484 ofertas

Año de construcción: usado
Ubicación: Land-we sell a used paternoster circular shelf.

type: cargo 2500
manufacturer: zambelli
max. load capacity: 250 kg
max. total load: 3.500 kg
nominal power: 3,0 kw

a visit is possible after agreement at any time. the tour can be done in an operable state.

our sister company is a manufacturer. thus, the removal (disassembly and re-assembly), as well as div. services can be conveyed.
a self removal is possible.   WE SELL A USED PATERNOSTER CIRCULAR SHELF. TYPE: CARGO 2500 MANUFACTURER: ZAMBELLI MAX. LOAD CAPACITY: 250 KG MAX. TOTAL LOAD: 3.500 KG NOMINAL POWER: 3,0 KW A VISIT IS POSSIBLE AFTER AGREEMENT AT ANY TIME. THE TOUR CAN BE DONE IN AN OPERABLE STATE. OUR SISTER COMPANY IS A MANUFACTURER. THUS, THE REMOVAL (DISASSEMBLY AND RE-ASSEMBLY), AS WELL AS DIV. SERVICES CAN BE CONVEYED. A SELF REMOVAL IS POSSIBLE.
Vendedor: Zambelli Fertigungs GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-amtec fillingsystem - sample system for small volume bottle filling<br><br>samples system to fill small bottles with small volume of liquid: typical use is filling of eye drops. the system includes an container unscrambler, which sets the small bottles into an infeed line. module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. the system is plc controlled. the total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. all liquid touching parts are made of stainless steel ss316 completely. <br><br>- specifications: filling precision: less than +/- 0.5% | max. speed of the machine in neutral: 120 bottles/minute | filling capacity: 5-30ml | 380v, 3.8kw | 6bar. all these specifications only are sample specifications. depending on the final working process they will vary. - please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGSYSTEM - SAMPLE SYSTEM FOR SMALL VOLUME BOTTLE FILLING

SAMPLES SYSTEM TO FILL SMALL BOTTLES WITH SMALL VOLUME OF LIQUID: TYPICAL USE IS FILLING OF EYE DROPS. THE SYSTEM INCLUDES AN CONTAINER UNSCRAMBLER, WHICH SETS THE SMALL BOTTLES INTO AN INFEED LINE. MODULE TO CLEAN THE BOTTLES (WATER/GAS) AND INSIDE/OUTSIDE TUCKS (CAP PARTS), FILLING AND LABELLING THE BOTTLES. THE SYSTEM IS PLC CONTROLLED. THE TOTAL 3 CLEANING PROCESSES WITH WATER PLUS THE 3 CLEANING PROCESSES WITH GAS ASSURES A VERY HIGH CLEANING STANDARD WITHOUT ANY WATER REMAINING. ALL LIQUID TOUCHING PARTS ARE MADE OF STAINLESS STEEL SS316 COMPLETELY.

- SPECIFICATIONS: FILLING PRECISION: LESS THAN +/- 0.5% | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 BOTTLES/MINUTE | FILLING CAPACITY: 5-30ML | 380V, 3.8KW | 6BAR. ALL THESE SPECIFICATIONS ONLY ARE SAMPLE SPECIFICATIONS. DEPENDING ON THE FINAL WORKING PROCESS THEY WILL VARY. - PLEASE GIVE US YOUR DETAILED INQUIRY (CONTAINER SHAPE AND SIZE, SPEED , PRODUCT TO FILL, WORKING STEPS) TO GIVE YOU A FULL QUOTATION.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-we sell a used paternoster circular shelf.

type: cargo 5000
manufacturer: zambelli metalltechnik gmbh & co.kg
max. load capacity: 500 kg
max. total load: 14,000 kg
nominal power: 2 x 3,0 kw

a visit is possible after agreement at any time. the tour can be done in an operable state.

our sister company is a manufacturer. thus, the removal (disassembly and re-assembly), as well as div. services can be conveyed.
a self removal is possible.   WE SELL A USED PATERNOSTER CIRCULAR SHELF. TYPE: CARGO 5000 MANUFACTURER: ZAMBELLI METALLTECHNIK GMBH & CO.KG MAX. LOAD CAPACITY: 500 KG MAX. TOTAL LOAD: 14,000 KG NOMINAL POWER: 2 X 3,0 KW A VISIT IS POSSIBLE AFTER AGREEMENT AT ANY TIME. THE TOUR CAN BE DONE IN AN OPERABLE STATE. OUR SISTER COMPANY IS A MANUFACTURER. THUS, THE REMOVAL (DISASSEMBLY AND RE-ASSEMBLY), AS WELL AS DIV. SERVICES CAN BE CONVEYED. A SELF REMOVAL IS POSSIBLE.
Vendedor: Zambelli Fertigungs GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-amtec horizonpack bag and box labelling machine 130<br><br>labelling machine for labelling various packages or products such as boxes, bags, cartons. <br><br>- specifications labeller: label width: 15-130mm, or customized | product dimensions: l(50-250)xw(80-300)xh(0.1-30)mm, customized adaptations possible | max. speed of the machine in neutral: 100 cycles/minute | power: 1kw, 220v | machine dimensions: l2000xb600xh1750mm | weight: 250kg. module for hot stamping for bbd, batch number etc. optionally available.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC HORIZONPACK BAG AND BOX LABELLING MACHINE 130

LABELLING MACHINE FOR LABELLING VARIOUS PACKAGES OR PRODUCTS SUCH AS BOXES, BAGS, CARTONS.

- SPECIFICATIONS LABELLER: LABEL WIDTH: 15-130MM, OR CUSTOMIZED | PRODUCT DIMENSIONS: L(50-250)XW(80-300)XH(0.1-30)MM, CUSTOMIZED ADAPTATIONS POSSIBLE | MAX. SPEED OF THE MACHINE IN NEUTRAL: 100 CYCLES/MINUTE | POWER: 1KW, 220V | MACHINE DIMENSIONS: L2000XB600XH1750MM | WEIGHT: 250KG. MODULE FOR HOT STAMPING FOR BBD, BATCH NUMBER ETC. OPTIONALLY AVAILABLE.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-we sell a used paternoster circular shelf.

type: cargo 5001
manufacturer: zambelli
max. load capacity: 500 kg
max. total load: 10,500 kg
nominal power: 4,5 kw

a visit is possible after agreement at any time. the tour can be done in an operable state.

our sister company is a manufacturer. thus, the removal (disassembly and re-assembly), as well as div. services can be conveyed.
a self removal is possible.  WE SELL A USED PATERNOSTER CIRCULAR SHELF. TYPE: CARGO 5001 MANUFACTURER: ZAMBELLI MAX. LOAD CAPACITY: 500 KG MAX. TOTAL LOAD: 10,500 KG NOMINAL POWER: 4,5 KW A VISIT IS POSSIBLE AFTER AGREEMENT AT ANY TIME. THE TOUR CAN BE DONE IN AN OPERABLE STATE. OUR SISTER COMPANY IS A MANUFACTURER. THUS, THE REMOVAL (DISASSEMBLY AND RE-ASSEMBLY), AS WELL AS DIV. SERVICES CAN BE CONVEYED. A SELF REMOVAL IS POSSIBLE.
Vendedor: Zambelli Fertigungs GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap net clipping machine for fruits, vegetables and industrial products 0.5-5.0kg<br><br>auto clipping machine to pack fruits and vegetables as well as industrial products into netting sleeves which are closed at both ends by a metallic staple/clip. suitable to be combined as infeed system: amtec vertiwrap auto dosing machine for fruits, vegetables, etc.- at least, at one of the tops, a labelling/identification tag is placed. - possibility of an automatic change of tube (suitable to carry 200m of net), controlled by a motor. net extraction through a sliding system with two gears: a slow for making the pack and a fast one for getting back the remaining net and returning to the start position. very regular pack size for very flexible net being supplied form net pipe with diameter of 200mm. suitable for packs of 0.5-5.0kg. control panel for easy operation. <br><br>- specifications: max. speed of the machine in neutral: 35 cycles/minute | power: 380v, 2.9kw | air: 1.5m³/min, 6bar | machine dimensions: l1840xw720xh2010mm | weight: 425kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP NET CLIPPING MACHINE FOR FRUITS, VEGETABLES AND INDUSTRIAL PRODUCTS 0.5-5.0KG

AUTO CLIPPING MACHINE TO PACK FRUITS AND VEGETABLES AS WELL AS INDUSTRIAL PRODUCTS INTO NETTING SLEEVES WHICH ARE CLOSED AT BOTH ENDS BY A METALLIC STAPLE/CLIP. SUITABLE TO BE COMBINED AS INFEED SYSTEM: AMTEC VERTIWRAP AUTO DOSING MACHINE FOR FRUITS, VEGETABLES, ETC.- AT LEAST, AT ONE OF THE TOPS, A LABELLING/IDENTIFICATION TAG IS PLACED. - POSSIBILITY OF AN AUTOMATIC CHANGE OF TUBE (SUITABLE TO CARRY 200M OF NET), CONTROLLED BY A MOTOR. NET EXTRACTION THROUGH A SLIDING SYSTEM WITH TWO GEARS: A SLOW FOR MAKING THE PACK AND A FAST ONE FOR GETTING BACK THE REMAINING NET AND RETURNING TO THE START POSITION. VERY REGULAR PACK SIZE FOR VERY FLEXIBLE NET BEING SUPPLIED FORM NET PIPE WITH DIAMETER OF 200MM. SUITABLE FOR PACKS OF 0.5-5.0KG. CONTROL PANEL FOR EASY OPERATION.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 35 CYCLES/MINUTE | POWER: 380V, 2.9KW | AIR: 1.5M³/MIN, 6BAR | MACHINE DIMENSIONS: L1840XW720XH2010MM | WEIGHT: 425KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-cover fp2, compl. disassembled and overhauled, condition like new paint new, mechanics kplt. tested and reconditioned, table planed, stripper, can bellows new (y), chuck sk40 s20, glass scale surcharge still installs, free loaded from site
sale only to professionals COVER FP2, COMPL. DISASSEMBLED AND OVERHAULED, CONDITION LIKE NEW PAINT NEW, MECHANICS KPLT. TESTED AND RECONDITIONED, TABLE PLANED, STRIPPER, CAN BELLOWS NEW (Y), CHUCK SK40 S20, GLASS SCALE SURCHARGE STILL INSTALLS, FREE LOADED FROM SITE SALE ONLY TO PROFESSIONALS
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 3500 mm<br/>description: - serial no.: 91.117320/001<br> - permissible total payload: 2712 kg<br> - permissible shelf load at equal load distribution: 230/240 kg<br> - voltage: 3 x 380 v, 50/60 hz<br> - power consumption: 2,5 kw WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 3500 MM
DESCRIPTION: - SERIAL NO.: 91.117320/001
- PERMISSIBLE TOTAL PAYLOAD: 2712 KG
- PERMISSIBLE SHELF LOAD AT EQUAL LOAD DISTRIBUTION: 230/240 KG
- VOLTAGE: 3 X 380 V, 50/60 HZ
- POWER CONSUMPTION: 2,5 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labelling machine khs innoket kl 2090/120 – 60

labelling machine by khs innoket kl 2090/120 – 60, manufactured in year 2005 and was stopped in year 2015. this labelling machine can be equipped with four of the same or different type labelling stations. currently it has two labelling system for paper labels with cold glue and additionally there are three stations for self-adhesive labels. machine it has been used for glass bottles front/back/neck labels. capacity for paper labels is 66 000 bph and for self-adhesive labels is 40 000 bph. controlled by siemens s7 plc. equipment is in very good condition.

technical specifications:

manufacturer: khs
machine type: innoket kl 2090/120 – 60
manufacturer year: 2005
ready cut paper labels, hot clue: 66 000 bph
self adhesive plastic labels: 40 000 bph
pitch: 120 mm
number of bottle turrets: 60 pcs.
carousel diameter: 2360 mm.
label positions: front, back, neck
label lengths: 140 mm.   LABELLING MACHINE KHS INNOKET KL 2090/120 – 60 LABELLING MACHINE BY KHS INNOKET KL 2090/120 – 60, MANUFACTURED IN YEAR 2005 AND WAS STOPPED IN YEAR 2015. THIS LABELLING MACHINE CAN BE EQUIPPED WITH FOUR OF THE SAME OR DIFFERENT TYPE LABELLING STATIONS. CURRENTLY IT HAS TWO LABELLING SYSTEM FOR PAPER LABELS WITH COLD GLUE AND ADDITIONALLY THERE ARE THREE STATIONS FOR SELF-ADHESIVE LABELS. MACHINE IT HAS BEEN USED FOR GLASS BOTTLES FRONT/BACK/NECK LABELS. CAPACITY FOR PAPER LABELS IS 66 000 BPH AND FOR SELF-ADHESIVE LABELS IS 40 000 BPH. CONTROLLED BY SIEMENS S7 PLC. EQUIPMENT IS IN VERY GOOD CONDITION. TECHNICAL SPECIFICATIONS: MANUFACTURER: KHS MACHINE TYPE: INNOKET KL 2090/120 – 60 MANUFACTURER YEAR: 2005 READY CUT PAPER LABELS, HOT CLUE: 66 000 BPH SELF ADHESIVE PLASTIC LABELS: 40 000 BPH PITCH: 120 MM NUMBER OF BOTTLE TURRETS: 60 PCS. CAROUSEL DIAMETER: 2360 MM. LABEL POSITIONS: FRONT, BACK, NECK LABEL LENGTHS: 140 MM.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-capacity: 38000  b/h      <br />equipment: palletising, empties inspection, decrowner, decrater, crate washer, bottle washing machine, empty bottle inspector, bottle filling machine, fill height inspection, labelling machine, label inspection, crater, filled crate inspection<br /> CAPACITY: 38000 B/H
EQUIPMENT: PALLETISING, EMPTIES INSPECTION, DECROWNER, DECRATER, CRATE WASHER, BOTTLE WASHING MACHINE, EMPTY BOTTLE INSPECTOR, BOTTLE FILLING MACHINE, FILL HEIGHT INSPECTION, LABELLING MACHINE, LABEL INSPECTION, CRATER, FILLED CRATE INSPECTION
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.250 €
Ubicación: Land-speed: 5000 pieces/hour SPEED: 5000 PIECES/HOUR
Vendedor: Intergavel
Año de construcción: usado
Ubicación: Land-dosage capacity: 46  g/h<br />operating pressure: 10  bar<br />ip code:     <br />power consumption: 598/600 w<br /> DOSAGE CAPACITY: 46 G/H
OPERATING PRESSURE: 10 BAR
IP CODE:
POWER CONSUMPTION: 598/600 W
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-qty: 1 db
type: xjy-360b
manufacturer: tom
year of manufacture: 2014
size(mm): 2400x1300-1700  QTY: 1 DB TYPE: XJY-360B MANUFACTURER: TOM YEAR OF MANUFACTURE: 2014 SIZE(MM): 2400X1300-1700
Vendedor: Intergavel
Año de construcción: usado
Ubicación: Land-capacity: 20000  b/h<br />max. pressure: 6  bar    <br />power consumption: 12 kw<br />formats:  bottles: 0,5 l nrw / euro or 0,33 l ale / steini<br />operation / control:  siemens s7<br />equipment:  incl. format parts,  bottle table in p-construction, 4 gripper heads each 20 centring bell, 4 gripper heads each 24 centring bell, store for gripper garnitures, control cabinet<br /> CAPACITY: 20000 B/H
MAX. PRESSURE: 6 BAR
POWER CONSUMPTION: 12 KW
FORMATS: BOTTLES: 0,5 L NRW / EURO OR 0,33 L ALE / STEINI
OPERATION / CONTROL: SIEMENS S7
EQUIPMENT: INCL. FORMAT PARTS, BOTTLE TABLE IN P-CONSTRUCTION, 4 GRIPPER HEADS EACH 20 CENTRING BELL, 4 GRIPPER HEADS EACH 24 CENTRING BELL, STORE FOR GRIPPER GARNITURES, CONTROL CABINET
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 3.200 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 3300 x 2400 x 2000 mm<br/>description: - serial no.: 960357<br> - clamping surface approx.: 800 x 600 mm<br> - with four t-slots in metal cover<br> - with control unit pcbl 4-3 (yom 1995) as well as air conditioning system ers, type: sce 7.0 v (yom 1999)<br> - the machine has to be picked up on 13th or 14th of may 2019 WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 3300 X 2400 X 2000 MM
DESCRIPTION: - SERIAL NO.: 960357
- CLAMPING SURFACE APPROX.: 800 X 600 MM
- WITH FOUR T-SLOTS IN METAL COVER
- WITH CONTROL UNIT PCBL 4-3 (YOM 1995) AS WELL AS AIR CONDITIONING SYSTEM ERS, TYPE: SCE 7.0 V (YOM 1999)
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR 14TH OF MAY 2019
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 10.000 
Ubicación: Land-automatic labelling machine eca
is designed for sticking one label on cylindrical packaging, for example. bottles, cans, jars, etc.
gluing can be done on the part of or around the perimeter. labeling machine works with paper labels.
the glue is applied stripes on the entire length of the label. the machine uses mainly stainless materials.
labelling machine eca is intended to automatically place a single paper labels on cylindrical or square packaging such as bottles, jars, cans, plastic, etc., in a wide range of dimensions . it is made of elements made of stainless steel, plastic and die casting secured against corrosion, va steel coatings and lakierniczymi. transporter, covers and clutch parts are made of stainless steel (grade 1h18n9t).

bej9teavxo
accuracy (nierównoleg?o??) bonding of labels is 1 mm to 100 mm in length.

overall dimensions: • length-2700 mm; • width-1.000 mm; • height-1.320 mm.
technical data: •
• max. efficiency-6.000 op/h.;
• weight-450 kg;
• has the adhesive heating;
• power supply-220/380 v-10 a;
• the dimensions of the label-max. length – 230 mm; max.
height-200 mm;
• drive-electric motor-1.5 kw;
1.420 u/min
; • diameter-min. 50 mm; max: 100 mm;
• the scope of the bonding-the height of the glue (minimum 2 mm from the base to the bottom edge of the label) (max. 200 mm from the base to the top edge of the label)-precision bonding (nierównoleg?a to the base up to 1 mm/100 mm length of the labels) AUTOMATIC LABELLING MACHINE ECA IS DESIGNED FOR STICKING ONE LABEL ON CYLINDRICAL PACKAGING, FOR EXAMPLE. BOTTLES, CANS, JARS, ETC. GLUING CAN BE DONE ON THE PART OF OR AROUND THE PERIMETER. LABELING MACHINE WORKS WITH PAPER LABELS. THE GLUE IS APPLIED STRIPES ON THE ENTIRE LENGTH OF THE LABEL. THE MACHINE USES MAINLY STAINLESS MATERIALS. LABELLING MACHINE ECA IS INTENDED TO AUTOMATICALLY PLACE A SINGLE PAPER LABELS ON CYLINDRICAL OR SQUARE PACKAGING SUCH AS BOTTLES, JARS, CANS, PLASTIC, ETC., IN A WIDE RANGE OF DIMENSIONS . IT IS MADE OF ELEMENTS MADE OF STAINLESS STEEL, PLASTIC AND DIE CASTING SECURED AGAINST CORROSION, VA STEEL COATINGS AND LAKIERNICZYMI. TRANSPORTER, COVERS AND CLUTCH PARTS ARE MADE OF STAINLESS STEEL (GRADE 1H18N9T). BEJ9TEAVXO ACCURACY (NIERóWNOLEG?O??) BONDING OF LABELS IS 1 MM TO 100 MM IN LENGTH. OVERALL DIMENSIONS: • LENGTH-2700 MM; • WIDTH-1.000 MM; • HEIGHT-1.320 MM. TECHNICAL DATA: • • MAX. EFFICIENCY-6.000 OP/H.; • WEIGHT-450 KG; • HAS THE ADHESIVE HEATING; • POWER SUPPLY-220/380 V-10 A; • THE DIMENSIONS OF THE LABEL-MAX. LENGTH – 230 MM; MAX. HEIGHT-200 MM; • DRIVE-ELECTRIC MOTOR-1.5 KW; 1.420 U/MIN ; • DIAMETER-MIN. 50 MM; MAX: 100 MM; • THE SCOPE OF THE BONDING-THE HEIGHT OF THE GLUE (MINIMUM 2 MM FROM THE BASE TO THE BOTTOM EDGE OF THE LABEL) (MAX. 200 MM FROM THE BASE TO THE TOP EDGE OF THE LABEL)-PRECISION BONDING (NIERóWNOLEG?A TO THE BASE UP TO 1 MM/100 MM LENGTH OF THE LABELS)
Vendedor: Machine-For-Sale.com
Año de construcción: usado
Precio: used machinery auction RESALE 8.200 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 30000 x 4000 x 4300 mm<br/>description: composition: machine for loading and opening cardboard boxes comarme f-2000 (1998), roller conveyor for manual loading of the boxes, length 5000 mm, width 300 mm, scale unit and control box tesab ts300 (1998) capacity 25 kg, with sensors for waste , machine for closing the boxes comemn gem-f45 (1998), labeller al tech vb code (1998), palletizing system mariani pmt (1998), pallet packing machine spiropack r-125 / a (1998), see photos for technical data WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 30000 X 4000 X 4300 MM
DESCRIPTION: COMPOSITION: MACHINE FOR LOADING AND OPENING CARDBOARD BOXES COMARME F-2000 (1998), ROLLER CONVEYOR FOR MANUAL LOADING OF THE BOXES, LENGTH 5000 MM, WIDTH 300 MM, SCALE UNIT AND CONTROL BOX TESAB TS300 (1998) CAPACITY 25 KG, WITH SENSORS FOR WASTE , MACHINE FOR CLOSING THE BOXES COMEMN GEM-F45 (1998), LABELLER AL TECH VB CODE (1998), PALLETIZING SYSTEM MARIANI PMT (1998), PALLET PACKING MACHINE SPIROPACK R-125 / A (1998), SEE PHOTOS FOR TECHNICAL DATA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-this high capacity innoket kl 2080 labeling machine was manufactured in year 2005 by khs gmbh, germany and it is dismantled in year 2013. this labelette has two stations for cold glue labeling system and it suits both for paper and foil applications. this has been used for glass bottles front-back-neck labels. it is controlled by siemens s7 plc combined with khs touch screen operator interface. labeler machine is in good operational condition. note: this labeller has no label orientation unit

technical information:
manufacturer's type: innoket kl 2080/120 - 48 lm gt
manufacturing year: 2005
code number: 1143
capacity: glass bottles 60000 bph
control plc: simatic s7 / 300
operator panel: khs touch screen
frequency converters: danfoss vlt 5000   THIS HIGH CAPACITY INNOKET KL 2080 LABELING MACHINE WAS MANUFACTURED IN YEAR 2005 BY KHS GMBH, GERMANY AND IT IS DISMANTLED IN YEAR 2013. THIS LABELETTE HAS TWO STATIONS FOR COLD GLUE LABELING SYSTEM AND IT SUITS BOTH FOR PAPER AND FOIL APPLICATIONS. THIS HAS BEEN USED FOR GLASS BOTTLES FRONT-BACK-NECK LABELS. IT IS CONTROLLED BY SIEMENS S7 PLC COMBINED WITH KHS TOUCH SCREEN OPERATOR INTERFACE. LABELER MACHINE IS IN GOOD OPERATIONAL CONDITION. NOTE: THIS LABELLER HAS NO LABEL ORIENTATION UNIT TECHNICAL INFORMATION: MANUFACTURER'S TYPE: INNOKET KL 2080/120 - 48 LM GT MANUFACTURING YEAR: 2005 CODE NUMBER: 1143 CAPACITY: GLASS BOTTLES 60000 BPH CONTROL PLC: SIMATIC S7 / 300 OPERATOR PANEL: KHS TOUCH SCREEN FREQUENCY CONVERTERS: DANFOSS VLT 5000
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-line in a box packniov

-conveyor brings
-dispenser to pocket
-standalone
-labeller: side + below
-cadence line 25 jars per minute LINE IN A BOX PACKNIOV -CONVEYOR BRINGS -DISPENSER TO POCKET -STANDALONE -LABELLER: SIDE + BELOW -CADENCE LINE 25 JARS PER MINUTE
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 1400 x 500 x 200 mm<br/>description: lot composed of 2 pieces. width 1350 mm. code dis.3551959 comm.095822-sp. see photo WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 500 X 200 MM
DESCRIPTION: LOT COMPOSED OF 2 PIECES. WIDTH 1350 MM. CODE DIS.3551959 COMM.095822-SP. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-automatic labellers multivac

-4 automatic labelers
-rates: 30 to 80 products / min
-labeling:
1.deux side faces and the upper side, with 3 labels
2 top with one label
before 3 and upper face with a single label and front, top and back with a single label
-thermal transfer printing
-printer markem imaje x 40 AUTOMATIC LABELLERS MULTIVAC -4 AUTOMATIC LABELERS -RATES: 30 TO 80 PRODUCTS / MIN -LABELING: 1.DEUX SIDE FACES AND THE UPPER SIDE, WITH 3 LABELS 2 TOP WITH ONE LABEL BEFORE 3 AND UPPER FACE WITH A SINGLE LABEL AND FRONT, TOP AND BACK WITH A SINGLE LABEL -THERMAL TRANSFER PRINTING -PRINTER MARKEM IMAJE X 40
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 350 x 350 x 300 mm<br/>description: max force 20 kn<br> see photos WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 350 X 300 MM
DESCRIPTION: MAX FORCE 20 KN
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-automatic labeller multivac 4 heads

-labelling machine 4 heads AUTOMATIC LABELLER MULTIVAC 4 HEADS -LABELLING MACHINE 4 HEADS
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 300 x 300 x 300 mm<br/>description: serial number 587<br> max tractive force 60 kn<br> max thrust force 60 kn<br> max rotational speed 8000 rpm<br> see photos WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 300 X 300 MM
DESCRIPTION: SERIAL NUMBER 587
MAX TRACTIVE FORCE 60 KN
MAX THRUST FORCE 60 KN
MAX ROTATIONAL SPEED 8000 RPM
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ultra clean – aseptic filling line krones for pet bottles 24000 bph 
 
complete ultra clean filling line for carbonated and non-carbonated juices, soft drinks, cider, water made by krones and gea in 2010, operations started in 2013. filling, rinsing and capping compartment of the line is aseptic. the line has modern krones contiform bloc where blow molder is directly connected with ultra clean - aseptic filling bloc without air conveyor. process department is made by gea and it can produce various fully aseptic products and other beverages. packing department has very versatile krones variopac pro for shrink, shrink tray and carton boxing and a palletizer. equipment is in very well maintained and good condition. 
 
main characteristics 
 
manufacturer                                      krones and gea
manufacturing year                             2010 – installed in 2013 
filling process                                     ultra clean – aseptic 
suitable for                                         carbonated and non-carbonated drinks 
current product                                  apple juice with water and co2 
currently used container sizes            pet 0.5 ltr, 1.0 ltr and 1.5 ltr 
neck format                                        pco 1810 – 28 mm
capacity                                              24000bph for 0.5 ltr  and 18000bph for 1.5 ltr 
control plcs                                      siemens simatic s7-series 
ultra clean disinfectant                     c2h4o3 (paracetic acid)
 
list of main equipment 
 
krones varioclean fully automatic cip system  
gea processing plant with flash pasteurizer, mixer, carbonator, degasser and tanks 
preform kipper and feeding conveyors 
preform feeding system krones contifeed 
blow moulder krones contiform s12m 
ultra clean krones volumetric rinser, filler and capper block  
ultra clean krones variodos filler block cleaning system kb 59091 
filling and closing level inspector krones checkmat 731 
bottle dryer krones power dry 15  
labelling machine krones contiroll opp label with hot glue 
date coder domino (laser) 
label inspector krones checkmat 731 
shrink – tray (carton) packer krones variopro 
handle applicator twin pack 
pack coding leisinger jet 3 (ink) 
palletizer krones modulpal 

  ULTRA CLEAN – ASEPTIC FILLING LINE KRONES FOR PET BOTTLES 24000 BPH COMPLETE ULTRA CLEAN FILLING LINE FOR CARBONATED AND NON-CARBONATED JUICES, SOFT DRINKS, CIDER, WATER MADE BY KRONES AND GEA IN 2010, OPERATIONS STARTED IN 2013. FILLING, RINSING AND CAPPING COMPARTMENT OF THE LINE IS ASEPTIC. THE LINE HAS MODERN KRONES CONTIFORM BLOC WHERE BLOW MOLDER IS DIRECTLY CONNECTED WITH ULTRA CLEAN - ASEPTIC FILLING BLOC WITHOUT AIR CONVEYOR. PROCESS DEPARTMENT IS MADE BY GEA AND IT CAN PRODUCE VARIOUS FULLY ASEPTIC PRODUCTS AND OTHER BEVERAGES. PACKING DEPARTMENT HAS VERY VERSATILE KRONES VARIOPAC PRO FOR SHRINK, SHRINK TRAY AND CARTON BOXING AND A PALLETIZER. EQUIPMENT IS IN VERY WELL MAINTAINED AND GOOD CONDITION. MAIN CHARACTERISTICS MANUFACTURER KRONES AND GEA MANUFACTURING YEAR 2010 – INSTALLED IN 2013 FILLING PROCESS ULTRA CLEAN – ASEPTIC SUITABLE FOR CARBONATED AND NON-CARBONATED DRINKS CURRENT PRODUCT APPLE JUICE WITH WATER AND CO2 CURRENTLY USED CONTAINER SIZES PET 0.5 LTR, 1.0 LTR AND 1.5 LTR NECK FORMAT PCO 1810 – 28 MM CAPACITY 24000BPH FOR 0.5 LTR AND 18000BPH FOR 1.5 LTR CONTROL PLCS SIEMENS SIMATIC S7-SERIES ULTRA CLEAN DISINFECTANT C2H4O3 (PARACETIC ACID) LIST OF MAIN EQUIPMENT KRONES VARIOCLEAN FULLY AUTOMATIC CIP SYSTEM GEA PROCESSING PLANT WITH FLASH PASTEURIZER, MIXER, CARBONATOR, DEGASSER AND TANKS PREFORM KIPPER AND FEEDING CONVEYORS PREFORM FEEDING SYSTEM KRONES CONTIFEED BLOW MOULDER KRONES CONTIFORM S12M ULTRA CLEAN KRONES VOLUMETRIC RINSER, FILLER AND CAPPER BLOCK ULTRA CLEAN KRONES VARIODOS FILLER BLOCK CLEANING SYSTEM KB 59091 FILLING AND CLOSING LEVEL INSPECTOR KRONES CHECKMAT 731 BOTTLE DRYER KRONES POWER DRY 15 LABELLING MACHINE KRONES CONTIROLL OPP LABEL WITH HOT GLUE DATE CODER DOMINO (LASER) LABEL INSPECTOR KRONES CHECKMAT 731 SHRINK – TRAY (CARTON) PACKER KRONES VARIOPRO HANDLE APPLICATOR TWIN PACK PACK CODING LEISINGER JET 3 (INK) PALLETIZER KRONES MODULPAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; power [ps]: 517 ; POWER [PS]: 517
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-line for filling and labelling bottles of vinegar, but can also be used for other liquids: (1) vacuum filler krones 305 vv/ sov 04-v: bottle format: 0.75/ 0.5l, bottle dimensions: 78.3x242mm, output: 7000 bottles/h (2) fully automatic labelling machine krones robusta 722 600-10: output: 10,000 bottles/h, bottle dimensions: 50-125x150-350mm.  LINE FOR FILLING AND LABELLING BOTTLES OF VINEGAR, BUT CAN ALSO BE USED FOR OTHER LIQUIDS: (1) VACUUM FILLER KRONES 305 VV/ SOV 04-V: BOTTLE FORMAT: 0.75/ 0.5L, BOTTLE DIMENSIONS: 78.3X242MM, OUTPUT: 7000 BOTTLES/H (2) FULLY AUTOMATIC LABELLING MACHINE KRONES ROBUSTA 722 600-10: OUTPUT: 10,000 BOTTLES/H, BOTTLE DIMENSIONS: 50-125X150-350MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-; power [ps]: 286 ; POWER [PS]: 286
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-a line for filling and packaging creams:

1. inpucker for jars , type: fes201, producer: groninger, year:2009
2. filler plus 1 mobile hopper, type: dfv 4005, producer: groninger, year: 2005
3. capper, type: mcs202l, producer: groninger, year: 2005
4. unscrambler cap, type:zsk1200 ,producer: groninger, year: 2008
5. container and elevator cap, type: de120, producer: groninger, year: 1994
6. labelling cap, type: gamma, producer: promark, year: 2010
7. depucker, type: omikron, producer: promark, year: 2010
8. labelling base label,type: gamma, producer: promark, year: 2010
9. labelling wrap label,type: gamma, producer: promark, year: 2010
10. printer, type: smart datex10, producer:markem, year: 2008
11. inpucker, type: paxinpacker, producer: unilogo, year: 2010
12. cartoning machine, type:avv, producer: cam, year: 2009
13. mechanical turning  carton, festo, year: 2011
14. overwrapper , type:bfb3701,producer: ima, year: 2008
15. shipper sealing  unit, type:sm11-s, producer: siat, year: 2005                       A LINE FOR FILLING AND PACKAGING CREAMS: 1. INPUCKER FOR JARS , TYPE: FES201, PRODUCER: GRONINGER, YEAR:2009 2. FILLER PLUS 1 MOBILE HOPPER, TYPE: DFV 4005, PRODUCER: GRONINGER, YEAR: 2005 3. CAPPER, TYPE: MCS202L, PRODUCER: GRONINGER, YEAR: 2005 4. UNSCRAMBLER CAP, TYPE:ZSK1200 ,PRODUCER: GRONINGER, YEAR: 2008 5. CONTAINER AND ELEVATOR CAP, TYPE: DE120, PRODUCER: GRONINGER, YEAR: 1994 6. LABELLING CAP, TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 7. DEPUCKER, TYPE: OMIKRON, PRODUCER: PROMARK, YEAR: 2010 8. LABELLING BASE LABEL,TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 9. LABELLING WRAP LABEL,TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 10. PRINTER, TYPE: SMART DATEX10, PRODUCER:MARKEM, YEAR: 2008 11. INPUCKER, TYPE: PAXINPACKER, PRODUCER: UNILOGO, YEAR: 2010 12. CARTONING MACHINE, TYPE:AVV, PRODUCER: CAM, YEAR: 2009 13. MECHANICAL TURNING  CARTON, FESTO, YEAR: 2011 14. OVERWRAPPER , TYPE:BFB3701,PRODUCER: IMA, YEAR: 2008 15. SHIPPER SEALING  UNIT, TYPE:SM11-S, PRODUCER: SIAT, YEAR: 2005                      
Vendedor: Biovesta
Año de construcción: usado
Ubicación: Land-; power [ps]: 318 ; POWER [PS]: 318
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-top labeler, label speed 25m / min.  TOP LABELER, LABEL SPEED 25M / MIN.
Vendedor: CBV - Chistoph Binder Verpackungsmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 460 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 1350 x 900 x 1200 mm<br/>description: ? dovetailer, dovetailing machine<br> ? serial number 970411<br> ? total installed power 2.20 kw<br> ? maximum workpiece width approx. 480 mm<br> ? workpiece length from 200 mm up to 1500 mm<br> ? drawer front thickness from 7 mm up to 60 mm<br> ? drawer side thickness from 10 mm up to 30 mm<br> ? milling template with 19 notches<br> ? distance between notches approx. 25 mm<br> ? milling motor working vertically from bellow, rotation speed 18500 rpm<br> ? 2 horizontal pneumatic clamps and 2 vertical ones WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 1350 X 900 X 1200 MM
DESCRIPTION: ? DOVETAILER, DOVETAILING MACHINE
? SERIAL NUMBER 970411
? TOTAL INSTALLED POWER 2.20 KW
? MAXIMUM WORKPIECE WIDTH APPROX. 480 MM
? WORKPIECE LENGTH FROM 200 MM UP TO 1500 MM
? DRAWER FRONT THICKNESS FROM 7 MM UP TO 60 MM
? DRAWER SIDE THICKNESS FROM 10 MM UP TO 30 MM
? MILLING TEMPLATE WITH 19 NOTCHES
? DISTANCE BETWEEN NOTCHES APPROX. 25 MM
? MILLING MOTOR WORKING VERTICALLY FROM BELLOW, ROTATION SPEED 18500 RPM
? 2 HORIZONTAL PNEUMATIC CLAMPS AND 2 VERTICAL ONES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-khs zycla fek kl 55/120-30 rm

direction: right-left

2 assemblies

pitch 120 mm 

supplies included   KHS ZYCLA FEK KL 55/120-30 RM DIRECTION: RIGHT-LEFT 2 ASSEMBLIES PITCH 120 MM SUPPLIES INCLUDED
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:455 mm<br/>workpiece length - max.:1200 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 mm<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:455 MM
WORKPIECE LENGTH - MAX.:1200 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 MM
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 3.740 €
Ubicación: Land-suitable as rundetikettierer SUITABLE AS RUNDETIKETTIERER
Vendedor: Klaus Drees
Año de construcción: usado
Ubicación: Land-internal diameter:300 mm<br/>grinding depth: mm<br/>swing diameter:300/350 mm<br/>workpiece length - max.:2300 mm<br/>table rotating:-2/+6 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:400 (fliegend, 150mm von der spindelnase) kg<br/>workhead - center taper:6 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:11 kw<br/>coolant pump:2,2 kw<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:350 (selbst zentrierend) mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:auf anfrage <br/>internal grinding spindle:auf anfrage <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:300 MM
GRINDING DEPTH: MM
SWING DIAMETER:300/350 MM
WORKPIECE LENGTH - MAX.:2300 MM
TABLE ROTATING:-2/+6 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:400 (FLIEGEND, 150MM VON DER SPINDELNASE) KG
WORKHEAD - CENTER TAPER:6 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:11 KW
COOLANT PUMP:2,2 KW
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:350 (SELBST ZENTRIEREND) MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-bier glas füller triblock, cimec cime careddu, baujahr 2011, typ 36-28-6-1-1,
36 rinserstationen / köpfe, 28 ventile, 6 kopf verschließer kronenkorken, 1 kopf naturkorker, 1 kopf verdrahter, für 26 mm + 29 mm kronenkorken, eingerichtet auf 330ml steinie/steini, 330ml apo + longneck flasche, 750ml champagner flasche.
etikettiermaschine cavagnino & gatti, baujahr 2011, typ cg 84 cl3 / 15 / 6
für bauchetiketten, rückenetiketten, halsetiketten.

beer glass filler tribloc, cimec cime careddu, made 2011, type 36-28-6-1-1,
36 rinser rinsing nozzles / heads, 28 valves, 6 head crown corker, 1 head natural corker, 1 head metal wire hooder hood, for 26 mm and 29 mm crown corks, adjusted to 330ml steinie/steini, 330ml apo + longneck bottle, 750ml champagne bottle.
labeller labelling machine, cavagnino & gatti, made 2011, type cg 84 cl3 / 15 / 6
for body, back, neck labels  BIER GLAS FüLLER TRIBLOCK, CIMEC CIME CAREDDU, BAUJAHR 2011, TYP 36-28-6-1-1, 36 RINSERSTATIONEN / KöPFE, 28 VENTILE, 6 KOPF VERSCHLIEßER KRONENKORKEN, 1 KOPF NATURKORKER, 1 KOPF VERDRAHTER, FüR 26 MM + 29 MM KRONENKORKEN, EINGERICHTET AUF 330ML STEINIE/STEINI, 330ML APO + LONGNECK FLASCHE, 750ML CHAMPAGNER FLASCHE. ETIKETTIERMASCHINE CAVAGNINO & GATTI, BAUJAHR 2011, TYP CG 84 CL3 / 15 / 6 FüR BAUCHETIKETTEN, RüCKENETIKETTEN, HALSETIKETTEN. BEER GLASS FILLER TRIBLOC, CIMEC CIME CAREDDU, MADE 2011, TYPE 36-28-6-1-1, 36 RINSER RINSING NOZZLES / HEADS, 28 VALVES, 6 HEAD CROWN CORKER, 1 HEAD NATURAL CORKER, 1 HEAD METAL WIRE HOODER HOOD, FOR 26 MM AND 29 MM CROWN CORKS, ADJUSTED TO 330ML STEINIE/STEINI, 330ML APO + LONGNECK BOTTLE, 750ML CHAMPAGNE BOTTLE. LABELLER LABELLING MACHINE, CAVAGNINO & GATTI, MADE 2011, TYPE CG 84 CL3 / 15 / 6 FOR BODY, BACK, NECK LABELS
Vendedor: Ebert Technologie GmbH
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:460 mm<br/>workpiece diameter:455 (max.) mm<br/>workpiece length - max.:1000 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 xx<br/>cnc controller:siemens 840 d <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:460 MM
WORKPIECE DIAMETER:455 (MAX.) MM
WORKPIECE LENGTH - MAX.:1000 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 XX
CNC CONTROLLER:SIEMENS 840 D
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--new
-ce certificate
-guarantee and post-guarantee service

technical parameters:

-shaft 305 mm
-shaft 3-knife

-the diameter of the cutterhead 75 mm
-4800 rpm

-the length of the table tops planing 1245mm
-max workpiece thickness on grubo?ciówce 190 mm

-motor 2, 2kw

-adjustable folding rule
-extendable worktops from gray cast iron
-a stable base for the safe position of the machine

-steel sprocket feed

-drive system on chain

-weight 50 kg more than in other companies

-the feed switch
-comfortable, combination of prze??cznikowo-wtyczkowa
-adjustable drain bell chipset
-connector to an aspirator – ø 100 mm

-big fight against misleading and output material, which ensures optimum pressure
-easy adjustment of height thickening using the knob
-precision of the column through the dual-drive
-precision machining depth adjustment with knob and scale

machine size:

-length: 140 cm
-width: 60 cm
-height: 115 cm

-weight 300 kg -NEW -CE CERTIFICATE -GUARANTEE AND POST-GUARANTEE SERVICE TECHNICAL PARAMETERS: -SHAFT 305 MM -SHAFT 3-KNIFE -THE DIAMETER OF THE CUTTERHEAD 75 MM -4800 RPM -THE LENGTH OF THE TABLE TOPS PLANING 1245MM -MAX WORKPIECE THICKNESS ON GRUBO?CIóWCE 190 MM -MOTOR 2, 2KW -ADJUSTABLE FOLDING RULE -EXTENDABLE WORKTOPS FROM GRAY CAST IRON -A STABLE BASE FOR THE SAFE POSITION OF THE MACHINE -STEEL SPROCKET FEED -DRIVE SYSTEM ON CHAIN -WEIGHT 50 KG MORE THAN IN OTHER COMPANIES -THE FEED SWITCH -COMFORTABLE, COMBINATION OF PRZE??CZNIKOWO-WTYCZKOWA -ADJUSTABLE DRAIN BELL CHIPSET -CONNECTOR TO AN ASPIRATOR – ø 100 MM -BIG FIGHT AGAINST MISLEADING AND OUTPUT MATERIAL, WHICH ENSURES OPTIMUM PRESSURE -EASY ADJUSTMENT OF HEIGHT THICKENING USING THE KNOB -PRECISION OF THE COLUMN THROUGH THE DUAL-DRIVE -PRECISION MACHINING DEPTH ADJUSTMENT WITH KNOB AND SCALE MACHINE SIZE: -LENGTH: 140 CM -WIDTH: 60 CM -HEIGHT: 115 CM -WEIGHT 300 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-anker maschinenbau labelling machine for cans, type: lw variant 5, fabrication number: 0934-97-116l, year of construction: 1997, 400 v, 50 hz, capacity: 150 labels per minute, s/s belt, belt width: 80 mm, becker vacuum pump, type: vt 3.25, total dimensions: 3600 mm x 1500 mm x 1700 mm. ANKER MASCHINENBAU LABELLING MACHINE FOR CANS, TYPE: LW VARIANT 5, FABRICATION NUMBER: 0934-97-116L, YEAR OF CONSTRUCTION: 1997, 400 V, 50 HZ, CAPACITY: 150 LABELS PER MINUTE, S/S BELT, BELT WIDTH: 80 MM, BECKER VACUUM PUMP, TYPE: VT 3.25, TOTAL DIMENSIONS: 3600 MM X 1500 MM X 1700 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 750 €
Ubicación: Land-alternative, new box bellows for trumpf l3030 siemens

-from german production (it is not an original by trump)
-y-axis (c)
-mapping: trump id: 1667805 / 939016
-new part ALTERNATIVE, NEW BOX BELLOWS FOR TRUMPF L3030 SIEMENS -FROM GERMAN PRODUCTION (IT IS NOT AN ORIGINAL BY TRUMP) -Y-AXIS (C) -MAPPING: TRUMP ID: 1667805 / 939016 -NEW PART
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Precio: used machinery auction RESALE 5.500 €
Ubicación: Land-bizerba weighing and labelling machine consisting of checkweigher, type: glm-i, number: 10106966, 230 v, 2.4 a, maximum: 6 kg, minimum: 40 gram, e = 2 gram, 2 labellers, type: ldi, number: 10572558, 230 v, 50 hz, 0.7 a and type: glm-i, number: 10106969, 230 v, 50 hz, 2.4 a, control panel, type: gt-ct, number: 10106968, last calibration: 2016, plastic belt, belt width: (1x) 296 mm and (2x) 136 mm, total dimensions: 2400 mm x 1100 mm x 1900 mm. BIZERBA WEIGHING AND LABELLING MACHINE CONSISTING OF CHECKWEIGHER, TYPE: GLM-I, NUMBER: 10106966, 230 V, 2.4 A, MAXIMUM: 6 KG, MINIMUM: 40 GRAM, E = 2 GRAM, 2 LABELLERS, TYPE: LDI, NUMBER: 10572558, 230 V, 50 HZ, 0.7 A AND TYPE: GLM-I, NUMBER: 10106969, 230 V, 50 HZ, 2.4 A, CONTROL PANEL, TYPE: GT-CT, NUMBER: 10106968, LAST CALIBRATION: 2016, PLASTIC BELT, BELT WIDTH: (1X) 296 MM AND (2X) 136 MM, TOTAL DIMENSIONS: 2400 MM X 1100 MM X 1900 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 194.000 €
Ubicación: Land-can be filled:

1 l / 10.000 fl/h / wet glue labelling / 6s-carrier

0.5 l / 12,000 fl/h / wrap sleeve labelling / 6s-carrier / 12s trays

0,33 l / 12,000 fl/h wrap sleeve labelling  / 12s trays

pet line consisting of:

(1) bottle task system, manufacturer posimat type depemat, consisting of: inlet roller conveyor, b 800 mm, l 7,000 mm, pallet lift, box location sampling system, vacuum lifters, stacking, euro pallet output magazine, transfer chute, stainless steel hopper, 1200 x 3,000 mm, strand conveyors, transfer station
year of construction: 2002

(2) 1 x belt conveying system, comprising: belt conveyor table 1200 x 3,000 mm, belt conveyors, belt width 400 mm, l 7,000 mm, belt conveyors, belt width 80 mm, l 18 m
year of construction: 1992

3) 1 x bottle unscrambler, manufacturer pace, type m500ssd, separation equipment, bottle location detection, erector, guarding
year of construction: 2002

4) 1 x belt conveyor manufacturer khs, belt width 80 mm, l 24 m
year of construction: 2002

(5) 1 x bottle filler, manufacturer khs, type rinser fr em / innofill nrf, comprising: flush head, 30 shots, circulation system, transfer conveyor, filling station, hot, 32 be filling heads, cover feeder, screw unit, switch - / control cabinet, full enclosure, ext. cip system, reservoir, capacity approx. 3,000 l, plate coolers, pumps
year of manufacture 2002

6) 1 x buffer belt, manufacturer gronemeyer, belt width 80 mm, 2 climbing arches, total length approx. 54 m
year of construction: 2002

7) 1 x recooling, manufacturer khs, plant dimensions 3,500 x 12,000 mm, h 2500 mm, mounted plate heat exchanger
year of construction: 2002

8) 1 chain conveyor, chain width 200 mm, l 7,000 mm
year of construction: 1992

9) 1 x chain conveyors, manufacturer khs, chain width 600 mm, l 9.000 mm
year of construction: 1992

10) 1 x chain conveyors, chain width 200 mm, l 6,000 mm
year of construction: 1992

11) 1 x chain conveyors, chain width of 800 mm, l 20 m, separation, crossover station
year of construction: 1992
cooling fan, year of construction: 2002

12) 1 x circulation labeler, manufacturer of krones, for bottle size 1,0 l, 2 tagging works, pressure station, hot glue factory
year of construction: 1991

13) 1 x level / label control station, manufacturer heuft type spectrum
year of construction: 1991

14) 1 x chain conveyors, chain width 500 mm, good / bad station of part of, l 19 m
year of construction: 1992

15) 1 x chain conveyors, chain width 400 mm, l 22 m
year of construction: 1992

(16) bottle inspector, manufacturer heuft, type basic, year of construction 2002
1 x bottle packaging machine, manufacturer meypack, type sw 60 m, chain conveyors, bottle separation max. 7 pcs., width 600 mm, welding mirror
year of construction: 2002

17) 1 x shrink tunnel, manufacturer meypack, type stu7840, chain conveyors
year of construction: 2002

18) manufacturer sft, 1 x chain conveyors, chain width of 400 mm, l 25 m
year of construction: 1992/2002 (obsolete 2002)

19) 1 x carrying handle station, feed conveyors, film recording, roll width of maximum 400 mm, clamping station, deflection unit, ver gluing station, guarding, control
manufacturers project, progrip type es-40, year of construction 2002

20) 1 x labeler, manufacturer weber, type 5200 top labeling
year of construction: 2006

21) 1 x chain conveyors, manufacturer sft, chain width 300 mm, l 9.000 mm
year of construction: 1992/2002 (obsolete 2002)

22) 1 x chain conveyors, manufacturer sft, chain width of 400 mm, switch station, l 33 m
year of construction: 1992/2002 (obsolete 2002)

23) manufacturer sft, 1 x belt conveyors, belt width 600 mm, l 2,800 mm
year of construction 1992/2002 (obsolete 2002)

24) 1 x solution tank, manufacturer: sailors, capacity 38,000 l, isolated, standing
year of construction: 1991

25) 1 x cip system, manufacturer bertuzzi, type pdrc00, reservoir, capacity approx. 5,000 litres, manhole, recording frame, sight glass, electric pump, switching / control cabinet, external plate cooler
year of construction: 2002

26) 1 x traypacker, manufacturer meypack, type sw 60 d, with packing station, foil 400 mm, infeed belt conveyor
type vp-410 k
year of construction: 2002
shrink tunnel, type sw 60 d, year of construction 2003
labeller, manufacturer weber, type 5200ce, year of construction 2002

(27) europe latvians magazine, separation station, transfer roller, manufacturer kettner, year of construction 1992

(28) palletizing plant, manufacturer meypack: cardboard magazine, vacuum separation, bottle to carry strap, collecting station, tray turning station, cross moving table, decrease hub portal, transfer roller, stretch film plant, film width 600 mm, to strapping height of maximum 2000 mm , circulation system, output roller conveyor, guarding, photoelectric tracking, switching / control unit
year of construction: 2006

pet-line available: as of 01.04.2019 CAN BE FILLED: 1 L / 10.000 FL/H / WET GLUE LABELLING / 6S-CARRIER 0.5 L / 12,000 FL/H / WRAP SLEEVE LABELLING / 6S-CARRIER / 12S TRAYS 0,33 L / 12,000 FL/H WRAP SLEEVE LABELLING / 12S TRAYS PET LINE CONSISTING OF: (1) BOTTLE TASK SYSTEM, MANUFACTURER POSIMAT TYPE DEPEMAT, CONSISTING OF: INLET ROLLER CONVEYOR, B 800 MM, L 7,000 MM, PALLET LIFT, BOX LOCATION SAMPLING SYSTEM, VACUUM LIFTERS, STACKING, EURO PALLET OUTPUT MAGAZINE, TRANSFER CHUTE, STAINLESS STEEL HOPPER, 1200 X 3,000 MM, STRAND CONVEYORS, TRANSFER STATION YEAR OF CONSTRUCTION: 2002 (2) 1 X BELT CONVEYING SYSTEM, COMPRISING: BELT CONVEYOR TABLE 1200 X 3,000 MM, BELT CONVEYORS, BELT WIDTH 400 MM, L 7,000 MM, BELT CONVEYORS, BELT WIDTH 80 MM, L 18 M YEAR OF CONSTRUCTION: 1992 3) 1 X BOTTLE UNSCRAMBLER, MANUFACTURER PACE, TYPE M500SSD, SEPARATION EQUIPMENT, BOTTLE LOCATION DETECTION, ERECTOR, GUARDING YEAR OF CONSTRUCTION: 2002 4) 1 X BELT CONVEYOR MANUFACTURER KHS, BELT WIDTH 80 MM, L 24 M YEAR OF CONSTRUCTION: 2002 (5) 1 X BOTTLE FILLER, MANUFACTURER KHS, TYPE RINSER FR EM / INNOFILL NRF, COMPRISING: FLUSH HEAD, 30 SHOTS, CIRCULATION SYSTEM, TRANSFER CONVEYOR, FILLING STATION, HOT, 32 BE FILLING HEADS, COVER FEEDER, SCREW UNIT, SWITCH - / CONTROL CABINET, FULL ENCLOSURE, EXT. CIP SYSTEM, RESERVOIR, CAPACITY APPROX. 3,000 L, PLATE COOLERS, PUMPS YEAR OF MANUFACTURE 2002 6) 1 X BUFFER BELT, MANUFACTURER GRONEMEYER, BELT WIDTH 80 MM, 2 CLIMBING ARCHES, TOTAL LENGTH APPROX. 54 M YEAR OF CONSTRUCTION: 2002 7) 1 X RECOOLING, MANUFACTURER KHS, PLANT DIMENSIONS 3,500 X 12,000 MM, H 2500 MM, MOUNTED PLATE HEAT EXCHANGER YEAR OF CONSTRUCTION: 2002 8) 1 CHAIN CONVEYOR, CHAIN WIDTH 200 MM, L 7,000 MM YEAR OF CONSTRUCTION: 1992 9) 1 X CHAIN CONVEYORS, MANUFACTURER KHS, CHAIN WIDTH 600 MM, L 9.000 MM YEAR OF CONSTRUCTION: 1992 10) 1 X CHAIN CONVEYORS, CHAIN WIDTH 200 MM, L 6,000 MM YEAR OF CONSTRUCTION: 1992 11) 1 X CHAIN CONVEYORS, CHAIN WIDTH OF 800 MM, L 20 M, SEPARATION, CROSSOVER STATION YEAR OF CONSTRUCTION: 1992 COOLING FAN, YEAR OF CONSTRUCTION: 2002 12) 1 X CIRCULATION LABELER, MANUFACTURER OF KRONES, FOR BOTTLE SIZE 1,0 L, 2 TAGGING WORKS, PRESSURE STATION, HOT GLUE FACTORY YEAR OF CONSTRUCTION: 1991 13) 1 X LEVEL / LABEL CONTROL STATION, MANUFACTURER HEUFT TYPE SPECTRUM YEAR OF CONSTRUCTION: 1991 14) 1 X CHAIN CONVEYORS, CHAIN WIDTH 500 MM, GOOD / BAD STATION OF PART OF, L 19 M YEAR OF CONSTRUCTION: 1992 15) 1 X CHAIN CONVEYORS, CHAIN WIDTH 400 MM, L 22 M YEAR OF CONSTRUCTION: 1992 (16) BOTTLE INSPECTOR, MANUFACTURER HEUFT, TYPE BASIC, YEAR OF CONSTRUCTION 2002 1 X BOTTLE PACKAGING MACHINE, MANUFACTURER MEYPACK, TYPE SW 60 M, CHAIN CONVEYORS, BOTTLE SEPARATION MAX. 7 PCS., WIDTH 600 MM, WELDING MIRROR YEAR OF CONSTRUCTION: 2002 17) 1 X SHRINK TUNNEL, MANUFACTURER MEYPACK, TYPE STU7840, CHAIN CONVEYORS YEAR OF CONSTRUCTION: 2002 18) MANUFACTURER SFT, 1 X CHAIN CONVEYORS, CHAIN WIDTH OF 400 MM, L 25 M YEAR OF CONSTRUCTION: 1992/2002 (OBSOLETE 2002) 19) 1 X CARRYING HANDLE STATION, FEED CONVEYORS, FILM RECORDING, ROLL WIDTH OF MAXIMUM 400 MM, CLAMPING STATION, DEFLECTION UNIT, VER GLUING STATION, GUARDING, CONTROL MANUFACTURERS PROJECT, PROGRIP TYPE ES-40, YEAR OF CONSTRUCTION 2002 20) 1 X LABELER, MANUFACTURER WEBER, TYPE 5200 TOP LABELING YEAR OF CONSTRUCTION: 2006 21) 1 X CHAIN CONVEYORS, MANUFACTURER SFT, CHAIN WIDTH 300 MM, L 9.000 MM YEAR OF CONSTRUCTION: 1992/2002 (OBSOLETE 2002) 22) 1 X CHAIN CONVEYORS, MANUFACTURER SFT, CHAIN WIDTH OF 400 MM, SWITCH STATION, L 33 M YEAR OF CONSTRUCTION: 1992/2002 (OBSOLETE 2002) 23) MANUFACTURER SFT, 1 X BELT CONVEYORS, BELT WIDTH 600 MM, L 2,800 MM YEAR OF CONSTRUCTION 1992/2002 (OBSOLETE 2002) 24) 1 X SOLUTION TANK, MANUFACTURER: SAILORS, CAPACITY 38,000 L, ISOLATED, STANDING YEAR OF CONSTRUCTION: 1991 25) 1 X CIP SYSTEM, MANUFACTURER BERTUZZI, TYPE PDRC00, RESERVOIR, CAPACITY APPROX. 5,000 LITRES, MANHOLE, RECORDING FRAME, SIGHT GLASS, ELECTRIC PUMP, SWITCHING / CONTROL CABINET, EXTERNAL PLATE COOLER YEAR OF CONSTRUCTION: 2002 26) 1 X TRAYPACKER, MANUFACTURER MEYPACK, TYPE SW 60 D, WITH PACKING STATION, FOIL 400 MM, INFEED BELT CONVEYOR TYPE VP-410 K YEAR OF CONSTRUCTION: 2002 SHRINK TUNNEL, TYPE SW 60 D, YEAR OF CONSTRUCTION 2003 LABELLER, MANUFACTURER WEBER, TYPE 5200CE, YEAR OF CONSTRUCTION 2002 (27) EUROPE LATVIANS MAGAZINE, SEPARATION STATION, TRANSFER ROLLER, MANUFACTURER KETTNER, YEAR OF CONSTRUCTION 1992 (28) PALLETIZING PLANT, MANUFACTURER MEYPACK: CARDBOARD MAGAZINE, VACUUM SEPARATION, BOTTLE TO CARRY STRAP, COLLECTING STATION, TRAY TURNING STATION, CROSS MOVING TABLE, DECREASE HUB PORTAL, TRANSFER ROLLER, STRETCH FILM PLANT, FILM WIDTH 600 MM, TO STRAPPING HEIGHT OF MAXIMUM 2000 MM , CIRCULATION SYSTEM, OUTPUT ROLLER CONVEYOR, GUARDING, PHOTOELECTRIC TRACKING, SWITCHING / CONTROL UNIT YEAR OF CONSTRUCTION: 2006 PET-LINE AVAILABLE: AS OF 01.04.2019
Vendedor: MVRG UG (haftungsbeschränkt) & Co. KG
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-labeling machine for the work or as spare parts.
all data, please refer to the enclosed nameplate. LABELING MACHINE FOR THE WORK OR AS SPARE PARTS. ALL DATA, PLEASE REFER TO THE ENCLOSED NAMEPLATE.
Vendedor: MANNOTT
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-enveloping machine
manufacturer: bell & howel
model: jpo post star jumbo
year: unknown
equipment: conveyor with 6 stations, delivery, feeder for din long
location: germany
price: on request  ENVELOPING MACHINE MANUFACTURER: BELL & HOWEL MODEL: JPO POST STAR JUMBO YEAR: UNKNOWN EQUIPMENT: CONVEYOR WITH 6 STATIONS, DELIVERY, FEEDER FOR DIN LONG LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BELL types: