2933 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-ostas plate shear

type orgm 2050 x 3

-capaciteit 2050 x 3 mm
-achteraanslag electrical
-voetbediening
-fotocelbeveiliging van de achterzijde
-oplegarmen
-verlichting van snijlijn
-remmotor
-noodstop
-documentatie
-weight 2000 kg
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) OSTAS PLATE SHEAR TYPE ORGM 2050 X 3 -CAPACITEIT 2050 X 3 MM -ACHTERAANSLAG ELECTRICAL -VOETBEDIENING -FOTOCELBEVEILIGING VAN DE ACHTERZIJDE -OPLEGARMEN -VERLICHTING VAN SNIJLIJN -REMMOTOR -NOODSTOP -DOCUMENTATIE -WEIGHT 2000 KG -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-machine still by customer. ceasing his activity. MACHINE STILL BY CUSTOMER. CEASING HIS ACTIVITY.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-powder coating equipment

 parkerizing phosphate coating equipment
make:wastec(korean)
year:2014
2) process tank 
? load/unload(#1):size: 800(w) x 1,200(l) x 1,200(h)mm 
? alkali cleaner tank(#2) : size: 800(w) x 1,200(l) x 1,200(h)mm
3) 2-step water rinse bath(#3,4): size: 1,400(w) x 1,200(l) x 1,200(h)mm
4) acid rinse bath(#5): size: 750(w) x 1,200(l) x  1,200(h)mm
5) 2-step water rinse bath(#6,7): 1,400(w) x 1,200(l) x  1,200(h)mm
7) surface condition bath(#8) :: 750(w) x 1,200(l) 1,200(h)mm
8) coating bath(#9,10) : 900(w) x 1,200(l) x 1,200(h)mm
9) hot water rinse(#11) : 750(w) x 1,200(l) x 1,200(h)mm
10) dry tank(#12) :  
 size(inside): 700(w) x   1,200(l) x 1,200(h)mm
    size(outside): 1,300(w) x  2,000(l) x 1,200(h)mm  
  temp: 90?~110?
11) carrier system(#1,2): 1,400(w) x 1,600(l) x 600(h)mm 
   line speed:   transer-0.2~0.6m/sec     lifting-0.2~0.5m/sec
12) heating system :   steam heater
13) degreaser oil and water separator 
  tank(sus304): 600(w)x 1,200(l) x 700(h)mm
14) liquid agitator   
 15) acid bath filter:  4,800~6,000?/hr
16) piping system
17) basket    size: 500(w) x 600(l) x  400(h)mm
18) condensing water recovery ststem
19) electrical system 
   main power: 440v x 3Ø x 60hz  
  control power: 220v x 1Ø   x 60hz   
20) anti-polution system
21) carrier type tank :: 1,100?

sand blast m/c
make:sanga(korea)
year:2014
 conveyor type 
cycle time: 10~12sec
 cyclone & storage tank: Ø450 x 800(l)mm 
nozzle unit 
conveyor & turning unit 
loading/unloading unit 
nozzle oscillator 
dust collector

anti-air pollution equipment 
make:seonghwa(korea)
year:2014
packed-tower 
cap: 230cmm 
body: ?2,000 x 5,000(l)mm 
stack: ?650 x 3,000(l)mm 
turbo fan: 230?/min x 200mmaq 
motor: 20hp 

coating and dryer 
make:wastec(korean)
year:2002
14,500(l) x 4,000(w x 1,500(h) 
2) 300kw  
cap: 1,080ea/hr 
1) preheater dryer: 3,000(l) x 2,200(w)  , 30kw(1set)  
 blower: 23.3? x 19mmaq          
2) 1st coating  1,500(l) x 2,000(w)
nozzle: 6set 
 3) 1st dryer: 4,800(l) x 2,200(w), 24kw(2set)  
 blower: 20? x 17mmaq(2set)
4) 2nd coating  
 nozzle: 6set , 1,500(l) x 2,000(w)
5) 2nd dryer:: 4,000(l) x 2,000(w), 30kw(1set)  
 blower: 20? x 17mmaq(1set)
6) low temperature dryer:: 12,500(l) x 1,000(w), 30kw(3set)  
 blower: 23.3? x 190mmaq (3set)
7) cooling  : 1,000(l) x 800(w) , 10kw(1set)

washing equipment 
make:wastec(korean)
year:2002
7,000(l) x 1,100(w) x 1,800(h) 
2) cap: 1,500ea/hr 
3) 100kw
4)  r/o system
5) electric heater type

 dryer 
make:hanil(korea)
year:2002
 size: 1,440(l) x 2,000(w) x 1,530(h)
2) cap: 1,000ea/hr 
3)  40kw
4) car and rack 2set
5) heater: scr unit type

washer & bush insert m/c 
make:kumduk(korea)
year:2015
turn table unit: 2head 
unloading loader 
base & frame & cover: 75 x 75mm square pipe 
in loader unit 
index table unit 
washer loader unit x 2set
 washer check unit 
bush feed press unit: bush 

3-pin press  
make:kumduk(korea)
year:2015
base & frame & cover 
6-axics multi articulation  robot(yaskawa) 
manipulator
 index table unit 
3-pin feed unit
3-pin press unit 
unloading unit
 3-pin height check unit 

air compressor
make:taesan(korea)
year:2015
 
shaft powder coating line
make:misung(korea)
year:2015
 loading & unloading unit 
 preheater dry oven 45kw(15kw x 3set)
preheater after cooling zone: 
4) powder automatic equipment
5) idle transfer & index unit
6) loading transfer & masking    jig unit
7) oven jig: 16 x 130ea
8) powder recovery system
9) main baking oven 
10) floor conveyor
11) main cooling zone 

   bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
  POWDER COATING EQUIPMENT PARKERIZING PHOSPHATE COATING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2014 2) PROCESS TANK ? LOAD/UNLOAD(#1):SIZE: 800(W) X 1,200(L) X 1,200(H)MM ? ALKALI CLEANER TANK(#2) : SIZE: 800(W) X 1,200(L) X 1,200(H)MM 3) 2-STEP WATER RINSE BATH(#3,4): SIZE: 1,400(W) X 1,200(L) X 1,200(H)MM 4) ACID RINSE BATH(#5): SIZE: 750(W) X 1,200(L) X 1,200(H)MM 5) 2-STEP WATER RINSE BATH(#6,7): 1,400(W) X 1,200(L) X 1,200(H)MM 7) SURFACE CONDITION BATH(#8) :: 750(W) X 1,200(L) 1,200(H)MM 8) COATING BATH(#9,10) : 900(W) X 1,200(L) X 1,200(H)MM 9) HOT WATER RINSE(#11) : 750(W) X 1,200(L) X 1,200(H)MM 10) DRY TANK(#12) : SIZE(INSIDE): 700(W) X 1,200(L) X 1,200(H)MM SIZE(OUTSIDE): 1,300(W) X 2,000(L) X 1,200(H)MM TEMP: 90?~110? 11) CARRIER SYSTEM(#1,2): 1,400(W) X 1,600(L) X 600(H)MM LINE SPEED: TRANSER-0.2~0.6M/SEC LIFTING-0.2~0.5M/SEC 12) HEATING SYSTEM : STEAM HEATER 13) DEGREASER OIL AND WATER SEPARATOR TANK(SUS304): 600(W)X 1,200(L) X 700(H)MM 14) LIQUID AGITATOR 15) ACID BATH FILTER: 4,800~6,000?/HR 16) PIPING SYSTEM 17) BASKET SIZE: 500(W) X 600(L) X 400(H)MM 18) CONDENSING WATER RECOVERY STSTEM 19) ELECTRICAL SYSTEM MAIN POWER: 440V X 3Ø X 60HZ CONTROL POWER: 220V X 1Ø X 60HZ 20) ANTI-POLUTION SYSTEM 21) CARRIER TYPE TANK :: 1,100? SAND BLAST M/C MAKE:SANGA(KOREA) YEAR:2014 CONVEYOR TYPE CYCLE TIME: 10~12SEC CYCLONE & STORAGE TANK: Ø450 X 800(L)MM NOZZLE UNIT CONVEYOR & TURNING UNIT LOADING/UNLOADING UNIT NOZZLE OSCILLATOR DUST COLLECTOR ANTI-AIR POLLUTION EQUIPMENT MAKE:SEONGHWA(KOREA) YEAR:2014 PACKED-TOWER CAP: 230CMM BODY: ?2,000 X 5,000(L)MM STACK: ?650 X 3,000(L)MM TURBO FAN: 230?/MIN X 200MMAQ MOTOR: 20HP COATING AND DRYER MAKE:WASTEC(KOREAN) YEAR:2002 14,500(L) X 4,000(W X 1,500(H) 2) 300KW CAP: 1,080EA/HR 1) PREHEATER DRYER: 3,000(L) X 2,200(W) , 30KW(1SET) BLOWER: 23.3? X 19MMAQ 2) 1ST COATING 1,500(L) X 2,000(W) NOZZLE: 6SET 3) 1ST DRYER: 4,800(L) X 2,200(W), 24KW(2SET) BLOWER: 20? X 17MMAQ(2SET) 4) 2ND COATING NOZZLE: 6SET , 1,500(L) X 2,000(W) 5) 2ND DRYER:: 4,000(L) X 2,000(W), 30KW(1SET) BLOWER: 20? X 17MMAQ(1SET) 6) LOW TEMPERATURE DRYER:: 12,500(L) X 1,000(W), 30KW(3SET) BLOWER: 23.3? X 190MMAQ (3SET) 7) COOLING : 1,000(L) X 800(W) , 10KW(1SET) WASHING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2002 7,000(L) X 1,100(W) X 1,800(H) 2) CAP: 1,500EA/HR 3) 100KW 4) R/O SYSTEM 5) ELECTRIC HEATER TYPE DRYER MAKE:HANIL(KOREA) YEAR:2002 SIZE: 1,440(L) X 2,000(W) X 1,530(H) 2) CAP: 1,000EA/HR 3) 40KW 4) CAR AND RACK 2SET 5) HEATER: SCR UNIT TYPE WASHER & BUSH INSERT M/C MAKE:KUMDUK(KOREA) YEAR:2015 TURN TABLE UNIT: 2HEAD UNLOADING LOADER BASE & FRAME & COVER: 75 X 75MM SQUARE PIPE IN LOADER UNIT INDEX TABLE UNIT WASHER LOADER UNIT X 2SET WASHER CHECK UNIT BUSH FEED PRESS UNIT: BUSH 3-PIN PRESS MAKE:KUMDUK(KOREA) YEAR:2015 BASE & FRAME & COVER 6-AXICS MULTI ARTICULATION ROBOT(YASKAWA) MANIPULATOR INDEX TABLE UNIT 3-PIN FEED UNIT 3-PIN PRESS UNIT UNLOADING UNIT 3-PIN HEIGHT CHECK UNIT AIR COMPRESSOR MAKE:TAESAN(KOREA) YEAR:2015 SHAFT POWDER COATING LINE MAKE:MISUNG(KOREA) YEAR:2015 LOADING & UNLOADING UNIT PREHEATER DRY OVEN 45KW(15KW X 3SET) PREHEATER AFTER COOLING ZONE: 4) POWDER AUTOMATIC EQUIPMENT 5) IDLE TRANSFER & INDEX UNIT 6) LOADING TRANSFER & MASKING JIG UNIT 7) OVEN JIG: 16 X 130EA 8) POWDER RECOVERY SYSTEM 9) MAIN BAKING OVEN 10) FLOOR CONVEYOR 11) MAIN COOLING ZONE BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-reactor (1x), make de dietrich, type ae-4000 l, no 62998, new 1999, material glass lined (3009 u), capacity 5374 ltr, vessel sizes dia. 1796x1520mm, dished bottom, dished top side, manhole dia. 500mm, top connections 5x dia. 150mm + 2x dia. 250mm, outlet dia. 100mm, working pressure vac/6 bar, test pressure 9 bar, with jacket (677 ltr), working pressure vac/7 bar, test pressure 12 bar, max. temperature -25/+200 degr. c., with propellor stirrer, motor 11,0 kw, 230/400 volt (ex), floorspace 2,4x2,4 mreactorsreactors > reactors what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! REACTOR (1X), MAKE DE DIETRICH, TYPE AE-4000 L, NO 62998, NEW 1999, MATERIAL GLASS LINED (3009 U), CAPACITY 5374 LTR, VESSEL SIZES DIA. 1796X1520MM, DISHED BOTTOM, DISHED TOP SIDE, MANHOLE DIA. 500MM, TOP CONNECTIONS 5X DIA. 150MM + 2X DIA. 250MM, OUTLET DIA. 100MM, WORKING PRESSURE VAC/6 BAR, TEST PRESSURE 9 BAR, WITH JACKET (677 LTR), WORKING PRESSURE VAC/7 BAR, TEST PRESSURE 12 BAR, MAX. TEMPERATURE -25/+200 DEGR. C., WITH PROPELLOR STIRRER, MOTOR 11,0 KW, 230/400 VOLT (EX), FLOORSPACE 2,4X2,4 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-anodizing coating (alumite coating) for aluminium parts

1. anodizing line(automatic type) 
make:taewon(korea)
year:2012
cap': 7,000ea/hour 
 
2-1. anodizing line(manual type) 
make:chunwoo(korea)
year:2012
  
2-2. anodizing line(manual type)
make:beomyang(korean)
year:2012

2-3. anodizing line(manual type)-rectifier
make:mirae(korea)
year:2012

2-4. anodizing(manual type)-steam boiler 
make:bustar(korea)
year:2012

2-5. anodizing(manual type)-circulation pump 
make:daeyong(korea)
year:2012

2-6. anodizing(manual type)-circulation pump 
make:gumi(korea)
year:2012

2-7 .anodizing(manual type)-control panel 
make:donglak(korea)
year:2012

3-1. buffing line-polishing machine
 make:bando(korea)
year:2012
cap': 4,000ea/day×3ea 
  
3-2. buffing line-dust collector
 make:buza(korea)
year:2012

3-3. buffing line-air comperssor 
make:atlas(usa)

3-4 buffing line-ultranic cleaner
make:uzu(korea)
year:2012 

6. pure water production equipment
make:bosung(korea)
year:2012
cap': 3?/hr  

8. hydraulic press 
make:dongjin(korea)
year:2013
cap': max.20ton  
stroke: 150mm  
open height: 350mm  
bolster size: 700×400mm  
main motor: 3.75kw  
 
10. anodizing line(electro coating)
 make:daehung(korea)
year:2012

11. auto sand blast m/c 
make:hankook(korea)
year:2012
conveyor type  
conveyor: w900mm  
chamber inner size  :1900×1280×915hmm  
gun: 12set  
jet nozzle: ?3.2mm  

14 .auto sand blast m/c 
make:hankook(korea)
year:2012

15. auto sand blast m/c 
make:hankook(korea)
year:2015
main turntable ?650mm  
6multi table  
8nozzle unit  


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

  ANODIZING COATING (ALUMITE COATING) FOR ALUMINIUM PARTS 1. ANODIZING LINE(AUTOMATIC TYPE) MAKE:TAEWON(KOREA) YEAR:2012 CAP': 7,000EA/HOUR 2-1. ANODIZING LINE(MANUAL TYPE) MAKE:CHUNWOO(KOREA) YEAR:2012 2-2. ANODIZING LINE(MANUAL TYPE) MAKE:BEOMYANG(KOREAN) YEAR:2012 2-3. ANODIZING LINE(MANUAL TYPE)-RECTIFIER MAKE:MIRAE(KOREA) YEAR:2012 2-4. ANODIZING(MANUAL TYPE)-STEAM BOILER MAKE:BUSTAR(KOREA) YEAR:2012 2-5. ANODIZING(MANUAL TYPE)-CIRCULATION PUMP MAKE:DAEYONG(KOREA) YEAR:2012 2-6. ANODIZING(MANUAL TYPE)-CIRCULATION PUMP MAKE:GUMI(KOREA) YEAR:2012 2-7 .ANODIZING(MANUAL TYPE)-CONTROL PANEL MAKE:DONGLAK(KOREA) YEAR:2012 3-1. BUFFING LINE-POLISHING MACHINE MAKE:BANDO(KOREA) YEAR:2012 CAP': 4,000EA/DAY×3EA 3-2. BUFFING LINE-DUST COLLECTOR MAKE:BUZA(KOREA) YEAR:2012 3-3. BUFFING LINE-AIR COMPERSSOR MAKE:ATLAS(USA) 3-4 BUFFING LINE-ULTRANIC CLEANER MAKE:UZU(KOREA) YEAR:2012 6. PURE WATER PRODUCTION EQUIPMENT MAKE:BOSUNG(KOREA) YEAR:2012 CAP': 3?/HR 8. HYDRAULIC PRESS MAKE:DONGJIN(KOREA) YEAR:2013 CAP': MAX.20TON STROKE: 150MM OPEN HEIGHT: 350MM BOLSTER SIZE: 700×400MM MAIN MOTOR: 3.75KW 10. ANODIZING LINE(ELECTRO COATING) MAKE:DAEHUNG(KOREA) YEAR:2012 11. AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2012 CONVEYOR TYPE CONVEYOR: W900MM CHAMBER INNER SIZE :1900×1280×915HMM GUN: 12SET JET NOZZLE: ?3.2MM 14 .AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2012 15. AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2015 MAIN TURNTABLE ?650MM 6MULTI TABLE 8NOZZLE UNIT BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-grinder classifier system, make mikropul gmbh, type acm-10, material stainless steel, grinding room size dia. 310mm, fixed hammers, with grinding track, inlet dia. 50mm, feeding with rotating valve, motor 7,5 kw 380 volt , 1,1 kw 220/380 volt, mounted on frame, with switchgear, floorspace ± 3,3 x 2,2 m, total height 2,7 m, weight ± 1600 kg, extra specifications 1x ventilator van tongeren kennemer type s395/3/4800 11kw, 400/690 volt, 1x dosing screw dia. 225mm 0,37 kw, 220/380 volt, 1x dustcollector donaldson tdp675 230 volt, 1x cyclonefilter :van tongeren kennemer type ac850/3.0, 1x cabinet. +++ overhauled +++size reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER CLASSIFIER SYSTEM, MAKE MIKROPUL GMBH, TYPE ACM-10, MATERIAL STAINLESS STEEL, GRINDING ROOM SIZE DIA. 310MM, FIXED HAMMERS, WITH GRINDING TRACK, INLET DIA. 50MM, FEEDING WITH ROTATING VALVE, MOTOR 7,5 KW 380 VOLT , 1,1 KW 220/380 VOLT, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE ± 3,3 X 2,2 M, TOTAL HEIGHT 2,7 M, WEIGHT ± 1600 KG, EXTRA SPECIFICATIONS 1X VENTILATOR VAN TONGEREN KENNEMER TYPE S395/3/4800 11KW, 400/690 VOLT, 1X DOSING SCREW DIA. 225MM 0,37 KW, 220/380 VOLT, 1X DUSTCOLLECTOR DONALDSON TDP675 230 VOLT, 1X CYCLONEFILTER :VAN TONGEREN KENNEMER TYPE AC850/3.0, 1X CABINET. +++ OVERHAULED +++SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 3.600 €
Ubicación: Land-surfacer grinder tacchella type 4am:

-table working surface : 900 x 130 [mm],
-table longitudinal traverse (hydraulic movement) : 400 [mm],
-table traversing speeds (automatic) : 0.1 to 10 [m/min],
-table swivel : 360°,
-wheelhead vertical adjustment : 250 [mm],
-wheehead cross traverse : 200 [mm],
-wheelhead swivel : 360°,
-wheelhead tilting above and bellow the horizontal axis : +/- 20°,
-max wheel diameter when mounted : 200 [mm],
-power supply : 380 [v].

dimensions : 1350 (width) x 1200 (depth) x 1600 (height) [mm]
weight : 1150 kg approx.

equipements included :

-magnetic clamping plate – clamping surface : 350 x 150 [mm],
-complete coolant system,
-a set of norton grinding wheels,
-technical documentation and service/users manual,
-electrical plans.

price : 3,600.00€ vat excl. ex works loading on truck included.

shipping in france and europe is possible.

more details or questions on request. SURFACER GRINDER TACCHELLA TYPE 4AM: -TABLE WORKING SURFACE : 900 X 130 [MM], -TABLE LONGITUDINAL TRAVERSE (HYDRAULIC MOVEMENT) : 400 [MM], -TABLE TRAVERSING SPEEDS (AUTOMATIC) : 0.1 TO 10 [M/MIN], -TABLE SWIVEL : 360°, -WHEELHEAD VERTICAL ADJUSTMENT : 250 [MM], -WHEEHEAD CROSS TRAVERSE : 200 [MM], -WHEELHEAD SWIVEL : 360°, -WHEELHEAD TILTING ABOVE AND BELLOW THE HORIZONTAL AXIS : +/- 20°, -MAX WHEEL DIAMETER WHEN MOUNTED : 200 [MM], -POWER SUPPLY : 380 [V]. DIMENSIONS : 1350 (WIDTH) X 1200 (DEPTH) X 1600 (HEIGHT) [MM] WEIGHT : 1150 KG APPROX. EQUIPEMENTS INCLUDED : -MAGNETIC CLAMPING PLATE – CLAMPING SURFACE : 350 X 150 [MM], -COMPLETE COOLANT SYSTEM, -A SET OF NORTON GRINDING WHEELS, -TECHNICAL DOCUMENTATION AND SERVICE/USERS MANUAL, -ELECTRICAL PLANS. PRICE : 3,600.00€ VAT EXCL. EX WORKS LOADING ON TRUCK INCLUDED. SHIPPING IN FRANCE AND EUROPE IS POSSIBLE. MORE DETAILS OR QUESTIONS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-colloid mill (1x), make brogli (collovelox), no 2121, house material stainless steel, rotor material stainless steel, rotor sizes dia.75-140mm, with hopper 15ltr. dia.400mm, outlet dia.25mm, motor 5,5kw.380/660volt, with switch, floorspace 0,8x0,7m, total height 1,3mcolloid millsgrinders > colloid mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! COLLOID MILL (1X), MAKE BROGLI (COLLOVELOX), NO 2121, HOUSE MATERIAL STAINLESS STEEL, ROTOR MATERIAL STAINLESS STEEL, ROTOR SIZES DIA.75-140MM, WITH HOPPER 15LTR. DIA.400MM, OUTLET DIA.25MM, MOTOR 5,5KW.380/660VOLT, WITH SWITCH, FLOORSPACE 0,8X0,7M, TOTAL HEIGHT 1,3MCOLLOID MILLSGRINDERS > COLLOID MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-dough dividing and knitting machine / head unit model: fortuna km 4

4 rows
weight range from 35 to 80 grams
power max 5300 pieces / hour
spreading belts work direction from left to right
connection 400v,4 kw, 16a-cee plug DOUGH DIVIDING AND KNITTING MACHINE / HEAD UNIT MODEL: FORTUNA KM 4 4 ROWS WEIGHT RANGE FROM 35 TO 80 GRAMS POWER MAX 5300 PIECES / HOUR SPREADING BELTS WORK DIRECTION FROM LEFT TO RIGHT CONNECTION 400V,4 KW, 16A-CEE PLUG
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-grinder victory mill (1x), make hosokawa micron, type vp-4, no 420135, new 1973, material stainless steel, rotor size dia. 630x400mm, fixed hammers (60 flat hammers), hammer width 400mm, with grinding platens, inlet 400x400mm, motor 55 kw, 380 volt, speed 2650 rpm, mounted on frame, floorspace 2,2x1,8 m, total height 1,8 msize reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER VICTORY MILL (1X), MAKE HOSOKAWA MICRON, TYPE VP-4, NO 420135, NEW 1973, MATERIAL STAINLESS STEEL, ROTOR SIZE DIA. 630X400MM, FIXED HAMMERS (60 FLAT HAMMERS), HAMMER WIDTH 400MM, WITH GRINDING PLATENS, INLET 400X400MM, MOTOR 55 KW, 380 VOLT, SPEED 2650 RPM, MOUNTED ON FRAME, FLOORSPACE 2,2X1,8 M, TOTAL HEIGHT 1,8 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-king palettenstã¼pfler, regina
with stã¼pfelkã¤sten
for button rolls, kaiser rolls and star
cars for stã¼pfelkã¤sten
connection 400v, 16a-cee plug
second-hand machine without warranty of KING PALETTENSTüPFLER, REGINA WITH STüPFELKäSTEN FOR BUTTON ROLLS, KAISER ROLLS AND STAR CARS FOR STüPFELKäSTEN CONNECTION 400V, 16A-CEE PLUG SECOND-HAND MACHINE WITHOUT WARRANTY OF
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-AT Austria, 3800 Göpfritz an der Wild
Vendedor: Biringer International GmbH
Año de construcción: usado
Ubicación: Land-lifting tipper w & p
model: hkl 1600
wheels with locking device
suitable for diosna tank car
connection 400v, 16a-cee plug
dimensions: approx. 1300 x 1500 x 2400 mm
used unit without warranty of LIFTING TIPPER W & P MODEL: HKL 1600 WHEELS WITH LOCKING DEVICE SUITABLE FOR DIOSNA TANK CAR CONNECTION 400V, 16A-CEE PLUG DIMENSIONS: APPROX. 1300 X 1500 X 2400 MM USED UNIT WITHOUT WARRANTY OF
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 3350; engine: scania dsc9 66; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 3350; ENGINE: SCANIA DSC9 66; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-palettenstã¼pfler werner & pfleiderer st 78
with stã¼pfelkã¤sten 5 x 7
for kaiser rolls with cars for stã¼pfelkã¤sten
connection 400v, 16a-cee plug
second-hand machine without warranty of PALETTENSTüPFLER WERNER & PFLEIDERER ST 78 WITH STüPFELKäSTEN 5 X 7 FOR KAISER ROLLS WITH CARS FOR STüPFELKäSTEN CONNECTION 400V, 16A-CEE PLUG SECOND-HAND MACHINE WITHOUT WARRANTY OF
Vendedor: Milbrandt GmbH
Año de construcción: usado
Precio: 798.000 €
Ubicación: Land-; mileage [km]: 16202; gross weight [kg]: 72620; registration number: wmg6315h9bz010068; rear tyres remaining: 80; front tyres remaining: 80; lift height[mm]: 6400; maximum lift capacity [kg]: 350000 ; MILEAGE [KM]: 16202; GROSS WEIGHT [KG]: 72620; REGISTRATION NUMBER: WMG6315H9BZ010068; REAR TYRES REMAINING: 80; FRONT TYRES REMAINING: 80; LIFT HEIGHT[MM]: 6400; MAXIMUM LIFT CAPACITY [KG]: 350000
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-kaiserstuepfler
wp comet stã¼pfler
2-row for hand use
weight range 40 to 80 grams / piece
manual operation
retractable outfeed conveyor
checked dguv v3
connection 400v, 1,1 kw, 16a-cee plug
dimensions: 550 x 420 x 530 mm wxdxh
second-hand machine cleaned and checked KAISERSTUEPFLER WP COMET STüPFLER 2-ROW FOR HAND USE WEIGHT RANGE 40 TO 80 GRAMS / PIECE MANUAL OPERATION RETRACTABLE OUTFEED CONVEYOR CHECKED DGUV V3 CONNECTION 400V, 1,1 KW, 16A-CEE PLUG DIMENSIONS: 550 X 420 X 530 MM WXDXH SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-; gross weight [kg]: 18400; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 18400; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-clerk dough divider
bread abwieger 200 to 1250 g hopper 70 kg teflon coated
led display
with central lubrication
machine mobile with 2 stops
long adjustable outfeed conveyor
connection 400v, 16a-cee plug
second-hand machine cleaned and checked CLERK DOUGH DIVIDER BREAD ABWIEGER 200 TO 1250 G HOPPER 70 KG TEFLON COATED LED DISPLAY WITH CENTRAL LUBRICATION MACHINE MOBILE WITH 2 STOPS LONG ADJUSTABLE OUTFEED CONVEYOR CONNECTION 400V, 16A-CEE PLUG SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; rear tyres remaining: 100; front tyres remaining: 100; accessories: leistung (brief):88, bereifung (v):460/70-24, bereifung (h):460/70-24, arbeitsscheinwerfer 4x vorn, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 4000 ; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; ACCESSORIES: LEISTUNG (BRIEF):88, BEREIFUNG (V):460/70-24, BEREIFUNG (H):460/70-24, ARBEITSSCHEINWERFER 4X VORN, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 4000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-sling table
with solid beechwood top
conveyor belt centered
with cross design with hinged pull-out sheet edition
stainless steel execution
table mobile
connection 400v, 16a-cee plug
used equipment reconditioned with warranty SLING TABLE WITH SOLID BEECHWOOD TOP CONVEYOR BELT CENTERED WITH CROSS DESIGN WITH HINGED PULL-OUT SHEET EDITION STAINLESS STEEL EXECUTION TABLE MOBILE CONNECTION 400V, 16A-CEE PLUG USED EQUIPMENT RECONDITIONED WITH WARRANTY
Vendedor: Milbrandt GmbH
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-compact pretzel long roller with cone winder
and feeder universe kasper model: lwt 3/80 premium eb ii w 20 for all poles like kornspitz and fritters, etc. 
universal - suits - winding machine
for all dough to the winding and long roll
long working width 800 mm
the work plate bottom cleaning device
total effective way over 2 levels 2, 5 m
dough deposit of 40-300 grams
stainless steel, bj. 2004
with eb2 feeding device before rolling mill viper
for roll systems with lateral discharge
connection 400v, 16a-cee plug
dimensions: 2200 x 1000 x 1800 mm wxdxh
second-hand machine cleaned and checked COMPACT PRETZEL LONG ROLLER WITH CONE WINDER AND FEEDER UNIVERSE KASPER MODEL: LWT 3/80 PREMIUM EB II W 20 FOR ALL POLES LIKE KORNSPITZ AND FRITTERS, ETC. UNIVERSAL - SUITS - WINDING MACHINE FOR ALL DOUGH TO THE WINDING AND LONG ROLL LONG WORKING WIDTH 800 MM THE WORK PLATE BOTTOM CLEANING DEVICE TOTAL EFFECTIVE WAY OVER 2 LEVELS 2, 5 M DOUGH DEPOSIT OF 40-300 GRAMS STAINLESS STEEL, BJ. 2004 WITH EB2 FEEDING DEVICE BEFORE ROLLING MILL VIPER FOR ROLL SYSTEMS WITH LATERAL DISCHARGE CONNECTION 400V, 16A-CEE PLUG DIMENSIONS: 2200 X 1000 X 1800 MM WXDXH SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-; power [ps]: 116 ; POWER [PS]: 116
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-deck baking oven electric oven

miwe condo c-4-128 as

as control
heat and lower heat individually adjustable
for sheets 600 x 400 and 600 x 800 mm stainless steel
oven with a fermentation room and as control
4 qm baking surface (4 floors 1200 x 800 mm) connection 400v, 43,5 kw, 4 x 32a-cee plug, water connection 3/4 inch
dimensions: 1500 x 1500 x 2000 mm wxdxh
used unit without guarantee for export
DECK BAKING OVEN ELECTRIC OVEN MIWE CONDO C-4-128 AS AS CONTROL HEAT AND LOWER HEAT INDIVIDUALLY ADJUSTABLE FOR SHEETS 600 X 400 AND 600 X 800 MM STAINLESS STEEL OVEN WITH A FERMENTATION ROOM AND AS CONTROL 4 QM BAKING SURFACE (4 FLOORS 1200 X 800 MM) CONNECTION 400V, 43,5 KW, 4 X 32A-CEE PLUG, WATER CONNECTION 3/4 INCH DIMENSIONS: 1500 X 1500 X 2000 MM WXDXH USED UNIT WITHOUT GUARANTEE FOR EXPORT
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-x travel:   1400 mm<br/>y travel:   1000 mm<br/>z travel:    780 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   1400 mm<br/>- y-axis travel:   1000 mm<br/>- z-axis travel:    780 mm<br/>table:  <br/>- table surface (left-right):   1000 mm<br/>- table surface (front-back):   1000 mm<br/>- workpiece load (max):   3000 kg<br/>- rotation axis: c:        <br/>- - positioning/indexing:  0.001 °<br/>milling spindle / head:  <br/>- spindle type: tilting head:        <br/>- - positioning/indexing:    2.5 °<br/>- - positioning/indexing:    2.5 °<br/>- tool fixture: iso sk 50:        <br/>tool magazine:  <br/>- number of positions:     60  <br/>automatic workload equipment:  <br/>- number of store positions:      2  <br/>- pallet length:   1000 mm<br/>- pallet width:   1000 mm<br/>- number of pallets:      2  <br/><br/><br/><br/><br/> X TRAVEL: 1400 MM
Y TRAVEL: 1000 MM
Z TRAVEL: 780 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 1400 MM
- Y-AXIS TRAVEL: 1000 MM
- Z-AXIS TRAVEL: 780 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1000 MM
- TABLE SURFACE (FRONT-BACK): 1000 MM
- WORKPIECE LOAD (MAX): 3000 KG
- ROTATION AXIS: C:
- - POSITIONING/INDEXING: 0.001 °
MILLING SPINDLE / HEAD:
- SPINDLE TYPE: TILTING HEAD:
- - POSITIONING/INDEXING: 2.5 °
- - POSITIONING/INDEXING: 2.5 °
- TOOL FIXTURE: ISO SK 50:
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 60
AUTOMATIC WORKLOAD EQUIPMENT:
- NUMBER OF STORE POSITIONS: 2
- PALLET LENGTH: 1000 MM
- PALLET WIDTH: 1000 MM
- NUMBER OF PALLETS: 2




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-deck baking oven electric oven

miwe condo c-4-68

as control
heat and lower heat individually adjustable
for sheets 600 x 400 and 600 x 800 mm stainless steel
oven with a fermentation room and as control
4 back floors connection 400v, 20.5 kw, 2 x 32a-cee plug, water connection 3/4 inch
dimensions: 900 x 1200 x 2000 mm wxdxh
used unit without guarantee for export DECK BAKING OVEN ELECTRIC OVEN MIWE CONDO C-4-68 AS CONTROL HEAT AND LOWER HEAT INDIVIDUALLY ADJUSTABLE FOR SHEETS 600 X 400 AND 600 X 800 MM STAINLESS STEEL OVEN WITH A FERMENTATION ROOM AND AS CONTROL 4 BACK FLOORS CONNECTION 400V, 20.5 KW, 2 X 32A-CEE PLUG, WATER CONNECTION 3/4 INCH DIMENSIONS: 900 X 1200 X 2000 MM WXDXH USED UNIT WITHOUT GUARANTEE FOR EXPORT
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter:        mm<br/>x travel:   4500 mm<br/>y travel:   1800 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   4500 mm<br/>- y-axis travel:   1800 mm<br/>- z-axis travel:   2000 mm<br/>- w-axis travel:   1000 mm<br/>table:  <br/>- table surface (left-right):   2000 mm<br/>- table surface (front-back):   1400 mm<br/>- workpiece load (max):  10000 kg<br/>tool magazine:  <br/>- number of positions:     60  <br/>automatic workload equipment:  <br/>- store type: table changer:        <br/>- number of store positions:      2  <br/><br/><br/><br/><br/> SPINDLE DIAMETER: MM
X TRAVEL: 4500 MM
Y TRAVEL: 1800 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 4500 MM
- Y-AXIS TRAVEL: 1800 MM
- Z-AXIS TRAVEL: 2000 MM
- W-AXIS TRAVEL: 1000 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 2000 MM
- TABLE SURFACE (FRONT-BACK): 1400 MM
- WORKPIECE LOAD (MAX): 10000 KG
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 60
AUTOMATIC WORKLOAD EQUIPMENT:
- STORE TYPE: TABLE CHANGER:
- NUMBER OF STORE POSITIONS: 2




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-wiesheu convection oven / oven loading
b-08 dibas 2
for 8 trays 60 x 40 cm
is 500 control
with glass door proofer for 16 sheets
mobile, bj. 2008 with extractor hood with steam condenser
400v of 18.4 kw, 32a-cee plug
dimensions: 930 x 980 x 2200 mm wxdxh
used unit cleaned and checked WIESHEU CONVECTION OVEN / OVEN LOADING B-08 DIBAS 2 FOR 8 TRAYS 60 X 40 CM IS 500 CONTROL WITH GLASS DOOR PROOFER FOR 16 SHEETS MOBILE, BJ. 2008 WITH EXTRACTOR HOOD WITH STEAM CONDENSER 400V OF 18.4 KW, 32A-CEE PLUG DIMENSIONS: 930 X 980 X 2200 MM WXDXH USED UNIT CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 650 mm<br/>y-travel: 450 mm<br/>: 140 mm<br/>w-axis (movable cross beam): 500 mm<br/>cnc-control: siemens 840d <br/>workpiece height:  mm<br/>table-size: 770 x 630 mm<br/>voltage: 400 v<br/>table load: max. 500 kg<br/>feed speeds: 0 - 1500 mm/min<br/>rapid traverse: 0 - 3000 m/min<br/>rapid traverse - down: 800 mm/min<br/>grinding spindle speed: 4.500 - 80.000 u/min<br/>cone grinding up to: 16 grad<br/>total power requirement:  kw<br/>weight of the machine ca.: 4,0 t<br/>dimensions of the machine ca.: 2,35 x 2,65 x 2,65 / 3,15 m<br/>round table:  <br/>tool cabinet:  <br/><br/><br/><br/><br/> X-TRAVEL: 650 MM
Y-TRAVEL: 450 MM
: 140 MM
W-AXIS (MOVABLE CROSS BEAM): 500 MM
CNC-CONTROL: SIEMENS 840D
WORKPIECE HEIGHT: MM
TABLE-SIZE: 770 X 630 MM
VOLTAGE: 400 V
TABLE LOAD: MAX. 500 KG
FEED SPEEDS: 0 - 1500 MM/MIN
RAPID TRAVERSE: 0 - 3000 M/MIN
RAPID TRAVERSE - DOWN: 800 MM/MIN
GRINDING SPINDLE SPEED: 4.500 - 80.000 U/MIN
CONE GRINDING UP TO: 16 GRAD
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 4,0 T
DIMENSIONS OF THE MACHINE CA.: 2,35 X 2,65 X 2,65 / 3,15 M
ROUND TABLE:
TOOL CABINET:




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 24.000 €
Ubicación: Land-
machine type machining center - vertical make victor type vc 55 year 2000 control type cnc storage france country of origin taiwan delivery immediately cargo base stock haguenau france technical details

x trail 550 mm y route 460 mm z-way 460 mm table size 800 x 460 mm spindle retainer iso bt 40 spindle unloading 476 mm distance spindle nose and table 150-660 mm workpiece weight of 600 kg max speed range 20-8000 rpm feeds - longitudinal/transverse/vertical 24000 mm / min  
rapid traverse - longitudinal/transverse/vertical 30 m / min number of tool magazine 24 additional information

accessories: coolant system
 cnc control fanuc om-pallet exchange table
 and spaenefoerderer MACHINE TYPE MACHINING CENTER - VERTICAL MAKE VICTOR TYPE VC 55 YEAR 2000 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN TAIWAN DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS X TRAIL 550 MM Y ROUTE 460 MM Z-WAY 460 MM TABLE SIZE 800 X 460 MM SPINDLE RETAINER ISO BT 40 SPINDLE UNLOADING 476 MM DISTANCE SPINDLE NOSE AND TABLE 150-660 MM WORKPIECE WEIGHT OF 600 KG MAX SPEED RANGE 20-8000 RPM FEEDS - LONGITUDINAL/TRANSVERSE/VERTICAL 24000 MM / MIN RAPID TRAVERSE - LONGITUDINAL/TRANSVERSE/VERTICAL 30 M / MIN NUMBER OF TOOL MAGAZINE 24 ADDITIONAL INFORMATION ACCESSORIES: COOLANT SYSTEM CNC CONTROL FANUC OM-PALLET EXCHANGE TABLE AND SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-pressure: 160 t<br/>chamfer lenght: 3050 mm<br/>distance between columns: 2550 mm<br/>control: cybelec dnc 880 s <br/>back stop - adjustable: 620 mm<br/>throat: 350 mm<br/>max. stroke: 200 mm<br/>ajustment speed: 100 mm/sec<br/>working feed: 9 mm/sec<br/>return speed: 86 mm/sec<br/>table width: 104 mm<br/>power requirement: 15 kw<br/>voltage: 400 v<br/>total power requirement: 15 kw<br/>weight of the machine ca.: 9,8 t<br/>dimensions of the machine ca.: 4,00 x 2,20 x 2,60 m<br/>- fab.-no.: 7531105124-e<br/>- control: cybelec dnc 880 s<br/>- cnc-controlled back stop<br/>- foot switch<br/><br/><br/><br/><br/> PRESSURE: 160 T
CHAMFER LENGHT: 3050 MM
DISTANCE BETWEEN COLUMNS: 2550 MM
CONTROL: CYBELEC DNC 880 S
BACK STOP - ADJUSTABLE: 620 MM
THROAT: 350 MM
MAX. STROKE: 200 MM
AJUSTMENT SPEED: 100 MM/SEC
WORKING FEED: 9 MM/SEC
RETURN SPEED: 86 MM/SEC
TABLE WIDTH: 104 MM
POWER REQUIREMENT: 15 KW
VOLTAGE: 400 V
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 9,8 T
DIMENSIONS OF THE MACHINE CA.: 4,00 X 2,20 X 2,60 M
- FAB.-NO.: 7531105124-E
- CONTROL: CYBELEC DNC 880 S
- CNC-CONTROLLED BACK STOP
- FOOT SWITCH




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cnc bed type milling machine fabr.iberimex uh-1250a bj. 2001
control heidenhain tnc124.

procedures: x1250mm y500mm z460mm
clamping table: 360mmx1800mm
spindle retainer: iso50

complete machine housing complete machine documentation available.

machine card see more data. CNC BED TYPE MILLING MACHINE FABR.IBERIMEX UH-1250A BJ. 2001 CONTROL HEIDENHAIN TNC124. PROCEDURES: X1250MM Y500MM Z460MM CLAMPING TABLE: 360MMX1800MM SPINDLE RETAINER: ISO50 COMPLETE MACHINE HOUSING COMPLETE MACHINE DOCUMENTATION AVAILABLE. MACHINE CARD SEE MORE DATA.
Vendedor: IMDAT-WERKZEUGMASCHINENHANDEL
Año de construcción: usado
Precio: 1.022 htt
Ubicación: Land-1 1
Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-brand: guntner
model: gvh 080.2d/4e(d)
power: 178,7 kw (r404a, ?t = 15 k)
version: extremely low noise
year of manufacture: 2006
number of fans: 4 pcs.
fan diameter: 800 mm.
air flow: 39600 m3/h
tube volume: 103,7 +31,5 l.
dimensions: 9,7 / 1,55 / 1 m.
weight: 1095 kg.

  horizontal ?ondenser from the brand guntner, with capacity of 178.7 kw, released in 2006. the air-cooled condenser is versioning extremely low noise. it is cooled by 4 fans with a diameter of 800 mm.

  due to direct supply from germany and the netherlands, our air-cooled condensers have the best prices, allowing you to pay less. 
 BRAND: GUNTNER MODEL: GVH 080.2D/4E(D) POWER: 178,7 KW (R404A, ?T = 15 K) VERSION: EXTREMELY LOW NOISE YEAR OF MANUFACTURE: 2006 NUMBER OF FANS: 4 PCS. FAN DIAMETER: 800 MM. AIR FLOW: 39600 M3/H TUBE VOLUME: 103,7 +31,5 L. DIMENSIONS: 9,7 / 1,55 / 1 M. WEIGHT: 1095 KG. HORIZONTAL ?ONDENSER FROM THE BRAND GUNTNER, WITH CAPACITY OF 178.7 KW, RELEASED IN 2006. THE AIR-COOLED CONDENSER IS VERSIONING EXTREMELY LOW NOISE. IT IS COOLED BY 4 FANS WITH A DIAMETER OF 800 MM. DUE TO DIRECT SUPPLY FROM GERMANY AND THE NETHERLANDS, OUR AIR-COOLED CONDENSERS HAVE THE BEST PRICES, ALLOWING YOU TO PAY LESS.
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 2000 x 1400 x 1500 mm<br/>description: travels (x, y, z): 1000 x 650 x 300 mm<br> con 4º eje<br> controlled with pc + mach3 WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1400 X 1500 MM
DESCRIPTION: TRAVELS (X, Y, Z): 1000 X 650 X 300 MM
CON 4º EJE
CONTROLLED WITH PC + MACH3
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical - cnc machining center hermle c 800 u

with train control heidenhain tnc 430
year of construction: 2004 traverse paths: x 800 y 600 z 500
speed range: 0 - 16,000 rpm continuously (sk 40) with the following accessories:

solid angle table 1000 x 560 mm clamping surface
turn adjuster integrated in the left part of the wall with collet chuck and tailstock
vertical tool changer with 30 magazine places (sk 40)
1 high-speed spindle 50000 rpm
1 high on spindle 70000 rpm
prepared ikz
chip conveyor
3d measuring probe renishaw mp 10
tool breakage detection
electronic handwheel
electronic heat compensation y/z axis
oil mist extraction
chip washing gun
ethernet interface
full cab with sliding door and interior light
coolant system
4 adjustable mounts
operating instructions VERTICAL - CNC MACHINING CENTER HERMLE C 800 U WITH TRAIN CONTROL HEIDENHAIN TNC 430 YEAR OF CONSTRUCTION: 2004 TRAVERSE PATHS: X 800 Y 600 Z 500 SPEED RANGE: 0 - 16,000 RPM CONTINUOUSLY (SK 40) WITH THE FOLLOWING ACCESSORIES: SOLID ANGLE TABLE 1000 X 560 MM CLAMPING SURFACE TURN ADJUSTER INTEGRATED IN THE LEFT PART OF THE WALL WITH COLLET CHUCK AND TAILSTOCK VERTICAL TOOL CHANGER WITH 30 MAGAZINE PLACES (SK 40) 1 HIGH-SPEED SPINDLE 50000 RPM 1 HIGH ON SPINDLE 70000 RPM PREPARED IKZ CHIP CONVEYOR 3D MEASURING PROBE RENISHAW MP 10 TOOL BREAKAGE DETECTION ELECTRONIC HANDWHEEL ELECTRONIC HEAT COMPENSATION Y/Z AXIS OIL MIST EXTRACTION CHIP WASHING GUN ETHERNET INTERFACE FULL CAB WITH SLIDING DOOR AND INTERIOR LIGHT COOLANT SYSTEM 4 ADJUSTABLE MOUNTS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 240 kg<br/>dimensions (l x w x h) approx.: 800 x 1400 x 2400 mm<br/>description: length of tape 51 mts. WEIGHT APPROX.: 240 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1400 X 2400 MM
DESCRIPTION: LENGTH OF TAPE 51 MTS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fomtec ft 400tr2 / vertical injection molding machine with a turntable / hours of operation: 2,000
year of construction: 2012

injection unit:
screw diameter: 32 mm
shot weight: 89 g
injection pressure: 1531 bar
dispensing volume: 97 cc

clamping unit:
clamping force: 40 t
size of the clamping plates: 540 x 480 mm
ejector: hydraulic
clamping unit: hydraulic

control:
touch control

additional equipment:
turntable diameter: dia 800 mm

dimensions:
weight: 2200 kg
length/width/height: 2.1 x 1.4 x 2.5 m

drive:
pump/motor: 5.5 kw
heating capacity: 4.1 kw
total capacity: 9.6 kw

price: on request
FOMTEC FT 400TR2 / VERTICAL INJECTION MOLDING MACHINE WITH A TURNTABLE / HOURS OF OPERATION: 2,000 YEAR OF CONSTRUCTION: 2012 INJECTION UNIT: SCREW DIAMETER: 32 MM SHOT WEIGHT: 89 G INJECTION PRESSURE: 1531 BAR DISPENSING VOLUME: 97 CC CLAMPING UNIT: CLAMPING FORCE: 40 T SIZE OF THE CLAMPING PLATES: 540 X 480 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: TOUCH CONTROL ADDITIONAL EQUIPMENT: TURNTABLE DIAMETER: DIA 800 MM DIMENSIONS: WEIGHT: 2200 KG LENGTH/WIDTH/HEIGHT: 2.1 X 1.4 X 2.5 M DRIVE: PUMP/MOTOR: 5.5 KW HEATING CAPACITY: 4.1 KW TOTAL CAPACITY: 9.6 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 1600 x 1200 x 1500 mm<br/>description: internal reference 164.011, table size 1600 x 400 mm, max. workpiece thickness approx. 105 mm WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1200 X 1500 MM
DESCRIPTION: INTERNAL REFERENCE 164.011, TABLE SIZE 1600 X 400 MM, MAX. WORKPIECE THICKNESS APPROX. 105 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-counter (m): 1.8
format (cm): a5 / a3				
equipment / additional information:
1xhorizon tower vac-100 a (10stations)
1xhorizon tower vac-100 m (10stations)
1xhorizon folding and hefting unit  spf-20 a
1xhorizon trimmer fc-20 a
1xdelivery table + kicker 

  COUNTER (M): 1.8 FORMAT (CM): A5 / A3 EQUIPMENT / ADDITIONAL INFORMATION: 1XHORIZON TOWER VAC-100 A (10STATIONS) 1XHORIZON TOWER VAC-100 M (10STATIONS) 1XHORIZON FOLDING AND HEFTING UNIT SPF-20 A 1XHORIZON TRIMMER FC-20 A 1XDELIVERY TABLE + KICKER
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 2400 x 1200 x 2000 mm<br/>description: 3 press areas, pressing surface each approx. 1100 x 710 mm, pressing process occurs mechanically via hand wheel and spindle WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 1200 X 2000 MM
DESCRIPTION: 3 PRESS AREAS, PRESSING SURFACE EACH APPROX. 1100 X 710 MM, PRESSING PROCESS OCCURS MECHANICALLY VIA HAND WHEEL AND SPINDLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control system: charmilles	
table surface: 500 x 400 mm	
travel distances :	
x: 350 mm	
y: 250 mm	
z: 300 mm	
distance between the table and the spindle: 500 mm	
maximum weight without electrode changer: 50 kg	
maximum workpiece weight: 500 kg	
motor power: 5 kw	
dielectric volume: 350 l	
volts: 380 / hz: 50 / kva: 5	
machine dimensions:	
2050 x 1800 x 1550 mm	
machine weight: 2300 kg	
in 2015/2016 de servis:	
complete machine regulation	
new:	
(c-axis -tft screen - fan - usb flash disk-electric panel)	
heat exchanger for 16 electrodes	
manual  CONTROL SYSTEM: CHARMILLES TABLE SURFACE: 500 X 400 MM TRAVEL DISTANCES : X: 350 MM Y: 250 MM Z: 300 MM DISTANCE BETWEEN THE TABLE AND THE SPINDLE: 500 MM MAXIMUM WEIGHT WITHOUT ELECTRODE CHANGER: 50 KG MAXIMUM WORKPIECE WEIGHT: 500 KG MOTOR POWER: 5 KW DIELECTRIC VOLUME: 350 L VOLTS: 380 / HZ: 50 / KVA: 5 MACHINE DIMENSIONS: 2050 X 1800 X 1550 MM MACHINE WEIGHT: 2300 KG IN 2015/2016 DE SERVIS: COMPLETE MACHINE REGULATION NEW: (C-AXIS -TFT SCREEN - FAN - USB FLASH DISK-ELECTRIC PANEL) HEAT EXCHANGER FOR 16 ELECTRODES MANUAL
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land- cap. approx. 400 lids/h, \r\nlids 495 x 300 mm\r\n\r\n CAP. APPROX. 400 LIDS/H, \R\NLIDS 495 X 300 MM\R\N\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-krauss maffei 80-340 c2
year of construction: 1994
bdz3tbeupm
circuit diagram: 697 1188
circuit diagram: 628 8205
u motors: 400 v
u motors: 400 v
power type: 50 hz
 KRAUSS MAFFEI 80-340 C2 YEAR OF CONSTRUCTION: 1994 BDZ3TBEUPM CIRCUIT DIAGRAM: 697 1188 CIRCUIT DIAGRAM: 628 8205 U MOTORS: 400 V U MOTORS: 400 V POWER TYPE: 50 HZ
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-power on time: 15665 h	
control system: fanuc 0i-md	
table: 1320 x 560 mm	
number of axes: 3	
travel distances:	
x: 1200 mm	
y: 600 mm	
z: 650 mm	
speed range: 8000 rpm	
spindle taper: iso 40	
rapid traverse:	
(x / y / z axes) 30 m/min	
distance from spindle nose to table:	
110 to 750 mm	
max. table load: 1400 kg	
tool changer positions: 32	
max. tool diameter: 80 mm	
max. tool length: 300 mm	
max. tool weight: 18 kg	
machine dimensions:	
3300 x 2615 x 2915 mm	
machine weight: 8200 kg	
accessories:	
cooling centre	
availability: 01.02.2019 POWER ON TIME: 15665 H CONTROL SYSTEM: FANUC 0I-MD TABLE: 1320 X 560 MM NUMBER OF AXES: 3 TRAVEL DISTANCES: X: 1200 MM Y: 600 MM Z: 650 MM SPEED RANGE: 8000 RPM SPINDLE TAPER: ISO 40 RAPID TRAVERSE: (X / Y / Z AXES) 30 M/MIN DISTANCE FROM SPINDLE NOSE TO TABLE: 110 TO 750 MM MAX. TABLE LOAD: 1400 KG TOOL CHANGER POSITIONS: 32 MAX. TOOL DIAMETER: 80 MM MAX. TOOL LENGTH: 300 MM MAX. TOOL WEIGHT: 18 KG MACHINE DIMENSIONS: 3300 X 2615 X 2915 MM MACHINE WEIGHT: 8200 KG ACCESSORIES: COOLING CENTRE AVAILABILITY: 01.02.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-stainless steel, incl. proofer+ suction fan, \r\nbaking chamber:        5 pans   600  x  400 mm\r\nproofing cabinet:      16 pans   600  x  400 mm\r\n STAINLESS STEEL, INCL. PROOFER+ SUCTION FAN, \R\NBAKING CHAMBER: 5 PANS 600 X 400 MM\R\NPROOFING CABINET: 16 PANS 600 X 400 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used revision needed deutz motor (diesel) type tcd2012l042v

103 kw at 2400 rpm

we have a large choice of new and used engines. 
please contact us regarding pricing and availability.
  USED REVISION NEEDED DEUTZ MOTOR (DIESEL) TYPE TCD2012L042V 103 KW AT 2400 RPM WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-stainless steel, incl. light and filter\r\nwidth 3500 mm, depth 1200 mm, height 400 mm STAINLESS STEEL, INCL. LIGHT AND FILTER\R\NWIDTH 3500 MM, DEPTH 1200 MM, HEIGHT 400 MM
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ARISA types: