633 ofertas

Año de construcción: usado
Ubicación: Land-general

project no.: 904983
number: 1 pcs.
manufacturer: emag
type: vl 3
control: fanuc 21i-t
year of construction: 2002 (2019)
condition: remanufactured engine

description

turning

maximum swing over bed cover 210 mm
maximum chuck diameter 170 mm
max speed main spindle 1/min 7500
maximum performance main spindle in ed 10-40 / 100% 25/16 kw
maximum torque of main spindle in ed 10-40 / 100% 134/85 nm
spindle diameter in front bearing spindle 80 mm
spindle flange size main spindle gr. 5 (din 55026)
the main spindle unit of x/z axes
travel in x/y/z main spindle unit 400 /-/ 200 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 30 m / min
feed force in the x/y/z main spindle unit 5000 /-/ 5000 n
direct measuring system main spindle unit x/z
full cylinder on the main spindle
gun down
number of stations of which powered 12/0
tool holder in the vdi 40 turret

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
hinged belt chip conveyor
chip conveyor discharge height 1250 mm
rinse the pick-up device
coolant system 80 l/min at 7 bar
rotating part memory band
maximum workpiece diameter (27 pieces with 30-85 mm or 18 pieces with 30-130 mm) mm
max workpiece length 100 mm
automatic central oil lubrication

accessories

1 stk. 3 - jaw chuck (new)

general technical data

operating voltage 400/50 v / hz
total power consumption 28 kva
machine dimensions (lxwxh) approx. 2500 x 1900 x 2300 mm
floor space of throughout the facility lxwxh) approx. 3600 x 1900 x 2300 mm
machine weight 5500 kg

comment

the overhaul of the machine was completed in the february 2019 and includes the following activities:
-new linear bearings including ball circulation shoes in x - and z-axis
-new ball screws including stock in x - and z-axis
-new glass standards in x - and z-axis
-new bearings, seals, and measurement system in the turret
-new spindle and new stator windings (main spindle)
-new hydraulic valves, pipes and pump
-new coolant pump
-new pneumatic lines and valves
-new pipes and valves in centralized lubrication
-new 3 - jaw chuck
-new wiring
-new livery
-etc. (several more new parts)

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904983 NUMBER: 1 PCS. MANUFACTURER: EMAG TYPE: VL 3 CONTROL: FANUC 21I-T YEAR OF CONSTRUCTION: 2002 (2019) CONDITION: REMANUFACTURED ENGINE DESCRIPTION TURNING MAXIMUM SWING OVER BED COVER 210 MM MAXIMUM CHUCK DIAMETER 170 MM MAX SPEED MAIN SPINDLE 1/MIN 7500 MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25/16 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 134/85 NM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 80 MM SPINDLE FLANGE SIZE MAIN SPINDLE GR. 5 (DIN 55026) THE MAIN SPINDLE UNIT OF X/Z AXES TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 400 /-/ 200 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 30 M / MIN FEED FORCE IN THE X/Y/Z MAIN SPINDLE UNIT 5000 /-/ 5000 N DIRECT MEASURING SYSTEM MAIN SPINDLE UNIT X/Z FULL CYLINDER ON THE MAIN SPINDLE GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/0 TOOL HOLDER IN THE VDI 40 TURRET MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM HINGED BELT CHIP CONVEYOR CHIP CONVEYOR DISCHARGE HEIGHT 1250 MM RINSE THE PICK-UP DEVICE COOLANT SYSTEM 80 L/MIN AT 7 BAR ROTATING PART MEMORY BAND MAXIMUM WORKPIECE DIAMETER (27 PIECES WITH 30-85 MM OR 18 PIECES WITH 30-130 MM) MM MAX WORKPIECE LENGTH 100 MM AUTOMATIC CENTRAL OIL LUBRICATION ACCESSORIES 1 STK. 3 - JAW CHUCK (NEW) GENERAL TECHNICAL DATA OPERATING VOLTAGE 400/50 V / HZ TOTAL POWER CONSUMPTION 28 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2500 X 1900 X 2300 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 3600 X 1900 X 2300 MM MACHINE WEIGHT 5500 KG COMMENT THE OVERHAUL OF THE MACHINE WAS COMPLETED IN THE FEBRUARY 2019 AND INCLUDES THE FOLLOWING ACTIVITIES: -NEW LINEAR BEARINGS INCLUDING BALL CIRCULATION SHOES IN X - AND Z-AXIS -NEW BALL SCREWS INCLUDING STOCK IN X - AND Z-AXIS -NEW GLASS STANDARDS IN X - AND Z-AXIS -NEW BEARINGS, SEALS, AND MEASUREMENT SYSTEM IN THE TURRET -NEW SPINDLE AND NEW STATOR WINDINGS (MAIN SPINDLE) -NEW HYDRAULIC VALVES, PIPES AND PUMP -NEW COOLANT PUMP -NEW PNEUMATIC LINES AND VALVES -NEW PIPES AND VALVES IN CENTRALIZED LUBRICATION -NEW 3 - JAW CHUCK -NEW WIRING -NEW LIVERY -ETC. (SEVERAL MORE NEW PARTS) WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 340 mm<br/>swing diameter: 420 mm<br/>turning height: 160 mm<br/>control: siemens 840 d <br/>total power requirement: - kw<br/>weight of the machine ca.: - t<br/>dimensions of the machine ca.: - m<br/><br/><br/><br/><br/> TURNING DIAMETER: 340 MM
SWING DIAMETER: 420 MM
TURNING HEIGHT: 160 MM
CONTROL: SIEMENS 840 D
TOTAL POWER REQUIREMENT: - KW
WEIGHT OF THE MACHINE CA.: - T
DIMENSIONS OF THE MACHINE CA.: - M




Vendedor: ADEM Maschinen GmbH
Año de construcción: usado
Precio: 30.000 GBP
Ubicación: Land-compact design, self-adhesive label applicator with average output of 36,000 containers per hour (60 per minute, depending on container size and type). suitable for the following bottle and label sizes: bottle Ø 16mm-100mm, bottle height 35mm-160mm, label length 20mm-150mm, label height 15mm-80mm. comes with 5 sets of change parts and was previously used for the following products: ampoules 1-2ml, 5ml, 10ml and vials 2ml, 5ml, 10ml. due to its consistent, precise labelling and modular label dispenser design, the esa series is best suited to small bottles and vials as well as ampoules, cartridges and other non-stable containers. all electrical, electronic and plc components are integrated in the machines to save space. depending on the esa 1006 set up the containers are supplied by a machine upstream or by a suitable feed system (stand-alone machines are loaded manually from trays). the feed of the bottles into the working area is controlled by minimum/maximum sensors. the operations are carried out in an intermittent or continuous motion depending on the machine model and set up. to provide more convenience and reliability, the functionality of the label dispenser can be increased by a series of additional checking devices and workstations. this machine has been upgraded and modified to current pharma grade production standards. delta elektronik cd1 servo drive/positioner for controlling the motor torque and speed. laetus luminescence sensor lumat 920 m with camera system. camera system by vision automation a/s installed on machine (camera system manufacturer web site http://www.visionautomation.dk/). allen coder. 220/380v, 2kw, 50hz, 24volt. manuals partilly in german, danish & english and includes electrical diagrams. machine sizes: labeller 2100mm x 2000mm x 2000mm high, approx weight 20kg; control panel  2000mm x 1500mm x 2100mm high, approx weight 100kg. excellent condition - working when removed from production. COMPACT DESIGN, SELF-ADHESIVE LABEL APPLICATOR WITH AVERAGE OUTPUT OF 36,000 CONTAINERS PER HOUR (60 PER MINUTE, DEPENDING ON CONTAINER SIZE AND TYPE). SUITABLE FOR THE FOLLOWING BOTTLE AND LABEL SIZES: BOTTLE Ø 16MM-100MM, BOTTLE HEIGHT 35MM-160MM, LABEL LENGTH 20MM-150MM, LABEL HEIGHT 15MM-80MM. COMES WITH 5 SETS OF CHANGE PARTS AND WAS PREVIOUSLY USED FOR THE FOLLOWING PRODUCTS: AMPOULES 1-2ML, 5ML, 10ML AND VIALS 2ML, 5ML, 10ML. DUE TO ITS CONSISTENT, PRECISE LABELLING AND MODULAR LABEL DISPENSER DESIGN, THE ESA SERIES IS BEST SUITED TO SMALL BOTTLES AND VIALS AS WELL AS AMPOULES, CARTRIDGES AND OTHER NON-STABLE CONTAINERS. ALL ELECTRICAL, ELECTRONIC AND PLC COMPONENTS ARE INTEGRATED IN THE MACHINES TO SAVE SPACE. DEPENDING ON THE ESA 1006 SET UP THE CONTAINERS ARE SUPPLIED BY A MACHINE UPSTREAM OR BY A SUITABLE FEED SYSTEM (STAND-ALONE MACHINES ARE LOADED MANUALLY FROM TRAYS). THE FEED OF THE BOTTLES INTO THE WORKING AREA IS CONTROLLED BY MINIMUM/MAXIMUM SENSORS. THE OPERATIONS ARE CARRIED OUT IN AN INTERMITTENT OR CONTINUOUS MOTION DEPENDING ON THE MACHINE MODEL AND SET UP. TO PROVIDE MORE CONVENIENCE AND RELIABILITY, THE FUNCTIONALITY OF THE LABEL DISPENSER CAN BE INCREASED BY A SERIES OF ADDITIONAL CHECKING DEVICES AND WORKSTATIONS. THIS MACHINE HAS BEEN UPGRADED AND MODIFIED TO CURRENT PHARMA GRADE PRODUCTION STANDARDS. DELTA ELEKTRONIK CD1 SERVO DRIVE/POSITIONER FOR CONTROLLING THE MOTOR TORQUE AND SPEED. LAETUS LUMINESCENCE SENSOR LUMAT 920 M WITH CAMERA SYSTEM. CAMERA SYSTEM BY VISION AUTOMATION A/S INSTALLED ON MACHINE (CAMERA SYSTEM MANUFACTURER WEB SITE HTTP://WWW.VISIONAUTOMATION.DK/). ALLEN CODER. 220/380V, 2KW, 50HZ, 24VOLT. MANUALS PARTILLY IN GERMAN, DANISH & ENGLISH AND INCLUDES ELECTRICAL DIAGRAMS. MACHINE SIZES: LABELLER 2100MM X 2000MM X 2000MM HIGH, APPROX WEIGHT 20KG; CONTROL PANEL 2000MM X 1500MM X 2100MM HIGH, APPROX WEIGHT 100KG. EXCELLENT CONDITION - WORKING WHEN REMOVED FROM PRODUCTION.
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-built in 1994
control: demag nc4
clamping force: 1500 kn (150 t)
screw diameter: 40 mm
maximum dose: 250 cm3
h.t. number: 8
core: 3
fan: 2
input power: 37 kw
oil: 500 l
map: cf card
pressure up to 250 bar
machine weight: 6000 kg BUILT IN 1994 CONTROL: DEMAG NC4 CLAMPING FORCE: 1500 KN (150 T) SCREW DIAMETER: 40 MM MAXIMUM DOSE: 250 CM3 H.T. NUMBER: 8 CORE: 3 FAN: 2 INPUT POWER: 37 KW OIL: 500 L MAP: CF CARD PRESSURE UP TO 250 BAR MACHINE WEIGHT: 6000 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-machine measurements: 750 x 1560 x 880 mm<br/>machine weight: 175 kg<br/>power capacity: 2,5 kw<br/><br/><br/><br/><br/> MACHINE MEASUREMENTS: 750 X 1560 X 880 MM
MACHINE WEIGHT: 175 KG
POWER CAPACITY: 2,5 KW




Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-specification:

manufacturer: vemag
    model: robot 2000 dc
    type: vaccum fillter
    total dimensions:
    -length: 2462 x 2692 (mm)
    -width: 1310 mm
    -height: 1920 mm
    -height with cymbal: 2870mm
    power supply: 400v 50 hz 3ph
    power: 10.2 kw
    material: stainless steel SPECIFICATION: MANUFACTURER: VEMAG MODEL: ROBOT 2000 DC TYPE: VACCUM FILLTER TOTAL DIMENSIONS: -LENGTH: 2462 X 2692 (MM) -WIDTH: 1310 MM -HEIGHT: 1920 MM -HEIGHT WITH CYMBAL: 2870MM POWER SUPPLY: 400V 50 HZ 3PH POWER: 10.2 KW MATERIAL: STAINLESS STEEL
Vendedor: BmgTrade
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 630 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 740 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 5 + 1 <br/>no. of tools in turret 2: 5 + 1 <br/>tool taper: hsk-c63/f80 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c-axis, driven tools, <br/>probe, loading device, chip conveyor, tailstock.<br/>workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 630 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 740 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 5 + 1
NO. OF TOOLS IN TURRET 2: 5 + 1
TOOL TAPER: HSK-C63/F80
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS, DRIVEN TOOLS,
PROBE, LOADING DEVICE, CHIP CONVEYOR, TAILSTOCK.
WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-specification:

producer: vemag
    model: robot 500
    type: vacuum stuffer
    efficiency up to 2500 kg/h
    hopper capacity: 110 l
    power supply: 400v 50 hz 3ph
    power: 4.9 kw
    material: stainless steel SPECIFICATION: PRODUCER: VEMAG MODEL: ROBOT 500 TYPE: VACUUM STUFFER EFFICIENCY UP TO 2500 KG/H HOPPER CAPACITY: 110 L POWER SUPPLY: 400V 50 HZ 3PH POWER: 4.9 KW MATERIAL: STAINLESS STEEL
Vendedor: BmgTrade
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 630 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 740 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 5 + 1 <br/>no. of tools in turret 2: 5 + 1 <br/>tool taper: hsk-c63/f80 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c-axis, driven tools,<br/>probe, loading device, chip conveyor, tailstock.<br/>workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 630 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 740 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 5 + 1
NO. OF TOOLS IN TURRET 2: 5 + 1
TOOL TAPER: HSK-C63/F80
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS, DRIVEN TOOLS,
PROBE, LOADING DEVICE, CHIP CONVEYOR, TAILSTOCK.
WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-vacuum dryer eberl et 16/60 

year of constr. 2006, absolutely as new! 
working hours: heating 1.400 hours, vacuum pump 2.400 hours 
the ideal dryer for drying and post-drying of each wood species in excellent quality. 
the full plant is made in stainless steel and running with electric heating. 

the vacuum dryer is complete ready for use, with electrical heating, inside wagon and loading tracks / slidings. 

inside dimensions: 
diameter of the vessel: 1,6 m 
stacking-length: 6,1 m 
stacking-width: 1,0 m 
stacking-height: 1,23 m 
stacking scope gross: 7,5 m³ 
weight 4 tons 

outside dimensions / transport dimensions: 
total length: 8,7 m 
total width: 1,90 m 
total height: 2,1 m 

electrical power: 16 kwt 
average power consumption 4,5 kwt/h 

vacuum pump busch mm 1142av aqua 
sps control system siemens simatic touch 6es7314-6cf02 
ventilator 2-step
2 pieces electrical heaters each 4 kw 
6 pieces of stick-in-electrodes 
1 water spray nozzle 
domestic waterworks grundfos jp5 
pressure sensore 
air moisture sensor 

all technical data due to manufacturer and manual. 

price ex location in germany – rheinland-pfalz
loading and transport on request. 

used machines without guarantee. 

 VACUUM DRYER EBERL ET 16/60 YEAR OF CONSTR. 2006, ABSOLUTELY AS NEW! WORKING HOURS: HEATING 1.400 HOURS, VACUUM PUMP 2.400 HOURS THE IDEAL DRYER FOR DRYING AND POST-DRYING OF EACH WOOD SPECIES IN EXCELLENT QUALITY. THE FULL PLANT IS MADE IN STAINLESS STEEL AND RUNNING WITH ELECTRIC HEATING. THE VACUUM DRYER IS COMPLETE READY FOR USE, WITH ELECTRICAL HEATING, INSIDE WAGON AND LOADING TRACKS / SLIDINGS. INSIDE DIMENSIONS: DIAMETER OF THE VESSEL: 1,6 M STACKING-LENGTH: 6,1 M STACKING-WIDTH: 1,0 M STACKING-HEIGHT: 1,23 M STACKING SCOPE GROSS: 7,5 M³ WEIGHT 4 TONS OUTSIDE DIMENSIONS / TRANSPORT DIMENSIONS: TOTAL LENGTH: 8,7 M TOTAL WIDTH: 1,90 M TOTAL HEIGHT: 2,1 M ELECTRICAL POWER: 16 KWT AVERAGE POWER CONSUMPTION 4,5 KWT/H VACUUM PUMP BUSCH MM 1142AV AQUA SPS CONTROL SYSTEM SIEMENS SIMATIC TOUCH 6ES7314-6CF02 VENTILATOR 2-STEP 2 PIECES ELECTRICAL HEATERS EACH 4 KW 6 PIECES OF STICK-IN-ELECTRODES 1 WATER SPRAY NOZZLE DOMESTIC WATERWORKS GRUNDFOS JP5 PRESSURE SENSORE AIR MOISTURE SENSOR ALL TECHNICAL DATA DUE TO MANUFACTURER AND MANUAL. PRICE EX LOCATION IN GERMANY – RHEINLAND-PFALZ LOADING AND TRANSPORT ON REQUEST. USED MACHINES WITHOUT GUARANTEE.
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 5.750 €
Ubicación: Land-weight approx.: 2600 kg<br/>dimensions (l x w x h) approx.: 7400 x 2750 x 2480 mm<br/>description: ? cnc machining center<br> ? serial number 8144302<br> ? working area approx. 4400 x 1200 mm<br> ? panel passage height 65 mm<br> ? maximum travel speed in the axes direction x-y-z: 75-45-15 m/min<br> ? tool changer with 6 positions<br> ? main milling spindle hsd es919 with connection iso 30<br> ? saw unit motor 1.80 kw<br> ? vertical drilling spindles in x-axis direction: 14<br> ? vertical drilling spindles in y-axis direction: 5<br> ? horizontal drilling spindles in x-axis direction: 2 + 2<br> ? horizontal drilling spindles in y-axis direction: 2 + 2<br> ? numerical control fagor 8055<br> ? 8 consoles with 20 vacuum suction cups in total<br> ? vacuum pump busch ra 0100 e 501<br> ? the tools that appears in the photos are included WEIGHT APPROX.: 2600 KG
DIMENSIONS (L X W X H) APPROX.: 7400 X 2750 X 2480 MM
DESCRIPTION: ? CNC MACHINING CENTER
? SERIAL NUMBER 8144302
? WORKING AREA APPROX. 4400 X 1200 MM
? PANEL PASSAGE HEIGHT 65 MM
? MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y-Z: 75-45-15 M/MIN
? TOOL CHANGER WITH 6 POSITIONS
? MAIN MILLING SPINDLE HSD ES919 WITH CONNECTION ISO 30
? SAW UNIT MOTOR 1.80 KW
? VERTICAL DRILLING SPINDLES IN X-AXIS DIRECTION: 14
? VERTICAL DRILLING SPINDLES IN Y-AXIS DIRECTION: 5
? HORIZONTAL DRILLING SPINDLES IN X-AXIS DIRECTION: 2 + 2
? HORIZONTAL DRILLING SPINDLES IN Y-AXIS DIRECTION: 2 + 2
? NUMERICAL CONTROL FAGOR 8055
? 8 CONSOLES WITH 20 VACUUM SUCTION CUPS IN TOTAL
? VACUUM PUMP BUSCH RA 0100 E 501
? THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand tinplate production plant
this plant manufactured tinned or special chrome-plated ultra-fine sheet at the world's largest production site for packaging steel. with and without organic coating (such as paint, foil), the material is suitable for a wide variety of packaging solutions.
plate width:	450 - 1600 mm	length:  700 – 4300 mm	thickness: 0.3 – 3.0 mm
consist of: pickling line	regenerating plant  reversing 4-hi cold rolling mill
	skin pass rolling mill		rewinder & edging lines	bell furnaces
	inert gas plants	electrolytic finishing plant	lead-tin coating line
	cut-to-length line 1	coil optimisation line 1		slitter line 
	coil optimisation line 2	
 QTY. 1 SECOND-HAND TINPLATE PRODUCTION PLANT THIS PLANT MANUFACTURED TINNED OR SPECIAL CHROME-PLATED ULTRA-FINE SHEET AT THE WORLD'S LARGEST PRODUCTION SITE FOR PACKAGING STEEL. WITH AND WITHOUT ORGANIC COATING (SUCH AS PAINT, FOIL), THE MATERIAL IS SUITABLE FOR A WIDE VARIETY OF PACKAGING SOLUTIONS. PLATE WIDTH: 450 - 1600 MM LENGTH: 700 – 4300 MM THICKNESS: 0.3 – 3.0 MM CONSIST OF: PICKLING LINE REGENERATING PLANT REVERSING 4-HI COLD ROLLING MILL SKIN PASS ROLLING MILL REWINDER & EDGING LINES BELL FURNACES INERT GAS PLANTS ELECTROLYTIC FINISHING PLANT LEAD-TIN COATING LINE CUT-TO-LENGTH LINE 1 COIL OPTIMISATION LINE 1 SLITTER LINE COIL OPTIMISATION LINE 2
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 3000 x 1000 x 900 mm<br/>description: feeding table WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1000 X 900 MM
DESCRIPTION: FEEDING TABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-load capacity: 1t, without documentation.  LOAD CAPACITY: 1T, WITHOUT DOCUMENTATION.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.250 €
Ubicación: Land-variovac rotary traysealer, type: rotarius vg, serial number: 038.06, machine number: 038, year of construction: 2006, 230/400 v, 50 hz, 13 a, 7 kw, 6 bar, dye: (3x) 223 mm x 88 mm and (1x) 223 mm x 223 mm, film width: 335 mm, busch vacuum pump, total dimensions: 1180 mm x 1160 mm x 1300 mm. VARIOVAC ROTARY TRAYSEALER, TYPE: ROTARIUS VG, SERIAL NUMBER: 038.06, MACHINE NUMBER: 038, YEAR OF CONSTRUCTION: 2006, 230/400 V, 50 HZ, 13 A, 7 KW, 6 BAR, DYE: (3X) 223 MM X 88 MM AND (1X) 223 MM X 223 MM, FILM WIDTH: 335 MM, BUSCH VACUUM PUMP, TOTAL DIMENSIONS: 1180 MM X 1160 MM X 1300 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 800 €
Ubicación: Land-dampers from kã¼ppersbusch, model: nte-182.
fast food steamer floor unit, can also 250 mm, as used stove/oven, fermentation room for gastro norm gn1/1, with maximum depth with sub table with storage, good condition.
dimensions: 790 x 790 x 920 / 1580 mm.
elek. voltage: 380v, elek. power: 24. 45kw.

more info? sign up!
greetings DAMPERS FROM K&ATILDE;&FRAC14;PPERSBUSCH, MODEL: NTE-182. FAST FOOD STEAMER FLOOR UNIT, CAN ALSO 250 MM, AS USED STOVE/OVEN, FERMENTATION ROOM FOR GASTRO NORM GN1/1, WITH MAXIMUM DEPTH WITH SUB TABLE WITH STORAGE, GOOD CONDITION. DIMENSIONS: 790 X 790 X 920 / 1580 MM. ELEK. VOLTAGE: 380V, ELEK. POWER: 24. 45KW. MORE INFO? SIGN UP! GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-busch vacuum pump, type: ra 0255d 5a3, serial number: c1647000555, year of construction: 2016, volume: 250 m³ per hour, 0.5 mbar, dimensions: 1400 mm x 800 mm x 970 mm. BUSCH VACUUM PUMP, TYPE: RA 0255D 5A3, SERIAL NUMBER: C1647000555, YEAR OF CONSTRUCTION: 2016, VOLUME: 250 M³ PER HOUR, 0.5 MBAR, DIMENSIONS: 1400 MM X 800 MM X 970 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-cutting machine for massive wood raimann with multi-blade-saw raimann ks 310 

used, year of constr. 1997 
stack before cutting: 
length max 6000 mm 
width ca. 1200 mm 
height ca. 1200 mm 

dimensions of raw product: 
length 	min. ca. 2000 mm, max. ca. 6000 mm
width 		min. ca. 100 mm, max. ca. 850 mm
thickness 	min. ca. 30 mm, max.	 ca. 100 mm


system includes:

2 piece double roller supports model t/rb

1 piece automatic much circular saw blade type ks 310
chain width 340 mm
saw shaft diameter 65 mm
speed infinitely variable approx. 8-45 m / min

maximum cutting width approx. 310 mm
max band-width ca.650 mm
max cutting height ca.	120 mm
without pressure computing ca. 105 mm
with pressure computing ca. 450 mm
min. panel length ca.300 mm

chain width ca. 340 mm
saw shaft through fair r65 mm
blade bore (keyway 18 x 3.5 mm) 80 mm speed saw shaft ca. 3900 rpm
main motor power 22 kw
saw blade diameter
-minimal250 mm
-up to 360 mm

speed infinitely variable approx. 8-45 m / min feed motor 1,5 kw
working height 900 mm
colour green ral 6021
 required air velocity extraction approx. 30 m/s

additional facilities:

1 set of spacers for much sheet cutting diameter 100 mm consisting steel: 4 mm 1 / 4 x 5 mm / 2 x 10 mm / 2 x 20 mm 3 x 51 mm / 3 x 97 mm
transport chain with spikes, each link 3.
motor saws shaft height adjustment with switch, instead of via hand wheel
widening of the safety hood, band-width max 800, instead of 650 mm
non-system run like the safety hood, belt guard sound-absorbing noise
as well as dämmug of all openings relevant for the sound outlet,
appropriate sound level according to din 45635 of small 85 db (a)
sprocket shaft, extended rear pull-out role below checkered, powered
pressure roller attached from above the printing unit, bouncy stored, not powered
4 diodes laser alignment lights, 15 rnw components for laser alignment lights solid
  
weight net approx. 2250 kg
dimensions length x width x height approx. 2 l x l, 4 x l, 6 m
 
the ks series is the proven precision machine of raimann multi rip saw range. the basic machine, stop running as heavy-gauge steel construction, right, complies with european safety standards (ce), as well as the bg rules regarding dust testing and has the following outstanding features as standard:
-maximum cutting precision through exact transporting parts and extreme smoothness of hardened, prism-run transport chains from high-quality special cast, including automatic adjustable oil pressure chain lubrication and wear-resistant reversal of the chain to the saw blade (backdrop)
adjustment options of transport through double bearing, adjustable upper pressure roller, not driven.
high operating convenience and advantages in the processing of short lengths through independent work piece feeder on early transport chains
highest reliability through the closed permanent with the redirection chain
highest operating safety through 4-way splitter and guard as well as the lateral hood re

1 automatic discharge cross conveyor at/ql + qr / 6000

1 return belt with lateral stop for pieces falling to

1 sorting conveyors, trained as wearing chain conveyors

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

terms of delivery: from bavaria, dismantling by buyer

 CUTTING MACHINE FOR MASSIVE WOOD RAIMANN WITH MULTI-BLADE-SAW RAIMANN KS 310 USED, YEAR OF CONSTR. 1997 STACK BEFORE CUTTING: LENGTH MAX 6000 MM WIDTH CA. 1200 MM HEIGHT CA. 1200 MM DIMENSIONS OF RAW PRODUCT: LENGTH MIN. CA. 2000 MM, MAX. CA. 6000 MM WIDTH MIN. CA. 100 MM, MAX. CA. 850 MM THICKNESS MIN. CA. 30 MM, MAX. CA. 100 MM SYSTEM INCLUDES: 2 PIECE DOUBLE ROLLER SUPPORTS MODEL T/RB 1 PIECE AUTOMATIC MUCH CIRCULAR SAW BLADE TYPE KS 310 CHAIN WIDTH 340 MM SAW SHAFT DIAMETER 65 MM SPEED INFINITELY VARIABLE APPROX. 8-45 M / MIN MAXIMUM CUTTING WIDTH APPROX. 310 MM MAX BAND-WIDTH CA.650 MM MAX CUTTING HEIGHT CA. 120 MM WITHOUT PRESSURE COMPUTING CA. 105 MM WITH PRESSURE COMPUTING CA. 450 MM MIN. PANEL LENGTH CA.300 MM CHAIN WIDTH CA. 340 MM SAW SHAFT THROUGH FAIR R65 MM BLADE BORE (KEYWAY 18 X 3.5 MM) 80 MM SPEED SAW SHAFT CA. 3900 RPM MAIN MOTOR POWER 22 KW SAW BLADE DIAMETER -MINIMAL250 MM -UP TO 360 MM SPEED INFINITELY VARIABLE APPROX. 8-45 M / MIN FEED MOTOR 1,5 KW WORKING HEIGHT 900 MM COLOUR GREEN RAL 6021 REQUIRED AIR VELOCITY EXTRACTION APPROX. 30 M/S ADDITIONAL FACILITIES: 1 SET OF SPACERS FOR MUCH SHEET CUTTING DIAMETER 100 MM CONSISTING STEEL: 4 MM 1 / 4 X 5 MM / 2 X 10 MM / 2 X 20 MM 3 X 51 MM / 3 X 97 MM TRANSPORT CHAIN WITH SPIKES, EACH LINK 3. MOTOR SAWS SHAFT HEIGHT ADJUSTMENT WITH SWITCH, INSTEAD OF VIA HAND WHEEL WIDENING OF THE SAFETY HOOD, BAND-WIDTH MAX 800, INSTEAD OF 650 MM NON-SYSTEM RUN LIKE THE SAFETY HOOD, BELT GUARD SOUND-ABSORBING NOISE AS WELL AS DäMMUG OF ALL OPENINGS RELEVANT FOR THE SOUND OUTLET, APPROPRIATE SOUND LEVEL ACCORDING TO DIN 45635 OF SMALL 85 DB (A) SPROCKET SHAFT, EXTENDED REAR PULL-OUT ROLE BELOW CHECKERED, POWERED PRESSURE ROLLER ATTACHED FROM ABOVE THE PRINTING UNIT, BOUNCY STORED, NOT POWERED 4 DIODES LASER ALIGNMENT LIGHTS, 15 RNW COMPONENTS FOR LASER ALIGNMENT LIGHTS SOLID WEIGHT NET APPROX. 2250 KG DIMENSIONS LENGTH X WIDTH X HEIGHT APPROX. 2 L X L, 4 X L, 6 M THE KS SERIES IS THE PROVEN PRECISION MACHINE OF RAIMANN MULTI RIP SAW RANGE. THE BASIC MACHINE, STOP RUNNING AS HEAVY-GAUGE STEEL CONSTRUCTION, RIGHT, COMPLIES WITH EUROPEAN SAFETY STANDARDS (CE), AS WELL AS THE BG RULES REGARDING DUST TESTING AND HAS THE FOLLOWING OUTSTANDING FEATURES AS STANDARD: -MAXIMUM CUTTING PRECISION THROUGH EXACT TRANSPORTING PARTS AND EXTREME SMOOTHNESS OF HARDENED, PRISM-RUN TRANSPORT CHAINS FROM HIGH-QUALITY SPECIAL CAST, INCLUDING AUTOMATIC ADJUSTABLE OIL PRESSURE CHAIN LUBRICATION AND WEAR-RESISTANT REVERSAL OF THE CHAIN TO THE SAW BLADE (BACKDROP) ADJUSTMENT OPTIONS OF TRANSPORT THROUGH DOUBLE BEARING, ADJUSTABLE UPPER PRESSURE ROLLER, NOT DRIVEN. HIGH OPERATING CONVENIENCE AND ADVANTAGES IN THE PROCESSING OF SHORT LENGTHS THROUGH INDEPENDENT WORK PIECE FEEDER ON EARLY TRANSPORT CHAINS HIGHEST RELIABILITY THROUGH THE CLOSED PERMANENT WITH THE REDIRECTION CHAIN HIGHEST OPERATING SAFETY THROUGH 4-WAY SPLITTER AND GUARD AS WELL AS THE LATERAL HOOD RE 1 AUTOMATIC DISCHARGE CROSS CONVEYOR AT/QL + QR / 6000 1 RETURN BELT WITH LATERAL STOP FOR PIECES FALLING TO 1 SORTING CONVEYORS, TRAINED AS WEARING CHAIN CONVEYORS USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: FROM BAVARIA, DISMANTLING BY BUYER
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-kramer + grebe thermoformer, type: va430l, fabrication number: 500/288, year of construction: 1983, 380 v, 3 ph, 50 hz, 20 a, dye: (8x) 225 mm x 35 mm, plastic wired belt, belt width: 370 mm, busch vacuum pump, type: 040-136, 40 m³ per hour, total dimensions: 6900 mm x 1050 mm x 1900 mm. KRAMER + GREBE THERMOFORMER, TYPE: VA430L, FABRICATION NUMBER: 500/288, YEAR OF CONSTRUCTION: 1983, 380 V, 3 PH, 50 HZ, 20 A, DYE: (8X) 225 MM X 35 MM, PLASTIC WIRED BELT, BELT WIDTH: 370 MM, BUSCH VACUUM PUMP, TYPE: 040-136, 40 M³ PER HOUR, TOTAL DIMENSIONS: 6900 MM X 1050 MM X 1900 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-1 stk. kuppersbusch electric cooking facilities
electric cooking line with: induction wok including wok pan, frying pan, double deep fryer, including baskets and lids, stainless steel cabinet with sliding doors, wok 230 v, 400 v griddle/fryer, abm. wxdxh approx. 300 x 75 x 90 cm 1 STK. KUPPERSBUSCH ELECTRIC COOKING FACILITIES ELECTRIC COOKING LINE WITH: INDUCTION WOK INCLUDING WOK PAN, FRYING PAN, DOUBLE DEEP FRYER, INCLUDING BASKETS AND LIDS, STAINLESS STEEL CABINET WITH SLIDING DOORS, WOK 230 V, 400 V GRIDDLE/FRYER, ABM. WXDXH APPROX. 300 X 75 X 90 CM
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 4.500 €
Ubicación: Land-multivac thermoformer with film rewind, type: r530 mc, machine number: 0150, year of construction: 1993, 380 v, 3 ph, 50 hz, 28 a, 12 kw, index: 275 mm, film width: 420 mm, total dimensions: 14400 mm x 1030 mm x 1800 mm, dimensions rewind: 1400 mm x 900 mm x 1300 mm, suction device for rest film, busch vacuum pump, type: ra 0225, year of construction: 2008, 0.5 mbar, dimensions: 1400 mm x 900 mm x 1300 mm, colora messtechnik chiller, type: fk1500-21.1, number: 2317004, year of construction: 1993, 400 v, 3 ph, refrigerant: r22, dimensions: 650 mm x 880 mm x 1300 mm. MULTIVAC THERMOFORMER WITH FILM REWIND, TYPE: R530 MC, MACHINE NUMBER: 0150, YEAR OF CONSTRUCTION: 1993, 380 V, 3 PH, 50 HZ, 28 A, 12 KW, INDEX: 275 MM, FILM WIDTH: 420 MM, TOTAL DIMENSIONS: 14400 MM X 1030 MM X 1800 MM, DIMENSIONS REWIND: 1400 MM X 900 MM X 1300 MM, SUCTION DEVICE FOR REST FILM, BUSCH VACUUM PUMP, TYPE: RA 0225, YEAR OF CONSTRUCTION: 2008, 0.5 MBAR, DIMENSIONS: 1400 MM X 900 MM X 1300 MM, COLORA MESSTECHNIK CHILLER, TYPE: FK1500-21.1, NUMBER: 2317004, YEAR OF CONSTRUCTION: 1993, 400 V, 3 PH, REFRIGERANT: R22, DIMENSIONS: 650 MM X 880 MM X 1300 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-built in 1994
clamping force: 650 tons
tie bar distance: 900 x 900 mm 
mould opening: 930 mm 
mould height: min. 500 mm / max. 1,200 mm 
shot volume: 4090 cc 
shot weight (ps): 3650 g 
screw diameter: 110 mm 
injection pressure: 1710 bar 
control - nc 3

good condition

more info and photos on request! BUILT IN 1994 CLAMPING FORCE: 650 TONS TIE BAR DISTANCE: 900 X 900 MM MOULD OPENING: 930 MM MOULD HEIGHT: MIN. 500 MM / MAX. 1,200 MM SHOT VOLUME: 4090 CC SHOT WEIGHT (PS): 3650 G SCREW DIAMETER: 110 MM INJECTION PRESSURE: 1710 BAR CONTROL - NC 3 GOOD CONDITION MORE INFO AND PHOTOS ON REQUEST!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 1600 kg<br> - lifting speed: 2 - 10 m/min WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 1600 KG
- LIFTING SPEED: 2 - 10 M/MIN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make/model: demag ergotech system 250-35

yom: 2006

ton: 25

dbtb: 280 x 280
MAKE/MODEL: DEMAG ERGOTECH SYSTEM 250-35 YOM: 2006 TON: 25 DBTB: 280 X 280
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 1600 kg<br> - motor number: 1868796 WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 1600 KG
- MOTOR NUMBER: 1868796
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make/model: demag ergotech system 1100 - 120h 80v

yom: 2001

ton: 110

dbtb: 450 x 450
MAKE/MODEL: DEMAG ERGOTECH SYSTEM 1100 - 120H 80V YOM: 2001 TON: 110 DBTB: 450 X 450
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 1600 kg<br> - lifting speed: 2 - 10 m/min WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 1600 KG
- LIFTING SPEED: 2 - 10 M/MIN
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.750 €
Ubicación: Land-- cooling plant, make hafner-muschler, type: hmk-w 13, water cooled, storage capacity: 55 kwh, max. meltdown capacity: 42 kw, cooling capacity -3°c: 5,5 kw, refrigerant: r407c, incl. second ice water pump, built 2006, standing on pallet 800 x 1200 mm. price 11.750 € 

- cooling aggregate as monobloc: compressor and fan direct assembled on the basin, refrigerant 3 lt, cold carrier (ice water) ~1000 liter, l: 1.500 mm, w: 1.000 mm, h: ca. 1.500 mm. price: 2.450 € - COOLING PLANT, MAKE HAFNER-MUSCHLER, TYPE: HMK-W 13, WATER COOLED, STORAGE CAPACITY: 55 KWH, MAX. MELTDOWN CAPACITY: 42 KW, COOLING CAPACITY -3°C: 5,5 KW, REFRIGERANT: R407C, INCL. SECOND ICE WATER PUMP, BUILT 2006, STANDING ON PALLET 800 X 1200 MM. PRICE 11.750 € - COOLING AGGREGATE AS MONOBLOC: COMPRESSOR AND FAN DIRECT ASSEMBLED ON THE BASIN, REFRIGERANT 3 LT, COLD CARRIER (ICE WATER) ~1000 LITER, L: 1.500 MM, W: 1.000 MM, H: CA. 1.500 MM. PRICE: 2.450 €
Vendedor: Hümmer GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 500 kg<br> - lifting speed: 2,5 m/min<br> - serial number: 5006010 WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 500 KG
- LIFTING SPEED: 2,5 M/MIN
- SERIAL NUMBER: 5006010
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-ice water plant, make hafner-muschler, type: glyesp 55 zb 30, storage capacity: 42 kwh, meltdown capacity: 40 kw, cooling capacity: 5 kw, refrigerant: r404a, watercooled, built 2005. price: 5.900 €
  ICE WATER PLANT, MAKE HAFNER-MUSCHLER, TYPE: GLYESP 55 ZB 30, STORAGE CAPACITY: 42 KWH, MELTDOWN CAPACITY: 40 KW, COOLING CAPACITY: 5 KW, REFRIGERANT: R404A, WATERCOOLED, BUILT 2005. PRICE: 5.900 €
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>swing diameter: 210 mm<br/>turning height: 100 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 6.500 u/min<br/>number of spindles: 2 st.<br/>power capacity at 100 % load: 16,00 kw<br/>spindle head din55026 - size: 5 <br/>spindle diameter in front bearing: 80 mm<br/>spindle distance: 955 mm<br/>travel -x axis: 725 mm<br/>feed x-axis: 1 - 60.000 mm/min<br/>rapid traverse x-axis: 60,00 m/min<br/>feed force x axis: 5.500 n<br/>travel -z axis: 200 mm<br/>feed z-axis: 1 - 30.000 mm/min<br/>rapid traverse z-axis: 30,00 m/min<br/>feed force z axis: 11.000 n<br/>tool turret: 2x 12 <br/>tool taper: cdi 68 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>double spindle vertical lathe with siemens sinumerik840d control, c-axis,<br/>driven tools, minimal quantity lubrication, loading device, chip conveyor.<br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
SWING DIAMETER: 210 MM
TURNING HEIGHT: 100 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 6.500 U/MIN
NUMBER OF SPINDLES: 2 ST.
POWER CAPACITY AT 100 % LOAD: 16,00 KW
SPINDLE HEAD DIN55026 - SIZE: 5
SPINDLE DIAMETER IN FRONT BEARING: 80 MM
SPINDLE DISTANCE: 955 MM
TRAVEL -X AXIS: 725 MM
FEED X-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X-AXIS: 60,00 M/MIN
FEED FORCE X AXIS: 5.500 N
TRAVEL -Z AXIS: 200 MM
FEED Z-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 30,00 M/MIN
FEED FORCE Z AXIS: 11.000 N
TOOL TURRET: 2X 12
TOOL TAPER: CDI 68
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE SPINDLE VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS,
DRIVEN TOOLS, MINIMAL QUANTITY LUBRICATION, LOADING DEVICE, CHIP CONVEYOR.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 53.800 €
Ubicación: Land-10 hl pub brewery plant will be free end of march 2019 with following plant parts:
- mash-/ wort vessel, complete in stainless steel, with agitator, drive from top, gas-direct-heated with burner built 2011; lautertun / whirlpool, in stainless steel, with false bottom, control
- wort cooler, make schmidt bretten, 1-step
- 2 x 10 hl storage tanks, make mueller, lying, coolable, isolated + covered, with armatures, built 2014
- cooling aggregate as monoblock with compressor and fan; ice water plant make hafner-muschler, 42 kwh, built 2005; cooling plant make hafner-muschler, 55 kwh, built 2006
price by total purchase: 53.800 €   10 HL PUB BREWERY PLANT WILL BE FREE END OF MARCH 2019 WITH FOLLOWING PLANT PARTS: - MASH-/ WORT VESSEL, COMPLETE IN STAINLESS STEEL, WITH AGITATOR, DRIVE FROM TOP, GAS-DIRECT-HEATED WITH BURNER BUILT 2011; LAUTERTUN / WHIRLPOOL, IN STAINLESS STEEL, WITH FALSE BOTTOM, CONTROL - WORT COOLER, MAKE SCHMIDT BRETTEN, 1-STEP - 2 X 10 HL STORAGE TANKS, MAKE MUELLER, LYING, COOLABLE, ISOLATED + COVERED, WITH ARMATURES, BUILT 2014 - COOLING AGGREGATE AS MONOBLOCK WITH COMPRESSOR AND FAN; ICE WATER PLANT MAKE HAFNER-MUSCHLER, 42 KWH, BUILT 2005; COOLING PLANT MAKE HAFNER-MUSCHLER, 55 KWH, BUILT 2006 PRICE BY TOTAL PURCHASE: 53.800 €
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>swing diameter: 210 mm<br/>turning height: 100 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 6.500 u/min<br/>number of spindles: 2 st.<br/>power capacity at 100 % load: 16,00 kw<br/>spindle head din55026 - size: 5 <br/>spindle diameter in front bearing: 80 mm<br/>spindle distance: 955 mm<br/>travel -x axis: 725 mm<br/>feed x-axis: 1 - 60.000 mm/min<br/>rapid traverse x-axis: 60,00 m/min<br/>feed force x axis: 5.500 n<br/>travel -z axis: 200 mm<br/>feed z-axis: 1 - 30.000 mm/min<br/>rapid traverse z-axis: 30,00 m/min<br/>feed force z axis: 11.000 n<br/>tool turret: 2x 12 <br/>tool taper: cdi 68 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>double spindle vertical lathe with siemens sinumerik840d control, c-axis,<br/>driven tools, minimal quantity lubrication, loading device, chip conveyor.<br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
SWING DIAMETER: 210 MM
TURNING HEIGHT: 100 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 6.500 U/MIN
NUMBER OF SPINDLES: 2 ST.
POWER CAPACITY AT 100 % LOAD: 16,00 KW
SPINDLE HEAD DIN55026 - SIZE: 5
SPINDLE DIAMETER IN FRONT BEARING: 80 MM
SPINDLE DISTANCE: 955 MM
TRAVEL -X AXIS: 725 MM
FEED X-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X-AXIS: 60,00 M/MIN
FEED FORCE X AXIS: 5.500 N
TRAVEL -Z AXIS: 200 MM
FEED Z-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 30,00 M/MIN
FEED FORCE Z AXIS: 11.000 N
TOOL TURRET: 2X 12
TOOL TAPER: CDI 68
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE SPINDLE VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS,
DRIVEN TOOLS, MINIMAL QUANTITY LUBRICATION, LOADING DEVICE, CHIP CONVEYOR.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-4 pcs demag injection-moulding machines, of which 3 pieces 50 t and 1 100 t.  4 PCS DEMAG INJECTION-MOULDING MACHINES, OF WHICH 3 PIECES 50 T AND 1 100 T.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 13500 x 2300 x 1500 mm<br/>description: max load 10 ton. serial number 505277/90. range approx. 13200 mm <b>(range to be checked on site)</b> WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 13500 X 2300 X 1500 MM
DESCRIPTION: MAX LOAD 10 TON. SERIAL NUMBER 505277/90. RANGE APPROX. 13200 MM (RANGE TO BE CHECKED ON SITE)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ie-bar-set (4) complete for demag et 330 IE-BAR-SET (4) COMPLETE FOR DEMAG ET 330
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 600 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 1.100 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 12 <br/>no. of tools in turret 2: 12 <br/>tool taper: cdi68 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 17,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c axis, <br/>main spindle - counter spindle, driven tools, probe, loading device, <br/>chip conveyor, workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 600 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 1.100 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 12
NO. OF TOOLS IN TURRET 2: 12
TOOL TAPER: CDI68
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 17,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C AXIS,
MAIN SPINDLE - COUNTER SPINDLE, DRIVEN TOOLS, PROBE, LOADING DEVICE,
CHIP CONVEYOR, WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
summary
complete pump set for demag et 330 SUMMARY COMPLETE PUMP SET FOR DEMAG ET 330
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-length:  mm<br/>diameter:  mm<br/>year:  <br/>number: 2 <br/>diameter - coniflex cutter: 60 mm<br/><br/><br/><br/><br/> LENGTH: MM
DIAMETER: MM
YEAR:
NUMBER: 2
DIAMETER - CONIFLEX CUTTER: 60 MM




Vendedor: Aleman Machines e.K.
Año de construcción: usado
Ubicación: Land-complete plastification unit for demag 2.300 unit with 80 mm screw and barrel COMPLETE PLASTIFICATION UNIT FOR DEMAG 2.300 UNIT WITH 80 MM SCREW AND BARREL
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 1.600 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 1800 mm<br/>description: maschine wurde komplett überarbeitet 1994, maschinennummer 17/92, hauptabmessungen: nutenbreite max. 25 mm, nutenlänge max. 200 mm, nutentiefe max. 100 mm, tiefenvorschub stufenlos 0 bis 0,6 mm, aufspanntisch 600 x 250 mm, mit 3 nuten à 16 mm, spindeldrehzahl 380 bis 5000 upm, geschwindigkeit des frässchlittens stufenlos 0,15 bis 1,5 m/min, kraftbedarf 1,7 kw WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 1800 MM
DESCRIPTION: MASCHINE WURDE KOMPLETT üBERARBEITET 1994, MASCHINENNUMMER 17/92, HAUPTABMESSUNGEN: NUTENBREITE MAX. 25 MM, NUTENLäNGE MAX. 200 MM, NUTENTIEFE MAX. 100 MM, TIEFENVORSCHUB STUFENLOS 0 BIS 0,6 MM, AUFSPANNTISCH 600 X 250 MM, MIT 3 NUTEN à 16 MM, SPINDELDREHZAHL 380 BIS 5000 UPM, GESCHWINDIGKEIT DES FRäSSCHLITTENS STUFENLOS 0,15 BIS 1,5 M/MIN, KRAFTBEDARF 1,7 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fix-platen demag et 330 FIX-PLATEN DEMAG ET 330
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-blower, make busch bacuumteknik a.s.[dk], type wa3080co, no 43570 / 931080, new 2005, material mild steel, motor 22/26,4 kw, 400-690/480-630 volt, with air filter, inlet dia.125mm, outlet dia.125mm, mounted on frame, floorspace 1.8x0.8 m, total height 1.6 m, weight 560 kgblowersblowers > blowers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! BLOWER, MAKE BUSCH BACUUMTEKNIK A.S.[DK], TYPE WA3080CO, NO 43570 / 931080, NEW 2005, MATERIAL MILD STEEL, MOTOR 22/26,4 KW, 400-690/480-630 VOLT, WITH AIR FILTER, INLET DIA.125MM, OUTLET DIA.125MM, MOUNTED ON FRAME, FLOORSPACE 1.8X0.8 M, TOTAL HEIGHT 1.6 M, WEIGHT 560 KGBLOWERSBLOWERS > BLOWERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-complete toggle for demag et 330 with reaction plate, and movil plate.
with reaction plate, and movil plate. COMPLETE TOGGLE FOR DEMAG ET 330 WITH REACTION PLATE, AND MOVIL PLATE. WITH REACTION PLATE, AND MOVIL PLATE.
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-make busch vacuumteknik a.s, type wa3100co, no 0009/931100, new 2003, motor, with air filter, inlet, outlet, mounted on frame, floorspace 1.8x1.1 m, total height 1.3 m, weight 650 kgblowersblowers > blowers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE BUSCH VACUUMTEKNIK A.S, TYPE WA3100CO, NO 0009/931100, NEW 2003, MOTOR, WITH AIR FILTER, INLET, OUTLET, MOUNTED ON FRAME, FLOORSPACE 1.8X1.1 M, TOTAL HEIGHT 1.3 M, WEIGHT 650 KGBLOWERSBLOWERS > BLOWERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-emag vsc 250 vertical lathe; yom: 2005.

chuck diameter, max (mm-in): 250/315 - 10/12.5

swing diameter (mm-in): 350 14

workpiece diameter, max (mm-in): 250 10

x-axis travel (mm-in): 745-29.5

y axis travel (mm-in): 300-12. EMAG VSC 250 VERTICAL LATHE; YOM: 2005. CHUCK DIAMETER, MAX (MM-IN): 250/315 - 10/12.5 SWING DIAMETER (MM-IN): 350 14 WORKPIECE DIAMETER, MAX (MM-IN): 250 10 X-AXIS TRAVEL (MM-IN): 745-29.5 Y AXIS TRAVEL (MM-IN): 300-12.
Vendedor: Maynards Europe GmbH
Año de construcción: usado
Ubicación: Land-doppelendprofiler \r\nfabrikat: torwegge\r\ntyp: h 638\r\nbaujahr: 1989\r\n\r\nfür die längs- und querseitige bearbeitung von türen- und massivholzelementen\r\n\r\ntechnische daten:\r\narbeitsbreite: 2600mm\r\narbeitshöhe: 990mm (+20mm zum ausrichten der maschine)\r\n\r\nmotorische breitenverstellung, 3,0 kw\r\n\r\nfrequenzgesteuerter antrieb bis 40 m/min\r\n\r\nmax. durchgangshöhe 120mm\r\nmax. Überstand außerhalb der kettenbahnen: 200mm\r\n\r\nnach vorn verlängerte kettenbahnen für maximal 2200mm werkstückauflage, inkl. anschlag linke seite\r\n\r\narbeitsmotoren\r\n1. ständer vorderseite:\r\n1 sägemotor 6,0 kw\r\n1 e-achse horizontal\r\n\r\n1. ständer rückseite:\r\n1 ritzgerät 2,0 kw \r\n1 elektronische achse horizontal\r\n\r\n2. ständer vorderseite:\r\n1 besäummotor 6,0 / 8,5 kw\r\n1 wahlschaltung für 3000/6000 upm und links- oder rechtslauf\r\n1 elektronikachse horizontal\r\n\r\n2. ständer rückseite:\r\n1 motor zum hobeln 6,0 / 8,5 kw\r\n1 wahlschaltung für 3000/6000 upm und links- oder rechtslauf\r\n1 elektronikachse horizontal und vertikal\r\n\r\n3. ständer vorderseite:\r\n1 falzmotor 6,0 / 8,5 kw\r\n1 wahlschaltung für 3000/6000 upm und links- oder rechtslauf\r\n1 elektronikachse horizontal und vertikal\r\n1 verlängerter motorzapfen 160mm\r\n\r\n3. ständer rückseite:\r\n2. falzmotor 6,0 / 8,5 kw\r\n1 wahlschaltung für 3000/6000 upm und links- oder rechtslauf\r\n1 elektronikachse horizontal und vertikal\r\nschwenkvorrichtung\r\n1 verlängerter motorzapfen 160mm\r\n\r\n4. ständer vorderseite\r\nmehrfachhubspindel zum fräsen von der seite 11 kw, vorgesehen für 4 werkzeuge und für eine max. holzdicke von 56mm\r\nwahlschaltung 3000 / 6000 upm\r\n1 elektronikachse horizontal und vertikal\r\n\r\n4. stünder rückseite:\r\n1 nutfräsmotor 6,0 / 8,5 kw\r\n1 wahlschaltung für 3000/6000 upm und links- oder rechtslauf\r\nschwenkvorrichtung\r\nverlängerter motorzapfen, Ø 40*160mm\r\n\r\nauf geräteträger aufgebaut:\r\nfasfräsgerät (sonderausführung) 0,75kw, tastend von oben bzw. unten und von der seite\r\nelektronkachsen für motore oben und unten\r\nfasfräsgerät (sonderausführung) 0,75kw, motor unten für einfachfalz (für unten- bzw. obenliegenden falz und falzkante mitte).\r\nelektronkachsen horizontal und vertikal\r\n\r\nzusatzeinrichtung: elektronische breitenverstellung und druckbalkenhöhenverstellung\r\n\r\numbau 2009:\r\nsteuerung:\r\naustausch einer s5 steuerung gegen eine s7 300 steuerung:\r\n- ethernet\r\n- teleservice über ethernet\r\n\r\n- satz fotozellen\r\nda die streckensteuerung entfällt werden 6 zusätzliche fotozellen benötigt:\r\n2 für die nachschlagende ritzsäge, 2 für den einauf- und 2 für den auslaufzähler\r\n\r\n- schaltschrank inkl. 2 klimageräte und 16 umrichter\r\n- 1 kettenschmiereinheit\r\n- 1 satz kettenplatten\r\n- 1 satz rund- und flachführungen\r\n- barcodescanner zum aufrufen\r\n\r\n\r\nhinweis:\r\ndie technischen daten und beschreibungen sind abschrift der damaligen auftragsbestätigung. daten dienen zur information und sind nicht verbindlich.\r\n DOPPELENDPROFILER \R\NFABRIKAT: TORWEGGE\R\NTYP: H 638\R\NBAUJAHR: 1989\R\N\R\NFüR DIE LäNGS- UND QUERSEITIGE BEARBEITUNG VON TüREN- UND MASSIVHOLZELEMENTEN\R\N\R\NTECHNISCHE DATEN:\R\NARBEITSBREITE: 2600MM\R\NARBEITSHöHE: 990MM (+20MM ZUM AUSRICHTEN DER MASCHINE)\R\N\R\NMOTORISCHE BREITENVERSTELLUNG, 3,0 KW\R\N\R\NFREQUENZGESTEUERTER ANTRIEB BIS 40 M/MIN\R\N\R\NMAX. DURCHGANGSHöHE 120MM\R\NMAX. ÜBERSTAND AUßERHALB DER KETTENBAHNEN: 200MM\R\N\R\NNACH VORN VERLäNGERTE KETTENBAHNEN FüR MAXIMAL 2200MM WERKSTüCKAUFLAGE, INKL. ANSCHLAG LINKE SEITE\R\N\R\NARBEITSMOTOREN\R\N1. STäNDER VORDERSEITE:\R\N1 SäGEMOTOR 6,0 KW\R\N1 E-ACHSE HORIZONTAL\R\N\R\N1. STäNDER RüCKSEITE:\R\N1 RITZGERäT 2,0 KW \R\N1 ELEKTRONISCHE ACHSE HORIZONTAL\R\N\R\N2. STäNDER VORDERSEITE:\R\N1 BESäUMMOTOR 6,0 / 8,5 KW\R\N1 WAHLSCHALTUNG FüR 3000/6000 UPM UND LINKS- ODER RECHTSLAUF\R\N1 ELEKTRONIKACHSE HORIZONTAL\R\N\R\N2. STäNDER RüCKSEITE:\R\N1 MOTOR ZUM HOBELN 6,0 / 8,5 KW\R\N1 WAHLSCHALTUNG FüR 3000/6000 UPM UND LINKS- ODER RECHTSLAUF\R\N1 ELEKTRONIKACHSE HORIZONTAL UND VERTIKAL\R\N\R\N3. STäNDER VORDERSEITE:\R\N1 FALZMOTOR 6,0 / 8,5 KW\R\N1 WAHLSCHALTUNG FüR 3000/6000 UPM UND LINKS- ODER RECHTSLAUF\R\N1 ELEKTRONIKACHSE HORIZONTAL UND VERTIKAL\R\N1 VERLäNGERTER MOTORZAPFEN 160MM\R\N\R\N3. STäNDER RüCKSEITE:\R\N2. FALZMOTOR 6,0 / 8,5 KW\R\N1 WAHLSCHALTUNG FüR 3000/6000 UPM UND LINKS- ODER RECHTSLAUF\R\N1 ELEKTRONIKACHSE HORIZONTAL UND VERTIKAL\R\NSCHWENKVORRICHTUNG\R\N1 VERLäNGERTER MOTORZAPFEN 160MM\R\N\R\N4. STäNDER VORDERSEITE\R\NMEHRFACHHUBSPINDEL ZUM FRäSEN VON DER SEITE 11 KW, VORGESEHEN FüR 4 WERKZEUGE UND FüR EINE MAX. HOLZDICKE VON 56MM\R\NWAHLSCHALTUNG 3000 / 6000 UPM\R\N1 ELEKTRONIKACHSE HORIZONTAL UND VERTIKAL\R\N\R\N4. STüNDER RüCKSEITE:\R\N1 NUTFRäSMOTOR 6,0 / 8,5 KW\R\N1 WAHLSCHALTUNG FüR 3000/6000 UPM UND LINKS- ODER RECHTSLAUF\R\NSCHWENKVORRICHTUNG\R\NVERLäNGERTER MOTORZAPFEN, Ø 40*160MM\R\N\R\NAUF GERäTETRäGER AUFGEBAUT:\R\NFASFRäSGERäT (SONDERAUSFüHRUNG) 0,75KW, TASTEND VON OBEN BZW. UNTEN UND VON DER SEITE\R\NELEKTRONKACHSEN FüR MOTORE OBEN UND UNTEN\R\NFASFRäSGERäT (SONDERAUSFüHRUNG) 0,75KW, MOTOR UNTEN FüR EINFACHFALZ (FüR UNTEN- BZW. OBENLIEGENDEN FALZ UND FALZKANTE MITTE).\R\NELEKTRONKACHSEN HORIZONTAL UND VERTIKAL\R\N\R\NZUSATZEINRICHTUNG: ELEKTRONISCHE BREITENVERSTELLUNG UND DRUCKBALKENHöHENVERSTELLUNG\R\N\R\NUMBAU 2009:\R\NSTEUERUNG:\R\NAUSTAUSCH EINER S5 STEUERUNG GEGEN EINE S7 300 STEUERUNG:\R\N- ETHERNET\R\N- TELESERVICE üBER ETHERNET\R\N\R\N- SATZ FOTOZELLEN\R\NDA DIE STRECKENSTEUERUNG ENTFäLLT WERDEN 6 ZUSäTZLICHE FOTOZELLEN BENöTIGT:\R\N2 FüR DIE NACHSCHLAGENDE RITZSäGE, 2 FüR DEN EINAUF- UND 2 FüR DEN AUSLAUFZäHLER\R\N\R\N- SCHALTSCHRANK INKL. 2 KLIMAGERäTE UND 16 UMRICHTER\R\N- 1 KETTENSCHMIEREINHEIT\R\N- 1 SATZ KETTENPLATTEN\R\N- 1 SATZ RUND- UND FLACHFüHRUNGEN\R\N- BARCODESCANNER ZUM AUFRUFEN\R\N\R\N\R\NHINWEIS:\R\NDIE TECHNISCHEN DATEN UND BESCHREIBUNGEN SIND ABSCHRIFT DER DAMALIGEN AUFTRAGSBESTäTIGUNG. DATEN DIENEN ZUR INFORMATION UND SIND NICHT VERBINDLICH.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-steuerung: okuma osp-p300m-h
monitor: 15 zoll farb tft-touchscreen

achsen
x-achse verfahrweg mm: 1.550
y-achse verfahrweg mm: 1.600
z-achse verfahrweg mm: 1.650
4.achse: schwenkachse +25 / -115 grad
5.achse: nc-rundtisch, kleinste teilung 0,001 grad
vorschub max. mm/min: 42.000
eilgang max. mm/min: 42.000

palette
abmessung mm:  1.000 x 1.000
werkstückgewicht max. kg: 

spindel
spindeldrehzahl u/min: 4.500
spindel antriebsleistung kw: 40 / 30
drehmoment nm: 1.920 

werkzeugsystem
werkzeugaufnahme: hsk 100
werkzeugmagazin: matrix
werkzeugmagazinplätze stck.: 129
werkzeugwechsler: doppelgreifer
werkzeugdurchmesser mm: 130
werkzeugdurchmesser mit freien nachbarplätzen mm: 315
werkzeuglänge max. mm: 600
werkzeuggewicht max. kg: 30

kühlsystem
kühlung durch die spindel bar: 70
kühlmitteltank liter: 

ausstattung
späneförderer im arbeitsraum
späneförderer mayfran consep 2000 / volumen 1.000liter
kühlmitteldusche im arbeitsraum
kühlmittelzuführung durch die spindel 
kühlmitteldüsen für aussenkühlung
luft durch die spindel
luftdüsen für aussenkühlung
abnehmbares elektronisches handrad
renishaw werkzeugvermessung
renishaw werkstückvermessung
4 ersatzpaletten
ca.80 werkzeughalter hsk-a100
thermische kompensation der hauptspindel
thermische kompensation des konstruktionsaufbaus
cas-kollisionsvermeidungssystem
kugelrollspindelkühlung x, y, z
spindelkopfkühlsystem
direktes, absolutes wegemesssystem in allen achsen
synchronisiertes gewindebohren bis zur maximalen spindeldrehzahl
lastüberwachung beim bohren und gewinde
schwesterwerkzeugverwaltung
werkzeugstandzeitüberwachung
8 stellige werkzeugnummern
programmierbare bedienermeldung
hi-cut pro, nurbs
parameter und variablenprogrammierung
999 werkzeuglängen und radiuskorrekturen
200 werkstücknullpunkte
ethernet schnittstelle 
2 usb schnittstellen
rs232 schnittstelle
zusätzliches betriebssystem windows
ce-konformität

grundmaschine abmessungen / gewicht
länge mm: 10.830
breite mm: 6.880
höhe mm: 3.580
gewicht kg: 57.000
 STEUERUNG: OKUMA OSP-P300M-H MONITOR: 15 ZOLL FARB TFT-TOUCHSCREEN ACHSEN X-ACHSE VERFAHRWEG MM: 1.550 Y-ACHSE VERFAHRWEG MM: 1.600 Z-ACHSE VERFAHRWEG MM: 1.650 4.ACHSE: SCHWENKACHSE +25 / -115 GRAD 5.ACHSE: NC-RUNDTISCH, KLEINSTE TEILUNG 0,001 GRAD VORSCHUB MAX. MM/MIN: 42.000 EILGANG MAX. MM/MIN: 42.000 PALETTE ABMESSUNG MM: 1.000 X 1.000 WERKSTüCKGEWICHT MAX. KG: SPINDEL SPINDELDREHZAHL U/MIN: 4.500 SPINDEL ANTRIEBSLEISTUNG KW: 40 / 30 DREHMOMENT NM: 1.920 WERKZEUGSYSTEM WERKZEUGAUFNAHME: HSK 100 WERKZEUGMAGAZIN: MATRIX WERKZEUGMAGAZINPLäTZE STCK.: 129 WERKZEUGWECHSLER: DOPPELGREIFER WERKZEUGDURCHMESSER MM: 130 WERKZEUGDURCHMESSER MIT FREIEN NACHBARPLäTZEN MM: 315 WERKZEUGLäNGE MAX. MM: 600 WERKZEUGGEWICHT MAX. KG: 30 KüHLSYSTEM KüHLUNG DURCH DIE SPINDEL BAR: 70 KüHLMITTELTANK LITER: AUSSTATTUNG SPäNEFöRDERER IM ARBEITSRAUM SPäNEFöRDERER MAYFRAN CONSEP 2000 / VOLUMEN 1.000LITER KüHLMITTELDUSCHE IM ARBEITSRAUM KüHLMITTELZUFüHRUNG DURCH DIE SPINDEL KüHLMITTELDüSEN FüR AUSSENKüHLUNG LUFT DURCH DIE SPINDEL LUFTDüSEN FüR AUSSENKüHLUNG ABNEHMBARES ELEKTRONISCHES HANDRAD RENISHAW WERKZEUGVERMESSUNG RENISHAW WERKSTüCKVERMESSUNG 4 ERSATZPALETTEN CA.80 WERKZEUGHALTER HSK-A100 THERMISCHE KOMPENSATION DER HAUPTSPINDEL THERMISCHE KOMPENSATION DES KONSTRUKTIONSAUFBAUS CAS-KOLLISIONSVERMEIDUNGSSYSTEM KUGELROLLSPINDELKüHLUNG X, Y, Z SPINDELKOPFKüHLSYSTEM DIREKTES, ABSOLUTES WEGEMESSSYSTEM IN ALLEN ACHSEN SYNCHRONISIERTES GEWINDEBOHREN BIS ZUR MAXIMALEN SPINDELDREHZAHL LASTüBERWACHUNG BEIM BOHREN UND GEWINDE SCHWESTERWERKZEUGVERWALTUNG WERKZEUGSTANDZEITüBERWACHUNG 8 STELLIGE WERKZEUGNUMMERN PROGRAMMIERBARE BEDIENERMELDUNG HI-CUT PRO, NURBS PARAMETER UND VARIABLENPROGRAMMIERUNG 999 WERKZEUGLäNGEN UND RADIUSKORREKTUREN 200 WERKSTüCKNULLPUNKTE ETHERNET SCHNITTSTELLE 2 USB SCHNITTSTELLEN RS232 SCHNITTSTELLE ZUSäTZLICHES BETRIEBSSYSTEM WINDOWS CE-KONFORMITäT GRUNDMASCHINE ABMESSUNGEN / GEWICHT LäNGE MM: 10.830 BREITE MM: 6.880 HöHE MM: 3.580 GEWICHT KG: 57.000
Vendedor: 3axisgroup GmbH
Año de construcción: usado
Precio: 14.400 €
Ubicación: Land-: 450 mm<br/>: 600 x 254 mm<br/>: 600 mm<br/>: 508 x 254 mm<br/>: 200 x 20 x 312 mm<br/>: 180 kg<br/>: 2,2 kw<br/>: 2.200 mm<br/>: 1.800 mm<br/>: 1.850 mm<br/>: 1.800 kg<br/>2-axes digital read-out <br/>grinding wheel with flange <br/>wheel balance arbour <br/>electro-magnetic chuck <br/>hydraulic longitudinal feed <br/>automatic cross feed <br/>automatic vertical feed <br/>automatic demagnetiser <br/>man. parallel wheel dressing device <br/>coolant device <br/>separate hydraulic unit <br/>aut. central lubrication <br/>dressing diamond<br/>operator tools <br/>machine and equipment according to the ce-regulations <br/>user manual in german and english <br/>price for new machine:  ?  19.080,--<br/> <br/><br/><br/><br/>distance spindle-table: 450 mm<br/>table: 600 x 254 mm<br/>longitudinal travel: 600 mm<br/>magnetic clamping plate: 508 x 254 mm<br/>spindle speed: 2.850 r.p.m.<br/>grinding wheel dim.: 200 x 20 x 312 mm<br/>max. work piece weight: 180 kg<br/>spindle motor power: 2,2 kw<br/>length: 2.200 mm<br/>width: 1.800 mm<br/>height: 1.850 mm<br/>weight: 1.800 kg<br/><br/><br/><br/> : 450 MM
: 600 X 254 MM
: 600 MM
: 508 X 254 MM
: 200 X 20 X 312 MM
: 180 KG
: 2,2 KW
: 2.200 MM
: 1.800 MM
: 1.850 MM
: 1.800 KG
2-AXES DIGITAL READ-OUT
GRINDING WHEEL WITH FLANGE
WHEEL BALANCE ARBOUR
ELECTRO-MAGNETIC CHUCK
HYDRAULIC LONGITUDINAL FEED
AUTOMATIC CROSS FEED
AUTOMATIC VERTICAL FEED
AUTOMATIC DEMAGNETISER
MAN. PARALLEL WHEEL DRESSING DEVICE
COOLANT DEVICE
SEPARATE HYDRAULIC UNIT
AUT. CENTRAL LUBRICATION
DRESSING DIAMOND
OPERATOR TOOLS
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH
PRICE FOR NEW MACHINE:  ?  19.080,--




DISTANCE SPINDLE-TABLE: 450 MM
TABLE: 600 X 254 MM
LONGITUDINAL TRAVEL: 600 MM
MAGNETIC CLAMPING PLATE: 508 X 254 MM
SPINDLE SPEED: 2.850 R.P.M.
GRINDING WHEEL DIM.: 200 X 20 X 312 MM
MAX. WORK PIECE WEIGHT: 180 KG
SPINDLE MOTOR POWER: 2,2 KW
LENGTH: 2.200 MM
WIDTH: 1.800 MM
HEIGHT: 1.850 MM
WEIGHT: 1.800 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)