338 ofertas

Año de construcción: usado
Ubicación: Land-this listing is for 1 of 2 2004 emicon compact air cooled chiller with screw compressor and axial fans.
lp 16.0 bar hp 30.0 bar
12,200 kg THIS LISTING IS FOR 1 OF 2 2004 EMICON COMPACT AIR COOLED CHILLER WITH SCREW COMPRESSOR AND AXIAL FANS. LP 16.0 BAR HP 30.0 BAR 12,200 KG
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-number of spindles: 8 st.<br/>working width: 260 mm<br/>working height: 160 mm<br/>length of the planing table: 2000 mm<br/>feed motor: 7 kw<br/>feed speed: 5-30 m/min.<br/>dimensions (l/w/h): 5700x2100x1740 mm<br/>weight of the machine ca.: 5000 kg<br/>control: weinig powercom <br/>weinig powermat 1000 cnc, year 2012<br/>-------------------------------<br/><br/>executive summary:<br/>-------------------------------<br/>8 spindles<br/>hsk / powerlock<br/>large powercom controller<br/>grooved<br/>axial and axial axes cnc controlled<br/><br/>detailed description:<br/>-------------------------------<br/><br/>technical specifications:<br/>-------------------------------<br/>working width max. 260 mm<br/>working height max. 160 mm<br/><br/>1. tool holder<br/>-------------------------------<br/>first lower tool holder<br/>engine with brake 15.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 125 - 180 mm<br/>in conjunction with powerlock 93 - 180 mm<br/>tool circle fold cutters 130-160 mm<br/>adjustment axial 17 mm<br/>electronic digital display for radial adjustment<br/>marathoncoating in front of 1st lower tool holder<br/><br/>2. tool holder powerlock / hsk<br/>-------------------------------<br/>first upper tool holder<br/>engine with brake 15.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight knife heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/><br/>split pressure shoe in front of upper tool holder, on tool circle<br/>adjustable and swing away from the tool, pneumatic<br/><br/>pressure after upper tool holder is penetically high-low tactile.<br/>operating switch attached to the pressure. excavation about 10 mm<br/><br/>3. tool holder powerlock / hsk<br/>------------------------------<br/>first right tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/><br/>4. tool holder powerlock / hsk<br/>------------------------------<br/>first left tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>pressure shoe in front of left tool holder, incl. 2 lateral pressure rollers, <br/>sprung<br/><br/>5. tool holder powerlock / hsk<br/>------------------------------<br/>second right tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/><br/>6. tool holder powerlock / hsk<br/>------------------------------<br/>second left tool holder<br/>motor with brake 7.5 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>pressure shoe in front of 2 left tool holder, pneumatic<br/><br/>7. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>engine with brake 11.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight knife heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/><br/>split pressure shoe in front of upper tool holder, on tool circle<br/>adjustable and swing away from the tool, pneumatic<br/><br/>pressure after upper tool holder is penetically high-low tactile.<br/>operating switch attached to the pressure. excavation about 10 mm<br/><br/>8. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>engine with brake 11.0 kw<br/>speed ??8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 140 mm<br/>maximum throat depth 0 mm<br/>chip removal fixed with shims 0,5 mm<br/>adjustment axial 40 mm<br/>adjustment radial<br/>min. tool diameter to the table level 93 mm<br/>max. tool diameter 6 mm below table level 225 mm<br/>table top adjusted before and after lower tool holder for<br/>tool diameter 140 mm (no gaps in the table)<br/><br/>machine operation powercom plus<br/>------------------------------<br/>profile and tool data management software<br/>setting values ??can be calculated or saved.<br/>these are displayed on the digital double displays.<br/>touchscreen - function for graphically supported operation<br/>per 10,000 profile and tool storage locations<br/>profile pictures can be deposited on the profile data<br/>software servicecontrol for maintenance support<br/>integrated network card for connection to opticontrol or other pcs<br/>usb stick for manual data backup<br/>operating and machine data acquisition, incl. length counter<br/>user management with password function<br/>logging production interruptions<br/><br/>machine operation<br/>------------------------------<br/>basic equipment for installation of cnc-controlled adjustment and<br/>positioning<br/><br/>6 axial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with powercom, spindle no. 3,4,5,6,7,8<br/><br/>7 radial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with powercom, spindle no. 2,3,4,5,6,7,8<br/><br/>cnc - controlled adjustment and positioning of the feed<br/>high / low in conjunction with the memory function<br/><br/><br/>feed system<br/>------------------------------<br/>frequency-controlled feed, 5 - 30 m / min.<br/>steplessly adjustable with brake 7.0 kw<br/><br/>feed roller before 1. lower tool<br/>pneumatically controlled high-low<br/><br/>durofer pointed toothed rollers (weinig patent)<br/>with depth limiter and self-cleaning<br/><br/>adjustment of the feed rollers opposite<br/>left tool holder, axial 35 mm<br/><br/>extension of the pendulum axis with respect to the first left tool holder to <br/>150 mm<br/><br/>shafts extended to 220 mm<br/><br/>shortened roller distance compared to the right tools<br/>(or in the area right / inks opposite)<br/><br/>3 additional pendulum axles for aufsteckpendel in the area of ??the right / left<br/>opposite tool holders for workpiece widths:<br/>- 120 and 150 mm<br/>- 180 and 210 mm<br/>- 240 mm<br/><br/>2 vorschbwalzen with collar for aufsteckpendel<br/><br/>additional feed roller in front of the first tool<br/><br/><br/>electrical machinery<br/>------------------------------<br/>operating voltage 400 volts<br/>(voltage range 380 x 420 volts), 50 hz<br/>electrical design according to din vde 0113,<br/>electrical equipment of industrial machinery<br/>en60204, iec-204-1. further electrical regulations<br/>are not included.<br/>control cabinet (with control panel) separate from<br/>machine, distance control cabinet machine: 2.5 m<br/><br/>machine stand, table and stops<br/>------------------------------<br/>dressing table 2 m long (incl.<br/>ruler length extended to 3 m (for better alignment of long parts)<br/>rig with casters<br/>fulcrum adjustment extended 0-15 mm<br/>laser set to stop alignment (color red, laser class 2)<br/><br/>grooved guide for short or difficult-to-reach workpieces, coated with<br/>marathon powercoating. tabletops not removable. including einlegeleiste<br/>for transporting narrow workpieces on the slot guide (min<br/>25mm, chip removal at first lower tool holder max. 7 mm)<br/><br/>5 slot bed inserts opposite the first left tool holder<br/>for workpieces with the cover width:<br/>- 120mm, -150mm, -180mm, -210mm, - 240mm<br/><br/>5 nutenbetteinlagen opposite the right / left opposite<br/>tool holder for workpieces with the cover width:<br/>- 120mm, -150mm, -180mm, -210mm, - 240mm<br/><br/><br/>automatic lubricant pump for removing water from the groove guide.<br/><br/>a driven roller in the exit table, 210 mm wide, hardened<br/><br/>two driven rollers in the machine table and a sliding roller<br/>to the right / left opposite tool holder, 210 mm wide, hardened.<br/><br/>pressure rollers and guides<br/>------------------------------<br/>pressure rollers from above, sprung<br/>lateral pressure roller on infeed table, sprung<br/><br/>safety and sound insulation<br/>------------------------------<br/>safety - full fairing<br/>easily foldable safety hood with window covers<br/>the entire work area and protects against mechanical<br/>hazards.<br/>when lifting the safety hood tool holders<br/>and feed automatically switched off.<br/>for ce version, the safety cover is opened during<br/>of automatic mode not possible.<br/>electromagnetic locking of the safety hood<br/>(only after the tools have come to a standstill, approx. 15 seconds,<br/>can the hood be opened)<br/>the machine comes with ce mark and its associated<br/>ec declaration of conformity delivered.<br/>two interior lights in the safety hood<br/>for ripping works e.g. sawing and multiple profiling,<br/>you need suitable protection devices.<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 8 ST.
WORKING WIDTH: 260 MM
WORKING HEIGHT: 160 MM
LENGTH OF THE PLANING TABLE: 2000 MM
FEED MOTOR: 7 KW
FEED SPEED: 5-30 M/MIN.
DIMENSIONS (L/W/H): 5700X2100X1740 MM
WEIGHT OF THE MACHINE CA.: 5000 KG
CONTROL: WEINIG POWERCOM
WEINIG POWERMAT 1000 CNC, YEAR 2012
-------------------------------

EXECUTIVE SUMMARY:
-------------------------------
8 SPINDLES
HSK / POWERLOCK
LARGE POWERCOM CONTROLLER
GROOVED
AXIAL AND AXIAL AXES CNC CONTROLLED

DETAILED DESCRIPTION:
-------------------------------

TECHNICAL SPECIFICATIONS:
-------------------------------
WORKING WIDTH MAX. 260 MM
WORKING HEIGHT MAX. 160 MM

1. TOOL HOLDER
-------------------------------
FIRST LOWER TOOL HOLDER
ENGINE WITH BRAKE 15.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 125 - 180 MM
IN CONJUNCTION WITH POWERLOCK 93 - 180 MM
TOOL CIRCLE FOLD CUTTERS 130-160 MM
ADJUSTMENT AXIAL 17 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
MARATHONCOATING IN FRONT OF 1ST LOWER TOOL HOLDER

2. TOOL HOLDER POWERLOCK / HSK
-------------------------------
FIRST UPPER TOOL HOLDER
ENGINE WITH BRAKE 15.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT KNIFE HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM

SPLIT PRESSURE SHOE IN FRONT OF UPPER TOOL HOLDER, ON TOOL CIRCLE
ADJUSTABLE AND SWING AWAY FROM THE TOOL, PNEUMATIC

PRESSURE AFTER UPPER TOOL HOLDER IS PENETICALLY HIGH-LOW TACTILE.
OPERATING SWITCH ATTACHED TO THE PRESSURE. EXCAVATION ABOUT 10 MM

3. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM

4. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
PRESSURE SHOE IN FRONT OF LEFT TOOL HOLDER, INCL. 2 LATERAL PRESSURE ROLLERS,
SPRUNG

5. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM

6. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
PRESSURE SHOE IN FRONT OF 2 LEFT TOOL HOLDER, PNEUMATIC

7. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
ENGINE WITH BRAKE 11.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT KNIFE HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM

SPLIT PRESSURE SHOE IN FRONT OF UPPER TOOL HOLDER, ON TOOL CIRCLE
ADJUSTABLE AND SWING AWAY FROM THE TOOL, PNEUMATIC

PRESSURE AFTER UPPER TOOL HOLDER IS PENETICALLY HIGH-LOW TACTILE.
OPERATING SWITCH ATTACHED TO THE PRESSURE. EXCAVATION ABOUT 10 MM

8. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
ENGINE WITH BRAKE 11.0 KW
SPEED ??8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 140 MM
MAXIMUM THROAT DEPTH 0 MM
CHIP REMOVAL FIXED WITH SHIMS 0,5 MM
ADJUSTMENT AXIAL 40 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER TO THE TABLE LEVEL 93 MM
MAX. TOOL DIAMETER 6 MM BELOW TABLE LEVEL 225 MM
TABLE TOP ADJUSTED BEFORE AND AFTER LOWER TOOL HOLDER FOR
TOOL DIAMETER 140 MM (NO GAPS IN THE TABLE)

MACHINE OPERATION POWERCOM PLUS
------------------------------
PROFILE AND TOOL DATA MANAGEMENT SOFTWARE
SETTING VALUES ??CAN BE CALCULATED OR SAVED.
THESE ARE DISPLAYED ON THE DIGITAL DOUBLE DISPLAYS.
TOUCHSCREEN - FUNCTION FOR GRAPHICALLY SUPPORTED OPERATION
PER 10,000 PROFILE AND TOOL STORAGE LOCATIONS
PROFILE PICTURES CAN BE DEPOSITED ON THE PROFILE DATA
SOFTWARE SERVICECONTROL FOR MAINTENANCE SUPPORT
INTEGRATED NETWORK CARD FOR CONNECTION TO OPTICONTROL OR OTHER PCS
USB STICK FOR MANUAL DATA BACKUP
OPERATING AND MACHINE DATA ACQUISITION, INCL. LENGTH COUNTER
USER MANAGEMENT WITH PASSWORD FUNCTION
LOGGING PRODUCTION INTERRUPTIONS

MACHINE OPERATION
------------------------------
BASIC EQUIPMENT FOR INSTALLATION OF CNC-CONTROLLED ADJUSTMENT AND
POSITIONING

6 AXIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH POWERCOM, SPINDLE NO. 3,4,5,6,7,8

7 RADIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH POWERCOM, SPINDLE NO. 2,3,4,5,6,7,8

CNC - CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED
HIGH / LOW IN CONJUNCTION WITH THE MEMORY FUNCTION


FEED SYSTEM
------------------------------
FREQUENCY-CONTROLLED FEED, 5 - 30 M / MIN.
STEPLESSLY ADJUSTABLE WITH BRAKE 7.0 KW

FEED ROLLER BEFORE 1. LOWER TOOL
PNEUMATICALLY CONTROLLED HIGH-LOW

DUROFER POINTED TOOTHED ROLLERS (WEINIG PATENT)
WITH DEPTH LIMITER AND SELF-CLEANING

ADJUSTMENT OF THE FEED ROLLERS OPPOSITE
LEFT TOOL HOLDER, AXIAL 35 MM

EXTENSION OF THE PENDULUM AXIS WITH RESPECT TO THE FIRST LEFT TOOL HOLDER TO
150 MM

SHAFTS EXTENDED TO 220 MM

SHORTENED ROLLER DISTANCE COMPARED TO THE RIGHT TOOLS
(OR IN THE AREA RIGHT / INKS OPPOSITE)

3 ADDITIONAL PENDULUM AXLES FOR AUFSTECKPENDEL IN THE AREA OF ??THE RIGHT / LEFT
OPPOSITE TOOL HOLDERS FOR WORKPIECE WIDTHS:
- 120 AND 150 MM
- 180 AND 210 MM
- 240 MM

2 VORSCHBWALZEN WITH COLLAR FOR AUFSTECKPENDEL

ADDITIONAL FEED ROLLER IN FRONT OF THE FIRST TOOL


ELECTRICAL MACHINERY
------------------------------
OPERATING VOLTAGE 400 VOLTS
(VOLTAGE RANGE 380 X 420 VOLTS), 50 HZ
ELECTRICAL DESIGN ACCORDING TO DIN VDE 0113,
ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINERY
EN60204, IEC-204-1. FURTHER ELECTRICAL REGULATIONS
ARE NOT INCLUDED.
CONTROL CABINET (WITH CONTROL PANEL) SEPARATE FROM
MACHINE, DISTANCE CONTROL CABINET MACHINE: 2.5 M

MACHINE STAND, TABLE AND STOPS
------------------------------
DRESSING TABLE 2 M LONG (INCL.
RULER LENGTH EXTENDED TO 3 M (FOR BETTER ALIGNMENT OF LONG PARTS)
RIG WITH CASTERS
FULCRUM ADJUSTMENT EXTENDED 0-15 MM
LASER SET TO STOP ALIGNMENT (COLOR RED, LASER CLASS 2)

GROOVED GUIDE FOR SHORT OR DIFFICULT-TO-REACH WORKPIECES, COATED WITH
MARATHON POWERCOATING. TABLETOPS NOT REMOVABLE. INCLUDING EINLEGELEISTE
FOR TRANSPORTING NARROW WORKPIECES ON THE SLOT GUIDE (MIN
25MM, CHIP REMOVAL AT FIRST LOWER TOOL HOLDER MAX. 7 MM)

5 SLOT BED INSERTS OPPOSITE THE FIRST LEFT TOOL HOLDER
FOR WORKPIECES WITH THE COVER WIDTH:
- 120MM, -150MM, -180MM, -210MM, - 240MM

5 NUTENBETTEINLAGEN OPPOSITE THE RIGHT / LEFT OPPOSITE
TOOL HOLDER FOR WORKPIECES WITH THE COVER WIDTH:
- 120MM, -150MM, -180MM, -210MM, - 240MM


AUTOMATIC LUBRICANT PUMP FOR REMOVING WATER FROM THE GROOVE GUIDE.

A DRIVEN ROLLER IN THE EXIT TABLE, 210 MM WIDE, HARDENED

TWO DRIVEN ROLLERS IN THE MACHINE TABLE AND A SLIDING ROLLER
TO THE RIGHT / LEFT OPPOSITE TOOL HOLDER, 210 MM WIDE, HARDENED.

PRESSURE ROLLERS AND GUIDES
------------------------------
PRESSURE ROLLERS FROM ABOVE, SPRUNG
LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG

SAFETY AND SOUND INSULATION
------------------------------
SAFETY - FULL FAIRING
EASILY FOLDABLE SAFETY HOOD WITH WINDOW COVERS
THE ENTIRE WORK AREA AND PROTECTS AGAINST MECHANICAL
HAZARDS.
WHEN LIFTING THE SAFETY HOOD TOOL HOLDERS
AND FEED AUTOMATICALLY SWITCHED OFF.
FOR CE VERSION, THE SAFETY COVER IS OPENED DURING
OF AUTOMATIC MODE NOT POSSIBLE.
ELECTROMAGNETIC LOCKING OF THE SAFETY HOOD
(ONLY AFTER THE TOOLS HAVE COME TO A STANDSTILL, APPROX. 15 SECONDS,
CAN THE HOOD BE OPENED)
THE MACHINE COMES WITH CE MARK AND ITS ASSOCIATED
EC DECLARATION OF CONFORMITY DELIVERED.
TWO INTERIOR LIGHTS IN THE SAFETY HOOD
FOR RIPPING WORKS E.G. SAWING AND MULTIPLE PROFILING,
YOU NEED SUITABLE PROTECTION DEVICES.


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-
1 compressor

make:sinil(korea)

year:1995

press: 25.0kg/?

 cap': 13.5?/min

 motor:125hp

 

 2 compressor

make:sinil(korea)

year:1995

press: 25.0kg/?

 cap':6?/min

 motor:60hp

 

3. blow molding machine x2sets

make:nissei(japan)

year:1995

model: asb - 650nh2

one stage biaxial

 orlentation stretch

pet reisn dryer?hopper:1set

  100kg/hr,

 mold dehunidifyer:1set

mold chilling:1set 

 

4 blow molding machine

make:nissei(japan)

year:1994

model: asb - 650nh

one stage biaxial

orlentation stretch

pet reisn dryer?hopper:1set

mold dehunidifyer:1set 

mold chilling:

 

 8 crusher

 make:daehung(korea)

 motor:20hp
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

 1 COMPRESSOR MAKE:SINIL(KOREA) YEAR:1995 PRESS: 25.0KG/? CAP': 13.5?/MIN MOTOR:125HP 2 COMPRESSOR MAKE:SINIL(KOREA) YEAR:1995 PRESS: 25.0KG/? CAP':6?/MIN MOTOR:60HP 3. BLOW MOLDING MACHINE X2SETS MAKE:NISSEI(JAPAN) YEAR:1995 MODEL: ASB - 650NH2 ONE STAGE BIAXIAL ORLENTATION STRETCH PET REISN DRYER?HOPPER:1SET 100KG/HR, MOLD DEHUNIDIFYER:1SET MOLD CHILLING:1SET 4 BLOW MOLDING MACHINE MAKE:NISSEI(JAPAN) YEAR:1994 MODEL: ASB - 650NH ONE STAGE BIAXIAL ORLENTATION STRETCH PET REISN DRYER?HOPPER:1SET MOLD DEHUNIDIFYER:1SET MOLD CHILLING: 8 CRUSHER MAKE:DAEHUNG(KOREA) MOTOR:20HP BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 5200 kg<br/>dimensions (l x w x h) approx.: 4000 x 3500 x 2600 mm<br/>description: supfina 807 d4 f2 nc superfinishing machine<br> <br> - workpiece diameter: 45 mm<br> - workpiece length: 65 mm<br> - electrically interlocked at: 100 a<br> - total power requirement: 10 kw<br> - was used with soading system (not available!)<br> - oil coolant system with magnetic cylinder separator<br> <br> suitable for finishing the flat surfaces of two planetary gears in one clamping operation with two axial grinding motors WEIGHT APPROX.: 5200 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 3500 X 2600 MM
DESCRIPTION: SUPFINA 807 D4 F2 NC SUPERFINISHING MACHINE

- WORKPIECE DIAMETER: 45 MM
- WORKPIECE LENGTH: 65 MM
- ELECTRICALLY INTERLOCKED AT: 100 A
- TOTAL POWER REQUIREMENT: 10 KW
- WAS USED WITH SOADING SYSTEM (NOT AVAILABLE!)
- OIL COOLANT SYSTEM WITH MAGNETIC CYLINDER SEPARATOR

SUITABLE FOR FINISHING THE FLAT SURFACES OF TWO PLANETARY GEARS IN ONE CLAMPING OPERATION WITH TWO AXIAL GRINDING MOTORS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-operating hours: 7430 h	
control system:	
siemens sinumerik system 3	
cutter diameter: 163 mm	
milling width: 230 mm	
speed: 120-140 / min	
axial feed: 1-1000 mm / min	
radial feed: 1-600 mm / min	
center distance milling and clamping spindle: 40-265 mm	
adjustability: 170 mm	
swivel range for milling carriage: 90 ° max.	
machine dimensions:	
5260 x 4025 x 2580 mm	
machine weight: 10000 kg	
accessories:	
bending mandrel	
2 milling cabinets	
and another accessories   OPERATING HOURS: 7430 H CONTROL SYSTEM: SIEMENS SINUMERIK SYSTEM 3 CUTTER DIAMETER: 163 MM MILLING WIDTH: 230 MM SPEED: 120-140 / MIN AXIAL FEED: 1-1000 MM / MIN RADIAL FEED: 1-600 MM / MIN CENTER DISTANCE MILLING AND CLAMPING SPINDLE: 40-265 MM ADJUSTABILITY: 170 MM SWIVEL RANGE FOR MILLING CARRIAGE: 90 ° MAX. MACHINE DIMENSIONS: 5260 X 4025 X 2580 MM MACHINE WEIGHT: 10000 KG ACCESSORIES: BENDING MANDREL 2 MILLING CABINETS AND ANOTHER ACCESSORIES
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 180 mm<br/>gear width: 200 mm<br/>max. module: 3 <br/>control: bwo 785 <br/>max. cutter dia. spur gears: 180 mm<br/>max. cutter width spur gears: 200 mm<br/>min. number of teeth: 1 <br/>working spindle: din 2080 <br/>speeds infinitely variable range 1: 0 - 450 u/min<br/>speeds infinitely variable range 2: 400 - 3000 u/min<br/>tool adaptor: sk 30 <br/>max. milling cutter diameter: 80 mm<br/>cutter width - max.: 130 mm<br/>spindle stroke - max.: 100 mm<br/>spindle bore: 60 mm<br/>swivelability of the slide: +/- 45 °<br/>feed speeds of the slide: 0 - 3000 mm/min<br/>total power requirement: 20 kw<br/>weight of the machine ca.: 4,4 t<br/>equipment/accessories:<br/>- milling modes: radial, axial, tangential und combinations<br/>- milling head: type 2051<br/>- oil mist separator<br/>- total switch-off<br/>- deburring-worm gear<br/>- paper band filter<br/>- automatic orientation for skive hobbing<br/>- automatic workpiece loading <br/>- incl. cutter arbors + tapers 8 / 10 / 13 / 16 und 22<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 180 MM
GEAR WIDTH: 200 MM
MAX. MODULE: 3
CONTROL: BWO 785
MAX. CUTTER DIA. SPUR GEARS: 180 MM
MAX. CUTTER WIDTH SPUR GEARS: 200 MM
MIN. NUMBER OF TEETH: 1
WORKING SPINDLE: DIN 2080
SPEEDS INFINITELY VARIABLE RANGE 1: 0 - 450 U/MIN
SPEEDS INFINITELY VARIABLE RANGE 2: 400 - 3000 U/MIN
TOOL ADAPTOR: SK 30
MAX. MILLING CUTTER DIAMETER: 80 MM
CUTTER WIDTH - MAX.: 130 MM
SPINDLE STROKE - MAX.: 100 MM
SPINDLE BORE: 60 MM
SWIVELABILITY OF THE SLIDE: +/- 45 °
FEED SPEEDS OF THE SLIDE: 0 - 3000 MM/MIN
TOTAL POWER REQUIREMENT: 20 KW
WEIGHT OF THE MACHINE CA.: 4,4 T
EQUIPMENT/ACCESSORIES:
- MILLING MODES: RADIAL, AXIAL, TANGENTIAL UND COMBINATIONS
- MILLING HEAD: TYPE 2051
- OIL MIST SEPARATOR
- TOTAL SWITCH-OFF
- DEBURRING-WORM GEAR
- PAPER BAND FILTER
- AUTOMATIC ORIENTATION FOR SKIVE HOBBING
- AUTOMATIC WORKPIECE LOADING
- INCL. CUTTER ARBORS + TAPERS 8 / 10 / 13 / 16 UND 22




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-roto t 2/96
the rotary automatic molding machine on 96 stations for casting of polymeric traffic jams of the made foam structure (for wines and for hard alcoholic beverages), capable to work at the same time with 2 various materials / colors
eqb8ve2
main technical characteristics â?¢ a rotary table with 48 workstations in two levels, everyone with a double holder â?¢ holders with linear + rotary pneumatic opening / closing, calculated on 96 single compression arnold from stainless steel, with a possibility of easy replacement. 
â?¢ electric drives of rotation of screws with inverter; 
â?¢ 2 independent knots of injection, transfer system;
â?¢ injection with the help of hydraulic accumulator;
â?¢ proportional speed control of injection;
â?¢ manual adjustment of counter-pressure;
â?¢ contour of cooling of forms;
â?¢ sensor of check of removal of ingates and traffic jams with the alarm system.
â?¢ pneumatic system of removal of traffic jams and separate unloading of traffic jams on the one hand;
â?¢ pneumatic removal of ingates;
â?¢ a possibility with axial shift of positioning of inserts. 

main specifications
number of stations 96 number of knots of injection 2
number of places in a form 1
diameter of the screw diameter is 36 mm
relation of l/d 21
the theoretical volume of injection is 2 x 19.1 cm3
the actual weight of injection is 2 x 14.5 g
adjustable speed of the screw is 10-280 rpm.
capacities
of the screw of 10.4 (5, 2 x 2) kw engine of the pump engine of 15 kw
electroheating of 12.8 (6, 4 x 2) kw cooling of forms of 0.95 kw
the engine of rotation of a table of general 0.75 kw rated capacity is 22 kw
average power consumption is 18 kw (by production of 3,000-4,000 stopper in on the hour)
production characteristics
at the same time cast models 2
at the same time cast colors 2
the minimum number of forms for change of model 48
the maximum diameter of a stopper is 30 mm
the maximum length of a stopper is 46 mm
admission of distinction of weight of each stopper: + / - 0.1 g
maximum weight of at ingate: 0.1 / 0.2 g productivity
settlement productivity is 2,000 to 3,000 of pieces of wine traffic jams or 2,200 2,800 t-shaped stoppers on hour.
 ROTO T 2/96 THE ROTARY AUTOMATIC MOLDING MACHINE ON 96 STATIONS FOR CASTING OF POLYMERIC TRAFFIC JAMS OF THE MADE FOAM STRUCTURE (FOR WINES AND FOR HARD ALCOHOLIC BEVERAGES), CAPABLE TO WORK AT THE SAME TIME WITH 2 VARIOUS MATERIALS / COLORS EQB8VE2 MAIN TECHNICAL CHARACTERISTICS &ACIRC;?&CENT; A ROTARY TABLE WITH 48 WORKSTATIONS IN TWO LEVELS, EVERYONE WITH A DOUBLE HOLDER &ACIRC;?&CENT; HOLDERS WITH LINEAR + ROTARY PNEUMATIC OPENING / CLOSING, CALCULATED ON 96 SINGLE COMPRESSION ARNOLD FROM STAINLESS STEEL, WITH A POSSIBILITY OF EASY REPLACEMENT. &ACIRC;?&CENT; ELECTRIC DRIVES OF ROTATION OF SCREWS WITH INVERTER; &ACIRC;?&CENT; 2 INDEPENDENT KNOTS OF INJECTION, TRANSFER SYSTEM; &ACIRC;?&CENT; INJECTION WITH THE HELP OF HYDRAULIC ACCUMULATOR; &ACIRC;?&CENT; PROPORTIONAL SPEED CONTROL OF INJECTION; &ACIRC;?&CENT; MANUAL ADJUSTMENT OF COUNTER-PRESSURE; &ACIRC;?&CENT; CONTOUR OF COOLING OF FORMS; &ACIRC;?&CENT; SENSOR OF CHECK OF REMOVAL OF INGATES AND TRAFFIC JAMS WITH THE ALARM SYSTEM. &ACIRC;?&CENT; PNEUMATIC SYSTEM OF REMOVAL OF TRAFFIC JAMS AND SEPARATE UNLOADING OF TRAFFIC JAMS ON THE ONE HAND; &ACIRC;?&CENT; PNEUMATIC REMOVAL OF INGATES; &ACIRC;?&CENT; A POSSIBILITY WITH AXIAL SHIFT OF POSITIONING OF INSERTS. MAIN SPECIFICATIONS NUMBER OF STATIONS 96 NUMBER OF KNOTS OF INJECTION 2 NUMBER OF PLACES IN A FORM 1 DIAMETER OF THE SCREW DIAMETER IS 36 MM RELATION OF L/D 21 THE THEORETICAL VOLUME OF INJECTION IS 2 X 19.1 CM3 THE ACTUAL WEIGHT OF INJECTION IS 2 X 14.5 G ADJUSTABLE SPEED OF THE SCREW IS 10-280 RPM. CAPACITIES OF THE SCREW OF 10.4 (5, 2 X 2) KW ENGINE OF THE PUMP ENGINE OF 15 KW ELECTROHEATING OF 12.8 (6, 4 X 2) KW COOLING OF FORMS OF 0.95 KW THE ENGINE OF ROTATION OF A TABLE OF GENERAL 0.75 KW RATED CAPACITY IS 22 KW AVERAGE POWER CONSUMPTION IS 18 KW (BY PRODUCTION OF 3,000-4,000 STOPPER IN ON THE HOUR) PRODUCTION CHARACTERISTICS AT THE SAME TIME CAST MODELS 2 AT THE SAME TIME CAST COLORS 2 THE MINIMUM NUMBER OF FORMS FOR CHANGE OF MODEL 48 THE MAXIMUM DIAMETER OF A STOPPER IS 30 MM THE MAXIMUM LENGTH OF A STOPPER IS 46 MM ADMISSION OF DISTINCTION OF WEIGHT OF EACH STOPPER: + / - 0.1 G MAXIMUM WEIGHT OF AT INGATE: 0.1 / 0.2 G PRODUCTIVITY SETTLEMENT PRODUCTIVITY IS 2,000 TO 3,000 OF PIECES OF WINE TRAFFIC JAMS OR 2,200 2,800 T-SHAPED STOPPERS ON HOUR.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 120 x 200 x 100 mm<br/>description: identification code 1178406013. never used. see photo WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 120 X 200 X 100 MM
DESCRIPTION: IDENTIFICATION CODE 1178406013. NEVER USED. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-333mw and 339mw gas turbine power plants(50hz)
(1) 333mw gas turbine power plant(50hz)
type: simple cycle type(there is no steam turbine)
capacity: 333mw
frequency: 50 hz
manufacturer: mitsubishi(japan)
manufacturing year: 2011
commissioning year: 2012
stop year: 2014
model: 701f4
fuel: dual type (gas or diesel)
heat efficiency: 41.9% lhv
lhv heat rate: 8592kj/kwh
8144btu/kwh
exaust flow: 748kg / s
inlet temperature: 1400 degree
exaust temperature: 630 degree
rated speed: 3000rpm
exaust nox: 25ppm@15%o2
exaust co: 10ppm@15%o2
turn down load: 45%
ramp rate: 38/min.
gas turbine size: osteo. (lwh) = 14.3 x 5.8 x 6.1 m
approx. weight: 415ton

(turbine)
type: axial flow type
lol of stages: 4
lol of rotor: 1
(compressor)
type: axial flow type
no.of stages: 17
no.of bleed: 3
(combustor)
type: multi-can-annular type
lol of combustor: 20
cooling type: air cooled
(2) 339mw gas turbine power plant(50hz)
type: simple cycle type(there is no steam turbine)
capacity: 339mw
frequency: 50 hz
manufacturer: mitsubishi(japan)
manufacturing year: 2011
commissioning year: 2012
stop year: 2015
model: 701f4
fuel: gas

heat efficiency: 41.9% lhv
lhv heat rate: 8592kj/kwh
8144btu/kwh
exaust flow: 748kg / s
inlet temperature: 1400 degree
exaust temperature: 630 degree
rated speed: 3000rpm
exaust nox: 25ppm@15%o2
exaust co: 10ppm@15%o2
turn down load: 45%
ramp rate: 38/min.
gas turbine size: osteo. (lwh) = 14.3 x 5.8 x 6.1 m
approx. weight: 415ton
(turbine)
type: axial flow type
lol of stages: 4
lol of rotor: 1
(compressor)
type: axial flow type
no.of stages: 17
no.of bleed: 3
(combustor)
type: multi-can-annular type
lol of combustor: 20
cooling type: air cooled 333MW AND 339MW GAS TURBINE POWER PLANTS(50HZ) (1) 333MW GAS TURBINE POWER PLANT(50HZ) TYPE: SIMPLE CYCLE TYPE(THERE IS NO STEAM TURBINE) CAPACITY: 333MW FREQUENCY: 50 HZ MANUFACTURER: MITSUBISHI(JAPAN) MANUFACTURING YEAR: 2011 COMMISSIONING YEAR: 2012 STOP YEAR: 2014 MODEL: 701F4 FUEL: DUAL TYPE (GAS OR DIESEL) HEAT EFFICIENCY: 41.9% LHV LHV HEAT RATE: 8592KJ/KWH 8144BTU/KWH EXAUST FLOW: 748KG / S INLET TEMPERATURE: 1400 DEGREE EXAUST TEMPERATURE: 630 DEGREE RATED SPEED: 3000RPM EXAUST NOX: 25PPM@15%O2 EXAUST CO: 10PPM@15%O2 TURN DOWN LOAD: 45% RAMP RATE: 38/MIN. GAS TURBINE SIZE: OSTEO. (LWH) = 14.3 X 5.8 X 6.1 M APPROX. WEIGHT: 415TON (TURBINE) TYPE: AXIAL FLOW TYPE LOL OF STAGES: 4 LOL OF ROTOR: 1 (COMPRESSOR) TYPE: AXIAL FLOW TYPE NO.OF STAGES: 17 NO.OF BLEED: 3 (COMBUSTOR) TYPE: MULTI-CAN-ANNULAR TYPE LOL OF COMBUSTOR: 20 COOLING TYPE: AIR COOLED (2) 339MW GAS TURBINE POWER PLANT(50HZ) TYPE: SIMPLE CYCLE TYPE(THERE IS NO STEAM TURBINE) CAPACITY: 339MW FREQUENCY: 50 HZ MANUFACTURER: MITSUBISHI(JAPAN) MANUFACTURING YEAR: 2011 COMMISSIONING YEAR: 2012 STOP YEAR: 2015 MODEL: 701F4 FUEL: GAS HEAT EFFICIENCY: 41.9% LHV LHV HEAT RATE: 8592KJ/KWH 8144BTU/KWH EXAUST FLOW: 748KG / S INLET TEMPERATURE: 1400 DEGREE EXAUST TEMPERATURE: 630 DEGREE RATED SPEED: 3000RPM EXAUST NOX: 25PPM@15%O2 EXAUST CO: 10PPM@15%O2 TURN DOWN LOAD: 45% RAMP RATE: 38/MIN. GAS TURBINE SIZE: OSTEO. (LWH) = 14.3 X 5.8 X 6.1 M APPROX. WEIGHT: 415TON (TURBINE) TYPE: AXIAL FLOW TYPE LOL OF STAGES: 4 LOL OF ROTOR: 1 (COMPRESSOR) TYPE: AXIAL FLOW TYPE NO.OF STAGES: 17 NO.OF BLEED: 3 (COMBUSTOR) TYPE: MULTI-CAN-ANNULAR TYPE LOL OF COMBUSTOR: 20 COOLING TYPE: AIR COOLED
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 4 kg<br/>dimensions (l x w x h) approx.: 250 x 120 x 100 mm<br/>description: identification code 1168404000a0030. never used. see photo WEIGHT APPROX.: 4 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 120 X 100 MM
DESCRIPTION: IDENTIFICATION CODE 1168404000A0030. NEVER USED. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-indexing plate slots: 12, chuck diameter: 3x 8mm, 1x 6mm, controls: siemens coros op15, pneumatic feeder with additional hydraulic clamping, cam-controlled units, cut-off saw with circular saw blade, 2x radial quill units, 2x radial thread drilling units, 2x radial screw units with controls haba, 5x axial quill units for drilling and milling, 1x piercing unit, cooling system with chip conveyor knoll and bar loader iemca.  INDEXING PLATE SLOTS: 12, CHUCK DIAMETER: 3X 8MM, 1X 6MM, CONTROLS: SIEMENS COROS OP15, PNEUMATIC FEEDER WITH ADDITIONAL HYDRAULIC CLAMPING, CAM-CONTROLLED UNITS, CUT-OFF SAW WITH CIRCULAR SAW BLADE, 2X RADIAL QUILL UNITS, 2X RADIAL THREAD DRILLING UNITS, 2X RADIAL SCREW UNITS WITH CONTROLS HABA, 5X AXIAL QUILL UNITS FOR DRILLING AND MILLING, 1X PIERCING UNIT, COOLING SYSTEM WITH CHIP CONVEYOR KNOLL AND BAR LOADER IEMCA.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 4 kg<br/>dimensions (l x w x h) approx.: 250 x 120 x 100 mm<br/>description: identification code 1168403002t0112. never used. see photo WEIGHT APPROX.: 4 KG
DIMENSIONS (L X W X H) APPROX.: 250 X 120 X 100 MM
DESCRIPTION: IDENTIFICATION CODE 1168403002T0112. NEVER USED. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-a parte various new fans and fan.
further details on request.
price on request!
 A PARTE VARIOUS NEW FANS AND FAN. FURTHER DETAILS ON REQUEST. PRICE ON REQUEST!
Vendedor: Vimesco GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 240 kg<br/>dimensions (l x w x h) approx.: 1400x800x600 mm<br/>description: connection pn 16, control pressure min. 30 bar, max. 60 bar WEIGHT APPROX.: 240 KG
DIMENSIONS (L X W X H) APPROX.: 1400X800X600 MM
DESCRIPTION: CONNECTION PN 16, CONTROL PRESSURE MIN. 30 BAR, MAX. 60 BAR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-new solar titanium 130 natural gas turbine power plants.
rated at 15000kw, 11, 000v, 6 wire, 3 phase, 4 wire, 17.1: 1 ratio. year 2012, units have zero hours since new. complete with 14 stage axial compressor, emission solonox injectors, combustion chamber and single torch ignition system, synchronous generator end with permanent magnet generator exciter, steel base frame with drip pans, integrated lube oil system, air inlet, exhaust system, turbine compressor cleaning system, 120 volt battery / battery charger, turbotronic 4 skid on gas turbine and generator control system and fuel filter. air intake, exhaust filtering and duel fuel available at at additional cost. price per unit. please call for more details. 
make: solarmodel: titanium 130item #: 16762year: 2012hours: 0 since new fuel: natural gashertz: 50 hz kw: 15000 voltage: 11000 portable: no. enclosed: yes NEW SOLAR TITANIUM 130 NATURAL GAS TURBINE POWER PLANTS. RATED AT 15000KW, 11, 000V, 6 WIRE, 3 PHASE, 4 WIRE, 17.1: 1 RATIO. YEAR 2012, UNITS HAVE ZERO HOURS SINCE NEW. COMPLETE WITH 14 STAGE AXIAL COMPRESSOR, EMISSION SOLONOX INJECTORS, COMBUSTION CHAMBER AND SINGLE TORCH IGNITION SYSTEM, SYNCHRONOUS GENERATOR END WITH PERMANENT MAGNET GENERATOR EXCITER, STEEL BASE FRAME WITH DRIP PANS, INTEGRATED LUBE OIL SYSTEM, AIR INLET, EXHAUST SYSTEM, TURBINE COMPRESSOR CLEANING SYSTEM, 120 VOLT BATTERY / BATTERY CHARGER, TURBOTRONIC 4 SKID ON GAS TURBINE AND GENERATOR CONTROL SYSTEM AND FUEL FILTER. AIR INTAKE, EXHAUST FILTERING AND DUEL FUEL AVAILABLE AT AT ADDITIONAL COST. PRICE PER UNIT. PLEASE CALL FOR MORE DETAILS. MAKE: SOLARMODEL: TITANIUM 130ITEM #: 16762YEAR: 2012HOURS: 0 SINCE NEW FUEL: NATURAL GASHERTZ: 50 HZ KW: 15000 VOLTAGE: 11000 PORTABLE: NO. ENCLOSED: YES
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 800 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 300 x 300 x 400 mm<br/>description: never used. see photos WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 300 X 400 MM
DESCRIPTION: NEVER USED. SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-positioning and control heidenhain tnc 121
work paths x/y/z 1.950 mm / 1.600 mm / 1.250 mm
adjustment of spindle axial w 800 mm
table rotation b > 360°
table positioning 4 x 90°
table size 1.400 mm x 1.600 mm
largest plant mass at uniform load distribution 6,3 t
tool mounting taper iso 50
spindle speeds 5.6 - 1,120 rpm
main drive 15 kw 
footprint 5.2 m x 6.45 m
machine height 4.24 m
machine weight 25.3 t 
    POSITIONING AND CONTROL HEIDENHAIN TNC 121 WORK PATHS X/Y/Z 1.950 MM / 1.600 MM / 1.250 MM ADJUSTMENT OF SPINDLE AXIAL W 800 MM TABLE ROTATION B > 360° TABLE POSITIONING 4 X 90° TABLE SIZE 1.400 MM X 1.600 MM LARGEST PLANT MASS AT UNIFORM LOAD DISTRIBUTION 6,3 T TOOL MOUNTING TAPER ISO 50 SPINDLE SPEEDS 5.6 - 1,120 RPM MAIN DRIVE 15 KW FOOTPRINT 5.2 M X 6.45 M MACHINE HEIGHT 4.24 M MACHINE WEIGHT 25.3 T
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1450 x 1650 x 1950 mm<br/>description: serial number 040212002, round tube cutting capacity 280 mm, square tube cutting capacity 250 mm, swiveable from -45º to +60º, saw width 25 mm, motor power 1,3 kw - 1430 rpm, for further information see photos. WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1450 X 1650 X 1950 MM
DESCRIPTION: SERIAL NUMBER 040212002, ROUND TUBE CUTTING CAPACITY 280 MM, SQUARE TUBE CUTTING CAPACITY 250 MM, SWIVEABLE FROM -45º TO +60º, SAW WIDTH 25 MM, MOTOR POWER 1,3 KW - 1430 RPM, FOR FURTHER INFORMATION SEE PHOTOS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-contact:
englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  CONTACT: ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-number of spindles: 6 st.<br/>working width: 20-260 mm<br/>working height: 10-160 mm<br/>length of the planing table: 2500 mm<br/>feed motor: 4 kw<br/>feed speed: 5-30 m/min.<br/>control: cnc <br/>turning speeds: 8000 u/min<br/>weinig powermat 600 for window production as new, year 2014<br/>----------------------------------------------------------------<br/><br/>executive summary:<br/>----------------------------------------------------------------<br/>working width: 20-260 mm<br/>working height: 10 - 160 mm<br/>6 spindles (bottom, right, left, top, top, bottom)<br/>8,000 rpm<br/>5 x hsk / powerlock<br/>window package with glazing bead removal<br/>spindles axial and radial cnc controlled<br/>large control powercom plus with touchscreen<br/><br/>detailed description:<br/>----------------------------------------------------------------<br/><br/>technical specifications:<br/>-------------------------<br/>working width 20 - 260 mm (with tool circle 93 - 125 mm)<br/>working height 10 - 160 mm (with tool circle 93 - 125 mm)<br/><br/>1st spindle<br/>------------------------------<br/>first lower horizontal spindle<br/>engine 7.5 kw<br/>diameter 40 mm<br/>speed 6,000 rpm<br/>tool flight circle 125 - 145 mm<br/>in conjunction with powerlock 93 - 180 mm<br/>tool circle fold cutters 130-160 mm<br/>adjustment axial 5 mm<br/>folding device, including rebate cutter<br/>marathoncoating in front of 1st lower spindle<br/><br/>2. tool holder powerlock / hsk<br/>------------------------------<br/>first right tool holder<br/>motor, together with left vertical spindle 15 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 40 mm below table level 93 - 200 mm<br/>tool circle 55 mm below table level 93 - 180 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>max. tool diameter behind stop level 180 mm<br/>right spindle motorized axial (55mm),<br/>max. saw blade diameter 180 mm<br/>radial cnc controlled<br/><br/>3. tool holder powerlock / hsk<br/>------------------------------<br/>first left tool holder<br/>single motor with 1st right vertical spindle<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 40 mm below table level 93 - 200 mm<br/>tool circle 55 mm below table level 93 - 180 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for powerlock 55 mm<br/>axial and radial cnc controlled<br/><br/>4. tool holder powerlock / hsk<br/>------------------------------<br/>first upper tool holder<br/>engine 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 180 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>split pressure shoe in front of upper spindle, adjustable on tool circle and<br/>swinging away from the tool, pneumatic<br/>pressure shoe in front, and exhaust to, the upper spindle with electronic<br/>digital displays, integrated in the memory function or the powercom<br/>axial and radial cnc controlled<br/><br/>5. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 180 mm<br/>saw diameter in connection with planing head diameter: 192 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>split pressure shoe in front of upper spindle, adjustable on tool circle and<br/>swinging away from the tool, suspended.<br/><br/>pressure shoe in front, and exhaust to, the upper spindle with electronic<br/>digital displays, integrated in the memory function or the powercom<br/><br/>pressure shoe in front of upper spindle with flat inlet slope, laterally <br/>displaceable.<br/><br/>glass strip removal to upper spindle, pneumatically controlled back / forth<br/>including stops to right spindle on 35 mm recessed for square<br/>afford separation<br/><br/>motorized axial (40 mm) controlled, max. saw blade diameter 180 mm<br/>radial cnc controlled<br/><br/>6. tool holder powerlock / hsk<br/>------------------------------<br/>second lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 15 mm<br/>adjustment axial 35 mm<br/>axial and radial cnc controlled<br/><br/>all tool holders with high concentricity.<br/><br/>feed system<br/>------------------------------<br/>electronic feed incl. brake, continuously variable 5 - 30 m / min.<br/>motor 4 kw<br/>feed roller before 1. lower tool<br/>pneumatically controlled high-low<br/>durofer pointed toothed rollers<br/>with depth limiter and self-cleaning<br/>adjustment of the feed rollers opposite<br/>left tool holder, axial 35 mm<br/>shortened roller distance compared to right spindle<br/><br/>electrical machinery<br/>------------------------------<br/>operating voltage 400 volts<br/>(voltage range 380 x 420 volts), 50 hz<br/>all spindle motors in ie 2 version<br/><br/>machine stand, table and stops<br/>------------------------------<br/>dressing table 2.5 m long (including joint rule)<br/>manual waxilitpumpe for tischentarzung.<br/>a powered rubber roller in the exit table,<br/>50 mm wide.<br/><br/><br/>pressure rollers and guides<br/>------------------------------<br/>two lateral pinch rollers in front of the left spindle, revolving and sprung<br/>lateral pressure roller on infeed table, sprung<br/>the pressure rollers can be swiveled away from above, opposite the right <br/>spindles<br/>sprung for easy tool change<br/><br/>machine operation: powercom plus control:<br/>------------------------------<br/>profile and tool data management software<br/>setting values ??can be calculated or saved.<br/>these are displayed on the digital double displays.<br/>touchscreen - function for graphically supported operation<br/>per 10,000 profile and tool storage locations<br/>profile pictures can be deposited on the profile data<br/>software servicecontrol for maintenance support<br/>integrated network card for connection to opticontrol or other pcs<br/>usb stick for manual data backup<br/>operating and machine data acquisition, incl. length counter<br/>user management with password function<br/>logging production interruptions<br/><br/>cnc-controlled adjustment and positionning of feed system up/down<br/><br/>lubrication points for the axial spindle adjustment<br/><br/>central position of lubrication points on the front of the machine<br/><br/><br/>safety and sound insulation<br/>------------------------------<br/>machine including spindle brakes<br/>safety - full fairing<br/>easily foldable safety hood with window covers<br/>the entire work area and protects against mechanical<br/>hazards.<br/>when lifting the safety hood tool holders<br/>and feed automatically switched off.<br/>for ce version, the safety cover is opened during<br/>of automatic mode not possible.<br/>electromagnetic locking of the safety hood<br/>(only after the tools have come to a standstill, approx. 15 seconds,<br/>can the hood be opened)<br/>interior lights in the safety hood<br/><br/>without heads.<br/><br/>option: longitudinal and cross conveyor with recirculation<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 6 ST.
WORKING WIDTH: 20-260 MM
WORKING HEIGHT: 10-160 MM
LENGTH OF THE PLANING TABLE: 2500 MM
FEED MOTOR: 4 KW
FEED SPEED: 5-30 M/MIN.
CONTROL: CNC
TURNING SPEEDS: 8000 U/MIN
WEINIG POWERMAT 600 FOR WINDOW PRODUCTION AS NEW, YEAR 2014
----------------------------------------------------------------

EXECUTIVE SUMMARY:
----------------------------------------------------------------
WORKING WIDTH: 20-260 MM
WORKING HEIGHT: 10 - 160 MM
6 SPINDLES (BOTTOM, RIGHT, LEFT, TOP, TOP, BOTTOM)
8,000 RPM
5 X HSK / POWERLOCK
WINDOW PACKAGE WITH GLAZING BEAD REMOVAL
SPINDLES AXIAL AND RADIAL CNC CONTROLLED
LARGE CONTROL POWERCOM PLUS WITH TOUCHSCREEN

DETAILED DESCRIPTION:
----------------------------------------------------------------

TECHNICAL SPECIFICATIONS:
-------------------------
WORKING WIDTH 20 - 260 MM (WITH TOOL CIRCLE 93 - 125 MM)
WORKING HEIGHT 10 - 160 MM (WITH TOOL CIRCLE 93 - 125 MM)

1ST SPINDLE
------------------------------
FIRST LOWER HORIZONTAL SPINDLE
ENGINE 7.5 KW
DIAMETER 40 MM
SPEED 6,000 RPM
TOOL FLIGHT CIRCLE 125 - 145 MM
IN CONJUNCTION WITH POWERLOCK 93 - 180 MM
TOOL CIRCLE FOLD CUTTERS 130-160 MM
ADJUSTMENT AXIAL 5 MM
FOLDING DEVICE, INCLUDING REBATE CUTTER
MARATHONCOATING IN FRONT OF 1ST LOWER SPINDLE

2. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST RIGHT TOOL HOLDER
MOTOR, TOGETHER WITH LEFT VERTICAL SPINDLE 15 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 40 MM BELOW TABLE LEVEL 93 - 200 MM
TOOL CIRCLE 55 MM BELOW TABLE LEVEL 93 - 180 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 180 MM
RIGHT SPINDLE MOTORIZED AXIAL (55MM),
MAX. SAW BLADE DIAMETER 180 MM
RADIAL CNC CONTROLLED

3. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LEFT TOOL HOLDER
SINGLE MOTOR WITH 1ST RIGHT VERTICAL SPINDLE
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 40 MM BELOW TABLE LEVEL 93 - 200 MM
TOOL CIRCLE 55 MM BELOW TABLE LEVEL 93 - 180 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
AXIAL AND RADIAL CNC CONTROLLED

4. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST UPPER TOOL HOLDER
ENGINE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 180 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
SPLIT PRESSURE SHOE IN FRONT OF UPPER SPINDLE, ADJUSTABLE ON TOOL CIRCLE AND
SWINGING AWAY FROM THE TOOL, PNEUMATIC
PRESSURE SHOE IN FRONT, AND EXHAUST TO, THE UPPER SPINDLE WITH ELECTRONIC
DIGITAL DISPLAYS, INTEGRATED IN THE MEMORY FUNCTION OR THE POWERCOM
AXIAL AND RADIAL CNC CONTROLLED

5. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 180 MM
SAW DIAMETER IN CONNECTION WITH PLANING HEAD DIAMETER: 192 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
SPLIT PRESSURE SHOE IN FRONT OF UPPER SPINDLE, ADJUSTABLE ON TOOL CIRCLE AND
SWINGING AWAY FROM THE TOOL, SUSPENDED.

PRESSURE SHOE IN FRONT, AND EXHAUST TO, THE UPPER SPINDLE WITH ELECTRONIC
DIGITAL DISPLAYS, INTEGRATED IN THE MEMORY FUNCTION OR THE POWERCOM

PRESSURE SHOE IN FRONT OF UPPER SPINDLE WITH FLAT INLET SLOPE, LATERALLY
DISPLACEABLE.

GLASS STRIP REMOVAL TO UPPER SPINDLE, PNEUMATICALLY CONTROLLED BACK / FORTH
INCLUDING STOPS TO RIGHT SPINDLE ON 35 MM RECESSED FOR SQUARE
AFFORD SEPARATION

MOTORIZED AXIAL (40 MM) CONTROLLED, MAX. SAW BLADE DIAMETER 180 MM
RADIAL CNC CONTROLLED

6. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 15 MM
ADJUSTMENT AXIAL 35 MM
AXIAL AND RADIAL CNC CONTROLLED

ALL TOOL HOLDERS WITH HIGH CONCENTRICITY.

FEED SYSTEM
------------------------------
ELECTRONIC FEED INCL. BRAKE, CONTINUOUSLY VARIABLE 5 - 30 M / MIN.
MOTOR 4 KW
FEED ROLLER BEFORE 1. LOWER TOOL
PNEUMATICALLY CONTROLLED HIGH-LOW
DUROFER POINTED TOOTHED ROLLERS
WITH DEPTH LIMITER AND SELF-CLEANING
ADJUSTMENT OF THE FEED ROLLERS OPPOSITE
LEFT TOOL HOLDER, AXIAL 35 MM
SHORTENED ROLLER DISTANCE COMPARED TO RIGHT SPINDLE

ELECTRICAL MACHINERY
------------------------------
OPERATING VOLTAGE 400 VOLTS
(VOLTAGE RANGE 380 X 420 VOLTS), 50 HZ
ALL SPINDLE MOTORS IN IE 2 VERSION

MACHINE STAND, TABLE AND STOPS
------------------------------
DRESSING TABLE 2.5 M LONG (INCLUDING JOINT RULE)
MANUAL WAXILITPUMPE FOR TISCHENTARZUNG.
A POWERED RUBBER ROLLER IN THE EXIT TABLE,
50 MM WIDE.


PRESSURE ROLLERS AND GUIDES
------------------------------
TWO LATERAL PINCH ROLLERS IN FRONT OF THE LEFT SPINDLE, REVOLVING AND SPRUNG
LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG
THE PRESSURE ROLLERS CAN BE SWIVELED AWAY FROM ABOVE, OPPOSITE THE RIGHT
SPINDLES
SPRUNG FOR EASY TOOL CHANGE

MACHINE OPERATION: POWERCOM PLUS CONTROL:
------------------------------
PROFILE AND TOOL DATA MANAGEMENT SOFTWARE
SETTING VALUES ??CAN BE CALCULATED OR SAVED.
THESE ARE DISPLAYED ON THE DIGITAL DOUBLE DISPLAYS.
TOUCHSCREEN - FUNCTION FOR GRAPHICALLY SUPPORTED OPERATION
PER 10,000 PROFILE AND TOOL STORAGE LOCATIONS
PROFILE PICTURES CAN BE DEPOSITED ON THE PROFILE DATA
SOFTWARE SERVICECONTROL FOR MAINTENANCE SUPPORT
INTEGRATED NETWORK CARD FOR CONNECTION TO OPTICONTROL OR OTHER PCS
USB STICK FOR MANUAL DATA BACKUP
OPERATING AND MACHINE DATA ACQUISITION, INCL. LENGTH COUNTER
USER MANAGEMENT WITH PASSWORD FUNCTION
LOGGING PRODUCTION INTERRUPTIONS

CNC-CONTROLLED ADJUSTMENT AND POSITIONNING OF FEED SYSTEM UP/DOWN

LUBRICATION POINTS FOR THE AXIAL SPINDLE ADJUSTMENT

CENTRAL POSITION OF LUBRICATION POINTS ON THE FRONT OF THE MACHINE


SAFETY AND SOUND INSULATION
------------------------------
MACHINE INCLUDING SPINDLE BRAKES
SAFETY - FULL FAIRING
EASILY FOLDABLE SAFETY HOOD WITH WINDOW COVERS
THE ENTIRE WORK AREA AND PROTECTS AGAINST MECHANICAL
HAZARDS.
WHEN LIFTING THE SAFETY HOOD TOOL HOLDERS
AND FEED AUTOMATICALLY SWITCHED OFF.
FOR CE VERSION, THE SAFETY COVER IS OPENED DURING
OF AUTOMATIC MODE NOT POSSIBLE.
ELECTROMAGNETIC LOCKING OF THE SAFETY HOOD
(ONLY AFTER THE TOOLS HAVE COME TO A STANDSTILL, APPROX. 15 SECONDS,
CAN THE HOOD BE OPENED)
INTERIOR LIGHTS IN THE SAFETY HOOD

WITHOUT HEADS.

OPTION: LONGITUDINAL AND CROSS CONVEYOR WITH RECIRCULATION

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)






Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 1.610.000 €
Ubicación: Land-a complete set of machines for the production of leaky feeder cables

    it consists of four separate lines for subsequent stages of production rk-c (internal insulation), rk-w (screen application), rk-m (external insulation) rl-j (screen cutting). not used, installed by the factory service.

    specification and technical conditions

    specification:

    1. production line for applying internal insulation r k-c

    product data:
    material of inner conductor
    - copper (solid),
    - aluminum (solid),
    - copper cladded aluminum
    required tensile strength for copper conductor: 210 n/mm2
    product range: rg59 - 1/2 A COMPLETE SET OF MACHINES FOR THE PRODUCTION OF LEAKY FEEDER CABLES IT CONSISTS OF FOUR SEPARATE LINES FOR SUBSEQUENT STAGES OF PRODUCTION RK-C (INTERNAL INSULATION), RK-W (SCREEN APPLICATION), RK-M (EXTERNAL INSULATION) RL-J (SCREEN CUTTING). NOT USED, INSTALLED BY THE FACTORY SERVICE. SPECIFICATION AND TECHNICAL CONDITIONS SPECIFICATION: 1. PRODUCTION LINE FOR APPLYING INTERNAL INSULATION R K-C PRODUCT DATA: MATERIAL OF INNER CONDUCTOR - COPPER (SOLID), - ALUMINUM (SOLID), - COPPER CLADDED ALUMINUM REQUIRED TENSILE STRENGTH FOR COPPER CONDUCTOR: 210 N/MM2 PRODUCT RANGE: RG59 - 1/2" RF DIAMETER OF INNER CONDUCTOR: 0,81 - 5 MM DIAMETER OVER INSULATION: 3 - 12,5 MM WALL THICKNESS OF INSULATION: 1,0- 4,5 MM MATERIAL FOR INSULATION PE (PHYS. FOAMING DEGREE UP TO 84 %) FOAMING DEGREE DEPENDING ON PRODUCT DIMENSION. MATERIAL FOR ADHESIVE LAYER: LD-PE LINE DATA LINE GEARED FOR: MAX. 200 M/MIN. AT BARREL DIAMETER: 400 MM CABLE PASSAGE OVER FLOOR: 1000 MM REEL DATA PAY-OFF STAND AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG TAKE-UP STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG 2. PRODUCTION LINE FOR APPLYING SHIELDING (WELDING, CORRUGATING) R K-W PRODUCT DATA: CABLE TYPE: RADIO FREQUENCY COAXIAL CABLE CABLE CORE DIAMETER (MM): 4,6 - 42,9 MM (INCH): 1/4" - 1 5/8" METAL TYPE: COPPER STOCK TAPE WIDTH: 22 -150 MM METAL TAPE THICKNESS: 0,2 - 0,5 MM WELDING METHOD: TIG LINE DATA LINE GEARED FOR: MAX. 45 M/MIN. AT BARREL DIAMETER: 400 MM CABLE PASSAGE OVER FLOOR: 1000 MM REEL DATA PAY-OFF STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG LONGITUDINAL TAPE PAY-OFF: MHR 300 OUTER DIAMETER: MAX. 1.200 MM TAPE WIDTH: 21 - 320 MM INNER DIAMETER: 380 - 430 MM WEIGHT: MAX. 3.000 KG TAKE-UP STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG 3. PRODUCTION LINE FOR APPLYING EXTERNAL INSULATION RK-M PRODUCT DATA: CABLE TYPE: COAX CORES DIAMETER OVER INSULATION: 3 - 20 MM INSULATION MATERIAL: LSOH, PVC ,PE LINE DATA LINE GEARED FOR: MAX. 300 M/MIN. AT BARREL DIAMETER: 400 MM CABLE PASSAGE OVER FLOOR: 1000 MM REEL DATA PAY-OFF STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG LONGITUDINAL TAPE PAY-OFF: RBA 1041 OUTER DIAMETER: MAX. 800 MM TAPE WIDTH: MAX. 152 MM (6”) INNER DIAMETER: 380 - 430 MM WEIGHT: MAX. 200 KG TAKE-UP STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG 4. PRODUCTION LINE FOR CUTTING THE SHIELDING (SLOTTING) RL-J PRODUCT DATA: PRODUCT DIAMETER: 4 - 20 MM REWINDING OPERATION: REWINDING SPEED: MAX. 250 M/MIN AT BARREL DIAMETER: 400 MM SLOTTING OPERATION: SLOTTING SPEED: MAX. 5 M/MIN HEIGHT OF CABLE PASSAGE OVER FLOOR: 1000 MM REEL DATA PAY-OFF STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG TAKE-UP STAND: AUF 5.16 FLANGE DIAMETER: 800 1600 MM WIDTH OVER HUBS: 500 - 1500 MM MAX. REEL WEIGHT: 5.000 KG
Vendedor: NETBID Polska Sp. z o.o.
Año de construcción: usado
Ubicación: Land-pressure:500 t<br/>passage width:2100 x 1500 mm<br/>stroke:1000 mm<br/>total power requirement:62 kw<br/>weight of the machine ca.:39 t<br/>dimensions:5100 x 2800 x 4040 mm<br/>return capacity:40 t<br/>:2 stück<br/>column diameter:hauptzylinder 360 mm<br/>table dimensions:2100 x 1500 mit t-nuten mm<br/>:2100 x 1500 mm<br/>table height over floor:850 mm<br/>pre-running speed:300 mm/sec<br/>return speed:300 (bei 20t stößelgewicht) mm/sec<br/>pressure speed:200t = 28 mm/sec<br/>:ca. 1000 l<br/>:2 stück<br/>column diameter:hilfszylinder 120 mm<br/>total size table tops:ca. 2750 x 1600 mm<br/>total size of plunger plates:ca. 2750 x 1600 mm<br/>pressure speed:300t = 20 mm/sec<br/>pressure speed:500t = 6 mm/sec<br/>retract force of the plunger:40 t<br/>voltage:400 v<br/>frequency:50 hz<br/>:24 v<br/>axial piston pump (rexroth/bosch a4vso125):290 lt/min<br/>daylight opening:1500 mm<br/>hydraulic block:rexroth <br/>pressure control:über plc (mindestdruck 50t) <br/>cylinder:4 x ?90 x 70 mm<br/>stroke length max.:300 über plc einstellbar mm<br/>:95 mm/sec<br/>:240 mm/sec<br/>capacity:4 x 15t bei 250 bar t<br/>:über monitor von 50-500t t<br/>:0-900 sec<br/>: <br/>: <br/>: <br/>: <br/>uyhdraulic tank:2000 l<br/>ram secured mechanically and hydraulicly: <br/>: <br/>tough machine frame with solid welded design: <br/>reliable low-maintenance construction: <br/>manufactured by certified specialists: <br/>: <br/>t-grooves as per din 650-22: <br/>ce-certificate: <br/>construction in accordance with eu standards: <br/>: <br/>induction-hardened and chrome plated cylinder: <br/>: <br/>: <br/>hydraulic components bosch rexroth: <br/>lightcurtains by schmersal: <br/>: <br/>: <br/>: <br/>: <br/>siemens control system:s7 300 <br/>:200 programme <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>usb interface for data transfer: <br/>: <br/>:1500 auf der vorderseite mm<br/>: <br/>interior lighting via leds: <br/><br/> PRESSURE:500 T
PASSAGE WIDTH:2100 X 1500 MM
STROKE:1000 MM
TOTAL POWER REQUIREMENT:62 KW
WEIGHT OF THE MACHINE CA.:39 T
DIMENSIONS:5100 X 2800 X 4040 MM
RETURN CAPACITY:40 T
:2 STüCK
COLUMN DIAMETER:HAUPTZYLINDER 360 MM
TABLE DIMENSIONS:2100 X 1500 MIT T-NUTEN MM
:2100 X 1500 MM
TABLE HEIGHT OVER FLOOR:850 MM
PRE-RUNNING SPEED:300 MM/SEC
RETURN SPEED:300 (BEI 20T STößELGEWICHT) MM/SEC
PRESSURE SPEED:200T = 28 MM/SEC
:CA. 1000 L
:2 STüCK
COLUMN DIAMETER:HILFSZYLINDER 120 MM
TOTAL SIZE TABLE TOPS:CA. 2750 X 1600 MM
TOTAL SIZE OF PLUNGER PLATES:CA. 2750 X 1600 MM
PRESSURE SPEED:300T = 20 MM/SEC
PRESSURE SPEED:500T = 6 MM/SEC
RETRACT FORCE OF THE PLUNGER:40 T
VOLTAGE:400 V
FREQUENCY:50 HZ
:24 V
AXIAL PISTON PUMP (REXROTH/BOSCH A4VSO125):290 LT/MIN
DAYLIGHT OPENING:1500 MM
HYDRAULIC BLOCK:REXROTH
PRESSURE CONTROL:üBER PLC (MINDESTDRUCK 50T)
CYLINDER:4 X ?90 X 70 MM
STROKE LENGTH MAX.:300 üBER PLC EINSTELLBAR MM
:95 MM/SEC
:240 MM/SEC
CAPACITY:4 X 15T BEI 250 BAR T
:üBER MONITOR VON 50-500T T
:0-900 SEC
:
:
:
:
UYHDRAULIC TANK:2000 L
RAM SECURED MECHANICALLY AND HYDRAULICLY:
:
TOUGH MACHINE FRAME WITH SOLID WELDED DESIGN:
RELIABLE LOW-MAINTENANCE CONSTRUCTION:
MANUFACTURED BY CERTIFIED SPECIALISTS:
:
T-GROOVES AS PER DIN 650-22:
CE-CERTIFICATE:
CONSTRUCTION IN ACCORDANCE WITH EU STANDARDS:
:
INDUCTION-HARDENED AND CHROME PLATED CYLINDER:
:
:
HYDRAULIC COMPONENTS BOSCH REXROTH:
LIGHTCURTAINS BY SCHMERSAL:
:
:
:
:
SIEMENS CONTROL SYSTEM:S7 300
:200 PROGRAMME
:
:
:
:
:
:
USB INTERFACE FOR DATA TRANSFER:
:
:1500 AUF DER VORDERSEITE MM
:
INTERIOR LIGHTING VIA LEDS:

Vendedor: Hidrobrasil
Año de construcción: usado
Ubicación: Land-maximum turning from bar diameter 32 mm
maximum length headstock z1-z2 machinable 320 mm
z3 stroke 320 mm
revolutions of the main spindle 8.000
spindle power kw 8/11
rpm spindle against 8,000
spindle power kw 8/11
resolver axes x2-y2-z2
rpm driven tools 6000 rev / min 
power kw 6
stroke x2 115/140
y2 race 100 (50 + 50)
number of stations for motor 10 
no stations vdi 30 n 10
portensili on turret: n. 1 toolholder double backlog sx
n. 2 port triple dx / sx tips
n. 1 toolholder double dx
n. 1 single tool holder dx
n. 2 motorized door transverse tip
no. 2 leads to cup cutters (for cutters d. 50)
n. 2 motorized door axial tip (90 °) sx
n. 1 axial tip motorized door (90 °)
plate tool vertical axis x1-y1 
number of turning tools 5 (16x16)
num rotary 4 (er 16/20)
mot power 1.6 kw 
motor rpm 8000
axes number 16 (10 lieari +6 rotating)
total number of tools 45 
with 30 driven tools 3 y axes (3 y-axis optional)
c-axis of the mandrel and against the mandrel
charging bars iemca boss 322 e
machine is very equipped: it has two rotating guide bushing, the pneumatic valve and the normal
high-pressure pump 50 frascara bar with entrance on the turret and machining operations to be counterspindle 
door series utensils on castle
these mobile headstock 10 axes (8 + 2 linear axes c) very nice always worked absolutely spot oil currently in production
machine weight 4600 kg MAXIMUM TURNING FROM BAR DIAMETER 32 MM MAXIMUM LENGTH HEADSTOCK Z1-Z2 MACHINABLE 320 MM Z3 STROKE 320 MM REVOLUTIONS OF THE MAIN SPINDLE 8.000 SPINDLE POWER KW 8/11 RPM SPINDLE AGAINST 8,000 SPINDLE POWER KW 8/11 RESOLVER AXES X2-Y2-Z2 RPM DRIVEN TOOLS 6000 REV / MIN POWER KW 6 STROKE X2 115/140 Y2 RACE 100 (50 + 50) NUMBER OF STATIONS FOR MOTOR 10 NO STATIONS VDI 30 N 10 PORTENSILI ON TURRET: N. 1 TOOLHOLDER DOUBLE BACKLOG SX N. 2 PORT TRIPLE DX / SX TIPS N. 1 TOOLHOLDER DOUBLE DX N. 1 SINGLE TOOL HOLDER DX N. 2 MOTORIZED DOOR TRANSVERSE TIP NO. 2 LEADS TO CUP CUTTERS (FOR CUTTERS D. 50) N. 2 MOTORIZED DOOR AXIAL TIP (90 °) SX N. 1 AXIAL TIP MOTORIZED DOOR (90 °) PLATE TOOL VERTICAL AXIS X1-Y1 NUMBER OF TURNING TOOLS 5 (16X16) NUM ROTARY 4 (ER 16/20) MOT POWER 1.6 KW MOTOR RPM 8000 AXES NUMBER 16 (10 LIEARI +6 ROTATING) TOTAL NUMBER OF TOOLS 45 WITH 30 DRIVEN TOOLS 3 Y AXES (3 Y-AXIS OPTIONAL) C-AXIS OF THE MANDREL AND AGAINST THE MANDREL CHARGING BARS IEMCA BOSS 322 E MACHINE IS VERY EQUIPPED: IT HAS TWO ROTATING GUIDE BUSHING, THE PNEUMATIC VALVE AND THE NORMAL HIGH-PRESSURE PUMP 50 FRASCARA BAR WITH ENTRANCE ON THE TURRET AND MACHINING OPERATIONS TO BE COUNTERSPINDLE DOOR SERIES UTENSILS ON CASTLE THESE MOBILE HEADSTOCK 10 AXES (8 + 2 LINEAR AXES C) VERY NICE ALWAYS WORKED ABSOLUTELY SPOT OIL CURRENTLY IN PRODUCTION MACHINE WEIGHT 4600 KG
Vendedor: Industrialbay
Año de construcción: usado
Precio: 90.000 €
Ubicación: Land-tenoning spindle: 2 st.<br/>number of milling agregates: 6 st.<br/>spindle diameter: 50 mm<br/>! machine can be inspected during production !<br/><br/>! machine for sale in customer orders !<br/><br/># 6192 weinig unicontrol 12 cnc, with 2 tenoning spindles and vario table<br/>.................................................. ....<br/><br/>specifications summary<br/>(possibly more included equpment please inquire)<br/>.................................................. ....<br/><br/><br/>cut-off saw<br/>.................................................. ....<br/>cut-off saw electronically, horizontally adjustable: nc axis<br/>number of tools: 1 pcs.<br/>spindle speed: 3000-6000 r / min<br/>spindle diameter: 40 mm<br/>tool clamping length: 13 mm<br/>tool diameter max .: 400 mm<br/>motor power: 3 kw<br/>alignment laser for detecting the cut<br/>displacement axial: nc-axis integrated into control<br/>displacement axial: 150 mm<br/><br/>aggregate for edge rounding of the bottom<br/>.................................................. ....<br/>axial adjustment along with ablängsäge<br/>spindle speed: 9000 u / min<br/>spindle diameter: 20 mm<br/>tool clamping length: 25 mm<br/>tool diameter max .: 130 mm<br/>motor power: 3 kw<br/><br/>length stop cnc controlled<br/>.................................................. ....<br/>length 3500 mm<br/>incl. positioned cut-off saw integrated into control<br/><br/>1st tenoning spindle<br/>.................................................. ....<br/>number of tools: variable, cnc-axis<br/>spindle length: 640 mm<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle speed: 2800 u / min<br/>spindle diameter: 50 mm<br/>tool diameter max .: 380 mm<br/>engine power: 15 kw<br/>with hydraulic tensioned outboard bearing<br/>complete counterprofile: complete spindle length is countered<br/><br/><br/>2. tenoning spindle<br/>.................................................. ....<br/>number of tools: variable, cnc-axis<br/>spindle length: 640 mm<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle speed: 2800 u / min<br/>spindle diameter: 50 mm<br/>tool diameter max .: 380 mm<br/>engine power: 15 kw<br/>with hydraulic tensioned outboard bearing<br/>complete counterprofile: complete spindle length is countered<br/><br/><br/>vario table with horizontal nc-axis<br/><br/><br/>1. profiling spindle<br/>.................................................. ....<br/>position: right<br/>number of tools: variable, cnc-axis<br/>spindle length: 400 mm with counter bearing<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle horizontal: variable, cnc-axis<br/>spindle speed: 7000 u / min<br/>spindle diameter: 50 mm<br/>tooling circle max .: 232 mm<br/>engine power: 11 kw<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/>2. profiling spindle<br/>.................................................. ....<br/>position: right<br/>number of tools: variable, cnc-axis<br/>spindle length: 400 mm with counter bearing<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle horizontal: variable, cnc-axis<br/>spindle speed: 7000 u / min<br/>spindle diameter: 50 mm<br/>tooling circle max .: 232 mm<br/>engine power: 11 kw<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/>grooving aggregate from above - before the final profile spindle<br/>.................................................. ....<br/>position: horizontal top<br/>spindle speed: 9000 u / min<br/>spindle diameter: 40 mm<br/>spindle length: 40 mm<br/>engine power: 3.7 kw<br/>displacement axial: 30mm<br/>displacement radial: 125 mm<br/>radial clock to 8 positions by pneumatic gun<br/>axial adjustment with nc-axis<br/><br/><br/>3. profiling spindle  <br/>.................................................. ....<br/>position: right<br/>number of tools: variable, cnc-axis<br/>spindle length: 400 mm with counter bearing<br/>spindle stroke vertical: variable, cnc-axis<br/>spindle horizontal: variable, cnc-axis<br/>spindle speed: 6000 u / min<br/>spindle diameter: 50 mm<br/>tooling circle max .: 232 mm<br/>engine power: 11 kw<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/><br/>profiling spindle - fitting spindle - at the machine end<br/>.................................................. ....<br/>position: vertical right up<br/>spindle length: 160 mm<br/>spindle speed: 5850 u / min<br/>spindle diameter: 40 mm<br/>tooling circle max .: 210 mm<br/>engine power: 3.7 kw<br/>displacement axial: 115 mm<br/>displacement radial: 100 mm<br/>radial adjustment: cnc axis<br/>axial adjustment: cnc axis<br/><br/>grooving aggregate from top - in addition stand<br/>.................................................. <br/>position: vertical right<br/>spindle length: 40 mm<br/>spindle speed: 5850 u / min<br/>spindle diameter: 40 mm<br/>tooling circle max .: 180 mm<br/>motor power: 3 kw<br/>displacement axial: 100 mm<br/>displacement radial: 80 mm<br/>radial clocked to 8 positions by pneumatic gun<br/>axial clocked to 8 positions by pneumatic gun<br/><br/>grooving aggregate from bottom side - in addition stand<br/>.................................................. ....<br/>position: horizontal bottom<br/>spindle length: 125 mm                  <br/>spindle speed: 5850 u / min<br/>spindle diameter: 40 mm<br/>tooling circle max .: 200 mm<br/>motor power: 3 kw<br/>displacement axial: 100 mm<br/>displacement radial: 100 mm<br/>radial adjustment infinitely variable nc axis<br/>axial clocked to 8 positions by pneumatic gun<br/><br/>         <br/>other features<br/>.................................................. ....<br/><br/>online-capable<br/>equipment for stormproofing of already pressed sashes.<br/>that means on the machine you can do the outside profiles on single pieces or<br/>in pressed condition<br/>double piece package<br/>return conveyor for 1-man operation: turning system with collet<br/>studio window equipment<br/>electronic angle display for angular windows<br/>control: pc-nexus<br/>nc-axis for feed height adjustment<br/>2 axially clocked feed rollers opposite profile spindle for manufacturing<br/>narrow and short parts<br/>rung leadership and shoot supports bar<br/>pressure lineal from side is divided in sections<br/>automatic central lubrication<br/>vario table with horizontal nc-axis<br/><br/><br/>option:<br/>used oertli tools in different systems for single part production (that means <br/>customer did the outide profile of the sahes on the single piece)<br/><br/><br/>techn. details according to manufacturer - without guarantee!<br/><br/><br/><br/><br/> TENONING SPINDLE: 2 ST.
NUMBER OF MILLING AGREGATES: 6 ST.
SPINDLE DIAMETER: 50 MM
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! MACHINE FOR SALE IN CUSTOMER ORDERS !

# 6192 WEINIG UNICONTROL 12 CNC, WITH 2 TENONING SPINDLES AND VARIO TABLE
.................................................. ....

SPECIFICATIONS SUMMARY
(POSSIBLY MORE INCLUDED EQUPMENT PLEASE INQUIRE)
.................................................. ....


CUT-OFF SAW
.................................................. ....
CUT-OFF SAW ELECTRONICALLY, HORIZONTALLY ADJUSTABLE: NC AXIS
NUMBER OF TOOLS: 1 PCS.
SPINDLE SPEED: 3000-6000 R / MIN
SPINDLE DIAMETER: 40 MM
TOOL CLAMPING LENGTH: 13 MM
TOOL DIAMETER MAX .: 400 MM
MOTOR POWER: 3 KW
ALIGNMENT LASER FOR DETECTING THE CUT
DISPLACEMENT AXIAL: NC-AXIS INTEGRATED INTO CONTROL
DISPLACEMENT AXIAL: 150 MM

AGGREGATE FOR EDGE ROUNDING OF THE BOTTOM
.................................................. ....
AXIAL ADJUSTMENT ALONG WITH ABLäNGSäGE
SPINDLE SPEED: 9000 U / MIN
SPINDLE DIAMETER: 20 MM
TOOL CLAMPING LENGTH: 25 MM
TOOL DIAMETER MAX .: 130 MM
MOTOR POWER: 3 KW

LENGTH STOP CNC CONTROLLED
.................................................. ....
LENGTH 3500 MM
INCL. POSITIONED CUT-OFF SAW INTEGRATED INTO CONTROL

1ST TENONING SPINDLE
.................................................. ....
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 640 MM
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 2800 U / MIN
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 380 MM
ENGINE POWER: 15 KW
WITH HYDRAULIC TENSIONED OUTBOARD BEARING
COMPLETE COUNTERPROFILE: COMPLETE SPINDLE LENGTH IS COUNTERED


2. TENONING SPINDLE
.................................................. ....
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 640 MM
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 2800 U / MIN
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 380 MM
ENGINE POWER: 15 KW
WITH HYDRAULIC TENSIONED OUTBOARD BEARING
COMPLETE COUNTERPROFILE: COMPLETE SPINDLE LENGTH IS COUNTERED


VARIO TABLE WITH HORIZONTAL NC-AXIS


1. PROFILING SPINDLE
.................................................. ....
POSITION: RIGHT
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 400 MM WITH COUNTER BEARING
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE HORIZONTAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 7000 U / MIN
SPINDLE DIAMETER: 50 MM
TOOLING CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS

2. PROFILING SPINDLE
.................................................. ....
POSITION: RIGHT
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 400 MM WITH COUNTER BEARING
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE HORIZONTAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 7000 U / MIN
SPINDLE DIAMETER: 50 MM
TOOLING CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS

GROOVING AGGREGATE FROM ABOVE - BEFORE THE FINAL PROFILE SPINDLE
.................................................. ....
POSITION: HORIZONTAL TOP
SPINDLE SPEED: 9000 U / MIN
SPINDLE DIAMETER: 40 MM
SPINDLE LENGTH: 40 MM
ENGINE POWER: 3.7 KW
DISPLACEMENT AXIAL: 30MM
DISPLACEMENT RADIAL: 125 MM
RADIAL CLOCK TO 8 POSITIONS BY PNEUMATIC GUN
AXIAL ADJUSTMENT WITH NC-AXIS


3. PROFILING SPINDLE
.................................................. ....
POSITION: RIGHT
NUMBER OF TOOLS: VARIABLE, CNC-AXIS
SPINDLE LENGTH: 400 MM WITH COUNTER BEARING
SPINDLE STROKE VERTICAL: VARIABLE, CNC-AXIS
SPINDLE HORIZONTAL: VARIABLE, CNC-AXIS
SPINDLE SPEED: 6000 U / MIN
SPINDLE DIAMETER: 50 MM
TOOLING CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS


PROFILING SPINDLE - FITTING SPINDLE - AT THE MACHINE END
.................................................. ....
POSITION: VERTICAL RIGHT UP
SPINDLE LENGTH: 160 MM
SPINDLE SPEED: 5850 U / MIN
SPINDLE DIAMETER: 40 MM
TOOLING CIRCLE MAX .: 210 MM
ENGINE POWER: 3.7 KW
DISPLACEMENT AXIAL: 115 MM
DISPLACEMENT RADIAL: 100 MM
RADIAL ADJUSTMENT: CNC AXIS
AXIAL ADJUSTMENT: CNC AXIS

GROOVING AGGREGATE FROM TOP - IN ADDITION STAND
..................................................
POSITION: VERTICAL RIGHT
SPINDLE LENGTH: 40 MM
SPINDLE SPEED: 5850 U / MIN
SPINDLE DIAMETER: 40 MM
TOOLING CIRCLE MAX .: 180 MM
MOTOR POWER: 3 KW
DISPLACEMENT AXIAL: 100 MM
DISPLACEMENT RADIAL: 80 MM
RADIAL CLOCKED TO 8 POSITIONS BY PNEUMATIC GUN
AXIAL CLOCKED TO 8 POSITIONS BY PNEUMATIC GUN

GROOVING AGGREGATE FROM BOTTOM SIDE - IN ADDITION STAND
.................................................. ....
POSITION: HORIZONTAL BOTTOM
SPINDLE LENGTH: 125 MM
SPINDLE SPEED: 5850 U / MIN
SPINDLE DIAMETER: 40 MM
TOOLING CIRCLE MAX .: 200 MM
MOTOR POWER: 3 KW
DISPLACEMENT AXIAL: 100 MM
DISPLACEMENT RADIAL: 100 MM
RADIAL ADJUSTMENT INFINITELY VARIABLE NC AXIS
AXIAL CLOCKED TO 8 POSITIONS BY PNEUMATIC GUN


OTHER FEATURES
.................................................. ....

ONLINE-CAPABLE
EQUIPMENT FOR STORMPROOFING OF ALREADY PRESSED SASHES.
THAT MEANS ON THE MACHINE YOU CAN DO THE OUTSIDE PROFILES ON SINGLE PIECES OR
IN PRESSED CONDITION
DOUBLE PIECE PACKAGE
RETURN CONVEYOR FOR 1-MAN OPERATION: TURNING SYSTEM WITH COLLET
STUDIO WINDOW EQUIPMENT
ELECTRONIC ANGLE DISPLAY FOR ANGULAR WINDOWS
CONTROL: PC-NEXUS
NC-AXIS FOR FEED HEIGHT ADJUSTMENT
2 AXIALLY CLOCKED FEED ROLLERS OPPOSITE PROFILE SPINDLE FOR MANUFACTURING
NARROW AND SHORT PARTS
RUNG LEADERSHIP AND SHOOT SUPPORTS BAR
PRESSURE LINEAL FROM SIDE IS DIVIDED IN SECTIONS
AUTOMATIC CENTRAL LUBRICATION
VARIO TABLE WITH HORIZONTAL NC-AXIS


OPTION:
USED OERTLI TOOLS IN DIFFERENT SYSTEMS FOR SINGLE PART PRODUCTION (THAT MEANS
CUSTOMER DID THE OUTIDE PROFILE OF THE SAHES ON THE SINGLE PIECE)


TECHN. DETAILS ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-volume flow: 90000m³/h, connected load: 45kw, cool water consumption: 0.8m³/h, heating output: 180kw, the plant was designed for 30-40 looms, including axial fans for supply and return air, air cleaner, regulating system, drive motors, control cabinet and additional accessories, the plant was in use for three and a half years.   VOLUME FLOW: 90000M³/H, CONNECTED LOAD: 45KW, COOL WATER CONSUMPTION: 0.8M³/H, HEATING OUTPUT: 180KW, THE PLANT WAS DESIGNED FOR 30-40 LOOMS, INCLUDING AXIAL FANS FOR SUPPLY AND RETURN AIR, AIR CLEANER, REGULATING SYSTEM, DRIVE MOTORS, CONTROL CABINET AND ADDITIONAL ACCESSORIES, THE PLANT WAS IN USE FOR THREE AND A HALF YEARS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2700 x 2600 mm<br/>description: serial nº 26549. module 6. workpiece diameter 220 mm. axial slide way 250 mm. number of teeth 4. diameter of hob 163 mm. cutter length 230 mm. internal reference 310.175 WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2700 X 2600 MM
DESCRIPTION: SERIAL Nº 26549. MODULE 6. WORKPIECE DIAMETER 220 MM. AXIAL SLIDE WAY 250 MM. NUMBER OF TEETH 4. DIAMETER OF HOB 163 MM. CUTTER LENGTH 230 MM. INTERNAL REFERENCE 310.175
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-there are three forming machines available, tube diameter: 6-32mm, compressing force: 98kn, forming length: 80mm, clamping length: 150mm, number of forming stations machine 1/ 2 and 3: 3/ 6, length: 2300mm, width: 2000mm, height: 1900mm, weight: 1.5t.  THERE ARE THREE FORMING MACHINES AVAILABLE, TUBE DIAMETER: 6-32MM, COMPRESSING FORCE: 98KN, FORMING LENGTH: 80MM, CLAMPING LENGTH: 150MM, NUMBER OF FORMING STATIONS MACHINE 1/ 2 AND 3: 3/ 6, LENGTH: 2300MM, WIDTH: 2000MM, HEIGHT: 1900MM, WEIGHT: 1.5T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2700 x 2600 mm<br/>description: serial nº 26532. module 6. workpiece diameter 220 mm. axial slide way 250 mm. number of teeth 4. diameter of hob 163 mm. cutter length 230 mm. internal reference 310.174 WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2700 X 2600 MM
DESCRIPTION: SERIAL Nº 26532. MODULE 6. WORKPIECE DIAMETER 220 MM. AXIAL SLIDE WAY 250 MM. NUMBER OF TEETH 4. DIAMETER OF HOB 163 MM. CUTTER LENGTH 230 MM. INTERNAL REFERENCE 310.174
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gleason pfauter pe 500 cnc hobbing machine
operation hours 29532 

cnc control

larger repairs:

in september 2015 there were problems with the a-axis. a-axis sporadically increased with standstill monitoring. then the drive module of the a-axis was replaced.
in 2013, the cooling unit was replaced.
in 2012, the pressure vessel was swapped according to betrsichv.
technical data:

max. wheel diameter 500mm
gear width 400mm
max. module 12.
diameter of hob 192mm.
max. cutter length 250mm
milling slide travel 200mm
shifting 200mm
milling spindle speed 40-450 rpm
axial feed 1-1500 mm/min
radial feed 1-1500 mm/min
table diameter 450mm
dimensions 5240 x 4350 x 3220mm. GLEASON PFAUTER PE 500 CNC HOBBING MACHINE OPERATION HOURS 29532 CNC CONTROL LARGER REPAIRS: IN SEPTEMBER 2015 THERE WERE PROBLEMS WITH THE A-AXIS. A-AXIS SPORADICALLY INCREASED WITH STANDSTILL MONITORING. THEN THE DRIVE MODULE OF THE A-AXIS WAS REPLACED. IN 2013, THE COOLING UNIT WAS REPLACED. IN 2012, THE PRESSURE VESSEL WAS SWAPPED ACCORDING TO BETRSICHV. TECHNICAL DATA: MAX. WHEEL DIAMETER 500MM GEAR WIDTH 400MM MAX. MODULE 12. DIAMETER OF HOB 192MM. MAX. CUTTER LENGTH 250MM MILLING SLIDE TRAVEL 200MM SHIFTING 200MM MILLING SPINDLE SPEED 40-450 RPM AXIAL FEED 1-1500 MM/MIN RADIAL FEED 1-1500 MM/MIN TABLE DIAMETER 450MM DIMENSIONS 5240 X 4350 X 3220MM.
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Ubicación: Land-number of spindles: 6 st.<br/>working width: 230 mm<br/>working height: 120 mm<br/>length of the planing table: 2000 mm<br/>feed motor: 3 kw<br/>feed speed: 5-30 m/min.<br/>control: cnc <br/>weinig powermat 500 for window production with strip separation<br/>-------------------------------------------------- ---------------------<br/><br/>executive summary:<br/>-------------------------------------------------- ---------------------<br/>6 spindles hsk / powerlock with 7.5 kw and 8000 u / min each<br/>window package with glazing bead removal<br/>width, height and feed controlled by memory function<br/><br/><br/>detailed description:<br/>-------------------------------------------------- ---------------------<br/><br/>technical specifications:<br/>-------------------------<br/>working width 20 - 230 mm (with tool circle 93 - 125 mm)<br/>working height 8 - 120 mm (with tool circle 93 - 125 mm)<br/><br/>1. tool holder powerlock / hsk<br/>------------------------------<br/>first lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 125 - 180 mm<br/>in conjunction with powerlock 93 - 180 mm<br/>tool circle fold cutters 130-160 mm<br/>adjustment axial 17 mm<br/>folding device<br/>marathoncoating in front of 1st lower tool holder<br/><br/>2. tool holder powerlock / hsk<br/>------------------------------<br/>first right tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for spindle 80 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/>electronic digital display for radial adjustment<br/>electronic digital display for axial adjustment<br/><br/>3. tool holder powerlock / hsk<br/>------------------------------<br/>first left tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for spindle 80 mm<br/>adjustment axial for powerlock 55 mm<br/><br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>4. tool holder powerlock / hsk<br/>------------------------------<br/>first upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>5. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>6. tool holder powerlock / hsk<br/>------------------------------<br/>second lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 225 mm<br/>maximum throat depth 15 mm<br/>adjustment axial 40 mm<br/>adjustment radial<br/>min. tool diameter to the table level 93 mm<br/>max. tool diameter 6 mm below table level 225 mm<br/>electronic digital display for radial adjustment<br/>electronic digital display for axial adjustment<br/><br/>all tool holders with high concentricity.<br/>lubrication points for the axial tool receiving movement.<br/><br/>feed system<br/>------------------------------<br/>frequency-controlled feed, 5 - 30 m / min.<br/>steplessly adjustable with brake 3 kw<br/>feed roller before 1. lower tool<br/>pneumatically controlled high-low<br/>durofer pointed toothed rollers (weinig patent)<br/>with depth limiter and self-cleaning<br/>adjustment of the feed rollers opposite<br/>left tool holder, axial 35 mm<br/><br/>cnc-controlled adjustment and positioning of the feed high / low in<br/>connection with the memory function<br/><br/>electrical machinery<br/>------------------------------<br/>operating voltage 400 volts<br/>(voltage range 380 x 420 volts), 50 hz<br/>electrical design according to din vde 0113,<br/>electrical equipment of industrial machinery<br/>en60204, iec-204-1. further electrical regulations<br/>are not included.<br/>control cabinet (with control panel) separate from<br/>machine, distance control cabinet machine: 2.5 m<br/><br/>machine stand, table and stops<br/>------------------------------<br/>table 2 m long (incl.<br/>manual waxilitpumpe for tischentarzung.<br/>a powered rubber roller in the exit table,<br/>50 mm wide.<br/><br/>pressure rollers and guides<br/>------------------------------<br/>pressure rollers from above, sprung<br/>lateral pressure roller on infeed table, sprung<br/><br/>machine operation<br/>------------------------------<br/>memory function<br/>to save the setting values of profiles.<br/>tool holder axes and pressure elements before and after<br/>the upper tool holder with<br/>electronic double ads.<br/>function:<br/>- save the settings of the manufactured profile by pressing a button<br/>under a profile number<br/>- when selecting the profile number again, the electronic<br/>double - display the setting values<br/>- by manually adjusting the tool holders and the<br/>print items are matched the ads<br/>- 99 memory locations<br/><br/>3 radial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with memory function, spindle no. 3,4,5<br/><br/>cnc - controlled adjustment and positioning of the feed<br/>high / low in conjunction with the memory function<br/><br/>safety and sound insulation<br/>------------------------------<br/>safety - full fairing<br/>easily foldable safety hood with window covers<br/>the entire work area and protects against mechanical<br/>hazards.<br/>when lifting the safety hood tool holders<br/>and feed automatically switched off.<br/>for ce version, the safety cover is opened during<br/>of automatic mode not possible.<br/>electromagnetic locking of the safety hood<br/>(only after the tools have come to a standstill, approx. 15 seconds,<br/>can the hood be opened)<br/>the machine comes with ce mark and its associated<br/>ec declaration of conformity delivered.<br/>interior light in the safety hood<br/>for ripping works e.g. sawing and multiple profiling,<br/>you need suitable protection devices.<br/><br/>option: planing heads + molding tools<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 6 ST.
WORKING WIDTH: 230 MM
WORKING HEIGHT: 120 MM
LENGTH OF THE PLANING TABLE: 2000 MM
FEED MOTOR: 3 KW
FEED SPEED: 5-30 M/MIN.
CONTROL: CNC
WEINIG POWERMAT 500 FOR WINDOW PRODUCTION WITH STRIP SEPARATION
-------------------------------------------------- ---------------------

EXECUTIVE SUMMARY:
-------------------------------------------------- ---------------------
6 SPINDLES HSK / POWERLOCK WITH 7.5 KW AND 8000 U / MIN EACH
WINDOW PACKAGE WITH GLAZING BEAD REMOVAL
WIDTH, HEIGHT AND FEED CONTROLLED BY MEMORY FUNCTION


DETAILED DESCRIPTION:
-------------------------------------------------- ---------------------

TECHNICAL SPECIFICATIONS:
-------------------------
WORKING WIDTH 20 - 230 MM (WITH TOOL CIRCLE 93 - 125 MM)
WORKING HEIGHT 8 - 120 MM (WITH TOOL CIRCLE 93 - 125 MM)

1. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 125 - 180 MM
IN CONJUNCTION WITH POWERLOCK 93 - 180 MM
TOOL CIRCLE FOLD CUTTERS 130-160 MM
ADJUSTMENT AXIAL 17 MM
FOLDING DEVICE
MARATHONCOATING IN FRONT OF 1ST LOWER TOOL HOLDER

2. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR SPINDLE 80 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

3. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR SPINDLE 80 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM

MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

4. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

5. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

6. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 225 MM
MAXIMUM THROAT DEPTH 15 MM
ADJUSTMENT AXIAL 40 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER TO THE TABLE LEVEL 93 MM
MAX. TOOL DIAMETER 6 MM BELOW TABLE LEVEL 225 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

ALL TOOL HOLDERS WITH HIGH CONCENTRICITY.
LUBRICATION POINTS FOR THE AXIAL TOOL RECEIVING MOVEMENT.

FEED SYSTEM
------------------------------
FREQUENCY-CONTROLLED FEED, 5 - 30 M / MIN.
STEPLESSLY ADJUSTABLE WITH BRAKE 3 KW
FEED ROLLER BEFORE 1. LOWER TOOL
PNEUMATICALLY CONTROLLED HIGH-LOW
DUROFER POINTED TOOTHED ROLLERS (WEINIG PATENT)
WITH DEPTH LIMITER AND SELF-CLEANING
ADJUSTMENT OF THE FEED ROLLERS OPPOSITE
LEFT TOOL HOLDER, AXIAL 35 MM

CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED HIGH / LOW IN
CONNECTION WITH THE MEMORY FUNCTION

ELECTRICAL MACHINERY
------------------------------
OPERATING VOLTAGE 400 VOLTS
(VOLTAGE RANGE 380 X 420 VOLTS), 50 HZ
ELECTRICAL DESIGN ACCORDING TO DIN VDE 0113,
ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINERY
EN60204, IEC-204-1. FURTHER ELECTRICAL REGULATIONS
ARE NOT INCLUDED.
CONTROL CABINET (WITH CONTROL PANEL) SEPARATE FROM
MACHINE, DISTANCE CONTROL CABINET MACHINE: 2.5 M

MACHINE STAND, TABLE AND STOPS
------------------------------
TABLE 2 M LONG (INCL.
MANUAL WAXILITPUMPE FOR TISCHENTARZUNG.
A POWERED RUBBER ROLLER IN THE EXIT TABLE,
50 MM WIDE.

PRESSURE ROLLERS AND GUIDES
------------------------------
PRESSURE ROLLERS FROM ABOVE, SPRUNG
LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG

MACHINE OPERATION
------------------------------
MEMORY FUNCTION
TO SAVE THE SETTING VALUES OF PROFILES.
TOOL HOLDER AXES AND PRESSURE ELEMENTS BEFORE AND AFTER
THE UPPER TOOL HOLDER WITH
ELECTRONIC DOUBLE ADS.
FUNCTION:
- SAVE THE SETTINGS OF THE MANUFACTURED PROFILE BY PRESSING A BUTTON
UNDER A PROFILE NUMBER
- WHEN SELECTING THE PROFILE NUMBER AGAIN, THE ELECTRONIC
DOUBLE - DISPLAY THE SETTING VALUES
- BY MANUALLY ADJUSTING THE TOOL HOLDERS AND THE
PRINT ITEMS ARE MATCHED THE ADS
- 99 MEMORY LOCATIONS

3 RADIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH MEMORY FUNCTION, SPINDLE NO. 3,4,5

CNC - CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED
HIGH / LOW IN CONJUNCTION WITH THE MEMORY FUNCTION

SAFETY AND SOUND INSULATION
------------------------------
SAFETY - FULL FAIRING
EASILY FOLDABLE SAFETY HOOD WITH WINDOW COVERS
THE ENTIRE WORK AREA AND PROTECTS AGAINST MECHANICAL
HAZARDS.
WHEN LIFTING THE SAFETY HOOD TOOL HOLDERS
AND FEED AUTOMATICALLY SWITCHED OFF.
FOR CE VERSION, THE SAFETY COVER IS OPENED DURING
OF AUTOMATIC MODE NOT POSSIBLE.
ELECTROMAGNETIC LOCKING OF THE SAFETY HOOD
(ONLY AFTER THE TOOLS HAVE COME TO A STANDSTILL, APPROX. 15 SECONDS,
CAN THE HOOD BE OPENED)
THE MACHINE COMES WITH CE MARK AND ITS ASSOCIATED
EC DECLARATION OF CONFORMITY DELIVERED.
INTERIOR LIGHT IN THE SAFETY HOOD
FOR RIPPING WORKS E.G. SAWING AND MULTIPLE PROFILING,
YOU NEED SUITABLE PROTECTION DEVICES.

OPTION: PLANING HEADS + MOLDING TOOLS

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)





Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-interior and surface grinding machine voumard rv 3 a bearing no 1105-02460 category internal and surface grinding machine make voumard type rv 3 a built in 1973 state second-hand machine control conventional storage haguenau country of origin switzerland delivery car t of cargo base in stock more info on request technical details inside diameter 100 mm grinding depth 300 mm swing 200 mm overall power 6 kw machine weight about 2.5 tons of space approx. 2.6 x 1.7 x 2.0 m description v o u m a r d (sc hweiz)
 hydr. internal grinding machine with plan grinding device
 type rv 3 a year of 1973 _

schleifbarer inside ã? 1 100 mm
 grinding depth max. approx. 200 mm
 peak height of the workpiece spindle stick 175 / 300 mm
 workpiece clamping ã? in blade 250 mm
 maximum work-piece length approx. 500 mm

table hub (loop slides) min/max 2 300 mm
 table speed infinitely variable 0 20 m / min
 number table strokes max. 300 rpm

displacement of the workpiece spindle head along 00 mm
 swivel d. of workpiece spindle stick-30 to + 90 â° degree

of the grinding spindle stick cross/radial displacement 40 mm
 displacement of axial grinding spindle stick 250 mm

delivery of the grinding head step by step 0 - 0.05 mm 6 speed of the workpiece spindle 125 1,000 u/min

grinding spindle drive approximately 2.5 kw
 total drive about 6 kw - 380 v - 50 hz
 weight 2.5 kg
 external dimensions lxwxh 2600 x 1700 x 2000 mm

optional accessories:

manually einschwenkbarerplanschleifapparat with micro delivery u. 
 dressing apparatus
 hf grinding spindle drive voumard with converter, spindle speed =.
 hydr. swivel matching device for grinding spindle
 hydraulic 3 - jaw chuck approx. 280 ã?, collet ã? 170 mm, various baking
 built-in control cabinet for the default loop values over
 potentiometer and digital counter, for the control of the dressing and for the compensation of the grinding mandrel deflection, delivery control via potentiometer, error messages, etc.
 coolant system separately standing, other accessories

condition: well in brief demonstration ready
 delivery: in stock - as seen
 payment: net - after receipt of the invoice

we ask for your order. more internal grinders in stock please enquire with us. 
 INTERIOR AND SURFACE GRINDING MACHINE VOUMARD RV 3 A BEARING NO 1105-02460 CATEGORY INTERNAL AND SURFACE GRINDING MACHINE MAKE VOUMARD TYPE RV 3 A BUILT IN 1973 STATE SECOND-HAND MACHINE CONTROL CONVENTIONAL STORAGE HAGUENAU COUNTRY OF ORIGIN SWITZERLAND DELIVERY CAR T OF CARGO BASE IN STOCK MORE INFO ON REQUEST TECHNICAL DETAILS INSIDE DIAMETER 100 MM GRINDING DEPTH 300 MM SWING 200 MM OVERALL POWER 6 KW MACHINE WEIGHT ABOUT 2.5 TONS OF SPACE APPROX. 2.6 X 1.7 X 2.0 M DESCRIPTION V O U M A R D (SC HWEIZ) HYDR. INTERNAL GRINDING MACHINE WITH PLAN GRINDING DEVICE TYPE RV 3 A YEAR OF 1973 _ SCHLEIFBARER INSIDE &ATILDE;? 1 100 MM GRINDING DEPTH MAX. APPROX. 200 MM PEAK HEIGHT OF THE WORKPIECE SPINDLE STICK 175 / 300 MM WORKPIECE CLAMPING &ATILDE;? IN BLADE 250 MM MAXIMUM WORK-PIECE LENGTH APPROX. 500 MM TABLE HUB (LOOP SLIDES) MIN/MAX 2 300 MM TABLE SPEED INFINITELY VARIABLE 0 20 M / MIN NUMBER TABLE STROKES MAX. 300 RPM DISPLACEMENT OF THE WORKPIECE SPINDLE HEAD ALONG 00 MM SWIVEL D. OF WORKPIECE SPINDLE STICK-30 TO + 90 &ACIRC;&DEG; DEGREE OF THE GRINDING SPINDLE STICK CROSS/RADIAL DISPLACEMENT 40 MM DISPLACEMENT OF AXIAL GRINDING SPINDLE STICK 250 MM DELIVERY OF THE GRINDING HEAD STEP BY STEP 0 - 0.05 MM 6 SPEED OF THE WORKPIECE SPINDLE 125 1,000 U/MIN GRINDING SPINDLE DRIVE APPROXIMATELY 2.5 KW TOTAL DRIVE ABOUT 6 KW - 380 V - 50 HZ WEIGHT 2.5 KG EXTERNAL DIMENSIONS LXWXH 2600 X 1700 X 2000 MM OPTIONAL ACCESSORIES: MANUALLY EINSCHWENKBARERPLANSCHLEIFAPPARAT WITH MICRO DELIVERY U. DRESSING APPARATUS HF GRINDING SPINDLE DRIVE VOUMARD WITH CONVERTER, SPINDLE SPEED =. HYDR. SWIVEL MATCHING DEVICE FOR GRINDING SPINDLE HYDRAULIC 3 - JAW CHUCK APPROX. 280 &ATILDE;?, COLLET &ATILDE;? 170 MM, VARIOUS BAKING BUILT-IN CONTROL CABINET FOR THE DEFAULT LOOP VALUES OVER POTENTIOMETER AND DIGITAL COUNTER, FOR THE CONTROL OF THE DRESSING AND FOR THE COMPENSATION OF THE GRINDING MANDREL DEFLECTION, DELIVERY CONTROL VIA POTENTIOMETER, ERROR MESSAGES, ETC. COOLANT SYSTEM SEPARATELY STANDING, OTHER ACCESSORIES CONDITION: WELL IN BRIEF DEMONSTRATION READY DELIVERY: IN STOCK - AS SEEN PAYMENT: NET - AFTER RECEIPT OF THE INVOICE WE ASK FOR YOUR ORDER. MORE INTERNAL GRINDERS IN STOCK PLEASE ENQUIRE WITH US.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 750 €
Ubicación: Land-fan, fan, electric motor, blower <br /><br />-output 2.2 kw <br /> -speed 1420 rpm <br />- fan diameter 720 mm <br /> -1x fan available <br />- prize piece <br />- dimensions 795/795 / h500 mm <br /> -weight 66 kg FAN, FAN, ELECTRIC MOTOR, BLOWER

-OUTPUT 2.2 KW
-SPEED 1420 RPM
- FAN DIAMETER 720 MM
-1X FAN AVAILABLE
- PRIZE PIECE
- DIMENSIONS 795/795 / H500 MM
-WEIGHT 66 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-the forging hammer lasco kh 315 can still be viewed under power.

a buyer of the machine gets free of charge:
-direct spring support
-spare parts worth about 11,000 eur

we bought the machine from presstrade in 2006.

then it was overhauled by hok maschinenbau gmbh:
-controller modification - new plc control system, control cabinet, foot switch with double pedal and two top switches to slow down and for the security module, oscilator, deep hole control bar, flange with cap on the tax staff drilled new piston rod for control bar,
-rework schabotte usage
-drive completely cleaned
-main valve - housing renewed, replaced piston
-hydraulic cylinders - honed cylinder tube
-control - valve on slow/slow cover - new, beat valve / rise - new, bosch valve - new filter screen - new steering pump - new
-hydraulic pump - axial disk - new, main spindle seat top and main spindle seat ground, below--cylindrical clean bushings new right spindle seat top, right spindle seat bottom, left spindle seat top, left spindle seat make, top, cylindrical clean polished, bushings make new
-management system - sleeve top - new guide bush down - new, safety ball, piston rod - new, piston - new, piston nuts - new
-cooling - new water cooling (air coolers, circulating pump, in-line filter)
-heating - new electric heater with flange connection on the tank lid
-hammer bear - after milling the guiding surfaces, for milling of die fugue, as well as radii and joint relief, repositioning radius in the rock hole, federal bear lock plate welded up, relaxed and refinish, clean out spindle hole bear lock plate and bush bear castle wedges shrink, - new buffer plate - turn bronze welding and customize bear castle rubbers on the new bore dimension in the hammer bear, aluminium - new, new, - drive fastening - intermediate rubber - new meggiflex - new,
-bar blocks - shims - new store plates, rails - new
-headstock - pass bar - new, rubber swing metal bars - new
-main engine - new storage, electrical winding checks
    THE FORGING HAMMER LASCO KH 315 CAN STILL BE VIEWED UNDER POWER. A BUYER OF THE MACHINE GETS FREE OF CHARGE: -DIRECT SPRING SUPPORT -SPARE PARTS WORTH ABOUT 11,000 EUR WE BOUGHT THE MACHINE FROM PRESSTRADE IN 2006. THEN IT WAS OVERHAULED BY HOK MASCHINENBAU GMBH: -CONTROLLER MODIFICATION - NEW PLC CONTROL SYSTEM, CONTROL CABINET, FOOT SWITCH WITH DOUBLE PEDAL AND TWO TOP SWITCHES TO SLOW DOWN AND FOR THE SECURITY MODULE, OSCILATOR, DEEP HOLE CONTROL BAR, FLANGE WITH CAP ON THE TAX STAFF DRILLED NEW PISTON ROD FOR CONTROL BAR, -REWORK SCHABOTTE USAGE -DRIVE COMPLETELY CLEANED -MAIN VALVE - HOUSING RENEWED, REPLACED PISTON -HYDRAULIC CYLINDERS - HONED CYLINDER TUBE -CONTROL - VALVE ON SLOW/SLOW COVER - NEW, BEAT VALVE / RISE - NEW, BOSCH VALVE - NEW FILTER SCREEN - NEW STEERING PUMP - NEW -HYDRAULIC PUMP - AXIAL DISK - NEW, MAIN SPINDLE SEAT TOP AND MAIN SPINDLE SEAT GROUND, BELOW--CYLINDRICAL CLEAN BUSHINGS NEW RIGHT SPINDLE SEAT TOP, RIGHT SPINDLE SEAT BOTTOM, LEFT SPINDLE SEAT TOP, LEFT SPINDLE SEAT MAKE, TOP, CYLINDRICAL CLEAN POLISHED, BUSHINGS MAKE NEW -MANAGEMENT SYSTEM - SLEEVE TOP - NEW GUIDE BUSH DOWN - NEW, SAFETY BALL, PISTON ROD - NEW, PISTON - NEW, PISTON NUTS - NEW -COOLING - NEW WATER COOLING (AIR COOLERS, CIRCULATING PUMP, IN-LINE FILTER) -HEATING - NEW ELECTRIC HEATER WITH FLANGE CONNECTION ON THE TANK LID -HAMMER BEAR - AFTER MILLING THE GUIDING SURFACES, FOR MILLING OF DIE FUGUE, AS WELL AS RADII AND JOINT RELIEF, REPOSITIONING RADIUS IN THE ROCK HOLE, FEDERAL BEAR LOCK PLATE WELDED UP, RELAXED AND REFINISH, CLEAN OUT SPINDLE HOLE BEAR LOCK PLATE AND BUSH BEAR CASTLE WEDGES SHRINK, - NEW BUFFER PLATE - TURN BRONZE WELDING AND CUSTOMIZE BEAR CASTLE RUBBERS ON THE NEW BORE DIMENSION IN THE HAMMER BEAR, ALUMINIUM - NEW, NEW, - DRIVE FASTENING - INTERMEDIATE RUBBER - NEW MEGGIFLEX - NEW, -BAR BLOCKS - SHIMS - NEW STORE PLATES, RAILS - NEW -HEADSTOCK - PASS BAR - NEW, RUBBER SWING METAL BARS - NEW -MAIN ENGINE - NEW STORAGE, ELECTRICAL WINDING CHECKS
Vendedor: KUZNIA Sulkowice SA
Año de construcción: usado
Ubicación: Land-turning diameter: 1500 mm<br/>turning length: 7920 mm<br/>control: haidenhain manual plus 620<br/>total power requirement: 76 kw<br/>weight of the machine ca.: 23,7 t<br/>dimensions of the machine ca.: 11,2 x 3,5 x 2,4 m<br/>1. turning diameter:<br/>over bed - 1500 mm<br/>over saddle 1020 mm<br/><br/>2. center:<br/>between centeres distance - 8000 mm<br/>center height - 755 mm<br/>max. longitudinal travel - 7920 mm<br/><br/>3. machining piece weigth:<br/>between centeres - 10.000 kg<br/>supported - 14.000 kg<br/><br/>4.machining forces:<br/>axial - 24.000 n<br/>tangential - 50. 000 n<br/>radial - 12.000 n<br/><br/>5. main spindle:<br/>speed range  2 - 630 rpm<br/>steeps - 3<br/>type - din 55026<br/>size - a2/15<br/>flange dia. - 398 mm<br/>tape - 1:10 / 260 mm<br/>max torque vs. speed - 12.000 nm / 30 rpm<br/><br/>6. feed:<br/>x axis work feed 1 - 1000 mm/min<br/>x axis rapid - 5.000 mm/min<br/><br/>z axis work feed 1 - 1000 mm/min<br/>z axis rapid 5.000 mm/ min<br/><br/>7. tail stock:<br/>ram size dia - 220 mm<br/>travel - 350 mm<br/>tape 1:20<br/>dia - 120 mm<br/>press force - 70.000 n<br/><br/>8. cnc<br/>mfg - heidenhain<br/>type - manualplus 620<br/><br/>9. support with rolls - small size:<br/>max diam - 420 mm<br/>min diam - 200 mm<br/><br/>support with rolls - big size:<br/>max diam - 630 mm<br/>min diam - 410 mm<br/><br/>overall dimensions: 11,2 x 3,5 x 2,4 m<br/><br/>power conection: 400 v/ 50hz<br/>total power: 76 kva<br/><br/>machine weight 23 700 kg<br/><br/>cnc heidenhain manual plus 620<br/><br/>sauter vdi 50<br/>chuck    630  mm<br/>face plate 1250 mm<br/>steady rest<br/>1  x  follwer steady<br/>1 x   steady rest 200-400 mm<br/>1 x   steady rest 400 - 600 mm<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 1500 MM
TURNING LENGTH: 7920 MM
CONTROL: HAIDENHAIN MANUAL PLUS 620
TOTAL POWER REQUIREMENT: 76 KW
WEIGHT OF THE MACHINE CA.: 23,7 T
DIMENSIONS OF THE MACHINE CA.: 11,2 X 3,5 X 2,4 M
1. TURNING DIAMETER:
OVER BED - 1500 MM
OVER SADDLE 1020 MM

2. CENTER:
BETWEEN CENTERES DISTANCE - 8000 MM
CENTER HEIGHT - 755 MM
MAX. LONGITUDINAL TRAVEL - 7920 MM

3. MACHINING PIECE WEIGTH:
BETWEEN CENTERES - 10.000 KG
SUPPORTED - 14.000 KG

4.MACHINING FORCES:
AXIAL - 24.000 N
TANGENTIAL - 50. 000 N
RADIAL - 12.000 N

5. MAIN SPINDLE:
SPEED RANGE 2 - 630 RPM
STEEPS - 3
TYPE - DIN 55026
SIZE - A2/15
FLANGE DIA. - 398 MM
TAPE - 1:10 / 260 MM
MAX TORQUE VS. SPEED - 12.000 NM / 30 RPM

6. FEED:
X AXIS WORK FEED 1 - 1000 MM/MIN
X AXIS RAPID - 5.000 MM/MIN

Z AXIS WORK FEED 1 - 1000 MM/MIN
Z AXIS RAPID 5.000 MM/ MIN

7. TAIL STOCK:
RAM SIZE DIA - 220 MM
TRAVEL - 350 MM
TAPE 1:20
DIA - 120 MM
PRESS FORCE - 70.000 N

8. CNC
MFG - HEIDENHAIN
TYPE - MANUALPLUS 620

9. SUPPORT WITH ROLLS - SMALL SIZE:
MAX DIAM - 420 MM
MIN DIAM - 200 MM

SUPPORT WITH ROLLS - BIG SIZE:
MAX DIAM - 630 MM
MIN DIAM - 410 MM

OVERALL DIMENSIONS: 11,2 X 3,5 X 2,4 M

POWER CONECTION: 400 V/ 50HZ
TOTAL POWER: 76 KVA

MACHINE WEIGHT 23 700 KG

CNC HEIDENHAIN MANUAL PLUS 620

SAUTER VDI 50
CHUCK 630 MM
FACE PLATE 1250 MM
STEADY REST
1 X FOLLWER STEADY
1 X STEADY REST 200-400 MM
1 X STEADY REST 400 - 600 MM









Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-1 compressor

make:sinil(korea)

year:1995

press: 25.0kg/?

 cap': 13.5?/min

 motor:125hp

 

 2 compressor

make:sinil(korea)

year:1995

press: 25.0kg/?

 cap':6?/min

 motor:60hp

 

3. blow molding machine x2sets

make:nissei(japan)

year:1995

model: asb - 650nh2

one stage biaxial

 orlentation stretch

pet reisn dryer?hopper:1set

  100kg/hr,

 mold dehunidifyer:1set

mold chilling:1set 

 

4 blow molding machine

make:nissei(japan)

year:1994

model: asb - 650nh

one stage biaxial

orlentation stretch

pet reisn dryer?hopper:1set

mold dehunidifyer:1set 

mold chilling:

 

 8 crusher

 make:daehung(korea)

 motor:20hp

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567   

  1 COMPRESSOR MAKE:SINIL(KOREA) YEAR:1995 PRESS: 25.0KG/? CAP': 13.5?/MIN MOTOR:125HP 2 COMPRESSOR MAKE:SINIL(KOREA) YEAR:1995 PRESS: 25.0KG/? CAP':6?/MIN MOTOR:60HP 3. BLOW MOLDING MACHINE X2SETS MAKE:NISSEI(JAPAN) YEAR:1995 MODEL: ASB - 650NH2 ONE STAGE BIAXIAL ORLENTATION STRETCH PET REISN DRYER?HOPPER:1SET 100KG/HR, MOLD DEHUNIDIFYER:1SET MOLD CHILLING:1SET 4 BLOW MOLDING MACHINE MAKE:NISSEI(JAPAN) YEAR:1994 MODEL: ASB - 650NH ONE STAGE BIAXIAL ORLENTATION STRETCH PET REISN DRYER?HOPPER:1SET MOLD DEHUNIDIFYER:1SET MOLD CHILLING: 8 CRUSHER MAKE:DAEHUNG(KOREA) MOTOR:20HP BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 5 st.<br/>spindle diameter: 50 mm<br/>weinig unicontrol 6 with cnc spindles<br/>...................................<br/><br/>technical data summary<br/>(possibly additionally included accessories please inquire)<br/>...................................<br/><br/>cut saw<br/>...................................<br/>crosscut saw electronically, horizontally infinitely adjustable<br/>number of tools: 1 pcs.<br/>spindle speed: 3000-6000 rpm<br/>spindle diameter: 40 mm<br/>tool diameter max .: 400 mm<br/>motor power: 3 kw<br/>adjustment radial pneumatically controlled 8 positions<br/>e.g. for edge rounding from above<br/>laser straightening light for detecting the sawing section<br/><br/>rounding unit<br/>...................................<br/>position: horizontally below<br/>motor power: 1.5 kw<br/>spindle diameter: 20 mm<br/>spindle speed: 9000 rpm<br/>tool circle max .: 130 mm<br/><br/>length stop cnc controlled<br/>...................................<br/>length 3500 mm<br/>electronic length stop<br/><br/>1. tenoning spindle<br/>...................................<br/>number of tools: variable, infinitely adjustable, cnc<br/>tool clamping length: 320 mm<br/>spindle stroke vertical: variable, adjustment stepless, cnc<br/>spindle speed: 3500 rpm<br/>spindle diameter: 50 mm<br/>tool diameter max .: 320 mm<br/>motor power: 11 kw<br/><br/>1. profiling spindle (synchronous spindle)<br/>...................................<br/>position: vertical right<br/>number of tools: 1 pcs.<br/>tool clamping length: 120 mm<br/>spindle speed: 6000 rpm<br/>spindle diameter: 50 mm<br/>tool circle max .: 232 mm<br/>motor power: 7.5 kw<br/><br/>2. profiling spindle<br/>...................................<br/>position: vertical right<br/>number of tools: variable, infinitely adjustable, cnc<br/>tool clamping length: 320 mm<br/>spindle stroke vertical: variable, adjustment stepless, cnc<br/>spindle speed: 6000 rpm<br/>spindle diameter: 50 mm<br/>tool circle max .: 232 mm<br/>motor power: 11 kw<br/><br/>3. grooving unit from above horizontally<br/>...................................<br/>adjustment axial 30 mm, pneumatically clocked 8 positions<br/>adjustment radial 125 mm, pneumatically clocked 8 positions<br/>spindle diameter: 40 mm<br/>clamping length: 40 mm<br/>motor power: 3 kw<br/>speed: 9000 rpm<br/><br/>4. profiling spindle (fitting spindle)<br/>...................................<br/>tool clamping length: 160 mm<br/>adjustment axial 115 mm, pneumatically clocked 8 positions<br/>adjustment radial 100 mm, pneumatically clocked 8 positions<br/>spindle speed: 5850 rpm<br/>spindle diameter: 40 mm<br/>tool circle max .: 210 mm<br/>motor power: 3.8 kw<br/><br/>5. grooving spindle horizontally from below<br/>...................................<br/>clamping length: 125 mm<br/>spindle diameter: 40 mm<br/>motor power: 3 kw<br/>speed: 5850 rpm<br/>tool circle max. 200 mm<br/>travel axial 100 mm, pneumatically clocked 8 positions<br/>adjustment radial 100 mm, pneumatically clocked 8 positions<br/><br/><br/>other features<br/>...................................<br/><br/>online capability<br/>storm proofing package (outside profiling of already pressed sashes)<br/>double piece package<br/>return conveyor for one-man operation:<br/>screen control<br/>angular window means<br/>electronic angle display for slanted windows<br/>control: pc nexus<br/>weinig type production program<br/><br/><br/>option:<br/>gebr. tool set for window<br/>oertli iv 67/77/92 wood<br/>iv 67/77 wood aluminum windows<br/>iv 67/77 entrance doors<br/><br/>detailed technical description can be found in the adjacent<br/>pdf file!<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 5 ST.
SPINDLE DIAMETER: 50 MM
WEINIG UNICONTROL 6 WITH CNC SPINDLES
...................................

TECHNICAL DATA SUMMARY
(POSSIBLY ADDITIONALLY INCLUDED ACCESSORIES PLEASE INQUIRE)
...................................

CUT SAW
...................................
CROSSCUT SAW ELECTRONICALLY, HORIZONTALLY INFINITELY ADJUSTABLE
NUMBER OF TOOLS: 1 PCS.
SPINDLE SPEED: 3000-6000 RPM
SPINDLE DIAMETER: 40 MM
TOOL DIAMETER MAX .: 400 MM
MOTOR POWER: 3 KW
ADJUSTMENT RADIAL PNEUMATICALLY CONTROLLED 8 POSITIONS
E.G. FOR EDGE ROUNDING FROM ABOVE
LASER STRAIGHTENING LIGHT FOR DETECTING THE SAWING SECTION

ROUNDING UNIT
...................................
POSITION: HORIZONTALLY BELOW
MOTOR POWER: 1.5 KW
SPINDLE DIAMETER: 20 MM
SPINDLE SPEED: 9000 RPM
TOOL CIRCLE MAX .: 130 MM

LENGTH STOP CNC CONTROLLED
...................................
LENGTH 3500 MM
ELECTRONIC LENGTH STOP

1. TENONING SPINDLE
...................................
NUMBER OF TOOLS: VARIABLE, INFINITELY ADJUSTABLE, CNC
TOOL CLAMPING LENGTH: 320 MM
SPINDLE STROKE VERTICAL: VARIABLE, ADJUSTMENT STEPLESS, CNC
SPINDLE SPEED: 3500 RPM
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 320 MM
MOTOR POWER: 11 KW

1. PROFILING SPINDLE (SYNCHRONOUS SPINDLE)
...................................
POSITION: VERTICAL RIGHT
NUMBER OF TOOLS: 1 PCS.
TOOL CLAMPING LENGTH: 120 MM
SPINDLE SPEED: 6000 RPM
SPINDLE DIAMETER: 50 MM
TOOL CIRCLE MAX .: 232 MM
MOTOR POWER: 7.5 KW

2. PROFILING SPINDLE
...................................
POSITION: VERTICAL RIGHT
NUMBER OF TOOLS: VARIABLE, INFINITELY ADJUSTABLE, CNC
TOOL CLAMPING LENGTH: 320 MM
SPINDLE STROKE VERTICAL: VARIABLE, ADJUSTMENT STEPLESS, CNC
SPINDLE SPEED: 6000 RPM
SPINDLE DIAMETER: 50 MM
TOOL CIRCLE MAX .: 232 MM
MOTOR POWER: 11 KW

3. GROOVING UNIT FROM ABOVE HORIZONTALLY
...................................
ADJUSTMENT AXIAL 30 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 125 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
SPINDLE DIAMETER: 40 MM
CLAMPING LENGTH: 40 MM
MOTOR POWER: 3 KW
SPEED: 9000 RPM

4. PROFILING SPINDLE (FITTING SPINDLE)
...................................
TOOL CLAMPING LENGTH: 160 MM
ADJUSTMENT AXIAL 115 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
SPINDLE SPEED: 5850 RPM
SPINDLE DIAMETER: 40 MM
TOOL CIRCLE MAX .: 210 MM
MOTOR POWER: 3.8 KW

5. GROOVING SPINDLE HORIZONTALLY FROM BELOW
...................................
CLAMPING LENGTH: 125 MM
SPINDLE DIAMETER: 40 MM
MOTOR POWER: 3 KW
SPEED: 5850 RPM
TOOL CIRCLE MAX. 200 MM
TRAVEL AXIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS


OTHER FEATURES
...................................

ONLINE CAPABILITY
STORM PROOFING PACKAGE (OUTSIDE PROFILING OF ALREADY PRESSED SASHES)
DOUBLE PIECE PACKAGE
RETURN CONVEYOR FOR ONE-MAN OPERATION:
SCREEN CONTROL
ANGULAR WINDOW MEANS
ELECTRONIC ANGLE DISPLAY FOR SLANTED WINDOWS
CONTROL: PC NEXUS
WEINIG TYPE PRODUCTION PROGRAM


OPTION:
GEBR. TOOL SET FOR WINDOW
OERTLI IV 67/77/92 WOOD
IV 67/77 WOOD ALUMINUM WINDOWS
IV 67/77 ENTRANCE DOORS

DETAILED TECHNICAL DESCRIPTION CAN BE FOUND IN THE ADJACENT
PDF FILE!




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 89.000 €
Ubicación: Land-technical parameters
maximum thickness of the rolled sheet metal 40 mm
working length of the rollers 3000 mm
maximum pre bending thickness  32 mm
number of driven rolls 3 pcs
the diameter of the roller no. 1 450 mm
the diameter of the roller no. 2 410 mm
the diameter of the roller no. 3 410 mm
machine weight 19 t

equipment
-digital position readouts.
-hardening treatment of the 3 rolls.
-conical hydraulic bending attachment.
-3 rolls driven hydraulic motorized with independent axial gear box on each roll.
-nr. 1 lateral support 2 ton capacity is included with the machine (not shown on the picture )  TECHNICAL PARAMETERS MAXIMUM THICKNESS OF THE ROLLED SHEET METAL 40 MM WORKING LENGTH OF THE ROLLERS 3000 MM MAXIMUM PRE BENDING THICKNESS 32 MM NUMBER OF DRIVEN ROLLS 3 PCS THE DIAMETER OF THE ROLLER NO. 1 450 MM THE DIAMETER OF THE ROLLER NO. 2 410 MM THE DIAMETER OF THE ROLLER NO. 3 410 MM MACHINE WEIGHT 19 T EQUIPMENT -DIGITAL POSITION READOUTS. -HARDENING TREATMENT OF THE 3 ROLLS. -CONICAL HYDRAULIC BENDING ATTACHMENT. -3 ROLLS DRIVEN HYDRAULIC MOTORIZED WITH INDEPENDENT AXIAL GEAR BOX ON EACH ROLL. -NR. 1 LATERAL SUPPORT 2 TON CAPACITY IS INCLUDED WITH THE MACHINE (NOT SHOWN ON THE PICTURE )
Vendedor: ERS MANAGEMENT LTD
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1711</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>lasercell 1005</td> </tr> <tr> <td>year:</td> <td>2005</td> </tr> <tr> <td>working area:</td> <td>x=3000 mm, y=1500mm, z=750 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>72.024h / 24.547h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>50 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>8100 mm</td> </tr> <tr> <td>width:</td> <td>9200 mm</td> </tr> <tr> <td>height:</td> <td>3500 mm</td> </tr> <tr> <td>weight:</td> <td> </td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong> </strong> </h3> <strong>standard configuration</strong> </h3>\n<strong> </strong> \n<strong>machine</strong>\n</h3>\n	<ul>\n	<li> </h3>travel: x-axis: 3000 mm, y-axis 1500 mm, z-axis750 mm</li>\n	<li>equipped for processing laser cutting and laser welding</li>\n	<li>connected value: 400 v/ 50 hz, iec standard</li>\n	<li>teach panel and complete teach software</li>\n	<li>automatic focus adjustment autolas plus</li>\n	<li>higher positioning of the machine body for two-station-operation</li>\n</ul>\n \n<strong>laser </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>laser unit: co2 - laser tlf 4000 small (compact) design, chiller with laserpac</li>\n	<li>logbook function, power cycles, laser power control, analog frequency modulation</li>\n	<li>targeting laser concentrical to the laser beam </li>\n</ul>\n \n<strong>focusing optics </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>1 high pressure cutting optic, 5 lens</li>\n	<li>setting device</li>\n	<li>teach probe for cutting head </li>\n	<li>welding head with focal length f = 200 mm, protective gas coaxial</li>\n</ul>\n \n<strong>working stations </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>2 x 3d support table, stationary</li>\n	<li>support tables: dimension 1000 x 1000 m</li>\n	<li>working height 900 mm</li>\n	<li>mobile partition panel for two-station-operation</li>\n</ul>\n \n<strong>safety</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>compact dust extractor (filtering installation) with oversized material collector and spark arrester, capacitiy 2000 m³/h, 400 v/ 50 hz</li>\n	<li>automatically-controlled fire extinguisher for suction unit</li>\n	<li>safety cabin with manual front sliding door</li>\n</ul>\n \n<strong>control</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>control: based on siemens sinumerik 840d open control system</li>\n</ul>\n \n<strong>additional equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong>\n	<ul>\n	<li>rotary axis</li>\n</ul>\n<h3>note:</h3> in combination with the option two-station-operation the rotary axis is only mounted on the right station (seen from the operators position). there is no counter bearing installed due to the limited space.\n\n	<ul>\n	<li>network connection via teleservice</li>\n	<li>digital user interface</li>\n</ul> </h3>\n</h3> \n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LM-1711
MANUFACTURER: TRUMPF
TYPE: LASERCELL 1005
YEAR: 2005
WORKING AREA: X=3000 MM, Y=1500MM, Z=750 MM
LASER RATED OUTPUT: 4000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 72.024H / 24.547H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 15 MM
MAX. SHEET THICK./AI: 10 MM
MAX. SPEED: 50 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 8100 MM
WIDTH: 9200 MM
HEIGHT: 3500 MM
WEIGHT:

\N \N \N STANDARD CONFIGURATION \N \NMACHINE\N\N
    \N
  • TRAVEL: X-AXIS: 3000 MM, Y-AXIS 1500 MM, Z-AXIS750 MM
  • \N
  • EQUIPPED FOR PROCESSING LASER CUTTING AND LASER WELDING
  • \N
  • CONNECTED VALUE: 400 V/ 50 HZ, IEC STANDARD
  • \N
  • TEACH PANEL AND COMPLETE TEACH SOFTWARE
  • \N
  • AUTOMATIC FOCUS ADJUSTMENT AUTOLAS PLUS
  • \N
  • HIGHER POSITIONING OF THE MACHINE BODY FOR TWO-STATION-OPERATION
  • \N
\N \NLASER \N \N
    \N
  • LASER UNIT: CO2 - LASER TLF 4000 SMALL (COMPACT) DESIGN, CHILLER WITH LASERPAC
  • \N
  • LOGBOOK FUNCTION, POWER CYCLES, LASER POWER CONTROL, ANALOG FREQUENCY MODULATION
  • \N
  • TARGETING LASER CONCENTRICAL TO THE LASER BEAM
  • \N
\N \NFOCUSING OPTICS \N \N
    \N
  • 1 HIGH PRESSURE CUTTING OPTIC, 5 LENS
  • \N
  • SETTING DEVICE
  • \N
  • TEACH PROBE FOR CUTTING HEAD
  • \N
  • WELDING HEAD WITH FOCAL LENGTH F = 200 MM, PROTECTIVE GAS COAXIAL
  • \N
\N \NWORKING STATIONS \N \N
    \N
  • 2 X 3D SUPPORT TABLE, STATIONARY
  • \N
  • SUPPORT TABLES: DIMENSION 1000 X 1000 M
  • \N
  • WORKING HEIGHT 900 MM
  • \N
  • MOBILE PARTITION PANEL FOR TWO-STATION-OPERATION
  • \N
\N \NSAFETY\N \N
    \N
  • COMPACT DUST EXTRACTOR (FILTERING INSTALLATION) WITH OVERSIZED MATERIAL COLLECTOR AND SPARK ARRESTER, CAPACITIY 2000 M³/H, 400 V/ 50 HZ
  • \N
  • AUTOMATICALLY-CONTROLLED FIRE EXTINGUISHER FOR SUCTION UNIT
  • \N
  • SAFETY CABIN WITH MANUAL FRONT SLIDING DOOR
  • \N
\N \NCONTROL\N \N
    \N
  • CONTROL: BASED ON SIEMENS SINUMERIK 840D OPEN CONTROL SYSTEM
  • \N
\N \NADDITIONAL EQUIPMENT \N \N \N
    \N
  • ROTARY AXIS
  • \N
\N

NOTE:

IN COMBINATION WITH THE OPTION TWO-STATION-OPERATION THE ROTARY AXIS IS ONLY MOUNTED ON THE RIGHT STATION (SEEN FROM THE OPERATORS POSITION). THERE IS NO COUNTER BEARING INSTALLED DUE TO THE LIMITED SPACE.\N\N
    \N
  • NETWORK CONNECTION VIA TELESERVICE
  • \N
  • DIGITAL USER INTERFACE
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-coolers, axial, gã¼ntner gfh 090.2 b 2x2n
manufacturer: gã¼ntner medium: water glycol 70 / 30%
medium temperature: 90⺠occurs c.austritt 70 âºc.
cooling capacity: 1000kw air temperature: 32âºc.
fans: 4 pieces, 2, 79kw, 400v, 50 hz, 3 wire
connection: dn65 occurs 1 x outlet 1 x dn65
dimensions: lxwxh = 5100x2291x1460mm
weight: 1096kg
sound pressure level: 63 db(a) distance of 10 m, year built: 2006
condition: good, tightness and fans jenbacher, dry tested cooler, dry air cooler, not cooler, drycooler, glycol coolant
         COOLERS, AXIAL, G&ATILDE;&FRAC14;NTNER GFH 090.2 B 2X2N MANUFACTURER: G&ATILDE;&FRAC14;NTNER MEDIUM: WATER GLYCOL 70 / 30% MEDIUM TEMPERATURE: 90&ACIRC;&ORDM; OCCURS C.AUSTRITT 70 &ACIRC;&ORDM;C. COOLING CAPACITY: 1000KW AIR TEMPERATURE: 32&ACIRC;&ORDM;C. FANS: 4 PIECES, 2, 79KW, 400V, 50 HZ, 3 WIRE CONNECTION: DN65 OCCURS 1 X OUTLET 1 X DN65 DIMENSIONS: LXWXH = 5100X2291X1460MM WEIGHT: 1096KG SOUND PRESSURE LEVEL: 63 DB(A) DISTANCE OF 10 M, YEAR BUILT: 2006 CONDITION: GOOD, TIGHTNESS AND FANS JENBACHER, DRY TESTED COOLER, DRY AIR COOLER, NOT COOLER, DRYCOOLER, GLYCOL COOLANT
Vendedor: MACOGEN
Año de construcción: usado
Ubicación: Land-turning diameter:350 mm<br/>turning length:600 mm<br/>control:fanuc 0i td mg <br/>max. swing diameter:500 mm<br/>max. swing over slide:350 mm<br/>spindle speeds:4500 1/min.<br/>bar material dia.:51 mm<br/>total power requirement:15/11 kw<br/>weight of the machine ca.:4,2 t<br/>c-axis: <br/>hollow chuck:hydr. 200 mm<br/>heat exchanger: <br/>chip conveyor: <br/>coolant system: <br/>ce-design: <br/>tool setter: <br/>live center:5 mk<br/>soft jaw: <br/>hard jaws: <br/>tool setter: <br/><br/>brand new cnc turning center with    1. control system fanuc 0i-td (8,4\ TURNING DIAMETER:350 MM
TURNING LENGTH:600 MM
CONTROL:FANUC 0I TD MG
MAX. SWING DIAMETER:500 MM
MAX. SWING OVER SLIDE:350 MM
SPINDLE SPEEDS:4500 1/MIN.
BAR MATERIAL DIA.:51 MM
TOTAL POWER REQUIREMENT:15/11 KW
WEIGHT OF THE MACHINE CA.:4,2 T
C-AXIS:
HOLLOW CHUCK:HYDR. 200 MM
HEAT EXCHANGER:
CHIP CONVEYOR:
COOLANT SYSTEM:
CE-DESIGN:
TOOL SETTER:
LIVE CENTER:5 MK
SOFT JAW:
HARD JAWS:
TOOL SETTER:

BRAND NEW CNC TURNING CENTER WITH 1. CONTROL SYSTEM FANUC 0I-TD (8,4\" LCD MONITOR) 2. X/Z-AXIS STROKE 170 / 400 MM 3. X/Z AXIS RAPID TRAVERSE 30 / 36 M/MIN 4. SPINDLE MOTOR 11 / 15 KW 5. SPINDLE SPEED 4.500 RPM 6. SPINDLE BAR CAPACITY DIA. 51 MM 7. CS AXIS FUNCTION 0,001 DEGREE SPINDLE POSITIONING 8. HYD. HOLLOW CHUCK 8\" X 3 JAWS 9. HYD. UNIT FOR CHUCK WITH AIR COOLER 10. POWER TURRET SYSTEM 12 STATIONS WITH VDI-30 AXIAL TYPE TURRET DISK 11. MANUAL TAILSTOCK STROKE 310MM + QUILL STROKE 100 MM 12. ELECTRIC CABINET WITH HEAT EXCHANGER 13. STANDARD SPLASH GUARD 14. COOLANT UNIT 15. TRANSFORMER (POWER SOURCE 380V} 16. CHIP CONVEYOR H=1100MM WITH TROLLEY (CHAIN TYPE) 17. MACHINE COLOUR TONGTAI GREY/BLUE 18. FANUC WARRANTY(WESTERN EUROPE) STANDARD ACCESSORIES: 1. SOFT JAWS X 1 SET 2. ROTATING CENTER X 1 PC (MT#5) OPTIONS: 1. CE MARK 2. PART CATCHER 3. BAR FEEDER BF-1200 TYPE 4. TOOL PRESETTER (BY MANUAL) 5. HARD JAWS 1 SET 6. MANUAL GUIDE I FUNCTION + 10,4\" LCD MONITOR
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-coolers, axial, helpman htd090. 124.850
manufacturer: helpman (alfa-laval) medium: water glycol 70 / 30%
medium temperature: entrance 90ã?⺠c.austritt 70ã?⺠c.
cooling power: 500kw
kã¼hlwasservolumestrom: 27 m3/h air temperature: 30ã?⺠c.
fans: 2 pieces, 3, 3kw, 400v, 50 hz, 3 wire
anschluaå¸: dn50, exit occurs 1 x 1 x dn50
dimensions: lxwxh = 3500x1215x1460mm
weight: 545kg
sound pressure level: 59 db (a) distance of 10 m, year built: 2006
condition: good, tightness and fans jenbacher, dry tested cooler, dry air cooler, not cooler, drycooler, glycol coolant
          COOLERS, AXIAL, HELPMAN HTD090. 124.850 MANUFACTURER: HELPMAN (ALFA-LAVAL) MEDIUM: WATER GLYCOL 70 / 30% MEDIUM TEMPERATURE: ENTRANCE 90&ATILDE;?&ACIRC;&ORDM; C.AUSTRITT 70&ATILDE;?&ACIRC;&ORDM; C. COOLING POWER: 500KW K&ATILDE;&FRAC14;HLWASSERVOLUMESTROM: 27 M3/H AIR TEMPERATURE: 30&ATILDE;?&ACIRC;&ORDM; C. FANS: 2 PIECES, 3, 3KW, 400V, 50 HZ, 3 WIRE ANSCHLUA&ARING;&CEDIL;: DN50, EXIT OCCURS 1 X 1 X DN50 DIMENSIONS: LXWXH = 3500X1215X1460MM WEIGHT: 545KG SOUND PRESSURE LEVEL: 59 DB (A) DISTANCE OF 10 M, YEAR BUILT: 2006 CONDITION: GOOD, TIGHTNESS AND FANS JENBACHER, DRY TESTED COOLER, DRY AIR COOLER, NOT COOLER, DRYCOOLER, GLYCOL COOLANT
Vendedor: MACOGEN
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1.000 mm<br/>gear width: 800 mm<br/>max. module: 18 <br/>min. module: 14 <br/>control: liebherr cnc <br/>min. number of teeth: 6 <br/>max. helix angle: +/- 50 °<br/>max. workpiece weight: 5.000 kg<br/>axial adjustment: 800 mm<br/>table diameter: 710 mm<br/>table bore diameter: 180 mm<br/>max. milling cutter diameter: 240 mm<br/>cutter length max.: 300 mm<br/>shifting: 200 mm<br/>milling tool taper: iso 50 <br/>feeds axial: 0,1 - 20 mm/wu<br/>tangential feed: 0,01 - 5 mm/wu<br/>radial feed: 0,1 - 4 mm/wu<br/>rapid traverse ( x / y / z ): 2 / 3 / 1 m/min<br/>total power requirement: 59 kva<br/>weight of the machine ca.: 18 t<br/>dimensions of the machine ca.: 7,0 x 3,5 x 4,0 m<br/>accessories:<br/>milling arbors diameter 32/40/50<br/>chip tranport<br/><br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1.000 MM
GEAR WIDTH: 800 MM
MAX. MODULE: 18
MIN. MODULE: 14
CONTROL: LIEBHERR CNC
MIN. NUMBER OF TEETH: 6
MAX. HELIX ANGLE: +/- 50 °
MAX. WORKPIECE WEIGHT: 5.000 KG
AXIAL ADJUSTMENT: 800 MM
TABLE DIAMETER: 710 MM
TABLE BORE DIAMETER: 180 MM
MAX. MILLING CUTTER DIAMETER: 240 MM
CUTTER LENGTH MAX.: 300 MM
SHIFTING: 200 MM
MILLING TOOL TAPER: ISO 50
FEEDS AXIAL: 0,1 - 20 MM/WU
TANGENTIAL FEED: 0,01 - 5 MM/WU
RADIAL FEED: 0,1 - 4 MM/WU
RAPID TRAVERSE ( X / Y / Z ): 2 / 3 / 1 M/MIN
TOTAL POWER REQUIREMENT: 59 KVA
WEIGHT OF THE MACHINE CA.: 18 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 3,5 X 4,0 M
ACCESSORIES:
MILLING ARBORS DIAMETER 32/40/50
CHIP TRANPORT






Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-spindle max. turning length. 150 mm
spindle speed range 4000 rpm/rpm 
max. turning length: 100 mm
number of motorized tools: 6 tools (3 axial, 3 radial)
max. pressure: 50kg/cm
lenght: 2000 mm
width: 1700 mm
height: 1900 mm 
weight: 4200 kg
there are two machines of the same type for sale. SPINDLE MAX. TURNING LENGTH. 150 MM SPINDLE SPEED RANGE 4000 RPM/RPM MAX. TURNING LENGTH: 100 MM NUMBER OF MOTORIZED TOOLS: 6 TOOLS (3 AXIAL, 3 RADIAL) MAX. PRESSURE: 50KG/CM LENGHT: 2000 MM WIDTH: 1700 MM HEIGHT: 1900 MM WEIGHT: 4200 KG THERE ARE TWO MACHINES OF THE SAME TYPE FOR SALE.
Vendedor: BASTA
Año de construcción: usado
Ubicación: Land-material diameter range: 6 mm<br/>cutting length max.: 1200 mm<br/>coil weight in kg: 1,5 kg<br/>number of working hours: 4.200 h<br/>weight: 650 kg<br/>dimensions of the machine ca.: 2,4x1,2x2,1 m<br/>cable processing fully automatic for coaxial cables<br/>for fully automatic fakra plug assembly<br/>for cable type lf-v4dv4)<br/>parts set lf-vydvy with universal gripper<br/>zerstöreinheit<br/>storage tray<br/>console for eurobox<br/>defects monitoring<br/>conversion kit for short lines 120-320 mm<br/>2-fold tool (base)<br/>doppelcrmpwerkzeug<br/>crimping tool flobal star 951<br/>measuring unit sl compact sf coupler<br/><br/><br/><br/><br/> MATERIAL DIAMETER RANGE: 6 MM
CUTTING LENGTH MAX.: 1200 MM
COIL WEIGHT IN KG: 1,5 KG
NUMBER OF WORKING HOURS: 4.200 H
WEIGHT: 650 KG
DIMENSIONS OF THE MACHINE CA.: 2,4X1,2X2,1 M
CABLE PROCESSING FULLY AUTOMATIC FOR COAXIAL CABLES
FOR FULLY AUTOMATIC FAKRA PLUG ASSEMBLY
FOR CABLE TYPE LF-V4DV4)
PARTS SET LF-VYDVY WITH UNIVERSAL GRIPPER
ZERSTöREINHEIT
STORAGE TRAY
CONSOLE FOR EUROBOX
DEFECTS MONITORING
CONVERSION KIT FOR SHORT LINES 120-320 MM
2-FOLD TOOL (BASE)
DOPPELCRMPWERKZEUG
CRIMPING TOOL FLOBAL STAR 951
MEASURING UNIT SL COMPACT SF COUPLER




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-coperating hours approx.: 35000	
control system:	
heidenhain manualplus 4110	
turning over bed: 400 mm	
turning over carriage: 230 mm	
turning length: 800 mm	
spindle bore: 64 mm	
speed range: 1-3000 rpm	
feed range plan:	
u 0.001-1000 mm	
accessories:	
chuck	
steady rest	
tailstock	
tool holder multifix b	
2 pieces driven tools (radial + axial)	
turret	
availability: 01.01.19 COPERATING HOURS APPROX.: 35000 CONTROL SYSTEM: HEIDENHAIN MANUALPLUS 4110 TURNING OVER BED: 400 MM TURNING OVER CARRIAGE: 230 MM TURNING LENGTH: 800 MM SPINDLE BORE: 64 MM SPEED RANGE: 1-3000 RPM FEED RANGE PLAN: U 0.001-1000 MM ACCESSORIES: CHUCK STEADY REST TAILSTOCK TOOL HOLDER MULTIFIX B 2 PIECES DRIVEN TOOLS (RADIAL + AXIAL) TURRET AVAILABILITY: 01.01.19
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 2.000.000 EU?
Ubicación: Land-complete line for the production of four types of coaxial radiating cables: rk-c, rk-w, rk-m, rl-j manufactured by the famous austrian company rosendahl. not used, installed and commissioned by factory service. COMPLETE LINE FOR THE PRODUCTION OF FOUR TYPES OF COAXIAL RADIATING CABLES: RK-C, RK-W, RK-M, RL-J MANUFACTURED BY THE FAMOUS AUSTRIAN COMPANY ROSENDAHL. NOT USED, INSTALLED AND COMMISSIONED BY FACTORY SERVICE.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 4.998 €
Ubicación: Land-poreba enveloping machine zfa 75 was produced in 1967 by fabryka urz?dze? mechanicznych POREBA ENVELOPING MACHINE ZFA 75 WAS PRODUCED IN 1967 BY FABRYKA URZ?DZE? MECHANICZNYCH "POREBA". THE MACHINE IS DESIGNED FOR THE PRODUCTION OF GEARS WITH STRAIGHT, OBLIQUE TEETH AND WORM GEARS. DURING OPERATION WITHOUT A STEADY HANDLE, IT ALLOWS FOR MACHINING WHEELS WITH A MAXIMUM DIAMETER OF 800 MM, AND WHEN WORKING WITH A STEADY SUPPORT, THE MAXIMUM DIAMETER OF THE WHEEL IS 450 MM. TECHNICAL DATA : THE LARGEST CUT-OUT MODULE: - NORMALLY: 6 MM - WITH REDUCED ACCURACY: 8 MM THE LARGEST DIAMETER OF THE GEAR BEING MACHINED: - WITH THE SUPPORT FIXED: 450 MM - WITHOUT A STEADY: 800 MM THE LARGEST DIAMETER OF A TOOTHED WHEEL WORK WITH HELICAL TEETH: - AT A HELIX ANGLE OF 30 °: 500 MM - AT A HELIX ANGLE OF 60 °: 190 MM THE LARGEST MILLING LENGTH FOR STRAIGHT TEETH: 275 MM RANGE OF DISTANCES BETWEEN THE WORKPIECE AXES AND THE MILLING CUTTER: - THE SMALLEST 30 MM - THE LARGEST 500 MM VERTICAL MILLING CUTTER: 310 MM THE SMALLEST DISTANCE FROM THE TABLE SURFACE TO THE MILLING CUTTER AXIS: 200 MM THE LARGEST DIAMETER OF THE MILLING CUTTER: 120 MM DIAMETER OF MANDRELS FOR SETTING THE CUTTERS: 22, 27, 32 MM DIAMETER OF THE HOLE ON THE TABLE: 80 MM THE NUMBER OF SPINDLES OF THE MILLING SPINDLE: 7 RANGE OF ROTATION OF THE MILLING SPINDLE: 47.5-192 VERTICAL CUTTER RANGE FOR 1 TURN OF THE WORKPIECE: 0.5-3 MM THE RANGE OF RADIAL FEEDS OF THE MILLING CUTTER FOR 1 TURN OF THE WORKPIECE: 0.1-1 MM THE RANGE OF AXIAL FEEDS OF THE MILLING CUTTER FOR 1 TURN OF THE WORKPIECE: 0.25-1 MM MAIN ENGINE POWER: 2.8 KW MACHINE DIMENSIONS: 2395 X 1210 X 1975 MM MILLING WEIGHT: 3800 KG EQUIPMENT: - A SET OF SHIFT WHEELS FOR THE GUITAR - CHANGE WHEELS FOR THE SECOND GUITAR: 7 PCS. - SPINDLES: 5 ITEMS - CONICAL WHEELS: 2 PCS - CLAW COUPLING - TESTS: 5 ITEMS - HOOK KEY - DTR - TECHNICAL AND OPERATIONAL DOCUMENTATION IT IS POSSIBLE TO BUY ADDITIONAL EQUIPMENT OF THE MACHINE, I.E.: - MODULAR CUTTERS WITH VARIOUS MODULES, FROM 1-8: 100 PIECES (ADDITIONAL FEE, PRICE: PLN 9990 NET, VISIBLE IN THE LAST TWO PHOTOS)
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Ubicación: Land-pressure: 3150 kn<br/>draw back pressure: ca. 500 kn<br/>passage width: 2100 mm<br/>stroke: 1700 mm<br/>total power requirement: ca. 50 kw<br/>weight of the machine ca.: 34 t<br/>dimensions of the machine ca.: ca. 2160 x 2750 x 6300 m<br/>machine was used for axially pressing of standing spoolings for major transformers!<br/><br/>further details please see pictures / pdfs<br/><br/><br/><br/><br/> PRESSURE: 3150 KN
DRAW BACK PRESSURE: CA. 500 KN
PASSAGE WIDTH: 2100 MM
STROKE: 1700 MM
TOTAL POWER REQUIREMENT: CA. 50 KW
WEIGHT OF THE MACHINE CA.: 34 T
DIMENSIONS OF THE MACHINE CA.: CA. 2160 X 2750 X 6300 M
MACHINE WAS USED FOR AXIALLY PRESSING OF STANDING SPOOLINGS FOR MAJOR TRANSFORMERS!

FURTHER DETAILS PLEASE SEE PICTURES / PDFS




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land- 
both sides boring machine
machine comes from one autobauer.ich the workpiece clamping down built so that illustrates how the machine is built. the collet can be axially adjusted and swivelled around 360 â° also.

the machine is dirty and also slightly rusted store laengetes.
if necessary i can also just the boring units + hydraulic emit or sell
 BOTH SIDES BORING MACHINE MACHINE COMES FROM ONE AUTOBAUER.ICH THE WORKPIECE CLAMPING DOWN BUILT SO THAT ILLUSTRATES HOW THE MACHINE IS BUILT. THE COLLET CAN BE AXIALLY ADJUSTED AND SWIVELLED AROUND 360 &ACIRC;&DEG; ALSO. THE MACHINE IS DIRTY AND ALSO SLIGHTLY RUSTED STORE LAENGETES. IF NECESSARY I CAN ALSO JUST THE BORING UNITS + HYDRAULIC EMIT OR SELL
Vendedor: Ostertag-Plastic
Año de construcción: usado
Ubicación: Land-rotation weight: 15 kg<br/>rotor dia: 250 mm<br/>height: 300 mm<br/>turning speeds: 200-1500 u/min<br/>engine output: 2 kw<br/>spindle diameter: 19-50 mm<br/>control: tira x 9000 <br/>drilling capacity diameter max.: 16 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,8 t<br/>dimensions of the machine ca.: 1,2x1,2x2,0 m<br/>for balancing disc-shaped rotors without their own shaft journals<br/>software for imbalance measurement, spindle stroke compensation and axial<br/>multiple drilling in the angle segment<br/>drilling unit with drilling machine bem 12<br/><br/>the device was modernized in 2014:<br/>tira x 900 win computer measurement system (windows 7)<br/><br/><br/><br/><br/> ROTATION WEIGHT: 15 KG
ROTOR DIA: 250 MM
HEIGHT: 300 MM
TURNING SPEEDS: 200-1500 U/MIN
ENGINE OUTPUT: 2 KW
SPINDLE DIAMETER: 19-50 MM
CONTROL: TIRA X 9000
DRILLING CAPACITY DIAMETER MAX.: 16 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,8 T
DIMENSIONS OF THE MACHINE CA.: 1,2X1,2X2,0 M
FOR BALANCING DISC-SHAPED ROTORS WITHOUT THEIR OWN SHAFT JOURNALS
SOFTWARE FOR IMBALANCE MEASUREMENT, SPINDLE STROKE COMPENSATION AND AXIAL
MULTIPLE DRILLING IN THE ANGLE SEGMENT
DRILLING UNIT WITH DRILLING MACHINE BEM 12

THE DEVICE WAS MODERNIZED IN 2014:
TIRA X 900 WIN COMPUTER MEASUREMENT SYSTEM (WINDOWS 7)




Vendedor: IMZ Maschinen Vertriebs GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more AXIAL types: