74493 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 24.000 €
Ubicación: Land-flat grinding machine, almost unused, condition almost like new

manufacturer bernardo
    type bsg 4080 ahd
    year 2014
    almost unused, absolutely mint condition, estimated about 50 operating hours

electric magnetic clamping plate 800 x 400 mm
    table size approx. 910 x 405 mm
    travel in x 900 mm
    travel in y 450 mm
    holder diameter 400 mm
    maximum workpiece height 370 mm
    maximum work-piece weight 500 kg

with micrometer-carbide pulley puller
    hydraulic feed in x (longitudinal) 7 up to 23 meters per minute
    feed in y 0.1 to 8 mm per stroke
    automatic vertical (z) - delivery: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 and 0.05 mm

accessories:
    flow filter grinding oil treatment
    hydraulic unit with oil cooling
    digital display bernardo sds6-2v

dimensions and weights:

basic machine
    w x d x h in cm: 270 x 230 x 190
    weight of 3,400 kg

fine filter: l x w 140 cm x 80 cm

hydraulic unit l x w 70 x 60 cm
  FLAT GRINDING MACHINE, ALMOST UNUSED, CONDITION ALMOST LIKE NEW MANUFACTURER BERNARDO TYPE BSG 4080 AHD YEAR 2014 ALMOST UNUSED, ABSOLUTELY MINT CONDITION, ESTIMATED ABOUT 50 OPERATING HOURS ELECTRIC MAGNETIC CLAMPING PLATE 800 X 400 MM TABLE SIZE APPROX. 910 X 405 MM TRAVEL IN X 900 MM TRAVEL IN Y 450 MM HOLDER DIAMETER 400 MM MAXIMUM WORKPIECE HEIGHT 370 MM MAXIMUM WORK-PIECE WEIGHT 500 KG WITH MICROMETER-CARBIDE PULLEY PULLER HYDRAULIC FEED IN X (LONGITUDINAL) 7 UP TO 23 METERS PER MINUTE FEED IN Y 0.1 TO 8 MM PER STROKE AUTOMATIC VERTICAL (Z) - DELIVERY: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 AND 0.05 MM ACCESSORIES: FLOW FILTER GRINDING OIL TREATMENT HYDRAULIC UNIT WITH OIL COOLING DIGITAL DISPLAY BERNARDO SDS6-2V DIMENSIONS AND WEIGHTS: BASIC MACHINE W X D X H IN CM: 270 X 230 X 190 WEIGHT OF 3,400 KG FINE FILTER: L X W 140 CM X 80 CM HYDRAULIC UNIT L X W 70 X 60 CM
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-<strong>state: machine will be refurbished
</strong>

ix-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> STATE: MACHINE WILL BE REFURBISHED IX-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-industrial fans in various power ranges and sizes, hall ventilation extraction, etc. great items available in stock. contact us for more information or questions.  INDUSTRIAL FANS IN VARIOUS POWER RANGES AND SIZES, HALL VENTILATION EXTRACTION, ETC. GREAT ITEMS AVAILABLE IN STOCK. CONTACT US FOR MORE INFORMATION OR QUESTIONS.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 34.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-perkins diesel power generator used see pictures. PERKINS DIESEL POWER GENERATOR USED SEE PICTURES.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 45.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-bj 01/1996
motor mde
480v
460kva
360kw
541a BJ 01/1996 MOTOR MDE 480V 460KVA 360KW 541A
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 66.600 EU€
Ubicación: Land-the machine worked from the news for about a year, it was later dismantled. since then stored in a heated hall, protected from dust. inability to install and test the machines in action. based on visual inspection found the completeness of the device. THE MACHINE WORKED FROM THE NEWS FOR ABOUT A YEAR, IT WAS LATER DISMANTLED. SINCE THEN STORED IN A HEATED HALL, PROTECTED FROM DUST. INABILITY TO INSTALL AND TEST THE MACHINES IN ACTION. BASED ON VISUAL INSPECTION FOUND THE COMPLETENESS OF THE DEVICE.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-manufacturer:
leroy somer generator sets
model:
lsa 46.1 m5 c6/4
condition: used
bj:
1995

cooling:
water cooled
tension:
400v 120kw
 MANUFACTURER: LEROY SOMER GENERATOR SETS MODEL: LSA 46.1 M5 C6/4 CONDITION: USED BJ: 1995 COOLING: WATER COOLED TENSION: 400V 120KW
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 60.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-we have always several used electric motors in stock. we provide detailed information on request. WE HAVE ALWAYS SEVERAL USED ELECTRIC MOTORS IN STOCK. WE PROVIDE DETAILED INFORMATION ON REQUEST.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 35.200 EU€
Ubicación: Land-the machine is designed for grinding simple wooden elements placed in line. THE MACHINE IS DESIGNED FOR GRINDING SIMPLE WOODEN ELEMENTS PLACED IN LINE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-currently 2 x in stock
krahnhubwerk bj 1980 mannesmann demag p625 h8 2 line
weight 5000 kg
lifting height 8 m
lifting speed 8/0, 8 m / min

used CURRENTLY 2 X IN STOCK KRAHNHUBWERK BJ 1980 MANNESMANN DEMAG P625 H8 2 LINE WEIGHT 5000 KG LIFTING HEIGHT 8 M LIFTING SPEED 8/0, 8 M / MIN USED
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 112.500 EU€
Ubicación: Land-machine designed for vertical wells. it is used in construction works. during the inspection no malfunctions or shortages were found in the equipment or equipment (except batteries). MACHINE DESIGNED FOR VERTICAL WELLS. IT IS USED IN CONSTRUCTION WORKS. DURING THE INSPECTION NO MALFUNCTIONS OR SHORTAGES WERE FOUND IN THE EQUIPMENT OR EQUIPMENT (EXCEPT BATTERIES).
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 900 €
Ubicación: Land-currently we have  20 x siemens sitrans p 7mf4533 sensors in stock. pressure messurement transmitter. price/unit if you by more then one part we will mak you an offer.  CURRENTLY WE HAVE 20 X SIEMENS SITRANS P 7MF4533 SENSORS IN STOCK. PRESSURE MESSUREMENT TRANSMITTER. PRICE/UNIT IF YOU BY MORE THEN ONE PART WE WILL MAK YOU AN OFFER.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 31.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-width 400 mm WIDTH 400 MM
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Precio: 20.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-tip height: 300 / 330 mm
top width: 3000 mm
speed range: 12-600 rpm
spindle bore: 83 mm
total power: 7.5 kw / 380 v
machine weight: about 5000 kg

equipment / accessories

4 jaw chuck
1 festst. lynette
mitlfd. lathe
4 way toolpost
chip protection tray
coolant system

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in our factory under power.
 TIP HEIGHT: 300 / 330 MM TOP WIDTH: 3000 MM SPEED RANGE: 12-600 RPM SPINDLE BORE: 83 MM TOTAL POWER: 7.5 KW / 380 V MACHINE WEIGHT: ABOUT 5000 KG EQUIPMENT / ACCESSORIES 4 JAW CHUCK 1 FESTST. LYNETTE MITLFD. LATHE 4 WAY TOOLPOST CHIP PROTECTION TRAY COOLANT SYSTEM ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-http://www.kennedymachines.com/photo/maszyny/906_2.jpg HTTP://WWW.KENNEDYMACHINES.COM/PHOTO/MASZYNY/906_2.JPG
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 45.000 €
Ubicación: Land-control                                   heidenhain plus it
circular diameter max.                    505 mm 
swing over plan guide                     375 mm 
travel plan (x)                           250 mm
longitudinal travel (z)                   635 mm 
spindle integrated spindle motor, power 40/100%ed 28/21 kw 
spindle head (flat flange)                5 170 h 
spindle diameter in front bearing         130 mm 
torque max (40 / 100%)                    320/240 nm
speed range                          25-5,000 rpm
number of tool stations of the tool carrier 12
shank according to din 69880              30 mm
tailstock hub automatically movable      580 mm
weight of the machine with chip conveyor 5,600 kg
dimensions l/w/h 4,3 m / 2,022 m / 1.77 m

accessories: feeder imeca master 880 mp-e

 CONTROL HEIDENHAIN PLUS IT CIRCULAR DIAMETER MAX. 505 MM SWING OVER PLAN GUIDE 375 MM TRAVEL PLAN (X) 250 MM LONGITUDINAL TRAVEL (Z) 635 MM SPINDLE INTEGRATED SPINDLE MOTOR, POWER 40/100%ED 28/21 KW SPINDLE HEAD (FLAT FLANGE) 5 170 H SPINDLE DIAMETER IN FRONT BEARING 130 MM TORQUE MAX (40 / 100%) 320/240 NM SPEED RANGE 25-5,000 RPM NUMBER OF TOOL STATIONS OF THE TOOL CARRIER 12 SHANK ACCORDING TO DIN 69880 30 MM TAILSTOCK HUB AUTOMATICALLY MOVABLE 580 MM WEIGHT OF THE MACHINE WITH CHIP CONVEYOR 5,600 KG DIMENSIONS L/W/H 4,3 M / 2,022 M / 1.77 M ACCESSORIES: FEEDER IMECA MASTER 880 MP-E
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 2.825 EU€
Ubicación: Land-pneumatic table for whipping euro epal 80 x 120 pallets, allows for correct placement of nailed elements and precise nailing of nails in predetermined positions. PNEUMATIC TABLE FOR WHIPPING EURO EPAL 80 X 120 PALLETS, ALLOWS FOR CORRECT PLACEMENT OF NAILED ELEMENTS AND PRECISE NAILING OF NAILS IN PREDETERMINED POSITIONS.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-

complete krones pet water filling line

line in production

brand name : krones
year : 2007-2006 ,  
capacity is  36,000bhp. 
krones  2007key assetkrones blowing machine air conditionerhandheld thermal imager 
krones blowing machine
air compressorblowing machine coveyerkrones 550ml 
moulding krones , 600ml 
moulding krones 
coveyer  krones 

filling machine krones 
labeller film wrapping machinewater treatment line.
air compressor weigh checking jet ink printer cip system coveyer dryer beltliquid nitrogen machine  
krones water level check packing machine  
krones filterlable checker  krones control cabinet 
krones full automatic sprinkling device laser marker led counterkrones scale  krones vernier caliper  
for the krones water line, 36,000bph, 
built in 2007, still running. any questions, please let me know. 
ask for picttures.

rgds
     COMPLETE KRONES PET WATER FILLING LINE LINE IN PRODUCTION BRAND NAME : KRONES YEAR : 2007-2006 , CAPACITY IS 36,000BHP. KRONES 2007KEY ASSETKRONES BLOWING MACHINE AIR CONDITIONERHANDHELD THERMAL IMAGER KRONES BLOWING MACHINE AIR COMPRESSORBLOWING MACHINE COVEYERKRONES 550ML MOULDING KRONES , 600ML MOULDING KRONES COVEYER KRONES FILLING MACHINE KRONES LABELLER FILM WRAPPING MACHINEWATER TREATMENT LINE. AIR COMPRESSOR WEIGH CHECKING JET INK PRINTER CIP SYSTEM COVEYER DRYER BELTLIQUID NITROGEN MACHINE KRONES WATER LEVEL CHECK PACKING MACHINE KRONES FILTERLABLE CHECKER KRONES CONTROL CABINET KRONES FULL AUTOMATIC SPRINKLING DEVICE LASER MARKER LED COUNTERKRONES SCALE KRONES VERNIER CALIPER FOR THE KRONES WATER LINE, 36,000BPH, BUILT IN 2007, STILL RUNNING. ANY QUESTIONS, PLEASE LET ME KNOW. ASK FOR PICTTURES. RGDS
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Precio: 76.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-used ball mill coal pulverizing or limestone grinding

ball mill 200kw
extraction
filter
burner
documentation USED BALL MILL COAL PULVERIZING OR LIMESTONE GRINDING BALL MILL 200KW EXTRACTION FILTER BURNER DOCUMENTATION
Vendedor: HTS GmbH
Año de construcción: usado
Precio: 76.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-very little used frame and drilling machine series of gannomat

specifically to the dowel hole drilling at two levels in one clamping
drill level pneumatically adjustable

motor 1,5 kw, 2800 rpm
start the engine with practical handle switch
two-jaw chuck rã¶hm 1 to 20 mm
maximum height approx. 100 mm
maximum stroke 150 mm
cross adjustment 320 mm continuously variable
2 pneumatic workpiece clamping system
grid rail for quick adjustment side to side, scanning 12 mm
stroke length adjustment with recesses
suction pipe
center stop
double bevel stop adjustable from 0 to 60 degrees
height adjustment for upper and lower level with mechanical digital display and pneumatic switching
two way adjustable work-piece supports role

a high-quality universal drilling machine for many applications
obviously extremely rarely used, see photos. comes from a small assembly operation.

ce mark

dimensions approx. 1000 x 900 x 1250 mm (lxwxh). weight approx. 300kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". VERY LITTLE USED FRAME AND DRILLING MACHINE SERIES OF GANNOMAT SPECIFICALLY TO THE DOWEL HOLE DRILLING AT TWO LEVELS IN ONE CLAMPING DRILL LEVEL PNEUMATICALLY ADJUSTABLE MOTOR 1,5 KW, 2800 RPM START THE ENGINE WITH PRACTICAL HANDLE SWITCH TWO-JAW CHUCK R&ATILDE;&PARA;HM 1 TO 20 MM MAXIMUM HEIGHT APPROX. 100 MM MAXIMUM STROKE 150 MM CROSS ADJUSTMENT 320 MM CONTINUOUSLY VARIABLE 2 PNEUMATIC WORKPIECE CLAMPING SYSTEM GRID RAIL FOR QUICK ADJUSTMENT SIDE TO SIDE, SCANNING 12 MM STROKE LENGTH ADJUSTMENT WITH RECESSES SUCTION PIPE CENTER STOP DOUBLE BEVEL STOP ADJUSTABLE FROM 0 TO 60 DEGREES HEIGHT ADJUSTMENT FOR UPPER AND LOWER LEVEL WITH MECHANICAL DIGITAL DISPLAY AND PNEUMATIC SWITCHING TWO WAY ADJUSTABLE WORK-PIECE SUPPORTS ROLE A HIGH-QUALITY UNIVERSAL DRILLING MACHINE FOR MANY APPLICATIONS OBVIOUSLY EXTREMELY RARELY USED, SEE PHOTOS. COMES FROM A SMALL ASSEMBLY OPERATION. CE MARK DIMENSIONS APPROX. 1000 X 900 X 1250 MM (LXWXH). WEIGHT APPROX. 300KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 4.620 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 1.600 €
Ubicación: Land-model mex 045
bj 1988
version 64/10/alf
flow rate 6.4
condensed ultimate pressure 10 bar
engine power 45kw
maximum operating speed 2985u/min MODEL MEX 045 BJ 1988 VERSION 64/10/ALF FLOW RATE 6.4 CONDENSED ULTIMATE PRESSURE 10 BAR ENGINE POWER 45KW MAXIMUM OPERATING SPEED 2985U/MIN
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Ubicación: Land-continuous reactor in-line dispersing machine (1x), make kotthoff, type ms-3d, no 31859, new 1977, reconditioned in 2004 by fluko, material stainless steel, rotor sizes dia. 280x300mm, with jacket, with mechanical seal, motor 24,0 kw, 500 volt (ex), extra specifications - has not been used after reconditioning (new mechanical seal and bearings) in 2004continuous reactorsmixers > continuous reactors CONTINUOUS REACTOR IN-LINE DISPERSING MACHINE (1X), MAKE KOTTHOFF, TYPE MS-3D, NO 31859, NEW 1977, RECONDITIONED IN 2004 BY FLUKO, MATERIAL STAINLESS STEEL, ROTOR SIZES DIA. 280X300MM, WITH JACKET, WITH MECHANICAL SEAL, MOTOR 24,0 KW, 500 VOLT (EX), EXTRA SPECIFICATIONS - HAS NOT BEEN USED AFTER RECONDITIONING (NEW MECHANICAL SEAL AND BEARINGS) IN 2004CONTINUOUS REACTORSMIXERS > CONTINUOUS REACTORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-control ultimax 4
travel x / y / z 1060/610/610 mm
spindle speed 10000 1 / min
tool magazine for 40 tools sk40
internal coolant
4th axis
chip conveyor  CONTROL ULTIMAX 4 TRAVEL X / Y / Z 1060/610/610 MM SPINDLE SPEED 10000 1 / MIN TOOL MAGAZINE FOR 40 TOOLS SK40 INTERNAL COOLANT 4TH AXIS CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-grinder, pin disc mill, make alpine augsburg, type a-400 cw contraplex weitkammer, no 128316, new 1963, material mild steel, 2 driven rotors, rotor size dia. 400mm, number of pins on door side: 134 stk, house size +/- 1100x1350mm, motor 11,0 kw (housing) + 30 kw (door), 380/660 volt, with switchgear, floorspace 1,9x1,0m, total height 1,3m, weight 1500kg, extra specifications +++ revised +++size reduction millsgrinders > size reduction mills GRINDER, PIN DISC MILL, MAKE ALPINE AUGSBURG, TYPE A-400 CW CONTRAPLEX WEITKAMMER, NO 128316, NEW 1963, MATERIAL MILD STEEL, 2 DRIVEN ROTORS, ROTOR SIZE DIA. 400MM, NUMBER OF PINS ON DOOR SIDE: 134 STK, HOUSE SIZE +/- 1100X1350MM, MOTOR 11,0 KW (HOUSING) + 30 KW (DOOR), 380/660 VOLT, WITH SWITCHGEAR, FLOORSPACE 1,9X1,0M, TOTAL HEIGHT 1,3M, WEIGHT 1500KG, EXTRA SPECIFICATIONS +++ REVISED +++SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-it is a used shop equipment - sales counter for sale from site fichtenau.
the interior is like new and was used only two months.
the charging device is sold in the sales order. 

price on request. IT IS A USED SHOP EQUIPMENT - SALES COUNTER FOR SALE FROM SITE FICHTENAU. THE INTERIOR IS LIKE NEW AND WAS USED ONLY TWO MONTHS. THE CHARGING DEVICE IS SOLD IN THE SALES ORDER. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: 150 €
Ubicación: Land-NL Netherlands, 4731T Oudenbosch
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-glue specification unit for dowel holes and rueckwandnuten

a video of the current machine can be sent on request.

with an ergonomic lighter gun to the stating of glue in dowel holes etc.
closed glue system, this little cleaning effort
stainless steel tank for 5 l glue
stainless steel tank for 5 l of water (to clean)
rinsing process takes only about 1 minute!
selector water / glue for fast commissioning and cleaning
glue quantity easy selector switch adjustable interval trigger for constant adjustable quantity of glue or permanent operation
ideal complement to an automated drilling and dowel system.
electrical connection 230 volt
6 bar air connection
ce mark
operating instructions
original condition in the photos
has been used very little, looks almost like new.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". GLUE SPECIFICATION UNIT FOR DOWEL HOLES AND RUECKWANDNUTEN A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. WITH AN ERGONOMIC LIGHTER GUN TO THE STATING OF GLUE IN DOWEL HOLES ETC. CLOSED GLUE SYSTEM, THIS LITTLE CLEANING EFFORT STAINLESS STEEL TANK FOR 5 L GLUE STAINLESS STEEL TANK FOR 5 L OF WATER (TO CLEAN) RINSING PROCESS TAKES ONLY ABOUT 1 MINUTE! SELECTOR WATER / GLUE FOR FAST COMMISSIONING AND CLEANING GLUE QUANTITY EASY SELECTOR SWITCH ADJUSTABLE INTERVAL TRIGGER FOR CONSTANT ADJUSTABLE QUANTITY OF GLUE OR PERMANENT OPERATION IDEAL COMPLEMENT TO AN AUTOMATED DRILLING AND DOWEL SYSTEM. ELECTRICAL CONNECTION 230 VOLT 6 BAR AIR CONNECTION CE MARK OPERATING INSTRUCTIONS ORIGINAL CONDITION IN THE PHOTOS HAS BEEN USED VERY LITTLE, LOOKS ALMOST LIKE NEW. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 250 €
Ubicación: Land-NL Netherlands, 4731T Oudenbosch
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-1 piece cnc band sawing machine
make: kasto twin ae4
with heavy load conveyor
cutting capacity: 400 x 400 mm smallest cut dimensions: ã? 10 mm smallest section length: 6 mm cutting speed, continuous: 20-100 m / min
control: compact control 1 PIECE CNC BAND SAWING MACHINE MAKE: KASTO TWIN AE4 WITH HEAVY LOAD CONVEYOR CUTTING CAPACITY: 400 X 400 MM SMALLEST CUT DIMENSIONS: &ATILDE;? 10 MM SMALLEST SECTION LENGTH: 6 MM CUTTING SPEED, CONTINUOUS: 20-100 M / MIN CONTROL: COMPACT CONTROL
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 32.500 €
Ubicación: Land-; power [ps]: 1435; gross weight [kg]: 12500; engine: caterpillar g3516; accessories: control panel ; POWER [PS]: 1435; GROSS WEIGHT [KG]: 12500; ENGINE: CATERPILLAR G3516; ACCESSORIES: CONTROL PANEL
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-it is a used boku spiral mixer sk 80 (for 80kg of dough) for sale.
the machine is in the state of bakery, fully functional and runs quietly.
on request, a video can be sent to from the test run. IT IS A USED BOKU SPIRAL MIXER SK 80 (FOR 80KG OF DOUGH) FOR SALE. THE MACHINE IS IN THE STATE OF BAKERY, FULLY FUNCTIONAL AND RUNS QUIETLY. ON REQUEST, A VIDEO CAN BE SENT TO FROM THE TEST RUN.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: 7.500 €
Ubicación: Land-ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm; accessories: ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM; ACCESSORIES: GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-bystronic xpert 200x4100 (2012)

overview
brand: bystronic
model: xpert 200x4100
application type: bending
machine type: bending machines
availability: immediately
production year: 2012
location: italy
origin country: germany
production hours: 12567

general data
machine weight: 17600 kg

control unit
interface: microsoft windows xp

main drive
pressing force: 2000 kn
bending length: 4100 mm
main motor power: 18.5 kw
stroke: 415 mm

media
main electronic connection: 400 v
power consumption: 22 kw
air pressure: 8 bar

additional equipment
1: tools
2: fast bend+  BYSTRONIC XPERT 200X4100 (2012) OVERVIEW BRAND: BYSTRONIC MODEL: XPERT 200X4100 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2012 LOCATION: ITALY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 12567 GENERAL DATA MACHINE WEIGHT: 17600 KG CONTROL UNIT INTERFACE: MICROSOFT WINDOWS XP MAIN DRIVE PRESSING FORCE: 2000 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 18.5 KW STROKE: 415 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 22 KW AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS 2: FAST BEND+
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-hollande ijssel dredger rake; accessories: hollande ijssel dredger rake, 250mm HOLLANDE IJSSEL DREDGER RAKE; ACCESSORIES: HOLLANDE IJSSEL DREDGER RAKE, 250MM
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-beyeler pr6 (2000)

overview
brand: beyeler
model: pr6
application type: bending
machine type: bending machines
availability: immediately
production year: 2000
location: italy
origin country: germany

general data
machine weight: 23400 kg

control unit
brand: cybelec
model: dnc 1200

main drive
pressing force: 3200 kn
bending length: 4100 mm
main motor power: 22 kw
stroke: 365 mm

media
main electronic connection: 400 v
air pressure: 8 bar

additional equipment
1: tools BEYELER PR6 (2000) OVERVIEW BRAND: BEYELER MODEL: PR6 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2000 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA MACHINE WEIGHT: 23400 KG CONTROL UNIT BRAND: CYBELEC MODEL: DNC 1200 MAIN DRIVE PRESSING FORCE: 3200 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 22 KW STROKE: 365 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-200mm dredge head, cutterhead, dredger head; engine: hollandse ijssel; accessories: 200mm dredge head, cutterhead, dredger head 200MM DREDGE HEAD, CUTTERHEAD, DREDGER HEAD; ENGINE: HOLLANDSE IJSSEL; ACCESSORIES: 200MM DREDGE HEAD, CUTTERHEAD, DREDGER HEAD
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 400 €
Ubicación: Land-bj: 1996 type sv5 690/1/01 capacity at 2800 1/min 690 m³/h at 3300 1/min 900 m³
  BJ: 1996 TYPE SV5 690/1/01 CAPACITY AT 2800 1/MIN 690 M³/H AT 3300 1/MIN 900 M³
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Precio: 2.250 €
Ubicación: Land-; gross weight [kg]: 1000 ; GROSS WEIGHT [KG]: 1000
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-code: 0475
brand: striebig
model: standard trk 6220  - ce standard 

manual vertical panel saw   - ce standard 

integrated vacuum system
large wood supporting surface with  n°6  pre-defined cutting points  for  vertical cut - the horizontal cut is possible in any position. the wood support is movable in vertical  and automatically moves  depending on the blade position
lenght of cut mm 5300
height of cut mm 2200
depth of cut  mm 80
supporting rollers for panels movement 
locking device for small parts 
blade diameter mm 300  - hole  30
speed  4750   rpm 
motor power  kw 5,5 - exhaust outlet diameter mm 160
overall dimensions mounted machine  : mm 6675 x  1600 x  3000 h 
weight kg  950 CODE: 0475 BRAND: STRIEBIG MODEL: STANDARD TRK 6220 - CE STANDARD MANUAL VERTICAL PANEL SAW - CE STANDARD INTEGRATED VACUUM SYSTEM LARGE WOOD SUPPORTING SURFACE WITH N°6 PRE-DEFINED CUTTING POINTS FOR VERTICAL CUT - THE HORIZONTAL CUT IS POSSIBLE IN ANY POSITION. THE WOOD SUPPORT IS MOVABLE IN VERTICAL AND AUTOMATICALLY MOVES DEPENDING ON THE BLADE POSITION LENGHT OF CUT MM 5300 HEIGHT OF CUT MM 2200 DEPTH OF CUT MM 80 SUPPORTING ROLLERS FOR PANELS MOVEMENT LOCKING DEVICE FOR SMALL PARTS BLADE DIAMETER MM 300 - HOLE 30 SPEED 4750 RPM MOTOR POWER KW 5,5 - EXHAUST OUTLET DIAMETER MM 160 OVERALL DIMENSIONS MOUNTED MACHINE : MM 6675 X 1600 X 3000 H WEIGHT KG 950
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; gross weight [kg]: 16000; engine: mercedes om442a; accessories: 15 meter 250mm pipes ; GROSS WEIGHT [KG]: 16000; ENGINE: MERCEDES OM442A; ACCESSORIES: 15 METER 250MM PIPES
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-in technically and visually good condition.

the primus-series is the smallest conventional precision lathe, builds the hamlet for decades.
this machine has decades long proven in the single parts and small series production, in craft & industry, education, training, tool and fixture construction. all feeds, longitudinal & transverse including the castle nut thread termination function correctly and perfectly, the same applies to heidenhain position display the entire controls of the machine including the bed plan - and upper carriage, tailstock and the digital.

the bed are over the entire working surface in very good condition (see pictures). all spindles of the machine have little game are smooth-running in all directions (+-) adjustable by hand. the machine, a quick change toolpost multifix is type a (incl. 3 x steel holder) as well as a rã¶hm three-jaw chuck ã? 125 mm mounted.

this machine is in good allgemeinzustand.an of this site we want to withhold but also, the machine base has received a new paint job guess by the former owner, all from quite some time ago. this lathe comes from a private estate.
this used lathe provides you with a cost-effective alternative to a new machine that is ready for use.

technical details:

workspace:

tip height: 120 mm
top width: 430 mm
umlaufdurschmesser the bed: 245mm
belt levels drive
spindle speeds 16; by 150-3200 u/min
tailstock:

quill stroke: 80mm
taper: mk2
accessories:

digital position indicator / heidenhain vrz 710
three-jaw chuck / rã¶hm ã? 125 mm with indoor & outdoor baking set
muli fix quick change toolpost size a incl. 3 removable steel holders
chuck ã? 0-16mm
revolving lathe
bed stops
turning tool setter
control key
connection, mass & weight:

connection: 1,3kw / 380 volt with cee plug
dimensions: l 1160mm x w 650mm x h 1230mm
weight approx. 360 kg.
a tour / presentation can be pleased by appointment.

gladly we also supply, additional transport costs are created here however, depending on the location, we therefore ask for prior consultation.
  IN TECHNICALLY AND VISUALLY GOOD CONDITION. THE PRIMUS-SERIES IS THE SMALLEST CONVENTIONAL PRECISION LATHE, BUILDS THE HAMLET FOR DECADES. THIS MACHINE HAS DECADES LONG PROVEN IN THE SINGLE PARTS AND SMALL SERIES PRODUCTION, IN CRAFT & INDUSTRY, EDUCATION, TRAINING, TOOL AND FIXTURE CONSTRUCTION. ALL FEEDS, LONGITUDINAL & TRANSVERSE INCLUDING THE CASTLE NUT THREAD TERMINATION FUNCTION CORRECTLY AND PERFECTLY, THE SAME APPLIES TO HEIDENHAIN POSITION DISPLAY THE ENTIRE CONTROLS OF THE MACHINE INCLUDING THE BED PLAN - AND UPPER CARRIAGE, TAILSTOCK AND THE DIGITAL. THE BED ARE OVER THE ENTIRE WORKING SURFACE IN VERY GOOD CONDITION (SEE PICTURES). ALL SPINDLES OF THE MACHINE HAVE LITTLE GAME ARE SMOOTH-RUNNING IN ALL DIRECTIONS (+-) ADJUSTABLE BY HAND. THE MACHINE, A QUICK CHANGE TOOLPOST MULTIFIX IS TYPE A (INCL. 3 X STEEL HOLDER) AS WELL AS A R&ATILDE;&PARA;HM THREE-JAW CHUCK &ATILDE;? 125 MM MOUNTED. THIS MACHINE IS IN GOOD ALLGEMEINZUSTAND.AN OF THIS SITE WE WANT TO WITHHOLD BUT ALSO, THE MACHINE BASE HAS RECEIVED A NEW PAINT JOB GUESS BY THE FORMER OWNER, ALL FROM QUITE SOME TIME AGO. THIS LATHE COMES FROM A PRIVATE ESTATE. THIS USED LATHE PROVIDES YOU WITH A COST-EFFECTIVE ALTERNATIVE TO A NEW MACHINE THAT IS READY FOR USE. TECHNICAL DETAILS: WORKSPACE: TIP HEIGHT: 120 MM TOP WIDTH: 430 MM UMLAUFDURSCHMESSER THE BED: 245MM BELT LEVELS DRIVE SPINDLE SPEEDS 16; BY 150-3200 U/MIN TAILSTOCK: QUILL STROKE: 80MM TAPER: MK2 ACCESSORIES: DIGITAL POSITION INDICATOR / HEIDENHAIN VRZ 710 THREE-JAW CHUCK / R&ATILDE;&PARA;HM &ATILDE;? 125 MM WITH INDOOR & OUTDOOR BAKING SET MULI FIX QUICK CHANGE TOOLPOST SIZE A INCL. 3 REMOVABLE STEEL HOLDERS CHUCK &ATILDE;? 0-16MM REVOLVING LATHE BED STOPS TURNING TOOL SETTER CONTROL KEY CONNECTION, MASS & WEIGHT: CONNECTION: 1,3KW / 380 VOLT WITH CEE PLUG DIMENSIONS: L 1160MM X W 650MM X H 1230MM WEIGHT APPROX. 360 KG. A TOUR / PRESENTATION CAN BE PLEASED BY APPOINTMENT. GLADLY WE ALSO SUPPLY, ADDITIONAL TRANSPORT COSTS ARE CREATED HERE HOWEVER, DEPENDING ON THE LOCATION, WE THEREFORE ASK FOR PRIOR CONSULTATION.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 9.400 €
Ubicación: Land-; gross weight [kg]: 5510; maximum lift capacity [kg]: 500 ; GROSS WEIGHT [KG]: 5510; MAXIMUM LIFT CAPACITY [KG]: 500
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more M types: