10 ofertas

Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-turn-key brewing equipment
10 hl brewhouse, 3 vessels, mash-lauter tun, cooking pan, whirlpool, dampfbeheizt, fitted v2a, on base frame and fully piped & wired, siemens control, semi automatic, we can play a fully automatic system against extra charge, plug and play, you can put the brewhouse, connect and ready to go, dimensions: length 5, 9 m, width 2, 4 m, height approx. 1 m 3.0 plus fireplace
 TURN-KEY BREWING EQUIPMENT 10 HL BREWHOUSE, 3 VESSELS, MASH-LAUTER TUN, COOKING PAN, WHIRLPOOL, DAMPFBEHEIZT, FITTED V2A, ON BASE FRAME AND FULLY PIPED & WIRED, SIEMENS CONTROL, SEMI AUTOMATIC, WE CAN PLAY A FULLY AUTOMATIC SYSTEM AGAINST EXTRA CHARGE, PLUG AND PLAY, YOU CAN PUT THE BREWHOUSE, CONNECT AND READY TO GO, DIMENSIONS: LENGTH 5, 9 M, WIDTH 2, 4 M, HEIGHT APPROX. 1 M 3.0 PLUS FIREPLACE
Vendedor: Brauerei Support Erwin Meyer
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; mileage [km]: 471953; gross weight [kg]: 26000; transmission: mechanisch; front tyre size: ; rear tyre size: ; colour: gelb; wheelbase: 3900; cargo space dimensions [lxbxh]: xx; max payload [kg]: 15575; cabin: schlafkabine ; MILEAGE [KM]: 471953; GROSS WEIGHT [KG]: 26000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: GELB; WHEELBASE: 3900; CARGO SPACE DIMENSIONS [LXBXH]: XX; MAX PAYLOAD [KG]: 15575; CABIN: SCHLAFKABINE
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-turnkey breweries, consulting, cad planning, cost per hl of beer recipe, raw materials, sample brews

turn-key brewing equipment
10 hl brewhouse, 3 vessels, mash-lauter tun, cooking pan, whirlpool, dampfbeheizt, fitted v2a, on base frame and fully piped & wired, siemens control, semi automatic, we can play a fully automatic system against extra charge, plug and play, you can put the brewhouse, connect and ready to go, dimensions: length 5, 9 m, width 2, 4 m, height approx. 1 m 3.0 plus fireplace
 TURNKEY BREWERIES, CONSULTING, CAD PLANNING, COST PER HL OF BEER RECIPE, RAW MATERIALS, SAMPLE BREWS TURN-KEY BREWING EQUIPMENT 10 HL BREWHOUSE, 3 VESSELS, MASH-LAUTER TUN, COOKING PAN, WHIRLPOOL, DAMPFBEHEIZT, FITTED V2A, ON BASE FRAME AND FULLY PIPED & WIRED, SIEMENS CONTROL, SEMI AUTOMATIC, WE CAN PLAY A FULLY AUTOMATIC SYSTEM AGAINST EXTRA CHARGE, PLUG AND PLAY, YOU CAN PUT THE BREWHOUSE, CONNECT AND READY TO GO, DIMENSIONS: LENGTH 5, 9 M, WIDTH 2, 4 M, HEIGHT APPROX. 1 M 3.0 PLUS FIREPLACE
Vendedor: Brauerei Support Erwin Meyer
Año de construcción: usado
Precio: 38.900 €
Ubicación: Land-; mileage [km]: 366400; gross weight [kg]: 33000; transmission: mechanisch; front tyre size: 13r22.5; rear tyre size: 13r22.5; colour: gelb; wheelbase: 3600; cargo space dimensions [lxbxh]: xx; max payload [kg]: 22540 ; MILEAGE [KM]: 366400; GROSS WEIGHT [KG]: 33000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22.5; REAR TYRE SIZE: 13R22.5; COLOUR: GELB; WHEELBASE: 3600; CARGO SPACE DIMENSIONS [LXBXH]: XX; MAX PAYLOAD [KG]: 22540
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones-khs 55 0000 bph with bwm
 
this line is designed for new and returnable 0.33 and 0.5 liter glass bottles and it can handle up to 55 000 bph. the line was originally built in year 1998 but it has been heavily upgraded from 2002 to 2008. the line has two years ago refurbished khs bottle washer. original equipment has siemens simatic s5 plc but 2002 and onwards machines have simatic s7 plcs. secondary packaging of this line includes a tray shrink wrapper, palletizer and pallet shrink wrapper. the production stopped in 2016. all equipment is in good condition, the line is installed and ready for delivery.
 
the list of main equipment of the line:
 
• khs innopal depalletizer with empty pallet magazine, 2002, control kuka
• bottle conveyors, siemens s5
• bottle washer khs innoclean ee 52/87, up to 50.800 bph, single-end, 2002
• conveyor of empty bottles
• empty bottle inspector heuft spectrum hbbsx b72, four pushers, control heuft, 2008
• filling block khs innofill dr 132/24, crown/twist-off/ring-pull caps, siemens s5, 1998
• level inspector heuft spectrum hbbvxt i60, cap & level inspection, 2007
• conveyor for full bottles
• pasteurizer khs/apv, buffer tank kronjysk 130 hl, siemens s7, 1998
• labeler krones multimodul, three labels, paper & film, cold glue, servos, siemens s7, 2006
• label inspector krones fm-x, 2006
• shrink film packer khs kisters tsp 060b, 60 tact/min, tray+film, siemens s7, 2004
• palletizer krones/kettner, two pallets in parallel, pallet magazine, siemens s5, 2002
• conveyors of boxes, siemens s5
• pallet wrapper franpack, elevator table, siemens s 5, 1998
• main electrical distribution cabinets  GLASS BOTTLE FILLING LINE KRONES-KHS 55 0000 BPH WITH BWM THIS LINE IS DESIGNED FOR NEW AND RETURNABLE 0.33 AND 0.5 LITER GLASS BOTTLES AND IT CAN HANDLE UP TO 55 000 BPH. THE LINE WAS ORIGINALLY BUILT IN YEAR 1998 BUT IT HAS BEEN HEAVILY UPGRADED FROM 2002 TO 2008. THE LINE HAS TWO YEARS AGO REFURBISHED KHS BOTTLE WASHER. ORIGINAL EQUIPMENT HAS SIEMENS SIMATIC S5 PLC BUT 2002 AND ONWARDS MACHINES HAVE SIMATIC S7 PLCS. SECONDARY PACKAGING OF THIS LINE INCLUDES A TRAY SHRINK WRAPPER, PALLETIZER AND PALLET SHRINK WRAPPER. THE PRODUCTION STOPPED IN 2016. ALL EQUIPMENT IS IN GOOD CONDITION, THE LINE IS INSTALLED AND READY FOR DELIVERY. THE LIST OF MAIN EQUIPMENT OF THE LINE: • KHS INNOPAL DEPALLETIZER WITH EMPTY PALLET MAGAZINE, 2002, CONTROL KUKA • BOTTLE CONVEYORS, SIEMENS S5 • BOTTLE WASHER KHS INNOCLEAN EE 52/87, UP TO 50.800 BPH, SINGLE-END, 2002 • CONVEYOR OF EMPTY BOTTLES • EMPTY BOTTLE INSPECTOR HEUFT SPECTRUM HBBSX B72, FOUR PUSHERS, CONTROL HEUFT, 2008 • FILLING BLOCK KHS INNOFILL DR 132/24, CROWN/TWIST-OFF/RING-PULL CAPS, SIEMENS S5, 1998 • LEVEL INSPECTOR HEUFT SPECTRUM HBBVXT I60, CAP & LEVEL INSPECTION, 2007 • CONVEYOR FOR FULL BOTTLES • PASTEURIZER KHS/APV, BUFFER TANK KRONJYSK 130 HL, SIEMENS S7, 1998 • LABELER KRONES MULTIMODUL, THREE LABELS, PAPER & FILM, COLD GLUE, SERVOS, SIEMENS S7, 2006 • LABEL INSPECTOR KRONES FM-X, 2006 • SHRINK FILM PACKER KHS KISTERS TSP 060B, 60 TACT/MIN, TRAY+FILM, SIEMENS S7, 2004 • PALLETIZER KRONES/KETTNER, TWO PALLETS IN PARALLEL, PALLET MAGAZINE, SIEMENS S5, 2002 • CONVEYORS OF BOXES, SIEMENS S5 • PALLET WRAPPER FRANPACK, ELEVATOR TABLE, SIEMENS S 5, 1998 • MAIN ELECTRICAL DISTRIBUTION CABINETS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-motor output: - kw<br/>wheel diameter: - mm<br/>wheel width: - mm<br/>length of log carriage:  mm<br/>number of clamps:  st.<br/>log diameter max.:  mm<br/>feed speed:  m/min.<br/>overall size:  mm<br/>weight:  kg<br/>control:  <br/>automatic sawing machine for plates, type pla-800-000<br/>max. 6000 x 2000 x 160 mm<br/>max. sawing length 8500 mm<br/>table load max. 24 tons<br/><br/>the machine is already dismantled.<br/><br/><br/><br/><br/><br/> MOTOR OUTPUT: - KW
WHEEL DIAMETER: - MM
WHEEL WIDTH: - MM
LENGTH OF LOG CARRIAGE: MM
NUMBER OF CLAMPS: ST.
LOG DIAMETER MAX.: MM
FEED SPEED: M/MIN.
OVERALL SIZE: MM
WEIGHT: KG
CONTROL:
AUTOMATIC SAWING MACHINE FOR PLATES, TYPE PLA-800-000
MAX. 6000 X 2000 X 160 MM
MAX. SAWING LENGTH 8500 MM
TABLE LOAD MAX. 24 TONS

THE MACHINE IS ALREADY DISMANTLED.





Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-log band saws canali type pacific bbsv 1600, including sharpening machine, complete mechanization and car braun canali type hydromatic, roll diameter: 1,600 mm.
 LOG BAND SAWS CANALI TYPE PACIFIC BBSV 1600, INCLUDING SHARPENING MACHINE, COMPLETE MECHANIZATION AND CAR BRAUN CANALI TYPE HYDROMATIC, ROLL DIAMETER: 1,600 MM.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-make: alphacnc
model: benchtop wood routing cnc machine series bt-6012
condition: used
machine type: other 
location of machine: uk

machine details
the power of cnc on your bench
now you can bring the power and capabilities of an industrial cnc router to your desk. the benchtop series is the first desktop model with the rigid build of an industrial cnc machine. designed with industrial ball screws on every axis and equipped with 20mm linear rail, you get better motion and more control than any other machine in this price or size range.


the benchtop series revolutionizes the desktop market with a high-quality construction that has not previously been available in a machine of this size. the benchtop series is perfect for educational settings, hobbyist shops, and startup companies where a large machine simply is not possible or necessary. complete with manufacturer lifetime tech support, this machine is perfect for every user from a novice to the most experienced cnc user.


contact us today to find out how you can get everything you need from a cnc router that fits right on your desk.

specs:
working area 600*1200*150mm.

2.2kw water coolant spindle.

yako stepper driver.

86 series stepper motor.

dsp a11 controller.

20mm linear rail.

all axes ballscrew transmission.

auto tool zero sensor.

cast iron structure.

materials cut.
benchtop series cnc can accurately cut virtually any hard material including:

wood
acrylic
plastic
foam
aluminum
brass
and more
software.
so, what software is involved in cnc? there are primarily three parts:

your cad (computer aided design) software is where you design your parts to be routed, lathed, milled, or cut.
cam (computer aided manufacturing) software converts your cad drawings into g-code, which is the programming language that the cnc control software understands.
the cnc control software (which is the controller of the machine)then reads the g-code and turns it into motion to drive your machine.
software we recommend (cad/cam all in one)

vectric aspire
autodesk fusion 360
mozaik. specialized in cabinet & furniture
cad software

google sketchup
blender
caligari truespace
wings 3d
moi3d
corel cad
artcam
solidworks
rhinocad
solidedge
autocad
turbocad
alibre
cam software

heeks cad/cam
g-simple
freemill
dolphin cad/cam
cambam
vizion (artcam)
onecnc
virtualgibbs
mastercam
bobcad-cam
ram
meshcam
visualmill
turbocadcam
deskcnc
sheetcam
onecnc
sprutcam
edgecam
artcam MAKE: ALPHACNC MODEL: BENCHTOP WOOD ROUTING CNC MACHINE SERIES BT-6012 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: UK MACHINE DETAILS THE POWER OF CNC ON YOUR BENCH NOW YOU CAN BRING THE POWER AND CAPABILITIES OF AN INDUSTRIAL CNC ROUTER TO YOUR DESK. THE BENCHTOP SERIES IS THE FIRST DESKTOP MODEL WITH THE RIGID BUILD OF AN INDUSTRIAL CNC MACHINE. DESIGNED WITH INDUSTRIAL BALL SCREWS ON EVERY AXIS AND EQUIPPED WITH 20MM LINEAR RAIL, YOU GET BETTER MOTION AND MORE CONTROL THAN ANY OTHER MACHINE IN THIS PRICE OR SIZE RANGE. THE BENCHTOP SERIES REVOLUTIONIZES THE DESKTOP MARKET WITH A HIGH-QUALITY CONSTRUCTION THAT HAS NOT PREVIOUSLY BEEN AVAILABLE IN A MACHINE OF THIS SIZE. THE BENCHTOP SERIES IS PERFECT FOR EDUCATIONAL SETTINGS, HOBBYIST SHOPS, AND STARTUP COMPANIES WHERE A LARGE MACHINE SIMPLY IS NOT POSSIBLE OR NECESSARY. COMPLETE WITH MANUFACTURER LIFETIME TECH SUPPORT, THIS MACHINE IS PERFECT FOR EVERY USER FROM A NOVICE TO THE MOST EXPERIENCED CNC USER. CONTACT US TODAY TO FIND OUT HOW YOU CAN GET EVERYTHING YOU NEED FROM A CNC ROUTER THAT FITS RIGHT ON YOUR DESK. SPECS: WORKING AREA 600*1200*150MM. 2.2KW WATER COOLANT SPINDLE. YAKO STEPPER DRIVER. 86 SERIES STEPPER MOTOR. DSP A11 CONTROLLER. 20MM LINEAR RAIL. ALL AXES BALLSCREW TRANSMISSION. AUTO TOOL ZERO SENSOR. CAST IRON STRUCTURE. MATERIALS CUT. BENCHTOP SERIES CNC CAN ACCURATELY CUT VIRTUALLY ANY HARD MATERIAL INCLUDING: WOOD ACRYLIC PLASTIC FOAM ALUMINUM BRASS AND MORE SOFTWARE. SO, WHAT SOFTWARE IS INVOLVED IN CNC? THERE ARE PRIMARILY THREE PARTS: YOUR CAD (COMPUTER AIDED DESIGN) SOFTWARE IS WHERE YOU DESIGN YOUR PARTS TO BE ROUTED, LATHED, MILLED, OR CUT. CAM (COMPUTER AIDED MANUFACTURING) SOFTWARE CONVERTS YOUR CAD DRAWINGS INTO G-CODE, WHICH IS THE PROGRAMMING LANGUAGE THAT THE CNC CONTROL SOFTWARE UNDERSTANDS. THE CNC CONTROL SOFTWARE (WHICH IS THE CONTROLLER OF THE MACHINE)THEN READS THE G-CODE AND TURNS IT INTO MOTION TO DRIVE YOUR MACHINE. SOFTWARE WE RECOMMEND (CAD/CAM ALL IN ONE) VECTRIC ASPIRE AUTODESK FUSION 360 MOZAIK. SPECIALIZED IN CABINET & FURNITURE CAD SOFTWARE GOOGLE SKETCHUP BLENDER CALIGARI TRUESPACE WINGS 3D MOI3D COREL CAD ARTCAM SOLIDWORKS RHINOCAD SOLIDEDGE AUTOCAD TURBOCAD ALIBRE CAM SOFTWARE HEEKS CAD/CAM G-SIMPLE FREEMILL DOLPHIN CAD/CAM CAMBAM VIZION (ARTCAM) ONECNC VIRTUALGIBBS MASTERCAM BOBCAD-CAM RAM MESHCAM VISUALMILL TURBOCADCAM DESKCNC SHEETCAM ONECNC SPRUTCAM EDGECAM ARTCAM
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-we offer for sale:

a used drive-in rack system
from stock conversion

maxrac ec
topp, as new bj. 2010
ex works warehouse 21698 harsefeld
 
532 pitches more or reduced quantities possible.
total: approx. 4,000 parking spaces available
installation available, please enquire.

please compare our offer!
bbsinrv2ee

our shelves are certified according to iso 9001:2000
this means: constant quality control!
meet maxrac shelves
the european standard fem
din en 15635
bgr 234 of the bgs
the australian as4084-2012 standard
and withstand the tã?v tests.
this offer includes:
material for: 532 sites
total: 38 channels of 㢠14 pallets
 
117 frame 4.800 x 1,350 mm
76 blades about 5,600 mm
76 floor rails, approx. 5,600 mm
456 consoles

in the kanal14 x 1,200 x 800 mm pallets
ã? 1,400 mm wide 38 channels

space approx. 57.0 m width x depth approx. 6.0 m

the permissible load of the channel is 5,600 kg
(when uniformly distribuited load) 800 kg per pallet!

connectors - easy assembly!

frames are assembled.
preassembled.
use shelves in other versions, please contact us.
we offer a comprehensive range of new and used racks and accessories and can assist in your planning.

other accessories such as:
starting corners, piling wall, pallet stops, chipboard, grates, depth bars u.v.m. available.

shipping:
cheaper shipping with several low-cost carriers can.
please ask the freight specifying your postcode and location, as well as the desired quantity.
 
service offerings:
extensions, conversions, repairs

shelf test according to bgr 234 / din en 15635
purchase, recovery, disposal WE OFFER FOR SALE: A USED DRIVE-IN RACK SYSTEM FROM STOCK CONVERSION MAXRAC EC TOPP, AS NEW BJ. 2010 EX WORKS WAREHOUSE 21698 HARSEFELD 532 PITCHES MORE OR REDUCED QUANTITIES POSSIBLE. TOTAL: APPROX. 4,000 PARKING SPACES AVAILABLE INSTALLATION AVAILABLE, PLEASE ENQUIRE. PLEASE COMPARE OUR OFFER! BBSINRV2EE OUR SHELVES ARE CERTIFIED ACCORDING TO ISO 9001:2000 THIS MEANS: CONSTANT QUALITY CONTROL! MEET MAXRAC SHELVES THE EUROPEAN STANDARD FEM DIN EN 15635 BGR 234 OF THE BGS THE AUSTRALIAN AS4084-2012 STANDARD AND WITHSTAND THE T&ATILDE;?V TESTS. THIS OFFER INCLUDES: MATERIAL FOR: 532 SITES TOTAL: 38 CHANNELS OF &ATILDE;&CENT; 14 PALLETS 117 FRAME 4.800 X 1,350 MM 76 BLADES ABOUT 5,600 MM 76 FLOOR RAILS, APPROX. 5,600 MM 456 CONSOLES IN THE KANAL14 X 1,200 X 800 MM PALLETS &ATILDE;? 1,400 MM WIDE 38 CHANNELS SPACE APPROX. 57.0 M WIDTH X DEPTH APPROX. 6.0 M THE PERMISSIBLE LOAD OF THE CHANNEL IS 5,600 KG (WHEN UNIFORMLY DISTRIBUITED LOAD) 800 KG PER PALLET! CONNECTORS - EASY ASSEMBLY! FRAMES ARE ASSEMBLED. PREASSEMBLED. USE SHELVES IN OTHER VERSIONS, PLEASE CONTACT US. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND CAN ASSIST IN YOUR PLANNING. OTHER ACCESSORIES SUCH AS: STARTING CORNERS, PILING WALL, PALLET STOPS, CHIPBOARD, GRATES, DEPTH BARS U.V.M. AVAILABLE. SHIPPING: CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE ASK THE FREIGHT SPECIFYING YOUR POSTCODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. SERVICE OFFERINGS: EXTENSIONS, CONVERSIONS, REPAIRS SHELF TEST ACCORDING TO BGR 234 / DIN EN 15635 PURCHASE, RECOVERY, DISPOSAL
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-knitting machine barudan elitepro
year of constr.: 2016
single knitting machine head
15 needles KNITTING MACHINE BARUDAN ELITEPRO YEAR OF CONSTR.: 2016 SINGLE KNITTING MACHINE HEAD 15 NEEDLES
Vendedor: Multi Sales Weinstädter
Año de construcción: usado
Ubicación: Land-snr 5080152

epr100, ae1rls, snr 5004180, a433 x 06092, epr100, ae1bbs SNR 5080152 EPR100, AE1RLS, SNR 5004180, A433 X 06092, EPR100, AE1BBS
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG
Año de construcción: usado
Precio: 3.000 €
Ubicación: Land--die bbs 550 ist ideal zum schneiden von weichem, hartem, trockenem oder gefrorenem holz bzw. holz-prismen  mit einer länge entsprechend der maschinenkonstruktion.<br/>-die max. schnittlänge ist abhängig von den verlängerungselementen<br/>-alle holzarten können mit dem gleichen sägeband geschnitten werden.<br/>-robuste und schwingungsfreie konstruktion<br/>-minimaler wartungsaufwand<br/>-einfache bedienung massive präzisionsgusslaufräder<br/>-präzisionsführungen<br/>-excenterspanner<br/>-vorschneiderschwenkmechanik<br/>-manuelle schnitthöheneinstellung<br/>-manueller vorschub<br/>-geliefert mit 4,6 m rollbahn<br/><br/>technische daten:<br/><br/>- max. stammdurchmesser: 550 mm<br/>- max. brettbreite: 530 mm<br/>- max. sägebandhub: 20 mm<br/>- max. schnitttiefe: 220 mm<br/>- schnittlänge grundversion: 3,7 m<br/>- verlängerungssektion: 2,3 m<br/>- max. schnittlänge: unlimitiert<br/>- min. schnnittlänge: 0,9 m<br/>- motorleistung antriebsrad s1 (100%) / s6: 4 kw / 5,6 kw<br/>- vorschub vertikal: optional<br/>- vorschub horizontal: manuell<br/>- max. vorschubgeschwindigkeit: manuell<br/>- laufraddurchmesser: 400 mm<br/>- laufradbreite: 25 mm<br/>- bimetallsägeband: 3200 x 27 x 0,9 mm<br/>- schnittfuge: 1,5 - 2,2 mm<br/>- sägebandgeschwindigkeit: 15 m/s<br/>- maschinenabmessung (bxhxl): 1750 x 1450 x 1660 x 4600 mm<br/>- gewicht: 355 kg<br/>- gewicht verlängerung: 76 kg option:<br/><br/>- rollenbahnverlängerung 2,3 m eur 560,-<br/>- bandsägeblatt 3200 x 30 mm eur 50,- -DIE BBS 550 IST IDEAL ZUM SCHNEIDEN VON WEICHEM, HARTEM, TROCKENEM ODER GEFRORENEM HOLZ BZW. HOLZ-PRISMEN  MIT EINER LäNGE ENTSPRECHEND DER MASCHINENKONSTRUKTION.
-DIE MAX. SCHNITTLäNGE IST ABHäNGIG VON DEN VERLäNGERUNGSELEMENTEN
-ALLE HOLZARTEN KöNNEN MIT DEM GLEICHEN SäGEBAND GESCHNITTEN WERDEN.
-ROBUSTE UND SCHWINGUNGSFREIE KONSTRUKTION
-MINIMALER WARTUNGSAUFWAND
-EINFACHE BEDIENUNG MASSIVE PRäZISIONSGUSSLAUFRäDER
-PRäZISIONSFüHRUNGEN
-EXCENTERSPANNER
-VORSCHNEIDERSCHWENKMECHANIK
-MANUELLE SCHNITTHöHENEINSTELLUNG
-MANUELLER VORSCHUB
-GELIEFERT MIT 4,6 M ROLLBAHN

TECHNISCHE DATEN:

- MAX. STAMMDURCHMESSER: 550 MM
- MAX. BRETTBREITE: 530 MM
- MAX. SäGEBANDHUB: 20 MM
- MAX. SCHNITTTIEFE: 220 MM
- SCHNITTLäNGE GRUNDVERSION: 3,7 M
- VERLäNGERUNGSSEKTION: 2,3 M
- MAX. SCHNITTLäNGE: UNLIMITIERT
- MIN. SCHNNITTLäNGE: 0,9 M
- MOTORLEISTUNG ANTRIEBSRAD S1 (100%) / S6: 4 KW / 5,6 KW
- VORSCHUB VERTIKAL: OPTIONAL
- VORSCHUB HORIZONTAL: MANUELL
- MAX. VORSCHUBGESCHWINDIGKEIT: MANUELL
- LAUFRADDURCHMESSER: 400 MM
- LAUFRADBREITE: 25 MM
- BIMETALLSäGEBAND: 3200 X 27 X 0,9 MM
- SCHNITTFUGE: 1,5 - 2,2 MM
- SäGEBANDGESCHWINDIGKEIT: 15 M/S
- MASCHINENABMESSUNG (BXHXL): 1750 X 1450 X 1660 X 4600 MM
- GEWICHT: 355 KG
- GEWICHT VERLäNGERUNG: 76 KG OPTION:

- ROLLENBAHNVERLäNGERUNG 2,3 M EUR 560,-
- BANDSäGEBLATT 3200 X 30 MM EUR 50,-
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Ubicación: Land-
	reconditioned braun-canali log band saw line	


	consisting of:

	pos. 1	1 log loader                       

	hydraulic, with 4 arms,
	
	1 roller conveyor in front of the bandsaw (for back cutting)

        pos. 2	1 braun-canali carriage                 

	type: b2k
	kind of movement:			hydraulic
	number of clamping heads:		4 pieces
	opening of the clamping heads:	1200 mm
	max. opening of the clamping dogs:	1000 mm
	max. cutting length:			2,0- 10,0 m
	max. log diameter:			1200 mm


	hydr. log tension with individual control of each clamping device. 

	1 braun-canali log rotation device with 3 arms
	(chain rotation device) 

	1 braun-canali carriage drive


	1 braun-canali electrical basis equipment for the 
	vertical log band saw


	including carriage control.







	pos. 3	1 braun-canali vertical log band saw                

	type: bbs. v1400

	band saw roller diameter:		1400 mm
	band saw roller width:			180 mm
	max. saw blade width:			206 mm
	max. saw blade speed:			42 m/s


	hydraulic clamping.
	saw blade tension adjustment through pneumatic clamping system.
	forward stroke adjustment of the saw blade through electro-mechanical adjustment
	of the upper band saw roller.

	1 main drive motor 1500-1 
	nominal power 75 kw,


	pos. 4	1 roller conveyor
                  
	width:		1200 mm
	support arms:	3 pieces (hydr.)
	length:		11m

	
	pos. 5	1 reloading cross conveyor
	
        hydr., 4 lines

	
	pos.6	1 roller conveyor
	
       length:		11m
	roller width:	1200 mm

	
	pos. 7	1 ejection cross conveyor                     
	
        4 lines
	1 deflecting wall

	pos. 8a   1 hydraulic unit                           

	
	pos. 8b   1 electrical control   

        

 RECONDITIONED BRAUN-CANALI LOG BAND SAW LINE CONSISTING OF: POS. 1 1 LOG LOADER HYDRAULIC, WITH 4 ARMS, 1 ROLLER CONVEYOR IN FRONT OF THE BANDSAW (FOR BACK CUTTING) POS. 2 1 BRAUN-CANALI CARRIAGE TYPE: B2K KIND OF MOVEMENT: HYDRAULIC NUMBER OF CLAMPING HEADS: 4 PIECES OPENING OF THE CLAMPING HEADS: 1200 MM MAX. OPENING OF THE CLAMPING DOGS: 1000 MM MAX. CUTTING LENGTH: 2,0- 10,0 M MAX. LOG DIAMETER: 1200 MM HYDR. LOG TENSION WITH INDIVIDUAL CONTROL OF EACH CLAMPING DEVICE. 1 BRAUN-CANALI LOG ROTATION DEVICE WITH 3 ARMS (CHAIN ROTATION DEVICE) 1 BRAUN-CANALI CARRIAGE DRIVE 1 BRAUN-CANALI ELECTRICAL BASIS EQUIPMENT FOR THE VERTICAL LOG BAND SAW INCLUDING CARRIAGE CONTROL. POS. 3 1 BRAUN-CANALI VERTICAL LOG BAND SAW TYPE: BBS. V1400 BAND SAW ROLLER DIAMETER: 1400 MM BAND SAW ROLLER WIDTH: 180 MM MAX. SAW BLADE WIDTH: 206 MM MAX. SAW BLADE SPEED: 42 M/S HYDRAULIC CLAMPING. SAW BLADE TENSION ADJUSTMENT THROUGH PNEUMATIC CLAMPING SYSTEM. FORWARD STROKE ADJUSTMENT OF THE SAW BLADE THROUGH ELECTRO-MECHANICAL ADJUSTMENT OF THE UPPER BAND SAW ROLLER. 1 MAIN DRIVE MOTOR 1500-1 NOMINAL POWER 75 KW, POS. 4 1 ROLLER CONVEYOR WIDTH: 1200 MM SUPPORT ARMS: 3 PIECES (HYDR.) LENGTH: 11M POS. 5 1 RELOADING CROSS CONVEYOR HYDR., 4 LINES POS.6 1 ROLLER CONVEYOR LENGTH: 11M ROLLER WIDTH: 1200 MM POS. 7 1 EJECTION CROSS CONVEYOR 4 LINES 1 DEFLECTING WALL POS. 8A 1 HYDRAULIC UNIT POS. 8B 1 ELECTRICAL CONTROL
Vendedor: Simon Möhringer Anlagenbau GmbH
Año de construcción: usado
Ubicación: Land-second hand boiler room installation which consist of two boilers by bay (bbs gmbh/ germany) type hdk 16000. each boiler has parametrs:
- working output of steam 16 tons/hour at 16 bar pressure.
- water volume - 32 tons
- total heating surface 400 m2
- outgoing saturated vapour temperature 204 c
- temperature of superheated steam - 260 c
each boiler is equipped with:
1) burner by saccke type skvg 100, can work on gase or oil. output: 11320 kw.
2) fuel economizer by bay, type riro eco, integrated construction, surface 200 m2. maximal pressure 16 bar at maximal temperature up to 204c.
3) superheater by bay, type hrc hha10ac 001, with volume 750 l and surface 90 m2. for work at pressure 16 bar and temperature 260c.
4) water feeding pumps: 
- 2 pumps by grundfos type cr 32, with output 30 m3/h, head 189 m, pressure 30 bar. driven by electric motors each 30 kw, 2950 rpm.
- lfp, type wr 40, with output 10.9 m3/h, head 167 m. driven by electric motor 7.5 kw, 2900 rpm.
5) blower fan - type mhi 45-70, working output from 15840 up to 17000 m3/h. driven by electric motor 37 kw, 2940 rpm.
6) blowdown flash tank with volume 650 l, working pressure up to 0.04 mpa
7) degassing tank, which is also a tank of feeding water - volume 9.4 m3, conical bottom.
each boiler has these functions:
- automatic adjustment of water level. 
- adjustment of pressure 
- adjustament of blowdown and surface blow off
- adjustment of air on burner
- safety switch off
- safety chain
- chain for adjustment of burner
- controls on pipes and valves
- reports and measurements 

