2728 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-tip height: 300 / 330 mm
top width: 3000 mm
speed range: 12-600 rpm
spindle bore: 83 mm
total power: 7.5 kw / 380 v
machine weight: about 5000 kg

equipment / accessories

4 jaw chuck
1 festst. lynette
mitlfd. lathe
4 way toolpost
chip protection tray
coolant system

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in our factory under power.
 TIP HEIGHT: 300 / 330 MM TOP WIDTH: 3000 MM SPEED RANGE: 12-600 RPM SPINDLE BORE: 83 MM TOTAL POWER: 7.5 KW / 380 V MACHINE WEIGHT: ABOUT 5000 KG EQUIPMENT / ACCESSORIES 4 JAW CHUCK 1 FESTST. LYNETTE MITLFD. LATHE 4 WAY TOOLPOST CHIP PROTECTION TRAY COOLANT SYSTEM ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; gross weight [kg]: 16000; engine: mercedes om442a; accessories: 15 meter 250mm pipes ; GROSS WEIGHT [KG]: 16000; ENGINE: MERCEDES OM442A; ACCESSORIES: 15 METER 250MM PIPES
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 45.000 €
Ubicación: Land-control                                   heidenhain plus it
circular diameter max.                    505 mm 
swing over plan guide                     375 mm 
travel plan (x)                           250 mm
longitudinal travel (z)                   635 mm 
spindle integrated spindle motor, power 40/100%ed 28/21 kw 
spindle head (flat flange)                5 170 h 
spindle diameter in front bearing         130 mm 
torque max (40 / 100%)                    320/240 nm
speed range                          25-5,000 rpm
number of tool stations of the tool carrier 12
shank according to din 69880              30 mm
tailstock hub automatically movable      580 mm
weight of the machine with chip conveyor 5,600 kg
dimensions l/w/h 4,3 m / 2,022 m / 1.77 m

accessories: feeder imeca master 880 mp-e

 CONTROL HEIDENHAIN PLUS IT CIRCULAR DIAMETER MAX. 505 MM SWING OVER PLAN GUIDE 375 MM TRAVEL PLAN (X) 250 MM LONGITUDINAL TRAVEL (Z) 635 MM SPINDLE INTEGRATED SPINDLE MOTOR, POWER 40/100%ED 28/21 KW SPINDLE HEAD (FLAT FLANGE) 5 170 H SPINDLE DIAMETER IN FRONT BEARING 130 MM TORQUE MAX (40 / 100%) 320/240 NM SPEED RANGE 25-5,000 RPM NUMBER OF TOOL STATIONS OF THE TOOL CARRIER 12 SHANK ACCORDING TO DIN 69880 30 MM TAILSTOCK HUB AUTOMATICALLY MOVABLE 580 MM WEIGHT OF THE MACHINE WITH CHIP CONVEYOR 5,600 KG DIMENSIONS L/W/H 4,3 M / 2,022 M / 1.77 M ACCESSORIES: FEEDER IMECA MASTER 880 MP-E
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-; gross weight [kg]: 6600; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6600; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-

complete krones pet water filling line

line in production

brand name : krones
year : 2007-2006 ,  
capacity is  36,000bhp. 
krones  2007key assetkrones blowing machine air conditionerhandheld thermal imager 
krones blowing machine
air compressorblowing machine coveyerkrones 550ml 
moulding krones , 600ml 
moulding krones 
coveyer  krones 

filling machine krones 
labeller film wrapping machinewater treatment line.
air compressor weigh checking jet ink printer cip system coveyer dryer beltliquid nitrogen machine  
krones water level check packing machine  
krones filterlable checker  krones control cabinet 
krones full automatic sprinkling device laser marker led counterkrones scale  krones vernier caliper  
for the krones water line, 36,000bph, 
built in 2007, still running. any questions, please let me know. 
ask for picttures.

rgds
     COMPLETE KRONES PET WATER FILLING LINE LINE IN PRODUCTION BRAND NAME : KRONES YEAR : 2007-2006 , CAPACITY IS 36,000BHP. KRONES 2007KEY ASSETKRONES BLOWING MACHINE AIR CONDITIONERHANDHELD THERMAL IMAGER KRONES BLOWING MACHINE AIR COMPRESSORBLOWING MACHINE COVEYERKRONES 550ML MOULDING KRONES , 600ML MOULDING KRONES COVEYER KRONES FILLING MACHINE KRONES LABELLER FILM WRAPPING MACHINEWATER TREATMENT LINE. AIR COMPRESSOR WEIGH CHECKING JET INK PRINTER CIP SYSTEM COVEYER DRYER BELTLIQUID NITROGEN MACHINE KRONES WATER LEVEL CHECK PACKING MACHINE KRONES FILTERLABLE CHECKER KRONES CONTROL CABINET KRONES FULL AUTOMATIC SPRINKLING DEVICE LASER MARKER LED COUNTERKRONES SCALE KRONES VERNIER CALIPER FOR THE KRONES WATER LINE, 36,000BPH, BUILT IN 2007, STILL RUNNING. ANY QUESTIONS, PLEASE LET ME KNOW. ASK FOR PICTTURES. RGDS
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-bystronic xpert 200x4100 (2012)

overview
brand: bystronic
model: xpert 200x4100
application type: bending
machine type: bending machines
availability: immediately
production year: 2012
location: italy
origin country: germany
production hours: 12567

general data
machine weight: 17600 kg

control unit
interface: microsoft windows xp

main drive
pressing force: 2000 kn
bending length: 4100 mm
main motor power: 18.5 kw
stroke: 415 mm

media
main electronic connection: 400 v
power consumption: 22 kw
air pressure: 8 bar

additional equipment
1: tools
2: fast bend+  BYSTRONIC XPERT 200X4100 (2012) OVERVIEW BRAND: BYSTRONIC MODEL: XPERT 200X4100 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2012 LOCATION: ITALY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 12567 GENERAL DATA MACHINE WEIGHT: 17600 KG CONTROL UNIT INTERFACE: MICROSOFT WINDOWS XP MAIN DRIVE PRESSING FORCE: 2000 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 18.5 KW STROKE: 415 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 22 KW AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS 2: FAST BEND+
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-code: 0475
brand: striebig
model: standard trk 6220  - ce standard 

manual vertical panel saw   - ce standard 

integrated vacuum system
large wood supporting surface with  n°6  pre-defined cutting points  for  vertical cut - the horizontal cut is possible in any position. the wood support is movable in vertical  and automatically moves  depending on the blade position
lenght of cut mm 5300
height of cut mm 2200
depth of cut  mm 80
supporting rollers for panels movement 
locking device for small parts 
blade diameter mm 300  - hole  30
speed  4750   rpm 
motor power  kw 5,5 - exhaust outlet diameter mm 160
overall dimensions mounted machine  : mm 6675 x  1600 x  3000 h 
weight kg  950 CODE: 0475 BRAND: STRIEBIG MODEL: STANDARD TRK 6220 - CE STANDARD MANUAL VERTICAL PANEL SAW - CE STANDARD INTEGRATED VACUUM SYSTEM LARGE WOOD SUPPORTING SURFACE WITH N°6 PRE-DEFINED CUTTING POINTS FOR VERTICAL CUT - THE HORIZONTAL CUT IS POSSIBLE IN ANY POSITION. THE WOOD SUPPORT IS MOVABLE IN VERTICAL AND AUTOMATICALLY MOVES DEPENDING ON THE BLADE POSITION LENGHT OF CUT MM 5300 HEIGHT OF CUT MM 2200 DEPTH OF CUT MM 80 SUPPORTING ROLLERS FOR PANELS MOVEMENT LOCKING DEVICE FOR SMALL PARTS BLADE DIAMETER MM 300 - HOLE 30 SPEED 4750 RPM MOTOR POWER KW 5,5 - EXHAUST OUTLET DIAMETER MM 160 OVERALL DIMENSIONS MOUNTED MACHINE : MM 6675 X 1600 X 3000 H WEIGHT KG 950
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-
machine type cnc lathe - inclined bed machine make schaublin type 110 cnc built 1998 control type cnc storage france country of origin switzerland delivery immediately cargo base stock technical details

turning diameter 420 mm turning length 300 mm control fanuc 18 t c-axis 0.001 degree speed 1750-5000 r/min turret 8 powered tools turning diameter over bed 420 mm additional information

turning diameter over bed 420 mm
 spindle bore 32 mm
 turning diameter 120 mm
 sled:
 longitudinal travel (z axis) 300 mm
 plan travel (x-axis) 180 mm
 c axis live tools turret sled: number 1
 number of positions revolver 8
 driven tools revolver 8
 spindle retainer:
 camlock
 spindle speeds:
 continuously variable
 30 rpm
 up to 5000 rpm
 without reitstock-:

feeds:
 continuously variable
 length of 0 mm/min
 up to 10000 mm/min
 map of 0 mm/min
 up to 6000 mm/min
 rapid traverse 12 m / min
 connection 50 hz 3 x 380 volt
 kw spindle motor 150 100%
 total power consumption 18 kva
 machine weight 3250 kg

miscellaneous accessories:
 clamping tongs recording
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 workpiece remover
 chip conveyor / / tensioning clamp device
 10 piece tool holder
 5 powered holder
 rod loader samsys 3000 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE SCHAUBLIN TYPE 110 CNC BUILT 1998 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN SWITZERLAND DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS TURNING DIAMETER 420 MM TURNING LENGTH 300 MM CONTROL FANUC 18 T C-AXIS 0.001 DEGREE SPEED 1750-5000 R/MIN TURRET 8 POWERED TOOLS TURNING DIAMETER OVER BED 420 MM ADDITIONAL INFORMATION TURNING DIAMETER OVER BED 420 MM SPINDLE BORE 32 MM TURNING DIAMETER 120 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 300 MM PLAN TRAVEL (X-AXIS) 180 MM C AXIS LIVE TOOLS TURRET SLED: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 DRIVEN TOOLS REVOLVER 8 SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE 30 RPM UP TO 5000 RPM WITHOUT REITSTOCK-: FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0 MM/MIN UP TO 10000 MM/MIN MAP OF 0 MM/MIN UP TO 6000 MM/MIN RAPID TRAVERSE 12 M / MIN CONNECTION 50 HZ 3 X 380 VOLT KW SPINDLE MOTOR 150 100% TOTAL POWER CONSUMPTION 18 KVA MACHINE WEIGHT 3250 KG MISCELLANEOUS ACCESSORIES: CLAMPING TONGS RECORDING LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 WORKPIECE REMOVER CHIP CONVEYOR / / TENSIONING CLAMP DEVICE 10 PIECE TOOL HOLDER 5 POWERED HOLDER ROD LOADER SAMSYS 3000
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land-
machine type cnc lathe make nakamura type sc 300 built 1997 3 axis control type cnc storage france country of origin japan delivery time upon request from site of cargo base ex work technical details
turning diameter 350 mm turning length 600 mm cnc fanuc 21 t turning diameter over slide 300 mm speed 3500 r/min rapid traverse 20 / 25 (x, z) m/min power 22 kw additional information
it very good preserved machine with fanuc 21
 3 axis machine
 drehlange 600 12 expert revolver type japanese
 10 fixed holder 4 powered holder
 spaenefoederer
 feed dia 250mm
 accessories baking + holder  MACHINE TYPE CNC LATHE MAKE NAKAMURA TYPE SC 300 BUILT 1997 3 AXIS CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY TIME UPON REQUEST FROM SITE OF CARGO BASE EX WORK TECHNICAL DETAILS TURNING DIAMETER 350 MM TURNING LENGTH 600 MM CNC FANUC 21 T TURNING DIAMETER OVER SLIDE 300 MM SPEED 3500 R/MIN RAPID TRAVERSE 20 / 25 (X, Z) M/MIN POWER 22 KW ADDITIONAL INFORMATION IT VERY GOOD PRESERVED MACHINE WITH FANUC 21 3 AXIS MACHINE DREHLANGE 600 12 EXPERT REVOLVER TYPE JAPANESE 10 FIXED HOLDER 4 POWERED HOLDER SPAENEFOEDERER FEED DIA 250MM ACCESSORIES BAKING + HOLDER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-engine details

stock number 1105-02499 machine type cnc lathe - inclined bed machine make gildemeister type ctx 320 v6 built in 2003 control type cnc storage france country of origin germany delivery immediately from stock of based on cargo from site work technical details

turning diameter 505 mm turning length 450 mm control siemens 840 d shop mill lining diameter 210 mm rod diameter 51 mm turning diameter over bed slide 375 x way 213 mm z-axis 450 mm spindle speeds 25-6000 rpm spindle motor 16 / 12 kw torque on the s pindel 153 / 115 nm rapid traverse - longitudinal/plan 60/12/45 m / min c-axis 0.001 / 360 Ⱐnumber of driven tools 12 mm 㸠30 mm power 9 / 6.7 kw speed range 4500 / 4000 kw/rpm total power requirement 29 machine weight approx. 3.7 tonnes of space c a. 3.0 x 2.2 x 2.0 m accessories main and sub spindle yes and y axis c - axis 0.001 Ⱐfor main u.gegenspindel y - axis +-40 mm 12 angetr. coolant system chip conveyor additional information tools

well preserved machine
 with counter spindle
 4 axis machine
 c axis and y axe
 5 live tools + 10 fixed tools
 spaenefoerderer
 cnc siemens 840 d shop mill ENGINE DETAILS STOCK NUMBER 1105-02499 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE GILDEMEISTER TYPE CTX 320 V6 BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY FROM STOCK OF BASED ON CARGO FROM SITE WORK TECHNICAL DETAILS TURNING DIAMETER 505 MM TURNING LENGTH 450 MM CONTROL SIEMENS 840 D SHOP MILL LINING DIAMETER 210 MM ROD DIAMETER 51 MM TURNING DIAMETER OVER BED SLIDE 375 X WAY 213 MM Z-AXIS 450 MM SPINDLE SPEEDS 25-6000 RPM SPINDLE MOTOR 16 / 12 KW TORQUE ON THE S PINDEL 153 / 115 NM RAPID TRAVERSE - LONGITUDINAL/PLAN 60/12/45 M / MIN C-AXIS 0.001 / 360 ° NUMBER OF DRIVEN TOOLS 12 MM ø 30 MM POWER 9 / 6.7 KW SPEED RANGE 4500 / 4000 KW/RPM TOTAL POWER REQUIREMENT 29 MACHINE WEIGHT APPROX. 3.7 TONNES OF SPACE C A. 3.0 X 2.2 X 2.0 M ACCESSORIES MAIN AND SUB SPINDLE YES AND Y AXIS C - AXIS 0.001 ° FOR MAIN U.GEGENSPINDEL Y - AXIS +-40 MM 12 ANGETR. COOLANT SYSTEM CHIP CONVEYOR ADDITIONAL INFORMATION TOOLS WELL PRESERVED MACHINE WITH COUNTER SPINDLE 4 AXIS MACHINE C AXIS AND Y AXE 5 LIVE TOOLS + 10 FIXED TOOLS SPAENEFOERDERER CNC SIEMENS 840 D SHOP MILL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 5.800 €
Ubicación: Land-it is a used kemper abwieger type imperator ii fÖ - stainless steel for sale. the weighing unit was reconditioned two years ago. the machine works exactly the weight.
-weight range: 300gr. -1700gr.
-continuously variable drive via frequency inverter
-hourly output: 600-1500 pieces per hour - dough hopper with a capacity of 200 kg dough
-power: 1,5 kw
-weight: net 640 kg
the machine is immediately available.
on request, a video can be sent to from the test run.  IT IS A USED KEMPER ABWIEGER TYPE IMPERATOR II FÖ - STAINLESS STEEL FOR SALE. THE WEIGHING UNIT WAS RECONDITIONED TWO YEARS AGO. THE MACHINE WORKS EXACTLY THE WEIGHT. -WEIGHT RANGE: 300GR. -1700GR. -CONTINUOUSLY VARIABLE DRIVE VIA FREQUENCY INVERTER -HOURLY OUTPUT: 600-1500 PIECES PER HOUR - DOUGH HOPPER WITH A CAPACITY OF 200 KG DOUGH -POWER: 1,5 KW -WEIGHT: NET 640 KG THE MACHINE IS IMMEDIATELY AVAILABLE. ON REQUEST, A VIDEO CAN BE SENT TO FROM THE TEST RUN.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-heating are length: 4950mm, inlet height: 840mm, conveying direction: left to right, heating: ir-radiators/ convection, number of heating zones: 11x 450mm, software: seho maxireflow, workpiece height top/ bottom: 120/ 40mm, nominal power: 53kw, length: 6600mm, machine was scarcely used.  HEATING ARE LENGTH: 4950MM, INLET HEIGHT: 840MM, CONVEYING DIRECTION: LEFT TO RIGHT, HEATING: IR-RADIATORS/ CONVECTION, NUMBER OF HEATING ZONES: 11X 450MM, SOFTWARE: SEHO MAXIREFLOW, WORKPIECE HEIGHT TOP/ BOTTOM: 120/ 40MM, NOMINAL POWER: 53KW, LENGTH: 6600MM, MACHINE WAS SCARCELY USED.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-description
brand	ekobal
model	ekosack 50
id	0083
status	active
price	1.400 € + vat
year of manufacture	2007
location	oradea (ro)

hydraulic baling press ekobal ekopack 50 manufactured in 2007 for waste products. technical specifications: total dimensions (l x l x h): 855 x 680 x 1950 mm. bale dimensions (l x l x h): 600 x 400 x (300-700) mm. maximum bale weight: 40-70 kg. maximum pressure 5 tons ± 5%. surface pressure: 208 kpa. room dimensions (l x w x h): 600 x 400 x 900 mm. pressure compressor capacity: 0.216 m3, type of pressing chamber: interchangeable, stow-away, number of binding slots 2. pressing time: 25 s. power: 1.5 kw, voltage: 3 x 400 v / 50 hz, electrical protection: ip 54, hydraulically driven, machine weight: 310 kg.

exworks. price is negotiable. 


technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. 
hablamos español. beszélünk magyarul.

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND EKOBAL MODEL EKOSACK 50 ID 0083 STATUS ACTIVE PRICE 1.400 € + VAT YEAR OF MANUFACTURE 2007 LOCATION ORADEA (RO) HYDRAULIC BALING PRESS EKOBAL EKOPACK 50 MANUFACTURED IN 2007 FOR WASTE PRODUCTS. TECHNICAL SPECIFICATIONS: TOTAL DIMENSIONS (L X L X H): 855 X 680 X 1950 MM. BALE DIMENSIONS (L X L X H): 600 X 400 X (300-700) MM. MAXIMUM BALE WEIGHT: 40-70 KG. MAXIMUM PRESSURE 5 TONS ± 5%. SURFACE PRESSURE: 208 KPA. ROOM DIMENSIONS (L X W X H): 600 X 400 X 900 MM. PRESSURE COMPRESSOR CAPACITY: 0.216 M3, TYPE OF PRESSING CHAMBER: INTERCHANGEABLE, STOW-AWAY, NUMBER OF BINDING SLOTS 2. PRESSING TIME: 25 S. POWER: 1.5 KW, VOLTAGE: 3 X 400 V / 50 HZ, ELECTRICAL PROTECTION: IP 54, HYDRAULICALLY DRIVEN, MACHINE WEIGHT: 310 KG. EXWORKS. PRICE IS NEGOTIABLE. TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9600; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9600; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cnc vertical lathe fabr.jungenthal type: ju8f bj. 1980
modenisiert in 2005 with new cabinet and control
heidenhain manual plus 4110.

turning diameter max: 930 mm
circular diameter max: 1100 mm
rotation length max: 600mm

face plate: 800 mm

spindle speeds: 0-300u/min
spindle motor: 70kw

complete documentation available. CNC VERTICAL LATHE FABR.JUNGENTHAL TYPE: JU8F BJ. 1980 MODENISIERT IN 2005 WITH NEW CABINET AND CONTROL HEIDENHAIN MANUAL PLUS 4110. TURNING DIAMETER MAX: 930 MM CIRCULAR DIAMETER MAX: 1100 MM ROTATION LENGTH MAX: 600MM FACE PLATE: 800 MM SPINDLE SPEEDS: 0-300U/MIN SPINDLE MOTOR: 70KW COMPLETE DOCUMENTATION AVAILABLE.
Vendedor: IMDAT-WERKZEUGMASCHINENHANDEL
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 1860; rear tyres remaining: 89; front tyres remaining: 89; inspection date: 2018; amount of previous owners: 1; lift height[mm]: 1600; maximum lift capacity [kg]: 200; full service history: ja ; GROSS WEIGHT [KG]: 1860; REAR TYRES REMAINING: 89; FRONT TYRES REMAINING: 89; INSPECTION DATE: 2018; AMOUNT OF PREVIOUS OWNERS: 1; LIFT HEIGHT[MM]: 1600; MAXIMUM LIFT CAPACITY [KG]: 200; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-
description
brand	lux
model	l3-vk
id	0081
status	active
price	1.400 € + vat
year of manufacture	2007
location	oradea (ro)

single-chamber vertical packing press with replaceable chamber lux l3-vk made in 2007. the press is used for pressing waste materials such as paper, cardboard, foil, fabrics, plastics, etc. technical parameters of the press: dimensions total (w x h x d) 833 x 637 x 2005 mm, chamber size (w x d x h) 600 x 400 x 920 mm, package size (w x h x d) 600 x 400 x 500 mm, bale weight 25-60 kg (depending on material), pressing force 3 t, pressing time 25 s, stroke 600 mm. power consumption 1.5 kw. voltage 230 v. weight of the press 230 kg. tilting the bale by hand.

manufacturers' website: abcs://abc.lux-ptz.com/en/products/baling-presses-3-12-t-of-pressure/l3-vk-2/

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.

 DESCRIPTION BRAND LUX MODEL L3-VK ID 0081 STATUS ACTIVE PRICE 1.400 € + VAT YEAR OF MANUFACTURE 2007 LOCATION ORADEA (RO) SINGLE-CHAMBER VERTICAL PACKING PRESS WITH REPLACEABLE CHAMBER LUX L3-VK MADE IN 2007. THE PRESS IS USED FOR PRESSING WASTE MATERIALS SUCH AS PAPER, CARDBOARD, FOIL, FABRICS, PLASTICS, ETC. TECHNICAL PARAMETERS OF THE PRESS: DIMENSIONS TOTAL (W X H X D) 833 X 637 X 2005 MM, CHAMBER SIZE (W X D X H) 600 X 400 X 920 MM, PACKAGE SIZE (W X H X D) 600 X 400 X 500 MM, BALE WEIGHT 25-60 KG (DEPENDING ON MATERIAL), PRESSING FORCE 3 T, PRESSING TIME 25 S, STROKE 600 MM. POWER CONSUMPTION 1.5 KW. VOLTAGE 230 V. WEIGHT OF THE PRESS 230 KG. TILTING THE BALE BY HAND. MANUFACTURERS' WEBSITE: ABCS://ABC.LUX-PTZ.COM/EN/PRODUCTS/BALING-PRESSES-3-12-T-OF-PRESSURE/L3-VK-2/ EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 24.800 €
Ubicación: Land-; power [ps]: 190; front tyre size: 600/65-28; rear tyre size: 710/70-38; accessories: fronthydraulik, steuergerät - doppelt wirkend (3x), druckluftbremse, elektronische hubwerksregelung (ehr), kriechgang, diesel; top speed [km/h]: 30 ; POWER [PS]: 190; FRONT TYRE SIZE: 600/65-28; REAR TYRE SIZE: 710/70-38; ACCESSORIES: FRONTHYDRAULIK, STEUERGERäT - DOPPELT WIRKEND (3X), DRUCKLUFTBREMSE, ELEKTRONISCHE HUBWERKSREGELUNG (EHR), KRIECHGANG, DIESEL; TOP SPEED [KM/H]: 30
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-type of machine: center lathe,
manufacturer: femaru,
model: mve 280 m (hungary),
year: circa 1965,.
condition: ready for use.
type of offer: used machine,
  .,.	
technical data:.
tip height: 300/330 mm,
top width: 3000 mm,
spindle bore: 83 mm,
spindle speed: 12-600 rpm,.
drive: 7,5 kw,
weight: 5000 kg,
  .,.
the machine is in ready for user shape. it can be visited and demonstrated at our location.,
  .,.
we will be pleased if your take an interest in our offer.  .,.
  TYPE OF MACHINE: CENTER LATHE, MANUFACTURER: FEMARU, MODEL: MVE 280 M (HUNGARY), YEAR: CIRCA 1965,. CONDITION: READY FOR USE. TYPE OF OFFER: USED MACHINE, .,. TECHNICAL DATA:. TIP HEIGHT: 300/330 MM, TOP WIDTH: 3000 MM, SPINDLE BORE: 83 MM, SPINDLE SPEED: 12-600 RPM,. DRIVE: 7,5 KW, WEIGHT: 5000 KG, .,. THE MACHINE IS IN READY FOR USER SHAPE. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION., .,. WE WILL BE PLEASED IF YOUR TAKE AN INTEREST IN OUR OFFER. .,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-; power [ps]: 4; gross weight [kg]: 600; engine: hatz es 75 ; POWER [PS]: 4; GROSS WEIGHT [KG]: 600; ENGINE: HATZ ES 75
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-make: arburg
type: 420s-800-150 year of production: 2000
machine number: 179595 control: selogica
location: poland
country of origin: germany
		
	
technical data
	
screw diameter: 30 mm
displacement: 78 cc
shot weight: 65 g
injection pressure: 2200 bar
		
clamping force: 800 kn
tie bar distance: 420 x 420 mm
aufspannplattengrosse: 638 x 638 mm
tool mounting high.: 250 mm
offnungsweg: 450 mm
plate distance max: 700 mm
		
: kw 22.4
hours of operation: 82.312 h
weight: 3,630 kg + 300 kg (robot)
		
facilities
	
language: german
bedinungseinleitung: yes
	
+ robot multilift h, b.j. 2000, no. 600006, selogica
 x/y/z p100/.../p600
a/b/c... / 90â°/ 90â° 
 MAKE: ARBURG TYPE: 420S-800-150 YEAR OF PRODUCTION: 2000 MACHINE NUMBER: 179595 CONTROL: SELOGICA LOCATION: POLAND COUNTRY OF ORIGIN: GERMANY TECHNICAL DATA SCREW DIAMETER: 30 MM DISPLACEMENT: 78 CC SHOT WEIGHT: 65 G INJECTION PRESSURE: 2200 BAR CLAMPING FORCE: 800 KN TIE BAR DISTANCE: 420 X 420 MM AUFSPANNPLATTENGROSSE: 638 X 638 MM TOOL MOUNTING HIGH.: 250 MM OFFNUNGSWEG: 450 MM PLATE DISTANCE MAX: 700 MM : KW 22.4 HOURS OF OPERATION: 82.312 H WEIGHT: 3,630 KG + 300 KG (ROBOT) FACILITIES LANGUAGE: GERMAN BEDINUNGSEINLEITUNG: YES + ROBOT MULTILIFT H, B.J. 2000, NO. 600006, SELOGICA X/Y/Z P100/.../P600 A/B/C... / 90°/ 90°
Vendedor: TADplast
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 32 mm<br/>throat: 300 mm<br/>bore stroke: 135 mm<br/>spindle taper: mk 3 <br/>column diameter: 123 mm<br/>thread capacity: m 20 <br/>speeds: 100 - 1640 u/min<br/>total power requirement: 01,1/1,84 kw<br/>weight of the machine ca.: 370 kg<br/>dimensions of the machine ca.: 1,03 x 0,665 x 1,9 m<br/>with svivellable rectangle table 600 x 345 mm and worked foodplate. autom. <br/>feeds, stepless turning speed range and cooling equipment against extra charge.<br/>more accessories by request.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 32 MM
THROAT: 300 MM
BORE STROKE: 135 MM
SPINDLE TAPER: MK 3
COLUMN DIAMETER: 123 MM
THREAD CAPACITY: M 20
SPEEDS: 100 - 1640 U/MIN
TOTAL POWER REQUIREMENT: 01,1/1,84 KW
WEIGHT OF THE MACHINE CA.: 370 KG
DIMENSIONS OF THE MACHINE CA.: 1,03 X 0,665 X 1,9 M
WITH SVIVELLABLE RECTANGLE TABLE 600 X 345 MM AND WORKED FOODPLATE. AUTOM.
FEEDS, STEPLESS TURNING SPEED RANGE AND COOLING EQUIPMENT AGAINST EXTRA CHARGE.
MORE ACCESSORIES BY REQUEST.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-working width: approx. 2,600 mm WORKING WIDTH: APPROX. 2,600 MM
Vendedor: Christoph Sattler
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 35,40 mm<br/>throat: 300 mm<br/>bore stroke: 135 mm<br/>spindle taper: mk 4 <br/>column diameter: 123 mm<br/>thread capacity: m 24 <br/>speeds infinitely variable: 100 - 1640 u/min.<br/>table-size: 600 x 345 mm<br/>total power requirement: 1,1/1,84 kw<br/>weight of the machine ca.: 410 kg<br/>dimensions of the machine ca.: 1,03 x 0,665 x 1,9 m<br/>with swivellable rectangle table 600 x 345 mm and worked food plate. stepless <br/>turning speed range and cooling equipment against extra charge.<br/>more accessories by request.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 35,40 MM
THROAT: 300 MM
BORE STROKE: 135 MM
SPINDLE TAPER: MK 4
COLUMN DIAMETER: 123 MM
THREAD CAPACITY: M 24
SPEEDS INFINITELY VARIABLE: 100 - 1640 U/MIN.
TABLE-SIZE: 600 X 345 MM
TOTAL POWER REQUIREMENT: 1,1/1,84 KW
WEIGHT OF THE MACHINE CA.: 410 KG
DIMENSIONS OF THE MACHINE CA.: 1,03 X 0,665 X 1,9 M
WITH SWIVELLABLE RECTANGLE TABLE 600 X 345 MM AND WORKED FOOD PLATE. STEPLESS
TURNING SPEED RANGE AND COOLING EQUIPMENT AGAINST EXTRA CHARGE.
MORE ACCESSORIES BY REQUEST.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-battenfeld 160 ton. injection molding

type tm 1600/750
construction year 2001
dbb 520×520mm.
moving plane stroke 480
min / max mould thickness 225-550
2 jack
n.1 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment BATTENFELD 160 TON. INJECTION MOLDING TYPE TM 1600/750 CONSTRUCTION YEAR 2001 DBB 520×520MM. MOVING PLANE STROKE 480 MIN / MAX MOULD THICKNESS 225-550 2 JACK N.1 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-spindle diameter: 150 mm<br/>x-travel: 10.000 mm<br/>y-travel: 6.000 mm<br/>z-travel: 1.500 mm<br/>w-axis: 700 mm<br/>v-axis: 2.000 mm<br/>control: 840 d sl  siemens<br/>main spindle::  <br/>turning speed range - main spindle: 5 - 3.000 min/-1<br/>transmission ratio: 2 <br/>transmission ratio 1: 5 - 600 min/-1<br/>transmission ratio 2: 601 - 3.000 min/-1<br/>power capacity - main spindel: 61 / 67 kw<br/>max. torque: 2.900 nm<br/>tool taper: sk 50 big+ <br/>spindle stroke: w: 700 mm<br/>feeds::  <br/>rapid traverse: 15 m/min<br/>feed speeds: 1 - 6.000 mm/min<br/>feed power: max. 25 kn<br/>work table::  <br/>surface area: 7.000 x 4.000 x 300 mm<br/>max. table load: 15.000 kg/m²<br/>t-slots: 16x 36h12 x 250mm  din 650<br/>rotating-table::  <br/>surface area: 3.000 x 2.970 mm<br/>type: dv 45 mm<br/>max. table load: 45.000 kg<br/>t-slots: 14x 28h9 x 200  din 650<br/>rotatable: b: 360 °<br/>total power requirement: 120 kva<br/>weight of the machine ca.: - t<br/>dimensions of the machine ca.: 22 x 16 x 10 m<br/>documents:  <br/>coolantsystem:  <br/>high pressure coolant: 20 bar <br/>through spindle coolant:  <br/>paper band filter:  <br/>milling-head: univ. v4 man. <br/>milling-head: vert. kf4/90 man. <br/>milling-head: vert. kf2/90 man. <br/>chip conveyor:  <br/>cnc - boring mill<br/>union chemnitz - pr 150<br/><br/>- ram-spindle<br/>- heavy-duty-machining<br/><br/>milling-heads:<br/>- v4: 2x 360° / 18kw / 3.000 min/1 / 1.405nm / man./man.<br/>- kf4/90: 360° / 30kw / 3.000 min/1 / 1.000nm / auto./man.<br/>- kf2/90: 360° / 15kw / 1.500 min/1 / 1.500nm / man./man.<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 150 MM
X-TRAVEL: 10.000 MM
Y-TRAVEL: 6.000 MM
Z-TRAVEL: 1.500 MM
W-AXIS: 700 MM
V-AXIS: 2.000 MM
CONTROL: 840 D SL SIEMENS
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 5 - 3.000 MIN/-1
TRANSMISSION RATIO: 2
TRANSMISSION RATIO 1: 5 - 600 MIN/-1
TRANSMISSION RATIO 2: 601 - 3.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 61 / 67 KW
MAX. TORQUE: 2.900 NM
TOOL TAPER: SK 50 BIG+
SPINDLE STROKE: W: 700 MM
FEEDS::
RAPID TRAVERSE: 15 M/MIN
FEED SPEEDS: 1 - 6.000 MM/MIN
FEED POWER: MAX. 25 KN
WORK TABLE::
SURFACE AREA: 7.000 X 4.000 X 300 MM
MAX. TABLE LOAD: 15.000 KG/M²
T-SLOTS: 16X 36H12 X 250MM DIN 650
ROTATING-TABLE::
SURFACE AREA: 3.000 X 2.970 MM
TYPE: DV 45 MM
MAX. TABLE LOAD: 45.000 KG
T-SLOTS: 14X 28H9 X 200 DIN 650
ROTATABLE: B: 360 °
TOTAL POWER REQUIREMENT: 120 KVA
WEIGHT OF THE MACHINE CA.: - T
DIMENSIONS OF THE MACHINE CA.: 22 X 16 X 10 M
DOCUMENTS:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 20 BAR
THROUGH SPINDLE COOLANT:
PAPER BAND FILTER:
MILLING-HEAD: UNIV. V4 MAN.
MILLING-HEAD: VERT. KF4/90 MAN.
MILLING-HEAD: VERT. KF2/90 MAN.
CHIP CONVEYOR:
CNC - BORING MILL
UNION CHEMNITZ - PR 150

- RAM-SPINDLE
- HEAVY-DUTY-MACHINING

MILLING-HEADS:
- V4: 2X 360° / 18KW / 3.000 MIN/1 / 1.405NM / MAN./MAN.
- KF4/90: 360° / 30KW / 3.000 MIN/1 / 1.000NM / AUTO./MAN.
- KF2/90: 360° / 15KW / 1.500 MIN/1 / 1.500NM / MAN./MAN.




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-bmb 280 ton. injection molding

type kw 280/1300
construction year 2007
dbb 630×560 mm.
screw diameter 60
moving plane stroke 600
min / max mould thickness 200-650
2 jack
n.4 air spray
accumulators
inverter on pump motor
1 hydraulic radial
1 radial tire
machine certified for good conditions
can be seen running with client’s mould, previous appointment BMB 280 TON. INJECTION MOLDING TYPE KW 280/1300 CONSTRUCTION YEAR 2007 DBB 630×560 MM. SCREW DIAMETER 60 MOVING PLANE STROKE 600 MIN / MAX MOULD THICKNESS 200-650 2 JACK N.4 AIR SPRAY ACCUMULATORS INVERTER ON PUMP MOTOR 1 HYDRAULIC RADIAL 1 RADIAL TIRE MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-table length: 1000 mm<br/>table width: 1200 mm<br/>daylight: 600 mm<br/><br/><br/><br/><br/> TABLE LENGTH: 1000 MM
TABLE WIDTH: 1200 MM
DAYLIGHT: 600 MM




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-effort between stands 400 tons
number of positions incl. cutting position - 7
maximum force at each pos. - 150 tons
number of strokes of the slider 8-12
stroke 800 mm.
the dimensions of the holder are 690 x 1150 mm.
hickness of bolster plate: 250 mm
dimension of bolster plate: 4200x1400 mm
the height of the press 7400 mm. (max)
power of the main electric motor 110 kw
power supply 380v
working air pressure 5 kg / cm2
documentation available.
weight 165 tn EFFORT BETWEEN STANDS 400 TONS NUMBER OF POSITIONS INCL. CUTTING POSITION - 7 MAXIMUM FORCE AT EACH POS. - 150 TONS NUMBER OF STROKES OF THE SLIDER 8-12 STROKE 800 MM. THE DIMENSIONS OF THE HOLDER ARE 690 X 1150 MM. HICKNESS OF BOLSTER PLATE: 250 MM DIMENSION OF BOLSTER PLATE: 4200X1400 MM THE HEIGHT OF THE PRESS 7400 MM. (MAX) POWER OF THE MAIN ELECTRIC MOTOR 110 KW POWER SUPPLY 380V WORKING AIR PRESSURE 5 KG / CM2 DOCUMENTATION AVAILABLE. WEIGHT 165 TN
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-turning diameter: 320 mm<br/>turning length: 600 mm<br/>control: sinumerik 840d <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control sinumerik 840d<br/>c-axis<br/>driven tools<br/>12-fold revolver<br/>3-jaw chuck <br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>drehlänge / turning length    600    mm<br/>max. drehdurchmesser / max. turning diameter    320    mm<br/>umlauf-Ø über bett / rotary Ø over bed    505    mm<br/>umlauf-Ø über schlitten / rotary Ø over sledge    365    mm<br/>längsweg / longitudinal travel    635    mm<br/>planweg / cross travel    250    mm<br/>drehzahlbereich / spindle speed range    25-5000    upm /rpm<br/>anzahl revolverwerkzeugplätze / number of places in revolver    12    fach /fold<br/>eilgang z, x / rapid feed z, x    30/24    m/min<br/>antriebsleistung spindel / drive capacity spindle     21    kw<br/>gewicht der maschine ca. / weight ca.    5500    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 320 MM
TURNING LENGTH: 600 MM
CONTROL: SINUMERIK 840D
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL SINUMERIK 840D
C-AXIS
DRIVEN TOOLS
12-FOLD REVOLVER
3-JAW CHUCK
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
DREHLäNGE / TURNING LENGTH 600 MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 320 MM
UMLAUF-Ø üBER BETT / ROTARY Ø OVER BED 505 MM
UMLAUF-Ø üBER SCHLITTEN / ROTARY Ø OVER SLEDGE 365 MM
LäNGSWEG / LONGITUDINAL TRAVEL 635 MM
PLANWEG / CROSS TRAVEL 250 MM
DREHZAHLBEREICH / SPINDLE SPEED RANGE 25-5000 UPM /RPM
ANZAHL REVOLVERWERKZEUGPLäTZE / NUMBER OF PLACES IN REVOLVER 12 FACH /FOLD
EILGANG Z, X / RAPID FEED Z, X 30/24 M/MIN
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 21 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 5500 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-real press 600 ton. injection molding

type mp 600
construction year 2000
dbb 900×900 mm.
screw diameter 95 mm.
calculated injection volume 2764
moving plane stroke 850
min / max mould thickness 300-1100
3 jack
n.2 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment REAL PRESS 600 TON. INJECTION MOLDING TYPE MP 600 CONSTRUCTION YEAR 2000 DBB 900×900 MM. SCREW DIAMETER 95 MM. CALCULATED INJECTION VOLUME 2764 MOVING PLANE STROKE 850 MIN / MAX MOULD THICKNESS 300-1100 3 JACK N.2 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 50/40 mm<br/>dimensions (l/w/h): 3500x2400x2400 mm<br/>weight: 3750 kg<br/>! machine on order for sale!<br/><br/>! can still be visited in action!<br/><br/>gubisch - centromat cw 1<br/><br/>for window and door production with 50 mm d spindles in longitudinal profiling.<br/><br/>with the following processing stations and possibilities:<br/><br/>1.0 automatically cutting the cross-cut saw from above<br/><br/>- engine power, including engine brake 3.0 kw<br/>- spindle speed 2800 rpm.<br/>- circle diameter 350 mm<br/>- spindle diameter 30 mm d<br/>- clamping flange, 1 driver 6 mm d<br/>  tc 42 mm 120 mm dia.<br/>- vertical stroke pneumatic 100 mm<br/>- horizontal stroke pneumatic 160 mm<br/>  against 2 manual 6-fold revolver stops<br/>- shaving dust hood with extraction nozzle 105 mm d<br/><br/>2.0 slot unit<br/><br/>- engine power, including engine brake 9.2 kw<br/>- spindle speed 3800 rpm.<br/>- circle diameter 320 mm max.<br/>- spindle diameter 50 mm<br/>- spindle usage length 300 mm<br/>- vertical stroke pneumatically fixed 2 x 100 mm<br/>- suitable for 3 tool sets a 100 mm<br/>- zero height 10 mm<br/>- shaving dust hood with extraction nozzle-d 160 mm<br/><br/>3.0 slot table<br/><br/>- table height above ground 920 mm<br/>- feed for 4 speeds freely adjustable:<br/>1st milling, oblique window u. tippgeschw. 7 m / min.<br/>in the tableau.<br/>2. sawing speed 7 m / min.<br/>   3. transfer speed 10 m / min. = on the device.<br/>- 4. return speed / without machining. 25 m / min.<br/>- engine power including engine brake 0.37 kw<br/>- 1 clamping cylinder with 2 additional. pressure shoes<br/>- workpiece clamping pneumatic<br/><br/>3.1 counter timber<br/>- counter holchanger with 2 positions, automatically changeable as well<br/>  manual rotation of 180 °<br/><br/>3.2 length stop<br/>- stop system with 3 scales for<br/>a) frame outside<br/>b) wing upright upright<br/>c) wings outside across<br/>- manual adjustment<br/>- length 2300 mm<br/>- swiveling for diagonal windows +/- 60 degrees<br/><br/>3.3 angle transfer<br/>       automatically via vertically indexed feed roller in the milling feed<br/><br/>4.0 milling machine<br/>       for longitudinal profiling and overturning of windows / doors with the <br/>following<br/>aggregates:<br/><br/>4.1 synchronized milling unit with automatic dipping<br/>- synchronism<br/>- automatic dipping can be used for refolding<br/>- engine power including engine brake 7.5 kw<br/>- spindle speed 6000 rpm.<br/>- circle diameter 240 mm max.<br/>- side stops adjustable for zero-d 140 mm max.<br/>  tools 112 mm min.<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle useful length 100 mm<br/>- horizontal stroke pneumatic 80 mm<br/>- shaving dust hood with extraction nozzle d 120 mm<br/><br/>4.2 profile milling unit<br/><br/>- reverse<br/>- engine power including engine brake 9.2 kw<br/>- spindle speed 6000 rpm.<br/>- circle diameter 240 mm max.<br/>- side stops adjustable for zero-d 140 mm max.<br/>  tools 112 mm min.<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle usage length 300 mm<br/>- vertical stroke pneumatically fixed 1 x 100 mm<br/>  suitable for 3 tool sets a 100 mm 2 x 100 mm<br/>- shaving dust hood with extraction nozzle-d 140 mm<br/><br/>4.3 fitting device<br/><br/>- reverse<br/>- engine power including engine brake 4.0 kw<br/>- spindle speed 6,000 rpm.<br/>- circle diameter 200 mm fix<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle useful length 100 mm<br/>- horizontal stroke 80 mm<br/>- chip extraction with extraction nozzle-d 120 mm<br/><br/>4.4 glass bead sawing unit<br/>- reverse<br/>- engine power including engine brake 3.0 kw<br/>- spindle speed 3,000 rpm.<br/>- spindle diameter 30 mm<br/>- spindle useful length 15 mm<br/>- circle diameter 200 mm<br/>- clamping flange, 1 driver 6 mm d<br/>  tc 42 mm 85 mm d<br/>- vertical stroke pneumatic 100 mm<br/>- glazing bead removal<br/>  incl. anti-kickback device on the unit<br/>- shaving dust hood with extraction nozzle-d 80 mm<br/>- including electr. control<br/><br/>4.5 feed<br/>- motor power 0.75 kw<br/>- feed rate 6 m / min.<br/>- roller distance<br/>  in the area of ??processing units 110 mm<br/>  in the area of ??the feeder 200 mm<br/>- feed rollers individually adjustable diagonally to the stop<br/><br/>4.6 vertical right stops<br/>- stop 1 + 2 for 1 mm chip removal<br/>  adjusted<br/>- adjustable for zero diameter 112 - 140 mm<br/><br/>5.0 workpiece return device<br/>- the finished workpieces come over a sloping roller conveyor<br/> back to the operator.<br/><br/>6.0 central control<br/><br/>clear central control panel with standard control and semi-automatic<br/>in the slot or profile milling unit<br/>(3 programs for frame production iv)<br/>- single and combined operation with automatic angle transfer function<br/>- with umfälzbetriebsschaltung including 4-step control<br/>- simplest, easy to understand, logically structured handling of the controller<br/><br/>8.0 technical connection data<br/>- compressed air connection 3/8 8 bar<br/>- compressed air consumption approx<br/>- extraction air volume 135 m3 / min.<br/>- operating voltage 380 volts, 50 hz.<br/>- connected total 36.0 kw<br/>- extraction air velocity 32 m / sec.<br/>- electrical equipment according to vde 0113 / ip 54<br/>- loading weight approx. 3750 kg<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 50/40 MM
DIMENSIONS (L/W/H): 3500X2400X2400 MM
WEIGHT: 3750 KG
! MACHINE ON ORDER FOR SALE!

! CAN STILL BE VISITED IN ACTION!

GUBISCH - CENTROMAT CW 1

FOR WINDOW AND DOOR PRODUCTION WITH 50 MM D SPINDLES IN LONGITUDINAL PROFILING.

WITH THE FOLLOWING PROCESSING STATIONS AND POSSIBILITIES:

1.0 AUTOMATICALLY CUTTING THE CROSS-CUT SAW FROM ABOVE

- ENGINE POWER, INCLUDING ENGINE BRAKE 3.0 KW
- SPINDLE SPEED 2800 RPM.
- CIRCLE DIAMETER 350 MM
- SPINDLE DIAMETER 30 MM D
- CLAMPING FLANGE, 1 DRIVER 6 MM D
TC 42 MM 120 MM DIA.
- VERTICAL STROKE PNEUMATIC 100 MM
- HORIZONTAL STROKE PNEUMATIC 160 MM
AGAINST 2 MANUAL 6-FOLD REVOLVER STOPS
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE 105 MM D

2.0 SLOT UNIT

- ENGINE POWER, INCLUDING ENGINE BRAKE 9.2 KW
- SPINDLE SPEED 3800 RPM.
- CIRCLE DIAMETER 320 MM MAX.
- SPINDLE DIAMETER 50 MM
- SPINDLE USAGE LENGTH 300 MM
- VERTICAL STROKE PNEUMATICALLY FIXED 2 X 100 MM
- SUITABLE FOR 3 TOOL SETS A 100 MM
- ZERO HEIGHT 10 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 160 MM

3.0 SLOT TABLE

- TABLE HEIGHT ABOVE GROUND 920 MM
- FEED FOR 4 SPEEDS FREELY ADJUSTABLE:
1ST MILLING, OBLIQUE WINDOW U. TIPPGESCHW. 7 M / MIN.
IN THE TABLEAU.
2. SAWING SPEED 7 M / MIN.
3. TRANSFER SPEED 10 M / MIN. = ON THE DEVICE.
- 4. RETURN SPEED / WITHOUT MACHINING. 25 M / MIN.
- ENGINE POWER INCLUDING ENGINE BRAKE 0.37 KW
- 1 CLAMPING CYLINDER WITH 2 ADDITIONAL. PRESSURE SHOES
- WORKPIECE CLAMPING PNEUMATIC

3.1 COUNTER TIMBER
- COUNTER HOLCHANGER WITH 2 POSITIONS, AUTOMATICALLY CHANGEABLE AS WELL
MANUAL ROTATION OF 180 °

3.2 LENGTH STOP
- STOP SYSTEM WITH 3 SCALES FOR
A) FRAME OUTSIDE
B) WING UPRIGHT UPRIGHT
C) WINGS OUTSIDE ACROSS
- MANUAL ADJUSTMENT
- LENGTH 2300 MM
- SWIVELING FOR DIAGONAL WINDOWS +/- 60 DEGREES

3.3 ANGLE TRANSFER
AUTOMATICALLY VIA VERTICALLY INDEXED FEED ROLLER IN THE MILLING FEED

4.0 MILLING MACHINE
FOR LONGITUDINAL PROFILING AND OVERTURNING OF WINDOWS / DOORS WITH THE
FOLLOWING
AGGREGATES:

4.1 SYNCHRONIZED MILLING UNIT WITH AUTOMATIC DIPPING
- SYNCHRONISM
- AUTOMATIC DIPPING CAN BE USED FOR REFOLDING
- ENGINE POWER INCLUDING ENGINE BRAKE 7.5 KW
- SPINDLE SPEED 6000 RPM.
- CIRCLE DIAMETER 240 MM MAX.
- SIDE STOPS ADJUSTABLE FOR ZERO-D 140 MM MAX.
TOOLS 112 MM MIN.
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USEFUL LENGTH 100 MM
- HORIZONTAL STROKE PNEUMATIC 80 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE D 120 MM

4.2 PROFILE MILLING UNIT

- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 9.2 KW
- SPINDLE SPEED 6000 RPM.
- CIRCLE DIAMETER 240 MM MAX.
- SIDE STOPS ADJUSTABLE FOR ZERO-D 140 MM MAX.
TOOLS 112 MM MIN.
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USAGE LENGTH 300 MM
- VERTICAL STROKE PNEUMATICALLY FIXED 1 X 100 MM
SUITABLE FOR 3 TOOL SETS A 100 MM 2 X 100 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 140 MM

4.3 FITTING DEVICE

- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 4.0 KW
- SPINDLE SPEED 6,000 RPM.
- CIRCLE DIAMETER 200 MM FIX
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USEFUL LENGTH 100 MM
- HORIZONTAL STROKE 80 MM
- CHIP EXTRACTION WITH EXTRACTION NOZZLE-D 120 MM

4.4 GLASS BEAD SAWING UNIT
- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 3.0 KW
- SPINDLE SPEED 3,000 RPM.
- SPINDLE DIAMETER 30 MM
- SPINDLE USEFUL LENGTH 15 MM
- CIRCLE DIAMETER 200 MM
- CLAMPING FLANGE, 1 DRIVER 6 MM D
TC 42 MM 85 MM D
- VERTICAL STROKE PNEUMATIC 100 MM
- GLAZING BEAD REMOVAL
INCL. ANTI-KICKBACK DEVICE ON THE UNIT
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 80 MM
- INCLUDING ELECTR. CONTROL

4.5 FEED
- MOTOR POWER 0.75 KW
- FEED RATE 6 M / MIN.
- ROLLER DISTANCE
IN THE AREA OF ??PROCESSING UNITS 110 MM
IN THE AREA OF ??THE FEEDER 200 MM
- FEED ROLLERS INDIVIDUALLY ADJUSTABLE DIAGONALLY TO THE STOP

4.6 VERTICAL RIGHT STOPS
- STOP 1 + 2 FOR 1 MM CHIP REMOVAL
ADJUSTED
- ADJUSTABLE FOR ZERO DIAMETER 112 - 140 MM

5.0 WORKPIECE RETURN DEVICE
- THE FINISHED WORKPIECES COME OVER A SLOPING ROLLER CONVEYOR
BACK TO THE OPERATOR.

6.0 CENTRAL CONTROL

CLEAR CENTRAL CONTROL PANEL WITH STANDARD CONTROL AND SEMI-AUTOMATIC
IN THE SLOT OR PROFILE MILLING UNIT
(3 PROGRAMS FOR FRAME PRODUCTION IV)
- SINGLE AND COMBINED OPERATION WITH AUTOMATIC ANGLE TRANSFER FUNCTION
- WITH UMFäLZBETRIEBSSCHALTUNG INCLUDING 4-STEP CONTROL
- SIMPLEST, EASY TO UNDERSTAND, LOGICALLY STRUCTURED HANDLING OF THE CONTROLLER

8.0 TECHNICAL CONNECTION DATA
- COMPRESSED AIR CONNECTION 3/8 8 BAR
- COMPRESSED AIR CONSUMPTION APPROX
- EXTRACTION AIR VOLUME 135 M3 / MIN.
- OPERATING VOLTAGE 380 VOLTS, 50 HZ.
- CONNECTED TOTAL 36.0 KW
- EXTRACTION AIR VELOCITY 32 M / SEC.
- ELECTRICAL EQUIPMENT ACCORDING TO VDE 0113 / IP 54
- LOADING WEIGHT APPROX. 3750 KG

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-bm biraghi injection molding 330 ton.

type sintesi 330/2160
construction year 2002
ddb 660×600
screw diameter 60 mm.
calculated injection volume 1011
min / max mould thickness 220/730
moving plane stroke 640
control elios 3200
machine certified for good conditions
can be seen running with client’s mould, previous appointment BM BIRAGHI INJECTION MOLDING 330 TON. TYPE SINTESI 330/2160 CONSTRUCTION YEAR 2002 DDB 660×600 SCREW DIAMETER 60 MM. CALCULATED INJECTION VOLUME 1011 MIN / MAX MOULD THICKNESS 220/730 MOVING PLANE STROKE 640 CONTROL ELIOS 3200 MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-cutting diameter: 450 mm<br/>saw band length: 4.450 x 24 x 1,1 mm<br/>capacity 90 degrees: flat: 450 x 600 mm<br/>capacity 45 degrees: flat: 450 x 390 mm<br/>capacity 60 degrees: flat: 450 x 260 mm<br/>cutting speed: 30 / 60 m/min<br/>total power requirement: 2,2 kw<br/>range l-w-h: 2,1 x 1,36 x 2,2 mm<br/><br/><br/><br/><br/> CUTTING DIAMETER: 450 MM
SAW BAND LENGTH: 4.450 X 24 X 1,1 MM
CAPACITY 90 DEGREES: FLAT: 450 X 600 MM
CAPACITY 45 DEGREES: FLAT: 450 X 390 MM
CAPACITY 60 DEGREES: FLAT: 450 X 260 MM
CUTTING SPEED: 30 / 60 M/MIN
TOTAL POWER REQUIREMENT: 2,2 KW
RANGE L-W-H: 2,1 X 1,36 X 2,2 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-sliding table saw minimax mod. sc2w with scoring unit

circular blade mm. 250

table stroke mm. 1600

motor volt. 380

year of production 2004

ce



 SLIDING TABLE SAW MINIMAX MOD. SC2W WITH SCORING UNIT CIRCULAR BLADE MM. 250 TABLE STROKE MM. 1600 MOTOR VOLT. 380 YEAR OF PRODUCTION 2004 CE
Vendedor: VERGA ERCOLE di Roberto Verga & C. S.A.S
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 4900 x 800 x 2200 mm<br/>description: belt size 4600 x 600 mm WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 4900 X 800 X 2200 MM
DESCRIPTION: BELT SIZE 4600 X 600 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-
c 105	
krones maxina etikettieranlage 
int. pos. 5.8
until to 12.600 eh/h 
body label for bottles, working with hot glue
manufacturer is: 1994
with 2 vidio yet electronic cabinets
to print informations on the body label of the 
bottles and to print the shelf life on the lid of 
the bottle
space for the labelling  machine:  
l x b: 1,20 x 1,40

it belongs following transport conveyor to 
the labeling machine:
inlet:
after the twist off machine is following:
1 conveyor, installed as a 160° curve 
1 conveyor, installed as a 9=° curve
than a conveyor, to bring the bottles through 
the labelling machine, to bring the label to the bottle
outlet
after the outlet of the labelling machine 
is following:

1 conveyor, installed as a 90° curve and
a conveyor, constructed as a 2 lane chain transport 
conveyor, lenth approx. 12 m

space for the labelling machine with the inlet and outlet 
transport conveyor is: 2,0 m x 5,20 m, if the labelling plant
shall installed as it is in the production place, dairy
obermaßfeld 
 
price up standing place: 		           18.500,00 euro









 C 105 KRONES MAXINA ETIKETTIERANLAGE INT. POS. 5.8 UNTIL TO 12.600 EH/H BODY LABEL FOR BOTTLES, WORKING WITH HOT GLUE MANUFACTURER IS: 1994 WITH 2 VIDIO YET ELECTRONIC CABINETS TO PRINT INFORMATIONS ON THE BODY LABEL OF THE BOTTLES AND TO PRINT THE SHELF LIFE ON THE LID OF THE BOTTLE SPACE FOR THE LABELLING MACHINE: L X B: 1,20 X 1,40 IT BELONGS FOLLOWING TRANSPORT CONVEYOR TO THE LABELING MACHINE: INLET: AFTER THE TWIST OFF MACHINE IS FOLLOWING: 1 CONVEYOR, INSTALLED AS A 160° CURVE 1 CONVEYOR, INSTALLED AS A 9=° CURVE THAN A CONVEYOR, TO BRING THE BOTTLES THROUGH THE LABELLING MACHINE, TO BRING THE LABEL TO THE BOTTLE OUTLET AFTER THE OUTLET OF THE LABELLING MACHINE IS FOLLOWING: 1 CONVEYOR, INSTALLED AS A 90° CURVE AND A CONVEYOR, CONSTRUCTED AS A 2 LANE CHAIN TRANSPORT CONVEYOR, LENTH APPROX. 12 M SPACE FOR THE LABELLING MACHINE WITH THE INLET AND OUTLET TRANSPORT CONVEYOR IS: 2,0 M X 5,20 M, IF THE LABELLING PLANT SHALL INSTALLED AS IT IS IN THE PRODUCTION PLACE, DAIRY OBERMAßFELD PRICE UP STANDING PLACE: 18.500,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 3400 x 950 x 900 mm<br/>description: belt size 3050 x 600 mm, without drive motor WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 3400 X 950 X 900 MM
DESCRIPTION: BELT SIZE 3050 X 600 MM, WITHOUT DRIVE MOTOR
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.600 €
Ubicación: Land-a 3 125
cheese cube production machine

manufacturer isfa. frey maschinenbau gmbh
89542 herbrechtingen
type: 1510
manufacturer year 1990
mach. no. 151001, 67521 0249
220 v, protected with 28 a

in the past the machine was work with semi hard cheese 
and hard cheese.
by hand the cheese pieces was filled from above into 
the small funnel
after this was well done, the small funnel was closed by hand 
after this procedure  a hydraulic cylinder press the cheese 
pieces through a grid
a around running knife cut the cheese after the grid and 
cube the cheese
the cheese cubes fall done in a tube. 

price up standing point:			3.600,00 euro








 A 3 125 CHEESE CUBE PRODUCTION MACHINE MANUFACTURER ISFA. FREY MASCHINENBAU GMBH 89542 HERBRECHTINGEN TYPE: 1510 MANUFACTURER YEAR 1990 MACH. NO. 151001, 67521 0249 220 V, PROTECTED WITH 28 A IN THE PAST THE MACHINE WAS WORK WITH SEMI HARD CHEESE AND HARD CHEESE. BY HAND THE CHEESE PIECES WAS FILLED FROM ABOVE INTO THE SMALL FUNNEL AFTER THIS WAS WELL DONE, THE SMALL FUNNEL WAS CLOSED BY HAND AFTER THIS PROCEDURE A HYDRAULIC CYLINDER PRESS THE CHEESE PIECES THROUGH A GRID A AROUND RUNNING KNIFE CUT THE CHEESE AFTER THE GRID AND CUBE THE CHEESE THE CHEESE CUBES FALL DONE IN A TUBE. PRICE UP STANDING POINT: 3.600,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 1400 mm<br/>description: without operating panel, see photos for details WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 1400 MM
DESCRIPTION: WITHOUT OPERATING PANEL, SEE PHOTOS FOR DETAILS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 228.000 €
Ubicación: Land-

a 1 122  
1 alfa laval aseptische production plant
for high viscous  products 
manufacturered with extruder technique
with 2 equal constructed bag in box filling machines
transposable (see vidio) to barrel filling in 30 min.
for products as there are:
jam, fruit preparations or mash products based  of
fruits as for example bananas, mango or other hard fruits
and potatos, what is making the plant in the moment
manufacturer year is 2004
manufacturer is alfa laval
production place is finnland 
capacity: 1.600 kg product per hour
filling into 10or 20 kg aseptic bag in box an in barrels
with aseptic prepared barrel inlets.

existing about
pos. 1
extruder technique
1 extruder plant with slit sheet constructed as a drum
is horizontal installed with 4 different hole disk tools
length of the extruder 1,20 m, diameter is 35 cm.

prinziple by mash potatos productuon
the product, cut in small cubes, arrive the extruder 
together with water on the back side of the extruder.
the water will be separate through the slit sheet of 
the extruder and the fast cubical potatoes will be pressed 
through the hole disk tool,installed on the head of the 
extruder drum, what is turn around in the separating phase
with high speed.

the product, what is coming out of the extruder machine
is falling in a rectangular constructed balance tank
with a conical constructed bottom.
in the bottom of the tank a transport snoke bring the 
mash potatoes product in the inlet of a big mono pump.
length of the tank: 1,40 m, breadth is 0,75 m
the mono pump press the mash potatoes in 
the inlet of the first contherm machine
manufacturer is nemo, type: nno 45….
machine no. 352-183
pressure until to 20 bar
the nemo mono pump has a steam barriers installation
by the  slip ring sealing.  

pos. 2
1 contherm plant, existing about 7 single contherm machines
from the mono pump the product arrive the first 
2 contherm machines, where the product heat 
up to 135°. int. no.. he 27, he 28




after this 2 conterm machine the hot product 
arrive the 3. machine.int. no he 29

this machine is working a a heat holder.
after this is well done, the next 4 contherm machines 
cool down the product to under 25 °c.
all contherm machine are installed in a row.
int no. he  30,he 31 und he 32

every contherm machine has a steam barriers 
installation inside of  the slip ring sealings. 
the slip ring sealings are in a good condition. 

pos. 3
1 sterile tank
is installed on a frame in a horizontal position
direct neat the conthermplant in a high of nearly 3 m
manufacturer is alfa laval
type alsafe
content 1.500 l
manufacturer year: 2004
from this sterile tank the aseptic product  
will be desists over a sterile valve knot with 
sterile pressed air  into the balance tank of the 
asetpo bag in  box or barrel filling machine.

pos. 4
cip plant 
on the other side of the contherm plant is installed
a small cip plant.
the cip plant with balance tank, pump and a electronic 
cabinet and with an alfa laval own alfast electronic software 
is standing on a stable frame.


pos. 5
2 equal constructed, aseptic working astepo 
bag in box filling machine
space: 2,4 m x 3,50 m (included electronic cabinet)
high: 2,20 m
type: caf
manufacturer year is 2004
manufacturer is astepo, belongs to alfa laval.
bag sizes: until to 20 kg by bag in box filling
220 kg barrel filling can start after a transposition time 
of 30 minutes
with a bag transport system out of the packaging
with automatic working bag sticking system and product filling
wirh a automatc working bag closing system under an aseptic 
atmosphere.
with a automatic working bag transport conveyor outside 
of the filling machine 
with a roller conveyor for the barrel transport into the filling 
station and out of the filling station, moving by hand.



for the transposition time from bag to barrel filling orreversely
need 30 min ro do all. for this work please have a look to 
the attached vidio.


price from site, net: 228.000,00 euro
  A 1 122 1 ALFA LAVAL ASEPTISCHE PRODUCTION PLANT FOR HIGH VISCOUS PRODUCTS MANUFACTURERED WITH EXTRUDER TECHNIQUE WITH 2 EQUAL CONSTRUCTED BAG IN BOX FILLING MACHINES TRANSPOSABLE (SEE VIDIO) TO BARREL FILLING IN 30 MIN. FOR PRODUCTS AS THERE ARE: JAM, FRUIT PREPARATIONS OR MASH PRODUCTS BASED OF FRUITS AS FOR EXAMPLE BANANAS, MANGO OR OTHER HARD FRUITS AND POTATOS, WHAT IS MAKING THE PLANT IN THE MOMENT MANUFACTURER YEAR IS 2004 MANUFACTURER IS ALFA LAVAL PRODUCTION PLACE IS FINNLAND CAPACITY: 1.600 KG PRODUCT PER HOUR FILLING INTO 10OR 20 KG ASEPTIC BAG IN BOX AN IN BARRELS WITH ASEPTIC PREPARED BARREL INLETS. EXISTING ABOUT POS. 1 EXTRUDER TECHNIQUE 1 EXTRUDER PLANT WITH SLIT SHEET CONSTRUCTED AS A DRUM IS HORIZONTAL INSTALLED WITH 4 DIFFERENT HOLE DISK TOOLS LENGTH OF THE EXTRUDER 1,20 M, DIAMETER IS 35 CM. PRINZIPLE BY MASH POTATOS PRODUCTUON THE PRODUCT, CUT IN SMALL CUBES, ARRIVE THE EXTRUDER TOGETHER WITH WATER ON THE BACK SIDE OF THE EXTRUDER. THE WATER WILL BE SEPARATE THROUGH THE SLIT SHEET OF THE EXTRUDER AND THE FAST CUBICAL POTATOES WILL BE PRESSED THROUGH THE HOLE DISK TOOL,INSTALLED ON THE HEAD OF THE EXTRUDER DRUM, WHAT IS TURN AROUND IN THE SEPARATING PHASE WITH HIGH SPEED. THE PRODUCT, WHAT IS COMING OUT OF THE EXTRUDER MACHINE IS FALLING IN A RECTANGULAR CONSTRUCTED BALANCE TANK WITH A CONICAL CONSTRUCTED BOTTOM. IN THE BOTTOM OF THE TANK A TRANSPORT SNOKE BRING THE MASH POTATOES PRODUCT IN THE INLET OF A BIG MONO PUMP. LENGTH OF THE TANK: 1,40 M, BREADTH IS 0,75 M THE MONO PUMP PRESS THE MASH POTATOES IN THE INLET OF THE FIRST CONTHERM MACHINE MANUFACTURER IS NEMO, TYPE: NNO 45…. MACHINE NO. 352-183 PRESSURE UNTIL TO 20 BAR THE NEMO MONO PUMP HAS A STEAM BARRIERS INSTALLATION BY THE SLIP RING SEALING. POS. 2 1 CONTHERM PLANT, EXISTING ABOUT 7 SINGLE CONTHERM MACHINES FROM THE MONO PUMP THE PRODUCT ARRIVE THE FIRST 2 CONTHERM MACHINES, WHERE THE PRODUCT HEAT UP TO 135°. INT. NO.. HE 27, HE 28 AFTER THIS 2 CONTERM MACHINE THE HOT PRODUCT ARRIVE THE 3. MACHINE.INT. NO HE 29 THIS MACHINE IS WORKING A A HEAT HOLDER. AFTER THIS IS WELL DONE, THE NEXT 4 CONTHERM MACHINES COOL DOWN THE PRODUCT TO UNDER 25 °C. ALL CONTHERM MACHINE ARE INSTALLED IN A ROW. INT NO. HE 30,HE 31 UND HE 32 EVERY CONTHERM MACHINE HAS A STEAM BARRIERS INSTALLATION INSIDE OF THE SLIP RING SEALINGS. THE SLIP RING SEALINGS ARE IN A GOOD CONDITION. POS. 3 1 STERILE TANK IS INSTALLED ON A FRAME IN A HORIZONTAL POSITION DIRECT NEAT THE CONTHERMPLANT IN A HIGH OF NEARLY 3 M MANUFACTURER IS ALFA LAVAL TYPE ALSAFE CONTENT 1.500 L MANUFACTURER YEAR: 2004 FROM THIS STERILE TANK THE ASEPTIC PRODUCT WILL BE DESISTS OVER A STERILE VALVE KNOT WITH STERILE PRESSED AIR INTO THE BALANCE TANK OF THE ASETPO BAG IN BOX OR BARREL FILLING MACHINE. POS. 4 CIP PLANT ON THE OTHER SIDE OF THE CONTHERM PLANT IS INSTALLED A SMALL CIP PLANT. THE CIP PLANT WITH BALANCE TANK, PUMP AND A ELECTRONIC CABINET AND WITH AN ALFA LAVAL OWN ALFAST ELECTRONIC SOFTWARE IS STANDING ON A STABLE FRAME. POS. 5 2 EQUAL CONSTRUCTED, ASEPTIC WORKING ASTEPO BAG IN BOX FILLING MACHINE SPACE: 2,4 M X 3,50 M (INCLUDED ELECTRONIC CABINET) HIGH: 2,20 M TYPE: CAF MANUFACTURER YEAR IS 2004 MANUFACTURER IS ASTEPO, BELONGS TO ALFA LAVAL. BAG SIZES: UNTIL TO 20 KG BY BAG IN BOX FILLING 220 KG BARREL FILLING CAN START AFTER A TRANSPOSITION TIME OF 30 MINUTES WITH A BAG TRANSPORT SYSTEM OUT OF THE PACKAGING WITH AUTOMATIC WORKING BAG STICKING SYSTEM AND PRODUCT FILLING WIRH A AUTOMATC WORKING BAG CLOSING SYSTEM UNDER AN ASEPTIC ATMOSPHERE. WITH A AUTOMATIC WORKING BAG TRANSPORT CONVEYOR OUTSIDE OF THE FILLING MACHINE WITH A ROLLER CONVEYOR FOR THE BARREL TRANSPORT INTO THE FILLING STATION AND OUT OF THE FILLING STATION, MOVING BY HAND. FOR THE TRANSPOSITION TIME FROM BAG TO BARREL FILLING ORREVERSELY NEED 30 MIN RO DO ALL. FOR THIS WORK PLEASE HAVE A LOOK TO THE ATTACHED VIDIO. PRICE FROM SITE, NET: 228.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: used machinery auction RESALE 20.000 €
Ubicación: Land-weight approx.: 3700 kg<br/>tube diameter: max 25 mm mm<br/>dimensions (l x w x h) approx.: 3500 x 1500 x 1600 mm<br/>tube length max.: 2000 mm<br/>description: wafios bmz 61 tube bending machine machine is equipped with feeding system wire diameter: -(at <, 600n/mm²) :6,0-13,0 mm -(at <, 800n/mm²) :6,0-10,0 mm -(at <, 1200n/mm²): max 6,0 mm tube diameter: -(at <, 600n/mm²) : max. 25 mm length of bars: 200-2000 mm stroke of bending head  -upwards   max.  25 mm -downwards  max. 120 mm turningangle of bending head: unlimited crossslide of bending head + 200 /-400 mm distance between two bends: >, 1 x d (depending on tool) standard bending radius:  -r = 1,5 x d -r = 2,0 x d operating hours: 5900 h drive control relais of y-axis faulty. (offer can be seen if wanted) WEIGHT APPROX.: 3700 KG
TUBE DIAMETER: MAX 25 MM MM
DIMENSIONS (L X W X H) APPROX.: 3500 X 1500 X 1600 MM
TUBE LENGTH MAX.: 2000 MM
DESCRIPTION: WAFIOS BMZ 61 TUBE BENDING MACHINE MACHINE IS EQUIPPED WITH FEEDING SYSTEM WIRE DIAMETER: -(AT <, 600N/MM²) :6,0-13,0 MM -(AT <, 800N/MM²) :6,0-10,0 MM -(AT <, 1200N/MM²): MAX 6,0 MM TUBE DIAMETER: -(AT <, 600N/MM²) : MAX. 25 MM LENGTH OF BARS: 200-2000 MM STROKE OF BENDING HEAD -UPWARDS MAX. 25 MM -DOWNWARDS MAX. 120 MM TURNINGANGLE OF BENDING HEAD: UNLIMITED CROSSSLIDE OF BENDING HEAD + 200 /-400 MM DISTANCE BETWEEN TWO BENDS: >, 1 X D (DEPENDING ON TOOL) STANDARD BENDING RADIUS: -R = 1,5 X D -R = 2,0 X D OPERATING HOURS: 5900 H DRIVE CONTROL RELAIS OF Y-AXIS FAULTY. (OFFER CAN BE SEEN IF WANTED)
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ARRASATE types: