930 ofertas

Año de construcción: usado
Ubicación: Land-printing machine carint carraro 4+0 colours 
year 1990. 
printing width: max. 700mm---web width-max 750mm
reel diameter: unwind 1000mm----rewind 1000mm
core size: 70-76mm 
printing range: 320 mm  max 900mm
electric supply: 220volts-50 hz – 3 phase
materials to be printed: paper from 40 to 100 gsm
printing speed: up to 150 m/min
you can print on paper such as: lwc-mwc-sc-craft paper and many more. 
in very good condition. 
suited for finer gift-wrapping paper and flower-wrapping paper.
PRINTING MACHINE CARINT CARRARO 4+0 COLOURS YEAR 1990. PRINTING WIDTH: MAX. 700MM---WEB WIDTH-MAX 750MM REEL DIAMETER: UNWIND 1000MM----REWIND 1000MM CORE SIZE: 70-76MM PRINTING RANGE: 320 MM MAX 900MM ELECTRIC SUPPLY: 220VOLTS-50 HZ – 3 PHASE MATERIALS TO BE PRINTED: PAPER FROM 40 TO 100 GSM PRINTING SPEED: UP TO 150 M/MIN YOU CAN PRINT ON PAPER SUCH AS: LWC-MWC-SC-CRAFT PAPER AND MANY MORE. IN VERY GOOD CONDITION. SUITED FOR FINER GIFT-WRAPPING PAPER AND FLOWER-WRAPPING PAPER.
Vendedor: Palm Brokers
Año de construcción: usado
Ubicación: Land-manufacturer anis trend d.o.o.<br/>type ats110-75d 60 tons <br/>year of construction 2019<br/>hours of operation 52 hours<br/>press power main press 59 tons<br/>specific press capacity 71 n/cm²<br/>bale density with material cardboard approx.450 kg/m³<br/>bale density with material pet- and hdpe bottles approx. 280 up to 320 kg/m³<br/>feed hopper 1,600 x 1,040 mm<br/>capacity per cycle 2,13 m³<br/>theoretic cycle time 10,7 sec.<br/>cycle time under operating conditions approx. 20 sec.<br/>theoretic throughput rate 441 m³/hour<br/>throughput rate under operating conditions approx. 235 m³/hour  <br/>bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l)<br/>driving motor 45 kw<br/>oil cooler 1,5 kw<br/>oil heater 2,0 kw<br/>main electric power 400 v / 50 hz<br/>connected load 49 kw (without conveyor)<br/>total input current 96 a<br/>power supply fuses 3 x 125 a<br/>power supply wire size 4 x 50 mm²<br/>isolations class ip 55<br/>tying system 4- fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 7 up to 8 tons/hour<br/>bulk weight of 50 kg/cbm approx. 10 up to 12 tons/hour<br/>bulk weight of 80 kg/cbm approx. 14 up to 16 tons/hour<br/>throughput rate with ruffler approx. 15 tons/hour<br/>bale weight 450 up to 750 kg, depends on material and bale length<br/>bale weight mixed cardboard approx. 580 kg<br/>bale weight mixed paper approx.  650<br/>bale weight pet- and hdpe bottles approx. 300 kg<br/>volume hydraulic oil tank 1,000 l<br/>hydraulic system working pressure 290 bar<br/>sps controller (manuf., type) siemens et 200 s<br/>operating panel (manuf., type) siemens ktp 700<br/>baler dimensions built up without hopper 9,755 x 2,227 x 3,229 mm (l x w x h)<br/>transport dimensions only baler 9,600 x 2,200 x 2,750 mm<br/>machine weight baler approx. 20 tons<br/><br/>special features of the machine:<br/>german plc, siemens, type et 200 s with touch panel, siemens, type kpt 700, internet modem for online service and system diagnosis can be retrofitted.<br/>german hydraulic pump from bucher hydraulics, internal gear qx, 5th generation, extremely robust and durable for over 30 years.<br/>german hydraulic valves from parker, available at short notice throughout europe. <br/>wear-resistant hardox 450 plates in the pressing chamber (base and side walls), as well as the press stemp is equipped with hardox 450 plates all around. <br/>service-friendly motor/pump unit, over 500 x 500 mm flange plate can be dismantled in one unit without disconnecting the motor from the pump. <br/>all knives, on the press stemp as well as the counter knives in the frame are segmented, can be interchanged and can be rotated by 180°, so they can be used twice.<br/><br/>service of the manufacturer and its partners in europe:<br/>all wearing parts and spare parts, also hydraulic pumps and cylinders are available in 12 up to max. 24 hours by courier service.<br/>service technicians are on site within 24 up to max. 48 hours within europe. MANUFACTURER ANIS TREND D.O.O.
TYPE ATS110-75D 60 TONS
YEAR OF CONSTRUCTION 2019
HOURS OF OPERATION 52 HOURS
PRESS POWER MAIN PRESS 59 TONS
SPECIFIC PRESS CAPACITY 71 N/CM²
BALE DENSITY WITH MATERIAL CARDBOARD APPROX.450 KG/M³
BALE DENSITY WITH MATERIAL PET- AND HDPE BOTTLES APPROX. 280 UP TO 320 KG/M³
FEED HOPPER 1,600 X 1,040 MM
CAPACITY PER CYCLE 2,13 M³
THEORETIC CYCLE TIME 10,7 SEC.
CYCLE TIME UNDER OPERATING CONDITIONS APPROX. 20 SEC.
THEORETIC THROUGHPUT RATE 441 M³/HOUR
THROUGHPUT RATE UNDER OPERATING CONDITIONS APPROX. 235 M³/HOUR
BALE SIZE 1,100 X 770 X 1,200 UP TO 2,200 MM (W X H X L)
DRIVING MOTOR 45 KW
OIL COOLER 1,5 KW
OIL HEATER 2,0 KW
MAIN ELECTRIC POWER 400 V / 50 HZ
CONNECTED LOAD 49 KW (WITHOUT CONVEYOR)
TOTAL INPUT CURRENT 96 A
POWER SUPPLY FUSES 3 X 125 A
POWER SUPPLY WIRE SIZE 4 X 50 MM²
ISOLATIONS CLASS IP 55
TYING SYSTEM 4- FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 7 UP TO 8 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 10 UP TO 12 TONS/HOUR
BULK WEIGHT OF 80 KG/CBM APPROX. 14 UP TO 16 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 15 TONS/HOUR
BALE WEIGHT 450 UP TO 750 KG, DEPENDS ON MATERIAL AND BALE LENGTH
BALE WEIGHT MIXED CARDBOARD APPROX. 580 KG
BALE WEIGHT MIXED PAPER APPROX. 650
BALE WEIGHT PET- AND HDPE BOTTLES APPROX. 300 KG
VOLUME HYDRAULIC OIL TANK 1,000 L
HYDRAULIC SYSTEM WORKING PRESSURE 290 BAR
SPS CONTROLLER (MANUF., TYPE) SIEMENS ET 200 S
OPERATING PANEL (MANUF., TYPE) SIEMENS KTP 700
BALER DIMENSIONS BUILT UP WITHOUT HOPPER 9,755 X 2,227 X 3,229 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 9,600 X 2,200 X 2,750 MM
MACHINE WEIGHT BALER APPROX. 20 TONS

SPECIAL FEATURES OF THE MACHINE:
GERMAN PLC, SIEMENS, TYPE ET 200 S WITH TOUCH PANEL, SIEMENS, TYPE KPT 700, INTERNET MODEM FOR ONLINE SERVICE AND SYSTEM DIAGNOSIS CAN BE RETROFITTED.
GERMAN HYDRAULIC PUMP FROM BUCHER HYDRAULICS, INTERNAL GEAR QX, 5TH GENERATION, EXTREMELY ROBUST AND DURABLE FOR OVER 30 YEARS.
GERMAN HYDRAULIC VALVES FROM PARKER, AVAILABLE AT SHORT NOTICE THROUGHOUT EUROPE.
WEAR-RESISTANT HARDOX 450 PLATES IN THE PRESSING CHAMBER (BASE AND SIDE WALLS), AS WELL AS THE PRESS STEMP IS EQUIPPED WITH HARDOX 450 PLATES ALL AROUND.
SERVICE-FRIENDLY MOTOR/PUMP UNIT, OVER 500 X 500 MM FLANGE PLATE CAN BE DISMANTLED IN ONE UNIT WITHOUT DISCONNECTING THE MOTOR FROM THE PUMP.
ALL KNIVES, ON THE PRESS STEMP AS WELL AS THE COUNTER KNIVES IN THE FRAME ARE SEGMENTED, CAN BE INTERCHANGED AND CAN BE ROTATED BY 180°, SO THEY CAN BE USED TWICE.

SERVICE OF THE MANUFACTURER AND ITS PARTNERS IN EUROPE:
ALL WEARING PARTS AND SPARE PARTS, ALSO HYDRAULIC PUMPS AND CYLINDERS ARE AVAILABLE IN 12 UP TO MAX. 24 HOURS BY COURIER SERVICE.
SERVICE TECHNICIANS ARE ON SITE WITHIN 24 UP TO MAX. 48 HOURS WITHIN EUROPE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-printing machine carint carraro 4+0 colours 
year 1995. 
printing width: max. 700mm---web width-max 750mm
reel diameter: unwind 1000mm----rewind 1000mm
core size: 70-76mm 
printing range: 320 mm  max 900mm
electric supply: 220volts-50 hz – 3 phase
materials to be printed: paper from 40 to 100 gsm
printing speed: up to 150 m/min
you can print on paper such as: lwc-mwc-sc-craft paper and many more. 
in very good condition. suited for finer gift-wrapping paper and flower-wrapping paper.
PRINTING MACHINE CARINT CARRARO 4+0 COLOURS YEAR 1995. PRINTING WIDTH: MAX. 700MM---WEB WIDTH-MAX 750MM REEL DIAMETER: UNWIND 1000MM----REWIND 1000MM CORE SIZE: 70-76MM PRINTING RANGE: 320 MM MAX 900MM ELECTRIC SUPPLY: 220VOLTS-50 HZ – 3 PHASE MATERIALS TO BE PRINTED: PAPER FROM 40 TO 100 GSM PRINTING SPEED: UP TO 150 M/MIN YOU CAN PRINT ON PAPER SUCH AS: LWC-MWC-SC-CRAFT PAPER AND MANY MORE. IN VERY GOOD CONDITION. SUITED FOR FINER GIFT-WRAPPING PAPER AND FLOWER-WRAPPING PAPER.
Vendedor: Palm Brokers
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-(labeling around and at the ground)
(set to tapered rectangular cups)
output :			120 p. / min.
equipment			hand feeder
cup stacker
transport to the removal
removable

  (LABELING AROUND AND AT THE GROUND) (SET TO TAPERED RECTANGULAR CUPS) OUTPUT : 120 P. / MIN. EQUIPMENT HAND FEEDER CUP STACKER TRANSPORT TO THE REMOVAL REMOVABLE
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: 86.900 €
Ubicación: Land-; mileage [km]: 105000; power [ps]: 428; gross weight [kg]: 32000; transmission: automatisch; front tyre size: 315/80 r 22,5; rear tyre size: 315/80 r 22,5; accessories: abs, differentialsperre; colour: rot; wheelbase: 4250; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 5800x2390x1000; max payload [kg]: 17822 ; MILEAGE [KM]: 105000; POWER [PS]: 428; GROSS WEIGHT [KG]: 32000; TRANSMISSION: AUTOMATISCH; FRONT TYRE SIZE: 315/80 R 22,5; REAR TYRE SIZE: 315/80 R 22,5; ACCESSORIES: ABS, DIFFERENTIALSPERRE; COLOUR: ROT; WHEELBASE: 4250; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 5800X2390X1000; MAX PAYLOAD [KG]: 17822
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-tray shrink packer smi sk 300 t, never installed

this tray - shrink wrapper was made by italian smi in 2006 and it has never been installed. it is an automatic machine for packing plastic, metal, cardboard and glass containers. the machine packs containers on a carton pad, folds the pad into a tray and wraps a film around the pack and it is set up for glass bottles in format 6 x 4. this machine has never been used, stored properly indoors and is ready for immediate delivery.

make: smi s.p.a., italy
model: sk 300 t
year: 2006
serial no: pc06162/s8357
capacity: 30 packs/min
current format: 6 x 4
electricity: 380 v, 50 hz
running hours: zero
condition: never used, good condition   TRAY SHRINK PACKER SMI SK 300 T, NEVER INSTALLED THIS TRAY - SHRINK WRAPPER WAS MADE BY ITALIAN SMI IN 2006 AND IT HAS NEVER BEEN INSTALLED. IT IS AN AUTOMATIC MACHINE FOR PACKING PLASTIC, METAL, CARDBOARD AND GLASS CONTAINERS. THE MACHINE PACKS CONTAINERS ON A CARTON PAD, FOLDS THE PAD INTO A TRAY AND WRAPS A FILM AROUND THE PACK AND IT IS SET UP FOR GLASS BOTTLES IN FORMAT 6 X 4. THIS MACHINE HAS NEVER BEEN USED, STORED PROPERLY INDOORS AND IS READY FOR IMMEDIATE DELIVERY. MAKE: SMI S.P.A., ITALY MODEL: SK 300 T YEAR: 2006 SERIAL NO: PC06162/S8357 CAPACITY: 30 PACKS/MIN CURRENT FORMAT: 6 X 4 ELECTRICITY: 380 V, 50 HZ RUNNING HOURS: ZERO CONDITION: NEVER USED, GOOD CONDITION
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 94.900 €
Ubicación: Land-; mileage [km]: 80380; power [ps]: 449; gross weight [kg]: 41000; transmission: automatisch; accessories: abs, bordcomputer, differentialsperre, klimaanlage, tempomat, ets - eletronische traktionskontrolle; colour: rot; wheelbase: 4550; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 5490x2350x1300; max payload [kg]: 25165 ; MILEAGE [KM]: 80380; POWER [PS]: 449; GROSS WEIGHT [KG]: 41000; TRANSMISSION: AUTOMATISCH; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: ROT; WHEELBASE: 4550; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 5490X2350X1300; MAX PAYLOAD [KG]: 25165
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-automatic vertical baling line autefa, year 1999

this baling line was made by autefa in year 1999. the line has been used to press bales from a fibrous by-product from a pulp process, and is suitable for different kinds of man-made and natural materials, including cotton, wool, straw, paper, plastic etc. the baling system consists of four parallel infeed and pre-pressing lines, two main presses with wrapping and strapping functions, a two-lane rail system to and from the presses and an automated warehouse system in two floors including a lift for product bales, stackers, labelers and conveyors. the system can bale two different materials simultaneously, as each fiber line is assigned to a different pre-press.

working description:

the material is pneumatically conveyed via an air tube to a vertical dosing system. the material is separated from the transporting airflow and collected into a chamber, which cyclically releases the accumulated material into another collection chamber below it. once the desired amount is collected to the second chamber, it is gravitationally released to a pre-pressing unit below. in the pre-pressing unit, the material is pressed into a bin, which is then transported via the rail system to the main press. the main press unit presses the bale into desired dimensions, removes the bin and wraps plastic straps and film around the bale. the bin is then transported back to pre-pressing unit and the bale to an automated warehouse via the two-lane rail system.

technical data:

manufacturer: autefa solutions
year: 1999
type: uni box 2000
capacity: 220 t/day
control plc: allen bradley
number of pre-presses: 4
number of main presses: 2
number of operators: 1   AUTOMATIC VERTICAL BALING LINE AUTEFA, YEAR 1999 THIS BALING LINE WAS MADE BY AUTEFA IN YEAR 1999. THE LINE HAS BEEN USED TO PRESS BALES FROM A FIBROUS BY-PRODUCT FROM A PULP PROCESS, AND IS SUITABLE FOR DIFFERENT KINDS OF MAN-MADE AND NATURAL MATERIALS, INCLUDING COTTON, WOOL, STRAW, PAPER, PLASTIC ETC. THE BALING SYSTEM CONSISTS OF FOUR PARALLEL INFEED AND PRE-PRESSING LINES, TWO MAIN PRESSES WITH WRAPPING AND STRAPPING FUNCTIONS, A TWO-LANE RAIL SYSTEM TO AND FROM THE PRESSES AND AN AUTOMATED WAREHOUSE SYSTEM IN TWO FLOORS INCLUDING A LIFT FOR PRODUCT BALES, STACKERS, LABELERS AND CONVEYORS. THE SYSTEM CAN BALE TWO DIFFERENT MATERIALS SIMULTANEOUSLY, AS EACH FIBER LINE IS ASSIGNED TO A DIFFERENT PRE-PRESS. WORKING DESCRIPTION: THE MATERIAL IS PNEUMATICALLY CONVEYED VIA AN AIR TUBE TO A VERTICAL DOSING SYSTEM. THE MATERIAL IS SEPARATED FROM THE TRANSPORTING AIRFLOW AND COLLECTED INTO A CHAMBER, WHICH CYCLICALLY RELEASES THE ACCUMULATED MATERIAL INTO ANOTHER COLLECTION CHAMBER BELOW IT. ONCE THE DESIRED AMOUNT IS COLLECTED TO THE SECOND CHAMBER, IT IS GRAVITATIONALLY RELEASED TO A PRE-PRESSING UNIT BELOW. IN THE PRE-PRESSING UNIT, THE MATERIAL IS PRESSED INTO A BIN, WHICH IS THEN TRANSPORTED VIA THE RAIL SYSTEM TO THE MAIN PRESS. THE MAIN PRESS UNIT PRESSES THE BALE INTO DESIRED DIMENSIONS, REMOVES THE BIN AND WRAPS PLASTIC STRAPS AND FILM AROUND THE BALE. THE BIN IS THEN TRANSPORTED BACK TO PRE-PRESSING UNIT AND THE BALE TO AN AUTOMATED WAREHOUSE VIA THE TWO-LANE RAIL SYSTEM. TECHNICAL DATA: MANUFACTURER: AUTEFA SOLUTIONS YEAR: 1999 TYPE: UNI BOX 2000 CAPACITY: 220 T/DAY CONTROL PLC: ALLEN BRADLEY NUMBER OF PRE-PRESSES: 4 NUMBER OF MAIN PRESSES: 2 NUMBER OF OPERATORS: 1
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-current capacity:  kva<br/>throat:  mm<br/>contact pressure capacity:  kp<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> CURRENT CAPACITY: KVA
THROAT: MM
CONTACT PRESSURE CAPACITY: KP
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-diesel generator power plant 119 mw with wartsila 7x18v46 hfo

this 119 mw power plant (iso condition) was delivered by wartsila in year 2002, operation started in 2003 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated around 60 000 hours in base load power production. this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works were carried out strictly in accordance with wartsila manuals. the plant was professionally dismantled in 2017 and before dismantling 60 000 hour major overhauled was carried out to all engines. during the operation no any unexpected breakdowns has happened. delivery contains complete functioning power plant equipment with 110 kv switchyard equipment. buildings and tanks can be discussed but are not a part of our standard offering.

main plant characteristics at current site conditions:

power output iso from alternators: 119 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c   DIESEL GENERATOR POWER PLANT 119 MW WITH WARTSILA 7X18V46 HFO THIS 119 MW POWER PLANT (ISO CONDITION) WAS DELIVERED BY WARTSILA IN YEAR 2002, OPERATION STARTED IN 2003 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED AROUND 60 000 HOURS IN BASE LOAD POWER PRODUCTION. THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS WERE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS. THE PLANT WAS PROFESSIONALLY DISMANTLED IN 2017 AND BEFORE DISMANTLING 60 000 HOUR MAJOR OVERHAULED WAS CARRIED OUT TO ALL ENGINES. DURING THE OPERATION NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT EQUIPMENT WITH 110 KV SWITCHYARD EQUIPMENT. BUILDINGS AND TANKS CAN BE DISCUSSED BUT ARE NOT A PART OF OUR STANDARD OFFERING. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: POWER OUTPUT ISO FROM ALTERNATORS: 119 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-current capacity:  kva<br/>throat:  mm<br/>contact pressure capacity:  kp<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> CURRENT CAPACITY: KVA
THROAT: MM
CONTACT PRESSURE CAPACITY: KP
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-automatic all around packer krones variopac pfs 45
  
this krones variopac pfs 45 is currently in use, is perfectly maintained and has less than 6500 running hours. it is currently being used for stretch film multipacks only. it comes complete with the infeed table and heating tunnel. the equipment is currently being used for 250ml, 300ml, 350ml and 500 ml. its maximum speed is 45 tact/minute. the equipment is available at the end of q2 of 2016.
 
make: krones / kettner
type: variopac pfs 45
serial: 22/0380/025
manufacturing year 2002
capacity: up to 45 tact / hour
running hours: less than 6.500 hrs
container handling: pet bottles 250, 300, 350 and 500 ml
current package: shrink film only
electricity: 460 v / 60 hz   AUTOMATIC ALL AROUND PACKER KRONES VARIOPAC PFS 45 THIS KRONES VARIOPAC PFS 45 IS CURRENTLY IN USE, IS PERFECTLY MAINTAINED AND HAS LESS THAN 6500 RUNNING HOURS. IT IS CURRENTLY BEING USED FOR STRETCH FILM MULTIPACKS ONLY. IT COMES COMPLETE WITH THE INFEED TABLE AND HEATING TUNNEL. THE EQUIPMENT IS CURRENTLY BEING USED FOR 250ML, 300ML, 350ML AND 500 ML. ITS MAXIMUM SPEED IS 45 TACT/MINUTE. THE EQUIPMENT IS AVAILABLE AT THE END OF Q2 OF 2016. MAKE: KRONES / KETTNER TYPE: VARIOPAC PFS 45 SERIAL: 22/0380/025 MANUFACTURING YEAR 2002 CAPACITY: UP TO 45 TACT / HOUR RUNNING HOURS: LESS THAN 6.500 HRS CONTAINER HANDLING: PET BOTTLES 250, 300, 350 AND 500 ML CURRENT PACKAGE: SHRINK FILM ONLY ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 1100 x 550 x 400 mm<br/>description: serial number n 08-02-07-22755, rev: 25.2, accuracy +/- 0.051 mm, including transport case, notebook, accessories WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 550 X 400 MM
DESCRIPTION: SERIAL NUMBER N 08-02-07-22755, REV: 25.2, ACCURACY +/- 0.051 MM, INCLUDING TRANSPORT CASE, NOTEBOOK, ACCESSORIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeling machine krones contiroll hs 966-24, year 2012
 
this krones contiroll roll feed sleever has been used for three years before it was professionally dismantled, packaged for transportation and placed in a warehouse. it makes wrap-around plastic labels glued with two narrow strips of hotmelt glue on both ends of the label. labels are fed on two rolls and change from one to another roll is automatic. the machine is in very good condition, safely stored and ready for shipment. it has been used for wrap around label up to 45 000 bph using 20 oz hot fill vitamin water.
 
the equipment has following features:
 
- parallel configuration u (infeed and outfeed on same side)
- bottle orientation by vision system
- motorized bottle tabels, using servo motors
- cutting system plates using servo motor
- label lengths of between 172 mm and 640 mm can be handled with one labeling station
- motorized double reels with automatic splicing of the label webs during reel change-over
- all label transfers are done by vacuum grip system
- replaceable hot melt gluing unit
 
manufacturer: krones
type: contiroll hs 960-24 roll feed
manufactured in: 2012
type/serial: 810+764
capacity max: 750 bpm (45.000 bph)
container material: pet
running hours: approx 22.000
power / voltage: 460/266 v - 60 hz   LABELING MACHINE KRONES CONTIROLL HS 966-24, YEAR 2012 THIS KRONES CONTIROLL ROLL FEED SLEEVER HAS BEEN USED FOR THREE YEARS BEFORE IT WAS PROFESSIONALLY DISMANTLED, PACKAGED FOR TRANSPORTATION AND PLACED IN A WAREHOUSE. IT MAKES WRAP-AROUND PLASTIC LABELS GLUED WITH TWO NARROW STRIPS OF HOTMELT GLUE ON BOTH ENDS OF THE LABEL. LABELS ARE FED ON TWO ROLLS AND CHANGE FROM ONE TO ANOTHER ROLL IS AUTOMATIC. THE MACHINE IS IN VERY GOOD CONDITION, SAFELY STORED AND READY FOR SHIPMENT. IT HAS BEEN USED FOR WRAP AROUND LABEL UP TO 45 000 BPH USING 20 OZ HOT FILL VITAMIN WATER. THE EQUIPMENT HAS FOLLOWING FEATURES: - PARALLEL CONFIGURATION U (INFEED AND OUTFEED ON SAME SIDE) - BOTTLE ORIENTATION BY VISION SYSTEM - MOTORIZED BOTTLE TABELS, USING SERVO MOTORS - CUTTING SYSTEM PLATES USING SERVO MOTOR - LABEL LENGTHS OF BETWEEN 172 MM AND 640 MM CAN BE HANDLED WITH ONE LABELING STATION - MOTORIZED DOUBLE REELS WITH AUTOMATIC SPLICING OF THE LABEL WEBS DURING REEL CHANGE-OVER - ALL LABEL TRANSFERS ARE DONE BY VACUUM GRIP SYSTEM - REPLACEABLE HOT MELT GLUING UNIT MANUFACTURER: KRONES TYPE: CONTIROLL HS 960-24 ROLL FEED MANUFACTURED IN: 2012 TYPE/SERIAL: 810+764 CAPACITY MAX: 750 BPM (45.000 BPH) CONTAINER MATERIAL: PET RUNNING HOURS: APPROX 22.000 POWER / VOLTAGE: 460/266 V - 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 290 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 1400 x 800 x 1050 mm<br/>description: power around 11 hp. working hours 22450 WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 800 X 1050 MM
DESCRIPTION: POWER AROUND 11 HP. WORKING HOURS 22450
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 3.800 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 2550 x 1600 x 2000 mm<br/>description: power 90 kw. 125 hp. 7 bar. working hours around 19000. WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 2550 X 1600 X 2000 MM
DESCRIPTION: POWER 90 KW. 125 HP. 7 BAR. WORKING HOURS AROUND 19000.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-rinser for glass and pet bottles, fully automatic wab adv 12 000 bph
 
the rinser was made by italian wab in year 2003 and it has capacity of 12 000 bph this machine has a special grip which allows to work with both pet and glass bottles. it is designed to rinse bottles inside with water or specific detergents with adjustable concentration. as an option, machine is equipped with rinsing water filtration system which protects and avoids dirty water penetration in to rinsing system. for easy operation and format change, machine is equipped with electronic carousel height adjustment. the rinser in dismantled and in good condition.
 
technical description
 
suitable for: glass and pet bottles
manufacturer: wab (italy)
manufacturing year: 2003
model: adv 1r+1s 7-35-125-107
number of rinsing heads: 35
maximum pitch: 125 mm
capacity: 12 000 bph
used for bottle sizes: 350 - 1000 ml
bottle diameters used: 58.2 - 79.5 mm
botlle heights used: 214 - 355 mm
rinsing temperature min: 10 c - max 40 c degrees
serial nr: c646/35 adv
electricity: 220v / 50 hz
installed power: 9,5 kva   RINSER FOR GLASS AND PET BOTTLES, FULLY AUTOMATIC WAB ADV 12 000 BPH THE RINSER WAS MADE BY ITALIAN WAB IN YEAR 2003 AND IT HAS CAPACITY OF 12 000 BPH THIS MACHINE HAS A SPECIAL GRIP WHICH ALLOWS TO WORK WITH BOTH PET AND GLASS BOTTLES. IT IS DESIGNED TO RINSE BOTTLES INSIDE WITH WATER OR SPECIFIC DETERGENTS WITH ADJUSTABLE CONCENTRATION. AS AN OPTION, MACHINE IS EQUIPPED WITH RINSING WATER FILTRATION SYSTEM WHICH PROTECTS AND AVOIDS DIRTY WATER PENETRATION IN TO RINSING SYSTEM. FOR EASY OPERATION AND FORMAT CHANGE, MACHINE IS EQUIPPED WITH ELECTRONIC CAROUSEL HEIGHT ADJUSTMENT. THE RINSER IN DISMANTLED AND IN GOOD CONDITION. TECHNICAL DESCRIPTION SUITABLE FOR: GLASS AND PET BOTTLES MANUFACTURER: WAB (ITALY) MANUFACTURING YEAR: 2003 MODEL: ADV 1R+1S 7-35-125-107 NUMBER OF RINSING HEADS: 35 MAXIMUM PITCH: 125 MM CAPACITY: 12 000 BPH USED FOR BOTTLE SIZES: 350 - 1000 ML BOTTLE DIAMETERS USED: 58.2 - 79.5 MM BOTLLE HEIGHTS USED: 214 - 355 MM RINSING TEMPERATURE MIN: 10 C - MAX 40 C DEGREES SERIAL NR: C646/35 ADV ELECTRICITY: 220V / 50 HZ INSTALLED POWER: 9,5 KVA
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 54.500 €
Ubicación: Land-einseitige kantenanleimmaschine\r\nfabrikat: biesse\r\ntyp: stream b1/8.5\r\nbaujahr: 2007\r\n\r\nmit werkstückrückführung\r\n\r\nstandard ausrüstung grundmaschine\r\n- riemenoberdruck mit doppel- v -profil\r\n- elektronische höheneinstellung des oberdrucks\r\n- inverter für die vorschubkettengeschwindigkeit\r\n- eigener inverter für jedes aggregat\r\n- pc benutzeroberfläche windows xp\r\n- statistik-software mit exportmöglichkeit in excel\r\n- unbegrenzte log-dateien \r\n- absaugvorrichtung eingebaut im maschinenbett\r\n\r\nwerkstückauflage\r\nin der breite verstellbare hilfsauflage bestehend aus einem aluminiumprofil mit nicht angetriebenen rollen.\r\n\r\nnc-steuerung\r\n\r\neigenschaften\r\n- betriebssystem windows xp professionell\r\n- sintra maschinensteuerung mit windows xp oberfläche\r\n- positionierung der achsen (maschine rüsten)\r\n- elektronische verstellung der vorschubgeschwindigkeit\r\n- elektronische verstellung des oberdrucks\r\n\r\nfügefräsaggregat\r\nfräsaggregat bestehend aus 2 gegenläufigen fräser mit vertikaler achse.\r\n- drehzahl werkzeug min. 9.000 u/min\r\n- motorleistung min. 3,5 + 3,5 kw\r\n- welle (d. x länge) min. 30 x 50 mm\r\nnc-gesteuerter tastschuh am ersten motor um die stärke des abtrages automatisch verstellen zu können\r\n\r\ninfrarotheizlampe\r\n2 infrarotheizlampen, eine oben eine unten zur vorwärmung der werkstückkante die angeleimt wird.\r\n\r\nleimauftragsstation\r\nanleimstation für gerade kanten aus melaminharz, abs, pvc, pp, furnier\r\nmit thermoplastischen eva- klebstoffen\r\n- patentiertes high- melt system, leimwalze und leimschale getrennt\r\n- schnellwechselsystem der leimschale durch einfaches heraus-schwenken aus dem aggregat\r\n- leimwalze und schale komplett teflonbeschichtet\r\n- leimmengendosierung einfach einstellbar\r\n- elektronische synchronlauf der leimwalze mit plattenvorschub\r\n- granulatbehälter mit schleuse direkt an der aufschmelzeinheit\r\n- kantenüberwachung mittels fotozelle\r\n- automatische kantenwechsel nc-gesteuert\r\ndruckzone:\r\n- 1 angetriebene rolle d= 150 mm\r\n- 3 freilaufende rollen d= 65 mm\r\n\r\ntechnische daten:\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n- kantenquerschnitt kappschere min. 135\r\n- werkstückstärke min. 10 mm max. 60 mm\r\n- kantenhöhe min. 15 mm max. 65 mm\r\n- minimale kantenlänge min. 150 mm\r\n\r\nnc y-achse für druckzone\r\ndie verstellung der druckzone erfolgt motorisiert und wird über die steuerung eingestellt.\r\n\r\nz-achse für kantenzuführung\r\nautomatische höhenverstellung der kantenzuführung, in position zur angetriebenen andruckrolle.\r\n\r\nzwölffach kantenmagazin\r\nkantenmagazin für 12 rollenkanten\r\ndie kantenrollen werden vertikal in das magazin hineingestellt und über eine fotozelle wird das ende der rolle überwacht.\r\ndie auswahl der kante erfolgt von der steuerung und bei hinterlegung des gleichen kantentype wird automatisch beim ende der rolle auf die andere gewechselt.\r\n\r\nkappaggregat it90-s\r\nkappagggregat, komplett mit 2 motoren für anleimstärken bis 3 mm.\r\nneigung der motoren an der vertikalachse von 0° auf 25° mit automatischer schwenkung.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 rqm\r\n- motorleistung min. 0,3 + 0,3 kw\r\n- vorschubgeschwindigkeit min. 28 mt/min\r\n- kantendicke min. 0,3 mm max. 3 mm\r\n- werkstückdicke min. 10 mm max. 60 mm\r\n\r\ntastschuh mit 3 positionen für kappaggregat it90\r\n3 unabhängig voneinander einstellbare anschläge pro sägewagen zum verstellen des y-tastschuhes.\r\ndie auswahl des anschlages erfolgt elektropneumatisch und wird vom pc aus gesteuert.\r\n\r\nvorfräsaggregat rs10\r\ndas aggregat ist mit zwei übereinander angeordneten motoren ausgestattet.\r\nbeide motoren sind mit vertikalen tastrollen ausgestattet.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorlesitung 1,3 + 1,3 kw\r\n\r\nfeinfräsaggregat rf40 - fase 25°\r\njeder motor ist komplett mit horizontalem und vertikalem taster und auf schlitten schwenkbar.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,65 + 0,65 kw\r\n\r\nmultifunktionsfräsaggregat ar30\r\nfür feinfräsen und eckenkopieren an werkstücken mit (abs/pvc/pp) kanten bis 3 mm stärke.\r\neckenkopieren ist an geraden sowie an profilierten kanten als auch an soft- und postformingplatten 90° und 180° werkstücke.\r\nfeinfräsen in hoher qualität\r\n\r\nautomatisches umrüsten von dünn- auf dickkante\r\nes ist möglich das aggregat vom bedienpult aus automatisch von dünnkante (0,4 mm) auf dickkante (3,0 mm) umzustellen.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,35 + 0,35 kw\r\n- vorschubgeschwindigkeit max. 18 m/min.\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n\r\n4 pneumatische festpunkte für seitentaster ar30\r\nnc gesteuerte festpunkte zum verstellen des seitentasters zum bearbeiten von 3 dünnkanten und 2 dickkanten\r\n\r\nautomatisches werkzeugwechselmagazin \r\nautomatischen werkzeugwechsel mit einem 5-fach magazin\r\n\r\nprofilziehklingenaggregat rb40\r\nzur nachbearbeitung für abs/pvc/pp kanten.\r\nenthält eine obere und eine untere einheit mit vertikalen und horizontalen kopierscheiben.\r\nautomatis EINSEITIGE KANTENANLEIMMASCHINE\R\NFABRIKAT: BIESSE\R\NTYP: STREAM B1/8.5\R\NBAUJAHR: 2007\R\N\R\NMIT WERKSTüCKRüCKFüHRUNG\R\N\R\NSTANDARD AUSRüSTUNG GRUNDMASCHINE\R\N- RIEMENOBERDRUCK MIT DOPPEL- V -PROFIL\R\N- ELEKTRONISCHE HöHENEINSTELLUNG DES OBERDRUCKS\R\N- INVERTER FüR DIE VORSCHUBKETTENGESCHWINDIGKEIT\R\N- EIGENER INVERTER FüR JEDES AGGREGAT\R\N- PC BENUTZEROBERFLäCHE WINDOWS XP\R\N- STATISTIK-SOFTWARE MIT EXPORTMöGLICHKEIT IN EXCEL\R\N- UNBEGRENZTE LOG-DATEIEN \R\N- ABSAUGVORRICHTUNG EINGEBAUT IM MASCHINENBETT\R\N\R\NWERKSTüCKAUFLAGE\R\NIN DER BREITE VERSTELLBARE HILFSAUFLAGE BESTEHEND AUS EINEM ALUMINIUMPROFIL MIT NICHT ANGETRIEBENEN ROLLEN.\R\N\R\NNC-STEUERUNG\R\N\R\NEIGENSCHAFTEN\R\N- BETRIEBSSYSTEM WINDOWS XP PROFESSIONELL\R\N- SINTRA MASCHINENSTEUERUNG MIT WINDOWS XP OBERFLäCHE\R\N- POSITIONIERUNG DER ACHSEN (MASCHINE RüSTEN)\R\N- ELEKTRONISCHE VERSTELLUNG DER VORSCHUBGESCHWINDIGKEIT\R\N- ELEKTRONISCHE VERSTELLUNG DES OBERDRUCKS\R\N\R\NFüGEFRäSAGGREGAT\R\NFRäSAGGREGAT BESTEHEND AUS 2 GEGENLäUFIGEN FRäSER MIT VERTIKALER ACHSE.\R\N- DREHZAHL WERKZEUG MIN. 9.000 U/MIN\R\N- MOTORLEISTUNG MIN. 3,5 + 3,5 KW\R\N- WELLE (D. X LäNGE) MIN. 30 X 50 MM\R\NNC-GESTEUERTER TASTSCHUH AM ERSTEN MOTOR UM DIE STäRKE DES ABTRAGES AUTOMATISCH VERSTELLEN ZU KöNNEN\R\N\R\NINFRAROTHEIZLAMPE\R\N2 INFRAROTHEIZLAMPEN, EINE OBEN EINE UNTEN ZUR VORWäRMUNG DER WERKSTüCKKANTE DIE ANGELEIMT WIRD.\R\N\R\NLEIMAUFTRAGSSTATION\R\NANLEIMSTATION FüR GERADE KANTEN AUS MELAMINHARZ, ABS, PVC, PP, FURNIER\R\NMIT THERMOPLASTISCHEN EVA- KLEBSTOFFEN\R\N- PATENTIERTES HIGH- MELT SYSTEM, LEIMWALZE UND LEIMSCHALE GETRENNT\R\N- SCHNELLWECHSELSYSTEM DER LEIMSCHALE DURCH EINFACHES HERAUS-SCHWENKEN AUS DEM AGGREGAT\R\N- LEIMWALZE UND SCHALE KOMPLETT TEFLONBESCHICHTET\R\N- LEIMMENGENDOSIERUNG EINFACH EINSTELLBAR\R\N- ELEKTRONISCHE SYNCHRONLAUF DER LEIMWALZE MIT PLATTENVORSCHUB\R\N- GRANULATBEHäLTER MIT SCHLEUSE DIREKT AN DER AUFSCHMELZEINHEIT\R\N- KANTENüBERWACHUNG MITTELS FOTOZELLE\R\N- AUTOMATISCHE KANTENWECHSEL NC-GESTEUERT\R\NDRUCKZONE:\R\N- 1 ANGETRIEBENE ROLLE D= 150 MM\R\N- 3 FREILAUFENDE ROLLEN D= 65 MM\R\N\R\NTECHNISCHE DATEN:\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N- KANTENQUERSCHNITT KAPPSCHERE MIN. 135\R\N- WERKSTüCKSTäRKE MIN. 10 MM MAX. 60 MM\R\N- KANTENHöHE MIN. 15 MM MAX. 65 MM\R\N- MINIMALE KANTENLäNGE MIN. 150 MM\R\N\R\NNC Y-ACHSE FüR DRUCKZONE\R\NDIE VERSTELLUNG DER DRUCKZONE ERFOLGT MOTORISIERT UND WIRD üBER DIE STEUERUNG EINGESTELLT.\R\N\R\NZ-ACHSE FüR KANTENZUFüHRUNG\R\NAUTOMATISCHE HöHENVERSTELLUNG DER KANTENZUFüHRUNG, IN POSITION ZUR ANGETRIEBENEN ANDRUCKROLLE.\R\N\R\NZWöLFFACH KANTENMAGAZIN\R\NKANTENMAGAZIN FüR 12 ROLLENKANTEN\R\NDIE KANTENROLLEN WERDEN VERTIKAL IN DAS MAGAZIN HINEINGESTELLT UND üBER EINE FOTOZELLE WIRD DAS ENDE DER ROLLE üBERWACHT.\R\NDIE AUSWAHL DER KANTE ERFOLGT VON DER STEUERUNG UND BEI HINTERLEGUNG DES GLEICHEN KANTENTYPE WIRD AUTOMATISCH BEIM ENDE DER ROLLE AUF DIE ANDERE GEWECHSELT.\R\N\R\NKAPPAGGREGAT IT90-S\R\NKAPPAGGGREGAT, KOMPLETT MIT 2 MOTOREN FüR ANLEIMSTäRKEN BIS 3 MM.\R\NNEIGUNG DER MOTOREN AN DER VERTIKALACHSE VON 0° AUF 25° MIT AUTOMATISCHER SCHWENKUNG.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 RQM\R\N- MOTORLEISTUNG MIN. 0,3 + 0,3 KW\R\N- VORSCHUBGESCHWINDIGKEIT MIN. 28 MT/MIN\R\N- KANTENDICKE MIN. 0,3 MM MAX. 3 MM\R\N- WERKSTüCKDICKE MIN. 10 MM MAX. 60 MM\R\N\R\NTASTSCHUH MIT 3 POSITIONEN FüR KAPPAGGREGAT IT90\R\N3 UNABHäNGIG VONEINANDER EINSTELLBARE ANSCHLäGE PRO SäGEWAGEN ZUM VERSTELLEN DES Y-TASTSCHUHES.\R\NDIE AUSWAHL DES ANSCHLAGES ERFOLGT ELEKTROPNEUMATISCH UND WIRD VOM PC AUS GESTEUERT.\R\N\R\NVORFRäSAGGREGAT RS10\R\NDAS AGGREGAT IST MIT ZWEI üBEREINANDER ANGEORDNETEN MOTOREN AUSGESTATTET.\R\NBEIDE MOTOREN SIND MIT VERTIKALEN TASTROLLEN AUSGESTATTET.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLESITUNG 1,3 + 1,3 KW\R\N\R\NFEINFRäSAGGREGAT RF40 - FASE 25°\R\NJEDER MOTOR IST KOMPLETT MIT HORIZONTALEM UND VERTIKALEM TASTER UND AUF SCHLITTEN SCHWENKBAR.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,65 + 0,65 KW\R\N\R\NMULTIFUNKTIONSFRäSAGGREGAT AR30\R\NFüR FEINFRäSEN UND ECKENKOPIEREN AN WERKSTüCKEN MIT (ABS/PVC/PP) KANTEN BIS 3 MM STäRKE.\R\NECKENKOPIEREN IST AN GERADEN SOWIE AN PROFILIERTEN KANTEN ALS AUCH AN SOFT- UND POSTFORMINGPLATTEN 90° UND 180° WERKSTüCKE.\R\NFEINFRäSEN IN HOHER QUALITäT\R\N\R\NAUTOMATISCHES UMRüSTEN VON DüNN- AUF DICKKANTE\R\NES IST MöGLICH DAS AGGREGAT VOM BEDIENPULT AUS AUTOMATISCH VON DüNNKANTE (0,4 MM) AUF DICKKANTE (3,0 MM) UMZUSTELLEN.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,35 + 0,35 KW\R\N- VORSCHUBGESCHWINDIGKEIT MAX. 18 M/MIN.\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N\R\N4 PNEUMATISCHE FESTPUNKTE FüR SEITENTASTER AR30\R\NNC GESTEUERTE FESTPUNKTE ZUM VERSTELLEN DES SEITENTASTERS ZUM BEARBEITEN VON 3 DüNNKANTEN UND 2 DICKKANTEN\R\N\R\NAUTOMATISCHES WERKZEUGWECHSELMAGAZIN \R\NAUTOMATISCHEN WERKZEUGWECHSEL MIT EINEM 5-FACH MAGAZIN\R\N\R\NPROFILZIEHKLINGENAGGREGAT RB40\R\NZUR NACHBEARBEITUNG FüR ABS/PVC/PP KANTEN.\R\NENTHäLT EINE OBERE UND EINE UNTERE EINHEIT MIT VERTIKALEN UND HORIZONTALEN KOPIERSCHEIBEN.\R\NAUTOMATIS
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:

-bandsaw half machine with microprocessor control and manual function
-band saw blade size 4500 x 34.0 x 1.1 mm
-infinitely variable n 15 to 100 m/min cutting speed
-hydr. material clamping stock
-maximum clamping possibility 455 mm - mitre adjustable left to 60 â° right up to 45 â° - cutting capacity at 90 â° round 330 mm
	-square 320 mm
	-flat 450 x 320 mm
	-cutting capacity at 45 â° li + re around 320 mm
	-45 â° li + re flat 300 x 300 mm
	-60 â° li + re flat 200 x 200 mm
-drive 400 v / 4 kw
-coolant system - spã¤nerã¤umbã¼rste - original removal roller 3000 mm
-weight approx.					  	1200 kg - space requirement approx.	                 b h 1800 x 1950 x h 2000 mm
 TECHNICAL DATA: -BANDSAW HALF MACHINE WITH MICROPROCESSOR CONTROL AND MANUAL FUNCTION -BAND SAW BLADE SIZE 4500 X 34.0 X 1.1 MM -INFINITELY VARIABLE N 15 TO 100 M/MIN CUTTING SPEED -HYDR. MATERIAL CLAMPING STOCK -MAXIMUM CLAMPING POSSIBILITY 455 MM - MITRE ADJUSTABLE LEFT TO 60 &ACIRC;&DEG; RIGHT UP TO 45 &ACIRC;&DEG; - CUTTING CAPACITY AT 90 &ACIRC;&DEG; ROUND 330 MM -SQUARE 320 MM -FLAT 450 X 320 MM -CUTTING CAPACITY AT 45 &ACIRC;&DEG; LI + RE AROUND 320 MM -45 &ACIRC;&DEG; LI + RE FLAT 300 X 300 MM -60 &ACIRC;&DEG; LI + RE FLAT 200 X 200 MM -DRIVE 400 V / 4 KW -COOLANT SYSTEM - SP&ATILDE;&CURREN;NER&ATILDE;&CURREN;UMB&ATILDE;&FRAC14;RSTE - ORIGINAL REMOVAL ROLLER 3000 MM -WEIGHT APPROX. 1200 KG - SPACE REQUIREMENT APPROX. B H 1800 X 1950 X H 2000 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1200 x 2000 x 1800 mm<br/>description: - serial number lwc 01-012<br> - setup dimensions approx. 1850 x 1150 x 1620 mm<br> - laser strength 80 w<br> - including cooling system with h20<br> - laser pointer diode 635 nm<br> - with tool drawer cabinet with 7 drawers<br> - control karo<br> - version 1.72.49.a<br> - with windows pc<br> - device is sold as defective (mirror adjustment on the head exchanged or readjusted)<br> - including turning device with 6 pallet places<br> WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 2000 X 1800 MM
DESCRIPTION: - SERIAL NUMBER LWC 01-012
- SETUP DIMENSIONS APPROX. 1850 X 1150 X 1620 MM
- LASER STRENGTH 80 W
- INCLUDING COOLING SYSTEM WITH H20
- LASER POINTER DIODE 635 NM
- WITH TOOL DRAWER CABINET WITH 7 DRAWERS
- CONTROL KARO
- VERSION 1.72.49.A
- WITH WINDOWS PC
- DEVICE IS SOLD AS DEFECTIVE (MIRROR ADJUSTMENT ON THE HEAD EXCHANGED OR READJUSTED)
- INCLUDING TURNING DEVICE WITH 6 PALLET PLACES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line for beer and csd krones 22 000 bph with mixer

this complete pet bottle filling line was delivered by krones in year 2002 and it was in operation till 2015. the equipment is designed for beer and carbonated soft drinks and it has been filling the product in to 0.5, 1.5 and 2.0 liter pet bottles. line has a soft drink mixer. all equipment has siemens simatic s7 serie plc controls. line is complete with pet compressor and beverage mixer and it is still installed and powered and in good condition.

main characteristics of this line:
manufacturer: krones ag
capacity: 22 000 bph in 1.5 liter pet
20 000 bph in 2.0 liter pet
28 000 bph in 0.5 liter pet
operation started in year: 2002
operation stopped in year: 2015
container sizes used: 0.5, 1.5 and 2.0 liters
neck standard: pco 1810 - 28 mm
labels: film, hot glue, wrap around + front-back-neck
delivery package format: 3 x 4 shrink wrapped   PET BOTTLE FILLING LINE FOR BEER AND CSD KRONES 22 000 BPH WITH MIXER THIS COMPLETE PET BOTTLE FILLING LINE WAS DELIVERED BY KRONES IN YEAR 2002 AND IT WAS IN OPERATION TILL 2015. THE EQUIPMENT IS DESIGNED FOR BEER AND CARBONATED SOFT DRINKS AND IT HAS BEEN FILLING THE PRODUCT IN TO 0.5, 1.5 AND 2.0 LITER PET BOTTLES. LINE HAS A SOFT DRINK MIXER. ALL EQUIPMENT HAS SIEMENS SIMATIC S7 SERIE PLC CONTROLS. LINE IS COMPLETE WITH PET COMPRESSOR AND BEVERAGE MIXER AND IT IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KRONES AG CAPACITY: 22 000 BPH IN 1.5 LITER PET 20 000 BPH IN 2.0 LITER PET 28 000 BPH IN 0.5 LITER PET OPERATION STARTED IN YEAR: 2002 OPERATION STOPPED IN YEAR: 2015 CONTAINER SIZES USED: 0.5, 1.5 AND 2.0 LITERS NECK STANDARD: PCO 1810 - 28 MM LABELS: FILM, HOT GLUE, WRAP AROUND + FRONT-BACK-NECK DELIVERY PACKAGE FORMAT: 3 X 4 SHRINK WRAPPED
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 9.350 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 2000 x 800 x 2000 mm<br/>description: kuka kr 210 r 2700 prime industrial robot - serial no.: 619795<br> - nominal-loading capacity: 210 kg<br> - max. reach: 2696 mm<br> - number of axes: 6<br> - working area capacity: 55 m³<br> - protection class: ip 65<br> - control system: krc 4<br> - serial no.: 207627, yom: 2012<br> - voltage: 3 x 400 v, 50/60 hz<br> <br> axis data:<br> <br> movement area:<br> - a1: ± 185°<br> - a2: -140°/-5°<br> - a3: -120°/155°<br> - a4: ± 350°<br> - a5: ± 122,5°<br> - a6: ± 350°<br> <br> speed with nominal loading capacity:<br> - a1: 105°/s<br> - a2: 107°/s<br> - a3: 114°/s<br> - a4: 136°/s<br> - a5: 129°/s<br> - a6: 206°/s<br> <br> - nominal total load: 260 kg<br> - nominal additional load of base rack: 0 kg<br> - max. additional load of caroussel: 300 kg<br> - max. additional load of swing arm: 130 kg<br> - nominal additional load of arm: 50 kg<br> - max. additional load of arm: 150 kg<br> <br> - inclusive periphery and documentation WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 800 X 2000 MM
DESCRIPTION: KUKA KR 210 R 2700 PRIME INDUSTRIAL ROBOT - SERIAL NO.: 619795
- NOMINAL-LOADING CAPACITY: 210 KG
- MAX. REACH: 2696 MM
- NUMBER OF AXES: 6
- WORKING AREA CAPACITY: 55 M³
- PROTECTION CLASS: IP 65
- CONTROL SYSTEM: KRC 4
- SERIAL NO.: 207627, YOM: 2012
- VOLTAGE: 3 X 400 V, 50/60 HZ

AXIS DATA:

MOVEMENT AREA:
- A1: ± 185°
- A2: -140°/-5°
- A3: -120°/155°
- A4: ± 350°
- A5: ± 122,5°
- A6: ± 350°

SPEED WITH NOMINAL LOADING CAPACITY:
- A1: 105°/S
- A2: 107°/S
- A3: 114°/S
- A4: 136°/S
- A5: 129°/S
- A6: 206°/S

- NOMINAL TOTAL LOAD: 260 KG
- NOMINAL ADDITIONAL LOAD OF BASE RACK: 0 KG
- MAX. ADDITIONAL LOAD OF CAROUSSEL: 300 KG
- MAX. ADDITIONAL LOAD OF SWING ARM: 130 KG
- NOMINAL ADDITIONAL LOAD OF ARM: 50 KG
- MAX. ADDITIONAL LOAD OF ARM: 150 KG

- INCLUSIVE PERIPHERY AND DOCUMENTATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english.   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 9.350 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 2000 x 800 x 2000 mm<br/>description: <b>kuka kr 240 r 2500 prime industrial robot</b><br> - serial no.: 619781<br> - nominal-loading capacity: 240 kg<br> - max. reach: 2496 mm<br> - number of axes: 6<br> - working area capacity: 41 m³<br> - protection class: ip 65<br> - control system: krc 4<br> - serial no.: 207329, yom: 2012<br> - voltage: 3 x 400 v, 50/60 hz<br> <br> axis data:<br> <br> movement area:<br> - a1: ± 185°<br> - a2: -140°/-5°<br> - a3: -120°/155°<br> - a4: ± 350°<br> - a5: ± 122,5°<br> - a6: ± 350°<br> <br> speed with nominal loading capacity:<br> - a1: 105°/s<br> - a2: 107°/s<br> - a3: 114°/s<br> - a4: 136°/s<br> - a5: 129°/s<br> - a6: 206°/s<br> <br> - nominal total load: 290 kg<br> - nominal additional load of base rack: 0 kg<br> - max. additional load of caroussel: 300 kg<br> - max. additional load of swing arm: 130 kg<br> - nominal additional load of arm: 50 kg<br> - max. additional load of arm: 150 kg<br> <br> - inclusive periphery and documentation WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 800 X 2000 MM
DESCRIPTION: KUKA KR 240 R 2500 PRIME INDUSTRIAL ROBOT
- SERIAL NO.: 619781
- NOMINAL-LOADING CAPACITY: 240 KG
- MAX. REACH: 2496 MM
- NUMBER OF AXES: 6
- WORKING AREA CAPACITY: 41 M³
- PROTECTION CLASS: IP 65
- CONTROL SYSTEM: KRC 4
- SERIAL NO.: 207329, YOM: 2012
- VOLTAGE: 3 X 400 V, 50/60 HZ

AXIS DATA:

MOVEMENT AREA:
- A1: ± 185°
- A2: -140°/-5°
- A3: -120°/155°
- A4: ± 350°
- A5: ± 122,5°
- A6: ± 350°

SPEED WITH NOMINAL LOADING CAPACITY:
- A1: 105°/S
- A2: 107°/S
- A3: 114°/S
- A4: 136°/S
- A5: 129°/S
- A6: 206°/S

- NOMINAL TOTAL LOAD: 290 KG
- NOMINAL ADDITIONAL LOAD OF BASE RACK: 0 KG
- MAX. ADDITIONAL LOAD OF CAROUSSEL: 300 KG
- MAX. ADDITIONAL LOAD OF SWING ARM: 130 KG
- NOMINAL ADDITIONAL LOAD OF ARM: 50 KG
- MAX. ADDITIONAL LOAD OF ARM: 150 KG

- INCLUSIVE PERIPHERY AND DOCUMENTATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labelling machine khs innoket kl 2090/120 – 60

labelling machine by khs innoket kl 2090/120 – 60, manufactured in year 2005 and was stopped in year 2015. this labelling machine can be equipped with four of the same or different type labelling stations. currently it has two labelling system for paper labels with cold glue and additionally there are three stations for self-adhesive labels. machine it has been used for glass bottles front/back/neck labels. capacity for paper labels is 66 000 bph and for self-adhesive labels is 40 000 bph. controlled by siemens s7 plc. equipment is in very good condition.

technical specifications:

manufacturer: khs
machine type: innoket kl 2090/120 – 60
manufacturer year: 2005
ready cut paper labels, hot clue: 66 000 bph
self adhesive plastic labels: 40 000 bph
pitch: 120 mm
number of bottle turrets: 60 pcs.
carousel diameter: 2360 mm.
label positions: front, back, neck
label lengths: 140 mm.   LABELLING MACHINE KHS INNOKET KL 2090/120 – 60 LABELLING MACHINE BY KHS INNOKET KL 2090/120 – 60, MANUFACTURED IN YEAR 2005 AND WAS STOPPED IN YEAR 2015. THIS LABELLING MACHINE CAN BE EQUIPPED WITH FOUR OF THE SAME OR DIFFERENT TYPE LABELLING STATIONS. CURRENTLY IT HAS TWO LABELLING SYSTEM FOR PAPER LABELS WITH COLD GLUE AND ADDITIONALLY THERE ARE THREE STATIONS FOR SELF-ADHESIVE LABELS. MACHINE IT HAS BEEN USED FOR GLASS BOTTLES FRONT/BACK/NECK LABELS. CAPACITY FOR PAPER LABELS IS 66 000 BPH AND FOR SELF-ADHESIVE LABELS IS 40 000 BPH. CONTROLLED BY SIEMENS S7 PLC. EQUIPMENT IS IN VERY GOOD CONDITION. TECHNICAL SPECIFICATIONS: MANUFACTURER: KHS MACHINE TYPE: INNOKET KL 2090/120 – 60 MANUFACTURER YEAR: 2005 READY CUT PAPER LABELS, HOT CLUE: 66 000 BPH SELF ADHESIVE PLASTIC LABELS: 40 000 BPH PITCH: 120 MM NUMBER OF BOTTLE TURRETS: 60 PCS. CAROUSEL DIAMETER: 2360 MM. LABEL POSITIONS: FRONT, BACK, NECK LABEL LENGTHS: 140 MM.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec cello wrapper rotowrap c65-xl<br><br>cellophane wrapping machine. caroussell technology for larger sized products and fast packaging. - technical specifications: max. speed of the machine in neutral: 65 cycles/minute | product dimensions (mm): l(70-220)xw(30-140)xh(12-80) - (w+h max.  180mm!) | 380v, 5.0kw, compressed air: 6 bar/0.1m³/min | machine dimensions (mm): l2180xw840xh1560 | weight (net/gross): 1100/1200kg. 1 tool/format included, tear tape dispenser included<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC CELLO WRAPPER ROTOWRAP C65-XL

CELLOPHANE WRAPPING MACHINE. CAROUSSELL TECHNOLOGY FOR LARGER SIZED PRODUCTS AND FAST PACKAGING. - TECHNICAL SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 65 CYCLES/MINUTE | PRODUCT DIMENSIONS (MM): L(70-220)XW(30-140)XH(12-80) - (W+H MAX. 180MM!) | 380V, 5.0KW, COMPRESSED AIR: 6 BAR/0.1M³/MIN | MACHINE DIMENSIONS (MM): L2180XW840XH1560 | WEIGHT (NET/GROSS): 1100/1200KG. 1 TOOL/FORMAT INCLUDED, TEAR TAPE DISPENSER INCLUDED

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-alligator shears rsm. 440

â?¢ with manual clamp
â?¢ use four knives
â?¢ plug-in profiles for forklift trucks
â?¢ operation by means of fuã?pedal#

technical data
model: rsm. 440
overall dimensions: 1750 x 762 x 1500 mm
total weight: 810 kg
blade length: 440 mm
max blade opening: 50-255 mm
cutting force: 100 t
cutting capacity: rods 50 mm (st 37)
main drive: 3 phase: 7.5 kw (10 hp)
cutting strokes p/min: 10-50 / min
 ALLIGATOR SHEARS RSM. 440 &ACIRC;?&CENT; WITH MANUAL CLAMP &ACIRC;?&CENT; USE FOUR KNIVES &ACIRC;?&CENT; PLUG-IN PROFILES FOR FORKLIFT TRUCKS &ACIRC;?&CENT; OPERATION BY MEANS OF FU&ATILDE;?PEDAL# TECHNICAL DATA MODEL: RSM. 440 OVERALL DIMENSIONS: 1750 X 762 X 1500 MM TOTAL WEIGHT: 810 KG BLADE LENGTH: 440 MM MAX BLADE OPENING: 50-255 MM CUTTING FORCE: 100 T CUTTING CAPACITY: RODS 50 MM (ST 37) MAIN DRIVE: 3 PHASE: 7.5 KW (10 HP) CUTTING STROKES P/MIN: 10-50 / MIN
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-amtec cello wrapper rotowrap c100-m<br><br>cellophane wrapping machine. caroussell technology for middle sized products and fast packaging. - technical specifications: max. speed of the machine in neutral: 100 cycles/minute | product dimensions (mm): l(40-160)xw(20-100)xh(8-45) | 380v, 4.5kw | compressed air not necessary | machine dimensions (mm): l2000xw790xh1550 | weight (net/gross): 930/1030kg. 1 tool/format included, tear tape dispenser included, infeed conveyor included<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC CELLO WRAPPER ROTOWRAP C100-M

CELLOPHANE WRAPPING MACHINE. CAROUSSELL TECHNOLOGY FOR MIDDLE SIZED PRODUCTS AND FAST PACKAGING. - TECHNICAL SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 100 CYCLES/MINUTE | PRODUCT DIMENSIONS (MM): L(40-160)XW(20-100)XH(8-45) | 380V, 4.5KW | COMPRESSED AIR NOT NECESSARY | MACHINE DIMENSIONS (MM): L2000XW790XH1550 | WEIGHT (NET/GROSS): 930/1030KG. 1 TOOL/FORMAT INCLUDED, TEAR TAPE DISPENSER INCLUDED, INFEED CONVEYOR INCLUDED

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-measurement machine tesa micro hite 3d mh3d 454
measuring movements: manual / motorized
measuring volume (mm): 460 x 510 x 420
mpee (î¼m) (l in mm): 3 + 4 l / 1000
dimensions of the measuring instrument: 970 x 930 x 1700
l x d x h (mm)
with granite table: 210
machine is only free from september 2019! MEASUREMENT MACHINE TESA MICRO HITE 3D MH3D 454 MEASURING MOVEMENTS: MANUAL / MOTORIZED MEASURING VOLUME (MM): 460 X 510 X 420 MPEE (&ICIRC;&FRAC14;M) (L IN MM): 3 + 4 L / 1000 DIMENSIONS OF THE MEASURING INSTRUMENT: 970 X 930 X 1700 L X D X H (MM) WITH GRANITE TABLE: 210 MACHINE IS ONLY FREE FROM SEPTEMBER 2019!
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.200 €
Ubicación: Land-weight approx.: 8500 kg<br/>dimensions (l x w x h) approx.: 2490 x 3850 x 2430 mm<br/>description: 2 pallet machine, pallets 400 x 400 mm, pallet load 400 kg, traverses x / y / z 560/510/510 mm, 4th axle (ncrt), rapid traverse 30 m / min, spindle insert din 69871-40 (sk40), spindle speed 100-10000 around minus 30 tools in warehouse, control mazatrol m32a, cooling through the spindle, synchronous tapping WEIGHT APPROX.: 8500 KG
DIMENSIONS (L X W X H) APPROX.: 2490 X 3850 X 2430 MM
DESCRIPTION: 2 PALLET MACHINE, PALLETS 400 X 400 MM, PALLET LOAD 400 KG, TRAVERSES X / Y / Z 560/510/510 MM, 4TH AXLE (NCRT), RAPID TRAVERSE 30 M / MIN, SPINDLE INSERT DIN 69871-40 (SK40), SPINDLE SPEED 100-10000 AROUND MINUS 30 TOOLS IN WAREHOUSE, CONTROL MAZATROL M32A, COOLING THROUGH THE SPINDLE, SYNCHRONOUS TAPPING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-2 pieces vacuum furnaces schmetz

type:					iu/3f 90 x 135 x 78, 6 bar
y.o.m.:				2008 und 2012
charge weight:			2000 kg gross
working temperature:		1350°c
heating power:				300 kw
cooling gas:			ar, he
max. quenching pressure:	6 bar (absolut) n2
					4 bar (absolut) ar
vacuum pumps:			leybold oerlikon varovac s-630-f
					leybold oerlikon ruwac ws 2001 (fine vacuum)
plc:					demig 
 2 PIECES VACUUM FURNACES SCHMETZ TYPE: IU/3F 90 X 135 X 78, 6 BAR Y.O.M.: 2008 UND 2012 CHARGE WEIGHT: 2000 KG GROSS WORKING TEMPERATURE: 1350°C HEATING POWER: 300 KW COOLING GAS: AR, HE MAX. QUENCHING PRESSURE: 6 BAR (ABSOLUT) N2 4 BAR (ABSOLUT) AR VACUUM PUMPS: LEYBOLD OERLIKON VAROVAC S-630-F LEYBOLD OERLIKON RUWAC WS 2001 (FINE VACUUM) PLC: DEMIG
Vendedor: VEI-Engineering GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 17.400 €
Ubicación: Land-weight approx.: 7250 kg<br/>dimensions (l x w x h) approx.: 5250 x 2450 x 2650 mm<br/>description: maximum turning diameter 300 mm, length between the spindles 535 mm, main spindle 4000 rpm is c axis, sub spindle 4000 rpm is 360,000 positions index, 12 position revolver, all 12 positions driven, y axis 100 mm, robot handled max around 200 x 120 mm 10 kg with pitch feed, feed table with mazatrol pc 640 mt control WEIGHT APPROX.: 7250 KG
DIMENSIONS (L X W X H) APPROX.: 5250 X 2450 X 2650 MM
DESCRIPTION: MAXIMUM TURNING DIAMETER 300 MM, LENGTH BETWEEN THE SPINDLES 535 MM, MAIN SPINDLE 4000 RPM IS C AXIS, SUB SPINDLE 4000 RPM IS 360,000 POSITIONS INDEX, 12 POSITION REVOLVER, ALL 12 POSITIONS DRIVEN, Y AXIS 100 MM, ROBOT HANDLED MAX AROUND 200 X 120 MM 10 KG WITH PITCH FEED, FEED TABLE WITH MAZATROL PC 640 MT CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-shoot to carousel sale. she has a faceplate diameter of 1000 mm and is completely conventional, 5 x revolver. 
 SHOOT TO CAROUSEL SALE. SHE HAS A FACEPLATE DIAMETER OF 1000 MM AND IS COMPLETELY CONVENTIONAL, 5 X REVOLVER.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 94.900 €
Ubicación: Land-; mileage [km]: 53500; power [ps]: 428; gross weight [kg]: 18000; transmission: automatisch; accessories: abs, bordcomputer, differentialsperre, klimaanlage, tempomat, ets - eletronische traktionskontrolle; colour: silber; wheelbase: 3900; suspension type: blatt/blatt; max payload [kg]: 5880 ; MILEAGE [KM]: 53500; POWER [PS]: 428; GROSS WEIGHT [KG]: 18000; TRANSMISSION: AUTOMATISCH; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: SILBER; WHEELBASE: 3900; SUSPENSION TYPE: BLATT/BLATT; MAX PAYLOAD [KG]: 5880
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 495 €
Ubicación: Land-23 pcs infrared halogen lamp, 1000w, 13195x / 98, philips, new
manufacturer: philips
type: infrared halogen lamp, 1000w, 13195x / 98

attention!
we calculated the lowest comparable market price for the new part and reduced it by 50% for the entire package.

new part in original packaging!
the part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation, is completely new and in its original packaging.

function guarantee!
when purchasing we agree with you a functional guarantee of 3 months. should the unit fail, we will refund the purchase price. 23 PCS INFRARED HALOGEN LAMP, 1000W, 13195X / 98, PHILIPS, NEW MANUFACTURER: PHILIPS TYPE: INFRARED HALOGEN LAMP, 1000W, 13195X / 98 ATTENTION! WE CALCULATED THE LOWEST COMPARABLE MARKET PRICE FOR THE NEW PART AND REDUCED IT BY 50% FOR THE ENTIRE PACKAGE. NEW PART IN ORIGINAL PACKAGING! THE PART WAS BOUGHT FROM A SPARE PARTS WAREHOUSE OF A COMPANY, WAS THERE FOR SOME TIME IN STOCK BUT NEVER IN OPERATION, IS COMPLETELY NEW AND IN ITS ORIGINAL PACKAGING. FUNCTION GUARANTEE! WHEN PURCHASING WE AGREE WITH YOU A FUNCTIONAL GUARANTEE OF 3 MONTHS. SHOULD THE UNIT FAIL, WE WILL REFUND THE PURCHASE PRICE.
Vendedor: IPV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeler sidel alfa rollquatro f 25 hot melt glue with auxiliaries
 
this alfa rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! rollquattro is a rotary wraparound labeler equipped with an ergonomically designed, robust and precise linear labeling station with place for two rolls of film labels. label is attached to bottle with two hot melt glue stripes. label platforms are teethed belt driven via single servo motor. this labeler has hh2 configuration which enables improved flexibility in handling bottles of different sizes and greater reliability for small bottles at very high speeds. labeler is still installed and powered and in good condition. machine comes with videojet label coding printer and metec label inspector.
 
manufacturer sidel alfa inc
labeler type: alfa rollquatro f25 12t/sr/hh2 s1/e1
gluing system hot glue stripes
manufacturing year 2006
capacity 42000 bph
carousel diameter 720 mm
number of labeling stations 18
bottle diameter 53 - 110 mm
pitch 126 mm
label min-max length 177 - 355 mm
electric power 36 kw
in jet coder videojet 1620
label inspector metec promecon 2000   LABELER SIDEL ALFA ROLLQUATRO F 25 HOT MELT GLUE WITH AUXILIARIES THIS ALFA ROLLQUATRO LABELER WAS INSTALLED IN 2006 AND IT WAS OPERATED TIME TO TIME TILL 2014 TOTAL OPERATING HOURS NOT EXCEEDING 10 000 HOURS! ROLLQUATTRO IS A ROTARY WRAPAROUND LABELER EQUIPPED WITH AN ERGONOMICALLY DESIGNED, ROBUST AND PRECISE LINEAR LABELING STATION WITH PLACE FOR TWO ROLLS OF FILM LABELS. LABEL IS ATTACHED TO BOTTLE WITH TWO HOT MELT GLUE STRIPES. LABEL PLATFORMS ARE TEETHED BELT DRIVEN VIA SINGLE SERVO MOTOR. THIS LABELER HAS HH2 CONFIGURATION WHICH ENABLES IMPROVED FLEXIBILITY IN HANDLING BOTTLES OF DIFFERENT SIZES AND GREATER RELIABILITY FOR SMALL BOTTLES AT VERY HIGH SPEEDS. LABELER IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MACHINE COMES WITH VIDEOJET LABEL CODING PRINTER AND METEC LABEL INSPECTOR. MANUFACTURER SIDEL ALFA INC LABELER TYPE: ALFA ROLLQUATRO F25 12T/SR/HH2 S1/E1 GLUING SYSTEM HOT GLUE STRIPES MANUFACTURING YEAR 2006 CAPACITY 42000 BPH CAROUSEL DIAMETER 720 MM NUMBER OF LABELING STATIONS 18 BOTTLE DIAMETER 53 - 110 MM PITCH 126 MM LABEL MIN-MAX LENGTH 177 - 355 MM ELECTRIC POWER 36 KW IN JET CODER VIDEOJET 1620 LABEL INSPECTOR METEC PROMECON 2000
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line sig simonazzi 23 000 bph - 2002/2013
 
this line is a complete pet line for beer, carbonated and non carbonated drinks. the line iwas delivered in 2002 by sig simonazzi and it was upgraded in 2011/2013. currently line is installed and powered and it is designed for 1.0 & 1.5 liter with capacity of 23 000 bph.
 
main characteristics
- manufactured in year 2002 upgrade 2011/2013
- capacity 23 000 bph in 1.0 and 1.5 l containers
- total operating hours 38500
- equipment is in very good condition, still installed but ready for immediate relocation.

list of main equipment:
1. pet stretch blow machine blomax 16 sig, (operating hours 38217) with
a. sig box tipper for emptying preform containers
b. preform feeding elevator vzt-2510 with a hopper
c. preform orientator - feeding system
d. water chiller riedel pc 1000 refrigerant r407c
2. blower automatic lubrication system pet 2, year 2009
3. air conveyor system
4. beer analyzer year 2005
5. flash pasteurizer alfa-laval 400 hl/h with vt 40 bc 25 heat exhanger and buffer tank
6. block rinser simonazzi 60 p113 with 60 rinsing heads
7. filling block sig simonazzi tvr eurostar 2000 year 2002, upgrade 2010&2011with arol cap feeding system
8. automatic cip line for filling block
9. filling inspector
10. labeling machine krones prontomatic
11. bottles conveyor, simonazzi
12. laser marker videojet vj3430 year 2010
13. shrink packer smi sk 600t, year 2002 upgrade 2013
14. conveyor system simonazzi for packages
15. printer applicator stay tr602 solv mektek, year 2009, upgrade 2013 (two step marking the front and back)
16. printer-applicator tv102 mectec year2012
17. palletizer simonazzi with pack orienting system
18. pallet stretch wrapping machine robopak genesis, year 2002 upgrade 2012
19. label applicator domino collamat, year 2011   PET BOTTLE FILLING LINE SIG SIMONAZZI 23 000 BPH - 2002/2013 THIS LINE IS A COMPLETE PET LINE FOR BEER, CARBONATED AND NON CARBONATED DRINKS. THE LINE IWAS DELIVERED IN 2002 BY SIG SIMONAZZI AND IT WAS UPGRADED IN 2011/2013. CURRENTLY LINE IS INSTALLED AND POWERED AND IT IS DESIGNED FOR 1.0 & 1.5 LITER WITH CAPACITY OF 23 000 BPH. MAIN CHARACTERISTICS - MANUFACTURED IN YEAR 2002 UPGRADE 2011/2013 - CAPACITY 23 000 BPH IN 1.0 AND 1.5 L CONTAINERS - TOTAL OPERATING HOURS 38500 - EQUIPMENT IS IN VERY GOOD CONDITION, STILL INSTALLED BUT READY FOR IMMEDIATE RELOCATION. LIST OF MAIN EQUIPMENT: 1. PET STRETCH BLOW MACHINE BLOMAX 16 SIG, (OPERATING HOURS 38217) WITH A. SIG BOX TIPPER FOR EMPTYING PREFORM CONTAINERS B. PREFORM FEEDING ELEVATOR VZT-2510 WITH A HOPPER C. PREFORM ORIENTATOR - FEEDING SYSTEM D. WATER CHILLER RIEDEL PC 1000 REFRIGERANT R407C 2. BLOWER AUTOMATIC LUBRICATION SYSTEM PET 2, YEAR 2009 3. AIR CONVEYOR SYSTEM 4. BEER ANALYZER YEAR 2005 5. FLASH PASTEURIZER ALFA-LAVAL 400 HL/H WITH VT 40 BC 25 HEAT EXHANGER AND BUFFER TANK 6. BLOCK RINSER SIMONAZZI 60 P113 WITH 60 RINSING HEADS 7. FILLING BLOCK SIG SIMONAZZI TVR EUROSTAR 2000 YEAR 2002, UPGRADE 2010&2011WITH AROL CAP FEEDING SYSTEM 8. AUTOMATIC CIP LINE FOR FILLING BLOCK 9. FILLING INSPECTOR 10. LABELING MACHINE KRONES PRONTOMATIC 11. BOTTLES CONVEYOR, SIMONAZZI 12. LASER MARKER VIDEOJET VJ3430 YEAR 2010 13. SHRINK PACKER SMI SK 600T, YEAR 2002 UPGRADE 2013 14. CONVEYOR SYSTEM SIMONAZZI FOR PACKAGES 15. PRINTER APPLICATOR STAY TR602 SOLV MEKTEK, YEAR 2009, UPGRADE 2013 (TWO STEP MARKING THE FRONT AND BACK) 16. PRINTER-APPLICATOR TV102 MECTEC YEAR2012 17. PALLETIZER SIMONAZZI WITH PACK ORIENTING SYSTEM 18. PALLET STRETCH WRAPPING MACHINE ROBOPAK GENESIS, YEAR 2002 UPGRADE 2012 19. LABEL APPLICATOR DOMINO COLLAMAT, YEAR 2011
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-filler monoblock for 5 liter pet bottles khs innofill dvf 84/9sv pet

this volumetric pet bottler filler was manufactured by khs in 2006 and it has been used for filling beer in 5 liter pet bottles and it is suitable also for filling csd. this filler has capacity of 7000 x 5 liter pet bottles beer in an hour and it has been used very limited hours, around 10 000 hours only and it is in excellent condition. the filler comes with full bottle inspection system.

technical data
manufactured by khs in 2006
monobloc capacity 7 000 x 5 liter pet / hour
pet bottle used 5 liter with pco 34 mm closure
filler type khs innofill dvf 84/9sv pet with 84 filling valves
rinser khs innoclean fr-zmv 30/60 pet with 30 rinsing position
cap closing unit khs 9 stations 34 mm screw cap
cap loading unit magnettechnik corkmaster
filling inspector metec p4000, fms-r(uf)   FILLER MONOBLOCK FOR 5 LITER PET BOTTLES KHS INNOFILL DVF 84/9SV PET THIS VOLUMETRIC PET BOTTLER FILLER WAS MANUFACTURED BY KHS IN 2006 AND IT HAS BEEN USED FOR FILLING BEER IN 5 LITER PET BOTTLES AND IT IS SUITABLE ALSO FOR FILLING CSD. THIS FILLER HAS CAPACITY OF 7000 X 5 LITER PET BOTTLES BEER IN AN HOUR AND IT HAS BEEN USED VERY LIMITED HOURS, AROUND 10 000 HOURS ONLY AND IT IS IN EXCELLENT CONDITION. THE FILLER COMES WITH FULL BOTTLE INSPECTION SYSTEM. TECHNICAL DATA MANUFACTURED BY KHS IN 2006 MONOBLOC CAPACITY 7 000 X 5 LITER PET / HOUR PET BOTTLE USED 5 LITER WITH PCO 34 MM CLOSURE FILLER TYPE KHS INNOFILL DVF 84/9SV PET WITH 84 FILLING VALVES RINSER KHS INNOCLEAN FR-ZMV 30/60 PET WITH 30 RINSING POSITION CAP CLOSING UNIT KHS 9 STATIONS 34 MM SCREW CAP CAP LOADING UNIT MAGNETTECHNIK CORKMASTER FILLING INSPECTOR METEC P4000, FMS-R(UF)
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-wrap-around labeling machine krones canmatic 960-28 52800 bph

this machine was installed in 2005 and it is still running and available in september 2016. total running hours today being around 40 000. the labeler is currently working with 0.5, 0.6 and 1.5 liter pet bottles with pre-cut wrap-around polypropylene labels. label material is polypropylene which was attached with two stripes of hot glue on both end of the label. labeler has one precut label feeding station and two hot glue stations and 28 container stations. container rotating is made with teethed plastic belt.

technical data
machine manufacturer: krones ag
manufacturer's type: canmatic 960 - 28
year of manufacturing: 2005
operating hours approx 40 000
label type polypropylene, wrap-around
container table pitch 960 mm
number of container tables 28
glue hot glue, leading and trailing edge gluing
rated output: 52800 bph
alignment: parallel arrangement
electric power 460 v / 60 hz   WRAP-AROUND LABELING MACHINE KRONES CANMATIC 960-28 52800 BPH THIS MACHINE WAS INSTALLED IN 2005 AND IT IS STILL RUNNING AND AVAILABLE IN SEPTEMBER 2016. TOTAL RUNNING HOURS TODAY BEING AROUND 40 000. THE LABELER IS CURRENTLY WORKING WITH 0.5, 0.6 AND 1.5 LITER PET BOTTLES WITH PRE-CUT WRAP-AROUND POLYPROPYLENE LABELS. LABEL MATERIAL IS POLYPROPYLENE WHICH WAS ATTACHED WITH TWO STRIPES OF HOT GLUE ON BOTH END OF THE LABEL. LABELER HAS ONE PRECUT LABEL FEEDING STATION AND TWO HOT GLUE STATIONS AND 28 CONTAINER STATIONS. CONTAINER ROTATING IS MADE WITH TEETHED PLASTIC BELT. TECHNICAL DATA MACHINE MANUFACTURER: KRONES AG MANUFACTURER'S TYPE: CANMATIC 960 - 28 YEAR OF MANUFACTURING: 2005 OPERATING HOURS APPROX 40 000 LABEL TYPE POLYPROPYLENE, WRAP-AROUND CONTAINER TABLE PITCH 960 MM NUMBER OF CONTAINER TABLES 28 GLUE HOT GLUE, LEADING AND TRAILING EDGE GLUING RATED OUTPUT: 52800 BPH ALIGNMENT: PARALLEL ARRANGEMENT ELECTRIC POWER 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ARO types: