MOTOR 4KW
PROFILE SCRAPERS
FLAT SCRAPERS
BUFFING UNIT WITH OSCILLATION
CONTROLLS: HOMATIC NC16
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-single-sided machine to the fã¼gefrã¤sen straight workpiece edges, gluing and manipulating various edging materials from the reel or strip, up to 20 mm edge thickness, longitudinal and transverse flow.

fixed left stop page.

equipment:
-transport chain for transporting parts
-motorized height-adjustable top pressure - trimming unit with 2 motors 3 kw
-melting glue gluing part a20 (melting glue unit qa34) for rolls
up to 3 mm and strip material up to 20 mm
-automatic adjustment of compression zone
-trimming unit chamfer/straight
-workpiece support in a scissor version,
extendable approx. 1000 mm
-carriage for insertion of workpieces, right-angle fold-down
-chip channel in the machine base
-control nc 21
-automatic adjustment infeed fence
-anti-caking agent sprayer top/bottom
-automatic adjustment of hl81/83
to the elect. pneum.. convert a chamfer on straight and infinitely variable adjustment of the side caps stop to the chamfer caps with different thickness of edges.
-pneumatic adjustment caps motor side
-milling unit with pneum 1.5 kw. adjustment
-contour trimming unit fk 11 with autom. adjustment and interchangeable heads
-for plasters in direction profile with pneum. adjustment
-for plasters in direction joint with pneum. adjustment
-buffing unit up and down

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-soil conditions must comply with the foundation plan SINGLE-SIDED MACHINE TO THE F&ATILDE;&FRAC14;GEFR&ATILDE;&CURREN;SEN STRAIGHT WORKPIECE EDGES, GLUING AND MANIPULATING VARIOUS EDGING MATERIALS FROM THE REEL OR STRIP, UP TO 20 MM EDGE THICKNESS, LONGITUDINAL AND TRANSVERSE FLOW. FIXED LEFT STOP PAGE. EQUIPMENT: -TRANSPORT CHAIN FOR TRANSPORTING PARTS -MOTORIZED HEIGHT-ADJUSTABLE TOP PRESSURE - TRIMMING UNIT WITH 2 MOTORS 3 KW -MELTING GLUE GLUING PART A20 (MELTING GLUE UNIT QA34) FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -TRIMMING UNIT CHAMFER/STRAIGHT -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE APPROX. 1000 MM -CARRIAGE FOR INSERTION OF WORKPIECES, RIGHT-ANGLE FOLD-DOWN -CHIP CHANNEL IN THE MACHINE BASE -CONTROL NC 21 -AUTOMATIC ADJUSTMENT INFEED FENCE -ANTI-CAKING AGENT SPRAYER TOP/BOTTOM -AUTOMATIC ADJUSTMENT OF HL81/83 TO THE ELECT. PNEUM.. CONVERT A CHAMFER ON STRAIGHT AND INFINITELY VARIABLE ADJUSTMENT OF THE SIDE CAPS STOP TO THE CHAMFER CAPS WITH DIFFERENT THICKNESS OF EDGES. -PNEUMATIC ADJUSTMENT CAPS MOTOR SIDE -MILLING UNIT WITH PNEUM 1.5 KW. ADJUSTMENT -CONTOUR TRIMMING UNIT FK 11 WITH AUTOM. ADJUSTMENT AND INTERCHANGEABLE HEADS -FOR PLASTERS IN DIRECTION PROFILE WITH PNEUM. ADJUSTMENT -FOR PLASTERS IN DIRECTION JOINT WITH PNEUM. ADJUSTMENT -BUFFING UNIT UP AND DOWN TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-edgebanding line consisting of the following elements:<br/>- infeed table profi tb 10/15/20<br/>- single-sided edgebander profi kr10/16/qa<br/>- return conveyor profi zhr10/s<br/><br/>workpiece dimensions (limited by infeed table):<br/>workpiece thickness: 12-60 mm<br/>length min. 250 mm, max 250 mm<br/>width: min. 220 mm, max 1200 mm <br/><br/>workpiece dimensions for edge bander with manual handling:<br/>length min 250 mm, max 4200 mm<br/>width min 55 mm (long side), max 1200 mm<br/><br/>equipment profi kr10/16/qa<br/>- feeding system si14 for length- and crossfeed of the panels<br/>- formatting on portal left of machine, 4 kw motor, max 1300 mm<br/>- spraying station release agent<br/>- pre-milling 2 x 4,5 kw<br/>- a34 gluing station<br/>- magazine a3 for 6 coils and strips<br/>- pressure zone c with 1-driven and 6 idle rollers<br/>- workpiece preheating<br/>- end trims wk 13, 2 motors each 0,8kw <br/>- rough trimming 2 x 0,55 kw<br/>- contour trimming fk11 automatically chamfer / radius with kombitool<br/>- scraping unit pn20 pneumatic adjustment<br/>- finish unit fa11, consisting of:<br/>  glue scrapers<br/>  sprayer cleaning agent<br/>  buffing<br/>controlls pc21<br/>option to change machine programm between 2 panels EDGEBANDING LINE CONSISTING OF THE FOLLOWING ELEMENTS:
- INFEED TABLE PROFI TB 10/15/20
- SINGLE-SIDED EDGEBANDER PROFI KR10/16/QA
- RETURN CONVEYOR PROFI ZHR10/S

WORKPIECE DIMENSIONS (LIMITED BY INFEED TABLE):
WORKPIECE THICKNESS: 12-60 MM
LENGTH MIN. 250 MM, MAX 250 MM
WIDTH: MIN. 220 MM, MAX 1200 MM

WORKPIECE DIMENSIONS FOR EDGE BANDER WITH MANUAL HANDLING:
LENGTH MIN 250 MM, MAX 4200 MM
WIDTH MIN 55 MM (LONG SIDE), MAX 1200 MM

EQUIPMENT PROFI KR10/16/QA
- FEEDING SYSTEM SI14 FOR LENGTH- AND CROSSFEED OF THE PANELS
- FORMATTING ON PORTAL LEFT OF MACHINE, 4 KW MOTOR, MAX 1300 MM
- SPRAYING STATION RELEASE AGENT
- PRE-MILLING 2 X 4,5 KW
- A34 GLUING STATION
- MAGAZINE A3 FOR 6 COILS AND STRIPS
- PRESSURE ZONE C WITH 1-DRIVEN AND 6 IDLE ROLLERS
- WORKPIECE PREHEATING
- END TRIMS WK 13, 2 MOTORS EACH 0,8KW
- ROUGH TRIMMING 2 X 0,55 KW
- CONTOUR TRIMMING FK11 AUTOMATICALLY CHAMFER / RADIUS WITH KOMBITOOL
- SCRAPING UNIT PN20 PNEUMATIC ADJUSTMENT
- FINISH UNIT FA11, CONSISTING OF:
GLUE SCRAPERS
SPRAYER CLEANING AGENT
BUFFING
CONTROLLS PC21
OPTION TO CHANGE MACHINE PROGRAMM BETWEEN 2 PANELS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom:

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual

i - change head kit manually adjustable
-2 exchange heads
-for manual adjustment on the different
edge thicknesses for chamfer milling or the
manual setup of chamfer milling on
radius milling
-maximum thickness of edges of chamfer radius tool:
-r 1.5 = 0.6 mm
-r 2.0 = 0.8 mm
-if r 3.0 = 1.0 mm
-chamfer angle 15 degrees

3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edge

3.8 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

other accessories

carriage
folding for the rectangular insertion of workpieces at unilateral editing.
workpiece dimension 500 x 1600 mm

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment of straigt on
straight line caps
-pneumatic adjustment of the cap motors
to flush - or ã?bestandskappen
-pneumatic adjustment before milling unit
to flush - or excess of jurisdiction milling
-automatic adjustment of straigt on
radius milling shape milling
-pneumatic adjustment pn10 and fa11
to the side driving away from the
workspace
-electronic height adjustment

workpiece management for fk device
with additional clamping workpiece length
min. 120 mm 
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM: 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL I - CHANGE HEAD KIT MANUALLY ADJUSTABLE -2 EXCHANGE HEADS -FOR MANUAL ADJUSTMENT ON THE DIFFERENT EDGE THICKNESSES FOR CHAMFER MILLING OR THE MANUAL SETUP OF CHAMFER MILLING ON RADIUS MILLING -MAXIMUM THICKNESS OF EDGES OF CHAMFER RADIUS TOOL: -R 1.5 = 0.6 MM -R 2.0 = 0.8 MM -IF R 3.0 = 1.0 MM -CHAMFER ANGLE 15 DEGREES 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGE 3.8 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: OTHER ACCESSORIES CARRIAGE FOLDING FOR THE RECTANGULAR INSERTION OF WORKPIECES AT UNILATERAL EDITING. WORKPIECE DIMENSION 500 X 1600 MM WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT OF STRAIGT ON STRAIGHT LINE CAPS -PNEUMATIC ADJUSTMENT OF THE CAP MOTORS TO FLUSH - OR &ATILDE;?BESTANDSKAPPEN -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -AUTOMATIC ADJUSTMENT OF STRAIGT ON RADIUS MILLING SHAPE MILLING -PNEUMATIC ADJUSTMENT PN10 AND FA11 TO THE SIDE DRIVING AWAY FROM THE WORKSPACE -ELECTRONIC HEIGHT ADJUSTMENT WORKPIECE MANAGEMENT FOR FK DEVICE WITH ADDITIONAL CLAMPING WORKPIECE LENGTH MIN. 120 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-max. wheel diameter:600 mm<br/>max. module:10 <br/>min. module:2 <br/>total power requirement:1,4 kw<br/>weight of the machine ca.:0,68 t<br/>dimensions of the machine ca.:1,6x0,75 m<br/>diameter of hob:15 mm<br/>gear width:140 mm<br/><br/> MAX. WHEEL DIAMETER:600 MM
MAX. MODULE:10
MIN. MODULE:2
TOTAL POWER REQUIREMENT:1,4 KW
WEIGHT OF THE MACHINE CA.:0,68 T
DIMENSIONS OF THE MACHINE CA.:1,6X0,75 M
DIAMETER OF HOB:15 MM
GEAR WIDTH:140 MM

Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk 11 manual
-profile scraper pn10
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk13 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠8545 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.
-order unit with fine fluting-

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual
the following tools was included with delivery:
-i change head set, autom. adjustable - i india radius cutter set for fk r = 2 mm 3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.8 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.9 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

change:
-customized exhaust hoods, so that higher edge overhangs can be driven. example: 25mm 16 mm panel thickness edge height (or 23 mm / 33 mm)

other accessories

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

workpiece support in scissor design
-with roll coating, max. 1000 mm extendable

remote control for ambition

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment before milling unit to flush - or excess of jurisdiction milling
-multi scraper mn21 automatically instead of
2xpn10, to automatically convert different radius or chamfer
-electronic height adjustment

detergent spray unit top/bottom
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL -PROFILE SCRAPER PN10 -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK13 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 8545 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. -ORDER UNIT WITH FINE FLUTING- 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL THE FOLLOWING TOOLS WAS INCLUDED WITH DELIVERY: -I CHANGE HEAD SET, AUTOM. ADJUSTABLE - I INDIA RADIUS CUTTER SET FOR FK R = 2 MM 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.8 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.9 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: CHANGE: -CUSTOMIZED EXHAUST HOODS, SO THAT HIGHER EDGE OVERHANGS CAN BE DRIVEN. EXAMPLE: 25MM 16 MM PANEL THICKNESS EDGE HEIGHT (OR 23 MM / 33 MM) OTHER ACCESSORIES WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. WORKPIECE SUPPORT IN SCISSOR DESIGN -WITH ROLL COATING, MAX. 1000 MM EXTENDABLE REMOTE CONTROL FOR AMBITION AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -MULTI SCRAPER MN21 AUTOMATICALLY INSTEAD OF 2XPN10, TO AUTOMATICALLY CONVERT DIFFERENT RADIUS OR CHAMFER -ELECTRONIC HEIGHT ADJUSTMENT DETERGENT SPRAY UNIT TOP/BOTTOM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 13.800 €
Ubicación: Land-single sided edge banding machine\r\nbrand: homag\r\ntype: optimat kr 77/a20/s2\r\nyear: 2001\r\n\r\nfor egde banding and processing from coil or as strip, up to 20mm edge thickness in lengthwise and crosswise throughfeed.\r\n\r\ntop pressure:\r\n- with driven joined v-belt\r\n- motoric height adjustable with digital position indicator\r\n\r\ncontrol nc21:\r\n- grafic surface for easy programming\r\n\r\ntechnical data:\r\n- feed stepless controllable 18 - 24 m/min.\r\n\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strips max. 0,4 - 20 mm\r\n- edge material coi 0,3 - 3 mm\r\n\r\nrough milling unit\r\n2 motors each 3 kw, 150 hz., 9000 1/min.\r\n\r\nworkpiece pre-heating\r\nto heat the workpiece edge in front of the glue application for a better banding quality\r\n\r\ngluing unit a20:\r\nhotmelt qa34\r\nmelting unit with granulate tank\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø. 150 mm\r\n6 post-pressure rollers Ø. 70 mm\r\n\r\nenn trimming unit hl83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 1/min.\r\n\r\nchip transport belt for optimat\r\n\r\npre-milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 1/min.\r\n\r\nform milling unit fk 13 8-fold automatical\r\nto process the workpiece overhang on the worpiece top and bottom edge as well\r\nfor the milling of the frontal an rear workpiece edge in cooperation with end trimming and pre-milling unit.\r\n2 motors each 0,55 kw, 200 hz., 12000 1/min.\r\nautomatical 8-fold tool changer.\r\n\r\nuniversal milling unit 4 kw controlled optimat\r\ninstalled on the rear side at milling stand.\r\ncros support with spindle adjustment.\r\n1 motor 4 kw, 150 hz., 9000 1/min.\r\nswivable max. 90 degrees.\r\nincl. intermediate support electro pneumatical controlled\r\n\r\nmulti-post cleaning device mn 21 automatc\r\nfor max. 3 different profiles.\r\ntracing from top, bottom and side to chamfer milling or rounding from pre-milled pvc-edges.\r\nblowing nozzles electro pneumatical controlled.\r\n\r\npost cleaning device glued joint\r\nremove of glue rests in the area of the glued joint. tracing from top and bottom.\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KR 77/A20/S2\R\NYEAR: 2001\R\N\R\NFOR EGDE BANDING AND PROCESSING FROM COIL OR AS STRIP, UP TO 20MM EDGE THICKNESS IN LENGTHWISE AND CROSSWISE THROUGHFEED.\R\N\R\NTOP PRESSURE:\R\N- WITH DRIVEN JOINED V-BELT\R\N- MOTORIC HEIGHT ADJUSTABLE WITH DIGITAL POSITION INDICATOR\R\N\R\NCONTROL NC21:\R\N- GRAFIC SURFACE FOR EASY PROGRAMMING\R\N\R\NTECHNICAL DATA:\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN.\R\N\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIPS MAX. 0,4 - 20 MM\R\N- EDGE MATERIAL COI 0,3 - 3 MM\R\N\R\NROUGH MILLING UNIT\R\N2 MOTORS EACH 3 KW, 150 HZ., 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING\R\NTO HEAT THE WORKPIECE EDGE IN FRONT OF THE GLUE APPLICATION FOR A BETTER BANDING QUALITY\R\N\R\NGLUING UNIT A20:\R\NHOTMELT QA34\R\NMELTING UNIT WITH GRANULATE TANK\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø. 150 MM\R\N6 POST-PRESSURE ROLLERS Ø. 70 MM\R\N\R\NENN TRIMMING UNIT HL83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NCHIP TRANSPORT BELT FOR OPTIMAT\R\N\R\NPRE-MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NFORM MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NTO PROCESS THE WORKPIECE OVERHANG ON THE WORPIECE TOP AND BOTTOM EDGE AS WELL\R\NFOR THE MILLING OF THE FRONTAL AN REAR WORKPIECE EDGE IN COOPERATION WITH END TRIMMING AND PRE-MILLING UNIT.\R\N2 MOTORS EACH 0,55 KW, 200 HZ., 12000 1/MIN.\R\NAUTOMATICAL 8-FOLD TOOL CHANGER.\R\N\R\NUNIVERSAL MILLING UNIT 4 KW CONTROLLED OPTIMAT\R\NINSTALLED ON THE REAR SIDE AT MILLING STAND.\R\NCROS SUPPORT WITH SPINDLE ADJUSTMENT.\R\N1 MOTOR 4 KW, 150 HZ., 9000 1/MIN.\R\NSWIVABLE MAX. 90 DEGREES.\R\NINCL. INTERMEDIATE SUPPORT ELECTRO PNEUMATICAL CONTROLLED\R\N\R\NMULTI-POST CLEANING DEVICE MN 21 AUTOMATC\R\NFOR MAX. 3 DIFFERENT PROFILES.\R\NTRACING FROM TOP, BOTTOM AND SIDE TO CHAMFER MILLING OR ROUNDING FROM PRE-MILLED PVC-EDGES.\R\NBLOWING NOZZLES ELECTRO PNEUMATICAL CONTROLLED.\R\N\R\NPOST CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF THE GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overview of the unit assembly:-trimming unit 2 x 2.2 kw
-gluing unit a8
-trimming unit chamfer / straight 2 x 0.18 kw
-pneum.. adjustment caps chamfer/straight
-milling unit 2 x 0,55 kw 0 â°
-pneum.. 2-point adjustment - multifunction-contour trimming unit 2 x 0,4 kw - profile scraper with quick change heads - pneum. adjustment scraper - glue joint scraper
-buffing unit

facilities
-motorized adjustable infeed fence. extended to 300 mm
-automatic edge feeder
-motorized height adjustment
-pneum.. controlled entry lock
-workpiece support up to 600 mm telescopic
-control powercontrol pc 20 +.

technical data
-workpiece width min: - at work-piece thickness 8-22 mm 70 mm * - for panel thickness 23-40 mm 120 mm * - workpiece thickness 41-60 mm 150 mm * * depending on the length of workpiece - workpiece overhang 38 mm - thickness 8-60 mm - edge height max. = workpiece height + 6 mm - edge material  roll 0.4-3 mm - edge cross section max. 
-for pvc 135 mm 2 - for veneer 100 mmâ² - roll diameter of maximum 830 mm - edge material strip 0.4-8 mm - edge cross section max. 
-in strip 360 mmâ² - feed 8 - 14 m/min - feed max form milling machine 14 m/min - working height 950 mm - min. 6 bar - pneumatic connection total length 5.270 mm 
 OVERVIEW OF THE UNIT ASSEMBLY:-TRIMMING UNIT 2 X 2.2 KW -GLUING UNIT A8 -TRIMMING UNIT CHAMFER / STRAIGHT 2 X 0.18 KW -PNEUM.. ADJUSTMENT CAPS CHAMFER/STRAIGHT -MILLING UNIT 2 X 0,55 KW 0 &ACIRC;&DEG; -PNEUM.. 2-POINT ADJUSTMENT - MULTIFUNCTION-CONTOUR TRIMMING UNIT 2 X 0,4 KW - PROFILE SCRAPER WITH QUICK CHANGE HEADS - PNEUM. ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER -BUFFING UNIT FACILITIES -MOTORIZED ADJUSTABLE INFEED FENCE. EXTENDED TO 300 MM -AUTOMATIC EDGE FEEDER -MOTORIZED HEIGHT ADJUSTMENT -PNEUM.. CONTROLLED ENTRY LOCK -WORKPIECE SUPPORT UP TO 600 MM TELESCOPIC -CONTROL POWERCONTROL PC 20 +. TECHNICAL DATA -WORKPIECE WIDTH MIN: - AT WORK-PIECE THICKNESS 8-22 MM 70 MM * - FOR PANEL THICKNESS 23-40 MM 120 MM * - WORKPIECE THICKNESS 41-60 MM 150 MM * * DEPENDING ON THE LENGTH OF WORKPIECE - WORKPIECE OVERHANG 38 MM - THICKNESS 8-60 MM - EDGE HEIGHT MAX. = WORKPIECE HEIGHT + 6 MM - EDGE MATERIAL ROLL 0.4-3 MM - EDGE CROSS SECTION MAX. -FOR PVC 135 MM 2 - FOR VENEER 100 MM&ACIRC;&SUP2; - ROLL DIAMETER OF MAXIMUM 830 MM - EDGE MATERIAL STRIP 0.4-8 MM - EDGE CROSS SECTION MAX. -IN STRIP 360 MM&ACIRC;&SUP2; - FEED 8 - 14 M/MIN - FEED MAX FORM MILLING MACHINE 14 M/MIN - WORKING HEIGHT 950 MM - MIN. 6 BAR - PNEUMATIC CONNECTION TOTAL LENGTH 5.270 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-single sided edge banding machine\r\nbrand: ima\r\ntype: novimat/compact//i/g80/700/l12/\r\nyear: 2017\r\n\r\ntechnical data:\r\nadjustable axis for autom. adjustments of the infeed fence\r\nfeeding table approx. 500x500 mm\r\nanti-stick solvent application\r\n\r\npre-milling unit wit 2 motors á 4 kw\r\n\r\npre-melting unit approx. 1 l\r\nautomatical granulate supply\r\nautomatical pu melting system quickmelt\r\n5 post-pressure rollers\r\n\r\nend trimming unit swivable from 0° or 8° with 2 motors\r\n\r\nmilling unit with 2 motors\r\n- rough-/flush milling\r\n- profile-/chamfer milling\r\n\r\ncontour trimming unit with 4 motors\r\n\r\nprofile-/flat scraping unit\r\n\r\nbuffing unit\r\n\r\nfeed locking for a workpiece return\r\n\r\nworkpiece: \r\nmin. length 150 mm\r\nmin. width 65mm (at max. 3mm edge)\r\nmin thickness: 8mm/12mm with profile scraper, max. 60mm\r\n\r\nedge material: paper, plastic (foil just with additional equipment) and veneer\r\n\r\ncontrol: icos open\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: IMA\R\NTYPE: NOVIMAT/COMPACT//I/G80/700/L12/\R\NYEAR: 2017\R\N\R\NTECHNICAL DATA:\R\NADJUSTABLE AXIS FOR AUTOM. ADJUSTMENTS OF THE INFEED FENCE\R\NFEEDING TABLE APPROX. 500X500 MM\R\NANTI-STICK SOLVENT APPLICATION\R\N\R\NPRE-MILLING UNIT WIT 2 MOTORS á 4 KW\R\N\R\NPRE-MELTING UNIT APPROX. 1 L\R\NAUTOMATICAL GRANULATE SUPPLY\R\NAUTOMATICAL PU MELTING SYSTEM QUICKMELT\R\N5 POST-PRESSURE ROLLERS\R\N\R\NEND TRIMMING UNIT SWIVABLE FROM 0° OR 8° WITH 2 MOTORS\R\N\R\NMILLING UNIT WITH 2 MOTORS\R\N- ROUGH-/FLUSH MILLING\R\N- PROFILE-/CHAMFER MILLING\R\N\R\NCONTOUR TRIMMING UNIT WITH 4 MOTORS\R\N\R\NPROFILE-/FLAT SCRAPING UNIT\R\N\R\NBUFFING UNIT\R\N\R\NFEED LOCKING FOR A WORKPIECE RETURN\R\N\R\NWORKPIECE: \R\NMIN. LENGTH 150 MM\R\NMIN. WIDTH 65MM (AT MAX. 3MM EDGE)\R\NMIN THICKNESS: 8MM/12MM WITH PROFILE SCRAPER, MAX. 60MM\R\N\R\NEDGE MATERIAL: PAPER, PLASTIC (FOIL JUST WITH ADDITIONAL EQUIPMENT) AND VENEER\R\N\R\NCONTROL: ICOS OPEN\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-facilities
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-hl83 facet/straight unit
-extension running 500 mm
-workpiece support in a scissor version,
extendable up to 1000 mm
-autom. adjustment of the pressure zone
-pneum.. adjustment cap motor
-pneum.. adjustment of chamfer/straight
-milling unit 1.5 kw
-pneum.. adjustment before milling unit
-contour trimming unit fk 11 manual
i-wechelkopfsatz for profile milling
slide bevel cutter set for fk11 20 degrees (1st movement)
slide radius cutter set for fk11 r2 (2nd movement)
-for plasters in direction profile
-pneum.. adjustment for cleaning
-for plasters in direction glue joint
-use control glue grout scraper
-buffing unit up and down
-electr. height adjustment

