1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-procedures [x x y x z]: 1250 x 880 x 800 mm
number of axles: 3 control: heidenhain tnc 426/430 spindle retainer: hsk a 63 table size x: 1500 mm
table size y: 1050 mm
tool changers: 30 - fold PROCEDURES [X X Y X Z]: 1250 X 880 X 800 MM NUMBER OF AXLES: 3 CONTROL: HEIDENHAIN TNC 426/430 SPINDLE RETAINER: HSK A 63 TABLE SIZE X: 1500 MM TABLE SIZE Y: 1050 MM TOOL CHANGERS: 30 - FOLD
Vendedor: Mac-Tec
Año de construcción: usado
Ubicación: Land-[embed]https://youtu.be/sji9llsak-s[/embed]

<strong>state: machine still working by customer
</strong>

ix-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> [EMBED]HTTPS://YOUTU.BE/SJI9LLSAK-S[/EMBED] STATE: MACHINE STILL WORKING BY CUSTOMER IX-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-min. 1.5 mm diameter range
max 165 mm diameter range
maximum drilling length 406 mm

spindle speeds:
number (step) 12
200 rpm to 2500 rpm

lifting speed:
number (level) 5
80 h / up 310 h/min

connection 50 hz 3 x 380 volt
spindle motor 0.73 kw

machine weight approx. 450 kg
dimensions machine:
lxwxh
1500 mm x 1300 mm x 1600 mm

accessories:
different sizes of honing ahlen ect...
documentation MIN. 1.5 MM DIAMETER RANGE MAX 165 MM DIAMETER RANGE MAXIMUM DRILLING LENGTH 406 MM SPINDLE SPEEDS: NUMBER (STEP) 12 200 RPM TO 2500 RPM LIFTING SPEED: NUMBER (LEVEL) 5 80 H / UP 310 H/MIN CONNECTION 50 HZ 3 X 380 VOLT SPINDLE MOTOR 0.73 KW MACHINE WEIGHT APPROX. 450 KG DIMENSIONS MACHINE: LXWXH 1500 MM X 1300 MM X 1600 MM ACCESSORIES: DIFFERENT SIZES OF HONING AHLEN ECT... DOCUMENTATION
Vendedor: Weyhersmüller GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-chain rb 2,52\r\nregulating range 1-10\r\n  920  -  4,59      m2  121 mkg\r\n             0,459    i1    1,97   12 325\r\n                          i2     322 CHAIN RB 2,52\R\NREGULATING RANGE 1-10\R\N 920 - 4,59 M2 121 MKG\R\N 0,459 I1 1,97 12 325\R\N I2 322
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
technical data

stroke x 610 mm.
    stroke y 460 mm.
    axis z 510 mm (v)
    bt 40 spindle taper
    power mand. 7.5 kw.
    table mm. 950x560
    scope tab. 500 kg.
    fast forward 20 mt/min.
    lav.mt/min.10 feed
    3800 macchinakg weight.

data not binding to obtain/verify date must be
standard equipment

cnc fanuc o-m
    c. ut. 16 pos.

TECHNICAL DATA STROKE X 610 MM. STROKE Y 460 MM. AXIS Z 510 MM (V) BT 40 SPINDLE TAPER POWER MAND. 7.5 KW. TABLE MM. 950X560 SCOPE TAB. 500 KG. FAST FORWARD 20 MT/MIN. LAV.MT/MIN.10 FEED 3800 MACCHINAKG WEIGHT. DATA NOT BINDING TO OBTAIN/VERIFY DATE MUST BE STANDARD EQUIPMENT CNC FANUC O-M C. UT. 16 POS.
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Ubicación: Land-belt width 350 mm, length 2500 mm, 1 motor\r\n BELT WIDTH 350 MM, LENGTH 2500 MM, 1 MOTOR\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
technical data

axis x 800 mm.
    stroke y-axis 510 mm.
    z axis stroke mm. 500 (vert)
    bt 40 spindle taper
    spindle speed rpm. 40-6000
    11 mand.kw engine.
    table mm. 1000x490
    scope table 750 kg.
    machine weight kg 3480
    overall dimensions mm. 2345 2830x2160xh.
    4° axis table hor/vert. jones shipman spindle diameter 200)

data not binding to obtain/verify date must be
standard equipment

cnc heidenhain tnc 410p
    tool changer 22 pos.

TECHNICAL DATA AXIS X 800 MM. STROKE Y-AXIS 510 MM. Z AXIS STROKE MM. 500 (VERT) BT 40 SPINDLE TAPER SPINDLE SPEED RPM. 40-6000 11 MAND.KW ENGINE. TABLE MM. 1000X490 SCOPE TABLE 750 KG. MACHINE WEIGHT KG 3480 OVERALL DIMENSIONS MM. 2345 2830X2160XH. 4° AXIS TABLE HOR/VERT. JONES SHIPMAN SPINDLE DIAMETER 200) DATA NOT BINDING TO OBTAIN/VERIFY DATE MUST BE STANDARD EQUIPMENT CNC HEIDENHAIN TNC 410P TOOL CHANGER 22 POS.
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Ubicación: Land-belt width 365 mm, length 3,8 m, 1 motor\r\nheight input 460, output 1400 mm\r\nvariable speed\r\n BELT WIDTH 365 MM, LENGTH 3,8 M, 1 MOTOR\R\NHEIGHT INPUT 460, OUTPUT 1400 MM\R\NVARIABLE SPEED\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
technical data

stroke x 1300 mm.
    axis y mm. 560
    axis z mm. 620
    table mm. 1420x600
    spindle taper iso 40
    spindle motor kw: 12
    spindle speed 9000 rpm.
    machine weight 7500 kg.

data not binding to obtain/verify date must be
standard equipment

cnc heidenhain
    tool changer 24 pos.
    transp. shavings

TECHNICAL DATA STROKE X 1300 MM. AXIS Y MM. 560 AXIS Z MM. 620 TABLE MM. 1420X600 SPINDLE TAPER ISO 40 SPINDLE MOTOR KW: 12 SPINDLE SPEED 9000 RPM. MACHINE WEIGHT 7500 KG. DATA NOT BINDING TO OBTAIN/VERIFY DATE MUST BE STANDARD EQUIPMENT CNC HEIDENHAIN TOOL CHANGER 24 POS. TRANSP. SHAVINGS
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Ubicación: Land-pressure: 50 t<br/>chamfer lenght: 2050 mm<br/>distance between columns: 1690 mm<br/>column arm: 400 mm<br/>daylight between press beam: 370 mm<br/>stroke of ram: 105 mm<br/>ajustment speed: 85 mm/sec<br/>return speed: 80 mm/sec<br/>pressing speed: 10 mm/sec<br/>table width: 60 mm<br/>main drive: 4,5 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 2,3 x 1,35 x 2,18 m<br/>* cnc control mbc/cybelec dnc 74 for the axes y, x and r <br/>* cnc controlled back gauge (x axis) <br/>* cnc-controlled vertical adjustment of stop finger (r-axis) <br/>* manual adjustment of the stop fingers left-right (z- axis) <br/>* two-hand operating console and footswitch <br/>* upper tool fast clamping <br/>* different tools (punch and die)<br/><br/>machine inspectable at our warehouse.<br/><br/><br/><br/><br/> PRESSURE: 50 T
CHAMFER LENGHT: 2050 MM
DISTANCE BETWEEN COLUMNS: 1690 MM
COLUMN ARM: 400 MM
DAYLIGHT BETWEEN PRESS BEAM: 370 MM
STROKE OF RAM: 105 MM
AJUSTMENT SPEED: 85 MM/SEC
RETURN SPEED: 80 MM/SEC
PRESSING SPEED: 10 MM/SEC
TABLE WIDTH: 60 MM
MAIN DRIVE: 4,5 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 2,3 X 1,35 X 2,18 M
* CNC CONTROL MBC/CYBELEC DNC 74 FOR THE AXES Y, X AND R
* CNC CONTROLLED BACK GAUGE (X AXIS)
* CNC-CONTROLLED VERTICAL ADJUSTMENT OF STOP FINGER (R-AXIS)
* MANUAL ADJUSTMENT OF THE STOP FINGERS LEFT-RIGHT (Z- AXIS)
* TWO-HAND OPERATING CONSOLE AND FOOTSWITCH
* UPPER TOOL FAST CLAMPING
* DIFFERENT TOOLS (PUNCH AND DIE)

MACHINE INSPECTABLE AT OUR WAREHOUSE.




Vendedor: EKW Werkzeugmaschinen AG & Co. KG
Año de construcción: usado
Ubicación: Land-
technical data

stroke x 1000 mm.
    stroke y 500 mm.
    axis z mm. 505
    table mm. 1150x475
    spindle taper iso 40
    7.5 kw spindle motor:
    spindle speed 6000 rpm.
    machine weight 5000 kg.
    power tot. absorbed 15 kva

data not binding to obtain/verify date must be
standard equipment

cnc heidenhain
    tool changer 24 pos.
    transp. shavings

TECHNICAL DATA STROKE X 1000 MM. STROKE Y 500 MM. AXIS Z MM. 505 TABLE MM. 1150X475 SPINDLE TAPER ISO 40 7.5 KW SPINDLE MOTOR: SPINDLE SPEED 6000 RPM. MACHINE WEIGHT 5000 KG. POWER TOT. ABSORBED 15 KVA DATA NOT BINDING TO OBTAIN/VERIFY DATE MUST BE STANDARD EQUIPMENT CNC HEIDENHAIN TOOL CHANGER 24 POS. TRANSP. SHAVINGS
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 900 x 600 x 1500 mm<br/>description: max. pressure 125 psi, power 10 w, never used. WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 900 X 600 X 1500 MM
DESCRIPTION: MAX. PRESSURE 125 PSI, POWER 10 W, NEVER USED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
technical data

stroke x 800 mm.
    stroke y 500 mm.
    axis z mm. 505
    table mm. 950x425
    spindle taper iso 40
    7.5 kw spindle motor:
    spindle speed 6000 rpm.
    machine weight kg 4850
    power tot. absorbed 15 kva

data not binding to obtain/verify date must be
standard equipment

cnc heidenhain
    tool changer 24 pos.
    transp. shavings

TECHNICAL DATA STROKE X 800 MM. STROKE Y 500 MM. AXIS Z MM. 505 TABLE MM. 950X425 SPINDLE TAPER ISO 40 7.5 KW SPINDLE MOTOR: SPINDLE SPEED 6000 RPM. MACHINE WEIGHT KG 4850 POWER TOT. ABSORBED 15 KVA DATA NOT BINDING TO OBTAIN/VERIFY DATE MUST BE STANDARD EQUIPMENT CNC HEIDENHAIN TOOL CHANGER 24 POS. TRANSP. SHAVINGS
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-dimensions (l x w x h) approx.: 900 x 600 x 1500 mm<br/>description: max. pressure 125 psi, power 10 w, never used. DIMENSIONS (L X W X H) APPROX.: 900 X 600 X 1500 MM
DESCRIPTION: MAX. PRESSURE 125 PSI, POWER 10 W, NEVER USED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-vertical machining center
x 800 y500 z600
spindle sk 50 jis 6339 (mas-bt)
tool magazine 30 seats
internal coolant supply with knoll filter system
control msc-501 (fanuc)
 VERTICAL MACHINING CENTER X 800 Y500 Z600 SPINDLE SK 50 JIS 6339 (MAS-BT) TOOL MAGAZINE 30 SEATS INTERNAL COOLANT SUPPLY WITH KNOLL FILTER SYSTEM CONTROL MSC-501 (FANUC)
Vendedor: Coenders Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 390 €
Ubicación: Land-dimensions (l x w x h) approx.: 900 x 600 x 1500 mm<br/>description: max. pressure 125 psi, power 10 w, never used. DIMENSIONS (L X W X H) APPROX.: 900 X 600 X 1500 MM
DESCRIPTION: MAX. PRESSURE 125 PSI, POWER 10 W, NEVER USED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
technical data

stroke x mm: 800
    axis y mm: 510
    axis z mm: 500
    table mm. 1000x490
    scope table kg: 750
    spindle taper iso 40
    spindle motor kw 11
    spindle speed 6000 rpm.
    ut exchange. aut. 40pos
    rotary table with tailstock
    overall dimensions mm. 2400x2200x2570h
    weight 3600 kg.

data not binding to obtain/verify date must be
standard equipment

cnc heidenhain 426 the pb

vertical panel on 4th controlled axis/tailstock nikken divider
 TECHNICAL DATA STROKE X MM: 800 AXIS Y MM: 510 AXIS Z MM: 500 TABLE MM. 1000X490 SCOPE TABLE KG: 750 SPINDLE TAPER ISO 40 SPINDLE MOTOR KW 11 SPINDLE SPEED 6000 RPM. UT EXCHANGE. AUT. 40POS ROTARY TABLE WITH TAILSTOCK OVERALL DIMENSIONS MM. 2400X2200X2570H WEIGHT 3600 KG. DATA NOT BINDING TO OBTAIN/VERIFY DATE MUST BE STANDARD EQUIPMENT CNC HEIDENHAIN 426 THE PB VERTICAL PANEL ON 4TH CONTROLLED AXIS/TAILSTOCK NIKKEN DIVIDER
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-dimensions (l x w x h) approx.: 900 x 600 x 1500 mm<br/>description: max. pressure 125 psi, power 10 w, never used. DIMENSIONS (L X W X H) APPROX.: 900 X 600 X 1500 MM
DESCRIPTION: MAX. PRESSURE 125 PSI, POWER 10 W, NEVER USED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-x-axis stroke = 1820 mm / 2 x 700 mm
y axis stroke = 500 mm
z axis stroke = 480 mm
4th axis rotary / chuck
chuck sk40 din 69871 a
2 x 30 tool changer disc changer tray
1 control panel with cnc - contouring make siemens 840 c.

accessories:
full containment of the machine tool length measurement laser system
manual chuck
chip conveyor cooling plant
extraction with filter

dimensions: (lxwxh) 6.2 m x 2.7 m x 3.2 m X-AXIS STROKE = 1820 MM / 2 X 700 MM Y AXIS STROKE = 500 MM Z AXIS STROKE = 480 MM 4TH AXIS ROTARY / CHUCK CHUCK SK40 DIN 69871 A 2 X 30 TOOL CHANGER DISC CHANGER TRAY 1 CONTROL PANEL WITH CNC - CONTOURING MAKE SIEMENS 840 C. ACCESSORIES: FULL CONTAINMENT OF THE MACHINE TOOL LENGTH MEASUREMENT LASER SYSTEM MANUAL CHUCK CHIP CONVEYOR COOLING PLANT EXTRACTION WITH FILTER DIMENSIONS: (LXWXH) 6.2 M X 2.7 M X 3.2 M
Vendedor: KW Maschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed:652 mm<br/>turning diameter over slide:440 mm<br/>turning length:1500 mm<br/>swing diameter over slide rest:440 mm<br/>bed width:350 mm<br/>spindle bore:80 mm<br/>spindle speed:30-1500 (3 stufig)  u/min<br/>spindle taper:a2-8 <br/>longitudinal feeds::0,05-1,5 <br/>cross feeds::0.025 - 0.752 <br/>tailstock quill stroke:200 mm<br/>tailstock quill diameter:95 mm<br/>tailstock quill taper mt:5 mk<br/>tool post size:25x25 mm<br/>power requirement:7,5 kw<br/>weight of the machine ca.:2250 kg<br/>dimensions:2650x1140x1610 mm<br/>dro:2-achsen von fagor <br/>stepless speed: <br/>fixed steady:option <br/>follower rest:option <br/>tool holder:4-fach <br/>: <br/>rapid travel - longitudinal + cross: <br/>european electric: <br/>ce-design: <br/>3 jaw chuck Ø:315 mm<br/>automatic lubrication system: <br/>chip pan: <br/>coolant system: <br/>: <br/>splash guard:am schlitten mit mikroschalter <br/>: <br/>led work light: <br/>: <br/>dead centers: <br/>reducing bush: <br/>: <br/>right hand appron: <br/><br/>factory new l & z lathe with 2-axis digital display f. constant cutting speed and many more.  characteristics: powerful, flexible and productive with an optimal price / performance ratio for the growing requirements of turning shops, toolmakers and other mechanical plants as well as training centers  warranty: 12 months  payment: 100% before loading the machine  fig. shows dlz 325 with further options  made in europe!   for fixed lump sums, we also offer free delivery, including assembly, commissioning, instruction of the operating personnel as well as ready to hand over the machine. service, spare parts supply, the subsequent supply of accessories is also guaranteed by us.  other accessories and models partly from stock or available at short notice.  benefit from the favorable leasing and hire-purchase conditions of abc leasing: ask us for it. TURNING DIAMETER OVER BED:652 MM
TURNING DIAMETER OVER SLIDE:440 MM
TURNING LENGTH:1500 MM
SWING DIAMETER OVER SLIDE REST:440 MM
BED WIDTH:350 MM
SPINDLE BORE:80 MM
SPINDLE SPEED:30-1500 (3 STUFIG) U/MIN
SPINDLE TAPER:A2-8
LONGITUDINAL FEEDS::0,05-1,5
CROSS FEEDS::0.025 - 0.752
TAILSTOCK QUILL STROKE:200 MM
TAILSTOCK QUILL DIAMETER:95 MM
TAILSTOCK QUILL TAPER MT:5 MK
TOOL POST SIZE:25X25 MM
POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:2250 KG
DIMENSIONS:2650X1140X1610 MM
DRO:2-ACHSEN VON FAGOR
STEPLESS SPEED:
FIXED STEADY:OPTION
FOLLOWER REST:OPTION
TOOL HOLDER:4-FACH
:
RAPID TRAVEL - LONGITUDINAL + CROSS:
EUROPEAN ELECTRIC:
CE-DESIGN:
3 JAW CHUCK Ø:315 MM
AUTOMATIC LUBRICATION SYSTEM:
CHIP PAN:
COOLANT SYSTEM:
:
SPLASH GUARD:AM SCHLITTEN MIT MIKROSCHALTER
:
LED WORK LIGHT:
:
DEAD CENTERS:
REDUCING BUSH:
:
RIGHT HAND APPRON:

FACTORY NEW L & Z LATHE WITH 2-AXIS DIGITAL DISPLAY F. CONSTANT CUTTING SPEED AND MANY MORE. CHARACTERISTICS: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO FOR THE GROWING REQUIREMENTS OF TURNING SHOPS, TOOLMAKERS AND OTHER MECHANICAL PLANTS AS WELL AS TRAINING CENTERS WARRANTY: 12 MONTHS PAYMENT: 100% BEFORE LOADING THE MACHINE FIG. SHOWS DLZ 325 WITH FURTHER OPTIONS MADE IN EUROPE! FOR FIXED LUMP SUMS, WE ALSO OFFER FREE DELIVERY, INCLUDING ASSEMBLY, COMMISSIONING, INSTRUCTION OF THE OPERATING PERSONNEL AS WELL AS READY TO HAND OVER THE MACHINE. SERVICE, SPARE PARTS SUPPLY, THE SUBSEQUENT SUPPLY OF ACCESSORIES IS ALSO GUARANTEED BY US. OTHER ACCESSORIES AND MODELS PARTLY FROM STOCK OR AVAILABLE AT SHORT NOTICE. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US FOR IT.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-technical data:
bj. 1990
x = 7,500 mm
y = 1000 mm
z = 800 mm
cnc control siemens 880 m
60 atc / 60-fach tool changer
3,000 rpm
sk50
2 round table 800 x 800 mm
main spindle motor and feed motors
bosch drehstomtechnik
coolant through spindle
head horizontally and vertically;
rear level freely programmable
documentation / data backup
weight approx. 42 to. TECHNICAL DATA: BJ. 1990 X = 7,500 MM Y = 1000 MM Z = 800 MM CNC CONTROL SIEMENS 880 M 60 ATC / 60-FACH TOOL CHANGER 3,000 RPM SK50 2 ROUND TABLE 800 X 800 MM MAIN SPINDLE MOTOR AND FEED MOTORS BOSCH DREHSTOMTECHNIK COOLANT THROUGH SPINDLE HEAD HORIZONTALLY AND VERTICALLY; REAR LEVEL FREELY PROGRAMMABLE DOCUMENTATION / DATA BACKUP WEIGHT APPROX. 42 TO.
Vendedor: Egon Niehenke Maschinenbau und Vermietung e.K.
Año de construcción: usado
Ubicación: Land-<span style=text-decoration: underline;><strong>less than 10000 working hours. machine will be sold refurbished</strong></span>
<p class=p1><strong>trabel (x,y,z) </strong>500*350*500</p>
<p class=p1><strong>max part: </strong>880*680*350 mm</p>
<p class=p1><strong>table dimmension</strong> 800*360</p>
<p class=p1><strong>weight max part</strong> 800 kg</p>
<p class=p1><strong>electrodes changer </strong>28 positions</p>
<p class=p1><strong>electrode max weight</strong> 10 kg</p>
<p class=p1><strong>axe c</strong></p>
<p class=p1><strong>générateur ipg</strong></p>
<p class=p1><strong>chuck erowa</strong></p>
<p class=p1><strong>fire extinguish ready.</strong></p> LESS THAN 10000 WORKING HOURS. MACHINE WILL BE SOLD REFURBISHED

TRABEL (X,Y,Z) 500*350*500

MAX PART: 880*680*350 MM

TABLE DIMMENSION 800*360

WEIGHT MAX PART 800 KG

ELECTRODES CHANGER 28 POSITIONS

ELECTRODE MAX WEIGHT 10 KG

AXE C

GéNéRATEUR IPG

CHUCK EROWA

FIRE EXTINGUISH READY.

Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-
perfecta circut f from 2004 (4 side cut!) 
 kallfass with kallfass delivery with 600 a trimmer line of size 30 x 44 cm
 option; conveyor tray to trimmer, control panel, size mini. 8 x 10 cm
 max 30 x 44 cm cutting height 9 cm, kallfass wrapmat 600 and standard 600 of 1983, can either cut with 3 x. side or 4 x. side

condition; in very good condition, available immediately
 can be lakes in our factory PERFECTA CIRCUT F FROM 2004 (4 SIDE CUT!) KALLFASS WITH KALLFASS DELIVERY WITH 600 A TRIMMER LINE OF SIZE 30 X 44 CM OPTION; CONVEYOR TRAY TO TRIMMER, CONTROL PANEL, SIZE MINI. 8 X 10 CM MAX 30 X 44 CM CUTTING HEIGHT 9 CM, KALLFASS WRAPMAT 600 AND STANDARD 600 OF 1983, CAN EITHER CUT WITH 3 X. SIDE OR 4 X. SIDE CONDITION; IN VERY GOOD CONDITION, AVAILABLE IMMEDIATELY CAN BE LAKES IN OUR FACTORY
Vendedor: IMPRIMERIE UNAL
Año de construcción: usado
Precio: used machinery auction RESALE 7.400 €
Ubicación: Land-weight approx.: 2158 kg<br/>dimensions (l x w x h) approx.: 3061 x 1397 x 1930 mm<br/>description:  - serial number: 511475083 - working hours: 1,756 hours - engine power: 32,1 kw - water cooling / 4 cylinders - mobile payload: 650 kg - tipping load: 1300 kg - hydraulic pump capacity: 54 l/min - bucket width: 1370 mm - bucket capacity: 0,272 sqm - comes with new front tires WEIGHT APPROX.: 2158 KG
DIMENSIONS (L X W X H) APPROX.: 3061 X 1397 X 1930 MM
DESCRIPTION: - SERIAL NUMBER: 511475083 - WORKING HOURS: 1,756 HOURS - ENGINE POWER: 32,1 KW - WATER COOLING / 4 CYLINDERS - MOBILE PAYLOAD: 650 KG - TIPPING LOAD: 1300 KG - HYDRAULIC PUMP CAPACITY: 54 L/MIN - BUCKET WIDTH: 1370 MM - BUCKET CAPACITY: 0,272 SQM - COMES WITH NEW FRONT TIRES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-mobile punch fa. geka.
good used condition of incl many die.
fully functional. MOBILE PUNCH FA. GEKA. GOOD USED CONDITION OF INCL MANY DIE. FULLY FUNCTIONAL.
Vendedor: Metallbau Schierz GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.700 €
Ubicación: Land-weight approx.: 5000 kg<br/>running hours: 2123 h<br/>loading capacity: 2,5 t<br/>lifting height: 4300 m<br/>fork length of fork lift: 1200 m<br/>overall height: 2160 m<br/>dimensions (l x w x h) approx.: 2500 x 1300 x 2300 mm<br/>description:  - lifting capacity: 2,5 t - lifting height: 4300 mm - fork length: 1200 mm - operating hours 2,123 h - overall height: 2160 mm - serial number: slptlt20we0788084 WEIGHT APPROX.: 5000 KG
RUNNING HOURS: 2123 H
LOADING CAPACITY: 2,5 T
LIFTING HEIGHT: 4300 M
FORK LENGTH OF FORK LIFT: 1200 M
OVERALL HEIGHT: 2160 M
DIMENSIONS (L X W X H) APPROX.: 2500 X 1300 X 2300 MM
DESCRIPTION: - LIFTING CAPACITY: 2,5 T - LIFTING HEIGHT: 4300 MM - FORK LENGTH: 1200 MM - OPERATING HOURS 2,123 H - OVERALL HEIGHT: 2160 MM - SERIAL NUMBER: SLPTLT20WE0788084
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition and fully functional.
control: fanuc 0i-mc
table dimensions: 600 x 300 mm
maximum load: 200 kg
spindle speed: 12000 rpm
spindle power: 5.5 kw
tool clamping: bt30
rapid traverse rate: 48 m / min.
tool magazine: 20 + 1
tool measuring probe renishaw ts27r
chip conveyor
manual
light and sound signal

accessories: tool holder bt30 (many types), 4th axis (controlled by m codes, 0.001 indexing + separate control unit, which allows the use in another cnc machine). clamping cradle for multi-sided machining in the 4th axis including clamping flanges and tailstock, macros, dnc network connection (moxa). THE MACHINE IS IN GOOD TECHNICAL CONDITION AND FULLY FUNCTIONAL. CONTROL: FANUC 0I-MC TABLE DIMENSIONS: 600 X 300 MM MAXIMUM LOAD: 200 KG SPINDLE SPEED: 12000 RPM SPINDLE POWER: 5.5 KW TOOL CLAMPING: BT30 RAPID TRAVERSE RATE: 48 M / MIN. TOOL MAGAZINE: 20 + 1 TOOL MEASURING PROBE RENISHAW TS27R CHIP CONVEYOR MANUAL LIGHT AND SOUND SIGNAL ACCESSORIES: TOOL HOLDER BT30 (MANY TYPES), 4TH AXIS (CONTROLLED BY M CODES, 0.001 INDEXING + SEPARATE CONTROL UNIT, WHICH ALLOWS THE USE IN ANOTHER CNC MACHINE). CLAMPING CRADLE FOR MULTI-SIDED MACHINING IN THE 4TH AXIS INCLUDING CLAMPING FLANGES AND TAILSTOCK, MACROS, DNC NETWORK CONNECTION (MOXA).
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-; power [ps]: 33; gross weight [kg]: 3300 ; POWER [PS]: 33; GROSS WEIGHT [KG]: 3300
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-matsuura horizontal machining center
•	machine type- mc 900 h
•	built year.1996
•	nc control- fanuc 15m
•	x : 920 y: 720  z : 760
•	spindle 11 kw / 4500 obr
•	multi pallet system with 6 pallets (630 x 630 mm )
•	indexing table  0.001
•	atc 100  
•	year 2008-2009. complete geometric retrofit 
 MATSUURA HORIZONTAL MACHINING CENTER • MACHINE TYPE- MC 900 H • BUILT YEAR.1996 • NC CONTROL- FANUC 15M • X : 920 Y: 720 Z : 760 • SPINDLE 11 KW / 4500 OBR • MULTI PALLET SYSTEM WITH 6 PALLETS (630 X 630 MM ) • INDEXING TABLE 0.001 • ATC 100 • YEAR 2008-2009. COMPLETE GEOMETRIC RETROFIT
Vendedor: Machines4metal
Año de construcción: usado
Precio: 900 €
Ubicación: Land-; transmission: sonstige; colour: rot; cargo space dimensions [lxbxh]: 2100x-x- ; TRANSMISSION: SONSTIGE; COLOUR: ROT; CARGO SPACE DIMENSIONS [LXBXH]: 2100X-X-
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-available: end of may 2019

manufacturer: tcg gmbh norte
machine designation: vs 500 speed
year of construction: 2002

machine hour counter: 17.990 h by 04.02.2019

x axis: 2000 mm
for shuttle machining, 2 work rooms: 2 x 775 mm
y axis: 500 mm
z-axis: 500 mm

clamping surface: 2,120 x 550 mm
tool holder: sk40
tool locations: 40 pcs
speed range: 20-7,000 rpm.
accuracy: 0.015 mm

the machine is a pure 3-axis machine and is still in use. the only known deficiency is the defective sensor for indoor cooling.

like, we expect your offer.

the complex can be visited also by prior arrangement. AVAILABLE: END OF MAY 2019 MANUFACTURER: TCG GMBH NORTE MACHINE DESIGNATION: VS 500 SPEED YEAR OF CONSTRUCTION: 2002 MACHINE HOUR COUNTER: 17.990 H BY 04.02.2019 X AXIS: 2000 MM FOR SHUTTLE MACHINING, 2 WORK ROOMS: 2 X 775 MM Y AXIS: 500 MM Z-AXIS: 500 MM CLAMPING SURFACE: 2,120 X 550 MM TOOL HOLDER: SK40 TOOL LOCATIONS: 40 PCS SPEED RANGE: 20-7,000 RPM. ACCURACY: 0.015 MM THE MACHINE IS A PURE 3-AXIS MACHINE AND IS STILL IN USE. THE ONLY KNOWN DEFICIENCY IS THE DEFECTIVE SENSOR FOR INDOOR COOLING. LIKE, WE EXPECT YOUR OFFER. THE COMPLEX CAN BE VISITED ALSO BY PRIOR ARRANGEMENT.
Vendedor: W&T EFRA
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 110<br/>year of construction 2005<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 cbm<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 75 kw<br/>tying system  5-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 16 tons/h<br/>bulk weight of 50 kg/cbm approx. 25 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 850 up to 1.400 kg<br/>hydralicoil 1,200 l<br/>baler dimensions built up with hopper approx.11,750 x 2,250 x 6,690   mm (l x w x h)<br/>transport dimensions only baler approx.11,750 x 2,250 x 3,150   mm (l x w x h)<br/>machine weight baler 36 tons<br/>comments this machine has a 5-fold horizontal binding system for difficult to press materials such as pet bottles and residual waste. in addition, the baler is equipped with a perforator for pet bottles.<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 110
YEAR OF CONSTRUCTION 2005
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 CBM
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 75 KW
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 850 UP TO 1.400 KG
HYDRALICOIL 1,200 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER 36 TONS
COMMENTS THIS MACHINE HAS A 5-FOLD HORIZONTAL BINDING SYSTEM FOR DIFFICULT TO PRESS MATERIALS SUCH AS PET BOTTLES AND RESIDUAL WASTE. IN ADDITION, THE BALER IS EQUIPPED WITH A PERFORATOR FOR PET BOTTLES.
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-control: heidenhain tnc 426
turntable - 4th axis
swivel head
hours of operation: approx. 15,000 hours
including handwheel
procedures:
x: 800 mm
y: 650 mm
w: 550 mm
feed (x, y, z): 10,000 mm / min
eligang: 15 m / min
spindle speed: 6300 rpm
table dimensions: 1100 x 600 mm
maximum table load: 500 kg
tool holder: sk 40
power: 17 / 11, 5kw
machine weight: 6000 kg
machine dimensions: approx. 5500 x 3500 x 3100 mm CONTROL: HEIDENHAIN TNC 426 TURNTABLE - 4TH AXIS SWIVEL HEAD HOURS OF OPERATION: APPROX. 15,000 HOURS INCLUDING HANDWHEEL PROCEDURES: X: 800 MM Y: 650 MM W: 550 MM FEED (X, Y, Z): 10,000 MM / MIN ELIGANG: 15 M / MIN SPINDLE SPEED: 6300 RPM TABLE DIMENSIONS: 1100 X 600 MM MAXIMUM TABLE LOAD: 500 KG TOOL HOLDER: SK 40 POWER: 17 / 11, 5KW MACHINE WEIGHT: 6000 KG MACHINE DIMENSIONS: APPROX. 5500 X 3500 X 3100 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: 79.500 €
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1990<br/>hours of operation 24,319 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled, is in good condition and immediately available. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1990
HOURS OF OPERATION 24,319 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED, IS IN GOOD CONDITION AND IMMEDIATELY AVAILABLE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-omplett new electric - control and motors adtech.
procedures:
x axis: 280 mm
y-axis: 200 mm
z-axis: 250 mm
distance between table and spindle end: 200-400 mm
distance between spindle center and column front: 300 mm
size of the table work area: 500 x 220 mm
maximum load of the table: 70 kg
spindle speed: 6000 rpm
spindle taper: nt 30
spindle power: 3 kw
rapid traverse rate (max): 20 m / min
cutting speed: 5-5000 m / min
werkzeugschaftsystem: bt30
number of tools: 10
max tool diameter: 50 mm
maximum tool length: 200 mm
maximum tool weight / total weight of the tool: 1.5 kg / 12 kg
tool change time: (tool to tool / chip to chip): 1.8 s / 4.0 s
machine weight: 1300 kg
dimensions - required floor space (l x b x h) - at the highest position of the spindle in the z-axis: 1200 x 2430 x 2000 mm
transport height: 1900 mm OMPLETT NEW ELECTRIC - CONTROL AND MOTORS ADTECH. PROCEDURES: X AXIS: 280 MM Y-AXIS: 200 MM Z-AXIS: 250 MM DISTANCE BETWEEN TABLE AND SPINDLE END: 200-400 MM DISTANCE BETWEEN SPINDLE CENTER AND COLUMN FRONT: 300 MM SIZE OF THE TABLE WORK AREA: 500 X 220 MM MAXIMUM LOAD OF THE TABLE: 70 KG SPINDLE SPEED: 6000 RPM SPINDLE TAPER: NT 30 SPINDLE POWER: 3 KW RAPID TRAVERSE RATE (MAX): 20 M / MIN CUTTING SPEED: 5-5000 M / MIN WERKZEUGSCHAFTSYSTEM: BT30 NUMBER OF TOOLS: 10 MAX TOOL DIAMETER: 50 MM MAXIMUM TOOL LENGTH: 200 MM MAXIMUM TOOL WEIGHT / TOTAL WEIGHT OF THE TOOL: 1.5 KG / 12 KG TOOL CHANGE TIME: (TOOL TO TOOL / CHIP TO CHIP): 1.8 S / 4.0 S MACHINE WEIGHT: 1300 KG DIMENSIONS - REQUIRED FLOOR SPACE (L X B X H) - AT THE HIGHEST POSITION OF THE SPINDLE IN THE Z-AXIS: 1200 X 2430 X 2000 MM TRANSPORT HEIGHT: 1900 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-general

project no.: 904980
number: 1 pcs.
manufacturer: sw
type: ba 321
control: siemens 840 d
year of construction: 2012
state of preservation: second-hand machine
machine a (hours): 36.016
spindle a (hours): 14.478

description

milling

travel in x 300 mm
travel in y 450 mm
travel in z 375 mm
tool holder hsk-a63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 32 / - kw
maximum torque at ed 10-40 / 100% 72 / - nm
horizontally arranged 2 pcs. spindle/n
spindle distance 300 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 40 stations
max tool diameter 70 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 275 mm
maximum tool weight 7.5 kg
swivel unit nc-controlled
2 pcs. nc-controlled rotary table
rotary table diameter 220 mm
hydraulic clamping
1 additional / -r clamping circuit (s)
pneumatic work piece control

more facilities

ir workpiece measuring probes
tool breakage monitoring artis
tool time monitoring with sister tool management
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
scratch band chip conveyor (new)
internal coolant supply
coolant system with paper band filter (new)
high pressure pump (new) 70 bar
interface for automatic loading using bela de portal or robot
machine status light

general technical data

machine dimensions (lxwxh) approx. 2450 x 3800 x 4300 mm

comment

there are a total of 4 machines available!

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904980 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA 321 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2012 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 36.016 SPINDLE A (HOURS): 14.478 DESCRIPTION MILLING TRAVEL IN X 300 MM TRAVEL IN Y 450 MM TRAVEL IN Z 375 MM TOOL HOLDER HSK-A63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 32 / - KW MAXIMUM TORQUE AT ED 10-40 / 100% 72 / - NM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 300 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 40 STATIONS MAX TOOL DIAMETER 70 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 275 MM MAXIMUM TOOL WEIGHT 7.5 KG SWIVEL UNIT NC-CONTROLLED 2 PCS. NC-CONTROLLED ROTARY TABLE ROTARY TABLE DIAMETER 220 MM HYDRAULIC CLAMPING 1 ADDITIONAL / -R CLAMPING CIRCUIT (S) PNEUMATIC WORK PIECE CONTROL MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE MONITORING ARTIS TOOL TIME MONITORING WITH SISTER TOOL MANAGEMENT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA SCRATCH BAND CHIP CONVEYOR (NEW) INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER (NEW) HIGH PRESSURE PUMP (NEW) 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MACHINE STATUS LIGHT GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 2450 X 3800 X 4300 MM COMMENT THERE ARE A TOTAL OF 4 MACHINES AVAILABLE! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 140<br/>year of construction 2003<br/>working hours 39,542 h<br/>press power main press 140 tons<br/>press power of pre-press 70 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 4,34 cbm<br/>theoretic cycle time 16 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 2 x 75 kw<br/>connected load 209 kw<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 30 tons/h<br/>bulk weight of 50 kg/cbm approx. 46 tons/h<br/>bulk weight of 100 kg/cbm approx. 82 tons/h<br/>bale weight 850 up to 1.500 kg<br/>hydraulicoil 2,300 l<br/>baler dimensions built up with hopper approx. 13,200 x 2,750 x 5,020 mm (l x w x h)<br/>transport dimensions only baler approx. 13,200 x 2,750 x 3,400 mm (l x w x h)<br/>machine weight baler 47 tons<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 140
YEAR OF CONSTRUCTION 2003
WORKING HOURS 39,542 H
PRESS POWER MAIN PRESS 140 TONS
PRESS POWER OF PRE-PRESS 70 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 4,34 CBM
THEORETIC CYCLE TIME 16 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 75 KW
CONNECTED LOAD 209 KW
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 46 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 82 TONS/H
BALE WEIGHT 850 UP TO 1.500 KG
HYDRAULICOIL 2,300 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 13,200 X 2,750 X 5,020 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 13,200 X 2,750 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER 47 TONS

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-general

project no.: 904982
number: 1 pcs.
manufacturer: sw
type: ba 322
control: siemens 840 d
year of construction: 2012
state of preservation: second-hand machine
machine a (hours): 36,000
spindle a (hours): 17,000

description

milling

travel in x 300 mm
travel in y 450 mm
travel in z 375 mm
tool holder hsk-a63
maximum speed milling spindle 10000 1/min
maximum power with ed 10-40 / 100% 32 / - kw
maximum torque at ed 10-40 / 100% 72 / - nm
horizontally arranged 2 pcs. spindle/n
spindle distance 300 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine stations
max tool diameter 70 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 275 mm
maximum tool weight 7.5 kg
workpiece change table 2 fold
2 stk. swivel unit nc-controlled
hydraulic clamping
2 additional / -r clamping circuit (s)

more facilities

tool breakage monitoring artis
tool time monitoring with sister tool management
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
scratch band chip conveyor (new)
internal coolant supply
coolant system with paper band filter (new)
high pressure pump (new) 70 bar
interface for automatic loading using bela de portal or robot
machine status light

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904982 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA 322 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2012 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 36,000 SPINDLE A (HOURS): 17,000 DESCRIPTION MILLING TRAVEL IN X 300 MM TRAVEL IN Y 450 MM TRAVEL IN Z 375 MM TOOL HOLDER HSK-A63 MAXIMUM SPEED MILLING SPINDLE 10000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 32 / - KW MAXIMUM TORQUE AT ED 10-40 / 100% 72 / - NM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 300 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE STATIONS MAX TOOL DIAMETER 70 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 275 MM MAXIMUM TOOL WEIGHT 7.5 KG WORKPIECE CHANGE TABLE 2 FOLD 2 STK. SWIVEL UNIT NC-CONTROLLED HYDRAULIC CLAMPING 2 ADDITIONAL / -R CLAMPING CIRCUIT (S) MORE FACILITIES TOOL BREAKAGE MONITORING ARTIS TOOL TIME MONITORING WITH SISTER TOOL MANAGEMENT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA SCRATCH BAND CHIP CONVEYOR (NEW) INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER (NEW) HIGH PRESSURE PUMP (NEW) 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MACHINE STATUS LIGHT COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 100 k<br/>year of construction 2000<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 720 mm<br/>driving motor 75 kw<br/>tying system 5 fold vertical, 3 fold horizontal, fully automated<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx.. 16 tons/h<br/>bulk weight of 50 kg/cbm  approx.. 25 tons/h<br/>bulk weight of 100 kg/cbm  approx.. 47 tons/h<br/>bale weight 550 up to 880 kg, depends on material and bale lenght<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch<br/>baler dimensions built up with hopper 11,750 x 2,250 x 6,690 mm (l x w x h)<br/>transport dimensions only baler 11.750 x 2.250 x 3.150 mm (l x w x h)<br/>machine weight baler approx. 35 tons<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 100 K
YEAR OF CONSTRUCTION 2000
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 720 MM
DRIVING MOTOR 75 KW
TYING SYSTEM 5 FOLD VERTICAL, 3 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX.. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX.. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX.. 47 TONS/H
BALE WEIGHT 550 UP TO 880 KG, DEPENDS ON MATERIAL AND BALE LENGHT
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH
BALER DIMENSIONS BUILT UP WITH HOPPER 11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 11.750 X 2.250 X 3.150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 35 TONS

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 118.000 €
Ubicación: Land-salam 
we sale a isobaric pet filler bc tribloc 40/50/8 in verry good condition,
for soft drink year 2000,  40 rinser , 50 filler , 8 capper arol. for pet bottles pco 1810 (pco col 28mm) with format 0.33 litre,1 litre, 1.5 litre, 2 litre.   
can be see in production.   SALAM WE SALE A ISOBARIC PET FILLER BC TRIBLOC 40/50/8 IN VERRY GOOD CONDITION, FOR SOFT DRINK YEAR 2000, 40 RINSER , 50 FILLER , 8 CAPPER AROL. FOR PET BOTTLES PCO 1810 (PCO COL 28MM) WITH FORMAT 0.33 LITRE,1 LITRE, 1.5 LITRE, 2 LITRE. CAN BE SEE IN PRODUCTION.
Vendedor: LPFC SRL
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 100 af<br/>year of construction 1995<br/>working hours 23.304 h<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 cbm<br/>theoretic cycle time 22 sec.<br/>bale size 1,100 x 720 mm (w x h) length adjustable<br/>driving motor 75 kw<br/>tying system  5-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 12 tons/h<br/>bulk weight of 50 kg/cbm approx. 25 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 550 up to 800 kg<br/>hydraulicoil 1,200 l<br/>baler dimensions built up with hopper approx. 11,750 x 2,250 x 6,690   mm (l x w x h)<br/>transport dimensions only baler approx. 11,750 x 2,250 x 3,150   mm (l x w x h)<br/>machine weight baler 35 tons<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 100 AF
YEAR OF CONSTRUCTION 1995
WORKING HOURS 23.304 H
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 CBM
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 1,100 X 720 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 75 KW
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 12 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 550 UP TO 800 KG
HYDRAULICOIL 1,200 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER 35 TONS

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 70 €
Ubicación: Land-ibc containers 1000 litres capacity IBC CONTAINERS 1000 LITRES CAPACITY
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 140 k<br/>year of construction 1999<br/>working hours 83,877 hours<br/>press power main press 140 tons<br/>press power of pre-press 70 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 4,34 cbm<br/>theoretic cycle time 16 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 2 x 75 kw<br/>connected load 209 kw<br/>tying system 5 fold vertical, 5 fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 30 tons/h<br/>bulk weight of 50 kg/cbm approx. 46 tons/h<br/>bulk weight of 100 kg/cbm approx. 82 tons/h<br/>bale weight 850 up to 1,500 kg<br/>baler dimensions built up with hopper approx.13,200 x 2,750 x 5,020    mm (l x w x h)<br/>transport dimensions only baler approx.1,200 x 2,750 x 3,400 mm (l x w x h)<br/>machine weight baler approx. 43 tons<br/> <br/>comments: one of the two pumps is defective. the plc has already been renewed and replaced with a schneider magnelis touch panel. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.<br/>documentation (manual, ce, electr./hydr.-drawings, etc.) the technical documentation is complete. MANUFACTURER BOLLEGRAAF
TYPE HBC 140 K
YEAR OF CONSTRUCTION 1999
WORKING HOURS 83,877 HOURS
PRESS POWER MAIN PRESS 140 TONS
PRESS POWER OF PRE-PRESS 70 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 4,34 CBM
THEORETIC CYCLE TIME 16 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 75 KW
CONNECTED LOAD 209 KW
TYING SYSTEM 5 FOLD VERTICAL, 5 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 46 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 82 TONS/H
BALE WEIGHT 850 UP TO 1,500 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.13,200 X 2,750 X 5,020 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.1,200 X 2,750 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 43 TONS

COMMENTS: ONE OF THE TWO PUMPS IS DEFECTIVE. THE PLC HAS ALREADY BEEN RENEWED AND REPLACED WITH A SCHNEIDER MAGNELIS TOUCH PANEL. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS, ETC.) THE TECHNICAL DOCUMENTATION IS COMPLETE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-cnc railway control 3 axles, siemens 810
42 x tool changer
procedures; x = 1800, y = 560, z = quill stroke: 300 mm.
spindle speed: 30-4000 rpm.
tool holder: sk 40.
router table surface: 2 piece 900 x 550 mm.
incl. coolant system with internal coolant, electr. remote control,
full cabin and full documentation.
shuttle machining possible.
weight: approx. 9000 kg.
good working condition.
the machine can be seen under power and is immediately available.  CNC RAILWAY CONTROL 3 AXLES, SIEMENS 810 42 X TOOL CHANGER PROCEDURES; X = 1800, Y = 560, Z = QUILL STROKE: 300 MM. SPINDLE SPEED: 30-4000 RPM. TOOL HOLDER: SK 40. ROUTER TABLE SURFACE: 2 PIECE 900 X 550 MM. INCL. COOLANT SYSTEM WITH INTERNAL COOLANT, ELECTR. REMOTE CONTROL, FULL CABIN AND FULL DOCUMENTATION. SHUTTLE MACHINING POSSIBLE. WEIGHT: APPROX. 9000 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 50 af<br/>year of construction 1997 / 2018 overhauled<br/>hours of operation 31,914 hours<br/>press power main press 55 tons<br/>specific press capacity 6,25 kg/cm²<br/>press power of pre-press 25 tons<br/>feed channel 1,320 x 1,100 mm (l x w)<br/>capacity per cycle time 2,45 cbm<br/>theoretic cycle time 30 sec.<br/>bale size 1,100 x 800 mm (w x h) length adjustable<br/>driving motor 45 kw<br/>tying system 5-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 5,5 t/h<br/>bulk weight of 50 kg/cbm approx.12 t/h<br/>bulk weight of 100 kg/cbm approx. 20 t/h<br/>bale weight 380 up to 750 kg<br/>hydraulicoil 900 l<br/>transport dimensions only baler approx. 9,468 x 2,125 x 2,695  mm (l x w x h)<br/>machine weight baler approx. 20 tons<br/>comments the baler was overhauled and tested in 2018, is in good condition and ready for immediate operation.<br/>a inspection under power is possible by appointment. we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 50 AF
YEAR OF CONSTRUCTION 1997 / 2018 OVERHAULED
HOURS OF OPERATION 31,914 HOURS
PRESS POWER MAIN PRESS 55 TONS
SPECIFIC PRESS CAPACITY 6,25 KG/CM²
PRESS POWER OF PRE-PRESS 25 TONS
FEED CHANNEL 1,320 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 2,45 CBM
THEORETIC CYCLE TIME 30 SEC.
BALE SIZE 1,100 X 800 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 45 KW
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 5,5 T/H
BULK WEIGHT OF 50 KG/CBM APPROX.12 T/H
BULK WEIGHT OF 100 KG/CBM APPROX. 20 T/H
BALE WEIGHT 380 UP TO 750 KG
HYDRAULICOIL 900 L
TRANSPORT DIMENSIONS ONLY BALER APPROX. 9,468 X 2,125 X 2,695 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 20 TONS
COMMENTS THE BALER WAS OVERHAULED AND TESTED IN 2018, IS IN GOOD CONDITION AND READY FOR IMMEDIATE OPERATION.
A INSPECTION UNDER POWER IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-complete used  ice cream plant  & ice cream line

ice cream cups , capacity per hour
200cs/hr
ice cream cones, capacity per hour
250cs/hr 
ice cream stick line capacity per hour ?
300cs/hr crunch


production equipment

•           ice-cream freezers – tetra pak hoyer 'kf 1000 n. 1997, tetra pak hoyer 'kf
•           1150 n' 1997 and hoyer 'kf 1150xc'
•           ice-cream stick line (6 lanes) - simampolo, year: 2012
•           ice cream bulk filling machine - omari 2014
•           cup & cone filling machine (2 lanes) - gp  2003
•           ice-cream cup filling machine
•           hardening tunnel
•           ice cream flavor swirler
•           metal detector -loma 'iq2', loma 'iq3'1998
•           drum mobile stainless steel mixer
•           (2) tape dispensers - better packages, '333'
•           heat exchanger & pump -apv
laboratory equipment
•           water bath -memmert 'wb14'
•           viscometer -brookfield 'dv1+'
•           hand refractometers –atago.
•           refractometer - atago 'pr301' COMPLETE USED ICE CREAM PLANT & ICE CREAM LINE ICE CREAM CUPS , CAPACITY PER HOUR 200CS/HR ICE CREAM CONES, CAPACITY PER HOUR 250CS/HR ICE CREAM STICK LINE CAPACITY PER HOUR ? 300CS/HR CRUNCH PRODUCTION EQUIPMENT • ICE-CREAM FREEZERS – TETRA PAK HOYER 'KF 1000 N. 1997, TETRA PAK HOYER 'KF • 1150 N' 1997 AND HOYER 'KF 1150XC' • ICE-CREAM STICK LINE (6 LANES) - SIMAMPOLO, YEAR: 2012 • ICE CREAM BULK FILLING MACHINE - OMARI 2014 • CUP & CONE FILLING MACHINE (2 LANES) - GP 2003 • ICE-CREAM CUP FILLING MACHINE • HARDENING TUNNEL • ICE CREAM FLAVOR SWIRLER • METAL DETECTOR -LOMA 'IQ2', LOMA 'IQ3'1998 • DRUM MOBILE STAINLESS STEEL MIXER • (2) TAPE DISPENSERS - BETTER PACKAGES, '333' • HEAT EXCHANGER & PUMP -APV LABORATORY EQUIPMENT • WATER BATH -MEMMERT 'WB14' • VISCOMETER -BROOKFIELD 'DV1+' • HAND REFRACTOMETERS –ATAGO. • REFRACTOMETER - ATAGO 'PR301' "PALETTE" • GLASS HUMIDIFIERS. • FUME HOOD -SAFELAB AND LABCRAFT 'AIR XIS BRIS SAC' • EYE-WASH & SHOWER STATION • STAINLESS STEEL LABORATORY OVEN -MEMMERT 'INB 500' AND MEMMERT 'UNB 500' CONVEYORS • INCLINED BELT CONVEYORS • BELT CONVEYORS • ROLLER CONVEYOR AND GRAVITY-TYPE ROLLER CONVEYORS TANKS • STAINLESS STEEL ELEVATED MIXING TANK - APV • STAINLESS STEEL HOT WATER TANK • (2) HORIZONTAL ST STEEL PALM OIL TANK - 1000MM DIA X 1500MM LONG AND 1000MM DIA X 1500MM • PALM OIL MIXING TANK - 1800MM DIA X 1500MM HIGH • STAINLESS STEEL DE-CHLORINISED WATER TANK - 1800MM X 1600MM • STAINLESS STEEL JACKETED HOT WATER TANK - 1800MM DIA X 1600MM • STAINLESS STEEL HYDRATION TANKS - 1500MM DIA X 1400MM HIGH • CONDENSATE RETURN TANK - 1600MM DIA X 1400MM PLANT SUPPORT EQUIPMENT • COOLING TOWER • CHILLED WATER HEAT EXCHANGER - ALFA LAVAL 'M10 BWFG' • EVAPORATIVE CONDENSERS -EVAPCO AND DESCA 'CFRC 042' • DEMOUNTABLE CHILLER ROOM • (2) STEEL LOADING DOCKS - 2250MM X 2400MM • INFLATABLE DOCK SHELTER • (2) CHILLERS - INSUFLEX • AIR HANDLING UNIT - TRANE 'DWAA 1008 HA 4 A' WAREHOUSING • BOLTLESS STEEL RACKING • PALLET TRUCK & PLATFORM TROLLEY –EUROLIFTER PLEASE ASK FOR MORE PICTURES FOR FACTORY/ WE TRANSFER AND EQUIPMENT LIST DOCUMENTS ICE-CREAM STICK LINE (6 LANES) - SIMAMPOLO, YEAR:2012, C/W LAIF WRAPPER; JAMIE INK JET PRINTER; CARTON SEALING M/C MODEL EXC 103 SD; BELT CONVEYOR ; OPERATOR PLATFORM PHOTOS ARE ATTACHED
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-x-travel: 3000 mm<br/>y-travel: 1600 mm<br/>z-travel: 2250 mm<br/>control: siemens 840 d <br/>spindle diameter: 130 mm<br/>spindle motor: 37 kw<br/>turning speeds: 8000 u/min<br/>feed: 24 m/min<br/>b-axis: 0,001 °<br/>table load: 6000 kg<br/>type of pallet-changer: 2-fach <br/>size of pallet: 1250x1600 mm<br/>tool change unit: 136-fach <br/>tool taper: iso 50 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>internal coolant:  <br/>swarf conveyor:  <br/><br/><br/><br/><br/> X-TRAVEL: 3000 MM
Y-TRAVEL: 1600 MM
Z-TRAVEL: 2250 MM
CONTROL: SIEMENS 840 D
SPINDLE DIAMETER: 130 MM
SPINDLE MOTOR: 37 KW
TURNING SPEEDS: 8000 U/MIN
FEED: 24 M/MIN
B-AXIS: 0,001 °
TABLE LOAD: 6000 KG
TYPE OF PALLET-CHANGER: 2-FACH
SIZE OF PALLET: 1250X1600 MM
TOOL CHANGE UNIT: 136-FACH
TOOL TAPER: ISO 50
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
INTERNAL COOLANT:
SWARF CONVEYOR:




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 325 €
Ubicación: Land-manufacturer: pepperl and fuchs
smart transmitter supply - new
type: kfd2-stc4-ex2
 
attention!
we have the best prices on the market and many other parts from pepperl and fuchs. buy more than 1 piece, there is still a great discount.

new!
the part was bought from a spare parts warehouse of a company and is completely new.
we give you a functional guarantee for 6 months. should the unit fail, we will replace it with a new one or refund the purchase price.

technical data
abcs://abc.pepperl-fuchs.com/austria/at/classid_7.htm?view=productdetails&prodid=75015 MANUFACTURER: PEPPERL AND FUCHS SMART TRANSMITTER SUPPLY - NEW TYPE: KFD2-STC4-EX2 ATTENTION! WE HAVE THE BEST PRICES ON THE MARKET AND MANY OTHER PARTS FROM PEPPERL AND FUCHS. BUY MORE THAN 1 PIECE, THERE IS STILL A GREAT DISCOUNT. NEW! THE PART WAS BOUGHT FROM A SPARE PARTS WAREHOUSE OF A COMPANY AND IS COMPLETELY NEW. WE GIVE YOU A FUNCTIONAL GUARANTEE FOR 6 MONTHS. SHOULD THE UNIT FAIL, WE WILL REPLACE IT WITH A NEW ONE OR REFUND THE PURCHASE PRICE. TECHNICAL DATA ABCS://ABC.PEPPERL-FUCHS.COM/AUSTRIA/AT/CLASSID_7.HTM?VIEW=PRODUCTDETAILS&PRODID=75015
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 5100 x 4350 x 2900 mm<br/>description: serial number 1681-10-00, workpiece length from 300 mm, maximum workpiece dimensions 1250 x 700 mm (width x height), maximum feed speed 14 m/min, parts of the machine: <, br>, 1 - cmb tc-13/30 motorized belt conveyor, length 3000 mm and useful width 1300 mm, motor power 0.37 kw<br> 2 - magazine station for air bubble plastic coils, capacity for 2 upper coils with a maximum width of 1800 mm and 2 lower ones with a maximum width of 1500 mm, maximum coil diameter approx. 900 mm<br> 3 - welding head cmb ebc-180/70 with pneumatic drive, adjustable head temperature, maximum cutting width 1800 mm, maximum passage height 700 mm<br> 4 - integral transport unit cmb ti-12/250, length 930 mm and useful width 1250 mm, central belt width 180 mm<br> 5 - automatic wrapping station with rotating wheel for stretchable film cmb erl-150, inner diameter of the wheel 1500 mm, adjustable wheel rotation speed, adjustable start and end of the rotation with respect to the workpiece, motor power 3 kw, maximum passage height 700 mm, maximum coil length 250 mm, maximum coil diameter 250 mm<br> 6 - cmb tc-13/10 motorized belt conveyor, length 1000 mm and useful width 1300 mm, motor power 0.37 kw<br> 7 - roller conveyor, length 2560 mm, roller width 1060 mm, see the photos WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 5100 X 4350 X 2900 MM
DESCRIPTION: SERIAL NUMBER 1681-10-00, WORKPIECE LENGTH FROM 300 MM, MAXIMUM WORKPIECE DIMENSIONS 1250 X 700 MM (WIDTH X HEIGHT), MAXIMUM FEED SPEED 14 M/MIN, PARTS OF THE MACHINE: <, BR>, 1 - CMB TC-13/30 MOTORIZED BELT CONVEYOR, LENGTH 3000 MM AND USEFUL WIDTH 1300 MM, MOTOR POWER 0.37 KW
2 - MAGAZINE STATION FOR AIR BUBBLE PLASTIC COILS, CAPACITY FOR 2 UPPER COILS WITH A MAXIMUM WIDTH OF 1800 MM AND 2 LOWER ONES WITH A MAXIMUM WIDTH OF 1500 MM, MAXIMUM COIL DIAMETER APPROX. 900 MM
3 - WELDING HEAD CMB EBC-180/70 WITH PNEUMATIC DRIVE, ADJUSTABLE HEAD TEMPERATURE, MAXIMUM CUTTING WIDTH 1800 MM, MAXIMUM PASSAGE HEIGHT 700 MM
4 - INTEGRAL TRANSPORT UNIT CMB TI-12/250, LENGTH 930 MM AND USEFUL WIDTH 1250 MM, CENTRAL BELT WIDTH 180 MM
5 - AUTOMATIC WRAPPING STATION WITH ROTATING WHEEL FOR STRETCHABLE FILM CMB ERL-150, INNER DIAMETER OF THE WHEEL 1500 MM, ADJUSTABLE WHEEL ROTATION SPEED, ADJUSTABLE START AND END OF THE ROTATION WITH RESPECT TO THE WORKPIECE, MOTOR POWER 3 KW, MAXIMUM PASSAGE HEIGHT 700 MM, MAXIMUM COIL LENGTH 250 MM, MAXIMUM COIL DIAMETER 250 MM
6 - CMB TC-13/10 MOTORIZED BELT CONVEYOR, LENGTH 1000 MM AND USEFUL WIDTH 1300 MM, MOTOR POWER 0.37 KW
7 - ROLLER CONVEYOR, LENGTH 2560 MM, ROLLER WIDTH 1060 MM, SEE THE PHOTOS
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BC types: