149 ofertas

Año de construcción: usado
Ubicación: Land-used rotary box press

manufacturer: autefa

type: 293 12

year of construction: 1976

follow technical data USED ROTARY BOX PRESS MANUFACTURER: AUTEFA TYPE: 293 12 YEAR OF CONSTRUCTION: 1976 FOLLOW TECHNICAL DATA
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Precio: 840 €
Ubicación: Land-volume capacity: 1000 m³/h<br/>total power requirement: 745 watt<br/>weight of the machine ca.: 60 kg<br/>dimensions of the machine ca.: 0,75 x 0,9 x 1,4 m<br/>elektric 220 volt:  <br/>mobile welding fume extraction with 2 electrostatic filters and suction arm 2m.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> VOLUME CAPACITY: 1000 M³/H
TOTAL POWER REQUIREMENT: 745 WATT
WEIGHT OF THE MACHINE CA.: 60 KG
DIMENSIONS OF THE MACHINE CA.: 0,75 X 0,9 X 1,4 M
ELEKTRIC 220 VOLT:
MOBILE WELDING FUME EXTRACTION WITH 2 ELECTROSTATIC FILTERS AND SUCTION ARM 2M.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-m. no.: 879662
equipment / additional information:			
flow rate: 80 m3 / h
compression end pressure: 0.6 bar
motor power: 3.0 kw / 1450 / min.

   M. NO.: 879662 EQUIPMENT / ADDITIONAL INFORMATION: FLOW RATE: 80 M3 / H COMPRESSION END PRESSURE: 0.6 BAR MOTOR POWER: 3.0 KW / 1450 / MIN.
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 4000 x 1900 x 1700 mm<br/>description: includes: 4 axis plus universal<br> working witdth: 220 mm, independent motors, 2 feed speeds, electronic digital readout of working height WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 1900 X 1700 MM
DESCRIPTION: INCLUDES: 4 AXIS PLUS UNIVERSAL
WORKING WITDTH: 220 MM, INDEPENDENT MOTORS, 2 FEED SPEEDS, ELECTRONIC DIGITAL READOUT OF WORKING HEIGHT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete installation, unused!, which automatically starts the caterpillar diesel driven compressor when the electrical power is broken down.

the complete installation consists of:

•         1 skid, electric driven, domnick hunter, 110 kw
•         1 skid, caterpillare diesel engine drive, 125 kw
•         1 skid, air treatment oil-water separator, air filters and dryer; buffer vessel: 2,6m³

capacity: 662 nm3/h, pressure: 9 bar max.

•         1x driver diesel engine: caterpillar 3306, 125 kw in soundhood 28 testing hours
•         1x driver emotor: 110kw; domnick hunter 19 testing hours
•         air filter and dryer, 2x buffer vessel, 6m³
•         1x oil / air separator: max. 2880 m³/h
 COMPLETE INSTALLATION, UNUSED!, WHICH AUTOMATICALLY STARTS THE CATERPILLAR DIESEL DRIVEN COMPRESSOR WHEN THE ELECTRICAL POWER IS BROKEN DOWN. THE COMPLETE INSTALLATION CONSISTS OF: • 1 SKID, ELECTRIC DRIVEN, DOMNICK HUNTER, 110 KW • 1 SKID, CATERPILLARE DIESEL ENGINE DRIVE, 125 KW • 1 SKID, AIR TREATMENT OIL-WATER SEPARATOR, AIR FILTERS AND DRYER; BUFFER VESSEL: 2,6M³ CAPACITY: 662 NM3/H, PRESSURE: 9 BAR MAX. • 1X DRIVER DIESEL ENGINE: CATERPILLAR 3306, 125 KW IN SOUNDHOOD 28 TESTING HOURS • 1X DRIVER EMOTOR: 110KW; DOMNICK HUNTER 19 TESTING HOURS • AIR FILTER AND DRYER, 2X BUFFER VESSEL, 6M³ • 1X OIL / AIR SEPARATOR: MAX. 2880 M³/H
Vendedor: Voortman Machines
Año de construcción: usado
Ubicación: Land-with hardened steel cone grinder, plastic housing\r\nspeed​​: 330 rpm, continuously adjustable from coarse to fine\r\ncapacity: flakes 250 g / min., finely grinding about 220 g / min.\r\nall cereals and oilseeds, dry herbs and spices:\r\n WITH HARDENED STEEL CONE GRINDER, PLASTIC HOUSING\R\NSPEED​​: 330 RPM, CONTINUOUSLY ADJUSTABLE FROM COARSE TO FINE\R\NCAPACITY: FLAKES 250 G / MIN., FINELY GRINDING ABOUT 220 G / MIN.\R\NALL CEREALS AND OILSEEDS, DRY HERBS AND SPICES:\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-type: spi 280 eb
- capacity of dough per mixer: 160 kg/batch or 600kg/h
- power: 15,1 kw, 400v / 50 hz / 3 ph
- dimension ( lxwxh ): 2611 x 1190 x 2662 mm
- weight: 1950 kg
- compact machine with integrated bowl lifter
- discharge height: 1900 mm
- 2 mixers available and perfectly suitable for a complete mixing system
e.g. tilting of both mixers into one hopper
- video film bakery: abcs://youtu.be/o18binxu3z0
- the new price now is about 60.000,-€ 
test run with dough berfore delivery possible
- complete set up by request
- 2 machines avaiable TYPE: SPI 280 EB - CAPACITY OF DOUGH PER MIXER: 160 KG/BATCH OR 600KG/H - POWER: 15,1 KW, 400V / 50 HZ / 3 PH - DIMENSION ( LXWXH ): 2611 X 1190 X 2662 MM - WEIGHT: 1950 KG - COMPACT MACHINE WITH INTEGRATED BOWL LIFTER - DISCHARGE HEIGHT: 1900 MM - 2 MIXERS AVAILABLE AND PERFECTLY SUITABLE FOR A COMPLETE MIXING SYSTEM E.G. TILTING OF BOTH MIXERS INTO ONE HOPPER - VIDEO FILM BAKERY: ABCS://YOUTU.BE/O18BINXU3Z0 - THE NEW PRICE NOW IS ABOUT 60.000,-€ TEST RUN WITH DOUGH BERFORE DELIVERY POSSIBLE - COMPLETE SET UP BY REQUEST - 2 MACHINES AVAIABLE
Vendedor: bak-tec-Industries GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.500 €
Ubicación: Land-weight approx.: 2800 kg<br/>dimensions (l x w x h) approx.: 3600 x 1700 x 2500 mm<br/>description: tank size: 1250 x 800 x 500 mm. workpiece dimensions: 960 x 680 x 420 mm. tank capacity: 460 l. travels (x,y,z): 500 x 400 x 400 mm. max workpiece weight: 1500 kg. WEIGHT APPROX.: 2800 KG
DIMENSIONS (L X W X H) APPROX.: 3600 X 1700 X 2500 MM
DESCRIPTION: TANK SIZE: 1250 X 800 X 500 MM. WORKPIECE DIMENSIONS: 960 X 680 X 420 MM. TANK CAPACITY: 460 L. TRAVELS (X,Y,Z): 500 X 400 X 400 MM. MAX WORKPIECE WEIGHT: 1500 KG.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-serck como air condenser bj. 1999/2000 vacuum condensation system:
air condenser chassis with fans
-air extraction 2-speed accessories
-kondensatsammel - and circulation unit is fully assembled on a base frame
-2 safety valves steam side
-contact-controlled control panel with all necessary display and controls for controlling the condensation system
-design: delta design with oppressive fans
-air suction:
the air extraction is carried out with the help of a 2-stage evacuation system (steam jet vacuum pumps) and is arranged inside the boiler house.
-piping: the condenser and condensate units are internally fully piped.
-sound pressure level: 44 db (a) +/-2 db(a) at a distance of 100 m from the plant, when all fans at the design point.
-surface treatment: the steel construction of the capacitor is galvanized and the chambers have a coating of zinc-rich paint or heat-resistant aluminum paint. piping and condensate have a coating of rust protection paint.
design data rohrseitig:
steam: 36000 kg / h
turbine exhaust steam pressure: 0.15 bar abs
turbine exhaust steam enthalpy: 2386 kj/kg loss of pressure in the condenser: 0,7 mbar
pressure loss in piping turbine/condenser (adopted): 10 mbar condensation pressure in the condenser: 0,1393 bar abs.
heat output: 21662 kw
maximum steam temperature: 130 â° c
-design data compresso:
air pressure: 1000,8 mbar
air density: 1.189 kg / m â³
maximum ambient temperature: 20 â° c
motor power of 2 fan: each 70 kw.
 SERCK COMO AIR CONDENSER BJ. 1999/2000 VACUUM CONDENSATION SYSTEM: AIR CONDENSER CHASSIS WITH FANS -AIR EXTRACTION 2-SPEED ACCESSORIES -KONDENSATSAMMEL - AND CIRCULATION UNIT IS FULLY ASSEMBLED ON A BASE FRAME -2 SAFETY VALVES STEAM SIDE -CONTACT-CONTROLLED CONTROL PANEL WITH ALL NECESSARY DISPLAY AND CONTROLS FOR CONTROLLING THE CONDENSATION SYSTEM -DESIGN: DELTA DESIGN WITH OPPRESSIVE FANS -AIR SUCTION: THE AIR EXTRACTION IS CARRIED OUT WITH THE HELP OF A 2-STAGE EVACUATION SYSTEM (STEAM JET VACUUM PUMPS) AND IS ARRANGED INSIDE THE BOILER HOUSE. -PIPING: THE CONDENSER AND CONDENSATE UNITS ARE INTERNALLY FULLY PIPED. -SOUND PRESSURE LEVEL: 44 DB (A) +/-2 DB(A) AT A DISTANCE OF 100 M FROM THE PLANT, WHEN ALL FANS AT THE DESIGN POINT. -SURFACE TREATMENT: THE STEEL CONSTRUCTION OF THE CAPACITOR IS GALVANIZED AND THE CHAMBERS HAVE A COATING OF ZINC-RICH PAINT OR HEAT-RESISTANT ALUMINUM PAINT. PIPING AND CONDENSATE HAVE A COATING OF RUST PROTECTION PAINT. DESIGN DATA ROHRSEITIG: STEAM: 36000 KG / H TURBINE EXHAUST STEAM PRESSURE: 0.15 BAR ABS TURBINE EXHAUST STEAM ENTHALPY: 2386 KJ/KG LOSS OF PRESSURE IN THE CONDENSER: 0,7 MBAR PRESSURE LOSS IN PIPING TURBINE/CONDENSER (ADOPTED): 10 MBAR CONDENSATION PRESSURE IN THE CONDENSER: 0,1393 BAR ABS. HEAT OUTPUT: 21662 KW MAXIMUM STEAM TEMPERATURE: 130 &ACIRC;&DEG; C -DESIGN DATA COMPRESSO: AIR PRESSURE: 1000,8 MBAR AIR DENSITY: 1.189 KG / M &ACIRC;&SUP3; MAXIMUM AMBIENT TEMPERATURE: 20 &ACIRC;&DEG; C MOTOR POWER OF 2 FAN: EACH 70 KW.
Vendedor: Firewood Project SRL
Año de construcción: usado
Ubicación: Land-weight approx.: 662 kg<br/>dimensions (l x w x h) approx.: 900 x 900 x 1500 mm<br/>description: .scm copy router WEIGHT APPROX.: 662 KG
DIMENSIONS (L X W X H) APPROX.: 900 X 900 X 1500 MM
DESCRIPTION: .SCM COPY ROUTER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-this in dry aseptic pet line and it is suitable for low-acid, pulpy and fibrous fruit juices, non-carbonated beverages, ice tea and dairy products. the hygienic level is so high that also milk-based infant formulas are possible. the line was installed in 2013 and is currently in production. it will be available in the summer 2019, and it can be inspected while operating. the delivery includes the product deaeration and pasteurizer, preform feeding and sterilization, aseptic blower-filler-capper block, cip line, cap feeding and sterilization system, bottle and label and inspection systems, shrink packer, handle applicator and conveyors. palletizer is excluded. 
 
the product first goes through gas removal treatment and is then pasteurized in a tubular heat exchanger. the product is cooled down and pumped into an aseptic buffer tank prior to filling. in the over pressurized filling and capping block empty bottles and bottle caps are sterilized with a gaseous h2o2. an h2o2 sensor outside the machine monitors any leaks of the sterilizing agent. also the pressure inside the filling block is monitored, and an automatic shutdown results if the pressure drops. a liquid nitrogen is injected after filling, to remove air from the container and to make the bottle rigid with internal pressure. 
 
both preforms and caps are inspected and faulty pieces are automatically rejected before they are conveyed into the aseptic area. the delivery includes eight (8) sets of different molds for the blow molder which are changed in a special clean room in the blow molder, eliminating the need to enter the aseptic area of the machine. the bottle size change is done very easily in the filler-capper by a mechanical adjustment, and no change parts are needed except the molds in the blow molder. 
 
  
list of main equipment 
•	preform kipper tanner, krones model 827 
•	preform belt transport approx. 50 meters
•	preform inspector preformcheck k-760a09
•	preform sterilizer with h2o2 prejet linear k-436344
•	preform feeding device contifeed rs k-998472
•	processing department krones varioasept j, k-b72058
o	deaeration tank 
o	tubular pasteurizer, suitable for pulp and fiber containing products, pasteurizing temperature 95 – 105 °c, product flow up to 22 m3/h, typical retention time 30 seconds 
o	aseptic product tank
o	aseptic buffer tank for filler
o	pumps, valves, flow meters and other auxiliaries
•	cip station, khs innopro, 2 circuits, approx. 2 x 12 m3 and 1 x 7 m3 tanks 
•	contipure aseptblock dn
o	blow molder krones contiform 16 s/h, serie iii k-552-002 
o	aseptic filler contiform 1.440-44-103, k-102-065 with 44 filling valves
o	capper with closure inspection k960-33-103
o	cap feeding system with sterilizer 
o	chiller mta 
o	8 sets of molds (0.25, 4x0.33, 0.50, 1.0 and 1.5 liters)  
•	filling and cap inspector checkmat 731 k-731u55
•	belt conveyor for full bottles sunco k-995570 and khs 
•	labeling machine contiroll with 16 turtles, hot glue, opp, belt drive, one station with two feeding reels
•	shrink wrap packer khs kisters sp 050 b, year 2004 
•	handle applicator khs innopack csm 050-2-lm, year 2004
•	belt conveyor for packages 
    THIS IN DRY ASEPTIC PET LINE AND IT IS SUITABLE FOR LOW-ACID, PULPY AND FIBROUS FRUIT JUICES, NON-CARBONATED BEVERAGES, ICE TEA AND DAIRY PRODUCTS. THE HYGIENIC LEVEL IS SO HIGH THAT ALSO MILK-BASED INFANT FORMULAS ARE POSSIBLE. THE LINE WAS INSTALLED IN 2013 AND IS CURRENTLY IN PRODUCTION. IT WILL BE AVAILABLE IN THE SUMMER 2019, AND IT CAN BE INSPECTED WHILE OPERATING. THE DELIVERY INCLUDES THE PRODUCT DEAERATION AND PASTEURIZER, PREFORM FEEDING AND STERILIZATION, ASEPTIC BLOWER-FILLER-CAPPER BLOCK, CIP LINE, CAP FEEDING AND STERILIZATION SYSTEM, BOTTLE AND LABEL AND INSPECTION SYSTEMS, SHRINK PACKER, HANDLE APPLICATOR AND CONVEYORS. PALLETIZER IS EXCLUDED. THE PRODUCT FIRST GOES THROUGH GAS REMOVAL TREATMENT AND IS THEN PASTEURIZED IN A TUBULAR HEAT EXCHANGER. THE PRODUCT IS COOLED DOWN AND PUMPED INTO AN ASEPTIC BUFFER TANK PRIOR TO FILLING. IN THE OVER PRESSURIZED FILLING AND CAPPING BLOCK EMPTY BOTTLES AND BOTTLE CAPS ARE STERILIZED WITH A GASEOUS H2O2. AN H2O2 SENSOR OUTSIDE THE MACHINE MONITORS ANY LEAKS OF THE STERILIZING AGENT. ALSO THE PRESSURE INSIDE THE FILLING BLOCK IS MONITORED, AND AN AUTOMATIC SHUTDOWN RESULTS IF THE PRESSURE DROPS. A LIQUID NITROGEN IS INJECTED AFTER FILLING, TO REMOVE AIR FROM THE CONTAINER AND TO MAKE THE BOTTLE RIGID WITH INTERNAL PRESSURE. BOTH PREFORMS AND CAPS ARE INSPECTED AND FAULTY PIECES ARE AUTOMATICALLY REJECTED BEFORE THEY ARE CONVEYED INTO THE ASEPTIC AREA. THE DELIVERY INCLUDES EIGHT (8) SETS OF DIFFERENT MOLDS FOR THE BLOW MOLDER WHICH ARE CHANGED IN A SPECIAL CLEAN ROOM IN THE BLOW MOLDER, ELIMINATING THE NEED TO ENTER THE ASEPTIC AREA OF THE MACHINE. THE BOTTLE SIZE CHANGE IS DONE VERY EASILY IN THE FILLER-CAPPER BY A MECHANICAL ADJUSTMENT, AND NO CHANGE PARTS ARE NEEDED EXCEPT THE MOLDS IN THE BLOW MOLDER. LIST OF MAIN EQUIPMENT • PREFORM KIPPER TANNER, KRONES MODEL 827 • PREFORM BELT TRANSPORT APPROX. 50 METERS • PREFORM INSPECTOR PREFORMCHECK K-760A09 • PREFORM STERILIZER WITH H2O2 PREJET LINEAR K-436344 • PREFORM FEEDING DEVICE CONTIFEED RS K-998472 • PROCESSING DEPARTMENT KRONES VARIOASEPT J, K-B72058 O DEAERATION TANK O TUBULAR PASTEURIZER, SUITABLE FOR PULP AND FIBER CONTAINING PRODUCTS, PASTEURIZING TEMPERATURE 95 – 105 °C, PRODUCT FLOW UP TO 22 M3/H, TYPICAL RETENTION TIME 30 SECONDS O ASEPTIC PRODUCT TANK O ASEPTIC BUFFER TANK FOR FILLER O PUMPS, VALVES, FLOW METERS AND OTHER AUXILIARIES • CIP STATION, KHS INNOPRO, 2 CIRCUITS, APPROX. 2 X 12 M3 AND 1 X 7 M3 TANKS • CONTIPURE ASEPTBLOCK DN O BLOW MOLDER KRONES CONTIFORM 16 S/H, SERIE III K-552-002 O ASEPTIC FILLER CONTIFORM 1.440-44-103, K-102-065 WITH 44 FILLING VALVES O CAPPER WITH CLOSURE INSPECTION K960-33-103 O CAP FEEDING SYSTEM WITH STERILIZER O CHILLER MTA O 8 SETS OF MOLDS (0.25, 4X0.33, 0.50, 1.0 AND 1.5 LITERS) • FILLING AND CAP INSPECTOR CHECKMAT 731 K-731U55 • BELT CONVEYOR FOR FULL BOTTLES SUNCO K-995570 AND KHS • LABELING MACHINE CONTIROLL WITH 16 TURTLES, HOT GLUE, OPP, BELT DRIVE, ONE STATION WITH TWO FEEDING REELS • SHRINK WRAP PACKER KHS KISTERS SP 050 B, YEAR 2004 • HANDLE APPLICATOR KHS INNOPACK CSM 050-2-LM, YEAR 2004 • BELT CONVEYOR FOR PACKAGES
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 24.900 €
Ubicación: Land-; mileage [km]: 222662; power [ps]: 350; gross weight [kg]: 32000; transmission: mechanisch; front tyre size: 12.00r20; rear tyre size: 12.00r20; accessories: differentialsperre; colour: weiß; wheelbase: 3850; suspension type: blatt/blatt; max payload [kg]: 19000; emission class: euro 2 ; MILEAGE [KM]: 222662; POWER [PS]: 350; GROSS WEIGHT [KG]: 32000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 12.00R20; REAR TYRE SIZE: 12.00R20; ACCESSORIES: DIFFERENTIALSPERRE; COLOUR: WEIß; WHEELBASE: 3850; SUSPENSION TYPE: BLATT/BLATT; MAX PAYLOAD [KG]: 19000; EMISSION CLASS: EURO 2
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-4th+5th knife kit for müller martini 890 trimmer
müller martini
model	890
year	1995
part numbers	0890.4350 + dss2609 + (2x) 890.2662 + (2x) 890.2609
knives	included
details	for 2-up productions
available	direct
 4TH+5TH KNIFE KIT FOR MüLLER MARTINI 890 TRIMMER MüLLER MARTINI MODEL 890 YEAR 1995 PART NUMBERS 0890.4350 + DSS2609 + (2X) 890.2662 + (2X) 890.2609 KNIVES INCLUDED DETAILS FOR 2-UP PRODUCTIONS AVAILABLE DIRECT
Vendedor: ITK Graphic Machinery
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; mileage [km]: 387500; power [ps]: 250; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 295 / 80 r 22,5; rear tyre size: 295 / 80 r 22,5; accessories: abs, tempomat; colour: blau; wheelbase: 5100; cargo space dimensions [lxbxh]: 6150x2460x500; max payload [kg]: 6620; emission class: euro 3 ; MILEAGE [KM]: 387500; POWER [PS]: 250; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 295 / 80 R 22,5; REAR TYRE SIZE: 295 / 80 R 22,5; ACCESSORIES: ABS, TEMPOMAT; COLOUR: BLAU; WHEELBASE: 5100; CARGO SPACE DIMENSIONS [LXBXH]: 6150X2460X500; MAX PAYLOAD [KG]: 6620; EMISSION CLASS: EURO 3
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-data:

-type: superinox 2662
-serial number: 1411-11-01
-year of construction: 2011
-glass thickness: 3-60 mm
-min. size: 400 x 100 mm
-number of brushes: 6
-brush diameter: 180 mm
-inlet length: 6400 mm (2 x 2000 mm and 1 x 2400 mm)
-machine: 2600 mm
-spout: 4000 mm (2 x 2000 mm)
-height: 3850 mm
-working height: 770 mm
-direction of rotation: left - right

price on request DATA: -TYPE: SUPERINOX 2662 -SERIAL NUMBER: 1411-11-01 -YEAR OF CONSTRUCTION: 2011 -GLASS THICKNESS: 3-60 MM -MIN. SIZE: 400 X 100 MM -NUMBER OF BRUSHES: 6 -BRUSH DIAMETER: 180 MM -INLET LENGTH: 6400 MM (2 X 2000 MM AND 1 X 2400 MM) -MACHINE: 2600 MM -SPOUT: 4000 MM (2 X 2000 MM) -HEIGHT: 3850 MM -WORKING HEIGHT: 770 MM -DIRECTION OF ROTATION: LEFT - RIGHT PRICE ON REQUEST
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-; mileage [km]: 662887; power [ps]: 441; gross weight [kg]: 18000; transmission: automatisch; front tyre size: 315 / 80 r 22,5; rear tyre size: 315 / 80 r 22,5; accessories: abs, differentialsperre, klimaanlage, tempomat; colour: rot; wheelbase: 3900; max payload [kg]: 10928; emission class: euro 5; cabin: schlafkabine ; MILEAGE [KM]: 662887; POWER [PS]: 441; GROSS WEIGHT [KG]: 18000; TRANSMISSION: AUTOMATISCH; FRONT TYRE SIZE: 315 / 80 R 22,5; REAR TYRE SIZE: 315 / 80 R 22,5; ACCESSORIES: ABS, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT; COLOUR: ROT; WHEELBASE: 3900; MAX PAYLOAD [KG]: 10928; EMISSION CLASS: EURO 5; CABIN: SCHLAFKABINE
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-we have available from germany a virtually new cutting / tearing line for nonwovens made 2016/17 less than 1000 hrs operating
ref. fp452 2 x pierret nh 40 guillotine cutting 1 x conveyor pierret cp40/110
1 x pierret of sonderanlagen cp407270
1 x autefa chute feed manual or via condenser 1 x nonwoven unwinding station
1 x autefa tearing 2 drums 1000 mm w.w..
            1st 45 kw 18,000 pins
            2nd 37kw 26,500 pins (round)
          1 x autefa horizontal baling press
                    bale size osteo...  1100 mm x 765 mm x 765 mm (l x w x h)
                   bale weight approx. 200 depending on material.
                    max pressure 250 kn
          manual strapping 4 x pp tapes line can be feed via the cutter system or directly feeding of fabric rolls. 
 WE HAVE AVAILABLE FROM GERMANY A VIRTUALLY NEW CUTTING / TEARING LINE FOR NONWOVENS MADE 2016/17 LESS THAN 1000 HRS OPERATING REF. FP452 2 X PIERRET NH 40 GUILLOTINE CUTTING 1 X CONVEYOR PIERRET CP40/110 1 X PIERRET OF SONDERANLAGEN CP407270 1 X AUTEFA CHUTE FEED MANUAL OR VIA CONDENSER 1 X NONWOVEN UNWINDING STATION 1 X AUTEFA TEARING 2 DRUMS 1000 MM W.W.. 1ST 45 KW 18,000 PINS 2ND 37KW 26,500 PINS (ROUND) 1 X AUTEFA HORIZONTAL BALING PRESS BALE SIZE OSTEO... 1100 MM X 765 MM X 765 MM (L X W X H) BALE WEIGHT APPROX. 200 DEPENDING ON MATERIAL. MAX PRESSURE 250 KN MANUAL STRAPPING 4 X PP TAPES LINE CAN BE FEED VIA THE CUTTER SYSTEM OR DIRECTLY FEEDING OF FABRIC ROLLS.
Vendedor: NOWOTECMA GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-; gross weight [kg]: 34000; transmission: sonstige; front tyre size: 385 / 65 r 22,5; rear tyre size: 385 / 65 r 22,5; accessories: abs; colour: schwarz; suspension type: luft/luft; cargo space dimensions [lxbxh]: 13400x2460x2590; max payload [kg]: 25640 ; GROSS WEIGHT [KG]: 34000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385 / 65 R 22,5; REAR TYRE SIZE: 385 / 65 R 22,5; ACCESSORIES: ABS; COLOUR: SCHWARZ; SUSPENSION TYPE: LUFT/LUFT; CARGO SPACE DIMENSIONS [LXBXH]: 13400X2460X2590; MAX PAYLOAD [KG]: 25640
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-we have available from germany  a virtually new cutting /tearing line for nonwovens 
made 2016/17 less than 1000 hrs operating
ref. fp452 

2	 x  pierret  nh 40   guillotine cutting 
 1      x pierret conveyor cp40/110
1	x pierret conveyor cp407270
1	x  autefa chute feed manual or via condenser 
1     x nonwoven unwinding station
1     x  autefa tearing  
                     2  drums 1000 mm w.w.
            1st 45 kw  18.000 pins
            2nd 37kw  26.500 pins (round)
          1   x autefa horizontal baling press
                    bale size approx..  1100 mm x 765 mm x 765 mm (l x b x h)
                   bale weight approx. 200 depending on material.
                    max. pressure 250 kn
          manual strapping 4 x pp tapes 

line can be feed via the cutter system 
or directly feeding of  fabric rolls. 
 WE HAVE AVAILABLE FROM GERMANY A VIRTUALLY NEW CUTTING /TEARING LINE FOR NONWOVENS MADE 2016/17 LESS THAN 1000 HRS OPERATING REF. FP452 2 X PIERRET NH 40 GUILLOTINE CUTTING 1 X PIERRET CONVEYOR CP40/110 1 X PIERRET CONVEYOR CP407270 1 X AUTEFA CHUTE FEED MANUAL OR VIA CONDENSER 1 X NONWOVEN UNWINDING STATION 1 X AUTEFA TEARING 2 DRUMS 1000 MM W.W. 1ST 45 KW 18.000 PINS 2ND 37KW 26.500 PINS (ROUND) 1 X AUTEFA HORIZONTAL BALING PRESS BALE SIZE APPROX.. 1100 MM X 765 MM X 765 MM (L X B X H) BALE WEIGHT APPROX. 200 DEPENDING ON MATERIAL. MAX. PRESSURE 250 KN MANUAL STRAPPING 4 X PP TAPES LINE CAN BE FEED VIA THE CUTTER SYSTEM OR DIRECTLY FEEDING OF FABRIC ROLLS. Disponemos de Alemania un corte casi nuevo / línea para no-tejidos de rasgado hecho 2016/17 menos de 1000 horas de funcionamiento Ref FP452 2 x Pierret NH 40 guillotina corte 1 x Pierret transportador CP40/110 1 transportador de x Pierret CP407270 1 x Autefa tolva alimentación manual o a través de condensador 1 x estación desenrollar Nonwoven 1 x Autefa rasgado tambores 2 mm 1000 w.w. 1 pernos de 18.000 KW 45 2 º 37KW 26,500 pines (redondo) prensa de balas horizontal de 1 x Autefa tamaño de la bala aprox.. 1100 mm x 765 mm x 765 mm (L x B x H) Peso aprox. 200 dependiendo del material de la bala. máximo. presión 250 KN manual de fleje 4 x línea de cintas PP se puede alimentar mediante el sistema de corte o rollos de alimentación directamente de la tela.
Vendedor: NOWOTECMA

Deshilachadoras, lobos abridores more

Año de construcción: usado
Precio: 2.900 €
Ubicación: Land-; transmission: sonstige; colour: gelb; cargo space dimensions [lxbxh]: 5000x2350x750 ; TRANSMISSION: SONSTIGE; COLOUR: GELB; CARGO SPACE DIMENSIONS [LXBXH]: 5000X2350X750
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 1.750 €
Ubicación: Land-boge anbaukaltetrockner drs 30 friulair 230v 50/60 hz

anbaugerat for which boge compressors:

c 15 (f) d c 30 (f) d

incl. condensate drain bekomat 32

same as: 7200001662p

(a test of precision whether the dryer for boge their compressor
fits about carried out machine number can. please register with us.)

new with minimal optical defects. BOGE ANBAUKALTETROCKNER DRS 30 FRIULAIR 230V 50/60 HZ ANBAUGERAT FOR WHICH BOGE COMPRESSORS: C 15 (F) D C 30 (F) D INCL. CONDENSATE DRAIN BEKOMAT 32 SAME AS: 7200001662P (A TEST OF PRECISION WHETHER THE DRYER FOR BOGE THEIR COMPRESSOR FITS ABOUT CARRIED OUT MACHINE NUMBER CAN. PLEASE REGISTER WITH US.) NEW WITH MINIMAL OPTICAL DEFECTS.
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 29.900 €
Ubicación: Land-; mileage [km]: 222662; power [ps]: 350; gross weight [kg]: 32000; transmission: mechanisch; front tyre size: 12.00r20; rear tyre size: 12.00r20; accessories: differentialsperre; colour: weiß; wheelbase: 3850; suspension type: blatt/blatt; emission class: euro 2 ; MILEAGE [KM]: 222662; POWER [PS]: 350; GROSS WEIGHT [KG]: 32000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 12.00R20; REAR TYRE SIZE: 12.00R20; ACCESSORIES: DIFFERENTIALSPERRE; COLOUR: WEIß; WHEELBASE: 3850; SUSPENSION TYPE: BLATT/BLATT; EMISSION CLASS: EURO 2
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 10 €
Ubicación: Land-i sell my private stock of rest here at hilti nails and cartridges.
-pack 31. hilti cartridges (cartridges) cal. 6.8/11 m per 100 pcs. (85) â?¬ 7/pack
-10 pack. hilti cartridges (cartridges) dx 600 cal. 6.8/18 per 100 pcs. (86) â?¬ 10 per pack.
-27 piece hilti trapezoidal sheet metal holder mf tsh m8 229006/2 (87) â?¬ 35
-7 pack. hilti nails dn 42 p8 per 100 pcs. (88) â?¬ 10 per pack.
-3 pack. hilti nails dnh 37-p8 s15 per 100 pcs. (89) â?¬ 10 per pack.
-1 pack. hilti nails dn 37-p8 100 pcs. (90) â?¬ 10 per pack.
-3 pack. hilti nails ds 32 p10 per 100 pcs. (91) â?¬ 10 per pack.
-5 pack. hilti nails ds 42 p10 per 100 pcs. (92) â?¬ 10 per pack.
-2 pack. hilti nails dn 52 p8 per 100 pcs. (93) â?¬ 10 per pack.
-2 pack. hilti nails sbn 50/3 per 200 pcs. (94) â?¬ 10 per pack.
-2 pack. hilti nails of eds 19 p10 per 100 pcs. (95) â?¬ 10 per pack.
-1 pack. hilti nails ds 52 p10 100 pcs. (96) â?¬ 10 per pack.
-1 pack. hilti nails m6-11-27 fp8 100 pcs. (97) â?¬ 10 per pack.
-2 pack. hilti nails dn 32 p8 per 100 pcs. (98) â?¬ 10 per pack.
-2 pack hilti nails x-dni 27 p8 per 100 pcs. (99) â?¬ 10 per pack.
important: in the case of acceptance of gesamtpacketes instead of â?¬ 662 only â?¬ 399
contact: 0699 18002203
 
shipping in austria:
for orders up to â?¬ 50 net - â?¬ 18 free shipping
for orders up to â?¬ 100 net - â?¬ 12 shipping
for orders up to â?¬ 200 net - â?¬ 8 free shipping
for orders from â?¬ 200 net - free shipping
contact: mr. engelbert kapadia, 0699 18002203. I SELL MY PRIVATE STOCK OF REST HERE AT HILTI NAILS AND CARTRIDGES. -PACK 31. HILTI CARTRIDGES (CARTRIDGES) CAL. 6.8/11 M PER 100 PCS. (85) &ACIRC;?&NOT; 7/PACK -10 PACK. HILTI CARTRIDGES (CARTRIDGES) DX 600 CAL. 6.8/18 PER 100 PCS. (86) &ACIRC;?&NOT; 10 PER PACK. -27 PIECE HILTI TRAPEZOIDAL SHEET METAL HOLDER MF TSH M8 229006/2 (87) &ACIRC;?&NOT; 35 -7 PACK. HILTI NAILS DN 42 P8 PER 100 PCS. (88) &ACIRC;?&NOT; 10 PER PACK. -3 PACK. HILTI NAILS DNH 37-P8 S15 PER 100 PCS. (89) &ACIRC;?&NOT; 10 PER PACK. -1 PACK. HILTI NAILS DN 37-P8 100 PCS. (90) &ACIRC;?&NOT; 10 PER PACK. -3 PACK. HILTI NAILS DS 32 P10 PER 100 PCS. (91) &ACIRC;?&NOT; 10 PER PACK. -5 PACK. HILTI NAILS DS 42 P10 PER 100 PCS. (92) &ACIRC;?&NOT; 10 PER PACK. -2 PACK. HILTI NAILS DN 52 P8 PER 100 PCS. (93) &ACIRC;?&NOT; 10 PER PACK. -2 PACK. HILTI NAILS SBN 50/3 PER 200 PCS. (94) &ACIRC;?&NOT; 10 PER PACK. -2 PACK. HILTI NAILS OF EDS 19 P10 PER 100 PCS. (95) &ACIRC;?&NOT; 10 PER PACK. -1 PACK. HILTI NAILS DS 52 P10 100 PCS. (96) &ACIRC;?&NOT; 10 PER PACK. -1 PACK. HILTI NAILS M6-11-27 FP8 100 PCS. (97) &ACIRC;?&NOT; 10 PER PACK. -2 PACK. HILTI NAILS DN 32 P8 PER 100 PCS. (98) &ACIRC;?&NOT; 10 PER PACK. -2 PACK HILTI NAILS X-DNI 27 P8 PER 100 PCS. (99) &ACIRC;?&NOT; 10 PER PACK. IMPORTANT: IN THE CASE OF ACCEPTANCE OF GESAMTPACKETES INSTEAD OF &ACIRC;?&NOT; 662 ONLY &ACIRC;?&NOT; 399 CONTACT: 0699 18002203 SHIPPING IN AUSTRIA: FOR ORDERS UP TO &ACIRC;?&NOT; 50 NET - &ACIRC;?&NOT; 18 FREE SHIPPING FOR ORDERS UP TO &ACIRC;?&NOT; 100 NET - &ACIRC;?&NOT; 12 SHIPPING FOR ORDERS UP TO &ACIRC;?&NOT; 200 NET - &ACIRC;?&NOT; 8 FREE SHIPPING FOR ORDERS FROM &ACIRC;?&NOT; 200 NET - FREE SHIPPING CONTACT: MR. ENGELBERT KAPADIA, 0699 18002203.
Vendedor: IPV GmbH
Año de construcción: usado
Precio: 1.700 €
Ubicación: Land-; gross weight [kg]: 2000; transmission: sonstige; front tyre size: 185/60r14; rear tyre size: 185/60r14; colour: braun; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 2980x1470x350; max payload [kg]: 1500 ; GROSS WEIGHT [KG]: 2000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 185/60R14; REAR TYRE SIZE: 185/60R14; COLOUR: BRAUN; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 2980X1470X350; MAX PAYLOAD [KG]: 1500
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-
a galvanised portable sump with grating.
the offer concerns only the movable tray, not the goods, which is on the tub or that which is located in the environment.

manufacturer: brb bearing technology gmbh
load capacity: 500kg
year of construction: 2001
reception capacity: 220 liters

more information: see type plate on image 2

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 
 A GALVANISED PORTABLE SUMP WITH GRATING. THE OFFER CONCERNS ONLY THE MOVABLE TRAY, NOT THE GOODS, WHICH IS ON THE TUB OR THAT WHICH IS LOCATED IN THE ENVIRONMENT. MANUFACTURER: BRB BEARING TECHNOLOGY GMBH LOAD CAPACITY: 500KG YEAR OF CONSTRUCTION: 2001 RECEPTION CAPACITY: 220 LITERS MORE INFORMATION: SEE TYPE PLATE ON IMAGE 2 CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; mileage [km]: 166218; power [ps]: 350; gross weight [kg]: 18000; transmission: mechanisch; front tyre size: 315 / 70 r 22,5; rear tyre size: 315 / 70 r 22,5; accessories: abs, klimaanlage, tempomat, ets - eletronische traktionskontrolle; colour: weiß; wheelbase: 5500; suspension type: luft/luft; max payload [kg]: 10050; emission class: euro 4; cabin: schlafkabine ; MILEAGE [KM]: 166218; POWER [PS]: 350; GROSS WEIGHT [KG]: 18000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 315 / 70 R 22,5; REAR TYRE SIZE: 315 / 70 R 22,5; ACCESSORIES: ABS, KLIMAANLAGE, TEMPOMAT, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: WEIß; WHEELBASE: 5500; SUSPENSION TYPE: LUFT/LUFT; MAX PAYLOAD [KG]: 10050; EMISSION CLASS: EURO 4; CABIN: SCHLAFKABINE
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-cast iron bed 
length 6620 mm
width 2700 mm
thickness 260 mm
t-slots numbers 12 t-slots: 80 x 42 mm
slots spacing 220 mm
weight 19 t

machine in our stock in france. CAST IRON BED LENGTH 6620 MM WIDTH 2700 MM THICKNESS 260 MM T-SLOTS NUMBERS 12 T-SLOTS: 80 X 42 MM SLOTS SPACING 220 MM WEIGHT 19 T MACHINE IN OUR STOCK IN FRANCE.
Vendedor: Retec Machines S.A.S
Año de construcción: usado
Precio: used machinery auction RESALE 2.750 €
Ubicación: Land-a. bertaud 2 heads filling machine, serial: dvj 463, number: 73662, dimensions: 2850 mm x 1300 mm x 2170 mm. A. BERTAUD 2 HEADS FILLING MACHINE, SERIAL: DVJ 463, NUMBER: 73662, DIMENSIONS: 2850 MM X 1300 MM X 2170 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 26.500 €
Ubicación: Land-control: heidenhein tnc 426
spindle cooling
ikz with reprocessing on band filter
table dimensions: 1450 x 610 mm travel: x: 1270 mm y: 600 mm z: 760 mm spindle speed: 0-6000 rpm. 
high speed spindle 30,000 rpm for three-dimensional milling,.
spindle collet cone: sk50 tool changer positions: 2 x 16 motor power: 38 kw machine dimensions: l 3250 with a chip conveyor 4400 mm
t 2300 mm, 3200 mm machine weight: 8000 kg
coolant system
electronic handwheel
chip conveyor
machine runtime 23145 h
on-time 46620 h CONTROL: HEIDENHEIN TNC 426 SPINDLE COOLING IKZ WITH REPROCESSING ON BAND FILTER TABLE DIMENSIONS: 1450 X 610 MM TRAVEL: X: 1270 MM Y: 600 MM Z: 760 MM SPINDLE SPEED: 0-6000 RPM. HIGH SPEED SPINDLE 30,000 RPM FOR THREE-DIMENSIONAL MILLING,. SPINDLE COLLET CONE: SK50 TOOL CHANGER POSITIONS: 2 X 16 MOTOR POWER: 38 KW MACHINE DIMENSIONS: L 3250 WITH A CHIP CONVEYOR 4400 MM T 2300 MM, 3200 MM MACHINE WEIGHT: 8000 KG COOLANT SYSTEM ELECTRONIC HANDWHEEL CHIP CONVEYOR MACHINE RUNTIME 23145 H ON-TIME 46620 H
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cell phone case processing line

(tapping center/engraving machine)

 

 1 tapping center x13sets

make:yujiint(korea)

year:2014

model:ut360d 

table:650×400mm×2set 

table loading weight:250kg 

tarvel(x-y-z):520×360×480mm 

spindle speed:24,000rpm

atc:tool storage 14ea

top cover

air gun

nc controller:mitsubishi m700

 

2 tapping center x20sets

make:yujiint(korea)

year:2014

model:ut360d 

table:650×400mm×2set 

table loading weight:250kg

tarvel(x-y-z):520×360×480mm

spindle speed:15,000rpm

atc:tool storage 14ea

top cover

air gun

nc controller:mitsubishi m700

 

3 tapping center x5sets

 make:doosan(korea)

year:2014

model:dt360d 

table:650×375mm×2set 

table loading weight:200kg 

tarvel(x-y-z):520×360×350mm 

spindle speed:12,000rpm 

atc:tool storage 

air blower 

air gun

 rotary joint

nc controller:

doosan fanuc i series

 

4 tapping center x2sets

make:doosan(korea)

year:2014

table:650×375mm×2set 

table loading weight:200kg 

tarvel(x-y-z):520×360×350mm

spindle speed:24,000rpm

atc:tool storage 14ea

air blower

air gun

rotary joint

nc controller:

doosan fanuc i series

 

5 engraving machine  x10sets

make:gs(korea)

year:2014

 model:g42 

2 spindle type

t-table:400×300mm×2set

tarvel(x-y-z):400×300×150mm

spindle speed:30,000rpm

speed:30,000mm/min

water cooler

nc controller:cs cam

 

6 cnc video measuring system

 make:nikon(japan)

year:2014

 model:i-nexiv-vma-2520

stroke(x-y-z):250×200×200mm

readout:0.1?(max.)

workingpiece weight:15kg(max.)

camera

working distance:73.5mm

host computer

cpu memory:4gb & monitor

 

7 air compressor 

make:yuchang(korea)

year:2014

screw air compressor(comp korea)

pressure:9kg/?

main motor:75kw

 

8 engraving machine x10sets

make:gs(korea)

year:2014 

model:g42 

2 spindle type 

t-table:400×300mm×2set 

tarvel(x-y-z):400×300×150mm

spindle speed:30,000rpm

speed30,000mm/min

water cooler

nc controller:cs cam

 

9 injection moulding m/c

make:woojin(korea)

year:2013

 model:sm-280 

clamping force:280ton 

clamping stroke:280mm 

tia-bar:610×610 

mold thickness:250~650mm 

hopper dryer

hopper loader

q.m.c controller

 

10 robot x5sets

make:yudo(korea) 

year:2013

model:ezi-1000?

 

11 robot

make: yudo(korea)

year:2013

model:ex-800sv 

 

14 hot runner controller x6sets

make:yudo(korea) 

year:2013

model:cw662 

16zone 

 

15 injection moulding m/c 

make:woojin(korea)

year:2013

model:th220m 

 (ih 5.2t) 

clamping force:220ton 

 2157kn

clamping stroke:220mm

tia-bar:560×560

mold thickness:200~600mm

hopper dryer

hopper loader

q.m.c controller

 

20 conveyor belt 

make:yulim(korea)

year:2012

w400×5000lmm w400x5500lmm
 CELL PHONE CASE PROCESSING LINE (TAPPING CENTER/ENGRAVING MACHINE) 1 TAPPING CENTER X13SETS MAKE:YUJIINT(KOREA) YEAR:2014 MODEL:UT360D TABLE:650×400MM×2SET TABLE LOADING WEIGHT:250KG TARVEL(X-Y-Z):520×360×480MM SPINDLE SPEED:24,000RPM ATC:TOOL STORAGE 14EA TOP COVER AIR GUN NC CONTROLLER:MITSUBISHI M700 2 TAPPING CENTER X20SETS MAKE:YUJIINT(KOREA) YEAR:2014 MODEL:UT360D TABLE:650×400MM×2SET TABLE LOADING WEIGHT:250KG TARVEL(X-Y-Z):520×360×480MM SPINDLE SPEED:15,000RPM ATC:TOOL STORAGE 14EA TOP COVER AIR GUN NC CONTROLLER:MITSUBISHI M700 3 TAPPING CENTER X5SETS MAKE:DOOSAN(KOREA) YEAR:2014 MODEL:DT360D TABLE:650×375MM×2SET TABLE LOADING WEIGHT:200KG TARVEL(X-Y-Z):520×360×350MM SPINDLE SPEED:12,000RPM ATC:TOOL STORAGE AIR BLOWER AIR GUN ROTARY JOINT NC CONTROLLER: DOOSAN FANUC I SERIES 4 TAPPING CENTER X2SETS MAKE:DOOSAN(KOREA) YEAR:2014 TABLE:650×375MM×2SET TABLE LOADING WEIGHT:200KG TARVEL(X-Y-Z):520×360×350MM SPINDLE SPEED:24,000RPM ATC:TOOL STORAGE 14EA AIR BLOWER AIR GUN ROTARY JOINT NC CONTROLLER: DOOSAN FANUC I SERIES 5 ENGRAVING MACHINE X10SETS MAKE:GS(KOREA) YEAR:2014 MODEL:G42 2 SPINDLE TYPE T-TABLE:400×300MM×2SET TARVEL(X-Y-Z):400×300×150MM SPINDLE SPEED:30,000RPM SPEED:30,000MM/MIN WATER COOLER NC CONTROLLER:CS CAM 6 CNC VIDEO MEASURING SYSTEM MAKE:NIKON(JAPAN) YEAR:2014 MODEL:I-NEXIV-VMA-2520 STROKE(X-Y-Z):250×200×200MM READOUT:0.1?(MAX.) WORKINGPIECE WEIGHT:15KG(MAX.) CAMERA WORKING DISTANCE:73.5MM HOST COMPUTER CPU MEMORY:4GB & MONITOR 7 AIR COMPRESSOR MAKE:YUCHANG(KOREA) YEAR:2014 SCREW AIR COMPRESSOR(COMP KOREA) PRESSURE:9KG/? MAIN MOTOR:75KW 8 ENGRAVING MACHINE X10SETS MAKE:GS(KOREA) YEAR:2014 MODEL:G42 2 SPINDLE TYPE T-TABLE:400×300MM×2SET TARVEL(X-Y-Z):400×300×150MM SPINDLE SPEED:30,000RPM SPEED30,000MM/MIN WATER COOLER NC CONTROLLER:CS CAM 9 INJECTION MOULDING M/C MAKE:WOOJIN(KOREA) YEAR:2013 MODEL:SM-280 CLAMPING FORCE:280TON CLAMPING STROKE:280MM TIA-BAR:610×610 MOLD THICKNESS:250~650MM HOPPER DRYER HOPPER LOADER Q.M.C CONTROLLER 10 ROBOT X5SETS MAKE:YUDO(KOREA) YEAR:2013 MODEL:EZI-1000? 11 ROBOT MAKE: YUDO(KOREA) YEAR:2013 MODEL:EX-800SV 14 HOT RUNNER CONTROLLER X6SETS MAKE:YUDO(KOREA) YEAR:2013 MODEL:CW662 16ZONE 15 INJECTION MOULDING M/C MAKE:WOOJIN(KOREA) YEAR:2013 MODEL:TH220M (IH 5.2T) CLAMPING FORCE:220TON 2157KN CLAMPING STROKE:220MM TIA-BAR:560×560 MOLD THICKNESS:200~600MM HOPPER DRYER HOPPER LOADER Q.M.C CONTROLLER 20 CONVEYOR BELT MAKE:YULIM(KOREA) YEAR:2012 W400×5000LMM W400X5500LMM
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1000 x 600 x 730 mm<br/>description: serial number 890914hv76621379, maximum working pressure 7 bar, speed 1450 rpm, flow rate 18,5 l/s, motor 7,5 kw, working hours 43138 h, for further information see photos. WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 600 X 730 MM
DESCRIPTION: SERIAL NUMBER 890914HV76621379, MAXIMUM WORKING PRESSURE 7 BAR, SPEED 1450 RPM, FLOW RATE 18,5 L/S, MOTOR 7,5 KW, WORKING HOURS 43138 H, FOR FURTHER INFORMATION SEE PHOTOS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-preliminary information:

stock no. 4662: 

1 used welding cell with robots and welding cabinet
make panasonic, mod. performarc pa ii  PRELIMINARY INFORMATION: STOCK NO. 4662: 1 USED WELDING CELL WITH ROBOTS AND WELDING CABINET MAKE PANASONIC, MOD. PERFORMARC PA II
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Precio: 25.538 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-&gt; krauss maffei km 1600/12000/390 mxw
&gt; robot included krauss maffei
&gt; year 2006

technical specifications:
clamping force: 1600 ton

shot weight (max): 4727 g

distance between tie-bars (h): 1850 mm

distance between tie-bars (v): 1400 mm

platen size (h): 2500 mm

platen size (v): 2100 mm

screw diameter: 105 mm

control type: electronic mc4

mould height (max): 2800 mm

mould height (min): 1800 mm

daylight between platens (max): 4300 mm

opening stroke (max.): 2500 mm

ejector force: 14.20 ton

core pulls: yes

number of core pulls: 6

screw l/d ratio: 23

screw speed: 158 rpm

injection volume: 5193 cc

injection pressure: 2296 bar

injection rate: 1299 cc / s

nozzle force (max): 16.60 ton

nozzle stroke (max): 600 mm

oil tank capacity: 2740 l

orientation: horizontal

other specifications:
closing unit:
magnetic clamping system: tecnomagnete
mould height min 2 * 662 mm
imould height max 2 * 1162 mm
opening strocke max 4192 mm
mold min size min. h "x" v: 1240 * 940 mm
mold max weight: fixed + weight pl. 15000/18000 kg / / turning plate: 2 * 7500 kg
fixing plate h * v turning plate 1820 * 1380 mm
centering flange ds festival + weighted pl 120 mm / / turning plate: 250 mm
centering flange ss fixed + weighted pl 250 mm / / turning plate: 250 mm
thread in fixing plates: m24
core pull automatic programmable

1st injection unit:
screw type: hps-m
rsp type: single ball
hot runner control points: 12 zones
air ejector (ds / as) 1 + 1
pneu. nozzle control: yes, cascade 4 2nd injention unit:
screw: 35 mm
l / d ratio: 20 mm
screw type: standard
rsp type: multi-ball
injection volume: 155 cm3
injection weight: 141 g
nozzle strocke max: 161 mm
injection pressure: 2429 bar
nozzle pressure force 84 kn
injection speed max 135 cm3 / s
hot runner control points: 4 zones
air ejector (ds / as) 1 + 1
pneu. shutter nozzle control: yes, cascade 4 tray

robot included krauss maffei
control system: version 3.2.00
year of construction 2006

machine in stock!
 &GT; KRAUSS MAFFEI KM 1600/12000/390 MXW &GT; ROBOT INCLUDED KRAUSS MAFFEI &GT; YEAR 2006 TECHNICAL SPECIFICATIONS: CLAMPING FORCE: 1600 TON SHOT WEIGHT (MAX): 4727 G DISTANCE BETWEEN TIE-BARS (H): 1850 MM DISTANCE BETWEEN TIE-BARS (V): 1400 MM PLATEN SIZE (H): 2500 MM PLATEN SIZE (V): 2100 MM SCREW DIAMETER: 105 MM CONTROL TYPE: ELECTRONIC MC4 MOULD HEIGHT (MAX): 2800 MM MOULD HEIGHT (MIN): 1800 MM DAYLIGHT BETWEEN PLATENS (MAX): 4300 MM OPENING STROKE (MAX.): 2500 MM EJECTOR FORCE: 14.20 TON CORE PULLS: YES NUMBER OF CORE PULLS: 6 SCREW L/D RATIO: 23 SCREW SPEED: 158 RPM INJECTION VOLUME: 5193 CC INJECTION PRESSURE: 2296 BAR INJECTION RATE: 1299 CC / S NOZZLE FORCE (MAX): 16.60 TON NOZZLE STROKE (MAX): 600 MM OIL TANK CAPACITY: 2740 L ORIENTATION: HORIZONTAL OTHER SPECIFICATIONS: CLOSING UNIT: MAGNETIC CLAMPING SYSTEM: TECNOMAGNETE MOULD HEIGHT MIN 2 * 662 MM IMOULD HEIGHT MAX 2 * 1162 MM OPENING STROCKE MAX 4192 MM MOLD MIN SIZE MIN. H "X" V: 1240 * 940 MM MOLD MAX WEIGHT: FIXED + WEIGHT PL. 15000/18000 KG / / TURNING PLATE: 2 * 7500 KG FIXING PLATE H * V TURNING PLATE 1820 * 1380 MM CENTERING FLANGE DS FESTIVAL + WEIGHTED PL 120 MM / / TURNING PLATE: 250 MM CENTERING FLANGE SS FIXED + WEIGHTED PL 250 MM / / TURNING PLATE: 250 MM THREAD IN FIXING PLATES: M24 CORE PULL AUTOMATIC PROGRAMMABLE 1ST INJECTION UNIT: SCREW TYPE: HPS-M RSP TYPE: SINGLE BALL HOT RUNNER CONTROL POINTS: 12 ZONES AIR EJECTOR (DS / AS) 1 + 1 PNEU. NOZZLE CONTROL: YES, CASCADE 4 2ND INJENTION UNIT: SCREW: 35 MM L / D RATIO: 20 MM SCREW TYPE: STANDARD RSP TYPE: MULTI-BALL INJECTION VOLUME: 155 CM3 INJECTION WEIGHT: 141 G NOZZLE STROCKE MAX: 161 MM INJECTION PRESSURE: 2429 BAR NOZZLE PRESSURE FORCE 84 KN INJECTION SPEED MAX 135 CM3 / S HOT RUNNER CONTROL POINTS: 4 ZONES AIR EJECTOR (DS / AS) 1 + 1 PNEU. SHUTTER NOZZLE CONTROL: YES, CASCADE 4 TRAY ROBOT INCLUDED KRAUSS MAFFEI CONTROL SYSTEM: VERSION 3.2.00 YEAR OF CONSTRUCTION 2006 MACHINE IN STOCK!
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-length: 5500mm, width: 900mm, height: 2360mm, with draining canal, circuit diamgrams available.  LENGTH: 5500MM, WIDTH: 900MM, HEIGHT: 2360MM, WITH DRAINING CANAL, CIRCUIT DIAMGRAMS AVAILABLE.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 14.800 €
Ubicación: Land-: 150 mm<br/>: 135 mm<br/>: 205 x 90 mm<br/>: 130 mm<br/>: 120 mm<br/>: 145 x 90 mm<br/>: 3.500 mm<br/>: 5.863 mm<br/>: 1.662 mm<br/>: 1.158 mm<br/>: 680 kg<br/>double mitre circular saw<br/>2 hand operation<br/>automatic angle preselection 45° / 90° (angles between manually adjustable)<br/>between adjustments manual<br/>lcd touch screen<br/>automatic protection cover<br/>2 integrated air pistols<br/>2 sawing blades<br/>2 horizontal clamping cylinders<br/>2 coolant equiptments for aluminium<br/>2 hydro-check units for continuous cutting pressure<br/>users manual in german<br/><br/><br/><br/><br/>automatic angle preselection: 45° / 90°<br/>accuracy: +/- 0,1 mm<br/>capacity:<br/>round 90°: 150 mm<br/>square 90°: 135 mm<br/>rectangle 90°: 205 x 90 mm<br/>round 45°: 130 mm<br/>square 45°: 120 mm<br/>rectangle 45°: 145 x 90 mm<br/>blade speed: 2.900 r/min<br/>blade dimension: 450 x 32 x 4 (z120)<br/>max. cutt off length: 3.500 mm<br/>motor: 2 x 2,2 kw + 0,55 kw<br/>width: 5.863 mm<br/>depth: 1.662 mm<br/>height: 1.158 mm<br/>weight: 680 kg<br/><br/><br/><br/> : 150 MM
: 135 MM
: 205 X 90 MM
: 130 MM
: 120 MM
: 145 X 90 MM
: 3.500 MM
: 5.863 MM
: 1.662 MM
: 1.158 MM
: 680 KG
DOUBLE MITRE CIRCULAR SAW
2 HAND OPERATION
AUTOMATIC ANGLE PRESELECTION 45° / 90° (ANGLES BETWEEN MANUALLY ADJUSTABLE)
BETWEEN ADJUSTMENTS MANUAL
LCD TOUCH SCREEN
AUTOMATIC PROTECTION COVER
2 INTEGRATED AIR PISTOLS
2 SAWING BLADES
2 HORIZONTAL CLAMPING CYLINDERS
2 COOLANT EQUIPTMENTS FOR ALUMINIUM
2 HYDRO-CHECK UNITS FOR CONTINUOUS CUTTING PRESSURE
USERS MANUAL IN GERMAN




AUTOMATIC ANGLE PRESELECTION: 45° / 90°
ACCURACY: +/- 0,1 MM
CAPACITY:
ROUND 90°: 150 MM
SQUARE 90°: 135 MM
RECTANGLE 90°: 205 X 90 MM
ROUND 45°: 130 MM
SQUARE 45°: 120 MM
RECTANGLE 45°: 145 X 90 MM
BLADE SPEED: 2.900 R/MIN
BLADE DIMENSION: 450 X 32 X 4 (Z120)
MAX. CUTT OFF LENGTH: 3.500 MM
MOTOR: 2 X 2,2 KW + 0,55 KW
WIDTH: 5.863 MM
DEPTH: 1.662 MM
HEIGHT: 1.158 MM
WEIGHT: 680 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-stock no. 12102
manufacturer krauss maffei
machine type km 1600-17200 mx
year 2015
site eschweiler
control type mc 6
teletext in german
hours of operation 9187 h
delivery time immediately
price on request
technical details
clamping unit
clamping force of 16000 kn
tool opening force, max. 	1120 kn
mounting plate (h x v) 2550 x 2100 mm
1850 x 1400 mm clear width (h x v)
tool unclamping stroke 2700 mm
mould installation height min. 	700 mm
mould installation height max. 	1600 mm
opening width 3400 mm
ejector stroke 350 mm
ejector force forward/back 300 kn
injection unit
screw diameter 135 mm
ls/d ratio 23
injection pressure 1784 bar
ccm displacement 9662
shot weight 8792 g
injection power 1290 cc/s
screw speed 81 1/min
plasticizing power max. 	182 g / s
nozzles attachment force 241 kn
electro-hydraulic equipment
rated power of pump motor 160 kw
installed heating power 93 kw
zones of control cylinder heating 7
dry run number 648 1/h
dry run number 5
oil filling 2400 ltr.
dimensions and weights
space requirement approx. 	14,55 x 4.10 x 3,00 m
total weight of 90,000 kg
dimensions of the injection unit 6.90 x 3.20 x 2.80 m
weight of the injection unit 21000 kg
dimensions of the clamping unit 6.20 x 4.04 x 2.95 m
weight of the locking unit 69000 kg
maximum tool weight 43000 kg

accessories:
-dampers
-95 mm plastifiziereinheit down adapted sp 8100

additional information:
-3 x air valves
-6 hydraulic cascades
-hydraulic core control 4 to bwap
-hydraulic core control 4 to fwap
-24 x hot channel control zones
-krauss maffei robot lrx 350
x: 1200 mm
y: 1250 / 1250 mm
z: 4000 mm
c: 0-90 degrees STOCK NO. 12102 MANUFACTURER KRAUSS MAFFEI MACHINE TYPE KM 1600-17200 MX YEAR 2015 SITE ESCHWEILER CONTROL TYPE MC 6 TELETEXT IN GERMAN HOURS OF OPERATION 9187 H DELIVERY TIME IMMEDIATELY PRICE ON REQUEST TECHNICAL DETAILS CLAMPING UNIT CLAMPING FORCE OF 16000 KN TOOL OPENING FORCE, MAX. 1120 KN MOUNTING PLATE (H X V) 2550 X 2100 MM 1850 X 1400 MM CLEAR WIDTH (H X V) TOOL UNCLAMPING STROKE 2700 MM MOULD INSTALLATION HEIGHT MIN. 700 MM MOULD INSTALLATION HEIGHT MAX. 1600 MM OPENING WIDTH 3400 MM EJECTOR STROKE 350 MM EJECTOR FORCE FORWARD/BACK 300 KN INJECTION UNIT SCREW DIAMETER 135 MM LS/D RATIO 23 INJECTION PRESSURE 1784 BAR CCM DISPLACEMENT 9662 SHOT WEIGHT 8792 G INJECTION POWER 1290 CC/S SCREW SPEED 81 1/MIN PLASTICIZING POWER MAX. 182 G / S NOZZLES ATTACHMENT FORCE 241 KN ELECTRO-HYDRAULIC EQUIPMENT RATED POWER OF PUMP MOTOR 160 KW INSTALLED HEATING POWER 93 KW ZONES OF CONTROL CYLINDER HEATING 7 DRY RUN NUMBER 648 1/H DRY RUN NUMBER 5 OIL FILLING 2400 LTR. DIMENSIONS AND WEIGHTS SPACE REQUIREMENT APPROX. 14,55 X 4.10 X 3,00 M TOTAL WEIGHT OF 90,000 KG DIMENSIONS OF THE INJECTION UNIT 6.90 X 3.20 X 2.80 M WEIGHT OF THE INJECTION UNIT 21000 KG DIMENSIONS OF THE CLAMPING UNIT 6.20 X 4.04 X 2.95 M WEIGHT OF THE LOCKING UNIT 69000 KG MAXIMUM TOOL WEIGHT 43000 KG ACCESSORIES: -DAMPERS -95 MM PLASTIFIZIEREINHEIT DOWN ADAPTED SP 8100 ADDITIONAL INFORMATION: -3 X AIR VALVES -6 HYDRAULIC CASCADES -HYDRAULIC CORE CONTROL 4 TO BWAP -HYDRAULIC CORE CONTROL 4 TO FWAP -24 X HOT CHANNEL CONTROL ZONES -KRAUSS MAFFEI ROBOT LRX 350 X: 1200 MM Y: 1250 / 1250 MM Z: 4000 MM C: 0-90 DEGREES
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 1 kg<br/>dimensions (l x w x h) approx.: 360 x 200 x 100 mm<br/>description: see photo WEIGHT APPROX.: 1 KG
DIMENSIONS (L X W X H) APPROX.: 360 X 200 X 100 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock no. 11823
manufacturer angel
machine type's 1350-250 hl
built in 1995
site eschweiler
control type cc100 - a02
teletext in german
delivery time immediately
price on request
technical details
clamping unit
closing force 2500 kn
mounting plate (h x v) 1050 x 650 mm
tool unclamping stroke 850 mm
mould installation height min. 	350 mm
opening width 1200 mm
ejector stroke 200 mm
ejector force forward/back 82 kn
injection unit
screw diameter 60 mm
injection pressure 1481 bar
stroke volume 735 cm3
shot weight 662 g
injection power 318 cc/s
screw speed 228 1/min
nozzles attachment force 110 kn
electro-hydraulic equipment
rated power of pump motor 37 kw
installed heat output of 21 kw
oil filling 460 ltr.
dimensions and weights
space requirement approx. 	7.00 x 2.00 x 2.46 m
total weight 20,000 kg

accessories:
-dampers

additional information:
-3 x hydraulic core trains
-robot interface according to euromap 12 STOCK NO. 11823 MANUFACTURER ANGEL MACHINE TYPE'S 1350-250 HL BUILT IN 1995 SITE ESCHWEILER CONTROL TYPE CC100 - A02 TELETEXT IN GERMAN DELIVERY TIME IMMEDIATELY PRICE ON REQUEST TECHNICAL DETAILS CLAMPING UNIT CLOSING FORCE 2500 KN MOUNTING PLATE (H X V) 1050 X 650 MM TOOL UNCLAMPING STROKE 850 MM MOULD INSTALLATION HEIGHT MIN. 350 MM OPENING WIDTH 1200 MM EJECTOR STROKE 200 MM EJECTOR FORCE FORWARD/BACK 82 KN INJECTION UNIT SCREW DIAMETER 60 MM INJECTION PRESSURE 1481 BAR STROKE VOLUME 735 CM3 SHOT WEIGHT 662 G INJECTION POWER 318 CC/S SCREW SPEED 228 1/MIN NOZZLES ATTACHMENT FORCE 110 KN ELECTRO-HYDRAULIC EQUIPMENT RATED POWER OF PUMP MOTOR 37 KW INSTALLED HEAT OUTPUT OF 21 KW OIL FILLING 460 LTR. DIMENSIONS AND WEIGHTS SPACE REQUIREMENT APPROX. 7.00 X 2.00 X 2.46 M TOTAL WEIGHT 20,000 KG ACCESSORIES: -DAMPERS ADDITIONAL INFORMATION: -3 X HYDRAULIC CORE TRAINS -ROBOT INTERFACE ACCORDING TO EUROMAP 12
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 14.500 €
Ubicación: Land-serial number: 0-240-14-1771 <br/>weight approx.: 13000 kg<br/>cutting length: 4300 mm<br/>control: power control, ipc <br/>dimensions (l x w x h) approx.: 15000 x 2400 x 2400 mm<br/>cutting height: 124 mm<br/>main motor: 18 kw<br/>scoring saw: 2,2 kw<br/>cutting depth: 4250 / 7000 mm<br/>software: cadmatic 4.0 <br/>saw blade protection: 125 mm<br/>max. opening of clamps: 130 mm<br/>clamps piece: 2-fing., 7 piece<br/>main saw blade: max. 450  mm<br/>scoring saw blade: max. 340 mm<br/>air table: 4 <br/>lift table: nein / no <br/>saw carriage speed forward: 5 - 150 m/min<br/>saw carriage speed reverse: 150 m/min<br/>program fence speed forward: 80 m/min<br/>program fence speed reverse: 80 m/min<br/>total power approx: 27 kw<br/>description: <b>holzma hpp 10/43/43 panel saw with label printer</b><br> <br> plate size max.: 4100 x 2070 mm,<br> plate size min.: 2440 x 600 mm,<br> plate thickness max.: 35 mm,<br> plate thickness min.: 3 mm (from rear), 0.8 mm (from front),<br> panel height max.: 80 mm,<br> package height for finished cut max.: 70 mm,<br> finished part size min.: 50 x 50 mm,<br> monitor: 17 inch tft flat-panel display,<br> working height: 1020 mm,<br> required air pressure: 6 bar,<br> compressed air requirement: 210 nl/min,<br> v at suction socket: approx. 26m/s,<br> negative pressure min: 1200 pa,<br> exhaust air volume: 5800 m3/h,<br> label printer: type pica 104,<br> camera monitoring of the loading area,<br> suction connection chip channel: 1 piece 200 mm,<br> suction connection pressure beam: 2 pieces 150 mm,<br> features: tension-free sawing, program pusher travel 7000 mm, plate pre-storage on machine<br> <br> all bids subject to reservations - please see our notes provided in <i>special auction terms</i> SERIAL NUMBER: 0-240-14-1771
WEIGHT APPROX.: 13000 KG
CUTTING LENGTH: 4300 MM
CONTROL: POWER CONTROL, IPC
DIMENSIONS (L X W X H) APPROX.: 15000 X 2400 X 2400 MM
CUTTING HEIGHT: 124 MM
MAIN MOTOR: 18 KW
SCORING SAW: 2,2 KW
CUTTING DEPTH: 4250 / 7000 MM
SOFTWARE: CADMATIC 4.0
SAW BLADE PROTECTION: 125 MM
MAX. OPENING OF CLAMPS: 130 MM
CLAMPS PIECE: 2-FING., 7 PIECE
MAIN SAW BLADE: MAX. 450 MM
SCORING SAW BLADE: MAX. 340 MM
AIR TABLE: 4
LIFT TABLE: NEIN / NO
SAW CARRIAGE SPEED FORWARD: 5 - 150 M/MIN
SAW CARRIAGE SPEED REVERSE: 150 M/MIN
PROGRAM FENCE SPEED FORWARD: 80 M/MIN
PROGRAM FENCE SPEED REVERSE: 80 M/MIN
TOTAL POWER APPROX: 27 KW
DESCRIPTION: HOLZMA HPP 10/43/43 PANEL SAW WITH LABEL PRINTER

PLATE SIZE MAX.: 4100 X 2070 MM,
PLATE SIZE MIN.: 2440 X 600 MM,
PLATE THICKNESS MAX.: 35 MM,
PLATE THICKNESS MIN.: 3 MM (FROM REAR), 0.8 MM (FROM FRONT),
PANEL HEIGHT MAX.: 80 MM,
PACKAGE HEIGHT FOR FINISHED CUT MAX.: 70 MM,
FINISHED PART SIZE MIN.: 50 X 50 MM,
MONITOR: 17 INCH TFT FLAT-PANEL DISPLAY,
WORKING HEIGHT: 1020 MM,
REQUIRED AIR PRESSURE: 6 BAR,
COMPRESSED AIR REQUIREMENT: 210 NL/MIN,
V AT SUCTION SOCKET: APPROX. 26M/S,
NEGATIVE PRESSURE MIN: 1200 PA,
EXHAUST AIR VOLUME: 5800 M3/H,
LABEL PRINTER: TYPE PICA 104,
CAMERA MONITORING OF THE LOADING AREA,
SUCTION CONNECTION CHIP CHANNEL: 1 PIECE 200 MM,
SUCTION CONNECTION PRESSURE BEAM: 2 PIECES 150 MM,
FEATURES: TENSION-FREE SAWING, PROGRAM PUSHER TRAVEL 7000 MM, PLATE PRE-STORAGE ON MACHINE

ALL BIDS SUBJECT TO RESERVATIONS - PLEASE SEE OUR NOTES PROVIDED IN SPECIAL AUCTION TERMS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-6 main spindles
with many tooling and spare parts  6 MAIN SPINDLES WITH MANY TOOLING AND SPARE PARTS
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Precio: used machinery auction RESALE 42.500 €
Ubicación: Land-weight approx.: 30000 kg<br/>dimensions (l x w x h) approx.: 1 x 1 x 1 mm<br/>description: lot 5 consists of lots 1-4 of this auction:<br> <br> - holzma profiline hpp 510/43/43 panel saw, year 2007<br> - holzma hpp 380/43/43 panel saw, bj 2006<br> - bargstedt thl 21/26/10 area storage, bj 1996/2006<br> - scm exhauser / central extraction, bj 2012<br> <br> the technical descriptions can be found in the art. 496629, 496630, 496905 and 497191 (lots 1 to 4).<br> <br> note:<br> the sale succeeds first under reserve. for more details, see the general auction conditions (gac) for this auction.<br> <br> - if the highest bid in this lot no. 5 is higher than the sum of the highest bids in lots 1 to 4, all lots 1 to 4 are sold to the highest bidder in lot 5<br> - but if the individual bids in lots 1 to 4 in total are higher than the highest bids in the lot no. 5, each lot 1 to 4 is sold individually to the respective highest bidder.<br> WEIGHT APPROX.: 30000 KG
DIMENSIONS (L X W X H) APPROX.: 1 X 1 X 1 MM
DESCRIPTION: LOT 5 CONSISTS OF LOTS 1-4 OF THIS AUCTION:

- HOLZMA PROFILINE HPP 510/43/43 PANEL SAW, YEAR 2007
- HOLZMA HPP 380/43/43 PANEL SAW, BJ 2006
- BARGSTEDT THL 21/26/10 AREA STORAGE, BJ 1996/2006
- SCM EXHAUSER / CENTRAL EXTRACTION, BJ 2012

THE TECHNICAL DESCRIPTIONS CAN BE FOUND IN THE ART. 496629, 496630, 496905 AND 497191 (LOTS 1 TO 4).

NOTE:
THE SALE SUCCEEDS FIRST UNDER RESERVE. FOR MORE DETAILS, SEE THE GENERAL AUCTION CONDITIONS (GAC) FOR THIS AUCTION.

- IF THE HIGHEST BID IN THIS LOT NO. 5 IS HIGHER THAN THE SUM OF THE HIGHEST BIDS IN LOTS 1 TO 4, ALL LOTS 1 TO 4 ARE SOLD TO THE HIGHEST BIDDER IN LOT 5
- BUT IF THE INDIVIDUAL BIDS IN LOTS 1 TO 4 IN TOTAL ARE HIGHER THAN THE HIGHEST BIDS IN THE LOT NO. 5, EACH LOT 1 TO 4 IS SOLD INDIVIDUALLY TO THE RESPECTIVE HIGHEST BIDDER.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: amada
model: lc 3015 x1 nt
application type: laser cutting
machine type: laser cutting machine
availability: immediately
construction year: 2006
production hours: 66265
location: czech republic
origin country: japan

general data:
measurements width: 6670 mm
measurements depth: 3260 mm
measurements height: 2100 mm
machine weight: 11700 kg

main drive:
laser brand: amada 
laser power: 4 kw
laser type: co2 

control unit:
brand: amada
model: lc20bp2
cnc main language: english
cnc language customizable: yes

movement:
x-axis movement: 3100 mm
y-axis movement: 1550 mm
z-axis movement: 120 mm

workpiece:
workpiece x: 3150 mm
workpiece y: 1525 mm
workpiece z: 19 mm
workpiece weight: 690 kg

max material thickness:
steel: 20 mm
stainless steel: 15 mm
aluminium: 12 mm

media:
power consumption: 71 kva
 OVERVIEW: BRAND: AMADA MODEL: LC 3015 X1 NT APPLICATION TYPE: LASER CUTTING MACHINE TYPE: LASER CUTTING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2006 PRODUCTION HOURS: 66265 LOCATION: CZECH REPUBLIC ORIGIN COUNTRY: JAPAN GENERAL DATA: MEASUREMENTS WIDTH: 6670 MM MEASUREMENTS DEPTH: 3260 MM MEASUREMENTS HEIGHT: 2100 MM MACHINE WEIGHT: 11700 KG MAIN DRIVE: LASER BRAND: AMADA LASER POWER: 4 KW LASER TYPE: CO2 CONTROL UNIT: BRAND: AMADA MODEL: LC20BP2 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MOVEMENT: X-AXIS MOVEMENT: 3100 MM Y-AXIS MOVEMENT: 1550 MM Z-AXIS MOVEMENT: 120 MM WORKPIECE: WORKPIECE X: 3150 MM WORKPIECE Y: 1525 MM WORKPIECE Z: 19 MM WORKPIECE WEIGHT: 690 KG MAX MATERIAL THICKNESS: STEEL: 20 MM STAINLESS STEEL: 15 MM ALUMINIUM: 12 MM MEDIA: POWER CONSUMPTION: 71 KVA
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-cutting diameter: 225 mm<br/>dimensions of saw-band: 2480 x 27 x 0,9 mm<br/>table height: 935 mm<br/>cutting speed: 45 + 90 m/min<br/>: 225 mm<br/>: 145 mm<br/>: 90 mm<br/>: 150 x 245 mm<br/>: 190 x 150 mm<br/>capacity 60 degrees: flat: 120 x 90 mm<br/>total power requirement: 1,1 kw<br/>weight of the machine ca.: 0,24 t<br/>dimensions (lxwxh): 1380 x 580 x 930 mm<br/>wmt promotional price !!! 2899, -eur<br/>? miter left 60 °<br/>? quick-action vice with quick-release device a.<br/>? quick release lever for easy handling<br/>? frame and gearbox in one piece, very quiet cut and very low vibration<br/>? electrical monitoring of belt tension and belt break, saw blade cover.<br/>? saw blade guide made of carbide<br/>? large machine bed<br/>? machine base (disassembled) with automatic cooling<br/>the autocut system consists of:<br/>hydraulic cylinder, feed control, spring assembly, limit switch<br/>automatic saw frame lowering over the hydraulic<br/>cylinder, infinitely adjustable feed, with limit switch<br/>at the end of the cut. overdrive lowering of the saw frame<br/>from the rest position to the workpiece, then switch over<br/>to normal saw feed (e.g., for scribing).<br/>manual operation: the hydraulic cylinder works as a brake cylinder<br/>(for example, for notching). through the brake cylinder can<br/>the saw should be positioned in every position during the return stroke.<br/><br/><br/><br/><br/> CUTTING DIAMETER: 225 MM
DIMENSIONS OF SAW-BAND: 2480 X 27 X 0,9 MM
TABLE HEIGHT: 935 MM
CUTTING SPEED: 45 + 90 M/MIN
: 225 MM
: 145 MM
: 90 MM
: 150 X 245 MM
: 190 X 150 MM
CAPACITY 60 DEGREES: FLAT: 120 X 90 MM
TOTAL POWER REQUIREMENT: 1,1 KW
WEIGHT OF THE MACHINE CA.: 0,24 T
DIMENSIONS (LXWXH): 1380 X 580 X 930 MM
WMT PROMOTIONAL PRICE !!! 2899, -EUR
? MITER LEFT 60 °
? QUICK-ACTION VICE WITH QUICK-RELEASE DEVICE A.
? QUICK RELEASE LEVER FOR EASY HANDLING
? FRAME AND GEARBOX IN ONE PIECE, VERY QUIET CUT AND VERY LOW VIBRATION
? ELECTRICAL MONITORING OF BELT TENSION AND BELT BREAK, SAW BLADE COVER.
? SAW BLADE GUIDE MADE OF CARBIDE
? LARGE MACHINE BED
? MACHINE BASE (DISASSEMBLED) WITH AUTOMATIC COOLING
THE AUTOCUT SYSTEM CONSISTS OF:
HYDRAULIC CYLINDER, FEED CONTROL, SPRING ASSEMBLY, LIMIT SWITCH
AUTOMATIC SAW FRAME LOWERING OVER THE HYDRAULIC
CYLINDER, INFINITELY ADJUSTABLE FEED, WITH LIMIT SWITCH
AT THE END OF THE CUT. OVERDRIVE LOWERING OF THE SAW FRAME
FROM THE REST POSITION TO THE WORKPIECE, THEN SWITCH OVER
TO NORMAL SAW FEED (E.G., FOR SCRIBING).
MANUAL OPERATION: THE HYDRAULIC CYLINDER WORKS AS A BRAKE CYLINDER
(FOR EXAMPLE, FOR NOTCHING). THROUGH THE BRAKE CYLINDER CAN
THE SAW SHOULD BE POSITIONED IN EVERY POSITION DURING THE RETURN STROKE.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table size: 440 x 850 mm x path: 600 mm y path: 450 mm z-weg: 400 mm spindle retainer: sk 40 spindle speeds: 20-4000 rpm operating voltage: 380 v total power consumption: approx. 12 kva kw space: 2550 x 2000 x 1950 mm weight: 2700 kg 
 TABLE SIZE: 440 X 850 MM X PATH: 600 MM Y PATH: 450 MM Z-WEG: 400 MM SPINDLE RETAINER: SK 40 SPINDLE SPEEDS: 20-4000 RPM OPERATING VOLTAGE: 380 V TOTAL POWER CONSUMPTION: APPROX. 12 KVA KW SPACE: 2550 X 2000 X 1950 MM WEIGHT: 2700 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 1000 x 800 x 2100 mm<br/>description: approx. 54 pcs. WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 800 X 2100 MM
DESCRIPTION: APPROX. 54 PCS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet 
  
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by spanish husky injection molding systems s.a on year 2005 and it has a nominal capacity of 18600 preform with weight 44 gram for 1.5 liter pet bottles. neck format is 28 mm light bpf - see attached preform format. 
  
the equipment was upgraded on 2012 with complete new hmi control panel which contains ibm compatible pc, new software and complete machine went through thorough service by husky. the line was closed in 2014 and has kept installed and in warm condition.  equipment is in very good operational condition. 
  
the delivery includes 
- granule feeding system with a box tipper, hoper and air conveying system 
- granule drying and handling system 
- injection molding machine 
- mold cooling compressors and evaporative coolers 
- hot runner 
- 3-sectional robot 
 
technical data:
 
manufacturer:                         husky injection molding systems s.a
machine type:                        g 600 pet p/120/130 e140
manufacturing year:               2005 
total operating hours:            60312  
clamping force:                     600 tons
mold for:                                96 preforms 
clamping cycle:                     18 seconds
nominal capacity                   18600 preforms/hour  
current mold for                    44 gram 1.5 liter pet
current neck format:              light bpf – 28 mm     
 
 INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY SPANISH HUSKY INJECTION MOLDING SYSTEMS S.A ON YEAR 2005 AND IT HAS A NOMINAL CAPACITY OF 18600 PREFORM WITH WEIGHT 44 GRAM FOR 1.5 LITER PET BOTTLES. NECK FORMAT IS 28 MM LIGHT BPF - SEE ATTACHED PREFORM FORMAT. THE EQUIPMENT WAS UPGRADED ON 2012 WITH COMPLETE NEW HMI CONTROL PANEL WHICH CONTAINS IBM COMPATIBLE PC, NEW SOFTWARE AND COMPLETE MACHINE WENT THROUGH THOROUGH SERVICE BY HUSKY. THE LINE WAS CLOSED IN 2014 AND HAS KEPT INSTALLED AND IN WARM CONDITION. EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION. THE DELIVERY INCLUDES - GRANULE FEEDING SYSTEM WITH A BOX TIPPER, HOPER AND AIR CONVEYING SYSTEM - GRANULE DRYING AND HANDLING SYSTEM - INJECTION MOLDING MACHINE - MOLD COOLING COMPRESSORS AND EVAPORATIVE COOLERS - HOT RUNNER - 3-SECTIONAL ROBOT TECHNICAL DATA: MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S.A MACHINE TYPE: G 600 PET P/120/130 E140 MANUFACTURING YEAR: 2005 TOTAL OPERATING HOURS: 60312 CLAMPING FORCE: 600 TONS MOLD FOR: 96 PREFORMS CLAMPING CYCLE: 18 SECONDS NOMINAL CAPACITY 18600 PREFORMS/HOUR CURRENT MOLD FOR 44 GRAM 1.5 LITER PET CURRENT NECK FORMAT: LIGHT BPF – 28 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 2600 x 2300 x 2400 mm<br/>description: machine number 1646, with fanuc cnm cnc-control, with oil tempering unit oil matic ktvm-6a-l, serial number 8906628, travels x/y/z 800 x 410 x 510, rapid traverse in the axes x/y/z 20/20/15 m/min., table dimensions 1100 x 450 mm, with 4 t-slots, with 30-fold tool changer, including the tool holders and tools on the tool magazine, speed range 0 to 8000 rpm, including indexing device, attention: technical data without guarantee WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 2600 X 2300 X 2400 MM
DESCRIPTION: MACHINE NUMBER 1646, WITH FANUC CNM CNC-CONTROL, WITH OIL TEMPERING UNIT OIL MATIC KTVM-6A-L, SERIAL NUMBER 8906628, TRAVELS X/Y/Z 800 X 410 X 510, RAPID TRAVERSE IN THE AXES X/Y/Z 20/20/15 M/MIN., TABLE DIMENSIONS 1100 X 450 MM, WITH 4 T-SLOTS, WITH 30-FOLD TOOL CHANGER, INCLUDING THE TOOL HOLDERS AND TOOLS ON THE TOOL MAGAZINE, SPEED RANGE 0 TO 8000 RPM, INCLUDING INDEXING DEVICE, ATTENTION: TECHNICAL DATA WITHOUT GUARANTEE
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more AUTEFA types: