41 ofertas

Año de construcción: usado
Ubicación: Land-high speed press:

producer: mabu
stroke power 500 kn (50 tons)
year 09/98 / beckhoff control 2017
machine in mint condition with new beckhoff control
made in germany

stroke adjustment (hub): 7-60 mm

strokes per minute 80-500 spm

four pillar

table dimension is 740 x 565 mm.

side passage width 330 mm.

including two servo feeders:
zehnder & sommer ev 12 ak (2 stk.)

including two soprem decoiler and recoiler


weight cca. 4 ton
motor 5.5 kw
on stock more high speed presses bruderer.
 HIGH SPEED PRESS: PRODUCER: MABU STROKE POWER 500 KN (50 TONS) YEAR 09/98 / BECKHOFF CONTROL 2017 MACHINE IN MINT CONDITION WITH NEW BECKHOFF CONTROL MADE IN GERMANY STROKE ADJUSTMENT (HUB): 7-60 MM STROKES PER MINUTE 80-500 SPM FOUR PILLAR TABLE DIMENSION IS 740 X 565 MM. SIDE PASSAGE WIDTH 330 MM. INCLUDING TWO SERVO FEEDERS: ZEHNDER & SOMMER EV 12 AK (2 STK.) INCLUDING TWO SOPREM DECOILER AND RECOILER WEIGHT CCA. 4 TON MOTOR 5.5 KW ON STOCK MORE HIGH SPEED PRESSES BRUDERER.
Vendedor: Silicon plus
Año de construcción: usado
Precio: 119.000 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-4-axis

*** free from june 2019 ***

x: 6010 mm
y: 2010 mm
z: 450 mm
a-axis: +/-90 °
forward speed: 25 m / min
rapid traverse rate: 25 m / min
table size: 6010 x 2010 mm
vacuum table: 12 sectors 1000 x 1000 mm
vacuum pump: bush ra02555 d503 dijz 2 pcs
speed range: 30,000 rpm
spindle retainer: hsk f63
spindle drive: 15 kw
spindle reckerth: mspf150/150 * 380, 30/15/fbp/hsk f63
tool changers: 18 fold
tool length scanning
control: hsc-6000 (beckhoff twincat)
manual control unit
3d infrared touch probe: omp 40-2, 2
spindle hours: 8200 h
program run: 9800 h
machine: 18500 h
ups - uninterruptible power: control
total power: 20 kw
machine weight: 10800 kg
dimensions (w x d x h): 9.0 x 5.0 x 2.95 m

condition: mint condition, very well maintained machine, to 95% plastic was processed

accessories: 
replacement spindle reckerth
cooling water recooler 2.5 kw for spindle cooling hyfra type chilly 25s
minimal quantity lubrication type ufs 20-003 controled by skf, lubrication type ufs 20-003 smart d1-m08
15 automatically retractable and monitored stop pins controlable via auxiliary function 4-AXIS *** FREE FROM JUNE 2019 *** X: 6010 MM Y: 2010 MM Z: 450 MM A-AXIS: +/-90 ° FORWARD SPEED: 25 M / MIN RAPID TRAVERSE RATE: 25 M / MIN TABLE SIZE: 6010 X 2010 MM VACUUM TABLE: 12 SECTORS 1000 X 1000 MM VACUUM PUMP: BUSH RA02555 D503 DIJZ 2 PCS SPEED RANGE: 30,000 RPM SPINDLE RETAINER: HSK F63 SPINDLE DRIVE: 15 KW SPINDLE RECKERTH: MSPF150/150 * 380, 30/15/FBP/HSK F63 TOOL CHANGERS: 18 FOLD TOOL LENGTH SCANNING CONTROL: HSC-6000 (BECKHOFF TWINCAT) MANUAL CONTROL UNIT 3D INFRARED TOUCH PROBE: OMP 40-2, 2 SPINDLE HOURS: 8200 H PROGRAM RUN: 9800 H MACHINE: 18500 H UPS - UNINTERRUPTIBLE POWER: CONTROL TOTAL POWER: 20 KW MACHINE WEIGHT: 10800 KG DIMENSIONS (W X D X H): 9.0 X 5.0 X 2.95 M CONDITION: MINT CONDITION, VERY WELL MAINTAINED MACHINE, TO 95% PLASTIC WAS PROCESSED ACCESSORIES: REPLACEMENT SPINDLE RECKERTH COOLING WATER RECOOLER 2.5 KW FOR SPINDLE COOLING HYFRA TYPE CHILLY 25S MINIMAL QUANTITY LUBRICATION TYPE UFS 20-003 CONTROLED BY SKF, LUBRICATION TYPE UFS 20-003 SMART D1-M08 15 AUTOMATICALLY RETRACTABLE AND MONITORED STOP PINS CONTROLABLE VIA AUXILIARY FUNCTION
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: 78.610 €
Ubicación: Land-: 1.500 x 3.000 mm<br/>: 30 - 130 a<br/>: . 4.650 ca mm<br/>: . 4.300 ca mm<br/>: . 1.920 ca mm<br/>: 5.100 ~  kg<br/>hyperformance plasma power source hypertherm hpr 130 with ",true hole", technology<br/>plasma ignition consol <br/>command torch height control <br/>cnc control beckhoff<br/>lantek software with auto nesting<br/>control of filter unit by cnc <br/>remote control diagnostic by ethernet <br/>spare parts starting kit <br/>cutting plate alignment function <br/>user manual in german and english<br/><br/><br/>options:<br/> <br/>automatic gas console  ? 2.710,-<br/><br/>torch brake away system ? 2.640 ,-<br/><br/>suction with filter unit  ? 12.460,-<br/><br/><br/>working area: 1.500 x 3.000 mm <br/>plasma source: hypertherm hpr 130 <br/>evacuation: incl.<br/>capacity: mild steel max. 38 mm, mild steel (production pierce) 32 mm <br/>amps: 30 - 130 a <br/>max. cutting speed: 12 m/min. <br/>positioning speed: 35 m/min. <br/>positioning accuracy: +/- 0.1 mm <br/>repeat accuracy: 0.1 mm <br/>length: approx. 4.650 mm <br/>width: approx. 4.300 mm <br/>heigth: approx. 1.920 mm <br/>measurements without filter unit<br/>weight: ~ 5.100 kg<br/><br/><br/><br/> : 1.500 X 3.000 MM
: 30 - 130 A
: . 4.650 CA MM
: . 4.300 CA MM
: . 1.920 CA MM
: 5.100 ~ KG
HYPERFORMANCE PLASMA POWER SOURCE HYPERTHERM HPR 130 WITH ",TRUE HOLE", TECHNOLOGY
PLASMA IGNITION CONSOL 
COMMAND TORCH HEIGHT CONTROL
CNC CONTROL BECKHOFF
LANTEK SOFTWARE WITH AUTO NESTING
CONTROL OF FILTER UNIT BY CNC 
REMOTE CONTROL DIAGNOSTIC BY ETHERNET
SPARE PARTS STARTING KIT
CUTTING PLATE ALIGNMENT FUNCTION
USER MANUAL IN GERMAN AND ENGLISH


OPTIONS:

AUTOMATIC GAS CONSOLE  ? 2.710,-

TORCH BRAKE AWAY SYSTEM ? 2.640 ,-

SUCTION WITH FILTER UNIT  ? 12.460,-


WORKING AREA: 1.500 X 3.000 MM
PLASMA SOURCE: HYPERTHERM HPR 130
EVACUATION: INCL.
CAPACITY: MILD STEEL MAX. 38 MM, MILD STEEL (PRODUCTION PIERCE) 32 MM
AMPS: 30 - 130 A
MAX. CUTTING SPEED: 12 M/MIN.
POSITIONING SPEED: 35 M/MIN.
POSITIONING ACCURACY: +/- 0.1 MM
REPEAT ACCURACY: 0.1 MM
LENGTH: APPROX. 4.650 MM
WIDTH: APPROX. 4.300 MM
HEIGTH: APPROX. 1.920 MM
MEASUREMENTS WITHOUT FILTER UNIT
WEIGHT: ~ 5.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-ref.-no. 00508
manufacturers like
model transfercenter xt525
year of manufacture 2010
hours of operation under 1000 h
beckhoff control
	
technical data dimensions with units wide base machine 2800 mm
wide automation 1270mm
4800 mm long base machine
height 3100 mm fairing (without extraction)
weight (without any workpieces/tools)
with automation of 22,000 kg
23700 kg workspaces linear axis x axis 630 mm
y axis 1300mm
z axis 300mm
 REF.-NO. 00508 MANUFACTURERS LIKE MODEL TRANSFERCENTER XT525 YEAR OF MANUFACTURE 2010 HOURS OF OPERATION UNDER 1000 H BECKHOFF CONTROL TECHNICAL DATA DIMENSIONS WITH UNITS WIDE BASE MACHINE 2800 MM WIDE AUTOMATION 1270MM 4800 MM LONG BASE MACHINE HEIGHT 3100 MM FAIRING (WITHOUT EXTRACTION) WEIGHT (WITHOUT ANY WORKPIECES/TOOLS) WITH AUTOMATION OF 22,000 KG 23700 KG WORKSPACES LINEAR AXIS X AXIS 630 MM Y AXIS 1300MM Z AXIS 300MM
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-single sided edge banding machine
brand: ima
type: compact pc-6220 f
year: 2000

left hand machine
workpiece transport via a driven transport chain and adjustable top pressure
beckhoff control

need of space lxwxh mm: 7400x1500x2000mm
weight: approx. 3600kg

technical data:

edge material:
a) veneer/coil and strip ware,
b) pvc/coil and strip ware
c) solid wood strips

min. edge height = approx. 14 mm
max. edge height = approx. 55 mm
min. edge tickness = approx. 0,4 mm
max. edge thickness = approx. 20 mm
min. panel thickness = approx. 10 mm
min. panel thickness = approx. 16 mm at use of the multi function unit
max. panel thickness = approx. 50 mm
min. panel width = appprox . 60 mm
min. panel length = approx. 150 mm
max. strips = approx. 20x50 mm

panel supernatant from the chain conveyor = approx. 35 mm

pneumatic connection: approx. 7 - 8 bar

the basic machine of the ima-compact-pc consisting of:
a) basic frame as well as housing for electro installation
b) drive for the workpiece transport via mechanical controllable gear motor, feed speed approx. 8-20 m/min. (not the same as the working speed)
c) conveyor chain (80 mm wide + 60 mm long chain plates)
d) top pressure equipped with: 2 rows of rubber coated rollers, height adjustment (approx. 50 mm) central via handwheel
e) imatronic 121 sps control with central unit and control panel; brand beckhoff
f)  electro installation en, switch components in basic frame, operating elements in a separate control panel.
i) movable supporting rail approx. 700 mm for wide workpieces

line voltage: 3/n/pe, 400/230 v, 50 hz, +6/-10%
with resilient neutral wire
zeroing (fi circuit breaker just allowed with a pulse current-sensitive ground fault interrupter)
at order the information of the electro data sheet are relevant! differences have to be additionally offered (extra charge).
(if the line voltage can not be kept a voltage stabilizer need to be installed at the expense of the machine operator)
control voltage: 24 v dc / 230 v ac

lacquering:
- basic machine with hoods: grey white ral 9002 structure
- units: dust grey ral 7037 strukture u. smooth
- safety covers: signal red ral 301 structure
- motors: black ral 9005 silk-matt

adjustment via nc axis: horizontal adjustable, unheated infeed fence, pressure zone, flush milling, multi function unit, profile scraper

pre-milling unit for milling the edge/calibrating of formated workpieces or for milling of side grooves, chamfers or profiles, controllable, not swivable, without tracing, with 2 motors á 3 kw, 400 v, 200 hz, 12000 rpm, working flow in working and counter working direction, without profile tool, with 1 single suction hood Ø 120 mm, with static frequency inverter, horizontal and verticale adjustment with mechanical digital display, with blowing nozzle for the removal of loose particles from the workpiece surface and ir-heater.

gluing unit with closed oil-bath gear, temperature control with separate glue roller drive and 1 main pressure roller

hot melt application 0,8 l compl. with heating cartridge and suplly plug max. edge height 50 mm

single roller/strip magazine, feeding angle 8° for coil material up to 3 mm and strips up to 20 mm, end cutter pneumatic controlled, up to 3 mm edge thickness, max. edge cross sectional area 120 qmm, incl. restraint device for the coil ware, max. coilØ 860mm

5 re-pressure rollers with mech. digital display, pressure rollers single seitlich sprung and adjustbale on side.

end trimming unit
2 motors á 660 w, 400 v, 200 hz., 12000 rpm, installed on top pressure for the end trimming of the frontal and rear edge or strip supernatant,
for flush or chamfer cuts
with 2 hm-end trimming saw blades 160 x 22 mm z=48,
min. panel supernatant: approx. 30 mm + max. edge or strip thickness
min. panel length: approx. 150 mm
min. distance between 2 workpieces approx. 650 mm
max. working speed: 20 m/min.
frontal-/rear edge tracing shoe movable
max. edge height 55 mm ,max. edge thickness 20 mm
hor. pneum. swivable device 0+10°
with pneumatical movable side tracing,
manual positionable via digital display, 
static frequency inverter for motors >0,75 up to 1,5 kw, incl. filter and brake resistance power supply 3-phase, 400-480 v, +/-5%, 50/60 hz

milling unit for flush milling from top and bottom, for 2 motors á 1850 w, 400 v, 200 hz, 12000 rpm
max. approx. 3 degrees swivable (at workpiece thickness over 25 mm), with height tracing, without side tracing, motors ordered one above the other, without tool, with mechanical digital display 09 for the vertical adjustment, with single suction studs

motor with hsk-tool holder, working in counter direction

statical frequency changer for motors ?2,2 up to 4.0 kw, incl. filter and brake resistance power supply 3-phase, 400-480 v, +/-5%, 50/60 hz

sound absorbing/safety hood for end trimming and milling unit, suction studs lx100 und 2x80 to the top,

multi funct SINGLE SIDED EDGE BANDING MACHINE BRAND: IMA TYPE: COMPACT PC-6220 F YEAR: 2000 LEFT HAND MACHINE WORKPIECE TRANSPORT VIA A DRIVEN TRANSPORT CHAIN AND ADJUSTABLE TOP PRESSURE BECKHOFF CONTROL NEED OF SPACE LXWXH MM: 7400X1500X2000MM WEIGHT: APPROX. 3600KG TECHNICAL DATA: EDGE MATERIAL: A) VENEER/COIL AND STRIP WARE, B) PVC/COIL AND STRIP WARE C) SOLID WOOD STRIPS MIN. EDGE HEIGHT = APPROX. 14 MM MAX. EDGE HEIGHT = APPROX. 55 MM MIN. EDGE TICKNESS = APPROX. 0,4 MM MAX. EDGE THICKNESS = APPROX. 20 MM MIN. PANEL THICKNESS = APPROX. 10 MM MIN. PANEL THICKNESS = APPROX. 16 MM AT USE OF THE MULTI FUNCTION UNIT MAX. PANEL THICKNESS = APPROX. 50 MM MIN. PANEL WIDTH = APPPROX . 60 MM MIN. PANEL LENGTH = APPROX. 150 MM MAX. STRIPS = APPROX. 20X50 MM PANEL SUPERNATANT FROM THE CHAIN CONVEYOR = APPROX. 35 MM PNEUMATIC CONNECTION: APPROX. 7 - 8 BAR THE BASIC MACHINE OF THE IMA-COMPACT-PC CONSISTING OF: A) BASIC FRAME AS WELL AS HOUSING FOR ELECTRO INSTALLATION B) DRIVE FOR THE WORKPIECE TRANSPORT VIA MECHANICAL CONTROLLABLE GEAR MOTOR, FEED SPEED APPROX. 8-20 M/MIN. (NOT THE SAME AS THE WORKING SPEED) C) CONVEYOR CHAIN (80 MM WIDE + 60 MM LONG CHAIN PLATES) D) TOP PRESSURE EQUIPPED WITH: 2 ROWS OF RUBBER COATED ROLLERS, HEIGHT ADJUSTMENT (APPROX. 50 MM) CENTRAL VIA HANDWHEEL E) IMATRONIC 121 SPS CONTROL WITH CENTRAL UNIT AND CONTROL PANEL; BRAND BECKHOFF F) ELECTRO INSTALLATION EN, SWITCH COMPONENTS IN BASIC FRAME, OPERATING ELEMENTS IN A SEPARATE CONTROL PANEL. I) MOVABLE SUPPORTING RAIL APPROX. 700 MM FOR WIDE WORKPIECES LINE VOLTAGE: 3/N/PE, 400/230 V, 50 HZ, +6/-10% WITH RESILIENT NEUTRAL WIRE ZEROING (FI CIRCUIT BREAKER JUST ALLOWED WITH A PULSE CURRENT-SENSITIVE GROUND FAULT INTERRUPTER) AT ORDER THE INFORMATION OF THE ELECTRO DATA SHEET ARE RELEVANT! DIFFERENCES HAVE TO BE ADDITIONALLY OFFERED (EXTRA CHARGE). (IF THE LINE VOLTAGE CAN NOT BE KEPT A VOLTAGE STABILIZER NEED TO BE INSTALLED AT THE EXPENSE OF THE MACHINE OPERATOR) CONTROL VOLTAGE: 24 V DC / 230 V AC LACQUERING: - BASIC MACHINE WITH HOODS: GREY WHITE RAL 9002 STRUCTURE - UNITS: DUST GREY RAL 7037 STRUKTURE U. SMOOTH - SAFETY COVERS: SIGNAL RED RAL 301 STRUCTURE - MOTORS: BLACK RAL 9005 SILK-MATT ADJUSTMENT VIA NC AXIS: HORIZONTAL ADJUSTABLE, UNHEATED INFEED FENCE, PRESSURE ZONE, FLUSH MILLING, MULTI FUNCTION UNIT, PROFILE SCRAPER PRE-MILLING UNIT FOR MILLING THE EDGE/CALIBRATING OF FORMATED WORKPIECES OR FOR MILLING OF SIDE GROOVES, CHAMFERS OR PROFILES, CONTROLLABLE, NOT SWIVABLE, WITHOUT TRACING, WITH 2 MOTORS á 3 KW, 400 V, 200 HZ, 12000 RPM, WORKING FLOW IN WORKING AND COUNTER WORKING DIRECTION, WITHOUT PROFILE TOOL, WITH 1 SINGLE SUCTION HOOD Ø 120 MM, WITH STATIC FREQUENCY INVERTER, HORIZONTAL AND VERTICALE ADJUSTMENT WITH MECHANICAL DIGITAL DISPLAY, WITH BLOWING NOZZLE FOR THE REMOVAL OF LOOSE PARTICLES FROM THE WORKPIECE SURFACE AND IR-HEATER. GLUING UNIT WITH CLOSED OIL-BATH GEAR, TEMPERATURE CONTROL WITH SEPARATE GLUE ROLLER DRIVE AND 1 MAIN PRESSURE ROLLER HOT MELT APPLICATION 0,8 L COMPL. WITH HEATING CARTRIDGE AND SUPLLY PLUG MAX. EDGE HEIGHT 50 MM SINGLE ROLLER/STRIP MAGAZINE, FEEDING ANGLE 8° FOR COIL MATERIAL UP TO 3 MM AND STRIPS UP TO 20 MM, END CUTTER PNEUMATIC CONTROLLED, UP TO 3 MM EDGE THICKNESS, MAX. EDGE CROSS SECTIONAL AREA 120 QMM, INCL. RESTRAINT DEVICE FOR THE COIL WARE, MAX. COILØ 860MM 5 RE-PRESSURE ROLLERS WITH MECH. DIGITAL DISPLAY, PRESSURE ROLLERS SINGLE SEITLICH SPRUNG AND ADJUSTBALE ON SIDE. END TRIMMING UNIT 2 MOTORS á 660 W, 400 V, 200 HZ., 12000 RPM, INSTALLED ON TOP PRESSURE FOR THE END TRIMMING OF THE FRONTAL AND REAR EDGE OR STRIP SUPERNATANT, FOR FLUSH OR CHAMFER CUTS WITH 2 HM-END TRIMMING SAW BLADES 160 X 22 MM Z=48, MIN. PANEL SUPERNATANT: APPROX. 30 MM + MAX. EDGE OR STRIP THICKNESS MIN. PANEL LENGTH: APPROX. 150 MM MIN. DISTANCE BETWEEN 2 WORKPIECES APPROX. 650 MM MAX. WORKING SPEED: 20 M/MIN. FRONTAL-/REAR EDGE TRACING SHOE MOVABLE MAX. EDGE HEIGHT 55 MM ,MAX. EDGE THICKNESS 20 MM HOR. PNEUM. SWIVABLE DEVICE 0+10° WITH PNEUMATICAL MOVABLE SIDE TRACING, MANUAL POSITIONABLE VIA DIGITAL DISPLAY, STATIC FREQUENCY INVERTER FOR MOTORS >0,75 UP TO 1,5 KW, INCL. FILTER AND BRAKE RESISTANCE POWER SUPPLY 3-PHASE, 400-480 V, +/-5%, 50/60 HZ MILLING UNIT FOR FLUSH MILLING FROM TOP AND BOTTOM, FOR 2 MOTORS á 1850 W, 400 V, 200 HZ, 12000 RPM MAX. APPROX. 3 DEGREES SWIVABLE (AT WORKPIECE THICKNESS OVER 25 MM), WITH HEIGHT TRACING, WITHOUT SIDE TRACING, MOTORS ORDERED ONE ABOVE THE OTHER, WITHOUT TOOL, WITH MECHANICAL DIGITAL DISPLAY 09 FOR THE VERTICAL ADJUSTMENT, WITH SINGLE SUCTION STUDS MOTOR WITH HSK-TOOL HOLDER, WORKING IN COUNTER DIRECTION STATICAL FREQUENCY CHANGER FOR MOTORS ?2,2 UP TO 4.0 KW, INCL. FILTER AND BRAKE RESISTANCE POWER SUPPLY 3-PHASE, 400-480 V, +/-5%, 50/60 HZ SOUND ABSORBING/SAFETY HOOD FOR END TRIMMING AND MILLING UNIT, SUCTION STUDS LX100 UND 2X80 TO THE TOP, MULTI FUNCT
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overview:
brand: ermaksan
model: fibermak momentum gen-3
application type: laser cutting
machine type: fiber laser cutting machine
availability: immediately
construction year: 2014
production hours: 17317
location: turkey
origin country: turkey

general data:
measurements width: 3180 mm
measurements depth: 8935 mm
measurements height: 2325 mm
machine weight: 11200 kg

main drive:
laser brand: ybettrium laser system
laser power: 2000 kw
laser type: ipg 

control unit:
brand: beckhoff
cnc main language: english
cnc language customizable: yes

movement:
x-axis movement: 3050 mm
y-axis movement: 1530 mm
z-axis movement: 150 mm

workpiece:
workpiece x: 3000 mm
workpiece y: 1500mm
workpiece weight: 1500 kg

max- material thickness:
steel: 16 mm
stainless steel: 8 mm
aluminum: 8 mm

media:
mian electronic connection: 400 v
power consumption: 30 kw

additional equipment:
dust collector

see full technical specifications of this machine at:
abc://bit.ly/2oahsl8
 OVERVIEW: BRAND: ERMAKSAN MODEL: FIBERMAK MOMENTUM GEN-3 APPLICATION TYPE: LASER CUTTING MACHINE TYPE: FIBER LASER CUTTING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2014 PRODUCTION HOURS: 17317 LOCATION: TURKEY ORIGIN COUNTRY: TURKEY GENERAL DATA: MEASUREMENTS WIDTH: 3180 MM MEASUREMENTS DEPTH: 8935 MM MEASUREMENTS HEIGHT: 2325 MM MACHINE WEIGHT: 11200 KG MAIN DRIVE: LASER BRAND: YBETTRIUM LASER SYSTEM LASER POWER: 2000 KW LASER TYPE: IPG CONTROL UNIT: BRAND: BECKHOFF CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MOVEMENT: X-AXIS MOVEMENT: 3050 MM Y-AXIS MOVEMENT: 1530 MM Z-AXIS MOVEMENT: 150 MM WORKPIECE: WORKPIECE X: 3000 MM WORKPIECE Y: 1500MM WORKPIECE WEIGHT: 1500 KG MAX- MATERIAL THICKNESS: STEEL: 16 MM STAINLESS STEEL: 8 MM ALUMINUM: 8 MM MEDIA: MIAN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 30 KW ADDITIONAL EQUIPMENT: DUST COLLECTOR SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2OAHSL8
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 29.900 €
Ubicación: Land-single sided edge banding machine\r\nbrand: ott\r\ntype: xm 2510 f\r\nyear: 2006\r\nright hand machine\r\n\r\nfor banding and processing :\r\nveneer, plastic and massive edges.\r\nedge thickness: 0,2 - 25 mm\r\n\r\ntechnical data: \r\n\r\nworkpiece dimensions:\r\nwidth min.: 70 mm\r\nheight min.: 8 mm\r\nheight max.: 60 mm\r\nlenght min.: 150 mm\r\nfeed speed: 10- 20 m/min - stepless\r\nworking height: 880 mm\r\ncompressed air supply: 6 bar 1 / 4 \r\n\r\nmachine dimensions:\r\nmachine height: 1.500 mm\r\nmachine width: 1.250 mm\r\nmachine length: 9.850 mm\r\nmachine weight: approx. 5.200 kg\r\n\r\nmachine equipped with:\r\n- double roller top pressure with electronical positioning\r\n- pneumat. control of all units from the central touch screen operation via beckhoff industry pc\r\n\r\n- cm - combimelt - gluing system:\r\nsuitable for the process of eva and pur hot melt as well as all usual cleaning granulates. several kind of glues with several working parameters (like dosing volume, pre-melting and working temperatures) are processable via individual working programs. \r\nbasic equipment: tank 2,5 l with filling pipe\r\n\r\ncontrol system\r\n- operation/control via a 15 inch coloured-touch-monitor, unlimited number of working programs alphanumeric memorizable, with several preselections for the processing units as well as working parameters for combi-melt - gluing system for full automatization and max. operation comfort. single frequency inverter for the individual switch of single processing motors.\r\n- hole recognition for blank out of cnc processings, cuts and similar steps (up to a route of 80mm) \r\n- network-compatible\r\n\r\nprocessing units\r\npremilling for process of chip board with 2 hf motors 2 x 3,0 kw, 12000 n, in working- and counter-working direction, distance controlled\r\n\r\nedge magazine for the automatical supply of strip edges with spiked rollers feed and pneumat. pressure beams. inclusive optical edge monitoring\r\nautomatical coil magazine\r\nautomatical stop of coil feed\r\n\r\nend trimming unit with 2 hf motors 250 hz, 14000 n, motors and saw blades pneumatical swivable via selector switch at operation panel or via program integration\r\n\r\nflush milling unit with 2 hf motors á 1,9 kw, 12000 n, 200 hz, for edge thickness up to 25 mm.\r\n\r\nmilling unit for fine or chamfer milling of massive edges, plastic and veneer edges,  chamfer depth adjustment  via program control 0-3 mm stepless. cleaning spindle function for rough milled massive wood edges with fine correction via operation panel with 2 hf-motors 0,75 kw, 250 hz, 14000n, 0 - 45 ° swivable, tracing on 2-sides.\r\n\r\nmillling unit for upper and lower lengthwise milling of radii on plastic, pvc and wood edges. with tracing on 2 sides and pneumatical postitioning via the control programm. with 2 hf-motors 0,4 kw 250 hz/14000 n, with fix tilt of  working spindles - 25° -.\r\n\r\nscraping unit\r\n\r\ncontour trimming with two separate working spindles for top or bottom. for the radius processing of frontal and rear fronts or postforming process. milling heads equipped with two automatical adjustable axes for depth and front adjustment as well with automatical edge thickness adjustment. detailed adjustments in processing programs memorizable.\r\n\r\nflat scraping unit with fine tracing device for hot melt rests remove in the area of joint with suction.\r\n\r\nrs cleaning set with 4 -fold spraying devices and fine buffing units for cleaning the surface\r\n- as - antistatic spraying device 2 fold, on glued joint\r\n\r\nuniversal milling unit\r\nfor grooving, rebating, profiling, with 1 hf-motor 3,5 kw, 150 hz, 8500 n, 30 mm spindle diameter 0 - 90° swivable, either in working or counter working direction. use control for fronts or sides via operator guidance - without tools.\r\n\r\nuniversal milling unit\r\nfor grooving, rebating, profiling, with 1 hf-motor 3,5 kw, 150 hz, 8500 n, 30 mm spindle diameter 0 - 90° swivable, either in working or counter working direction. use control for fronts or sides via operator guidance - without tools.\r\n\r\nautomat. lubrification\r\nheated infeed fence\r\n2-fold-magazine, automatical coil supply stop, for feed of each one edge coil with 800 and 400 mm diameter. with automatical change of coils via the operation panel.\r\n\r\nspecials:\r\nthe gluing height will be risen on a max. panel thickness of 65 mm. the standard process in the area of end trimming lengthwise process - milling and both scraping units are considered. on 65 mm thick panel materials max. 1 mm pvc edges should be processed. therefore a hold-down, back-moving device and cutting system is changed.\r\n\r\nautomatical contour trimming and rough milling unit can only process a panel thickness of 60 mm \r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: OTT\R\NTYPE: XM 2510 F\R\NYEAR: 2006\R\NRIGHT HAND MACHINE\R\N\R\NFOR BANDING AND PROCESSING :\R\NVENEER, PLASTIC AND MASSIVE EDGES.\R\NEDGE THICKNESS: 0,2 - 25 MM\R\N\R\NTECHNICAL DATA: \R\N\R\NWORKPIECE DIMENSIONS:\R\NWIDTH MIN.: 70 MM\R\NHEIGHT MIN.: 8 MM\R\NHEIGHT MAX.: 60 MM\R\NLENGHT MIN.: 150 MM\R\NFEED SPEED: 10- 20 M/MIN - STEPLESS\R\NWORKING HEIGHT: 880 MM\R\NCOMPRESSED AIR SUPPLY: 6 BAR 1 / 4 \R\N\R\NMACHINE DIMENSIONS:\R\NMACHINE HEIGHT: 1.500 MM\R\NMACHINE WIDTH: 1.250 MM\R\NMACHINE LENGTH: 9.850 MM\R\NMACHINE WEIGHT: APPROX. 5.200 KG\R\N\R\NMACHINE EQUIPPED WITH:\R\N- DOUBLE ROLLER TOP PRESSURE WITH ELECTRONICAL POSITIONING\R\N- PNEUMAT. CONTROL OF ALL UNITS FROM THE CENTRAL TOUCH SCREEN OPERATION VIA BECKHOFF INDUSTRY PC\R\N\R\N- CM - COMBIMELT - GLUING SYSTEM:\R\NSUITABLE FOR THE PROCESS OF EVA AND PUR HOT MELT AS WELL AS ALL USUAL CLEANING GRANULATES. SEVERAL KIND OF GLUES WITH SEVERAL WORKING PARAMETERS (LIKE DOSING VOLUME, PRE-MELTING AND WORKING TEMPERATURES) ARE PROCESSABLE VIA INDIVIDUAL WORKING PROGRAMS. \R\NBASIC EQUIPMENT: TANK 2,5 L WITH FILLING PIPE\R\N\R\NCONTROL SYSTEM\R\N- OPERATION/CONTROL VIA A 15 INCH COLOURED-TOUCH-MONITOR, UNLIMITED NUMBER OF WORKING PROGRAMS ALPHANUMERIC MEMORIZABLE, WITH SEVERAL PRESELECTIONS FOR THE PROCESSING UNITS AS WELL AS WORKING PARAMETERS FOR COMBI-MELT - GLUING SYSTEM FOR FULL AUTOMATIZATION AND MAX. OPERATION COMFORT. SINGLE FREQUENCY INVERTER FOR THE INDIVIDUAL SWITCH OF SINGLE PROCESSING MOTORS.\R\N- HOLE RECOGNITION FOR BLANK OUT OF CNC PROCESSINGS, CUTS AND SIMILAR STEPS (UP TO A ROUTE OF 80MM) \R\N- NETWORK-COMPATIBLE\R\N\R\NPROCESSING UNITS\R\NPREMILLING FOR PROCESS OF CHIP BOARD WITH 2 HF MOTORS 2 X 3,0 KW, 12000 N, IN WORKING- AND COUNTER-WORKING DIRECTION, DISTANCE CONTROLLED\R\N\R\NEDGE MAGAZINE FOR THE AUTOMATICAL SUPPLY OF STRIP EDGES WITH SPIKED ROLLERS FEED AND PNEUMAT. PRESSURE BEAMS. INCLUSIVE OPTICAL EDGE MONITORING\R\NAUTOMATICAL COIL MAGAZINE\R\NAUTOMATICAL STOP OF COIL FEED\R\N\R\NEND TRIMMING UNIT WITH 2 HF MOTORS 250 HZ, 14000 N, MOTORS AND SAW BLADES PNEUMATICAL SWIVABLE VIA SELECTOR SWITCH AT OPERATION PANEL OR VIA PROGRAM INTEGRATION\R\N\R\NFLUSH MILLING UNIT WITH 2 HF MOTORS á 1,9 KW, 12000 N, 200 HZ, FOR EDGE THICKNESS UP TO 25 MM.\R\N\R\NMILLING UNIT FOR FINE OR CHAMFER MILLING OF MASSIVE EDGES, PLASTIC AND VENEER EDGES, CHAMFER DEPTH ADJUSTMENT VIA PROGRAM CONTROL 0-3 MM STEPLESS. CLEANING SPINDLE FUNCTION FOR ROUGH MILLED MASSIVE WOOD EDGES WITH FINE CORRECTION VIA OPERATION PANEL WITH 2 HF-MOTORS 0,75 KW, 250 HZ, 14000N, 0 - 45 ° SWIVABLE, TRACING ON 2-SIDES.\R\N\R\NMILLLING UNIT FOR UPPER AND LOWER LENGTHWISE MILLING OF RADII ON PLASTIC, PVC AND WOOD EDGES. WITH TRACING ON 2 SIDES AND PNEUMATICAL POSTITIONING VIA THE CONTROL PROGRAMM. WITH 2 HF-MOTORS 0,4 KW 250 HZ/14000 N, WITH FIX TILT OF WORKING SPINDLES - 25° -.\R\N\R\NSCRAPING UNIT\R\N\R\NCONTOUR TRIMMING WITH TWO SEPARATE WORKING SPINDLES FOR TOP OR BOTTOM. FOR THE RADIUS PROCESSING OF FRONTAL AND REAR FRONTS OR POSTFORMING PROCESS. MILLING HEADS EQUIPPED WITH TWO AUTOMATICAL ADJUSTABLE AXES FOR DEPTH AND FRONT ADJUSTMENT AS WELL WITH AUTOMATICAL EDGE THICKNESS ADJUSTMENT. DETAILED ADJUSTMENTS IN PROCESSING PROGRAMS MEMORIZABLE.\R\N\R\NFLAT SCRAPING UNIT WITH FINE TRACING DEVICE FOR HOT MELT RESTS REMOVE IN THE AREA OF JOINT WITH SUCTION.\R\N\R\NRS CLEANING SET WITH 4 -FOLD SPRAYING DEVICES AND FINE BUFFING UNITS FOR CLEANING THE SURFACE\R\N- AS - ANTISTATIC SPRAYING DEVICE 2 FOLD, ON GLUED JOINT\R\N\R\NUNIVERSAL MILLING UNIT\R\NFOR GROOVING, REBATING, PROFILING, WITH 1 HF-MOTOR 3,5 KW, 150 HZ, 8500 N, 30 MM SPINDLE DIAMETER 0 - 90° SWIVABLE, EITHER IN WORKING OR COUNTER WORKING DIRECTION. USE CONTROL FOR FRONTS OR SIDES VIA OPERATOR GUIDANCE - WITHOUT TOOLS.\R\N\R\NUNIVERSAL MILLING UNIT\R\NFOR GROOVING, REBATING, PROFILING, WITH 1 HF-MOTOR 3,5 KW, 150 HZ, 8500 N, 30 MM SPINDLE DIAMETER 0 - 90° SWIVABLE, EITHER IN WORKING OR COUNTER WORKING DIRECTION. USE CONTROL FOR FRONTS OR SIDES VIA OPERATOR GUIDANCE - WITHOUT TOOLS.\R\N\R\NAUTOMAT. LUBRIFICATION\R\NHEATED INFEED FENCE\R\N2-FOLD-MAGAZINE, AUTOMATICAL COIL SUPPLY STOP, FOR FEED OF EACH ONE EDGE COIL WITH 800 AND 400 MM DIAMETER. WITH AUTOMATICAL CHANGE OF COILS VIA THE OPERATION PANEL.\R\N\R\NSPECIALS:\R\NTHE GLUING HEIGHT WILL BE RISEN ON A MAX. PANEL THICKNESS OF 65 MM. THE STANDARD PROCESS IN THE AREA OF END TRIMMING LENGTHWISE PROCESS - MILLING AND BOTH SCRAPING UNITS ARE CONSIDERED. ON 65 MM THICK PANEL MATERIALS MAX. 1 MM PVC EDGES SHOULD BE PROCESSED. THEREFORE A HOLD-DOWN, BACK-MOVING DEVICE AND CUTTING SYSTEM IS CHANGED.\R\N\R\NAUTOMATICAL CONTOUR TRIMMING AND ROUGH MILLING UNIT CAN ONLY PROCESS A PANEL THICKNESS OF 60 MM \R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-extrusionsbalsanlage bekum machines bekum bm 303
manufacturer: bekum
model: bm 303
year of construction: 1988
extruder: with pvc screw and groove collection
discontinuous battery-head with 1.5 liters volume incl. ceramic heating bands
original machine control
digital battery head beckhoff control system by picoplast
hydraulic power unit for the control of the akkukopfes (tyroller fa.)
renewal / extension of various machinery components, such as e.g. potentiometers, div. control cards,.
dust filter, air and hydraulic valves, electr. components u.v.m.
new ceramic heating bands on cylinder ihne & tesch incl. insulation
various peripherals, such as einfã¼llagermischer, arburg thermolift of dryer 100l, pe worm u.v.m.
condition:
absolutely functional, used condition
the off timer has 2016 bekum purchased the machine, beginning 2017 in operation. the aim was that
production of bottles in transparent materials from pet-g and co-polyester (tritan and eastar by eastman
chemicals). during the test phase has arisen but, that we're much better with a supplier,
as to produce itself.
time and business reasons, we now want to sell the plant.
the system is currently installed. in other words, a demonstration of the functioning can at any time-
by appointment - take place.
in total we have more than 100,000 euro in the purchase, preparation and maintenance of the machine
invested. this is verifiable with bills from the last 18 months.
the plant ran only about 650 hours in 2017 and 2018. EXTRUSIONSBALSANLAGE BEKUM MACHINES BEKUM BM 303 MANUFACTURER: BEKUM MODEL: BM 303 YEAR OF CONSTRUCTION: 1988 EXTRUDER: WITH PVC SCREW AND GROOVE COLLECTION DISCONTINUOUS BATTERY-HEAD WITH 1.5 LITERS VOLUME INCL. CERAMIC HEATING BANDS ORIGINAL MACHINE CONTROL DIGITAL BATTERY HEAD BECKHOFF CONTROL SYSTEM BY PICOPLAST HYDRAULIC POWER UNIT FOR THE CONTROL OF THE AKKUKOPFES (TYROLLER FA.) RENEWAL / EXTENSION OF VARIOUS MACHINERY COMPONENTS, SUCH AS E.G. POTENTIOMETERS, DIV. CONTROL CARDS,. DUST FILTER, AIR AND HYDRAULIC VALVES, ELECTR. COMPONENTS U.V.M. NEW CERAMIC HEATING BANDS ON CYLINDER IHNE & TESCH INCL. INSULATION VARIOUS PERIPHERALS, SUCH AS EINF&ATILDE;&FRAC14;LLAGERMISCHER, ARBURG THERMOLIFT OF DRYER 100L, PE WORM U.V.M. CONDITION: ABSOLUTELY FUNCTIONAL, USED CONDITION THE OFF TIMER HAS 2016 BEKUM PURCHASED THE MACHINE, BEGINNING 2017 IN OPERATION. THE AIM WAS THAT PRODUCTION OF BOTTLES IN TRANSPARENT MATERIALS FROM PET-G AND CO-POLYESTER (TRITAN AND EASTAR BY EASTMAN CHEMICALS). DURING THE TEST PHASE HAS ARISEN BUT, THAT WE'RE MUCH BETTER WITH A SUPPLIER, AS TO PRODUCE ITSELF. TIME AND BUSINESS REASONS, WE NOW WANT TO SELL THE PLANT. THE SYSTEM IS CURRENTLY INSTALLED. IN OTHER WORDS, A DEMONSTRATION OF THE FUNCTIONING CAN AT ANY TIME- BY APPOINTMENT - TAKE PLACE. IN TOTAL WE HAVE MORE THAN 100,000 EURO IN THE PURCHASE, PREPARATION AND MAINTENANCE OF THE MACHINE INVESTED. THIS IS VERIFIABLE WITH BILLS FROM THE LAST 18 MONTHS. THE PLANT RAN ONLY ABOUT 650 HOURS IN 2017 AND 2018.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>wall thickness: 2 mm<br/>tube diameter: 60 mm<br/>control: beckhoff <br/>dimensions (l x w x h) approx.: 6000x4000x2200 mm<br/>bending angle in degrees + / -: 180 °<br/>total power requirement: 42 kw<br/>tube length max.: 2000 mm<br/>description: <h3><u>schwarze-robitec cnc 60 mr tube bending machine</u></h3> <br> serial no. 2001-0210<br> <br> <h3>general data:</h3> <br> maximum Ø tube x wall thickness 70 x 3.5 mm<br> maximum Ø tube x wall thickness 65 x 2 mm<br> maximum bending radius up to center of pipe 160 + 40 mm<br> minimum bending radius up to center of pipe 30 mm<br> pipe lift length (standard) 2.000 mm<br> maximum bending speed (flow, infinitely variable) 22 1 / min<br> maximum bending speed (return, constant) 22 1 / min<br> bending direction right<br> <br> accessories: robot interface, documentation, no bending tools available.<br> WEIGHT APPROX.: 7000 KG
WALL THICKNESS: 2 MM
TUBE DIAMETER: 60 MM
CONTROL: BECKHOFF
DIMENSIONS (L X W X H) APPROX.: 6000X4000X2200 MM
BENDING ANGLE IN DEGREES + / -: 180 °
TOTAL POWER REQUIREMENT: 42 KW
TUBE LENGTH MAX.: 2000 MM
DESCRIPTION:

SCHWARZE-ROBITEC CNC 60 MR TUBE BENDING MACHINE


SERIAL NO. 2001-0210

GENERAL DATA:


MAXIMUM Ø TUBE X WALL THICKNESS 70 X 3.5 MM
MAXIMUM Ø TUBE X WALL THICKNESS 65 X 2 MM
MAXIMUM BENDING RADIUS UP TO CENTER OF PIPE 160 + 40 MM
MINIMUM BENDING RADIUS UP TO CENTER OF PIPE 30 MM
PIPE LIFT LENGTH (STANDARD) 2.000 MM
MAXIMUM BENDING SPEED (FLOW, INFINITELY VARIABLE) 22 1 / MIN
MAXIMUM BENDING SPEED (RETURN, CONSTANT) 22 1 / MIN
BENDING DIRECTION RIGHT

ACCESSORIES: ROBOT INTERFACE, DOCUMENTATION, NO BENDING TOOLS AVAILABLE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.150 €
Ubicación:


has been used in a packing machine previously; ready for operation .gif" alt="Land-industrial pc for installation in the front of a machine or for installation in the control cabinet.



mainboard: ip-4gvi63

cpu: intel piv 2.4 ghz

memory: 512 mb ddr-ram

power supply: 100-240 vac, 50-60hz

hard disc: excelstar 40 gb
display: 15\"



has been used in a packing machine previously; ready for operation " style="height: 18px;"> INDUSTRIAL PC FOR INSTALLATION IN THE FRONT OF A MACHINE OR FOR INSTALLATION IN THE CONTROL CABINET.



MAINBOARD: IP-4GVI63

CPU: INTEL PIV 2.4 GHZ

MEMORY: 512 MB DDR-RAM

POWER SUPPLY: 100-240 VAC, 50-60HZ

HARD DISC: EXCELSTAR 40 GB
DISPLAY: 15\"



HAS BEEN USED IN A PACKING MACHINE PREVIOUSLY; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Precio: 160 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.150 €
Ubicación:


has been used in a packing machine previously; ready for operation .gif" alt="Land-industrial pc for installation in the front of a machine or for installation in the control cabinet.



mainboard: ip-4gvi63

cpu: intel piv m 2.2 ghz

memory: 512 mb ddr-ram

power supply: 100-240 vac, 50-60hz

hard disc: excelstar 40 gb
display: 15\"



has been used in a packing machine previously; ready for operation " style="height: 18px;"> INDUSTRIAL PC FOR INSTALLATION IN THE FRONT OF A MACHINE OR FOR INSTALLATION IN THE CONTROL CABINET.



MAINBOARD: IP-4GVI63

CPU: INTEL PIV M 2.2 GHZ

MEMORY: 512 MB DDR-RAM

POWER SUPPLY: 100-240 VAC, 50-60HZ

HARD DISC: EXCELSTAR 40 GB
DISPLAY: 15\"



HAS BEEN USED IN A PACKING MACHINE PREVIOUSLY; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Precio: 380 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 980 €
Ubicación:


has been used in a packing machine previously; ready for operation .gif" alt="Land-industrial pc for installation in the front of a machine or for installation in the control cabinet.



mainboard: boser hs 6237 sbc

cpu: intel celeron 700 mhz

memory: 128 m sdram

power supply: 24v dc ups

hard disc: toshiba mk1016 gap 10 gb

display: 12\" toshiba ltm12c275a



has been used in a packing machine previously; ready for operation " style="height: 18px;"> INDUSTRIAL PC FOR INSTALLATION IN THE FRONT OF A MACHINE OR FOR INSTALLATION IN THE CONTROL CABINET.



MAINBOARD: BOSER HS 6237 SBC

CPU: INTEL CELERON 700 MHZ

MEMORY: 128 M SDRAM

POWER SUPPLY: 24V DC UPS

HARD DISC: TOSHIBA MK1016 GAP 10 GB

DISPLAY: 12\" TOSHIBA LTM12C275A



HAS BEEN USED IN A PACKING MACHINE PREVIOUSLY; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Precio: 160 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.150 €
Ubicación:


including c990-u330 batterypack



mainboard: cb3050-0007

cpu: pentium m 1.8 ghz

memory: 1024 mb ddr-ram 50

power supply: 24vdc ups

hard disc: 2.5\" 40 gb sata

display: 15\" lq150x 1lw71n



has been used in a packing machine previously

; ready for operation .gif" alt="Land-industrial pc for mounting arm installation including 15\" display



including c990-u330 batterypack



mainboard: cb3050-0007

cpu: pentium m 1.8 ghz

memory: 1024 mb ddr-ram 50

power supply: 24vdc ups

hard disc: 2.5\" 40 gb sata

display: 15\" lq150x 1lw71n



has been used in a packing machine previously

; ready for operation " style="height: 18px;"> INDUSTRIAL PC FOR MOUNTING ARM INSTALLATION INCLUDING 15\" DISPLAY



INCLUDING C990-U330 BATTERYPACK



MAINBOARD: CB3050-0007

CPU: PENTIUM M 1.8 GHZ

MEMORY: 1024 MB DDR-RAM 50

POWER SUPPLY: 24VDC UPS

HARD DISC: 2.5\" 40 GB SATA

DISPLAY: 15\" LQ150X 1LW71N



HAS BEEN USED IN A PACKING MACHINE PREVIOUSLY

; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Precio: 310 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 650 €
Ubicación: Land-; ready for operation ; READY FOR OPERATION
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.600 €
Ubicación: Land-we provide the following to the purchase :<br>beckhoff cppc 7112-1007 beckhoff pc monitor with steinless steel keyboard<br><br><br>mainboard: boser hs6237 sbc<br><br>cpu: intel celeron<br><br>memory: 128 mb sdram<br><br>slot 1: slotplate with usb ports and dvi-port<br><br>slot 2: boser sbc-v2.2b<br><br>slot 3: slotplate with com 1 and com 2<br><br>slot 4: slotplate with lpt 1<br><br>harddisk: toshiba mk2023gas, 20gb<br><br>cd rom: teac 235hf 1.44mb a:<br><br>display: 15 zoll toshiba ltm 15c428s<br><br>monitor without touchscreen<br><br>touchpad: glidepoint on ps/2<br><br>ports: kt 7000 on ps/2<br><br>power supply: 24v dc<br><br>; second hand WE PROVIDE THE FOLLOWING TO THE PURCHASE :
BECKHOFF CPPC 7112-1007 BECKHOFF PC MONITOR WITH STEINLESS STEEL KEYBOARD


MAINBOARD: BOSER HS6237 SBC

CPU: INTEL CELERON

MEMORY: 128 MB SDRAM

SLOT 1: SLOTPLATE WITH USB PORTS AND DVI-PORT

SLOT 2: BOSER SBC-V2.2B

SLOT 3: SLOTPLATE WITH COM 1 AND COM 2

SLOT 4: SLOTPLATE WITH LPT 1

HARDDISK: TOSHIBA MK2023GAS, 20GB

CD ROM: TEAC 235HF 1.44MB A:

DISPLAY: 15 ZOLL TOSHIBA LTM 15C428S

MONITOR WITHOUT TOUCHSCREEN

TOUCHPAD: GLIDEPOINT ON PS/2

PORTS: KT 7000 ON PS/2

POWER SUPPLY: 24V DC

; SECOND HAND
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-professionally refurbished machine by ues in 2015. with beckhoff control system, hand-over and suction cups take-out. extruder 70/20d pe. head as per your needs. ac motor with frequency inverter on extruder. ready to start production PROFESSIONALLY REFURBISHED MACHINE BY UES IN 2015. WITH BECKHOFF CONTROL SYSTEM, HAND-OVER AND SUCTION CUPS TAKE-OUT. EXTRUDER 70/20D PE. HEAD AS PER YOUR NEEDS. AC MOTOR WITH FREQUENCY INVERTER ON EXTRUDER. READY TO START PRODUCTION
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Precio: 180 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 44.000 €
Ubicación: Land-technische daten:<br/> <br/>hydraulisches untertisch-kreissägeaggregat<br/> <br/>- antriebsleistung motor 7,5 kw<br/>- durchmesser sägeblatt z=48x5 600 mm<br/>- durchmesser sägeblattbohrung 30 mm<br/>- geneigter arbeitstisch ja<br/>- automatische rotation des tisches -70c 0c+70c<br/>- geschwindigkeit der rotation von / auf 0c / 70 c 3s<br/>- positioniergenauigkeit +/- 0,2c<br/>- pneumatischer werkstückniederhalter 2 stück<br/>- pneumatische seitenausrichter 2 stück<br/>- sicherheitsabdeckung über kappaggregat ja<br/>- schnittkapazität bei 0c: 160 x 310 mm, 80 x 390 mm<br/>- schnittkapazität bei 45c: 160 x 220 mm, 80 x 270 mm<br/>- schnittkapazität bei 70c: 160 x 90 mm, 80 x 130 mm<br/>- minimale werkstückstärke 10 mm<br/> <br/>anschlusswerte<br/>- versorgungsspannung 400 v / 50 hz<br/>- steuerspannung 24 v<br/>- druckluftbedarf bei 8 bar pro zyklus ca. 8 nl<br/>- absaugstutzen fi100 mm 2 stück<br/>- absaugstutzen fi160 mm 1 stück<br/>- luftgeschwindigkeit absaugung in stutzenmitte ca. 25-35 m/s<br/> <br/>elektronisch gesteuerter schieber:<br/>- beschickungslänge: 6000 mm<br/>- antrieb über bürstenlosen servomotor<br/>- vorschubsystem mit präzisionszahnstangen und massabnahme über resolver des servomotors<br/>- pneumatisch anhebbarer schubpunkt zum Überfahren des werkstücks im folgezyklus<br/>- positioniertoleranz +/- 0,4mm<br/> <br/>steuerung:<br/>- steuerung beckhoff industrie pc mit betriebssystem windows ce mit touch screen monitor<br/>- dateneingabe über tastatur, mittels usb oder über netzwerk<br/>- 5 optimierungskriterien: a) maximale länge , b) minimaler abfall c) teilepriorität d) volumen e)wert<br/>- bearbeitungsmöglichkeit einzelner stücklisten oder zusammenfassen von kommissionen<br/>- grafische darstellung der teile in bearbeitung<br/>- möglichkeit der paketweisen bearbeitung<br/>- 70 schnittlisten mit 21 abmessungen pro liste oder eine schnittliste mit 400 abmessungen<br/>- sicherheitseinrichtung<br/>- entsprechend ce-norm ja<br/>- schutzverhausung inklusive ja TECHNISCHE DATEN:

HYDRAULISCHES UNTERTISCH-KREISSäGEAGGREGAT

- ANTRIEBSLEISTUNG MOTOR 7,5 KW
- DURCHMESSER SäGEBLATT Z=48X5 600 MM
- DURCHMESSER SäGEBLATTBOHRUNG 30 MM
- GENEIGTER ARBEITSTISCH JA
- AUTOMATISCHE ROTATION DES TISCHES -70C 0C+70C
- GESCHWINDIGKEIT DER ROTATION VON / AUF 0C / 70 C 3S
- POSITIONIERGENAUIGKEIT +/- 0,2C
- PNEUMATISCHER WERKSTüCKNIEDERHALTER 2 STüCK
- PNEUMATISCHE SEITENAUSRICHTER 2 STüCK
- SICHERHEITSABDECKUNG üBER KAPPAGGREGAT JA
- SCHNITTKAPAZITäT BEI 0C: 160 X 310 MM, 80 X 390 MM
- SCHNITTKAPAZITäT BEI 45C: 160 X 220 MM, 80 X 270 MM
- SCHNITTKAPAZITäT BEI 70C: 160 X 90 MM, 80 X 130 MM
- MINIMALE WERKSTüCKSTäRKE 10 MM

ANSCHLUSSWERTE
- VERSORGUNGSSPANNUNG 400 V / 50 HZ
- STEUERSPANNUNG 24 V
- DRUCKLUFTBEDARF BEI 8 BAR PRO ZYKLUS CA. 8 NL
- ABSAUGSTUTZEN FI100 MM 2 STüCK
- ABSAUGSTUTZEN FI160 MM 1 STüCK
- LUFTGESCHWINDIGKEIT ABSAUGUNG IN STUTZENMITTE CA. 25-35 M/S

ELEKTRONISCH GESTEUERTER SCHIEBER:
- BESCHICKUNGSLäNGE: 6000 MM
- ANTRIEB üBER BüRSTENLOSEN SERVOMOTOR
- VORSCHUBSYSTEM MIT PRäZISIONSZAHNSTANGEN UND MASSABNAHME üBER RESOLVER DES SERVOMOTORS
- PNEUMATISCH ANHEBBARER SCHUBPUNKT ZUM ÜBERFAHREN DES WERKSTüCKS IM FOLGEZYKLUS
- POSITIONIERTOLERANZ +/- 0,4MM

STEUERUNG:
- STEUERUNG BECKHOFF INDUSTRIE PC MIT BETRIEBSSYSTEM WINDOWS CE MIT TOUCH SCREEN MONITOR
- DATENEINGABE üBER TASTATUR, MITTELS USB ODER üBER NETZWERK
- 5 OPTIMIERUNGSKRITERIEN: A) MAXIMALE LäNGE , B) MINIMALER ABFALL C) TEILEPRIORITäT D) VOLUMEN E)WERT
- BEARBEITUNGSMöGLICHKEIT EINZELNER STüCKLISTEN ODER ZUSAMMENFASSEN VON KOMMISSIONEN
- GRAFISCHE DARSTELLUNG DER TEILE IN BEARBEITUNG
- MöGLICHKEIT DER PAKETWEISEN BEARBEITUNG
- 70 SCHNITTLISTEN MIT 21 ABMESSUNGEN PRO LISTE ODER EINE SCHNITTLISTE MIT 400 ABMESSUNGEN
- SICHERHEITSEINRICHTUNG
- ENTSPRECHEND CE-NORM JA
- SCHUTZVERHAUSUNG INKLUSIVE JA
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: koch, type: bd 61 ptp, year: 1996, control: beckhoff, software: beckhoff, working width min-max mm: 50-1200, min.-max. workpiece thickness in mm: 10-50, drilling support horizontal: 1, drill gearings: 1, drill gearings: 1, drill gearings: 1, number of drill spindles: 1, drilling engine kw: ca.1,0, working range max mm: 60, axis-controlled: x/z, dovel lenght mm: 8  x 30, number of doveling tools: 1, elektronische : yes, dowel monitoring: yes, glue high-pressure pump: niededruck, glue quantity setting: yes, beleimwerkzeuge: 1, dovel insertion: yes, dowel size mm: 8, drilling depth: 45, drilling hight: 50, year :1996 MANUFACTURER: KOCH, TYPE: BD 61 PTP, YEAR: 1996, CONTROL: BECKHOFF, SOFTWARE: BECKHOFF, WORKING WIDTH MIN-MAX MM: 50-1200, MIN.-MAX. WORKPIECE THICKNESS IN MM: 10-50, DRILLING SUPPORT HORIZONTAL: 1, DRILL GEARINGS: 1, DRILL GEARINGS: 1, DRILL GEARINGS: 1, NUMBER OF DRILL SPINDLES: 1, DRILLING ENGINE KW: CA.1,0, WORKING RANGE MAX MM: 60, AXIS-CONTROLLED: X/Z, DOVEL LENGHT MM: 8 X 30, NUMBER OF DOVELING TOOLS: 1, ELEKTRONISCHE : YES, DOWEL MONITORING: YES, GLUE HIGH-PRESSURE PUMP: NIEDEDRUCK, GLUE QUANTITY SETTING: YES, BELEIMWERKZEUGE: 1, DOVEL INSERTION: YES, DOWEL SIZE MM: 8, DRILLING DEPTH: 45, DRILLING HIGHT: 50, YEAR :1996
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: prima power
model: shear genius e6
application type: punching
machine type: turret punching machine
availability: immediately
construction year: 2013
production hours: 6650
location: india
origin country: finland
delivery time: immediately

general data:
measurements width: 7000 mm
measurements depth: 16000 mm
measurements height: 2200 mm
machine weight: 26000 kg

main drive:
punching force: 300 kn

control unit:
brand: beckhoff

movement:
x-axis: 3000 mm
y-axis: 1500 mm

tools:
no. of stations: 20 (2 multi tool) 
max. tool diameter: 88.9 mm
no. of index: 4 

media:
main electronic connection: 400 v 
air pressure: 6 bar  OVERVIEW: BRAND: PRIMA POWER MODEL: SHEAR GENIUS E6 APPLICATION TYPE: PUNCHING MACHINE TYPE: TURRET PUNCHING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2013 PRODUCTION HOURS: 6650 LOCATION: INDIA ORIGIN COUNTRY: FINLAND DELIVERY TIME: IMMEDIATELY GENERAL DATA: MEASUREMENTS WIDTH: 7000 MM MEASUREMENTS DEPTH: 16000 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 26000 KG MAIN DRIVE: PUNCHING FORCE: 300 KN CONTROL UNIT: BRAND: BECKHOFF MOVEMENT: X-AXIS: 3000 MM Y-AXIS: 1500 MM TOOLS: NO. OF STATIONS: 20 (2 MULTI TOOL) MAX. TOOL DIAMETER: 88.9 MM NO. OF INDEX: 4 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V AIR PRESSURE: 6 BAR
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: koch contuorfräsmaschine, type: sprint ptp 2 1800, year: 2012, control: beckhoff, program: koch-wop, online connection: möglich, machining stations: 2, 4 achsensteuerung: yes, work piece width min-max mm: 120-1360, work piece length min-max mm: 120-1360, work piece thickness min-max mm: 19-25, number of milling spindles: 1, milling spindles horizontal: 1, tastend aggregat: 1, power kw 1: ca.0,75, rpm min-max 1: 18000, free text: zusätzliche festplatte/windows xp, year :2012 MANUFACTURER: KOCH CONTUORFR&AUML;SMASCHINE, TYPE: SPRINT PTP 2 1800, YEAR: 2012, CONTROL: BECKHOFF, PROGRAM: KOCH-WOP, ONLINE CONNECTION: M&OUML;GLICH, MACHINING STATIONS: 2, 4 ACHSENSTEUERUNG: YES, WORK PIECE WIDTH MIN-MAX MM: 120-1360, WORK PIECE LENGTH MIN-MAX MM: 120-1360, WORK PIECE THICKNESS MIN-MAX MM: 19-25, NUMBER OF MILLING SPINDLES: 1, MILLING SPINDLES HORIZONTAL: 1, TASTEND AGGREGAT: 1, POWER KW 1: CA.0,75, RPM MIN-MAX 1: 18000, FREE TEXT: ZUS&AUML;TZLICHE FESTPLATTE/WINDOWS XP, YEAR :2012
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-precast - wall - filigree - factory.
good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - facilities, 1 x vibrated concrete station, new control - beckhoff. concrete distributor crane 1.4 m³. friction wheels. roller blocks. planning and installation as required. formwork on request. is dependend on the application.

for low cost housing, cmodul austria low cost housing

affordable housing low-cost housing 

mixing system 1 m³ at extra charge.
tilting device if needed for concrete slabs vertical-tansport at extra charge.
cran for stock handling at extra charge.


projects for social housing are our daily work.

civil work plans, drawings and calculations, we can create for you.

similarly, profitability calculations.















PRECAST - WALL - FILIGREE - FACTORY. GOOD AS NEW CIRCULATION SYSTEM: 60 PALLETS WITH 3.5 MX 8 M, 3 X LATERAL TRANSPORT OF PALLETS - FACILITIES, 1 X VIBRATED CONCRETE STATION, NEW CONTROL - BECKHOFF. CONCRETE DISTRIBUTOR CRANE 1.4 M³. FRICTION WHEELS. ROLLER BLOCKS. PLANNING AND INSTALLATION AS REQUIRED. FORMWORK ON REQUEST. IS DEPENDEND ON THE APPLICATION. FOR LOW COST HOUSING, CMODUL AUSTRIA LOW COST HOUSING AFFORDABLE HOUSING LOW-COST HOUSING MIXING SYSTEM 1 M³ AT EXTRA CHARGE. TILTING DEVICE IF NEEDED FOR CONCRETE SLABS VERTICAL-TANSPORT AT EXTRA CHARGE. CRAN FOR STOCK HANDLING AT EXTRA CHARGE. PROJECTS FOR SOCIAL HOUSING ARE OUR DAILY WORK. CIVIL WORK PLANS, DRAWINGS AND CALCULATIONS, WE CAN CREATE FOR YOU. SIMILARLY, PROFITABILITY CALCULATIONS.
Vendedor: ERICH PETER MACHINES - PLANTS GMBH
Año de construcción: usado
Ubicación: Land-manufacturer: ima, type: compact f 12, year: 1996, control: beckhoff, min-max edge material mm: 0,5-3,0, work piece width min-max mm: 65, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-50, min-max feed m/min: 18, infeed table: yes, premilling: yes, coil magazine: yes, strip magazin: yes, min.-max. batten magazine mm: yes, mitre stations: yes, pre-milling: yes, corner tracing type: yes, 4 motors: yes, 4 motors: yes, bonding part eva: yes, pre-smelting kg/hr: yes, year :1996 MANUFACTURER: IMA, TYPE: COMPACT F 12, YEAR: 1996, CONTROL: BECKHOFF, MIN-MAX EDGE MATERIAL MM: 0,5-3,0, WORK PIECE WIDTH MIN-MAX MM: 65, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-50, MIN-MAX FEED M/MIN: 18, INFEED TABLE: YES, PREMILLING: YES, COIL MAGAZINE: YES, STRIP MAGAZIN: YES, MIN.-MAX. BATTEN MAGAZINE MM: YES, MITRE STATIONS: YES, PRE-MILLING: YES, CORNER TRACING TYPE: YES, 4 MOTORS: YES, 4 MOTORS: YES, BONDING PART EVA: YES, PRE-SMELTING KG/HR: YES, YEAR :1996
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: kuper, type: kfe 1600, year: 2017, control: beckhoff/kuper, cycles approx.: 3 teile / min, feeding belt mm: yes, foil wrapping machine mm: yes, foil stations: 3, welding frame dimensions mm: 1700, intermediate transport mm: 2.800, outlet conveyor mm: yes, through running hight mm: 300, working width mm: 1500, lifting krane: yes,  machine ready for demonstration: yes, year :2017 MANUFACTURER: KUPER, TYPE: KFE 1600, YEAR: 2017, CONTROL: BECKHOFF/KUPER, CYCLES APPROX.: 3 TEILE / MIN, FEEDING BELT MM: YES, FOIL WRAPPING MACHINE MM: YES, FOIL STATIONS: 3, WELDING FRAME DIMENSIONS MM: 1700, INTERMEDIATE TRANSPORT MM: 2.800, OUTLET CONVEYOR MM: YES, THROUGH RUNNING HIGHT MM: 300, WORKING WIDTH MM: 1500, LIFTING KRANE: YES, MACHINE READY FOR DEMONSTRATION: YES, YEAR :2017
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: koch, type: bd 61 ptp, year: 1991, control: beckhoff, software: beckhoff, working width min-max mm: 50-1200, min.-max. workpiece thickness in mm: 10-50, drilling support horizontal: 1, drill gearings: 1, drill gearings: 1, drill gearings: 1, number of drill spindles: 1, drilling engine kw: ca.1,0, working range max mm: 60, axis-controlled: x/z, dovel lenght mm: 8  x 30, number of doveling tools: 1, elektronische : yes, dowel monitoring: yes, glue high-pressure pump: niededruck, glue quantity setting: yes, beleimwerkzeuge: 1, dovel insertion: yes, dowel size mm: 8, drilling depth: 45, drilling hight: 50, year :1991 MANUFACTURER: KOCH, TYPE: BD 61 PTP, YEAR: 1991, CONTROL: BECKHOFF, SOFTWARE: BECKHOFF, WORKING WIDTH MIN-MAX MM: 50-1200, MIN.-MAX. WORKPIECE THICKNESS IN MM: 10-50, DRILLING SUPPORT HORIZONTAL: 1, DRILL GEARINGS: 1, DRILL GEARINGS: 1, DRILL GEARINGS: 1, NUMBER OF DRILL SPINDLES: 1, DRILLING ENGINE KW: CA.1,0, WORKING RANGE MAX MM: 60, AXIS-CONTROLLED: X/Z, DOVEL LENGHT MM: 8 X 30, NUMBER OF DOVELING TOOLS: 1, ELEKTRONISCHE : YES, DOWEL MONITORING: YES, GLUE HIGH-PRESSURE PUMP: NIEDEDRUCK, GLUE QUANTITY SETTING: YES, BELEIMWERKZEUGE: 1, DOVEL INSERTION: YES, DOWEL SIZE MM: 8, DRILLING DEPTH: 45, DRILLING HIGHT: 50, YEAR :1991
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: koch windoor, type: bl-51-nc, year: 1998, control: beckhoff, work piece width min-max mm: 30-200, milling spindles horizontal: 2, feeding speed max m/min: ca.80, drill vertical y: 5, horizontal drills-x: 9, number of milling spindles: 4, free text: dübelwerkzeuge 3, year :1998 MANUFACTURER: KOCH WINDOOR, TYPE: BL-51-NC, YEAR: 1998, CONTROL: BECKHOFF, WORK PIECE WIDTH MIN-MAX MM: 30-200, MILLING SPINDLES HORIZONTAL: 2, FEEDING SPEED MAX M/MIN: CA.80, DRILL VERTICAL Y: 5, HORIZONTAL DRILLS-X: 9, NUMBER OF MILLING SPINDLES: 4, FREE TEXT: D&UUML;BELWERKZEUGE 3, YEAR :1998
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. workpiece length: 5150 mm<br/>profile spindle: 1 stück<br/>main drive: 16 kw<br/>control: beckhoff <br/>cnc machining center masterwood project 385 wl, neumaschine<br/><br/>the all-rounder for<br/>windows, round arches and doors<br/>interior<br/>post and beam<br/>5-axis machining of all kinds<br/><br/>detailed description in the adjacent pdf file!<br/><br/>highlights:<br/><br/>- working range: x = 5150 mm, y = 1500 mm, z = 200 mm<br/>- 1 pc. 5-axis high-performance spindle, 16 kw,<br/>double bearing with hsk 63 f recording<br/>- fixed drill head with 19 spindles<br/>with 7 individually retrievable vertical spindles x-direction<br/>with 6 individually retrievable vertical spindles y-direction<br/>with 2 double horizontal spindles x-direction<br/>and 1 double horizontal boring spindle in the y direction<br/>saw unit integrated in drill head<br/><br/>- carousel tool changer with 22 places and 102 mm grid spacing<br/>- carousel tool changer with 16 places and 102 mm grid spacing<br/>- linear 4-fold tool magazine<br/>- special clamps for straight window and door parts<br/>- special clamps for round window and door elements<br/>- 24 pcs. vacuum clamps for internal installation<br/>- vacuum pump<br/>- chip conveyor belt<br/>- extensive design software for interior design, panel processing as well as<br/>f. windows and doors:<br/>masterwork: 2d-wop for standard application panel processing / interior fitting <br/>with<br/>additional function lamello connection<br/><br/>master 3d level 2: for more complex edits,<br/>optionally also expandable for 5-axis fully interpolating<br/><br/>masterwindow: integrated window and door design software<br/>i.e. machine does not have to (but of course) with external industry software<br/>be controlled.<br/><br/><br/>video shows production of 4 sash parts in one clamping<br/>complete machining including glazing bead production. corner joint hybrid.<br/>of course, all common corner joints on the machine<br/>producible.<br/><br/><br/>other options on request!<br/><br/>we are also happy to offer you suitable tools for the machine.<br/><br/><br/>(techn.according to the manufacturer - without guarantee!)<br/><br/><br/><br/><br/> MAX. WORKPIECE LENGTH: 5150 MM
PROFILE SPINDLE: 1 STüCK
MAIN DRIVE: 16 KW
CONTROL: BECKHOFF
CNC MACHINING CENTER MASTERWOOD PROJECT 385 WL, NEUMASCHINE

THE ALL-ROUNDER FOR
WINDOWS, ROUND ARCHES AND DOORS
INTERIOR
POST AND BEAM
5-AXIS MACHINING OF ALL KINDS

DETAILED DESCRIPTION IN THE ADJACENT PDF FILE!

HIGHLIGHTS:

- WORKING RANGE: X = 5150 MM, Y = 1500 MM, Z = 200 MM
- 1 PC. 5-AXIS HIGH-PERFORMANCE SPINDLE, 16 KW,
DOUBLE BEARING WITH HSK 63 F RECORDING
- FIXED DRILL HEAD WITH 19 SPINDLES
WITH 7 INDIVIDUALLY RETRIEVABLE VERTICAL SPINDLES X-DIRECTION
WITH 6 INDIVIDUALLY RETRIEVABLE VERTICAL SPINDLES Y-DIRECTION
WITH 2 DOUBLE HORIZONTAL SPINDLES X-DIRECTION
AND 1 DOUBLE HORIZONTAL BORING SPINDLE IN THE Y DIRECTION
SAW UNIT INTEGRATED IN DRILL HEAD

- CAROUSEL TOOL CHANGER WITH 22 PLACES AND 102 MM GRID SPACING
- CAROUSEL TOOL CHANGER WITH 16 PLACES AND 102 MM GRID SPACING
- LINEAR 4-FOLD TOOL MAGAZINE
- SPECIAL CLAMPS FOR STRAIGHT WINDOW AND DOOR PARTS
- SPECIAL CLAMPS FOR ROUND WINDOW AND DOOR ELEMENTS
- 24 PCS. VACUUM CLAMPS FOR INTERNAL INSTALLATION
- VACUUM PUMP
- CHIP CONVEYOR BELT
- EXTENSIVE DESIGN SOFTWARE FOR INTERIOR DESIGN, PANEL PROCESSING AS WELL AS
F. WINDOWS AND DOORS:
MASTERWORK: 2D-WOP FOR STANDARD APPLICATION PANEL PROCESSING / INTERIOR FITTING
WITH
ADDITIONAL FUNCTION LAMELLO CONNECTION

MASTER 3D LEVEL 2: FOR MORE COMPLEX EDITS,
OPTIONALLY ALSO EXPANDABLE FOR 5-AXIS FULLY INTERPOLATING

MASTERWINDOW: INTEGRATED WINDOW AND DOOR DESIGN SOFTWARE
I.E. MACHINE DOES NOT HAVE TO (BUT OF COURSE) WITH EXTERNAL INDUSTRY SOFTWARE
BE CONTROLLED.


VIDEO SHOWS PRODUCTION OF 4 SASH PARTS IN ONE CLAMPING
COMPLETE MACHINING INCLUDING GLAZING BEAD PRODUCTION. CORNER JOINT HYBRID.
OF COURSE, ALL COMMON CORNER JOINTS ON THE MACHINE
PRODUCIBLE.


OTHER OPTIONS ON REQUEST!

WE ARE ALSO HAPPY TO OFFER YOU SUITABLE TOOLS FOR THE MACHINE.


(TECHN.ACCORDING TO THE MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-pressure:    160 t<br/>plate thickness:      6 mm<br/>no  of strokes:     70 hub/min<br/>--------------------------------------------------:  <br/>press design:  <br/>- drive system: knuckle-joint:        <br/>slide:  <br/>- total force (nominal):    160 to<br/>- stroke:     60 mm<br/>- stroke rate (max.):     70 /min<br/>counter ram:  <br/>- nominal force:     40 to<br/>- stroke:     14 mm<br/>v-ring:  <br/>- nominal force:     50 to<br/>- stroke:     10 mm<br/>tool dimensions:  <br/>- lower table - width:    480 mm<br/>- lower table - depth:    520 mm<br/>- upper table - width:    480 mm<br/>- upper table - depth:    520 mm<br/>- shut height max.:    314 mm<br/>- ram adjustment:     80 mm<br/>- distance between columns (h-frame):    500 mm<br/>- passline opening (free passage in side columns):    220 mm<br/>strip-feeder:  <br/>- feeder type: roll feeder:        <br/>- sheet width max:    210 mm<br/>- sheet thickness max:      6 mm<br/>- feeding step max.:  999.9 mm<br/>- sheet length min:   2000 mm<br/>- pilot release system: yes:        <br/>- band lubrication system: yes:        <br/>last overhaul: 2019<br/>complete refurbished fineblanking press:<br/>* disassembly into individual parts<br/>* findings of all components (crack test)<br/>* overhaul of the drive<br/>* overhaul of the guides<br/>* overhaul of the impression cylinders<br/>* overhaul of the clamping tables<br/>* new hydraulic unit<br/>* new pneumatics<br/><br/><br/>with modernization:<br/>* servo feeders<br/>* central lubrication<br/>* new brake/clutch unit<br/>* pc control beckhoff with touch display<br/>* safety control unit pilz<br/>* ce conformity<br/><br/><br/>+ overhaul is offered including machine provided by prodeq.<br/>+ optional customer requests can be integrated<br/>+ pictures show a reference machine (work picture)<br/><br/>-&,gt, if you are interested or have any questions on our services, <br/>please do not hesitate to contact us!<br/><br/><br/><br/><br/> PRESSURE: 160 T
PLATE THICKNESS: 6 MM
NO OF STROKES: 70 HUB/MIN
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: KNUCKLE-JOINT:
SLIDE:
- TOTAL FORCE (NOMINAL): 160 TO
- STROKE: 60 MM
- STROKE RATE (MAX.): 70 /MIN
COUNTER RAM:
- NOMINAL FORCE: 40 TO
- STROKE: 14 MM
V-RING:
- NOMINAL FORCE: 50 TO
- STROKE: 10 MM
TOOL DIMENSIONS:
- LOWER TABLE - WIDTH: 480 MM
- LOWER TABLE - DEPTH: 520 MM
- UPPER TABLE - WIDTH: 480 MM
- UPPER TABLE - DEPTH: 520 MM
- SHUT HEIGHT MAX.: 314 MM
- RAM ADJUSTMENT: 80 MM
- DISTANCE BETWEEN COLUMNS (H-FRAME): 500 MM
- PASSLINE OPENING (FREE PASSAGE IN SIDE COLUMNS): 220 MM
STRIP-FEEDER:
- FEEDER TYPE: ROLL FEEDER:
- SHEET WIDTH MAX: 210 MM
- SHEET THICKNESS MAX: 6 MM
- FEEDING STEP MAX.: 999.9 MM
- SHEET LENGTH MIN: 2000 MM
- PILOT RELEASE SYSTEM: YES:
- BAND LUBRICATION SYSTEM: YES:
LAST OVERHAUL: 2019
COMPLETE REFURBISHED FINEBLANKING PRESS:
* DISASSEMBLY INTO INDIVIDUAL PARTS
* FINDINGS OF ALL COMPONENTS (CRACK TEST)
* OVERHAUL OF THE DRIVE
* OVERHAUL OF THE GUIDES
* OVERHAUL OF THE IMPRESSION CYLINDERS
* OVERHAUL OF THE CLAMPING TABLES
* NEW HYDRAULIC UNIT
* NEW PNEUMATICS


WITH MODERNIZATION:
* SERVO FEEDERS
* CENTRAL LUBRICATION
* NEW BRAKE/CLUTCH UNIT
* PC CONTROL BECKHOFF WITH TOUCH DISPLAY
* SAFETY CONTROL UNIT PILZ
* CE CONFORMITY


+ OVERHAUL IS OFFERED INCLUDING MACHINE PROVIDED BY PRODEQ.
+ OPTIONAL CUSTOMER REQUESTS CAN BE INTEGRATED
+ PICTURES SHOW A REFERENCE MACHINE (WORK PICTURE)

-&,GT, IF YOU ARE INTERESTED OR HAVE ANY QUESTIONS ON OUR SERVICES,
PLEASE DO NOT HESITATE TO CONTACT US!




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-pressure:    250 t<br/>plate thickness:     10 mm<br/>no  of strokes:     60 hub/min<br/>--------------------------------------------------:  <br/>press design:  <br/>- drive system: knuckle-joint:        <br/>slide:  <br/>- total force (nominal):    250 to<br/>- stroke:     61 mm<br/>- stroke rate (max.):     60 /min<br/>counter ram:  <br/>- nominal force:     75 to<br/>- stroke:     15 mm<br/>v-ring:  <br/>- nominal force:     75 to<br/>- stroke:     13 mm<br/>tool dimensions:  <br/>- lower table - width:    540 mm<br/>- lower table - depth:    540 mm<br/>- upper table - width:    540 mm<br/>- upper table - depth:    540 mm<br/>- shut height max.:    320 mm<br/>- ram adjustment:    145 mm<br/>- distance between columns (h-frame):    560 mm<br/>- passline opening (free passage in side columns):    270 mm<br/>strip-feeder:  <br/>- feeder type: roll feeder:        <br/>- sheet width max:    250 mm<br/>- sheet thickness max:     10 mm<br/>- feeding step max.: 999.99 mm<br/>- sheet length min:   1900 mm<br/>- pilot release system: yes:        <br/>- band lubrication system: yes:        <br/>last overhaul: 2019<br/>complete refurbished fineblanking press:<br/>* disassembly into individual parts<br/>* findings of all components (crack test)<br/>* overhaul of the drive<br/>* overhaul of the guides<br/>* overhaul of the impression cylinders<br/>* overhaul of the clamping tables<br/>* new hydraulic unit<br/>* new pneumatics<br/><br/><br/>with modernization:<br/>* servo feeders<br/>* central lubrication<br/>* new brake/clutch unit<br/>* pc control beckhoff with touch display<br/>* safety control unit pilz<br/>* ce conformity<br/><br/><br/>+ overhaul is offered including machine provided by prodeq.<br/>+ optional customer requests can be integrated<br/>+ pictures show a reference machine (work picture)<br/><br/>-&,gt, if you are interested or have any questions on our services, <br/>please do not hesitate to contact us!<br/><br/><br/><br/><br/> PRESSURE: 250 T
PLATE THICKNESS: 10 MM
NO OF STROKES: 60 HUB/MIN
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: KNUCKLE-JOINT:
SLIDE:
- TOTAL FORCE (NOMINAL): 250 TO
- STROKE: 61 MM
- STROKE RATE (MAX.): 60 /MIN
COUNTER RAM:
- NOMINAL FORCE: 75 TO
- STROKE: 15 MM
V-RING:
- NOMINAL FORCE: 75 TO
- STROKE: 13 MM
TOOL DIMENSIONS:
- LOWER TABLE - WIDTH: 540 MM
- LOWER TABLE - DEPTH: 540 MM
- UPPER TABLE - WIDTH: 540 MM
- UPPER TABLE - DEPTH: 540 MM
- SHUT HEIGHT MAX.: 320 MM
- RAM ADJUSTMENT: 145 MM
- DISTANCE BETWEEN COLUMNS (H-FRAME): 560 MM
- PASSLINE OPENING (FREE PASSAGE IN SIDE COLUMNS): 270 MM
STRIP-FEEDER:
- FEEDER TYPE: ROLL FEEDER:
- SHEET WIDTH MAX: 250 MM
- SHEET THICKNESS MAX: 10 MM
- FEEDING STEP MAX.: 999.99 MM
- SHEET LENGTH MIN: 1900 MM
- PILOT RELEASE SYSTEM: YES:
- BAND LUBRICATION SYSTEM: YES:
LAST OVERHAUL: 2019
COMPLETE REFURBISHED FINEBLANKING PRESS:
* DISASSEMBLY INTO INDIVIDUAL PARTS
* FINDINGS OF ALL COMPONENTS (CRACK TEST)
* OVERHAUL OF THE DRIVE
* OVERHAUL OF THE GUIDES
* OVERHAUL OF THE IMPRESSION CYLINDERS
* OVERHAUL OF THE CLAMPING TABLES
* NEW HYDRAULIC UNIT
* NEW PNEUMATICS


WITH MODERNIZATION:
* SERVO FEEDERS
* CENTRAL LUBRICATION
* NEW BRAKE/CLUTCH UNIT
* PC CONTROL BECKHOFF WITH TOUCH DISPLAY
* SAFETY CONTROL UNIT PILZ
* CE CONFORMITY


+ OVERHAUL IS OFFERED INCLUDING MACHINE PROVIDED BY PRODEQ.
+ OPTIONAL CUSTOMER REQUESTS CAN BE INTEGRATED
+ PICTURES SHOW A REFERENCE MACHINE (WORK PICTURE)

-&,GT, IF YOU ARE INTERESTED OR HAVE ANY QUESTIONS ON OUR SERVICES,
PLEASE DO NOT HESITATE TO CONTACT US!




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-pressure:  t<br/>diameter:  mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>ingredients:<br/>16x punch riveting tools<br/>16x rivet feed units<br/>6x beckhoff control<br/>3x hmi mobile panel<br/>3x hmi panels<br/>6x hydraulic units<br/><br/>material:<br/>semi-tubular rivet made of stainless steel - flat head, different lengths<br/>connection of 2 layers of aluminum (0.8 mm), no pre-drilling necessary<br/><br/><br/><br/><br/> PRESSURE: T
DIAMETER: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
INGREDIENTS:
16X PUNCH RIVETING TOOLS
16X RIVET FEED UNITS
6X BECKHOFF CONTROL
3X HMI MOBILE PANEL
3X HMI PANELS
6X HYDRAULIC UNITS

MATERIAL:
SEMI-TUBULAR RIVET MADE OF STAINLESS STEEL - FLAT HEAD, DIFFERENT LENGTHS
CONNECTION OF 2 LAYERS OF ALUMINUM (0.8 MM), NO PRE-DRILLING NECESSARY




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-table length: 8100 mm<br/>table width: 2000 mm<br/>burner heads:  <br/>control: cnc beckhoff <br/>total power requirement:  kw<br/>weight of the machine ca.: 26,5 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TABLE LENGTH: 8100 MM
TABLE WIDTH: 2000 MM
BURNER HEADS:
CONTROL: CNC BECKHOFF
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 26,5 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-table length: 6150 mm<br/>table width: 2000 mm<br/>burner heads:  <br/>control: cnc beckhoff <br/>total power requirement:  kw<br/>weight of the machine ca.: 21,1 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TABLE LENGTH: 6150 MM
TABLE WIDTH: 2000 MM
BURNER HEADS:
CONTROL: CNC BECKHOFF
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 21,1 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-table length: 2500 mm<br/>table width: 1250 mm<br/>burner heads:  <br/>control: beckhoff <br/>total power requirement:  kw<br/>weight of the machine ca.: 10,4 t<br/>dimensions of the machine ca.: 5200 x 4200 x 2610 mm m<br/><br/><br/><br/><br/> TABLE LENGTH: 2500 MM
TABLE WIDTH: 1250 MM
BURNER HEADS:
CONTROL: BECKHOFF
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 10,4 T
DIMENSIONS OF THE MACHINE CA.: 5200 X 4200 X 2610 MM M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-table length: 4000 mm<br/>table width: 2000 mm<br/>burner heads:  <br/>control: cnc beckhoff <br/>total power requirement:  kw<br/>weight of the machine ca.: 15,8 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TABLE LENGTH: 4000 MM
TABLE WIDTH: 2000 MM
BURNER HEADS:
CONTROL: CNC BECKHOFF
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 15,8 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BECKHOFF types: