axa vhc3 6000 todas las categorias

Ubicación: 46 MW GE LM 6000 PC SPRINT GAS TURBINE 46 MW GE LM 6000 PC SPRINT GAS TURBINE, BRUSH TURBO GENERATOR, COMPLETE CHP PLANT NATURAL GAS, 11.5 KV, 50 HZ, YEAR OF COMMISSIONING 2006, TOTAL RUNNING HOURS 43970 HRS., TRANSFORMERS, ELECTRICAL SYSTEMS, ELECTRICAL PANELS, CONTROL SYSTEMS, AIR SYSTEM, COOLING SYSTEM, LUBRICATING SYSTEM, EXHAUST SYSTEM, PUMPS, WATER SYSTEM, FIRE FIGHTING SYSTEM, HRSG AND MUCH MORE. MAINTAINED BY OEM SINCE NEW. TURBINE PACKAGE PRICED FOR IMMEDIATE SALE.

Ubicación: WEIGHT APPROX.: 10500 KG
WORKPIECE DIAMETER: 3 - 32 MM
CONTROL: FANUC
DIMENSIONS (L X W X H) APPROX.: 8000 X 3500 X 3000 MM
GRINDING WHEEL DIAMETER MAX.: 400 MM
GRINDING SLIDE SWIVABLE +/-: 0,5/0,5 °
GRINDING SPINDLE SPEED: 10000 RPM
DESCRIPTION: JUNKER QUICKPOINT 5002/50 CNC TOOL GRINDING MACHINE
- SERIAL NO.: 1703
- THE MACHINE IS DESIGNED FOR FULL-AUTOMATIC PRE-GRINDING AND FINISH GRINDING OF OUTER CONTOUR AT HSS- AND HM-TOOLS. THE FEEDING AND DISCHARGE OF THE WORKPIECES IS MADE FULLY AUTOMATIC VIA EXTERNAL LOADING DEVICE
- OPERATING VOLTAGE: 400 V, 50 HZ
- CONNECTED LOAD: 70 KVA
- SWING DIAMETER: 32 MM
- CLAMPING LENGTH: MAX. 800 MM
- TRAVEL OF Z-AXIS: MAX. 900 MM
- WORKPIECE SPINDLE DIMENSIONS: DIAMETER 100 X 400 MM
- TAILSTOCK LONGITUDINAL ADJUSTMENT: MANUAL VIA CHAIN WHEEL
- ROTATING CENTRE: MK4 OR RATHER JUNKER-STANDARD DIAMETER 75 MM
- GRINDING TABLE FEED AND GRINDING HEADSTOCK DELIVERY: CNC-CONTROLLED
- GRINDING SPINDLE DIMENSIONS: DIAMETER 180 X 400 MM
- FLANGE DIAMETER: 190 MM
- STANDARD DIAMETER: 127 MM
- GRINDING SPINDLE I DRIVE POWER: 24 KW
- GRINDING SPINDLE I SPEED: 6000 RPM
- GRINDING DISC BORE: 127 MM
- COVER WIDTH: 4 MM UND 8 MM
- GRINDING DISC PERIPHERAL SPEED: MAX. 140 M/S
- GRINDING SPINDLE II DRIVE POWER: 16,5 KW
- GRINDING SPINDLE II SPEED: 9000 RPM
- WITH LOADING DEVICE AND DOCUMENTATION
- SEE VIDEO

Ubicación: -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF PRODUCTION 1999 -IDEAL FOR THE PRODUCTION OF WINDOWS TECHNICAL PARAMETERS: -PLANING WIDTH 230 MM -PLANING HEIGHT 150 MM -PNEUMATIC HEAD JUMP RIGHT AND TOP 50 MM -SPINDLE LOWER 5.5 KW -LEFT AND RIGHT SPINDLES 7.5 KW – THE SPINDLE TOP 5.5 KW -BOTTOM SPINDLE 4 KW -POWER UNDERCUTTING 2.2 KW -UNIT WITH PNEUMATIC DOSKOKIEM -SPINDLE DIAMETER 40 MM -SPINDLE RPM 6000 -ADJUSTABLE FEED SMOOTHLY 3-32 M/MIN -FEED MOTOR 2.2 -FOUR UPPER PINCH ROLLS GEAR -THE UPPER THREE RUBBER ROLLERS PINCH -ADDITIONAL ROLLS FOR THE STRIP SHAFT -RUBBER DRAW ROLLER IN THE COUNTER -ELECTRIC CONTROL HEAD TOP -THE LENGTH OF THE TABLE TOP 1970 MM -DIAMETER OF THE NOZZLE 140 MM OVERALL DIMENSIONS: -LENGTH 390 CM -175 CM WIDTH -HEIGHT 190 CM -WEIGHT 2800 KG

Ubicación: WEIGHT APPROX.: 6000 KG
DIMENSIONS (L X W X H) APPROX.: 1700 X 1600 X 2100 MM
DESCRIPTION: WORKING WIDTH 3000 MM
SEE PHOTOS
THIS ARTICLE IS INTENDED FOR SALE OUTSIDE THE CE AREA
PAYMENT WITHIN AND NOT LATER THAN 8TH MARCH 2019
PICK UP EXCLUSIVELY ON 13TH MARCH 2019
OTHERWISE IT WILL BE CHARGED EXTRA COST FOR MACHINERY TRANSPORT

