389 ofertas

Año de construcción: usado
Ubicación: Land-load capacity: 1t, without documentation.  LOAD CAPACITY: 1T, WITHOUT DOCUMENTATION.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 630 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 740 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 5 + 1 <br/>no. of tools in turret 2: 5 + 1 <br/>tool taper: hsk-c63/f80 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c-axis, driven tools, <br/>probe, loading device, chip conveyor, tailstock.<br/>workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 630 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 740 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 5 + 1
NO. OF TOOLS IN TURRET 2: 5 + 1
TOOL TAPER: HSK-C63/F80
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS, DRIVEN TOOLS,
PROBE, LOADING DEVICE, CHIP CONVEYOR, TAILSTOCK.
WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-built in 1994
clamping force: 650 tons
tie bar distance: 900 x 900 mm 
mould opening: 930 mm 
mould height: min. 500 mm / max. 1,200 mm 
shot volume: 4090 cc 
shot weight (ps): 3650 g 
screw diameter: 110 mm 
injection pressure: 1710 bar 
control - nc 3

good condition

more info and photos on request! BUILT IN 1994 CLAMPING FORCE: 650 TONS TIE BAR DISTANCE: 900 X 900 MM MOULD OPENING: 930 MM MOULD HEIGHT: MIN. 500 MM / MAX. 1,200 MM SHOT VOLUME: 4090 CC SHOT WEIGHT (PS): 3650 G SCREW DIAMETER: 110 MM INJECTION PRESSURE: 1710 BAR CONTROL - NC 3 GOOD CONDITION MORE INFO AND PHOTOS ON REQUEST!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 630 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 740 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 5 + 1 <br/>no. of tools in turret 2: 5 + 1 <br/>tool taper: hsk-c63/f80 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c-axis, driven tools,<br/>probe, loading device, chip conveyor, tailstock.<br/>workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 630 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 740 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 5 + 1
NO. OF TOOLS IN TURRET 2: 5 + 1
TOOL TAPER: HSK-C63/F80
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS, DRIVEN TOOLS,
PROBE, LOADING DEVICE, CHIP CONVEYOR, TAILSTOCK.
WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-make/model: demag ergotech system 250-35

yom: 2006

ton: 25

dbtb: 280 x 280
MAKE/MODEL: DEMAG ERGOTECH SYSTEM 250-35 YOM: 2006 TON: 25 DBTB: 280 X 280
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 3000 x 1000 x 900 mm<br/>description: feeding table WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1000 X 900 MM
DESCRIPTION: FEEDING TABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make/model: demag ergotech system 1100 - 120h 80v

yom: 2001

ton: 110

dbtb: 450 x 450
MAKE/MODEL: DEMAG ERGOTECH SYSTEM 1100 - 120H 80V YOM: 2001 TON: 110 DBTB: 450 X 450
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 1600 kg<br> - lifting speed: 2 - 10 m/min WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 1600 KG
- LIFTING SPEED: 2 - 10 M/MIN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-4 pcs demag injection-moulding machines, of which 3 pieces 50 t and 1 100 t.  4 PCS DEMAG INJECTION-MOULDING MACHINES, OF WHICH 3 PIECES 50 T AND 1 100 T.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 1600 kg<br> - motor number: 1868796 WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 1600 KG
- MOTOR NUMBER: 1868796
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ie-bar-set (4) complete for demag et 330 IE-BAR-SET (4) COMPLETE FOR DEMAG ET 330
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 1600 kg<br> - lifting speed: 2 - 10 m/min WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 1600 KG
- LIFTING SPEED: 2 - 10 M/MIN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
summary
complete pump set for demag et 330 SUMMARY COMPLETE PUMP SET FOR DEMAG ET 330
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: - lifting capacity: 500 kg<br> - lifting speed: 2,5 m/min<br> - serial number: 5006010 WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: - LIFTING CAPACITY: 500 KG
- LIFTING SPEED: 2,5 M/MIN
- SERIAL NUMBER: 5006010
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete plastification unit for demag 2.300 unit with 80 mm screw and barrel COMPLETE PLASTIFICATION UNIT FOR DEMAG 2.300 UNIT WITH 80 MM SCREW AND BARREL
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>swing diameter: 210 mm<br/>turning height: 100 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 6.500 u/min<br/>number of spindles: 2 st.<br/>power capacity at 100 % load: 16,00 kw<br/>spindle head din55026 - size: 5 <br/>spindle diameter in front bearing: 80 mm<br/>spindle distance: 955 mm<br/>travel -x axis: 725 mm<br/>feed x-axis: 1 - 60.000 mm/min<br/>rapid traverse x-axis: 60,00 m/min<br/>feed force x axis: 5.500 n<br/>travel -z axis: 200 mm<br/>feed z-axis: 1 - 30.000 mm/min<br/>rapid traverse z-axis: 30,00 m/min<br/>feed force z axis: 11.000 n<br/>tool turret: 2x 12 <br/>tool taper: cdi 68 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>double spindle vertical lathe with siemens sinumerik840d control, c-axis,<br/>driven tools, minimal quantity lubrication, loading device, chip conveyor.<br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
SWING DIAMETER: 210 MM
TURNING HEIGHT: 100 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 6.500 U/MIN
NUMBER OF SPINDLES: 2 ST.
POWER CAPACITY AT 100 % LOAD: 16,00 KW
SPINDLE HEAD DIN55026 - SIZE: 5
SPINDLE DIAMETER IN FRONT BEARING: 80 MM
SPINDLE DISTANCE: 955 MM
TRAVEL -X AXIS: 725 MM
FEED X-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X-AXIS: 60,00 M/MIN
FEED FORCE X AXIS: 5.500 N
TRAVEL -Z AXIS: 200 MM
FEED Z-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 30,00 M/MIN
FEED FORCE Z AXIS: 11.000 N
TOOL TURRET: 2X 12
TOOL TAPER: CDI 68
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE SPINDLE VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS,
DRIVEN TOOLS, MINIMAL QUANTITY LUBRICATION, LOADING DEVICE, CHIP CONVEYOR.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-fix-platen demag et 330 FIX-PLATEN DEMAG ET 330
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>swing diameter: 210 mm<br/>turning height: 100 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 6.500 u/min<br/>number of spindles: 2 st.<br/>power capacity at 100 % load: 16,00 kw<br/>spindle head din55026 - size: 5 <br/>spindle diameter in front bearing: 80 mm<br/>spindle distance: 955 mm<br/>travel -x axis: 725 mm<br/>feed x-axis: 1 - 60.000 mm/min<br/>rapid traverse x-axis: 60,00 m/min<br/>feed force x axis: 5.500 n<br/>travel -z axis: 200 mm<br/>feed z-axis: 1 - 30.000 mm/min<br/>rapid traverse z-axis: 30,00 m/min<br/>feed force z axis: 11.000 n<br/>tool turret: 2x 12 <br/>tool taper: cdi 68 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>double spindle vertical lathe with siemens sinumerik840d control, c-axis,<br/>driven tools, minimal quantity lubrication, loading device, chip conveyor.<br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
SWING DIAMETER: 210 MM
TURNING HEIGHT: 100 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 6.500 U/MIN
NUMBER OF SPINDLES: 2 ST.
POWER CAPACITY AT 100 % LOAD: 16,00 KW
SPINDLE HEAD DIN55026 - SIZE: 5
SPINDLE DIAMETER IN FRONT BEARING: 80 MM
SPINDLE DISTANCE: 955 MM
TRAVEL -X AXIS: 725 MM
FEED X-AXIS: 1 - 60.000 MM/MIN
RAPID TRAVERSE X-AXIS: 60,00 M/MIN
FEED FORCE X AXIS: 5.500 N
TRAVEL -Z AXIS: 200 MM
FEED Z-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 30,00 M/MIN
FEED FORCE Z AXIS: 11.000 N
TOOL TURRET: 2X 12
TOOL TAPER: CDI 68
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE SPINDLE VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS,
DRIVEN TOOLS, MINIMAL QUANTITY LUBRICATION, LOADING DEVICE, CHIP CONVEYOR.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-complete toggle for demag et 330 with reaction plate, and movil plate.
with reaction plate, and movil plate. COMPLETE TOGGLE FOR DEMAG ET 330 WITH REACTION PLATE, AND MOVIL PLATE. WITH REACTION PLATE, AND MOVIL PLATE.
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 13500 x 2300 x 1500 mm<br/>description: max load 10 ton. serial number 505277/90. range approx. 13200 mm <b>(range to be checked on site)</b> WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 13500 X 2300 X 1500 MM
DESCRIPTION: MAX LOAD 10 TON. SERIAL NUMBER 505277/90. RANGE APPROX. 13200 MM (RANGE TO BE CHECKED ON SITE)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-emag vsc 250 vertical lathe; yom: 2005.

