21 ofertas

Año de construcción: usado
Ubicación: Land-sheet width: 2050 mm<br/>weight of the machine ca.: 1530 kg<br/>plate thickness: 4,5 mm<br/>dimensions of the machine ca.: 3240 x 900 x 1.200 mm<br/>working length: 210 mm<br/>pre-bending: 5.0 mm<br/>maximum thickness: 6.0 mm<br/>roll-Ø: 170 mm<br/>min. bending Ø: 25 mm<br/>engine power: 4,0 + 1,5 kw<br/>dimensions (lxwxh): 3800 x 110 x 110 mm<br/>weight: 2300 kg<br/><br/>additional information<br/><br/>incl. induction-hardened rolls<br/>incl. backroll with motor<br/><br/>- asymmetrical 3-rolls system<br/><br/>- stable cast iron construction<br/><br/>- induction-hardened rolls, also for the treatment of va steel suitable<br/><br/>- upper roller swillable out incl. eccentric cam fastener<br/><br/>- wire grooves at the end of the rolls<br/><br/>- by handwheel adjustable lower roll<br/><br/>- incl. conical bending device<br/><br/>- control console incl. foot pedal<br/><br/>- emergeny-stop-rope<br/><br/><br/><br/>optional:<br/><br/>- digital readout<br/>- motorised under roll adjustment<br/>- extendet rolls for profil roll<br/><br/><br/><br/><br/> SHEET WIDTH: 2050 MM
WEIGHT OF THE MACHINE CA.: 1530 KG
PLATE THICKNESS: 4,5 MM
DIMENSIONS OF THE MACHINE CA.: 3240 X 900 X 1.200 MM
WORKING LENGTH: 210 MM
PRE-BENDING: 5.0 MM
MAXIMUM THICKNESS: 6.0 MM
ROLL-Ø: 170 MM
MIN. BENDING Ø: 25 MM
ENGINE POWER: 4,0 + 1,5 KW
DIMENSIONS (LXWXH): 3800 X 110 X 110 MM
WEIGHT: 2300 KG

ADDITIONAL INFORMATION

INCL. INDUCTION-HARDENED ROLLS
INCL. BACKROLL WITH MOTOR

- ASYMMETRICAL 3-ROLLS SYSTEM

- STABLE CAST IRON CONSTRUCTION

- INDUCTION-HARDENED ROLLS, ALSO FOR THE TREATMENT OF VA STEEL SUITABLE

- UPPER ROLLER SWILLABLE OUT INCL. ECCENTRIC CAM FASTENER

- WIRE GROOVES AT THE END OF THE ROLLS

- BY HANDWHEEL ADJUSTABLE LOWER ROLL

- INCL. CONICAL BENDING DEVICE

- CONTROL CONSOLE INCL. FOOT PEDAL

- EMERGENY-STOP-ROPE



OPTIONAL:

- DIGITAL READOUT
- MOTORISED UNDER ROLL ADJUSTMENT
- EXTENDET ROLLS FOR PROFIL ROLL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-bending speed: 2,1 m/min<br/>roll diameter: 137 / 132 / 132 mm<br/>: 35 / 30 / 30 mm<br/>ce-certificate:  <br/>bending capacity - angular iron: 40 x 5, Ø 400-500 mm<br/>bending capacity - flat iron: 60 x 10, Ø 500 mm<br/>: 60 x 2, Ø 900 mm<br/>total power requirement: 0,75 kw<br/>weight of the machine ca.: 200 kg<br/>dimensions of the machine ca.: 850 x 730 x 1500 mm<br/>foot pedal with emergency stop button<br/>two driven lower rolls<br/>upper pressure roll mechanically adjustable<br/>horizontal and vertical operation<br/>shafts are made of special steel<br/>movable control unit<br/>adjustable guide carriages with exchangeable slide rails<br/><br/><br/><br/><br/> BENDING SPEED: 2,1 M/MIN
ROLL DIAMETER: 137 / 132 / 132 MM
: 35 / 30 / 30 MM
CE-CERTIFICATE:
BENDING CAPACITY - ANGULAR IRON: 40 X 5, Ø 400-500 MM
BENDING CAPACITY - FLAT IRON: 60 X 10, Ø 500 MM
: 60 X 2, Ø 900 MM
TOTAL POWER REQUIREMENT: 0,75 KW
WEIGHT OF THE MACHINE CA.: 200 KG
DIMENSIONS OF THE MACHINE CA.: 850 X 730 X 1500 MM
FOOT PEDAL WITH EMERGENCY STOP BUTTON
TWO DRIVEN LOWER ROLLS
UPPER PRESSURE ROLL MECHANICALLY ADJUSTABLE
HORIZONTAL AND VERTICAL OPERATION
SHAFTS ARE MADE OF SPECIAL STEEL
MOVABLE CONTROL UNIT
ADJUSTABLE GUIDE CARRIAGES WITH EXCHANGEABLE SLIDE RAILS




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-power capacity: 1,1 kw<br/>shaft diameter: 40 mm<br/>roll diameter: 140 mm<br/>bending speed: 2.500 mm/min<br/>drive power: 1.1 kw<br/>shaft diameter: 40 mm<br/>roll diameter: 140 mm<br/>bending speed 2.5 m / min<br/>dimensions: (wxlxh) 1.200 x 950 x 1.450 mm<br/>weight: approx. 400 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 1,1 KW
SHAFT DIAMETER: 40 MM
ROLL DIAMETER: 140 MM
BENDING SPEED: 2.500 MM/MIN
DRIVE POWER: 1.1 KW
SHAFT DIAMETER: 40 MM
ROLL DIAMETER: 140 MM
BENDING SPEED 2.5 M / MIN
DIMENSIONS: (WXLXH) 1.200 X 950 X 1.450 MM
WEIGHT: APPROX. 400 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 5,5 kw<br/>shaft diameter: 80 mm<br/>roll diameter: 245 mm<br/>bending speed: 4.200 mm/min<br/>drive power: 5.5 kw<br/>shaft diameter: 80 mm<br/>roll diameter: 245 mm<br/>bending speed 4.2 m / min<br/>dimensions: (wxlxh) 1.350 x 1.600 x 1.850 mm<br/>weight: approx. 1.600 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 5,5 KW
SHAFT DIAMETER: 80 MM
ROLL DIAMETER: 245 MM
BENDING SPEED: 4.200 MM/MIN
DRIVE POWER: 5.5 KW
SHAFT DIAMETER: 80 MM
ROLL DIAMETER: 245 MM
BENDING SPEED 4.2 M / MIN
DIMENSIONS: (WXLXH) 1.350 X 1.600 X 1.850 MM
WEIGHT: APPROX. 1.600 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 1,5 + 0,75 kw<br/>shaft diameter: 50 / 40 mm<br/>roll diameter: 152 / 162 mm<br/>bending speed: 3.300 mm/min<br/>drive power: 1.5 + 0.75 kw<br/>shaft diameter: 50 / 40 mm<br/>roll diameter: 152 / 162 mm<br/>bending speed 3.3 m / min<br/>dimensions: (wxlxh) 1.000 x 950 x 1.450 mm<br/>weight: approx. 500 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 1,5 + 0,75 KW
SHAFT DIAMETER: 50 / 40 MM
ROLL DIAMETER: 152 / 162 MM
BENDING SPEED: 3.300 MM/MIN
DRIVE POWER: 1.5 + 0.75 KW
SHAFT DIAMETER: 50 / 40 MM
ROLL DIAMETER: 152 / 162 MM
BENDING SPEED 3.3 M / MIN
DIMENSIONS: (WXLXH) 1.000 X 950 X 1.450 MM
WEIGHT: APPROX. 500 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 1,5 kw<br/>shaft diameter: 50 mm<br/>roll diameter: 155 mm<br/>bending speed: 4.300 mm/min<br/>drive power: 1.5 kw<br/>shaft diameter: 50 mm<br/>roll diameter: 155 mm<br/>bending speed 4.3 m / min<br/>dimensions: (wxlxh) 900 x 1.050 x 1.400 mm<br/>weight: approx. 400 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 1,5 KW
SHAFT DIAMETER: 50 MM
ROLL DIAMETER: 155 MM
BENDING SPEED: 4.300 MM/MIN
DRIVE POWER: 1.5 KW
SHAFT DIAMETER: 50 MM
ROLL DIAMETER: 155 MM
BENDING SPEED 4.3 M / MIN
DIMENSIONS: (WXLXH) 900 X 1.050 X 1.400 MM
WEIGHT: APPROX. 400 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 0,75 kw<br/>shaft diameter: 35 / 30 mm<br/>roll diameter: 137 / 132 mm<br/>bending speed: 2.100 mm/min<br/>drive power: 0.75 kw<br/>shaft diameter: 35 mm / 30 mm<br/>roll diameter: 137/132 mm<br/>bending speed 2.1 m / min<br/>dimensions: (wxlxh) 850 x 730 x 1500 mm<br/>weight: approx. 200 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 0,75 KW
SHAFT DIAMETER: 35 / 30 MM
ROLL DIAMETER: 137 / 132 MM
BENDING SPEED: 2.100 MM/MIN
DRIVE POWER: 0.75 KW
SHAFT DIAMETER: 35 MM / 30 MM
ROLL DIAMETER: 137/132 MM
BENDING SPEED 2.1 M / MIN
DIMENSIONS: (WXLXH) 850 X 730 X 1500 MM
WEIGHT: APPROX. 200 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-sheet width: 1.550 mm<br/>plate thickness: 4,5 mm<br/>weight of the machine ca.: 1.360 kg<br/>dimensions of the machine ca.: 2.320 x 850 x 1.200 mm<br/>working length: 1550 mm<br/>pre-bending: 4.0 mm<br/>maximum thickness: 4.5 mm<br/>roll-Ø: 130 mm<br/>min. bending Ø: 190 mm<br/>engine power: 2.2 kw<br/>dimensions (lxwxh): 2320 x 850 x 1200 mm<br/>weight: 1360 kg<br/><br/>additional information<br/><br/>incl. induction-hardened rolls<br/><br/><br/>- asymmetrical 3-rolls system<br/><br/>- stable cast iron construction<br/><br/>- induction-hardened rolls, also for the treatment of va steel suitable<br/><br/>- upper roller swillable out incl. eccentric cam fastener<br/><br/>- wire grooves at the end of the rolls<br/><br/>- by handwheel adjustable lower roll<br/><br/>- incl. conical bending device<br/><br/>- control console incl. foot pedal<br/><br/>- emergeny-stop-rope<br/><br/><br/><br/>optional:<br/><br/>- digital readout<br/>- motorised back roll adjustment<br/><br/><br/><br/><br/> SHEET WIDTH: 1.550 MM
PLATE THICKNESS: 4,5 MM
WEIGHT OF THE MACHINE CA.: 1.360 KG
DIMENSIONS OF THE MACHINE CA.: 2.320 X 850 X 1.200 MM
WORKING LENGTH: 1550 MM
PRE-BENDING: 4.0 MM
MAXIMUM THICKNESS: 4.5 MM
ROLL-Ø: 130 MM
MIN. BENDING Ø: 190 MM
ENGINE POWER: 2.2 KW
DIMENSIONS (LXWXH): 2320 X 850 X 1200 MM
WEIGHT: 1360 KG

ADDITIONAL INFORMATION

INCL. INDUCTION-HARDENED ROLLS


- ASYMMETRICAL 3-ROLLS SYSTEM

- STABLE CAST IRON CONSTRUCTION

- INDUCTION-HARDENED ROLLS, ALSO FOR THE TREATMENT OF VA STEEL SUITABLE

- UPPER ROLLER SWILLABLE OUT INCL. ECCENTRIC CAM FASTENER

- WIRE GROOVES AT THE END OF THE ROLLS

- BY HANDWHEEL ADJUSTABLE LOWER ROLL

- INCL. CONICAL BENDING DEVICE

- CONTROL CONSOLE INCL. FOOT PEDAL

- EMERGENY-STOP-ROPE



OPTIONAL:

- DIGITAL READOUT
- MOTORISED BACK ROLL ADJUSTMENT




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-plate thickness: 0,8 mm<br/>shank diameter: 29 mm<br/>weight of the machine ca.: 135 kg<br/>sheet thickness: 1.25 mm<br/>roller shaft color: 62 mm<br/>roller center distance: 250 mm<br/>engine: 0.7 kw<br/>shaft-Ø: 26<br/>speed: 6.3 m / min<br/>swing: 260 mm<br/><br/>dimensions of the machine:<br/>length: 1020 mm<br/>height: 1500 mm<br/>width: 600 mm<br/><br/>weight: about 170 kg<br/><br/>incl. standard rolls<br/><br/><br/><br/><br/> PLATE THICKNESS: 0,8 MM
SHANK DIAMETER: 29 MM
WEIGHT OF THE MACHINE CA.: 135 KG
SHEET THICKNESS: 1.25 MM
ROLLER SHAFT COLOR: 62 MM
ROLLER CENTER DISTANCE: 250 MM
ENGINE: 0.7 KW
SHAFT-Ø: 26
SPEED: 6.3 M / MIN
SWING: 260 MM

DIMENSIONS OF THE MACHINE:
LENGTH: 1020 MM
HEIGHT: 1500 MM
WIDTH: 600 MM

WEIGHT: ABOUT 170 KG

INCL. STANDARD ROLLS




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-plate thickness: 1,25 mm<br/>total power requirement: 0,7 kw<br/>weight of the machine ca.: 170 kg<br/>sheet thickness: 1.25 mm<br/>roller shaft color: 62 mm<br/>roller center distance: 250 mm<br/>engine: 0.7 kw<br/>shaft-Ø: 26<br/>speed: 6.3 m / min<br/>swing: 260 mm<br/><br/>dimensions of the machine:<br/>length: 1020 mm<br/>height: 1500 mm<br/>width: 600 mm<br/><br/>weight: about 170 kg<br/><br/>incl. standard rolls<br/><br/><br/><br/><br/> PLATE THICKNESS: 1,25 MM
TOTAL POWER REQUIREMENT: 0,7 KW
WEIGHT OF THE MACHINE CA.: 170 KG
SHEET THICKNESS: 1.25 MM
ROLLER SHAFT COLOR: 62 MM
ROLLER CENTER DISTANCE: 250 MM
ENGINE: 0.7 KW
SHAFT-Ø: 26
SPEED: 6.3 M / MIN
SWING: 260 MM

DIMENSIONS OF THE MACHINE:
LENGTH: 1020 MM
HEIGHT: 1500 MM
WIDTH: 600 MM

WEIGHT: ABOUT 170 KG

INCL. STANDARD ROLLS




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 15 kw<br/>shaft diameter: 120 mm<br/>roll diameter: 390 mm<br/>bending speed: 4.000 mm/min<br/>drive power: 15 kw<br/>shaft diameter: 120 mm<br/>roll diameter: 390 mm<br/>bending speed 4 m / min<br/>dimensions: (wxlxh) 1.450 x 1.985 x 2.040 mm<br/>weight: approx. 4.720 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/>optional:<br/>- digital readout for guide rolls<br/><br/><br/><br/><br/> POWER CAPACITY: 15 KW
SHAFT DIAMETER: 120 MM
ROLL DIAMETER: 390 MM
BENDING SPEED: 4.000 MM/MIN
DRIVE POWER: 15 KW
SHAFT DIAMETER: 120 MM
ROLL DIAMETER: 390 MM
BENDING SPEED 4 M / MIN
DIMENSIONS: (WXLXH) 1.450 X 1.985 X 2.040 MM
WEIGHT: APPROX. 4.720 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL


OPTIONAL:
- DIGITAL READOUT FOR GUIDE ROLLS




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-table load: 150 kg<br/>weight of the machine ca.: 250 kg<br/>dimensions of the machine ca.: 800 x 700 x 950 mm<br/>exhibit machine<br/><br/>producer: bendmak<br/>type: srp 015<br/>load capacity: 150 kg<br/>load center: 100 mm<br/>eccentricity: 100 mm<br/>rotation of the turntable: 360°<br/>strongest inclination: 90°<br/>input power: 380 v<br/>rotary motor: 0,18 kw<br/>tilt motor: 0,25 kw<br/>speed: 1,4 m/min<br/>slew: 30 sek. <br/>table-Ø: 500 mm <br/>t-slots: 5-72 <br/>height in horizontal rotation: 700 mm<br/><br/>dimensions: height: 950 mm length: 800 mm width: 700 mm<br/>weight: ca. 250 kg <br/>earthing: 300 amp. <br/><br/>additional information: <br/>- adjustable speeds <br/>- control panel with 5 m cable <br/>- digital speed indicator on the control panel for monitoring the rotation <br/>- weld grounding mechanism <br/>- mechanical angle indicator <br/>- engine brake with air cooling<br/><br/><br/><br/><br/> TABLE LOAD: 150 KG
WEIGHT OF THE MACHINE CA.: 250 KG
DIMENSIONS OF THE MACHINE CA.: 800 X 700 X 950 MM
EXHIBIT MACHINE

PRODUCER: BENDMAK
TYPE: SRP 015
LOAD CAPACITY: 150 KG
LOAD CENTER: 100 MM
ECCENTRICITY: 100 MM
ROTATION OF THE TURNTABLE: 360°
STRONGEST INCLINATION: 90°
INPUT POWER: 380 V
ROTARY MOTOR: 0,18 KW
TILT MOTOR: 0,25 KW
SPEED: 1,4 M/MIN
SLEW: 30 SEK.
TABLE-Ø: 500 MM
T-SLOTS: 5-72
HEIGHT IN HORIZONTAL ROTATION: 700 MM

DIMENSIONS: HEIGHT: 950 MM LENGTH: 800 MM WIDTH: 700 MM
WEIGHT: CA. 250 KG
EARTHING: 300 AMP.

ADDITIONAL INFORMATION:
- ADJUSTABLE SPEEDS
- CONTROL PANEL WITH 5 M CABLE
- DIGITAL SPEED INDICATOR ON THE CONTROL PANEL FOR MONITORING THE ROTATION
- WELD GROUNDING MECHANISM
- MECHANICAL ANGLE INDICATOR
- ENGINE BRAKE WITH AIR COOLING




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 11 kw<br/>shaft diameter: 100 mm<br/>roll diameter: 315 mm<br/>bending speed: 5.400 mm/min<br/>drive power: 11 kw<br/>shaft diameter: 100 mm<br/>roll diameter: 315 mm<br/>bending speed 5.4 m / min<br/>dimensions: (wxlxh) 1.500 x 1.650 x 2.100 mm<br/>weight: approx. 2.240 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 11 KW
SHAFT DIAMETER: 100 MM
ROLL DIAMETER: 315 MM
BENDING SPEED: 5.400 MM/MIN
DRIVE POWER: 11 KW
SHAFT DIAMETER: 100 MM
ROLL DIAMETER: 315 MM
BENDING SPEED 5.4 M / MIN
DIMENSIONS: (WXLXH) 1.500 X 1.650 X 2.100 MM
WEIGHT: APPROX. 2.240 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-plate thickness: 1,25 mm<br/>shank diameter: 26 mm<br/>weight of the machine ca.: 50 kg<br/>sheet thickness: 1.25 mm<br/>roller shaft color: 62 mm<br/>roller center distance: 250 mm<br/>shaft-Ø: 26<br/>throat depth: 260 mm<br/><br/>dimensions of the machine:<br/>length: 600 mm<br/>height: 550 mm<br/>width: 350 mm<br/><br/>weight: about 50 kg<br/><br/>incl. standard rolls<br/><br/><br/><br/><br/> PLATE THICKNESS: 1,25 MM
SHANK DIAMETER: 26 MM
WEIGHT OF THE MACHINE CA.: 50 KG
SHEET THICKNESS: 1.25 MM
ROLLER SHAFT COLOR: 62 MM
ROLLER CENTER DISTANCE: 250 MM
SHAFT-Ø: 26
THROAT DEPTH: 260 MM

DIMENSIONS OF THE MACHINE:
LENGTH: 600 MM
HEIGHT: 550 MM
WIDTH: 350 MM

WEIGHT: ABOUT 50 KG

INCL. STANDARD ROLLS




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-plate thickness: 2,5 mm<br/>total power requirement: 1,5 + 0,55 kw<br/>weight of the machine ca.: 320 kg<br/>sheet thickness: 2.5 mm<br/>roll spacing: 92 mm<br/>shank distance: 260 mm<br/>outreach: 500 mm<br/>engine: 1.5 + 0.55 kw<br/>shaft diameter: 35 mm<br/>speed: 3.5 m / dk<br/>length: 1200 mm<br/>height: 1200 mm<br/>width: 700 mm<br/>weight: 320 kg<br/><br/>including standard rollers<br/><br/><br/><br/><br/> PLATE THICKNESS: 2,5 MM
TOTAL POWER REQUIREMENT: 1,5 + 0,55 KW
WEIGHT OF THE MACHINE CA.: 320 KG
SHEET THICKNESS: 2.5 MM
ROLL SPACING: 92 MM
SHANK DISTANCE: 260 MM
OUTREACH: 500 MM
ENGINE: 1.5 + 0.55 KW
SHAFT DIAMETER: 35 MM
SPEED: 3.5 M / DK
LENGTH: 1200 MM
HEIGHT: 1200 MM
WIDTH: 700 MM
WEIGHT: 320 KG

INCLUDING STANDARD ROLLERS




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-plate thickness: 4,0 mm<br/>total power requirement: 2,2 + 0,55 kw<br/>weight of the machine ca.: 450 kg<br/>sheet thickness: 4.0 mm<br/>roll spacing: 132 mm<br/>shank distance: 260 mm<br/>outreach: 500 mm<br/>engine: 2.2 + 0.55 kw<br/>shaft diameter: 40 mm<br/>speed: 5 m / dk<br/>length: 1800 mm<br/>height: 1600 mm<br/>width: 700 mm<br/>weight: 450 kg<br/><br/>including standard rollers<br/><br/><br/><br/><br/> PLATE THICKNESS: 4,0 MM
TOTAL POWER REQUIREMENT: 2,2 + 0,55 KW
WEIGHT OF THE MACHINE CA.: 450 KG
SHEET THICKNESS: 4.0 MM
ROLL SPACING: 132 MM
SHANK DISTANCE: 260 MM
OUTREACH: 500 MM
ENGINE: 2.2 + 0.55 KW
SHAFT DIAMETER: 40 MM
SPEED: 5 M / DK
LENGTH: 1800 MM
HEIGHT: 1600 MM
WIDTH: 700 MM
WEIGHT: 450 KG

INCLUDING STANDARD ROLLERS




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-min. center line radius: 12 mm<br/>weight: 300 kg<br/>bending radius min.: 105 mm<br/>producer: bendmak<br/>yom: new<br/>type: btm 64<br/>min. center line radius: 12 mm<br/>min. outside diameter: 6 mm<br/>max. center line radius: 228 mm<br/>weight: 300 kg<br/>dimensions of the machine (lxwxh): 1.190 x 725 x 1.190 mm<br/>min. bending-Ø: 105 mm<br/><br/>additional information: <br/><br/>? incl. pipe bending tools for 60 mm pipes. <br/>? pipe bending up to 180° without stopping the machine <br/>? user-friendly digital display for easy adjustment and fast production <br/><br/>optional tools: <br/><br/>? ingot steel: 32 mm <br/>? pipe: 50 mm <br/>? steel pipe: 63 mm at a thickness of 3,2 mm <br/>? square pipe: 50 mm at a thickness of 3,2 mm <br/>? stainless steel pipe: 38 mm <br/>? stainless steel round pipe: 60 mm at a thickness of 3,2 mm <br/>? chrome round pipe: 50 mm at a thickness of 3,2 mm <br/>? aluminium round pipe: 63 mm at a thickness of 4,0 mm<br/><br/><br/><br/><br/> MIN. CENTER LINE RADIUS: 12 MM
WEIGHT: 300 KG
BENDING RADIUS MIN.: 105 MM
PRODUCER: BENDMAK
YOM: NEW
TYPE: BTM 64
MIN. CENTER LINE RADIUS: 12 MM
MIN. OUTSIDE DIAMETER: 6 MM
MAX. CENTER LINE RADIUS: 228 MM
WEIGHT: 300 KG
DIMENSIONS OF THE MACHINE (LXWXH): 1.190 X 725 X 1.190 MM
MIN. BENDING-Ø: 105 MM

ADDITIONAL INFORMATION:

? INCL. PIPE BENDING TOOLS FOR 60 MM PIPES.
? PIPE BENDING UP TO 180° WITHOUT STOPPING THE MACHINE
? USER-FRIENDLY DIGITAL DISPLAY FOR EASY ADJUSTMENT AND FAST PRODUCTION

OPTIONAL TOOLS:

? INGOT STEEL: 32 MM
? PIPE: 50 MM
? STEEL PIPE: 63 MM AT A THICKNESS OF 3,2 MM
? SQUARE PIPE: 50 MM AT A THICKNESS OF 3,2 MM
? STAINLESS STEEL PIPE: 38 MM
? STAINLESS STEEL ROUND PIPE: 60 MM AT A THICKNESS OF 3,2 MM
? CHROME ROUND PIPE: 50 MM AT A THICKNESS OF 3,2 MM
? ALUMINIUM ROUND PIPE: 63 MM AT A THICKNESS OF 4,0 MM




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-sheet width: 2.050 mm<br/>plate thickness: 4,5 mm<br/>weight of the machine ca.: 1.530 kg<br/>dimensions of the machine ca.: 3.240 x 900 x 1.200 mm<br/>working length: 2050 mm<br/>pre-bending: 4.0 mm<br/>maximum thickness: 4.5 mm<br/>roll-Ø: 140 mm<br/>min. bending Ø: 210 mm<br/>bending speed: 5,7 m/min<br/>engine power: 2.2 kw<br/>dimensions (lxwxh): 3240 x 900 x 1200 mm<br/>weight: 1530 kg<br/><br/>additional information<br/><br/>incl. induction-hardened rolls<br/><br/><br/>- asymmetrical 3-rolls system<br/><br/>- stable cast iron construction<br/><br/>- induction-hardened rolls, also for the treatment of va steel suitable<br/><br/>- upper roller swillable out incl. eccentric cam fastener<br/><br/>- wire grooves at the end of the rolls<br/><br/>- by handwheel adjustable lower roll<br/><br/>- incl. conical bending device<br/><br/>- control console incl. foot pedal<br/><br/>- emergeny-stop-rope<br/><br/><br/><br/>optional:<br/><br/>- digital readout<br/>- motorised back roll adjustment<br/><br/><br/><br/><br/> SHEET WIDTH: 2.050 MM
PLATE THICKNESS: 4,5 MM
WEIGHT OF THE MACHINE CA.: 1.530 KG
DIMENSIONS OF THE MACHINE CA.: 3.240 X 900 X 1.200 MM
WORKING LENGTH: 2050 MM
PRE-BENDING: 4.0 MM
MAXIMUM THICKNESS: 4.5 MM
ROLL-Ø: 140 MM
MIN. BENDING Ø: 210 MM
BENDING SPEED: 5,7 M/MIN
ENGINE POWER: 2.2 KW
DIMENSIONS (LXWXH): 3240 X 900 X 1200 MM
WEIGHT: 1530 KG

ADDITIONAL INFORMATION

INCL. INDUCTION-HARDENED ROLLS


- ASYMMETRICAL 3-ROLLS SYSTEM

- STABLE CAST IRON CONSTRUCTION

- INDUCTION-HARDENED ROLLS, ALSO FOR THE TREATMENT OF VA STEEL SUITABLE

- UPPER ROLLER SWILLABLE OUT INCL. ECCENTRIC CAM FASTENER

- WIRE GROOVES AT THE END OF THE ROLLS

- BY HANDWHEEL ADJUSTABLE LOWER ROLL

- INCL. CONICAL BENDING DEVICE

- CONTROL CONSOLE INCL. FOOT PEDAL

- EMERGENY-STOP-ROPE



OPTIONAL:

- DIGITAL READOUT
- MOTORISED BACK ROLL ADJUSTMENT




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-sheet width: 1.250 mm<br/>plate thickness: 3 mm<br/>weight of the machine ca.: 570 kg<br/>dimensions of the machine ca.: 1.950 x 1.130 x 900 mm<br/>working length: 1250 mm<br/>pre-bending: 2,5 mm<br/>max. thickness: 3 mm<br/>roll-Ø: 90 mm<br/>min. bending-Ø: 130 mm<br/>motor power: 1,1 kw<br/>dimensions (lxwxh ): 1950 x 1130 x 900 mm<br/>weight: 570 kg<br/><br/><br/>additional informations<br/><br/>incl. induction-hardened rolls<br/><br/><br/>- asymmetrical 3-rolls system<br/><br/>- stable cast iron construction<br/><br/>- induction-hardened rolls, also for the treatment of va steel suitable<br/><br/>- upper roller swillable out incl. eccentric cam fastener<br/><br/>- wire grooves at the end of the rolls<br/><br/>- by handwheel adjustable lower and backrolls<br/><br/>- incl. conical-bending device<br/><br/>- foot pedal <br/><br/>- emergency-stop<br/><br/><br/><br/><br/> SHEET WIDTH: 1.250 MM
PLATE THICKNESS: 3 MM
WEIGHT OF THE MACHINE CA.: 570 KG
DIMENSIONS OF THE MACHINE CA.: 1.950 X 1.130 X 900 MM
WORKING LENGTH: 1250 MM
PRE-BENDING: 2,5 MM
MAX. THICKNESS: 3 MM
ROLL-Ø: 90 MM
MIN. BENDING-Ø: 130 MM
MOTOR POWER: 1,1 KW
DIMENSIONS (LXWXH ): 1950 X 1130 X 900 MM
WEIGHT: 570 KG


ADDITIONAL INFORMATIONS

INCL. INDUCTION-HARDENED ROLLS


- ASYMMETRICAL 3-ROLLS SYSTEM

- STABLE CAST IRON CONSTRUCTION

- INDUCTION-HARDENED ROLLS, ALSO FOR THE TREATMENT OF VA STEEL SUITABLE

- UPPER ROLLER SWILLABLE OUT INCL. ECCENTRIC CAM FASTENER

- WIRE GROOVES AT THE END OF THE ROLLS

- BY HANDWHEEL ADJUSTABLE LOWER AND BACKROLLS

- INCL. CONICAL-BENDING DEVICE

- FOOT PEDAL

- EMERGENCY-STOP




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 1,1 kw<br/>shaft diameter: 50 mm<br/>roll diameter: 157 mm<br/>bending speed: 2.950 mm/min<br/>drive power: 1.1 kw<br/>shaft diameter: 50 mm<br/>roll diameter: 157 mm<br/>bending speed 2.95 m / min<br/>dimensions: (wxlxh) 1.50 x 950 x 1.450 mm<br/>weight: approx. 500 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 1,1 KW
SHAFT DIAMETER: 50 MM
ROLL DIAMETER: 157 MM
BENDING SPEED: 2.950 MM/MIN
DRIVE POWER: 1.1 KW
SHAFT DIAMETER: 50 MM
ROLL DIAMETER: 157 MM
BENDING SPEED 2.95 M / MIN
DIMENSIONS: (WXLXH) 1.50 X 950 X 1.450 MM
WEIGHT: APPROX. 500 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-power capacity: 4 kw<br/>shaft diameter: 60 mm<br/>roll diameter: 177 mm<br/>bending speed: 6.400 mm/min<br/>drive power: 4.0 kw<br/>shaft diameter: 60 mm<br/>roll diameter: 177 mm<br/>bending speed 6.4 m / min<br/>dimensions: (wxlxh) 1.400 x 1.150 x 1.530 mm<br/>weight: approx. 1.080 kg<br/><br/>table (see photo):<br/>a: standard rollers<br/>b: optional special rollers<br/><br/><br/>further information:<br/><br/>- two driven bottom rollers, the upper pressure roller is based on a scale<br/>mechanically adjustable.<br/>- the special steel shafts are ground and hardened<br/>- both horizontal and vertical working is done by a<br/>folding mechanism allows.<br/>- it is suitable for bending sheets, rings and spirals. in addition, almost<br/>all profiles and radii.<br/>- it can be operated by the movable control unit with<br/>foot switch and emergency stop.<br/>- the adjustable guide carriages have interchangeable slide rails.<br/>- electrical equipment from schneider<br/>- made in europe<br/><br/>scope of delivery:<br/><br/>- standard rolling set a<br/>- side leadership roles<br/>- foot pedal with emergency stop button<br/>- operating manual<br/><br/><br/><br/><br/> POWER CAPACITY: 4 KW
SHAFT DIAMETER: 60 MM
ROLL DIAMETER: 177 MM
BENDING SPEED: 6.400 MM/MIN
DRIVE POWER: 4.0 KW
SHAFT DIAMETER: 60 MM
ROLL DIAMETER: 177 MM
BENDING SPEED 6.4 M / MIN
DIMENSIONS: (WXLXH) 1.400 X 1.150 X 1.530 MM
WEIGHT: APPROX. 1.080 KG

TABLE (SEE PHOTO):
A: STANDARD ROLLERS
B: OPTIONAL SPECIAL ROLLERS


FURTHER INFORMATION:

- TWO DRIVEN BOTTOM ROLLERS, THE UPPER PRESSURE ROLLER IS BASED ON A SCALE
MECHANICALLY ADJUSTABLE.
- THE SPECIAL STEEL SHAFTS ARE GROUND AND HARDENED
- BOTH HORIZONTAL AND VERTICAL WORKING IS DONE BY A
FOLDING MECHANISM ALLOWS.
- IT IS SUITABLE FOR BENDING SHEETS, RINGS AND SPIRALS. IN ADDITION, ALMOST
ALL PROFILES AND RADII.
- IT CAN BE OPERATED BY THE MOVABLE CONTROL UNIT WITH
FOOT SWITCH AND EMERGENCY STOP.
- THE ADJUSTABLE GUIDE CARRIAGES HAVE INTERCHANGEABLE SLIDE RAILS.
- ELECTRICAL EQUIPMENT FROM SCHNEIDER
- MADE IN EUROPE

SCOPE OF DELIVERY:

- STANDARD ROLLING SET A
- SIDE LEADERSHIP ROLES
- FOOT PEDAL WITH EMERGENCY STOP BUTTON
- OPERATING MANUAL




Vendedor: SKM Industriemaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BENDMAK types: