692 ofertas

Año de construcción: usado
Ubicación: Land-built in 2008
fanuc 18i tb control
traverse paths x 270 mm y +-60 mm z 720 mm
weight 4,200 kg without accessories
turning diameter over slide 320 mm
turning diameter over bed 530 mm
maximum turning length with lining 60 mm
main spindle, counter spindle 4,000 rpm
turret baruffaldi 12 x vdi40 with driven tool stations

part catcher
chip conveyor
short bar loader breuning irco ils-rbk 10012, built 07/2011
 BUILT IN 2008 FANUC 18I TB CONTROL TRAVERSE PATHS X 270 MM Y +-60 MM Z 720 MM WEIGHT 4,200 KG WITHOUT ACCESSORIES TURNING DIAMETER OVER SLIDE 320 MM TURNING DIAMETER OVER BED 530 MM MAXIMUM TURNING LENGTH WITH LINING 60 MM MAIN SPINDLE, COUNTER SPINDLE 4,000 RPM TURRET BARUFFALDI 12 X VDI40 WITH DRIVEN TOOL STATIONS PART CATCHER CHIP CONVEYOR SHORT BAR LOADER BREUNING IRCO ILS-RBK 10012, BUILT 07/2011
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds\r\nprotective device, moveable\r\nstainless steel bowl \r\n MAX. 120 KG DOUGH, 2 SPEEDS\R\NPROTECTIVE DEVICE, MOVEABLE\R\NSTAINLESS STEEL BOWL \R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-built in 2005
control siemens 840 d shopturn
traverse paths x 210 mm z 450 mm
power-on hours 26.500 h
spindle speed 6,000 rpm
centre distance 600 mm
circulating bed 600 mm
circulation over cross slide 300 mm
swivel diameter 246 mm
bar passage 50 mm
c-axis torque 155 nm

y-axis
driven tools awg 30
tailstock
part catcher + part conveyor
automatic door
chip conveyor
short bar loader breuning irco rbk 10012, built in 2005

main spindle is broken! BUILT IN 2005 CONTROL SIEMENS 840 D SHOPTURN TRAVERSE PATHS X 210 MM Z 450 MM POWER-ON HOURS 26.500 H SPINDLE SPEED 6,000 RPM CENTRE DISTANCE 600 MM CIRCULATING BED 600 MM CIRCULATION OVER CROSS SLIDE 300 MM SWIVEL DIAMETER 246 MM BAR PASSAGE 50 MM C-AXIS TORQUE 155 NM Y-AXIS DRIVEN TOOLS AWG 30 TAILSTOCK PART CATCHER + PART CONVEYOR AUTOMATIC DOOR CHIP CONVEYOR SHORT BAR LOADER BREUNING IRCO RBK 10012, BUILT IN 2005 MAIN SPINDLE IS BROKEN!
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land-technical data:

-pressure capacity 350 t.
	-max working width 5050 mm
	-stand through 4100 mm
	-max mounting height approx.						  400 mm
	-stroke approx.	  						  240 mm
	-table width approx.						  350 mm
	-height approx.						            1200 mm
	-drive 400 v / 37.0 kw - space requirement approx.       b h 5500 x 3390 x h 2300 mm
	-weight approx.				          36000 kg
-with:-control cybelec dnc 50 y 1 + 2 bj. 2012
	-rear gauge - universal matrix
-highlight tool
 TECHNICAL DATA: -PRESSURE CAPACITY 350 T. -MAX WORKING WIDTH 5050 MM -STAND THROUGH 4100 MM -MAX MOUNTING HEIGHT APPROX. 400 MM -STROKE APPROX. 240 MM -TABLE WIDTH APPROX. 350 MM -HEIGHT APPROX. 1200 MM -DRIVE 400 V / 37.0 KW - SPACE REQUIREMENT APPROX. B H 5500 X 3390 X H 2300 MM -WEIGHT APPROX. 36000 KG -WITH:-CONTROL CYBELEC DNC 50 Y 1 + 2 BJ. 2012 -REAR GAUGE - UNIVERSAL MATRIX -HIGHLIGHT TOOL
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-max. 20 kg dough, 3 speeds, security device\r\nbowl + doughhook made from stainless steel, MAX. 20 KG DOUGH, 3 SPEEDS, SECURITY DEVICE\R\NBOWL + DOUGHHOOK MADE FROM STAINLESS STEEL,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-built in 1999
control heidenhain tnc 410 ma
traverse paths x 630 mm y 500 mm z 500 mm
work spindle 20-7.000 rpm
iso40 tool holder
16 x tool changer
vertical quill stroke 75 mm
range of spindle head 0-90 â°
electronic handwheel
chuck system on work table 900/528
weight 4,800 kg BUILT IN 1999 CONTROL HEIDENHAIN TNC 410 MA TRAVERSE PATHS X 630 MM Y 500 MM Z 500 MM WORK SPINDLE 20-7.000 RPM ISO40 TOOL HOLDER 16 X TOOL CHANGER VERTICAL QUILL STROKE 75 MM RANGE OF SPINDLE HEAD 0-90 ° ELECTRONIC HANDWHEEL CHUCK SYSTEM ON WORK TABLE 900/528 WEIGHT 4,800 KG
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land-max.  75 kg flour, 2 speeds, saftey device\r\nbowl + doughhook stainless steel\r\n MAX. 75 KG FLOUR, 2 SPEEDS, SAFTEY DEVICE\R\NBOWL + DOUGHHOOK STAINLESS STEEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-built in 2003
control heidenhain tnc 430
traverse paths x 630 mmy 500 mm z 500 mm
hours of operation 5.480 h
power-on hours 19.327 h
spindle speed 8,000 rpm
24 x tool changer
chuck sk40
coolant system
ikz BUILT IN 2003 CONTROL HEIDENHAIN TNC 430 TRAVERSE PATHS X 630 MMY 500 MM Z 500 MM HOURS OF OPERATION 5.480 H POWER-ON HOURS 19.327 H SPINDLE SPEED 8,000 RPM 24 X TOOL CHANGER CHUCK SK40 COOLANT SYSTEM IKZ
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land- rota ncw 225 ROTA NCW 225
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-overview
brand: darley
model: vs 6100x8
application type: shearing 
machine type: shearing machines 
availability: immediately 
production year: 1993
location: the netherlands
origin country: the netherlands 
production hours: 13200

general data
measurements width: 6800 mm 
measurements depth: 3500 mm 
measurements height: 2700 mm 
machine weight: 20000 kg

control unit
brand: darley

main drive
shearing force: 1800

movement
x-axis movement: 6000 mm

max material thickness
steel: 8 mm
stainless steel: 8 mm

media
main electronic connection: 380 v

see full technical specifications of this machine at: abc://bit.ly/2pd8oz0 OVERVIEW BRAND: DARLEY MODEL: VS 6100X8 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1993 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: THE NETHERLANDS PRODUCTION HOURS: 13200 GENERAL DATA MEASUREMENTS WIDTH: 6800 MM MEASUREMENTS DEPTH: 3500 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 20000 KG CONTROL UNIT BRAND: DARLEY MAIN DRIVE SHEARING FORCE: 1800 MOVEMENT X-AXIS MOVEMENT: 6000 MM MAX MATERIAL THICKNESS STEEL: 8 MM STAINLESS STEEL: 8 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2PD8OZ0
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2006 
control unit: ec100 
robot: battenfeld 

injection unit: es 2500/...
screw diameter: 70 mm 
injection pressure: 2200 bar 
injection volume: 1100 ccm 
shot capacity: 930 g 

clamping unit: .../390 k sl
clamping force: 390 t 
platen size: 1080 x 1080 mm 
distance between tie bars: 735 x 735 mm 
mould height: 250...660 mm 
opening storke: 700 mm 
max.daylight: 1360 mm 
ejector stroke: 240 mm 
drive power of the hydraulic pump: 55 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 8,05 x 1,9 x 2,04 m 
weight: 23.000 kg 

equipment:
- machine is equipped with a battenfeld robot
- fast runner machine
- accumulator
- needle valve nozzle
- srew drive by three phase motor
- bimetallic barrels
- 1 x core pull
- 16 x temperature controller for mould hotrunner
- 3 x pneumatic valve MACHINE SPECIFICATION YEAR: 2006 CONTROL UNIT: EC100 ROBOT: BATTENFELD INJECTION UNIT: ES 2500/... SCREW DIAMETER: 70 MM INJECTION PRESSURE: 2200 BAR INJECTION VOLUME: 1100 CCM SHOT CAPACITY: 930 G CLAMPING UNIT: .../390 K SL CLAMPING FORCE: 390 T PLATEN SIZE: 1080 X 1080 MM DISTANCE BETWEEN TIE BARS: 735 X 735 MM MOULD HEIGHT: 250...660 MM OPENING STORKE: 700 MM MAX.DAYLIGHT: 1360 MM EJECTOR STROKE: 240 MM DRIVE POWER OF THE HYDRAULIC PUMP: 55 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 8,05 X 1,9 X 2,04 M WEIGHT: 23.000 KG EQUIPMENT: - MACHINE IS EQUIPPED WITH A BATTENFELD ROBOT - FAST RUNNER MACHINE - ACCUMULATOR - NEEDLE VALVE NOZZLE - SREW DRIVE BY THREE PHASE MOTOR - BIMETALLIC BARRELS - 1 X CORE PULL - 16 X TEMPERATURE CONTROLLER FOR MOULD HOTRUNNER - 3 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: unilog 4000 b 

injection unit: .../315 cdc
screw diameter: 35 mm 
injection pressure: 2057 bar 
injection volume: 154 ccm 
shot capacity: 140 g 

clamping unit: ba 1000/...
clamping force: 100 t 
platen size: 640 x 640 mm 
distance between tie bars: 420 x 420 mm 
mould height: 250 mm 
opening storke: 475 mm 
max.daylight: 725 mm 
ejector stroke: 150 mm 

general information:
delivery time: off hand 
machine dimensions(m) lxwxh: 4,4 x 1,3 x 2,0 m 
weight: 4.600 kg 

equipment:
- serial number: c100906820989 MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: UNILOG 4000 B INJECTION UNIT: .../315 CDC SCREW DIAMETER: 35 MM INJECTION PRESSURE: 2057 BAR INJECTION VOLUME: 154 CCM SHOT CAPACITY: 140 G CLAMPING UNIT: BA 1000/... CLAMPING FORCE: 100 T PLATEN SIZE: 640 X 640 MM DISTANCE BETWEEN TIE BARS: 420 X 420 MM MOULD HEIGHT: 250 MM OPENING STORKE: 475 MM MAX.DAYLIGHT: 725 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: OFF HAND MACHINE DIMENSIONS(M) LXWXH: 4,4 X 1,3 X 2,0 M WEIGHT: 4.600 KG EQUIPMENT: - SERIAL NUMBER: C100906820989
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-gasparini pbs 45-1600, 4 axis bending press, year 1997
gasparini pbs 75-2500,  4 axis, bending press,  year 1997
gasparini pbs 200-5000, 6 axis bending press, year 1997  GASPARINI PBS 45-1600, 4 AXIS BENDING PRESS, YEAR 1997 GASPARINI PBS 75-2500, 4 AXIS, BENDING PRESS, YEAR 1997 GASPARINI PBS 200-5000, 6 AXIS BENDING PRESS, YEAR 1997
Vendedor: STOCKEUROSTOCK SRL
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 800kn
stroke: 1200mm
power: 7, 5kw
bending length: 2 m
control: delem da58 PRESSING FORCE: 800KN STROKE: 1200MM POWER: 7, 5KW BENDING LENGTH: 2 M CONTROL: DELEM DA58
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Ubicación: Land-make: boxermaschinen<br/>type of machine: r850<br/>year of manufacture: 2015<br/>machines weight: 2000 kg<br/>control system: esa<br/>operating time: 10<br/>press power: 25 t<br/>sheet thickness: 0,5-5,0 mm<br/>bending length: 835 mm<br/>material thickness:  von 0,5 bis 5,0 mm<br/> MAKE: BOXERMASCHINEN
TYPE OF MACHINE: R850
YEAR OF MANUFACTURE: 2015
MACHINES WEIGHT: 2000 KG
CONTROL SYSTEM: ESA
OPERATING TIME: 10
PRESS POWER: 25 T
SHEET THICKNESS: 0,5-5,0 MM
BENDING LENGTH: 835 MM
MATERIAL THICKNESS: VON 0,5 BIS 5,0 MM
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 124.000 €
Ubicación: Land-

a 1 121 
1 aseptic working and filling hamba cup filling machine
type bk 8008/8-p, 8-bahnig
für 68 mm becherformat
manufacturer year is 1992
capacity : approx. 28.800 cups per hour = 30 strokes
with following equipment:
cup bars magazine and cup sterilisation station with h2o2 technique
with 2 main dosing fillers for yoghurt or puddings
with 1 dosing station for foamed cream or for other liquid toppings
with lid sterilisation station and lid apply station
with lid closing control station
with a carton packaging machine from a&f
with a carton producing machine from a&f, 1.250 carton per hour
length of the machine is approx. 17 m without a & f packaging machine

price up standing point:	124.000,00 euro








 A 1 121 1 ASEPTIC WORKING AND FILLING HAMBA CUP FILLING MACHINE TYPE BK 8008/8-P, 8-BAHNIG FüR 68 MM BECHERFORMAT MANUFACTURER YEAR IS 1992 CAPACITY : APPROX. 28.800 CUPS PER HOUR = 30 STROKES WITH FOLLOWING EQUIPMENT: CUP BARS MAGAZINE AND CUP STERILISATION STATION WITH H2O2 TECHNIQUE WITH 2 MAIN DOSING FILLERS FOR YOGHURT OR PUDDINGS WITH 1 DOSING STATION FOR FOAMED CREAM OR FOR OTHER LIQUID TOPPINGS WITH LID STERILISATION STATION AND LID APPLY STATION WITH LID CLOSING CONTROL STATION WITH A CARTON PACKAGING MACHINE FROM A&F WITH A CARTON PRODUCING MACHINE FROM A&F, 1.250 CARTON PER HOUR LENGTH OF THE MACHINE IS APPROX. 17 M WITHOUT A & F PACKAGING MACHINE PRICE UP STANDING POINT: 124.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: used machinery auction RESALE 9.000 €
Ubicación: Land-weight approx.: 28500 kg<br/>dimensions (l x w x h) approx.: 10000 x 4000 x 2800 mm<br/>description: battenfeld bk-t 5000/2500 injection moulding machine<br> - machine no.: 48115<br> - operating voltage: 220/380 v, 50 hz<br> - closing force: 500 t<br> - daylight: 815 mm<br> - opening path: max. 850 mm<br> - installation height: min./max. 375/850 mm<br> - ejector force: 137 kn<br> - ejector stroke: 250 mm<br> - core pulls: 2<br> - screw diameter: 70 mm<br> - screw path: max. 300 mm<br> - screw speed: max. 170 rpm<br> - injection force: max. 825 kn<br> - max. injection weight: 1.062 g<br> - spec. injection pressure: 2.143 bar<br> - control system: unilog 4000 b<br> - injection moulds are not in scope of delivery!<br> - see video WEIGHT APPROX.: 28500 KG
DIMENSIONS (L X W X H) APPROX.: 10000 X 4000 X 2800 MM
DESCRIPTION: BATTENFELD BK-T 5000/2500 INJECTION MOULDING MACHINE
- MACHINE NO.: 48115
- OPERATING VOLTAGE: 220/380 V, 50 HZ
- CLOSING FORCE: 500 T
- DAYLIGHT: 815 MM
- OPENING PATH: MAX. 850 MM
- INSTALLATION HEIGHT: MIN./MAX. 375/850 MM
- EJECTOR FORCE: 137 KN
- EJECTOR STROKE: 250 MM
- CORE PULLS: 2
- SCREW DIAMETER: 70 MM
- SCREW PATH: MAX. 300 MM
- SCREW SPEED: MAX. 170 RPM
- INJECTION FORCE: MAX. 825 KN
- MAX. INJECTION WEIGHT: 1.062 G
- SPEC. INJECTION PRESSURE: 2.143 BAR
- CONTROL SYSTEM: UNILOG 4000 B
- INJECTION MOULDS ARE NOT IN SCOPE OF DELIVERY!
- SEE VIDEO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350... mm 
opening storke: 425 mm 
max.daylight: 1200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350... MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-make brogli (continuous mixing device), type bkca 750, no wo 2769, extra specifications consisting of homogeniser and cooler, homogeniser: material stainless steel, motor 2,4/3,0 kw, 380 volt, 1410/2830 rpm, scraping cooler: material stainless steel, motor 7,5 kw, 380 volt, jacket, mounted on frame, wih switchgear, the 3 stirring vessels are missing, floorspace 1,5x1,4 m, total height 2,2 mprocessing vesselsprocessing vessels > processing vessels MAKE BROGLI (CONTINUOUS MIXING DEVICE), TYPE BKCA 750, NO WO 2769, EXTRA SPECIFICATIONS CONSISTING OF HOMOGENISER AND COOLER, HOMOGENISER: MATERIAL STAINLESS STEEL, MOTOR 2,4/3,0 KW, 380 VOLT, 1410/2830 RPM, SCRAPING COOLER: MATERIAL STAINLESS STEEL, MOTOR 7,5 KW, 380 VOLT, JACKET, MOUNTED ON FRAME, WIH SWITCHGEAR, THE 3 STIRRING VESSELS ARE MISSING, FLOORSPACE 1,5X1,4 M, TOTAL HEIGHT 2,2 MPROCESSING VESSELSPROCESSING VESSELS > PROCESSING VESSELS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-battenfeld 160 ton. injection molding

type tm 1600/750
construction year 2001
dbb 520×520mm.
moving plane stroke 480
min / max mould thickness 225-550
2 jack
n.1 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment BATTENFELD 160 TON. INJECTION MOLDING TYPE TM 1600/750 CONSTRUCTION YEAR 2001 DBB 520×520MM. MOVING PLANE STROKE 480 MIN / MAX MOULD THICKNESS 225-550 2 JACK N.1 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-rotating sieve /centrifugal dryer + tempered water system, make bkg bruckmann & kreyenborg granuliertechnik, type tew a-2000, no 961008/2, new 1997, material stainless steel (1.4301), sieve sizes dia. 400x1050mm, with inspection hatch, motor 6,5 kw, 380-420/660-690 volt, with sieve cage, mounted on mild steel frame, floor space 3,9x1,5 m, total height 2,7 m, extra specifications with plate heat exchanger make gea ecoflex, type vt-20 cds10 with pump make ksb frankenthal, type etachrom bc 40-200, motor 11 kw with tempered water system (electric heating, 40 kw) with fan, motor 0,75 kw, 230/400 voltrotating sievessieves > rotating sieves ROTATING SIEVE /CENTRIFUGAL DRYER + TEMPERED WATER SYSTEM, MAKE BKG BRUCKMANN & KREYENBORG GRANULIERTECHNIK, TYPE TEW A-2000, NO 961008/2, NEW 1997, MATERIAL STAINLESS STEEL (1.4301), SIEVE SIZES DIA. 400X1050MM, WITH INSPECTION HATCH, MOTOR 6,5 KW, 380-420/660-690 VOLT, WITH SIEVE CAGE, MOUNTED ON MILD STEEL FRAME, FLOOR SPACE 3,9X1,5 M, TOTAL HEIGHT 2,7 M, EXTRA SPECIFICATIONS WITH PLATE HEAT EXCHANGER MAKE GEA ECOFLEX, TYPE VT-20 CDS10 WITH PUMP MAKE KSB FRANKENTHAL, TYPE ETACHROM BC 40-200, MOTOR 11 KW WITH TEMPERED WATER SYSTEM (ELECTRIC HEATING, 40 KW) WITH FAN, MOTOR 0,75 KW, 230/400 VOLTROTATING SIEVESSIEVES > ROTATING SIEVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2001 
control unit: unilog 9000 c 
robot: unirob r15 

injection unit: .../5400
screw diameter: 85 mm 
injection pressure: 1612 bar 
injection volume: 2856 ccm 
shot capacity: 2600 g 

clamping unit: hm 6500/...
clamping force: 650 t 
platen size: 1400 x 1400 mm 
distance between tie bars: 1000 x 1000 mm 
mould height: 600...1000 mm 
opening storke: 1000 mm 
max.daylight: 2000 mm 
ejector stroke: 250 mm 
drive power of the hydraulic pump: 74 kw 
cylinder heating power: 56,8 kw 
general information:

delivery time: now 
machine dimensions(m) lxwxh: 9.73 x 2.19 x 2.56 m 
weight: 41.000 kg 

equipment:
- bimetallic barrel
- 2 x pneumatic valve
- 2 x core pull
- increased oil cooler
- with conveyor belt
- robot interface as per euromap 12 MACHINE SPECIFICATION YEAR: 2001 CONTROL UNIT: UNILOG 9000 C ROBOT: UNIROB R15 INJECTION UNIT: .../5400 SCREW DIAMETER: 85 MM INJECTION PRESSURE: 1612 BAR INJECTION VOLUME: 2856 CCM SHOT CAPACITY: 2600 G CLAMPING UNIT: HM 6500/... CLAMPING FORCE: 650 T PLATEN SIZE: 1400 X 1400 MM DISTANCE BETWEEN TIE BARS: 1000 X 1000 MM MOULD HEIGHT: 600...1000 MM OPENING STORKE: 1000 MM MAX.DAYLIGHT: 2000 MM EJECTOR STROKE: 250 MM DRIVE POWER OF THE HYDRAULIC PUMP: 74 KW CYLINDER HEATING POWER: 56,8 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 9.73 X 2.19 X 2.56 M WEIGHT: 41.000 KG EQUIPMENT: - BIMETALLIC BARREL - 2 X PNEUMATIC VALVE - 2 X CORE PULL - INCREASED OIL COOLER - WITH CONVEYOR BELT - ROBOT INTERFACE AS PER EUROMAP 12
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-drying oven, make david + baader / dbk ofensysteme, type ithu, no 800234, new 1998, material stainless steel, max. temperature 160 °c, number of compartments: 1, capacity 4,4 m³ (nett. capacity 3,36 m³), internal width 1,85 m, internal depth 1,35 m, internal height 1,4 m, steam heating, number of doors: 2, with air circulation, with fan exhaust air volume at 20 °c 70m³/h, motor 1,1 kw, 230/400 volt, with rack mounted on wheels (2x), with trays (± 800x300x85), with switchgear, floorspace 2,6x2,6 m, total height 2,3 m, weight 1750 kgdrying ovensdryers > drying ovens DRYING OVEN, MAKE DAVID + BAADER / DBK OFENSYSTEME, TYPE ITHU, NO 800234, NEW 1998, MATERIAL STAINLESS STEEL, MAX. TEMPERATURE 160 °C, NUMBER OF COMPARTMENTS: 1, CAPACITY 4,4 M³ (NETT. CAPACITY 3,36 M³), INTERNAL WIDTH 1,85 M, INTERNAL DEPTH 1,35 M, INTERNAL HEIGHT 1,4 M, STEAM HEATING, NUMBER OF DOORS: 2, WITH AIR CIRCULATION, WITH FAN EXHAUST AIR VOLUME AT 20 °C 70M³/H, MOTOR 1,1 KW, 230/400 VOLT, WITH RACK MOUNTED ON WHEELS (2X), WITH TRAYS (± 800X300X85), WITH SWITCHGEAR, FLOORSPACE 2,6X2,6 M, TOTAL HEIGHT 2,3 M, WEIGHT 1750 KGDRYING OVENSDRYERS > DRYING OVENS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machining center biesse skipper v 31
2015.
total capacity of 12 kw
working range x - 2500 mm
workspace y - 900 mm
work area z - 70 mm
milling unit 4.5 kw
speed up to 24000 rpm
tool clamping system iso 30
z - 10 st horizontal drill spindles x - 4 pcs
vertical drill y - 2 pcs
saw blades in the x-axis
biesseworks software
weight ca. 1400 kg

the machining center is a compact and versatile solution of biesse skipper v31, combines the flexibility and power in a small footprint. the machine is the ideal entry-level solution for flexible drilling, e.g. for special disk formats, for small batch sizes, and for a just-in-time production.
 MACHINING CENTER BIESSE SKIPPER V 31 2015. TOTAL CAPACITY OF 12 KW WORKING RANGE X - 2500 MM WORKSPACE Y - 900 MM WORK AREA Z - 70 MM MILLING UNIT 4.5 KW SPEED UP TO 24000 RPM TOOL CLAMPING SYSTEM ISO 30 Z - 10 ST HORIZONTAL DRILL SPINDLES X - 4 PCS VERTICAL DRILL Y - 2 PCS SAW BLADES IN THE X-AXIS BIESSEWORKS SOFTWARE WEIGHT CA. 1400 KG THE MACHINING CENTER IS A COMPACT AND VERSATILE SOLUTION OF BIESSE SKIPPER V31, COMBINES THE FLEXIBILITY AND POWER IN A SMALL FOOTPRINT. THE MACHINE IS THE IDEAL ENTRY-LEVEL SOLUTION FOR FLEXIBLE DRILLING, E.G. FOR SPECIAL DISK FORMATS, FOR SMALL BATCH SIZES, AND FOR A JUST-IN-TIME PRODUCTION.
Vendedor: Marevi
Año de construcción: usado
Ubicación: Land-filter press, make mse, type k/mfp-630-40/30-32k-p-l-s+npl+dlmp, no 0201050012, new 2002, platen material plastic, frame material mild steel, recessed chamber platens, number of platens 37 +2 endplates, internal platen sizes 510x510mm, external platen sizes 630x630mm, platen thickness 55mm, working pressure 7 bar, hydraulic closing, with hydraulic unit type bkes 30-15-p-ss, motor 22 kw, 230/400 volt, with switchgear, floorspace 5,4x1,6 m, total height 1,9 mfilterpressesfilters > filterpresses FILTER PRESS, MAKE MSE, TYPE K/MFP-630-40/30-32K-P-L-S+NPL+DLMP, NO 0201050012, NEW 2002, PLATEN MATERIAL PLASTIC, FRAME MATERIAL MILD STEEL, RECESSED CHAMBER PLATENS, NUMBER OF PLATENS 37 +2 ENDPLATES, INTERNAL PLATEN SIZES 510X510MM, EXTERNAL PLATEN SIZES 630X630MM, PLATEN THICKNESS 55MM, WORKING PRESSURE 7 BAR, HYDRAULIC CLOSING, WITH HYDRAULIC UNIT TYPE BKES 30-15-P-SS, MOTOR 22 KW, 230/400 VOLT, WITH SWITCHGEAR, FLOORSPACE 5,4X1,6 M, TOTAL HEIGHT 1,9 MFILTERPRESSESFILTERS > FILTERPRESSES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-max. closing force: 500kn, distance between tie bars: 320x320mm, installation height: 250-450mm, max. opening stroke: 250mm, max. plate distance: 700mm, screw diameter: 30mm, specific injection pressure: 2042bar, max. injection weight: 95g, stroke volume: 106cm³, operational hours: ca. 60.000h, also available is one robot sepro pip 55 mpa-ii p tc: load: 3kg. MAX. CLOSING FORCE: 500KN, DISTANCE BETWEEN TIE BARS: 320X320MM, INSTALLATION HEIGHT: 250-450MM, MAX. OPENING STROKE: 250MM, MAX. PLATE DISTANCE: 700MM, SCREW DIAMETER: 30MM, SPECIFIC INJECTION PRESSURE: 2042BAR, MAX. INJECTION WEIGHT: 95G, STROKE VOLUME: 106CM³, OPERATIONAL HOURS: CA. 60.000H, ALSO AVAILABLE IS ONE ROBOT SEPRO PIP 55 MPA-II P TC: LOAD: 3KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-make bkg bruckmann & kreyenborg gmbh münster, type twe a-2000, motor 6,5 kw, 380-420/660-690 vol, new 1997, motor 6,5 kw, 380-420/660-690 volt, mach.no. 961008/1, with gea ecoflex plate heat exchang, extra specifications with pump make ksb frankenthal, type etachrom bc 40-200 motor 11 kw, 400 volt, tempered water system with electric heating (40 kw) dimensions (lxwxh): 390 x 150 x 270 cmgranulate separatorsplastic machinery > granulate separators MAKE BKG BRUCKMANN & KREYENBORG GMBH MüNSTER, TYPE TWE A-2000, MOTOR 6,5 KW, 380-420/660-690 VOL, NEW 1997, MOTOR 6,5 KW, 380-420/660-690 VOLT, MACH.NO. 961008/1, WITH GEA ECOFLEX PLATE HEAT EXCHANG, EXTRA SPECIFICATIONS WITH PUMP MAKE KSB FRANKENTHAL, TYPE ETACHROM BC 40-200 MOTOR 11 KW, 400 VOLT, TEMPERED WATER SYSTEM WITH ELECTRIC HEATING (40 KW) DIMENSIONS (LXWXH): 390 X 150 X 270 CMGRANULATE SEPARATORSPLASTIC MACHINERY > GRANULATE SEPARATORS
Vendedor: Foeth
Año de construcción: usado
Precio: 21.000 €
Ubicación: Land-bruderer bsta 30

pressure 30 ton
up to 600 number of strokes/min feeder from left to right
table size: 545 x 470 mm
central lubrication
total power requirement: 5.5 kw
weight of the machine: 2.5t
 BRUDERER BSTA 30 PRESSURE 30 TON UP TO 600 NUMBER OF STROKES/MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM CENTRAL LUBRICATION TOTAL POWER REQUIREMENT: 5.5 KW WEIGHT OF THE MACHINE: 2.5T
Vendedor: Mobilija.DOO
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 800 x 1200 x 600 mm<br/>description: consisting of 8 pcs. rf 180 and 2 pcs. rf 200 WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1200 X 600 MM
DESCRIPTION: CONSISTING OF 8 PCS. RF 180 AND 2 PCS. RF 200
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: lvd
model: mvs 62/16
application type: shearing 
machine type: shearing machines 
availability: immediately 
production year: 1981
location: the netherlands
origin country: belgium 
production hours: 6000

general data
measurements width: 6500 mm 
measurements depth: 2500 mm 
measurements height: 3850 mm 
machine weight: 35000 kg

max material thickness
steel: 16 mm
stainless steel: 16 mm 
aluminium: 20 mm

media
main electronic connection: 380 v

see full technical specifications of this machine at:
abc://bit.ly/2qgeuq9 OVERVIEW BRAND: LVD MODEL: MVS 62/16 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1981 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: BELGIUM PRODUCTION HOURS: 6000 GENERAL DATA MEASUREMENTS WIDTH: 6500 MM MEASUREMENTS DEPTH: 2500 MM MEASUREMENTS HEIGHT: 3850 MM MACHINE WEIGHT: 35000 KG MAX MATERIAL THICKNESS STEEL: 16 MM STAINLESS STEEL: 16 MM ALUMINIUM: 20 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2QGEUQ9
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 1500 x 600 x 1200 mm<br/>description: air volume approx. 270 l, 1-piston-compressor, 380 v WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 600 X 1200 MM
DESCRIPTION: AIR VOLUME APPROX. 270 L, 1-PISTON-COMPRESSOR, 380 V
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gebr. electr. chain hoist make bks-yale
	model chf5-10/10-5. no.: 5148

lifting capacity 500/1000 kg
	main hub 10/5 m / min
	fine stroke 2.5/1.25 m / min
	motor 1/0.25 kw
	power supply 400 v
	with electric trolley for i-beam
 GEBR. ELECTR. CHAIN HOIST MAKE BKS-YALE MODEL CHF5-10/10-5. NO.: 5148 LIFTING CAPACITY 500/1000 KG MAIN HUB 10/5 M / MIN FINE STROKE 2.5/1.25 M / MIN MOTOR 1/0.25 KW POWER SUPPLY 400 V WITH ELECTRIC TROLLEY FOR I-BEAM
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: used machinery auction RESALE 2.900 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 65 x 515 x 1920 mm<br/>description: high quality drilling machine for industrial use. the machine is also suitable for multi-stage operation. - thread cutting device - precisely adjustable drilling depth stop - via rack and hand crank - height-adjustable work table - base plate with t-slots - high concentricity accuracy less than 0.02 mm - robust, powerful drive motor - digital speed display - automatic feed drilling capacity in steel 32 mm projection 320 mm drilling stroke 160 mm spindle mount mk 4 mk table: 500 x 420 mm column diameter 120 mm speed 85 - 1800 rpm feed rates 0.1 - 0.2 - 0.3 mm / rev total power requirement 0.85 / 1.5 kw machine weight approx. 500 kg. dimension l-b-h 965 x 515 x 1920 mm WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 65 X 515 X 1920 MM
DESCRIPTION: HIGH QUALITY DRILLING MACHINE FOR INDUSTRIAL USE. THE MACHINE IS ALSO SUITABLE FOR MULTI-STAGE OPERATION. - THREAD CUTTING DEVICE - PRECISELY ADJUSTABLE DRILLING DEPTH STOP - VIA RACK AND HAND CRANK - HEIGHT-ADJUSTABLE WORK TABLE - BASE PLATE WITH T-SLOTS - HIGH CONCENTRICITY ACCURACY LESS THAN 0.02 MM - ROBUST, POWERFUL DRIVE MOTOR - DIGITAL SPEED DISPLAY - AUTOMATIC FEED DRILLING CAPACITY IN STEEL 32 MM PROJECTION 320 MM DRILLING STROKE 160 MM SPINDLE MOUNT MK 4 MK TABLE: 500 X 420 MM COLUMN DIAMETER 120 MM SPEED 85 - 1800 RPM FEED RATES 0.1 - 0.2 - 0.3 MM / REV TOTAL POWER REQUIREMENT 0.85 / 1.5 KW MACHINE WEIGHT APPROX. 500 KG. DIMENSION L-B-H 965 X 515 X 1920 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 26.500 €
Ubicación: Land-control: heidenhein tnc 426
spindle cooling
ikz with reprocessing on band filter
table dimensions: 1450 x 610 mm travel: x: 1270 mm y: 600 mm z: 760 mm spindle speed: 0-6000 rpm. 
high speed spindle 30,000 rpm for three-dimensional milling,.
spindle collet cone: sk50 tool changer positions: 2 x 16 motor power: 38 kw machine dimensions: l 3250 with a chip conveyor 4400 mm
t 2300 mm, 3200 mm machine weight: 8000 kg
coolant system
electronic handwheel
chip conveyor
machine runtime 23145 h
on-time 46620 h CONTROL: HEIDENHEIN TNC 426 SPINDLE COOLING IKZ WITH REPROCESSING ON BAND FILTER TABLE DIMENSIONS: 1450 X 610 MM TRAVEL: X: 1270 MM Y: 600 MM Z: 760 MM SPINDLE SPEED: 0-6000 RPM. HIGH SPEED SPINDLE 30,000 RPM FOR THREE-DIMENSIONAL MILLING,. SPINDLE COLLET CONE: SK50 TOOL CHANGER POSITIONS: 2 X 16 MOTOR POWER: 38 KW MACHINE DIMENSIONS: L 3250 WITH A CHIP CONVEYOR 4400 MM T 2300 MM, 3200 MM MACHINE WEIGHT: 8000 KG COOLANT SYSTEM ELECTRONIC HANDWHEEL CHIP CONVEYOR MACHINE RUNTIME 23145 H ON-TIME 46620 H
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 3.600 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1100 x 600 x 2350 mm<br/>description: high-quality stand drill for industrial use. the machine is also suitable for multi-shift operation. ? machine base for clamping high workpieces ? digital depth gauge ? gearbox swivels 180 ° ? silent running through hardened and ground gears in oil bath ? tapping function ? electromagnetic clutch for drill feed ? automatic feed ? electric drive for table height adjustment drilling capacity in steel (diameter) 40 mm projection 370 mm drilling stroke 200 mm spindle taper mk 4 mk table: 580 x 460 mm column diameter 160 mm speed 52-1400 u / min feed 0,1 - 0,2 - 0.3 - 0 mm / rev total power requirement 1,5 kw machine weight 700 kg. dimensions l b h 1.1 x 0.6 x 2.35 WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 600 X 2350 MM
DESCRIPTION: HIGH-QUALITY STAND DRILL FOR INDUSTRIAL USE. THE MACHINE IS ALSO SUITABLE FOR MULTI-SHIFT OPERATION. ? MACHINE BASE FOR CLAMPING HIGH WORKPIECES ? DIGITAL DEPTH GAUGE ? GEARBOX SWIVELS 180 ° ? SILENT RUNNING THROUGH HARDENED AND GROUND GEARS IN OIL BATH ? TAPPING FUNCTION ? ELECTROMAGNETIC CLUTCH FOR DRILL FEED ? AUTOMATIC FEED ? ELECTRIC DRIVE FOR TABLE HEIGHT ADJUSTMENT DRILLING CAPACITY IN STEEL (DIAMETER) 40 MM PROJECTION 370 MM DRILLING STROKE 200 MM SPINDLE TAPER MK 4 MK TABLE: 580 X 460 MM COLUMN DIAMETER 160 MM SPEED 52-1400 U / MIN FEED 0,1 - 0,2 - 0.3 - 0 MM / REV TOTAL POWER REQUIREMENT 1,5 KW MACHINE WEIGHT 700 KG. DIMENSIONS L B H 1.1 X 0.6 X 2.35
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fast, high-precision, electric press brake
======
demonstration machine / exhibition machine
======
press force of 25t
bending length 850mm
ewixcxxh
cnc control delem da52
controlled x r axes
mechanical quick clamping amada above
1v table for einsteckmatritzen 13x22mm
ce by lazersafe lzs-004 hs

comes with warranty, installation, training FAST, HIGH-PRECISION, ELECTRIC PRESS BRAKE ====== DEMONSTRATION MACHINE / EXHIBITION MACHINE ====== PRESS FORCE OF 25T BENDING LENGTH 850MM EWIXCXXH CNC CONTROL DELEM DA52 CONTROLLED X R AXES MECHANICAL QUICK CLAMPING AMADA ABOVE 1V TABLE FOR EINSTECKMATRITZEN 13X22MM CE BY LAZERSAFE LZS-004 HS COMES WITH WARRANTY, INSTALLATION, TRAINING
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: boere , type: bks 900 / bbbg20/2, year: 1985 / 1991, monting of the machine: walze schuh + walze/schuh/bürste, double sided sanding line: yes, sanding width mm: 900, sanding hight mm: 150, number of sanding belts: 4, continous adjustable feeding speed m/min: 5 - 25, rubber roller: yes, shoe unit: yes, shoe unit: yes, schleifbänder unten: 2, brushing unit: yes, year :1985 / 1991 MANUFACTURER: BOERE , TYPE: BKS 900 / BBBG20/2, YEAR: 1985 / 1991, MONTING OF THE MACHINE: WALZE SCHUH + WALZE/SCHUH/B&UUML;RSTE, DOUBLE SIDED SANDING LINE: YES, SANDING WIDTH MM: 900, SANDING HIGHT MM: 150, NUMBER OF SANDING BELTS: 4, CONTINOUS ADJUSTABLE FEEDING SPEED M/MIN: 5 - 25, RUBBER ROLLER: YES, SHOE UNIT: YES, SHOE UNIT: YES, SCHLEIFB&AUML;NDER UNTEN: 2, BRUSHING UNIT: YES, YEAR :1985 / 1991
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-vertical machining center
manufacturer: haas
type: vf-2 super speed
year of construction: 2006
cnc control

traverse paths: x/y/z = 800 x 500 x 500 mm
spindle speed: 12.000 rpm
tool changer: 24 x
 VERTICAL MACHINING CENTER MANUFACTURER: HAAS TYPE: VF-2 SUPER SPEED YEAR OF CONSTRUCTION: 2006 CNC CONTROL TRAVERSE PATHS: X/Y/Z = 800 X 500 X 500 MM SPINDLE SPEED: 12.000 RPM TOOL CHANGER: 24 X
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: roc 2, year: 1994, work piece width min-max mm: 1300, work piece cleaning: yes, work piece detection: yes, conveyour system: band, spraying stations: 2 x 2, farbkreise: 2, schnellwechselsystem : yes, laquer recharging: yes, transportsystem band: yes, year :1994 MANUFACTURER: CEFLA, TYPE: ROC 2, YEAR: 1994, WORK PIECE WIDTH MIN-MAX MM: 1300, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, SPRAYING STATIONS: 2 X 2, FARBKREISE: 2, SCHNELLWECHSELSYSTEM : YES, LAQUER RECHARGING: YES, TRANSPORTSYSTEM BAND: YES, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350... mm 
opening storke: 425 mm 
max.daylight: 1200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350... MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.450 €
Ubicación: Land-weight approx.: 175 kg<br/>dimensions (l x w x h) approx.: 400 x 700 x 1100 mm<br/>description: table boring machine: - very stable gray cast iron construction - height-adjustable machine head - 6 speed settings - machine base with t-slots and surrounding coolant channel scope of delivery the price includes: drill chuck holder, tooth chuck drill chuck. optional accessories: illustrated substructure drilling capacity in steel 25 mm projection 240 mm drilling stroke 110 mm speed 125 - 2850 rpm table 310 x 320 mm distance between drill head and max. 650 mm total power requirement 0.75 / 400 kw / volt machine weight approx. 0.175 t dimensions l x w x h 0.95x0.8x1.75m WEIGHT APPROX.: 175 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 700 X 1100 MM
DESCRIPTION: TABLE BORING MACHINE: - VERY STABLE GRAY CAST IRON CONSTRUCTION - HEIGHT-ADJUSTABLE MACHINE HEAD - 6 SPEED SETTINGS - MACHINE BASE WITH T-SLOTS AND SURROUNDING COOLANT CHANNEL SCOPE OF DELIVERY THE PRICE INCLUDES: DRILL CHUCK HOLDER, TOOTH CHUCK DRILL CHUCK. OPTIONAL ACCESSORIES: ILLUSTRATED SUBSTRUCTURE DRILLING CAPACITY IN STEEL 25 MM PROJECTION 240 MM DRILLING STROKE 110 MM SPEED 125 - 2850 RPM TABLE 310 X 320 MM DISTANCE BETWEEN DRILL HEAD AND MAX. 650 MM TOTAL POWER REQUIREMENT 0.75 / 400 KW / VOLT MACHINE WEIGHT APPROX. 0.175 T DIMENSIONS L X W X H 0.95X0.8X1.75M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-battenfeld injection moulding machine tm50 / 210 unilog b4 bj: 2005 clamping force max: 500 kn lights tie bar distance 320 x 320 mm min. height: 250 mm max height: 450 mm gap of max 250 mm maximum distance from plates: 700 mm auger/screw: 30 mm spec. injection pressure: 2042 bar maximum injection weight (ps): 95 g mathematically. displacement: 106 cc screw l/d ratio: 22 caption / lettering: german documentation / manual: german
teletext/screen: german
voltage / voltage: 230/400v, 50 hz painting / painting: standard 9002/5002
hours of operation: approx. 60000 hours
total number of shots: approx. 6800000 shot equipment: bdtvfymfci
06 x 17 euro package comprising unilog b4: 07d00 levelling elements 02 k 02 1 x air valve over time adjustable 01 c 01 1 x core pulling close page nw 6 (s/w valve) 06r01 2 x socket schuko 10 a 06r20 2 x cee socket 16a 03d03 injection, emphasis and pressure controlled by means of servov valv 03 b 03 temperature control of the inlet zone, integrated 00 c 00 mould installation height increased by 100 mm (min and max will be increased to the same level) 06 b 21 interface for robot according to euromap 67 additional converter on euromap 12 06n10 air program incl defined nozzle system pressure (03

1 piece sepro pip 55 mpa-ii p tc sprue picker (robot) pneumatic built: 2005 nominal load: 1 kg of extract stroke of form of: 75 mm vertical stroke: 550 mm based on tm 50/210 unilog b4 BATTENFELD INJECTION MOULDING MACHINE TM50 / 210 UNILOG B4 BJ: 2005 CLAMPING FORCE MAX: 500 KN LIGHTS TIE BAR DISTANCE 320 X 320 MM MIN. HEIGHT: 250 MM MAX HEIGHT: 450 MM GAP OF MAX 250 MM MAXIMUM DISTANCE FROM PLATES: 700 MM AUGER/SCREW: 30 MM SPEC. INJECTION PRESSURE: 2042 BAR MAXIMUM INJECTION WEIGHT (PS): 95 G MATHEMATICALLY. DISPLACEMENT: 106 CC SCREW L/D RATIO: 22 CAPTION / LETTERING: GERMAN DOCUMENTATION / MANUAL: GERMAN TELETEXT/SCREEN: GERMAN VOLTAGE / VOLTAGE: 230/400V, 50 HZ PAINTING / PAINTING: STANDARD 9002/5002 HOURS OF OPERATION: APPROX. 60000 HOURS TOTAL NUMBER OF SHOTS: APPROX. 6800000 SHOT EQUIPMENT: BDTVFYMFCI 06 X 17 EURO PACKAGE COMPRISING UNILOG B4: 07D00 LEVELLING ELEMENTS 02 K 02 1 X AIR VALVE OVER TIME ADJUSTABLE 01 C 01 1 X CORE PULLING CLOSE PAGE NW 6 (S/W VALVE) 06R01 2 X SOCKET SCHUKO 10 A 06R20 2 X CEE SOCKET 16A 03D03 INJECTION, EMPHASIS AND PRESSURE CONTROLLED BY MEANS OF SERVOV VALV 03 B 03 TEMPERATURE CONTROL OF THE INLET ZONE, INTEGRATED 00 C 00 MOULD INSTALLATION HEIGHT INCREASED BY 100 MM (MIN AND MAX WILL BE INCREASED TO THE SAME LEVEL) 06 B 21 INTERFACE FOR ROBOT ACCORDING TO EUROMAP 67 ADDITIONAL CONVERTER ON EUROMAP 12 06N10 AIR PROGRAM INCL DEFINED NOZZLE SYSTEM PRESSURE (03 1 PIECE SEPRO PIP 55 MPA-II P TC SPRUE PICKER (ROBOT) PNEUMATIC BUILT: 2005 NOMINAL LOAD: 1 KG OF EXTRACT STROKE OF FORM OF: 75 MM VERTICAL STROKE: 550 MM BASED ON TM 50/210 UNILOG B4
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1100 x 600 x 2350 mm<br/>description: high quality floor drilling machine for industrial use. ? machine base for clamping high workpieces ? 2-stage motor with 18 switchable speeds ? drilling table with 18 mm t-slots ? simple and fast speed change through shift lever ? hardened, ground gear wheels running in the oil bath ? thread cutting device ? electronic coupling for drilling feed ? cooling system ? working lights ? rotating table with scale drilling capacity in steel (diameter) 40 mm projection 350 mm drilling stroke 180 mm spindle mount mk 4 mk table: 560 x 560 mm column diameter 150 mm speed 50 - 1450 rpm feed rates 0.1 - 0.2 mm / rev total power requirement 1.5 kw weight of machine approx. 700 kg. dimension l-b-h 1.1 x 0.6 x 2.35 mm WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 600 X 2350 MM
DESCRIPTION: HIGH QUALITY FLOOR DRILLING MACHINE FOR INDUSTRIAL USE. ? MACHINE BASE FOR CLAMPING HIGH WORKPIECES ? 2-STAGE MOTOR WITH 18 SWITCHABLE SPEEDS ? DRILLING TABLE WITH 18 MM T-SLOTS ? SIMPLE AND FAST SPEED CHANGE THROUGH SHIFT LEVER ? HARDENED, GROUND GEAR WHEELS RUNNING IN THE OIL BATH ? THREAD CUTTING DEVICE ? ELECTRONIC COUPLING FOR DRILLING FEED ? COOLING SYSTEM ? WORKING LIGHTS ? ROTATING TABLE WITH SCALE DRILLING CAPACITY IN STEEL (DIAMETER) 40 MM PROJECTION 350 MM DRILLING STROKE 180 MM SPINDLE MOUNT MK 4 MK TABLE: 560 X 560 MM COLUMN DIAMETER 150 MM SPEED 50 - 1450 RPM FEED RATES 0.1 - 0.2 MM / REV TOTAL POWER REQUIREMENT 1.5 KW WEIGHT OF MACHINE APPROX. 700 KG. DIMENSION L-B-H 1.1 X 0.6 X 2.35 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine battenfeld tm50 / 210 unilof b4
year: 2005 clamping force max: 500 kn lights tie bar distance 320 x 320 mm min. height: 250 mm max height: 450 mm gap of max 250 mm maximum distance from plates: 700 mm auger/screw: 30 mm
spec. injection pressure: 2042 bar maximum injection weight (ps): 95 g mathematically. displacement: 106 cc screw l/d ratio: 22 caption / lettering: german documentation / manual: german
teletext/screen: german voltage / voltage: 230/400v, 50 hz painting / painting: standard 9002/5002 hours of operation: approx. 60690 h
mui3kc
total number of shots: approx. 6745900 shot equipment: 06 x 17 consisting of euro package unilog b4: 07d00 levelling elements 02 k 02 1 x air valve over time adjustable 01 c 01 1 x core pulling close page nw 6 (s/w valve) 06r01 2 x socket schuko 10 a 06r20 2 x cee socket 16a 03d03 einspri records, emphasis and pressure controlled via servo-valve 03 b 03 temperature control of the inlet zone, integrated 00 c 00 mould installation height increased by 100 mm (min and max will be increased to the same level) 06 b 21 interface for robot according to euromap 67 additionally converter on euromap 12 06n10 air program incl defined nozzle system pressure (03e40) 1 piece sepro pip 55 mpa-ii p tc sprue picker (robot) pneumatic bj: 2005 nominal load: 1 kg of extract stroke of form of: 75 mm vertical stroke: 550 mm delivery: based on tm 50/210 unilog b4 INJECTION MOLDING MACHINE BATTENFELD TM50 / 210 UNILOF B4 YEAR: 2005 CLAMPING FORCE MAX: 500 KN LIGHTS TIE BAR DISTANCE 320 X 320 MM MIN. HEIGHT: 250 MM MAX HEIGHT: 450 MM GAP OF MAX 250 MM MAXIMUM DISTANCE FROM PLATES: 700 MM AUGER/SCREW: 30 MM SPEC. INJECTION PRESSURE: 2042 BAR MAXIMUM INJECTION WEIGHT (PS): 95 G MATHEMATICALLY. DISPLACEMENT: 106 CC SCREW L/D RATIO: 22 CAPTION / LETTERING: GERMAN DOCUMENTATION / MANUAL: GERMAN TELETEXT/SCREEN: GERMAN VOLTAGE / VOLTAGE: 230/400V, 50 HZ PAINTING / PAINTING: STANDARD 9002/5002 HOURS OF OPERATION: APPROX. 60690 H MUI3KC TOTAL NUMBER OF SHOTS: APPROX. 6745900 SHOT EQUIPMENT: 06 X 17 CONSISTING OF EURO PACKAGE UNILOG B4: 07D00 LEVELLING ELEMENTS 02 K 02 1 X AIR VALVE OVER TIME ADJUSTABLE 01 C 01 1 X CORE PULLING CLOSE PAGE NW 6 (S/W VALVE) 06R01 2 X SOCKET SCHUKO 10 A 06R20 2 X CEE SOCKET 16A 03D03 EINSPRI RECORDS, EMPHASIS AND PRESSURE CONTROLLED VIA SERVO-VALVE 03 B 03 TEMPERATURE CONTROL OF THE INLET ZONE, INTEGRATED 00 C 00 MOULD INSTALLATION HEIGHT INCREASED BY 100 MM (MIN AND MAX WILL BE INCREASED TO THE SAME LEVEL) 06 B 21 INTERFACE FOR ROBOT ACCORDING TO EUROMAP 67 ADDITIONALLY CONVERTER ON EUROMAP 12 06N10 AIR PROGRAM INCL DEFINED NOZZLE SYSTEM PRESSURE (03E40) 1 PIECE SEPRO PIP 55 MPA-II P TC SPRUE PICKER (ROBOT) PNEUMATIC BJ: 2005 NOMINAL LOAD: 1 KG OF EXTRACT STROKE OF FORM OF: 75 MM VERTICAL STROKE: 550 MM DELIVERY: BASED ON TM 50/210 UNILOG B4
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-weight approx.: 540 kg<br/>dimensions (l x w x h) approx.: 800 x 550 x 2200 mm<br/>description: high-quality drill press for industrial use. - 2-speed motor with 12 switchable speeds - gear head 180 ° swiveling - thread cutting device - automatic feed - coolant pump - halogen operating light drilling capacity in steel 32 mm throat 320 mm drilling stroke 155 mm spindle mount mk 4 table: 500 x 420 mm column diameter 120 mm speed 125 - 3030 rpm feed rates 0.1 - 0.2 - 0.3 mm / rev total power requirement 1.2 kw machine weight approx. 540 kg. dimension l-b-h 0.8 x 0.55 x 2.2 mm WEIGHT APPROX.: 540 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 550 X 2200 MM
DESCRIPTION: HIGH-QUALITY DRILL PRESS FOR INDUSTRIAL USE. - 2-SPEED MOTOR WITH 12 SWITCHABLE SPEEDS - GEAR HEAD 180 ° SWIVELING - THREAD CUTTING DEVICE - AUTOMATIC FEED - COOLANT PUMP - HALOGEN OPERATING LIGHT DRILLING CAPACITY IN STEEL 32 MM THROAT 320 MM DRILLING STROKE 155 MM SPINDLE MOUNT MK 4 TABLE: 500 X 420 MM COLUMN DIAMETER 120 MM SPEED 125 - 3030 RPM FEED RATES 0.1 - 0.2 - 0.3 MM / REV TOTAL POWER REQUIREMENT 1.2 KW MACHINE WEIGHT APPROX. 540 KG. DIMENSION L-B-H 0.8 X 0.55 X 2.2 MM
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)