chuck diameter, max (mm-in): 250/315 - 10/12.5

swing diameter (mm-in): 350 14

workpiece diameter, max (mm-in): 250 10

x-axis travel (mm-in): 745-29.5

y axis travel (mm-in): 300-12. EMAG VSC 250 VERTICAL LATHE; YOM: 2005. CHUCK DIAMETER, MAX (MM-IN): 250/315 - 10/12.5 SWING DIAMETER (MM-IN): 350 14 WORKPIECE DIAMETER, MAX (MM-IN): 250 10 X-AXIS TRAVEL (MM-IN): 745-29.5 Y AXIS TRAVEL (MM-IN): 300-12.
Vendedor: Maynards Europe GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 600 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 1.100 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 12 <br/>no. of tools in turret 2: 12 <br/>tool taper: cdi68 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 17,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c axis, <br/>main spindle - counter spindle, driven tools, probe, loading device, <br/>chip conveyor, workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 600 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 1.100 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 12
NO. OF TOOLS IN TURRET 2: 12
TOOL TAPER: CDI68
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 17,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C AXIS,
MAIN SPINDLE - COUNTER SPINDLE, DRIVEN TOOLS, PROBE, LOADING DEVICE,
CHIP CONVEYOR, WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc vertical lathe (pick-up)

emag vsc630

line consisting of 2 emag vsc 630 vertical pick up cnc lathe, complete with workpiece loading / tilting / unloading
max dia 630mm

mimu machine tools italy linea of composed since torni verticali 2a of mandrino rovescio emag vsc 630 completa di sistema di carico / ribaltamento pezzo / scarico

cnc siemens 840
chuck diameter 630mm
max swing slide 680 mm
x 1150
z 500
spindle motor 74kw max / max 2350 nm
spindle rpm: 2000 max

m3ept
machine is checked and can be inspected under power in our warehouse.

power in our warehouse. 

info?
mi.mu. macchine utensili - machine tools - machine tools
gussago (bs) italy CNC VERTICAL LATHE (PICK-UP) EMAG VSC630 LINE CONSISTING OF 2 EMAG VSC 630 VERTICAL PICK UP CNC LATHE, COMPLETE WITH WORKPIECE LOADING / TILTING / UNLOADING MAX DIA 630MM MIMU MACHINE TOOLS ITALY LINEA OF COMPOSED SINCE TORNI VERTICALI 2A OF MANDRINO ROVESCIO EMAG VSC 630 COMPLETA DI SISTEMA DI CARICO / RIBALTAMENTO PEZZO / SCARICO CNC SIEMENS 840 CHUCK DIAMETER 630MM MAX SWING SLIDE 680 MM X 1150 Z 500 SPINDLE MOTOR 74KW MAX / MAX 2350 NM SPINDLE RPM: 2000 MAX M3EPT MACHINE IS CHECKED AND CAN BE INSPECTED UNDER POWER IN OUR WAREHOUSE. POWER IN OUR WAREHOUSE. INFO? MI.MU. MACCHINE UTENSILI - MACHINE TOOLS - MACHINE TOOLS GUSSAGO (BS) ITALY
Vendedor: Mimu Werkzeugmaschinen
Año de construcción: usado
Precio: 14.400 €
Ubicación: Land-: 450 mm<br/>: 600 x 254 mm<br/>: 600 mm<br/>: 508 x 254 mm<br/>: 200 x 20 x 312 mm<br/>: 180 kg<br/>: 2,2 kw<br/>: 2.200 mm<br/>: 1.800 mm<br/>: 1.850 mm<br/>: 1.800 kg<br/>2-axes digital read-out <br/>grinding wheel with flange <br/>wheel balance arbour <br/>electro-magnetic chuck <br/>hydraulic longitudinal feed <br/>automatic cross feed <br/>automatic vertical feed <br/>automatic demagnetiser <br/>man. parallel wheel dressing device <br/>coolant device <br/>separate hydraulic unit <br/>aut. central lubrication <br/>dressing diamond<br/>operator tools <br/>machine and equipment according to the ce-regulations <br/>user manual in german and english <br/>price for new machine:  ?  19.080,--<br/> <br/><br/><br/><br/>distance spindle-table: 450 mm<br/>table: 600 x 254 mm<br/>longitudinal travel: 600 mm<br/>magnetic clamping plate: 508 x 254 mm<br/>spindle speed: 2.850 r.p.m.<br/>grinding wheel dim.: 200 x 20 x 312 mm<br/>max. work piece weight: 180 kg<br/>spindle motor power: 2,2 kw<br/>length: 2.200 mm<br/>width: 1.800 mm<br/>height: 1.850 mm<br/>weight: 1.800 kg<br/><br/><br/><br/> : 450 MM
: 600 X 254 MM
: 600 MM
: 508 X 254 MM
: 200 X 20 X 312 MM
: 180 KG
: 2,2 KW
: 2.200 MM
: 1.800 MM
: 1.850 MM
: 1.800 KG
2-AXES DIGITAL READ-OUT
GRINDING WHEEL WITH FLANGE
WHEEL BALANCE ARBOUR
ELECTRO-MAGNETIC CHUCK
HYDRAULIC LONGITUDINAL FEED
AUTOMATIC CROSS FEED
AUTOMATIC VERTICAL FEED
AUTOMATIC DEMAGNETISER
MAN. PARALLEL WHEEL DRESSING DEVICE
COOLANT DEVICE
SEPARATE HYDRAULIC UNIT
AUT. CENTRAL LUBRICATION
DRESSING DIAMOND
OPERATOR TOOLS
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH
PRICE FOR NEW MACHINE:  ?  19.080,--




DISTANCE SPINDLE-TABLE: 450 MM
TABLE: 600 X 254 MM
LONGITUDINAL TRAVEL: 600 MM
MAGNETIC CLAMPING PLATE: 508 X 254 MM
SPINDLE SPEED: 2.850 R.P.M.
GRINDING WHEEL DIM.: 200 X 20 X 312 MM
MAX. WORK PIECE WEIGHT: 180 KG
SPINDLE MOTOR POWER: 2,2 KW
LENGTH: 2.200 MM
WIDTH: 1.800 MM
HEIGHT: 1.850 MM
WEIGHT: 1.800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 19.750 £
Ubicación: Land-category: injection moulding
id: 5232
manufacturer: demag
model: 1500-610
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 150
screw diameter (mm): 45mm
max shot weight (ps) (g): 290
control system: nc4 controller
lead time: immediate
hours: circa, 44000.
in production: yes
location: wellingborough, northamptonshire. CATEGORY: INJECTION MOULDING ID: 5232 MANUFACTURER: DEMAG MODEL: 1500-610 VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 150 SCREW DIAMETER (MM): 45MM MAX SHOT WEIGHT (PS) (G): 290 CONTROL SYSTEM: NC4 CONTROLLER LEAD TIME: IMMEDIATE HOURS: CIRCA, 44000. IN PRODUCTION: YES LOCATION: WELLINGBOROUGH, NORTHAMPTONSHIRE.
Vendedor: STVmachinery
Año de construcción: usado
Precio: 22.100 €
Ubicación: Land-: 580 mm<br/>: 810 x 400 mm<br/>: 910 mm<br/>: 800 x 400 mm<br/>: 350 x 40 x 127 mm<br/>: 500 kg<br/>: 5,5 kw<br/>: 2.620 mm<br/>: 2.400 mm<br/>: 1.930 mm<br/>: 3.800 kg<br/>2-axes digital read-out<br/>grinding wheel with flange <br/>wheel balance arbour <br/>electro-magnetic chuck <br/>hydraulic longitudinal feed <br/>automatic cross feed <br/>automatic vertical feed <br/>automatic demagnetiser <br/>man. parallel wheel dressing device <br/>coolant device <br/>separate hydraulic unit <br/>aut. central lubrication <br/> dressing diamond<br/>operator tools <br/>machine and equipment according to the ce-regulations <br/>user manual in german and english<br/><br/>distance spindle-table: 580 mm<br/>table: 810 x 400 mm<br/>longitudinal travel: 910 mm<br/>magnetic clamping plate: 800 x 400 mm<br/>spindle speed: 1.450 r.p.m.<br/>grinding wheel dimensions: 350 x 40 x 127 mm<br/>max. work piece weight: 500 kg<br/>spindle motor power: 5,5 kw<br/>length: 2.620 mm<br/>width: 2.400 mm<br/>height: 1.930 mm<br/>weight: 3.800 kg<br/><br/><br/><br/> : 580 MM
: 810 X 400 MM
: 910 MM
: 800 X 400 MM
: 350 X 40 X 127 MM
: 500 KG
: 5,5 KW
: 2.620 MM
: 2.400 MM
: 1.930 MM
: 3.800 KG
2-AXES DIGITAL READ-OUT
GRINDING WHEEL WITH FLANGE
WHEEL BALANCE ARBOUR
ELECTRO-MAGNETIC CHUCK
HYDRAULIC LONGITUDINAL FEED
AUTOMATIC CROSS FEED
AUTOMATIC VERTICAL FEED
AUTOMATIC DEMAGNETISER
MAN. PARALLEL WHEEL DRESSING DEVICE
COOLANT DEVICE
SEPARATE HYDRAULIC UNIT
AUT. CENTRAL LUBRICATION
DRESSING DIAMOND
OPERATOR TOOLS
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

DISTANCE SPINDLE-TABLE: 580 MM
TABLE: 810 X 400 MM
LONGITUDINAL TRAVEL: 910 MM
MAGNETIC CLAMPING PLATE: 800 X 400 MM
SPINDLE SPEED: 1.450 R.P.M.
GRINDING WHEEL DIMENSIONS: 350 X 40 X 127 MM
MAX. WORK PIECE WEIGHT: 500 KG
SPINDLE MOTOR POWER: 5,5 KW
LENGTH: 2.620 MM
WIDTH: 2.400 MM
HEIGHT: 1.930 MM
WEIGHT: 3.800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-hub motor demag zbr 132 d 12/2 w 140 (reconditioned).
v: 400
hz: 50 kw: 1.4/8.9
ip: 55 HUB MOTOR DEMAG ZBR 132 D 12/2 W 140 (RECONDITIONED). V: 400 HZ: 50 KW: 1.4/8.9 IP: 55
Vendedor: Industriemaschinenhandel
Año de construcción: usado
Precio: 18.200 €
Ubicación: Land-: 495 mm<br/>: 635 x 305 mm<br/>: 765 mm<br/>: 600 x 300 mm<br/>: 350 x 40 x 127 mm<br/>: 270 kg<br/>: 5,5 kw<br/>: 2.100 mm<br/>: 2.000 mm<br/>: 1.950 mm<br/>: 1.900 kg<br/>2-axes digital read-out<br/>aut. vertical feed by siemens td400c control (freely selectable feed order, rough grinding/fine grinding)<br/>grinding wheel with flange <br/>wheel balance arbour <br/>electro-magnetic chuck <br/>hydraulic longitudinal feed <br/>automatic cross feed  <br/>automatic demagnetiser <br/>man. parallel wheel dressing device <br/>coolant device <br/>separate hydraulic unit <br/>aut. central lubrication <br/> dressing diamond<br/>operator tools <br/>machine and equipment according to the ce-regulations <br/>user manual in german and english<br/><br/>distance spindle-table: 495 mm<br/>table: 635 x 305 mm<br/>longitudinal travel: 765 mm<br/>magnetic clamping plate: 600 x 300 mm<br/>spindle speed: 1.450 r.p.m.<br/>grinding wheel dimensions: 350 x 40 x 127 mm<br/>max. work piece weight: 270 kg<br/>spindle motor power: 5,5 kw<br/>length: 2.100 mm<br/>width: 2.000 mm<br/>height: 1.950 mm<br/>weight: 1.900 kg<br/><br/><br/><br/> : 495 MM
: 635 X 305 MM
: 765 MM
: 600 X 300 MM
: 350 X 40 X 127 MM
: 270 KG
: 5,5 KW
: 2.100 MM
: 2.000 MM
: 1.950 MM
: 1.900 KG
2-AXES DIGITAL READ-OUT
AUT. VERTICAL FEED BY SIEMENS TD400C CONTROL (FREELY SELECTABLE FEED ORDER, ROUGH GRINDING/FINE GRINDING)
GRINDING WHEEL WITH FLANGE
WHEEL BALANCE ARBOUR
ELECTRO-MAGNETIC CHUCK
HYDRAULIC LONGITUDINAL FEED
AUTOMATIC CROSS FEED 
AUTOMATIC DEMAGNETISER
MAN. PARALLEL WHEEL DRESSING DEVICE
COOLANT DEVICE
SEPARATE HYDRAULIC UNIT
AUT. CENTRAL LUBRICATION
DRESSING DIAMOND
OPERATOR TOOLS
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

DISTANCE SPINDLE-TABLE: 495 MM
TABLE: 635 X 305 MM
LONGITUDINAL TRAVEL: 765 MM
MAGNETIC CLAMPING PLATE: 600 X 300 MM
SPINDLE SPEED: 1.450 R.P.M.
GRINDING WHEEL DIMENSIONS: 350 X 40 X 127 MM
MAX. WORK PIECE WEIGHT: 270 KG
SPINDLE MOTOR POWER: 5,5 KW
LENGTH: 2.100 MM
WIDTH: 2.000 MM
HEIGHT: 1.950 MM
WEIGHT: 1.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land--manufacturer: meissner cranes
-wingspan: 18.5 m
-height under hook: up to 12 m
-2 x demagogic hoist
-two levels of speed

with crane books, wireless remote control.
including dismantling and loading.
 -MANUFACTURER: MEISSNER CRANES -WINGSPAN: 18.5 M -HEIGHT UNDER HOOK: UP TO 12 M -2 X DEMAGOGIC HOIST -TWO LEVELS OF SPEED WITH CRANE BOOKS, WIRELESS REMOTE CONTROL. INCLUDING DISMANTLING AND LOADING.
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: demag, year: 1999, hight of column mm: 8000, traglast kg: 500, year :1999 MANUFACTURER: DEMAG, YEAR: 1999, HIGHT OF COLUMN MM: 8000, TRAGLAST KG: 500, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-demag ergotech compact 1000-310 with robots by the mark wittmann
built in 1996

injection unit:
screw diameter: 35 mm
shot weight: 149 g
injection pressure: 2020 bar
dosing volume: 168.3 ccm

clamping unit:
clamping force: 100 t
tie bar distance: 400 x 400 mm
size of the clamping plates: 580 x 590 mm
ejector: hydraulic
clamping unit: hydraulic

control:
nc 4
additional equipment:
euromap
robot interface
core move x 1
control air valve
hot channel control

dimensions:
weight: 4200 kg
length/width/height: 4.2 x 1.4 x 1.9 m
drive:
pump/motor: 18.5 kw
heating capacity: 9.4 kw
cylinder heating: 27.9 kw

price: on request
DEMAG ERGOTECH COMPACT 1000-310 WITH ROBOTS BY THE MARK WITTMANN BUILT IN 1996 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 149 G INJECTION PRESSURE: 2020 BAR DOSING VOLUME: 168.3 CCM CLAMPING UNIT: CLAMPING FORCE: 100 T TIE BAR DISTANCE: 400 X 400 MM SIZE OF THE CLAMPING PLATES: 580 X 590 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: NC 4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CORE MOVE X 1 CONTROL AIR VALVE HOT CHANNEL CONTROL DIMENSIONS: WEIGHT: 4200 KG LENGTH/WIDTH/HEIGHT: 4.2 X 1.4 X 1.9 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING CAPACITY: 9.4 KW CYLINDER HEATING: 27.9 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: used machinery auction RESALE 9.900 €
Ubicación: Land-weight approx.: 3800 kg<br/>dimensions (l x w x h) approx.: 4700 x 1500 x 2600 mm<br/>description: international size indication 50 - 150, closing unit 500, closing force 500 kn, locking force 550 kn, opening path max. 260 mm, tool installation height min. 150 mm, max. 350 mm, max. distance of the tool clamping plates 610 mm, tool clamping plates 490 x 500 mm, clear distance between columns 330 x 330 mm, tool weight max. 580 kg, tool weight on the movable clamping plate 380 kg, ejector path 80 mm, ejection force 25 kn, ejection retraction force 25 kn, injection unit dosing path max. 105 mm, nozzle path max. 200 mm, nozzle immersion depth (svo) 20 mm, nozzle press force 30 kn, hopper contents 35 l, further accessories moeller data collection without control and software, hopper loader koch tma 8, number 16134, 24 v, without control and software, robot/manipulator shini ss-550-em 12-ce, power 30 w, weight 62 kg, dimensions 570 x 340 x 1100 mm, serial number 2 ss 13080025, temperature controller hb-0 150-6 a, output 6.55 kw, serial number 8840855, operating hours cpu 40781.6, ergo control 40775.9.<br> please also have a look to pdf document and video of this item! WEIGHT APPROX.: 3800 KG
DIMENSIONS (L X W X H) APPROX.: 4700 X 1500 X 2600 MM
DESCRIPTION: INTERNATIONAL SIZE INDICATION 50 - 150, CLOSING UNIT 500, CLOSING FORCE 500 KN, LOCKING FORCE 550 KN, OPENING PATH MAX. 260 MM, TOOL INSTALLATION HEIGHT MIN. 150 MM, MAX. 350 MM, MAX. DISTANCE OF THE TOOL CLAMPING PLATES 610 MM, TOOL CLAMPING PLATES 490 X 500 MM, CLEAR DISTANCE BETWEEN COLUMNS 330 X 330 MM, TOOL WEIGHT MAX. 580 KG, TOOL WEIGHT ON THE MOVABLE CLAMPING PLATE 380 KG, EJECTOR PATH 80 MM, EJECTION FORCE 25 KN, EJECTION RETRACTION FORCE 25 KN, INJECTION UNIT DOSING PATH MAX. 105 MM, NOZZLE PATH MAX. 200 MM, NOZZLE IMMERSION DEPTH (SVO) 20 MM, NOZZLE PRESS FORCE 30 KN, HOPPER CONTENTS 35 L, FURTHER ACCESSORIES MOELLER DATA COLLECTION WITHOUT CONTROL AND SOFTWARE, HOPPER LOADER KOCH TMA 8, NUMBER 16134, 24 V, WITHOUT CONTROL AND SOFTWARE, ROBOT/MANIPULATOR SHINI SS-550-EM 12-CE, POWER 30 W, WEIGHT 62 KG, DIMENSIONS 570 X 340 X 1100 MM, SERIAL NUMBER 2 SS 13080025, TEMPERATURE CONTROLLER HB-0 150-6 A, OUTPUT 6.55 KW, SERIAL NUMBER 8840855, OPERATING HOURS CPU 40781.6, ERGO CONTROL 40775.9.
PLEASE ALSO HAVE A LOOK TO PDF DOCUMENT AND VIDEO OF THIS ITEM!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-demag ergotech system 3500-840
year of construction: 2000

injection unit:
screw diameter: 45 mm
shot weight: 320 g
injection pressure: 2402 bar
dispensing volume: 358 cc

clamping unit:
clamping force: 350 t
tie bar distance: 720 x 650 mm
size of the clamping plates: 1040 x 950 mm
ejector: hydraulic
clamping unit: knee lever

control:
nc 4

additional equipment:
euromap
robot interface
hydraulic core pulling x 1
injection unit made of bimetal
parallel movements
central lubrication system
built-in printer to print out the machine history
auto tool installation height
it is possible to change the injection unit for a larger injection unit with screw diameter 50 mm, 60 mm,

dimensions:
: weight 13800
length/width/height: 6.5 x 2.0 x 2.3 m

drive:
pump/motor: 45 kw
heating power: 15 kw
cylinder heating: 60 kw

price: on request DEMAG ERGOTECH SYSTEM 3500-840 YEAR OF CONSTRUCTION: 2000 INJECTION UNIT: SCREW DIAMETER: 45 MM SHOT WEIGHT: 320 G INJECTION PRESSURE: 2402 BAR DISPENSING VOLUME: 358 CC CLAMPING UNIT: CLAMPING FORCE: 350 T TIE BAR DISTANCE: 720 X 650 MM SIZE OF THE CLAMPING PLATES: 1040 X 950 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: NC 4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE HYDRAULIC CORE PULLING X 1 INJECTION UNIT MADE OF BIMETAL PARALLEL MOVEMENTS CENTRAL LUBRICATION SYSTEM BUILT-IN PRINTER TO PRINT OUT THE MACHINE HISTORY AUTO TOOL INSTALLATION HEIGHT IT IS POSSIBLE TO CHANGE THE INJECTION UNIT FOR A LARGER INJECTION UNIT WITH SCREW DIAMETER 50 MM, 60 MM, DIMENSIONS: : WEIGHT 13800 LENGTH/WIDTH/HEIGHT: 6.5 X 2.0 X 2.3 M DRIVE: PUMP/MOTOR: 45 KW HEATING POWER: 15 KW CYLINDER HEATING: 60 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-vemag maschinenbau gmbh vacuum filling machine, model: robby, number: 0439, 220-240 v / 400-460 v / 575 v, 3 ph, 50/60 hz, linking, portioning and filling, including linking attachment, total dimensions: 1350 mm x 880 mm x 1860 mm. VEMAG MASCHINENBAU GMBH VACUUM FILLING MACHINE, MODEL: ROBBY, NUMBER: 0439, 220-240 V / 400-460 V / 575 V, 3 PH, 50/60 HZ, LINKING, PORTIONING AND FILLING, INCLUDING LINKING ATTACHMENT, TOTAL DIMENSIONS: 1350 MM X 880 MM X 1860 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-demag ergotech system 4200-840
year of construction: 2001

injection unit:
screw diameter: 60 mm
shot weight: 570 g
injection pressure: 1351 bar
dispensing volume: 636 cc

clamping unit:
clamping force: 420 t
tie bar distance: 800 x 710 mm
clamping plate sizes: 1200 x 1100 mm
ejector: hydraulic
clamping unit: knee lever

control: nc 4

additional equipment:
hybrid machine
euromap
robot interface
control air valve
hydraulic core pulling x 2
auto tool installation height
central lubrication system
built-in printer to print out the machine history
it is possible to change the injection unit for a larger injection unit with screw diameter 50 mm, 60 mm, 70 mm

dimensions:
weight: 17400 kg
length/width/height: 7.9 x 2.2 x 2.5 m

drive:
pump/motor: 45 kw
heating power: 23 kw
cylinder heating: 68 kw

price: on request DEMAG ERGOTECH SYSTEM 4200-840 YEAR OF CONSTRUCTION: 2001 INJECTION UNIT: SCREW DIAMETER: 60 MM SHOT WEIGHT: 570 G INJECTION PRESSURE: 1351 BAR DISPENSING VOLUME: 636 CC CLAMPING UNIT: CLAMPING FORCE: 420 T TIE BAR DISTANCE: 800 X 710 MM CLAMPING PLATE SIZES: 1200 X 1100 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: NC 4 ADDITIONAL EQUIPMENT: HYBRID MACHINE EUROMAP ROBOT INTERFACE CONTROL AIR VALVE HYDRAULIC CORE PULLING X 2 AUTO TOOL INSTALLATION HEIGHT CENTRAL LUBRICATION SYSTEM BUILT-IN PRINTER TO PRINT OUT THE MACHINE HISTORY IT IS POSSIBLE TO CHANGE THE INJECTION UNIT FOR A LARGER INJECTION UNIT WITH SCREW DIAMETER 50 MM, 60 MM, 70 MM DIMENSIONS: WEIGHT: 17400 KG LENGTH/WIDTH/HEIGHT: 7.9 X 2.2 X 2.5 M DRIVE: PUMP/MOTOR: 45 KW HEATING POWER: 23 KW CYLINDER HEATING: 68 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-grinding diameter: 600 mm<br/>grinding length: 1000 mm<br/>centre height: 320 mm<br/>control: siemens 840 d <br/>workpiece-spindlehead motor: 45 kw<br/>max. workpiece weight between centers: 700 kg<br/>max. workpiece weight at 540 mm: 500 kg<br/>drive capacity - grinding wheel: 20 kw<br/>spindle speeds (infinitely variable): 4000 u/min<br/>solution in x-, y- und z-axis: 0,0001 mm<br/>rapid speed: 15 m/min<br/>sanding disc diameter: max. 762 mm<br/>weight of the machine ca.: 10,5 t<br/>dimensions of the machine ca.: 5 x 4x 2,5 m<br/>** inspectable under power at location in east-germany **<br/><br/><br/><br/><br/> GRINDING DIAMETER: 600 MM
GRINDING LENGTH: 1000 MM
CENTRE HEIGHT: 320 MM
CONTROL: SIEMENS 840 D
WORKPIECE-SPINDLEHEAD MOTOR: 45 KW
MAX. WORKPIECE WEIGHT BETWEEN CENTERS: 700 KG
MAX. WORKPIECE WEIGHT AT 540 MM: 500 KG
DRIVE CAPACITY - GRINDING WHEEL: 20 KW
SPINDLE SPEEDS (INFINITELY VARIABLE): 4000 U/MIN
SOLUTION IN X-, Y- UND Z-AXIS: 0,0001 MM
RAPID SPEED: 15 M/MIN
SANDING DISC DIAMETER: MAX. 762 MM
WEIGHT OF THE MACHINE CA.: 10,5 T
DIMENSIONS OF THE MACHINE CA.: 5 X 4X 2,5 M
** INSPECTABLE UNDER POWER AT LOCATION IN EAST-GERMANY **




Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Ubicación: Land-control system:	
siemens sinumerik 840 d	
number of axes: 3	
capacities:	
turning diameter: 220 mm	
machining height: 110 mm	
travel distances:	
x: 570 mm	
z: 200 mm	
quick feeds (x/z): 50 / 30 m/min	
turret:	
number of positions: 12	
tool holders: vdi40	
rotary tools speed: 6000 rpm	
rotary tools power: 8.5 kw	
spindle:	
spindle nose: din55026 - size 6	
engine power: 27 / 18 kw	
sorque: 303 / 202 nm	
speeds: 0 to 4500 rpm	
c axis indexing precision: 0.001	
part magazine:	
capacity for parts diameter 30 to 85 mm: 30 pos	
capacity for parts diameter 30 to 160 mm: 18 pos	
capacity for parts diameter 80 to 220 mm: 14 pos	
max part height: 110 mm	
electrical supply:	
tension: 400 v	
installed power: 42 kw	
machine dimensions:	
2700 x 2050 x 2400 mm	
machine weight: 6500 kg	
accessories:	
tool holder  CONTROL SYSTEM: SIEMENS SINUMERIK 840 D NUMBER OF AXES: 3 CAPACITIES: TURNING DIAMETER: 220 MM MACHINING HEIGHT: 110 MM TRAVEL DISTANCES: X: 570 MM Z: 200 MM QUICK FEEDS (X/Z): 50 / 30 M/MIN TURRET: NUMBER OF POSITIONS: 12 TOOL HOLDERS: VDI40 ROTARY TOOLS SPEED: 6000 RPM ROTARY TOOLS POWER: 8.5 KW SPINDLE: SPINDLE NOSE: DIN55026 - SIZE 6 ENGINE POWER: 27 / 18 KW SORQUE: 303 / 202 NM SPEEDS: 0 TO 4500 RPM C AXIS INDEXING PRECISION: 0.001 PART MAGAZINE: CAPACITY FOR PARTS DIAMETER 30 TO 85 MM: 30 POS CAPACITY FOR PARTS DIAMETER 30 TO 160 MM: 18 POS CAPACITY FOR PARTS DIAMETER 80 TO 220 MM: 14 POS MAX PART HEIGHT: 110 MM ELECTRICAL SUPPLY: TENSION: 400 V INSTALLED POWER: 42 KW MACHINE DIMENSIONS: 2700 X 2050 X 2400 MM MACHINE WEIGHT: 6500 KG ACCESSORIES: TOOL HOLDER
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-vemag	
model: robot 4000 dc	
vacuum stuffer		
stainless machine, 250kg agitated hopper, stainless tote bin hoist attachment, up to 12,000kg per hour, with various spares, change parts.

 VEMAG MODEL: ROBOT 4000 DC VACUUM STUFFER STAINLESS MACHINE, 250KG AGITATED HOPPER, STAINLESS TOTE BIN HOIST ATTACHMENT, UP TO 12,000KG PER HOUR, WITH VARIOUS SPARES, CHANGE PARTS.
Vendedor: UFM
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 2300 x 400 x 2700 mm<br/>description: jib length approx. 2000 mm, with electric chain hoist demag pk 1 n-f, manufacturer number 5848665, max. load 125 kg WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 400 X 2700 MM
DESCRIPTION: JIB LENGTH APPROX. 2000 MM, WITH ELECTRIC CHAIN HOIST DEMAG PK 1 N-F, MANUFACTURER NUMBER 5848665, MAX. LOAD 125 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag ergotech 35-80
year of construction: 1966
schneckendruchmesser: 18 mm
bebkq73i7y
clamping force: 350 kn
maximum injection pressure: 2,400 bar
september 2016: rotex star pump drive changed
march 2016: renewed headpiece plasticizing cylinder
 INJECTION MOLDING MACHINE DEMAG ERGOTECH 35-80 YEAR OF CONSTRUCTION: 1966 SCHNECKENDRUCHMESSER: 18 MM BEBKQ73I7Y CLAMPING FORCE: 350 KN MAXIMUM INJECTION PRESSURE: 2,400 BAR SEPTEMBER 2016: ROTEX STAR PUMP DRIVE CHANGED MARCH 2016: RENEWED HEADPIECE PLASTICIZING CYLINDER
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 3500 x 500 x 3100 mm<br/>description: max. load 250 kg, with electrical chain hoist demag, capacity 250 kg, jib length approx. 3000 mm WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 500 X 3100 MM
DESCRIPTION: MAX. LOAD 250 KG, WITH ELECTRICAL CHAIN HOIST DEMAG, CAPACITY 250 KG, JIB LENGTH APPROX. 3000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag ergotech 35-80
year of construction: 1996
screw diameter: 18 mm
clamping force: 350 kn
maximum injection pressure: 2. 400 bar
january 2017: completely new cylinder with screw, non-return valve and lace
october 2016: rotex sprocket changed from the pump drive
february 2014: replaced electric motor pump drive INJECTION MOLDING MACHINE DEMAG ERGOTECH 35-80 YEAR OF CONSTRUCTION: 1996 SCREW DIAMETER: 18 MM CLAMPING FORCE: 350 KN MAXIMUM INJECTION PRESSURE: 2. 400 BAR JANUARY 2017: COMPLETELY NEW CYLINDER WITH SCREW, NON-RETURN VALVE AND LACE OCTOBER 2016: ROTEX SPROCKET CHANGED FROM THE PUMP DRIVE FEBRUARY 2014: REPLACED ELECTRIC MOTOR PUMP DRIVE
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 4000 x 440 x 3340 mm<br/>description: device number 025923, load 250 kg, including demag chain hoist, load 250 kg, jib length approx. 3000 mm WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 440 X 3340 MM
DESCRIPTION: DEVICE NUMBER 025923, LOAD 250 KG, INCLUDING DEMAG CHAIN HOIST, LOAD 250 KG, JIB LENGTH APPROX. 3000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine demag ergotech system 50/370-200
year of construction: 2004
screw diameter: 30 mm
clamping force: 500 kn
maximum injection pressure: 1,995 bar
august 2017: full gasket change ejector cylinder
september 2016: active cylinder/quantities translator new sealed
september 2015: pumpe2 replaced by regenerated INJECTION MOLDING MACHINE DEMAG ERGOTECH SYSTEM 50/370-200 YEAR OF CONSTRUCTION: 2004 SCREW DIAMETER: 30 MM CLAMPING FORCE: 500 KN MAXIMUM INJECTION PRESSURE: 1,995 BAR AUGUST 2017: FULL GASKET CHANGE EJECTOR CYLINDER SEPTEMBER 2016: ACTIVE CYLINDER/QUANTITIES TRANSLATOR NEW SEALED SEPTEMBER 2015: PUMPE2 REPLACED BY REGENERATED
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-grinding length:600 mm<br/>grinding width:550 mm<br/>workpiece height:600 mm<br/>surface area:1000x450 mm<br/>max. table load:250 kg<br/>spindle drive:15 ps<br/>hydraulic pump engine:1,9/3,9 ps<br/>cross feed motor:0,75 ps<br/>:1400x1900 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:18 kw<br/>weight of the machine ca.:4100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:600 MM
GRINDING WIDTH:550 MM
WORKPIECE HEIGHT:600 MM
SURFACE AREA:1000X450 MM
MAX. TABLE LOAD:250 KG
SPINDLE DRIVE:15 PS
HYDRAULIC PUMP ENGINE:1,9/3,9 PS
CROSS FEED MOTOR:0,75 PS
:1400X1900 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:18 KW
WEIGHT OF THE MACHINE CA.:4100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine ergotech 350-870
year of construction: 2002
screw diameter: 25 mm
clamping force: 500kn
maximum injection pressure: 2.743 bar
accessories: belt and roller
june 2018: newly built driving beams for injection unit
si0psdzl
may 2017: hydraulic motor (dose) changed)
april 2017: completely new cylinder with screw, non-return valve and lace
march 2015: renewed pumpe1, sequence valve, control valve and pressure sensor (current operating hours approximately 17, 000 h)
 INJECTION MOLDING MACHINE ERGOTECH 350-870 YEAR OF CONSTRUCTION: 2002 SCREW DIAMETER: 25 MM CLAMPING FORCE: 500KN MAXIMUM INJECTION PRESSURE: 2.743 BAR ACCESSORIES: BELT AND ROLLER JUNE 2018: NEWLY BUILT DRIVING BEAMS FOR INJECTION UNIT SI0PSDZL MAY 2017: HYDRAULIC MOTOR (DOSE) CHANGED) APRIL 2017: COMPLETELY NEW CYLINDER WITH SCREW, NON-RETURN VALVE AND LACE MARCH 2015: RENEWED PUMPE1, SEQUENCE VALVE, CONTROL VALVE AND PRESSURE SENSOR (CURRENT OPERATING HOURS APPROXIMATELY 17, 000 H)
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-grinding length:500 mm<br/>grinding width:250 mm<br/>workpiece height:375 mm<br/>table clamping surface lxw:760x200 mm<br/>:500x250 mm<br/>distance between  table/spindle:525 mm<br/>:2-28 m/min<br/>:1,2 m/min<br/>:1-30 mm/hub<br/>:0,02 mm<br/>vertical feed autom.:0,002-0,06 mm<br/>:0,15 m/min<br/>:0,02 mm<br/>:0,001 mm<br/>:1400/2800 1/min<br/>diameter / bore of grinding wheel:300/76,2 mm<br/>grinding wheel wide min./max.:25/30 mm<br/>:3,7/4,5 kw<br/>hydraulic pump:1,5 kw<br/>:0,1 kw<br/>vertical feed motor:1,7 kw<br/>wet grinding attachment:0,15 kw<br/>:1600 kg<br/>:1,9x1,5x1,95 m<br/><br/>used surface grinding machine, make elb, hahn & kolb, type orion 525 nd, built in 1981, machine no .: 17650 (49564)  machine with automatic infeed in all 3 axes.  machine cleaned thoroughly and by qualified technician to complete. functioning checked.  machine in perfect, produktionsbereitem condition.  accessories: - electric - magnetic - chipboard with fine straight pole division, size 500x250mm - demagnetizing - schleifscheibenabrichtgerät, mounted on the grinding wheel, manually operated - wet grinding - 1 piece grinding wheel - 1 set of machine setting up / alignment - 1 piece halogen machine luminaire - technical documentation in german  more details: description design nd digital display for y-axis  payment: 100% before loading the machine warranty: no GRINDING LENGTH:500 MM
GRINDING WIDTH:250 MM
WORKPIECE HEIGHT:375 MM
TABLE CLAMPING SURFACE LXW:760X200 MM
:500X250 MM
DISTANCE BETWEEN TABLE/SPINDLE:525 MM
:2-28 M/MIN
:1,2 M/MIN
:1-30 MM/HUB
:0,02 MM
VERTICAL FEED AUTOM.:0,002-0,06 MM
:0,15 M/MIN
:0,02 MM
:0,001 MM
:1400/2800 1/MIN
DIAMETER / BORE OF GRINDING WHEEL:300/76,2 MM
GRINDING WHEEL WIDE MIN./MAX.:25/30 MM
:3,7/4,5 KW
HYDRAULIC PUMP:1,5 KW
:0,1 KW
VERTICAL FEED MOTOR:1,7 KW
WET GRINDING ATTACHMENT:0,15 KW
:1600 KG
:1,9X1,5X1,95 M

USED SURFACE GRINDING MACHINE, MAKE ELB, HAHN & KOLB, TYPE ORION 525 ND, BUILT IN 1981, MACHINE NO .: 17650 (49564) MACHINE WITH AUTOMATIC INFEED IN ALL 3 AXES. MACHINE CLEANED THOROUGHLY AND BY QUALIFIED TECHNICIAN TO COMPLETE. FUNCTIONING CHECKED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM CONDITION. ACCESSORIES: - ELECTRIC - MAGNETIC - CHIPBOARD WITH FINE STRAIGHT POLE DIVISION, SIZE 500X250MM - DEMAGNETIZING - SCHLEIFSCHEIBENABRICHTGERäT, MOUNTED ON THE GRINDING WHEEL, MANUALLY OPERATED - WET GRINDING - 1 PIECE GRINDING WHEEL - 1 SET OF MACHINE SETTING UP / ALIGNMENT - 1 PIECE HALOGEN MACHINE LUMINAIRE - TECHNICAL DOCUMENTATION IN GERMAN MORE DETAILS: DESCRIPTION DESIGN ND DIGITAL DISPLAY FOR Y-AXIS PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-stuffer vemag robot 500, vacuum filling machine,.
with stainless steel conveyor curve
dimensions lxwxh approx. 95x70x140cm, weight approx. 411kg
the machine is in excellent condition and works flawlessly
 STUFFER VEMAG ROBOT 500, VACUUM FILLING MACHINE,. WITH STAINLESS STEEL CONVEYOR CURVE DIMENSIONS LXWXH APPROX. 95X70X140CM, WEIGHT APPROX. 411KG THE MACHINE IS IN EXCELLENT CONDITION AND WORKS FLAWLESSLY
Vendedor: Lebensmitteltechnik Mayer
Año de construcción: usado
Ubicación: Land-grinding length:700 mm<br/>grinding width:400 mm<br/>workpiece height:350 mm<br/>surface area:1100x300 mm<br/>spindle drive:6,8 ps<br/>hydraulic pump engine:2 ps<br/>cross feed motor:0,33 ps<br/>:1800x1200 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:11 kw<br/>weight of the machine ca.:3100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:700 MM
GRINDING WIDTH:400 MM
WORKPIECE HEIGHT:350 MM
SURFACE AREA:1100X300 MM
SPINDLE DRIVE:6,8 PS
HYDRAULIC PUMP ENGINE:2 PS
CROSS FEED MOTOR:0,33 PS
:1800X1200 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:3100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)