171 ofertas

Año de construcción: usado
Precio: 2.436 €
Ubicación: Land-machine works fine.

video available.

technical data:

brand: ooya

type: re2-1300 a

mk 4 x 1300

drilling head adjustment radial ca. 1000 mm
vertical stroke approx. 650 mm
speed range 32-1655 min-1
cube table

mass approx. 2,5 x 1 m x 2.7 m
weight approx. 3 to
 MACHINE WORKS FINE. VIDEO AVAILABLE. TECHNICAL DATA: BRAND: OOYA TYPE: RE2-1300 A MK 4 X 1300 DRILLING HEAD ADJUSTMENT RADIAL CA. 1000 MM VERTICAL STROKE APPROX. 650 MM SPEED RANGE 32-1655 MIN-1 CUBE TABLE MASS APPROX. 2,5 X 1 M X 2.7 M WEIGHT APPROX. 3 TO
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 700 x 750 x 900 mm<br/>description: good condition, little scratches tested an cleaned toner: 30-80% printed pages: 9.000-25.000 technologie: multifunction device type: b/w resolution: 1800 x 600dpi, scanresolution 1.200 x 1.200 dpi (color+bw) functions: scan color/sw, copy, fax, print(33 pages/min), network scanning ram: 256mb ports: usb 2.0, rj-45 (lan),rj-11 duplex: yes WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 750 X 900 MM
DESCRIPTION: GOOD CONDITION, LITTLE SCRATCHES TESTED AN CLEANED TONER: 30-80% PRINTED PAGES: 9.000-25.000 TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: B/W RESOLUTION: 1800 X 600DPI, SCANRESOLUTION 1.200 X 1.200 DPI (COLOR+BW) FUNCTIONS: SCAN COLOR/SW, COPY, FAX, PRINT(33 PAGES/MIN), NETWORK SCANNING RAM: 256MB PORTS: USB 2.0, RJ-45 (LAN),RJ-11 DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-capacity 3,500 kg, duplex mast, lifting height max. approx. 4,000 mm, elapsed operating hours 7655, part cabin
de:
treibgas-gabelstapler, fabr. linde, typ h35t, bj. 2008, ser.-nr. h2x393w05158, nenntragfähigkeit 3.500 kg, duplexmast, hubhöhe max. ca. 4.000 mm, abgel. betriebsstd. 7655, teilkabi
 CAPACITY 3,500 KG, DUPLEX MAST, LIFTING HEIGHT MAX. APPROX. 4,000 MM, ELAPSED OPERATING HOURS 7655, PART CABIN DE: TREIBGAS-GABELSTAPLER, FABR. LINDE, TYP H35T, BJ. 2008, SER.-NR. H2X393W05158, NENNTRAGFäHIGKEIT 3.500 KG, DUPLEXMAST, HUBHöHE MAX. CA. 4.000 MM, ABGEL. BETRIEBSSTD. 7655, TEILKABI
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 700 x 750 x 900 mm<br/>description: good condition, little scratches tested an cleaned toner: 30-80% printed pages: 9.000-25.000 technologie: multifunction device type: b/w resolution: 1800 x 600dpi, scanresolution 1.200 x 1.200 dpi (color+bw) functions: scan color/sw, copy, fax, print(33 pages/min), network scanning ram: 256mb ports: usb 2.0, rj-45 (lan),rj-11 duplex: yes WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 750 X 900 MM
DESCRIPTION: GOOD CONDITION, LITTLE SCRATCHES TESTED AN CLEANED TONER: 30-80% PRINTED PAGES: 9.000-25.000 TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: B/W RESOLUTION: 1800 X 600DPI, SCANRESOLUTION 1.200 X 1.200 DPI (COLOR+BW) FUNCTIONS: SCAN COLOR/SW, COPY, FAX, PRINT(33 PAGES/MIN), NETWORK SCANNING RAM: 256MB PORTS: USB 2.0, RJ-45 (LAN),RJ-11 DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cap. max. 300 kn, machine weight 800 kg, stroke 300 mm
de:
horizontal-richt- und biegemaschine, fabr. stierli bieger, typ 300 he/ce, bj. 2009, ser.-nr. a655, arbeitsdruck max. 300 kn, maschinengewicht 800 kg, hublänge 300 m
 CAP. MAX. 300 KN, MACHINE WEIGHT 800 KG, STROKE 300 MM DE: HORIZONTAL-RICHT- UND BIEGEMASCHINE, FABR. STIERLI BIEGER, TYP 300 HE/CE, BJ. 2009, SER.-NR. A655, ARBEITSDRUCK MAX. 300 KN, MASCHINENGEWICHT 800 KG, HUBLäNGE 300 M
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 700 x 750 x 900 mm<br/>description: good condition, little scratches tested an cleaned toner: 30-80% printed pages: 9.000-25.000 technologie: multifunction device type: b/w resolution: 1800 x 600dpi, scanresolution 1.200 x 1.200 dpi (color+bw) functions: scan color/sw, copy, fax, print(33 pages/min), network scanning ram: 256mb ports: usb 2.0, rj-45 (lan),rj-11 duplex: yes WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 750 X 900 MM
DESCRIPTION: GOOD CONDITION, LITTLE SCRATCHES TESTED AN CLEANED TONER: 30-80% PRINTED PAGES: 9.000-25.000 TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: B/W RESOLUTION: 1800 X 600DPI, SCANRESOLUTION 1.200 X 1.200 DPI (COLOR+BW) FUNCTIONS: SCAN COLOR/SW, COPY, FAX, PRINT(33 PAGES/MIN), NETWORK SCANNING RAM: 256MB PORTS: USB 2.0, RJ-45 (LAN),RJ-11 DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-filling line for csd and beer in pet bottles krones 4800 bph 
 
this pet line was installed in 2003 by krones, and is still in use until q2 of 2019. it has been filling beer and carbonated soft drinks in 1.0 to 2.5 liter bottles. the line is still installed and powered and can be dry tested. the blow molder needs thorough refurbishment, all other equipment are in good condition. the secondary packer has been used in shrink wrapping only, but it can be adapted for tray packing also. 
 
main technical data: 
 
manufacturer: 	krones (kosme), smi 
year: 	2003 
capacity: 	4000 bph, 1.0 ltr
	4600 bph, 1.5 ltr
	4000 bph, 2.0 and 2.5 ltr
neck format: 	pco 1810 long neck, 28 mm
operating hours: 	50 655 hrs 
control plc: 	siemens s7
 
main equipment: 
blow molder: 	kosme ksb 4000 serial no 4d117
flash pasteurizer: 	fisher eurocol 40 cgr, 60-220 hl/h, 16 bar, sn 27434 
filler: 	krones mecafill, tk-1440 vkp-pet 1.440-40-113 with 40 valves, 
k-121-756
rinser: 	krones variojet variojet 1.440-40-13, 40 nozzles, k-563-359
level inspector: 	stratec, toshiba d 0811 tubes  
labeler: 	krones contiroll 600-10, opp wrap-around label, hot melt glue 
data coder: 	domino 
secondary packer: 	smi lsk 30 t, 35 tact/h, shrink wrap and tray option, sn 8643 
 
 FILLING LINE FOR CSD AND BEER IN PET BOTTLES KRONES 4800 BPH THIS PET LINE WAS INSTALLED IN 2003 BY KRONES, AND IS STILL IN USE UNTIL Q2 OF 2019. IT HAS BEEN FILLING BEER AND CARBONATED SOFT DRINKS IN 1.0 TO 2.5 LITER BOTTLES. THE LINE IS STILL INSTALLED AND POWERED AND CAN BE DRY TESTED. THE BLOW MOLDER NEEDS THOROUGH REFURBISHMENT, ALL OTHER EQUIPMENT ARE IN GOOD CONDITION. THE SECONDARY PACKER HAS BEEN USED IN SHRINK WRAPPING ONLY, BUT IT CAN BE ADAPTED FOR TRAY PACKING ALSO. MAIN TECHNICAL DATA: MANUFACTURER: KRONES (KOSME), SMI YEAR: 2003 CAPACITY: 4000 BPH, 1.0 LTR 4600 BPH, 1.5 LTR 4000 BPH, 2.0 AND 2.5 LTR NECK FORMAT: PCO 1810 LONG NECK, 28 MM OPERATING HOURS: 50 655 HRS CONTROL PLC: SIEMENS S7 MAIN EQUIPMENT: BLOW MOLDER: KOSME KSB 4000 SERIAL NO 4D117 FLASH PASTEURIZER: FISHER EUROCOL 40 CGR, 60-220 HL/H, 16 BAR, SN 27434 FILLER: KRONES MECAFILL, TK-1440 VKP-PET 1.440-40-113 WITH 40 VALVES, K-121-756 RINSER: KRONES VARIOJET VARIOJET 1.440-40-13, 40 NOZZLES, K-563-359 LEVEL INSPECTOR: STRATEC, TOSHIBA D 0811 TUBES LABELER: KRONES CONTIROLL 600-10, OPP WRAP-AROUND LABEL, HOT MELT GLUE DATA CODER: DOMINO SECONDARY PACKER: SMI LSK 30 T, 35 TACT/H, SHRINK WRAP AND TRAY OPTION, SN 8643
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 700 x 750 x 900 mm<br/>description: good condition, little scratches tested an cleaned toner: 30-80% printed pages: 9.000-25.000 technologie: multifunction device type: b/w resolution: 1800 x 600dpi, scanresolution 1.200 x 1.200 dpi (color+bw) functions: scan color/sw, copy, fax, print(33 pages/min), network scanning ram: 256mb ports: usb 2.0, rj-45 (lan),rj-11 duplex: yes WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 750 X 900 MM
DESCRIPTION: GOOD CONDITION, LITTLE SCRATCHES TESTED AN CLEANED TONER: 30-80% PRINTED PAGES: 9.000-25.000 TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: B/W RESOLUTION: 1800 X 600DPI, SCANRESOLUTION 1.200 X 1.200 DPI (COLOR+BW) FUNCTIONS: SCAN COLOR/SW, COPY, FAX, PRINT(33 PAGES/MIN), NETWORK SCANNING RAM: 256MB PORTS: USB 2.0, RJ-45 (LAN),RJ-11 DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-compact machines for single - and holes of rows of. vertical bore down and horizontal hole

for the production of:
-holes series
-frame
-body connections
-frame reverse plugging
-45 â° reverse plugging
-90 â° reverse plugging

technical data:
-21 spindles - division 32 mm
 -3 pneumatic spannzylider
-manual adjustment of the drilling beam: 0 â°, 45 â° and 90
-maximum distance between drilling points: 640 mm
-maximum drilling depth: 75 mm
-table: 930 x 410 mm
-power of the engine: 2 hp
-air consumption 7 lt / cycle
-spindeldrehahl: 2,800 rpm
-manufact. working pressure; 6-8 atm
-weight: 360 kg
-dimensions lxwxh: ca. 1100 x 860 x 1320 mm
 COMPACT MACHINES FOR SINGLE - AND HOLES OF ROWS OF. VERTICAL BORE DOWN AND HORIZONTAL HOLE FOR THE PRODUCTION OF: -HOLES SERIES -FRAME -BODY CONNECTIONS -FRAME REVERSE PLUGGING -45 &ACIRC;&DEG; REVERSE PLUGGING -90 &ACIRC;&DEG; REVERSE PLUGGING TECHNICAL DATA: -21 SPINDLES - DIVISION 32 MM -3 PNEUMATIC SPANNZYLIDER -MANUAL ADJUSTMENT OF THE DRILLING BEAM: 0 &ACIRC;&DEG;, 45 &ACIRC;&DEG; AND 90 -MAXIMUM DISTANCE BETWEEN DRILLING POINTS: 640 MM -MAXIMUM DRILLING DEPTH: 75 MM -TABLE: 930 X 410 MM -POWER OF THE ENGINE: 2 HP -AIR CONSUMPTION 7 LT / CYCLE -SPINDELDREHAHL: 2,800 RPM -MANUFACT. WORKING PRESSURE; 6-8 ATM -WEIGHT: 360 KG -DIMENSIONS LXWXH: CA. 1100 X 860 X 1320 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 600 mm<br/>description: good condition.  tested an cleaned printed pages 20.000-max. 50.000 toner: 30%-80% password locked technologie: laserprinter type: bw  resolution: 1200 x 1200 dpi functions: print speed: up to 20 pages/minute  ram: 256 mb ram emulationen: pcl 6 (5c, xl)  interfaces: 1 x usb 2.0, 1x rj-45, usb-host , lan duplex: yes WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 600 MM
DESCRIPTION: GOOD CONDITION. TESTED AN CLEANED PRINTED PAGES 20.000-MAX. 50.000 TONER: 30%-80% PASSWORD LOCKED TECHNOLOGIE: LASERPRINTER TYPE: BW RESOLUTION: 1200 X 1200 DPI FUNCTIONS: PRINT SPEED: UP TO 20 PAGES/MINUTE RAM: 256 MB RAM EMULATIONEN: PCL 6 (5C, XL) INTERFACES: 1 X USB 2.0, 1X RJ-45, USB-HOST , LAN DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-11.0 general description of the basic machine:

1.1 basic machine:
the machine basic frame as well as the travelling column are statically and dynamically as a rigid welded construction.

the central plate of the editing support serves to accommodate of the processing units.
the control cabinet is right on the operator's side.

1.2 management system:
the movement of the axes (x - y - z) is carried out on all sides sealed linear guide systems.

1.3. propulsion system:
all the axes position position-controlled. the axis of movement is through hardened ball screw spindles, and per a brushless three-phase servomotor.

1.4 workpiece clamping:
6 pads are with two large-area vacuum cleaners available for clamping of the workpieces.

1.5 aggregate technique:
a vertical drilling unit, a horizontal boring unit, a pivoting nutsã¤ge and a upper end mill with tool changer are used as processing units.

1.6 electronics:
as a control system, all weeke machining centres are equipped with homatic 2000 system and the easy to use programming software woodwop.

1.7 safety equipment:
a dust - and soundproofing hood, as well as light barrier in the operating area secure the operating staff. rear or side guards are available depending on the requirement.

1.8 extraction:
a suction nozzle mounted centrally on the editing support allows for an easy connection to the central extraction system.

1.9 documentation:
a comprehensive and clear documentation of the machine is enclosed in simple design of the machine.

2.0 technical specification

2.0.1 machine

procedures
x 3350 mm
y axis 1200 mm
z axle 140 mm

work table
length 2750 mm
width 900 mm
document height 90 mm
(the processing amount may vary by the length of the tool)

travel speeds
x-axis 65 m / min
y axis 50 m / min
z axis 15 m / min

2.0.2 workpiece clamping
-4 adjustable in x direction adjustable work-piece supports, pneumatic relaxed - regulations on dust-protected, hardened and ground round management system
-2 copies of the workpiece is firmly fixed (left and right)
-8 programmatic work piece stops
-6 werkstã¼ckeinlegehilfen
-automatic cleaners and pad clamp
-vacuum pump 100 m3/h

2.1 aggregate technique:

1 vertical drilling unit with 18 programmatic spindles

travel range:
x direction 2750 mm with all spindles
y direction 914 mm all spindles
y direction to 1106 mm
-vorlegehub z-direction 40 mm
-drilling depth 38 mm
-direction of rotation left / right
-speed 1/min. 4250
-drive 1.5 kw, 50 hz, helical gears
-recording of drill 10 mm
-drilling diameter of 20 mm (18 spindles)
35 mm (2 shafts with reinforced execution)
-spindle distance 32 mm (16 spindles)
-spindles individually controllable
-arrangement 10 spindles x-direction (holes)
6 spindles y-direction (construction)
2 spindles x-direction (heavy duty)
-extraction central

1 horizontal boring unit with 4 screws (phillips)

travel range:
x direction 2750 mm with all spindles
y direction of 840 mm for the front side drilling
y direction of 710 mm for front drilling
-drilling height z-direction 38 mm
-drilling depth of 38 mm
-direction of rotation right
-speed 6050 rpm.
-drive 1.5 kw, 50 hz
-recording of drill 10 mm
-drilling diameter of 20 mm
-arrangement phillips

1 nutsã¤ge automatically swivel 90 degrees

travel range:

x direction 2750 mm (plus outlet)
y direction 1179 mm (at x position)
1099 mm (at y position)
-depth of cut: z direction 20 mm
-cutting cross-section: max. 60 mm2
-direction of rotation: right
-speed: 5590 u/min
-drive: 1.5 kw, 50 hz
-blade holder: 30 mm
-diameter: 150 mm
-blade thickness: max 8 mm
-rotation: 0 degrees and 90 degrees programmatically
-extraction: central

1 tool change spindles 7.5 kw
with tool change magazine

travel range:
x direction 2750 mm
y direction 1091 mm (minus wz wheel.)
-z direction per tool up to 85 mm (sep. list of tools)
-sleeve: for sk 30 - taper
-tool diameter: 100 mm
-tool weight: 3.5 kg incl. sleeve
-tool collection: automatically
-direction of rotation: right / left programmable
-speed: stepless 1250-18000 u/min programmable
-drive: frequency-controlled three-phase motor
-power: 7,5 kw
-spindle lubrication: grease, permanently lubricated
-cooling: liquid circulation cooling
-security: spindle prompt for sk 30 cone
-extraction: central
-magazine places: 6
-layout: on the right side of the engine (pickup-system)

2.2 general technical data:

machine dimensions:
machine length 4390 mm
machine width 3500 mm
machine height 2100 mm

dimensions:
length 5800 mm
6550 mm min. dimensions
width 3500 mm

connections:

pneumatic:
-compressed air 6 bar, r 1/2 inch with compressed air servicing unit
-air consumption approx. 10 nl

extraction:
-diameter d = 200
-consumption approx. 3400 m3/h
-air velocity 30 m/s
-vacuum 150 mm ws

electrics:
-installation according to the regulations of the vde
-protection class ip 54
-operating voltage 3 400 volts +/-5%,.
frequency 50 hz (this power not be respected, so a constant voltage transformers must be installed at the expense of the buyer.)
-connected load approx. 14 kw
machine weight: approximately 4250 kg
floor load: 200 n/cm2

2.3 control homatic 2000

2.3.1 hardware
industrial multi computer system
cnc path control is equipped with three position-controlled axes (x, y, and z). in the axes x, y, and z can be interpolated simultaneously, with each with 2 axes circular interpolation can be performed. the 3rd can axis as a linear axis are switched on. the integrated
plc takes over the control of all machine functions. all state messages (inputs and outputs) are indicated by leds

industrial pc (ipc)
the standard ipc takes over the tasks of the user guidance. all entries and the programming of the machine are made here to the ipc.
-486 ipc
-8 mb ram memory
-170 mbyte harddisk storage
-3 1/2 inch floppy drive
-serial interface rs 232 for serial data transmission up to 15 m
-free slot for network
14 inch, vga monitor, colour graphics

2.3.2 software
-automatic reference point driving all axes
-tool management with speed control and automatic tool compensation settlement
woodwop 2.5: the workshop-oriented programming system for trades and industry
-8-digit alphanumeric program and under program designation
-options (parameters) programming technology
-icon technology
-fault diagnosis
-block functions and sub-routine techniques with local and global parameters allocation
-zoom functions
-integration of algorithmic formulas in the workpiece programming
-zero offset
-automatic mirroring of the editors
-copying, duplicating and deleting editing types
-locking individual edits through allocation of conditions (and, or, equally, larger, smaller, etc...)
-graphical representation of workpiece the workpiece in 3 levels
-item search function
-bag cycle (circle, slot and rectangular pocket)
-ellipse function (inner - and outer ellipse)
-programming and presentation of the work-piece supports and vacuum cleaner
-optimization of the editor

g. 0001 number: 0036 1 piece
vakuumanschluã? f. templates re. side of the machine
vacuum connection for stencils incl. filter. with this facility, home-made vacuum stencils can be connected to the machine by means of hoses and couplings vacuum circuit.
 11.0 GENERAL DESCRIPTION OF THE BASIC MACHINE: 1.1 BASIC MACHINE: THE MACHINE BASIC FRAME AS WELL AS THE TRAVELLING COLUMN ARE STATICALLY AND DYNAMICALLY AS A RIGID WELDED CONSTRUCTION. THE CENTRAL PLATE OF THE EDITING SUPPORT SERVES TO ACCOMMODATE OF THE PROCESSING UNITS. THE CONTROL CABINET IS RIGHT ON THE OPERATOR'S SIDE. 1.2 MANAGEMENT SYSTEM: THE MOVEMENT OF THE AXES (X - Y - Z) IS CARRIED OUT ON ALL SIDES SEALED LINEAR GUIDE SYSTEMS. 1.3. PROPULSION SYSTEM: ALL THE AXES POSITION POSITION-CONTROLLED. THE AXIS OF MOVEMENT IS THROUGH HARDENED BALL SCREW SPINDLES, AND PER A BRUSHLESS THREE-PHASE SERVOMOTOR. 1.4 WORKPIECE CLAMPING: 6 PADS ARE WITH TWO LARGE-AREA VACUUM CLEANERS AVAILABLE FOR CLAMPING OF THE WORKPIECES. 1.5 AGGREGATE TECHNIQUE: A VERTICAL DRILLING UNIT, A HORIZONTAL BORING UNIT, A PIVOTING NUTS&ATILDE;&CURREN;GE AND A UPPER END MILL WITH TOOL CHANGER ARE USED AS PROCESSING UNITS. 1.6 ELECTRONICS: AS A CONTROL SYSTEM, ALL WEEKE MACHINING CENTRES ARE EQUIPPED WITH HOMATIC 2000 SYSTEM AND THE EASY TO USE PROGRAMMING SOFTWARE WOODWOP. 1.7 SAFETY EQUIPMENT: A DUST - AND SOUNDPROOFING HOOD, AS WELL AS LIGHT BARRIER IN THE OPERATING AREA SECURE THE OPERATING STAFF. REAR OR SIDE GUARDS ARE AVAILABLE DEPENDING ON THE REQUIREMENT. 1.8 EXTRACTION: A SUCTION NOZZLE MOUNTED CENTRALLY ON THE EDITING SUPPORT ALLOWS FOR AN EASY CONNECTION TO THE CENTRAL EXTRACTION SYSTEM. 1.9 DOCUMENTATION: A COMPREHENSIVE AND CLEAR DOCUMENTATION OF THE MACHINE IS ENCLOSED IN SIMPLE DESIGN OF THE MACHINE. 2.0 TECHNICAL SPECIFICATION 2.0.1 MACHINE PROCEDURES X 3350 MM Y AXIS 1200 MM Z AXLE 140 MM WORK TABLE LENGTH 2750 MM WIDTH 900 MM DOCUMENT HEIGHT 90 MM (THE PROCESSING AMOUNT MAY VARY BY THE LENGTH OF THE TOOL) TRAVEL SPEEDS X-AXIS 65 M / MIN Y AXIS 50 M / MIN Z AXIS 15 M / MIN 2.0.2 WORKPIECE CLAMPING -4 ADJUSTABLE IN X DIRECTION ADJUSTABLE WORK-PIECE SUPPORTS, PNEUMATIC RELAXED - REGULATIONS ON DUST-PROTECTED, HARDENED AND GROUND ROUND MANAGEMENT SYSTEM -2 COPIES OF THE WORKPIECE IS FIRMLY FIXED (LEFT AND RIGHT) -8 PROGRAMMATIC WORK PIECE STOPS -6 WERKST&ATILDE;&FRAC14;CKEINLEGEHILFEN -AUTOMATIC CLEANERS AND PAD CLAMP -VACUUM PUMP 100 M3/H 2.1 AGGREGATE TECHNIQUE: 1 VERTICAL DRILLING UNIT WITH 18 PROGRAMMATIC SPINDLES TRAVEL RANGE: X DIRECTION 2750 MM WITH ALL SPINDLES Y DIRECTION 914 MM ALL SPINDLES Y DIRECTION TO 1106 MM -VORLEGEHUB Z-DIRECTION 40 MM -DRILLING DEPTH 38 MM -DIRECTION OF ROTATION LEFT / RIGHT -SPEED 1/MIN. 4250 -DRIVE 1.5 KW, 50 HZ, HELICAL GEARS -RECORDING OF DRILL 10 MM -DRILLING DIAMETER OF 20 MM (18 SPINDLES) 35 MM (2 SHAFTS WITH REINFORCED EXECUTION) -SPINDLE DISTANCE 32 MM (16 SPINDLES) -SPINDLES INDIVIDUALLY CONTROLLABLE -ARRANGEMENT 10 SPINDLES X-DIRECTION (HOLES) 6 SPINDLES Y-DIRECTION (CONSTRUCTION) 2 SPINDLES X-DIRECTION (HEAVY DUTY) -EXTRACTION CENTRAL 1 HORIZONTAL BORING UNIT WITH 4 SCREWS (PHILLIPS) TRAVEL RANGE: X DIRECTION 2750 MM WITH ALL SPINDLES Y DIRECTION OF 840 MM FOR THE FRONT SIDE DRILLING Y DIRECTION OF 710 MM FOR FRONT DRILLING -DRILLING HEIGHT Z-DIRECTION 38 MM -DRILLING DEPTH OF 38 MM -DIRECTION OF ROTATION RIGHT -SPEED 6050 RPM. -DRIVE 1.5 KW, 50 HZ -RECORDING OF DRILL 10 MM -DRILLING DIAMETER OF 20 MM -ARRANGEMENT PHILLIPS 1 NUTS&ATILDE;&CURREN;GE AUTOMATICALLY SWIVEL 90 DEGREES TRAVEL RANGE: X DIRECTION 2750 MM (PLUS OUTLET) Y DIRECTION 1179 MM (AT X POSITION) 1099 MM (AT Y POSITION) -DEPTH OF CUT: Z DIRECTION 20 MM -CUTTING CROSS-SECTION: MAX. 60 MM2 -DIRECTION OF ROTATION: RIGHT -SPEED: 5590 U/MIN -DRIVE: 1.5 KW, 50 HZ -BLADE HOLDER: 30 MM -DIAMETER: 150 MM -BLADE THICKNESS: MAX 8 MM -ROTATION: 0 DEGREES AND 90 DEGREES PROGRAMMATICALLY -EXTRACTION: CENTRAL 1 TOOL CHANGE SPINDLES 7.5 KW WITH TOOL CHANGE MAGAZINE TRAVEL RANGE: X DIRECTION 2750 MM Y DIRECTION 1091 MM (MINUS WZ WHEEL.) -Z DIRECTION PER TOOL UP TO 85 MM (SEP. LIST OF TOOLS) -SLEEVE: FOR SK 30 - TAPER -TOOL DIAMETER: 100 MM -TOOL WEIGHT: 3.5 KG INCL. SLEEVE -TOOL COLLECTION: AUTOMATICALLY -DIRECTION OF ROTATION: RIGHT / LEFT PROGRAMMABLE -SPEED: STEPLESS 1250-18000 U/MIN PROGRAMMABLE -DRIVE: FREQUENCY-CONTROLLED THREE-PHASE MOTOR -POWER: 7,5 KW -SPINDLE LUBRICATION: GREASE, PERMANENTLY LUBRICATED -COOLING: LIQUID CIRCULATION COOLING -SECURITY: SPINDLE PROMPT FOR SK 30 CONE -EXTRACTION: CENTRAL -MAGAZINE PLACES: 6 -LAYOUT: ON THE RIGHT SIDE OF THE ENGINE (PICKUP-SYSTEM) 2.2 GENERAL TECHNICAL DATA: MACHINE DIMENSIONS: MACHINE LENGTH 4390 MM MACHINE WIDTH 3500 MM MACHINE HEIGHT 2100 MM DIMENSIONS: LENGTH 5800 MM 6550 MM MIN. DIMENSIONS WIDTH 3500 MM CONNECTIONS: PNEUMATIC: -COMPRESSED AIR 6 BAR, R 1/2 INCH WITH COMPRESSED AIR SERVICING UNIT -AIR CONSUMPTION APPROX. 10 NL EXTRACTION: -DIAMETER D = 200 -CONSUMPTION APPROX. 3400 M3/H -AIR VELOCITY 30 M/S -VACUUM 150 MM WS ELECTRICS: -INSTALLATION ACCORDING TO THE REGULATIONS OF THE VDE -PROTECTION CLASS IP 54 -OPERATING VOLTAGE 3 400 VOLTS +/-5%,. FREQUENCY 50 HZ (THIS POWER NOT BE RESPECTED, SO A CONSTANT VOLTAGE TRANSFORMERS MUST BE INSTALLED AT THE EXPENSE OF THE BUYER.) -CONNECTED LOAD APPROX. 14 KW MACHINE WEIGHT: APPROXIMATELY 4250 KG FLOOR LOAD: 200 N/CM2 2.3 CONTROL HOMATIC 2000 2.3.1 HARDWARE INDUSTRIAL MULTI COMPUTER SYSTEM CNC PATH CONTROL IS EQUIPPED WITH THREE POSITION-CONTROLLED AXES (X, Y, AND Z). IN THE AXES X, Y, AND Z CAN BE INTERPOLATED SIMULTANEOUSLY, WITH EACH WITH 2 AXES CIRCULAR INTERPOLATION CAN BE PERFORMED. THE 3RD CAN AXIS AS A LINEAR AXIS ARE SWITCHED ON. THE INTEGRATED PLC TAKES OVER THE CONTROL OF ALL MACHINE FUNCTIONS. ALL STATE MESSAGES (INPUTS AND OUTPUTS) ARE INDICATED BY LEDS INDUSTRIAL PC (IPC) THE STANDARD IPC TAKES OVER THE TASKS OF THE USER GUIDANCE. ALL ENTRIES AND THE PROGRAMMING OF THE MACHINE ARE MADE HERE TO THE IPC. -486 IPC -8 MB RAM MEMORY -170 MBYTE HARDDISK STORAGE -3 1/2 INCH FLOPPY DRIVE -SERIAL INTERFACE RS 232 FOR SERIAL DATA TRANSMISSION UP TO 15 M -FREE SLOT FOR NETWORK 14 INCH, VGA MONITOR, COLOUR GRAPHICS 2.3.2 SOFTWARE -AUTOMATIC REFERENCE POINT DRIVING ALL AXES -TOOL MANAGEMENT WITH SPEED CONTROL AND AUTOMATIC TOOL COMPENSATION SETTLEMENT WOODWOP 2.5: THE WORKSHOP-ORIENTED PROGRAMMING SYSTEM FOR TRADES AND INDUSTRY -8-DIGIT ALPHANUMERIC PROGRAM AND UNDER PROGRAM DESIGNATION -OPTIONS (PARAMETERS) PROGRAMMING TECHNOLOGY -ICON TECHNOLOGY -FAULT DIAGNOSIS -BLOCK FUNCTIONS AND SUB-ROUTINE TECHNIQUES WITH LOCAL AND GLOBAL PARAMETERS ALLOCATION -ZOOM FUNCTIONS -INTEGRATION OF ALGORITHMIC FORMULAS IN THE WORKPIECE PROGRAMMING -ZERO OFFSET -AUTOMATIC MIRRORING OF THE EDITORS -COPYING, DUPLICATING AND DELETING EDITING TYPES -LOCKING INDIVIDUAL EDITS THROUGH ALLOCATION OF CONDITIONS (AND, OR, EQUALLY, LARGER, SMALLER, ETC...) -GRAPHICAL REPRESENTATION OF WORKPIECE THE WORKPIECE IN 3 LEVELS -ITEM SEARCH FUNCTION -BAG CYCLE (CIRCLE, SLOT AND RECTANGULAR POCKET) -ELLIPSE FUNCTION (INNER - AND OUTER ELLIPSE) -PROGRAMMING AND PRESENTATION OF THE WORK-PIECE SUPPORTS AND VACUUM CLEANER -OPTIMIZATION OF THE EDITOR G. 0001 NUMBER: 0036 1 PIECE VAKUUMANSCHLU&ATILDE;? F. TEMPLATES RE. SIDE OF THE MACHINE VACUUM CONNECTION FOR STENCILS INCL. FILTER. WITH THIS FACILITY, HOME-MADE VACUUM STENCILS CAN BE CONNECTED TO THE MACHINE BY MEANS OF HOSES AND COUPLINGS VACUUM CIRCUIT.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 600 mm<br/>description: good condition.  tested an cleaned printed pages 20.000-max. 50.000 toner: 30%-80% password locked technologie: laserprinter type: bw  resolution: 1200 x 1200 dpi functions: print speed: up to 20 pages/minute  ram: 256 mb ram emulationen: pcl 6 (5c, xl)  interfaces: 1 x usb 2.0, 1x rj-45, usb-host , lan duplex: yes WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 600 MM
DESCRIPTION: GOOD CONDITION. TESTED AN CLEANED PRINTED PAGES 20.000-MAX. 50.000 TONER: 30%-80% PASSWORD LOCKED TECHNOLOGIE: LASERPRINTER TYPE: BW RESOLUTION: 1200 X 1200 DPI FUNCTIONS: PRINT SPEED: UP TO 20 PAGES/MINUTE RAM: 256 MB RAM EMULATIONEN: PCL 6 (5C, XL) INTERFACES: 1 X USB 2.0, 1X RJ-45, USB-HOST , LAN DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 250.000 €
Ubicación: Land-    washing and sterilizing line for glass containers used in pharmaceutical industry, consisting of:

    linear washer - hydra 1000 6 c

    the machine ensures the removal of at least 3 log. of particulate contamination (particles such as glass, fibres, oxides, etc.). the machine has been designed and manufactured conforming to cgmp standards.

    technical data

    operating speed: up to 7.200 containers / hour
    size range of the containers: min. diam. 20 mm max. diam. 52 mm
    w.f.i consumption - depending on container size/machine speed
    demineralized water consumption (optional) (depending on container size/machine speed)
    compressed air consumption : (depending on containers size/machine speed)
    steams exhaust fan capacity : max. 800 m3/hour

    w.f.i. supply pressure: 2,5-4 bar (1,5 WASHING AND STERILIZING LINE FOR GLASS CONTAINERS USED IN PHARMACEUTICAL INDUSTRY, CONSISTING OF: LINEAR WASHER - HYDRA 1000 6 C THE MACHINE ENSURES THE REMOVAL OF AT LEAST 3 LOG. OF PARTICULATE CONTAMINATION (PARTICLES SUCH AS GLASS, FIBRES, OXIDES, ETC.). THE MACHINE HAS BEEN DESIGNED AND MANUFACTURED CONFORMING TO CGMP STANDARDS. TECHNICAL DATA OPERATING SPEED: UP TO 7.200 CONTAINERS / HOUR SIZE RANGE OF THE CONTAINERS: MIN. DIAM. 20 MM MAX. DIAM. 52 MM W.F.I CONSUMPTION - DEPENDING ON CONTAINER SIZE/MACHINE SPEED DEMINERALIZED WATER CONSUMPTION (OPTIONAL) (DEPENDING ON CONTAINER SIZE/MACHINE SPEED) COMPRESSED AIR CONSUMPTION : (DEPENDING ON CONTAINERS SIZE/MACHINE SPEED) STEAMS EXHAUST FAN CAPACITY : MAX. 800 M3/HOUR W.F.I. SUPPLY PRESSURE: 2,5-4 BAR (1,5" TRI-CLOVER CLAMP) DEMINERALIZED WATER SUPPLY PRESSURE : 2,5-4 BAR (1,5" TRI-CLOVER CLAMP) COMPRESSED AIR SUPPLY PRESSURE : 6 - 10 BAR (1,5" TRI-CLOVER CLAMP) STANDARD POWER SUPPLY VOLTAGE : 400 VOLTS-50 HZ- 3 PHASE + N + G INSTALLED POWER: 5 KW HEAT LOSS: 4 KW SOUND EMISSION LEVEL: < 80 DB. HEIGHT OF UNLOADING SURFACE: 950 MM.(+/- 25) MM **MACHINE DIMENSIONS: WIDTH 1650 MM LENGTH 3655 MM HEIGHT 2000 MM **MACHINE WEIGHT: 1650 KG ENVIROMENTAL DATA: TEMPERATURE 5-40°C RELATIVE HUMIDITY <70% ALTITUDE < 2000 METERS --------------------------------------------------------------------------------- STERILIZING TUNNEL - BLUE GALAXY 550 FL THE TUNNEL HAS BEEN DESIGNED FOR INSERTION INTO PRODUCTION LINES REQUIRING CONTINUOUS DRY HEAT DEPYROGENATION OF GLASS CONTAINERS. EXPOSED TO A VERTICAL FLOW OF HEATED AIR (MAXIMUM WORKING TEMPERATURE 350°C), THE CONTAINER, AT ITS COLDEST POINT, REACHES TEMPERATURES EQUIVALENT TO 250° C FOR 15 MINUTES (3 LOG. DEPYROGENATION, REF. E.COLI 055-B5, WHERE Z=46,4°C, D-5 MIN., T.REF.=250°C). CLASS 5 AIR ACCORDING TO ISO 14644 IS GUARANTEED FOR THE ENTIRE LENGTH OF THE TUNNEL. TECHNICAL SPECIFICATION STANDARD POWER SUPPLY: 400 VOLT - 50 HZ. - 3 PH + N + T POWER MAIN (HEATING) . 30 KW COLD CHAMBER 24 KW UPS (FANS) 9 KW INSTALLED POWER 63 KW AIR TEMPERATURE HEATING ZONE (AT SPEED): MAX. 350°C AIR TEMPERATURE COOLING ZONE (AT SPEED): MAX. 18°C FINAL TEMPERATURE CONTAINERS AT OUTFEED: 25°C COOLING WATER: -TEMPERATURE AT INFEED: 9 - 11°C MAX. -FLOW RATE: 5000 LT/H. ASPIRATION AT INFEED ZONE (AT SPEED): 950 M3/H. AIR EXPELLED FROM INFEED ZONE(AT SPEED): 800 M3/H. TEMP. AIR EXPELLED FROM INFEED ZONE: 30-70°C AIR SUPPLY IN HEATING ZONE (AT SPEED): 200 M3/H. RECYCLED AIR FLOW RATE: - HEATING ZONE: 1200 M3/H. - COOLING ZONE: 1440 M3/H. HEAT LOSS IN THE ENVIRONMENT: APPROX. 9 KW. DIMENSIONS AND WEIGHTS - LENGTH: 3050 MM - WIDTH: 1705 MM -HEIGHT: 2980 MM -WEIGHT 2900 KG -USEFUL BELT HEIGHT 950 +/- 25 MM -USEFUL BELT WIDTH 550 MM -USEFUL HOT ZONE LENGTH 904 MM -USEFUL HOT ZONE SURFACE 0,50 M2 -USEFUL COOLING ZONE LENGTH 1044 MM -USEFUL COOLING ZONE SURFACE 0,57 M2 THE LINES WERE MANUFACTURED AND DELIVERED IN 2015 (NOVEMBER). THE LINES AFTER DELIVERY WERE NEVER USED; THEY ARE PACKED HERMETICALLY AND STORED IN THIS CONDITION. BEFORE THE DELIVERY, THE LINES WERE SUBJECTED TO THE MANUFACTURER'S FAT TESTS (FACTORY ACCEPTANCE TEST), WHICH WAS CONFIRMED BY THE PROTOCOL CONFIRMING THAT ALL TECHNICAL AND QUALITY REQUIREMENTS WERE MET.
Vendedor: NETBID Polska Sp. z o.o.
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 600 mm<br/>description: good condition.  tested an cleaned printed pages 20.000-max. 50.000 toner: 30%-80% password locked technologie: laserprinter type: bw  resolution: 1200 x 1200 dpi functions: print speed: up to 20 pages/minute  ram: 256 mb ram emulationen: pcl 6 (5c, xl)  interfaces: 1 x usb 2.0, 1x rj-45, usb-host , lan duplex: yes WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 600 MM
DESCRIPTION: GOOD CONDITION. TESTED AN CLEANED PRINTED PAGES 20.000-MAX. 50.000 TONER: 30%-80% PASSWORD LOCKED TECHNOLOGIE: LASERPRINTER TYPE: BW RESOLUTION: 1200 X 1200 DPI FUNCTIONS: PRINT SPEED: UP TO 20 PAGES/MINUTE RAM: 256 MB RAM EMULATIONEN: PCL 6 (5C, XL) INTERFACES: 1 X USB 2.0, 1X RJ-45, USB-HOST , LAN DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 250.000 €
Ubicación: Land-    washing and sterilizing line for glass containers used in pharmaceutical industry, consisting of:

    linear washer - hydra 1000 4 i

    the machine ensures the removal of at least 3 log. of particulate contamination (particles such as glass, fibres, oxides, etc.). the machine has been designed and manufactured conforming to cgmp standards.

    technical data

    operating speed: up to 3.600 containers / hour
    size range of the containers:
    min. diam. 50 mm
    max. diam. 80 mm
    max. height 180 mm
    min. mouth diam. 10 mm

    w.f.i. supply pressure: 2,5 - 4 bar (1,5 WASHING AND STERILIZING LINE FOR GLASS CONTAINERS USED IN PHARMACEUTICAL INDUSTRY, CONSISTING OF: LINEAR WASHER - HYDRA 1000 4 I THE MACHINE ENSURES THE REMOVAL OF AT LEAST 3 LOG. OF PARTICULATE CONTAMINATION (PARTICLES SUCH AS GLASS, FIBRES, OXIDES, ETC.). THE MACHINE HAS BEEN DESIGNED AND MANUFACTURED CONFORMING TO CGMP STANDARDS. TECHNICAL DATA OPERATING SPEED: UP TO 3.600 CONTAINERS / HOUR SIZE RANGE OF THE CONTAINERS: MIN. DIAM. 50 MM MAX. DIAM. 80 MM MAX. HEIGHT 180 MM MIN. MOUTH DIAM. 10 MM W.F.I. SUPPLY PRESSURE: 2,5 - 4 BAR (1,5" TRI-CLOVER CLAMP) DEMINERALIZED WATER SUPPLY PRESSURE : 2,5-4 BAR (1,5" TRI-CLOVER CLAMP) COMPRESSED AIR SUPPLY PRESSURE : 6 - 10 BAR (1,5" TRI-CLOVER CLAMP) STANDARD POWER SUPPLY VOLTAGE : 400 VOLTS-50 HZ- 3 PHASE + N + G INSTALLED POWER: 5 KW HEAT LOSS: 4 KW SOUND EMISSION LEVEL: < 80 DB. HEIGHT OF UNLOADING SURFACE: 950 MM.(+/- 25) MM **MACHINE DIMENSIONS: WIDTH 1650 MM LENGTH 3655 MM HEIGHT 2000 MM **MACHINE WEIGHT: 1650 KG ENVIROMENTAL DATA: TEMPERATURE 5-40°C RELATIVE HUMIDITY <70% ALTITUDE < 2000 METERS --------------------------------------------------------------------------------- STERILIZING TUNNEL - BLUE GALAXY 870 FL THE TUNNEL HAS BEEN DESIGNED FOR INSERTION INTO PRODUCTION LINES REQUIRING CONTINUOUS DRY HEAT DEPYROGENATION OF GLASS CONTAINERS. EXPOSED TO A VERTICAL FLOW OF HEATED AIR (MAXIMUM WORKING TEMPERATURE 350°C), THE CONTAINER, AT ITS COLDEST POINT, REACHES TEMPERATURES EQUIVALENT TO 250° C FOR 15 MINUTES (3 LOG. DEPYROGENATION, REF. E.COLI 055-B5, WHERE Z=46,4°C, D-5 MIN., T.REF.=250°C). CLASS 5 AIR ACCORDING TO ISO 14644 IS GUARANTEED FOR THE ENTIRE LENGTH OF THE TUNNEL. TECHNICAL SPECIFICATION STANDARD POWER SUPPLY: 400 VOLT - 50 HZ. - 3 PH + N + G POWER - MAIN (HEATING) 40 KW - COLD CHAMBER 24 KW - UPS (FANS) 10 KW - TOTAL INSTALLED POWER 74 KW AIR TEMPERATURE HEATING ZONE (AT SPEED): MAX. 350°C AIR TEMPERATURE COOLING ZONE (AT SPEED): MAX. 18°C FINAL TEMPERATURE CONTAINERS AT OUTFEED: 25°C COOLING WATER: -TEMPERATURE AT INFEED: 9 - 11°C MAX. -FLOW RATE: 8000 LT/H ASPIRATION AT INFEED ZONE (AT SPEED) 1500 M 3 /H AIR EXPELLED FROM INFEED ZONE (AT SPEED): 1400 M 3 /H TEMP. AIR EXPELLED FROM INFEED ZONE: 30-70°C AIR SUPPLY IN HEATING ZONE (AT SPEED): 200 M3/H RECYCLED AIR FLOW RATE: - HEATING ZONE: 1860 M3/H - COOLING ZONE: 2160 M3/H HEAT LOSS IN THE ENVIRONMENT: APPROX. 10 KW DIMENSIONS AND WEIGHTS - LENGTH: 3050 MM - WIDTH: 2025 MM - HEIGHT: 2980 MM -WEIGHT 3400 KG - USEFUL BELT HEIGHT 950 +/- 25 MM - USEFUL BELT WIDTH 870 MM - USEFUL HOT ZONE LENGTH 904 MM - USEFUL HOT ZONE SURFACE 0,787 M2 - USEFUL COOLING ZONE LENGTH 1044 MM - POWIERZCHNIA U?YTKOWA STREFY CH?ODZENIA 0,910 M2 THE LINES WERE MANUFACTURED AND DELIVERED IN 2015 (NOVEMBER). THE LINES AFTER DELIVERY WERE NEVER USED; THEY ARE PACKED HERMETICALLY AND STORED IN THIS CONDITION. BEFORE THE DELIVERY, THE LINES WERE SUBJECTED TO THE MANUFACTURER'S FAT TESTS (FACTORY ACCEPTANCE TEST), WHICH WAS CONFIRMED BY THE PROTOCOL CONFIRMING THAT ALL TECHNICAL AND QUALITY REQUIREMENTS WERE MET.
Vendedor: NETBID Polska Sp. z o.o.
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 600 mm<br/>description: good condition.  tested an cleaned printed pages 20.000-max. 50.000 toner: 30%-80% password locked technologie: laserprinter type: bw  resolution: 1200 x 1200 dpi functions: print speed: up to 20 pages/minute  ram: 256 mb ram emulationen: pcl 6 (5c, xl)  interfaces: 1 x usb 2.0, 1x rj-45, usb-host , lan duplex: yes WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 600 MM
DESCRIPTION: GOOD CONDITION. TESTED AN CLEANED PRINTED PAGES 20.000-MAX. 50.000 TONER: 30%-80% PASSWORD LOCKED TECHNOLOGIE: LASERPRINTER TYPE: BW RESOLUTION: 1200 X 1200 DPI FUNCTIONS: PRINT SPEED: UP TO 20 PAGES/MINUTE RAM: 256 MB RAM EMULATIONEN: PCL 6 (5C, XL) INTERFACES: 1 X USB 2.0, 1X RJ-45, USB-HOST , LAN DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qt-primos 150 sg-smoothc	
operating hours: 4655 h	
control system:	
mazatrol smoothc	
bar passage: 5 - 65 mm	
diameter: 250 mm	
bar length: 500 - 3200 mm	
speed: 4000 rpm	
motor power: 2.5 kw	
feed rate: 1000 mm / s	
electrical voltage: 400 v / 24 v	
air pressure: 6 bar	
machine weight: 1800 kg	
accessories:	
tool holder	
pump (10 bar)	
feeder magazine: fmb turbo 5-65 / 3200a		    QT-PRIMOS 150 SG-SMOOTHC OPERATING HOURS: 4655 H CONTROL SYSTEM: MAZATROL SMOOTHC BAR PASSAGE: 5 - 65 MM DIAMETER: 250 MM BAR LENGTH: 500 - 3200 MM SPEED: 4000 RPM MOTOR POWER: 2.5 KW FEED RATE: 1000 MM / S ELECTRICAL VOLTAGE: 400 V / 24 V AIR PRESSURE: 6 BAR MACHINE WEIGHT: 1800 KG ACCESSORIES: TOOL HOLDER PUMP (10 BAR) FEEDER MAGAZINE: FMB TURBO 5-65 / 3200A
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 700 x 750 x 900 mm<br/>description: good condition, little scratches tested an cleaned toner: 30-80% printed pages: 9.000-25.000 technologie: multifunction device type: b/w resolution: 1800 x 600dpi, scanresolution 1.200 x 1.200 dpi (color+bw) functions: scan color/sw, copy, fax, print(33 pages/min), network scanning ram: 256mb ports: usb 2.0, rj-45 (lan),rj-11 duplex: yes WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 750 X 900 MM
DESCRIPTION: GOOD CONDITION, LITTLE SCRATCHES TESTED AN CLEANED TONER: 30-80% PRINTED PAGES: 9.000-25.000 TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: B/W RESOLUTION: 1800 X 600DPI, SCANRESOLUTION 1.200 X 1.200 DPI (COLOR+BW) FUNCTIONS: SCAN COLOR/SW, COPY, FAX, PRINT(33 PAGES/MIN), NETWORK SCANNING RAM: 256MB PORTS: USB 2.0, RJ-45 (LAN),RJ-11 DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock number: 502612
manufacturer: battenfeld
type: hm 1300-9200-7700 h-bm university log b4
year of construction: 2005

technical data closing page
clamping force: 13000 kn
holm measure h: 1600 mm
holm level v: 1250 mm
plate size h 2220 mm
size of plate v: 1880 mm
min height: 1000 mm
max height: 1800 mm
plate distance max.: 3850 mm
opening stroke: 2850 mm

screw diameter: 120 mm
displacement: 5655 cc
injection pressure: 1630 bar

the technical data of the 2nd injection unit are as follows: injection unit ii 7700 screw diameter of 100 mm specific injection pressure of 1960 bar computed stroke volume of 3927 cc pinto l/d 22 plasticizing power 122 g / sec

equipment
    german screen text
    cee socket 32a
    core puller hydraulic 1 x
    core puller hydraulic, 2 x
    air valve 1 x
    machine with water battery
    machine without material hopper
    levelling elements
    interface euromap 63
    euromap 67 interface
    interface for airmould
    socket 16a
    two component injection molding machine

dimensions & weight
machine dimensions lxwxh: 15.5 m x 6.6 m x 5.2 m
total weight: 113500kg
  STOCK NUMBER: 502612 MANUFACTURER: BATTENFELD TYPE: HM 1300-9200-7700 H-BM UNIVERSITY LOG B4 YEAR OF CONSTRUCTION: 2005 TECHNICAL DATA CLOSING PAGE CLAMPING FORCE: 13000 KN HOLM MEASURE H: 1600 MM HOLM LEVEL V: 1250 MM PLATE SIZE H 2220 MM SIZE OF PLATE V: 1880 MM MIN HEIGHT: 1000 MM MAX HEIGHT: 1800 MM PLATE DISTANCE MAX.: 3850 MM OPENING STROKE: 2850 MM SCREW DIAMETER: 120 MM DISPLACEMENT: 5655 CC INJECTION PRESSURE: 1630 BAR THE TECHNICAL DATA OF THE 2ND INJECTION UNIT ARE AS FOLLOWS: INJECTION UNIT II 7700 SCREW DIAMETER OF 100 MM SPECIFIC INJECTION PRESSURE OF 1960 BAR COMPUTED STROKE VOLUME OF 3927 CC PINTO L/D 22 PLASTICIZING POWER 122 G / SEC EQUIPMENT GERMAN SCREEN TEXT CEE SOCKET 32A CORE PULLER HYDRAULIC 1 X CORE PULLER HYDRAULIC, 2 X AIR VALVE 1 X MACHINE WITH WATER BATTERY MACHINE WITHOUT MATERIAL HOPPER LEVELLING ELEMENTS INTERFACE EUROMAP 63 EUROMAP 67 INTERFACE INTERFACE FOR AIRMOULD SOCKET 16A TWO COMPONENT INJECTION MOLDING MACHINE DIMENSIONS & WEIGHT MACHINE DIMENSIONS LXWXH: 15.5 M X 6.6 M X 5.2 M TOTAL WEIGHT: 113500KG
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 125 kg<br/>dimensions (l x w x h) approx.: 1200 x 1050 x 1400 mm<br/>description: good condition. unit was always in kyocera service tested an cleaned printed pages 150.000-max. 250.000 toner: 30%-80% special: serviced with new motors, developer latest revision technologie: multifunction device type: color, a4-a3 resolution: 600x600 dpi printed pages:  functions: print, scan, copy, fax speed: up to 40 pages/minute a4, up to 19 pages/minute a3  ram: 2048mb hdd: yes (160gb) interfaces: 10/100basetx, usb 2.0, usb host interface, 2 expansion slots duplex: yes WEIGHT APPROX.: 125 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 1050 X 1400 MM
DESCRIPTION: GOOD CONDITION. UNIT WAS ALWAYS IN KYOCERA SERVICE TESTED AN CLEANED PRINTED PAGES 150.000-MAX. 250.000 TONER: 30%-80% SPECIAL: SERVICED WITH NEW MOTORS, DEVELOPER LATEST REVISION TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: COLOR, A4-A3 RESOLUTION: 600X600 DPI PRINTED PAGES: FUNCTIONS: PRINT, SCAN, COPY, FAX SPEED: UP TO 40 PAGES/MINUTE A4, UP TO 19 PAGES/MINUTE A3 RAM: 2048MB HDD: YES (160GB) INTERFACES: 10/100BASETX, USB 2.0, USB HOST INTERFACE, 2 EXPANSION SLOTS DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-warehouse no.: 	502613
manufacturer: 	battenfeld
typ:	hm 1300-9200 unilog b4
year of construction:	2005

clamping force:	13000	kn
distance between tie bars h:	1600	mm
distance between tie bars v:	1250	mm
size of mould plates h:	2220	mm
size of mould plates v:	1880	mm
min. mould height:	1000	mm
max. mould height:	1800	mm
max. open daylight:	3850	mm
opening stroke:	2850	mm

screw diameter:	120	mm
swept volume:	5655	ccm
injection pressure:	1630	bar

equipment included
    ? screen text german
    ? core pulling hydraulically 1x
    ? core pulling hydraulically 2x
    ? air valve 1x
    ? interface for airmould
    ? interface euromap 63
    ? interface euromap 67
    ? schuko-socket 16a
    ? cee-socket 32a
    ? machine incl. water flow regulator
    ? machine without material hopper
    ? anti vibration mounts 

measures of machine lxbxh:	15.5m x 3.61m x 2.94m
total weight:	99000kg WAREHOUSE NO.: 502613 MANUFACTURER: BATTENFELD TYP: HM 1300-9200 UNILOG B4 YEAR OF CONSTRUCTION: 2005 CLAMPING FORCE: 13000 KN DISTANCE BETWEEN TIE BARS H: 1600 MM DISTANCE BETWEEN TIE BARS V: 1250 MM SIZE OF MOULD PLATES H: 2220 MM SIZE OF MOULD PLATES V: 1880 MM MIN. MOULD HEIGHT: 1000 MM MAX. MOULD HEIGHT: 1800 MM MAX. OPEN DAYLIGHT: 3850 MM OPENING STROKE: 2850 MM SCREW DIAMETER: 120 MM SWEPT VOLUME: 5655 CCM INJECTION PRESSURE: 1630 BAR EQUIPMENT INCLUDED ? SCREEN TEXT GERMAN ? CORE PULLING HYDRAULICALLY 1X ? CORE PULLING HYDRAULICALLY 2X ? AIR VALVE 1X ? INTERFACE FOR AIRMOULD ? INTERFACE EUROMAP 63 ? INTERFACE EUROMAP 67 ? SCHUKO-SOCKET 16A ? CEE-SOCKET 32A ? MACHINE INCL. WATER FLOW REGULATOR ? MACHINE WITHOUT MATERIAL HOPPER ? ANTI VIBRATION MOUNTS MEASURES OF MACHINE LXBXH: 15.5M X 3.61M X 2.94M TOTAL WEIGHT: 99000KG
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 4 kg<br/>dimensions (l x w x h) approx.: 350x150x200 mm<br/>description: 2 pieces angle shifter, 220v ~ 240v, 50hz, n: 400-22000 / min, 1300w, Ø180mm WEIGHT APPROX.: 4 KG
DIMENSIONS (L X W X H) APPROX.: 350X150X200 MM
DESCRIPTION: 2 PIECES ANGLE SHIFTER, 220V ~ 240V, 50HZ, N: 400-22000 / MIN, 1300W, Ø180MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1974, 2 colors, size a2 (45x64 cm), water dampening, witout perfector, powder sprayer, after middle repair, very good condition 1974, 2 COLORS, SIZE A2 (45X64 CM), WATER DAMPENING, WITOUT PERFECTOR, POWDER SPRAYER, AFTER MIDDLE REPAIR, VERY GOOD CONDITION
Vendedor: Hagel s.r.o.
Año de construcción: usado
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 3600 x 2655 x 2980 mm<br/>description: machine no.: 97886 travels: x= 1700 mm y=400 mm z =400 mm distance spindle nose table 200-600 mm max. workpiece weight 500 kg work table number 2 clamping surface 1100 x 420 mm table height over floor: 950 mm speed 10-6000 1/ min tool magazine capacity 20 pcs. tool holder din 69871-a40 control : heidenhain tnc 407 with 20 tool holders, without cabinet, it is not included in the scope of delivery WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 3600 X 2655 X 2980 MM
DESCRIPTION: MACHINE NO.: 97886 TRAVELS: X= 1700 MM Y=400 MM Z =400 MM DISTANCE SPINDLE NOSE TABLE 200-600 MM MAX. WORKPIECE WEIGHT 500 KG WORK TABLE NUMBER 2 CLAMPING SURFACE 1100 X 420 MM TABLE HEIGHT OVER FLOOR: 950 MM SPEED 10-6000 1/ MIN TOOL MAGAZINE CAPACITY 20 PCS. TOOL HOLDER DIN 69871-A40 CONTROL : HEIDENHAIN TNC 407 WITH 20 TOOL HOLDERS, WITHOUT CABINET, IT IS NOT INCLUDED IN THE SCOPE OF DELIVERY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cooling device
manufacturer: burn engineering ag
type: rww 8000 - c25
the device is new with scratches by transport from the manufacturer

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  COOLING DEVICE MANUFACTURER: BURN ENGINEERING AG TYPE: RWW 8000 - C25 THE DEVICE IS NEW WITH SCRATCHES BY TRANSPORT FROM THE MANUFACTURER CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 800 x 1200 x 1700 mm<br/>description: e.g. for hobart dishwashers, glass dishwasher basket 500 x 500 x 100 mm, cutlery basket 500 x 230 x 120 mm, different designs, without transport trolley which can be seen on the photos WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1200 X 1700 MM
DESCRIPTION: E.G. FOR HOBART DISHWASHERS, GLASS DISHWASHER BASKET 500 X 500 X 100 MM, CUTLERY BASKET 500 X 230 X 120 MM, DIFFERENT DESIGNS, WITHOUT TRANSPORT TROLLEY WHICH CAN BE SEEN ON THE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.899 €
Ubicación: Land-(sihi sterling yhib)	

capacity: 30 m 3 /h delivery height: 160 m $46200171 ea p-g201655 bht dimensions mm:
1000 x 545 x 390 dimensions flanges outside mm:
240
180
 (SIHI STERLING YHIB) CAPACITY: 30 M 3 /H DELIVERY HEIGHT: 160 M $46200171 EA P-G201655 BHT DIMENSIONS MM: 1000 X 545 X 390 DIMENSIONS FLANGES OUTSIDE MM: 240 180
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>chamfer lenght:3600 mm<br/>distance between columns:3050 mm<br/>arm length:300 mm<br/>table height:950 mm<br/>daylight opening:655 mm<br/>stroke:315 mm<br/>ajustment speed:125 mm/sec<br/>return speed:69 mm/sec<br/>working feed:10 mm/sec<br/>total power requirement:18,5 kw<br/>weight of the machine ca.:15,0 t<br/>dimensions of the machine ca.:5,0 x 2,1 x 3,2 m<br/><br/> PRESSURE:160 T
CHAMFER LENGHT:3600 MM
DISTANCE BETWEEN COLUMNS:3050 MM
ARM LENGTH:300 MM
TABLE HEIGHT:950 MM
DAYLIGHT OPENING:655 MM
STROKE:315 MM
AJUSTMENT SPEED:125 MM/SEC
RETURN SPEED:69 MM/SEC
WORKING FEED:10 MM/SEC
TOTAL POWER REQUIREMENT:18,5 KW
WEIGHT OF THE MACHINE CA.:15,0 T
DIMENSIONS OF THE MACHINE CA.:5,0 X 2,1 X 3,2 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-mobile schweissraugabsauge station kemper

capacity: 1,200 m â³/u.
number filter: 1 (1090010)
 	 
connection: 380v.
machine lxwxh: 655 x 655 x 1,000 mm MOBILE SCHWEISSRAUGABSAUGE STATION KEMPER CAPACITY: 1,200 M &ACIRC;&SUP3;/U. NUMBER FILTER: 1 (1090010) CONNECTION: 380V. MACHINE LXWXH: 655 X 655 X 1,000 MM
Vendedor: Valk Machines B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 770 €
Ubicación: Land-here an automatic burner car is sold by the manufacturer of messer griesheim, type quicky
with a range of practical options such as double insulation and optional mains voltages of 230 v and 115 v, the quickyâ® offers an increased level of security. the speed controller ergonomically integrated in the handle allows easy use.

simple adjustment possibilities of the burner position both in height and sideways and a cutting torch, clean cuts up to 100 mm structural steel, ensuring optimum results. 

the wide range of options makes the quickyâ® the optimal cutting machine for every application.  the wide range of practical options ensures flexible handling for numerous applications. 

features:
sure: topiary simply by hand double isolated and available with 115 v and 230 v, power supply, led
capacity by default up to 100 mm cutting thickness

condition used.
see pictures

cut thickness longitudinal 3-100 mm (vertical cutting) v-cuts (mitre cuts), automatic and circular cuts for diameter 60-1500 mm. continuously variable drive 100-1100mm / min stepless height and lateral adjustment of the burner. forward / reverse and overrunning clutch. 

for any further questions email or tel. 0160/3655231  
 HERE AN AUTOMATIC BURNER CAR IS SOLD BY THE MANUFACTURER OF MESSER GRIESHEIM, TYPE QUICKY WITH A RANGE OF PRACTICAL OPTIONS SUCH AS DOUBLE INSULATION AND OPTIONAL MAINS VOLTAGES OF 230 V AND 115 V, THE QUICKY&ACIRC;® OFFERS AN INCREASED LEVEL OF SECURITY. THE SPEED CONTROLLER ERGONOMICALLY INTEGRATED IN THE HANDLE ALLOWS EASY USE. SIMPLE ADJUSTMENT POSSIBILITIES OF THE BURNER POSITION BOTH IN HEIGHT AND SIDEWAYS AND A CUTTING TORCH, CLEAN CUTS UP TO 100 MM STRUCTURAL STEEL, ENSURING OPTIMUM RESULTS. THE WIDE RANGE OF OPTIONS MAKES THE QUICKY&ACIRC;® THE OPTIMAL CUTTING MACHINE FOR EVERY APPLICATION. THE WIDE RANGE OF PRACTICAL OPTIONS ENSURES FLEXIBLE HANDLING FOR NUMEROUS APPLICATIONS. FEATURES: SURE: TOPIARY SIMPLY BY HAND DOUBLE ISOLATED AND AVAILABLE WITH 115 V AND 230 V, POWER SUPPLY, LED CAPACITY BY DEFAULT UP TO 100 MM CUTTING THICKNESS CONDITION USED. SEE PICTURES CUT THICKNESS LONGITUDINAL 3-100 MM (VERTICAL CUTTING) V-CUTS (MITRE CUTS), AUTOMATIC AND CIRCULAR CUTS FOR DIAMETER 60-1500 MM. CONTINUOUSLY VARIABLE DRIVE 100-1100MM / MIN STEPLESS HEIGHT AND LATERAL ADJUSTMENT OF THE BURNER. FORWARD / REVERSE AND OVERRUNNING CLUTCH. FOR ANY FURTHER QUESTIONS EMAIL OR TEL. 0160/3655231
Vendedor: Herr Karl-Heinz Menzinger
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 1540 kg<br/>dimensions (l x w x h) approx.: 2200 x 1600 x 2700 mm<br/>description: - table dimensions: 595 x 320 mm<br> - max table load: 200 kg<br> - travels (x,y,z): 400 x 250 x 500 mm<br> - distance between spindle/table: 655 mm<br> - grinding spindle travel: 110 mm<br> - motorized rotation spindle speed: 0 ? 80000 rpm<br> - velocidad de rotación con turbina: 225000 rpm<br> - power: 6.6 kw<br> - 1 motor: 5000 ? 40000 rpm<br> - 1 hauser b90 motor b90<br> - oil mist tank WEIGHT APPROX.: 1540 KG
DIMENSIONS (L X W X H) APPROX.: 2200 X 1600 X 2700 MM
DESCRIPTION: - TABLE DIMENSIONS: 595 X 320 MM
- MAX TABLE LOAD: 200 KG
- TRAVELS (X,Y,Z): 400 X 250 X 500 MM
- DISTANCE BETWEEN SPINDLE/TABLE: 655 MM
- GRINDING SPINDLE TRAVEL: 110 MM
- MOTORIZED ROTATION SPINDLE SPEED: 0 ? 80000 RPM
- VELOCIDAD DE ROTACIóN CON TURBINA: 225000 RPM
- POWER: 6.6 KW
- 1 MOTOR: 5000 ? 40000 RPM
- 1 HAUSER B90 MOTOR B90
- OIL MIST TANK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-* capacity: 240 tons per day * CAPACITY: 240 TONS PER DAY
Vendedor: MAT DE SURONE
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 950 x 900 x 1250 mm<br/>description: ? thickness planer, thicknesser<br> ? working width 400 mm<br> ? maximum workpiece thickness approx. 220 mm<br> ? table dimensions 850 x 400 mm WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 950 X 900 X 1250 MM
DESCRIPTION: ? THICKNESS PLANER, THICKNESSER
? WORKING WIDTH 400 MM
? MAXIMUM WORKPIECE THICKNESS APPROX. 220 MM
? TABLE DIMENSIONS 850 X 400 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 30 €
Ubicación: Land-duckworth & kent 8.655, 0, 8 x 0, 35 irrigation- aspiration handpiece, price per piece

sales commercial/dealer to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 
DUCKWORTH & KENT 8.655, 0, 8 X 0, 35 IRRIGATION- ASPIRATION HANDPIECE, PRICE PER PIECE SALES COMMERCIAL/DEALER TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-used concrete block making machine fabr. hess type rh 2000-2 without intent built in 2004, maximum product height 500 mm, double silo outlet, rocker arm forms clamp, stone elevation attacks, with hydraulic pulling sheet balance, valve, hydraulic station, board feed with more powerful engine and pulling sheet metal intake, control siemens s 7 visualization pc with win - cc, control panel wet page.

price on request.
jimoh - measuring and control engineering fountain 22 65510 idstein
tel. 0049 171 6232061 USED CONCRETE BLOCK MAKING MACHINE FABR. HESS TYPE RH 2000-2 WITHOUT INTENT BUILT IN 2004, MAXIMUM PRODUCT HEIGHT 500 MM, DOUBLE SILO OUTLET, ROCKER ARM FORMS CLAMP, STONE ELEVATION ATTACKS, WITH HYDRAULIC PULLING SHEET BALANCE, VALVE, HYDRAULIC STATION, BOARD FEED WITH MORE POWERFUL ENGINE AND PULLING SHEET METAL INTAKE, CONTROL SIEMENS S 7 VISUALIZATION PC WITH WIN - CC, CONTROL PANEL WET PAGE. PRICE ON REQUEST. JIMOH - MEASURING AND CONTROL ENGINEERING FOUNTAIN 22 65510 IDSTEIN TEL. 0049 171 6232061
Vendedor: Lonz - Mess und Regeltechnik
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 75 kg<br/>dimensions (l x w x h) approx.: 700 x500 x700 mm<br/>description: blade: 250 mm, manual. WEIGHT APPROX.: 75 KG
DIMENSIONS (L X W X H) APPROX.: 700 X500 X700 MM
DESCRIPTION: BLADE: 250 MM, MANUAL.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-x-off 14,000 mm, y-off 1500 mm, z away 3,000 mm, max. 5000 rpm. iso 50 recording, work feeds 5000 mm / min, rapid feed 25,000 mm / min
cnc heidenhain itnc 530, program run 9655 hours control, in very good condition   X-OFF 14,000 MM, Y-OFF 1500 MM, Z AWAY 3,000 MM, MAX. 5000 RPM. ISO 50 RECORDING, WORK FEEDS 5000 MM / MIN, RAPID FEED 25,000 MM / MIN CNC HEIDENHAIN ITNC 530, PROGRAM RUN 9655 HOURS CONTROL, IN VERY GOOD CONDITION
Vendedor: INTERMACH BV
Año de construcción: usado
Precio: used machinery auction RESALE 1.400 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 3500 x 2400 x 2600 mm<br/>description: travels:<br> x- axis 320 mm<br> y- axis 200 mm<br> z- axis 200 mm<br> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2400 X 2600 MM
DESCRIPTION: TRAVELS:
X- AXIS 320 MM
Y- AXIS 200 MM
Z- AXIS 200 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-compressor kaeser type asd 37 sigma with refrigerant dryer type td 76 and ã?labschider drukosep type 8, year: 2013

screw compressor kaeser type asd 37 sigma serial number 3269
hours of operation 4831 h
rated power 22 kw
2945 1/min engine speed
maximum operating pressure 8 bar
sigma control control 2
dimensions lxwxh approx. 1350 x 920 x 1505 mm
weight 655 kg
	
screw compressor kaeser type asd 37 sigma serial no. 3270
hours of operation 4975 h
rated power 22 kw
2945 1/min engine speed
maximum operating pressure 8 bar
sigma control control 2
dimensions lxwxh approx. 1350 x 920 x 1505 mm
weight 655 kg
	
refrigerant dryers kaeser type td 76
item no. 	1.810.2
serial no. 3564
refrigerant r 134 a
refrigeration medium level of 1.50 kgs
cooling system operating pressure 18 bar
max working pressure air system 16 bar dimensions lxwxh approx. 760 x 1125 x 1180 mm
weight 270 kg
	
oil separator drukosep type 8 location d 90619 trautskirchen  
 COMPRESSOR KAESER TYPE ASD 37 SIGMA WITH REFRIGERANT DRYER TYPE TD 76 AND &ATILDE;?LABSCHIDER DRUKOSEP TYPE 8, YEAR: 2013 SCREW COMPRESSOR KAESER TYPE ASD 37 SIGMA SERIAL NUMBER 3269 HOURS OF OPERATION 4831 H RATED POWER 22 KW 2945 1/MIN ENGINE SPEED MAXIMUM OPERATING PRESSURE 8 BAR SIGMA CONTROL CONTROL 2 DIMENSIONS LXWXH APPROX. 1350 X 920 X 1505 MM WEIGHT 655 KG SCREW COMPRESSOR KAESER TYPE ASD 37 SIGMA SERIAL NO. 3270 HOURS OF OPERATION 4975 H RATED POWER 22 KW 2945 1/MIN ENGINE SPEED MAXIMUM OPERATING PRESSURE 8 BAR SIGMA CONTROL CONTROL 2 DIMENSIONS LXWXH APPROX. 1350 X 920 X 1505 MM WEIGHT 655 KG REFRIGERANT DRYERS KAESER TYPE TD 76 ITEM NO. 1.810.2 SERIAL NO. 3564 REFRIGERANT R 134 A REFRIGERATION MEDIUM LEVEL OF 1.50 KGS COOLING SYSTEM OPERATING PRESSURE 18 BAR MAX WORKING PRESSURE AIR SYSTEM 16 BAR DIMENSIONS LXWXH APPROX. 760 X 1125 X 1180 MM WEIGHT 270 KG OIL SEPARATOR DRUKOSEP TYPE 8 LOCATION D 90619 TRAUTSKIRCHEN
Vendedor: GROMAR Mariola Groyecki
Año de construcción: usado
Ubicación: Land-:kth 400 <br/>turning diameter:805 mm<br/>turning length:1000/2000/3000/4000/5000 mm<br/>control:siemens/fanuc/fagor <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 (opt. a2-11) <br/>spindle speeds:0-1700 1/min.<br/>spindle bore:105 (opt. 155/230) mm<br/>transmission ratio:2 <br/>feed range:0-7000 mm/min<br/>rapid traverse x/z:10/10 m/min<br/>tailstock quill diameter:106 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>power requirement:17 kw<br/>weight of the machine ca.:5460/5760/6460/7560/9060  kg<br/>dimensions of the machine ca.:3557/4557/5557/6557/7557 x1800 x 2230 mm<br/>automatic tool changer:8-fach <br/>cnc controller:siemens 828d <br/>ce-design: <br/>servo spindle motor: <br/>hydraulic unit: <br/>machine work light: <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>machine semi-cover: <br/>: <br/>tools:1 satz <br/>c-axis: <br/>y-axis: <br/>different chucks and faceplates: <br/>chip conveyor and trolley: <br/>hydr. tailstock quill: <br/>hydr. chuck: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests: <br/><br/>new cnc lathe kraft st 500/3000 with fanuc oi td  made in europe  for more information please see the attached documents :KTH 400
TURNING DIAMETER:805 MM
TURNING LENGTH:1000/2000/3000/4000/5000 MM
CONTROL:SIEMENS/FANUC/FAGOR
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8 (OPT. A2-11)
SPINDLE SPEEDS:0-1700 1/MIN.
SPINDLE BORE:105 (OPT. 155/230) MM
TRANSMISSION RATIO:2
FEED RANGE:0-7000 MM/MIN
RAPID TRAVERSE X/Z:10/10 M/MIN
TAILSTOCK QUILL DIAMETER:106 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:5460/5760/6460/7560/9060 KG
DIMENSIONS OF THE MACHINE CA.:3557/4557/5557/6557/7557 X1800 X 2230 MM
AUTOMATIC TOOL CHANGER:8-FACH
CNC CONTROLLER:SIEMENS 828D
CE-DESIGN:
SERVO SPINDLE MOTOR:
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
MACHINE SEMI-COVER:
:
TOOLS:1 SATZ
C-AXIS:
Y-AXIS:
DIFFERENT CHUCKS AND FACEPLATES:
CHIP CONVEYOR AND TROLLEY:
HYDR. TAILSTOCK QUILL:
HYDR. CHUCK:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:

NEW CNC LATHE KRAFT ST 500/3000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-ice machine brema muster 350 a-q
overhauled
• overall dimensions 965x655x880 mm;
• capacity up to 350 kg/24 h;
• power 2.1 kw;
• power supply 230 v;
• weight 137 kg;
• ice storage hopper 350 kg;
• overall dimensions 1250x790x1000 mm;
• weight 105 kg. ICE MACHINE BREMA MUSTER 350 A-Q OVERHAULED • OVERALL DIMENSIONS 965X655X880 MM; • CAPACITY UP TO 350 KG/24 H; • POWER 2.1 KW; • POWER SUPPLY 230 V; • WEIGHT 137 KG; • ICE STORAGE HOPPER 350 KG; • OVERALL DIMENSIONS 1250X790X1000 MM; • WEIGHT 105 KG.
Vendedor: Mazuba GmbH
Año de construcción: usado
Ubicación: Land-:ll-1250 | ll-1450 | ll-1650 <br/>turning diameter:1250 | 1450 | 1650 mm<br/>turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:705|805|905 mm<br/>width of cross cariage:600 mm<br/>bed width:1370 mm<br/>spindle bore:200 mm<br/>spindle nose:a2-15/a2-15/a2-20/a2-28 <br/>spindle speed:4-400  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:40 mm<br/>tailstock quill diameter:300 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:7 mk<br/>tailstock movement:über motor (zahnstangenantrieb) <br/>travel -x axis:755 mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:4 kw<br/>servo motor z-axis:7 kw<br/>rapid power traverse in x-and z direction:5 m/min<br/>hydraulic motor:1,4 (ab 9m: 3,6) kw<br/>coolant pump drive:15 bar<br/>weight of the machine ca.:auf anfrage <br/>machine length:15150/16150/17150/18150/19150/20150 mm<br/>machine width/height:auf anfrage <br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:4-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>:2 türen vorne und hinten durchgehende wand <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL-1250 | LL-1450 | LL-1650
TURNING DIAMETER:1250 | 1450 | 1650 MM
TURNING LENGTH:5000/6000/7000/8000/9000/12000/14000/16000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:705|805|905 MM
WIDTH OF CROSS CARIAGE:600 MM
BED WIDTH:1370 MM
SPINDLE BORE:200 MM
SPINDLE NOSE:A2-15/A2-15/A2-20/A2-28
SPINDLE SPEED:4-400 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:40 MM
TAILSTOCK QUILL DIAMETER:300 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:7 MK
TAILSTOCK MOVEMENT:üBER MOTOR (ZAHNSTANGENANTRIEB)
TRAVEL -X AXIS:755 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:4 KW
SERVO MOTOR Z-AXIS:7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5 M/MIN
HYDRAULIC MOTOR:1,4 (AB 9M: 3,6) KW
COOLANT PUMP DRIVE:15 BAR
WEIGHT OF THE MACHINE CA.:AUF ANFRAGE
MACHINE LENGTH:15150/16150/17150/18150/19150/20150 MM
MACHINE WIDTH/HEIGHT:AUF ANFRAGE
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:4-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:2 TüREN VORNE UND HINTEN DURCHGEHENDE WAND
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. DOUBLE CHUCK IS AVAILABLE. MILLING AND BORING FUNCTION IS OPTIONAL, ALSO SIMOULTANOUSLY. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-used concrete block making machine fabr. henke / masa with core and intent, year 1992 / 93 board size 1400 x 1050 mm stroke head countersunk head fahrzeugruppe dry shelf packaging strapping.
approx. 2500 unterlagsbretter
about 30 forms
mixing plant fabr. teka 2 mixer core and attachment

price and more info on request.
tel. 0171 6232061
jimoh - measuring and control technology
fountain street 22
65510 idstein USED CONCRETE BLOCK MAKING MACHINE FABR. HENKE / MASA WITH CORE AND INTENT, YEAR 1992 / 93 BOARD SIZE 1400 X 1050 MM STROKE HEAD COUNTERSUNK HEAD FAHRZEUGRUPPE DRY SHELF PACKAGING STRAPPING. APPROX. 2500 UNTERLAGSBRETTER ABOUT 30 FORMS MIXING PLANT FABR. TEKA 2 MIXER CORE AND ATTACHMENT PRICE AND MORE INFO ON REQUEST. TEL. 0171 6232061 JIMOH - MEASURING AND CONTROL TECHNOLOGY FOUNTAIN STREET 22 65510 IDSTEIN
Vendedor: Lonz - Mess und Regeltechnik
Año de construcción: usado
Ubicación: Land-<strong>state: machine still working by customer in good condition with 25000 working hours</strong>

chuck type:
electrode changer:
x-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
cnc type:
worktank length:
worktank width:
worktank height:
table length:
table width:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight (kg):
max. machining current (a):
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> STATE: MACHINE STILL WORKING BY CUSTOMER IN GOOD CONDITION WITH 25000 WORKING HOURS CHUCK TYPE: ELECTRODE CHANGER: X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): CNC TYPE: WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: TABLE LENGTH: TABLE WIDTH: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT (KG): MAX. MACHINING CURRENT (A): LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-used concrete block making machine fabr. henke / masa with core and attachment board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping chambers in a diverse formen.mischanlage is complex, zementsilosdie now can a ready state, but also to the present site be continued. for more information, 0171 6232061 or via maillonz - measuring and regeltechnikbrunnenstrasse 22 65510 idstein  USED CONCRETE BLOCK MAKING MACHINE FABR. HENKE / MASA WITH CORE AND ATTACHMENT BOARD SIZE 1400 X 1050 MM STROKE HEAD COUNTERSUNK HEAD VEHICLE GROUP PACKAGING STRAPPING CHAMBERS IN A DIVERSE FORMEN.MISCHANLAGE IS COMPLEX, ZEMENTSILOSDIE NOW CAN A READY STATE, BUT ALSO TO THE PRESENT SITE BE CONTINUED. FOR MORE INFORMATION, 0171 6232061 OR VIA MAILLONZ - MEASURING AND REGELTECHNIKBRUNNENSTRASSE 22 65510 IDSTEIN
Vendedor: Lonz - Mess und Regeltechnik
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 240 kg<br/>dimensions (l x w x h) approx.: 800 x 1400 x 2400 mm<br/>description: length of tape 51 mts. WEIGHT APPROX.: 240 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1400 X 2400 MM
DESCRIPTION: LENGTH OF TAPE 51 MTS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used concrete block making machine fabr. henke / masa with core and attachment board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping chambers in a diverse formen.mischanlage is complex, zementsilosdie now can a ready state, but also to the present site be continued. for more information, 0171 6232061 or via maillonz - measuring and regeltechnikbrunnenstrasse 22 65510 idstein  USED CONCRETE BLOCK MAKING MACHINE FABR. HENKE / MASA WITH CORE AND ATTACHMENT BOARD SIZE 1400 X 1050 MM STROKE HEAD COUNTERSUNK HEAD VEHICLE GROUP PACKAGING STRAPPING CHAMBERS IN A DIVERSE FORMEN.MISCHANLAGE IS COMPLEX, ZEMENTSILOSDIE NOW CAN A READY STATE, BUT ALSO TO THE PRESENT SITE BE CONTINUED. FOR MORE INFORMATION, 0171 6232061 OR VIA MAILLONZ - MEASURING AND REGELTECHNIKBRUNNENSTRASSE 22 65510 IDSTEIN
Vendedor: Lonz - Mess und Regeltechnik
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BAADER types: