1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF WäLZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO HöHENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH «FACHBELEGT». AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES «TIP OPERATION/AUTOMATIC MODE», THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR¬ -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 26.500 EU€
Ubicación: Land-agfa ctp system is a set of printing devices for making printing forms. the devices allow the use of ctp technology, which consists in direct exposure of offset plates or flexographic plates. this method of printing forms ensures high quality and reduces the preparation time of the printing process. AGFA CTP SYSTEM IS A SET OF PRINTING DEVICES FOR MAKING PRINTING FORMS. THE DEVICES ALLOW THE USE OF CTP TECHNOLOGY, WHICH CONSISTS IN DIRECT EXPOSURE OF OFFSET PLATES OR FLEXOGRAPHIC PLATES. THIS METHOD OF PRINTING FORMS ENSURES HIGH QUALITY AND REDUCES THE PREPARATION TIME OF THE PRINTING PROCESS.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 150 €
Ubicación: Land-approximately 59 units commissioning trolleys, table car, wanzl - used -:
 
price at time of purchase of the total: â?¬8.850.-(net) 150.-â?¬/ piece =, dismantled and loaded!
 
purchase small subsets: price per piece (net, dismantled and loaded): â?¬185
 
internal name: picking trolley food
 
manufacturer: wanzl
type: picking trolley kt 3 / 1297
year of constr.: 2016
capacity: 300kg
the floor load-bearing capacity: 75kg
external dimensions: 1893(1250) x 625 x 1233 mm
4 swivel castors + 5th wheel, rubber tread
floor height-adjustable
optional extras:
comfort handle
extra storage basket
with 5th role (mechanical design, facilitates steering and maneuvering of the container)
new price: over 400. â?¬
condition: good
available: available now
location: room berlin APPROXIMATELY 59 UNITS COMMISSIONING TROLLEYS, TABLE CAR, WANZL - USED -: PRICE AT TIME OF PURCHASE OF THE TOTAL: Â?¬8.850.-(NET) 150.-Â?¬/ PIECE =, DISMANTLED AND LOADED! PURCHASE SMALL SUBSETS: PRICE PER PIECE (NET, DISMANTLED AND LOADED): Â?¬185 INTERNAL NAME: PICKING TROLLEY FOOD MANUFACTURER: WANZL TYPE: PICKING TROLLEY KT 3 / 1297 YEAR OF CONSTR.: 2016 CAPACITY: 300KG THE FLOOR LOAD-BEARING CAPACITY: 75KG EXTERNAL DIMENSIONS: 1893(1250) X 625 X 1233 MM 4 SWIVEL CASTORS + 5TH WHEEL, RUBBER TREAD FLOOR HEIGHT-ADJUSTABLE OPTIONAL EXTRAS: COMFORT HANDLE EXTRA STORAGE BASKET WITH 5TH ROLE (MECHANICAL DESIGN, FACILITATES STEERING AND MANEUVERING OF THE CONTAINER) NEW PRICE: OVER 400. Â?¬ CONDITION: GOOD AVAILABLE: AVAILABLE NOW LOCATION: ROOM BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 7.800 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-year 1981, with various removable wheels.
max frã¤sbarer workpiece diameter. 40 mm (46 mm)
max workpiece length 75 mm (110 mm)
max can be milled workpiece length 40 mm
max frã¤sbares module 1
maximum cutter diameter. 32 mm (40 mm)
max milling width 15 mm
shifting 12 mm
spindle tiltable +-6â°
milling cutter speeds of 400-4800 rpm.
radial & axial feed rates of 0-4 mm / sec.
tailstock spindle stroke 30 mm (60 mm)
tailstock moved 61 mm
weight 800 kg
accessories: coolant system, various recordings, feeder rail. YEAR 1981, WITH VARIOUS REMOVABLE WHEELS. MAX FRäSBARER WORKPIECE DIAMETER. 40 MM (46 MM) MAX WORKPIECE LENGTH 75 MM (110 MM) MAX CAN BE MILLED WORKPIECE LENGTH 40 MM MAX FRäSBARES MODULE 1 MAXIMUM CUTTER DIAMETER. 32 MM (40 MM) MAX MILLING WIDTH 15 MM SHIFTING 12 MM SPINDLE TILTABLE +-6° MILLING CUTTER SPEEDS OF 400-4800 RPM. RADIAL & AXIAL FEED RATES OF 0-4 MM / SEC. TAILSTOCK SPINDLE STROKE 30 MM (60 MM) TAILSTOCK MOVED 61 MM WEIGHT 800 KG ACCESSORIES: COOLANT SYSTEM, VARIOUS RECORDINGS, FEEDER RAIL.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, type al 250 2d, no rvnl136780, new 2014, rotary valve , house material stainless steel , rotor material stainless steel , rotor diameter 250mm, rotor width 310mm, inlet dia.250mm, inlet flange sizes 406x250 stc.350, outlet dia.250mm, outlet flange sizes 406x250 stc.350, daylight 450mm, with motor 1.1 kw, 219-241/380-420volt, rotor speed 25 rpm, outer laying bearings , air purged sealings , capacity 19 ltr/rev, floorspace 1.2x0.6 m, total height 0.45 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, TYPE AL 250 2D, NO RVNL136780, NEW 2014, ROTARY VALVE , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 250MM, ROTOR WIDTH 310MM, INLET DIA.250MM, INLET FLANGE SIZES 406X250 STC.350, OUTLET DIA.250MM, OUTLET FLANGE SIZES 406X250 STC.350, DAYLIGHT 450MM, WITH MOTOR 1.1 KW, 219-241/380-420VOLT, ROTOR SPEED 25 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 19 LTR/REV, FLOORSPACE 1.2X0.6 M, TOTAL HEIGHT 0.45 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 904998
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d
year of manufacture: 2007
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 72 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
6 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
additional control panel for managing tool
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904998 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2007 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 72 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 6 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK ADDITIONAL CONTROL PANEL FOR MANAGING TOOL MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, no 148765/2a 20dv ax, rotary valve for air transport , house material stainless steel , rotor material stainless steel , rotor diameter dia.175mm, rotor width 200mm, inlet dia.180, inlet flange sizes 315x175 stc.270mm, outlet dia.65mm, outlet flange sizes 140x65 stc.120mm, daylight 340mm, with motor 0.75 kw, 230/400volt, rotor speed 48 rpm, outer laying bearings , air purged sealings , capacity 5.5 ltr/rev, floorspace 1.1x0.35 m, total height 0.35 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, NO 148765/2A 20DV AX, ROTARY VALVE FOR AIR TRANSPORT , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER DIA.175MM, ROTOR WIDTH 200MM, INLET DIA.180, INLET FLANGE SIZES 315X175 STC.270MM, OUTLET DIA.65MM, OUTLET FLANGE SIZES 140X65 STC.120MM, DAYLIGHT 340MM, WITH MOTOR 0.75 KW, 230/400VOLT, ROTOR SPEED 48 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 5.5 LTR/REV, FLOORSPACE 1.1X0.35 M, TOTAL HEIGHT 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 905001
number: 1 pcs.
manufacturer: gildemeister
type: ctv 250
control: siemens 840 d slimline
year of constr.: 2017
state of preservation: second-hand machine
machine a (hours): 7,600
spindle a (hours): 4,900

description

turning

axes x/y/z/c
maximum turning length 200 mm
maximum swing over bed cover 350 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 25 kw
maximum torque of main spindle in ed 10-40 / 100% 280 nm
main spindle spindle passage 57 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
axes on the main spindle unit x/z/c
travel in x/y/z main spindle unit 700 /-/ 300 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 40 m / min
full cylinder on the main spindle
coolant through the spindle

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
axes in the turret y
travel in x/y/z - 90 / - mm
tool mounting plate for additional block tool holder

more facilities

workpiece measuring probes (preparation)
splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
coolant gun
reversible double cartridge filter
high pressure pump 12 bar
rotating part memory band
machine status light

accessories

pcs. 3 - jaw chuck schunk ncd 215-66 mm

general technical data

floor space of throughout the facility lxwxh) approx. 2800 x 2770 x 2650 mm
machine weight 6200 kg

comment

left model!
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905001 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTV 250 CONTROL: SIEMENS 840 D SLIMLINE YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 7,600 SPINDLE A (HOURS): 4,900 DESCRIPTION TURNING AXES X/Y/Z/C MAXIMUM TURNING LENGTH 200 MM MAXIMUM SWING OVER BED COVER 350 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 280 NM MAIN SPINDLE SPINDLE PASSAGE 57 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 AXES ON THE MAIN SPINDLE UNIT X/Z/C TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 700 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 40 M / MIN FULL CYLINDER ON THE MAIN SPINDLE COOLANT THROUGH THE SPINDLE GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET AXES IN THE TURRET Y TRAVEL IN X/Y/Z - 90 / - MM TOOL MOUNTING PLATE FOR ADDITIONAL BLOCK TOOL HOLDER MORE FACILITIES WORKPIECE MEASURING PROBES (PREPARATION) SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR COOLANT GUN REVERSIBLE DOUBLE CARTRIDGE FILTER HIGH PRESSURE PUMP 12 BAR ROTATING PART MEMORY BAND MACHINE STATUS LIGHT ACCESSORIES PCS. 3 - JAW CHUCK SCHUNK NCD 215-66 MM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 2800 X 2770 X 2650 MM MACHINE WEIGHT 6200 KG COMMENT LEFT MODEL! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, no 148765/2a 20dv ax, rotary valve for air transport , house material stainless steel , rotor material stainless steel , rotor diameter dia.175mm, rotor width 200mm, inlet dia.180mm, inlet flange sizes 315x175 stc,270mm, outlet dia.65mm, outlet flange sizes 140x65 stc.120mm, daylight 340mm, with motor 0.75 kw, 230/400volt, rotor speed 48 rpm, outer laying bearings , air purged sealings , capacity 5.5 ltr/rev, floorspace 1.1x0.35 m, total height 0.35 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, NO 148765/2A 20DV AX, ROTARY VALVE FOR AIR TRANSPORT , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER DIA.175MM, ROTOR WIDTH 200MM, INLET DIA.180MM, INLET FLANGE SIZES 315X175 STC,270MM, OUTLET DIA.65MM, OUTLET FLANGE SIZES 140X65 STC.120MM, DAYLIGHT 340MM, WITH MOTOR 0.75 KW, 230/400VOLT, ROTOR SPEED 48 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 5.5 LTR/REV, FLOORSPACE 1.1X0.35 M, TOTAL HEIGHT 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 905002
number: 1 pcs.
manufacturer: gildemeister
type: ctv 250
control: siemens 840 d slimline
year of constr.: 2017
state of preservation: second-hand machine
machine a (hours): 6,300
spindle a (hours): 4,400

description

turning

axes x/z/c
maximum turning length 200 mm
maximum swing over bed cover 350 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 25 kw
maximum torque of main spindle in ed 10-40 / 100% 280 nm
main spindle spindle passage 57 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
axes on the main spindle unit x/z/c
travel in x/y/z main spindle unit 700 /-/ 300 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 40 m / min
full cylinder on the main spindle
coolant through the spindle
pneumatic work piece control

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
tool mounting plate for additional block tool holder

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
coolant gun
reversible double cartridge filter
high pressure pump 12 bar
rotating part memory band
interface for automatic loading using bela de portal or robot
machine status light

accessories

pcs. 3 - jaw chuck schunk ncd 215-66 mm

general technical data

floor space of throughout the facility lxwxh) approx. 2800 x 2770 x 2650 mm
machine weight 6200 kg

comment

right model!
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905002 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTV 250 CONTROL: SIEMENS 840 D SLIMLINE YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 6,300 SPINDLE A (HOURS): 4,400 DESCRIPTION TURNING AXES X/Z/C MAXIMUM TURNING LENGTH 200 MM MAXIMUM SWING OVER BED COVER 350 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 280 NM MAIN SPINDLE SPINDLE PASSAGE 57 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 AXES ON THE MAIN SPINDLE UNIT X/Z/C TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 700 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 40 M / MIN FULL CYLINDER ON THE MAIN SPINDLE COOLANT THROUGH THE SPINDLE PNEUMATIC WORK PIECE CONTROL GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET TOOL MOUNTING PLATE FOR ADDITIONAL BLOCK TOOL HOLDER MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR COOLANT GUN REVERSIBLE DOUBLE CARTRIDGE FILTER HIGH PRESSURE PUMP 12 BAR ROTATING PART MEMORY BAND INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MACHINE STATUS LIGHT ACCESSORIES PCS. 3 - JAW CHUCK SCHUNK NCD 215-66 MM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 2800 X 2770 X 2650 MM MACHINE WEIGHT 6200 KG COMMENT RIGHT MODEL! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, no 148765/2a 20dv ax, rotary valve for air transport , house material stainless steel , rotor material stainless steel , rotor diameter dia.175mm, rotor width 200mm, inlet dia.180mm, inlet flange sizes 315x175 stc.270mm, outlet dia.65mm, outlet flange sizes 140x65 stc.120mm, daylight 340mm, with motor 0.75 kw, 230/400volt, rotor speed 48 rpm, outer laying bearings , air purged sealings , capacity 5.5 ltr/rev, floorspace 1.1x0.35 m, total height 0.35 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, NO 148765/2A 20DV AX, ROTARY VALVE FOR AIR TRANSPORT , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER DIA.175MM, ROTOR WIDTH 200MM, INLET DIA.180MM, INLET FLANGE SIZES 315X175 STC.270MM, OUTLET DIA.65MM, OUTLET FLANGE SIZES 140X65 STC.120MM, DAYLIGHT 340MM, WITH MOTOR 0.75 KW, 230/400VOLT, ROTOR SPEED 48 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 5.5 LTR/REV, FLOORSPACE 1.1X0.35 M, TOTAL HEIGHT 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 905003
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d
year of construction: 2010
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 36 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
6 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905003 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2010 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 36 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 6 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-make flottweg gmbh vilsbiburg (de), type z 73, no 910670, decanter , material stainless steel , screw diameter +/- 720mm, screw length 3100mm, inlet dia.100mm, motor tromel 45 kw, 400 volt, with variable speed drive , hydraulic drive , with hydraulic unit , motor 22 kw, 400 volt,, max. rotor speed 2340 rpm, floorspace 5,0x2,5 m, weight 1000kgdecanterscentrifuges > decanters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE FLOTTWEG GMBH VILSBIBURG (DE), TYPE Z 73, NO 910670, DECANTER , MATERIAL STAINLESS STEEL , SCREW DIAMETER +/- 720MM, SCREW LENGTH 3100MM, INLET DIA.100MM, MOTOR TROMEL 45 KW, 400 VOLT, WITH VARIABLE SPEED DRIVE , HYDRAULIC DRIVE , WITH HYDRAULIC UNIT , MOTOR 22 KW, 400 VOLT,, MAX. ROTOR SPEED 2340 RPM, FLOORSPACE 5,0X2,5 M, WEIGHT 1000KGDECANTERSCENTRIFUGES > DECANTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 905004
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d
year of manufacture: 2009
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 36 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
6 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
additional control panel for managing tool
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905004 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2009 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 36 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 6 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK ADDITIONAL CONTROL PANEL FOR MANAGING TOOL MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-make flottweg, type z73-4 /451, no 910669, decanter , material stainless steel , screw diameter +/- 720mm, screw length 3100mm, inlet 100mm, motor trommel 45 kw, 400 volt, with variable speed drive , hydraulic drive , with hydraulic unit , motor schroef 22kw, 400 volt, max. rotor speed 2340 rpm, floorspace 5,0x2,5 m, weight 10000kgdecanterscentrifuges > decanters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE FLOTTWEG, TYPE Z73-4 /451, NO 910669, DECANTER , MATERIAL STAINLESS STEEL , SCREW DIAMETER +/- 720MM, SCREW LENGTH 3100MM, INLET 100MM, MOTOR TROMMEL 45 KW, 400 VOLT, WITH VARIABLE SPEED DRIVE , HYDRAULIC DRIVE , WITH HYDRAULIC UNIT , MOTOR SCHROEF 22KW, 400 VOLT, MAX. ROTOR SPEED 2340 RPM, FLOORSPACE 5,0X2,5 M, WEIGHT 10000KGDECANTERSCENTRIFUGES > DECANTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vehicle identification no.: 15v942458, serial no.: 942458, built in 2016, bale number: unknown, standard, variable bale diameter from 1.00 to 1.50 m, comments to the state: gall on left panel, middle and upper area with paint damage. wear all-round device, various abrasions and paint damage is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. VEHICLE IDENTIFICATION NO.: 15V942458, SERIAL NO.: 942458, BUILT IN 2016, BALE NUMBER: UNKNOWN, STANDARD, VARIABLE BALE DIAMETER FROM 1.00 TO 1.50 M, COMMENTS TO THE STATE: GALL ON LEFT PANEL, MIDDLE AND UPPER AREA WITH PAINT DAMAGE. WEAR ALL-ROUND DEVICE, VARIOUS ABRASIONS AND PAINT DAMAGE IS POINTED OUT EXPLICITLY THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION.
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-make unknown, vessel dia. 400x500mm, extra specifications equipped with paddle stirrer, motor 0,11 kw, 220/380 volt variable speed drive, dim. 0,7x0,4 m, height 0,8 m , mixer stirring vessel for granulate (1x), material stainless steel , inlet 2x dia. 100mm, with switch, capacity 50 ltr, outlet 150x120mm (sliding valve)miscellaneous mixersmiscellaneous > miscellaneous mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, VESSEL DIA. 400X500MM, EXTRA SPECIFICATIONS EQUIPPED WITH PADDLE STIRRER, MOTOR 0,11 KW, 220/380 VOLT VARIABLE SPEED DRIVE, DIM. 0,7X0,4 M, HEIGHT 0,8 M , MIXER STIRRING VESSEL FOR GRANULATE (1X), MATERIAL STAINLESS STEEL , INLET 2X DIA. 100MM, WITH SWITCH, CAPACITY 50 LTR, OUTLET 150X120MM (SLIDING VALVE)MISCELLANEOUS MIXERSMISCELLANEOUS > MISCELLANEOUS MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 905006
number: 1 pcs.
manufacturer: stama
type: mc 531 / s
control: fanuc 18i m
year of construction: 2001
state of preservation: second-hand machine
stories about: 1 layers

description

milling

travel in x 1600 mm
travel in y 400 mm
travel in z 350 mm
maximum rapid traverse in x/y/z 45/45/45 m / min
maximum feed speed in x/y/z 10/10/10 m / min
maximum acceleration in x/y/z 3/7/12 m / s2
feed force in the x/y/z 7000/7000/12000 n
direct measuring system x/y/z
tool holder hsk 63
maximum speed milling spindle 9000 1/min
maximum power with ed 10-40 / 100% 48/14 kw
maximum torque at ed 10-40 / 100% 154/45 nm
spindle diameter in front bearing 65 mm
chain-type tool magazine 42 stations
max tool diameter 88 mm
max tool diameter when free neighbouring seats 125 mm
maximum tool length 250 mm
maximum tool weight 5 kg
exciting to chip time 3.3 s
machine table 2100 ã? 430 mm
3x14h12 (din 650) t slot table

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
partition for shuttle machining
chip conveyor
internal coolant supply
coolant gun
coolant system with paper band filter
high pressure pump 20 bar
automatic central oil lubrication

accessories

2 pcs. rotary table controlled by nc (horizontal axis)

general technical data

total power consumption 46 kva
weight 8500 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905006 NUMBER: 1 PCS. MANUFACTURER: STAMA TYPE: MC 531 / S CONTROL: FANUC 18I M YEAR OF CONSTRUCTION: 2001 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 1 LAYERS DESCRIPTION MILLING TRAVEL IN X 1600 MM TRAVEL IN Y 400 MM TRAVEL IN Z 350 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 45/45/45 M / MIN MAXIMUM FEED SPEED IN X/Y/Z 10/10/10 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 3/7/12 M / S2 FEED FORCE IN THE X/Y/Z 7000/7000/12000 N DIRECT MEASURING SYSTEM X/Y/Z TOOL HOLDER HSK 63 MAXIMUM SPEED MILLING SPINDLE 9000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 48/14 KW MAXIMUM TORQUE AT ED 10-40 / 100% 154/45 NM SPINDLE DIAMETER IN FRONT BEARING 65 MM CHAIN-TYPE TOOL MAGAZINE 42 STATIONS MAX TOOL DIAMETER 88 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 125 MM MAXIMUM TOOL LENGTH 250 MM MAXIMUM TOOL WEIGHT 5 KG EXCITING TO CHIP TIME 3.3 S MACHINE TABLE 2100 Ã? 430 MM 3X14H12 (DIN 650) T SLOT TABLE MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA PARTITION FOR SHUTTLE MACHINING CHIP CONVEYOR INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 20 BAR AUTOMATIC CENTRAL OIL LUBRICATION ACCESSORIES 2 PCS. ROTARY TABLE CONTROLLED BY NC (HORIZONTAL AXIS) GENERAL TECHNICAL DATA TOTAL POWER CONSUMPTION 46 KVA WEIGHT 8500 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-dpx offers a variety of synchronization panels able to share the load of multiple generating sets., all options are possible., for example these pictures are for synchronizing 1x 450 kva and 1x 700 kva., but it is also possible to connect 3, 4, 5 ,6 or even more gensets of all power outputs. DPX OFFERS A VARIETY OF SYNCHRONIZATION PANELS ABLE TO SHARE THE LOAD OF MULTIPLE GENERATING SETS., ALL OPTIONS ARE POSSIBLE., FOR EXAMPLE THESE PICTURES ARE FOR SYNCHRONIZING 1X 450 KVA AND 1X 700 KVA., BUT IT IS ALSO POSSIBLE TO CONNECT 3, 4, 5 ,6 OR EVEN MORE GENSETS OF ALL POWER OUTPUTS.
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-general

project no.: 905007
number: 1 pcs.
manufacturer: gildemeister
type: twin 65 rg2
control: siemens 840 d powerline
year of construction: 2002
state of preservation: second-hand machine
machine a (hours): 69.200
spindle a (hours): 34.100

description

turning

maximum turning diameter 200 mm
maximum swing over bed cover 250 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 37/25 kw
maximum torque of main spindle in ed 10-40 / 100% 390/270 nm
main spindle spindle passage 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
hollow clamping cylinder to the main spindle
maximum speed 5000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 37/25 kw
max torque spindle in ed 10-40 / 100% 390/270 nm
spindle passage sub-spindle 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size counter spindle 170 h 5
tailstock to counter spindle unit in the x direction of movable
tailstock quill stroke 300 mm
tailstock quill printing 600 dan

turret top
number of stations of which powered 12/12
tool holder in the turret vdi 30
axis in the x/y/z/w revolver

gun down
number of stations of which powered 12/12
tool holder in the turret vdi 30
the turret of x/z axes
maximum rapid traverse in x/y/z 30 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder

general technical data

machine dimensions (lxwxh) approx. 4940 x 3000 x 2488 mm
machine weight 10000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905007 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: TWIN 65 RG2 CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2002 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 69.200 SPINDLE A (HOURS): 34.100 DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 200 MM MAXIMUM SWING OVER BED COVER 250 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 37/25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 390/270 NM MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED 5000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 37/25 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 390/270 NM SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE COUNTER SPINDLE 170 H 5 TAILSTOCK TO COUNTER SPINDLE UNIT IN THE X DIRECTION OF MOVABLE TAILSTOCK QUILL STROKE 300 MM TAILSTOCK QUILL PRINTING 600 DAN TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 AXIS IN THE X/Y/Z/W REVOLVER GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 4940 X 3000 X 2488 MM MACHINE WEIGHT 10000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-last off code: dl-367dr registration: 25.04.2014 elapsed. hours of operation: 500,6 performance: 74, 9kw displacement: 4. 400ccm test badge: 4/2017 drive type: diesel maximum speed: motornr.: perkins 4-cylinder, turbo-diesel 4.4 l type, variant, version: t-l1/t1 003sp / - fin: 10stg00495 equity / total weight: 3.843/6.000kg 
facilities: 4 course, div. control panels, air conditioning, front and rear license launcher, additional lighting, tray plateau, div. storage compartments, front hydraulic lesnik prednja hidravlika shl 24, year 2014, powershiftgetriebe with load speed, power shuttle on the steering wheel is switchable, 32/32-speed transmission 3 dw rule hydraulic control units in the rear, joystick, rear pto with 540/750/1,000 rpm, ehr with external buttons, pin wave management, all wheel management with steering angle sensors, comfort seat, air conditioning, sunroof, 2 pcs. working lights front, 2 pcs. working light rear, 2-circuit compressed air brake system, mounting air, tow bar adjustable tires: rear galaxy 480/70 r34, front: galaxy 380/70 r24 documentation: licence of types of available key: 1 comments to the condition: expressly stated, that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. 
system number: LAST OFF CODE: DL-367DR REGISTRATION: 25.04.2014 ELAPSED. HOURS OF OPERATION: 500,6 PERFORMANCE: 74, 9KW DISPLACEMENT: 4. 400CCM TEST BADGE: 4/2017 DRIVE TYPE: DIESEL MAXIMUM SPEED: MOTORNR.: PERKINS 4-CYLINDER, TURBO-DIESEL 4.4 L TYPE, VARIANT, VERSION: T-L1/T1 003SP / - FIN: 10STG00495 EQUITY / TOTAL WEIGHT: 3.843/6.000KG FACILITIES: 4 COURSE, DIV. CONTROL PANELS, AIR CONDITIONING, FRONT AND REAR LICENSE LAUNCHER, ADDITIONAL LIGHTING, TRAY PLATEAU, DIV. STORAGE COMPARTMENTS, FRONT HYDRAULIC LESNIK PREDNJA HIDRAVLIKA SHL 24, YEAR 2014, POWERSHIFTGETRIEBE WITH LOAD SPEED, POWER SHUTTLE ON THE STEERING WHEEL IS SWITCHABLE, 32/32-SPEED TRANSMISSION 3 DW RULE HYDRAULIC CONTROL UNITS IN THE REAR, JOYSTICK, REAR PTO WITH 540/750/1,000 RPM, EHR WITH EXTERNAL BUTTONS, PIN WAVE MANAGEMENT, ALL WHEEL MANAGEMENT WITH STEERING ANGLE SENSORS, COMFORT SEAT, AIR CONDITIONING, SUNROOF, 2 PCS. WORKING LIGHTS FRONT, 2 PCS. WORKING LIGHT REAR, 2-CIRCUIT COMPRESSED AIR BRAKE SYSTEM, MOUNTING AIR, TOW BAR ADJUSTABLE TIRES: REAR GALAXY 480/70 R34, FRONT: GALAXY 380/70 R24 DOCUMENTATION: LICENCE OF TYPES OF AVAILABLE KEY: 1 COMMENTS TO THE CONDITION: EXPRESSLY STATED, THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION. SYSTEM NUMBER:
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-passage width:  mm<br/>working heigth:  mm<br/>--------------------------------------------------:  <br/>electrical specifications:  <br/>- mains voltage:    575 v<br/>- mains frequency:     60 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:  11125 mm<br/>- space requirements -front/back-:   1981 mm<br/>- total height:   2260 mm<br/>material handling:<br/>+ flat wire belt conveyor system<br/>+ variable speed with max 25 fpm<br/><br/>pumps: <br/>+ 3 embra centrifugal pumps 130gpm/30psi/5hp<br/>+ 1 embra centrifugal pump 100gpm/30psi/5hp<br/><br/>operating temperatur: <br/>+ wash - 170 degrees fahrenheit<br/>+ rinse - 170 degrees fahrenheit, 3 rinse stations<br/>+ blow off - 250 degrees fahrenheit<br/><br/>heat source: electric<br/>filter: single canister bag filters<br/>skimmer: skimmer belt oil removal system with timer<br/><br/><br/><br/><br/> PASSAGE WIDTH: MM
WORKING HEIGTH: MM
--------------------------------------------------:
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 575 V
- MAINS FREQUENCY: 60 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 11125 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 1981 MM
- TOTAL HEIGHT: 2260 MM
MATERIAL HANDLING:
+ FLAT WIRE BELT CONVEYOR SYSTEM
+ VARIABLE SPEED WITH MAX 25 FPM

PUMPS:
+ 3 EMBRA CENTRIFUGAL PUMPS 130GPM/30PSI/5HP
+ 1 EMBRA CENTRIFUGAL PUMP 100GPM/30PSI/5HP

OPERATING TEMPERATUR:
+ WASH - 170 DEGREES FAHRENHEIT
+ RINSE - 170 DEGREES FAHRENHEIT, 3 RINSE STATIONS
+ BLOW OFF - 250 DEGREES FAHRENHEIT

HEAT SOURCE: ELECTRIC
FILTER: SINGLE CANISTER BAG FILTERS
SKIMMER: SKIMMER BELT OIL REMOVAL SYSTEM WITH TIMER




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 8.100 €
Ubicación: Land-thread cutting device freischneiden device drilling depth shut off programmable drilling depth and speed display - digital thread cutter m24 (gradient-dependent) variable speed 125-2000 1 / min drilling capacity 25/30 mm spindle mk 3 drilling depth	125 mm projection of 280 mm-usable desk space (pivoting) 420 x 340 mm
feed 0-300 mm / min stepless adjustable anvil with rack machines dimensions (w x d x h) 520 x 820 x 1900 mm motor three-phase 400 v pole changing bar 1.5 / 2 kw weight 300 kg including drilling package, which includes: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and chip fracture module 690 eur delivery: free house including packaging not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN DEVICE DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTER M24 (GRADIENT-DEPENDENT) VARIABLE SPEED 125-2000 1 / MIN DRILLING CAPACITY 25/30 MM SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION OF 280 MM-USABLE DESK SPACE (PIVOTING) 420 X 340 MM FEED 0-300 MM / MIN STEPLESS ADJUSTABLE ANVIL WITH RACK MACHINES DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1.5 / 2 KW WEIGHT 300 KG INCLUDING DRILLING PACKAGE, WHICH INCLUDES: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND CHIP FRACTURE MODULE 690 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 500 mm<br/>description: 1x 45 degree mule, various milling blades WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 500 MM
DESCRIPTION: 1X 45 DEGREE MULE, VARIOUS MILLING BLADES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 7.990 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutter m20 (depending on elevation)
variable speed of 125-4000 u/mon in two stages, stage change of belt apportionment.
drilling capacity 25/30 mm
spindle mk 3
drilling depth 125 mm
projection 280 mm
usable surface (pivoting) 420 x 340 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 520 x 820 x 1900 mm
motor three-phase 400 v pole changing bar 0.9 / 1.45 kw
weight 300 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

option: spindle stop and chip fracture module 690 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *.
 THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTER M20 (DEPENDING ON ELEVATION) VARIABLE SPEED OF 125-4000 U/MON IN TWO STAGES, STAGE CHANGE OF BELT APPORTIONMENT. DRILLING CAPACITY 25/30 MM SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION 280 MM USABLE SURFACE (PIVOTING) 420 X 340 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 0.9 / 1.45 KW WEIGHT 300 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND CHIP FRACTURE MODULE 690 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 450 x 375 x 125 mm<br/>description: table surface 400 x 300 mm, 90 degrees tiltable, with 3 t-grooves pitch 80 mm t = 12 WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 450 X 375 X 125 MM
DESCRIPTION: TABLE SURFACE 400 X 300 MM, 90 DEGREES TILTABLE, WITH 3 T-GROOVES PITCH 80 MM T = 12
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.175 €
Ubicación: Land-ear-deep and speed display - digital thread cutter m20 (gradient-dependent) variable speed 125-4000 u/mon in two stages, stage change of belt apportionment. 

drilling capacity 525/30 mm of thread cutting capacity (depending on elevation) m20 spindle mk 3 drilling depth 125 mm projection of 280 mm-usable table surface (pivoting) 420 x 340 mm
feed rate of hand table height with rack machines dimensions (w x d x h) 520 x 820 x 1900 mm motor three-phase 400 v pole changing bar 0.9 / 1.45 kw weight 275 kg EAR-DEEP AND SPEED DISPLAY - DIGITAL THREAD CUTTER M20 (GRADIENT-DEPENDENT) VARIABLE SPEED 125-4000 U/MON IN TWO STAGES, STAGE CHANGE OF BELT APPORTIONMENT. DRILLING CAPACITY 525/30 MM OF THREAD CUTTING CAPACITY (DEPENDING ON ELEVATION) M20 SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION OF 280 MM-USABLE TABLE SURFACE (PIVOTING) 420 X 340 MM FEED RATE OF HAND TABLE HEIGHT WITH RACK MACHINES DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 0.9 / 1.45 KW WEIGHT 275 KG
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 800 €
Ubicación: Land-weight approx.: 35 kg<br/>dimensions (l x w x h) approx.: 800 x 400 x 500 mm<br/>description: grinding types hss / hsco / vhm drill diameter 1-20 mm, drilling angle 80-150 °, grinding angle 0-20 (30) 248 °, grinding speed 2800 rev / min, 220 volt 0.3 kw with various accessories swiss qualt tines machine WEIGHT APPROX.: 35 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 400 X 500 MM
DESCRIPTION: GRINDING TYPES HSS / HSCO / VHM DRILL DIAMETER 1-20 MM, DRILLING ANGLE 80-150 °, GRINDING ANGLE 0-20 (30) 248 °, GRINDING SPEED 2800 REV / MIN, 220 VOLT 0.3 KW WITH VARIOUS ACCESSORIES SWISS QUALT TINES MACHINE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeler sidel alfa rollquatro f 25 hot melt glue with auxiliaries
 
this alfa rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! rollquattro is a rotary wraparound labeler equipped with an ergonomically designed, robust and precise linear labeling station with place for two rolls of film labels. label is attached to bottle with two hot melt glue stripes. label platforms are teethed belt driven via single servo motor. this labeler has hh2 configuration which enables improved flexibility in handling bottles of different sizes and greater reliability for small bottles at very high speeds. labeler is still installed and powered and in good condition. machine comes with videojet label coding printer and metec label inspector.
 
manufacturer sidel alfa inc
labeler type: alfa rollquatro f25 12t/sr/hh2 s1/e1
gluing system hot glue stripes
manufacturing year 2006
capacity 42000 bph
carousel diameter 720 mm
number of labeling stations 18
bottle diameter 53 - 110 mm
pitch 126 mm
label min-max length 177 - 355 mm
electric power 36 kw
in jet coder videojet 1620
label inspector metec promecon 2000   LABELER SIDEL ALFA ROLLQUATRO F 25 HOT MELT GLUE WITH AUXILIARIES THIS ALFA ROLLQUATRO LABELER WAS INSTALLED IN 2006 AND IT WAS OPERATED TIME TO TIME TILL 2014 TOTAL OPERATING HOURS NOT EXCEEDING 10 000 HOURS! ROLLQUATTRO IS A ROTARY WRAPAROUND LABELER EQUIPPED WITH AN ERGONOMICALLY DESIGNED, ROBUST AND PRECISE LINEAR LABELING STATION WITH PLACE FOR TWO ROLLS OF FILM LABELS. LABEL IS ATTACHED TO BOTTLE WITH TWO HOT MELT GLUE STRIPES. LABEL PLATFORMS ARE TEETHED BELT DRIVEN VIA SINGLE SERVO MOTOR. THIS LABELER HAS HH2 CONFIGURATION WHICH ENABLES IMPROVED FLEXIBILITY IN HANDLING BOTTLES OF DIFFERENT SIZES AND GREATER RELIABILITY FOR SMALL BOTTLES AT VERY HIGH SPEEDS. LABELER IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MACHINE COMES WITH VIDEOJET LABEL CODING PRINTER AND METEC LABEL INSPECTOR. MANUFACTURER SIDEL ALFA INC LABELER TYPE: ALFA ROLLQUATRO F25 12T/SR/HH2 S1/E1 GLUING SYSTEM HOT GLUE STRIPES MANUFACTURING YEAR 2006 CAPACITY 42000 BPH CAROUSEL DIAMETER 720 MM NUMBER OF LABELING STATIONS 18 BOTTLE DIAMETER 53 - 110 MM PITCH 126 MM LABEL MIN-MAX LENGTH 177 - 355 MM ELECTRIC POWER 36 KW IN JET CODER VIDEOJET 1620 LABEL INSPECTOR METEC PROMECON 2000
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 6700 kg<br/>working width: 1350 mm<br/>dimensions (l x w x h) approx.: 2200 x 3500 x 2510 mm<br/>description: grinding width 1350 mm<br> transverse / longitudinal / longitudinal dlb / brush / brush<br> <br> features:<br> conveyor belt cleaning device<br> feed rate 3-15 m / min. frequencyajusted,<br> working height constant 800 mm,<br> machine head according to the workpieces (3-160mm) motorized adjustable<br> <br> 1 pressure roller 50 m, oscillating, in the inlet of the machine, including workpiece interference control<br> <br> 1 industrial pc15 , lcd tft touch screen<br> <br> 1 transverse sanding unit<br> belt dimensions: 4800 x 150 mm<br> belt speed: 2.0 - 20.0 m / s<br> drive power: 15 kw<br> via electronic frequency control for stepless adjustment of the grinding belt speeds, in connection with additional rotor for belt blowing, wear-free braking device, pressure lamella belt system, belt jet device controlled depending on workpiece, can be switched off<br> <br> 1 longitudinal sanding unit<br> belt dimensions: 2620 x 1400 mm<br> belt speed: 1.8 - 18.0 m / s<br> drive power: 15 kw<br> <br> suitable for light calibration work,<br> eccentric bearing of the front guide roller 110 mm, smooth<br> <br> equipment for homing and mating<br> <br> via electronic frequency control for stepless adjustment of the grinding belt speeds, in connection with double number of blowholes on the belt radiation, wear-free braking device, belt jet device controlled depending on workpiece, can be switched off, automatic compensation of possibly different belt edge lengths.<br> <br> 1 longitudinal sanding unit with pressure lamella belt system<br> belt dimensions: 2620 x 1400 mm<br> belt speed: 1.8 - 18.0 m / s (with pressure bar belt system 1.8 - 9 m / s)<br> drive power: 15 kw<br> <br> via electronic frequency control for stepless adjustment of the grinding belt speeds, in connection with double number of blowholes on the belt radiation, wear-free braking device, belt je WEIGHT APPROX.: 6700 KG
WORKING WIDTH: 1350 MM
DIMENSIONS (L X W X H) APPROX.: 2200 X 3500 X 2510 MM
DESCRIPTION: GRINDING WIDTH 1350 MM
TRANSVERSE / LONGITUDINAL / LONGITUDINAL DLB / BRUSH / BRUSH

FEATURES:
CONVEYOR BELT CLEANING DEVICE
FEED RATE 3-15 M / MIN. FREQUENCYAJUSTED,
WORKING HEIGHT CONSTANT 800 MM,
MACHINE HEAD ACCORDING TO THE WORKPIECES (3-160MM) MOTORIZED ADJUSTABLE

1 PRESSURE ROLLER 50 M, OSCILLATING, IN THE INLET OF THE MACHINE, INCLUDING WORKPIECE INTERFERENCE CONTROL

1 INDUSTRIAL PC15 , LCD TFT TOUCH SCREEN

1 TRANSVERSE SANDING UNIT
BELT DIMENSIONS: 4800 X 150 MM
BELT SPEED: 2.0 - 20.0 M / S
DRIVE POWER: 15 KW
VIA ELECTRONIC FREQUENCY CONTROL FOR STEPLESS ADJUSTMENT OF THE GRINDING BELT SPEEDS, IN CONNECTION WITH ADDITIONAL ROTOR FOR BELT BLOWING, WEAR-FREE BRAKING DEVICE, PRESSURE LAMELLA BELT SYSTEM, BELT JET DEVICE CONTROLLED DEPENDING ON WORKPIECE, CAN BE SWITCHED OFF

1 LONGITUDINAL SANDING UNIT
BELT DIMENSIONS: 2620 X 1400 MM
BELT SPEED: 1.8 - 18.0 M / S
DRIVE POWER: 15 KW

SUITABLE FOR LIGHT CALIBRATION WORK,
ECCENTRIC BEARING OF THE FRONT GUIDE ROLLER 110 MM, SMOOTH

EQUIPMENT FOR HOMING AND MATING

VIA ELECTRONIC FREQUENCY CONTROL FOR STEPLESS ADJUSTMENT OF THE GRINDING BELT SPEEDS, IN CONNECTION WITH DOUBLE NUMBER OF BLOWHOLES ON THE BELT RADIATION, WEAR-FREE BRAKING DEVICE, BELT JET DEVICE CONTROLLED DEPENDING ON WORKPIECE, CAN BE SWITCHED OFF, AUTOMATIC COMPENSATION OF POSSIBLY DIFFERENT BELT EDGE LENGTHS.

1 LONGITUDINAL SANDING UNIT WITH PRESSURE LAMELLA BELT SYSTEM
BELT DIMENSIONS: 2620 X 1400 MM
BELT SPEED: 1.8 - 18.0 M / S (WITH PRESSURE BAR BELT SYSTEM 1.8 - 9 M / S)
DRIVE POWER: 15 KW

VIA ELECTRONIC FREQUENCY CONTROL FOR STEPLESS ADJUSTMENT OF THE GRINDING BELT SPEEDS, IN CONNECTION WITH DOUBLE NUMBER OF BLOWHOLES ON THE BELT RADIATION, WEAR-FREE BRAKING DEVICE, BELT JE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-
description
brand	cleveland
model	tket-6t
id	7296
status	active
price	1.500 € + vat
year of manufacture	1999
location	oradea (ro)

twin steam jacketed tilting kettle, cleveland tket-6t manufactured in 1999, made of stainless steel with manual tilting for easy drain, steam jacket filled with treated water that does not require refilling or venting. the temperature control is accurate and consistant with a solid state temperature control (mechanical thermostate are less accurate),  operating temperature range from 145° - 260°f (63°c - 127°c), control panel includes: led indicator for heat cycle, led indicator for low water, power on/off switch, adjustable temperature control dial. rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. color coded easy to read pressure gauge with DESCRIPTION BRAND CLEVELAND MODEL TKET-6T ID 7296 STATUS ACTIVE PRICE 1.500 € + VAT YEAR OF MANUFACTURE 1999 LOCATION ORADEA (RO) TWIN STEAM JACKETED TILTING KETTLE, CLEVELAND TKET-6T MANUFACTURED IN 1999, MADE OF STAINLESS STEEL WITH MANUAL TILTING FOR EASY DRAIN, STEAM JACKET FILLED WITH TREATED WATER THAT DOES NOT REQUIRE REFILLING OR VENTING. THE TEMPERATURE CONTROL IS ACCURATE AND CONSISTANT WITH A SOLID STATE TEMPERATURE CONTROL (MECHANICAL THERMOSTATE ARE LESS ACCURATE), OPERATING TEMPERATURE RANGE FROM 145° - 260°F (63°C - 127°C), CONTROL PANEL INCLUDES: LED INDICATOR FOR HEAT CYCLE, LED INDICATOR FOR LOW WATER, POWER ON/OFF SWITCH, ADJUSTABLE TEMPERATURE CONTROL DIAL. REAR MOUNTED EASY ACCESS PRESSURE GAUGE AND PRESSURE RELIEF VALVE TO PREVENT TAMPERING. COLOR CODED EASY TO READ PRESSURE GAUGE WITH "GREEN" AND "VENT AIR ZONE", SAFETY VALVE FOR PRESSURES GREATER THAN 50 PSI. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-variabel speed, timer, \r\nbowl lifting and lowering by a lever \r\naccessories: 1 bowl 40 l stainless steel \r\n                 1 whip stainless steel, \r\n                 1 doughhook stainless steel, \r\n                 1 flatbeater stainless steel VARIABEL SPEED, TIMER, \R\NBOWL LIFTING AND LOWERING BY A LEVER \R\NACCESSORIES: 1 BOWL 40 L STAINLESS STEEL \R\N 1 WHIP STAINLESS STEEL, \R\N 1 DOUGHHOOK STAINLESS STEEL, \R\N 1 FLATBEATER STAINLESS STEEL
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-container: 7 different pcs., moveable\r\ninclude warming cabinet\r\ntotal size l 915, w 580, h 800 mm\r\n CONTAINER: 7 DIFFERENT PCS., MOVEABLE\R\NINCLUDE WARMING CABINET\R\NTOTAL SIZE L 915, W 580, H 800 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-pneum. for drilling in 2 levels in one set-up, all types of framework plugging, such as longitudinal and transverse friesen, mitred frame, easy transition to recesses,. lifting and lowering 0-100 mm. bohrtife 150 mm, 12 mm grid rail, precision. chuck, sã¤mtl. attacks, drilling motor 1,5 kw - 400 v-  PNEUM. FOR DRILLING IN 2 LEVELS IN ONE SET-UP, ALL TYPES OF FRAMEWORK PLUGGING, SUCH AS LONGITUDINAL AND TRANSVERSE FRIESEN, MITRED FRAME, EASY TRANSITION TO RECESSES,. LIFTING AND LOWERING 0-100 MM. BOHRTIFE 150 MM, 12 MM GRID RAIL, PRECISION. CHUCK, S&ATILDE;&CURREN;MTL. ATTACKS, DRILLING MOTOR 1,5 KW - 400 V-
Vendedor: voelkel-hightech
Año de construcción: usado
Ubicación: Land-attachement:  2 pistons, filling variabel  5  -  10 g\r\n                          hopper approx. 2 kg  marmelade ATTACHEMENT: 2 PISTONS, FILLING VARIABEL 5 - 10 G\R\N HOPPER APPROX. 2 KG MARMELADE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-heavy iron stand for viibrationsfreies work, swivel spindle 45 degree swiveling,.
electric height and swivel adjustment with digital display, aigner stop. in-side table extensions, frã¤spindel 40 mm, various accessories, great condition, made in germany-
 HEAVY IRON STAND FOR VIIBRATIONSFREIES WORK, SWIVEL SPINDLE 45 DEGREE SWIVELING,. ELECTRIC HEIGHT AND SWIVEL ADJUSTMENT WITH DIGITAL DISPLAY, AIGNER STOP. IN-SIDE TABLE EXTENSIONS, FR&ATILDE;&CURREN;SPINDEL 40 MM, VARIOUS ACCESSORIES, GREAT CONDITION, MADE IN GERMANY-
Vendedor: voelkel-hightech
Año de construcción: usado
Ubicación: Land-doughweightrange 40 - 150 g, capacity approx. 7.000 pcs./h\r\nrighthand - operation include \r\ndivider, 5 rows, \r\ndepositing device \r\n  working width 600 mm\r\n  max. setting length  2000 mm\r\n  variable speed DOUGHWEIGHTRANGE 40 - 150 G, CAPACITY APPROX. 7.000 PCS./H\R\NRIGHTHAND - OPERATION INCLUDE \R\NDIVIDER, 5 ROWS, \R\NDEPOSITING DEVICE \R\N WORKING WIDTH 600 MM\R\N MAX. SETTING LENGTH 2000 MM\R\N VARIABLE SPEED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-tragrolle(n) industrial-grade diameter 80 mm length 500 mm steel ball bearings loads up to 200 kg
support rollers are suitable for heavy duty roller conveyors, roller supports, machine feeders etc.
the roles are used but undamaged and have some light surface rust.
the entire length of a roll is approximately 540 mm, the shaft has a diameter of 14 mm and an aussparungvon ca. 10 mm on the shaft ends TRAGROLLE(N) INDUSTRIAL-GRADE DIAMETER 80 MM LENGTH 500 MM STEEL BALL BEARINGS LOADS UP TO 200 KG SUPPORT ROLLERS ARE SUITABLE FOR HEAVY DUTY ROLLER CONVEYORS, ROLLER SUPPORTS, MACHINE FEEDERS ETC. THE ROLES ARE USED BUT UNDAMAGED AND HAVE SOME LIGHT SURFACE RUST. THE ENTIRE LENGTH OF A ROLL IS APPROXIMATELY 540 MM, THE SHAFT HAS A DIAMETER OF 14 MM AND AN AUSSPARUNGVON CA. 10 MM ON THE SHAFT ENDS
Vendedor: Voglauer Gschwandtner & Zwilling GmbH
Año de construcción: usado
Ubicación: Land-working width 1000 mm, working height 170 mm\r\nslicing width 830 mm, thickness 10,7 mm\r\nvariable speed of automatic infeed, \r\nstainless steel, model 2003 WORKING WIDTH 1000 MM, WORKING HEIGHT 170 MM\R\NSLICING WIDTH 830 MM, THICKNESS 10,7 MM\R\NVARIABLE SPEED OF AUTOMATIC INFEED, \R\NSTAINLESS STEEL, MODEL 2003
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-alternator abb amg 0900 - 4541 kva / 720 rpm / 60 hz - 8 new units

this alternator was designed to operate with diesel or gas engine generator at rotation speed of 720 rpm and electrical output max 4541 kva / 6.6 kv / 60 hz. there are 8 identical alternators available al brand new and identical. the alternator frame is a rigid welded structure and the sator is built of thin electric sheet laminations which are insulated on both sides with heat resistant inorganic resin. alternators have two bearings and they have brushless agitation and with special unitrol avr 1000 control system. the alternator is air cooled. all alternators are in warm store house, packed for sea transportation and in new like condition.

technical data
manufacturer: abb finland
year of manufacturing: 2010
alternator type amg 0900sk10 lse
cooling method air cooled
number of alternators 8 identical units
rated output 4541 kva / 6600 v / 60 hz
design rotation speed 720 rpm
power factor 0.85
efficiency at 100% load 96.50 %
weight of one alternator net 17750 kg   ALTERNATOR ABB AMG 0900 - 4541 KVA / 720 RPM / 60 HZ - 8 NEW UNITS THIS ALTERNATOR WAS DESIGNED TO OPERATE WITH DIESEL OR GAS ENGINE GENERATOR AT ROTATION SPEED OF 720 RPM AND ELECTRICAL OUTPUT MAX 4541 KVA / 6.6 KV / 60 HZ. THERE ARE 8 IDENTICAL ALTERNATORS AVAILABLE AL BRAND NEW AND IDENTICAL. THE ALTERNATOR FRAME IS A RIGID WELDED STRUCTURE AND THE SATOR IS BUILT OF THIN ELECTRIC SHEET LAMINATIONS WHICH ARE INSULATED ON BOTH SIDES WITH HEAT RESISTANT INORGANIC RESIN. ALTERNATORS HAVE TWO BEARINGS AND THEY HAVE BRUSHLESS AGITATION AND WITH SPECIAL UNITROL AVR 1000 CONTROL SYSTEM. THE ALTERNATOR IS AIR COOLED. ALL ALTERNATORS ARE IN WARM STORE HOUSE, PACKED FOR SEA TRANSPORTATION AND IN NEW LIKE CONDITION. TECHNICAL DATA MANUFACTURER: ABB FINLAND YEAR OF MANUFACTURING: 2010 ALTERNATOR TYPE AMG 0900SK10 LSE COOLING METHOD AIR COOLED NUMBER OF ALTERNATORS 8 IDENTICAL UNITS RATED OUTPUT 4541 KVA / 6600 V / 60 HZ DESIGN ROTATION SPEED 720 RPM POWER FACTOR 0.85 EFFICIENCY AT 100% LOAD 96.50 % WEIGHT OF ONE ALTERNATOR NET 17750 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-lefthand - operation include \r\nhead machine  / divider\r\nmoistener + strewer, include\r\ndepositing device \r\n  working width 600 mm\r\n  max. setting length  2000 mm\r\n  variable speed\r\n LEFTHAND - OPERATION INCLUDE \R\NHEAD MACHINE / DIVIDER\R\NMOISTENER + STREWER, INCLUDE\R\NDEPOSITING DEVICE \R\N WORKING WIDTH 600 MM\R\N MAX. SETTING LENGTH 2000 MM\R\N VARIABLE SPEED\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-wartsila 52 mw chp power plant with 6 x 20v34sg gas generators - 2005

complete running power plant with 6 units of wartsila 20v34sg spark ignited natural gas engine driven generators. plant has the heat recovery boilers which can produce 6 x 4.5 t/h low pressure steam. the main equipment was delivered and commissioned by wartsila in year 2006 and 2008 and today the units have approx 40 000 - 50 000 operating hours depending on unit. the equipment is in good operational condition but the engines need a 46 000 hour overhaul.

generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.

the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power

main technical data at full load and current site conditions:
installed power 52 300 kw at 31.5 kv, 50 hz
plant steam output 6 x 5 tons/h at 14 bar
fuel: natural gas
engines: 6 x w20v34sg, running at 750 rpm
alternators: 6 x abb 12 162 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2005
operating hours: approx 50000 /unit
original heat rate (at alt.) 8188 kj/kwhe (44.0 %)
plant own consumption: 1200 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: in good operational   WARTSILA 52 MW CHP POWER PLANT WITH 6 X 20V34SG GAS GENERATORS - 2005 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 20V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. PLANT HAS THE HEAT RECOVERY BOILERS WHICH CAN PRODUCE 6 X 4.5 T/H LOW PRESSURE STEAM. THE MAIN EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2006 AND 2008 AND TODAY THE UNITS HAVE APPROX 40 000 - 50 000 OPERATING HOURS DEPENDING ON UNIT. THE EQUIPMENT IS IN GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 46 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER 52 300 KW AT 31.5 KV, 50 HZ PLANT STEAM OUTPUT 6 X 5 TONS/H AT 14 BAR FUEL: NATURAL GAS ENGINES: 6 X W20V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X ABB 12 162 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2005 OPERATING HOURS: APPROX 50000 /UNIT ORIGINAL HEAT RATE (AT ALT.) 8188 KJ/KWHE (44.0 %) PLANT OWN CONSUMPTION: 1200 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: IN GOOD OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-belt width 365 mm, length 3,8 m, 1 motor\r\nheight input 460, output 1400 mm\r\nvariable speed\r\n BELT WIDTH 365 MM, LENGTH 3,8 M, 1 MOTOR\R\NHEIGHT INPUT 460, OUTPUT 1400 MM\R\NVARIABLE SPEED\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 110.000 USD
Ubicación: Land-we can offer you 4 x sds xch-1200 texturizing machines,manufactured in 2003,216(9 sections) spindles,have been refurbished compltetly this year,control system has been improved,enlonged from 216(9 sections)into 264 spindles(11 sections).all bearings have been replaced by new one,like new machines.have both machines for pet and pa.serious buyers contact please.

we are machinery dealer of polymerization,poy,fdy,dty,staple,nonwovens and spare parts.  WE CAN OFFER YOU 4 X SDS XCH-1200 TEXTURIZING MACHINES,MANUFACTURED IN 2003,216(9 SECTIONS) SPINDLES,HAVE BEEN REFURBISHED COMPLTETLY THIS YEAR,CONTROL SYSTEM HAS BEEN IMPROVED,ENLONGED FROM 216(9 SECTIONS)INTO 264 SPINDLES(11 SECTIONS).ALL BEARINGS HAVE BEEN REPLACED BY NEW ONE,LIKE NEW MACHINES.HAVE BOTH MACHINES FOR PET AND PA.SERIOUS BUYERS CONTACT PLEASE. WE ARE MACHINERY DEALER OF POLYMERIZATION,POY,FDY,DTY,STAPLE,NONWOVENS AND SPARE PARTS.
Vendedor: SHANGHAI HELM IMP.& EXP. LTD
Año de construcción: usado
Ubicación: Land-approx. 30 l kg, bowl doublejacked \r\nelectric heating,  bowl + mixer stainless steel\r\nheating element 3000 w\r\nmotor 220/380v //0,37 kw// variable speed 7,2 - 36 rpm APPROX. 30 L KG, BOWL DOUBLEJACKED \R\NELECTRIC HEATING, BOWL + MIXER STAINLESS STEEL\R\NHEATING ELEMENT 3000 W\R\NMOTOR 220/380V //0,37 KW// VARIABLE SPEED 7,2 - 36 RPM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-wartsila 41 mw single cycle power plant with 6 x 16v34sg gas generators - 2008
 
complete running power plant with 6 units of wartsila 16v34sg spark ignited natural gas engine driven generators. the equipment was delivered and commissioned by wartsila in year 2008 and today the units have approx 25 000 operating hours. the equipment is in very good operational condition but the engines need a 24 000 hour overhaul.
 
generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.
 
the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power
 
main technical data at full load and current site conditions:
 
installed power: 41 820 kw at 31.5 kv, 50 hz
fuel: natural gas
engines: 6 x w16v34sg, running at 750 rpm
alternators: 6 x akv 8712 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2008
operating hours: approx 25000 /unit
original heat rate (at alt. term) 8140 kj/kwhe (44.2 %)
plant own consumption: 836 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: very good, operational   WARTSILA 41 MW SINGLE CYCLE POWER PLANT WITH 6 X 16V34SG GAS GENERATORS - 2008 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 16V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. THE EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2008 AND TODAY THE UNITS HAVE APPROX 25 000 OPERATING HOURS. THE EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 24 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER: 41 820 KW AT 31.5 KV, 50 HZ FUEL: NATURAL GAS ENGINES: 6 X W16V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X AKV 8712 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2008 OPERATING HOURS: APPROX 25000 /UNIT ORIGINAL HEAT RATE (AT ALT. TERM) 8140 KJ/KWHE (44.2 %) PLANT OWN CONSUMPTION: 836 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: VERY GOOD, OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-3 cylinders length 550 mm, cap. variable, moveable\r\ncylinder diameter 2 pcs. 200 mm, grooved\r\n                          1 pcs. 300 mm, smooth, include  scraper 3 CYLINDERS LENGTH 550 MM, CAP. VARIABLE, MOVEABLE\R\NCYLINDER DIAMETER 2 PCS. 200 MM, GROOVED\R\N 1 PCS. 300 MM, SMOOTH, INCLUDE SCRAPER
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)