boiler room is also equipped with - water preparation equipment. four pieces of underground tanks for oil, each with volume 100 m3, equipped with pumps for oil. two mild steel chimneys each with diameter 900 mm x height 35 m. tanks for condensate with volume 8m3 and 7m3. still installed.
   SECOND HAND BOILER ROOM INSTALLATION WHICH CONSIST OF TWO BOILERS BY BAY (BBS GMBH/ GERMANY) TYPE HDK 16000. EACH BOILER HAS PARAMETRS: - WORKING OUTPUT OF STEAM 16 TONS/HOUR AT 16 BAR PRESSURE. - WATER VOLUME - 32 TONS - TOTAL HEATING SURFACE 400 M2 - OUTGOING SATURATED VAPOUR TEMPERATURE 204 C - TEMPERATURE OF SUPERHEATED STEAM - 260 C EACH BOILER IS EQUIPPED WITH: 1) BURNER BY SACCKE TYPE SKVG 100, CAN WORK ON GASE OR OIL. OUTPUT: 11320 KW. 2) FUEL ECONOMIZER BY BAY, TYPE RIRO ECO, INTEGRATED CONSTRUCTION, SURFACE 200 M2. MAXIMAL PRESSURE 16 BAR AT MAXIMAL TEMPERATURE UP TO 204C. 3) SUPERHEATER BY BAY, TYPE HRC HHA10AC 001, WITH VOLUME 750 L AND SURFACE 90 M2. FOR WORK AT PRESSURE 16 BAR AND TEMPERATURE 260C. 4) WATER FEEDING PUMPS: - 2 PUMPS BY GRUNDFOS TYPE CR 32, WITH OUTPUT 30 M3/H, HEAD 189 M, PRESSURE 30 BAR. DRIVEN BY ELECTRIC MOTORS EACH 30 KW, 2950 RPM. - LFP, TYPE WR 40, WITH OUTPUT 10.9 M3/H, HEAD 167 M. DRIVEN BY ELECTRIC MOTOR 7.5 KW, 2900 RPM. 5) BLOWER FAN - TYPE MHI 45-70, WORKING OUTPUT FROM 15840 UP TO 17000 M3/H. DRIVEN BY ELECTRIC MOTOR 37 KW, 2940 RPM. 6) BLOWDOWN FLASH TANK WITH VOLUME 650 L, WORKING PRESSURE UP TO 0.04 MPA 7) DEGASSING TANK, WHICH IS ALSO A TANK OF FEEDING WATER - VOLUME 9.4 M3, CONICAL BOTTOM. EACH BOILER HAS THESE FUNCTIONS: - AUTOMATIC ADJUSTMENT OF WATER LEVEL. - ADJUSTMENT OF PRESSURE - ADJUSTAMENT OF BLOWDOWN AND SURFACE BLOW OFF - ADJUSTMENT OF AIR ON BURNER - SAFETY SWITCH OFF - SAFETY CHAIN - CHAIN FOR ADJUSTMENT OF BURNER - CONTROLS ON PIPES AND VALVES - REPORTS AND MEASUREMENTS BOILER ROOM IS ALSO EQUIPPED WITH - WATER PREPARATION EQUIPMENT. FOUR PIECES OF UNDERGROUND TANKS FOR OIL, EACH WITH VOLUME 100 M3, EQUIPPED WITH PUMPS FOR OIL. TWO MILD STEEL CHIMNEYS EACH WITH DIAMETER 900 MM X HEIGHT 35 M. TANKS FOR CONDENSATE WITH VOLUME 8M3 AND 7M3. STILL INSTALLED.
Vendedor: Perry Machinery Poland
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BARUDAN types: