234 ofertas

Año de construcción: usado
Ubicación: Land-machine specification

year: 1997 
control unit: selogica 
robot: arburg-3-achs-nc-handling 

injection unit: 150/...
screw diameter: 30 mm 
injection pressure: 1950 bar 
injection volume: 78 ccm 
shot capacity: 65 g 

clamping unit: .../500
clamping force: 50 t 
platen size: 405 x 405 mm 
distance between tie bars: 270 x 270 mm 
mould height: 200... mm 
opening storke: 350 mm 
max.daylight: 550 mm 
ejector stroke: 125 mm 
drive power of the hydraulic pump: 18,5 kw 
cylinder heating power: 4 x 1,2 kw 
general information:
screen text: german 

delivery time: now 
machine dimensions(m) lxwxh: 3,6 x 2 x 1,6 m 
weight: 2.400 kg 

equipment:
- incl. robot arburg-3-axies-nc-handling
- screw extremely wear resistant and corrosion resistant
- safety housing
- incl. conveyor belt
- 3 x pneumatic valve
- 2 x core pull MACHINE SPECIFICATION YEAR: 1997 CONTROL UNIT: SELOGICA ROBOT: ARBURG-3-ACHS-NC-HANDLING INJECTION UNIT: 150/... SCREW DIAMETER: 30 MM INJECTION PRESSURE: 1950 BAR INJECTION VOLUME: 78 CCM SHOT CAPACITY: 65 G CLAMPING UNIT: .../500 CLAMPING FORCE: 50 T PLATEN SIZE: 405 X 405 MM DISTANCE BETWEEN TIE BARS: 270 X 270 MM MOULD HEIGHT: 200... MM OPENING STORKE: 350 MM MAX.DAYLIGHT: 550 MM EJECTOR STROKE: 125 MM DRIVE POWER OF THE HYDRAULIC PUMP: 18,5 KW CYLINDER HEATING POWER: 4 X 1,2 KW GENERAL INFORMATION: SCREEN TEXT: GERMAN DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,6 X 2 X 1,6 M WEIGHT: 2.400 KG EQUIPMENT: - INCL. ROBOT ARBURG-3-AXIES-NC-HANDLING - SCREW EXTREMELY WEAR RESISTANT AND CORROSION RESISTANT - SAFETY HOUSING - INCL. CONVEYOR BELT - 3 X PNEUMATIC VALVE - 2 X CORE PULL
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-make unknown, new unknown, mounted on legs /skid, with switchgear , closed stirring vessel (1x), material stainless steel , capacity 150 ltr, vessel sizes dia. 500x750mm, dished bottom , dished top side , with propellor stirrer make prg warburg, type r-100l-80 (96/14507), motor 0,75 kw, 400 volt, speed mixing shaft ± 690 rpm, floorspace 1,5x1,2 m, total height 2,1 m, extra specifications - with lobe pump make fristam, type flfn-75l (motor 1,5 kw, 230/400 volt)stirring vesselsstirring vessels > stirring vessels what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, NEW UNKNOWN, MOUNTED ON LEGS /SKID, WITH SWITCHGEAR , CLOSED STIRRING VESSEL (1X), MATERIAL STAINLESS STEEL , CAPACITY 150 LTR, VESSEL SIZES DIA. 500X750MM, DISHED BOTTOM , DISHED TOP SIDE , WITH PROPELLOR STIRRER MAKE PRG WARBURG, TYPE R-100L-80 (96/14507), MOTOR 0,75 KW, 400 VOLT, SPEED MIXING SHAFT ± 690 RPM, FLOORSPACE 1,5X1,2 M, TOTAL HEIGHT 2,1 M, EXTRA SPECIFICATIONS - WITH LOBE PUMP MAKE FRISTAM, TYPE FLFN-75L (MOTOR 1,5 KW, 230/400 VOLT)STIRRING VESSELSSTIRRING VESSELS > STIRRING VESSELS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land--arburg allrounder centex 320 cd-500-225
-clamping force 50 t
-with walldorf-handling
-from model year 1998
-tie bar distance 32 x 32 screw diameter 35
-heating 9.4 kw
-control: dialogika bj 1998-updated mature, but only an expression
-universal range of application -ARBURG ALLROUNDER CENTEX 320 CD-500-225 -CLAMPING FORCE 50 T -WITH WALLDORF-HANDLING -FROM MODEL YEAR 1998 -TIE BAR DISTANCE 32 X 32 SCREW DIAMETER 35 -HEATING 9.4 KW -CONTROL: DIALOGIKA BJ 1998-UPDATED MATURE, BUT ONLY AN EXPRESSION -UNIVERSAL RANGE OF APPLICATION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-screw size:15 mm<br/>injection shot weight in polysterol:20 g/ps<br/>closing pressure:350 kn<br/>daylight:221 mm<br/>opening stroke:200 mm (max.) mm<br/>mould height - max./min.:150-300 mm<br/>control:selogica <br/>daylight between platens - max.:350-500 mm<br/>total power requirement:14,6 kw<br/>weight of the machine ca.:1,1 t<br/>dimensions of the machine ca.: m<br/><br/>version k - with toggle system - tft flat screen colour - selogica control - pre-laid plastification unit  - connection for mould blow unit - automatic central lubrication of grease - electr. and mechanical electr. and mechanical preparation for external robot system - interface for robot (according euromap 67), 50 poles - interface for host computer - interface for printer serial v 24 - arburg equipment packages no.: 1,2,3,5,6,7 this machine will be cleaned and function tested in our company. this machine can be tested at every time. SCREW SIZE:15 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:20 G/PS
CLOSING PRESSURE:350 KN
DAYLIGHT:221 MM
OPENING STROKE:200 MM (MAX.) MM
MOULD HEIGHT - MAX./MIN.:150-300 MM
CONTROL:SELOGICA
DAYLIGHT BETWEEN PLATENS - MAX.:350-500 MM
TOTAL POWER REQUIREMENT:14,6 KW
WEIGHT OF THE MACHINE CA.:1,1 T
DIMENSIONS OF THE MACHINE CA.: M

VERSION K - WITH TOGGLE SYSTEM - TFT FLAT SCREEN COLOUR - SELOGICA CONTROL - PRE-LAID PLASTIFICATION UNIT - CONNECTION FOR MOULD BLOW UNIT - AUTOMATIC CENTRAL LUBRICATION OF GREASE - ELECTR. AND MECHANICAL ELECTR. AND MECHANICAL PREPARATION FOR EXTERNAL ROBOT SYSTEM - INTERFACE FOR ROBOT (ACCORDING EUROMAP 67), 50 POLES - INTERFACE FOR HOST COMPUTER - INTERFACE FOR PRINTER SERIAL V 24 - ARBURG EQUIPMENT PACKAGES NO.: 1,2,3,5,6,7 THIS MACHINE WILL BE CLEANED AND FUNCTION TESTED IN OUR COMPANY. THIS MACHINE CAN BE TESTED AT EVERY TIME.
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-closing force: 50t, distance between tie bars: 320x320mm, screw diameter: 35mm, heating output: 9.4kw, controls: arburg dialogika, including handling walldorf.  CLOSING FORCE: 50T, DISTANCE BETWEEN TIE BARS: 320X320MM, SCREW DIAMETER: 35MM, HEATING OUTPUT: 9.4KW, CONTROLS: ARBURG DIALOGIKA, INCLUDING HANDLING WALLDORF.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-screw size:45 mm<br/>injection shot weight in polysterol:291 g<br/>clamping force:2.000 kn<br/>: <br/>injection unit: <br/>screw size:45 mm<br/>max. swept volumne:318 cm³<br/>injection shot weight in polysterol:291 g/ps<br/>injection pressure:2.470 bar<br/>: <br/>clamping unit: <br/>clamping force:200 t<br/>tie bar distance:570 x 570 mm<br/>mould hight min.:250 mm<br/>opening stroke:450 mm<br/>: <br/>control: <br/>microprocessor control:selogica <br/>screen text:deutsch <br/>manual:deutsch / german <br/>: <br/>equipment: <br/>robot interface:euromap 67 <br/>core pull:2 x <br/>:18 x <br/>: <br/>other datas: <br/>pump drive power:37,0 kw<br/>installed heating capacity:13,8 kw<br/>total weight:7.900 kg<br/>dimension l x w x h:5,8 x 2,0 x 2,2 m<br/><br/>terms of payment: 50 with order, 50 % prior to delivery SCREW SIZE:45 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:291 G
CLAMPING FORCE:2.000 KN
:
INJECTION UNIT:
SCREW SIZE:45 MM
MAX. SWEPT VOLUMNE:318 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:291 G/PS
INJECTION PRESSURE:2.470 BAR
:
CLAMPING UNIT:
CLAMPING FORCE:200 T
TIE BAR DISTANCE:570 X 570 MM
MOULD HIGHT MIN.:250 MM
OPENING STROKE:450 MM
:
CONTROL:
MICROPROCESSOR CONTROL:SELOGICA
SCREEN TEXT:DEUTSCH
MANUAL:DEUTSCH / GERMAN
:
EQUIPMENT:
ROBOT INTERFACE:EUROMAP 67
CORE PULL:2 X
:18 X
:
OTHER DATAS:
PUMP DRIVE POWER:37,0 KW
INSTALLED HEATING CAPACITY:13,8 KW
TOTAL WEIGHT:7.900 KG
DIMENSION L X W X H:5,8 X 2,0 X 2,2 M

TERMS OF PAYMENT: 50 WITH ORDER, 50 % PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: selogica 

injection unit: 320 s/...
screw diameter: 22 mm 
injection pressure: 2320 bar 
injection volume: 30 ccm 
shot capacity: 25 g 

clamping unit: /500...
clamping force: 50 t 
platen size: 498 x 498 mm 
distance between tie bars: 320 x 320 mm 
mould height: 225 mm 
opening storke: 350 mm 
max.daylight: 575 mm 
ejector stroke: 125 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,1 x 1,2 x 1,8 m 
weight: 2250 kg  MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: SELOGICA INJECTION UNIT: 320 S/... SCREW DIAMETER: 22 MM INJECTION PRESSURE: 2320 BAR INJECTION VOLUME: 30 CCM SHOT CAPACITY: 25 G CLAMPING UNIT: /500... CLAMPING FORCE: 50 T PLATEN SIZE: 498 X 498 MM DISTANCE BETWEEN TIE BARS: 320 X 320 MM MOULD HEIGHT: 225 MM OPENING STORKE: 350 MM MAX.DAYLIGHT: 575 MM EJECTOR STROKE: 125 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,1 X 1,2 X 1,8 M WEIGHT: 2250 KG
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size:35 mm<br/>injection shot weight in polysterol:132 g<br/>clamping force:1000 kn<br/>: <br/>injection unit: <br/>screw size:35 mm<br/>max. swept volumne:154 cm³<br/>injection shot weight in polysterol:132 g/ps<br/>injection pressure:1.820 bar<br/>clamping unit: <br/>clamping force:100 t<br/>tie bar distance:420x420 mm<br/>mould hight min.:250 mm<br/>opening stroke:500 mm<br/>daylight between platens - max.:750 mm<br/>control: <br/>microprocessor control:selogica <br/>screen text:deutsch <br/>manual:deutsch / german <br/>equipment: <br/>robot interface:euromap 12 <br/>core pull:1 x <br/>without hopper / without water distributor: <br/>other datas: <br/>pump drive power:15,0 kw<br/>total connection power:23,6 kw<br/>total weight:3.300 kg<br/>dimension l x w x h:4,30 x 1,60 x 2,10 m<br/><br/> payment: 100% prior to delivery SCREW SIZE:35 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:132 G
CLAMPING FORCE:1000 KN
:
INJECTION UNIT:
SCREW SIZE:35 MM
MAX. SWEPT VOLUMNE:154 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:132 G/PS
INJECTION PRESSURE:1.820 BAR
CLAMPING UNIT:
CLAMPING FORCE:100 T
TIE BAR DISTANCE:420X420 MM
MOULD HIGHT MIN.:250 MM
OPENING STROKE:500 MM
DAYLIGHT BETWEEN PLATENS - MAX.:750 MM
CONTROL:
MICROPROCESSOR CONTROL:SELOGICA
SCREEN TEXT:DEUTSCH
MANUAL:DEUTSCH / GERMAN
EQUIPMENT:
ROBOT INTERFACE:EUROMAP 12
CORE PULL:1 X
WITHOUT HOPPER / WITHOUT WATER DISTRIBUTOR:
OTHER DATAS:
PUMP DRIVE POWER:15,0 KW
TOTAL CONNECTION POWER:23,6 KW
TOTAL WEIGHT:3.300 KG
DIMENSION L X W X H:4,30 X 1,60 X 2,10 M

PAYMENT: 100% PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Año de construcción: usado
Ubicación: Land-manufacturer: arburg
type: 320 ks 700-250 (selecta)
year of construction: 2000     
control: selogica
operating hours approx. 53,600 h


clamping unit
clamping force: 700 kn/70 tons
clamping plates (h x v): 476 x476 mm
bar distance (h x v): 320 x 320 mm
tool height min.     200 mm
opening stroke:       450 mm
max plate distance: 650 mm

injection unit
screw diameter 35 mm
    (highly wear-resistant)
injection pressure 1820 bar
injection volume: 144 ccm
injection weight, ps: 89 g

weights/dimensions
	3,400 m x 1.45 m x 1.765 m
weight: 2.270 kg
extras:
- highly wear-resistant screw
- 4x water battery
- machine feet
- handling robot interface

- available at our warehouse in hannover/germany
. the offered machine was functional tested
- all offered machines are in our sole ownership
 MANUFACTURER: ARBURG TYPE: 320 KS 700-250 (SELECTA) YEAR OF CONSTRUCTION: 2000 CONTROL: SELOGICA OPERATING HOURS APPROX. 53,600 H CLAMPING UNIT CLAMPING FORCE: 700 KN/70 TONS CLAMPING PLATES (H X V): 476 X476 MM BAR DISTANCE (H X V): 320 X 320 MM TOOL HEIGHT MIN. 200 MM OPENING STROKE: 450 MM MAX PLATE DISTANCE: 650 MM INJECTION UNIT SCREW DIAMETER 35 MM (HIGHLY WEAR-RESISTANT) INJECTION PRESSURE 1820 BAR INJECTION VOLUME: 144 CCM INJECTION WEIGHT, PS: 89 G WEIGHTS/DIMENSIONS 3,400 M X 1.45 M X 1.765 M WEIGHT: 2.270 KG EXTRAS: - HIGHLY WEAR-RESISTANT SCREW - 4X WATER BATTERY - MACHINE FEET - HANDLING ROBOT INTERFACE - AVAILABLE AT OUR WAREHOUSE IN HANNOVER/GERMANY . THE OFFERED MACHINE WAS FUNCTIONAL TESTED - ALL OFFERED MACHINES ARE IN OUR SOLE OWNERSHIP
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Ubicación: Land-clamping force: 250 kn<br/>injection volume: 20 cm³<br/>screw diameter: 18 mm<br/>screw length:  <br/>platen size: 346 x 346 mm<br/>closing stroke: 275 mm<br/><br/><br/><br/><br/> CLAMPING FORCE: 250 KN
INJECTION VOLUME: 20 CM³
SCREW DIAMETER: 18 MM
SCREW LENGTH:
PLATEN SIZE: 346 X 346 MM
CLOSING STROKE: 275 MM




Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-make: arburg
type: 570c 2000-675
year of construction 1999

operating hour: approx. 54,900 h

clamping unit
clamping force: 2000 kn/200 to.
distance between tie bars: 570 x 570 mm
distance between plates: 950 mm max.
opening stroke: 650 mm 
tool height 300 mm
panel size: 795 x 795 mm

injection unit
screw size: 60 mm
injection volume: 508 ccm
spray-applied weight: 427 gr.

extras
handling interface
core pull

weight: 7,450 kg.

available immediately in our warehouse
hanover/germany
tested, fully functional, partially overhauled, constantly maintained
 MAKE: ARBURG TYPE: 570C 2000-675 YEAR OF CONSTRUCTION 1999 OPERATING HOUR: APPROX. 54,900 H CLAMPING UNIT CLAMPING FORCE: 2000 KN/200 TO. DISTANCE BETWEEN TIE BARS: 570 X 570 MM DISTANCE BETWEEN PLATES: 950 MM MAX. OPENING STROKE: 650 MM TOOL HEIGHT 300 MM PANEL SIZE: 795 X 795 MM INJECTION UNIT SCREW SIZE: 60 MM INJECTION VOLUME: 508 CCM SPRAY-APPLIED WEIGHT: 427 GR. EXTRAS HANDLING INTERFACE CORE PULL WEIGHT: 7,450 KG. AVAILABLE IMMEDIATELY IN OUR WAREHOUSE HANOVER/GERMANY TESTED, FULLY FUNCTIONAL, PARTIALLY OVERHAULED, CONSTANTLY MAINTAINED
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Ubicación: Land-screw size:35 mm<br/>injection shot weight in polysterol:132 g<br/>clamping force:1000 kn<br/>: <br/>injection unit: <br/>screw size:35 mm<br/>max. swept volumne:154 cm³<br/>injection shot weight in polysterol:132 g/ps<br/>injection pressure:1.820 bar<br/>clamping unit: <br/>clamping force:100 t<br/>tie bar distance:420x420 mm<br/>mould hight min.:250 mm<br/>opening stroke:500 mm<br/>daylight between platens - max.:750 mm<br/>control: <br/>microprocessor control:selogica <br/>screen text:deutsch <br/>manual:deutsch / german <br/>equipment: <br/>robot interface:euromap 12 <br/>core pull:1 x <br/>without hopper / without water distributor: <br/>other datas: <br/>pump drive power:15,0 kw<br/>total connection power:23,6 kw<br/>total weight:3.300 kg<br/>dimension l x w x h:3,10 x 1,70 x 2,60 m<br/><br/> payment: 100% prior to delivery SCREW SIZE:35 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:132 G
CLAMPING FORCE:1000 KN
:
INJECTION UNIT:
SCREW SIZE:35 MM
MAX. SWEPT VOLUMNE:154 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:132 G/PS
INJECTION PRESSURE:1.820 BAR
CLAMPING UNIT:
CLAMPING FORCE:100 T
TIE BAR DISTANCE:420X420 MM
MOULD HIGHT MIN.:250 MM
OPENING STROKE:500 MM
DAYLIGHT BETWEEN PLATENS - MAX.:750 MM
CONTROL:
MICROPROCESSOR CONTROL:SELOGICA
SCREEN TEXT:DEUTSCH
MANUAL:DEUTSCH / GERMAN
EQUIPMENT:
ROBOT INTERFACE:EUROMAP 12
CORE PULL:1 X
WITHOUT HOPPER / WITHOUT WATER DISTRIBUTOR:
OTHER DATAS:
PUMP DRIVE POWER:15,0 KW
TOTAL CONNECTION POWER:23,6 KW
TOTAL WEIGHT:3.300 KG
DIMENSION L X W X H:3,10 X 1,70 X 2,60 M

PAYMENT: 100% PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Año de construcción: usado
Ubicación: Land-used injection moulding machine 
-new screw - new cylinder

manufacturer: arburg 
type: 520c 2000-675
control selogica
year of construction: 2000
operating hours: 56,400 h

***features/extras: 
-2x core pull
- screw cylinder new

clamping unit: 
clamping force: 2000 kn/ 200 tons
bar dimensions h x v   520 x 520 mm
plate size hxv:                728 x 728 mm
installation height min: 250 mm
distance daylight plates max.: 900 mm
opening stroke:                650 mm
ejector stroke:                  225 mm
ejector force:                    66 kn

injection unit
screw diameter        55 mm
displacement          427 ccm
injection weight: 360 gr./ps
injection pressure: 1720 bar
nozzle contact force: 70 kn
cylinder heating capacity: 6 x 2200 w+600w nozzle
dimensions - weight in mtr.
            length:5,00 depth:1,80 height: 2,22 
            weight: 7.150 kg

now available from our stock hannover/germany
machine is in our sole property
function tested, checked and partly overhauled
 USED INJECTION MOULDING MACHINE -NEW SCREW - NEW CYLINDER MANUFACTURER: ARBURG TYPE: 520C 2000-675 CONTROL SELOGICA YEAR OF CONSTRUCTION: 2000 OPERATING HOURS: 56,400 H ***FEATURES/EXTRAS: -2X CORE PULL - SCREW CYLINDER NEW CLAMPING UNIT: CLAMPING FORCE: 2000 KN/ 200 TONS BAR DIMENSIONS H X V 520 X 520 MM PLATE SIZE HXV: 728 X 728 MM INSTALLATION HEIGHT MIN: 250 MM DISTANCE DAYLIGHT PLATES MAX.: 900 MM OPENING STROKE: 650 MM EJECTOR STROKE: 225 MM EJECTOR FORCE: 66 KN INJECTION UNIT SCREW DIAMETER 55 MM DISPLACEMENT 427 CCM INJECTION WEIGHT: 360 GR./PS INJECTION PRESSURE: 1720 BAR NOZZLE CONTACT FORCE: 70 KN CYLINDER HEATING CAPACITY: 6 X 2200 W+600W NOZZLE DIMENSIONS - WEIGHT IN MTR. LENGTH:5,00 DEPTH:1,80 HEIGHT: 2,22 WEIGHT: 7.150 KG NOW AVAILABLE FROM OUR STOCK HANNOVER/GERMANY MACHINE IS IN OUR SOLE PROPERTY FUNCTION TESTED, CHECKED AND PARTLY OVERHAULED
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 21.500 £
Ubicación: Land-category: injection moulding
id: 5630
manufacturer: arburg
model: 320c 500-250 universal 
viewing: undergoing refurbishment
condition: refurbished with guarantee
clamp force (t): 50
screw diameter (mm): 35
control system: selogica
lead time: 4 weeks from order
in production: yes
location: wellingborough, northamptonshire

undergoing refurbishment is this very rare ‘universal’ arburg 320c.  these machines have a tilting clamp unit which allows the clamp to be pivoted vertically, ideal for insert moulding.  the guards are operated hydraulically for low effort semi-auto runs.  originally manufactured in 1999, it is an arburg allrounder 320c 500-250 with selogica controller, 35mm screw diameter, air blast circuit and euromap 12 interface.

our refurbishment process has been designed to minimise the effects of the age and run hours, with all wear parts inspected and refurbished/replaced as necessary.  come and take a closer look or ask for our full work report (once refurbishment is complete) which shows it’s had more than a lick of paint.

refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.  CATEGORY: INJECTION MOULDING ID: 5630 MANUFACTURER: ARBURG MODEL: 320C 500-250 UNIVERSAL VIEWING: UNDERGOING REFURBISHMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 50 SCREW DIAMETER (MM): 35 CONTROL SYSTEM: SELOGICA LEAD TIME: 4 WEEKS FROM ORDER IN PRODUCTION: YES LOCATION: WELLINGBOROUGH, NORTHAMPTONSHIRE UNDERGOING REFURBISHMENT IS THIS VERY RARE ‘UNIVERSAL’ ARBURG 320C. THESE MACHINES HAVE A TILTING CLAMP UNIT WHICH ALLOWS THE CLAMP TO BE PIVOTED VERTICALLY, IDEAL FOR INSERT MOULDING. THE GUARDS ARE OPERATED HYDRAULICALLY FOR LOW EFFORT SEMI-AUTO RUNS. ORIGINALLY MANUFACTURED IN 1999, IT IS AN ARBURG ALLROUNDER 320C 500-250 WITH SELOGICA CONTROLLER, 35MM SCREW DIAMETER, AIR BLAST CIRCUIT AND EUROMAP 12 INTERFACE. OUR REFURBISHMENT PROCESS HAS BEEN DESIGNED TO MINIMISE THE EFFECTS OF THE AGE AND RUN HOURS, WITH ALL WEAR PARTS INSPECTED AND REFURBISHED/REPLACED AS NECESSARY. COME AND TAKE A CLOSER LOOK OR ASK FOR OUR FULL WORK REPORT (ONCE REFURBISHMENT IS COMPLETE) WHICH SHOWS IT’S HAD MORE THAN A LICK OF PAINT. REFURBISHED MACHINES UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Precio: 50 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-the machine is sold without syringe barrel. currently, a 35 worm is installed.
the hours of operation are estimated at 70.000 h. the hour meter is defective.
 THE MACHINE IS SOLD WITHOUT SYRINGE BARREL. CURRENTLY, A 35 WORM IS INSTALLED. THE HOURS OF OPERATION ARE ESTIMATED AT 70.000 H. THE HOUR METER IS DEFECTIVE.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 680 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-distance between tie bars: 420mm, closing force: 800kn, screw diameter: 35mm, operational hours: ca. 80,000h, including linear robot-system arburg multilift h. DISTANCE BETWEEN TIE BARS: 420MM, CLOSING FORCE: 800KN, SCREW DIAMETER: 35MM, OPERATIONAL HOURS: CA. 80,000H, INCLUDING LINEAR ROBOT-SYSTEM ARBURG MULTILIFT H.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 190 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-arburg 200 tons injection, moulding machine. this machine will be delivered completly checked repaired and tested and can be shown under power.

technical details	
clamping force	2.000 kn
year of building	1999
travel opening	650 mm
min. mould hight	300 mm
daylight max	950 mm
distance between tie bars (h x v)	570x570 mm
platen size	795x795 mm
screw diameter	60 mm
injection volumen	508 cm3
shotweight	427 ps
injection pressure	1440 bar
working hours	64.612 pump
working hours	54.863 automatic ARBURG 200 TONS INJECTION, MOULDING MACHINE. THIS MACHINE WILL BE DELIVERED COMPLETLY CHECKED REPAIRED AND TESTED AND CAN BE SHOWN UNDER POWER. TECHNICAL DETAILS CLAMPING FORCE 2.000 KN YEAR OF BUILDING 1999 TRAVEL OPENING 650 MM MIN. MOULD HIGHT 300 MM DAYLIGHT MAX 950 MM DISTANCE BETWEEN TIE BARS (H X V) 570X570 MM PLATEN SIZE 795X795 MM SCREW DIAMETER 60 MM INJECTION VOLUMEN 508 CM3 SHOTWEIGHT 427 PS INJECTION PRESSURE 1440 BAR WORKING HOURS 64.612 PUMP WORKING HOURS 54.863 AUTOMATIC
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-arburg 520 c 2000-675 injection, moulding machine., year of building 2000, approx. 56.286 working hours. this machine will be delivered completly checked repaired and tested and can be shown under power. new screw and barrel.  

technical details	
platen size	720 x 720 mm
distance between tie bars (h x v)	520 x 520 mm
travel opening	650 mm
min. mould hight	250 mm
daylight max	900 mm
screw diameter	55 mm
clamping force	2.000 kn
injection volumen	427 cm3
shotweight	360 ps
injection pressure	1720 bar
year of building	2000
working hours	56.286 ARBURG 520 C 2000-675 INJECTION, MOULDING MACHINE., YEAR OF BUILDING 2000, APPROX. 56.286 WORKING HOURS. THIS MACHINE WILL BE DELIVERED COMPLETLY CHECKED REPAIRED AND TESTED AND CAN BE SHOWN UNDER POWER. NEW SCREW AND BARREL. TECHNICAL DETAILS PLATEN SIZE 720 X 720 MM DISTANCE BETWEEN TIE BARS (H X V) 520 X 520 MM TRAVEL OPENING 650 MM MIN. MOULD HIGHT 250 MM DAYLIGHT MAX 900 MM SCREW DIAMETER 55 MM CLAMPING FORCE 2.000 KN INJECTION VOLUMEN 427 CM3 SHOTWEIGHT 360 PS INJECTION PRESSURE 1720 BAR YEAR OF BUILDING 2000 WORKING HOURS 56.286
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-screw size:30 mm<br/>injection shot weight in polysterol:65 g/ps<br/>closing pressure:400 kn<br/>daylight:270 x 270  mm<br/>opening stroke:350 mm<br/>mould height - max./min.:200 mm<br/>control:selogica (1. version) <br/>daylight between platens - max.:550 mm<br/>total power requirement:21 kw<br/>weight of the machine ca.: t<br/>dimensions of the machine ca.:4,30x1,60x2,08 m<br/><br/>few operation hours - condition like new -  - wear reisistant plastification unit  - fully hydraulic clamping unit - with vario system - mould blow unit - sorter unit - interface for host computer - interface for tempering unit - piezo charge amplifier - quality control - als host computer complete configuration - asl-ars aqs interface - software for host computer  - hydraulic ejector with adjustable stroke - screw decompression and open nozzle - with selogica (1st version) this machine will be function tested.  SCREW SIZE:30 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:65 G/PS
CLOSING PRESSURE:400 KN
DAYLIGHT:270 X 270 MM
OPENING STROKE:350 MM
MOULD HEIGHT - MAX./MIN.:200 MM
CONTROL:SELOGICA (1. VERSION)
DAYLIGHT BETWEEN PLATENS - MAX.:550 MM
TOTAL POWER REQUIREMENT:21 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.:4,30X1,60X2,08 M

FEW OPERATION HOURS - CONDITION LIKE NEW - - WEAR REISISTANT PLASTIFICATION UNIT - FULLY HYDRAULIC CLAMPING UNIT - WITH VARIO SYSTEM - MOULD BLOW UNIT - SORTER UNIT - INTERFACE FOR HOST COMPUTER - INTERFACE FOR TEMPERING UNIT - PIEZO CHARGE AMPLIFIER - QUALITY CONTROL - ALS HOST COMPUTER COMPLETE CONFIGURATION - ASL-ARS AQS INTERFACE - SOFTWARE FOR HOST COMPUTER - HYDRAULIC EJECTOR WITH ADJUSTABLE STROKE - SCREW DECOMPRESSION AND OPEN NOZZLE - WITH SELOGICA (1ST VERSION) THIS MACHINE WILL BE FUNCTION TESTED.
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-arburg 270s-250-60 + piker

nr. 193510

  year of production:	2004

technical data

  screw dia [mm]:	22
  shot weight [g]:	27
  injection pressure [bar]:	2340
  clamping force [kn]:	250
  tie bar distance [mm]:	270x270
  platen size [mm]:	400x400
  mould height min. [mm]:	200

control

  type of controls:	selogica
  monitor:	yes
  control cabinet:	yes
  language:	german

other

  power [kw]:	11,1
  workinghours [h]:	86253
  weight [kg]:	1900

gr - euromap ARBURG 270S-250-60 + PIKER NR. 193510 YEAR OF PRODUCTION: 2004 TECHNICAL DATA SCREW DIA [MM]: 22 SHOT WEIGHT [G]: 27 INJECTION PRESSURE [BAR]: 2340 CLAMPING FORCE [KN]: 250 TIE BAR DISTANCE [MM]: 270X270 PLATEN SIZE [MM]: 400X400 MOULD HEIGHT MIN. [MM]: 200 CONTROL TYPE OF CONTROLS: SELOGICA MONITOR: YES CONTROL CABINET: YES LANGUAGE: GERMAN OTHER POWER [KW]: 11,1 WORKINGHOURS [H]: 86253 WEIGHT [KG]: 1900 GR - EUROMAP
Vendedor: TADplast
Año de construcción: usado
Ubicación: Land-filling amount:100 liter<br/>heating:4,5 kw<br/>blower power:0,95 kw<br/>air volume:90 m3/h<br/>conveying height:3 m<br/>feed pressure:0,055 bar<br/>weight:150 kg<br/><br/>dry air granulate drying equipment make \ FILLING AMOUNT:100 LITER
HEATING:4,5 KW
BLOWER POWER:0,95 KW
AIR VOLUME:90 M3/H
CONVEYING HEIGHT:3 M
FEED PRESSURE:0,055 BAR
WEIGHT:150 KG

DRY AIR GRANULATE DRYING EQUIPMENT MAKE \"ARBURG\" TYPE THERMOLIFT 100-2 (NEWEST VERSION) WITH AUTOMATIC SWITCHON AND INTERVAL SWITCHING IN THERMALLY ISOLATED VERSION WITH ASSEMBLY DRY AIR OPERATION WITH FEEDING REGULATOR AND TUBE 3000 MM FUNCTION TESTED
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-arburg 270s-250-60 + piker

nr. 193511

  year of production:	2004

technical data

  screw dia [mm]:	22
  shot weight [g]:	27
  injection pressure [bar]:	2340
  clamping force [kn]:	250
  tie bar distance [mm]:	270x270
  platen size [mm]:	400x400
  mould height min. [mm]:	200

control

  type of controls:	selogica
  monitor:	yes
  control cabinet:	yes
  language:	german

other

  power [kw]:	11,1
  workinghours [h]:	86393
  weight [kg]:	1900

gr - euromap ARBURG 270S-250-60 + PIKER NR. 193511 YEAR OF PRODUCTION: 2004 TECHNICAL DATA SCREW DIA [MM]: 22 SHOT WEIGHT [G]: 27 INJECTION PRESSURE [BAR]: 2340 CLAMPING FORCE [KN]: 250 TIE BAR DISTANCE [MM]: 270X270 PLATEN SIZE [MM]: 400X400 MOULD HEIGHT MIN. [MM]: 200 CONTROL TYPE OF CONTROLS: SELOGICA MONITOR: YES CONTROL CABINET: YES LANGUAGE: GERMAN OTHER POWER [KW]: 11,1 WORKINGHOURS [H]: 86393 WEIGHT [KG]: 1900 GR - EUROMAP
Vendedor: TADplast
Año de construcción: usado
Ubicación: Land-screw size:40 mm<br/>injection shot weight in polysterol:172 g/ps<br/>closing pressure:800 kn<br/>daylight:370 x 370 mm<br/>opening stroke:500 mm<br/>mould height - max./min.:250 mm<br/>control:selogica <br/>daylight between platens - max.:750 mm<br/>total power requirement:23,9 kw<br/>weight of the machine ca.:3,2 t<br/>dimensions of the machine ca.: m<br/><br/>cs version iii - highly wear resistant plastification unit - with selogica control - technology stage 1 - with 1 regulating pump - connection for mould blow unit - core pull - interface for printer - arburg equipment packages no.: 1,2,3,5,6,7 this machine has been overhauled in our company according to our checklist and can be tested in our company. this machine can be inspected at every time. SCREW SIZE:40 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:172 G/PS
CLOSING PRESSURE:800 KN
DAYLIGHT:370 X 370 MM
OPENING STROKE:500 MM
MOULD HEIGHT - MAX./MIN.:250 MM
CONTROL:SELOGICA
DAYLIGHT BETWEEN PLATENS - MAX.:750 MM
TOTAL POWER REQUIREMENT:23,9 KW
WEIGHT OF THE MACHINE CA.:3,2 T
DIMENSIONS OF THE MACHINE CA.: M

CS VERSION III - HIGHLY WEAR RESISTANT PLASTIFICATION UNIT - WITH SELOGICA CONTROL - TECHNOLOGY STAGE 1 - WITH 1 REGULATING PUMP - CONNECTION FOR MOULD BLOW UNIT - CORE PULL - INTERFACE FOR PRINTER - ARBURG EQUIPMENT PACKAGES NO.: 1,2,3,5,6,7 THIS MACHINE HAS BEEN OVERHAULED IN OUR COMPANY ACCORDING TO OUR CHECKLIST AND CAN BE TESTED IN OUR COMPANY. THIS MACHINE CAN BE INSPECTED AT EVERY TIME.
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-closing force: 300kn, shot weight: 40g, heating output: 4,9kw, connected load: 12.4kw, weight: 1.98t, operational hours: ca. 40,000h, additional handling geiger miniphoenix: year of construction: 2006 available.  CLOSING FORCE: 300KN, SHOT WEIGHT: 40G, HEATING OUTPUT: 4,9KW, CONNECTED LOAD: 12.4KW, WEIGHT: 1.98T, OPERATIONAL HOURS: CA. 40,000H, ADDITIONAL HANDLING GEIGER MINIPHOENIX: YEAR OF CONSTRUCTION: 2006 AVAILABLE.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-screw size:60 mm<br/>injection shot weight in polysterol:558  g/ps<br/>closing pressure:2200 kn<br/>daylight:570 x 570 mm<br/>opening stroke:max. 650 mm<br/>mould height - max./min.:300 mm<br/>control:selogica <br/>daylight between platens - max.:950 mm mm<br/>total power requirement:79 kw<br/>weight of the machine ca.:8,8 t<br/>dimensions of the machine ca.: m<br/><br/>cs version v -  2 regulating pumps  - lcd control monitor, colour type - with selogica-control - highly wear resistant plastification unit - extended simultaneous fast movement with increased power/force - connection for mould blow unit - core pull - interface for robot - 3 additional heating circuits - switcheable foreign languages - interface for colouring device - position-regulated screw - arburg equipment packages no. 2,3 -  with substantial serial equipment this machine will be reconditioned in our company and can be tested after finishing in our company. this machine can be inspected at every time. SCREW SIZE:60 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:558 G/PS
CLOSING PRESSURE:2200 KN
DAYLIGHT:570 X 570 MM
OPENING STROKE:MAX. 650 MM
MOULD HEIGHT - MAX./MIN.:300 MM
CONTROL:SELOGICA
DAYLIGHT BETWEEN PLATENS - MAX.:950 MM MM
TOTAL POWER REQUIREMENT:79 KW
WEIGHT OF THE MACHINE CA.:8,8 T
DIMENSIONS OF THE MACHINE CA.: M

CS VERSION V - 2 REGULATING PUMPS - LCD CONTROL MONITOR, COLOUR TYPE - WITH SELOGICA-CONTROL - HIGHLY WEAR RESISTANT PLASTIFICATION UNIT - EXTENDED SIMULTANEOUS FAST MOVEMENT WITH INCREASED POWER/FORCE - CONNECTION FOR MOULD BLOW UNIT - CORE PULL - INTERFACE FOR ROBOT - 3 ADDITIONAL HEATING CIRCUITS - SWITCHEABLE FOREIGN LANGUAGES - INTERFACE FOR COLOURING DEVICE - POSITION-REGULATED SCREW - ARBURG EQUIPMENT PACKAGES NO. 2,3 - WITH SUBSTANTIAL SERIAL EQUIPMENT THIS MACHINE WILL BE RECONDITIONED IN OUR COMPANY AND CAN BE TESTED AFTER FINISHING IN OUR COMPANY. THIS MACHINE CAN BE INSPECTED AT EVERY TIME.
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Precio: 7.800 €
Ubicación: Land-type / type: arburg allrounder 420v-1000-150 / 60-2 k
year / year: 1998 mc no. 172 436
control / controller: specifications / technical specifications
clamping force / clamping force: to 100 / 981 kn
tie bar distance / dist. betw. tiebars: 420 x 420 mm
wz mounting height / mould hight: 250 mm
opening / opening stroke: 500 mm
auger / screw: 30 mm + 15 mm
stroke volume / shot volume: 106 cc + 11 ccm
spec. spritzdr. / injection pressure: 2500 bar
general / general
motor / engine 15 kw
heater / heater: 8,9 kw
hours of operation / operating hours: 78,000 h dimensions / dimensions: 4.3 x 2.3 x 2.1 m weight / weight: 5,0 t
accessories / equipment
teletext / screen text: german / english
user guide / manual: german / english
material hopper / hopper: no / no
core puller / core pulls: air valve / air valve: miscellaneous / other
location / location: camp / on floor
delivery time / delivery time: immediate / immediatly
delivery / delivery terms: free truck / free on truck loading
comments / remarks: as a normal machine without 2 k / can be used as a normal machine without 2 k
note / note: all offers are subject to change - reserved for sale - it apply the terms and conditions it the 2nd hd plastic machine in ug

all offers are subject to change - intermediate sales reserved - the general terms and conditions of the 2nd hd plastic machines ug apply
 TYPE / TYPE: ARBURG ALLROUNDER 420V-1000-150 / 60-2 K YEAR / YEAR: 1998 MC NO. 172 436 CONTROL / CONTROLLER: SPECIFICATIONS / TECHNICAL SPECIFICATIONS CLAMPING FORCE / CLAMPING FORCE: TO 100 / 981 KN TIE BAR DISTANCE / DIST. BETW. TIEBARS: 420 X 420 MM WZ MOUNTING HEIGHT / MOULD HIGHT: 250 MM OPENING / OPENING STROKE: 500 MM AUGER / SCREW: 30 MM + 15 MM STROKE VOLUME / SHOT VOLUME: 106 CC + 11 CCM SPEC. SPRITZDR. / INJECTION PRESSURE: 2500 BAR GENERAL / GENERAL MOTOR / ENGINE 15 KW HEATER / HEATER: 8,9 KW HOURS OF OPERATION / OPERATING HOURS: 78,000 H DIMENSIONS / DIMENSIONS: 4.3 X 2.3 X 2.1 M WEIGHT / WEIGHT: 5,0 T ACCESSORIES / EQUIPMENT TELETEXT / SCREEN TEXT: GERMAN / ENGLISH USER GUIDE / MANUAL: GERMAN / ENGLISH MATERIAL HOPPER / HOPPER: NO / NO CORE PULLER / CORE PULLS: AIR VALVE / AIR VALVE: MISCELLANEOUS / OTHER LOCATION / LOCATION: CAMP / ON FLOOR DELIVERY TIME / DELIVERY TIME: IMMEDIATE / IMMEDIATLY DELIVERY / DELIVERY TERMS: FREE TRUCK / FREE ON TRUCK LOADING COMMENTS / REMARKS: AS A NORMAL MACHINE WITHOUT 2 K / CAN BE USED AS A NORMAL MACHINE WITHOUT 2 K NOTE / NOTE: ALL OFFERS ARE SUBJECT TO CHANGE - RESERVED FOR SALE - IT APPLY THE TERMS AND CONDITIONS IT THE 2ND HD PLASTIC MACHINE IN UG ALL OFFERS ARE SUBJECT TO CHANGE - INTERMEDIATE SALES RESERVED - THE GENERAL TERMS AND CONDITIONS OF THE 2ND HD PLASTIC MACHINES UG APPLY
Vendedor: 2.HD PLASTIK MASCHINEN UG mbH
Año de construcción: usado
Ubicación: Land-screw size: 20 mm<br/>injection shot weight in polysterol: 25 g/ps<br/>closing pressure: 35 kn<br/>daylight: 270 x 270 mm<br/>opening stroke: max. 325 mm<br/>mould height - max./min.: 225 mm<br/>daylight between platens - max.: 550 mm<br/>total power requirement: 11 kw<br/>weight of the machine ca.: 1,8 t<br/>dimensions of the machine ca.: 3,70x1,75x1,95 m<br/>serial-no: 112067<br/><br/><br/><br/><br/> SCREW SIZE: 20 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 25 G/PS
CLOSING PRESSURE: 35 KN
DAYLIGHT: 270 X 270 MM
OPENING STROKE: MAX. 325 MM
MOULD HEIGHT - MAX./MIN.: 225 MM
DAYLIGHT BETWEEN PLATENS - MAX.: 550 MM
TOTAL POWER REQUIREMENT: 11 KW
WEIGHT OF THE MACHINE CA.: 1,8 T
DIMENSIONS OF THE MACHINE CA.: 3,70X1,75X1,95 M
SERIAL-NO: 112067




Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-make:    arburg
type:     420s 800-150 advance
control: selogica
year of construction: 2004 
working hours             55.000 h

***clamping unit***
closing force:                      800 kn / 80 to.
distance between tie bars: 420 x 420 mm
clamping plates:                 570 x 570 mm
opening stroke:                   450 mm
tool height:                          250 mm min.
distance between plates     max. 700 mm
ejector stroke:                      150 mm
ejector force:                        40 kn max

***injection unit.
screw diameter:                   25 mm
injection volume:                  54 ccm
injection weight:                    49 gr
injection pressure:                2500 bar

**electrics**
pump: 15 kw
heating: 8,4 kw+0,6 kw
installed capacity: 24,4 kw
back-up fuse: 80 a

***dimensions/weight***
 weight: 3,7 tons


***extras***
- handling interface
- choice switch
- advance edition

machine is available now  in our stock hannover/germany
free loaded or against freight refund free domicile
 MAKE: ARBURG TYPE: 420S 800-150 ADVANCE CONTROL: SELOGICA YEAR OF CONSTRUCTION: 2004 WORKING HOURS 55.000 H ***CLAMPING UNIT*** CLOSING FORCE: 800 KN / 80 TO. DISTANCE BETWEEN TIE BARS: 420 X 420 MM CLAMPING PLATES: 570 X 570 MM OPENING STROKE: 450 MM TOOL HEIGHT: 250 MM MIN. DISTANCE BETWEEN PLATES MAX. 700 MM EJECTOR STROKE: 150 MM EJECTOR FORCE: 40 KN MAX ***INJECTION UNIT. SCREW DIAMETER: 25 MM INJECTION VOLUME: 54 CCM INJECTION WEIGHT: 49 GR INJECTION PRESSURE: 2500 BAR **ELECTRICS** PUMP: 15 KW HEATING: 8,4 KW+0,6 KW INSTALLED CAPACITY: 24,4 KW BACK-UP FUSE: 80 A ***DIMENSIONS/WEIGHT*** WEIGHT: 3,7 TONS ***EXTRAS*** - HANDLING INTERFACE - CHOICE SWITCH - ADVANCE EDITION MACHINE IS AVAILABLE NOW IN OUR STOCK HANNOVER/GERMANY FREE LOADED OR AGAINST FREIGHT REFUND FREE DOMICILE
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Ubicación: Land-screw size: 15 mm<br/>injection shot weight in polysterol: 25 g/ps<br/>closing pressure: 250 kn<br/>opening stroke: 275 mm<br/>mould space: 200 mm<br/>daylight opening: 475 mm<br/>surface area: 346x346 mm<br/>capacity of ejector: 17 kn<br/>draw back pressure: 10 kn<br/>ejector path: 100 mm<br/>injection pressure: 2450 bar<br/>control: arburg <br/>type: multitronica <br/>total power requirement: 12 kw<br/>weight of the machine ca.: 1,62 t<br/>dimensions of the machine ca.: 3,3x1,7 m<br/><br/><br/><br/><br/> SCREW SIZE: 15 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 25 G/PS
CLOSING PRESSURE: 250 KN
OPENING STROKE: 275 MM
MOULD SPACE: 200 MM
DAYLIGHT OPENING: 475 MM
SURFACE AREA: 346X346 MM
CAPACITY OF EJECTOR: 17 KN
DRAW BACK PRESSURE: 10 KN
EJECTOR PATH: 100 MM
INJECTION PRESSURE: 2450 BAR
CONTROL: ARBURG
TYPE: MULTITRONICA
TOTAL POWER REQUIREMENT: 12 KW
WEIGHT OF THE MACHINE CA.: 1,62 T
DIMENSIONS OF THE MACHINE CA.: 3,3X1,7 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-make: arburg
type: 420s 800-675
control: selogica
year of construction: 1999
operating hours:  42239 h

note
new pump in 2017

*****clamping unit*********
closing force: 800 kn / 80 to.
distance between tie bars: 420 x 420 mm
clamping plates: 570 x 570
opening stroke: 450 mm
tool height: 250 mm min.
distance between plates max. 700 mm
ejector travel: 150 mm
ejector force: 40 kn max

*****injection unit.
screw diameter: 50 mm
injection volume: 353 ccm
injection weight: 323 gr
injection pressure: 2080 bar

****electrics******
pump: 22 kw
heating: 6 x 2,2 kw + 0,6 kw
installed capacity: 38,3kw
back-up fuse: 100 a

****general*******
 weight: 4,1 to


++++++extras+++++

- interface colouring devices

condition:
very good used condition, new pump in 2017
machine was test in full functional condition

-available now in our warehouse / hannover
- free loaded or free house against freight reimbursement
  MAKE: ARBURG TYPE: 420S 800-675 CONTROL: SELOGICA YEAR OF CONSTRUCTION: 1999 OPERATING HOURS: 42239 H NOTE NEW PUMP IN 2017 *****CLAMPING UNIT********* CLOSING FORCE: 800 KN / 80 TO. DISTANCE BETWEEN TIE BARS: 420 X 420 MM CLAMPING PLATES: 570 X 570 OPENING STROKE: 450 MM TOOL HEIGHT: 250 MM MIN. DISTANCE BETWEEN PLATES MAX. 700 MM EJECTOR TRAVEL: 150 MM EJECTOR FORCE: 40 KN MAX *****INJECTION UNIT. SCREW DIAMETER: 50 MM INJECTION VOLUME: 353 CCM INJECTION WEIGHT: 323 GR INJECTION PRESSURE: 2080 BAR ****ELECTRICS****** PUMP: 22 KW HEATING: 6 X 2,2 KW + 0,6 KW INSTALLED CAPACITY: 38,3KW BACK-UP FUSE: 100 A ****GENERAL******* WEIGHT: 4,1 TO ++++++EXTRAS+++++ - INTERFACE COLOURING DEVICES CONDITION: VERY GOOD USED CONDITION, NEW PUMP IN 2017 MACHINE WAS TEST IN FULL FUNCTIONAL CONDITION -AVAILABLE NOW IN OUR WAREHOUSE / HANNOVER - FREE LOADED OR FREE HOUSE AGAINST FREIGHT REIMBURSEMENT
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Ubicación: Land-screw size: 15 mm<br/>injection shot weight in polysterol: 25 g/ps<br/>closing pressure: 250 kn<br/>opening stroke: 275 mm<br/>mould space: 200 mm<br/>daylight opening: 475 mm<br/>surface area: 346x346 mm<br/>capacity of ejector: 17 kn<br/>draw back pressure: 10 kn<br/>ejector path: 100 mm<br/>injection pressure: 2450 bar<br/>control: arburg <br/>type: multitronica <br/>total power requirement: 12 kw<br/>weight of the machine ca.: 1,62 t<br/>dimensions of the machine ca.: 3,3x1,7 m<br/><br/><br/><br/><br/> SCREW SIZE: 15 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 25 G/PS
CLOSING PRESSURE: 250 KN
OPENING STROKE: 275 MM
MOULD SPACE: 200 MM
DAYLIGHT OPENING: 475 MM
SURFACE AREA: 346X346 MM
CAPACITY OF EJECTOR: 17 KN
DRAW BACK PRESSURE: 10 KN
EJECTOR PATH: 100 MM
INJECTION PRESSURE: 2450 BAR
CONTROL: ARBURG
TYPE: MULTITRONICA
TOTAL POWER REQUIREMENT: 12 KW
WEIGHT OF THE MACHINE CA.: 1,62 T
DIMENSIONS OF THE MACHINE CA.: 3,3X1,7 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 27.900 
Ubicación: Land-used injection moulding machine

manufacturer: arburg
type: 320c 500-170
year of construction 2006

control: selogica
operating hours: approx. 42,000 h

clamping unit
clamping force: 500 kn
distance between bars: 320 x 320 mm
mold mounting plates: 446 x 446
ejector stroke: 125 mm max. 
opening stroke: 350 mm
tool height: 200mm
distance between clamping plates: 550 mm (max.)

injection unit
screw diameter: 25 mm
injection volume: 59 ccm
injection weight: 54 gr/ps
injection pressure: 2500 bar 

extras 
interface handling, 
highly wear-resistant screw,
selecting unit
socketvert. 1 cee,1 schuko additional interface printer serial usb
compact flash interface for
record storage
operating authorization with chip card after euromap 65
4 free cooling circuits
equipment packages 1,2,3, 5,6,7


weight / dimensions
weight: 2300 kg  
dimensions 3,41 x 1,43 x 1,85 mtr (lxwxh) 

- immediately available from our warehouse in hanover free loaded or free house against freight refund

- function tested (guaranteed until first start-up)
 USED INJECTION MOULDING MACHINE MANUFACTURER: ARBURG TYPE: 320C 500-170 YEAR OF CONSTRUCTION 2006 CONTROL: SELOGICA OPERATING HOURS: APPROX. 42,000 H CLAMPING UNIT CLAMPING FORCE: 500 KN DISTANCE BETWEEN BARS: 320 X 320 MM MOLD MOUNTING PLATES: 446 X 446 EJECTOR STROKE: 125 MM MAX. OPENING STROKE: 350 MM TOOL HEIGHT: 200MM DISTANCE BETWEEN CLAMPING PLATES: 550 MM (MAX.) INJECTION UNIT SCREW DIAMETER: 25 MM INJECTION VOLUME: 59 CCM INJECTION WEIGHT: 54 GR/PS INJECTION PRESSURE: 2500 BAR EXTRAS INTERFACE HANDLING, HIGHLY WEAR-RESISTANT SCREW, SELECTING UNIT SOCKETVERT. 1 CEE,1 SCHUKO ADDITIONAL INTERFACE PRINTER SERIAL USB COMPACT FLASH INTERFACE FOR RECORD STORAGE OPERATING AUTHORIZATION WITH CHIP CARD AFTER EUROMAP 65 4 FREE COOLING CIRCUITS EQUIPMENT PACKAGES 1,2,3, 5,6,7 WEIGHT / DIMENSIONS WEIGHT: 2300 KG DIMENSIONS 3,41 X 1,43 X 1,85 MTR (LXWXH) - IMMEDIATELY AVAILABLE FROM OUR WAREHOUSE IN HANOVER FREE LOADED OR FREE HOUSE AGAINST FREIGHT REFUND - FUNCTION TESTED (GUARANTEED UNTIL FIRST START-UP)
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Ubicación: Land-screw size: mm<br/>injection shot weight in polysterol: g/ps<br/>closing pressure:2000 kn<br/>daylight:570 x 570 mm<br/>opening stroke:650 mm<br/>mould height - max./min.:500 mm  mm<br/>control:selogica <br/>daylight between platens - max.:1150 mm<br/>total power requirement:57,6  kw<br/>weight of the machine ca.:8,0 t<br/>dimensions of the machine ca.: m<br/><br/>the machine is equipped with horizontal injection unit and with a second injection unit in angular position  - lcd colour monitor, colour type  - selogica control unit - 1st injection unit (horizontal  2 colour)   screw diameter: 30 mm (highly wear resistant)   shot weight ps: 71 g - 2nd injection unit in angular position    screw diameter: 30 mm (highly wear resistant)   shot weight ps: 71 g equipment - advanced simultaneous fast movements with 3 pumps - technology step 2 servoregulated with 2 regulating pumps  - highly wear resistant plastification unit  - safety mould heating 16 a per heating circuit - electr. and hydr. drive  needle valve nozzle in the mould - min. mould opening increased to 500 mm - mould blow unit 1 with pressure reducer - 4 core pulls  - hydraulic accumulator - increased injection pressure - interface for robot - interface for tempering unit - interface for printer - interface for pc keyboard - 1 additional heating circuit for nozzle - 12 additional heating circuits mould - switch over to holding pressure k 1 - piezo charge amplifier - interface for dosing unit - interface for dosiing unit for injection aggregate 2 - interface vacuum control  - control vacuum - 6 free cooling circuits manual adjustable - arburg equipment packages no.: 1,2,3,5,6,7 - positon regulated screw for both injection units - special paintiing colour \ SCREW SIZE: MM
INJECTION SHOT WEIGHT IN POLYSTEROL: G/PS
CLOSING PRESSURE:2000 KN
DAYLIGHT:570 X 570 MM
OPENING STROKE:650 MM
MOULD HEIGHT - MAX./MIN.:500 MM MM
CONTROL:SELOGICA
DAYLIGHT BETWEEN PLATENS - MAX.:1150 MM
TOTAL POWER REQUIREMENT:57,6 KW
WEIGHT OF THE MACHINE CA.:8,0 T
DIMENSIONS OF THE MACHINE CA.: M

THE MACHINE IS EQUIPPED WITH HORIZONTAL INJECTION UNIT AND WITH A SECOND INJECTION UNIT IN ANGULAR POSITION - LCD COLOUR MONITOR, COLOUR TYPE - SELOGICA CONTROL UNIT - 1ST INJECTION UNIT (HORIZONTAL 2 COLOUR) SCREW DIAMETER: 30 MM (HIGHLY WEAR RESISTANT) SHOT WEIGHT PS: 71 G - 2ND INJECTION UNIT IN ANGULAR POSITION SCREW DIAMETER: 30 MM (HIGHLY WEAR RESISTANT) SHOT WEIGHT PS: 71 G EQUIPMENT - ADVANCED SIMULTANEOUS FAST MOVEMENTS WITH 3 PUMPS - TECHNOLOGY STEP 2 SERVOREGULATED WITH 2 REGULATING PUMPS - HIGHLY WEAR RESISTANT PLASTIFICATION UNIT - SAFETY MOULD HEATING 16 A PER HEATING CIRCUIT - ELECTR. AND HYDR. DRIVE NEEDLE VALVE NOZZLE IN THE MOULD - MIN. MOULD OPENING INCREASED TO 500 MM - MOULD BLOW UNIT 1 WITH PRESSURE REDUCER - 4 CORE PULLS - HYDRAULIC ACCUMULATOR - INCREASED INJECTION PRESSURE - INTERFACE FOR ROBOT - INTERFACE FOR TEMPERING UNIT - INTERFACE FOR PRINTER - INTERFACE FOR PC KEYBOARD - 1 ADDITIONAL HEATING CIRCUIT FOR NOZZLE - 12 ADDITIONAL HEATING CIRCUITS MOULD - SWITCH OVER TO HOLDING PRESSURE K 1 - PIEZO CHARGE AMPLIFIER - INTERFACE FOR DOSING UNIT - INTERFACE FOR DOSIING UNIT FOR INJECTION AGGREGATE 2 - INTERFACE VACUUM CONTROL - CONTROL VACUUM - 6 FREE COOLING CIRCUITS MANUAL ADJUSTABLE - ARBURG EQUIPMENT PACKAGES NO.: 1,2,3,5,6,7 - POSITON REGULATED SCREW FOR BOTH INJECTION UNITS - SPECIAL PAINTIING COLOUR \"LIGHT GREY\" - INKL. ROBOT WITTMANN TYPE W 633-0773, YEAR: 2003 - WITH SUBSTANTIAL SERIAL EQUIPMENT
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-it involves 350-100 an arburg 221 ks
machine is currently still in operation. 
defects: heating control to not work properly.
installed new control card 2013, for â?¬3.041,57 
 IT INVOLVES 350-100 AN ARBURG 221 KS MACHINE IS CURRENTLY STILL IN OPERATION. DEFECTS: HEATING CONTROL TO NOT WORK PROPERLY. INSTALLED NEW CONTROL CARD 2013, FOR &ACIRC;?&NOT;3.041,57
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-<br>clamping force: 0 t<br>shot weight: 0 g<br>screw: 0 mm<br>tie bars distance x: 0 mm<br>tie bars distance y: 0 mm<br>day light: 0 mm <br><br />
<br />
<br />
<br />
horizontal injection molding machine arburg type 221/175/350<br />
<br />
capacity 350 kn <br />
year of construction 1979 
CLAMPING FORCE: 0 T
SHOT WEIGHT: 0 G
SCREW: 0 MM
TIE BARS DISTANCE X: 0 MM
TIE BARS DISTANCE Y: 0 MM
DAY LIGHT: 0 MM




HORIZONTAL INJECTION MOLDING MACHINE ARBURG TYPE 221/175/350

CAPACITY 350 KN
YEAR OF CONSTRUCTION 1979&NBSP;
Vendedor: Retec Machines S.A.S
Año de construcción: usado
Ubicación: Land-make/model:  arburg 270 s 350-70

yom: 2008

ton: 35

dbtb: 270 x 270
MAKE/MODEL: ARBURG 270 S 350-70 YOM: 2008 TON: 35 DBTB: 270 X 270
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Ubicación: Land-<br>clamping force: 0 t<br>shot weight: 0 g<br>screw: 0 mm<br>tie bars distance x: 0 mm<br>tie bars distance y: 0 mm<br>day light: 0 mm <br><br />
<br />
<br />
horizontal injection molding machine arburg type 221e/221<br />
<br />
capacity 350 kn <br />
year of construction 1974 
CLAMPING FORCE: 0 T
SHOT WEIGHT: 0 G
SCREW: 0 MM
TIE BARS DISTANCE X: 0 MM
TIE BARS DISTANCE Y: 0 MM
DAY LIGHT: 0 MM



HORIZONTAL INJECTION MOLDING MACHINE ARBURG TYPE 221E/221

CAPACITY 350 KN
YEAR OF CONSTRUCTION 1974&NBSP;
Vendedor: Retec Machines S.A.S
Año de construcción: usado
Ubicación: Land-make/model: arburg 630 s  2500 - 1300 

yom: 2003

ton: 250

dbtb: 630 x 630 
MAKE/MODEL: ARBURG 630 S 2500 - 1300 YOM: 2003 TON: 250 DBTB: 630 X 630
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Ubicación: Land-make/model: arburg 470 a  alldrive 1000-400

yom: 2008

ton: 100

dbtb:470 x 470
MAKE/MODEL: ARBURG 470 A ALLDRIVE 1000-400 YOM: 2008 TON: 100 DBTB:470 X 470
Vendedor: D&M MACHINERY LTD
Año de construcción: usado
Ubicación: Land-machine specification

year: 2000 
control unit: selogica 

injection unit: .../150
screw diameter: 25 mm 
injection pressure: 2500 bar 
injection volume: 54 ccm 
shot capacity: 45 g 

clamping unit: 500/...
clamping force: 50 t 
platen size: 498 x 498 mm 
distance between tie bars: 320 x 320 mm 
mould height: 225 mm 
opening storke: 350 mm 
max.daylight: 575 mm 
ejector stroke: 125 mm 
drive power of the hydraulic pump: 15 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,70 x 1,60 x 2,10 m 
weight: 5.000 kg   MACHINE SPECIFICATION YEAR: 2000 CONTROL UNIT: SELOGICA INJECTION UNIT: .../150 SCREW DIAMETER: 25 MM INJECTION PRESSURE: 2500 BAR INJECTION VOLUME: 54 CCM SHOT CAPACITY: 45 G CLAMPING UNIT: 500/... CLAMPING FORCE: 50 T PLATEN SIZE: 498 X 498 MM DISTANCE BETWEEN TIE BARS: 320 X 320 MM MOULD HEIGHT: 225 MM OPENING STORKE: 350 MM MAX.DAYLIGHT: 575 MM EJECTOR STROKE: 125 MM DRIVE POWER OF THE HYDRAULIC PUMP: 15 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,70 X 1,60 X 2,10 M WEIGHT: 5.000 KG
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-arburg 200 tons injection, moulding machine. this machine will be delivered completly checked repaired and tested and can be shown under power.

technical details	
year of building	1999
clamping force	2.000 kn
travel opening	650 mm
min. mould hight	300 mm
daylight max	950 mm
distance between tie bars (h x v)	570x570 mm
platen size	795x795 mm
screw diameter	60 mm
injection volumen	508 cm3
shotweight	427 ps
injection pressure	1440 bar
working hours	64.612 pump
working hours	54.863 automatic ARBURG 200 TONS INJECTION, MOULDING MACHINE. THIS MACHINE WILL BE DELIVERED COMPLETLY CHECKED REPAIRED AND TESTED AND CAN BE SHOWN UNDER POWER. TECHNICAL DETAILS YEAR OF BUILDING 1999 CLAMPING FORCE 2.000 KN TRAVEL OPENING 650 MM MIN. MOULD HIGHT 300 MM DAYLIGHT MAX 950 MM DISTANCE BETWEEN TIE BARS (H X V) 570X570 MM PLATEN SIZE 795X795 MM SCREW DIAMETER 60 MM INJECTION VOLUMEN 508 CM3 SHOTWEIGHT 427 PS INJECTION PRESSURE 1440 BAR WORKING HOURS 64.612 PUMP WORKING HOURS 54.863 AUTOMATIC
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-arburg 520 c 2000-675 injection, moulding machine., year of building 2000, approx. 56.286 working hours. this machine will be delivered completly checked repaired and tested and can be shown under power. new screw and barrel.

technical details	
platen size	720 x 720 mm
distance between tie bars (h x v)	520 x 520 mm
travel opening	650 mm
min. mould hight	250 mm
daylight max	900 mm
screw diameter	55 mm
clamping force	2.000 kn
injection volumen	427 cm3
shotweight	360 ps
injection pressure	1720 bar
year of building	2000
working hours	56.286 ARBURG 520 C 2000-675 INJECTION, MOULDING MACHINE., YEAR OF BUILDING 2000, APPROX. 56.286 WORKING HOURS. THIS MACHINE WILL BE DELIVERED COMPLETLY CHECKED REPAIRED AND TESTED AND CAN BE SHOWN UNDER POWER. NEW SCREW AND BARREL. TECHNICAL DETAILS PLATEN SIZE 720 X 720 MM DISTANCE BETWEEN TIE BARS (H X V) 520 X 520 MM TRAVEL OPENING 650 MM MIN. MOULD HIGHT 250 MM DAYLIGHT MAX 900 MM SCREW DIAMETER 55 MM CLAMPING FORCE 2.000 KN INJECTION VOLUMEN 427 CM3 SHOTWEIGHT 360 PS INJECTION PRESSURE 1720 BAR YEAR OF BUILDING 2000 WORKING HOURS 56.286
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-arburg allrounder 221 k u (machine 90 â° swiveling!)
built in 2007
clamping force of 350 kn
snails ã? 25mm
control: selogica
dimensions: l = 2700 mm
b = 1400 mm
h = 2200 mm
weight: 1.2 t
facilities:
-u-version machine can complete 90 â°
be swiveled.
-2 x hydraulic core pulling
-pneumatic automatic doors
-water battery
-material hopper
-compl. 2. cylinder with ã? 20mm
hours of operation: ~ 31.000 h (pump) / ~ 23, 000 h (automatic mode)
condition: machine is operational,
production currently in demand in the 2 - / 3-layer operation. ARBURG ALLROUNDER 221 K U (MACHINE 90 &ACIRC;&DEG; SWIVELING!) BUILT IN 2007 CLAMPING FORCE OF 350 KN SNAILS &ATILDE;? 25MM CONTROL: SELOGICA DIMENSIONS: L = 2700 MM B = 1400 MM H = 2200 MM WEIGHT: 1.2 T FACILITIES: -U-VERSION MACHINE CAN COMPLETE 90 &ACIRC;&DEG; BE SWIVELED. -2 X HYDRAULIC CORE PULLING -PNEUMATIC AUTOMATIC DOORS -WATER BATTERY -MATERIAL HOPPER -COMPL. 2. CYLINDER WITH &ATILDE;? 20MM HOURS OF OPERATION: ~ 31.000 H (PUMP) / ~ 23, 000 H (AUTOMATIC MODE) CONDITION: MACHINE IS OPERATIONAL, PRODUCTION CURRENTLY IN DEMAND IN THE 2 - / 3-LAYER OPERATION.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 12.250 £
Ubicación: Land-category: injection moulding
id: 5237
manufacturer: arburg
model: 270s 350-60
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 35
screw diameter (mm): 22
max shot weight (ps) (g): 25
control system: selogica
lead time: 6 weeks from order
in production: yes
location: wellingborough, northamptonshire

arburg 270 350-60 s awaiting refurbishment at our works in wellingborough, northants.  the arburg machines with selogica controller are one of the most popular machines on the used market and arburg have done exceptionally well with the combination over the years.  the machines are well respected for their reliability and support from arburg.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

machines awaiting refurbishment can be reserved with a 10% deposit.  once a deposit has been placed, we prioritise the refurbishment of that machine and agree to a lead time.  once the machine is complete, it will be run with a tool and is an ideal opportunity for inspection by the purchaser.  CATEGORY: INJECTION MOULDING ID: 5237 MANUFACTURER: ARBURG MODEL: 270S 350-60 VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 35 SCREW DIAMETER (MM): 22 MAX SHOT WEIGHT (PS) (G): 25 CONTROL SYSTEM: SELOGICA LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: YES LOCATION: WELLINGBOROUGH, NORTHAMPTONSHIRE ARBURG 270 350-60 S AWAITING REFURBISHMENT AT OUR WORKS IN WELLINGBOROUGH, NORTHANTS. THE ARBURG MACHINES WITH SELOGICA CONTROLLER ARE ONE OF THE MOST POPULAR MACHINES ON THE USED MARKET AND ARBURG HAVE DONE EXCEPTIONALLY WELL WITH THE COMBINATION OVER THE YEARS. THE MACHINES ARE WELL RESPECTED FOR THEIR RELIABILITY AND SUPPORT FROM ARBURG. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A 10% DEPOSIT. ONCE A DEPOSIT HAS BEEN PLACED, WE PRIORITISE THE REFURBISHMENT OF THAT MACHINE AND AGREE TO A LEAD TIME. ONCE THE MACHINE IS COMPLETE, IT WILL BE RUN WITH A TOOL AND IS AN IDEAL OPPORTUNITY FOR INSPECTION BY THE PURCHASER.
Vendedor: STVmachinery
Año de construcción: usado
Precio: 12.250 £
Ubicación: Land-category: injection moulding
id: 5235
manufacturer: arburg
model: 270s 350-60
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 35
screw diameter (mm): 22
max shot weight (ps) (g): 25
control system: selogica
lead time: 6 weeks from order
in production: yes
location: wellingborough, northamptonshire

arburg 270 350-60 s awaiting refurbishment at our works in wellingborough, northants. the arburg machines with selogica controller are one of the most popular machines on the used market and arburg have done exceptionally well with the combination over the years.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

machines awaiting refurbishment can be reserved with a 10% deposit.  once a deposit has been placed, we prioritise the refurbishment of that machine and agree to a lead time.  once the machine is complete, it will be run with a tool and is an ideal opportunity for inspection by the purchaser.   CATEGORY: INJECTION MOULDING ID: 5235 MANUFACTURER: ARBURG MODEL: 270S 350-60 VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 35 SCREW DIAMETER (MM): 22 MAX SHOT WEIGHT (PS) (G): 25 CONTROL SYSTEM: SELOGICA LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: YES LOCATION: WELLINGBOROUGH, NORTHAMPTONSHIRE ARBURG 270 350-60 S AWAITING REFURBISHMENT AT OUR WORKS IN WELLINGBOROUGH, NORTHANTS. THE ARBURG MACHINES WITH SELOGICA CONTROLLER ARE ONE OF THE MOST POPULAR MACHINES ON THE USED MARKET AND ARBURG HAVE DONE EXCEPTIONALLY WELL WITH THE COMBINATION OVER THE YEARS. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A 10% DEPOSIT. ONCE A DEPOSIT HAS BEEN PLACED, WE PRIORITISE THE REFURBISHMENT OF THAT MACHINE AND AGREE TO A LEAD TIME. ONCE THE MACHINE IS COMPLETE, IT WILL BE RUN WITH A TOOL AND IS AN IDEAL OPPORTUNITY FOR INSPECTION BY THE PURCHASER.
Vendedor: STVmachinery
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)