Ubicación: -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE 2003 TECHNICAL PARAMETERS: -PLANING WIDTH 230 MM -PLANING HEIGHT 120 MM -THE TURNOVER OF THE 6000-RPM HEADS -ADJUST THE HEADS IN TWO AXES 1. LOWER HEAD 5.5 KW 2. HEAD RIGHT 5.5 KW 3. HEAD LEFT 7.5 KW 4. UPPER HEAD 7.5 KW 5. LOWER HEAD 5.5 KW 6. UNIVERSAL HEAD 7.5 KW -FEED MOTOR 3 KW -ADJUSTABLE FEED SPEED THE WARIATORZE -5-25 FEED SPEED M/MIN -CARDAN SHAFTS FEED -FOUR TOP STEEL ROLLER STRETCHING -FOUR TOP ROLLERS RUBBER STRETCHING -ONE ROLL OF STEEL IN THE COUNTERTOP -ELECTRICAL HEIGHT ADJUSTMENT – AUTOMATIC CENTRAL LUBRICATION -PNEUMATIC CLAMPS -TABLE LENGTH 2450 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 500 CM -WIDTH: 180 CM -HEIGHT 170 CM -WEIGHT ~ 4500 KG

Ubicación: WEIGHT APPROX.: 10500 KG
CUTTING LENGTH: 6000 MM
DIMENSIONS (L X W X H) APPROX.: 12072 X 8626 X 2000 MM
CUTTING HEIGHT: 110 MM
MAIN MOTOR: 13,2 KW
SCORING SAW: 2,2 KW
SOFTWARE: G-DRIVE (EXCL. LIZENZ)
SAW BLADE PROTECTION: 125 MM
MAX. OPENING OF CLAMPS: 117 MM
CLAMPS PIECE: 7 PIECE
MAIN SAW BLADE: 450 MM
SCORING SAW BLADE: 215 MM
AIR TABLE: 6
LIFT TABLE: 2200 X 6000 MM
SAW CARRIAGE SPEED FORWARD: 170 M/MIN
SAW CARRIAGE SPEED REVERSE: 170 M/MIN
PROGRAM FENCE SPEED FORWARD: 1-25 M/MIN
PROGRAM FENCE SPEED REVERSE: 85 M/MIN
TOTAL POWER APPROX: 35,5 KW
DESCRIPTION: - USEFUL LENGTH OF CUT MM 6000 - LIFTING TABLE FOR THE PANEL OF PANELS, POSSIBLE DOSAGE FROM THREE SIDES, LEFT, RIGHT, DIRECT - DIMENSIONS OF THE LIFTING TABLE, 6000X2200 MM - SAW BLADE HEIGHT 125 MM - USEABLE SAW BLADE HEIGHT, 110 MM - AUTOMATIC POSITIONING OF THE SAW BLADE TO THE OPTIMUM HEIGHT - THE POWER OF THE MAIN ELECTRIC MOTOR IS 13.2 KW - THE POWER OF A SMALLER ELECTRIC MOTOR OF 2.2 KW - DIAMETER OF SAW BLADE IS 450 MM - MECHANICAL PREPARATION FOR QUICK DISASSEMBLY AND ASSEMBLY OF SAW BLADES - THE SPEED OF RETURN OF THE SAW BLADE IS 170 M / MIN - TWO-SIDED ATTACHMENT OF THE SAW CHISEL - DOUBLE-SIDED ATTACHMENT OF THE SAWS, LONG-DISTANCE GUIDES THAT ENSURE OPTIMUM STABILITY DURING MACHINING - UNIQUE SOLUTION - THE DIAMETER OF THE LOWER SUCTION OPENING IS 200 MM - PREAMBLE OF THE UPPER SUCTION OPENINGS, 115MM X 3 - OPENING OF THE THRUST PLIERS 117 MM - SPEED OF MOVING THE CONSOLE WITH PLIERS 1-25 (LIMITED DUE TO THE CE REGULATIONS) - HIGH FREQUENCY CONVERTER FOR SPEED SETTING, BRUSHLESS MOTOR -REMOTE SPEED OF THE CONSOLE 85M / MIN -CLAMPS: 7 PIECES - FRONT ALIGNMENT PLATES FOR 4 SHEETS - ALU PROFILES WITH WHEELS OF LARGER DIAMETER FOR LESS RESISTANCE WHEN PLACING A PACKAGE OF PLATES - AN INNOVATIVE SYSTEM FOR PRECISE DOSING OF THIN PLATES IN WHICH THE ACTUAL HEIGHT OF THE TOP PLATE IS READ BY THE SENSOR, AND THEN THE SYSTEM DE

Ubicación: -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE 2007 TECHNICAL PARAMETERS: -PLANING WIDTH 150 MM -PLANING HEIGHT 50 MM -SPINDLE DIAMETER 40 MM -DTR -EQUIPPED WITH TOOLS -ODOMETER 1173 (H) 1 HEAD 11 KW-6000 U/MIN 2 UPPER HEAD 22 KW 7000 U/MIN 3-HEAD 5.5 KW 6000 U/MIN -FEED MOTOR 2.2 KW -ADJUSTABLE FEED ON THE INVERTER -CARDAN SHAFTS FEED -TWO SIDE PNEUMATIC ROLLERS -FIVE OF THE UPPER STALOWANY OF DRAWING ROLLER -ONE RUBBER ROLL TOP -TABLE TOP RYFLOWANY -THE LENGTH OF THE TABLE TOP THE INITIAL 1975 MM -ELECTRICAL CONTROL HEAD -ELECTRICAL HEIGHT ADJUSTMENT OF THE ROLLERS – AUTOMATIC CENTRAL LUBRICATION OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 320 CM – WIDTH 200 CM -HEIGHT 190 CM -VAH ~ 2700 KG

Ubicación: WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 3000 X 2500 MM
DESCRIPTION: ? WORKING WIDTH MIN./MAX. 30/220 MM ? WORKING HEIGHT MIN./MAX. 30/100 MM ? WORKPIECE LENGTH MIN./MAX. 220/2600 MM ? FEED RATE 6 TO 12 M /MIN
EQUIPPED WITH: 1 CROSS-CUT SAW, 3 KW, SAW BLADE DIAMETER 350 MM,
1 TAP AND SLOT SPINDLE, 11 KW, FOR 7 TOOLS, CLAMPING LENGTH 600 MM, VERTICAL STROKE 6 X 85 MM ,SPINDLE DIAMETER 50 MM
1ST PROFILING SPINDLE 7,5 KW , FOR 3 TOOLS,VERTICAL STROKE 2 X 95 MM, ?HORIZONTAL STROKE 80 MM, SPINDLE DIAMETER 50 MM, TOOL CLAMPING ?ENGTH 285 MM
2ND PROFILING SPINDLE 7,5 KW, FOR 3 TOOLS, VERTICAL STROKE 2 X 95 MM, ? HORIZONTAL STROKE 80 MM, SPINDLE DIAMETER 50 MM, TOOL CLAMPING ? LENGTH 285 MM
1 GROOVED SPINDLE HORIZONTALLY FROM ABOVE BETWEEN THE 2 PROFILING SPINDLES, 3.0 KW,
1 RIGHT-HAND REAMER FOR MILLING IN THE FITTING GROOVE, 3.0 KW ? VERTICAL STROKE 1 X 85 MM, SPINDLE DIAMETER 40 MM, TOOL CLAMPING ? LENGTH 125 MM
EQUIPPED WITH STEHLE IV 68 TOOL-KIT TYPE 6000

Ubicación: CONTROL SYSTEM: UNI-PRO NC80-C TABLE CLAMPING SURFACE: 630 X 500 MM X-AXIS: 800 MM Y-AXIS: 630 MM Z-AXIS: 530 MM SPINDLE SPEED: 0-6000 / MIN. MAXIMUM TABLE LOAD: 600 KG

Ubicación: STAINLESS STEEL CONSTRUCTION, BELT MADE FROM PLASTIC\R\NBELT: WIDTH 700 MM, LENGTH 6000 MM\R\NFRAME: WIDTH 780 MM, HEIGHT 200 MM

Ubicación: MECOF CS NC MOBILE COLUMN MILLING MACHINE CONSTRUCTION YEAR 1982 EQUIPPED WITH HEIDENHAIN TNC530 CONTROL (RETROFIT 2008) MAIN TECHNICAL FEATURES: - TABLE 1235 X 8000 MM AXLE TRAVEL: - LONGITUDINAL OF THE UPRIGHT (X AXIS) 6000 MM MILLING - TRANSVERSE OF THE HEAD (Y AXIS) 1000 MM - VERTICAL OF THE HEAD (Z AXIS) 2000 MM SPINDLE: - ENGINE POWER C.C. 25 HP - ALTER TYPE DRIVE. 02/213 - ISO 50 CONE INSTALLED POWER 40 KW RATED CURRENT 65 A

Ubicación: CAP. MAX. 6000 PCS./H\R\NDOUGHWEIGHTRANGE CA. 40 - 90 G\R\N

Ubicación: ONE USED BRUDERER BSTA 41 HIGH SPEED PUNCH PRESS. ORIGINAL YEAR OF MFG 1983. SWISS ORIGIN. HYDROSTATIC DRIVE. ANALOGUE CONTROLS. NOMINAL CAPACITY 40 TONS. ADJUSTABLE STROKE 13 - 57 MM. SPEED RANGE 100 TO 1200 STROKES PER MINUTE MAX. BOLSTER (TOOL CLAMPING) AREA 670 MM X 550 MM. MAX TOOL LOADING WIDTH 690 MM LEFT TO RIGHT. FITTED WITH BBV 202/120 ROLL FEED ON LEFT-HAND SIDE. MAX STRIP WIDTH 200 MM. FRONT AND REAR SAFETY GUARDS. OPERATORS CONTROL CABINET FREESTANDING. POWER SUPPLY 400 VOLT, 50 HZ. WEIGHT OF PRESS APPROX. 6000 KGS.

Ubicación: ROLLER TABLE: JA/NEIN
:4 KW
:4 KW
:3200/4500/6000 U/MIN.
CUTTING WIDTH:900 MM
DUST SUCTION HOOD:120 + 160 MM

Ubicación: CHOICE OF TWO USED BIHLER GRM100 MULTISLIDE PUNCHING AND FORMING MACHINES, YEAR OF MANUFACTURE 1985. GERMAN ORIGIN. EACH EQUIPPED WITH 4X FORMING SLIDES AND 2X 18 TON PRESS STATIONS (16 MM STROKE), GRIPPER FEED ON RIGHT-HAND SIDE WITH STRAIGHTENER. MAX WIDTH OF STRIP 100 MM. MAX WIRE DIAMETER 10 MM. STANDARD FEED LENGTH 250 MM MAX. MAX OPERATING SPEED 135 STROKES PER MINUTE APPROX. AIR CLUTCH. APPROX WEIGHT 6000 KGS. POWER SUPPLY 380/400V, 50 HZ.

Ubicación: SAWBLADE TILTABLE: 45 °
LENGTH OF THE ROLLING TABLE:3200 MM
CUTTING WIDTH:1050 MM
MOTOR OUTPUT:5,5 KW
CUTTING HEIGHT: MM
CUTTING HEIGHT AT 45°: MM
SAW BLADE DIAMETER: MM
SPEED:3200/4500/6000 U/MIN.
WEIGHT OF THE MACHINE CA.:900 KG
: MM
: KW
: MM
: -
: MM
: MM
: STK
: -
: -
: -
: -
: -
: MM
: MM
: -
: -
: -
: -
:VORHANDEN -
:JA -
:JA -
:JA -
: -
: -
: -
: STK
: STK
: MM
: SET
: -
: -
: STD
: KG
:3300X1100X1300 CM
: KW
:120+80 MM

Ubicación: FINE PLASMA AND OXY-FUEL CUTTING MACHINE KNIFE-CORTINA 3600 DN. YEAR OF CONSTRUCTION: 1999 SIDE TRAVEL: 2600 MM-260 MM (BURNER UNIT) = 2340 MM STROKE LENGTH: 3600 MM, MAX 3850 MM TRACK LENGTH 6000 MM POSSIBLE LATERAL TRAVEL MECHANICAL: 2900 MM SCHNEIDTISCHAUÃ?ENMAÃ?E 3160MM * 2100MM CUTTING SOURCE FINE PLASMA HYPERTHERM HD 3070 AUTOMATIC GAS CONSOLE INDUCTIVE HEIGHT SCANNING DUST EXTRACTION DONALDSON

Ubicación: TABLE DIMENSIONS:2370X800 MM
MOTOR OUTPUT:5/6 KW
SPINDLE DIAMETER:30 MM
REUS:3000/4500/6000/9000 U/MIN
WEIGHT:CA. 1000 KG
YEAR:

Ubicación: CONTROL: HEIDENHAIN TNC 426 TURNTABLE - 4TH AXIS SWIVEL HEAD HOURS OF OPERATION: APPROX. 15,000 HOURS INCLUDING HANDWHEEL PROCEDURES: X: 800 MM Y: 650 MM W: 550 MM FEED (X, Y, Z): 10,000 MM / MIN ELIGANG: 15 M / MIN SPINDLE SPEED: 6300 RPM TABLE DIMENSIONS: 1100 X 600 MM MAXIMUM TABLE LOAD: 500 KG TOOL HOLDER: SK 40 POWER: 17 / 11, 5KW MACHINE WEIGHT: 6000 KG MACHINE DIMENSIONS: APPROX. 5500 X 3500 X 3100 MM

Ubicación: ; GROSS WEIGHT [KG]: 16000; ENGINE: MERCEDES OM442A; ACCESSORIES: 15 METER 250MM PIPES

Ubicación: OMPLETT NEW ELECTRIC - CONTROL AND MOTORS ADTECH. PROCEDURES: X AXIS: 280 MM Y-AXIS: 200 MM Z-AXIS: 250 MM DISTANCE BETWEEN TABLE AND SPINDLE END: 200-400 MM DISTANCE BETWEEN SPINDLE CENTER AND COLUMN FRONT: 300 MM SIZE OF THE TABLE WORK AREA: 500 X 220 MM MAXIMUM LOAD OF THE TABLE: 70 KG SPINDLE SPEED: 6000 RPM SPINDLE TAPER: NT 30 SPINDLE POWER: 3 KW RAPID TRAVERSE RATE (MAX): 20 M / MIN CUTTING SPEED: 5-5000 M / MIN WERKZEUGSCHAFTSYSTEM: BT30 NUMBER OF TOOLS: 10 MAX TOOL DIAMETER: 50 MM MAXIMUM TOOL LENGTH: 200 MM MAXIMUM TOOL WEIGHT / TOTAL WEIGHT OF THE TOOL: 1.5 KG / 12 KG TOOL CHANGE TIME: (TOOL TO TOOL / CHIP TO CHIP): 1.8 S / 4.0 S MACHINE WEIGHT: 1300 KG DIMENSIONS - REQUIRED FLOOR SPACE (L X B X H) - AT THE HIGHEST POSITION OF THE SPINDLE IN THE Z-AXIS: 1200 X 2430 X 2000 MM TRANSPORT HEIGHT: 1900 MM

Ubicación: WORKING RANGE TURNING:
- TURNING DIAMETER (MAX): 5400 MM
- WORPIECE LENGTH MAX.: 2400 MM
- WORKPIECE WEIGHT MAX.: 25000 KG
MAIN SPINDLE:
- SPINDLE REVOLUTIONS (MAX): 40 /MIN
- DRIVE POWER: 40 KW
FACING PLATE (TURNING MACHINE):
- DIAMETER OF SURFACE PLATE: 5000 MM
CROSS BEAM:
- W-AXIS TRAVEL: 1100 MM
CROSS BEAM SLIDE:
- - DRIVE POWER: 40 KW
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 70 KW
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 10000 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 13000 MM
- TOTAL HEIGHT: 6000 MM
- TOTAL WEIGHT APPROX.: 70000 KG
ATTACHMENTS (TURNING):
- EUROPEAN CE STANDARDS: YES:
LAST OVERHAUL: 2012

Ubicación: IN GOOD TECHNICAL CONDITION. PRODUCTION YEAR 2008 CONTROL: HEIDENHAIN TNC 530. WORK SPINDLE DIAMETER: 130 MM. X-AXIS MOVEMENT: 6000 MM. Y RIDE: 2000 MM. SPINDLE SPEED: 1-3000 / MIN. SPINDLE CLAMPING SPINDLE: ISO50. TOTAL POWER: 30 KVA. MACHINE WEIGHT: 18,100 KG.

Ubicación: GRINDING LENGTH: 1000 MM
GRINDING WIDTH: 50 MM
WORKPIECE HEIGHT: 750 MM
TOTAL POWER REQUIREMENT: 14 KVA
WEIGHT OF THE MACHINE CA.: 6000 KG
DIMENSIONS OF THE MACHINE CA.: M

Ubicación: MAX. GLASS DIMENSIONS: 3210X6000MM, WITH ELECTRICAL TILTING DRIVE AND DRIVEN PLASTIC ROLLS.

Ubicación: WEIGHT APPROX.: 6000 KG
DIMENSIONS (L X W X H) APPROX.: 1700 X 1200 X 2900 MM
DESCRIPTION: TWIN FRAME. CAPACITY: 100 TON. TABLE: 500 X 700 MM. STROKE: 20-130 MM

Ubicación: BUILT IN 1994 CONTROL: DEMAG NC4 CLAMPING FORCE: 1500 KN (150 T) SCREW DIAMETER: 40 MM MAXIMUM DOSE: 250 CM3 H.T. NUMBER: 8 CORE: 3 FAN: 2 INPUT POWER: 37 KW OIL: 500 L MAP: CF CARD PRESSURE UP TO 250 BAR MACHINE WEIGHT: 6000 KG

Ubicación: WEIGHT APPROX.: 5500 KG
RUNNING HOURS: 3209 H
LOADING CAPACITY: 3,5 T
LIFTING BRIDGE: DUPLEX
LIFTING HEIGHT: 6000 M
FORK LENGTH OF FORK LIFT: 1200 M
OVERALL HEIGHT: 2150 M
DIMENSIONS (L X W X H) APPROX.: 2400 X 1500 X 2000 MM
DESCRIPTION: - LIFTING CAPACITY: 3,5 T - LIFTING BRIDGE: DUPLEX - LIFTING HEIGHT: 6000 MM - FORK LENGTH: 1200 MM - WORKING HOURS: 3209 H - OVERALL HEIGHT: 2150 MM - CABIN HEATING - SEAT HEATING - SERIAL NUMBER: FN453665

Ubicación: SALAM WE SALE A ROTARY BLOW MOLDER SIDEL SBO 6 SERIE 02 . INCLUDES: - OVEN - PREFORMS ELEVATOR AND POSITIONER, SPEED 6000 B/H, FULL DOCUMENTATION,FOR PET NECK PCO 1810.WITH QUICK CHANGE EXISITING FORMART OF 38MM TYPE BERICAP WITH NEW PANEL IN 2017.

Ubicación: WEIGHT APPROX.: 36000 KG
DIMENSIONS (L X W X H) APPROX.: 11300 X 3680 X 3500 MM
DESCRIPTION: TABLE: 4120 X 1250 MM. GRINDING WHEEL: 500 MM. TRAVELS (X,Y,Z): 4000 X 1200 X 1000 MM. NOTE: MACHINE TO BE REVIEWED/REFURBISHED

Ubicación: CNC LATHE GILDEMEISTER CTX 210 WITH CONTROL HEIDENHAIN CNC PILOT 4290 YEAR OF CONSTRUCTION: 2005 SWING OVER BED RAIL COVER 380 MM TRAVEL IN X 160 MM TRAVEL IN Z: 305 MM SPINDLE BORE: 56 MM SPEED RANGE: 20-6000 RPM WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN 12 STATION TURRET WITH 12 DRIVEN TOOL STATIONS TOOL MEASURING DEVICE PICKUP DEVICE PILOT LIGHT 4 X TAILSTOCK WITH QUILL CHIP CONVEYOR WITH TANK 3 JAW CHUCK HYDRAULIC SMW CAR BLOCK 0 165 MM WITH FOOT SWITCH FOOT SWITCH FOR TAILSTOCK ADJUSTMENT COOLANT SYSTEM COOLANT SPRAY GUN 3 PCS. HEIGHT-ADJUSTABLE MOUNTS OPERATING INSTRUCTIONS

Ubicación: WEIGHT APPROX.: 66000 KG
PLATE WIDTH: 200 MM
PLATE THICKNESS: 0,5 MM
DIMENSIONS (L X W X H) APPROX.: 18000 X 4000 X 1600 MM
TOTAL POWER REQUIREMENT: 185 KW
DESCRIPTION:

USED OCS PROFILING MACHINE FOR THE PRODUCTION OF DRAWER SLIDES, ROLLER GUIDES

MACHINE NO. 133-94

TECHNICAL SPECIFICATIONS

STRIP WIDTH: 200 MM
STRIP THICKNESS: 0,5 MM - 3 MM
WORKING TEMPERATURE: MAX. 40 ° C MIN. 5 ° C
SATURATION: MAX 65% MIN 8%
PROFILE FEED SPEED: 25 M/MIN.
LENGTH TOLERANCE: +/- 0.25 MM
LENGTH OF THE ELEMENTS TO PRODUCING: MAX. 800
TAPE THICKNESS: FROM 0.5 TO 3 MM
MATERIAL FEPO2
THICKNESS TOLERANCE: +/- 5%
BANDWIDTH: MAX. 200 MM
WIDTH TOLERANCE: +/- 5%
FORMING HEADS NO. 40
ROLE SHAFT DIAMETER: 60 MM
DISTANCE BETWEEN THE FORMING HEADS: 200-400 MM
CENTER DISTANCE BETWEEN UPPER AND LOWER SHAFTS: 95-185 MM
HYDRAULIC POWER UNITS NO. 3
OIL DYNAMIC WORKING PRESSURE: MAX. 180 BAR
CAPACITY OF THE OIL TANK: 3520 L

HYDRAULIC POWER UNITS: 185 KW
INSTALLED POWER: 250 KW
SUPPLY: 3X380V 50HZ +/- 10%

Ubicación: VACUUM DRYER ISVE TYPE ES 6 NEW MACHINE, 24 MONTHS GUARANTEE OF THE MANUFACTURER CONSTRUCTION IN CARBON-STEEL OR STAINLESS-STEEL 6M³ LOADING VOLUME 21,5 KW DIMENSIONS OF THE DRYING KILN: DIEMATER 1,60 M LENGTH 6,90 M LENGTH INCL. RAILS 13,00 M TOTAL WEIGHT 2.900 KG DIMENSIONS INSIDE / POSSIBLE WOOD DIMENSIONS 6000 X 1100 X 990 MM (LWH) PLC CONTROL SYSTEM SIEMENS TYPE S7 – 1200 VACUUM PUMP BECKER 100 MC/H 2,2 KW 380 VCA NEW PLANT, 24 MONTHS GUARANTEE OF MANUFACTURER DELIVERY EXW, DELIVERY TIME APPROX. 90 DAYS FROM PURCHASE ORDER

Ubicación: CNC PROCESSING CENTRE\R\NWEEKE\R\NTYPE: PROFILINE ABS 210\R\NYEAR: 2007\R\N\R\NWORKING CENTRE ABS 210 FOR PROCESSING OF RECTANGULAR FRONTS FROM TOP AND BOTTOM :\R\N- VERTICAL DRILLING FROM TOP AND BOTTOM\R\N- PRESSING OF HINGES FROM BOTTOM\R\N- CUTTING OF GROOVES FOR DRAWER BOTTOMS\R\N- MILLING OF GROOVES FOR HANDLE\R\N\R\NWORKPIECE MEASUREMENTS\R\NA) AT ROTATING DOORS:\R\N- HEIGHT OF FRONT: 190 - 2400 MM\R\N- WIDTH OF FRONT: 190 - 750 MM\R\N- THICKNESS: 16 - 33 MM\R\N\R\NB) AT DRAWER / OUTFEED-FRONTS:\R\N- WIDTH OF FRONT: 146 - 1200 MM\R\N- HEIGHT OF FRONT: 100 - 750 MM\R\N- THICKNESS: 16 - 33 MM\R\N\R\NVERTICAL DRILLING UNIT WITH 3 SPINDLES FROM THE TOP\R\N\R\N2X TOP ROUTER 6 KW\R\N- RPM: 6000 - 180000 RPM. (STEPLESS)\R\N\R\NVERTICAL DRILLING UNIT WITH 3 SPINDLES\R\N\R\NPRESSING UNIT FOR HINGES 90-110°\R\N- ADDITIONAL TRAVEL IN Y-DIRECTION\R\N- 2 VIBRATION FEEDING UNITS\R\N\R\NWITH WOODWOP AND WOODSCAN SOFTWARE\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME.\R\N- DATAS ARE FOR INFORMATION AND ARE NOT BINDING.

Ubicación: ALTENDORF PANEL SAW WITH PRE SCORING UNIT TYPE F45 CARRIAGE LENGTH 2800 MM RIGHT SIDE OF THE SAW BLADE CUTTING WIDTH 1000 MM TABLE EXTENSION EXTENSION TABLE HIGH, NARROW BLADE HYDRAULICALLY (VIA FOOT PEDAL) AND 45 ° ANGLE-ADJUSTABLE MAIN SAW SPEEDS: 3000-4000-5000-6000 RPM, SCORING UNIT: 9000 RPM. MOTOR OUTPUT 5.5 KW MOTOR BRAKE GS MARK GOOD CONDITION, FROM TRAINING WORKSHOP CHECKED OPERATING INSTRUCTIONS

Ubicación: X TRAVEL: 650 MM
Y TRAVEL: 600 MM
Z TRAVEL: 500 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- NUMBER OF PROCESSING AXES (EXCL PARALLEL AXES): 5
- .. AMONG OF THEM SIMULTANEOUS CNC AXES: 5
- X-AXIS TRAVEL: 650 MM
- Y-AXIS TRAVEL: 600 MM
- Z-AXIS TRAVEL: 500 MM
TABLE:
- CLAMPING SURFACE DIAMETER: 280 MM
MILLING SPINDLE / HEAD:
- SPINDLE REVOLUTIONS (MAX): 18000 /MIN
- TOOL FIXTURE: HSK A63:
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 76
ELECTRICAL SPECIFICATIONS:
- MAINS POWER SUPPLY: 43 KVA
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 6000 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 6000 MM
- TOTAL HEIGHT: 3000 MM
- TOTAL WEIGHT APPROX.: 11000 KG
ATTACHMENTS:
- WORKPIECE SENSOR: YES:
- CENTRAL LUBRICATION SYSTEM: YES:
- CHIP CONVEYOR: YES:
- COOLANT UNIT: YES:
- THROUGH SPINDLE COOLANT ATTACHMENT: YES:
- CLOSED CABIN: YES:
- EUROPEAN CE STANDARDS: YES:

Ubicación: NOLL FILLING AND ANGELUS SEAMING MACHINE SLIM CANS 250ML STANDARD CANS: 250, 330, 355 AND 500ML SPEED 36000 CPH. NOLL NOLL 1 FILLING MACHINE AH-48 A-44799 1981 ANGELUS NOLL 1 SEAMER 61H 10376480 1981

Ubicación: X TRAVEL: MM
Y TRAVEL: MM
Z TRAVEL: MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 4000 MM
- Y-AXIS TRAVEL: 1000 MM
- Z-AXIS TRAVEL: 1400 MM
TABLE:
- TABLE SURFACE (FRONT-BACK): 4200 MM
- CLAMPING SURFACE DIAMETER: 1100 MM
MILLING SPINDLE / HEAD:
- SPINDLE TYPE: TILTING HEAD:
- SPINDLE REVOLUTIONS (MAX): 6000 /MIN
- NUMBER OF GEARS: 3
- TOOL FIXTURE: ISO SK 50:
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 24
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 10000 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 4750 MM
- TOTAL HEIGHT: 3550 MM
- TOTAL WEIGHT APPROX.: 28000 KG
ATTACHMENTS:
- CHIP CONVEYOR: YES:
- THROUGH SPINDLE COOLANT ATTACHMENT: YES:
- CLOSED CABIN: YES:
- EUROPEAN CE STANDARDS: YES:

Ubicación: CONTROL SYSTEM : SINUMERIC 840D WITHOUT SHOP TURN TURNING OVER BED: 535 MM TURNING OVER CARRIAGE: 290 MM TURNING DIAMETER: 180 MM SPINDLE BORE: 51 (76) MM SPINDLE SPEEDS: 60-6000 RPM TOOL CHANGER POSITIONS: 12 SPINDLE PASSAGE: MAX Ø 58 MM MACHINE DIMENSIONS: 2800 X 1505 X 1920 MM MACHINE WEIGHT: 4300 KG ACCESSORIES: FEEDER MAGAZINE SPACESAVER: 2200 S A18- Ø 6 - 65 LENGTH 1000 MM CONTAINER OF THE COOLING LIQUID COOLING 7 BAR CHIP CONVEYOR CYLINDER- SMW-AUTOBLOK VNK 150/67 SETS OF COLLETS AVAILABILITY: 30.03.2019

Ubicación: WORKPIECE LENGTH: 900 MM
SWING DIA.: 180 MM
CLAMPING LENGTH: 900 MM
WORKPIECE DIAMETER: 20 - 90 MM
SWING DIAMETER: 180 MM
CONTROL: FANUC 160-T MODEL C
C-AXIS: 180 °
B-AXIS: 60 °
Z-AXIS: 1000 MM
SPINDLE SPEEDS: 6000 U/MIN
GRINDING SPINDLE DRIVE: 24 KW
GRINDING SPINDLE SPEED: 6000 U/MIN
GRINDING WHEEL SIZE: 400 X 127 MM
TOTAL POWER REQUIREMENT: 90 KW
WEIGHT OF THE MACHINE CA.: 16 T
DIMENSIONS OF THE MACHINE CA.: M
EXTERNAL GRINDING MACHINE FOR EXTERNAL ROUNDING & SURFACE GRINDING OF
CRANKSHAFTS (MAIN BEARING, FLANGE AND PIN) WITH CBN GRINDING WHEELS AND WITH A
LOADING SYSTEM FROM FELSOMAT. EQUIPPED WITH:
- CNC CONTROL FANUC 160-T MODEL C
- CHUCK, TAILSTOCK, POWER OUTPUT DEVICE
- MARPOSS BALANCER E78
- DITTEL M 5000
- MARPOSS P 5 MEASURING INSTRUMENT FOR DIAMETER
- MEASURING PROBE FOR LENGTH DIMENSIONS
- SPINDLE WITH C-AXIS BY 180 ° TILTABLE AND ROTATABLE ABOUT B-AXIS 60°
- TWO AROBOTEC LUNETTES (DIA. 20-90MM)
- OIL MIST EXTRACTION SYSTEM LTA
- COOLING UNIT BY BKW
- BOSCH HYDRAULIC POWER PACK
- KNOLL PUMPS UNIT FOR CONNECTION TO CENTRAL COOLANT SYSTEM
- FIRE EXTINGUISHER AND PRESSURE RELIEF VALVE

TECHNICAL DATA OF THE FELSOMAT FILLER OF SYSTEM:
? YEAR OF CONSTRUCTION 2009
? BASKET LOADING WITH STACKING CELL
? SPC DRAWER
? GANTRY LOADER WITH GRAPPLE
? 90 ° CORNER CONVERTER
? SIEMENS 840 D CONTROL
? SYSTEM IS FULLY FUNCTIONAL

Ubicación: TECHNICAL DATA: -CAPACITY 6300 KG -TRACK WIDTH APPROX. 11250 MM -OPERATION VIA HAND REMOTE SWITCH -HACKING WAY APPROX. 6000 MM -REEVING 4 / 1 -HEIGHT APPROX. 750 MM -WHEELBASE APPROX. 2000 MM -DRIVING BEAM LENGTH APPROX. 2500 MM -TRACK BAR 50 MM - SPEED -TROLLEY GEAR APPROX. 20 M / MIN + 5 M / MIN -HOIST AROUND 4 M / MIN + 0,6 M / MIN -CRANE CHASSIS APPROX. 40 M / MIN + 10 M / MIN -CRANE WEIGHT - APPROX. 4000 KG

Ubicación: ; MILEAGE [KM]: 126256; GROSS WEIGHT [KG]: 36000; REGISTRATION NUMBER: W093730007EL05434; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; LIFT HEIGHT[MM]: 3400; MAXIMUM LIFT CAPACITY [KG]: 45000

Ubicación: PORTAL MILLING MACHINE LBV 3219 MANUFACTURER: LEADWELL YEAR: 2008 CNC FANUC... 21I - MB CLAMPING TABLE SURFACE... 3000 X 1700MM X AXIS... 3200MM DISTANCE BETWEEN STAND... 2000MM DISTANCE BETWEEN TABLE AND CROSSBAR... 220-970 / 1450MM Y AXIS... 1800MM Z AXIS... 750MM MAXIMUM TABLE LOAD... 10000KG SK 50 SPINDLE SPEED... 0-6000 RPM L X W X H... 7630 X 5400 X 4120MM THE WEIGHT OF THE MACHINE... 29000KG MAGAZINE PLACES... 24 TOTAL POWER CONSUMPTION... 45KVA IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.

Ubicación: CORE DRILLING DIAMETER MAX.: 30 MM
BORE DEPTH: 1.000 MM
SWING DIAMETER: 330 MM
TURNING SPEEDS: MAX. 6000 U/MIN
FEED STEPLESS: 20 - 200 MM/MIN
RAPID TRAVERSE: 2.000 MM/MIN
TOTAL POWER REQUIREMENT: 20 KW
WEIGHT OF THE MACHINE CA.: 4 T
DIMENSIONS OF THE MACHINE CA.: 3,6 X 1,3 M X 1,55 M M
- RETROFIT AND EQUIPPED WITH NEW ELECTRICS APPROX. IN 2004
- EXECUTION: TURNING TOOL - FIXED WORKPIECE

MANY ACCESSORIES
- CABINET WITH GUN DRILLS AND GUIDE BUSHES
- DOCUMENTATION

Ubicación: AXA VERTICAL - HORIZONTAL 2-1760-M-5 BJ. 2003 / 5 AXES / XYZ BAZ MOD VHC: 1760-600 - 800 / TABLE 1500 X 600 / ROTARY TABLE INTEGRATED 44 SEATS (2 X 22) / CNC HEIDENHAIN 600 / MAGAZINE Ã? MOD TNC 530 / SPEED 100-15,000 U MIN / 40 M-MIN. 3 D PROBES AND NEW SPINDLE MESSLINE AL IN X AXIS (22,000 EUROS) / SWIVEL HEAD IS A SIMULTANEOUS HEAD CONTINUOUSLY VARIABLE / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT AXA VERTICAL - HORIZONTAL MACHINING CENTER MOD VHC 2-1760-M-5 / YEAR 2003 / 5 AXES / XYZ: 1760-600 - 800 / TABLE 1500 X 600 / INTEGRATED TURN-TABLE Ã? 600 / MAGAZINE 44 TOOLS (2 X 22) / CNC HEIDENHAIN MOD. TNC 530 / SPEED 100-15,000 RPM. / 40 M-MIN. / 3 D TEST / NEW SPINDLE AND MEASURING RULER IN X AXIS (Â?¬ 22,000) / SWIVEL HEAD IS A SIMULTANEOUS HEAD STEPLESS / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT

Ubicación: FACEPLATE DIAMETER: 1400 MM
SWING DIAMETER: 1600 MM
TURNING HEIGHT: 1000 MM
CONTROL: SIEMENS 840 C
CROSS RAIL - ADJUSTMENT: 1000 MM
: 1300
TABLE RPM: 315 U/MIN.
WORKPIECE WEIGHT: 15000 KG
FEED RANGE: 0,1 - 2.000 MM/MIN
RAPID TRAVERSE: 6000 MM/MIN
SPINDLE MOTOR: 40/56 KW KW
CONNECTED LOAD: CA. 75 KVA
WEIGHT OF THE MACHINE CA.: 40 T
ACCESSORIES:
- 4 - NOS. CLAMPING VICES
- DIV. TOOL HOLDER AND CUTTING TOOLS CAPTO
- CHIP CONVEYOR
- KNOLL COOLANT DEVICE
- DOCUMENTATION

Ubicación: AXA VERTICAL - HORIZONTAL BAZ MOD. VHC 3-3000 M / 98 / XYZ: 3000 (1550 LEFT - 950 RIGHT) - 800 (UNTIL 870) - 800 (UP TO 1000) SK 40 CNC HEIDENHAIN TNC 430 / MAGAZINE 36 TOOLS / ROUND TABLE Ã? 1000 / HYDRAULIC UNIT / SWIVEL HEAD + 90° DIVISION 2.5 DEG / SPEED 100-10,000 U -MIN. / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT AXA VERTICAL - HORIZONTAL MACHINING CENTER MODEL VHC 3-3000 M / YEAR 98 / XYZ: 3000 (1550 LEFT - RIGHT 950) - 800 (UP TO 870) - 800 (UP TO 1000) / SK 40 CNC HEIDENHAIN TNC 430 / MAGAZINE 36 TOOLS / ROTARY TABLE Ã? 1000 / HYDRAULIC UNIT / SWIVEL HEAD-+ 90 ° PITCH 2.5 DEGREES / SPEEDS 100-10,000 RPM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT

Ubicación: WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2400 X 2200 MM
DESCRIPTION: MAXIMUM DIAMETER 500 MM. MINIMUM DIAMETER 30 MM. MINIMUM/MAXIMUM MODULE 2/10. HELICAL ANGLE 30º. GRINDING LENGTH 150 MM. NUMBER OF STROKES 35/200. MAXIMUM WORK-PIECE WEIGHT 300 KG

Ubicación: NOLL CAN LINE 4 - 1981 - 36,000 CPH - 150 & 250 ML SLIM CANS # MAKE DESCRIPTION OEM SERIAL NO. MODEL NO. 1 NOLL NOLL 2 DEPALLETIZER 812500 2 NOLL EMPTY CAN CONVEYOR SEN - 3 NOLL CAN RINSER - - 4 NOLL NOLL 2 FILLING MACHINE 3360031 AH-48 5 ANGELUS NOLL 2 SEAMER 10378481 61H 6 NOLL NOLL 2 MIXOMAT 3960229 S - GR - 12 A 7 ANTON PAAR ANTON PAAR ANALYZER S/N-MPDS2000V3 80670100 COBRIX 2 8 FILTEC FILLED CAN REJECTOR 113862, A - 10 - 2.5M-SS FT-50 9 NOLL FULL CAN CONVEYOR SEN - 10 NOLL CAN WARMER 781-2431 DS 6000 11 VIDEOJET DATE CODER 10 051081063 WD VIDEOJET 170I 12 KHS KISTER NOLL 2 KISTER PACKER 80.689 97/40 13 KHS KISTER SHRINK TUNNEL - 97/40 14 MARSH UNICORN TRAY CODER UP0591004 MARSH UNICORN 15 NOLL CASE CONVEYOR SEN - 16 NOLL NOLL 2 PALLETIZER 7812500 LORD VB 500K 17 CIMPACK PALLET TAG APPLICATOR S/N: GD12 21 8 174 CIMPACK 300 FOR FULL INFORMATION VISIT ABC.BEVERAGEXCHANGE.CO.UK

Ubicación: WEIGHT APPROX.: 20000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2300 X 2800 MM
DESCRIPTION: MAXIMUM DIAMETER WITH SUPPORT TAILSTOCK 1250 MM. MAXIMUM DIAMETER WITHOUT SUPPORT TAILSTOCK 1500 MM. MAXIMUM WIDE AXIAL 490 MM. MAXIMUM MODULE 14/18. TABLE DIAMETER 1020 MM. DOUBLE CYCLE OF WORKING. TOOTH BY TOOTH DIVISION. ELECTRONIC EQUIPMENT WITH PLC