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar FACILITIES -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -HL83 FACET/STRAIGHT UNIT -EXTENSION RUNNING 500 MM -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE UP TO 1000 MM -AUTOM. ADJUSTMENT OF THE PRESSURE ZONE -PNEUM.. ADJUSTMENT CAP MOTOR -PNEUM.. ADJUSTMENT OF CHAMFER/STRAIGHT -MILLING UNIT 1.5 KW -PNEUM.. ADJUSTMENT BEFORE MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL I-WECHELKOPFSATZ FOR PROFILE MILLING SLIDE BEVEL CUTTER SET FOR FK11 20 DEGREES (1ST MOVEMENT) SLIDE RADIUS CUTTER SET FOR FK11 R2 (2ND MOVEMENT) -FOR PLASTERS IN DIRECTION PROFILE -PNEUM.. ADJUSTMENT FOR CLEANING -FOR PLASTERS IN DIRECTION GLUE JOINT -USE CONTROL GLUE GROUT SCRAPER -BUFFING UNIT UP AND DOWN -ELECTR. HEIGHT ADJUSTMENT TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure: 50 t<br/>chamfer lenght: 2550 mm<br/><br/><br/><br/><br/> PRESSURE: 50 T
CHAMFER LENGHT: 2550 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-quickmelt gluing unit, glue specifying finely dosed glue role (either equal to or gegenlauf)
-auto. edge magazine rolls and lengths
-reinforced before cap scissors
-heavy pressure zone with main roller (pneumatic pressurizes) and 3 reprinted roles, including program adjustment
-motor adjustable - and height-adjustable top pressure
-electronic controller pc 20 +
-modem for remote service/maintenance
-noise control panel
-hood interior lighting
-infeed fence extended about adjustable program, and around 300 mm
-auto. edge feeder
-release indication workpiece
-trimming unit of 2 x 2, 2 kw, 200 hz, - auto-package ii for 2 fraes-machines
-chamfer/straight, with pneum unit. 
2-point adjustment
-milling unit 2 x 0,55 kw 0 degrees
-milling unit 2 x 0, 55 kw synchronous operation, program adjustment on edge thickness
-contour trimming unit up + down arrow 2 x 0, 35 kw
-scraping unit (chamfer/rounding) with quick change heads
-surface scraper (joint)
-detergent specifying workpiece
-buffing unit, 2 engines

technical data (basic machine):
edge thickness 0.4-12 mm
roll away 3 x 45 mm
or 0.8 x 65 mm
workpiece thickness 8-60 mm
feed variable 8 - 16 m / min.
(*) when you select the form thrower takes place
automatic switching to 11 m / min.
electric 400 v - 3 ph - 50 hz.
pneumatic connection of min. 6 bar
connected load approx. 15,5 kw
total length 6,360 mm
 FACILITIES: -QUICKMELT GLUING UNIT, GLUE SPECIFYING FINELY DOSED GLUE ROLE (EITHER EQUAL TO OR GEGENLAUF) -AUTO. EDGE MAGAZINE ROLLS AND LENGTHS -REINFORCED BEFORE CAP SCISSORS -HEAVY PRESSURE ZONE WITH MAIN ROLLER (PNEUMATIC PRESSURIZES) AND 3 REPRINTED ROLES, INCLUDING PROGRAM ADJUSTMENT -MOTOR ADJUSTABLE - AND HEIGHT-ADJUSTABLE TOP PRESSURE -ELECTRONIC CONTROLLER PC 20 + -MODEM FOR REMOTE SERVICE/MAINTENANCE -NOISE CONTROL PANEL -HOOD INTERIOR LIGHTING -INFEED FENCE EXTENDED ABOUT ADJUSTABLE PROGRAM, AND AROUND 300 MM -AUTO. EDGE FEEDER -RELEASE INDICATION WORKPIECE -TRIMMING UNIT OF 2 X 2, 2 KW, 200 HZ, - AUTO-PACKAGE II FOR 2 FRAES-MACHINES -CHAMFER/STRAIGHT, WITH PNEUM UNIT. 2-POINT ADJUSTMENT -MILLING UNIT 2 X 0,55 KW 0 DEGREES -MILLING UNIT 2 X 0, 55 KW SYNCHRONOUS OPERATION, PROGRAM ADJUSTMENT ON EDGE THICKNESS -CONTOUR TRIMMING UNIT UP + DOWN ARROW 2 X 0, 35 KW -SCRAPING UNIT (CHAMFER/ROUNDING) WITH QUICK CHANGE HEADS -SURFACE SCRAPER (JOINT) -DETERGENT SPECIFYING WORKPIECE -BUFFING UNIT, 2 ENGINES TECHNICAL DATA (BASIC MACHINE): EDGE THICKNESS 0.4-12 MM ROLL AWAY 3 X 45 MM OR 0.8 X 65 MM WORKPIECE THICKNESS 8-60 MM FEED VARIABLE 8 - 16 M / MIN. (*) WHEN YOU SELECT THE FORM THROWER TAKES PLACE AUTOMATIC SWITCHING TO 11 M / MIN. ELECTRIC 400 V - 3 PH - 50 HZ. PNEUMATIC CONNECTION OF MIN. 6 BAR CONNECTED LOAD APPROX. 15,5 KW TOTAL LENGTH 6,360 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure: 300 t<br/>chamfer lenght: 6050 mm<br/>control: cybelec modeva 10s <br/>total power requirement: 38 kw<br/>weight of the machine ca.: 33000 kg<br/><br/><br/><br/><br/> PRESSURE: 300 T
CHAMFER LENGHT: 6050 MM
CONTROL: CYBELEC MODEVA 10S
TOTAL POWER REQUIREMENT: 38 KW
WEIGHT OF THE MACHINE CA.: 33000 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-quick change gluing unit (quickmelt)
for hot-melt glue.
-automatic edge magazine
-reinforced before cap scissors
-central adjustable top pressure
-noise control panel

standard unit assembly
-trimming unit chamfer/straight
-milling unit up and down
-fine / radius milling unit up and down
-eckenkopieraggragt
-scraping unit for pvc edges
-buffing unit 2 motors

technical data
edge thickness 0.4-8 mm
roll away 3 x 45 mm
workpiece thickness 8-40 mm
workpiece width of min. 65 mm
workpiece length of min. 160 mm
feed max approx. 11 m / min.
electric 400 v - 3 ph - 50 hz.
pneumatic connection of min. 6 bar
connected load approx. 7 kw
total length 5.240 mm
 FACILITIES: -QUICK CHANGE GLUING UNIT (QUICKMELT) FOR HOT-MELT GLUE. -AUTOMATIC EDGE MAGAZINE -REINFORCED BEFORE CAP SCISSORS -CENTRAL ADJUSTABLE TOP PRESSURE -NOISE CONTROL PANEL STANDARD UNIT ASSEMBLY -TRIMMING UNIT CHAMFER/STRAIGHT -MILLING UNIT UP AND DOWN -FINE / RADIUS MILLING UNIT UP AND DOWN -ECKENKOPIERAGGRAGT -SCRAPING UNIT FOR PVC EDGES -BUFFING UNIT 2 MOTORS TECHNICAL DATA EDGE THICKNESS 0.4-8 MM ROLL AWAY 3 X 45 MM WORKPIECE THICKNESS 8-40 MM WORKPIECE WIDTH OF MIN. 65 MM WORKPIECE LENGTH OF MIN. 160 MM FEED MAX APPROX. 11 M / MIN. ELECTRIC 400 V - 3 PH - 50 HZ. PNEUMATIC CONNECTION OF MIN. 6 BAR CONNECTED LOAD APPROX. 7 KW TOTAL LENGTH 5.240 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3050 mm<br/>control: cybelec modeva 10s <br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3050 MM
CONTROL: CYBELEC MODEVA 10S




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit
-glue joint scraper
-schwabbelaggregat

power contraol pc 22

technical data:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

amenities:
-workpiece support scissor design kal
210/6
-workpiece thickness 60 mm site. 40 mm
-workpiece thickness 8 mm kal200/300/kfl500
-order unit pu (changeable
-qa glue container front piece (removable)
-automation package chamfer/radius
kal210/6/a20
-vertical double roll keying
-work guide for fk device
i change head set for form milling fk
-i india radius cutter set r = 1,5-3 mm ambition
-detergent spraying unit top/bottom
ambition
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT POWER CONTRAOL PC 22 TECHNICAL DATA: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; AMENITIES: -WORKPIECE SUPPORT SCISSOR DESIGN KAL 210/6 -WORKPIECE THICKNESS 60 MM SITE. 40 MM -WORKPIECE THICKNESS 8 MM KAL200/300/KFL500 -ORDER UNIT PU (CHANGEABLE -QA GLUE CONTAINER FRONT PIECE (REMOVABLE) -AUTOMATION PACKAGE CHAMFER/RADIUS KAL210/6/A20 -VERTICAL DOUBLE ROLL KEYING -WORK GUIDE FOR FK DEVICE I CHANGE HEAD SET FOR FORM MILLING FK -I INDIA RADIUS CUTTER SET R = 1,5-3 MM AMBITION -DETERGENT SPRAYING UNIT TOP/BOTTOM AMBITION
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 5000 x 1000 x 1500 mm<br/>description: single automatic edging machine for application of pvc, abs, melamine, veneer and solid wood edges in strips or rolls.<br> workpiece thickness min. /max.: 10 to 50 mm.<br> max. workpiece width: 60 mm.<br> max. workpiece length: 140 mm.<br> thickness of edge-banding material in rolls min./max.: 0,4 to 3 mm.<br> thickness of edge-banding material: 12 mm.<br> total edge height: 4 mm.<br> <br> glue pot capacity: 2,5 kg.<br> glues types: hot melt.<br> guillotine for cutting rolled banding materials.<br> double end-trimming unit.<br> top and bottom edge trimming unit.<br> tilting top and bottom chamfering unit.<br> glue scraper unit.<br> brush unit.<br> <br> documents included: operation and maintenance manual, spare parts catalogue, electrical sheet, software manual, ce declaration of conformity.<br> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 1000 X 1500 MM
DESCRIPTION: SINGLE AUTOMATIC EDGING MACHINE FOR APPLICATION OF PVC, ABS, MELAMINE, VENEER AND SOLID WOOD EDGES IN STRIPS OR ROLLS.
WORKPIECE THICKNESS MIN. /MAX.: 10 TO 50 MM.
MAX. WORKPIECE WIDTH: 60 MM.
MAX. WORKPIECE LENGTH: 140 MM.
THICKNESS OF EDGE-BANDING MATERIAL IN ROLLS MIN./MAX.: 0,4 TO 3 MM.
THICKNESS OF EDGE-BANDING MATERIAL: 12 MM.
TOTAL EDGE HEIGHT: 4 MM.

GLUE POT CAPACITY: 2,5 KG.
GLUES TYPES: HOT MELT.
GUILLOTINE FOR CUTTING ROLLED BANDING MATERIALS.
DOUBLE END-TRIMMING UNIT.
TOP AND BOTTOM EDGE TRIMMING UNIT.
TILTING TOP AND BOTTOM CHAMFERING UNIT.
GLUE SCRAPER UNIT.
BRUSH UNIT.

DOCUMENTS INCLUDED: OPERATION AND MAINTENANCE MANUAL, SPARE PARTS CATALOGUE, ELECTRICAL SHEET, SOFTWARE MANUAL, CE DECLARATION OF CONFORMITY.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1901 = plater
1907 = momentary nozzle at the bridge
1915 = chamfer cut
1914 pressure - 4 mill =
1915 = chamfer cut
1920 = flush / chamfer
1920 = rounding
1935 = loop, elektropneum. with single - or off dive control, schleifbandgeschw. 22 m/s
1944 eintauchen controlled buffing, aggregate = swivel
2 advance speeds 8 + 16 m / min.
suction connector 160 mm
nominal current 32 a - 16 kw
granupress (granules)
workpiece height min/max6 / 45 mm
workpiece length min. 140 mm
werkstã¼ckbreite60 mm
routes control programmable
edge height max. 66 mm
kantenstã¤rke0, 3-30 mm
edge thickness roll max. 3 mm
lxwxh: 6600 x 1300 x 1720 mm
weight 1700 kg 1901 = PLATER 1907 = MOMENTARY NOZZLE AT THE BRIDGE 1915 = CHAMFER CUT 1914 PRESSURE - 4 MILL = 1915 = CHAMFER CUT 1920 = FLUSH / CHAMFER 1920 = ROUNDING 1935 = LOOP, ELEKTROPNEUM. WITH SINGLE - OR OFF DIVE CONTROL, SCHLEIFBANDGESCHW. 22 M/S 1944 EINTAUCHEN CONTROLLED BUFFING, AGGREGATE = SWIVEL 2 ADVANCE SPEEDS 8 + 16 M / MIN. SUCTION CONNECTOR 160 MM NOMINAL CURRENT 32 A - 16 KW GRANUPRESS (GRANULES) WORKPIECE HEIGHT MIN/MAX6 / 45 MM WORKPIECE LENGTH MIN. 140 MM WERKST&ATILDE;&FRAC14;CKBREITE60 MM ROUTES CONTROL PROGRAMMABLE EDGE HEIGHT MAX. 66 MM KANTENST&ATILDE;&CURREN;RKE0, 3-30 MM EDGE THICKNESS ROLL MAX. 3 MM LXWXH: 6600 X 1300 X 1720 MM WEIGHT 1700 KG
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>chamfer lenght: 2600 mm<br/>distance between columns: 2100 mm<br/>column arm: 400 mm<br/>ram stroke speed: 200 mm/sec<br/>return speed: 155 mm/sec<br/>work speed: 9,5 mm/min<br/>work stroke: 275 mm<br/>dayligth: 530 mm<br/>oil volume: 150 ltr.<br/>table height: 900 mm<br/>voltage: 400 volt<br/>weight: 5.700 kg<br/>range l-w-h: 3750x1950x2800 mm<br/><br/><br/><br/><br/> PRESSURE: 100 T
CHAMFER LENGHT: 2600 MM
DISTANCE BETWEEN COLUMNS: 2100 MM
COLUMN ARM: 400 MM
RAM STROKE SPEED: 200 MM/SEC
RETURN SPEED: 155 MM/SEC
WORK SPEED: 9,5 MM/MIN
WORK STROKE: 275 MM
DAYLIGTH: 530 MM
OIL VOLUME: 150 LTR.
TABLE HEIGHT: 900 MM
VOLTAGE: 400 VOLT
WEIGHT: 5.700 KG
RANGE L-W-H: 3750X1950X2800 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-1250 kw cummins super silent enclosed diesel power packages
fifteen (15) cummins qsk45 diesel engine, stamford generator, 1250 kw, 50 hz/60 hz, dual frequency, 20 ft. super silent soundproof isolated enclosed packages, lots of options with these power packages. built in fuel tanks, integrated exhaust system, integrated radiator water cooled system, control system, synchronization system to connect with the main power or other generator sets, certified for shipping world wide as a normal shipping container. excellent condition, priced for immediate sale. contact us for more information before they are sold.
1250 KW CUMMINS SUPER SILENT ENCLOSED DIESEL POWER PACKAGES FIFTEEN (15) CUMMINS QSK45 DIESEL ENGINE, STAMFORD GENERATOR, 1250 KW, 50 HZ/60 HZ, DUAL FREQUENCY, 20 FT. SUPER SILENT SOUNDPROOF ISOLATED ENCLOSED PACKAGES, LOTS OF OPTIONS WITH THESE POWER PACKAGES. BUILT IN FUEL TANKS, INTEGRATED EXHAUST SYSTEM, INTEGRATED RADIATOR WATER COOLED SYSTEM, CONTROL SYSTEM, SYNCHRONIZATION SYSTEM TO CONNECT WITH THE MAIN POWER OR OTHER GENERATOR SETS, CERTIFIED FOR SHIPPING WORLD WIDE AS A NORMAL SHIPPING CONTAINER. EXCELLENT CONDITION, PRICED FOR IMMEDIATE SALE. CONTACT US FOR MORE INFORMATION BEFORE THEY ARE SOLD.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-pressure: 170 t<br/>chamfer lenght: 4200 mm<br/>distance between columns: 3760 mm<br/>stroke: 200 mm<br/>dayligth: 400 mm<br/>ajustment speed: 100 mm/sec<br/>working feed: 8 mm/sec<br/>return speed: 81 mm/sec<br/>tank capacity: 180 ltr.<br/>total power requirement: 16,0 kw<br/>weight of the machine ca.: 12.500 kg.<br/><br/><br/><br/><br/> PRESSURE: 170 T
CHAMFER LENGHT: 4200 MM
DISTANCE BETWEEN COLUMNS: 3760 MM
STROKE: 200 MM
DAYLIGTH: 400 MM
AJUSTMENT SPEED: 100 MM/SEC
WORKING FEED: 8 MM/SEC
RETURN SPEED: 81 MM/SEC
TANK CAPACITY: 180 LTR.
TOTAL POWER REQUIREMENT: 16,0 KW
WEIGHT OF THE MACHINE CA.: 12.500 KG.




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-1250 kw cummins super silent enclosed diesel power packages
fifteen (15) cummins qsk45 diesel engine, stamford generator, 1250 kw, 50 hz/60 hz, dual frequency, 20 ft. super silent soundproof isolated enclosed packages, lots of options with these power packages. built in fuel tanks, integrated exhaust system, integrated radiator water cooled system, control system, synchronization system to connect with the main power or other generator sets, certified for shipping world wide as a normal shipping container. excellent condition, priced for immediate sale. contact us for more information before they are sold.
1250 KW CUMMINS SUPER SILENT ENCLOSED DIESEL POWER PACKAGES FIFTEEN (15) CUMMINS QSK45 DIESEL ENGINE, STAMFORD GENERATOR, 1250 KW, 50 HZ/60 HZ, DUAL FREQUENCY, 20 FT. SUPER SILENT SOUNDPROOF ISOLATED ENCLOSED PACKAGES, LOTS OF OPTIONS WITH THESE POWER PACKAGES. BUILT IN FUEL TANKS, INTEGRATED EXHAUST SYSTEM, INTEGRATED RADIATOR WATER COOLED SYSTEM, CONTROL SYSTEM, SYNCHRONIZATION SYSTEM TO CONNECT WITH THE MAIN POWER OR OTHER GENERATOR SETS, CERTIFIED FOR SHIPPING WORLD WIDE AS A NORMAL SHIPPING CONTAINER. EXCELLENT CONDITION, PRICED FOR IMMEDIATE SALE. CONTACT US FOR MORE INFORMATION BEFORE THEY ARE SOLD.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>chamfer lenght: 3300 mm<br/>distance between columns: 2700 mm<br/>rapid traverse: 80,0 mm/sec<br/>working feed: 0 - 14 mm/sec<br/>return speed: 110 mm/sec<br/>stroke: 220 mm<br/>dayligth: 410 mm<br/>throat: 300 mm<br/>work height max.: 900 mm<br/>oil volume: 160 ltr.<br/>engine output: 10,0 kw<br/>back stop - adjustable: 500 mm<br/>weight of the machine ca.: 7.500 kg.<br/>dimensions of the machine ca.: 3600 x 2110 x 2730 mm<br/><br/><br/><br/><br/><br/> PRESSURE: 100 T
CHAMFER LENGHT: 3300 MM
DISTANCE BETWEEN COLUMNS: 2700 MM
RAPID TRAVERSE: 80,0 MM/SEC
WORKING FEED: 0 - 14 MM/SEC
RETURN SPEED: 110 MM/SEC
STROKE: 220 MM
DAYLIGTH: 410 MM
THROAT: 300 MM
WORK HEIGHT MAX.: 900 MM
OIL VOLUME: 160 LTR.
ENGINE OUTPUT: 10,0 KW
BACK STOP - ADJUSTABLE: 500 MM
WEIGHT OF THE MACHINE CA.: 7.500 KG.
DIMENSIONS OF THE MACHINE CA.: 3600 X 2110 X 2730 MM





Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-planing plant of ledinek superles 400 6v + 4f s80 with mechanization

used planing plant of ledinek superles entstapellung multiple caps saw and stappelmechanisirung kallfass

manufacturer: ledinek
year of construction: 2004
type: superles 400 6v + 4f-s80
condition: good, ready to use, can be visited
location: de
availability: immediately

technical data:

working dimensions:
working width: 70-400 mm
working thickness: 19-300 mm
working length: min. 2.000 mm
table height: 1000 mm
feed speed: 20-80 m / min.
* ruler is 8 mm on the feed rollers. clamping length of min. 120 mm.

drive motors
dressing shaft: 37 kw
thickness wave: 45 kw
vertical shaft left: 30 kw
vertical shaft right: 37 kw
chamfer 4 x 3 kw 12 kw
profiling shafts 2 x 30 kw 60 kw
feed: 30 kw
hub gear motor: 2.2 kw
total installed power: 262kw
all spindle with engine brake

tools:
the horizontal shaft speed: 5.000 rpm
the vertical spindle speed: 5,500 rpm
speed of roll forming waves: 6.000 rpm
chamfer mills: 9.000 rpm
vertical spindle diameter: 50 mm
tool clamping length: 150 mm

diameter of tools:
horizontal shaft: 205 mm
vertical spindle: 160-225 mm
joint diameter: 200-205 mm
profile shaft spindle 140-300 (50) mm
chamfer mills 140 / 45â° x10mm

tension decrease normally (with full working width)
dressing shaft max.: 10 mm (4 mm)
thickness shaft max.: 16 mm (5 mm)
vertical shaft left max: 16 mm (5 mm)
vertical shaft right max: 10 mm (5 mm)
chamfer size max: 6 mm / 45â°

operating voltage 400 v / 50 hz
instalierte power: 262 kw
compressed air: 6 bar
pneumatic component: festo
control cabinet according to vde,
component: siemens, klã¶ckner-mã¶ller, telemecanique

soundproof cabin of lighting, window with double glazed windows,
noise reduction about 15db
service crane in the cabin
tool grinding machine is sold

operator panel
with simatic op77b operation panel and all operator buttons. free-standing.

dust nozzle:
horizontal: 1 x 200mm, 1 x 250mm
vertical: 4 x 200mm
chamfer mills 4 x 80 mm
extraction speed: min 30 m / s

weight: 19000 kg

price on request PLANING PLANT OF LEDINEK SUPERLES 400 6V + 4F S80 WITH MECHANIZATION USED PLANING PLANT OF LEDINEK SUPERLES ENTSTAPELLUNG MULTIPLE CAPS SAW AND STAPPELMECHANISIRUNG KALLFASS MANUFACTURER: LEDINEK YEAR OF CONSTRUCTION: 2004 TYPE: SUPERLES 400 6V + 4F-S80 CONDITION: GOOD, READY TO USE, CAN BE VISITED LOCATION: DE AVAILABILITY: IMMEDIATELY TECHNICAL DATA: WORKING DIMENSIONS: WORKING WIDTH: 70-400 MM WORKING THICKNESS: 19-300 MM WORKING LENGTH: MIN. 2.000 MM TABLE HEIGHT: 1000 MM FEED SPEED: 20-80 M / MIN. * RULER IS 8 MM ON THE FEED ROLLERS. CLAMPING LENGTH OF MIN. 120 MM. DRIVE MOTORS DRESSING SHAFT: 37 KW THICKNESS WAVE: 45 KW VERTICAL SHAFT LEFT: 30 KW VERTICAL SHAFT RIGHT: 37 KW CHAMFER 4 X 3 KW 12 KW PROFILING SHAFTS 2 X 30 KW 60 KW FEED: 30 KW HUB GEAR MOTOR: 2.2 KW TOTAL INSTALLED POWER: 262KW ALL SPINDLE WITH ENGINE BRAKE TOOLS: THE HORIZONTAL SHAFT SPEED: 5.000 RPM THE VERTICAL SPINDLE SPEED: 5,500 RPM SPEED OF ROLL FORMING WAVES: 6.000 RPM CHAMFER MILLS: 9.000 RPM VERTICAL SPINDLE DIAMETER: 50 MM TOOL CLAMPING LENGTH: 150 MM DIAMETER OF TOOLS: HORIZONTAL SHAFT: 205 MM VERTICAL SPINDLE: 160-225 MM JOINT DIAMETER: 200-205 MM PROFILE SHAFT SPINDLE 140-300 (50) MM CHAMFER MILLS 140 / 45&ACIRC;&DEG; X10MM TENSION DECREASE NORMALLY (WITH FULL WORKING WIDTH) DRESSING SHAFT MAX.: 10 MM (4 MM) THICKNESS SHAFT MAX.: 16 MM (5 MM) VERTICAL SHAFT LEFT MAX: 16 MM (5 MM) VERTICAL SHAFT RIGHT MAX: 10 MM (5 MM) CHAMFER SIZE MAX: 6 MM / 45&ACIRC;&DEG; OPERATING VOLTAGE 400 V / 50 HZ INSTALIERTE POWER: 262 KW COMPRESSED AIR: 6 BAR PNEUMATIC COMPONENT: FESTO CONTROL CABINET ACCORDING TO VDE, COMPONENT: SIEMENS, KL&ATILDE;&PARA;CKNER-M&ATILDE;&PARA;LLER, TELEMECANIQUE SOUNDPROOF CABIN OF LIGHTING, WINDOW WITH DOUBLE GLAZED WINDOWS, NOISE REDUCTION ABOUT 15DB SERVICE CRANE IN THE CABIN TOOL GRINDING MACHINE IS SOLD OPERATOR PANEL WITH SIMATIC OP77B OPERATION PANEL AND ALL OPERATOR BUTTONS. FREE-STANDING. DUST NOZZLE: HORIZONTAL: 1 X 200MM, 1 X 250MM VERTICAL: 4 X 200MM CHAMFER MILLS 4 X 80 MM EXTRACTION SPEED: MIN 30 M / S WEIGHT: 19000 KG PRICE ON REQUEST
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3500 mm<br/>stroke: 340 mm<br/>throat: 210 mm<br/>dayligth: 550 mm<br/>weight of the machine ca.: 16 t<br/>dimensions of the machine ca.:  4,00 x 2,40 x 3,18 m<br/>equipment:<br/>- control: dnc90<br/>- 2 movable support arms<br/>- central crowning<br/>- controlled axes: y1, y2, x, x1, z1, z2, r<br/>- upper tool about 3000mm, divided<br/>- block die 3000mm: v6, v32, v10, v36, v16, v24<br/><br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3500 MM
STROKE: 340 MM
THROAT: 210 MM
DAYLIGTH: 550 MM
WEIGHT OF THE MACHINE CA.: 16 T
DIMENSIONS OF THE MACHINE CA.: 4,00 X 2,40 X 3,18 M
EQUIPMENT:
- CONTROL: DNC90
- 2 MOVABLE SUPPORT ARMS
- CENTRAL CROWNING
- CONTROLLED AXES: Y1, Y2, X, X1, Z1, Z2, R
- UPPER TOOL ABOUT 3000MM, DIVIDED
- BLOCK DIE 3000MM: V6, V32, V10, V36, V16, V24





Vendedor: Frech GmbH
Año de construcción: usado
Ubicación: Land-we offer a chp mtu type g12v4000l61 for sale. scope of delivery: cabinet, gas line, muffler, plattwã¤rmetausscher and documents. the chp had been until its closure in the operation and is functional.

technical data:

engine: mtu
type: g12v4000l61
power: 1200 kw
year of construction: 2005
hours of operation: 52.000 h

builder: stamford
capacity: 1550 kva, 1500 rpm, 400 v, 50 hz

WE OFFER A CHP MTU TYPE G12V4000L61 FOR SALE. SCOPE OF DELIVERY: CABINET, GAS LINE, MUFFLER, PLATTW&ATILDE;&CURREN;RMETAUSSCHER AND DOCUMENTS. THE CHP HAD BEEN UNTIL ITS CLOSURE IN THE OPERATION AND IS FUNCTIONAL. TECHNICAL DATA: ENGINE: MTU TYPE: G12V4000L61 POWER: 1200 KW YEAR OF CONSTRUCTION: 2005 HOURS OF OPERATION: 52.000 H BUILDER: STAMFORD CAPACITY: 1550 KVA, 1500 RPM, 400 V, 50 HZ
Vendedor: BA-Generatoren
Año de construcción: usado
Ubicación: Land-pressure: 65 t<br/>chamfer lenght: 2500 mm<br/>distance between columns: 2050 mm<br/>table width: 140 mm<br/>table height: 750 mm<br/>total power requirement: 8 kw<br/>weight of the machine ca.: 4,5 t<br/>dimensions of the machine ca.: 3, x 1,2 x 2,6 m<br/>equipment:<br/>? manual back stop<br/>? upper and lower tools<br/>? 2 manual operation / foot switch<br/><br/><br/><br/><br/><br/> PRESSURE: 65 T
CHAMFER LENGHT: 2500 MM
DISTANCE BETWEEN COLUMNS: 2050 MM
TABLE WIDTH: 140 MM
TABLE HEIGHT: 750 MM
TOTAL POWER REQUIREMENT: 8 KW
WEIGHT OF THE MACHINE CA.: 4,5 T
DIMENSIONS OF THE MACHINE CA.: 3, X 1,2 X 2,6 M
EQUIPMENT:
? MANUAL BACK STOP
? UPPER AND LOWER TOOLS
? 2 MANUAL OPERATION / FOOT SWITCH





Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-minimum panel length 120 mm
min/max thickness 8 / 45 mm
thickness 0,4-6 mm of the edge material
compressed air 6-7 bar
length 4400 mm
minimum panel width 75 mm
eckenrundungsfrã¤saggregat of max 40 mm
feed speed 10 m / min.
8kw 380v power 17a
glue tank with roller
printer manual
end trimming unit with medium frequency motor 12000 rpm and 0,2 of kw, with 2 blades for
front and rear flush caps
universal milling unit with 2 swivel medium frequency motors 0,55 kw (12000 rpm) for
flush-chamfer radius
eckenrundungsfrã¤sggregat fd40 for milling of edges and softforming plates or to the
corners round, with 2 motors per 0.27 kw for manipulating plates 10-40 mm thick and
a length of at least 120 mm
scraping unit with scraping r = 3mm for reworking of pvc edges on machined
radius
buffing unit for polishing of pvc and abs edges
surface scraper
the machine is with an electronic frequency converter and also with a programmable
plc control system equipped with an integrated security program for the supply of the plates. the
setting all the models easily via digital counter. the machine has
also has a sound safety cover, which when opened automatically the machining units
turns off.
missing: owner's manual, wiring diagram MINIMUM PANEL LENGTH 120 MM MIN/MAX THICKNESS 8 / 45 MM THICKNESS 0,4-6 MM OF THE EDGE MATERIAL COMPRESSED AIR 6-7 BAR LENGTH 4400 MM MINIMUM PANEL WIDTH 75 MM ECKENRUNDUNGSFR&ATILDE;&CURREN;SAGGREGAT OF MAX 40 MM FEED SPEED 10 M / MIN. 8KW 380V POWER 17A GLUE TANK WITH ROLLER PRINTER MANUAL END TRIMMING UNIT WITH MEDIUM FREQUENCY MOTOR 12000 RPM AND 0,2 OF KW, WITH 2 BLADES FOR FRONT AND REAR FLUSH CAPS UNIVERSAL MILLING UNIT WITH 2 SWIVEL MEDIUM FREQUENCY MOTORS 0,55 KW (12000 RPM) FOR FLUSH-CHAMFER RADIUS ECKENRUNDUNGSFR&ATILDE;&CURREN;SGGREGAT FD40 FOR MILLING OF EDGES AND SOFTFORMING PLATES OR TO THE CORNERS ROUND, WITH 2 MOTORS PER 0.27 KW FOR MANIPULATING PLATES 10-40 MM THICK AND A LENGTH OF AT LEAST 120 MM SCRAPING UNIT WITH SCRAPING R = 3MM FOR REWORKING OF PVC EDGES ON MACHINED RADIUS BUFFING UNIT FOR POLISHING OF PVC AND ABS EDGES SURFACE SCRAPER THE MACHINE IS WITH AN ELECTRONIC FREQUENCY CONVERTER AND ALSO WITH A PROGRAMMABLE PLC CONTROL SYSTEM EQUIPPED WITH AN INTEGRATED SECURITY PROGRAM FOR THE SUPPLY OF THE PLATES. THE SETTING ALL THE MODELS EASILY VIA DIGITAL COUNTER. THE MACHINE HAS ALSO HAS A SOUND SAFETY COVER, WHICH WHEN OPENED AUTOMATICALLY THE MACHINING UNITS TURNS OFF. MISSING: OWNER'S MANUAL, WIRING DIAGRAM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure:        t<br/>chamfer lenght:  mm<br/>distance between columns:        mm<br/>--------------------------------------------------:  <br/>working range press brake:  <br/>- total force (nominal):    200 to<br/>- working length:   3100 mm<br/>- distance between columns:   2550 mm<br/>bending beam (y-axis):  <br/>- stroke:    200 mm<br/>electrical specifications:  <br/>- total power consumption:     15 kw<br/>dimensions / weights:  <br/>- space requirements -left/right-:   4550 mm<br/>- space requirements -front/back-:   2250 mm<br/>- total height:   2860 mm<br/><br/><br/><br/><br/> PRESSURE: T
CHAMFER LENGHT: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
WORKING RANGE PRESS BRAKE:
- TOTAL FORCE (NOMINAL): 200 TO
- WORKING LENGTH: 3100 MM
- DISTANCE BETWEEN COLUMNS: 2550 MM
BENDING BEAM (Y-AXIS):
- STROKE: 200 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 15 KW
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 4550 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 2250 MM
- TOTAL HEIGHT: 2860 MM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 150.000 USD
Ubicación: Land-there are presently 63 containerized cummins generator sets. diesel fuel. stamford alternator. 20 ft sound proof container with paralleling controls. fuel tank.

-26 units powered by kta50-g3 engine rated 1140kw 400v 1500 rpm. they are capable dual frequency 50/60 hz.

year of manufacture 2010 with less than 1500 hours since new.

-37 units powered by qsk45 engine rated 1000 kw 400v 1500 rpm. they are capable dual frequency 50/60 hz.

year of manufacture 2011 with less than 1800 hours since new. stamford alternator. 20 ft sound proof container with paralleling controls. fuel tank.

price per unit: usd $150,000

THERE ARE PRESENTLY 63 CONTAINERIZED CUMMINS GENERATOR SETS. DIESEL FUEL. STAMFORD ALTERNATOR. 20 FT SOUND PROOF CONTAINER WITH PARALLELING CONTROLS. FUEL TANK. -26 UNITS POWERED BY KTA50-G3 ENGINE RATED 1140KW 400V 1500 RPM. THEY ARE CAPABLE DUAL FREQUENCY 50/60 HZ. YEAR OF MANUFACTURE 2010 WITH LESS THAN 1500 HOURS SINCE NEW. -37 UNITS POWERED BY QSK45 ENGINE RATED 1000 KW 400V 1500 RPM. THEY ARE CAPABLE DUAL FREQUENCY 50/60 HZ. YEAR OF MANUFACTURE 2011 WITH LESS THAN 1800 HOURS SINCE NEW. STAMFORD ALTERNATOR. 20 FT SOUND PROOF CONTAINER WITH PARALLELING CONTROLS. FUEL TANK. PRICE PER UNIT: USD $150,000
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>chamfer lenght:3600 mm<br/>distance between columns:3050 mm<br/>arm length:300 mm<br/>table height:950 mm<br/>daylight opening:655 mm<br/>stroke:315 mm<br/>ajustment speed:125 mm/sec<br/>return speed:69 mm/sec<br/>working feed:10 mm/sec<br/>total power requirement:18,5 kw<br/>weight of the machine ca.:15,0 t<br/>dimensions of the machine ca.:5,0 x 2,1 x 3,2 m<br/><br/> PRESSURE:160 T
CHAMFER LENGHT:3600 MM
DISTANCE BETWEEN COLUMNS:3050 MM
ARM LENGTH:300 MM
TABLE HEIGHT:950 MM
DAYLIGHT OPENING:655 MM
STROKE:315 MM
AJUSTMENT SPEED:125 MM/SEC
RETURN SPEED:69 MM/SEC
WORKING FEED:10 MM/SEC
TOTAL POWER REQUIREMENT:18,5 KW
WEIGHT OF THE MACHINE CA.:15,0 T
DIMENSIONS OF THE MACHINE CA.:5,0 X 2,1 X 3,2 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-used 42 kva generatorset consisting of a deutz f4l912 engine and a stamford alternator.

please contact us regarding pricing and availability.  USED 42 KVA GENERATORSET CONSISTING OF A DEUTZ F4L912 ENGINE AND A STAMFORD ALTERNATOR. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: used machinery auction RESALE 4.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 1800 mm<br/>description: in order to connect oleodynamic flexible hose, pressure 450 t. with a pallet of equipment. size 1200 x 800 x 400 mm, composed of jaws and fittings. composed of 4 components: 1° part: tubomatic mod. t2450 year 1999 s/n 991030, 2° part: miter saw for hose, 3° part: hose chamfering for cable ties insertion, 4° part: pallet of accessories. tubomatic features: power 50 ton, max spread 145 mm, pressing range between 0 and 120 mm, capacity on 6 dn50 spirings (2r13) max length 137 mm, engine power 3,5 hp, power supply 380 v - 50 hz. see photo WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 1800 MM
DESCRIPTION: IN ORDER TO CONNECT OLEODYNAMIC FLEXIBLE HOSE, PRESSURE 450 T. WITH A PALLET OF EQUIPMENT. SIZE 1200 X 800 X 400 MM, COMPOSED OF JAWS AND FITTINGS. COMPOSED OF 4 COMPONENTS: 1° PART: TUBOMATIC MOD. T2450 YEAR 1999 S/N 991030, 2° PART: MITER SAW FOR HOSE, 3° PART: HOSE CHAMFERING FOR CABLE TIES INSERTION, 4° PART: PALLET OF ACCESSORIES. TUBOMATIC FEATURES: POWER 50 TON, MAX SPREAD 145 MM, PRESSING RANGE BETWEEN 0 AND 120 MM, CAPACITY ON 6 DN50 SPIRINGS (2R13) MAX LENGTH 137 MM, ENGINE POWER 3,5 HP, POWER SUPPLY 380 V - 50 HZ. SEE PHOTO
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)