28 ofertas

Año de construcción: usado
Ubicación: Land-333mw and 339mw gas turbine power plants(50hz)
(1) 333mw gas turbine power plant(50hz)
type: simple cycle type(there is no steam turbine)
capacity: 333mw
frequency: 50 hz
manufacturer: mitsubishi(japan)
manufacturing year: 2011
commissioning year: 2012
stop year: 2014
model: 701f4
fuel: dual type (gas or diesel)
heat efficiency: 41.9% lhv
lhv heat rate: 8592kj/kwh
8144btu/kwh
exaust flow: 748kg / s
inlet temperature: 1400 degree
exaust temperature: 630 degree
rated speed: 3000rpm
exaust nox: 25ppm@15%o2
exaust co: 10ppm@15%o2
turn down load: 45%
ramp rate: 38/min.
gas turbine size: osteo. (lwh) = 14.3 x 5.8 x 6.1 m
approx. weight: 415ton

(turbine)
type: axial flow type
lol of stages: 4
lol of rotor: 1
(compressor)
type: axial flow type
no.of stages: 17
no.of bleed: 3
(combustor)
type: multi-can-annular type
lol of combustor: 20
cooling type: air cooled
(2) 339mw gas turbine power plant(50hz)
type: simple cycle type(there is no steam turbine)
capacity: 339mw
frequency: 50 hz
manufacturer: mitsubishi(japan)
manufacturing year: 2011
commissioning year: 2012
stop year: 2015
model: 701f4
fuel: gas

heat efficiency: 41.9% lhv
lhv heat rate: 8592kj/kwh
8144btu/kwh
exaust flow: 748kg / s
inlet temperature: 1400 degree
exaust temperature: 630 degree
rated speed: 3000rpm
exaust nox: 25ppm@15%o2
exaust co: 10ppm@15%o2
turn down load: 45%
ramp rate: 38/min.
gas turbine size: osteo. (lwh) = 14.3 x 5.8 x 6.1 m
approx. weight: 415ton
(turbine)
type: axial flow type
lol of stages: 4
lol of rotor: 1
(compressor)
type: axial flow type
no.of stages: 17
no.of bleed: 3
(combustor)
type: multi-can-annular type
lol of combustor: 20
cooling type: air cooled 333MW AND 339MW GAS TURBINE POWER PLANTS(50HZ) (1) 333MW GAS TURBINE POWER PLANT(50HZ) TYPE: SIMPLE CYCLE TYPE(THERE IS NO STEAM TURBINE) CAPACITY: 333MW FREQUENCY: 50 HZ MANUFACTURER: MITSUBISHI(JAPAN) MANUFACTURING YEAR: 2011 COMMISSIONING YEAR: 2012 STOP YEAR: 2014 MODEL: 701F4 FUEL: DUAL TYPE (GAS OR DIESEL) HEAT EFFICIENCY: 41.9% LHV LHV HEAT RATE: 8592KJ/KWH 8144BTU/KWH EXAUST FLOW: 748KG / S INLET TEMPERATURE: 1400 DEGREE EXAUST TEMPERATURE: 630 DEGREE RATED SPEED: 3000RPM EXAUST NOX: 25PPM@15%O2 EXAUST CO: 10PPM@15%O2 TURN DOWN LOAD: 45% RAMP RATE: 38/MIN. GAS TURBINE SIZE: OSTEO. (LWH) = 14.3 X 5.8 X 6.1 M APPROX. WEIGHT: 415TON (TURBINE) TYPE: AXIAL FLOW TYPE LOL OF STAGES: 4 LOL OF ROTOR: 1 (COMPRESSOR) TYPE: AXIAL FLOW TYPE NO.OF STAGES: 17 NO.OF BLEED: 3 (COMBUSTOR) TYPE: MULTI-CAN-ANNULAR TYPE LOL OF COMBUSTOR: 20 COOLING TYPE: AIR COOLED (2) 339MW GAS TURBINE POWER PLANT(50HZ) TYPE: SIMPLE CYCLE TYPE(THERE IS NO STEAM TURBINE) CAPACITY: 339MW FREQUENCY: 50 HZ MANUFACTURER: MITSUBISHI(JAPAN) MANUFACTURING YEAR: 2011 COMMISSIONING YEAR: 2012 STOP YEAR: 2015 MODEL: 701F4 FUEL: GAS HEAT EFFICIENCY: 41.9% LHV LHV HEAT RATE: 8592KJ/KWH 8144BTU/KWH EXAUST FLOW: 748KG / S INLET TEMPERATURE: 1400 DEGREE EXAUST TEMPERATURE: 630 DEGREE RATED SPEED: 3000RPM EXAUST NOX: 25PPM@15%O2 EXAUST CO: 10PPM@15%O2 TURN DOWN LOAD: 45% RAMP RATE: 38/MIN. GAS TURBINE SIZE: OSTEO. (LWH) = 14.3 X 5.8 X 6.1 M APPROX. WEIGHT: 415TON (TURBINE) TYPE: AXIAL FLOW TYPE LOL OF STAGES: 4 LOL OF ROTOR: 1 (COMPRESSOR) TYPE: AXIAL FLOW TYPE NO.OF STAGES: 17 NO.OF BLEED: 3 (COMBUSTOR) TYPE: MULTI-CAN-ANNULAR TYPE LOL OF COMBUSTOR: 20 COOLING TYPE: AIR COOLED
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 180 mm<br/>gear width: 200 mm<br/>max. module: 3 <br/>control: bwo 785 <br/>max. cutter dia. spur gears: 180 mm<br/>max. cutter width spur gears: 200 mm<br/>min. number of teeth: 1 <br/>working spindle: din 2080 <br/>speeds infinitely variable range 1: 0 - 450 u/min<br/>speeds infinitely variable range 2: 400 - 3000 u/min<br/>tool adaptor: sk 30 <br/>max. milling cutter diameter: 80 mm<br/>cutter width - max.: 130 mm<br/>spindle stroke - max.: 100 mm<br/>spindle bore: 60 mm<br/>swivelability of the slide: +/- 45 °<br/>feed speeds of the slide: 0 - 3000 mm/min<br/>total power requirement: 20 kw<br/>weight of the machine ca.: 4,4 t<br/>equipment/accessories:<br/>- milling modes: radial, axial, tangential und combinations<br/>- milling head: type 2051<br/>- oil mist separator<br/>- total switch-off<br/>- deburring-worm gear<br/>- paper band filter<br/>- automatic orientation for skive hobbing<br/>- automatic workpiece loading <br/>- incl. cutter arbors + tapers 8 / 10 / 13 / 16 und 22<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 180 MM
GEAR WIDTH: 200 MM
MAX. MODULE: 3
CONTROL: BWO 785
MAX. CUTTER DIA. SPUR GEARS: 180 MM
MAX. CUTTER WIDTH SPUR GEARS: 200 MM
MIN. NUMBER OF TEETH: 1
WORKING SPINDLE: DIN 2080
SPEEDS INFINITELY VARIABLE RANGE 1: 0 - 450 U/MIN
SPEEDS INFINITELY VARIABLE RANGE 2: 400 - 3000 U/MIN
TOOL ADAPTOR: SK 30
MAX. MILLING CUTTER DIAMETER: 80 MM
CUTTER WIDTH - MAX.: 130 MM
SPINDLE STROKE - MAX.: 100 MM
SPINDLE BORE: 60 MM
SWIVELABILITY OF THE SLIDE: +/- 45 °
FEED SPEEDS OF THE SLIDE: 0 - 3000 MM/MIN
TOTAL POWER REQUIREMENT: 20 KW
WEIGHT OF THE MACHINE CA.: 4,4 T
EQUIPMENT/ACCESSORIES:
- MILLING MODES: RADIAL, AXIAL, TANGENTIAL UND COMBINATIONS
- MILLING HEAD: TYPE 2051
- OIL MIST SEPARATOR
- TOTAL SWITCH-OFF
- DEBURRING-WORM GEAR
- PAPER BAND FILTER
- AUTOMATIC ORIENTATION FOR SKIVE HOBBING
- AUTOMATIC WORKPIECE LOADING
- INCL. CUTTER ARBORS + TAPERS 8 / 10 / 13 / 16 UND 22




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Precio: 89.000 €
Ubicación: Land-technical parameters
maximum thickness of the rolled sheet metal 40 mm
working length of the rollers 3000 mm
maximum pre bending thickness  32 mm
number of driven rolls 3 pcs
the diameter of the roller no. 1 450 mm
the diameter of the roller no. 2 410 mm
the diameter of the roller no. 3 410 mm
machine weight 19 t

equipment
-digital position readouts.
-hardening treatment of the 3 rolls.
-conical hydraulic bending attachment.
-3 rolls driven hydraulic motorized with independent axial gear box on each roll.
-nr. 1 lateral support 2 ton capacity is included with the machine (not shown on the picture )  TECHNICAL PARAMETERS MAXIMUM THICKNESS OF THE ROLLED SHEET METAL 40 MM WORKING LENGTH OF THE ROLLERS 3000 MM MAXIMUM PRE BENDING THICKNESS 32 MM NUMBER OF DRIVEN ROLLS 3 PCS THE DIAMETER OF THE ROLLER NO. 1 450 MM THE DIAMETER OF THE ROLLER NO. 2 410 MM THE DIAMETER OF THE ROLLER NO. 3 410 MM MACHINE WEIGHT 19 T EQUIPMENT -DIGITAL POSITION READOUTS. -HARDENING TREATMENT OF THE 3 ROLLS. -CONICAL HYDRAULIC BENDING ATTACHMENT. -3 ROLLS DRIVEN HYDRAULIC MOTORIZED WITH INDEPENDENT AXIAL GEAR BOX ON EACH ROLL. -NR. 1 LATERAL SUPPORT 2 TON CAPACITY IS INCLUDED WITH THE MACHINE (NOT SHOWN ON THE PICTURE )
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Precio: 90.000 €
Ubicación: Land-tenoning spindle: 2 st.<br/>number of milling agregates: 6 st.<br/>spindle diameter: 50 mm<br/>! machine can be inspected during production !<br/><br/>! machine for sale in customer orders !<br/><br/># 6192 weinig unicontrol 12 cnc, with 2 tenoning spindles and vario table<br/>.................................................. ....<br/><br/>specifications summary<br/>(possibly more included equpment please inquire)<br/>.................................................. ....<br/><br/><br/>cut-off saw<br/>.................................................. ....<br/>cut-off saw electronically, horizontally adjustable: nc axis<br/>number of tools: 1 pcs.<br/>spindle speed: 3000-6000 r / min<br/>spindle diameter: 40 mm<br/>tool clamping length: 13 mm<br/>tool diameter max .: 400 mm<br/>motor power: 3 kw<br/>alignment laser for detecting the cut<br/>displacement axial: nc-axis integrated into control<br/>displacement axial: 150 mm<br/><br/>aggregate for edge rounding of the bottom<br/>.................................................. ....<br/>axial adjustment along with ablängsäge<br/>spindle speed: 9000 u / min<br/>spindle diameter: 20 mm<br/>tool clamping length: 25 mm<br/>tool diameter max .: 130 mm<br/>motor power: 3 kw<br/><br/>length stop cnc controlled<br/>.................................................. ....<br/>length 3500 mm<br/>incl. positioned cut-off saw integrated into control<br/><br/>1st tenoning spindle<br/>.................................................. ....<br/>number of tools: variable, cnc-axis<br/>spindle length: 640 mm<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle speed: 2800 u / min<br/>spindle diameter: 50 mm<br/>tool diameter max .: 380 mm<br/>engine power: 15 kw<br/>with hydraulic tensioned outboard bearing<br/>complete counterprofile: complete spindle length is countered<br/><br/><br/>2. tenoning spindle<br/>.................................................. ....<br/>number of tools: variable, cnc-axis<br/>spindle length: 640 mm<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle speed: 2800 u / min<br/>spindle diameter: 50 mm<br/>tool diameter max .: 380 mm<br/>engine power: 15 kw<br/>with hydraulic tensioned outboard bearing<br/>complete counterprofile: complete spindle length is countered<br/><br/><br/>vario table with horizontal nc-axis<br/><br/><br/>1. profiling spindle<br/>.................................................. ....<br/>position: right<br/>number of tools: variable, cnc-axis<br/>spindle length: 400 mm with counter bearing<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle horizontal: variable, cnc-axis<br/>spindle speed: 7000 u / min<br/>spindle diameter: 50 mm<br/>tooling circle max .: 232 mm<br/>engine power: 11 kw<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/>2. profiling spindle<br/>.................................................. ....<br/>position: right<br/>number of tools: variable, cnc-axis<br/>spindle length: 400 mm with counter bearing<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle horizontal: variable, cnc-axis<br/>spindle speed: 7000 u / min<br/>spindle diameter: 50 mm<br/>tooling circle max .: 232 mm<br/>engine power: 11 kw<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/>grooving aggregate from above - before the final profile spindle<br/>.................................................. ....<br/>position: horizontal top<br/>spindle speed: 9000 u / min<br/>spindle diameter: 40 mm<br/>spindle length: 40 mm<br/>engine power: 3.7 kw<br/>displacement axial: 30mm<br/>displacement radial: 125 mm<br/>radial clock to 8 positions by pneumatic gun<br/>axial adjustment with nc-axis<br/><br/><br/>3. profiling spindle  <br/>.................................................. ....<br/>position: right<br/>number of tools: variable, cnc-axis<br/>spindle length: 400 mm with counter bearing<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle horizontal: variable, cnc-axis<br/>spindle speed: 6000 u / min<br/>spindle diameter: 50 mm<br/>tooling circle max .: 232 mm<br/>engine power: 11 kw<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/><br/>profiling spindle - fitting spindle - at the machine end<br/>.................................................. ....<br/>position: vertical right up<br/>spindle length: 160 mm<br/>spindle speed: 5850 u / min<br/>spindle diameter: 40 mm<br/>tooling circle max .: 210 mm<br/>engine power: 3.7 kw<br/>displacement axial: 115 mm<br/>displacement radial: 100 mm<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/>grooving aggregate from top - in addition stand<br/>.................................................. <br/>position: vertical right<br/>spindle length: 40 mm<br/>spindle speed: 5850 u / min<br/>spindle diameter: 40 mm<br/>tooling circle max .: 180 mm<br/>motor power: 3 kw<br/>displacement axial: 100 mm<br/>displacement radial: 80 mm<br/>radial clocked to 8 positions by pneumatic gun<br/>axial clocked to 8 positions by pneumatic gun<br/><br/>grooving aggregate from bottom side - in addition stand<br/>.................................................. ....<br/>position: horizontal bottom<br/>spindle length: 125 mm                  <br/>spindle speed: 5850 u / min<br/>spindle diameter: 40 mm<br/>tooling circle max .: 200 mm<br/>motor power: 3 kw<br/>displacement axial: 100 mm<br/>displacement radial: 100 mm<br/>radial adjustment infinitely variable nc axis<br/>axial clocked to 8 positions by pneumatic gun<br/><br/>         <br/>other features<br/>.................................................. ....<br/><br/>online-capable<br/>equipment for stormproofing of already pressed sashes.<br/>that means on the machine you can do the outside profiles on single pieces or<br/>in pressed condition<br/>double piece package<br/>return conveyor for 1-man operation: turning system with collet<br/>studio window equipment<br/>electronic angle display for angular windows<br/>control: pc-nexus<br/>nc-axis for feed height adjustment<br/>2 axially clocked feed rollers opposite profile spindle for manufacturing<br/>narrow and short parts<br/>rung leadership and shoot supports bar<br/>pressure lineal from side is divided in sections<br/>automatic central lubrication<br/>vario table with horizontal nc-axis<br/><br/><br/>option:<br/>used oertli tools in different systems for single part production (that means <br/>customer did the outide profile of the sahes on the single piece)<br/><br/><br/>techn. details according to manufacturer - without guarantee!<br/><br/><br/><br/><br/> TENONING SPINDLE: 2 ST.
NUMBER OF MILLING AGREGATES: 6 ST.
SPINDLE DIAMETER: 50 MM
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! MACHINE FOR SALE IN CUSTOMER ORDERS !

# 6192 WEINIG UNICONTROL 12 CNC, WITH 2 TENONING SPINDLES AND VARIO TABLE
.................................................. ....

SPECIFICATIONS SUMMARY
(POSSIBLY MORE INCLUDED EQUPMENT PLEASE INQUIRE)
.................................................. ....


CUT-OFF SAW
.................................................. ....
CUT-OFF SAW ELECTRONICALLY, HORIZONTALLY ADJUSTABLE: NC AXIS
NUMBER OF TOOLS: 1 PCS.
SPINDLE SPEED: 3000-6000 R / MIN
SPINDLE DIAMETER: 40 MM
TOOL CLAMPING LENGTH: 13 MM
TOOL DIAMETER MAX .: 400 MM
MOTOR POWER: 3 KW
ALIGNMENT LASER FOR DETECTING THE CUT
DISPLACEMENT AXIAL: NC-AXIS INTEGRATED INTO CONTROL
DISPLACEMENT AXIAL: 150 MM

AGGREGATE FOR EDGE ROUNDING OF THE BOTTOM
.................................................. ....
AXIAL ADJUSTMENT ALONG WITH ABLäNGSäGE
SPINDLE SPEED: 9000 U / MIN
SPINDLE DIAMETER: 20 MM
TOOL CLAMPING LENGTH: 25 MM
TOOL DIAMETER MAX .: 130 MM
MOTOR POWER: 3 KW

LENGTH STOP CNC CONTROLLED
.................................................. ....
LENGTH 3500 MM
INCL. POSITIONED CUT-OFF SAW INTEGRATED INTO CONTROL

1ST TENONING SPINDLE
.................................................. ....
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 640 MM
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 2800 U / MIN
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 380 MM
ENGINE POWER: 15 KW
WITH HYDRAULIC TENSIONED OUTBOARD BEARING
COMPLETE COUNTERPROFILE: COMPLETE SPINDLE LENGTH IS COUNTERED


2. TENONING SPINDLE
.................................................. ....
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 640 MM
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 2800 U / MIN
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 380 MM
ENGINE POWER: 15 KW
WITH HYDRAULIC TENSIONED OUTBOARD BEARING
COMPLETE COUNTERPROFILE: COMPLETE SPINDLE LENGTH IS COUNTERED


VARIO TABLE WITH HORIZONTAL NC-AXIS


1. PROFILING SPINDLE
.................................................. ....
POSITION: RIGHT
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 400 MM WITH COUNTER BEARING
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE HORIZONTAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 7000 U / MIN
SPINDLE DIAMETER: 50 MM
TOOLING CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS

2. PROFILING SPINDLE
.................................................. ....
POSITION: RIGHT
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 400 MM WITH COUNTER BEARING
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE HORIZONTAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 7000 U / MIN
SPINDLE DIAMETER: 50 MM
TOOLING CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS

GROOVING AGGREGATE FROM ABOVE - BEFORE THE FINAL PROFILE SPINDLE
.................................................. ....
POSITION: HORIZONTAL TOP
SPINDLE SPEED: 9000 U / MIN
SPINDLE DIAMETER: 40 MM
SPINDLE LENGTH: 40 MM
ENGINE POWER: 3.7 KW
DISPLACEMENT AXIAL: 30MM
DISPLACEMENT RADIAL: 125 MM
RADIAL CLOCK TO 8 POSITIONS BY PNEUMATIC GUN
AXIAL ADJUSTMENT WITH NC-AXIS


3. PROFILING SPINDLE
.................................................. ....
POSITION: RIGHT
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 400 MM WITH COUNTER BEARING
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE HORIZONTAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 6000 U / MIN
SPINDLE DIAMETER: 50 MM
TOOLING CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS


PROFILING SPINDLE - FITTING SPINDLE - AT THE MACHINE END
.................................................. ....
POSITION: VERTICAL RIGHT UP
SPINDLE LENGTH: 160 MM
SPINDLE SPEED: 5850 U / MIN
SPINDLE DIAMETER: 40 MM
TOOLING CIRCLE MAX .: 210 MM
ENGINE POWER: 3.7 KW
DISPLACEMENT AXIAL: 115 MM
DISPLACEMENT RADIAL: 100 MM
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS

GROOVING AGGREGATE FROM TOP - IN ADDITION STAND
..................................................
POSITION: VERTICAL RIGHT
SPINDLE LENGTH: 40 MM
SPINDLE SPEED: 5850 U / MIN
SPINDLE DIAMETER: 40 MM
TOOLING CIRCLE MAX .: 180 MM
MOTOR POWER: 3 KW
DISPLACEMENT AXIAL: 100 MM
DISPLACEMENT RADIAL: 80 MM
RADIAL CLOCKED TO 8 POSITIONS BY PNEUMATIC GUN
AXIAL CLOCKED TO 8 POSITIONS BY PNEUMATIC GUN

GROOVING AGGREGATE FROM BOTTOM SIDE - IN ADDITION STAND
.................................................. ....
POSITION: HORIZONTAL BOTTOM
SPINDLE LENGTH: 125 MM
SPINDLE SPEED: 5850 U / MIN
SPINDLE DIAMETER: 40 MM
TOOLING CIRCLE MAX .: 200 MM
MOTOR POWER: 3 KW
DISPLACEMENT AXIAL: 100 MM
DISPLACEMENT RADIAL: 100 MM
RADIAL ADJUSTMENT INFINITELY VARIABLE NC AXIS
AXIAL CLOCKED TO 8 POSITIONS BY PNEUMATIC GUN


OTHER FEATURES
.................................................. ....

ONLINE-CAPABLE
EQUIPMENT FOR STORMPROOFING OF ALREADY PRESSED SASHES.
THAT MEANS ON THE MACHINE YOU CAN DO THE OUTSIDE PROFILES ON SINGLE PIECES OR
IN PRESSED CONDITION
DOUBLE PIECE PACKAGE
RETURN CONVEYOR FOR 1-MAN OPERATION: TURNING SYSTEM WITH COLLET
STUDIO WINDOW EQUIPMENT
ELECTRONIC ANGLE DISPLAY FOR ANGULAR WINDOWS
CONTROL: PC-NEXUS
NC-AXIS FOR FEED HEIGHT ADJUSTMENT
2 AXIALLY CLOCKED FEED ROLLERS OPPOSITE PROFILE SPINDLE FOR MANUFACTURING
NARROW AND SHORT PARTS
RUNG LEADERSHIP AND SHOOT SUPPORTS BAR
PRESSURE LINEAL FROM SIDE IS DIVIDED IN SECTIONS
AUTOMATIC CENTRAL LUBRICATION
VARIO TABLE WITH HORIZONTAL NC-AXIS


OPTION:
USED OERTLI TOOLS IN DIFFERENT SYSTEMS FOR SINGLE PART PRODUCTION (THAT MEANS
CUSTOMER DID THE OUTIDE PROFILE OF THE SAHES ON THE SINGLE PIECE)


TECHN. DETAILS ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-coperating hours approx.: 35000	
control system:	
heidenhain manualplus 4110	
turning over bed: 400 mm	
turning over carriage: 230 mm	
turning length: 800 mm	
spindle bore: 64 mm	
speed range: 1-3000 rpm	
feed range plan:	
u 0.001-1000 mm	
accessories:	
chuck	
steady rest	
tailstock	
tool holder multifix b	
2 pieces driven tools (radial + axial)	
turret	
availability: 01.01.19 COPERATING HOURS APPROX.: 35000 CONTROL SYSTEM: HEIDENHAIN MANUALPLUS 4110 TURNING OVER BED: 400 MM TURNING OVER CARRIAGE: 230 MM TURNING LENGTH: 800 MM SPINDLE BORE: 64 MM SPEED RANGE: 1-3000 RPM FEED RANGE PLAN: U 0.001-1000 MM ACCESSORIES: CHUCK STEADY REST TAILSTOCK TOOL HOLDER MULTIFIX B 2 PIECES DRIVEN TOOLS (RADIAL + AXIAL) TURRET AVAILABILITY: 01.01.19
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1711</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>lasercell 1005</td> </tr> <tr> <td>year:</td> <td>2005</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 750 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>72.024h / 24.547h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>50 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>8100 mm</td> </tr> <tr> <td>width:</td> <td>9200 mm</td> </tr> <tr> <td>height:</td> <td>3500 mm</td> </tr> <tr> <td>weight:</td> <td> </td> </tr> </tbody> </table> <br> <strong>standard configuration</strong> </h3>\n<strong> </strong> \n<strong> </strong> </h3> <strong>machine</strong>\n</h3>\n	<ul>\n	<li> </h3>travel: x-axis: 3000 mm, y-axis 1500 mm, z-axis750 mm</li>\n	<li>equipped for processing laser cutting and laser welding</li>\n	<li>connected value: 400 v/ 50 hz, iec standard</li>\n	<li>teach panel and complete teach software</li>\n	<li>automatic focus adjustment autolas plus</li>\n	<li>higher positioning of the machine body for two-station-operation</li>\n</ul>\n \n<strong>laser </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>laser unit: co2 - laser tlf 4000 small (compact) design, chiller with laserpac</li>\n	<li>logbook function, power cycles, laser power control, analog frequency modulation</li>\n	<li>targeting laser concentrical to the laser beam </li>\n</ul>\n \n<strong> </strong> </h3> <strong>focusing optics </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>1 high pressure cutting optic, 5 lens</li>\n	<li>setting device</li>\n	<li>teach probe for cutting head </li>\n	<li>welding head with focal length f = 200 mm, protective gas coaxial</li>\n</ul>\n \n<strong> </strong> </h3> <strong>working stations </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>2 x 3d support table, stationary</li>\n	<li>support tables: dimension 1000 x 1000 m</li>\n	<li>working height 900 mm</li>\n	<li>mobile partition panel for two-station-operation</li>\n</ul>\n \n<strong> </strong> </h3> <strong>safety</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>compact dust extractor (filtering installation) with oversized material collector and spark arrester, capacitiy 2000 m³/h, 400 v/ 50 hz</li>\n	<li>automatically-controlled fire extinguisher for suction unit</li>\n	<li>safety cabin with manual front sliding door</li>\n</ul>\n \n<strong> </strong> </h3> <strong>control</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>control: based on siemens sinumerik 840d open control system</li>\n</ul>\n \n</h3> <strong>additional equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>rotary axis</li>\n</ul>\n<h3>note:</h3> in combination with the option two-station-operation the rotary axis is only mounted on the right station (seen from the operators position). there is no counter bearing installed due to the limited space.\n\n	<ul>\n	<li>network connection via teleservice</li>\n	<li>digital user interface</li>\n</ul> </h3>\n</h3> \n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LM-1711
MANUFACTURER: TRUMPF
TYPE: LASERCELL 1005
YEAR: 2005
WORKING AREA: 3000 X 1500 X 750 MM
LASER RATED OUTPUT: 4000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 72.024H / 24.547H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 15 MM
MAX. SHEET THICK./AI: 10 MM
MAX. SPEED: 50 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 8100 MM
WIDTH: 9200 MM
HEIGHT: 3500 MM
WEIGHT:

STANDARD CONFIGURATION \N \N MACHINE\N\N
    \N
  • TRAVEL: X-AXIS: 3000 MM, Y-AXIS 1500 MM, Z-AXIS750 MM
  • \N
  • EQUIPPED FOR PROCESSING LASER CUTTING AND LASER WELDING
  • \N
  • CONNECTED VALUE: 400 V/ 50 HZ, IEC STANDARD
  • \N
  • TEACH PANEL AND COMPLETE TEACH SOFTWARE
  • \N
  • AUTOMATIC FOCUS ADJUSTMENT AUTOLAS PLUS
  • \N
  • HIGHER POSITIONING OF THE MACHINE BODY FOR TWO-STATION-OPERATION
  • \N
\N \NLASER \N \N
    \N
  • LASER UNIT: CO2 - LASER TLF 4000 SMALL (COMPACT) DESIGN, CHILLER WITH LASERPAC
  • \N
  • LOGBOOK FUNCTION, POWER CYCLES, LASER POWER CONTROL, ANALOG FREQUENCY MODULATION
  • \N
  • TARGETING LASER CONCENTRICAL TO THE LASER BEAM
  • \N
\N \N FOCUSING OPTICS \N \N
    \N
  • 1 HIGH PRESSURE CUTTING OPTIC, 5 LENS
  • \N
  • SETTING DEVICE
  • \N
  • TEACH PROBE FOR CUTTING HEAD
  • \N
  • WELDING HEAD WITH FOCAL LENGTH F = 200 MM, PROTECTIVE GAS COAXIAL
  • \N
\N \N WORKING STATIONS \N \N
    \N
  • 2 X 3D SUPPORT TABLE, STATIONARY
  • \N
  • SUPPORT TABLES: DIMENSION 1000 X 1000 M
  • \N
  • WORKING HEIGHT 900 MM
  • \N
  • MOBILE PARTITION PANEL FOR TWO-STATION-OPERATION
  • \N
\N \N SAFETY\N \N
    \N
  • COMPACT DUST EXTRACTOR (FILTERING INSTALLATION) WITH OVERSIZED MATERIAL COLLECTOR AND SPARK ARRESTER, CAPACITIY 2000 M³/H, 400 V/ 50 HZ
  • \N
  • AUTOMATICALLY-CONTROLLED FIRE EXTINGUISHER FOR SUCTION UNIT
  • \N
  • SAFETY CABIN WITH MANUAL FRONT SLIDING DOOR
  • \N
\N \N CONTROL\N \N
    \N
  • CONTROL: BASED ON SIEMENS SINUMERIK 840D OPEN CONTROL SYSTEM
  • \N
\N \N ADDITIONAL EQUIPMENT \N \N \N
    \N
  • ROTARY AXIS
  • \N
\N

NOTE:

IN COMBINATION WITH THE OPTION TWO-STATION-OPERATION THE ROTARY AXIS IS ONLY MOUNTED ON THE RIGHT STATION (SEEN FROM THE OPERATORS POSITION). THERE IS NO COUNTER BEARING INSTALLED DUE TO THE LIMITED SPACE.\N\N
    \N
  • NETWORK CONNECTION VIA TELESERVICE
  • \N
  • DIGITAL USER INTERFACE
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: axial
model: phsb 123
application type: bending
machine type: bending machine
availability: immediately
construction year: 1998
location: spain
country of origin: spain

general data:
measurements width: 5000 mm
measurements depth: 2000 mm
measurements height: 3000 mm
machine weight: 8500 kg

main drive:
pressing force: 125 kn
bending length: 3000 mm

daylight: 950 mm
throat: 315 mm
main motor power: 9 kw

media:
main electronic connection: 380 v OVERVIEW: BRAND: AXIAL MODEL: PHSB 123 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 1998 LOCATION: SPAIN COUNTRY OF ORIGIN: SPAIN GENERAL DATA: MEASUREMENTS WIDTH: 5000 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 3000 MM MACHINE WEIGHT: 8500 KG MAIN DRIVE: PRESSING FORCE: 125 KN BENDING LENGTH: 3000 MM DAYLIGHT: 950 MM THROAT: 315 MM MAIN MOTOR POWER: 9 KW MEDIA: MAIN ELECTRONIC CONNECTION: 380 V
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 5 st.<br/>spindle diameter: 50 mm<br/>weinig unicontrol 6 with cnc spindles<br/>...................................<br/><br/>technical data summary<br/>(possibly additionally included accessories please inquire)<br/>...................................<br/><br/>cut saw<br/>...................................<br/>crosscut saw electronically, horizontally infinitely adjustable<br/>number of tools: 1 pcs.<br/>spindle speed: 3000-6000 rpm<br/>spindle diameter: 40 mm<br/>tool diameter max .: 400 mm<br/>motor power: 3 kw<br/>adjustment radial pneumatically controlled 8 positions<br/>e.g. for edge rounding from above<br/>laser straightening light for detecting the sawing section<br/><br/>rounding unit<br/>...................................<br/>position: horizontally below<br/>motor power: 1.5 kw<br/>spindle diameter: 20 mm<br/>spindle speed: 9000 rpm<br/>tool circle max .: 130 mm<br/><br/>length stop cnc controlled<br/>...................................<br/>length 3500 mm<br/>electronic length stop<br/><br/>1. tenoning spindle<br/>...................................<br/>number of tools: variable, infinitely adjustable, cnc<br/>tool clamping length: 320 mm<br/>spindle stroke vertical: variable, adjustment stepless, cnc<br/>spindle speed: 3500 rpm<br/>spindle diameter: 50 mm<br/>tool diameter max .: 320 mm<br/>motor power: 11 kw<br/><br/>1. profiling spindle (synchronous spindle)<br/>...................................<br/>position: vertical right<br/>number of tools: 1 pcs.<br/>tool clamping length: 120 mm<br/>spindle speed: 6000 rpm<br/>spindle diameter: 50 mm<br/>tool circle max .: 232 mm<br/>motor power: 7.5 kw<br/><br/>2. profiling spindle<br/>...................................<br/>position: vertical right<br/>number of tools: variable, infinitely adjustable, cnc<br/>tool clamping length: 320 mm<br/>spindle stroke vertical: variable, adjustment stepless, cnc<br/>spindle speed: 6000 rpm<br/>spindle diameter: 50 mm<br/>tool circle max .: 232 mm<br/>motor power: 11 kw<br/><br/>3. grooving unit from above horizontally<br/>...................................<br/>adjustment axial 30 mm, pneumatically clocked 8 positions<br/>adjustment radial 125 mm, pneumatically clocked 8 positions<br/>spindle diameter: 40 mm<br/>clamping length: 40 mm<br/>motor power: 3 kw<br/>speed: 9000 rpm<br/><br/>4. profiling spindle (fitting spindle)<br/>...................................<br/>tool clamping length: 160 mm<br/>adjustment axial 115 mm, pneumatically clocked 8 positions<br/>adjustment radial 100 mm, pneumatically clocked 8 positions<br/>spindle speed: 5850 rpm<br/>spindle diameter: 40 mm<br/>tool circle max .: 210 mm<br/>motor power: 3.8 kw<br/><br/>5. grooving spindle horizontally from below<br/>...................................<br/>clamping length: 125 mm<br/>spindle diameter: 40 mm<br/>motor power: 3 kw<br/>speed: 5850 rpm<br/>tool circle max. 200 mm<br/>travel axial 100 mm, pneumatically clocked 8 positions<br/>adjustment radial 100 mm, pneumatically clocked 8 positions<br/><br/><br/>other features<br/>...................................<br/><br/>online capability<br/>storm proofing package (outside profiling of already pressed sashes)<br/>double piece package<br/>return conveyor for one-man operation:<br/>screen control<br/>angular window means<br/>electronic angle display for slanted windows<br/>control: pc nexus<br/>weinig type production program<br/><br/><br/>option:<br/>gebr. tool set for window<br/>oertli iv 67/77/92 wood<br/>iv 67/77 wood aluminum windows<br/>iv 67/77 entrance doors<br/><br/>detailed technical description can be found in the adjacent<br/>pdf file!<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 5 ST.
SPINDLE DIAMETER: 50 MM
WEINIG UNICONTROL 6 WITH CNC SPINDLES
...................................

TECHNICAL DATA SUMMARY
(POSSIBLY ADDITIONALLY INCLUDED ACCESSORIES PLEASE INQUIRE)
...................................

CUT SAW
...................................
CROSSCUT SAW ELECTRONICALLY, HORIZONTALLY INFINITELY ADJUSTABLE
NUMBER OF TOOLS: 1 PCS.
SPINDLE SPEED: 3000-6000 RPM
SPINDLE DIAMETER: 40 MM
TOOL DIAMETER MAX .: 400 MM
MOTOR POWER: 3 KW
ADJUSTMENT RADIAL PNEUMATICALLY CONTROLLED 8 POSITIONS
E.G. FOR EDGE ROUNDING FROM ABOVE
LASER STRAIGHTENING LIGHT FOR DETECTING THE SAWING SECTION

ROUNDING UNIT
...................................
POSITION: HORIZONTALLY BELOW
MOTOR POWER: 1.5 KW
SPINDLE DIAMETER: 20 MM
SPINDLE SPEED: 9000 RPM
TOOL CIRCLE MAX .: 130 MM

LENGTH STOP CNC CONTROLLED
...................................
LENGTH 3500 MM
ELECTRONIC LENGTH STOP

1. TENONING SPINDLE
...................................
NUMBER OF TOOLS: VARIABLE, INFINITELY ADJUSTABLE, CNC
TOOL CLAMPING LENGTH: 320 MM
SPINDLE STROKE VERTICAL: VARIABLE, ADJUSTMENT STEPLESS, CNC
SPINDLE SPEED: 3500 RPM
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 320 MM
MOTOR POWER: 11 KW

1. PROFILING SPINDLE (SYNCHRONOUS SPINDLE)
...................................
POSITION: VERTICAL RIGHT
NUMBER OF TOOLS: 1 PCS.
TOOL CLAMPING LENGTH: 120 MM
SPINDLE SPEED: 6000 RPM
SPINDLE DIAMETER: 50 MM
TOOL CIRCLE MAX .: 232 MM
MOTOR POWER: 7.5 KW

2. PROFILING SPINDLE
...................................
POSITION: VERTICAL RIGHT
NUMBER OF TOOLS: VARIABLE, INFINITELY ADJUSTABLE, CNC
TOOL CLAMPING LENGTH: 320 MM
SPINDLE STROKE VERTICAL: VARIABLE, ADJUSTMENT STEPLESS, CNC
SPINDLE SPEED: 6000 RPM
SPINDLE DIAMETER: 50 MM
TOOL CIRCLE MAX .: 232 MM
MOTOR POWER: 11 KW

3. GROOVING UNIT FROM ABOVE HORIZONTALLY
...................................
ADJUSTMENT AXIAL 30 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 125 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
SPINDLE DIAMETER: 40 MM
CLAMPING LENGTH: 40 MM
MOTOR POWER: 3 KW
SPEED: 9000 RPM

4. PROFILING SPINDLE (FITTING SPINDLE)
...................................
TOOL CLAMPING LENGTH: 160 MM
ADJUSTMENT AXIAL 115 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
SPINDLE SPEED: 5850 RPM
SPINDLE DIAMETER: 40 MM
TOOL CIRCLE MAX .: 210 MM
MOTOR POWER: 3.8 KW

5. GROOVING SPINDLE HORIZONTALLY FROM BELOW
...................................
CLAMPING LENGTH: 125 MM
SPINDLE DIAMETER: 40 MM
MOTOR POWER: 3 KW
SPEED: 5850 RPM
TOOL CIRCLE MAX. 200 MM
TRAVEL AXIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS


OTHER FEATURES
...................................

ONLINE CAPABILITY
STORM PROOFING PACKAGE (OUTSIDE PROFILING OF ALREADY PRESSED SASHES)
DOUBLE PIECE PACKAGE
RETURN CONVEYOR FOR ONE-MAN OPERATION:
SCREEN CONTROL
ANGULAR WINDOW MEANS
ELECTRONIC ANGLE DISPLAY FOR SLANTED WINDOWS
CONTROL: PC NEXUS
WEINIG TYPE PRODUCTION PROGRAM


OPTION:
GEBR. TOOL SET FOR WINDOW
OERTLI IV 67/77/92 WOOD
IV 67/77 WOOD ALUMINUM WINDOWS
IV 67/77 ENTRANCE DOORS

DETAILED TECHNICAL DESCRIPTION CAN BE FOUND IN THE ADJACENT
PDF FILE!




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-scara robot toshiba th650a
 
toshiba th650a high-speed robot, arms length 650 mm, maximum capacity 10 kg

this scara robot was used only for testing and demonstration purposes, is so in fact as good as new!
clean room design, ip65

arm length
full length 650mm
first arm 300mm
second arm 350mm
range of motion
first axis ±160 °
second axis ±143 °
third axis (z-axis) 200mm (option: 400mm)
fourth axis (z-axial rotation) ±360 °
maximum speed
first axis 340 ° / s
second axis 600 ° / s
third axis (z-axis) 2050mm / s
fourth axis (z-axial rotation) 1700 ° / s
composite speed 7.52 m / s
standard cycle time
horizontal direction: 300 mm
vertical direction: 25 mm, reciprocating 0.31s 1 (with 2 kg weight)
load
maximum payload 10kg
allowable end moment 0. 1kg · m2 2
position repeatability
x, y (flat surface) ±0. 01mm
z axis (vertical) ±0. 01mm
fourth axis (z-axial rotation) ±0. 004 °
input signal for hand: 5 inputs, 4 outputs
air piping for hand: 6 x 4
position detection method: absolute encoder mode
total weight: approx. 52kg
robot controller cable: standard: 5m (optional: maximum 25 m)
controller: ts3000

1: horizontal 300mm, vertical 25mm, round-trip continuous operation is not possible beyond the effective load ratio.
2: acceleration/deceleration rates may be limited according to the motion pattern, load mass and amount of offset. SCARA ROBOT TOSHIBA TH650A TOSHIBA TH650A HIGH-SPEED ROBOT, ARMS LENGTH 650 MM, MAXIMUM CAPACITY 10 KG THIS SCARA ROBOT WAS USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES, IS SO IN FACT AS GOOD AS NEW! CLEAN ROOM DESIGN, IP65 ARM LENGTH FULL LENGTH 650MM FIRST ARM 300MM SECOND ARM 350MM RANGE OF MOTION FIRST AXIS ±160 ° SECOND AXIS ±143 ° THIRD AXIS (Z-AXIS) 200MM (OPTION: 400MM) FOURTH AXIS (Z-AXIAL ROTATION) ±360 ° MAXIMUM SPEED FIRST AXIS 340 ° / S SECOND AXIS 600 ° / S THIRD AXIS (Z-AXIS) 2050MM / S FOURTH AXIS (Z-AXIAL ROTATION) 1700 ° / S COMPOSITE SPEED 7.52 M / S STANDARD CYCLE TIME HORIZONTAL DIRECTION: 300 MM VERTICAL DIRECTION: 25 MM, RECIPROCATING 0.31S 1 (WITH 2 KG WEIGHT) LOAD MAXIMUM PAYLOAD 10KG ALLOWABLE END MOMENT 0. 1KG · M2 2 POSITION REPEATABILITY X, Y (FLAT SURFACE) ±0. 01MM Z AXIS (VERTICAL) ±0. 01MM FOURTH AXIS (Z-AXIAL ROTATION) ±0. 004 ° INPUT SIGNAL FOR HAND: 5 INPUTS, 4 OUTPUTS AIR PIPING FOR HAND: 6 X 4 POSITION DETECTION METHOD: ABSOLUTE ENCODER MODE TOTAL WEIGHT: APPROX. 52KG ROBOT CONTROLLER CABLE: STANDARD: 5M (OPTIONAL: MAXIMUM 25 M) CONTROLLER: TS3000 1: HORIZONTAL 300MM, VERTICAL 25MM, ROUND-TRIP CONTINUOUS OPERATION IS NOT POSSIBLE BEYOND THE EFFECTIVE LOAD RATIO. 2: ACCELERATION/DECELERATION RATES MAY BE LIMITED ACCORDING TO THE MOTION PATTERN, LOAD MASS AND AMOUNT OF OFFSET.
Vendedor: Stolle Verpackungstechnik
Año de construcción: usado
Ubicación: Land-x-travel: 17700 mm<br/>y-travel: 4755 mm<br/>z-travel: 800 mm<br/>milling width: 3450 mm<br/>distance table - vertical milling spindle: 3682 mm<br/>table height over floor: 500 mm<br/>spindle diameter in front bearing: 200 mm<br/>turning speed range: 12 - 450 u/min<br/>tool taper: iso 60 <br/>axial adjustment of the spindle slide: 800 mm<br/>creep feed: 5 und 50 mm/min<br/>feed stepless: 10 - 3000 mm/min<br/>cross adjustment of cross beam milling head: 4745 <br/>rapid traverse: 2 m/min<br/>creep feed: 3 und 30 mm/min<br/>feed stepless: 6 - 2000 mm/min<br/>rapid traverse: 2 m/min<br/>creep feed: 3 und 30 mm/min<br/>feed stepless: 6 - 2000 mm/min<br/>vertical adjustment of cross beam: 3682 mm<br/>rapid traverse: 1,5 m/min<br/>creep feed: 1,25 und 12,5 mm/min<br/>feed stepless: 5 - 1500 mm/min<br/>table-size: 17800x2800 mm<br/>column daylight: 3600 mm<br/>control: siemens 840 c <br/>table load: 50.000/100.000 kg<br/>drive of main spindle: 100 kw<br/>total power requirement: 170 kw<br/>weight of the machine ca.: 300 t<br/>dimensions of the machine ca.: 40 x 8,4x 8,6 m<br/>+ electrically renewed including cabinet, cabling and motors and equipped with <br/>a siemens 840 c in 1999.<br/>+ incl. 16 milling heads and misc.tools<br/><br/><br/><br/><br/> X-TRAVEL: 17700 MM
Y-TRAVEL: 4755 MM
Z-TRAVEL: 800 MM
MILLING WIDTH: 3450 MM
DISTANCE TABLE - VERTICAL MILLING SPINDLE: 3682 MM
TABLE HEIGHT OVER FLOOR: 500 MM
SPINDLE DIAMETER IN FRONT BEARING: 200 MM
TURNING SPEED RANGE: 12 - 450 U/MIN
TOOL TAPER: ISO 60
AXIAL ADJUSTMENT OF THE SPINDLE SLIDE: 800 MM
CREEP FEED: 5 UND 50 MM/MIN
FEED STEPLESS: 10 - 3000 MM/MIN
CROSS ADJUSTMENT OF CROSS BEAM MILLING HEAD: 4745
RAPID TRAVERSE: 2 M/MIN
CREEP FEED: 3 UND 30 MM/MIN
FEED STEPLESS: 6 - 2000 MM/MIN
RAPID TRAVERSE: 2 M/MIN
CREEP FEED: 3 UND 30 MM/MIN
FEED STEPLESS: 6 - 2000 MM/MIN
VERTICAL ADJUSTMENT OF CROSS BEAM: 3682 MM
RAPID TRAVERSE: 1,5 M/MIN
CREEP FEED: 1,25 UND 12,5 MM/MIN
FEED STEPLESS: 5 - 1500 MM/MIN
TABLE-SIZE: 17800X2800 MM
COLUMN DAYLIGHT: 3600 MM
CONTROL: SIEMENS 840 C
TABLE LOAD: 50.000/100.000 KG
DRIVE OF MAIN SPINDLE: 100 KW
TOTAL POWER REQUIREMENT: 170 KW
WEIGHT OF THE MACHINE CA.: 300 T
DIMENSIONS OF THE MACHINE CA.: 40 X 8,4X 8,6 M
+ ELECTRICALLY RENEWED INCLUDING CABINET, CABLING AND MOTORS AND EQUIPPED WITH
A SIEMENS 840 C IN 1999.
+ INCL. 16 MILLING HEADS AND MISC.TOOLS




Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Ubicación: Land-<b><u>this is a 120 tonne rail bound forging manipulator</b></u>
nominal carrying capacity	120.0 tonnes
tongs clamping moment	3,000.0 knm
peel rotating torque	325.0 knm

<b><u>tongs gripping range w/o jaw insert</b></u>:
max round diameter	2,000.0 mm
min round diameter	350.0 mm
max square	1,800.0 mm

<b><u>tongs gripping range with jaw insert</b></u>:
max round diameter	1,400.0 mm
min round diameter	350.0 mm
max square	1,270.0 mm

max tongs turning circle	3,740.0 mm
max tong center height above rails	 3,300.0 mm
min tong center height above rails 	1,800.0 mm
vertical stroke of tongs parallel to floor	1,500.0 mm
vertical adjustment of jaws (max) 	1,500.0 mm

<b><u>vertical tilting angle of tongs</b></u>:
up 	5°
down 5°

center rail distance 	6,300.0 mm

<b><u>overall dimensions</b></u>:
width, approx.	10.4 meters
height, approx.	8.4 meters
length, approx.	22.7 meters

side shift of jaws each side of center 	350.0 mm
slew of jaws to either side of center with limited side shift 	5°
longitudinal recoil distance max. 500 mm either side of datum	500.0 mm

<b><u>manipulator speeds carrying max ingot weight</b></u>:
long travel, forging (variable)	1 to 15 mtrs/min
long travel, positioning (variable)	2 to 30 mtrs/min
jaw rotate, either direction (variable)	1 to 12 rev/min

<b><u>speeds of various tong operations</b></u>:
lifting and lowering of tongs, complete stroke	90.0 mtrs/min
tilting of tongs, complete stroke	90.0 mtrs/min
side shifting of tongs, complete stroke	80.0 mtrs/min
clamping of tongs, complete stroke	70.0 mtrs/min

weight on rails approx (tonnes/tons)	 850.0 tonnes

<b><u>complete with</b></u>:
• siemens model s7 plc control system used with forging press operator panel
• (4) rexroth oil hydraulic variable displacement axial plunger type pumps
	rexroth oil hydraulic pumps rated at 130l/min
• (4) 55kw (74hp) 440v motors each driving a rexroth pump
• hydraulic system also includes (1) pilot pump and (2) boost pumps
• lubrication system 
• electrical system and controls 
   THIS IS A 120 TONNE RAIL BOUND FORGING MANIPULATOR NOMINAL CARRYING CAPACITY 120.0 TONNES TONGS CLAMPING MOMENT 3,000.0 KNM PEEL ROTATING TORQUE 325.0 KNM TONGS GRIPPING RANGE W/O JAW INSERT: MAX ROUND DIAMETER 2,000.0 MM MIN ROUND DIAMETER 350.0 MM MAX SQUARE 1,800.0 MM TONGS GRIPPING RANGE WITH JAW INSERT: MAX ROUND DIAMETER 1,400.0 MM MIN ROUND DIAMETER 350.0 MM MAX SQUARE 1,270.0 MM MAX TONGS TURNING CIRCLE 3,740.0 MM MAX TONG CENTER HEIGHT ABOVE RAILS 3,300.0 MM MIN TONG CENTER HEIGHT ABOVE RAILS 1,800.0 MM VERTICAL STROKE OF TONGS PARALLEL TO FLOOR 1,500.0 MM VERTICAL ADJUSTMENT OF JAWS (MAX) 1,500.0 MM VERTICAL TILTING ANGLE OF TONGS: UP 5° DOWN 5° CENTER RAIL DISTANCE 6,300.0 MM OVERALL DIMENSIONS: WIDTH, APPROX. 10.4 METERS HEIGHT, APPROX. 8.4 METERS LENGTH, APPROX. 22.7 METERS SIDE SHIFT OF JAWS EACH SIDE OF CENTER 350.0 MM SLEW OF JAWS TO EITHER SIDE OF CENTER WITH LIMITED SIDE SHIFT 5° LONGITUDINAL RECOIL DISTANCE MAX. 500 MM EITHER SIDE OF DATUM 500.0 MM MANIPULATOR SPEEDS CARRYING MAX INGOT WEIGHT: LONG TRAVEL, FORGING (VARIABLE) 1 TO 15 MTRS/MIN LONG TRAVEL, POSITIONING (VARIABLE) 2 TO 30 MTRS/MIN JAW ROTATE, EITHER DIRECTION (VARIABLE) 1 TO 12 REV/MIN SPEEDS OF VARIOUS TONG OPERATIONS: LIFTING AND LOWERING OF TONGS, COMPLETE STROKE 90.0 MTRS/MIN TILTING OF TONGS, COMPLETE STROKE 90.0 MTRS/MIN SIDE SHIFTING OF TONGS, COMPLETE STROKE 80.0 MTRS/MIN CLAMPING OF TONGS, COMPLETE STROKE 70.0 MTRS/MIN WEIGHT ON RAILS APPROX (TONNES/TONS) 850.0 TONNES COMPLETE WITH: • SIEMENS MODEL S7 PLC CONTROL SYSTEM USED WITH FORGING PRESS OPERATOR PANEL • (4) REXROTH OIL HYDRAULIC VARIABLE DISPLACEMENT AXIAL PLUNGER TYPE PUMPS REXROTH OIL HYDRAULIC PUMPS RATED AT 130L/MIN • (4) 55KW (74HP) 440V MOTORS EACH DRIVING A REXROTH PUMP • HYDRAULIC SYSTEM ALSO INCLUDES (1) PILOT PUMP AND (2) BOOST PUMPS • LUBRICATION SYSTEM • ELECTRICAL SYSTEM AND CONTROLS
Vendedor: TrueForge Global Machinery Corp.
Año de construcción: usado
Ubicación: Land-max. workpiece diameter: 500 mm<br/>threading length: 3000 mm<br/>max. module: 20 / 25 <br/>min. module: - <br/>max. wheel diameter: 500 mm<br/>min. wheel diameter: 50 mm<br/>hobbing length: 2800 mm<br/>number of teeth: 6 - 200 <br/>milling cutter diameter: 250 mm<br/>cutter length max.: 300 mm<br/>milling head speed: 10 - 103 u/min<br/>feeds axial: 0,2 - 575 mm/min<br/>radial feed: 0,36 - 7,1 mm/rev<br/>main gear-box motor: 18,5 kw<br/>max. angle of teeth: +/- 45 grad<br/>workpiece weight: 4000 kg<br/>distance between centres: 3200 mm<br/>center height over square guideway: 450 mm<br/>swing diameter max. over bed cover: 900 mm<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>total power requirement: 25 kw<br/>weight of the machine ca.: 27,1 t<br/>dimensions of the machine ca.: 7,6  x 2,8 x 2,1 m<br/>autom. horizontal gear-, pinion-, spline- and rotor milling /  hobbing machine <br/> for external spur and helical gears, spline shafts and herringbone gears <br/>(special order) etc.<br/>with :<br/>+ max. workpiece diameter 500 mm<br/>+  3-4 pcs. hob arbors<br/>+  set of change gears (approx. 48-54 pcs.)<br/>+  level blocks 12-15 pcs., 2 steadies,<br/>+  separate switch electrical cabinet and separate hydraulic unit<br/>+  handbooks in english and russia<br/><br/>2010 head partly rebuilt, in very nice condition<br/><br/><br/><br/><br/> MAX. WORKPIECE DIAMETER: 500 MM
THREADING LENGTH: 3000 MM
MAX. MODULE: 20 / 25
MIN. MODULE: -
MAX. WHEEL DIAMETER: 500 MM
MIN. WHEEL DIAMETER: 50 MM
HOBBING LENGTH: 2800 MM
NUMBER OF TEETH: 6 - 200
MILLING CUTTER DIAMETER: 250 MM
CUTTER LENGTH MAX.: 300 MM
MILLING HEAD SPEED: 10 - 103 U/MIN
FEEDS AXIAL: 0,2 - 575 MM/MIN
RADIAL FEED: 0,36 - 7,1 MM/REV
MAIN GEAR-BOX MOTOR: 18,5 KW
MAX. ANGLE OF TEETH: +/- 45 GRAD
WORKPIECE WEIGHT: 4000 KG
DISTANCE BETWEEN CENTRES: 3200 MM
CENTER HEIGHT OVER SQUARE GUIDEWAY: 450 MM
SWING DIAMETER MAX. OVER BED COVER: 900 MM
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
TOTAL POWER REQUIREMENT: 25 KW
WEIGHT OF THE MACHINE CA.: 27,1 T
DIMENSIONS OF THE MACHINE CA.: 7,6 X 2,8 X 2,1 M
AUTOM. HORIZONTAL GEAR-, PINION-, SPLINE- AND ROTOR MILLING / HOBBING MACHINE
FOR EXTERNAL SPUR AND HELICAL GEARS, SPLINE SHAFTS AND HERRINGBONE GEARS
(SPECIAL ORDER) ETC.
WITH :
+ MAX. WORKPIECE DIAMETER 500 MM
+ 3-4 PCS. HOB ARBORS
+ SET OF CHANGE GEARS (APPROX. 48-54 PCS.)
+ LEVEL BLOCKS 12-15 PCS., 2 STEADIES,
+ SEPARATE SWITCH ELECTRICAL CABINET AND SEPARATE HYDRAULIC UNIT
+ HANDBOOKS IN ENGLISH AND RUSSIA

2010 HEAD PARTLY REBUILT, IN VERY NICE CONDITION




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-veb werkzeugmaschinenfabrik union gera
boring machine union
type bft 130/5
spindle diameter: 130 mm
tool mounting taper: isa 50/metr. 80

routes:
x cross adjustment of the plan slide: 320 mm
z axial adjustment of the drilling spindle: 1000 mm
y vertical adjustment of spindle stick: 1600/2000/2500 mm
  vertical adjustment of the set stock camp: 1600/200 mm
w longitudinal adjustment of table: 1250/1800 mm
             (spindle direction): 2000/2500 mm
x cross adjustment of the slide of the plan: 1600/2240/2800 mm
u radial adjustment of the plan slide: 320 mm

clamping surface of the table: 1400 x 1600 mm
			    1800 x 2000 mm

weight: approx. 30000 kg

machine is currently still closed, no use. machine is fully functional. machine is in good condition. we love to hear from you. VEB WERKZEUGMASCHINENFABRIK UNION GERA BORING MACHINE UNION TYPE BFT 130/5 SPINDLE DIAMETER: 130 MM TOOL MOUNTING TAPER: ISA 50/METR. 80 ROUTES: X CROSS ADJUSTMENT OF THE PLAN SLIDE: 320 MM Z AXIAL ADJUSTMENT OF THE DRILLING SPINDLE: 1000 MM Y VERTICAL ADJUSTMENT OF SPINDLE STICK: 1600/2000/2500 MM VERTICAL ADJUSTMENT OF THE SET STOCK CAMP: 1600/200 MM W LONGITUDINAL ADJUSTMENT OF TABLE: 1250/1800 MM (SPINDLE DIRECTION): 2000/2500 MM X CROSS ADJUSTMENT OF THE SLIDE OF THE PLAN: 1600/2240/2800 MM U RADIAL ADJUSTMENT OF THE PLAN SLIDE: 320 MM CLAMPING SURFACE OF THE TABLE: 1400 X 1600 MM 1800 X 2000 MM WEIGHT: APPROX. 30000 KG MACHINE IS CURRENTLY STILL CLOSED, NO USE. MACHINE IS FULLY FUNCTIONAL. MACHINE IS IN GOOD CONDITION. WE LOVE TO HEAR FROM YOU.
Vendedor: W&T EFRA
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1000 mm<br/>gear width: 800 mm<br/>max. module: 14/18 <br/>maximum axial offset: 800 mm<br/>table diameter: 710 mm<br/>table hole: 190 mm<br/>max. cutter diameter / length: 240 / 300 mm<br/>shifting: 250 mm<br/>milling drive motor: 31 kw<br/>hob turning speeds: 25 - 250 u/min<br/>milling tool taper: iso 50 <br/>feeds axial: 0,1 - 20 mm/wu<br/>tangential adjustment: 0,1 - 4 mm/wu<br/>radial feed: 0,1-4 mm/wu<br/>rapid travel x/y/z: 2000/3000/1000 mm/min<br/>screw size: 693 mm<br/>milling head -swivable +/-: 50 °<br/>diameter of hob: 240 mm<br/>cutter length max.: 300 mm<br/>total power requirement: 69 kw<br/>dimensions: 5,3 x 2,1 x 3,75 m<br/>weight of the machine ca.: 16 t<br/>distance hob- workpiece-axis: 40 - 610 mm<br/>the machine is designed for maximum performance and accuracy in flexible <br/>manufacturing, for example, spur gears, helical & double helical wheels, drive <br/>wheels for trucks and construction machinery, gears and sprockets for <br/>performance gear, storage, etc. the program covers about 100 workpiece <br/>programs. <br/>other features: <br/>- 6-axis cnc control, system mpst (metric & inches), freely programmable, fault <br/>diagnosis, help button <br/>- integrated electronic gear box (monitoring the synchronization of cutters and <br/>table turn) <br/>- cutter quick-change system <br/>- complete protection cabinet <br/>accessories: cutter arbors<br/><br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1000 MM
GEAR WIDTH: 800 MM
MAX. MODULE: 14/18
MAXIMUM AXIAL OFFSET: 800 MM
TABLE DIAMETER: 710 MM
TABLE HOLE: 190 MM
MAX. CUTTER DIAMETER / LENGTH: 240 / 300 MM
SHIFTING: 250 MM
MILLING DRIVE MOTOR: 31 KW
HOB TURNING SPEEDS: 25 - 250 U/MIN
MILLING TOOL TAPER: ISO 50
FEEDS AXIAL: 0,1 - 20 MM/WU
TANGENTIAL ADJUSTMENT: 0,1 - 4 MM/WU
RADIAL FEED: 0,1-4 MM/WU
RAPID TRAVEL X/Y/Z: 2000/3000/1000 MM/MIN
SCREW SIZE: 693 MM
MILLING HEAD -SWIVABLE +/-: 50 °
DIAMETER OF HOB: 240 MM
CUTTER LENGTH MAX.: 300 MM
TOTAL POWER REQUIREMENT: 69 KW
DIMENSIONS: 5,3 X 2,1 X 3,75 M
WEIGHT OF THE MACHINE CA.: 16 T
DISTANCE HOB- WORKPIECE-AXIS: 40 - 610 MM
THE MACHINE IS DESIGNED FOR MAXIMUM PERFORMANCE AND ACCURACY IN FLEXIBLE
MANUFACTURING, FOR EXAMPLE, SPUR GEARS, HELICAL & DOUBLE HELICAL WHEELS, DRIVE
WHEELS FOR TRUCKS AND CONSTRUCTION MACHINERY, GEARS AND SPROCKETS FOR
PERFORMANCE GEAR, STORAGE, ETC. THE PROGRAM COVERS ABOUT 100 WORKPIECE
PROGRAMS.
OTHER FEATURES:
- 6-AXIS CNC CONTROL, SYSTEM MPST (METRIC & INCHES), FREELY PROGRAMMABLE, FAULT
DIAGNOSIS, HELP BUTTON
- INTEGRATED ELECTRONIC GEAR BOX (MONITORING THE SYNCHRONIZATION OF CUTTERS AND
TABLE TURN)
- CUTTER QUICK-CHANGE SYSTEM
- COMPLETE PROTECTION CABINET
ACCESSORIES: CUTTER ARBORS






Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-bopp plant  x2 (biaxially oriented polypropylene film production lines)

(1st plant)

make:bruckner(germany)

manufacturing year:1989

capacity: 13,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-50 micron

film width(trimmed);6500mm

mechanical and thermal layout:

thickness 12 micron / speed 220m/min / output 927kg/h

thickness 20 micron / speed 200m/min / output 1404kg/h

thickness 25 micron / speed 170m/min / output 1492kg/h

thickness 30 micron / speed 165m/min / output 1737kg/h

thickness 40 micron / speed 110m/min / output 1544kg/h

thickness 50 micron / speed 85m/min / output 1492kg/h

stretch ratio:machine direction 1:1~ 1:6

transverse direction: 1:6~1:10

speed:max.300m/min

production speed: 220m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 2400kg/h)

b.dosinf for satellite extruder: 2sets)(150kg/h, 150kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm, 21 d, 880kw dc motor

-melting extruder:dia.225mm, 20d. 338kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.75mm,30d,59kw dc motor, max.output 100kg/h

c.polymer filter for main extruder

-type:long life filter , 19 candles

-filter area: approx. 1.4m2

-heating:thermal oil heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:43ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-ddia.2000mm width 1200mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:650-800mm

-max.stretching width:7500mm

-outlet width:6000-6900mm

-preheating zone: 3 m x 5zone 

-stretching zone; 3 m x4zone

-annealing zone: 3m x 4zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 125 kw dc motor

    

5.thickness gauge: kamma ray 

6.winder

-automatic turret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1000mm

7.slitter

make:atlas

max. speed: 600m/min

max. working width: 6600mm

max. diameter of mill roll on unwinder:1000mm

number of rewinder station;12

rewinding width: 300-3000mm

  
  (2nd plant)  

make:mitsubishi(japan)

manufacturing year:1993

capacity: 14,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-60 micron

film width(trimmed);6300mm

mechanical and thermal layout:

thickness 12 micron / speed 240m/min / output 980kg/h

thickness 20 micron / speed 220m/min / output 1497kg/h

thickness 25 micron / speed 195m/min / output 1658kg/h

thickness 30 micron / speed 180m/min / output 1837kg/h

thickness 40 micron / speed 120m/min / output 1633kg/h

thickness 50 micron / speed 90m/min / output 1531kg/h

stretch ratio:machine direction 1:1~ 1:10

transverse direction: 1:7~1:10

speed:max.320m/min

production speed: 240m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 4000kg/h)

b.dosinf for satellite extruder: 2sets)800kg/h, 500kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm,700kw dc motor

-melting extruder:dia.220mm,350kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.115mm,160kw dc motor, max.output 300kg/h

-dia.90mm,90kw dc motor, max.output 200kg/h

c.polymer filter for main extruder

-type:multi disc type filter, 12 pieces

-filter area: approx. 2m2

-heating:electric heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:29ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-dia.1000mm 1ea, dia.2000mm x2ea, width 1300mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:600-1000mm

-max.stretching width:7446mm

-outlet width:6000-6700mm

-preheating zone: 3 m x 4zone / 4.5m x 2zones

-stretching zone; 3 m x5zone

-annealing zone: 1m x 1zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 132 kw ac motor

   

5.thickness gauge: kamma ray 

6.winder

-automatic yurret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1200mm

7.slitter

make:kampf(germany)

max. speed: 1000m/min

max. working width: 6500mm

max. diameter of mill roll on unwinder:1200mm

number of rewinder station;14

rewinding width: 300-3000mm
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


  
  BOPP PLANT X2 (BIAXIALLY ORIENTED POLYPROPYLENE FILM PRODUCTION LINES) (1ST PLANT) MAKE:BRUCKNER(GERMANY) MANUFACTURING YEAR:1989 CAPACITY: 13,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-50 MICRON FILM WIDTH(TRIMMED);6500MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 220M/MIN / OUTPUT 927KG/H THICKNESS 20 MICRON / SPEED 200M/MIN / OUTPUT 1404KG/H THICKNESS 25 MICRON / SPEED 170M/MIN / OUTPUT 1492KG/H THICKNESS 30 MICRON / SPEED 165M/MIN / OUTPUT 1737KG/H THICKNESS 40 MICRON / SPEED 110M/MIN / OUTPUT 1544KG/H THICKNESS 50 MICRON / SPEED 85M/MIN / OUTPUT 1492KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:6 TRANSVERSE DIRECTION: 1:6~1:10 SPEED:MAX.300M/MIN PRODUCTION SPEED: 220M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 2400KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)(150KG/H, 150KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM, 21 D, 880KW DC MOTOR -MELTING EXTRUDER:DIA.225MM, 20D. 338KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.75MM,30D,59KW DC MOTOR, MAX.OUTPUT 100KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:LONG LIFE FILTER , 19 CANDLES -FILTER AREA: APPROX. 1.4M2 -HEATING:THERMAL OIL HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:43EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DDIA.2000MM WIDTH 1200MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:650-800MM -MAX.STRETCHING WIDTH:7500MM -OUTLET WIDTH:6000-6900MM -PREHEATING ZONE: 3 M X 5ZONE -STRETCHING ZONE; 3 M X4ZONE -ANNEALING ZONE: 3M X 4ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 125 KW DC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC TURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1000MM 7.SLITTER MAKE:ATLAS MAX. SPEED: 600M/MIN MAX. WORKING WIDTH: 6600MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1000MM NUMBER OF REWINDER STATION;12 REWINDING WIDTH: 300-3000MM (2ND PLANT) MAKE:MITSUBISHI(JAPAN) MANUFACTURING YEAR:1993 CAPACITY: 14,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-60 MICRON FILM WIDTH(TRIMMED);6300MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 240M/MIN / OUTPUT 980KG/H THICKNESS 20 MICRON / SPEED 220M/MIN / OUTPUT 1497KG/H THICKNESS 25 MICRON / SPEED 195M/MIN / OUTPUT 1658KG/H THICKNESS 30 MICRON / SPEED 180M/MIN / OUTPUT 1837KG/H THICKNESS 40 MICRON / SPEED 120M/MIN / OUTPUT 1633KG/H THICKNESS 50 MICRON / SPEED 90M/MIN / OUTPUT 1531KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:10 TRANSVERSE DIRECTION: 1:7~1:10 SPEED:MAX.320M/MIN PRODUCTION SPEED: 240M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 4000KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)800KG/H, 500KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM,700KW DC MOTOR -MELTING EXTRUDER:DIA.220MM,350KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.115MM,160KW DC MOTOR, MAX.OUTPUT 300KG/H -DIA.90MM,90KW DC MOTOR, MAX.OUTPUT 200KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:MULTI DISC TYPE FILTER, 12 PIECES -FILTER AREA: APPROX. 2M2 -HEATING:ELECTRIC HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:29EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DIA.1000MM 1EA, DIA.2000MM X2EA, WIDTH 1300MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:600-1000MM -MAX.STRETCHING WIDTH:7446MM -OUTLET WIDTH:6000-6700MM -PREHEATING ZONE: 3 M X 4ZONE / 4.5M X 2ZONES -STRETCHING ZONE; 3 M X5ZONE -ANNEALING ZONE: 1M X 1ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 132 KW AC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC YURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1200MM 7.SLITTER MAKE:KAMPF(GERMANY) MAX. SPEED: 1000M/MIN MAX. WORKING WIDTH: 6500MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1200MM NUMBER OF REWINDER STATION;14 REWINDING WIDTH: 300-3000MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 3000 mm<br/>gear width: 1200 mm<br/>max. module: 30 / 36 <br/>min. module: 2 <br/>table diameter: 2500 mm<br/>hob dia. - max.: 450 x 500 mm<br/>milling spindle speeds: 10 - 165 u/min<br/>hob length max.: 500 mm<br/>min. number of teeth: 20 <br/>tip circle diameter: 2050 mm<br/>tooth helical angle min/max: 0 - 45 °<br/>center distance betw. workpiece-tool min/max.: 150 - 1750 mm<br/>milling slide swivelling: 50 grad<br/>distance table / counter stay: 1050 - 2050 mm<br/>shifting: 300 mm<br/>workpiece weight: 40 t<br/>table bore diameter: 800 mm<br/>depth of hole: 1100 mm<br/>main drive motor: 37 kw<br/>table load capacity: 400 kn<br/>min. number of teeth: wälzfräsen 20 <br/>min. number of teeth: formfräsen 2 <br/>taper: mk 100 <br/>feeds axial: 1 - 1800 mm/min<br/>radial feed: 1 - 500 mm/min<br/>feed: tangential 1 - 450 mm/min<br/>rapid traverse: 1875 / 530 / 470 mm/min<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>control: siemens sinumerik 3m <br/>total power requirement: 125 kva<br/>weight of the machine ca.: 73 t<br/>dimensions of the machine ca.: 11,2 x 5,1 x 6,9 m<br/>gear hobbing machine ( rebuilt 2006 ) equipped with: <br/>- cnc continuous path control siemens sinumerik 3 m for 4 axis (a/y/x/z)<br/>with electronic hand wheel, with incremental measuring systems, digital <br/>position displays and integrated programmable control (sps).<br/>- siemens simodrive 611<br/>- automatic work cycles for axial, radial and tangential hobbing, crown/taper <br/>hobbing etc.<br/>- movable control panel<br/>- set of change gears for differential gear and indexing (approx. 115pcs)<br/>- max workpiece dia with outer steady 2000mm,<br/>- tailstock column with tailstockarm, steadyrest support, dia 290 / 625 mm,<br/>- chip conveyor<br/>- paperband filter<br/>- cooling unit<br/>- rexroth hydraulic<br/>- arbors (7)<br/>- levelling shoes (37)<br/>- automatic single indexing device      <br/><br/>2006 partl. rebuilt (e.g. new ball screw spindle with screw nut)<br/>in excellent working condition<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 3000 MM
GEAR WIDTH: 1200 MM
MAX. MODULE: 30 / 36
MIN. MODULE: 2
TABLE DIAMETER: 2500 MM
HOB DIA. - MAX.: 450 X 500 MM
MILLING SPINDLE SPEEDS: 10 - 165 U/MIN
HOB LENGTH MAX.: 500 MM
MIN. NUMBER OF TEETH: 20
TIP CIRCLE DIAMETER: 2050 MM
TOOTH HELICAL ANGLE MIN/MAX: 0 - 45 °
CENTER DISTANCE BETW. WORKPIECE-TOOL MIN/MAX.: 150 - 1750 MM
MILLING SLIDE SWIVELLING: 50 GRAD
DISTANCE TABLE / COUNTER STAY: 1050 - 2050 MM
SHIFTING: 300 MM
WORKPIECE WEIGHT: 40 T
TABLE BORE DIAMETER: 800 MM
DEPTH OF HOLE: 1100 MM
MAIN DRIVE MOTOR: 37 KW
TABLE LOAD CAPACITY: 400 KN
MIN. NUMBER OF TEETH: WäLZFRäSEN 20
MIN. NUMBER OF TEETH: FORMFRäSEN 2
TAPER: MK 100
FEEDS AXIAL: 1 - 1800 MM/MIN
RADIAL FEED: 1 - 500 MM/MIN
FEED: TANGENTIAL 1 - 450 MM/MIN
RAPID TRAVERSE: 1875 / 530 / 470 MM/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
CONTROL: SIEMENS SINUMERIK 3M
TOTAL POWER REQUIREMENT: 125 KVA
WEIGHT OF THE MACHINE CA.: 73 T
DIMENSIONS OF THE MACHINE CA.: 11,2 X 5,1 X 6,9 M
GEAR HOBBING MACHINE ( REBUILT 2006 ) EQUIPPED WITH:
- CNC CONTINUOUS PATH CONTROL SIEMENS SINUMERIK 3 M FOR 4 AXIS (A/Y/X/Z)
WITH ELECTRONIC HAND WHEEL, WITH INCREMENTAL MEASURING SYSTEMS, DIGITAL
POSITION DISPLAYS AND INTEGRATED PROGRAMMABLE CONTROL (SPS).
- SIEMENS SIMODRIVE 611
- AUTOMATIC WORK CYCLES FOR AXIAL, RADIAL AND TANGENTIAL HOBBING, CROWN/TAPER
HOBBING ETC.
- MOVABLE CONTROL PANEL
- SET OF CHANGE GEARS FOR DIFFERENTIAL GEAR AND INDEXING (APPROX. 115PCS)
- MAX WORKPIECE DIA WITH OUTER STEADY 2000MM,
- TAILSTOCK COLUMN WITH TAILSTOCKARM, STEADYREST SUPPORT, DIA 290 / 625 MM,
- CHIP CONVEYOR
- PAPERBAND FILTER
- COOLING UNIT
- REXROTH HYDRAULIC
- ARBORS (7)
- LEVELLING SHOES (37)
- AUTOMATIC SINGLE INDEXING DEVICE

2006 PARTL. REBUILT (E.G. NEW BALL SCREW SPINDLE WITH SCREW NUT)
IN EXCELLENT WORKING CONDITION




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-bopp plant  x2 (biaxially oriented polypropylene film production lines)

(1st plant)

make:bruckner(germany)

manufacturing year:1989

capacity: 13,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-50 micron

film width(trimmed);6500mm

mechanical and thermal layout:

thickness 12 micron / speed 220m/min / output 927kg/h

thickness 20 micron / speed 200m/min / output 1404kg/h

thickness 25 micron / speed 170m/min / output 1492kg/h

thickness 30 micron / speed 165m/min / output 1737kg/h

thickness 40 micron / speed 110m/min / output 1544kg/h

thickness 50 micron / speed 85m/min / output 1492kg/h

stretch ratio:machine direction 1:1~ 1:6

transverse direction: 1:6~1:10

speed:max.300m/min

production speed: 220m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 2400kg/h)

b.dosinf for satellite extruder: 2sets)(150kg/h, 150kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm, 21 d, 880kw dc motor

-melting extruder:dia.225mm, 20d. 338kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.75mm,30d,59kw dc motor, max.output 100kg/h

c.polymer filter for main extruder

-type:long life filter , 19 candles

-filter area: approx. 1.4m2

-heating:thermal oil heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:43ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-ddia.2000mm width 1200mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:650-800mm

-max.stretching width:7500mm

-outlet width:6000-6900mm

-preheating zone: 3 m x 5zone 

-stretching zone; 3 m x4zone

-annealing zone: 3m x 4zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 125 kw dc motor

    

5.thickness gauge: kamma ray 

6.winder

-automatic turret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1000mm

7.slitter

make:atlas

max. speed: 600m/min

max. working width: 6600mm

max. diameter of mill roll on unwinder:1000mm

number of rewinder station;12

rewinding width: 300-3000mm

  
  (2nd plant)  

make:mitsubishi(japan)

manufacturing year:1993

capacity: 14,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-60 micron

film width(trimmed);6300mm

mechanical and thermal layout:

thickness 12 micron / speed 240m/min / output 980kg/h

thickness 20 micron / speed 220m/min / output 1497kg/h

thickness 25 micron / speed 195m/min / output 1658kg/h

thickness 30 micron / speed 180m/min / output 1837kg/h

thickness 40 micron / speed 120m/min / output 1633kg/h

thickness 50 micron / speed 90m/min / output 1531kg/h

stretch ratio:machine direction 1:1~ 1:10

transverse direction: 1:7~1:10

speed:max.320m/min

production speed: 240m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 4000kg/h)

b.dosinf for satellite extruder: 2sets)800kg/h, 500kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm,700kw dc motor

-melting extruder:dia.220mm,350kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.115mm,160kw dc motor, max.output 300kg/h

-dia.90mm,90kw dc motor, max.output 200kg/h

c.polymer filter for main extruder

-type:multi disc type filter, 12 pieces

-filter area: approx. 2m2

-heating:electric heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:29ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-dia.1000mm 1ea, dia.2000mm x2ea, width 1300mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:600-1000mm

-max.stretching width:7446mm

-outlet width:6000-6700mm

-preheating zone: 3 m x 4zone / 4.5m x 2zones

-stretching zone; 3 m x5zone

-annealing zone: 1m x 1zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 132 kw ac motor

   

5.thickness gauge: kamma ray 

6.winder

-automatic yurret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1200mm

7.slitter

make:kampf(germany)

max. speed: 1000m/min

max. working width: 6500mm

max. diameter of mill roll on unwinder:1200mm

number of rewinder station;14

rewinding width: 300-3000mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


  
  BOPP PLANT X2 (BIAXIALLY ORIENTED POLYPROPYLENE FILM PRODUCTION LINES) (1ST PLANT) MAKE:BRUCKNER(GERMANY) MANUFACTURING YEAR:1989 CAPACITY: 13,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-50 MICRON FILM WIDTH(TRIMMED);6500MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 220M/MIN / OUTPUT 927KG/H THICKNESS 20 MICRON / SPEED 200M/MIN / OUTPUT 1404KG/H THICKNESS 25 MICRON / SPEED 170M/MIN / OUTPUT 1492KG/H THICKNESS 30 MICRON / SPEED 165M/MIN / OUTPUT 1737KG/H THICKNESS 40 MICRON / SPEED 110M/MIN / OUTPUT 1544KG/H THICKNESS 50 MICRON / SPEED 85M/MIN / OUTPUT 1492KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:6 TRANSVERSE DIRECTION: 1:6~1:10 SPEED:MAX.300M/MIN PRODUCTION SPEED: 220M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 2400KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)(150KG/H, 150KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM, 21 D, 880KW DC MOTOR -MELTING EXTRUDER:DIA.225MM, 20D. 338KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.75MM,30D,59KW DC MOTOR, MAX.OUTPUT 100KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:LONG LIFE FILTER , 19 CANDLES -FILTER AREA: APPROX. 1.4M2 -HEATING:THERMAL OIL HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:43EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DDIA.2000MM WIDTH 1200MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:650-800MM -MAX.STRETCHING WIDTH:7500MM -OUTLET WIDTH:6000-6900MM -PREHEATING ZONE: 3 M X 5ZONE -STRETCHING ZONE; 3 M X4ZONE -ANNEALING ZONE: 3M X 4ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 125 KW DC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC TURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1000MM 7.SLITTER MAKE:ATLAS MAX. SPEED: 600M/MIN MAX. WORKING WIDTH: 6600MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1000MM NUMBER OF REWINDER STATION;12 REWINDING WIDTH: 300-3000MM (2ND PLANT) MAKE:MITSUBISHI(JAPAN) MANUFACTURING YEAR:1993 CAPACITY: 14,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-60 MICRON FILM WIDTH(TRIMMED);6300MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 240M/MIN / OUTPUT 980KG/H THICKNESS 20 MICRON / SPEED 220M/MIN / OUTPUT 1497KG/H THICKNESS 25 MICRON / SPEED 195M/MIN / OUTPUT 1658KG/H THICKNESS 30 MICRON / SPEED 180M/MIN / OUTPUT 1837KG/H THICKNESS 40 MICRON / SPEED 120M/MIN / OUTPUT 1633KG/H THICKNESS 50 MICRON / SPEED 90M/MIN / OUTPUT 1531KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:10 TRANSVERSE DIRECTION: 1:7~1:10 SPEED:MAX.320M/MIN PRODUCTION SPEED: 240M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 4000KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)800KG/H, 500KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM,700KW DC MOTOR -MELTING EXTRUDER:DIA.220MM,350KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.115MM,160KW DC MOTOR, MAX.OUTPUT 300KG/H -DIA.90MM,90KW DC MOTOR, MAX.OUTPUT 200KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:MULTI DISC TYPE FILTER, 12 PIECES -FILTER AREA: APPROX. 2M2 -HEATING:ELECTRIC HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:29EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DIA.1000MM 1EA, DIA.2000MM X2EA, WIDTH 1300MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:600-1000MM -MAX.STRETCHING WIDTH:7446MM -OUTLET WIDTH:6000-6700MM -PREHEATING ZONE: 3 M X 4ZONE / 4.5M X 2ZONES -STRETCHING ZONE; 3 M X5ZONE -ANNEALING ZONE: 1M X 1ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 132 KW AC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC YURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1200MM 7.SLITTER MAKE:KAMPF(GERMANY) MAX. SPEED: 1000M/MIN MAX. WORKING WIDTH: 6500MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1200MM NUMBER OF REWINDER STATION;14 REWINDING WIDTH: 300-3000MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-tenoning spindle: 3 st.<br/>number of milling agregates: 5 st.<br/>spindle diameter: 50 mm<br/>control: cnc <br/>scm windor 100 cnc<br/>--------------------------------<br/>powerful and flexible production plant for windows and doors<br/><br/>machining of workpieces up to 4500 mm.<br/>minimum workpiece length (inside of the journal): 200 mm<br/>maximum workpiece thickness: 130 mm<br/><br/>slot part:<br/>--------------------------------<br/><br/>pos. 1: chop saw<br/>--------------------------------<br/>- engine 4 kw<br/>- 3000 rpm<br/>- spindle diameter 40 mm<br/>- maximum tool diameter 400 mm, bore 80 mm<br/><br/>pos. 2: 1. slot spindle<br/>--------------------------------<br/>- high performance spindle with top bearing, spindle length 620 mm<br/>- spindle diameter 50 mm<br/>- engine 11 kw<br/>- 3500 rpm<br/>- maximum tool diameter 370 mm<br/>- counter device jolly<br/>- stepless vertical positioning<br/>- automatic slanted window device +/- 60 degrees<br/><br/>pos. 3: optima 16, drill head<br/>--------------------------------<br/><br/>> dowel drilling front and longitudinal horizontal:<br/>head with 11 independent spindles with axis distance 32 mm<br/>drilling depth max: 55 mm<br/>freely programmable vertical positioning<br/>3 position rotation 0-90 degrees<br/><br/>> olive drilling (vertically from above)<br/>3 spindles, axial distance 21.5 mm<br/><br/>> turn-tilt drilling, double pot (vertically from above)<br/>2 spindles axis distance: 22 mm<br/><br/>pos. 4: 2. slot spindle<br/>--------------------------------<br/>- high performance spindle with top bearing, spindle length 620 mm<br/>- spindle diameter 50 mm<br/>- engine 11 kw<br/>- 3500 rpm<br/>- maximum tool diameter 370 mm<br/>- counter device jolly<br/>- stepless vertical positioning<br/>- automatic slanted window device +/- 60 degrees<br/><br/>pos. 5: electric spindle with hsk 63 f tool holder<br/>--------------------------------<br/>- min / max. turning speed 1000-12000 rpm<br/>- maximum motor power 11 kw<br/>- water cooling<br/>- rapid 24 automatic tool changer with 24 positions<br/><br/><br/>profile part<br/>--------------------------------<br/><br/>pos. 5 l: electric spindle with hsk 63 f tool holder<br/>--------------------------------<br/>- working from the left<br/>- min / max. turning speed 1000-12000 rpm<br/>- maximum motor power 11 kw<br/>- water cooling<br/>- rapid 24 automatic tool changer with 24 positions<br/><br/>pos. 6: 1st profile spindle from the right<br/>--------------------------------<br/>- high performance spindle with top bearing, spindle length 620 mm<br/>- spindle diameter 50 mm<br/>- engine 11 kw<br/>- 6000 rpm<br/>- tool diameter min./max. 130-250 mm<br/>- stepless vertical positioning<br/>- stepless horizontal positioning<br/><br/>pos. 7: 2nd profile spindle from the right<br/>--------------------------------<br/>- high performance spindle with top bearing, spindle length 620 mm<br/>- spindle diameter 50 mm<br/>- engine 11 kw<br/>- 6000 rpm<br/>- tool diameter min./max. 130-250 mm<br/>- stepless vertical positioning<br/>- stepless horizontal positioning<br/><br/>pos. 8: aggregate horizontally from above<br/>--------------------------------<br/>- spindle length 130 mm<br/>- spindle diameter 40 mm<br/>- motor 3 kw<br/>- 6000 rpm<br/>- tool diameter min./max. 170-220 mm<br/>- adjustment axis 50 mm<br/>- stepless vertical positioning<br/>- stepless horizontal positioning<br/><br/>pos. 8: aggregate horizontally from below<br/>--------------------------------<br/>- spindle length 130 mm<br/>- spindle diameter 40 mm<br/>- motor 3 kw<br/>- 6000 rpm<br/>- tool diameter min./max. 170-220 mm<br/>- adjustment axis 120 mm<br/>- stepless vertical positioning<br/>- stepless horizontal positioning<br/><br/><br/>other features<br/>--------------------------------<br/>- discharge conveyor<br/>- control control 100 p.c with next<br/><br/>option:<br/>--------------------------------<br/>used tools, corner joint countered and dowelled.<br/>iv 68,78,88 wood<br/>iv 68.78 wood aluminum<br/><br/><br/>(technical description according to the manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 3 ST.
NUMBER OF MILLING AGREGATES: 5 ST.
SPINDLE DIAMETER: 50 MM
CONTROL: CNC
SCM WINDOR 100 CNC
--------------------------------
POWERFUL AND FLEXIBLE PRODUCTION PLANT FOR WINDOWS AND DOORS

MACHINING OF WORKPIECES UP TO 4500 MM.
MINIMUM WORKPIECE LENGTH (INSIDE OF THE JOURNAL): 200 MM
MAXIMUM WORKPIECE THICKNESS: 130 MM

SLOT PART:
--------------------------------

POS. 1: CHOP SAW
--------------------------------
- ENGINE 4 KW
- 3000 RPM
- SPINDLE DIAMETER 40 MM
- MAXIMUM TOOL DIAMETER 400 MM, BORE 80 MM

POS. 2: 1. SLOT SPINDLE
--------------------------------
- HIGH PERFORMANCE SPINDLE WITH TOP BEARING, SPINDLE LENGTH 620 MM
- SPINDLE DIAMETER 50 MM
- ENGINE 11 KW
- 3500 RPM
- MAXIMUM TOOL DIAMETER 370 MM
- COUNTER DEVICE JOLLY
- STEPLESS VERTICAL POSITIONING
- AUTOMATIC SLANTED WINDOW DEVICE +/- 60 DEGREES

POS. 3: OPTIMA 16, DRILL HEAD
--------------------------------

> DOWEL DRILLING FRONT AND LONGITUDINAL HORIZONTAL:
HEAD WITH 11 INDEPENDENT SPINDLES WITH AXIS DISTANCE 32 MM
DRILLING DEPTH MAX: 55 MM
FREELY PROGRAMMABLE VERTICAL POSITIONING
3 POSITION ROTATION 0-90 DEGREES

> OLIVE DRILLING (VERTICALLY FROM ABOVE)
3 SPINDLES, AXIAL DISTANCE 21.5 MM

> TURN-TILT DRILLING, DOUBLE POT (VERTICALLY FROM ABOVE)
2 SPINDLES AXIS DISTANCE: 22 MM

POS. 4: 2. SLOT SPINDLE
--------------------------------
- HIGH PERFORMANCE SPINDLE WITH TOP BEARING, SPINDLE LENGTH 620 MM
- SPINDLE DIAMETER 50 MM
- ENGINE 11 KW
- 3500 RPM
- MAXIMUM TOOL DIAMETER 370 MM
- COUNTER DEVICE JOLLY
- STEPLESS VERTICAL POSITIONING
- AUTOMATIC SLANTED WINDOW DEVICE +/- 60 DEGREES

POS. 5: ELECTRIC SPINDLE WITH HSK 63 F TOOL HOLDER
--------------------------------
- MIN / MAX. TURNING SPEED 1000-12000 RPM
- MAXIMUM MOTOR POWER 11 KW
- WATER COOLING
- RAPID 24 AUTOMATIC TOOL CHANGER WITH 24 POSITIONS


PROFILE PART
--------------------------------

POS. 5 L: ELECTRIC SPINDLE WITH HSK 63 F TOOL HOLDER
--------------------------------
- WORKING FROM THE LEFT
- MIN / MAX. TURNING SPEED 1000-12000 RPM
- MAXIMUM MOTOR POWER 11 KW
- WATER COOLING
- RAPID 24 AUTOMATIC TOOL CHANGER WITH 24 POSITIONS

POS. 6: 1ST PROFILE SPINDLE FROM THE RIGHT
--------------------------------
- HIGH PERFORMANCE SPINDLE WITH TOP BEARING, SPINDLE LENGTH 620 MM
- SPINDLE DIAMETER 50 MM
- ENGINE 11 KW
- 6000 RPM
- TOOL DIAMETER MIN./MAX. 130-250 MM
- STEPLESS VERTICAL POSITIONING
- STEPLESS HORIZONTAL POSITIONING

POS. 7: 2ND PROFILE SPINDLE FROM THE RIGHT
--------------------------------
- HIGH PERFORMANCE SPINDLE WITH TOP BEARING, SPINDLE LENGTH 620 MM
- SPINDLE DIAMETER 50 MM
- ENGINE 11 KW
- 6000 RPM
- TOOL DIAMETER MIN./MAX. 130-250 MM
- STEPLESS VERTICAL POSITIONING
- STEPLESS HORIZONTAL POSITIONING

POS. 8: AGGREGATE HORIZONTALLY FROM ABOVE
--------------------------------
- SPINDLE LENGTH 130 MM
- SPINDLE DIAMETER 40 MM
- MOTOR 3 KW
- 6000 RPM
- TOOL DIAMETER MIN./MAX. 170-220 MM
- ADJUSTMENT AXIS 50 MM
- STEPLESS VERTICAL POSITIONING
- STEPLESS HORIZONTAL POSITIONING

POS. 8: AGGREGATE HORIZONTALLY FROM BELOW
--------------------------------
- SPINDLE LENGTH 130 MM
- SPINDLE DIAMETER 40 MM
- MOTOR 3 KW
- 6000 RPM
- TOOL DIAMETER MIN./MAX. 170-220 MM
- ADJUSTMENT AXIS 120 MM
- STEPLESS VERTICAL POSITIONING
- STEPLESS HORIZONTAL POSITIONING


OTHER FEATURES
--------------------------------
- DISCHARGE CONVEYOR
- CONTROL CONTROL 100 P.C WITH NEXT

OPTION:
--------------------------------
USED TOOLS, CORNER JOINT COUNTERED AND DOWELLED.
IV 68,78,88 WOOD
IV 68.78 WOOD ALUMINUM


(TECHNICAL DESCRIPTION ACCORDING TO THE MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-bopp plant  x2 (biaxially oriented polypropylene film production lines)

(1st plant)

make:bruckner(germany)

manufacturing year:1989

capacity: 13,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-50 micron

film width(trimmed);6500mm

mechanical and thermal layout:

thickness 12 micron / speed 220m/min / output 927kg/h

thickness 20 micron / speed 200m/min / output 1404kg/h

thickness 25 micron / speed 170m/min / output 1492kg/h

thickness 30 micron / speed 165m/min / output 1737kg/h

thickness 40 micron / speed 110m/min / output 1544kg/h

thickness 50 micron / speed 85m/min / output 1492kg/h

stretch ratio:machine direction 1:1~ 1:6

transverse direction: 1:6~1:10

speed:max.300m/min

production speed: 220m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 2400kg/h)

b.dosinf for satellite extruder: 2sets)(150kg/h, 150kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm, 21 d, 880kw dc motor

-melting extruder:dia.225mm, 20d. 338kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.75mm,30d,59kw dc motor, max.output 100kg/h

c.polymer filter for main extruder

-type:long life filter , 19 candles

-filter area: approx. 1.4m2

-heating:thermal oil heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:43ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-ddia.2000mm width 1200mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:650-800mm

-max.stretching width:7500mm

-outlet width:6000-6900mm

-preheating zone: 3 m x 5zone 

-stretching zone; 3 m x4zone

-annealing zone: 3m x 4zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 125 kw dc motor

    

5.thickness gauge: kamma ray 

6.winder

-automatic turret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1000mm

7.slitter

make:atlas

max. speed: 600m/min

max. working width: 6600mm

max. diameter of mill roll on unwinder:1000mm

number of rewinder station;12

rewinding width: 300-3000mm

  
  (2nd plant)  

make:mitsubishi(japan)

manufacturing year:1993

capacity: 14,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-60 micron

film width(trimmed);6300mm

mechanical and thermal layout:

thickness 12 micron / speed 240m/min / output 980kg/h

thickness 20 micron / speed 220m/min / output 1497kg/h

thickness 25 micron / speed 195m/min / output 1658kg/h

thickness 30 micron / speed 180m/min / output 1837kg/h

thickness 40 micron / speed 120m/min / output 1633kg/h

thickness 50 micron / speed 90m/min / output 1531kg/h

stretch ratio:machine direction 1:1~ 1:10

transverse direction: 1:7~1:10

speed:max.320m/min

production speed: 240m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 4000kg/h)

b.dosinf for satellite extruder: 2sets)800kg/h, 500kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm,700kw dc motor

-melting extruder:dia.220mm,350kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.115mm,160kw dc motor, max.output 300kg/h

-dia.90mm,90kw dc motor, max.output 200kg/h

c.polymer filter for main extruder

-type:multi disc type filter, 12 pieces

-filter area: approx. 2m2

-heating:electric heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:29ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-dia.1000mm 1ea, dia.2000mm x2ea, width 1300mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:600-1000mm

-max.stretching width:7446mm

-outlet width:6000-6700mm

-preheating zone: 3 m x 4zone / 4.5m x 2zones

-stretching zone; 3 m x5zone

-annealing zone: 1m x 1zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 132 kw ac motor

   

5.thickness gauge: kamma ray 

6.winder

-automatic yurret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1200mm

7.slitter

make:kampf(germany)

max. speed: 1000m/min

max. working width: 6500mm

max. diameter of mill roll on unwinder:1200mm

number of rewinder station;14

rewinding width: 300-3000mm

  
 bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

 BOPP PLANT X2 (BIAXIALLY ORIENTED POLYPROPYLENE FILM PRODUCTION LINES) (1ST PLANT) MAKE:BRUCKNER(GERMANY) MANUFACTURING YEAR:1989 CAPACITY: 13,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-50 MICRON FILM WIDTH(TRIMMED);6500MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 220M/MIN / OUTPUT 927KG/H THICKNESS 20 MICRON / SPEED 200M/MIN / OUTPUT 1404KG/H THICKNESS 25 MICRON / SPEED 170M/MIN / OUTPUT 1492KG/H THICKNESS 30 MICRON / SPEED 165M/MIN / OUTPUT 1737KG/H THICKNESS 40 MICRON / SPEED 110M/MIN / OUTPUT 1544KG/H THICKNESS 50 MICRON / SPEED 85M/MIN / OUTPUT 1492KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:6 TRANSVERSE DIRECTION: 1:6~1:10 SPEED:MAX.300M/MIN PRODUCTION SPEED: 220M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 2400KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)(150KG/H, 150KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM, 21 D, 880KW DC MOTOR -MELTING EXTRUDER:DIA.225MM, 20D. 338KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.75MM,30D,59KW DC MOTOR, MAX.OUTPUT 100KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:LONG LIFE FILTER , 19 CANDLES -FILTER AREA: APPROX. 1.4M2 -HEATING:THERMAL OIL HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:43EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DDIA.2000MM WIDTH 1200MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:650-800MM -MAX.STRETCHING WIDTH:7500MM -OUTLET WIDTH:6000-6900MM -PREHEATING ZONE: 3 M X 5ZONE -STRETCHING ZONE; 3 M X4ZONE -ANNEALING ZONE: 3M X 4ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 125 KW DC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC TURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1000MM 7.SLITTER MAKE:ATLAS MAX. SPEED: 600M/MIN MAX. WORKING WIDTH: 6600MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1000MM NUMBER OF REWINDER STATION;12 REWINDING WIDTH: 300-3000MM (2ND PLANT) MAKE:MITSUBISHI(JAPAN) MANUFACTURING YEAR:1993 CAPACITY: 14,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-60 MICRON FILM WIDTH(TRIMMED);6300MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 240M/MIN / OUTPUT 980KG/H THICKNESS 20 MICRON / SPEED 220M/MIN / OUTPUT 1497KG/H THICKNESS 25 MICRON / SPEED 195M/MIN / OUTPUT 1658KG/H THICKNESS 30 MICRON / SPEED 180M/MIN / OUTPUT 1837KG/H THICKNESS 40 MICRON / SPEED 120M/MIN / OUTPUT 1633KG/H THICKNESS 50 MICRON / SPEED 90M/MIN / OUTPUT 1531KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:10 TRANSVERSE DIRECTION: 1:7~1:10 SPEED:MAX.320M/MIN PRODUCTION SPEED: 240M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 4000KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)800KG/H, 500KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM,700KW DC MOTOR -MELTING EXTRUDER:DIA.220MM,350KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.115MM,160KW DC MOTOR, MAX.OUTPUT 300KG/H -DIA.90MM,90KW DC MOTOR, MAX.OUTPUT 200KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:MULTI DISC TYPE FILTER, 12 PIECES -FILTER AREA: APPROX. 2M2 -HEATING:ELECTRIC HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:29EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DIA.1000MM 1EA, DIA.2000MM X2EA, WIDTH 1300MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:600-1000MM -MAX.STRETCHING WIDTH:7446MM -OUTLET WIDTH:6000-6700MM -PREHEATING ZONE: 3 M X 4ZONE / 4.5M X 2ZONES -STRETCHING ZONE; 3 M X5ZONE -ANNEALING ZONE: 1M X 1ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 132 KW AC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC YURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1200MM 7.SLITTER MAKE:KAMPF(GERMANY) MAX. SPEED: 1000M/MIN MAX. WORKING WIDTH: 6500MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1200MM NUMBER OF REWINDER STATION;14 REWINDING WIDTH: 300-3000MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-tenoning spindle: 2 st.<br/>number of milling agregates: 5 st.<br/>spindle diameter: 50 mm<br/>weight: 11500 kg<br/>loading meters, approx.: 1360 m<br/>!! machine is currently being checked !!<br/><br/><br/># 2428 weinig unicontrol 12 cnc, with 2 tenoning spindles and vario-table<br/>--------------------------------<br/><br/>technical data summary<br/>--------------------------------<br/>(possibly additional accessories please inquire)<br/><br/>total weight: approx. 13000 kg<br/>slotted part: 5500 kg<br/>profil part: 5000 kg<br/><br/><br/>cutting edge saw<br/>--------------------------------<br/>> cross-cut saw electronically, horizontally infinitely adjustable: nc axis<br/>> number of tools: 1 pcs.<br/>> spindle speed: frequency controlled 3000-6000 rpm<br/>> spindle diameter: 40 mm<br/>> tool diameter max .: 400 mm<br/>> motor power: 3 kw<br/>> laser beam for detecting the saw section:<br/>> adjustment travel axial: nc axis integrated in the control<br/>> radial travel range: 150 mm<br/>> radial clocked to 8 positions for edge rounding from above<br/><br/>unit for edge rounding from below<br/>--------------------------------<br/>> axial adjustment together with crosscut saw<br/><br/>cnc controlled length stop<br/>--------------------------------<br/>> length 4500 mm<br/>> incl. positioned crosscut saw integrated into the control<br/><br/><br/>1. spigot and slotted spindle<br/>--------------------------------<br/>> number of tools: variable, cnc axis<br/>> tool clamping length: 640 mm<br/>> spindle stroke vertical: variable, cnc axis<br/>> spindle speed: 2925 rpm<br/>> spindle diameter: 50 mm<br/>> tool diameter: 380 - 400 mm<br/>> motor power: 15 kw<br/>> with follow-on counter<br/><br/><br/>2. spigot and slotted spindle<br/>--------------------------------<br/>> number of tools: variable, cnc axis<br/>> tool clamping length: 640 mm<br/>> spindle stroke vertical: variable, cnc axis<br/>> spindle speed: 2925 rpm<br/>> spindle diameter: 50 mm<br/>> tool diameter: 380 - 400 mm<br/>> motor power: 15 kw<br/>> with follow-on counter<br/><br/>> varioplus package<br/>tapping and slotting table with horizontal cnc axis travel 200 mm<br/><br/><br/>1. profileing spindle<br/>--------------------------------<br/>> position: right<br/>> number of tools: variable, cnc axis<br/>> tool clamping length: 400 mm with counter bearing<br/>> spindle stroke vertical: variable, cnc axis<br/>> spindle stroke horizontal: variable, cnc axis<br/>> spindle speed: 6000 rpm<br/>> spindle diameter: 50 mm<br/>> tooling circle max .: 232 mm<br/>> engine power: 11 kw<br/>> radial adjustment: cnc axis<br/>> axial adjustment: cnc axis<br/><br/><br/>2. profileing spindle<br/>--------------------------------<br/>> position: right<br/>> number of tools: variable, cnc axis<br/>> tool clamping length: 400 mm with counter bearing<br/>> spindle stroke vertical: variable, cnc axis<br/>> spindle stroke horizontal: variable, cnc axis<br/>> spindle speed: 6000 rpm<br/>> spindle diameter: 50 mm<br/>> tooling circle max .: 232 mm<br/>> engine power: 11 kw<br/>> radial adjustment: cnc axis<br/>> axial adjustment: cnc axis<br/><br/><br/>groove tool from above - before the last profile spindle<br/>--------------------------------<br/>> position: horizontal above<br/>> spindle speed: 9000 rpm<br/>> spindle diameter: 40 mm<br/>> tool clamping length: 40 mm<br/>> motor power: 3 kw<br/>> adjustment travel axial: 30 mm<br/>> radial adjustment: 125 mm<br/>> radial stroke on 8 positions by pneumatic turret<br/>> axial stroke on 8 positions by pneumatic turret<br/><br/><br/>profile spindle - fitting spindle - at the end of the machine<br/>--------------------------------<br/>> position: vertical right top<br/>> tool clamping length: 160 mm<br/>> spindle speed: 5850 rpm<br/>> spindle diameter: 40 mm<br/>> tooling circle max .: 210 mm<br/>> motor power: 3 kw<br/>> adjustment travel axial: 115 mm<br/>> adjustment travel radial: 100 mm<br/>> radial stroke on 8 positions by pneumatic turret<br/>> axial stroke on 8 positions by pneumatic turret<br/><br/><br/>groove tool from below- in the additional stand<br/>--------------------------------<br/>> position: horizontally down<br/>> tool clamping length: 125 mm<br/>> spindle speed: 5850 rpm<br/>> spindle diameter: 40 mm<br/>> tooling circle max .: 200 mm<br/>> motor power: 3 kw<br/>> adjustment travel axial: 100 mm<br/>> adjustment travel radial: 100 mm<br/>> axial and radial adjustment infinitely variable nc axis<br/><br/><br/>other features<br/>--------------------------------<br/>> online-capable<br/>> reverberation device for uneven re-folding<br/>> double pack<br/>> return conveyor for 1-man operation: slat conveyor<br/>> angular window arrangement: swivel angle 75 degrees<br/>> electronic angle display for inclined windows<br/>> control: pc nexus<br/>> nc axis for feed height adjustment<br/>> 1 axially clocked feed roller opposite profile milling units, for production<br/>of narrow, short parts (e.g., glass-dividing rungs)<br/>> 2 axially clocked feed rollers opposite the profile spindle to 8 positions<br/>by means of a pneumatic turret<br/>> table top to tool diameter clocked (2 positions)<br/>> sprout guide consisting of:<br/>automatically timed guide bar at the stop.<br/>sprout support strip from above in the area of ??profile milling unit / fitting <br/>spindle<br/>> sprout support ledge after the last profiling spindle vertically clocked<br/>> split pressure plate left for wood widths from 40 to 140 mm<br/>> automatic central lubrication<br/>> variot: horizontal cnc axis for slit table with adjustment travel 200 mm<br/><br/>option:<br/>--------------------------------<br/>used tools in different systems<br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 2 ST.
NUMBER OF MILLING AGREGATES: 5 ST.
SPINDLE DIAMETER: 50 MM
WEIGHT: 11500 KG
LOADING METERS, APPROX.: 1360 M
!! MACHINE IS CURRENTLY BEING CHECKED !!


# 2428 WEINIG UNICONTROL 12 CNC, WITH 2 TENONING SPINDLES AND VARIO-TABLE
--------------------------------

TECHNICAL DATA SUMMARY
--------------------------------
(POSSIBLY ADDITIONAL ACCESSORIES PLEASE INQUIRE)

TOTAL WEIGHT: APPROX. 13000 KG
SLOTTED PART: 5500 KG
PROFIL PART: 5000 KG


CUTTING EDGE SAW
--------------------------------
> CROSS-CUT SAW ELECTRONICALLY, HORIZONTALLY INFINITELY ADJUSTABLE: NC AXIS
> NUMBER OF TOOLS: 1 PCS.
> SPINDLE SPEED: FREQUENCY CONTROLLED 3000-6000 RPM
> SPINDLE DIAMETER: 40 MM
> TOOL DIAMETER MAX .: 400 MM
> MOTOR POWER: 3 KW
> LASER BEAM FOR DETECTING THE SAW SECTION:
> ADJUSTMENT TRAVEL AXIAL: NC AXIS INTEGRATED IN THE CONTROL
> RADIAL TRAVEL RANGE: 150 MM
> RADIAL CLOCKED TO 8 POSITIONS FOR EDGE ROUNDING FROM ABOVE

UNIT FOR EDGE ROUNDING FROM BELOW
--------------------------------
> AXIAL ADJUSTMENT TOGETHER WITH CROSSCUT SAW

CNC CONTROLLED LENGTH STOP
--------------------------------
> LENGTH 4500 MM
> INCL. POSITIONED CROSSCUT SAW INTEGRATED INTO THE CONTROL


1. SPIGOT AND SLOTTED SPINDLE
--------------------------------
> NUMBER OF TOOLS: VARIABLE, CNC AXIS
> TOOL CLAMPING LENGTH: 640 MM
> SPINDLE STROKE VERTICAL: VARIABLE, CNC AXIS
> SPINDLE SPEED: 2925 RPM
> SPINDLE DIAMETER: 50 MM
> TOOL DIAMETER: 380 - 400 MM
> MOTOR POWER: 15 KW
> WITH FOLLOW-ON COUNTER


2. SPIGOT AND SLOTTED SPINDLE
--------------------------------
> NUMBER OF TOOLS: VARIABLE, CNC AXIS
> TOOL CLAMPING LENGTH: 640 MM
> SPINDLE STROKE VERTICAL: VARIABLE, CNC AXIS
> SPINDLE SPEED: 2925 RPM
> SPINDLE DIAMETER: 50 MM
> TOOL DIAMETER: 380 - 400 MM
> MOTOR POWER: 15 KW
> WITH FOLLOW-ON COUNTER

> VARIOPLUS PACKAGE
TAPPING AND SLOTTING TABLE WITH HORIZONTAL CNC AXIS TRAVEL 200 MM


1. PROFILEING SPINDLE
--------------------------------
> POSITION: RIGHT
> NUMBER OF TOOLS: VARIABLE, CNC AXIS
> TOOL CLAMPING LENGTH: 400 MM WITH COUNTER BEARING
> SPINDLE STROKE VERTICAL: VARIABLE, CNC AXIS
> SPINDLE STROKE HORIZONTAL: VARIABLE, CNC AXIS
> SPINDLE SPEED: 6000 RPM
> SPINDLE DIAMETER: 50 MM
> TOOLING CIRCLE MAX .: 232 MM
> ENGINE POWER: 11 KW
> RADIAL ADJUSTMENT: CNC AXIS
> AXIAL ADJUSTMENT: CNC AXIS


2. PROFILEING SPINDLE
--------------------------------
> POSITION: RIGHT
> NUMBER OF TOOLS: VARIABLE, CNC AXIS
> TOOL CLAMPING LENGTH: 400 MM WITH COUNTER BEARING
> SPINDLE STROKE VERTICAL: VARIABLE, CNC AXIS
> SPINDLE STROKE HORIZONTAL: VARIABLE, CNC AXIS
> SPINDLE SPEED: 6000 RPM
> SPINDLE DIAMETER: 50 MM
> TOOLING CIRCLE MAX .: 232 MM
> ENGINE POWER: 11 KW
> RADIAL ADJUSTMENT: CNC AXIS
> AXIAL ADJUSTMENT: CNC AXIS


GROOVE TOOL FROM ABOVE - BEFORE THE LAST PROFILE SPINDLE
--------------------------------
> POSITION: HORIZONTAL ABOVE
> SPINDLE SPEED: 9000 RPM
> SPINDLE DIAMETER: 40 MM
> TOOL CLAMPING LENGTH: 40 MM
> MOTOR POWER: 3 KW
> ADJUSTMENT TRAVEL AXIAL: 30 MM
> RADIAL ADJUSTMENT: 125 MM
> RADIAL STROKE ON 8 POSITIONS BY PNEUMATIC TURRET
> AXIAL STROKE ON 8 POSITIONS BY PNEUMATIC TURRET


PROFILE SPINDLE - FITTING SPINDLE - AT THE END OF THE MACHINE
--------------------------------
> POSITION: VERTICAL RIGHT TOP
> TOOL CLAMPING LENGTH: 160 MM
> SPINDLE SPEED: 5850 RPM
> SPINDLE DIAMETER: 40 MM
> TOOLING CIRCLE MAX .: 210 MM
> MOTOR POWER: 3 KW
> ADJUSTMENT TRAVEL AXIAL: 115 MM
> ADJUSTMENT TRAVEL RADIAL: 100 MM
> RADIAL STROKE ON 8 POSITIONS BY PNEUMATIC TURRET
> AXIAL STROKE ON 8 POSITIONS BY PNEUMATIC TURRET


GROOVE TOOL FROM BELOW- IN THE ADDITIONAL STAND
--------------------------------
> POSITION: HORIZONTALLY DOWN
> TOOL CLAMPING LENGTH: 125 MM
> SPINDLE SPEED: 5850 RPM
> SPINDLE DIAMETER: 40 MM
> TOOLING CIRCLE MAX .: 200 MM
> MOTOR POWER: 3 KW
> ADJUSTMENT TRAVEL AXIAL: 100 MM
> ADJUSTMENT TRAVEL RADIAL: 100 MM
> AXIAL AND RADIAL ADJUSTMENT INFINITELY VARIABLE NC AXIS


OTHER FEATURES
--------------------------------
> ONLINE-CAPABLE
> REVERBERATION DEVICE FOR UNEVEN RE-FOLDING
> DOUBLE PACK
> RETURN CONVEYOR FOR 1-MAN OPERATION: SLAT CONVEYOR
> ANGULAR WINDOW ARRANGEMENT: SWIVEL ANGLE 75 DEGREES
> ELECTRONIC ANGLE DISPLAY FOR INCLINED WINDOWS
> CONTROL: PC NEXUS
> NC AXIS FOR FEED HEIGHT ADJUSTMENT
> 1 AXIALLY CLOCKED FEED ROLLER OPPOSITE PROFILE MILLING UNITS, FOR PRODUCTION
OF NARROW, SHORT PARTS (E.G., GLASS-DIVIDING RUNGS)
> 2 AXIALLY CLOCKED FEED ROLLERS OPPOSITE THE PROFILE SPINDLE TO 8 POSITIONS
BY MEANS OF A PNEUMATIC TURRET
> TABLE TOP TO TOOL DIAMETER CLOCKED (2 POSITIONS)
> SPROUT GUIDE CONSISTING OF:
AUTOMATICALLY TIMED GUIDE BAR AT THE STOP.
SPROUT SUPPORT STRIP FROM ABOVE IN THE AREA OF ??PROFILE MILLING UNIT / FITTING
SPINDLE
> SPROUT SUPPORT LEDGE AFTER THE LAST PROFILING SPINDLE VERTICALLY CLOCKED
> SPLIT PRESSURE PLATE LEFT FOR WOOD WIDTHS FROM 40 TO 140 MM
> AUTOMATIC CENTRAL LUBRICATION
> VARIOT: HORIZONTAL CNC AXIS FOR SLIT TABLE WITH ADJUSTMENT TRAVEL 200 MM

OPTION:
--------------------------------
USED TOOLS IN DIFFERENT SYSTEMS
(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 97.000 €
Ubicación: Land-brand new with warranty 6 months.,
3 months for delivery,agency offer

planetary dual pinch plate pre-bending -new hydraulic technology.

-width of plate:	3000	mm
-thickness of plate rolling:	32	mm
-pre-bending thickness	25	mm
-total electric power	25	hp
-nominal capacity rated on a plate yield strength 255 mpa.
-minimum bending diameter id 500 mm obtainable with medium plate thickness

rolls dimensions:	-surface length mm. 3100
-upper roll mm.	410
-pinch roll mm.	370
-side rolls mm.	300
configuration installed:
-hardening of the four rolls, high surface hardness 54 / 58 hrc.
-conical plate bending hydraulic attachment
-central rolls individual driven hydraulic motorized with axial planetary gear unit independent on each roll.
-pre-bending facility with adjustable load pressing force of the pinch roll to optimize the edge setting of the plate.
-calibration system for the re-rolling of the welded shells.
-digital readout position of the two side rolls.

shipment dimension and packing list:
nr. 1 machine package 205 x 570 x h 210 cm
-nr. 1 control console package 100 x 80 x h90 cm
-total weight 19 ton BRAND NEW WITH WARRANTY 6 MONTHS., 3 MONTHS FOR DELIVERY,AGENCY OFFER PLANETARY DUAL PINCH PLATE PRE-BENDING -NEW HYDRAULIC TECHNOLOGY. -WIDTH OF PLATE: 3000 MM -THICKNESS OF PLATE ROLLING: 32 MM -PRE-BENDING THICKNESS 25 MM -TOTAL ELECTRIC POWER 25 HP -NOMINAL CAPACITY RATED ON A PLATE YIELD STRENGTH 255 MPA. -MINIMUM BENDING DIAMETER ID 500 MM OBTAINABLE WITH MEDIUM PLATE THICKNESS ROLLS DIMENSIONS: -SURFACE LENGTH MM. 3100 -UPPER ROLL MM. 410 -PINCH ROLL MM. 370 -SIDE ROLLS MM. 300 CONFIGURATION INSTALLED: -HARDENING OF THE FOUR ROLLS, HIGH SURFACE HARDNESS 54 / 58 HRC. -CONICAL PLATE BENDING HYDRAULIC ATTACHMENT -CENTRAL ROLLS INDIVIDUAL DRIVEN HYDRAULIC MOTORIZED WITH AXIAL PLANETARY GEAR UNIT INDEPENDENT ON EACH ROLL. -PRE-BENDING FACILITY WITH ADJUSTABLE LOAD PRESSING FORCE OF THE PINCH ROLL TO OPTIMIZE THE EDGE SETTING OF THE PLATE. -CALIBRATION SYSTEM FOR THE RE-ROLLING OF THE WELDED SHELLS. -DIGITAL READOUT POSITION OF THE TWO SIDE ROLLS. SHIPMENT DIMENSION AND PACKING LIST: NR. 1 MACHINE PACKAGE 205 X 570 X H 210 CM -NR. 1 CONTROL CONSOLE PACKAGE 100 X 80 X H90 CM -TOTAL WEIGHT 19 TON
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-grinding diameter: 500 mm<br/>grinding length: 2940 mm<br/>centre height: 250 mm<br/>control: siemens 840d <br/>centre distance: 3000 mm<br/>stroke of the table: max. 3200 mm<br/>table feed: 0,001 - 4000 mm/min<br/>rapid traverse of table: 9 m/min<br/>table swivelling +/-: +4/-2 grad<br/>grinding wheel size: 500x100x203 mm<br/>peripheral speed: 18 - 36 m/sec<br/>spindle speeds: 6 - 900 u/min<br/>grinding head swivelling: 90 grad<br/>tailstock quill taper mt: 5 <br/>tailstock quill stroke: 80 mm<br/>grinding spindle drive: 9,5 kw<br/>working spindle drive: 0,1 - 3,1 kw<br/>hydraulic motor: 2,2 kw<br/>max. workpiece weight between centers: 500 kg<br/>workpiece weight in steadies max.: 840 kg<br/>total power requirement:  kw<br/>weight of the machine ca.: 14,1 t<br/>dimensions of the machine ca.: 8,9 x 3,42 x 1,94 m<br/>* cnc control siemens sinumerik 840d with operating panel op 10<br/>  and color flat screen tft 10,4<br/>  with machine control panel mpc 19<br/>* remote control panel with electronic handwheel for feeding<br/>  the grinding spindle stand and table<br/>* digital servo drives simodrive 611d for the axis x, z , c9<br/>* cnc fully controlled b axis 195 °/-30° - smallest<br/>  programmable adjustment of the grinding spindle<br/>  via cnc program 0.001 °<br/>* cnc-fully controlled c-axis in mutual interpolation<br/>  with x or z-axis<br/>* complete internal grinding device, incl. hydraulic tiltable<br/>  dresser on the table for diameter and plan dressing,<br/>  coolant supply to workpiece spindle stock<br/>* internal grinding spindle<br/>* full cover of the machine<br/>* workpiece clamping control in axial axis<br/>* coolant system with belt filter system knoll vrf 300<br/>* suction<br/>* electric 2-jaw bezel Ø 12-70<br/>* 2 live centers mk 5<br/>* 3-point bezel Ø 30-130<br/>* hydraulic swivelable dresser<br/>* rigid dresser can be mounted on the machine bed<br/>* 2 pcs. 2 point bezel Ø 10-140<br/>* 3-jaw chuck Ø 250<br/>* 2 mounting flanges for solid discs<br/>* 2 auxiliary lunettes Ø 65-200<br/> price when new 20004 according to seller: euro 440.000,-<br/><br/> machine inspectable under power near düsseldorf/germany.<br/><br/><br/><br/><br/> GRINDING DIAMETER: 500 MM
GRINDING LENGTH: 2940 MM
CENTRE HEIGHT: 250 MM
CONTROL: SIEMENS 840D
CENTRE DISTANCE: 3000 MM
STROKE OF THE TABLE: MAX. 3200 MM
TABLE FEED: 0,001 - 4000 MM/MIN
RAPID TRAVERSE OF TABLE: 9 M/MIN
TABLE SWIVELLING +/-: +4/-2 GRAD
GRINDING WHEEL SIZE: 500X100X203 MM
PERIPHERAL SPEED: 18 - 36 M/SEC
SPINDLE SPEEDS: 6 - 900 U/MIN
GRINDING HEAD SWIVELLING: 90 GRAD
TAILSTOCK QUILL TAPER MT: 5
TAILSTOCK QUILL STROKE: 80 MM
GRINDING SPINDLE DRIVE: 9,5 KW
WORKING SPINDLE DRIVE: 0,1 - 3,1 KW
HYDRAULIC MOTOR: 2,2 KW
MAX. WORKPIECE WEIGHT BETWEEN CENTERS: 500 KG
WORKPIECE WEIGHT IN STEADIES MAX.: 840 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 14,1 T
DIMENSIONS OF THE MACHINE CA.: 8,9 X 3,42 X 1,94 M
* CNC CONTROL SIEMENS SINUMERIK 840D WITH OPERATING PANEL OP 10
AND COLOR FLAT SCREEN TFT 10,4
WITH MACHINE CONTROL PANEL MPC 19
* REMOTE CONTROL PANEL WITH ELECTRONIC HANDWHEEL FOR FEEDING
THE GRINDING SPINDLE STAND AND TABLE
* DIGITAL SERVO DRIVES SIMODRIVE 611D FOR THE AXIS X, Z , C9
* CNC FULLY CONTROLLED B AXIS 195 °/-30° - SMALLEST
PROGRAMMABLE ADJUSTMENT OF THE GRINDING SPINDLE
VIA CNC PROGRAM 0.001 °
* CNC-FULLY CONTROLLED C-AXIS IN MUTUAL INTERPOLATION
WITH X OR Z-AXIS
* COMPLETE INTERNAL GRINDING DEVICE, INCL. HYDRAULIC TILTABLE
DRESSER ON THE TABLE FOR DIAMETER AND PLAN DRESSING,
COOLANT SUPPLY TO WORKPIECE SPINDLE STOCK
* INTERNAL GRINDING SPINDLE
* FULL COVER OF THE MACHINE
* WORKPIECE CLAMPING CONTROL IN AXIAL AXIS
* COOLANT SYSTEM WITH BELT FILTER SYSTEM KNOLL VRF 300
* SUCTION
* ELECTRIC 2-JAW BEZEL Ø 12-70
* 2 LIVE CENTERS MK 5
* 3-POINT BEZEL Ø 30-130
* HYDRAULIC SWIVELABLE DRESSER
* RIGID DRESSER CAN BE MOUNTED ON THE MACHINE BED
* 2 PCS. 2 POINT BEZEL Ø 10-140
* 3-JAW CHUCK Ø 250
* 2 MOUNTING FLANGES FOR SOLID DISCS
* 2 AUXILIARY LUNETTES Ø 65-200
PRICE WHEN NEW 20004 ACCORDING TO SELLER: EURO 440.000,-

MACHINE INSPECTABLE UNDER POWER NEAR DüSSELDORF/GERMANY.




Vendedor: EKW Werkzeugmaschinen AG & Co. KG
Año de construcción: usado
Precio: 115.000 €
Ubicación: Land-3-roll hydraulic with dual pre-pinch planetary configuration.

new to complete, 45 days from order.

-plate width 3000 mm    
-capacity rolling plate thickness 50 mm  
-pre-pinch plate thickness 40 mm  
 
machine configuration and accessories installed: 
-useful surface  length on the rolls  3100 mm
-upper roll size 480 mm  
-lower rolls size  440 mm  
-digital position readouts.
-hardening treatment    of the 3 rolls.
-3 rolls driven hydraulic motorized with independent axial gear box on each roll.  
-conical plate bending attachment  with tiltable lower rolls hydraulic.
-ce quality certification, made in italy manufacturing.
-service manuals  and operation instruction manuals.   
-hydraulic diagrams  -electric & electronic schematics with parts list.   
-set of service tools for maintenance.  
-electric power  installed  50hp.  
-3 phase voltage to be specified

warranty 12 months.

erection and commissioning on request at the cost

shipping on 40’ flat rack  cost approx. euro 7.500,00
 3-ROLL HYDRAULIC WITH DUAL PRE-PINCH PLANETARY CONFIGURATION. NEW TO COMPLETE, 45 DAYS FROM ORDER. -PLATE WIDTH 3000 MM -CAPACITY ROLLING PLATE THICKNESS 50 MM -PRE-PINCH PLATE THICKNESS 40 MM MACHINE CONFIGURATION AND ACCESSORIES INSTALLED: -USEFUL SURFACE LENGTH ON THE ROLLS 3100 MM -UPPER ROLL SIZE 480 MM -LOWER ROLLS SIZE 440 MM -DIGITAL POSITION READOUTS. -HARDENING TREATMENT OF THE 3 ROLLS. -3 ROLLS DRIVEN HYDRAULIC MOTORIZED WITH INDEPENDENT AXIAL GEAR BOX ON EACH ROLL. -CONICAL PLATE BENDING ATTACHMENT WITH TILTABLE LOWER ROLLS HYDRAULIC. -CE QUALITY CERTIFICATION, MADE IN ITALY MANUFACTURING. -SERVICE MANUALS AND OPERATION INSTRUCTION MANUALS. -HYDRAULIC DIAGRAMS -ELECTRIC & ELECTRONIC SCHEMATICS WITH PARTS LIST. -SET OF SERVICE TOOLS FOR MAINTENANCE. -ELECTRIC POWER INSTALLED 50HP. -3 PHASE VOLTAGE TO BE SPECIFIED WARRANTY 12 MONTHS. ERECTION AND COMMISSIONING ON REQUEST AT THE COST SHIPPING ON 40’ FLAT RACK COST APPROX. EURO 7.500,00
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Precio: used machinery auction RESALE 37.900 €
Ubicación: Land-weight approx.: 9600 kg<br/>turning diameter: 500 mm<br/>control: siemens sinumerik 840 d <br/>turning length: 2000 mm<br/>dimensions (l x w x h) approx.: 5900 x 2810 x 2600 mm<br/>number of places for driven tools: 12 <br/>toolchanger positions: 12 <br/>turning speed range: 10 - 3000 rpm<br/>rapid travel range: 12/24 m/min<br/>longitudinal slide -travel: 2210 mm<br/>cross slide - travel: 370 mm<br/>spindle bore: 112 mm<br/>tool taper: din 69880 <br/>feed range: 0,1 - 12000/0,1 - 24000 mm/r<br/>total power requirement: 65 kw<br/>description: <b>niles-simmons n 30/2000 cnc lathe</b><br> - machine no.: 310.067<br> - operating voltage: 400 v, 50 hz<br> - swing diameter over bed: 635 mm<br> - swing diameter over bed slide: 400 mm<br> - total connected load 100/60% dc: 37/46 kw<br> - working height: 1250 mm<br> - max. travel of z-slide at position tool carriage system on turning centre, from rotary spindle until unit of tool carriage: 1793 mm<br> - spindle head din 55026: size a 11<br> - diameter at front bearing: 200 mm<br> - feed force of x- and z-axis: 10/16 kn<br> - tool holder shaft diameter: 50 mm<br> - pitch circle diameter: 490 mm<br> - oscillating circuit diameter: 780 mm<br> - main cut force: 12 kn<br> - switch time 180°: 3,0 sec<br> - quill diameter: 135 mm<br> - quill stroke: 150 mm<br> - internal taper: mk 5<br> - axial force, manual adjustable: 2-18 kn<br> - travel speed of quill/tailstock: 8/5 m/min<br> - inclusive tailstock dragged<br> - c- and y-axis<br> - with chip conveyor, belt width: 218 mm<br> - with coolant unit, hollow clamping cylinder, smw-autoblock chuck d315 and steady rest slu 3.1 dragged<br> - comes with documentation<br> - attention: without tool holders and tools<br> - for pick up a normal truck is enough<br> - video attached WEIGHT APPROX.: 9600 KG
TURNING DIAMETER: 500 MM
CONTROL: SIEMENS SINUMERIK 840 D
TURNING LENGTH: 2000 MM
DIMENSIONS (L X W X H) APPROX.: 5900 X 2810 X 2600 MM
NUMBER OF PLACES FOR DRIVEN TOOLS: 12
TOOLCHANGER POSITIONS: 12
TURNING SPEED RANGE: 10 - 3000 RPM
RAPID TRAVEL RANGE: 12/24 M/MIN
LONGITUDINAL SLIDE -TRAVEL: 2210 MM
CROSS SLIDE - TRAVEL: 370 MM
SPINDLE BORE: 112 MM
TOOL TAPER: DIN 69880
FEED RANGE: 0,1 - 12000/0,1 - 24000 MM/R
TOTAL POWER REQUIREMENT: 65 KW
DESCRIPTION: NILES-SIMMONS N 30/2000 CNC LATHE
- MACHINE NO.: 310.067
- OPERATING VOLTAGE: 400 V, 50 HZ
- SWING DIAMETER OVER BED: 635 MM
- SWING DIAMETER OVER BED SLIDE: 400 MM
- TOTAL CONNECTED LOAD 100/60% DC: 37/46 KW
- WORKING HEIGHT: 1250 MM
- MAX. TRAVEL OF Z-SLIDE AT POSITION TOOL CARRIAGE SYSTEM ON TURNING CENTRE, FROM ROTARY SPINDLE UNTIL UNIT OF TOOL CARRIAGE: 1793 MM
- SPINDLE HEAD DIN 55026: SIZE A 11
- DIAMETER AT FRONT BEARING: 200 MM
- FEED FORCE OF X- AND Z-AXIS: 10/16 KN
- TOOL HOLDER SHAFT DIAMETER: 50 MM
- PITCH CIRCLE DIAMETER: 490 MM
- OSCILLATING CIRCUIT DIAMETER: 780 MM
- MAIN CUT FORCE: 12 KN
- SWITCH TIME 180°: 3,0 SEC
- QUILL DIAMETER: 135 MM
- QUILL STROKE: 150 MM
- INTERNAL TAPER: MK 5
- AXIAL FORCE, MANUAL ADJUSTABLE: 2-18 KN
- TRAVEL SPEED OF QUILL/TAILSTOCK: 8/5 M/MIN
- INCLUSIVE TAILSTOCK DRAGGED
- C- AND Y-AXIS
- WITH CHIP CONVEYOR, BELT WIDTH: 218 MM
- WITH COOLANT UNIT, HOLLOW CLAMPING CYLINDER, SMW-AUTOBLOCK CHUCK D315 AND STEADY REST SLU 3.1 DRAGGED
- COMES WITH DOCUMENTATION
- ATTENTION: WITHOUT TOOL HOLDERS AND TOOLS
- FOR PICK UP A NORMAL TRUCK IS ENOUGH
- VIDEO ATTACHED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mfc.:	jagenberg		type:	i0		
new ac inverter ? 40.5 kw installed in 2007	
working width:	max. 2450 mm		winding dia.:	1500 mm
unwinding dia.:	2200 mm			grammage:	50 -350 gsm
the width of the unwind le is 3000 mm.
axial movement:	260 mm			speed:		850 m/min.
 MFC.: JAGENBERG TYPE: I0 NEW AC INVERTER ? 40.5 KW INSTALLED IN 2007 WORKING WIDTH: MAX. 2450 MM WINDING DIA.: 1500 MM UNWINDING DIA.: 2200 MM GRAMMAGE: 50 -350 GSM THE WIDTH OF THE UNWIND LE IS 3000 MM. AXIAL MOVEMENT: 260 MM SPEED: 850 M/MIN.
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-lifting capacity in kg: 3000 kg,lift: - mm,fork length: 1,58 m,allowable maximum weight: 9000 kg,axial load - front: 7740 kg,axis load in the back: 3200 kg,weight of the machine ca.: 9,0 t,dimensions of machine: l:3,8xb:2,3xh:2,5 (ohne zinken) m,it is dealing about terrain forklifter. motor: 3 cylinder deutz diesel motor , 27 kw lifting frame: fork length 1580mm, fork width 150mm height of lifting frame 2870mm fork beams width 1750mm on sale as is!  optional with snow shield and transport shovel available. LIFTING CAPACITY IN KG: 3000 KG,LIFT: - MM,FORK LENGTH: 1,58 M,ALLOWABLE MAXIMUM WEIGHT: 9000 KG,AXIAL LOAD - FRONT: 7740 KG,AXIS LOAD IN THE BACK: 3200 KG,WEIGHT OF THE MACHINE CA.: 9,0 T,DIMENSIONS OF MACHINE: L:3,8XB:2,3XH:2,5 (OHNE ZINKEN) M,IT IS DEALING ABOUT TERRAIN FORKLIFTER. MOTOR: 3 CYLINDER DEUTZ DIESEL MOTOR , 27 KW LIFTING FRAME: FORK LENGTH 1580MM, FORK WIDTH 150MM HEIGHT OF LIFTING FRAME 2870MM FORK BEAMS WIDTH 1750MM ON SALE AS IS! OPTIONAL WITH SNOW SHIELD AND TRANSPORT SHOVEL AVAILABLE.
Vendedor: WMW AG
Año de construcción: usado
Ubicación: Land-one used 3 megawatt kkk siemens afa 6 da condensing steam turbine for sale. the turbine has only 19200 running hours after a major overhaul in 2005. the turbine was reduced in power by siemens from 4.4 mw down to 3 mw in 2005. the scope of supply is absolutely complete: turbine, generator, water cooled vacuum condenser, canopy, panel boards for lv, the 10 kv-system and everything else. the turbine with all its accessories fits in two trucks or two 40-ft-ot-containers. only the vacuum condenser needs one extra flat rack.


type kkk siemens afa 6 da

el. power  3000 kw

live steam pressure / temp. 21,5 bar gauge / 275°c

turning speed  11543 / 1500 r/min

exhaust steam pressure  0,23 bar gauge

steam consumption  23,1 t / h at 3 mw

year of manufacturing  1997

year of major overhaul  2005

weight turbine  12 tons

weight generator  13 tons

mesurements canopy  4,50m w * 8,80m l * 3,30m h

generator, leroy somer   lsa 56 bl7-4p, 5200 kva, 50 hz, 10 kv

------------------------------------------------------------

vacuum condenser, water cooled serck como

type cd 36/48 hsk 180- 1 fl. axial

th. power 19490 kw

steam flow  max 32 t/h

condensing pressure  0,23 bar gauge

cooling water flow  1200 m³/h

heat exchanger surface  274 m²

mesurements  2,00 m w * 6,00 m l * 3,50 m h

more data, pictures and videos on request.  ONE USED 3 MEGAWATT KKK SIEMENS AFA 6 DA CONDENSING STEAM TURBINE FOR SALE. THE TURBINE HAS ONLY 19200 RUNNING HOURS AFTER A MAJOR OVERHAUL IN 2005. THE TURBINE WAS REDUCED IN POWER BY SIEMENS FROM 4.4 MW DOWN TO 3 MW IN 2005. THE SCOPE OF SUPPLY IS ABSOLUTELY COMPLETE: TURBINE, GENERATOR, WATER COOLED VACUUM CONDENSER, CANOPY, PANEL BOARDS FOR LV, THE 10 KV-SYSTEM AND EVERYTHING ELSE. THE TURBINE WITH ALL ITS ACCESSORIES FITS IN TWO TRUCKS OR TWO 40-FT-OT-CONTAINERS. ONLY THE VACUUM CONDENSER NEEDS ONE EXTRA FLAT RACK. TYPE KKK SIEMENS AFA 6 DA EL. POWER 3000 KW LIVE STEAM PRESSURE / TEMP. 21,5 BAR GAUGE / 275°C TURNING SPEED 11543 / 1500 R/MIN EXHAUST STEAM PRESSURE 0,23 BAR GAUGE STEAM CONSUMPTION 23,1 T / H AT 3 MW YEAR OF MANUFACTURING 1997 YEAR OF MAJOR OVERHAUL 2005 WEIGHT TURBINE 12 TONS WEIGHT GENERATOR 13 TONS MESUREMENTS CANOPY 4,50M W * 8,80M L * 3,30M H GENERATOR, LEROY SOMER LSA 56 BL7-4P, 5200 KVA, 50 HZ, 10 KV ------------------------------------------------------------ VACUUM CONDENSER, WATER COOLED SERCK COMO TYPE CD 36/48 HSK 180- 1 FL. AXIAL TH. POWER 19490 KW STEAM FLOW MAX 32 T/H CONDENSING PRESSURE 0,23 BAR GAUGE COOLING WATER FLOW 1200 M³/H HEAT EXCHANGER SURFACE 274 M² MESUREMENTS 2,00 M W * 6,00 M L * 3,50 M H MORE DATA, PICTURES AND VIDEOS ON REQUEST.
Vendedor: Kandlin Stromerzeuger-Ankauf GmbH
Año de construcción: usado
Ubicación: Land-control: liebherr mpst <br/>max. wheel diameter: 1000 mm<br/>max. module: 14 (18) <br/>milling slide travel: 800 mm<br/>table diameter: 710 mm<br/>screw size: 693 mm<br/>milling head -swivable +/-: 50 °<br/>tool taper: iso 50 <br/>shifting: max. 250 mm<br/>diameter of hob: max. 240 mm<br/>cutter length max.: 300 mm<br/>table hole: 190 mm<br/>axial-feeds: 0,1 - 20 mm/u<br/>radial feeds: 0,1 - 4 mm/u<br/>rapide traverse: 1000 - 3000 mm/min<br/>turning speeds: 25 - 250 u/min<br/>number of working hours: 68600 h<br/>total power requirement: 69 kw<br/>weight of the machine ca.: 16,00 t<br/>accessories available extensively:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> CONTROL: LIEBHERR MPST
MAX. WHEEL DIAMETER: 1000 MM
MAX. MODULE: 14 (18)
MILLING SLIDE TRAVEL: 800 MM
TABLE DIAMETER: 710 MM
SCREW SIZE: 693 MM
MILLING HEAD -SWIVABLE +/-: 50 °
TOOL TAPER: ISO 50
SHIFTING: MAX. 250 MM
DIAMETER OF HOB: MAX. 240 MM
CUTTER LENGTH MAX.: 300 MM
TABLE HOLE: 190 MM
AXIAL-FEEDS: 0,1 - 20 MM/U
RADIAL FEEDS: 0,1 - 4 MM/U
RAPIDE TRAVERSE: 1000 - 3000 MM/MIN
TURNING SPEEDS: 25 - 250 U/MIN
NUMBER OF WORKING HOURS: 68600 H
TOTAL POWER REQUIREMENT: 69 KW
WEIGHT OF THE MACHINE CA.: 16,00 T
ACCESSORIES AVAILABLE EXTENSIVELY:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more AXIAL types: