5541 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 24.000 €
Ubicación: Land-flat grinding machine, almost unused, condition almost like new

manufacturer bernardo
    type bsg 4080 ahd
    year 2014
    almost unused, absolutely mint condition, estimated about 50 operating hours

electric magnetic clamping plate 800 x 400 mm
    table size approx. 910 x 405 mm
    travel in x 900 mm
    travel in y 450 mm
    holder diameter 400 mm
    maximum workpiece height 370 mm
    maximum work-piece weight 500 kg

with micrometer-carbide pulley puller
    hydraulic feed in x (longitudinal) 7 up to 23 meters per minute
    feed in y 0.1 to 8 mm per stroke
    automatic vertical (z) - delivery: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 and 0.05 mm

accessories:
    flow filter grinding oil treatment
    hydraulic unit with oil cooling
    digital display bernardo sds6-2v

dimensions and weights:

basic machine
    w x d x h in cm: 270 x 230 x 190
    weight of 3,400 kg

fine filter: l x w 140 cm x 80 cm

hydraulic unit l x w 70 x 60 cm
  FLAT GRINDING MACHINE, ALMOST UNUSED, CONDITION ALMOST LIKE NEW MANUFACTURER BERNARDO TYPE BSG 4080 AHD YEAR 2014 ALMOST UNUSED, ABSOLUTELY MINT CONDITION, ESTIMATED ABOUT 50 OPERATING HOURS ELECTRIC MAGNETIC CLAMPING PLATE 800 X 400 MM TABLE SIZE APPROX. 910 X 405 MM TRAVEL IN X 900 MM TRAVEL IN Y 450 MM HOLDER DIAMETER 400 MM MAXIMUM WORKPIECE HEIGHT 370 MM MAXIMUM WORK-PIECE WEIGHT 500 KG WITH MICROMETER-CARBIDE PULLEY PULLER HYDRAULIC FEED IN X (LONGITUDINAL) 7 UP TO 23 METERS PER MINUTE FEED IN Y 0.1 TO 8 MM PER STROKE AUTOMATIC VERTICAL (Z) - DELIVERY: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 AND 0.05 MM ACCESSORIES: FLOW FILTER GRINDING OIL TREATMENT HYDRAULIC UNIT WITH OIL COOLING DIGITAL DISPLAY BERNARDO SDS6-2V DIMENSIONS AND WEIGHTS: BASIC MACHINE W X D X H IN CM: 270 X 230 X 190 WEIGHT OF 3,400 KG FINE FILTER: L X W 140 CM X 80 CM HYDRAULIC UNIT L X W 70 X 60 CM
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: 45.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-bj 01/1996
motor mde
480v
460kva
360kw
541a BJ 01/1996 MOTOR MDE 480V 460KVA 360KW 541A
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 66.600 EU€
Ubicación: Land-the machine worked from the news for about a year, it was later dismantled. since then stored in a heated hall, protected from dust. inability to install and test the machines in action. based on visual inspection found the completeness of the device. THE MACHINE WORKED FROM THE NEWS FOR ABOUT A YEAR, IT WAS LATER DISMANTLED. SINCE THEN STORED IN A HEATED HALL, PROTECTED FROM DUST. INABILITY TO INSTALL AND TEST THE MACHINES IN ACTION. BASED ON VISUAL INSPECTION FOUND THE COMPLETENESS OF THE DEVICE.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-manufacturer:
leroy somer generator sets
model:
lsa 46.1 m5 c6/4
condition: used
bj:
1995

cooling:
water cooled
tension:
400v 120kw
 MANUFACTURER: LEROY SOMER GENERATOR SETS MODEL: LSA 46.1 M5 C6/4 CONDITION: USED BJ: 1995 COOLING: WATER COOLED TENSION: 400V 120KW
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 35.200 EU€
Ubicación: Land-the machine is designed for grinding simple wooden elements placed in line. THE MACHINE IS DESIGNED FOR GRINDING SIMPLE WOODEN ELEMENTS PLACED IN LINE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-we have always several used electric motors in stock. we provide detailed information on request. WE HAVE ALWAYS SEVERAL USED ELECTRIC MOTORS IN STOCK. WE PROVIDE DETAILED INFORMATION ON REQUEST.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 18.700 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-tip height: 300 / 330 mm
top width: 3000 mm
speed range: 12-600 rpm
spindle bore: 83 mm
total power: 7.5 kw / 380 v
machine weight: about 5000 kg

equipment / accessories

4 jaw chuck
1 festst. lynette
mitlfd. lathe
4 way toolpost
chip protection tray
coolant system

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in our factory under power.
 TIP HEIGHT: 300 / 330 MM TOP WIDTH: 3000 MM SPEED RANGE: 12-600 RPM SPINDLE BORE: 83 MM TOTAL POWER: 7.5 KW / 380 V MACHINE WEIGHT: ABOUT 5000 KG EQUIPMENT / ACCESSORIES 4 JAW CHUCK 1 FESTST. LYNETTE MITLFD. LATHE 4 WAY TOOLPOST CHIP PROTECTION TRAY COOLANT SYSTEM ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 4.620 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-

complete krones pet water filling line

line in production

brand name : krones
year : 2007-2006 ,  
capacity is  36,000bhp. 
krones  2007key assetkrones blowing machine air conditionerhandheld thermal imager 
krones blowing machine
air compressorblowing machine coveyerkrones 550ml 
moulding krones , 600ml 
moulding krones 
coveyer  krones 

filling machine krones 
labeller film wrapping machinewater treatment line.
air compressor weigh checking jet ink printer cip system coveyer dryer beltliquid nitrogen machine  
krones water level check packing machine  
krones filterlable checker  krones control cabinet 
krones full automatic sprinkling device laser marker led counterkrones scale  krones vernier caliper  
for the krones water line, 36,000bph, 
built in 2007, still running. any questions, please let me know. 
ask for picttures.

rgds
     COMPLETE KRONES PET WATER FILLING LINE LINE IN PRODUCTION BRAND NAME : KRONES YEAR : 2007-2006 , CAPACITY IS 36,000BHP. KRONES 2007KEY ASSETKRONES BLOWING MACHINE AIR CONDITIONERHANDHELD THERMAL IMAGER KRONES BLOWING MACHINE AIR COMPRESSORBLOWING MACHINE COVEYERKRONES 550ML MOULDING KRONES , 600ML MOULDING KRONES COVEYER KRONES FILLING MACHINE KRONES LABELLER FILM WRAPPING MACHINEWATER TREATMENT LINE. AIR COMPRESSOR WEIGH CHECKING JET INK PRINTER CIP SYSTEM COVEYER DRYER BELTLIQUID NITROGEN MACHINE KRONES WATER LEVEL CHECK PACKING MACHINE KRONES FILTERLABLE CHECKER KRONES CONTROL CABINET KRONES FULL AUTOMATIC SPRINKLING DEVICE LASER MARKER LED COUNTERKRONES SCALE KRONES VERNIER CALIPER FOR THE KRONES WATER LINE, 36,000BPH, BUILT IN 2007, STILL RUNNING. ANY QUESTIONS, PLEASE LET ME KNOW. ASK FOR PICTTURES. RGDS
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 13320; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 450 ; GROSS WEIGHT [KG]: 13320; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 450
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-used ball mill coal pulverizing or limestone grinding

ball mill 200kw
extraction
filter
burner
documentation USED BALL MILL COAL PULVERIZING OR LIMESTONE GRINDING BALL MILL 200KW EXTRACTION FILTER BURNER DOCUMENTATION
Vendedor: HTS GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 18100; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 18100; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-very little used frame and drilling machine series of gannomat

specifically to the dowel hole drilling at two levels in one clamping
drill level pneumatically adjustable

motor 1,5 kw, 2800 rpm
start the engine with practical handle switch
two-jaw chuck rã¶hm 1 to 20 mm
maximum height approx. 100 mm
maximum stroke 150 mm
cross adjustment 320 mm continuously variable
2 pneumatic workpiece clamping system
grid rail for quick adjustment side to side, scanning 12 mm
stroke length adjustment with recesses
suction pipe
center stop
double bevel stop adjustable from 0 to 60 degrees
height adjustment for upper and lower level with mechanical digital display and pneumatic switching
two way adjustable work-piece supports role

a high-quality universal drilling machine for many applications
obviously extremely rarely used, see photos. comes from a small assembly operation.

ce mark

dimensions approx. 1000 x 900 x 1250 mm (lxwxh). weight approx. 300kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". VERY LITTLE USED FRAME AND DRILLING MACHINE SERIES OF GANNOMAT SPECIFICALLY TO THE DOWEL HOLE DRILLING AT TWO LEVELS IN ONE CLAMPING DRILL LEVEL PNEUMATICALLY ADJUSTABLE MOTOR 1,5 KW, 2800 RPM START THE ENGINE WITH PRACTICAL HANDLE SWITCH TWO-JAW CHUCK RöHM 1 TO 20 MM MAXIMUM HEIGHT APPROX. 100 MM MAXIMUM STROKE 150 MM CROSS ADJUSTMENT 320 MM CONTINUOUSLY VARIABLE 2 PNEUMATIC WORKPIECE CLAMPING SYSTEM GRID RAIL FOR QUICK ADJUSTMENT SIDE TO SIDE, SCANNING 12 MM STROKE LENGTH ADJUSTMENT WITH RECESSES SUCTION PIPE CENTER STOP DOUBLE BEVEL STOP ADJUSTABLE FROM 0 TO 60 DEGREES HEIGHT ADJUSTMENT FOR UPPER AND LOWER LEVEL WITH MECHANICAL DIGITAL DISPLAY AND PNEUMATIC SWITCHING TWO WAY ADJUSTABLE WORK-PIECE SUPPORTS ROLE A HIGH-QUALITY UNIVERSAL DRILLING MACHINE FOR MANY APPLICATIONS OBVIOUSLY EXTREMELY RARELY USED, SEE PHOTOS. COMES FROM A SMALL ASSEMBLY OPERATION. CE MARK DIMENSIONS APPROX. 1000 X 900 X 1250 MM (LXWXH). WEIGHT APPROX. 300KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 12.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx4dk12449; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX4DK12449; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-control ultimax 4
travel x / y / z 1060/610/610 mm
spindle speed 10000 1 / min
tool magazine for 40 tools sk40
internal coolant
4th axis
chip conveyor  CONTROL ULTIMAX 4 TRAVEL X / Y / Z 1060/610/610 MM SPINDLE SPEED 10000 1 / MIN TOOL MAGAZINE FOR 40 TOOLS SK40 INTERNAL COOLANT 4TH AXIS CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-glue specification unit for dowel holes and rueckwandnuten

a video of the current machine can be sent on request.

with an ergonomic lighter gun to the stating of glue in dowel holes etc.
closed glue system, this little cleaning effort
stainless steel tank for 5 l glue
stainless steel tank for 5 l of water (to clean)
rinsing process takes only about 1 minute!
selector water / glue for fast commissioning and cleaning
glue quantity easy selector switch adjustable interval trigger for constant adjustable quantity of glue or permanent operation
ideal complement to an automated drilling and dowel system.
electrical connection 230 volt
6 bar air connection
ce mark
operating instructions
original condition in the photos
has been used very little, looks almost like new.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". GLUE SPECIFICATION UNIT FOR DOWEL HOLES AND RUECKWANDNUTEN A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. WITH AN ERGONOMIC LIGHTER GUN TO THE STATING OF GLUE IN DOWEL HOLES ETC. CLOSED GLUE SYSTEM, THIS LITTLE CLEANING EFFORT STAINLESS STEEL TANK FOR 5 L GLUE STAINLESS STEEL TANK FOR 5 L OF WATER (TO CLEAN) RINSING PROCESS TAKES ONLY ABOUT 1 MINUTE! SELECTOR WATER / GLUE FOR FAST COMMISSIONING AND CLEANING GLUE QUANTITY EASY SELECTOR SWITCH ADJUSTABLE INTERVAL TRIGGER FOR CONSTANT ADJUSTABLE QUANTITY OF GLUE OR PERMANENT OPERATION IDEAL COMPLEMENT TO AN AUTOMATED DRILLING AND DOWEL SYSTEM. ELECTRICAL CONNECTION 230 VOLT 6 BAR AIR CONNECTION CE MARK OPERATING INSTRUCTIONS ORIGINAL CONDITION IN THE PHOTOS HAS BEEN USED VERY LITTLE, LOOKS ALMOST LIKE NEW. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-bystronic xpert 200x4100 (2012)

overview
brand: bystronic
model: xpert 200x4100
application type: bending
machine type: bending machines
availability: immediately
production year: 2012
location: italy
origin country: germany
production hours: 12567

general data
machine weight: 17600 kg

control unit
interface: microsoft windows xp

main drive
pressing force: 2000 kn
bending length: 4100 mm
main motor power: 18.5 kw
stroke: 415 mm

media
main electronic connection: 400 v
power consumption: 22 kw
air pressure: 8 bar

additional equipment
1: tools
2: fast bend+  BYSTRONIC XPERT 200X4100 (2012) OVERVIEW BRAND: BYSTRONIC MODEL: XPERT 200X4100 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2012 LOCATION: ITALY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 12567 GENERAL DATA MACHINE WEIGHT: 17600 KG CONTROL UNIT INTERFACE: MICROSOFT WINDOWS XP MAIN DRIVE PRESSING FORCE: 2000 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 18.5 KW STROKE: 415 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 22 KW AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS 2: FAST BEND+
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-beyeler pr6 (2000)

overview
brand: beyeler
model: pr6
application type: bending
machine type: bending machines
availability: immediately
production year: 2000
location: italy
origin country: germany

general data
machine weight: 23400 kg

control unit
brand: cybelec
model: dnc 1200

main drive
pressing force: 3200 kn
bending length: 4100 mm
main motor power: 22 kw
stroke: 365 mm

media
main electronic connection: 400 v
air pressure: 8 bar

additional equipment
1: tools BEYELER PR6 (2000) OVERVIEW BRAND: BEYELER MODEL: PR6 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2000 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA MACHINE WEIGHT: 23400 KG CONTROL UNIT BRAND: CYBELEC MODEL: DNC 1200 MAIN DRIVE PRESSING FORCE: 3200 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 22 KW STROKE: 365 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-in technically and visually good condition.

the primus-series is the smallest conventional precision lathe, builds the hamlet for decades.
this machine has decades long proven in the single parts and small series production, in craft & industry, education, training, tool and fixture construction. all feeds, longitudinal & transverse including the castle nut thread termination function correctly and perfectly, the same applies to heidenhain position display the entire controls of the machine including the bed plan - and upper carriage, tailstock and the digital.

the bed are over the entire working surface in very good condition (see pictures). all spindles of the machine have little game are smooth-running in all directions (+-) adjustable by hand. the machine, a quick change toolpost multifix is type a (incl. 3 x steel holder) as well as a rã¶hm three-jaw chuck ã? 125 mm mounted.

this machine is in good allgemeinzustand.an of this site we want to withhold but also, the machine base has received a new paint job guess by the former owner, all from quite some time ago. this lathe comes from a private estate.
this used lathe provides you with a cost-effective alternative to a new machine that is ready for use.

technical details:

workspace:

tip height: 120 mm
top width: 430 mm
umlaufdurschmesser the bed: 245mm
belt levels drive
spindle speeds 16; by 150-3200 u/min
tailstock:

quill stroke: 80mm
taper: mk2
accessories:

digital position indicator / heidenhain vrz 710
three-jaw chuck / rã¶hm ã? 125 mm with indoor & outdoor baking set
muli fix quick change toolpost size a incl. 3 removable steel holders
chuck ã? 0-16mm
revolving lathe
bed stops
turning tool setter
control key
connection, mass & weight:

connection: 1,3kw / 380 volt with cee plug
dimensions: l 1160mm x w 650mm x h 1230mm
weight approx. 360 kg.
a tour / presentation can be pleased by appointment.

gladly we also supply, additional transport costs are created here however, depending on the location, we therefore ask for prior consultation.
  IN TECHNICALLY AND VISUALLY GOOD CONDITION. THE PRIMUS-SERIES IS THE SMALLEST CONVENTIONAL PRECISION LATHE, BUILDS THE HAMLET FOR DECADES. THIS MACHINE HAS DECADES LONG PROVEN IN THE SINGLE PARTS AND SMALL SERIES PRODUCTION, IN CRAFT & INDUSTRY, EDUCATION, TRAINING, TOOL AND FIXTURE CONSTRUCTION. ALL FEEDS, LONGITUDINAL & TRANSVERSE INCLUDING THE CASTLE NUT THREAD TERMINATION FUNCTION CORRECTLY AND PERFECTLY, THE SAME APPLIES TO HEIDENHAIN POSITION DISPLAY THE ENTIRE CONTROLS OF THE MACHINE INCLUDING THE BED PLAN - AND UPPER CARRIAGE, TAILSTOCK AND THE DIGITAL. THE BED ARE OVER THE ENTIRE WORKING SURFACE IN VERY GOOD CONDITION (SEE PICTURES). ALL SPINDLES OF THE MACHINE HAVE LITTLE GAME ARE SMOOTH-RUNNING IN ALL DIRECTIONS (+-) ADJUSTABLE BY HAND. THE MACHINE, A QUICK CHANGE TOOLPOST MULTIFIX IS TYPE A (INCL. 3 X STEEL HOLDER) AS WELL AS A RöHM THREE-JAW CHUCK � 125 MM MOUNTED. THIS MACHINE IS IN GOOD ALLGEMEINZUSTAND.AN OF THIS SITE WE WANT TO WITHHOLD BUT ALSO, THE MACHINE BASE HAS RECEIVED A NEW PAINT JOB GUESS BY THE FORMER OWNER, ALL FROM QUITE SOME TIME AGO. THIS LATHE COMES FROM A PRIVATE ESTATE. THIS USED LATHE PROVIDES YOU WITH A COST-EFFECTIVE ALTERNATIVE TO A NEW MACHINE THAT IS READY FOR USE. TECHNICAL DETAILS: WORKSPACE: TIP HEIGHT: 120 MM TOP WIDTH: 430 MM UMLAUFDURSCHMESSER THE BED: 245MM BELT LEVELS DRIVE SPINDLE SPEEDS 16; BY 150-3200 U/MIN TAILSTOCK: QUILL STROKE: 80MM TAPER: MK2 ACCESSORIES: DIGITAL POSITION INDICATOR / HEIDENHAIN VRZ 710 THREE-JAW CHUCK / RöHM � 125 MM WITH INDOOR & OUTDOOR BAKING SET MULI FIX QUICK CHANGE TOOLPOST SIZE A INCL. 3 REMOVABLE STEEL HOLDERS CHUCK � 0-16MM REVOLVING LATHE BED STOPS TURNING TOOL SETTER CONTROL KEY CONNECTION, MASS & WEIGHT: CONNECTION: 1,3KW / 380 VOLT WITH CEE PLUG DIMENSIONS: L 1160MM X W 650MM X H 1230MM WEIGHT APPROX. 360 KG. A TOUR / PRESENTATION CAN BE PLEASED BY APPOINTMENT. GLADLY WE ALSO SUPPLY, ADDITIONAL TRANSPORT COSTS ARE CREATED HERE HOWEVER, DEPENDING ON THE LOCATION, WE THEREFORE ASK FOR PRIOR CONSULTATION.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 18100; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 18100; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-it is a used bongard baguette long roller type fac major for sale.
the machine is fully functional and runs quietly.
on request, a video can be sent to from the test run. IT IS A USED BONGARD BAGUETTE LONG ROLLER TYPE FAC MAJOR FOR SALE. THE MACHINE IS FULLY FUNCTIONAL AND RUNS QUIETLY. ON REQUEST, A VIDEO CAN BE SENT TO FROM THE TEST RUN.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-complete pringles chip production line. (900 kg hr)
mostly built 2006

s/s super sack unloading station. 
sweco 30 in stainless steel 2-deck vibratory separator.
 advanced food systems model abm1000 1,000 lb. s/s batch mixer with 150 hp drive,
 1200 rpm with approximately 20 hp scraper and allen bradley panel view plus 1000 color touch screen operator controller and s/s two door electrical enclosure.
 machintek s/s hydraulic two roll sheeter with 18 in diameter x 42 in wide jacketed rollers,
 heat exchanger, top mounted feed hopper, remote electrical enclosure with allen bradley panel view plus 1000 color touch screen operator controller,
 s/s eight step elevated operator platform.
 heat and control 2,200 lbs. per hour fryer, 46 in wide x 40 ft. long, including 44 in wide infeed conveyor, s/s with heat and control heat exchanger, (2) - 54 in diameter x 6 ft. high s/s jacketed oil tanks with dish bottom, 2 in center bottom outlet, (3) - s/s legs, pioneer 30 hp centrifugal pump,
 1 hp stainless steel centrifugal pump,
 heat and control oil separator,
 heat and control exhaust system,
 allen bradley remote panelview plus 1000 color touch screen operator controller.
 30 in x 48 in seasoning tumbler, s/s shell, plastic interior liners,
 season applicator, 
poly diaphragm pump and 6 ft. x 8 ft.
 s/s elevated platform with guard rails and stair access.
no packing included
 COMPLETE PRINGLES CHIP PRODUCTION LINE. (900 KG HR) MOSTLY BUILT 2006 S/S SUPER SACK UNLOADING STATION. SWECO 30 IN STAINLESS STEEL 2-DECK VIBRATORY SEPARATOR. ADVANCED FOOD SYSTEMS MODEL ABM1000 1,000 LB. S/S BATCH MIXER WITH 150 HP DRIVE, 1200 RPM WITH APPROXIMATELY 20 HP SCRAPER AND ALLEN BRADLEY PANEL VIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER AND S/S TWO DOOR ELECTRICAL ENCLOSURE. MACHINTEK S/S HYDRAULIC TWO ROLL SHEETER WITH 18 IN DIAMETER X 42 IN WIDE JACKETED ROLLERS, HEAT EXCHANGER, TOP MOUNTED FEED HOPPER, REMOTE ELECTRICAL ENCLOSURE WITH ALLEN BRADLEY PANEL VIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER, S/S EIGHT STEP ELEVATED OPERATOR PLATFORM. HEAT AND CONTROL 2,200 LBS. PER HOUR FRYER, 46 IN WIDE X 40 FT. LONG, INCLUDING 44 IN WIDE INFEED CONVEYOR, S/S WITH HEAT AND CONTROL HEAT EXCHANGER, (2) - 54 IN DIAMETER X 6 FT. HIGH S/S JACKETED OIL TANKS WITH DISH BOTTOM, 2 IN CENTER BOTTOM OUTLET, (3) - S/S LEGS, PIONEER 30 HP CENTRIFUGAL PUMP, 1 HP STAINLESS STEEL CENTRIFUGAL PUMP, HEAT AND CONTROL OIL SEPARATOR, HEAT AND CONTROL EXHAUST SYSTEM, ALLEN BRADLEY REMOTE PANELVIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER. 30 IN X 48 IN SEASONING TUMBLER, S/S SHELL, PLASTIC INTERIOR LINERS, SEASON APPLICATOR, POLY DIAPHRAGM PUMP AND 6 FT. X 8 FT. S/S ELEVATED PLATFORM WITH GUARD RAILS AND STAIR ACCESS. NO PACKING INCLUDED
Vendedor: Crezta Food Equipment
Año de construcción: usado
Precio: 18.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx7dk13277; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX7DK13277; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-engine details

stock number 1105-02499 machine type cnc lathe - inclined bed machine make gildemeister type ctx 320 v6 built in 2003 control type cnc storage france country of origin germany delivery immediately from stock of based on cargo from site work technical details

turning diameter 505 mm turning length 450 mm control siemens 840 d shop mill lining diameter 210 mm rod diameter 51 mm turning diameter over bed slide 375 x way 213 mm z-axis 450 mm spindle speeds 25-6000 rpm spindle motor 16 / 12 kw torque on the s pindel 153 / 115 nm rapid traverse - longitudinal/plan 60/12/45 m / min c-axis 0.001 / 360 Ⱐnumber of driven tools 12 mm 㸠30 mm power 9 / 6.7 kw speed range 4500 / 4000 kw/rpm total power requirement 29 machine weight approx. 3.7 tonnes of space c a. 3.0 x 2.2 x 2.0 m accessories main and sub spindle yes and y axis c - axis 0.001 Ⱐfor main u.gegenspindel y - axis +-40 mm 12 angetr. coolant system chip conveyor additional information tools

well preserved machine
 with counter spindle
 4 axis machine
 c axis and y axe
 5 live tools + 10 fixed tools
 spaenefoerderer
 cnc siemens 840 d shop mill ENGINE DETAILS STOCK NUMBER 1105-02499 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE GILDEMEISTER TYPE CTX 320 V6 BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY FROM STOCK OF BASED ON CARGO FROM SITE WORK TECHNICAL DETAILS TURNING DIAMETER 505 MM TURNING LENGTH 450 MM CONTROL SIEMENS 840 D SHOP MILL LINING DIAMETER 210 MM ROD DIAMETER 51 MM TURNING DIAMETER OVER BED SLIDE 375 X WAY 213 MM Z-AXIS 450 MM SPINDLE SPEEDS 25-6000 RPM SPINDLE MOTOR 16 / 12 KW TORQUE ON THE S PINDEL 153 / 115 NM RAPID TRAVERSE - LONGITUDINAL/PLAN 60/12/45 M / MIN C-AXIS 0.001 / 360 ° NUMBER OF DRIVEN TOOLS 12 MM ø 30 MM POWER 9 / 6.7 KW SPEED RANGE 4500 / 4000 KW/RPM TOTAL POWER REQUIREMENT 29 MACHINE WEIGHT APPROX. 3.7 TONNES OF SPACE C A. 3.0 X 2.2 X 2.0 M ACCESSORIES MAIN AND SUB SPINDLE YES AND Y AXIS C - AXIS 0.001 ° FOR MAIN U.GEGENSPINDEL Y - AXIS +-40 MM 12 ANGETR. COOLANT SYSTEM CHIP CONVEYOR ADDITIONAL INFORMATION TOOLS WELL PRESERVED MACHINE WITH COUNTER SPINDLE 4 AXIS MACHINE C AXIS AND Y AXE 5 LIVE TOOLS + 10 FIXED TOOLS SPAENEFOERDERER CNC SIEMENS 840 D SHOP MILL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cutting area
around 0 â°: 250 mm
qudratisch 0 â°: 230 mm
flat 0 â°: 310 x 230
around 45 â°, r/l: 220 mm
qudratisch 45â°. r/l: 210 mm
flat 45 â°, r/l: 210 x 210
max clamping range: 315 mm
blade: 2835 x 25.4 x 0.9 mm
belt speed: 36-72 m / min
motor power: 1,5 / 1,8 kw
weight approx.: 500 kg (without accessories)
dimensions approx.: 2000 x 1100 x 2000 mm equipment:
-roller conveyor
-coolant system
-band saw blades CUTTING AREA AROUND 0 °: 250 MM QUDRATISCH 0 °: 230 MM FLAT 0 °: 310 X 230 AROUND 45 °, R/L: 220 MM QUDRATISCH 45°. R/L: 210 MM FLAT 45 °, R/L: 210 X 210 MAX CLAMPING RANGE: 315 MM BLADE: 2835 X 25.4 X 0.9 MM BELT SPEED: 36-72 M / MIN MOTOR POWER: 1,5 / 1,8 KW WEIGHT APPROX.: 500 KG (WITHOUT ACCESSORIES) DIMENSIONS APPROX.: 2000 X 1100 X 2000 MM EQUIPMENT: -ROLLER CONVEYOR -COOLANT SYSTEM -BAND SAW BLADES
Vendedor: Weber Werkzeugmaschinen GbR
Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx3dk12231; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX3DK12231; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-drilling capacity: 40 mm
chuck: mk 4
throat depth: 300 mm spindle stroke: 160 mm
speed, infinitely variable: 55-1450 rpm
feeds: 01 - 0.2 - 0.3 mm / rev
table size: 450 mm
engine power: 1.4 / 2,2 kw
approximate weight: 400 kg
color: blue/white

facilities:
-long spindle
-rotary table diameter 450 mm
-stepless speed adjustment
-3 feeds
-depth gauge 160 mm
-pole-reversible motor
-coolant machined t-slots and pump foot
-engine light
-emergency off pushbutton
-chuck DRILLING CAPACITY: 40 MM CHUCK: MK 4 THROAT DEPTH: 300 MM SPINDLE STROKE: 160 MM SPEED, INFINITELY VARIABLE: 55-1450 RPM FEEDS: 01 - 0.2 - 0.3 MM / REV TABLE SIZE: 450 MM ENGINE POWER: 1.4 / 2,2 KW APPROXIMATE WEIGHT: 400 KG COLOR: BLUE/WHITE FACILITIES: -LONG SPINDLE -ROTARY TABLE DIAMETER 450 MM -STEPLESS SPEED ADJUSTMENT -3 FEEDS -DEPTH GAUGE 160 MM -POLE-REVERSIBLE MOTOR -COOLANT MACHINED T-SLOTS AND PUMP FOOT -ENGINE LIGHT -EMERGENCY OFF PUSHBUTTON -CHUCK
Vendedor: Weber Werkzeugmaschinen GbR
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-it is a used eberhardt spiral mixer extendable with 2 x bowls (for max 160kg dough) for sale. the spiral kneader is fully functional. the machine has a stainless steel spiral and two stainless steel boilers. operation via membrane keyboard, has two programmable speeds. the machine has a dust cover.
 IT IS A USED EBERHARDT SPIRAL MIXER EXTENDABLE WITH 2 X BOWLS (FOR MAX 160KG DOUGH) FOR SALE. THE SPIRAL KNEADER IS FULLY FUNCTIONAL. THE MACHINE HAS A STAINLESS STEEL SPIRAL AND TWO STAINLESS STEEL BOILERS. OPERATION VIA MEMBRANE KEYBOARD, HAS TWO PROGRAMMABLE SPEEDS. THE MACHINE HAS A DUST COVER.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 7.800 €
Ubicación: Land-it is a used fortuna bun press gr. 4 (semiautomatic, 30-teilig)-bj 2015 for sale. the sandwich press is fully functional in almost like new condition and runs very quietly. the press plate and the knife star are in impeccable condition. the machine has been repainted. the weight of the machine is 40gr. -110 gr. each piece of dough (30-teilig). dough deposit: 1200gr. -3300gr. dough should be just pressed and cut a higher weight range is possible.
incl. 3 x effect plates (active panels more upon request).
height: 1350mm, width: 580mm, depth: 580mm, weight: 330kg
power: approx. 0,74 kw IT IS A USED FORTUNA BUN PRESS GR. 4 (SEMIAUTOMATIC, 30-TEILIG)-BJ 2015 FOR SALE. THE SANDWICH PRESS IS FULLY FUNCTIONAL IN ALMOST LIKE NEW CONDITION AND RUNS VERY QUIETLY. THE PRESS PLATE AND THE KNIFE STAR ARE IN IMPECCABLE CONDITION. THE MACHINE HAS BEEN REPAINTED. THE WEIGHT OF THE MACHINE IS 40GR. -110 GR. EACH PIECE OF DOUGH (30-TEILIG). DOUGH DEPOSIT: 1200GR. -3300GR. DOUGH SHOULD BE JUST PRESSED AND CUT A HIGHER WEIGHT RANGE IS POSSIBLE. INCL. 3 X EFFECT PLATES (ACTIVE PANELS MORE UPON REQUEST). HEIGHT: 1350MM, WIDTH: 580MM, DEPTH: 580MM, WEIGHT: 330KG POWER: APPROX. 0,74 KW
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-lacquering automat schiele vacumat edge coat
type: technikum
start of operation 2011

was used to lacquer the edges of doors with water based lacquer
to use the machine for another purpose the screen must be changed.

components of the machine:
1. basic machine midi-version
    - frame from stainless steel
    - double membrane-lacquer pump
    - pulsation damper 1 1/2 “
    - vacuum compressor 12,5 kw to generate under pressure
    - filter components to clean the exhaust air and to filter the lacquer
- switch cabinet
2. application system edgecoat „vario“ with automatic height  
    adjustment. with the variohead differend heights of the same profiles 
    can be lacquered without retooling or machine stop.
3. edge transport with watercooled cooling plates to protect the transport 
    system.
4. nir dryer incl. control and light barrier water cooled – 
    connection to water necessary

basic machine and lacquering unit are specially coated to reduce set up times.
cooled separator system and cooled edge coating head to avoid hardening of lacquer material.

workpiece sizes:
length 1900 – 2100 mm
width 900 – 1100 mm
height max. 50 mm

power consumption approximately:
vacumat incl. cooling 15 kw
transport  2,2 kw
nir-dryer 14 kw
overall: 31,2 kw

climate condition:
temperature 15 – 40 °c
relative air humidity 20 – 80 %
dew point 8 – 25 °c
operating temperature 8 – 25 °c

compressed air need 1 x ½“ pipe, 6 bar, approx. 400 l/min.

technical details:
infeed speed 15 m/min.
distance between compressor and machine max. 3 m
cable length between switch cabinet and basic machine, vacuum compressor max. 12 m
electric connection 400 v – 3 ph 50 hz
24 v dc
line voltage fluctuation max. + - 6 %
ip 54
noise less then 85 db(a)
fence side right

 LACQUERING AUTOMAT SCHIELE VACUMAT EDGE COAT TYPE: TECHNIKUM START OF OPERATION 2011 WAS USED TO LACQUER THE EDGES OF DOORS WITH WATER BASED LACQUER TO USE THE MACHINE FOR ANOTHER PURPOSE THE SCREEN MUST BE CHANGED. COMPONENTS OF THE MACHINE: 1. BASIC MACHINE MIDI-VERSION - FRAME FROM STAINLESS STEEL - DOUBLE MEMBRANE-LACQUER PUMP - PULSATION DAMPER 1 1/2 “ - VACUUM COMPRESSOR 12,5 KW TO GENERATE UNDER PRESSURE - FILTER COMPONENTS TO CLEAN THE EXHAUST AIR AND TO FILTER THE LACQUER - SWITCH CABINET 2. APPLICATION SYSTEM EDGECOAT „VARIO“ WITH AUTOMATIC HEIGHT ADJUSTMENT. WITH THE VARIOHEAD DIFFEREND HEIGHTS OF THE SAME PROFILES CAN BE LACQUERED WITHOUT RETOOLING OR MACHINE STOP. 3. EDGE TRANSPORT WITH WATERCOOLED COOLING PLATES TO PROTECT THE TRANSPORT SYSTEM. 4. NIR DRYER INCL. CONTROL AND LIGHT BARRIER WATER COOLED – CONNECTION TO WATER NECESSARY BASIC MACHINE AND LACQUERING UNIT ARE SPECIALLY COATED TO REDUCE SET UP TIMES. COOLED SEPARATOR SYSTEM AND COOLED EDGE COATING HEAD TO AVOID HARDENING OF LACQUER MATERIAL. WORKPIECE SIZES: LENGTH 1900 – 2100 MM WIDTH 900 – 1100 MM HEIGHT MAX. 50 MM POWER CONSUMPTION APPROXIMATELY: VACUMAT INCL. COOLING 15 KW TRANSPORT 2,2 KW NIR-DRYER 14 KW OVERALL: 31,2 KW CLIMATE CONDITION: TEMPERATURE 15 – 40 °C RELATIVE AIR HUMIDITY 20 – 80 % DEW POINT 8 – 25 °C OPERATING TEMPERATURE 8 – 25 °C COMPRESSED AIR NEED 1 X ½“ PIPE, 6 BAR, APPROX. 400 L/MIN. TECHNICAL DETAILS: INFEED SPEED 15 M/MIN. DISTANCE BETWEEN COMPRESSOR AND MACHINE MAX. 3 M CABLE LENGTH BETWEEN SWITCH CABINET AND BASIC MACHINE, VACUUM COMPRESSOR MAX. 12 M ELECTRIC CONNECTION 400 V – 3 PH 50 HZ 24 V DC LINE VOLTAGE FLUCTUATION MAX. + - 6 % IP 54 NOISE LESS THEN 85 DB(A) FENCE SIDE RIGHT
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 7.500 €
Ubicación: Land-it is a used kemper dough divider and knitting machine exacta 3-row for sale.
the machine works exactly the weight.
-range of weight: 35gr. -170gr. (in order to cover the full weight range five different chamber drum are required)
-incl. 2 x chamber drum (for 130gr + smaller weights)
-performance: with 3-row 540 pieces / hour
-hopper size: approx. 40 kg
-dimensions: length: approx. 1350cm, width: 780mm, height: approx. 1650mm
-weight: approx. 750kg
-power consumption: approx. 2.4 kw

on request, a video can be sent to from the test run. IT IS A USED KEMPER DOUGH DIVIDER AND KNITTING MACHINE EXACTA 3-ROW FOR SALE. THE MACHINE WORKS EXACTLY THE WEIGHT. -RANGE OF WEIGHT: 35GR. -170GR. (IN ORDER TO COVER THE FULL WEIGHT RANGE FIVE DIFFERENT CHAMBER DRUM ARE REQUIRED) -INCL. 2 X CHAMBER DRUM (FOR 130GR + SMALLER WEIGHTS) -PERFORMANCE: WITH 3-ROW 540 PIECES / HOUR -HOPPER SIZE: APPROX. 40 KG -DIMENSIONS: LENGTH: APPROX. 1350CM, WIDTH: 780MM, HEIGHT: APPROX. 1650MM -WEIGHT: APPROX. 750KG -POWER CONSUMPTION: APPROX. 2.4 KW ON REQUEST, A VIDEO CAN BE SENT TO FROM THE TEST RUN.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 59.000 €
Ubicación: Land-length of the drum:     4.70 m
diameter oft he drum:   1.80 m
hole size of the drum:  has to be agreed
 
has got:
new brushes for the cleaning brush of the drum
new rubber belt for the side discharge conveyor
new rubber belt for the square discharge conveyor
 
brakes and light sytem have been completely overhauled LENGTH OF THE DRUM: 4.70 M DIAMETER OFT HE DRUM: 1.80 M HOLE SIZE OF THE DRUM: HAS TO BE AGREED HAS GOT: NEW BRUSHES FOR THE CLEANING BRUSH OF THE DRUM NEW RUBBER BELT FOR THE SIDE DISCHARGE CONVEYOR NEW RUBBER BELT FOR THE SQUARE DISCHARGE CONVEYOR BRAKES AND LIGHT SYTEM HAVE BEEN COMPLETELY OVERHAULED
Vendedor: Hawamex Recycling und Umwelttechnik GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-punching power: 28t
plate thickness max.: 6mm
punching diameter max.: 105mm
working range without repositioning: 2.000x1.250mm
number of strokes max.: 250 1/min
positioning speed x-axis: 60m/min
positioning speed y-axis: 30m/min
maximum piece weight: 200kg

equipment:
- cnc labod control unit
- desktop pc programming software
- 6-way revotool
- 2x clamps
- extraction of the punched out pieces
- repositioning up to 10m und clamp movement without plate contact
- diverse tools
- user manual  PUNCHING POWER: 28T PLATE THICKNESS MAX.: 6MM PUNCHING DIAMETER MAX.: 105MM WORKING RANGE WITHOUT REPOSITIONING: 2.000X1.250MM NUMBER OF STROKES MAX.: 250 1/MIN POSITIONING SPEED X-AXIS: 60M/MIN POSITIONING SPEED Y-AXIS: 30M/MIN MAXIMUM PIECE WEIGHT: 200KG EQUIPMENT: - CNC LABOD CONTROL UNIT - DESKTOP PC PROGRAMMING SOFTWARE - 6-WAY REVOTOOL - 2X CLAMPS - EXTRACTION OF THE PUNCHED OUT PIECES - REPOSITIONING UP TO 10M UND CLAMP MOVEMENT WITHOUT PLATE CONTACT - DIVERSE TOOLS - USER MANUAL
Vendedor: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-description
brand	scotsman
model	mar 121 spl.kvp
id	0091
status	active
price	1.500 € + vat
location	oradea (ro)

ice flake machine scotsman frimont mar 121 spl.kvp. dimensions (l x w x h): 876 x 661 x 520 mm. production capacity: 850 kg / 24h (salted water), 1000 kg / 24h (freshwater). condenser capacity: 9750 kcal / h (td 10 ÷ 15 ° c). minimum ambient temperature: 5 ° c, maximum ambient temperature: 40 ° c.

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND SCOTSMAN MODEL MAR 121 SPL.KVP ID 0091 STATUS ACTIVE PRICE 1.500 € + VAT LOCATION ORADEA (RO) ICE FLAKE MACHINE SCOTSMAN FRIMONT MAR 121 SPL.KVP. DIMENSIONS (L X W X H): 876 X 661 X 520 MM. PRODUCTION CAPACITY: 850 KG / 24H (SALTED WATER), 1000 KG / 24H (FRESHWATER). CONDENSER CAPACITY: 9750 KCAL / H (TD 10 ÷ 15 ° C). MINIMUM AMBIENT TEMPERATURE: 5 ° C, MAXIMUM AMBIENT TEMPERATURE: 40 ° C. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)