11 ofertas

Año de construcción: usado
Ubicación: Land-industrial ceramic production line for electronic,semi-conductor,lcd

make:japanese/korean

manufacturing year:2008

 
11.binder dissolving tank

make:doori(korea)

manufacturing year:2007

cap : 50?

12 vibration screen

make:daesubg(korea)

manufacturing year:2007

13, roller crusher

make:doori(korea)

manufacturing year:2007

14.roller mill

15. vibration screen

make:magmax(korea)

manufacturing year:2008

 
16.bead mill

make:daechang(korea)

manufacturing year:2008

17, low temp circulator

make:dongrim(korea)

manufacturing year:2008

size : 500×500×300mm

cap : -20?~100?

 

18.dissolver system & slurry tank

 dissolver system motor : 10hp

19.oscillater mixing system

make:daechang(korea)

manufacturing year:2008

20. oscillater mixing system

make:daechang(korea)

manufacturing year:2008


22,spray dryer

make:okawara(japan)

manufacturing year:2008


23.pray dryer

make:okawara(japan)

manufacturing year:2008

cap : 4kg/hr

inlet temp : 140?

outlet temp : 70?

 

28. vacuum tank

make:daechang(korea)

manufacturing year:2008


29,cold isostatic pressing m/c

make:kobelco(japan)

manufacturing year:2008

30.hydraulic power press

make:sangwon(korea)

manufacturing year:2008

cap : 300ton

 
31.hydraulic power press

make:taejung(korea)

manufacturing year:2008


33.esclating type pressing atmosphere furnace

make:koha(japan)

manufacturing year:2008

 
34. high temperature hydrogen atmosphere furnace

make:koha(japan)

manufacturing year:2008


35,bell type atmosphere furnace

make:koha(japan)

manufacturing year:2008

size : ?900×1300(h)mm

36. rail type atmosphere furnace

make:koha(japan)

manufacturing year:2008

37. rail type atmosphere furnace

make:koha(japan)

manufacturing year:2008

38.rail type atmosphere furnace

make:koha(japan)

manufacturing year:2008

size : 1000×1700×1800(h)mm

efficiency size : 800×1500×1500(h)mm

 temp : 1650?

 dimension : 3500*4000*3000mm

electric supply : 220kva, 400a

 atmosphere gas : atmosphere

product : ai?o?

39 atmosphere de-grease furnace

make:koha(japan)

manufacturing year:2008

product : ai?o?


40. hydrogen furnace

make:sermonik(korea)

manufacturing year:2008

41.vacuum de-grease furnace

make:sermonik(korea)

manufacturing year:2008

42 . pusher kiln electric furnace

make:huaxing(taiwan)

manufacturing year:2008


43. furnace

make:sermonik(korea)

manufacturing year:2008
44 super kantal box furnace

make:daeshin(korea)

manufacturing year:2008

temp : 1,650?

45. box furnace

make:daeshin(korea)

manufacturing year:2008


47.milling m/c

make:hawchun(korea)

manufacturing year:2008


48. 3-dimensions measure

49.  surface area analyze

make:bell  (japan)

year:2008


 

50.scanning electron microscope

jeols(japan, u.k)

year: 2008

 

51. miscroscope

leica

year:2008
52 hand held xrf analyer

make:oxford

year:2008

53. mastersizer

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    

 INDUSTRIAL CERAMIC PRODUCTION LINE FOR ELECTRONIC,SEMI-CONDUCTOR,LCD MAKE:JAPANESE/KOREAN MANUFACTURING YEAR:2008 11.BINDER DISSOLVING TANK MAKE:DOORI(KOREA) MANUFACTURING YEAR:2007 CAP : 50? 12 VIBRATION SCREEN MAKE:DAESUBG(KOREA) MANUFACTURING YEAR:2007 13, ROLLER CRUSHER MAKE:DOORI(KOREA) MANUFACTURING YEAR:2007 14.ROLLER MILL 15. VIBRATION SCREEN MAKE:MAGMAX(KOREA) MANUFACTURING YEAR:2008 16.BEAD MILL MAKE:DAECHANG(KOREA) MANUFACTURING YEAR:2008 17, LOW TEMP CIRCULATOR MAKE:DONGRIM(KOREA) MANUFACTURING YEAR:2008 SIZE : 500×500×300MM CAP : -20?~100? 18.DISSOLVER SYSTEM & SLURRY TANK DISSOLVER SYSTEM MOTOR : 10HP 19.OSCILLATER MIXING SYSTEM MAKE:DAECHANG(KOREA) MANUFACTURING YEAR:2008 20. OSCILLATER MIXING SYSTEM MAKE:DAECHANG(KOREA) MANUFACTURING YEAR:2008 22,SPRAY DRYER MAKE:OKAWARA(JAPAN) MANUFACTURING YEAR:2008 23.PRAY DRYER MAKE:OKAWARA(JAPAN) MANUFACTURING YEAR:2008 CAP : 4KG/HR INLET TEMP : 140? OUTLET TEMP : 70? 28. VACUUM TANK MAKE:DAECHANG(KOREA) MANUFACTURING YEAR:2008 29,COLD ISOSTATIC PRESSING M/C MAKE:KOBELCO(JAPAN) MANUFACTURING YEAR:2008 30.HYDRAULIC POWER PRESS MAKE:SANGWON(KOREA) MANUFACTURING YEAR:2008 CAP : 300TON 31.HYDRAULIC POWER PRESS MAKE:TAEJUNG(KOREA) MANUFACTURING YEAR:2008 33.ESCLATING TYPE PRESSING ATMOSPHERE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 34. HIGH TEMPERATURE HYDROGEN ATMOSPHERE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 35,BELL TYPE ATMOSPHERE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 SIZE : ?900×1300(H)MM 36. RAIL TYPE ATMOSPHERE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 37. RAIL TYPE ATMOSPHERE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 38.RAIL TYPE ATMOSPHERE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 SIZE : 1000×1700×1800(H)MM EFFICIENCY SIZE : 800×1500×1500(H)MM TEMP : 1650? DIMENSION : 3500*4000*3000MM ELECTRIC SUPPLY : 220KVA, 400A ATMOSPHERE GAS : ATMOSPHERE PRODUCT : AI?O? 39 ATMOSPHERE DE-GREASE FURNACE MAKE:KOHA(JAPAN) MANUFACTURING YEAR:2008 PRODUCT : AI?O? 40. HYDROGEN FURNACE MAKE:SERMONIK(KOREA) MANUFACTURING YEAR:2008 41.VACUUM DE-GREASE FURNACE MAKE:SERMONIK(KOREA) MANUFACTURING YEAR:2008 42 . PUSHER KILN ELECTRIC FURNACE MAKE:HUAXING(TAIWAN) MANUFACTURING YEAR:2008 43. FURNACE MAKE:SERMONIK(KOREA) MANUFACTURING YEAR:2008 44 SUPER KANTAL BOX FURNACE MAKE:DAESHIN(KOREA) MANUFACTURING YEAR:2008 TEMP : 1,650? 45. BOX FURNACE MAKE:DAESHIN(KOREA) MANUFACTURING YEAR:2008 47.MILLING M/C MAKE:HAWCHUN(KOREA) MANUFACTURING YEAR:2008 48. 3-DIMENSIONS MEASURE 49. SURFACE AREA ANALYZE MAKE:BELL (JAPAN) YEAR:2008 50.SCANNING ELECTRON MICROSCOPE JEOLS(JAPAN, U.K) YEAR: 2008 51. MISCROSCOPE LEICA YEAR:2008 52 HAND HELD XRF ANALYER MAKE:OXFORD YEAR:2008 53. MASTERSIZER BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-manufacturer: koch, type: dl 80, year: 1982, control: elektrisch, work bays: 1, work piece thickness mm: 40, werkstücklänge mm: 180-2500,  work piece depth mm: 800, work piece thickness mm: 40, feeding speed m/min: 60, mittenunterstützung: yes, lochraster: 32, beleimwerkzeuge: 12, dovel insertion: yes, work piece clamping: pneumatisch, work stations: 1, wight approx. kg: 3000, year :1982 MANUFACTURER: KOCH, TYPE: DL 80, YEAR: 1982, CONTROL: ELEKTRISCH, WORK BAYS: 1, WORK PIECE THICKNESS MM: 40, WERKSTÜCKLÄNGE MM: 180-2500, WORK PIECE DEPTH MM: 800, WORK PIECE THICKNESS MM: 40, FEEDING SPEED M/MIN: 60, MITTENUNTERSTÜTZUNG: YES, LOCHRASTER: 32, BELEIMWERKZEUGE: 12, DOVEL INSERTION: YES, WORK PIECE CLAMPING: PNEUMATISCH, WORK STATIONS: 1, WIGHT APPROX. KG: 3000, YEAR :1982
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-flat steel scissors
-flat steel - 500 x 18 mm
or: 300 x 22 mm
-shear
		-l and t 90 â° 120 x 13 mm
					45 â° 90 x 10 mm
		-steel / square steel 45 / 40 mm
-notchers
		-with square notcher for sheets up to 13 mm
		-klink width / depth 65 / 85 mm - with triangular notcher for sheets up to 13 mm
		-klink depth 70 mm
-hole punch
		-punching power approx.				    	    80 t
		-unloading 510 mm
		-stroke approx.			10-29 mm
		-punches in steel up to 39 mm ã? 16 mm
		-punches in steel up to 30 mm ã? 20 mm
	-stroke rate put at 20 mm. / scissors 30 / 20 1/min
	-drive 400 v / 7.5 kw
	-space b h 900 x 1800 x 1800 mm
	-weight approx.					2600 kg
	-with: e contact stop various punch with matrices 
 TECHNICAL DATA: -FLAT STEEL SCISSORS -FLAT STEEL - 500 X 18 MM OR: 300 X 22 MM -SHEAR -L AND T 90 ° 120 X 13 MM 45 ° 90 X 10 MM -STEEL / SQUARE STEEL 45 / 40 MM -NOTCHERS -WITH SQUARE NOTCHER FOR SHEETS UP TO 13 MM -KLINK WIDTH / DEPTH 65 / 85 MM - WITH TRIANGULAR NOTCHER FOR SHEETS UP TO 13 MM -KLINK DEPTH 70 MM -HOLE PUNCH -PUNCHING POWER APPROX. 80 T -UNLOADING 510 MM -STROKE APPROX. 10-29 MM -PUNCHES IN STEEL UP TO 39 MM � 16 MM -PUNCHES IN STEEL UP TO 30 MM � 20 MM -STROKE RATE PUT AT 20 MM. / SCISSORS 30 / 20 1/MIN -DRIVE 400 V / 7.5 KW -SPACE B H 900 X 1800 X 1800 MM -WEIGHT APPROX. 2600 KG -WITH: E CONTACT STOP VARIOUS PUNCH WITH MATRICES
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-manufacturer: biesse, type: beta, year: 1984, control: elektrisch, work bays: 1, working length max mm: 3200, working lenght min mm: 180, dovel diameter mm: 8, dovel lenght mm: 30, number of doveling tools: 7, lochraster: 32, dovel insertion: yes, work piece clamping: yes, pneumatic clamping: yes, work stations: 1, wight approx. kg: 2500, year :1984 MANUFACTURER: BIESSE, TYPE: BETA, YEAR: 1984, CONTROL: ELEKTRISCH, WORK BAYS: 1, WORKING LENGTH MAX MM: 3200, WORKING LENGHT MIN MM: 180, DOVEL DIAMETER MM: 8, DOVEL LENGHT MM: 30, NUMBER OF DOVELING TOOLS: 7, LOCHRASTER: 32, DOVEL INSERTION: YES, WORK PIECE CLAMPING: YES, PNEUMATIC CLAMPING: YES, WORK STATIONS: 1, WIGHT APPROX. KG: 2500, YEAR :1984
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand continuous copper rod casting line
mfc.:	zamet-budova mascin, hydromar, kobold, lechler, lenze, bauer, sew-eurodrive
built:	2012	type:	continuous horizontal casting process
rod dia.:	20 – 80 mm		rod length:	2.0 – 4.0 m
capacity:	
the line consist of:		induction holding furnace	
crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm 
secondary cooling	stretch device  	saw blade assembly
run-out table  		reception basket
pump station with tanks and heat exchangers and cooling towers for three circuits:
     1. cooling of the furnace generator
     2. cooling of the furnace inductor
     3. cooling of the mold
hydraulic pumping station 	mfc.:	rexton – bosch
line parameter control panel	cases with electronic control system of the line-2 pcs.
station of preparation, drying, pressing the graphite sleeve of the crystallizer.
crucible for the oven - 3 pcs.        	new saws - 5 pcs. 
 QTY. 1 SECOND-HAND CONTINUOUS COPPER ROD CASTING LINE MFC.: ZAMET-BUDOVA MASCIN, HYDROMAR, KOBOLD, LECHLER, LENZE, BAUER, SEW-EURODRIVE BUILT: 2012 TYPE: CONTINUOUS HORIZONTAL CASTING PROCESS ROD DIA.: 20 – 80 MM ROD LENGTH: 2.0 – 4.0 M CAPACITY: THE LINE CONSIST OF: INDUCTION HOLDING FURNACE CRYSTALLIZER WITH RADIATOR - 2 PCS. SINGLE-CAST DIA. 51 – 120 MM & TWIN CASTING 20-50 MM SECONDARY COOLING STRETCH DEVICE SAW BLADE ASSEMBLY RUN-OUT TABLE RECEPTION BASKET PUMP STATION WITH TANKS AND HEAT EXCHANGERS AND COOLING TOWERS FOR THREE CIRCUITS: 1. COOLING OF THE FURNACE GENERATOR 2. COOLING OF THE FURNACE INDUCTOR 3. COOLING OF THE MOLD HYDRAULIC PUMPING STATION MFC.: REXTON – BOSCH LINE PARAMETER CONTROL PANEL CASES WITH ELECTRONIC CONTROL SYSTEM OF THE LINE-2 PCS. STATION OF PREPARATION, DRYING, PRESSING THE GRAPHITE SLEEVE OF THE CRYSTALLIZER. CRUCIBLE FOR THE OVEN - 3 PCS. NEW SAWS - 5 PCS.
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-connected load: 20 kw<br/>screw size: 40 mm<br/>injection shot weight in polystyrene: 205,6 g/ps<br/>closing pressure: 1.700 kn<br/>no. of components:  <br/>***** injection unit elctrical *****:  <br/>for processing thermoplastics:  <br/>screw diameter: 40 mm<br/>max. swept volume: 226 cm³<br/>spec. injection pressure increased: 2.255 bar<br/>srew and barrel l/d: 20 <br/>srew wear resistant: s 8 <br/>barrel in bi-metallic-execution: m 3 <br/>controlled traverse cooling:  <br/>heating capacity: 10,9 kw<br/>without material hopper:  <br/>no. of components:  <br/>***** clamping uni eletrical *****:  <br/>toggle clamping unit:  <br/>clamping force: 1.100 kn<br/>opening stroke: 460 mm<br/>mould height min.: 180 mm<br/>mould height max.: 500 mm<br/>daylight between platens - max.: 960 mm<br/>total daylight max.: 750 x 750 mm<br/>distance between tie-bars h x v: 510 x 510 mm<br/>ejector zentral, hydraulic: 41 kn<br/>ejector stroke: 140 mm<br/>no. of components:  <br/>***** mold cooling *****:  <br/>control: imc 400 <br/>colour screen: 15-full-hd <br/>usb memory for data storage:  <br/>screen text: deutsch / englisch <br/>:  <br/>***** electric *****:  <br/>supply voltage 3x400 v+n+pe / 50 hz:  <br/>heating circuit for mould heating: 8 stück/ pieces<br/>electrical connection 2-pin 230 v / 16 a: 2 stück/ pieces<br/>electrical connection 3-phases / 16 a: 2 stück/ pieces<br/>interface for masterbatch device: 1 stück/ piece<br/>interface ejector safety device: 1 stück/ piece<br/>interface euromap 67 for robot:  <br/>no. of components:  <br/>***** hydraulics *****:  <br/>servo hydraulic energie saving drive:  <br/>hydraulic corepull on moving platen: 2 stück/ piece<br/>0:  <br/>***** mold cooling *****:  <br/>control manifold + ball valve: 2x6-fach stück/ pieces<br/>magnetic air valve 2/2-wege, r 1/4 zoll: 1 stück/ piece<br/>0:  <br/>***** general *****:  <br/>dry cycling (eurormap 6):  s<br/>machine without oil filling:  <br/>machine support pads:  <br/>: mint grün <br/>operating hours: ca. 100 h<br/>total wight: 6.200 kg<br/>max. strip dimensions: 5,4 x 1,5 x 1,7 m<br/>condition      : pilot plant machine:  <br/>techn. data      : according to the data sheet:  <br/>:  <br/> ::  <br/>:  <br/>the woojin te series,  all electric injection moulding machine<br/>- developed at the woojin r & d center in austria<br/>- minimal space requirements<br/>- high energy efficiency through servo electric drive<br/>- fast driving movements<br/>- optimal accessibility<br/>- user-friendly control<br/>- intuitive screen pages<br/>- low machine frame ensures optimal access<br/>  to the tool and nozzle area<br/><br/><br/><br/><br/><br/> CONNECTED LOAD: 20 KW
SCREW SIZE: 40 MM
INJECTION SHOT WEIGHT IN POLYSTYRENE: 205,6 G/PS
CLOSING PRESSURE: 1.700 KN
NO. OF COMPONENTS:
***** INJECTION UNIT ELCTRICAL *****:
FOR PROCESSING THERMOPLASTICS:
SCREW DIAMETER: 40 MM
MAX. SWEPT VOLUME: 226 CM³
SPEC. INJECTION PRESSURE INCREASED: 2.255 BAR
SREW AND BARREL L/D: 20
SREW WEAR RESISTANT: S 8
BARREL IN BI-METALLIC-EXECUTION: M 3
CONTROLLED TRAVERSE COOLING:
HEATING CAPACITY: 10,9 KW
WITHOUT MATERIAL HOPPER:
NO. OF COMPONENTS:
***** CLAMPING UNI ELETRICAL *****:
TOGGLE CLAMPING UNIT:
CLAMPING FORCE: 1.100 KN
OPENING STROKE: 460 MM
MOULD HEIGHT MIN.: 180 MM
MOULD HEIGHT MAX.: 500 MM
DAYLIGHT BETWEEN PLATENS - MAX.: 960 MM
TOTAL DAYLIGHT MAX.: 750 X 750 MM
DISTANCE BETWEEN TIE-BARS H X V: 510 X 510 MM
EJECTOR ZENTRAL, HYDRAULIC: 41 KN
EJECTOR STROKE: 140 MM
NO. OF COMPONENTS:
***** MOLD COOLING *****:
CONTROL: IMC 400
COLOUR SCREEN: 15-FULL-HD
USB MEMORY FOR DATA STORAGE:
SCREEN TEXT: DEUTSCH / ENGLISCH
:
***** ELECTRIC *****:
SUPPLY VOLTAGE 3X400 V+N+PE / 50 HZ:
HEATING CIRCUIT FOR MOULD HEATING: 8 STüCK/ PIECES
ELECTRICAL CONNECTION 2-PIN 230 V / 16 A: 2 STüCK/ PIECES
ELECTRICAL CONNECTION 3-PHASES / 16 A: 2 STüCK/ PIECES
INTERFACE FOR MASTERBATCH DEVICE: 1 STüCK/ PIECE
INTERFACE EJECTOR SAFETY DEVICE: 1 STüCK/ PIECE
INTERFACE EUROMAP 67 FOR ROBOT:
NO. OF COMPONENTS:
***** HYDRAULICS *****:
SERVO HYDRAULIC ENERGIE SAVING DRIVE:
HYDRAULIC COREPULL ON MOVING PLATEN: 2 STüCK/ PIECE
0:
***** MOLD COOLING *****:
CONTROL MANIFOLD + BALL VALVE: 2X6-FACH STüCK/ PIECES
MAGNETIC AIR VALVE 2/2-WEGE, R 1/4 ZOLL: 1 STüCK/ PIECE
0:
***** GENERAL *****:
DRY CYCLING (EURORMAP 6): S
MACHINE WITHOUT OIL FILLING:
MACHINE SUPPORT PADS:
: MINT GRüN
OPERATING HOURS: CA. 100 H
TOTAL WIGHT: 6.200 KG
MAX. STRIP DIMENSIONS: 5,4 X 1,5 X 1,7 M
CONDITION : PILOT PLANT MACHINE:
TECHN. DATA : ACCORDING TO THE DATA SHEET:
:
::
:
THE WOOJIN TE SERIES, ALL ELECTRIC INJECTION MOULDING MACHINE
- DEVELOPED AT THE WOOJIN R & D CENTER IN AUSTRIA
- MINIMAL SPACE REQUIREMENTS
- HIGH ENERGY EFFICIENCY THROUGH SERVO ELECTRIC DRIVE
- FAST DRIVING MOVEMENTS
- OPTIMAL ACCESSIBILITY
- USER-FRIENDLY CONTROL
- INTUITIVE SCREEN PAGES
- LOW MACHINE FRAME ENSURES OPTIMAL ACCESS
  TO THE TOOL AND NOZZLE AREA





Vendedor: NORTEC MASCHINENTECHNIK GMBH
Año de construcción: usado
Ubicación: Land--digital display - three jaw chuck 㸠200 mm
-steel holder with 2 inserts
-live
-chuck tips
height 170 mm
top width 650 mm

turning diameter over bed 350 mm
over the cross slide 196 mm
in the offset 535 mm
wide before the front 165 mm

spindle
spindle bore 42 mm
d1-4 spindle nose "camlock
morse taper socket no. 3 mt

spindle speeds
3 speed ranges 0-3250 rpm

main motor 7,5 kw (10 hp)

bed
slide guide width 318 mm
type the management of v-shaped and flat

cross slide width and length 180-850 mm
stroke 250 mm

upper carriage
width 90 mm
travel 140 mm
tool holder 20 x 20 mm
werkzeugschnellverschluss dickson no. 2

tailstock
diameter of tailstock quill
(nominal) 63 mm
travel 140 mm
morse taper no. 4 m.t.
offset â± 10 mm

lead screw
diameter 32 mm
thread 6 mm pitch or 4 t.p.i.

thread
metric pitch 0.2-14 mm (51)
inch thread t.p.i. 2-56 (56)
module thread pitches 0.2-3.5 (20)
diametral pitch (d.p..) 8-56 (20)

feed
metric (r10 series) 0.036 1.2 mm / rev
inch (r10 series) 0.0014 - 0.048 "/ u
schedule feed = approx. half of the longitudinal values

machine height
floor to spindle center 1050 mm

total length
650 mm machine 1900 mm

overall width 1100 mm

height 1300 mm

coolant pump
type yp - 0150

spindle stock oil pump
type three-phase 27662-131 interlube

weight
650 mm between the top approx. 1350 kg

-DIGITAL DISPLAY - THREE JAW CHUCK &ATILDE;&CEDIL; 200 MM -STEEL HOLDER WITH 2 INSERTS -LIVE -CHUCK TIPS HEIGHT 170 MM TOP WIDTH 650 MM TURNING DIAMETER OVER BED 350 MM OVER THE CROSS SLIDE 196 MM IN THE OFFSET 535 MM WIDE BEFORE THE FRONT 165 MM SPINDLE SPINDLE BORE 42 MM D1-4 SPINDLE NOSE "CAMLOCK MORSE TAPER SOCKET NO. 3 MT SPINDLE SPEEDS 3 SPEED RANGES 0-3250 RPM MAIN MOTOR 7,5 KW (10 HP) BED SLIDE GUIDE WIDTH 318 MM TYPE THE MANAGEMENT OF V-SHAPED AND FLAT CROSS SLIDE WIDTH AND LENGTH 180-850 MM STROKE 250 MM UPPER CARRIAGE WIDTH 90 MM TRAVEL 140 MM TOOL HOLDER 20 X 20 MM WERKZEUGSCHNELLVERSCHLUSS DICKSON NO. 2 TAILSTOCK DIAMETER OF TAILSTOCK QUILL (NOMINAL) 63 MM TRAVEL 140 MM MORSE TAPER NO. 4 M.T. OFFSET &ACIRC;&PLUSMN; 10 MM LEAD SCREW DIAMETER 32 MM THREAD 6 MM PITCH OR 4 T.P.I. THREAD METRIC PITCH 0.2-14 MM (51) INCH THREAD T.P.I. 2-56 (56) MODULE THREAD PITCHES 0.2-3.5 (20) DIAMETRAL PITCH (D.P..) 8-56 (20) FEED METRIC (R10 SERIES) 0.036 1.2 MM / REV INCH (R10 SERIES) 0.0014 - 0.048 "/ U SCHEDULE FEED = APPROX. HALF OF THE LONGITUDINAL VALUES MACHINE HEIGHT FLOOR TO SPINDLE CENTER 1050 MM TOTAL LENGTH 650 MM MACHINE 1900 MM OVERALL WIDTH 1100 MM HEIGHT 1300 MM COOLANT PUMP TYPE YP - 0150 SPINDLE STOCK OIL PUMP TYPE THREE-PHASE 27662-131 INTERLUBE WEIGHT 650 MM BETWEEN THE TOP APPROX. 1350 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-clamping space: 1590x850mm, clamping table ram distance: 320-550mm, number of clamping grooves: 2, t-groove form: din 650, stroke: 10-140mm, ejector stroke: 40mm, stroke speed: 34-120mm, pressing force: 200t, cutting output: 5000mm² at 80/min, length: 1810mm, width: 1800mm, height: 3650mm, weight: 28t, electrics were changed in 2002, main shaft, coupling and brake partially defective, grip feed not inclusive, machine is currently not functional.  CLAMPING SPACE: 1590X850MM, CLAMPING TABLE RAM DISTANCE: 320-550MM, NUMBER OF CLAMPING GROOVES: 2, T-GROOVE FORM: DIN 650, STROKE: 10-140MM, EJECTOR STROKE: 40MM, STROKE SPEED: 34-120MM, PRESSING FORCE: 200T, CUTTING OUTPUT: 5000MM² AT 80/MIN, LENGTH: 1810MM, WIDTH: 1800MM, HEIGHT: 3650MM, WEIGHT: 28T, ELECTRICS WERE CHANGED IN 2002, MAIN SHAFT, COUPLING AND BRAKE PARTIALLY DEFECTIVE, GRIP FEED NOT INCLUSIVE, MACHINE IS CURRENTLY NOT FUNCTIONAL.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-description

standard with 51 mm spindle bore for manipulating large shaft diameter
    ideal for schools, repair companies, and training workshops
    ideally suited for manipulating steel, non-ferrous materials and plastics
    removable bridge for the machining of workpieces with large diameter
    space-saving installation possibility through to the front pull-out chip tray
    the speed and feed rate setting is easy to set up, leichtgã¤ngg and precise switchable
    electro-mechanical brake to reduce the idle times
    modern main spindle bearings with angular contact ball bearings in precision design
    prism bed made of cast iron, induction hardened and precision ground
    single lever clamp for tailstock can be moved to the taper turning
    guaranteed accuracy of spindle nose (â?¤ 0.009 mm)
    main spindle hardened and ground, running in oil bath
    tailstock, headstock and all guides adjustable

scope of delivery:

3-axis digital display i200 with lcd display
    3 - jaw chuck dk11-200 mm / d5
    face plate 200 mm / d5, according to din 55029
    fixed bezel - forward diam. maximum 70 mm
    revolving bezel - forward diam. maximum 50 mm
    coolant system
    initial filling with shell tellus 46
    pull-out chip tray
    face plate 320 mm
    four-way tool post guard at four-way tool post
    slip clutch
    mikrometerlaengsanschlag
    thread watch
    led machine luminaires
    reducing sleeve
    change gears
    2 centres
    foot pedal with brake function after ce motor with magnetic brake according to ce standard base
    control tool

optional accessories:
	

art. no.

4 - jaw chuck dk12-200 mm / d5, according to din 55029
	

21-0834

soft mono block jaws dsj dk11 200
	

21-0854

soft top jaws mother dk11 200
	

21-0878

base jaws dmj dk11 200
	

21-0900

reversible top jaws dtj-dk11-200
	

21-0922

soft mono block jaws dsj-dk12-200
	

21-0867

chuck flange fl 200 mm according to din 55029, d1-5
	

21-4056

revolving lathe type pc, mk 4
	

22-1003

mitlo. kã¶rnersp. type sma, mk 4 incl. 7 missions
	

22-1042

running with centering taper mk 4-125 mm
	

22-1060

mk turret head 4 with 6-station
	

22-1072

inserts for turret mk 4
	

22-1077

collet chuck 5 c, d1-5
	

22-1093

clamping pliers set 5 c, 3-26 mm, 24 pcs.
	

22-1097

quick change toolpost system multifunction fixed, size s
	

23-1001

factory assembly quick-change holder *.
	

23-1092

holder with straight insert for size s, 25 x 100 mm 23-1006e2

keyless drill chuck 1-16 mm / b-16
	

24-1082

turning tool set with hm inserts, 16 mm, 7 pcs.
	

44-3086

bevel wheel
	

03-1809

maschinenschuh ms 80
	

53-2000

universal coolant concentrate rk 12, 5 l canisters
	

54-1206

technical specifications

centre distance
	

1000 mm

tip height
	

180 mm

swing over bed
	

360 mm

swing over offset *.
	

480 mm

swing over cross slide
	

220 mm

bed width
	

185 mm

spindle bore
	

51 mm

spindle retainer
	

din 55029, d1-5

speed range
	

(8) 70-2000 rpm

range of longitudinal feeds
	

(32) 0,052-1,392 mm / rev

area plan feeds
	

(32) 0.014 - 0.380 mm / rev

metric threads
	

(26) 0.4-7.0 mm

inch thread
	

(34) 4-56 gg/1 "

quill diameter
	

42 mm

quill way
	

110 mm

quill recording
	

mk 4

s1 motor power output 100%
	

1.5 kw (400 v)

motor power s6 40%
	

2.2 kw (400 v)

machine dimensions (w x d x h)
	

1920 x 750 x 1600 mm

weight approx.
	

540 kg DESCRIPTION STANDARD WITH 51 MM SPINDLE BORE FOR MANIPULATING LARGE SHAFT DIAMETER IDEAL FOR SCHOOLS, REPAIR COMPANIES, AND TRAINING WORKSHOPS IDEALLY SUITED FOR MANIPULATING STEEL, NON-FERROUS MATERIALS AND PLASTICS REMOVABLE BRIDGE FOR THE MACHINING OF WORKPIECES WITH LARGE DIAMETER SPACE-SAVING INSTALLATION POSSIBILITY THROUGH TO THE FRONT PULL-OUT CHIP TRAY THE SPEED AND FEED RATE SETTING IS EASY TO SET UP, LEICHTG&ATILDE;&CURREN;NGG AND PRECISE SWITCHABLE ELECTRO-MECHANICAL BRAKE TO REDUCE THE IDLE TIMES MODERN MAIN SPINDLE BEARINGS WITH ANGULAR CONTACT BALL BEARINGS IN PRECISION DESIGN PRISM BED MADE OF CAST IRON, INDUCTION HARDENED AND PRECISION GROUND SINGLE LEVER CLAMP FOR TAILSTOCK CAN BE MOVED TO THE TAPER TURNING GUARANTEED ACCURACY OF SPINDLE NOSE (&ACIRC;?&CURREN; 0.009 MM) MAIN SPINDLE HARDENED AND GROUND, RUNNING IN OIL BATH TAILSTOCK, HEADSTOCK AND ALL GUIDES ADJUSTABLE SCOPE OF DELIVERY: 3-AXIS DIGITAL DISPLAY I200 WITH LCD DISPLAY 3 - JAW CHUCK DK11-200 MM / D5 FACE PLATE 200 MM / D5, ACCORDING TO DIN 55029 FIXED BEZEL - FORWARD DIAM. MAXIMUM 70 MM REVOLVING BEZEL - FORWARD DIAM. MAXIMUM 50 MM COOLANT SYSTEM INITIAL FILLING WITH SHELL TELLUS 46 PULL-OUT CHIP TRAY FACE PLATE 320 MM FOUR-WAY TOOL POST GUARD AT FOUR-WAY TOOL POST SLIP CLUTCH MIKROMETERLAENGSANSCHLAG THREAD WATCH LED MACHINE LUMINAIRES REDUCING SLEEVE CHANGE GEARS 2 CENTRES FOOT PEDAL WITH BRAKE FUNCTION AFTER CE MOTOR WITH MAGNETIC BRAKE ACCORDING TO CE STANDARD BASE CONTROL TOOL OPTIONAL ACCESSORIES: ART. NO. 4 - JAW CHUCK DK12-200 MM / D5, ACCORDING TO DIN 55029 21-0834 SOFT MONO BLOCK JAWS DSJ DK11 200 21-0854 SOFT TOP JAWS MOTHER DK11 200 21-0878 BASE JAWS DMJ DK11 200 21-0900 REVERSIBLE TOP JAWS DTJ-DK11-200 21-0922 SOFT MONO BLOCK JAWS DSJ-DK12-200 21-0867 CHUCK FLANGE FL 200 MM ACCORDING TO DIN 55029, D1-5 21-4056 REVOLVING LATHE TYPE PC, MK 4 22-1003 MITLO. K&ATILDE;&PARA;RNERSP. TYPE SMA, MK 4 INCL. 7 MISSIONS 22-1042 RUNNING WITH CENTERING TAPER MK 4-125 MM 22-1060 MK TURRET HEAD 4 WITH 6-STATION 22-1072 INSERTS FOR TURRET MK 4 22-1077 COLLET CHUCK 5 C, D1-5 22-1093 CLAMPING PLIERS SET 5 C, 3-26 MM, 24 PCS. 22-1097 QUICK CHANGE TOOLPOST SYSTEM MULTIFUNCTION FIXED, SIZE S 23-1001 FACTORY ASSEMBLY QUICK-CHANGE HOLDER *. 23-1092 HOLDER WITH STRAIGHT INSERT FOR SIZE S, 25 X 100 MM 23-1006E2 KEYLESS DRILL CHUCK 1-16 MM / B-16 24-1082 TURNING TOOL SET WITH HM INSERTS, 16 MM, 7 PCS. 44-3086 BEVEL WHEEL 03-1809 MASCHINENSCHUH MS 80 53-2000 UNIVERSAL COOLANT CONCENTRATE RK 12, 5 L CANISTERS 54-1206 TECHNICAL SPECIFICATIONS CENTRE DISTANCE 1000 MM TIP HEIGHT 180 MM SWING OVER BED 360 MM SWING OVER OFFSET *. 480 MM SWING OVER CROSS SLIDE 220 MM BED WIDTH 185 MM SPINDLE BORE 51 MM SPINDLE RETAINER DIN 55029, D1-5 SPEED RANGE (8) 70-2000 RPM RANGE OF LONGITUDINAL FEEDS (32) 0,052-1,392 MM / REV AREA PLAN FEEDS (32) 0.014 - 0.380 MM / REV METRIC THREADS (26) 0.4-7.0 MM INCH THREAD (34) 4-56 GG/1 " QUILL DIAMETER 42 MM QUILL WAY 110 MM QUILL RECORDING MK 4 S1 MOTOR POWER OUTPUT 100% 1.5 KW (400 V) MOTOR POWER S6 40% 2.2 KW (400 V) MACHINE DIMENSIONS (W X D X H) 1920 X 750 X 1600 MM WEIGHT APPROX. 540 KG
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land--digital display - three-jaw chuck
-steel holder with 2 inserts
-live
-chuck tips
height 170 mm
top width 1250 mm

turning diameter over bed 350 mm
over the cross slide 196 mm
in the offset 535 mm
wide before the front 165 mm

spindle
spindle bore 42 mm
d1-4 spindle nose "camlock
morse taper socket no. 3 mt

spindle speeds
3 speed ranges 0-3250 rpm

main motor 7,5 kw (10 hp)

bed
slide guide width 318 mm
type the management of v-shaped and flat

cross slide width and length 180-850 mm
stroke 250 mm

upper carriage
width 90 mm
travel 130 mm
tool holder 20 x 20 mm
werkzeugschnellverschluss dickson no. 2

tailstock
diameter of tailstock quill
(nominal) 63 mm
travel 145 mm
morse taper no. 4 m.t.
offset â±12 mm

lead screw
diameter 32 mm
thread 6 mm pitch or 4 t.p.i.

thread
metric pitch 0.2-14 mm (51)
inch thread t.p.i. 2-56 (56)
module thread pitches 0.2-3.5 (20)
diametral pitch (d.p..) 8-56 (20)

feed
metric (r10 series) 0.018 1.2 mm / rev
inch (r10 series) 0.0007 - 0.048 "/ u
schedule feed = approx. half of the longitudinal values

machine height
floor to spindle center 1070 mm

total length
machine 1250 mm 2500 mm

overall width 1100 mm

height 1300 mm above everything

coolant pump
type 3 mg aq

spindle stock oil pump
type three-phase 27662-131 interlube

weight
1250 mm between the top approx. 1450 kg

-DIGITAL DISPLAY - THREE-JAW CHUCK -STEEL HOLDER WITH 2 INSERTS -LIVE -CHUCK TIPS HEIGHT 170 MM TOP WIDTH 1250 MM TURNING DIAMETER OVER BED 350 MM OVER THE CROSS SLIDE 196 MM IN THE OFFSET 535 MM WIDE BEFORE THE FRONT 165 MM SPINDLE SPINDLE BORE 42 MM D1-4 SPINDLE NOSE "CAMLOCK MORSE TAPER SOCKET NO. 3 MT SPINDLE SPEEDS 3 SPEED RANGES 0-3250 RPM MAIN MOTOR 7,5 KW (10 HP) BED SLIDE GUIDE WIDTH 318 MM TYPE THE MANAGEMENT OF V-SHAPED AND FLAT CROSS SLIDE WIDTH AND LENGTH 180-850 MM STROKE 250 MM UPPER CARRIAGE WIDTH 90 MM TRAVEL 130 MM TOOL HOLDER 20 X 20 MM WERKZEUGSCHNELLVERSCHLUSS DICKSON NO. 2 TAILSTOCK DIAMETER OF TAILSTOCK QUILL (NOMINAL) 63 MM TRAVEL 145 MM MORSE TAPER NO. 4 M.T. OFFSET &ACIRC;&PLUSMN;12 MM LEAD SCREW DIAMETER 32 MM THREAD 6 MM PITCH OR 4 T.P.I. THREAD METRIC PITCH 0.2-14 MM (51) INCH THREAD T.P.I. 2-56 (56) MODULE THREAD PITCHES 0.2-3.5 (20) DIAMETRAL PITCH (D.P..) 8-56 (20) FEED METRIC (R10 SERIES) 0.018 1.2 MM / REV INCH (R10 SERIES) 0.0007 - 0.048 "/ U SCHEDULE FEED = APPROX. HALF OF THE LONGITUDINAL VALUES MACHINE HEIGHT FLOOR TO SPINDLE CENTER 1070 MM TOTAL LENGTH MACHINE 1250 MM 2500 MM OVERALL WIDTH 1100 MM HEIGHT 1300 MM ABOVE EVERYTHING COOLANT PUMP TYPE 3 MG AQ SPINDLE STOCK OIL PUMP TYPE THREE-PHASE 27662-131 INTERLUBE WEIGHT 1250 MM BETWEEN THE TOP APPROX. 1450 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand steel production line
mfc.:	vai, ihi, nikko	built:	1974, 1976, 1995, 2006		
revamped:	2004/2006		stopped:	2009
production of:		square billets:		100x100	160x160	100 x 240 mm
			round billets.		150, 180 & 200 mm
consist of:	electric arc furnace (eaf)	ladle furnace		
vod & vad – degassing     billet caster		ingot caster		
esr – elestro slag remelting 
 QTY. 1 SECOND-HAND STEEL PRODUCTION LINE MFC.: VAI, IHI, NIKKO BUILT: 1974, 1976, 1995, 2006 REVAMPED: 2004/2006 STOPPED: 2009 PRODUCTION OF: SQUARE BILLETS: 100X100 160X160 100 X 240 MM ROUND BILLETS. 150, 180 & 200 MM CONSIST OF: ELECTRIC ARC FURNACE (EAF) LADLE FURNACE VOD & VAD – DEGASSING BILLET CASTER INGOT CASTER ESR – ELESTRO SLAG REMELTING
Vendedor: MET-TECH GMBH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ASTER types: