719 ofertas

Año de construcción: usado
Ubicación: Land-ostas plate shear

type orgm 2050 x 3

-capaciteit 2050 x 3 mm
-achteraanslag electrical
-voetbediening
-fotocelbeveiliging van de achterzijde
-oplegarmen
-verlichting van snijlijn
-remmotor
-noodstop
-documentatie
-weight 2000 kg
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) OSTAS PLATE SHEAR TYPE ORGM 2050 X 3 -CAPACITEIT 2050 X 3 MM -ACHTERAANSLAG ELECTRICAL -VOETBEDIENING -FOTOCELBEVEILIGING VAN DE ACHTERZIJDE -OPLEGARMEN -VERLICHTING VAN SNIJLIJN -REMMOTOR -NOODSTOP -DOCUMENTATIE -WEIGHT 2000 KG -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 13320; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 450 ; GROSS WEIGHT [KG]: 13320; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 450
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-powder coating equipment

 parkerizing phosphate coating equipment
make:wastec(korean)
year:2014
2) process tank 
? load/unload(#1):size: 800(w) x 1,200(l) x 1,200(h)mm 
? alkali cleaner tank(#2) : size: 800(w) x 1,200(l) x 1,200(h)mm
3) 2-step water rinse bath(#3,4): size: 1,400(w) x 1,200(l) x 1,200(h)mm
4) acid rinse bath(#5): size: 750(w) x 1,200(l) x  1,200(h)mm
5) 2-step water rinse bath(#6,7): 1,400(w) x 1,200(l) x  1,200(h)mm
7) surface condition bath(#8) :: 750(w) x 1,200(l) 1,200(h)mm
8) coating bath(#9,10) : 900(w) x 1,200(l) x 1,200(h)mm
9) hot water rinse(#11) : 750(w) x 1,200(l) x 1,200(h)mm
10) dry tank(#12) :  
 size(inside): 700(w) x   1,200(l) x 1,200(h)mm
    size(outside): 1,300(w) x  2,000(l) x 1,200(h)mm  
  temp: 90?~110?
11) carrier system(#1,2): 1,400(w) x 1,600(l) x 600(h)mm 
   line speed:   transer-0.2~0.6m/sec     lifting-0.2~0.5m/sec
12) heating system :   steam heater
13) degreaser oil and water separator 
  tank(sus304): 600(w)x 1,200(l) x 700(h)mm
14) liquid agitator   
 15) acid bath filter:  4,800~6,000?/hr
16) piping system
17) basket    size: 500(w) x 600(l) x  400(h)mm
18) condensing water recovery ststem
19) electrical system 
   main power: 440v x 3Ø x 60hz  
  control power: 220v x 1Ø   x 60hz   
20) anti-polution system
21) carrier type tank :: 1,100?

sand blast m/c
make:sanga(korea)
year:2014
 conveyor type 
cycle time: 10~12sec
 cyclone & storage tank: Ø450 x 800(l)mm 
nozzle unit 
conveyor & turning unit 
loading/unloading unit 
nozzle oscillator 
dust collector

anti-air pollution equipment 
make:seonghwa(korea)
year:2014
packed-tower 
cap: 230cmm 
body: ?2,000 x 5,000(l)mm 
stack: ?650 x 3,000(l)mm 
turbo fan: 230?/min x 200mmaq 
motor: 20hp 

coating and dryer 
make:wastec(korean)
year:2002
14,500(l) x 4,000(w x 1,500(h) 
2) 300kw  
cap: 1,080ea/hr 
1) preheater dryer: 3,000(l) x 2,200(w)  , 30kw(1set)  
 blower: 23.3? x 19mmaq          
2) 1st coating  1,500(l) x 2,000(w)
nozzle: 6set 
 3) 1st dryer: 4,800(l) x 2,200(w), 24kw(2set)  
 blower: 20? x 17mmaq(2set)
4) 2nd coating  
 nozzle: 6set , 1,500(l) x 2,000(w)
5) 2nd dryer:: 4,000(l) x 2,000(w), 30kw(1set)  
 blower: 20? x 17mmaq(1set)
6) low temperature dryer:: 12,500(l) x 1,000(w), 30kw(3set)  
 blower: 23.3? x 190mmaq (3set)
7) cooling  : 1,000(l) x 800(w) , 10kw(1set)

washing equipment 
make:wastec(korean)
year:2002
7,000(l) x 1,100(w) x 1,800(h) 
2) cap: 1,500ea/hr 
3) 100kw
4)  r/o system
5) electric heater type

 dryer 
make:hanil(korea)
year:2002
 size: 1,440(l) x 2,000(w) x 1,530(h)
2) cap: 1,000ea/hr 
3)  40kw
4) car and rack 2set
5) heater: scr unit type

washer & bush insert m/c 
make:kumduk(korea)
year:2015
turn table unit: 2head 
unloading loader 
base & frame & cover: 75 x 75mm square pipe 
in loader unit 
index table unit 
washer loader unit x 2set
 washer check unit 
bush feed press unit: bush 

3-pin press  
make:kumduk(korea)
year:2015
base & frame & cover 
6-axics multi articulation  robot(yaskawa) 
manipulator
 index table unit 
3-pin feed unit
3-pin press unit 
unloading unit
 3-pin height check unit 

air compressor
make:taesan(korea)
year:2015
 
shaft powder coating line
make:misung(korea)
year:2015
 loading & unloading unit 
 preheater dry oven 45kw(15kw x 3set)
preheater after cooling zone: 
4) powder automatic equipment
5) idle transfer & index unit
6) loading transfer & masking    jig unit
7) oven jig: 16 x 130ea
8) powder recovery system
9) main baking oven 
10) floor conveyor
11) main cooling zone 

   bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
  POWDER COATING EQUIPMENT PARKERIZING PHOSPHATE COATING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2014 2) PROCESS TANK ? LOAD/UNLOAD(#1):SIZE: 800(W) X 1,200(L) X 1,200(H)MM ? ALKALI CLEANER TANK(#2) : SIZE: 800(W) X 1,200(L) X 1,200(H)MM 3) 2-STEP WATER RINSE BATH(#3,4): SIZE: 1,400(W) X 1,200(L) X 1,200(H)MM 4) ACID RINSE BATH(#5): SIZE: 750(W) X 1,200(L) X 1,200(H)MM 5) 2-STEP WATER RINSE BATH(#6,7): 1,400(W) X 1,200(L) X 1,200(H)MM 7) SURFACE CONDITION BATH(#8) :: 750(W) X 1,200(L) 1,200(H)MM 8) COATING BATH(#9,10) : 900(W) X 1,200(L) X 1,200(H)MM 9) HOT WATER RINSE(#11) : 750(W) X 1,200(L) X 1,200(H)MM 10) DRY TANK(#12) : SIZE(INSIDE): 700(W) X 1,200(L) X 1,200(H)MM SIZE(OUTSIDE): 1,300(W) X 2,000(L) X 1,200(H)MM TEMP: 90?~110? 11) CARRIER SYSTEM(#1,2): 1,400(W) X 1,600(L) X 600(H)MM LINE SPEED: TRANSER-0.2~0.6M/SEC LIFTING-0.2~0.5M/SEC 12) HEATING SYSTEM : STEAM HEATER 13) DEGREASER OIL AND WATER SEPARATOR TANK(SUS304): 600(W)X 1,200(L) X 700(H)MM 14) LIQUID AGITATOR 15) ACID BATH FILTER: 4,800~6,000?/HR 16) PIPING SYSTEM 17) BASKET SIZE: 500(W) X 600(L) X 400(H)MM 18) CONDENSING WATER RECOVERY STSTEM 19) ELECTRICAL SYSTEM MAIN POWER: 440V X 3Ø X 60HZ CONTROL POWER: 220V X 1Ø X 60HZ 20) ANTI-POLUTION SYSTEM 21) CARRIER TYPE TANK :: 1,100? SAND BLAST M/C MAKE:SANGA(KOREA) YEAR:2014 CONVEYOR TYPE CYCLE TIME: 10~12SEC CYCLONE & STORAGE TANK: Ø450 X 800(L)MM NOZZLE UNIT CONVEYOR & TURNING UNIT LOADING/UNLOADING UNIT NOZZLE OSCILLATOR DUST COLLECTOR ANTI-AIR POLLUTION EQUIPMENT MAKE:SEONGHWA(KOREA) YEAR:2014 PACKED-TOWER CAP: 230CMM BODY: ?2,000 X 5,000(L)MM STACK: ?650 X 3,000(L)MM TURBO FAN: 230?/MIN X 200MMAQ MOTOR: 20HP COATING AND DRYER MAKE:WASTEC(KOREAN) YEAR:2002 14,500(L) X 4,000(W X 1,500(H) 2) 300KW CAP: 1,080EA/HR 1) PREHEATER DRYER: 3,000(L) X 2,200(W) , 30KW(1SET) BLOWER: 23.3? X 19MMAQ 2) 1ST COATING 1,500(L) X 2,000(W) NOZZLE: 6SET 3) 1ST DRYER: 4,800(L) X 2,200(W), 24KW(2SET) BLOWER: 20? X 17MMAQ(2SET) 4) 2ND COATING NOZZLE: 6SET , 1,500(L) X 2,000(W) 5) 2ND DRYER:: 4,000(L) X 2,000(W), 30KW(1SET) BLOWER: 20? X 17MMAQ(1SET) 6) LOW TEMPERATURE DRYER:: 12,500(L) X 1,000(W), 30KW(3SET) BLOWER: 23.3? X 190MMAQ (3SET) 7) COOLING : 1,000(L) X 800(W) , 10KW(1SET) WASHING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2002 7,000(L) X 1,100(W) X 1,800(H) 2) CAP: 1,500EA/HR 3) 100KW 4) R/O SYSTEM 5) ELECTRIC HEATER TYPE DRYER MAKE:HANIL(KOREA) YEAR:2002 SIZE: 1,440(L) X 2,000(W) X 1,530(H) 2) CAP: 1,000EA/HR 3) 40KW 4) CAR AND RACK 2SET 5) HEATER: SCR UNIT TYPE WASHER & BUSH INSERT M/C MAKE:KUMDUK(KOREA) YEAR:2015 TURN TABLE UNIT: 2HEAD UNLOADING LOADER BASE & FRAME & COVER: 75 X 75MM SQUARE PIPE IN LOADER UNIT INDEX TABLE UNIT WASHER LOADER UNIT X 2SET WASHER CHECK UNIT BUSH FEED PRESS UNIT: BUSH 3-PIN PRESS MAKE:KUMDUK(KOREA) YEAR:2015 BASE & FRAME & COVER 6-AXICS MULTI ARTICULATION ROBOT(YASKAWA) MANIPULATOR INDEX TABLE UNIT 3-PIN FEED UNIT 3-PIN PRESS UNIT UNLOADING UNIT 3-PIN HEIGHT CHECK UNIT AIR COMPRESSOR MAKE:TAESAN(KOREA) YEAR:2015 SHAFT POWDER COATING LINE MAKE:MISUNG(KOREA) YEAR:2015 LOADING & UNLOADING UNIT PREHEATER DRY OVEN 45KW(15KW X 3SET) PREHEATER AFTER COOLING ZONE: 4) POWDER AUTOMATIC EQUIPMENT 5) IDLE TRANSFER & INDEX UNIT 6) LOADING TRANSFER & MASKING JIG UNIT 7) OVEN JIG: 16 X 130EA 8) POWDER RECOVERY SYSTEM 9) MAIN BAKING OVEN 10) FLOOR CONVEYOR 11) MAIN COOLING ZONE BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 9.800 €
Ubicación: Land-; gross weight [kg]: 7448; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7448; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land--1 cross slide 70.45,
-1 bed 70.12, 
-1 head stock 70-31 (mounted on bearings – last generation) - spindle w12,
-1 manual lever-operated collet quick-closing attachement 70-30.600,
-1 « fr. vögtle » 2 speed motor (1500/3000 rpm), power suppley 380[v],
-1 belt,
-1 multifix type a-a quick-change tool post,
-1 multifix type a-a tool holder.

price vat excluded, on request.

shipping in europe is possible.


more details on request. -1 CROSS SLIDE 70.45, -1 BED 70.12, -1 HEAD STOCK 70-31 (MOUNTED ON BEARINGS – LAST GENERATION) - SPINDLE W12, -1 MANUAL LEVER-OPERATED COLLET QUICK-CLOSING ATTACHEMENT 70-30.600, -1 « FR. VöGTLE » 2 SPEED MOTOR (1500/3000 RPM), POWER SUPPLEY 380[V], -1 BELT, -1 MULTIFIX TYPE A-A QUICK-CHANGE TOOL POST, -1 MULTIFIX TYPE A-A TOOL HOLDER. PRICE VAT EXCLUDED, ON REQUEST. SHIPPING IN EUROPE IS POSSIBLE. MORE DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7450; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7450; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-haitian htf 86 x
year of construction: 2006

injection unit:
screw diameter: 36 mm
shot weight: 134 g
dispensing volume: cc 147

clamping unit:
clamping force: 86 t
tie bar distance: 360 x 360 mm
size of the clamping plates: 534 x 535 mm
ejector: hydraulic
clamping unit: knee lever

control: keba

additional equipment:
euromap
robot interface
hydraulic core pulling x 2
hot channel control
central lubrication system
auto tool installation height

dimensions:
weight: 3450 kg
length/width/height: 4.50 x 1.25 x 1.90 m

drive:
pump/motor: 13 kw
heating capacity: 6.2 kw
total capacity: 19.2 kw

price: on request HAITIAN HTF 86 X YEAR OF CONSTRUCTION: 2006 INJECTION UNIT: SCREW DIAMETER: 36 MM SHOT WEIGHT: 134 G DISPENSING VOLUME: CC 147 CLAMPING UNIT: CLAMPING FORCE: 86 T TIE BAR DISTANCE: 360 X 360 MM SIZE OF THE CLAMPING PLATES: 534 X 535 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: KEBA ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE HYDRAULIC CORE PULLING X 2 HOT CHANNEL CONTROL CENTRAL LUBRICATION SYSTEM AUTO TOOL INSTALLATION HEIGHT DIMENSIONS: WEIGHT: 3450 KG LENGTH/WIDTH/HEIGHT: 4.50 X 1.25 X 1.90 M DRIVE: PUMP/MOTOR: 13 KW HEATING CAPACITY: 6.2 KW TOTAL CAPACITY: 19.2 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-spindle diameter:        mm<br/>x travel:   4500 mm<br/>y travel:   1800 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   4500 mm<br/>- y-axis travel:   1800 mm<br/>- z-axis travel:   2000 mm<br/>- w-axis travel:   1000 mm<br/>table:  <br/>- table surface (left-right):   2000 mm<br/>- table surface (front-back):   1400 mm<br/>- workpiece load (max):  10000 kg<br/>tool magazine:  <br/>- number of positions:     60  <br/>automatic workload equipment:  <br/>- store type: table changer:        <br/>- number of store positions:      2  <br/><br/><br/><br/><br/> SPINDLE DIAMETER: MM
X TRAVEL: 4500 MM
Y TRAVEL: 1800 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 4500 MM
- Y-AXIS TRAVEL: 1800 MM
- Z-AXIS TRAVEL: 2000 MM
- W-AXIS TRAVEL: 1000 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 2000 MM
- TABLE SURFACE (FRONT-BACK): 1400 MM
- WORKPIECE LOAD (MAX): 10000 KG
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 60
AUTOMATIC WORKLOAD EQUIPMENT:
- STORE TYPE: TABLE CHANGER:
- NUMBER OF STORE POSITIONS: 2




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type f8l413fw

128 kw at 2000 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE F8L413FW 128 KW AT 2000 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-x-travel: 650 mm<br/>y-travel: 450 mm<br/>: 140 mm<br/>w-axis (movable cross beam): 500 mm<br/>cnc-control: siemens 840d <br/>workpiece height:  mm<br/>table-size: 770 x 630 mm<br/>voltage: 400 v<br/>table load: max. 500 kg<br/>feed speeds: 0 - 1500 mm/min<br/>rapid traverse: 0 - 3000 m/min<br/>rapid traverse - down: 800 mm/min<br/>grinding spindle speed: 4.500 - 80.000 u/min<br/>cone grinding up to: 16 grad<br/>total power requirement:  kw<br/>weight of the machine ca.: 4,0 t<br/>dimensions of the machine ca.: 2,35 x 2,65 x 2,65 / 3,15 m<br/>round table:  <br/>tool cabinet:  <br/><br/><br/><br/><br/> X-TRAVEL: 650 MM
Y-TRAVEL: 450 MM
: 140 MM
W-AXIS (MOVABLE CROSS BEAM): 500 MM
CNC-CONTROL: SIEMENS 840D
WORKPIECE HEIGHT: MM
TABLE-SIZE: 770 X 630 MM
VOLTAGE: 400 V
TABLE LOAD: MAX. 500 KG
FEED SPEEDS: 0 - 1500 MM/MIN
RAPID TRAVERSE: 0 - 3000 M/MIN
RAPID TRAVERSE - DOWN: 800 MM/MIN
GRINDING SPINDLE SPEED: 4.500 - 80.000 U/MIN
CONE GRINDING UP TO: 16 GRAD
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 4,0 T
DIMENSIONS OF THE MACHINE CA.: 2,35 X 2,65 X 2,65 / 3,15 M
ROUND TABLE:
TOOL CABINET:




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-well-functioning used hatz engine (diesel) type 4m40l

we have a large choice of new and used engines. 
please contact us regarding pricing and availability.
  WELL-FUNCTIONING USED HATZ ENGINE (DIESEL) TYPE 4M40L WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-used revision needed deutz motor (diesel) type tcd2012l042v

103 kw at 2400 rpm

we have a large choice of new and used engines. 
please contact us regarding pricing and availability.
  USED REVISION NEEDED DEUTZ MOTOR (DIESEL) TYPE TCD2012L042V 103 KW AT 2400 RPM WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-frame stainless steel, stone working plate\r\ninclude: 6 drawers + 2 doors\r\ndimension: l 2400, w/d 800, h 845 mm\r\n FRAME STAINLESS STEEL, STONE WORKING PLATE\R\NINCLUDE: 6 DRAWERS + 2 DOORS\R\NDIMENSION: L 2400, W/D 800, H 845 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-well-functioning used perkins engine (diesel) type ak36525

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED PERKINS ENGINE (DIESEL) TYPE AK36525 WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-volume scaling, cap. max. 50 cycl/min.,(estimation)\r\nvolume scaling between 450 - 1350 ccm, (depends on the product)\r\ndepositing nozzles changeable,\r\ndiameter of the nozzle approx. 24 mm, hopper approx. 60 l\r\nmade from stainless steel, machine moveable\r\n VOLUME SCALING, CAP. MAX. 50 CYCL/MIN.,(ESTIMATION)\R\NVOLUME SCALING BETWEEN 450 - 1350 CCM, (DEPENDS ON THE PRODUCT)\R\NDEPOSITING NOZZLES CHANGEABLE,\R\NDIAMETER OF THE NOZZLE APPROX. 24 MM, HOPPER APPROX. 60 L\R\NMADE FROM STAINLESS STEEL, MACHINE MOVEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type bf6m1013ec

139 kw at 1500 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE BF6M1013EC 139 KW AT 1500 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 ,  l  2100 mm\r\ndistance between hopper / floor 1950 mm\r\n STAINLESS STEEL CONSTRUCTION, HOPPER CONTAINS APPROX. 240 KG DOUGH, HOPPER INSIDE TEFLON COATED, KNIFE FOR CUTTING THE DOUGH, FEEDING CONTROL BY FOTOCELL \R\NDIMENSION: H 2850 , W 1450 , L 2100 MM\R\NDISTANCE BETWEEN HOPPER / FLOOR 1950 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-new deutz engine (diesel) type bf4m1013ec

118 kw at 2300 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 NEW DEUTZ ENGINE (DIESEL) TYPE BF4M1013EC 118 KW AT 2300 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 ,  l  2100 mm\r\ndistance between hopper / floor 1950 mm\r\n STAINLESS STEEL CONSTRUCTION, HOPPER CONTAINS APPROX. 240 KG DOUGH, HOPPER INSIDE TEFLON COATED, KNIFE FOR CUTTING THE DOUGH, FEEDING CONTROL BY FOTOCELL \R\NDIMENSION: H 2850 , W 1450 , L 2100 MM\R\NDISTANCE BETWEEN HOPPER / FLOOR 1950 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-nominal capacity, t.                          63
nominal capacity by each position, t.         20
max. stroke of cushion, mm:                   18 - 56
ram stroke, mm:                               280
distance between uprights, mm                 2200
stamping position:                            12
distance between position, mm                 180
table dimensions, mm                          2200
number of positions with cut pos.             12
adjustment of tool holder in ram, mm          50
closed high, mm                               430 mm
shut height, mm                               710 mm.
weidth of coil, max., mm                      280
max. Ø  stamppcs., mm:                        140 - 200
motor, kw:                                    20  
press dimensions:                             4500 x 3500 x 4300 mm.

    - subject to prior sale -  
    - with the right for shorthand, technical mistakes and typos, not-binding -

we remain at your disposal for any question you may have. NOMINAL CAPACITY, T. 63 NOMINAL CAPACITY BY EACH POSITION, T. 20 MAX. STROKE OF CUSHION, MM: 18 - 56 RAM STROKE, MM: 280 DISTANCE BETWEEN UPRIGHTS, MM 2200 STAMPING POSITION: 12 DISTANCE BETWEEN POSITION, MM 180 TABLE DIMENSIONS, MM 2200 NUMBER OF POSITIONS WITH CUT POS. 12 ADJUSTMENT OF TOOL HOLDER IN RAM, MM 50 CLOSED HIGH, MM 430 MM SHUT HEIGHT, MM 710 MM. WEIDTH OF COIL, MAX., MM 280 MAX. Ø STAMPPCS., MM: 140 - 200 MOTOR, KW: 20 PRESS DIMENSIONS: 4500 X 3500 X 4300 MM. - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING - WE REMAIN AT YOUR DISPOSAL FOR ANY QUESTION YOU MAY HAVE.
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-tube bending machines(80mm)

 
tube bending m/c x2sets

make: soco(taiwan)

year:2010

 model: sb-83x-3s-sr-1b

  cap.: max.ø63.5mm   draw bending radius: max.250mm

  collet feeding length stroke  : max.2,600mm

  length over mandrel: max.4,340mm

  interference zone booster stroke  : 100mm

  bending angle: 190°

  no. of bend per tube: 50bends

  pc control unit

  tool x2set

 

saw cutting m/c x2sets

make: soco(taiwan)

year:2010

model: hvs-355ac-b

  cap.: max.ø63.5mm

  semi auto

  cap.: max.ø100mm, min. (l)20mm

  saw: ø355mm

controller

 

 pipe expander/pipe diamenter reduction machine x2sets

make: wtm(taiwan)

year:2010

. model: w10-sy50-2

  2 head type, hydraulic type

  cap.: reduction ø53~ø44mm

        expanding ø39~ø50mm

stroke: 75mm

  hydraulic unit: 7.5kw

  controller

 

circular sawing m/c

make: soco(taiwan)

year:2011

model:sa-78nce(3m)

cap:round:ø10~76m/m

      square:10x10~70x70m/m

      rectangular:15x10~80x70m/m

  saw blads:tct

  length of cut:50~3,000m/m

  sawing speed:45~272m/min

 

cnc pipe bender

make: ylm(taiwan)

year:2010

  cap' s TUBE BENDING MACHINES(80MM) TUBE BENDING M/C X2SETS MAKE: SOCO(TAIWAN) YEAR:2010 MODEL: SB-83X-3S-SR-1B CAP.: MAX.ø63.5MM DRAW BENDING RADIUS: MAX.250MM COLLET FEEDING LENGTH STROKE : MAX.2,600MM LENGTH OVER MANDREL: MAX.4,340MM INTERFERENCE ZONE BOOSTER STROKE : 100MM BENDING ANGLE: 190° NO. OF BEND PER TUBE: 50BENDS PC CONTROL UNIT TOOL X2SET SAW CUTTING M/C X2SETS MAKE: SOCO(TAIWAN) YEAR:2010 MODEL: HVS-355AC-B CAP.: MAX.ø63.5MM SEMI AUTO CAP.: MAX.ø100MM, MIN. (L)20MM SAW: ø355MM CONTROLLER PIPE EXPANDER/PIPE DIAMENTER REDUCTION MACHINE X2SETS MAKE: WTM(TAIWAN) YEAR:2010 . MODEL: W10-SY50-2 2 HEAD TYPE, HYDRAULIC TYPE CAP.: REDUCTION ø53~ø44MM EXPANDING ø39~ø50MM STROKE: 75MM HYDRAULIC UNIT: 7.5KW CONTROLLER CIRCULAR SAWING M/C MAKE: SOCO(TAIWAN) YEAR:2011 MODEL:SA-78NCE(3M) CAP:ROUND:ø10~76M/M SQUARE:10X10~70X70M/M RECTANGULAR:15X10~80X70M/M SAW BLADS:TCT LENGTH OF CUT:50~3,000M/M SAWING SPEED:45~272M/MIN CNC PIPE BENDER MAKE: YLM(TAIWAN) YEAR:2010 CAP' S " 80MS MODEL : CNC-80MS-8A + CUT OFF CONSIST WITH - BASIC MACHINE WITH STANDARD ACCESSORIES MAX. TUBE WALL THICKNESS:3.0 CLR : 250 MAX. MANDREL WORKING DISTANCE : 2500 SPEED : 600 ~ 800 MACHINE LENGTH : 6100MM MACHINE WIDTH : 2100MM MACHINE HEIGHT : 1650MM CNC PIPE BENDING MACHINE MAKE: YLM(TAIWAN) YEAR:2013 MODEL:CNC-80MS-RSM-8A MAX TUBE BENDING CAP':ø10~80MM MAX TUBE WALL THICKNESS:3.0MM MAX BENDING ANGLE:190° MAX MANDREL WORKING DISTANCE :4,000MM MAIN MOTOR:15? CONTROL PANEL INSIDE ?SERVO PACK:SGDM-1EADA X1EA ?SERVO PACK:SGDM-75ADA XEA OPERATE PANEL TOUCH SCREEN TYPE DIM:550X450X1,430MM(H) FULL AUTO PIPE CHAMFERING M/C MAKE: DONGSUNG(KOREA) YEAR:2015 MODEL: DSM302C-FA CAP: ø15~ø70MM PIPE LENGTH: 130~1,200MM SPEED:3SEC/EA CAMFERING MOTOR:3.75KW X 2EA LENGTH CHECKER AUTOMATIC LOADER BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-dimension of wafer sheets 360 x 450 mm\r\n1.  cut 32 mm \r\n2.  cut 30 mm\r\nstacking height approx. 5 - 80 mm\r\n DIMENSION OF WAFER SHEETS 360 X 450 MM\R\N1. CUT 32 MM \R\N2. CUT 30 MM\R\NSTACKING HEIGHT APPROX. 5 - 80 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hollow plastic profile board production line

 
make: qingdao(korea)

year:2016

hollow profile board coextrusion production line

1-1) single screw extruder :

model : cnu(1)-w120x33

equipped with vacuum loader

-sju-300kg

motor 132kw 60hz

1-1) single screw extruder :

model : cnu(1)-w75x33

equipped with vacuum loader

-sju-200kg

motor:90kw 60hz

1-3) hydraulic screen changer

model : gd-ssp-150, gd-ssp-100

1-4) hollow profile board mould

t-dice

coat-hanger type  mould, board

size: a/b/a 2300x4mm-6mm

1-5) shape forming mould

800mmx2500x80mm

1-6) the 1st 5-roller haul-off

250x2500mm, ac 15 kw

5 groups, 10rollers

1-7) heating straighteningmachine

2200x2500mm

1-8) aircooling stralghtening machine

800x2500mm

1-9) the 2nd three-roller haul-off

?250x2500mm

3 groups, 6 rollers

2300mm

ac moter 1.5kw

motor 2kw

1-11) bracket platform

2300x3000

hollow profile board mould

t-dice

dice width 2450mm

core distance: 8mm*11mm*1mm

coat-hanger type mould, board

size: a/b/a 2300x8mm-10mm

core distance: 8mm*11mm*1mm

 

2 oil-hydraulic press

make: qingdao(korea)

year:2016

table:1800*1400mm

stroke:0-190mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
 HOLLOW PLASTIC PROFILE BOARD PRODUCTION LINE MAKE: QINGDAO(KOREA) YEAR:2016 HOLLOW PROFILE BOARD COEXTRUSION PRODUCTION LINE 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W120X33 EQUIPPED WITH VACUUM LOADER -SJU-300KG MOTOR 132KW 60HZ 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W75X33 EQUIPPED WITH VACUUM LOADER -SJU-200KG MOTOR:90KW 60HZ 1-3) HYDRAULIC SCREEN CHANGER MODEL : GD-SSP-150, GD-SSP-100 1-4) HOLLOW PROFILE BOARD MOULD T-DICE COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X4MM-6MM 1-5) SHAPE FORMING MOULD 800MMX2500X80MM 1-6) THE 1ST 5-ROLLER HAUL-OFF 250X2500MM, AC 15 KW 5 GROUPS, 10ROLLERS 1-7) HEATING STRAIGHTENINGMACHINE 2200X2500MM 1-8) AIRCOOLING STRALGHTENING MACHINE 800X2500MM 1-9) THE 2ND THREE-ROLLER HAUL-OFF ?250X2500MM 3 GROUPS, 6 ROLLERS 2300MM AC MOTER 1.5KW MOTOR 2KW 1-11) BRACKET PLATFORM 2300X3000 HOLLOW PROFILE BOARD MOULD T-DICE DICE WIDTH 2450MM CORE DISTANCE: 8MM*11MM*1MM COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X8MM-10MM CORE DISTANCE: 8MM*11MM*1MM 2 OIL-HYDRAULIC PRESS MAKE: QINGDAO(KOREA) YEAR:2016 TABLE:1800*1400MM STROKE:0-190MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-max. 20 kg dough, 3 speeds, security device\r\nbowl + doughhook made from stainless steel, MAX. 20 KG DOUGH, 3 SPEEDS, SECURITY DEVICE\R\NBOWL + DOUGHHOOK MADE FROM STAINLESS STEEL,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hollow plastic profile board production line

 
make: qingdao(korea)

year:2016

hollow profile board coextrusion production line

1-1) single screw extruder :

model : cnu(1)-w120x33

equipped with vacuum loader

-sju-300kg

motor 132kw 60hz

1-1) single screw extruder :

model : cnu(1)-w75x33

equipped with vacuum loader

-sju-200kg

motor:90kw 60hz

1-3) hydraulic screen changer

model : gd-ssp-150, gd-ssp-100

1-4) hollow profile board mould

t-dice

coat-hanger type  mould, board

size: a/b/a 2300x4mm-6mm

1-5) shape forming mould

800mmx2500x80mm

1-6) the 1st 5-roller haul-off

250x2500mm, ac 15 kw

5 groups, 10rollers

1-7) heating straighteningmachine

2200x2500mm

1-8) aircooling stralghtening machine

800x2500mm

1-9) the 2nd three-roller haul-off

?250x2500mm

3 groups, 6 rollers

2300mm

ac moter 1.5kw

motor 2kw

1-11) bracket platform

2300x3000

hollow profile board mould

t-dice

dice width 2450mm

core distance: 8mm*11mm*1mm

coat-hanger type mould, board

size: a/b/a 2300x8mm-10mm

core distance: 8mm*11mm*1mm

 

2 oil-hydraulic press

make: qingdao(korea)

year:2016

table:1800*1400mm

stroke:0-190mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
 HOLLOW PLASTIC PROFILE BOARD PRODUCTION LINE MAKE: QINGDAO(KOREA) YEAR:2016 HOLLOW PROFILE BOARD COEXTRUSION PRODUCTION LINE 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W120X33 EQUIPPED WITH VACUUM LOADER -SJU-300KG MOTOR 132KW 60HZ 1-1) SINGLE SCREW EXTRUDER : MODEL : CNU(1)-W75X33 EQUIPPED WITH VACUUM LOADER -SJU-200KG MOTOR:90KW 60HZ 1-3) HYDRAULIC SCREEN CHANGER MODEL : GD-SSP-150, GD-SSP-100 1-4) HOLLOW PROFILE BOARD MOULD T-DICE COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X4MM-6MM 1-5) SHAPE FORMING MOULD 800MMX2500X80MM 1-6) THE 1ST 5-ROLLER HAUL-OFF 250X2500MM, AC 15 KW 5 GROUPS, 10ROLLERS 1-7) HEATING STRAIGHTENINGMACHINE 2200X2500MM 1-8) AIRCOOLING STRALGHTENING MACHINE 800X2500MM 1-9) THE 2ND THREE-ROLLER HAUL-OFF ?250X2500MM 3 GROUPS, 6 ROLLERS 2300MM AC MOTER 1.5KW MOTOR 2KW 1-11) BRACKET PLATFORM 2300X3000 HOLLOW PROFILE BOARD MOULD T-DICE DICE WIDTH 2450MM CORE DISTANCE: 8MM*11MM*1MM COAT-HANGER TYPE MOULD, BOARD SIZE: A/B/A 2300X8MM-10MM CORE DISTANCE: 8MM*11MM*1MM 2 OIL-HYDRAULIC PRESS MAKE: QINGDAO(KOREA) YEAR:2016 TABLE:1800*1400MM STROKE:0-190MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-continuous quenching furnaces

 1.continuous quenching furnace

make:sht(korea)

cpacity:700kg/hr

1)continuous quenching furnace

continuous mesh roll type

temp.:nor 850 °c, max 950 °c

effective size 650mm x11000mm x200mm(h)

power:380v,290kw(4zone)

2)continuous type quenching furnace

type:continuous mesh

temp.:nor 550 °c, max 750 °c

cpacity:700kg/hr

effective size 800mm x15000mm x250mm(h)

power:380v,290kw(4zone)

3)oil quenching tank

cpacity:20,000l

conveyor size:1000mm(w)

pump: 7.5hp x2

heater:30kw

 

2.continuous quenching furnace

make:sht(korea)

cpacity:500kg/hr

1)continuous quenching furnace

continuous mesh skid rail type

temp.:nor 850 °c, max 950 °c

effective size 600mm (w)

power:380v,216kw(4part)

1zone:84kw 2zone:60kw

3zone:36kw, 4zone:36kw

2)continuous type quenching furnace

type:continuous mesh

temp.:nor 550 °c, max 750 °c

cpacity:500kg/hr

effective size 800mm(w)

power:380v,180kw(4zone)

1zone:55kw 2zone:55kw

3zone:35kw, 4zone:35kw

3)oil quenching tank

cpacity:20,000l

conveyor size:

 pump:

heater

 

3.continuous austempering furnace

make:sht(korea)

cpacity:170kg/hr

1)continuous quenching furnace

continuous mesh  type

quenching temp.:nor 850 °c, max 950 °c

austempering :nor280 °c, max 350 °c

quenching size 450mm (w)x2800mm(l) x1200mm(h)

power:380v,260kw(3part)

1zone:84kw 2zone:60kw

3zone:36kw,

2)tank

aus capacity:3500liter

aus temp:220-330°c 


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567     CONTINUOUS QUENCHING FURNACES 1.CONTINUOUS QUENCHING FURNACE MAKE:SHT(KOREA) CPACITY:700KG/HR 1)CONTINUOUS QUENCHING FURNACE CONTINUOUS MESH ROLL TYPE TEMP.:NOR 850 °C, MAX 950 °C EFFECTIVE SIZE 650MM X11000MM X200MM(H) POWER:380V,290KW(4ZONE) 2)CONTINUOUS TYPE QUENCHING FURNACE TYPE:CONTINUOUS MESH TEMP.:NOR 550 °C, MAX 750 °C CPACITY:700KG/HR EFFECTIVE SIZE 800MM X15000MM X250MM(H) POWER:380V,290KW(4ZONE) 3)OIL QUENCHING TANK CPACITY:20,000L CONVEYOR SIZE:1000MM(W) PUMP: 7.5HP X2 HEATER:30KW 2.CONTINUOUS QUENCHING FURNACE MAKE:SHT(KOREA) CPACITY:500KG/HR 1)CONTINUOUS QUENCHING FURNACE CONTINUOUS MESH SKID RAIL TYPE TEMP.:NOR 850 °C, MAX 950 °C EFFECTIVE SIZE 600MM (W) POWER:380V,216KW(4PART) 1ZONE:84KW 2ZONE:60KW 3ZONE:36KW, 4ZONE:36KW 2)CONTINUOUS TYPE QUENCHING FURNACE TYPE:CONTINUOUS MESH TEMP.:NOR 550 °C, MAX 750 °C CPACITY:500KG/HR EFFECTIVE SIZE 800MM(W) POWER:380V,180KW(4ZONE) 1ZONE:55KW 2ZONE:55KW 3ZONE:35KW, 4ZONE:35KW 3)OIL QUENCHING TANK CPACITY:20,000L CONVEYOR SIZE: PUMP: HEATER 3.CONTINUOUS AUSTEMPERING FURNACE MAKE:SHT(KOREA) CPACITY:170KG/HR 1)CONTINUOUS QUENCHING FURNACE CONTINUOUS MESH TYPE QUENCHING TEMP.:NOR 850 °C, MAX 950 °C AUSTEMPERING :NOR280 °C, MAX 350 °C QUENCHING SIZE 450MM (W)X2800MM(L) X1200MM(H) POWER:380V,260KW(3PART) 1ZONE:84KW 2ZONE:60KW 3ZONE:36KW, 2)TANK AUS CAPACITY:3500LITER AUS TEMP:220-330°C BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-boring mill union bft 105 / 1
year of construction: 1991
power 47kw
footprint 7500 x 5000 mm weight approx. 13900 kg
traverse path x 1750/y1250/z1175 bohrspindel motion w450 table size/load 1250 x 1400 / 4to
b - axis angle any max power 25kw maximum torque 2500 nm 4-2500 rpm 1 rpm tool holder sk50 control tnc 355 BORING MILL UNION BFT 105 / 1 YEAR OF CONSTRUCTION: 1991 POWER 47KW FOOTPRINT 7500 X 5000 MM WEIGHT APPROX. 13900 KG TRAVERSE PATH X 1750/Y1250/Z1175 BOHRSPINDEL MOTION W450 TABLE SIZE/LOAD 1250 X 1400 / 4TO B - AXIS ANGLE ANY MAX POWER 25KW MAXIMUM TORQUE 2500 NM 4-2500 RPM 1 RPM TOOL HOLDER SK50 CONTROL TNC 355
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7460; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7460; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cooling unit dielectric mcw 50b-03 year: 2016
cooling capacity: 5.0 kw
rated power: 2.5 kw
nominal current: 7 a
power supply: 3 x 400 v 10% 50 / 60 hz - 1%
tempraturkontrollbereich 15-50 â° c adjustable
njken
raumtempratur: 10-45 â° c
min. flow: 30 l/min delivery head (horizontal) 40 m
dimensions w x d x h: 450 x 550 x 1040 mm
pipe size: g 3/4 "mm
 COOLING UNIT DIELECTRIC MCW 50B-03 YEAR: 2016 COOLING CAPACITY: 5.0 KW RATED POWER: 2.5 KW NOMINAL CURRENT: 7 A POWER SUPPLY: 3 X 400 V 10% 50 / 60 HZ - 1% TEMPRATURKONTROLLBEREICH 15-50 &ACIRC;&DEG; C ADJUSTABLE NJKEN RAUMTEMPRATUR: 10-45 &ACIRC;&DEG; C MIN. FLOW: 30 L/MIN DELIVERY HEAD (HORIZONTAL) 40 M DIMENSIONS W X D X H: 450 X 550 X 1040 MM PIPE SIZE: G 3/4 "MM
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 17.500 €
Ubicación: Land-; gross weight [kg]: 7435; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7435; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-product number: 1384
type: flow 350
serial number: 04576
year of construction: 2014
capacity: max 120 packages/min.
bag width: 50 - 350 mm
bag length: unlimited
film thickness: 25 - 130 µ
packaged weight: max 10 kg
film width: max 740 mm
power: 230vac, 50hz, 2kw
pneumatics4 - 6 bar, 200 - 400 l/min.dimensions2450 x 1200 x 2200 mmweight700 kg with adjustable supportplate and combination seal
used for bags of 350 mm PRODUCT NUMBER: 1384 TYPE: FLOW 350 SERIAL NUMBER: 04576 YEAR OF CONSTRUCTION: 2014 CAPACITY: MAX 120 PACKAGES/MIN. BAG WIDTH: 50 - 350 MM BAG LENGTH: UNLIMITED FILM THICKNESS: 25 - 130 µ PACKAGED WEIGHT: MAX 10 KG FILM WIDTH: MAX 740 MM POWER: 230VAC, 50HZ, 2KW PNEUMATICS4 - 6 BAR, 200 - 400 L/MIN.DIMENSIONS2450 X 1200 X 2200 MMWEIGHT700 KG WITH ADJUSTABLE SUPPORTPLATE AND COMBINATION SEAL USED FOR BAGS OF 350 MM
Vendedor: Van Zutphen BV
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7450; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7450; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-manufacturer: faraz
type: ka 3.5
year of construction: 2001

max. total weight: 3500 kg
load compartment internal dimensions l x w x h: 4,550 x 2,000 x 2.390 mm

car trailer hitch ball
overrunning brake

wood shelf decor, home-built
vehicle equipment, sheet metal shelf
skylight and fluorescent lamp
230 volt power outlet
270â° rear portal doors

condition of tyres: approx. 60-80%

73450 neresheim price plus 19% vat from site
mistakes and intermediate sale is reserved MANUFACTURER: FARAZ TYPE: KA 3.5 YEAR OF CONSTRUCTION: 2001 MAX. TOTAL WEIGHT: 3500 KG LOAD COMPARTMENT INTERNAL DIMENSIONS L X W X H: 4,550 X 2,000 X 2.390 MM CAR TRAILER HITCH BALL OVERRUNNING BRAKE WOOD SHELF DECOR, HOME-BUILT VEHICLE EQUIPMENT, SHEET METAL SHELF SKYLIGHT AND FLUORESCENT LAMP 230 VOLT POWER OUTLET 270&ACIRC;&DEG; REAR PORTAL DOORS CONDITION OF TYRES: APPROX. 60-80% 73450 NERESHEIM PRICE PLUS 19% VAT FROM SITE MISTAKES AND INTERMEDIATE SALE IS RESERVED
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-; gross weight [kg]: 6450; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6450; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 345.000 PLN
Ubicación: Land-vertical packing machine hsv 101 s flexible
along with the conveyor can be compensated with dildo decentralized drive and flexible control of the machine is welding torch system
the device is completely decentralised structure drive
a wide range of packaging and bulk products easy control and programming
a wide range of optional equipment easy replacement of the tube with flange by means of clamps quick change clamping units effectively set the cut as a sign of low energy consumption
100 memory settings automatic centring film
self diagnostics
a wide range of moulding packaging system easy to connect film
materials combined hot such as pp, paper, pe, etc. 
thermoplastic materials such as pe foil, etc. 
the efficiency of the machine depends on the product to be packaged, packaging material, packaging size and type of measuring device the year of manufacture: 2000

14 head nawa?arka-weight multipond mp 1401-c
 
universal high-precision dispenser multi-head considerations all kinds of bulk products and granulates, for example, such as pasta, candy, nuts, seeds, spices, coffee, cakes, chocolate, frozen food, fr plate, sugar, semolina, bread crumbs, milk, chemical products, semi-finished products, etc.
to 450 odwa?e? per minute in combination mode
 to 540 odwa?e? per minute in the metering mode
 portion weight for an individual throw: up to 500 g
 the possible greater weight in large servings or multiple shot
 maximum accuracy
 fully automatic calibration and tare
 product-specific accessories
 compact water and dust-resistant design
 application: combination, mixing, counting, dosing
maximum accuracy and working time guaranteed by high resolution temperature compensating strain gauges with kalibruj?cymi scales of our implementation. calibration is done automatically according to the preset time intervals while the machine is in operation.
double-open flip flops designed for fast and clean, which is especially beneficial when the difficult and highly viscous products.

all parts contacting with the product are available in many materials such as profiled or smooth plastic or metal to work with different products. these parts are interchangeable and can be removed quickly and easily without the use of tools to clean, change the product or service. 

intelligent automatic control administration eliminates the need for matching machine for the product by the operator. each radial feeder is automatically optimized in order to obtain the highest efficiency of weighting based on the flow of the product.

year of manufacture: 2000
  VERTICAL PACKING MACHINE HSV 101 S FLEXIBLE ALONG WITH THE CONVEYOR CAN BE COMPENSATED WITH DILDO DECENTRALIZED DRIVE AND FLEXIBLE CONTROL OF THE MACHINE IS WELDING TORCH SYSTEM THE DEVICE IS COMPLETELY DECENTRALISED STRUCTURE DRIVE A WIDE RANGE OF PACKAGING AND BULK PRODUCTS EASY CONTROL AND PROGRAMMING A WIDE RANGE OF OPTIONAL EQUIPMENT EASY REPLACEMENT OF THE TUBE WITH FLANGE BY MEANS OF CLAMPS QUICK CHANGE CLAMPING UNITS EFFECTIVELY SET THE CUT AS A SIGN OF LOW ENERGY CONSUMPTION 100 MEMORY SETTINGS AUTOMATIC CENTRING FILM SELF DIAGNOSTICS A WIDE RANGE OF MOULDING PACKAGING SYSTEM EASY TO CONNECT FILM MATERIALS COMBINED HOT SUCH AS PP, PAPER, PE, ETC. THERMOPLASTIC MATERIALS SUCH AS PE FOIL, ETC. THE EFFICIENCY OF THE MACHINE DEPENDS ON THE PRODUCT TO BE PACKAGED, PACKAGING MATERIAL, PACKAGING SIZE AND TYPE OF MEASURING DEVICE THE YEAR OF MANUFACTURE: 2000 14 HEAD NAWA?ARKA-WEIGHT MULTIPOND MP 1401-C UNIVERSAL HIGH-PRECISION DISPENSER MULTI-HEAD CONSIDERATIONS ALL KINDS OF BULK PRODUCTS AND GRANULATES, FOR EXAMPLE, SUCH AS PASTA, CANDY, NUTS, SEEDS, SPICES, COFFEE, CAKES, CHOCOLATE, FROZEN FOOD, FR PLATE, SUGAR, SEMOLINA, BREAD CRUMBS, MILK, CHEMICAL PRODUCTS, SEMI-FINISHED PRODUCTS, ETC. TO 450 ODWA?E? PER MINUTE IN COMBINATION MODE TO 540 ODWA?E? PER MINUTE IN THE METERING MODE PORTION WEIGHT FOR AN INDIVIDUAL THROW: UP TO 500 G THE POSSIBLE GREATER WEIGHT IN LARGE SERVINGS OR MULTIPLE SHOT MAXIMUM ACCURACY FULLY AUTOMATIC CALIBRATION AND TARE PRODUCT-SPECIFIC ACCESSORIES COMPACT WATER AND DUST-RESISTANT DESIGN APPLICATION: COMBINATION, MIXING, COUNTING, DOSING MAXIMUM ACCURACY AND WORKING TIME GUARANTEED BY HIGH RESOLUTION TEMPERATURE COMPENSATING STRAIN GAUGES WITH KALIBRUJ?CYMI SCALES OF OUR IMPLEMENTATION. CALIBRATION IS DONE AUTOMATICALLY ACCORDING TO THE PRESET TIME INTERVALS WHILE THE MACHINE IS IN OPERATION. DOUBLE-OPEN FLIP FLOPS DESIGNED FOR FAST AND CLEAN, WHICH IS ESPECIALLY BENEFICIAL WHEN THE DIFFICULT AND HIGHLY VISCOUS PRODUCTS. ALL PARTS CONTACTING WITH THE PRODUCT ARE AVAILABLE IN MANY MATERIALS SUCH AS PROFILED OR SMOOTH PLASTIC OR METAL TO WORK WITH DIFFERENT PRODUCTS. THESE PARTS ARE INTERCHANGEABLE AND CAN BE REMOVED QUICKLY AND EASILY WITHOUT THE USE OF TOOLS TO CLEAN, CHANGE THE PRODUCT OR SERVICE. INTELLIGENT AUTOMATIC CONTROL ADMINISTRATION ELIMINATES THE NEED FOR MATCHING MACHINE FOR THE PRODUCT BY THE OPERATOR. EACH RADIAL FEEDER IS AUTOMATICALLY OPTIMIZED IN ORDER TO OBTAIN THE HIGHEST EFFICIENCY OF WEIGHTING BASED ON THE FLOW OF THE PRODUCT. YEAR OF MANUFACTURE: 2000
Vendedor: Tiger Job Sp. z o.o.
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-; power [ps]: 78; transmission: hydrostatic; engine: perkins; lift height[mm]: 495; maximum lift capacity [kg]: 4500 ; POWER [PS]: 78; TRANSMISSION: HYDROSTATIC; ENGINE: PERKINS; LIFT HEIGHT[MM]: 495; MAXIMUM LIFT CAPACITY [KG]: 4500
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-1621 lamina bl-laminating machine
max. sheet size: width 1600 mm, length 2000 mm
min. sheet size: width 300 mm, length 300 mm
top sheet 130-450 gm/m2
bottom sheet from 250 gm/m2 is 0.6-10 mm
glue water based adhesive
register accuracy +-0.5 mm
operating speed up to 5500 sheets/hour
automatic top sheet feeder
automatic bottom sheet feeder
precision gluing with automatic glue application
laminating station with automatic front and side registration system
pressure belt
plc control system
hand delivery 1621 LAMINA BL-LAMINATING MACHINE MAX. SHEET SIZE: WIDTH 1600 MM, LENGTH 2000 MM MIN. SHEET SIZE: WIDTH 300 MM, LENGTH 300 MM TOP SHEET 130-450 GM/M2 BOTTOM SHEET FROM 250 GM/M2 IS 0.6-10 MM GLUE WATER BASED ADHESIVE REGISTER ACCURACY +-0.5 MM OPERATING SPEED UP TO 5500 SHEETS/HOUR AUTOMATIC TOP SHEET FEEDER AUTOMATIC BOTTOM SHEET FEEDER PRECISION GLUING WITH AUTOMATIC GLUE APPLICATION LAMINATING STATION WITH AUTOMATIC FRONT AND SIDE REGISTRATION SYSTEM PRESSURE BELT PLC CONTROL SYSTEM HAND DELIVERY
Vendedor: M-Vision
Año de construcción: usado
Precio: 12.800 €
Ubicación: Land-; accessories: maisgebiss ; ACCESSORIES: MAISGEBISS
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type f6l413f

141 kw at 2500 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE F6L413F 141 KW AT 2500 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-x-travel: 900 mm<br/>y-travel: 250 mm<br/>z-travel: 450 mm<br/>turning speed range - horizontal: 50 - 1700 u/min<br/>turning speed range - vertical: 50 - 1700 u/min<br/>milling-head swivable   +/-: 90° <br/>spindle taper iso: 40 <br/>table surface area: 1250 x 250 mm<br/>total power requirement: 4,2 kw<br/>weight of the machine ca.: 1,5 t<br/>dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m<br/>? hydr. vise<br/>? horizontal milling equipment (without steady) with 3 milling spindles<br/><br/><br/><br/> X-TRAVEL: 900 MM
Y-TRAVEL: 250 MM
Z-TRAVEL: 450 MM
TURNING SPEED RANGE - HORIZONTAL: 50 - 1700 U/MIN
TURNING SPEED RANGE - VERTICAL: 50 - 1700 U/MIN
MILLING-HEAD SWIVABLE +/-: 90°
SPINDLE TAPER ISO: 40
TABLE SURFACE AREA: 1250 X 250 MM
TOTAL POWER REQUIREMENT: 4,2 KW
WEIGHT OF THE MACHINE CA.: 1,5 T
DIMENSIONS OF THE MACHINE CA.: 1,2 X 1,5 X 1,8 M
? HYDR. VISE
? HORIZONTAL MILLING EQUIPMENT (WITHOUT STEADY) WITH 3 MILLING SPINDLES



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-used revision needed deutz motor (diesel) type f3m1011f

30 kw at 2400 rpm

we have a large choice of new and used engines. 
please contact us regarding pricing and availability  USED REVISION NEEDED DEUTZ MOTOR (DIESEL) TYPE F3M1011F 30 KW AT 2400 RPM WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-spindle diameter:    150 mm<br/>x travel:  10000 mm<br/>y travel:   6000 mm<br/>--------------------------------------------------:  <br/>basic design:  <br/>- basic design: moving column:        <br/>working range -cubic-:  <br/>- number of processing axes (excl parallel axes):      5  <br/>- .. among of them simultaneous cnc axes:      5  <br/>- x-axis travel:  10000 mm<br/>- y-axis travel:   6000 mm<br/>- z-axis travel:   1500 mm<br/>- w-axis travel:    700 mm<br/>- rotating range b-axis up to:    360 °<br/>floor plate:  <br/>- table surface (left-right):   7000 mm<br/>- table surface (front-back):   4000 mm<br/>table:  <br/>- table surface (left-right):   3000 mm<br/>- table surface (front-back):   2970 mm<br/>- workpiece load (max):  45000 kg<br/>- v-axis travel:   2000 mm<br/>- rotation axis: b:        <br/>- - mode of operation: automatic:        <br/>- - positioning/indexing:  0.001 °<br/>milling spindle / head:  <br/>- spindle diameter:    150 mm<br/>- tool fixture: iso sk 50:        <br/>- drive power:     61 kw<br/>- sleeve stroke:    700 mm<br/>attachments:  <br/>- chip conveyor: yes:        <br/>- coolant unit: yes:        <br/>- band filtration unit: yes:        <br/>- through spindle coolant attachment: yes:        <br/>- european ce standards: yes:        <br/><br/><br/><br/><br/> SPINDLE DIAMETER: 150 MM
X TRAVEL: 10000 MM
Y TRAVEL: 6000 MM
--------------------------------------------------:
BASIC DESIGN:
- BASIC DESIGN: MOVING COLUMN:
WORKING RANGE -CUBIC-:
- NUMBER OF PROCESSING AXES (EXCL PARALLEL AXES): 5
- .. AMONG OF THEM SIMULTANEOUS CNC AXES: 5
- X-AXIS TRAVEL: 10000 MM
- Y-AXIS TRAVEL: 6000 MM
- Z-AXIS TRAVEL: 1500 MM
- W-AXIS TRAVEL: 700 MM
- ROTATING RANGE B-AXIS UP TO: 360 °
FLOOR PLATE:
- TABLE SURFACE (LEFT-RIGHT): 7000 MM
- TABLE SURFACE (FRONT-BACK): 4000 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 3000 MM
- TABLE SURFACE (FRONT-BACK): 2970 MM
- WORKPIECE LOAD (MAX): 45000 KG
- V-AXIS TRAVEL: 2000 MM
- ROTATION AXIS: B:
- - MODE OF OPERATION: AUTOMATIC:
- - POSITIONING/INDEXING: 0.001 °
MILLING SPINDLE / HEAD:
- SPINDLE DIAMETER: 150 MM
- TOOL FIXTURE: ISO SK 50:
- DRIVE POWER: 61 KW
- SLEEVE STROKE: 700 MM
ATTACHMENTS:
- CHIP CONVEYOR: YES:
- COOLANT UNIT: YES:
- BAND FILTRATION UNIT: YES:
- THROUGH SPINDLE COOLANT ATTACHMENT: YES:
- EUROPEAN CE STANDARDS: YES:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-used revision needed deutz motor (diesel) type f4l913

56 kw at 2300 rpm

we have a large choice of new and used engines. 
please contact us regarding pricing and availability.
  USED REVISION NEEDED DEUTZ MOTOR (DIESEL) TYPE F4L913 56 KW AT 2300 RPM WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 700 x 4400 x 1700 mm<br/>description: table length 3000 mm, belt length about 8400 mm WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 4400 X 1700 MM
DESCRIPTION: TABLE LENGTH 3000 MM, BELT LENGTH ABOUT 8400 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type f5l912w

43 kw at 1800 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE F5L912W 43 KW AT 1800 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 2800 x 1400 x 2600 mm<br/>description: lifting capacity 4500 kg. double mast. working hours 12005 WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 2800 X 1400 X 2600 MM
DESCRIPTION: LIFTING CAPACITY 4500 KG. DOUBLE MAST. WORKING HOURS 12005
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BAVELLONI types: