36 ofertas

Año de construcción: usado
Ubicación: Land-battenfeld 160 ton. injection molding

type tm 1600/750
construction year 2001
dbb 520×520mm.
moving plane stroke 480
min / max mould thickness 225-550
2 jack
n.1 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment BATTENFELD 160 TON. INJECTION MOLDING TYPE TM 1600/750 CONSTRUCTION YEAR 2001 DBB 520×520MM. MOVING PLANE STROKE 480 MIN / MAX MOULD THICKNESS 225-550 2 JACK N.1 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-max. closing force: 500kn, distance between tie bars: 320x320mm, installation height: 250-450mm, max. opening stroke: 250mm, max. plate distance: 700mm, screw diameter: 30mm, specific injection pressure: 2042bar, max. injection weight: 95g, stroke volume: 106cm³, operational hours: ca. 60.000h, also available is one robot sepro pip 55 mpa-ii p tc: load: 3kg. MAX. CLOSING FORCE: 500KN, DISTANCE BETWEEN TIE BARS: 320X320MM, INSTALLATION HEIGHT: 250-450MM, MAX. OPENING STROKE: 250MM, MAX. PLATE DISTANCE: 700MM, SCREW DIAMETER: 30MM, SPECIFIC INJECTION PRESSURE: 2042BAR, MAX. INJECTION WEIGHT: 95G, STROKE VOLUME: 106CM³, OPERATIONAL HOURS: CA. 60.000H, ALSO AVAILABLE IS ONE ROBOT SEPRO PIP 55 MPA-II P TC: LOAD: 3KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-battenfeld injection moulding machine tm50 / 210 unilog b4 bj: 2005 clamping force max: 500 kn lights tie bar distance 320 x 320 mm min. height: 250 mm max height: 450 mm gap of max 250 mm maximum distance from plates: 700 mm auger/screw: 30 mm spec. injection pressure: 2042 bar maximum injection weight (ps): 95 g mathematically. displacement: 106 cc screw l/d ratio: 22 caption / lettering: german documentation / manual: german
teletext/screen: german
voltage / voltage: 230/400v, 50 hz painting / painting: standard 9002/5002
hours of operation: approx. 60000 hours
total number of shots: approx. 6800000 shot equipment: bdtvfymfci
06 x 17 euro package comprising unilog b4: 07d00 levelling elements 02 k 02 1 x air valve over time adjustable 01 c 01 1 x core pulling close page nw 6 (s/w valve) 06r01 2 x socket schuko 10 a 06r20 2 x cee socket 16a 03d03 injection, emphasis and pressure controlled by means of servov valv 03 b 03 temperature control of the inlet zone, integrated 00 c 00 mould installation height increased by 100 mm (min and max will be increased to the same level) 06 b 21 interface for robot according to euromap 67 additional converter on euromap 12 06n10 air program incl defined nozzle system pressure (03

1 piece sepro pip 55 mpa-ii p tc sprue picker (robot) pneumatic built: 2005 nominal load: 1 kg of extract stroke of form of: 75 mm vertical stroke: 550 mm based on tm 50/210 unilog b4 BATTENFELD INJECTION MOULDING MACHINE TM50 / 210 UNILOG B4 BJ: 2005 CLAMPING FORCE MAX: 500 KN LIGHTS TIE BAR DISTANCE 320 X 320 MM MIN. HEIGHT: 250 MM MAX HEIGHT: 450 MM GAP OF MAX 250 MM MAXIMUM DISTANCE FROM PLATES: 700 MM AUGER/SCREW: 30 MM SPEC. INJECTION PRESSURE: 2042 BAR MAXIMUM INJECTION WEIGHT (PS): 95 G MATHEMATICALLY. DISPLACEMENT: 106 CC SCREW L/D RATIO: 22 CAPTION / LETTERING: GERMAN DOCUMENTATION / MANUAL: GERMAN TELETEXT/SCREEN: GERMAN VOLTAGE / VOLTAGE: 230/400V, 50 HZ PAINTING / PAINTING: STANDARD 9002/5002 HOURS OF OPERATION: APPROX. 60000 HOURS TOTAL NUMBER OF SHOTS: APPROX. 6800000 SHOT EQUIPMENT: BDTVFYMFCI 06 X 17 EURO PACKAGE COMPRISING UNILOG B4: 07D00 LEVELLING ELEMENTS 02 K 02 1 X AIR VALVE OVER TIME ADJUSTABLE 01 C 01 1 X CORE PULLING CLOSE PAGE NW 6 (S/W VALVE) 06R01 2 X SOCKET SCHUKO 10 A 06R20 2 X CEE SOCKET 16A 03D03 INJECTION, EMPHASIS AND PRESSURE CONTROLLED BY MEANS OF SERVOV VALV 03 B 03 TEMPERATURE CONTROL OF THE INLET ZONE, INTEGRATED 00 C 00 MOULD INSTALLATION HEIGHT INCREASED BY 100 MM (MIN AND MAX WILL BE INCREASED TO THE SAME LEVEL) 06 B 21 INTERFACE FOR ROBOT ACCORDING TO EUROMAP 67 ADDITIONAL CONVERTER ON EUROMAP 12 06N10 AIR PROGRAM INCL DEFINED NOZZLE SYSTEM PRESSURE (03 1 PIECE SEPRO PIP 55 MPA-II P TC SPRUE PICKER (ROBOT) PNEUMATIC BUILT: 2005 NOMINAL LOAD: 1 KG OF EXTRACT STROKE OF FORM OF: 75 MM VERTICAL STROKE: 550 MM BASED ON TM 50/210 UNILOG B4
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine battenfeld tm50 / 210 unilof b4
year: 2005 clamping force max: 500 kn lights tie bar distance 320 x 320 mm min. height: 250 mm max height: 450 mm gap of max 250 mm maximum distance from plates: 700 mm auger/screw: 30 mm
spec. injection pressure: 2042 bar maximum injection weight (ps): 95 g mathematically. displacement: 106 cc screw l/d ratio: 22 caption / lettering: german documentation / manual: german
teletext/screen: german voltage / voltage: 230/400v, 50 hz painting / painting: standard 9002/5002 hours of operation: approx. 60690 h
mui3kc
total number of shots: approx. 6745900 shot equipment: 06 x 17 consisting of euro package unilog b4: 07d00 levelling elements 02 k 02 1 x air valve over time adjustable 01 c 01 1 x core pulling close page nw 6 (s/w valve) 06r01 2 x socket schuko 10 a 06r20 2 x cee socket 16a 03d03 einspri records, emphasis and pressure controlled via servo-valve 03 b 03 temperature control of the inlet zone, integrated 00 c 00 mould installation height increased by 100 mm (min and max will be increased to the same level) 06 b 21 interface for robot according to euromap 67 additionally converter on euromap 12 06n10 air program incl defined nozzle system pressure (03e40) 1 piece sepro pip 55 mpa-ii p tc sprue picker (robot) pneumatic bj: 2005 nominal load: 1 kg of extract stroke of form of: 75 mm vertical stroke: 550 mm delivery: based on tm 50/210 unilog b4 INJECTION MOLDING MACHINE BATTENFELD TM50 / 210 UNILOF B4 YEAR: 2005 CLAMPING FORCE MAX: 500 KN LIGHTS TIE BAR DISTANCE 320 X 320 MM MIN. HEIGHT: 250 MM MAX HEIGHT: 450 MM GAP OF MAX 250 MM MAXIMUM DISTANCE FROM PLATES: 700 MM AUGER/SCREW: 30 MM SPEC. INJECTION PRESSURE: 2042 BAR MAXIMUM INJECTION WEIGHT (PS): 95 G MATHEMATICALLY. DISPLACEMENT: 106 CC SCREW L/D RATIO: 22 CAPTION / LETTERING: GERMAN DOCUMENTATION / MANUAL: GERMAN TELETEXT/SCREEN: GERMAN VOLTAGE / VOLTAGE: 230/400V, 50 HZ PAINTING / PAINTING: STANDARD 9002/5002 HOURS OF OPERATION: APPROX. 60690 H MUI3KC TOTAL NUMBER OF SHOTS: APPROX. 6745900 SHOT EQUIPMENT: 06 X 17 CONSISTING OF EURO PACKAGE UNILOG B4: 07D00 LEVELLING ELEMENTS 02 K 02 1 X AIR VALVE OVER TIME ADJUSTABLE 01 C 01 1 X CORE PULLING CLOSE PAGE NW 6 (S/W VALVE) 06R01 2 X SOCKET SCHUKO 10 A 06R20 2 X CEE SOCKET 16A 03D03 EINSPRI RECORDS, EMPHASIS AND PRESSURE CONTROLLED VIA SERVO-VALVE 03 B 03 TEMPERATURE CONTROL OF THE INLET ZONE, INTEGRATED 00 C 00 MOULD INSTALLATION HEIGHT INCREASED BY 100 MM (MIN AND MAX WILL BE INCREASED TO THE SAME LEVEL) 06 B 21 INTERFACE FOR ROBOT ACCORDING TO EUROMAP 67 ADDITIONALLY CONVERTER ON EUROMAP 12 06N10 AIR PROGRAM INCL DEFINED NOZZLE SYSTEM PRESSURE (03E40) 1 PIECE SEPRO PIP 55 MPA-II P TC SPRUE PICKER (ROBOT) PNEUMATIC BJ: 2005 NOMINAL LOAD: 1 KG OF EXTRACT STROKE OF FORM OF: 75 MM VERTICAL STROKE: 550 MM DELIVERY: BASED ON TM 50/210 UNILOG B4
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-second-hand machine bj. 2000 (inv. 2298)

hours of operation: 81310
machine cycles: 5603669
control: unilog b4
performance data: 100 t

clamping force: 1000 kn
holmabstand(h x v): 320 x 320 mm
opening stroke: 600 mm mould installation height: 150 mm
maximum tool height: 350 mm

screw diameter: 25 mm l/d ratio: 22
suitable for the processing of: pa spec. injection pressure: 2940 bar
maximum shot weight: 43 g power supply: 400v 34a 50 hz
capacity: 40, 8kw
heating capacity: 6, 8kw
machine size (lxwxh): 4, 20 m x 1.26 x 1.85 m
machine weight: 3600 kg SECOND-HAND MACHINE BJ. 2000 (INV. 2298) HOURS OF OPERATION: 81310 MACHINE CYCLES: 5603669 CONTROL: UNILOG B4 PERFORMANCE DATA: 100 T CLAMPING FORCE: 1000 KN HOLMABSTAND(H X V): 320 X 320 MM OPENING STROKE: 600 MM MOULD INSTALLATION HEIGHT: 150 MM MAXIMUM TOOL HEIGHT: 350 MM SCREW DIAMETER: 25 MM L/D RATIO: 22 SUITABLE FOR THE PROCESSING OF: PA SPEC. INJECTION PRESSURE: 2940 BAR MAXIMUM SHOT WEIGHT: 43 G POWER SUPPLY: 400V 34A 50 HZ CAPACITY: 40, 8KW HEATING CAPACITY: 6, 8KW MACHINE SIZE (LXWXH): 4, 20 M X 1.26 X 1.85 M MACHINE WEIGHT: 3600 KG
Vendedor: WAGO Kontakttechnik GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-machine specification

year: 2000 
control unit: unilog b2 

injection unit: .../210
screw diameter: 30 mm 
injection pressure: 2042 bar 
injection volume: 106 ccm 
shot capacity: 95 g 

clamping unit: 500/...
clamping force: 50 t 
platen size: 490 x 490 mm 
distance between tie bars: 320 x 320 mm 
mould height: 150... mm 
opening storke: 250 mm 
max.daylight: 600 mm 
ejector stroke: 100 mm 
cylinder heating power: 7,7 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,1 x 0,95 x 1,5 m 
weight: 2500 kg 

equipment:
- interface as per euromap 12
- 1 x core pull
- 1 x pneumatic valve    MACHINE SPECIFICATION YEAR: 2000 CONTROL UNIT: UNILOG B2 INJECTION UNIT: .../210 SCREW DIAMETER: 30 MM INJECTION PRESSURE: 2042 BAR INJECTION VOLUME: 106 CCM SHOT CAPACITY: 95 G CLAMPING UNIT: 500/... CLAMPING FORCE: 50 T PLATEN SIZE: 490 X 490 MM DISTANCE BETWEEN TIE BARS: 320 X 320 MM MOULD HEIGHT: 150... MM OPENING STORKE: 250 MM MAX.DAYLIGHT: 600 MM EJECTOR STROKE: 100 MM CYLINDER HEATING POWER: 7,7 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,1 X 0,95 X 1,5 M WEIGHT: 2500 KG EQUIPMENT: - INTERFACE AS PER EUROMAP 12 - 1 X CORE PULL - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-machine specification:

year: 2004 
robot: unirob -a-8-7+7-20 

injection unit: .../1900
screw diameter: 65 mm 
injection pressure: 1777 bar 
injection volume: 1078 ccm 
shot capacity: 981 g 

clamping unit: 3500/...
clamping force: 350 t 
platen size: 1010 x 1010 mm 
distance between tie bars: 710 x 710 mm 
mould height: 300...710 mm 
opening storke: 670 mm 
max.daylight: 1380 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 7,60 x 1,80 x 2,40 m 
weight: 15.300 kg 

equipment:
- 1 x pneumatic valve
- 2 x core pull for closing plate  nw 10
- interface as per euromap 13
- increased oil cooler 
- regulated ejector
- screw extremely wear resistant and corrosion resistant
- interface for robot as per euromap 12
- including robot unirob -a-8-7+7-20 MACHINE SPECIFICATION: YEAR: 2004 ROBOT: UNIROB -A-8-7+7-20 INJECTION UNIT: .../1900 SCREW DIAMETER: 65 MM INJECTION PRESSURE: 1777 BAR INJECTION VOLUME: 1078 CCM SHOT CAPACITY: 981 G CLAMPING UNIT: 3500/... CLAMPING FORCE: 350 T PLATEN SIZE: 1010 X 1010 MM DISTANCE BETWEEN TIE BARS: 710 X 710 MM MOULD HEIGHT: 300...710 MM OPENING STORKE: 670 MM MAX.DAYLIGHT: 1380 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 7,60 X 1,80 X 2,40 M WEIGHT: 15.300 KG EQUIPMENT: - 1 X PNEUMATIC VALVE - 2 X CORE PULL FOR CLOSING PLATE NW 10 - INTERFACE AS PER EUROMAP 13 - INCREASED OIL COOLER - REGULATED EJECTOR - SCREW EXTREMELY WEAR RESISTANT AND CORROSION RESISTANT - INTERFACE FOR ROBOT AS PER EUROMAP 12 - INCLUDING ROBOT UNIROB -A-8-7+7-20
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-battenfeld bskm tm 1000/525 nikeb
year of construction: 2004
our no. m 12
clamping force: 100 t
holm: 65
tie bar distance: 420 x 420
height: 200-450
opening stroke: 380
screw diameter: 40
hours of operation: 50.700 hours 
fully functional BATTENFELD BSKM TM 1000/525 NIKEB YEAR OF CONSTRUCTION: 2004 OUR NO. M 12 CLAMPING FORCE: 100 T HOLM: 65 TIE BAR DISTANCE: 420 X 420 HEIGHT: 200-450 OPENING STROKE: 380 SCREW DIAMETER: 40 HOURS OF OPERATION: 50.700 HOURS FULLY FUNCTIONAL
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-battenfeld tm 750/350 unilog b4
year of construction: 2002
clamping force: 70 t
holm: 60
tie bar distance: 370 x 370
bdqg0zbeqa
height: 200-400
opening stroke: 330
screw diameter: 35
hours of operation: 52.500 hours 
fully functional BATTENFELD TM 750/350 UNILOG B4 YEAR OF CONSTRUCTION: 2002 CLAMPING FORCE: 70 T HOLM: 60 TIE BAR DISTANCE: 370 X 370 BDQG0ZBEQA HEIGHT: 200-400 OPENING STROKE: 330 SCREW DIAMETER: 35 HOURS OF OPERATION: 52.500 HOURS FULLY FUNCTIONAL
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-battenfeld tm 5500/4500
 bj. 2007
approx. 48000 wh
2 x core pulling
1 x lv
2 x event center BATTENFELD TM 5500/4500 BJ. 2007 APPROX. 48000 WH 2 X CORE PULLING 1 X LV 2 X EVENT CENTER
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-closing force: 1000kn, distance between tie-bars: 420x420mm, tool installation height: 200-450mm, plate dimensions: 640x640mm, max. tool weight: 620kg, ejector stroke: 100mm, mold centering diameter: 125mm, opening stroke: 835mm, screw diameter: 40mm, main aggregate injection weight: 228.7ps/g, injection pressure: 2100bar, nozzle diameter: r35mm, weight: 3,9t, available after january 2019.  CLOSING FORCE: 1000KN, DISTANCE BETWEEN TIE-BARS: 420X420MM, TOOL INSTALLATION HEIGHT: 200-450MM, PLATE DIMENSIONS: 640X640MM, MAX. TOOL WEIGHT: 620KG, EJECTOR STROKE: 100MM, MOLD CENTERING DIAMETER: 125MM, OPENING STROKE: 835MM, SCREW DIAMETER: 40MM, MAIN AGGREGATE INJECTION WEIGHT: 228.7PS/G, INJECTION PRESSURE: 2100BAR, NOZZLE DIAMETER: R35MM, WEIGHT: 3,9T, AVAILABLE AFTER JANUARY 2019.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-battenfeld tm 500/210
year of construction: 1999

injection unit:
screw diameter: 35 mm
shot weight: 131 g
injection pressure: 1500 bar
dispensing volume: 144 cc

clamping unit:
clamping force: 50 t
tie bar distance: 320 x 320 mm
the clamping plates size: 490 x 490 mm
ejector: hydraulic
clamping unit: knee lever

control: unilog b2

additional equipment:
hydraulic core pulling x 1
central lubrication system

dimensions:
weight: 2500 kg
length/width/height: 3.51 x 1.18 x 1.63 m

drive:
pump/motor: 11 kw
heating capacity: 10.4 kw
total: 21.4 kw

price: on request
BATTENFELD TM 500/210 YEAR OF CONSTRUCTION: 1999 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 131 G INJECTION PRESSURE: 1500 BAR DISPENSING VOLUME: 144 CC CLAMPING UNIT: CLAMPING FORCE: 50 T TIE BAR DISTANCE: 320 X 320 MM THE CLAMPING PLATES SIZE: 490 X 490 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B2 ADDITIONAL EQUIPMENT: HYDRAULIC CORE PULLING X 1 CENTRAL LUBRICATION SYSTEM DIMENSIONS: WEIGHT: 2500 KG LENGTH/WIDTH/HEIGHT: 3.51 X 1.18 X 1.63 M DRIVE: PUMP/MOTOR: 11 KW HEATING CAPACITY: 10.4 KW TOTAL: 21.4 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tm 500/210
year of manufacture 2002

injection unit:
screw diameter: 35 mm
shot weight: 131 g
injection pressure: 1500 bar
dispensing volume: 144ccm

clamping unit:
clamping force: 50 t
tie bar distance: 320 x 320 mm
the clamping plates size: 490 x 490 mm
ejector: hydraulic
clamping unit: knee lever

control:
unilog b2
additional equipment:
euromap
robot interface
hydraulic core pulling x 1
central lubrication system

dimensions:
weight: 2500 kg
length/width/height: 3.51 x 1, 18 x 1. 63m

drive:
pump/motor: 11 kw
heating capacity: 10.4 kw
cylinder heating: 21.4 kw

price: on request BATTENFELD TM 500/210 YEAR OF MANUFACTURE 2002 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 131 G INJECTION PRESSURE: 1500 BAR DISPENSING VOLUME: 144CCM CLAMPING UNIT: CLAMPING FORCE: 50 T TIE BAR DISTANCE: 320 X 320 MM THE CLAMPING PLATES SIZE: 490 X 490 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B2 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE HYDRAULIC CORE PULLING X 1 CENTRAL LUBRICATION SYSTEM DIMENSIONS: WEIGHT: 2500 KG LENGTH/WIDTH/HEIGHT: 3.51 X 1, 18 X 1. 63M DRIVE: PUMP/MOTOR: 11 KW HEATING CAPACITY: 10.4 KW CYLINDER HEATING: 21.4 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tm 750/210 with robot battenfeld p5
year of construction: 2003

injection unit:
screw diameter: 30 mm
shot weight: 96.5 g
injection pressure: 2042 bar
dispensing volume: 106 cc

clamping unit:
clamping force: 75 t
tie bar distance: 370 x 370 mm
clamping plate sizes: 590 x 590 mm
ejector: hydraulic
clamping unit: knee lever

control:
unilog b4

additional equipment:
hours of operation: 39.749
euromap
robot interface
hydraulic core pulling x 1
injection unit cured - bi
central lubrication system
proportional valve on two injection units - the precise injection
robot battenfeld p5/26797
year of manufacture: 2007
weight: 200 kg

dimensions:
weight: 3000 kg
length/width/height: 3.87 x 1.33 x 1.78 m

drive:
pump/motor: 11 kw
heating capacity: 7.7 kw
total: 18.7 kw

price: on request BATTENFELD TM 750/210 WITH ROBOT BATTENFELD P5 YEAR OF CONSTRUCTION: 2003 INJECTION UNIT: SCREW DIAMETER: 30 MM SHOT WEIGHT: 96.5 G INJECTION PRESSURE: 2042 BAR DISPENSING VOLUME: 106 CC CLAMPING UNIT: CLAMPING FORCE: 75 T TIE BAR DISTANCE: 370 X 370 MM CLAMPING PLATE SIZES: 590 X 590 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B4 ADDITIONAL EQUIPMENT: HOURS OF OPERATION: 39.749 EUROMAP ROBOT INTERFACE HYDRAULIC CORE PULLING X 1 INJECTION UNIT CURED - BI CENTRAL LUBRICATION SYSTEM PROPORTIONAL VALVE ON TWO INJECTION UNITS - THE PRECISE INJECTION ROBOT BATTENFELD P5/26797 YEAR OF MANUFACTURE: 2007 WEIGHT: 200 KG DIMENSIONS: WEIGHT: 3000 KG LENGTH/WIDTH/HEIGHT: 3.87 X 1.33 X 1.78 M DRIVE: PUMP/MOTOR: 11 KW HEATING CAPACITY: 7.7 KW TOTAL: 18.7 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tm 1000/350 / machine in excellent technical condition
year of construction: 2002

injection unit:
screw diameter: 35 mm
shot weight: 153.8 g
injection pressure: 2083 bar
dosing volume: 169 ccm

clamping unit:
clamping force: 100 t
tie bar distance: 420 x 420 mm
clamping plate sizes: 640 x 640 mm
ejector: hydraulic
clamping unit: knee lever

control: unilog b2

additional equipment:
euromap
robot interface
core move x 1
central lubrication system
auto tool installation height

dimensions:
weight: 3600 kg
length/width/height: 4.18 x 1.33 x 1.86 m

drive:
pump/motor: 15 kw
heating capacity: 10.4 kw
total capacity: 25.4 kw

price: on request BATTENFELD TM 1000/350 / MACHINE IN EXCELLENT TECHNICAL CONDITION YEAR OF CONSTRUCTION: 2002 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 153.8 G INJECTION PRESSURE: 2083 BAR DOSING VOLUME: 169 CCM CLAMPING UNIT: CLAMPING FORCE: 100 T TIE BAR DISTANCE: 420 X 420 MM CLAMPING PLATE SIZES: 640 X 640 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B2 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CORE MOVE X 1 CENTRAL LUBRICATION SYSTEM AUTO TOOL INSTALLATION HEIGHT DIMENSIONS: WEIGHT: 3600 KG LENGTH/WIDTH/HEIGHT: 4.18 X 1.33 X 1.86 M DRIVE: PUMP/MOTOR: 15 KW HEATING CAPACITY: 10.4 KW TOTAL CAPACITY: 25.4 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tm 1300/525 / hours: 31.267
year of construction: 2002

injection unit:
screw diameter: 45 mm
shot weight: 289 g
injection pressure: 1659 bar
metering capacity: 318 cc

clamping unit:
clamping force: 130 t
tie bar distance: 470 x 470 mm
size of the clamping plates: 670 x 670 mm
ejector: hydraulic
clamping unit: knee lever

control: unilog b4

additional equipment:
hydraulic core pulling x 2
proportional valve on the injection unit - precise injection
central lubrication system

dimensions:
weight: 4800 kg
length/width/height: 4.65 x 1.43 x 2.09 m

drive:
pump/motor: 18.5 kw
heating power: 14 kw
total power: kw 32.5

price: on request
BATTENFELD TM 1300/525 / HOURS: 31.267 YEAR OF CONSTRUCTION: 2002 INJECTION UNIT: SCREW DIAMETER: 45 MM SHOT WEIGHT: 289 G INJECTION PRESSURE: 1659 BAR METERING CAPACITY: 318 CC CLAMPING UNIT: CLAMPING FORCE: 130 T TIE BAR DISTANCE: 470 X 470 MM SIZE OF THE CLAMPING PLATES: 670 X 670 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B4 ADDITIONAL EQUIPMENT: HYDRAULIC CORE PULLING X 2 PROPORTIONAL VALVE ON THE INJECTION UNIT - PRECISE INJECTION CENTRAL LUBRICATION SYSTEM DIMENSIONS: WEIGHT: 4800 KG LENGTH/WIDTH/HEIGHT: 4.65 X 1.43 X 2.09 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING POWER: 14 KW TOTAL POWER: KW 32.5 PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tm 240/1330 with robot apex sc950w / hours: 9.125
construction year: 2014

injection unit:
screw diameter: 55 mm
shot weight: 594.2 g
injection pressure: 2041 bar
dispensing volume: 653 cc

clamping unit:
clamping force: 240 t
tie bar distance: 570 x 570 mm
size of the clamping plates: 820 x 930 mm
ejector: hydraulic
clamping unit: knee lever

control:
unilog b6p - control panel (touch screen)

additional equipment:
euromap 67
robot interface
hydraulic core pulling x 1
air valve x 2
control hot-channel x 6
injection unit cured - bi
central lubrication system
parallel movements
2 x battery with compressed nitrogen (additional charge, which is used for the fast work)
 

5-axis robot, a and b movement, axis c
axes x, y, z, driven by servo motors
control panel - touch panel
year of manufacture: 2007
weight: 190 kg

dimensions:
weight: 8800 kg
length/width/height: 5.60 x 1.60 x 2.40 m

drive:
pump/motor: 30 kw

price: on request BATTENFELD TM 240/1330 WITH ROBOT APEX SC950W / HOURS: 9.125 CONSTRUCTION YEAR: 2014 INJECTION UNIT: SCREW DIAMETER: 55 MM SHOT WEIGHT: 594.2 G INJECTION PRESSURE: 2041 BAR DISPENSING VOLUME: 653 CC CLAMPING UNIT: CLAMPING FORCE: 240 T TIE BAR DISTANCE: 570 X 570 MM SIZE OF THE CLAMPING PLATES: 820 X 930 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B6P - CONTROL PANEL (TOUCH SCREEN) ADDITIONAL EQUIPMENT: EUROMAP 67 ROBOT INTERFACE HYDRAULIC CORE PULLING X 1 AIR VALVE X 2 CONTROL HOT-CHANNEL X 6 INJECTION UNIT CURED - BI CENTRAL LUBRICATION SYSTEM PARALLEL MOVEMENTS 2 X BATTERY WITH COMPRESSED NITROGEN (ADDITIONAL CHARGE, WHICH IS USED FOR THE FAST WORK) 5-AXIS ROBOT, A AND B MOVEMENT, AXIS C AXES X, Y, Z, DRIVEN BY SERVO MOTORS CONTROL PANEL - TOUCH PANEL YEAR OF MANUFACTURE: 2007 WEIGHT: 190 KG DIMENSIONS: WEIGHT: 8800 KG LENGTH/WIDTH/HEIGHT: 5.60 X 1.60 X 2.40 M DRIVE: PUMP/MOTOR: 30 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tm 1600/750
year of construction: 2002

injection unit:
screw diameter: 40 mm
shot weight: 257.5 g
injection pressure: 2678 bar
dosing volume: 283 ccm

clamping unit:
clamping force: 160 t
tie bar distance: 520 x 520 mm
clamping plate sizes: 760 x 755 mm
ejector: hydraulic
clamping unit: knee lever

control:
unilog b4
additional equipment:
euromap
robot interface
hardened spritzaggragt - bimetal
auto tool installation height

dimensions:
weight: 6000 kg
length/width/height: 5.00 x 1.50 x 2.10 m

drive:
pump/motor: 22 kw
heating power: 0 kw
total power: 0 kw

price: on request
BATTENFELD TM 1600/750 YEAR OF CONSTRUCTION: 2002 INJECTION UNIT: SCREW DIAMETER: 40 MM SHOT WEIGHT: 257.5 G INJECTION PRESSURE: 2678 BAR DOSING VOLUME: 283 CCM CLAMPING UNIT: CLAMPING FORCE: 160 T TIE BAR DISTANCE: 520 X 520 MM CLAMPING PLATE SIZES: 760 X 755 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE HARDENED SPRITZAGGRAGT - BIMETAL AUTO TOOL INSTALLATION HEIGHT DIMENSIONS: WEIGHT: 6000 KG LENGTH/WIDTH/HEIGHT: 5.00 X 1.50 X 2.10 M DRIVE: PUMP/MOTOR: 22 KW HEATING POWER: 0 KW TOTAL POWER: 0 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-battenfeld tms 2100-1330
year of construction: 2003

injection unit:
screw diameter: 55 mm
displacement: 653 cc
injection pressure: 2041 bar
shot weight: 594 g / ps

clamping unit:
clamping force: 210to.
clear width between columns: 570 x 570 mm tool clamping plate sizes: 840 x 840 mm
ejector: hydraulic
clamping unit: knee lever

control: unilog b4

additional equipment:
euromap
robot interface
control hot-channel x 12
central lubrication unit
automatic adjust of the height of the form proportionelventil on the injection unit injection unit from bi-metal
enrgeisparennde machine - inverter self-closing nozzle.

dimensions:
length/width/height: 7.06 x 1.74 x 2.21 m

price: on request
BATTENFELD TMS 2100-1330 YEAR OF CONSTRUCTION: 2003 INJECTION UNIT: SCREW DIAMETER: 55 MM DISPLACEMENT: 653 CC INJECTION PRESSURE: 2041 BAR SHOT WEIGHT: 594 G / PS CLAMPING UNIT: CLAMPING FORCE: 210TO. CLEAR WIDTH BETWEEN COLUMNS: 570 X 570 MM TOOL CLAMPING PLATE SIZES: 840 X 840 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: UNILOG B4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CONTROL HOT-CHANNEL X 12 CENTRAL LUBRICATION UNIT AUTOMATIC ADJUST OF THE HEIGHT OF THE FORM PROPORTIONELVENTIL ON THE INJECTION UNIT INJECTION UNIT FROM BI-METAL ENRGEISPARENNDE MACHINE - INVERTER SELF-CLOSING NOZZLE. DIMENSIONS: LENGTH/WIDTH/HEIGHT: 7.06 X 1.74 X 2.21 M PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-offer / offer:
battenfeld tm 550/450 unilog b4
bj. 2007

lt (delivery date) 15 20.10.2018! OFFER / OFFER: BATTENFELD TM 550/450 UNILOG B4 BJ. 2007 LT (DELIVERY DATE) 15 20.10.2018!
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-weight: 8800 kg
hydraulic operating pressure: 210 bar WEIGHT: 8800 KG HYDRAULIC OPERATING PRESSURE: 210 BAR
Vendedor: BASTA
Año de construcción: usado
Ubicación: Land-270ton 270TON 270 TONELADAS
Vendedor: D&M MACHINERY LTD

Maquinas de riego e inyección sintética more

Año de construcción: usado
Ubicación: Land-injection molding machine battenfeld ba2000/630 3 k in 2008, overhauled the machine has no handling, according to technicians from wittmann battenfeld (usage last week) good and fully operational.
she would be now. INJECTION MOLDING MACHINE BATTENFELD BA2000/630 3 K IN 2008, OVERHAULED THE MACHINE HAS NO HANDLING, ACCORDING TO TECHNICIANS FROM WITTMANN BATTENFELD (USAGE LAST WEEK) GOOD AND FULLY OPERATIONAL. SHE WOULD BE NOW.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-manufacturer:	battenfeld

type of machine:	       tm 100 / 525
year:                               2006
controlversion:	        b 4
screen text:	               german
operating hours            26.400 h

extras
-robot interface
-new screw change in 2017

technical details

clamping unit
clamping force:	                    1.100 kn
size of mould platens (h x v):    640 x 663 mm
distance tie bars (h x v):            420 x 420 mm
mould opening stroke:	             680 mm (max)
mould height min.:	                    200 mm
mould height max.:	            450 mm
max daylight:	                           830 mm
hydraulic ejector - stroke:	   140 mm
ejector force forward/backward:	26,4 kn
injection unit
screw diameter:	         40 mm
ls/d ratio:	                 22
injection pressure:	         2100 bar
stroke volume:	        251 ccm
shot weight, ps:	        228,4 g
nozzle pressure:	        86 kn

electric and hydraulic equipment

adjustable barrel heating zones:	1+3
pump power	                               15 kw
oil	                                               250 l
 
 
dimensions und weights
total machine weight:	        4.400 kg
dimensions ( l x b x h ) 4,3 x 1,5 x 2,1 m


***available at our storage in hannover)***

***free loaded on truck of the buyer or free delivery against freight reimbursement***

***the machine is offered function-tested****

***all our offered machines are in our own property***
 MANUFACTURER: BATTENFELD TYPE OF MACHINE: TM 100 / 525 YEAR: 2006 CONTROLVERSION: B 4 SCREEN TEXT: GERMAN OPERATING HOURS 26.400 H EXTRAS -ROBOT INTERFACE -NEW SCREW CHANGE IN 2017 TECHNICAL DETAILS CLAMPING UNIT CLAMPING FORCE: 1.100 KN SIZE OF MOULD PLATENS (H X V): 640 X 663 MM DISTANCE TIE BARS (H X V): 420 X 420 MM MOULD OPENING STROKE: 680 MM (MAX) MOULD HEIGHT MIN.: 200 MM MOULD HEIGHT MAX.: 450 MM MAX DAYLIGHT: 830 MM HYDRAULIC EJECTOR - STROKE: 140 MM EJECTOR FORCE FORWARD/BACKWARD: 26,4 KN INJECTION UNIT SCREW DIAMETER: 40 MM LS/D RATIO: 22 INJECTION PRESSURE: 2100 BAR STROKE VOLUME: 251 CCM SHOT WEIGHT, PS: 228,4 G NOZZLE PRESSURE: 86 KN ELECTRIC AND HYDRAULIC EQUIPMENT ADJUSTABLE BARREL HEATING ZONES: 1+3 PUMP POWER 15 KW OIL 250 L DIMENSIONS UND WEIGHTS TOTAL MACHINE WEIGHT: 4.400 KG DIMENSIONS ( L X B X H ) 4,3 X 1,5 X 2,1 M ***AVAILABLE AT OUR STORAGE IN HANNOVER)*** ***FREE LOADED ON TRUCK OF THE BUYER OR FREE DELIVERY AGAINST FREIGHT REIMBURSEMENT*** ***THE MACHINE IS OFFERED FUNCTION-TESTED**** ***ALL OUR OFFERED MACHINES ARE IN OUR OWN PROPERTY***
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Precio: 4.550 £
Ubicación: Land-injection moulding machine. 35mm screw, unilog b2 controller, 490x490 patten plate, 320x320 between tie bars, 50mm tie bar, 210 injection unit. 380 volts, spare set heatter bands.          INJECTION MOULDING MACHINE. 35MM SCREW, UNILOG B2 CONTROLLER, 490X490 PATTEN PLATE, 320X320 BETWEEN TIE BARS, 50MM TIE BAR, 210 INJECTION UNIT. 380 VOLTS, SPARE SET HEATTER BANDS.
Vendedor: Petros Textiles (1969) LTD
Año de construcción: usado
Ubicación: Land-warehouse no.: 	502568
manufacturer: 	battenfeld
typ:	plus 350-75
controller unit:	unilog 1020
year of construction:	1999
operating hours:	33803 h

the injection molding machine manufacturer battenfeld has been developed the series plus that is a small and compact injection molding series.
these plus series are still very robust. this machine, which is named plus 350-75 is very space-saving.
the closing unit has two bars and a fully hydraulic clamping unit.
the operator terminal is integrated directly in the cabinet of the machine.

like all our machines, the machine is cleaned and checked by wittmann battenfeld service in detail.
then we could replace defective parts and we could to any necessary repairs in professional way.
of course, a visit after a agreement during a test run is possible.


technical data: clamping unit
type of drive:	fully hydraulically
clamping type:	fully hydraulic
method of construction:	two tie bars
clamping force:	350	kn
distance between tie bars h:	270	mm
size of mould plates h:	470	mm
size of mould plates v:	280	mm
min. mould height:	150	mm
max. mould height:	250	mm
max. open daylight:	450	mm
opening stroke:	200	mm
ejector stroke:	100	mm
ejector force:	26	kn
centring device diameter of moving platen:	110	mm
centring device diameter of fixed platen:	110	mm
technical data:injection unit
screw diameter:	22	mm
swept volume:	38	ccm
injection pressure:	2034	bar
screw length:	16	l/d
screw stroke:	100	mm
screw rotation:	400	min
screw torque:	190	n
plasticising rate:	10	g/s ps
injection rate into the open:	57	g/s ps
number of heating zones:	2	
nozzle contact force:	35	kn
nozzle stroke:	150	mm

measure & weight
measures of machine lxbxh:	2.2m x 0.934m x 1.66m
total weight:	1050kg

equipment included


    ? electric interface for handling units according to euromap 12
    ? air valve 1x
    ? machine without handling
    ? machine incl. water flow regulator
    ? machine without material hopper
    ? cee-socket 16a
    ? anti vibration mounts 
 WAREHOUSE NO.: 502568 MANUFACTURER: BATTENFELD TYP: PLUS 350-75 CONTROLLER UNIT: UNILOG 1020 YEAR OF CONSTRUCTION: 1999 OPERATING HOURS: 33803 H THE INJECTION MOLDING MACHINE MANUFACTURER BATTENFELD HAS BEEN DEVELOPED THE SERIES PLUS THAT IS A SMALL AND COMPACT INJECTION MOLDING SERIES. THESE PLUS SERIES ARE STILL VERY ROBUST. THIS MACHINE, WHICH IS NAMED PLUS 350-75 IS VERY SPACE-SAVING. THE CLOSING UNIT HAS TWO BARS AND A FULLY HYDRAULIC CLAMPING UNIT. THE OPERATOR TERMINAL IS INTEGRATED DIRECTLY IN THE CABINET OF THE MACHINE. LIKE ALL OUR MACHINES, THE MACHINE IS CLEANED AND CHECKED BY WITTMANN BATTENFELD SERVICE IN DETAIL. THEN WE COULD REPLACE DEFECTIVE PARTS AND WE COULD TO ANY NECESSARY REPAIRS IN PROFESSIONAL WAY. OF COURSE, A VISIT AFTER A AGREEMENT DURING A TEST RUN IS POSSIBLE. TECHNICAL DATA: CLAMPING UNIT TYPE OF DRIVE: FULLY HYDRAULICALLY CLAMPING TYPE: FULLY HYDRAULIC METHOD OF CONSTRUCTION: TWO TIE BARS CLAMPING FORCE: 350 KN DISTANCE BETWEEN TIE BARS H: 270 MM SIZE OF MOULD PLATES H: 470 MM SIZE OF MOULD PLATES V: 280 MM MIN. MOULD HEIGHT: 150 MM MAX. MOULD HEIGHT: 250 MM MAX. OPEN DAYLIGHT: 450 MM OPENING STROKE: 200 MM EJECTOR STROKE: 100 MM EJECTOR FORCE: 26 KN CENTRING DEVICE DIAMETER OF MOVING PLATEN: 110 MM CENTRING DEVICE DIAMETER OF FIXED PLATEN: 110 MM TECHNICAL DATA:INJECTION UNIT SCREW DIAMETER: 22 MM SWEPT VOLUME: 38 CCM INJECTION PRESSURE: 2034 BAR SCREW LENGTH: 16 L/D SCREW STROKE: 100 MM SCREW ROTATION: 400 MIN SCREW TORQUE: 190 N PLASTICISING RATE: 10 G/S PS INJECTION RATE INTO THE OPEN: 57 G/S PS NUMBER OF HEATING ZONES: 2 NOZZLE CONTACT FORCE: 35 KN NOZZLE STROKE: 150 MM MEASURE & WEIGHT MEASURES OF MACHINE LXBXH: 2.2M X 0.934M X 1.66M TOTAL WEIGHT: 1050KG EQUIPMENT INCLUDED ? ELECTRIC INTERFACE FOR HANDLING UNITS ACCORDING TO EUROMAP 12 ? AIR VALVE 1X ? MACHINE WITHOUT HANDLING ? MACHINE INCL. WATER FLOW REGULATOR ? MACHINE WITHOUT MATERIAL HOPPER ? CEE-SOCKET 16A ? ANTI VIBRATION MOUNTS
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Ubicación: Land-battenfeld
hm 110/350 + 210 l
tonnage:110
construction year 2011
screw diameter:a-40 b-35
robot connection euromap-12
core pull: 1
air ejection: 1
rotating table 600 mm, 12 hot runner
robot wittmann mod. w 811, year 2012, motan doser and feedmax wittmann, year 2011. BATTENFELD HM 110/350 + 210 L TONNAGE:110 CONSTRUCTION YEAR 2011 SCREW DIAMETER:A-40 B-35 ROBOT CONNECTION EUROMAP-12 CORE PULL: 1 AIR EJECTION: 1 ROTATING TABLE 600 MM, 12 HOT RUNNER ROBOT WITTMANN MOD. W 811, YEAR 2012, MOTAN DOSER AND FEEDMAX WITTMANN, YEAR 2011.
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-warehouse no.: 	502421
manufacturer: 	battenfeld
typ:	ba 500-200 cdk
controller unit:	unilog 4000
year of construction:	1997

the locking unit for this cdk series consists of a 5-point toggle lever system. this is driven centrally by a hydraulic cylinder. this system allows very high speeds to be achieved. irrespective of this, the energy consumption of this series is minimal. this used battenfeld injection molding machine can be inspected by us in the warehouse by appointment in the testrun.

technical data: clamping unit
type of drive:	fully hydraulically
clamping type:	toggle
method of construction:	four tie bars
clamping force:	500	kn
distance between tie bars h:	304	mm
distance between tie bars v:	304	mm
size of mould plates h:	550	mm
size of mould plates v:	540	mm
min. mould height:	100	mm
max. mould height:	300	mm
max. open daylight:	655	mm
opening stroke:	355	mm
ejector stroke:	100	mm
ejector force:	18	kn
centring device diameter of moving platen:	125	mm
centring device diameter of fixed platen:	125	mm

technical data:injection unit
screw diameter:	40	mm
swept volume:	134	ccm
injection pressure:	1485	bar
screw length:	18	l/d
screw stroke:	140	mm
screw rotation:	290	min
screw torque:	500	n
plasticising rate:	15	g/s ps
injection rate into the open:	117	g/s ps
number of heating zones:	5	
nozzle contact force:	57	kn
nozzle stroke:	200	mm

equipment included

    ? screen text german
    ? electric interface for handling units according to euromap 12
    ? cee-socket 16a
    ? schuko-socket 16a

measure & weight
measures of machine lxbxh:	3.8m x 1.37m x 2m
total weight:	3200kg WAREHOUSE NO.: 502421 MANUFACTURER: BATTENFELD TYP: BA 500-200 CDK CONTROLLER UNIT: UNILOG 4000 YEAR OF CONSTRUCTION: 1997 THE LOCKING UNIT FOR THIS CDK SERIES CONSISTS OF A 5-POINT TOGGLE LEVER SYSTEM. THIS IS DRIVEN CENTRALLY BY A HYDRAULIC CYLINDER. THIS SYSTEM ALLOWS VERY HIGH SPEEDS TO BE ACHIEVED. IRRESPECTIVE OF THIS, THE ENERGY CONSUMPTION OF THIS SERIES IS MINIMAL. THIS USED BATTENFELD INJECTION MOLDING MACHINE CAN BE INSPECTED BY US IN THE WAREHOUSE BY APPOINTMENT IN THE TESTRUN. TECHNICAL DATA: CLAMPING UNIT TYPE OF DRIVE: FULLY HYDRAULICALLY CLAMPING TYPE: TOGGLE METHOD OF CONSTRUCTION: FOUR TIE BARS CLAMPING FORCE: 500 KN DISTANCE BETWEEN TIE BARS H: 304 MM DISTANCE BETWEEN TIE BARS V: 304 MM SIZE OF MOULD PLATES H: 550 MM SIZE OF MOULD PLATES V: 540 MM MIN. MOULD HEIGHT: 100 MM MAX. MOULD HEIGHT: 300 MM MAX. OPEN DAYLIGHT: 655 MM OPENING STROKE: 355 MM EJECTOR STROKE: 100 MM EJECTOR FORCE: 18 KN CENTRING DEVICE DIAMETER OF MOVING PLATEN: 125 MM CENTRING DEVICE DIAMETER OF FIXED PLATEN: 125 MM TECHNICAL DATA:INJECTION UNIT SCREW DIAMETER: 40 MM SWEPT VOLUME: 134 CCM INJECTION PRESSURE: 1485 BAR SCREW LENGTH: 18 L/D SCREW STROKE: 140 MM SCREW ROTATION: 290 MIN SCREW TORQUE: 500 N PLASTICISING RATE: 15 G/S PS INJECTION RATE INTO THE OPEN: 117 G/S PS NUMBER OF HEATING ZONES: 5 NOZZLE CONTACT FORCE: 57 KN NOZZLE STROKE: 200 MM EQUIPMENT INCLUDED ? SCREEN TEXT GERMAN ? ELECTRIC INTERFACE FOR HANDLING UNITS ACCORDING TO EUROMAP 12 ? CEE-SOCKET 16A ? SCHUKO-SOCKET 16A MEASURE & WEIGHT MEASURES OF MACHINE LXBXH: 3.8M X 1.37M X 2M TOTAL WEIGHT: 3200KG
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Ubicación: Land-warehouse no.: 	502422
manufacturer: 	battenfeld
typ:	ba 500-200 cdk
controller unit:	unilog 4000
year of construction:	1997

the locking unit for this cdk series consists of a 5-point toggle lever system. this is driven centrally by a hydraulic cylinder. this system allows very high speeds to be achieved. irrespective of this, the energy consumption of this series is minimal. this used battenfeld injection molding machine can be inspected by us in the warehouse by appointment in the probelauf.

technical data: clamping unit
type of drive:	fully hydraulically
clamping type:	toggle
method of construction:	four tie bars
clamping force:	500	kn
distance between tie bars h:	304	mm
distance between tie bars v:	304	mm
size of mould plates h:	550	mm
size of mould plates v:	540	mm
min. mould height:	100	mm
max. mould height:	300	mm
max. open daylight:	655	mm
opening stroke:	355	mm
ejector stroke:	100	mm
ejector force:	18	kn
centring device diameter of moving platen:	125	mm
centring device diameter of fixed platen:	125	mm

technical data:injection unit
screw diameter:	35	mm
swept volume:	134	ccm
injection pressure:	1485	bar
screw length:	18	l/d
screw stroke:	140	mm
screw rotation:	290	min
screw torque:	500	n
plasticising rate:	15	g/s ps
injection rate into the open:	117	g/s ps
number of heating zones:	5	
nozzle contact force:	57	kn
nozzle stroke:	200	mm

equipment included

    ? screen text german
    ? cee-socket 16a
    ? schuko-socket 16a
    ? electric interface for handling units according to euromap 12

measure & weight
measures of machine lxbxh:	3.8m x 1.37m x 2m
total weight:	3200kg WAREHOUSE NO.: 502422 MANUFACTURER: BATTENFELD TYP: BA 500-200 CDK CONTROLLER UNIT: UNILOG 4000 YEAR OF CONSTRUCTION: 1997 THE LOCKING UNIT FOR THIS CDK SERIES CONSISTS OF A 5-POINT TOGGLE LEVER SYSTEM. THIS IS DRIVEN CENTRALLY BY A HYDRAULIC CYLINDER. THIS SYSTEM ALLOWS VERY HIGH SPEEDS TO BE ACHIEVED. IRRESPECTIVE OF THIS, THE ENERGY CONSUMPTION OF THIS SERIES IS MINIMAL. THIS USED BATTENFELD INJECTION MOLDING MACHINE CAN BE INSPECTED BY US IN THE WAREHOUSE BY APPOINTMENT IN THE PROBELAUF. TECHNICAL DATA: CLAMPING UNIT TYPE OF DRIVE: FULLY HYDRAULICALLY CLAMPING TYPE: TOGGLE METHOD OF CONSTRUCTION: FOUR TIE BARS CLAMPING FORCE: 500 KN DISTANCE BETWEEN TIE BARS H: 304 MM DISTANCE BETWEEN TIE BARS V: 304 MM SIZE OF MOULD PLATES H: 550 MM SIZE OF MOULD PLATES V: 540 MM MIN. MOULD HEIGHT: 100 MM MAX. MOULD HEIGHT: 300 MM MAX. OPEN DAYLIGHT: 655 MM OPENING STROKE: 355 MM EJECTOR STROKE: 100 MM EJECTOR FORCE: 18 KN CENTRING DEVICE DIAMETER OF MOVING PLATEN: 125 MM CENTRING DEVICE DIAMETER OF FIXED PLATEN: 125 MM TECHNICAL DATA:INJECTION UNIT SCREW DIAMETER: 35 MM SWEPT VOLUME: 134 CCM INJECTION PRESSURE: 1485 BAR SCREW LENGTH: 18 L/D SCREW STROKE: 140 MM SCREW ROTATION: 290 MIN SCREW TORQUE: 500 N PLASTICISING RATE: 15 G/S PS INJECTION RATE INTO THE OPEN: 117 G/S PS NUMBER OF HEATING ZONES: 5 NOZZLE CONTACT FORCE: 57 KN NOZZLE STROKE: 200 MM EQUIPMENT INCLUDED ? SCREEN TEXT GERMAN ? CEE-SOCKET 16A ? SCHUKO-SOCKET 16A ? ELECTRIC INTERFACE FOR HANDLING UNITS ACCORDING TO EUROMAP 12 MEASURE & WEIGHT MEASURES OF MACHINE LXBXH: 3.8M X 1.37M X 2M TOTAL WEIGHT: 3200KG
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Ubicación: Land-- screw dia 45 mm
- max. injection pressure 2116 bar
- max. dose 358 cm3
- tie-bars 670x670 mm
- b4 control - SCREW DIA 45 MM - MAX. INJECTION PRESSURE 2116 BAR - MAX. DOSE 358 CM3 - TIE-BARS 670X670 MM - B4 CONTROL
Vendedor: ACONI Oy
Año de construcción: usado
Ubicación: Land-locking force: 270ton
screw diam: 55mm
shot weight: 595gram
dbtb: 630 x 630
controls: unilog b2
LOCKING FORCE: 270TON SCREW DIAM: 55MM SHOT WEIGHT: 595GRAM DBTB: 630 X 630 CONTROLS: UNILOG B2 FUERZA DE CIERRE: 270 TON DIÁMETRO DE TORNILLO: 55MM TIRO EL PESO: 595 GRAMOS DBTB: 630 X 630 CONTROLES: UNILOG B2
Vendedor: D&M MACHINERY LTD

Maquinas de riego e inyección sintética more

Año de construcción: usado
Ubicación: Land-offer / offer:

2 x battenfeld tm 180 / 750 + 2 x iml robot - wittmann robot w 727 primus 1 x battenfeld tm 240 / 750 + 1 x iml robot - wittmann robot w 7 3 7 primus bj. / year 2012 only / only 300 std / wh.




injection unit:

injection unit size 750
screw diameter 45 mm
injection pressure bar 2116
injection volume cm3 358
maximum injection weight (ps) g 325.8
screw l / d ratio 22
plasticizing capacity ps 34.3 g/s

closing unit:

technical data of the closing unit max closing force kn 2400
clearance between columns the 570 x 570 mm
minimum mold height 250 mm
max mold height mm 600
road opening form mm 530
max possible distance between fixing plates 1130 mm
size of mounting plates (855) 820 x 930 mm
 OFFER / OFFER: 2 X BATTENFELD TM 180 / 750 + 2 X IML ROBOT - WITTMANN ROBOT W 727 PRIMUS 1 X BATTENFELD TM 240 / 750 + 1 X IML ROBOT - WITTMANN ROBOT W 7 3 7 PRIMUS BJ. / YEAR 2012 ONLY / ONLY 300 STD / WH. INJECTION UNIT: INJECTION UNIT SIZE 750 SCREW DIAMETER 45 MM INJECTION PRESSURE BAR 2116 INJECTION VOLUME CM3 358 MAXIMUM INJECTION WEIGHT (PS) G 325.8 SCREW L / D RATIO 22 PLASTICIZING CAPACITY PS 34.3 G/S CLOSING UNIT: TECHNICAL DATA OF THE CLOSING UNIT MAX CLOSING FORCE KN 2400 CLEARANCE BETWEEN COLUMNS THE 570 X 570 MM MINIMUM MOLD HEIGHT 250 MM MAX MOLD HEIGHT MM 600 ROAD OPENING FORM MM 530 MAX POSSIBLE DISTANCE BETWEEN FIXING PLATES 1130 MM SIZE OF MOUNTING PLATES (855) 820 X 930 MM
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-injection unit:

injection unit size 750
screw diameter 45 mm
injection pressure bar 2116
injection volume cm3 358
maximum injection weight (ps) g 325.8
screw l / d ratio 22
plasticizing capacity ps 34.3 g/s

closing unit:

technical data of the closing unit max closing force kn 2400
clearance between columns the 570 x 570 mm
minimum mold height 250 mm
max mold height mm 600
road opening form mm 530
max possible distance between fixing plates 1130 mm
size of mounting plates (855) 820 x 930 mm INJECTION UNIT: INJECTION UNIT SIZE 750 SCREW DIAMETER 45 MM INJECTION PRESSURE BAR 2116 INJECTION VOLUME CM3 358 MAXIMUM INJECTION WEIGHT (PS) G 325.8 SCREW L / D RATIO 22 PLASTICIZING CAPACITY PS 34.3 G/S CLOSING UNIT: TECHNICAL DATA OF THE CLOSING UNIT MAX CLOSING FORCE KN 2400 CLEARANCE BETWEEN COLUMNS THE 570 X 570 MM MINIMUM MOLD HEIGHT 250 MM MAX MOLD HEIGHT MM 600 ROAD OPENING FORM MM 530 MAX POSSIBLE DISTANCE BETWEEN FIXING PLATES 1130 MM SIZE OF MOUNTING PLATES (855) 820 X 930 MM
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-injection molding machine
manufacturer: battenfeld
type: bkt 1800-800 unilog 4000 b
year: 1991

technical data: screw diameter: 50 mm
specific injection pressure: 1814 bar
computed displacements: 432 cc
shot weight ps: 392 g
pinto-l/d ratio: 22.1 plasticising capacity ps: 32 g / s
clamping unit: max. clamping force: 1800 kn
clamping plate sizes: 800 x 800 mm
lights tie bar distance: 515 x 515 mm
mould installation height adjustable by up to: 200... 500 mm
opening stroke: 450 mm
maximum distance from the clamping plates: 950 mm
total investment
installed total capacity: 45.6 kw
operating voltage: 220/380 v, 50 hz
cd painting: ral 1021 yellow ral 5002 ultramarine blue ral 7031 bluish grey, ral 7035 light grey label safety regulations: german din en 201

INJECTION MOLDING MACHINE MANUFACTURER: BATTENFELD TYPE: BKT 1800-800 UNILOG 4000 B YEAR: 1991 TECHNICAL DATA: SCREW DIAMETER: 50 MM SPECIFIC INJECTION PRESSURE: 1814 BAR COMPUTED DISPLACEMENTS: 432 CC SHOT WEIGHT PS: 392 G PINTO-L/D RATIO: 22.1 PLASTICISING CAPACITY PS: 32 G / S CLAMPING UNIT: MAX. CLAMPING FORCE: 1800 KN CLAMPING PLATE SIZES: 800 X 800 MM LIGHTS TIE BAR DISTANCE: 515 X 515 MM MOULD INSTALLATION HEIGHT ADJUSTABLE BY UP TO: 200... 500 MM OPENING STROKE: 450 MM MAXIMUM DISTANCE FROM THE CLAMPING PLATES: 950 MM TOTAL INVESTMENT INSTALLED TOTAL CAPACITY: 45.6 KW OPERATING VOLTAGE: 220/380 V, 50 HZ CD PAINTING: RAL 1021 YELLOW RAL 5002 ULTRAMARINE BLUE RAL 7031 BLUISH GREY, RAL 7035 LIGHT GREY LABEL SAFETY REGULATIONS: GERMAN DIN EN 201
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-output capacity: 300kg/h, working width: 2000mm. the plant contains the following components: (1) 2 x extruder bfa plastik ex 60/25 b, built 1999. (2) extruder battenfeld e 90-25 d, built 1984, modified in 1999. (3) 3-layer die head bfa plastik, built 1999, nozzle diameter: 350mm. (4) cololing ring saturn 3. (5) sizing basket. (6) layer deposit station with folding (4m->1m), layer width: 2000mm. (7) 2 x  corona-pretreatment system ahlbrandt tg 500, built 1993. (8) double winder battenfeld ffw 2000/2, built 1987, control: siemens s 7. (9) material supply inno-plast, with gravimetric dosing, two components for each screw. capacity: 300kg/h OUTPUT CAPACITY: 300KG/H, WORKING WIDTH: 2000MM. THE PLANT CONTAINS THE FOLLOWING COMPONENTS: (1) 2 X EXTRUDER BFA PLASTIK EX 60/25 B, BUILT 1999. (2) EXTRUDER BATTENFELD E 90-25 D, BUILT 1984, MODIFIED IN 1999. (3) 3-LAYER DIE HEAD BFA PLASTIK, BUILT 1999, NOZZLE DIAMETER: 350MM. (4) COLOLING RING SATURN 3. (5) SIZING BASKET. (6) LAYER DEPOSIT STATION WITH FOLDING (4M->1M), LAYER WIDTH: 2000MM. (7) 2 X CORONA-PRETREATMENT SYSTEM AHLBRANDT TG 500, BUILT 1993. (8) DOUBLE WINDER BATTENFELD FFW 2000/2, BUILT 1987, CONTROL: SIEMENS S 7. (9) MATERIAL SUPPLY INNO-PLAST, WITH GRAVIMETRIC DOSING, TWO COMPONENTS FOR EACH SCREW. CAPACITY: 300KG/H
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-1x battenfeld extr. 90 mm, 2x bfa extr.60mm, screenchanger, 3-layer rot. die head type bfa for die inserts 175-400 mm, die insert(s)2 x 350 mms, saturn air-cooling ring with internal bubble cooling, sizing basket electr. adjust.600-2.200 mms, side gusseting,thickness measuring, haul-off unit 2,100-mm roller width, battenfeld 2 pos. contact-winder 2,100 mms with simatic control, pre-treatment, inoplast grav. dosing, in operation, capacity approx. 300 kgs/h         1X BATTENFELD EXTR. 90 MM, 2X BFA EXTR.60MM, SCREENCHANGER, 3-LAYER ROT. DIE HEAD TYPE BFA FOR DIE INSERTS 175-400 MM, DIE INSERT(S)2 X 350 MMS, SATURN AIR-COOLING RING WITH INTERNAL BUBBLE COOLING, SIZING BASKET ELECTR. ADJUST.600-2.200 MMS, SIDE GUSSETING,THICKNESS MEASURING, HAUL-OFF UNIT 2,100-MM ROLLER WIDTH, BATTENFELD 2 POS. CONTACT-WINDER 2,100 MMS WITH SIMATIC CONTROL, PRE-TREATMENT, INOPLAST GRAV. DOSING, IN OPERATION, CAPACITY APPROX. 300 KGS/H
Vendedor: A. Lang Vertriebsberatungen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)