43 ofertas

Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-equipped with 53 mm guide channels and bar pusher dia. 49 mm x 1680 mm length - it was fitted to takisawa mod. tw2 EQUIPPED WITH 53 MM GUIDE CHANNELS AND BAR PUSHER DIA. 49 MM X 1680 MM LENGTH - IT WAS FITTED TO TAKISAWA MOD. TW2 EQUIPADA CON 53 MM GUÍA DE CANALES Y EMPUJADOR DE DIÁMETRO 49 MM X 1680 MM LONGITUD - DE LA BARRA FUE CABIDO A TAKISAWA MOD. TW2
Vendedor: DE-MA CNC Srl

Alimentadores de varillas more

Año de construcción: usado
Ubicación: Land-turning diameter: max. 390 mm<br/>turning length: max. 424 mm<br/>control: fanuc 18 i-m  (msd 501-ii)<br/>greates pass round over bed: 680 mm<br/>swing dia. over traverse guideway: 510 mm<br/>standard turning dia.: 180 mm<br/>centre distance: 752 mm<br/>main spindle::  <br/>turning speed range - main spindle: 40 - 4.000 min/-1<br/>power capacity - main spindel: 11 / 7,5 kw<br/>spindle bearing diameter: 110 mm<br/>spindle bore: 76 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: 65 mm<br/>spindle nose: jis a2-6 <br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 60 - 6.000 min/-1<br/>power capacity - sub spindle: 7,5 / 5,5 kw<br/>spindle bearing diameter: 80 mm<br/>spindle bore: 43 mm<br/>usable bar diameter: - mm<br/>spindle nose: jis a2-5 <br/>c-axis: 0,001 °<br/>traverses subspindle: b: 505 mm<br/>turret::  <br/>number of turret: 2 <br/>number of toolpositions: 12 + 8 pos.<br/>number of driven toolspositions: 12 + 8 pos.<br/>spindle speed - driven tool stations: max. 3.000 min -1<br/>power capacity driven tool-stations: 1: 6,5 / 4,4 kw<br/>power capacity driven tool-stations: 2: 1,9 / 1,4 kw<br/>shank height for square tool: 25 mm<br/>drill shank diameter: max. 50 mm<br/>turret change time: 0,3 sec.<br/>feeds::  <br/>rapid traverse: x: 18 / z: 24 m/min<br/>feed speeds: max. 24.000 mm/min<br/>tipp feed: 0 - 1.260 mm/min<br/>axis stroke::  <br/>x-axis: 1: 235 (195 + 40) mm<br/>x-axis: 2: 175 (147 + 28) mm<br/>z-axis: 1: 520 mm<br/>z-axis: 2: 490 mm<br/>b-axis: 505 mm<br/>total power requirement: 51 kva<br/>weight of the machine ca.: 5,9 t<br/>dimensions of the machine ca.: 8,5 x 2,5 x 2,2 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>bar feeder interface:  <br/>bar feeder: irco profimat 65.6-196.6 <br/>driven tools: 10x <br/>fixed tool-holders:  <br/>cnc - turning- and millingcenter<br/>mori seiki - zl 200 smc<br/><br/>- main- and subspindle<br/>- two turrets<br/>- tool drive<br/>- barloader irco profimat<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 390 MM
TURNING LENGTH: MAX. 424 MM
CONTROL: FANUC 18 I-M (MSD 501-II)
GREATES PASS ROUND OVER BED: 680 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 510 MM
STANDARD TURNING DIA.: 180 MM
CENTRE DISTANCE: 752 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 40 - 4.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 / 7,5 KW
SPINDLE BEARING DIAMETER: 110 MM
SPINDLE BORE: 76 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: 65 MM
SPINDLE NOSE: JIS A2-6
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 60 - 6.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 7,5 / 5,5 KW
SPINDLE BEARING DIAMETER: 80 MM
SPINDLE BORE: 43 MM
USABLE BAR DIAMETER: - MM
SPINDLE NOSE: JIS A2-5
C-AXIS: 0,001 °
TRAVERSES SUBSPINDLE: B: 505 MM
TURRET::
NUMBER OF TURRET: 2
NUMBER OF TOOLPOSITIONS: 12 + 8 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 + 8 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 3.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1: 6,5 / 4,4 KW
POWER CAPACITY DRIVEN TOOL-STATIONS: 2: 1,9 / 1,4 KW
SHANK HEIGHT FOR SQUARE TOOL: 25 MM
DRILL SHANK DIAMETER: MAX. 50 MM
TURRET CHANGE TIME: 0,3 SEC.
FEEDS::
RAPID TRAVERSE: X: 18 / Z: 24 M/MIN
FEED SPEEDS: MAX. 24.000 MM/MIN
TIPP FEED: 0 - 1.260 MM/MIN
AXIS STROKE::
X-AXIS: 1: 235 (195 + 40) MM
X-AXIS: 2: 175 (147 + 28) MM
Z-AXIS: 1: 520 MM
Z-AXIS: 2: 490 MM
B-AXIS: 505 MM
TOTAL POWER REQUIREMENT: 51 KVA
WEIGHT OF THE MACHINE CA.: 5,9 T
DIMENSIONS OF THE MACHINE CA.: 8,5 X 2,5 X 2,2 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
BAR FEEDER INTERFACE:
BAR FEEDER: IRCO PROFIMAT 65.6-196.6
DRIVEN TOOLS: 10X
FIXED TOOL-HOLDERS:
CNC - TURNING- AND MILLINGCENTER
MORI SEIKI - ZL 200 SMC

- MAIN- AND SUBSPINDLE
- TWO TURRETS
- TOOL DRIVE
- BARLOADER IRCO PROFIMAT




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-stock# ug6234

very little used high shear mixer/granulator made by lodige (germany) model mgtl 10. machine is designed in stainless steel. interchangeable cylindrical vessel with a total capacity of 10 liters and a working volume ranging from 25% to 70% of the volume of mixing chamber. mixer equipped with a three-arm mixing impeller bottom driven by el. motor with the power  2.7 kw, 3000 rpm, and side entry chopper driven by el. motor 0.42 kw, 3000 rpm. the speed of the agitators is fully adjustable. includes additional tulip type agitator, a spray nozzle and watson marlow peristaltic pump with adjustable speed in the range from 3 to 400 rpm and the capacity of about 5.7 to 760 ml / min. mixer passed the fat (factory acceptance test) and the qualification according to the gmp (good manufacturing practice) guidelines. unit includes full technical documentation and spare parts. new in 2014. STOCK# UG6234 VERY LITTLE USED HIGH SHEAR MIXER/GRANULATOR MADE BY LODIGE (GERMANY) MODEL MGTL 10. MACHINE IS DESIGNED IN STAINLESS STEEL. INTERCHANGEABLE CYLINDRICAL VESSEL WITH A TOTAL CAPACITY OF 10 LITERS AND A WORKING VOLUME RANGING FROM 25% TO 70% OF THE VOLUME OF MIXING CHAMBER. MIXER EQUIPPED WITH A THREE-ARM MIXING IMPELLER BOTTOM DRIVEN BY EL. MOTOR WITH THE POWER 2.7 KW, 3000 RPM, AND SIDE ENTRY CHOPPER DRIVEN BY EL. MOTOR 0.42 KW, 3000 RPM. THE SPEED OF THE AGITATORS IS FULLY ADJUSTABLE. INCLUDES ADDITIONAL TULIP TYPE AGITATOR, A SPRAY NOZZLE AND WATSON MARLOW PERISTALTIC PUMP WITH ADJUSTABLE SPEED IN THE RANGE FROM 3 TO 400 RPM AND THE CAPACITY OF ABOUT 5.7 TO 760 ML / MIN. MIXER PASSED THE FAT (FACTORY ACCEPTANCE TEST) AND THE QUALIFICATION ACCORDING TO THE GMP (GOOD MANUFACTURING PRACTICE) GUIDELINES. UNIT INCLUDES FULL TECHNICAL DOCUMENTATION AND SPARE PARTS. NEW IN 2014.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Precio: used machinery auction RESALE 48.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 3500 x 2200 x 2300 mm<br/>description: ycm nt2000 sy bsm80 lathe<br> <br> max. turning length 519 mm<br> max. ducrhmesser 350 mm, standard diameter 265 mm<br> travels: x= 260 mm, y= 100 mm, z= 580 mm, b= 600 mm<br> rapid traverse (x/y/z/,b)= 20/24/10/20 m/min<br> cutting speed 1-10000 mm/min<br> revolver with 12 places, bmt65/vdi40<br> control fanuc type series 18i-tb<br> incl. bar loader manufacturer barload type bsm80, and extensive tools <b>without assembly</b><br> WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2200 X 2300 MM
DESCRIPTION: YCM NT2000 SY BSM80 LATHE

MAX. TURNING LENGTH 519 MM
MAX. DUCRHMESSER 350 MM, STANDARD DIAMETER 265 MM
TRAVELS: X= 260 MM, Y= 100 MM, Z= 580 MM, B= 600 MM
RAPID TRAVERSE (X/Y/Z/,B)= 20/24/10/20 M/MIN
CUTTING SPEED 1-10000 MM/MIN
REVOLVER WITH 12 PLACES, BMT65/VDI40
CONTROL FANUC TYPE SERIES 18I-TB
INCL. BAR LOADER MANUFACTURER BARLOAD TYPE BSM80, AND EXTENSIVE TOOLS WITHOUT ASSEMBLY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make: citizen
model: e32 cnc sliding head lathe
year: 1990
condition: used
machine type: lathe 
location of machine: belgium

machine details
year of manufacture: 1990,
control:mitsubishi,
bar capacity: 32 mm,
main spindle speed: 130-6000 rpm,
with sub spindle,
maximum machining length: 320 mm,
main spindle motor drive: 7.5 hp,
twin c-axis and live tooling,
iemca magazine barloader. MAKE: CITIZEN MODEL: E32 CNC SLIDING HEAD LATHE YEAR: 1990 CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: BELGIUM MACHINE DETAILS YEAR OF MANUFACTURE: 1990, CONTROL:MITSUBISHI, BAR CAPACITY: 32 MM, MAIN SPINDLE SPEED: 130-6000 RPM, WITH SUB SPINDLE, MAXIMUM MACHINING LENGTH: 320 MM, MAIN SPINDLE MOTOR DRIVE: 7.5 HP, TWIN C-AXIS AND LIVE TOOLING, IEMCA MAGAZINE BARLOADER.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 1000 mm<br/>description: rectimat 2 with rectiphase varlogic r6 WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 1000 MM
DESCRIPTION: RECTIMAT 2 WITH RECTIPHASE VARLOGIC R6
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-
description
brand	gpg technicas de panificacion sl
model	gfh-60
id	tr296
status	active
price	1.500 € + vat
year of manufacture	2009
fuel	altele
location	oradea (ro)

gas heat generator for baking ovens gpg gfh-60, 2009, designed for static furnaces from the same manufacturer. heat exchange is based on thermal fluid (marlotherm sh). heat output: max. 80,000 kcal / h, fuel: gas, operating mode: automatic, direct monitoring, max. operating pressure: 4 bars, maximum temperature: 3500c, thermal efficiency: 85-90%. connection type: dn-50 / pn-16 din 2633.

exworks. price is negotiable.

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND GPG TECHNICAS DE PANIFICACION SL MODEL GFH-60 ID TR296 STATUS ACTIVE PRICE 1.500 € + VAT YEAR OF MANUFACTURE 2009 FUEL ALTELE LOCATION ORADEA (RO) GAS HEAT GENERATOR FOR BAKING OVENS GPG GFH-60, 2009, DESIGNED FOR STATIC FURNACES FROM THE SAME MANUFACTURER. HEAT EXCHANGE IS BASED ON THERMAL FLUID (MARLOTHERM SH). HEAT OUTPUT: MAX. 80,000 KCAL / H, FUEL: GAS, OPERATING MODE: AUTOMATIC, DIRECT MONITORING, MAX. OPERATING PRESSURE: 4 BARS, MAXIMUM TEMPERATURE: 3500C, THERMAL EFFICIENCY: 85-90%. CONNECTION TYPE: DN-50 / PN-16 DIN 2633. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 1000 mm<br/>description: rectimat 2 with rectiphase varlogic r6 WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 1000 MM
DESCRIPTION: RECTIMAT 2 WITH RECTIPHASE VARLOGIC R6
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cam controlled multi spindle automatic lathe, used
6 main spindles,
control: siemens s5 plc, electronical trip dog control type „balluff“
gear box for thread milling (2 pieces)
pick up for rear machining in pos. 6, work piece sorting shute,
barloader: iemca-pra 40/33 p -rack type-
coolant pump,
threading clutches, stock stand and reel,     
tooling: could be different like pictures 
partly revised CAM CONTROLLED MULTI SPINDLE AUTOMATIC LATHE, USED 6 MAIN SPINDLES, CONTROL: SIEMENS S5 PLC, ELECTRONICAL TRIP DOG CONTROL TYPE „BALLUFF“ GEAR BOX FOR THREAD MILLING (2 PIECES) PICK UP FOR REAR MACHINING IN POS. 6, WORK PIECE SORTING SHUTE, BARLOADER: IEMCA-PRA 40/33 P -RACK TYPE- COOLANT PUMP, THREADING CLUTCHES, STOCK STAND AND REEL, TOOLING: COULD BE DIFFERENT LIKE PICTURES PARTLY REVISED
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 1000 mm<br/>description: rectimat 2 with rectiphase varlogic r6 WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 1000 MM
DESCRIPTION: RECTIMAT 2 WITH RECTIPHASE VARLOGIC R6
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-bonjour!

merci de prendre le temps de lire notre annonce. 

il s'agit ici d'un moteur à gaz, biogaz ou gaz de décharge, en conteneur. c'est un moteur tout neuf. 0 heure d'opération. 
moteur à gaz jenbacher, cogénération électricité et chaleur, chp. 

nous parlons français, anglais et allemand. n'hésitez pas à prendre contact!

belle journée à vous.   BONJOUR! MERCI DE PRENDRE LE TEMPS DE LIRE NOTRE ANNONCE. IL S'AGIT ICI D'UN MOTEUR à GAZ, BIOGAZ OU GAZ DE DéCHARGE, EN CONTENEUR. C'EST UN MOTEUR TOUT NEUF. 0 HEURE D'OPéRATION. MOTEUR à GAZ JENBACHER, COGéNéRATION éLECTRICITé ET CHALEUR, CHP. NOUS PARLONS FRANçAIS, ANGLAIS ET ALLEMAND. N'HéSITEZ PAS à PRENDRE CONTACT! BELLE JOURNéE à VOUS.
Vendedor: F4energy Ltd
Año de construcción: usado
Ubicación: Land-turning diameter: 26 mm<br/>turning length: 170 mm<br/>control: tx 8i <br/>turning speeds: 6000 u/min<br/>c-axis: 0,001° <br/>turret (x-stations): 12-fach angetrieben<br/>turning speeds: 6000 u/min<br/>gripping station: 26 mm<br/>spindle: 10,7 kw<br/>turning speeds: 6000 u/min<br/>c-axis: 0,001° <br/>number of working hours: 41425 h<br/>chip conveyor: ja / yes kw<br/>coolant tank: resy l<br/>total power requirement: 10,5 kw<br/>weight of the machine ca.: 4 t<br/>dimensions of the machine ca.: 2,4 x 1,6 x 2,2 + lns m<br/>bar loader: lns hydrobar express 226 3m stange<br/>cnc sliding headstock machine traub tnl 26, 1 turret & lns barloader<br/>front working 5 stations<br/>rear working 5 stations<br/><br/><br/><br/><br/> TURNING DIAMETER: 26 MM
TURNING LENGTH: 170 MM
CONTROL: TX 8I
TURNING SPEEDS: 6000 U/MIN
C-AXIS: 0,001°
TURRET (X-STATIONS): 12-FACH ANGETRIEBEN
TURNING SPEEDS: 6000 U/MIN
GRIPPING STATION: 26 MM
SPINDLE: 10,7 KW
TURNING SPEEDS: 6000 U/MIN
C-AXIS: 0,001°
NUMBER OF WORKING HOURS: 41425 H
CHIP CONVEYOR: JA / YES KW
COOLANT TANK: RESY L
TOTAL POWER REQUIREMENT: 10,5 KW
WEIGHT OF THE MACHINE CA.: 4 T
DIMENSIONS OF THE MACHINE CA.: 2,4 X 1,6 X 2,2 + LNS M
BAR LOADER: LNS HYDROBAR EXPRESS 226 3M STANGE
CNC SLIDING HEADSTOCK MACHINE TRAUB TNL 26, 1 TURRET & LNS BARLOADER
FRONT WORKING 5 STATIONS
REAR WORKING 5 STATIONS




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land- bonjour!

il s'agit ici d'un conteneur chp complet. 550kwe et 500kw thermal. echangeur de chaleur à plaques et pompe pour le client. 
cette unité a 60 000 heures d'opération et a été révisée à 100% d'après le calendrier d'entretien de jenbacher.
une décharge de chaleur toute neuve de 700kw a été installée sur le toit, 40 degrés celsius et 37% glycol. décharge thermique et ventilateur à vitesse variable. conteneur de 12 mètres, insonorisé: 75dba à 3 mètres. portes à persiennes motorisées. pièce de contrôle et atelier. escalier menant au toit. jenbacher 312 moteur à gaz. biogaz, gaz de décharge. 

n'hésitez pas à prendre contact! nous parlons français, anglais et allemand. 

merci de votre attention.    BONJOUR! IL S'AGIT ICI D'UN CONTENEUR CHP COMPLET. 550KWE ET 500KW THERMAL. ECHANGEUR DE CHALEUR à PLAQUES ET POMPE POUR LE CLIENT. CETTE UNITé A 60 000 HEURES D'OPéRATION ET A éTé RéVISéE à 100% D'APRèS LE CALENDRIER D'ENTRETIEN DE JENBACHER. UNE DéCHARGE DE CHALEUR TOUTE NEUVE DE 700KW A éTé INSTALLéE SUR LE TOIT, 40 DEGRéS CELSIUS ET 37% GLYCOL. DéCHARGE THERMIQUE ET VENTILATEUR à VITESSE VARIABLE. CONTENEUR DE 12 MèTRES, INSONORISé: 75DBA à 3 MèTRES. PORTES à PERSIENNES MOTORISéES. PIèCE DE CONTRôLE ET ATELIER. ESCALIER MENANT AU TOIT. JENBACHER 312 MOTEUR à GAZ. BIOGAZ, GAZ DE DéCHARGE. N'HéSITEZ PAS à PRENDRE CONTACT! NOUS PARLONS FRANçAIS, ANGLAIS ET ALLEMAND. MERCI DE VOTRE ATTENTION.
Vendedor: F4energy Ltd
Año de construcción: usado
Ubicación: Land-turning diameter: 280 mm<br/>turning length: 400 mm<br/>control: smooth c <br/>swing dia. for chucking work: 580 mm<br/>c-axis: 0,001 0<br/>bar material dia.: 52 mm<br/>travel -x axis: 190 mm<br/>travel -z axis: 515 mm<br/>chucking diameter: 152 (6) mm<br/>turning speeds: 6000 u/min<br/>drive capacity - spindle motor: 22 kw<br/>turret (x-stations): 12 <br/>milling spindle drive: 5,5 (40% ed) kw<br/>load magazine: irco ils-muk-7016-ii <br/>number of working hours: 2000 h<br/>tail stock: ja / yes <br/>total power requirement: 32 kw<br/>weight of the machine ca.: 4,5 t<br/>dimensions of the machine ca.: 3,3x1,8x1,7 m<br/>cnc lathe mazak quickturn qt 100m sg, built 2017, with irco ils barloader.<br/><br/><br/><br/><br/> TURNING DIAMETER: 280 MM
TURNING LENGTH: 400 MM
CONTROL: SMOOTH C
SWING DIA. FOR CHUCKING WORK: 580 MM
C-AXIS: 0,001 0
BAR MATERIAL DIA.: 52 MM
TRAVEL -X AXIS: 190 MM
TRAVEL -Z AXIS: 515 MM
CHUCKING DIAMETER: 152 (6) MM
TURNING SPEEDS: 6000 U/MIN
DRIVE CAPACITY - SPINDLE MOTOR: 22 KW
TURRET (X-STATIONS): 12
MILLING SPINDLE DRIVE: 5,5 (40% ED) KW
LOAD MAGAZINE: IRCO ILS-MUK-7016-II
NUMBER OF WORKING HOURS: 2000 H
TAIL STOCK: JA / YES
TOTAL POWER REQUIREMENT: 32 KW
WEIGHT OF THE MACHINE CA.: 4,5 T
DIMENSIONS OF THE MACHINE CA.: 3,3X1,8X1,7 M
CNC LATHE MAZAK QUICKTURN QT 100M SG, BUILT 2017, WITH IRCO ILS BARLOADER.




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-make: eubama
model: s20 rotary transfer
year: 1993
condition: used
machine type: other 
location of machine: germany

all machines are equipped exactly the same.

station 1: sawing unit,
station 2: turning unit,
station 3: double drilling unit (nc-axis),
station 4: drilling unit,
station 5: invertor (nc-axis),
station 6: turning unit,
station 7: turning unit (nc-axis),
station 8: face cutting unit (nc-2 acis),
station 9: turning unit,
station 10: drilling unit (broaching square),

all 3 machines have swarf conveyor + iemca ts 560 barloaders.
most of the unit were bought from eubama new between 1998 and 2004.
there are 5 extra milling units and 14 pallets of spares and more attachments.  MAKE: EUBAMA MODEL: S20 ROTARY TRANSFER YEAR: 1993 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: GERMANY ALL MACHINES ARE EQUIPPED EXACTLY THE SAME. STATION 1: SAWING UNIT, STATION 2: TURNING UNIT, STATION 3: DOUBLE DRILLING UNIT (NC-AXIS), STATION 4: DRILLING UNIT, STATION 5: INVERTOR (NC-AXIS), STATION 6: TURNING UNIT, STATION 7: TURNING UNIT (NC-AXIS), STATION 8: FACE CUTTING UNIT (NC-2 ACIS), STATION 9: TURNING UNIT, STATION 10: DRILLING UNIT (BROACHING SQUARE), ALL 3 MACHINES HAVE SWARF CONVEYOR + IEMCA TS 560 BARLOADERS. MOST OF THE UNIT WERE BOUGHT FROM EUBAMA NEW BETWEEN 1998 AND 2004. THERE ARE 5 EXTRA MILLING UNITS AND 14 PALLETS OF SPARES AND MORE ATTACHMENTS.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-greates pass round over bed:460 mm<br/>swing diameter over bed slide:290 mm<br/>spindle bore:65 mm<br/>y-axis:80 mm<br/>centre distance:580 mm<br/>control:fanuc  18t-itb <br/>spindle turning speed - stepless:4000 1/min<br/>turret head:2 x 12 vdi 30 pos.<br/>rotational speed range of tools:3000 1/min<br/>rapid power traverse in x-and z direction:24 / 30 m/min<br/>total connected load:60 kva<br/>weight of the machine ca.:5,5 t<br/>dimensions of the machine ca.:3,1 x 2,35 x 2,25 m<br/><br/>turning center with y-axis, 6 live tools per turret, subspindel, c-axis, y-axis, chipconveyor, barloader fmb turbo 10-72, no accessories,  approx. 62.800h \ GREATES PASS ROUND OVER BED:460 MM
SWING DIAMETER OVER BED SLIDE:290 MM
SPINDLE BORE:65 MM
Y-AXIS:80 MM
CENTRE DISTANCE:580 MM
CONTROL:FANUC 18T-ITB
SPINDLE TURNING SPEED - STEPLESS:4000 1/MIN
TURRET HEAD:2 X 12 VDI 30 POS.
ROTATIONAL SPEED RANGE OF TOOLS:3000 1/MIN
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:24 / 30 M/MIN
TOTAL CONNECTED LOAD:60 KVA
WEIGHT OF THE MACHINE CA.:5,5 T
DIMENSIONS OF THE MACHINE CA.:3,1 X 2,35 X 2,25 M

TURNING CENTER WITH Y-AXIS, 6 LIVE TOOLS PER TURRET, SUBSPINDEL, C-AXIS, Y-AXIS, CHIPCONVEYOR, BARLOADER FMB TURBO 10-72, NO ACCESSORIES, APPROX. 62.800H \"MACHINE ON\", APPROX 29.500H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-make: miyano
model: ls-18s cnc sliding head lathe
year: 1995
condition: used
machine type: lathe 
location of machine: switzerland 
condition info: good working condition

machine details
year of manufacture: approx 1995,
control: fanuc 18t
with live tools,
lns hydrobar mini sprint magazine barloader
good working condition    MAKE: MIYANO MODEL: LS-18S CNC SLIDING HEAD LATHE YEAR: 1995 CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: SWITZERLAND CONDITION INFO: GOOD WORKING CONDITION MACHINE DETAILS YEAR OF MANUFACTURE: APPROX 1995, CONTROL: FANUC 18T WITH LIVE TOOLS, LNS HYDROBAR MINI SPRINT MAGAZINE BARLOADER GOOD WORKING CONDITION
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-turning diameter:200 mm<br/>turning length:1.130 / 810 mm<br/>control:msx 701 iii mapps iii <br/>max. bar capacity:52 mm<br/>spindle bore:61 mm<br/>travel -x axis:210 mm<br/>travel -z axis:810 mm<br/>travel -y axis:+65, -45 mm<br/>spindle taper:a2-5 <br/>speeds spindle 1:6000 u/min<br/>speeds spindle 2:6000 1/min<br/>c - axis:0,001 °<br/>no. of tools in turret 1:16 <br/>no. of tools in turret 2:16 <br/>shaft cross cut:20 x 20 mm<br/>shank diameter:32 mm<br/>turret change time:0,18 s<br/>max. spindle speed driven tools:6000 min-1<br/>rapid power traverse in x-and z direction:30/50 m/min<br/>drive capacity - spindle motor:22 / 18 kw<br/>power capacity - driven tools:7,5 / 5,5 kw<br/>swing diameter over face slide:320 mm<br/>total power requirement:83 kva<br/>weight of the machine ca.:8,3 t<br/>dimensions of the machine ca.:3,95 x 2,73 x 2,33 m<br/><br/>cnc - lathe with 2 turrets, 2x y-axis and subspindle,  y - axis 110mm, c-axis, kitagawa 6,  3-jaw chuck on main- and subspindle, internal coolant supply 20bar, parts catcher for main- and subspindle, barloader, chipconveyor,  approx. 24.000h \ TURNING DIAMETER:200 MM
TURNING LENGTH:1.130 / 810 MM
CONTROL:MSX 701 III MAPPS III
MAX. BAR CAPACITY:52 MM
SPINDLE BORE:61 MM
TRAVEL -X AXIS:210 MM
TRAVEL -Z AXIS:810 MM
TRAVEL -Y AXIS:+65, -45 MM
SPINDLE TAPER:A2-5
SPEEDS SPINDLE 1:6000 U/MIN
SPEEDS SPINDLE 2:6000 1/MIN
C - AXIS:0,001 °
NO. OF TOOLS IN TURRET 1:16
NO. OF TOOLS IN TURRET 2:16
SHAFT CROSS CUT:20 X 20 MM
SHANK DIAMETER:32 MM
TURRET CHANGE TIME:0,18 S
MAX. SPINDLE SPEED DRIVEN TOOLS:6000 MIN-1
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:30/50 M/MIN
DRIVE CAPACITY - SPINDLE MOTOR:22 / 18 KW
POWER CAPACITY - DRIVEN TOOLS:7,5 / 5,5 KW
SWING DIAMETER OVER FACE SLIDE:320 MM
TOTAL POWER REQUIREMENT:83 KVA
WEIGHT OF THE MACHINE CA.:8,3 T
DIMENSIONS OF THE MACHINE CA.:3,95 X 2,73 X 2,33 M

CNC - LATHE WITH 2 TURRETS, 2X Y-AXIS AND SUBSPINDLE, Y - AXIS 110MM, C-AXIS, KITAGAWA 6, 3-JAW CHUCK ON MAIN- AND SUBSPINDLE, INTERNAL COOLANT SUPPLY 20BAR, PARTS CATCHER FOR MAIN- AND SUBSPINDLE, BARLOADER, CHIPCONVEYOR, APPROX. 24.000H \"MACHINE ON\", APPROX. 9.800H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-turning diameter:200 mm<br/>turning length:1.130 / 810 mm<br/>control:msx 701 iii mapps iii <br/>max. bar capacity:52 mm<br/>spindle bore:61 mm<br/>travel -x axis:210 mm<br/>travel -z axis:810 mm<br/>travel -y axis:+65, -45 mm<br/>spindle taper:a2-5 <br/>speeds spindle 1:6000 u/min<br/>speeds spindle 2:6000 1/min<br/>c - axis:0,001 °<br/>no. of tools in turret 1:16 <br/>no. of tools in turret 2:16 <br/>shaft cross cut:20 x 20 mm<br/>shank diameter:32 mm<br/>turret change time:0,18 s<br/>max. spindle speed driven tools:6000 min-1<br/>rapid power traverse in x-and z direction:30/50 m/min<br/>drive capacity - spindle motor:22 / 18 kw<br/>power capacity - driven tools:7,5 / 5,5 kw<br/>swing diameter over face slide:320 mm<br/>total power requirement:83 kva<br/>weight of the machine ca.:8,3 t<br/>dimensions of the machine ca.:3,95 x 2,73 x 2,33 m<br/><br/>cnc - lathe with 2 turrets, 2x y-axis and subspindle,  y - axis 110mm, c-axis, kitagawa 6,  3-jaw chuck on main- and subspindle, internal coolant supply 20bar, parts catcher for main- and subspindle, barloader, chipconveyor,  approx. 24.000h \ TURNING DIAMETER:200 MM
TURNING LENGTH:1.130 / 810 MM
CONTROL:MSX 701 III MAPPS III
MAX. BAR CAPACITY:52 MM
SPINDLE BORE:61 MM
TRAVEL -X AXIS:210 MM
TRAVEL -Z AXIS:810 MM
TRAVEL -Y AXIS:+65, -45 MM
SPINDLE TAPER:A2-5
SPEEDS SPINDLE 1:6000 U/MIN
SPEEDS SPINDLE 2:6000 1/MIN
C - AXIS:0,001 °
NO. OF TOOLS IN TURRET 1:16
NO. OF TOOLS IN TURRET 2:16
SHAFT CROSS CUT:20 X 20 MM
SHANK DIAMETER:32 MM
TURRET CHANGE TIME:0,18 S
MAX. SPINDLE SPEED DRIVEN TOOLS:6000 MIN-1
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:30/50 M/MIN
DRIVE CAPACITY - SPINDLE MOTOR:22 / 18 KW
POWER CAPACITY - DRIVEN TOOLS:7,5 / 5,5 KW
SWING DIAMETER OVER FACE SLIDE:320 MM
TOTAL POWER REQUIREMENT:83 KVA
WEIGHT OF THE MACHINE CA.:8,3 T
DIMENSIONS OF THE MACHINE CA.:3,95 X 2,73 X 2,33 M

CNC - LATHE WITH 2 TURRETS, 2X Y-AXIS AND SUBSPINDLE, Y - AXIS 110MM, C-AXIS, KITAGAWA 6, 3-JAW CHUCK ON MAIN- AND SUBSPINDLE, INTERNAL COOLANT SUPPLY 20BAR, PARTS CATCHER FOR MAIN- AND SUBSPINDLE, BARLOADER, CHIPCONVEYOR, APPROX. 24.000H \"MACHINE ON\", APPROX. 9.800H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-DE Germany, 42699 Solingen
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-6 main spindles, electronic trip dog control “balluff”, pick up for rear machining, threading clutches, independent feed in cross pos. 2 and 4, interface for barloader iemca pra enclosed, coolant pump, additional coolant pump with magnetic candle filter
[optional: cleaning and revising]   6 MAIN SPINDLES, ELECTRONIC TRIP DOG CONTROL “BALLUFF”, PICK UP FOR REAR MACHINING, THREADING CLUTCHES, INDEPENDENT FEED IN CROSS POS. 2 AND 4, INTERFACE FOR BARLOADER IEMCA PRA ENCLOSED, COOLANT PUMP, ADDITIONAL COOLANT PUMP WITH MAGNETIC CANDLE FILTER [OPTIONAL: CLEANING AND REVISING]
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Precio: 120 €
Ubicación: Land-peristaltic pump ismatec msc-wm5
supply: 220v, 40 w, 50 hz

or 
peristaltic pump watson marlow 502 s
supply: 220 - 240 v, 50 - 60 hz
power input: 150 va
max. rpm: 170
dimension: 18 x 30 x 12,5 cm

or
peristaltic pump ismatec mv-ca

many pumps available  PERISTALTIC PUMP ISMATEC MSC-WM5 SUPPLY: 220V, 40 W, 50 HZ OR PERISTALTIC PUMP WATSON MARLOW 502 S SUPPLY: 220 - 240 V, 50 - 60 HZ POWER INPUT: 150 VA MAX. RPM: 170 DIMENSION: 18 X 30 X 12,5 CM OR PERISTALTIC PUMP ISMATEC MV-CA MANY PUMPS AVAILABLE
Vendedor: EBSEOS GmbH
Año de construcción: usado
Ubicación: Land-cnc tube profiling - production line for isolation tubesextremely quiet cutting system / user-friendlyincl: decoilercut to lenghtcoiler straightening CNC TUBE PROFILING - PRODUCTION LINE FOR ISOLATION TUBESEXTREMELY QUIET CUTTING SYSTEM / USER-FRIENDLYINCL: DECOILERCUT TO LENGHTCOILER STRAIGHTENING
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-e9034 marpos E9034 MARPOS
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-stock number: ug6044
used fluid bed dryer line for production coated granules. line consist of:
- stainless steel (aisi 316) mixing tank with volume 1 m3 for coating liquid preparation. 
- peristaltic dosing pump by watson marlow for feeding coating liquid. working output up to 80 l/h, driven by electric motor 0.18 kw and is equipped with flow meter by krohne.
- two powder container mounted on scale for preparing doses of powder. each container with volume 1.2 m3. designed in stainless steel (aisi 316). includes weighting cells.
- rotary valves (2 pcs) for dosing a powder into fluid bed dryer. equipped with frequency converters. bigger valve has output up to 750 kg/h and is driven by 0.55 kw electric motor, smaller has output up to 150 kg/h and is driven by 0.18 kw electric motor.
- air filter for incoming air - air flow 15000 nm3/h, pressure drop  300 pa.
- steam heater for air heating by klima - steam pressure 4 bars, heating capacity 433 kw, working temperature of air - up to 200c.
- blower fan with silencer designed by klima. air flow - up to 15000 nm3/h, pressure 7500 pa. driven by electric motor 75 kw. equipped with frequency converter and air flow measurement device.
- fluid bed dryer by buehler with coating nozzles (8 pcs). can be used as continous work mode and as a batch type as well. air flow 10000 nm3/h, working temperature of air up to 200c. contact parts designed in stainless steel (aisi 316). drying surface 1 m2. dryer is equipped with temperature of product measurement devices (4 pcs), pressure difference measurement devices (2 pcs), inlet air temperature measurement and regulation, flow indicator for coating liquid on each nozzle, measurement and regulation of general flow of coating liquid.
- cyclone for exhaust air cleaning. designed for air flow up to 15000 m3/h. material stainless steel. equipped with rotary valve - output 50 kg/h, driven by 0.18 kw motor.
- silos for final product - vertical, volume 50 m3, designed in stainless steel.       STOCK NUMBER: UG6044 USED FLUID BED DRYER LINE FOR PRODUCTION COATED GRANULES. LINE CONSIST OF: - STAINLESS STEEL (AISI 316) MIXING TANK WITH VOLUME 1 M3 FOR COATING LIQUID PREPARATION. - PERISTALTIC DOSING PUMP BY WATSON MARLOW FOR FEEDING COATING LIQUID. WORKING OUTPUT UP TO 80 L/H, DRIVEN BY ELECTRIC MOTOR 0.18 KW AND IS EQUIPPED WITH FLOW METER BY KROHNE. - TWO POWDER CONTAINER MOUNTED ON SCALE FOR PREPARING DOSES OF POWDER. EACH CONTAINER WITH VOLUME 1.2 M3. DESIGNED IN STAINLESS STEEL (AISI 316). INCLUDES WEIGHTING CELLS. - ROTARY VALVES (2 PCS) FOR DOSING A POWDER INTO FLUID BED DRYER. EQUIPPED WITH FREQUENCY CONVERTERS. BIGGER VALVE HAS OUTPUT UP TO 750 KG/H AND IS DRIVEN BY 0.55 KW ELECTRIC MOTOR, SMALLER HAS OUTPUT UP TO 150 KG/H AND IS DRIVEN BY 0.18 KW ELECTRIC MOTOR. - AIR FILTER FOR INCOMING AIR - AIR FLOW 15000 NM3/H, PRESSURE DROP 300 PA. - STEAM HEATER FOR AIR HEATING BY KLIMA - STEAM PRESSURE 4 BARS, HEATING CAPACITY 433 KW, WORKING TEMPERATURE OF AIR - UP TO 200C. - BLOWER FAN WITH SILENCER DESIGNED BY KLIMA. AIR FLOW - UP TO 15000 NM3/H, PRESSURE 7500 PA. DRIVEN BY ELECTRIC MOTOR 75 KW. EQUIPPED WITH FREQUENCY CONVERTER AND AIR FLOW MEASUREMENT DEVICE. - FLUID BED DRYER BY BUEHLER WITH COATING NOZZLES (8 PCS). CAN BE USED AS CONTINOUS WORK MODE AND AS A BATCH TYPE AS WELL. AIR FLOW 10000 NM3/H, WORKING TEMPERATURE OF AIR UP TO 200C. CONTACT PARTS DESIGNED IN STAINLESS STEEL (AISI 316). DRYING SURFACE 1 M2. DRYER IS EQUIPPED WITH TEMPERATURE OF PRODUCT MEASUREMENT DEVICES (4 PCS), PRESSURE DIFFERENCE MEASUREMENT DEVICES (2 PCS), INLET AIR TEMPERATURE MEASUREMENT AND REGULATION, FLOW INDICATOR FOR COATING LIQUID ON EACH NOZZLE, MEASUREMENT AND REGULATION OF GENERAL FLOW OF COATING LIQUID. - CYCLONE FOR EXHAUST AIR CLEANING. DESIGNED FOR AIR FLOW UP TO 15000 M3/H. MATERIAL STAINLESS STEEL. EQUIPPED WITH ROTARY VALVE - OUTPUT 50 KG/H, DRIVEN BY 0.18 KW MOTOR. - SILOS FOR FINAL PRODUCT - VERTICAL, VOLUME 50 M3, DESIGNED IN STAINLESS STEEL.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-fully automatic capsule sealing machine. incl. plc: siemens-s5, type: 954, operating controll: lauer pcs 095. format part for capsule size. 3. output: up to 100'000 capsules/h. furthermore incl. visco system trawid vm, sensor o.b.d, control h, no. 04712479. the controll device is self made (comp. wetzel). gelatin-vessel is a2/ double jacket, heatable with ika stirrer rw 16- basic incl. agitator opti- color, pump watson - marlow 505 s, two forward- and two backward pipe. FULLY AUTOMATIC CAPSULE SEALING MACHINE. INCL. PLC: SIEMENS-S5, TYPE: 954, OPERATING CONTROLL: LAUER PCS 095. FORMAT PART FOR CAPSULE SIZE. 3. OUTPUT: UP TO 100'000 CAPSULES/H. FURTHERMORE INCL. VISCO SYSTEM TRAWID VM, SENSOR O.B.D, CONTROL H, NO. 04712479. THE CONTROLL DEVICE IS SELF MADE (COMP. WETZEL). GELATIN-VESSEL IS A2/ DOUBLE JACKET, HEATABLE WITH IKA STIRRER RW 16- BASIC INCL. AGITATOR OPTI- COLOR, PUMP WATSON - MARLOW 505 S, TWO FORWARD- AND TWO BACKWARD PIPE.
Vendedor: UNIGROUP AG
Año de construcción: usado
Ubicación: Land-3-claw forkart with individual demountable claws 4-claw camlock 1 following + 1 fixed steady cooling pump toolholder multifix incl. 5 holders rapid traverse (longitudinal & transversal) +worklight max deplacement small wagon: 145 mm max dwarsverplaatsing 320 mm tegenpunt dia 75 mm tegenpuntverplaatsing 150 mm tegenpunt conus mk 5 3-CLAW FORKART WITH INDIVIDUAL DEMOUNTABLE CLAWS 4-CLAW CAMLOCK 1 FOLLOWING + 1 FIXED STEADY COOLING PUMP TOOLHOLDER MULTIFIX INCL. 5 HOLDERS RAPID TRAVERSE (LONGITUDINAL & TRANSVERSAL) +WORKLIGHT MAX DEPLACEMENT SMALL WAGON: 145 MM MAX DWARSVERPLAATSING 320 MM TEGENPUNT DIA 75 MM TEGENPUNTVERPLAATSING 150 MM TEGENPUNT CONUS MK 5
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-taiwan quality!!! manual ram adjustment y: 456 mm 3 motoric feeds (x, y & z)milling head feeds: 0,003 - 0,0061,5 spindle speeds: automatic electrical adjustedauto tightening spindlespecial promopack!!contains everything you need to start milling immediatly> extra milling iso30-holders with 6 collets> clampingpieces with t-bolts> 1 vice (jaw width 130mm)> 1 set of pads for vice> 1 reduction neck cone 3> milling set 2 mm >< 20 mm> milling set 6 mm >< 20 mm TAIWAN QUALITY!!! MANUAL RAM ADJUSTMENT Y: 456 MM 3 MOTORIC FEEDS (X, Y & Z)MILLING HEAD FEEDS: 0,003 - 0,0061,5 SPINDLE SPEEDS: AUTOMATIC ELECTRICAL ADJUSTEDAUTO TIGHTENING SPINDLESPECIAL PROMOPACK!!CONTAINS EVERYTHING YOU NEED TO START MILLING IMMEDIATLY> EXTRA MILLING ISO30-HOLDERS WITH 6 COLLETS> CLAMPINGPIECES WITH T-BOLTS> 1 VICE (JAW WIDTH 130MM)> 1 SET OF PADS FOR VICE> 1 REDUCTION NECK CONE 3> MILLING SET 2 MM >< 20 MM> MILLING SET 6 MM >< 20 MM
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-movable cylinderelectro hydraulic two speed: fast & slow with manual handle for precision pressing MOVABLE CYLINDERELECTRO HYDRAULIC TWO SPEED: FAST & SLOW WITH MANUAL HANDLE FOR PRECISION PRESSING
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-2 in one: normal abrasive band grinding & pipe grindingmin pipe dia: 20 mmmax pipe dia: 76 mmwidth of the sandingbelt: 100 mmstandard equipment: 42 mm rol 2 IN ONE: NORMAL ABRASIVE BAND GRINDING & PIPE GRINDINGMIN PIPE DIA: 20 MMMAX PIPE DIA: 76 MMWIDTH OF THE SANDINGBELT: 100 MMSTANDARD EQUIPMENT: 42 MM ROL
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-gear driven with grease lubricationdigital readout for rpmelectric spindlefeed with clutchce-certified GEAR DRIVEN WITH GREASE LUBRICATIONDIGITAL READOUT FOR RPMELECTRIC SPINDLEFEED WITH CLUTCHCE-CERTIFIED
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-3-claw forkart with individual demountable claws 4-claw camlock 1 following + 1 fixed steady cooling pump toolholder multifix incl. 5 holders rapid traverse (longitudinal & transversal) +worklight max deplacement small wagon: 145 mm max dwarsverplaatsing 320 mm tegenpunt dia 75 mm tegenpuntverplaatsing 150 mm tegenpunt conus mk 5 3-CLAW FORKART WITH INDIVIDUAL DEMOUNTABLE CLAWS 4-CLAW CAMLOCK 1 FOLLOWING + 1 FIXED STEADY COOLING PUMP TOOLHOLDER MULTIFIX INCL. 5 HOLDERS RAPID TRAVERSE (LONGITUDINAL & TRANSVERSAL) +WORKLIGHT MAX DEPLACEMENT SMALL WAGON: 145 MM MAX DWARSVERPLAATSING 320 MM TEGENPUNT DIA 75 MM TEGENPUNTVERPLAATSING 150 MM TEGENPUNT CONUS MK 5
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-bending examples: - 100 mm width x 20 mm thickness- 120 mm width x 15 mm thicknessmin axis base between mobile and fixed pins: 110 mmmax axis base between mobie and fixed pins: 310 mmstandard equipment: v-90 BENDING EXAMPLES: - 100 MM WIDTH X 20 MM THICKNESS- 120 MM WIDTH X 15 MM THICKNESSMIN AXIS BASE BETWEEN MOBILE AND FIXED PINS: 110 MMMAX AXIS BASE BETWEEN MOBIE AND FIXED PINS: 310 MMSTANDARD EQUIPMENT: V-90
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-conical bending CONICAL BENDING
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-conical bendingwith hardened rolls CONICAL BENDINGWITH HARDENED ROLLS
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-available from stock: a set of soft chuck jaws for our arlo lathesprice on demand, contact us by email or phone. AVAILABLE FROM STOCK: A SET OF SOFT CHUCK JAWS FOR OUR ARLO LATHESPRICE ON DEMAND, CONTACT US BY EMAIL OR PHONE.
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-with both manual and foot control WITH BOTH MANUAL AND FOOT CONTROL
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-manual clampingl + r sawing MANUAL CLAMPINGL + R SAWING
Vendedor: APT International
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ARLO types: