22583 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-
perfecta circut f from 2004 (4 side cut!) 
 kallfass with kallfass delivery with 600 a trimmer line of size 30 x 44 cm
 option; conveyor tray to trimmer, control panel, size mini. 8 x 10 cm
 max 30 x 44 cm cutting height 9 cm, kallfass wrapmat 600 and standard 600 of 1983, can either cut with 3 x. side or 4 x. side

condition; in very good condition, available immediately
 can be lakes in our factory PERFECTA CIRCUT F FROM 2004 (4 SIDE CUT!) KALLFASS WITH KALLFASS DELIVERY WITH 600 A TRIMMER LINE OF SIZE 30 X 44 CM OPTION; CONVEYOR TRAY TO TRIMMER, CONTROL PANEL, SIZE MINI. 8 X 10 CM MAX 30 X 44 CM CUTTING HEIGHT 9 CM, KALLFASS WRAPMAT 600 AND STANDARD 600 OF 1983, CAN EITHER CUT WITH 3 X. SIDE OR 4 X. SIDE CONDITION; IN VERY GOOD CONDITION, AVAILABLE IMMEDIATELY CAN BE LAKES IN OUR FACTORY
Vendedor: IMPRIMERIE UNAL
Año de construcción: usado
Precio: 14.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-vacuum degreaser (japan,2008)

make:japan hayes(ihi)

manufacturing year: 2008

model:hwbv-3v

electric supply: ac 200v, 75kw,60hz, 3phase

type: immersion type

(specification)

effective work area: 650h x660w x1220l

treatment weight:650kg

processing time(cycling time):20~30min

cleaning method: vapor/impression

immersion liquid recycling:200l/hour

solvent recycling in vapor: 30l/hour

solvent volume:1950l

electric supply:75kw

coding water:100l~/min

compressed air:0.5~mpa(g)

vacuum pumping speed:5000l/min

machine size: 4200mm(w) x5400mm(l) x3800mm(h)

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea
 VACUUM DEGREASER (JAPAN,2008) MAKE:JAPAN HAYES(IHI) MANUFACTURING YEAR: 2008 MODEL:HWBV-3V ELECTRIC SUPPLY: AC 200V, 75KW,60HZ, 3PHASE TYPE: IMMERSION TYPE (SPECIFICATION) EFFECTIVE WORK AREA: 650H X660W X1220L TREATMENT WEIGHT:650KG PROCESSING TIME(CYCLING TIME):20~30MIN CLEANING METHOD: VAPOR/IMPRESSION IMMERSION LIQUID RECYCLING:200L/HOUR SOLVENT RECYCLING IN VAPOR: 30L/HOUR SOLVENT VOLUME:1950L ELECTRIC SUPPLY:75KW CODING WATER:100L~/MIN COMPRESSED AIR:0.5~MPA(G) VACUUM PUMPING SPEED:5000L/MIN MACHINE SIZE: 4200MM(W) X5400MM(L) X3800MM(H) BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 31.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-vacuum degreaser (japan,2008)

make:japan hayes(ihi)

manufacturing year: 2008

model:hwbv-3v

electric supply: ac 200v, 75kw,60hz, 3phase

type: immersion type

(specification)

effective work area: 650h x660w x1220l

treatment weight:650kg

processing time(cycling time):20~30min

cleaning method: vapor/impression

immersion liquid recycling:200l/hour

solvent recycling in vapor: 30l/hour

solvent volume:1950l

electric supply:75kw

coding water:100l~/min

compressed air:0.5~mpa(g)

vacuum pumping speed:5000l/min

machine size: 4200mm(w) x5400mm(l) x3800mm(h)

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea

 VACUUM DEGREASER (JAPAN,2008) MAKE:JAPAN HAYES(IHI) MANUFACTURING YEAR: 2008 MODEL:HWBV-3V ELECTRIC SUPPLY: AC 200V, 75KW,60HZ, 3PHASE TYPE: IMMERSION TYPE (SPECIFICATION) EFFECTIVE WORK AREA: 650H X660W X1220L TREATMENT WEIGHT:650KG PROCESSING TIME(CYCLING TIME):20~30MIN CLEANING METHOD: VAPOR/IMPRESSION IMMERSION LIQUID RECYCLING:200L/HOUR SOLVENT RECYCLING IN VAPOR: 30L/HOUR SOLVENT VOLUME:1950L ELECTRIC SUPPLY:75KW CODING WATER:100L~/MIN COMPRESSED AIR:0.5~MPA(G) VACUUM PUMPING SPEED:5000L/MIN MACHINE SIZE: 4200MM(W) X5400MM(L) X3800MM(H) BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 19.500 EU€
Ubicación: Land-the saw can be cut vertically and horizontally. robust construction of the machine gives the possibility of processing several pieces of wood and wood panels simultaneously or large plates. the saw has a pneumatic sliding mechanism for cutting slabs and a vertical and horizontal cutting support, as well as a slider for easy trimming of horizontal elements. THE SAW CAN BE CUT VERTICALLY AND HORIZONTALLY. ROBUST CONSTRUCTION OF THE MACHINE GIVES THE POSSIBILITY OF PROCESSING SEVERAL PIECES OF WOOD AND WOOD PANELS SIMULTANEOUSLY OR LARGE PLATES. THE SAW HAS A PNEUMATIC SLIDING MECHANISM FOR CUTTING SLABS AND A VERTICAL AND HORIZONTAL CUTTING SUPPORT, AS WELL AS A SLIDER FOR EASY TRIMMING OF HORIZONTAL ELEMENTS.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea


 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 76.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-1380mm x0.2mm aluminium cold/hot rolling mills

make:korean

manufacturing year:1995

production capacity:: 120,000ton/year(hot coil)   

production capacity: 70,000ton/year(cold coil) 

 

1. hot rolling mill

make:poscon(korean) 

year:1995                

main motor: 2,400?(d.c 600?×4set)                   

line speed: 150m/min               

material width(w)3,100?   

rolling pressure: max. 1,200ton                  

product weight: max. 5ton                 

product size: max. 1,380?w×6~10t                    

production capacity:: 120,000ton/y              

type: two-high reversing mill                    

work roll ass'y ×3set                

roll : 1,050×1,500?                  

d.c motor 600?×4set               

speed: 150m/min             

 

2. 1380mm cold rolling mill  

make:poscon(korean) 

year:1995        

main motor: 2,400?(dc 600?×4set)                   

line speed: 0-600m/min                    

materila width:1,380?

materil thickness:6~10mm         

rolling pressure: 1,200ton                  

product weight: max. 5ton                 

product thickness:0.2mm                   

production capacity: 70,000ton/year

agc system: auto thickness gauge controller

sfc system(shape flatness system)



------------------------------------------------------------------

bmj korea co.,ltd.

director: jongduk baek

mobile: +82-10-7499-2567

e-mail: whitebel64@gmail.com

address: 4f, 27-8, gukjegeumyung-ro 8-gil,


yeongdeungpo-gu, seoul, korea

  1380MM X0.2MM ALUMINIUM COLD/HOT ROLLING MILLS MAKE:KOREAN MANUFACTURING YEAR:1995 PRODUCTION CAPACITY:: 120,000TON/YEAR(HOT COIL) PRODUCTION CAPACITY: 70,000TON/YEAR(COLD COIL) 1. HOT ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(D.C 600?×4SET) LINE SPEED: 150M/MIN MATERIAL WIDTH(W)3,100? ROLLING PRESSURE: MAX. 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT SIZE: MAX. 1,380?W×6~10T PRODUCTION CAPACITY:: 120,000TON/Y TYPE: TWO-HIGH REVERSING MILL WORK ROLL ASS'Y ×3SET ROLL : 1,050×1,500? D.C MOTOR 600?×4SET SPEED: 150M/MIN 2. 1380MM COLD ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(DC 600?×4SET) LINE SPEED: 0-600M/MIN MATERILA WIDTH:1,380? MATERIL THICKNESS:6~10MM ROLLING PRESSURE: 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT THICKNESS:0.2MM PRODUCTION CAPACITY: 70,000TON/YEAR AGC SYSTEM: AUTO THICKNESS GAUGE CONTROLLER SFC SYSTEM(SHAPE FLATNESS SYSTEM) ------------------------------------------------------------------ BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-make apl apparatebau gmbh dormagen (de), type beu 457/3400-2, no h-3660, new 2013, heat exchanger, heating surface 48,2 m2, tube material mild steel (p235h), shell material mild steel (p235h), tube capacity 160 ltr, number of tubes: 512, tube diameter 12,3 mm, tube length 3500mm, working pressure tubes 10 bar, test pressure tubes 24,2 bar, max. temperature 340 degr.c, shell capacity 325 ltr, working pressure shell 10 bar, test pressure shell 24,2 bar, max. temperature 340 degr.c, shell connections 2x dia.80mm, cover connections 2x dia.80mm, mounted on frame, floorspace 4,0x0,5 m, weight 1260 kgheat exchangersheat exchangers > heat exchangers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE APL APPARATEBAU GMBH DORMAGEN (DE), TYPE BEU 457/3400-2, NO H-3660, NEW 2013, HEAT EXCHANGER, HEATING SURFACE 48,2 M2, TUBE MATERIAL MILD STEEL (P235H), SHELL MATERIAL MILD STEEL (P235H), TUBE CAPACITY 160 LTR, NUMBER OF TUBES: 512, TUBE DIAMETER 12,3 MM, TUBE LENGTH 3500MM, WORKING PRESSURE TUBES 10 BAR, TEST PRESSURE TUBES 24,2 BAR, MAX. TEMPERATURE 340 DEGR.C, SHELL CAPACITY 325 LTR, WORKING PRESSURE SHELL 10 BAR, TEST PRESSURE SHELL 24,2 BAR, MAX. TEMPERATURE 340 DEGR.C, SHELL CONNECTIONS 2X DIA.80MM, COVER CONNECTIONS 2X DIA.80MM, MOUNTED ON FRAME, FLOORSPACE 4,0X0,5 M, WEIGHT 1260 KGHEAT EXCHANGERSHEAT EXCHANGERS > HEAT EXCHANGERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-1380mm x0.2mm aluminium cold/hot rolling mills

make:korean

manufacturing year:1995

production capacity:: 120,000ton/year(hot coil)   

production capacity: 70,000ton/year(cold coil) 

 

1. hot rolling mill

make:poscon(korean) 

year:1995                

main motor: 2,400?(d.c 600?×4set)                   

line speed: 150m/min               

material width(w)3,100?   

rolling pressure: max. 1,200ton                  

product weight: max. 5ton                 

product size: max. 1,380?w×6~10t                    

production capacity:: 120,000ton/y              

type: two-high reversing mill                    

work roll ass'y ×3set                

roll : 1,050×1,500?                  

d.c motor 600?×4set               

speed: 150m/min             

 

2. 1380mm cold rolling mill  

make:poscon(korean) 

year:1995        

main motor: 2,400?(dc 600?×4set)                   

line speed: 0-600m/min                    

materila width:1,380?

materil thickness:6~10mm         

rolling pressure: 1,200ton                  

product weight: max. 5ton                 

product thickness:0.2mm                   

production capacity: 70,000ton/year

agc system: auto thickness gauge controller

sfc system(shape flatness system)



------------------------------------------------------------------

bmj korea co.,ltd.

director: jongduk baek

mobile: +82-10-7499-2567

e-mail: whitebel64@gmail.com

address: 4f, 27-8, gukjegeumyung-ro 8-gil,


yeongdeungpo-gu, seoul, korea

  1380MM X0.2MM ALUMINIUM COLD/HOT ROLLING MILLS MAKE:KOREAN MANUFACTURING YEAR:1995 PRODUCTION CAPACITY:: 120,000TON/YEAR(HOT COIL) PRODUCTION CAPACITY: 70,000TON/YEAR(COLD COIL) 1. HOT ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(D.C 600?×4SET) LINE SPEED: 150M/MIN MATERIAL WIDTH(W)3,100? ROLLING PRESSURE: MAX. 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT SIZE: MAX. 1,380?W×6~10T PRODUCTION CAPACITY:: 120,000TON/Y TYPE: TWO-HIGH REVERSING MILL WORK ROLL ASS'Y ×3SET ROLL : 1,050×1,500? D.C MOTOR 600?×4SET SPEED: 150M/MIN 2. 1380MM COLD ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(DC 600?×4SET) LINE SPEED: 0-600M/MIN MATERILA WIDTH:1,380? MATERIL THICKNESS:6~10MM ROLLING PRESSURE: 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT THICKNESS:0.2MM PRODUCTION CAPACITY: 70,000TON/YEAR AGC SYSTEM: AUTO THICKNESS GAUGE CONTROLLER SFC SYSTEM(SHAPE FLATNESS SYSTEM) ------------------------------------------------------------------ BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 59.000 €
Ubicación: Land-; power [ps]: 150 ; POWER [PS]: 150
Vendedor: Biringer International GmbH
Año de construcción: usado
Ubicación: Land-steel strap(wrapping band)production plant  
 make: korean 
year:2013~1994 
(steel band product specification) 
-grade: apex grade 
-item: standard or hi-tensile (non heat) 
-finish: blue paint zinc 
-thickness:0.38~1.27mm 
-width:12.7/16/19/25.4/32mm 
-tensile (kg/?) : min 75 (aim. 85)  
: min 90 (aim. 95) 
  -line speed : 80/150mpm     
 -product capa' : 2,000ton/month 
 
(general specification) 
1) coil thickness : 0.4 ~ 1.2mm      
2) coil weight : max. 7ton   
3) coil width : 260 ~ 520mm    
4) strands : max. 16 cutters   
5) line speed  : 80/150mpm     
6) product capa' : 2,000ton/month     
(0.6t x 19mm x 16st x 80mpm x 500hr/month) 
 
(equipment list) 
2-1. slitting parts   
1) coil saddle x 3set     
2) coil car           
3) uncoiler           
4) snubber roller  
5) coil opener         
6) pinch roll & deflector roller  
7) guide table    
8) side guide and shear       
9) slitter stand        
10) scrap baller      
11) dancing roll    
2-2. blue & painting parts 
1) pulley with shaft & bush  
2) spot welder    
--------------------------------------------

bmj korea co.,ltd.

director: jongduk baek

mobile: +82-10-7499-2567

e-mail: whitebel64@gmail.com

address: 4f, 27-8, gukjegeumyung-ro 8-gil,


yeongdeungpo-gu, seoul, korea STEEL STRAP(WRAPPING BAND)PRODUCTION PLANT MAKE: KOREAN YEAR:2013~1994 (STEEL BAND PRODUCT SPECIFICATION) -GRADE: APEX GRADE -ITEM: STANDARD OR HI-TENSILE (NON HEAT) -FINISH: BLUE PAINT ZINC -THICKNESS:0.38~1.27MM -WIDTH:12.7/16/19/25.4/32MM -TENSILE (KG/?) : MIN 75 (AIM. 85) : MIN 90 (AIM. 95) -LINE SPEED : 80/150MPM -PRODUCT CAPA' : 2,000TON/MONTH (GENERAL SPECIFICATION) 1) COIL THICKNESS : 0.4 ~ 1.2MM 2) COIL WEIGHT : MAX. 7TON 3) COIL WIDTH : 260 ~ 520MM 4) STRANDS : MAX. 16 CUTTERS 5) LINE SPEED : 80/150MPM 6) PRODUCT CAPA' : 2,000TON/MONTH (0.6T X 19MM X 16ST X 80MPM X 500HR/MONTH) (EQUIPMENT LIST) 2-1. SLITTING PARTS 1) COIL SADDLE X 3SET 2) COIL CAR 3) UNCOILER 4) SNUBBER ROLLER 5) COIL OPENER 6) PINCH ROLL & DEFLECTOR ROLLER 7) GUIDE TABLE 8) SIDE GUIDE AND SHEAR 9) SLITTER STAND 10) SCRAP BALLER 11) DANCING ROLL 2-2. BLUE & PAINTING PARTS 1) PULLEY WITH SHAFT & BUSH 2) SPOT WELDER -------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-AT Austria, 3800 Göpfritz an der Wild
Vendedor: Biringer International GmbH
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea




 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 425 €
Ubicación: Land-schneider electric nsx 160h, schneider electric nsx 100h, schneider electric nsx 100h, , socket box, fuse box, breaker cabinet SCHNEIDER ELECTRIC NSX 160H, SCHNEIDER ELECTRIC NSX 100H, SCHNEIDER ELECTRIC NSX 100H, , SOCKET BOX, FUSE BOX, BREAKER CABINET
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea




 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 425 €
Ubicación: Land-schneider electric nsx 160h, schneider electric nsx 100h, schneider electric nsx 100h, , socket box, fuse box, breaker cabinet SCHNEIDER ELECTRIC NSX 160H, SCHNEIDER ELECTRIC NSX 100H, SCHNEIDER ELECTRIC NSX 100H, , SOCKET BOX, FUSE BOX, BREAKER CABINET
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea




 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-1250mm cgl(continuous galvanizing line) for cold rolled steel  


make: yodokawa(japanese)

manufacturing year: 1980~2015

 overhaul cost: 20,000,000usd  was spent in 2015


 capacity: 240,000ton/year


 material: full hars cr steel coil


width:7 00-1,250mm 

thickness: 0.2~ 1.2mm 

coil weight: 22ton

coil out diameter: 2,050mm

double-sided plating thickness(g/m2): 60-220

plating type: zero spangle

finishing process: cr-free. chromate

 electric equipment, motor: unicon(u.s.a), year: 2015


plc: siemens, year: 2015

pre treatment equipment was manufactured in 2015.

welder was manufactured in 2015.

skin pass mill was retrofitted by servo controller in 2015. 

-----------------------------------------------
bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea     1250MM CGL(CONTINUOUS GALVANIZING LINE) FOR COLD ROLLED STEEL MAKE: YODOKAWA(JAPANESE) MANUFACTURING YEAR: 1980~2015 OVERHAUL COST: 20,000,000USD WAS SPENT IN 2015 CAPACITY: 240,000TON/YEAR MATERIAL: FULL HARS CR STEEL COIL WIDTH:7 00-1,250MM THICKNESS: 0.2~ 1.2MM COIL WEIGHT: 22TON COIL OUT DIAMETER: 2,050MM DOUBLE-SIDED PLATING THICKNESS(G/M2): 60-220 PLATING TYPE: ZERO SPANGLE FINISHING PROCESS: CR-FREE. CHROMATE ELECTRIC EQUIPMENT, MOTOR: UNICON(U.S.A), YEAR: 2015 PLC: SIEMENS, YEAR: 2015 PRE TREATMENT EQUIPMENT WAS MANUFACTURED IN 2015. WELDER WAS MANUFACTURED IN 2015. SKIN PASS MILL WAS RETROFITTED BY SERVO CONTROLLER IN 2015. ----------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 10.750 €
Ubicación: Land-; gross weight [kg]: 4700; engine: scania dc9 53; accessories: tanker, battery, control panel, stahldach ; GROSS WEIGHT [KG]: 4700; ENGINE: SCANIA DC9 53; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-1250mm cgl(continuous galvanizing line) for cold rolled steel  


make: yodokawa(japanese)

manufacturing year: 1980~2015

 overhaul cost: 20,000,000usd  was spent in 2015


 capacity: 240,000ton/year


 material: full hars cr steel coil


width:7 00-1,250mm 

thickness: 0.2~ 1.2mm 

coil weight: 22ton

coil out diameter: 2,050mm

double-sided plating thickness(g/m2): 60-220

plating type: zero spangle

finishing process: cr-free. chromate

 electric equipment, motor: unicon(u.s.a), year: 2015


plc: siemens, year: 2015

pre treatment equipment was manufactured in 2015.

welder was manufactured in 2015.

skin pass mill was retrofitted by servo controller in 2015. 

-----------------------------------------------
bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea     1250MM CGL(CONTINUOUS GALVANIZING LINE) FOR COLD ROLLED STEEL MAKE: YODOKAWA(JAPANESE) MANUFACTURING YEAR: 1980~2015 OVERHAUL COST: 20,000,000USD WAS SPENT IN 2015 CAPACITY: 240,000TON/YEAR MATERIAL: FULL HARS CR STEEL COIL WIDTH:7 00-1,250MM THICKNESS: 0.2~ 1.2MM COIL WEIGHT: 22TON COIL OUT DIAMETER: 2,050MM DOUBLE-SIDED PLATING THICKNESS(G/M2): 60-220 PLATING TYPE: ZERO SPANGLE FINISHING PROCESS: CR-FREE. CHROMATE ELECTRIC EQUIPMENT, MOTOR: UNICON(U.S.A), YEAR: 2015 PLC: SIEMENS, YEAR: 2015 PRE TREATMENT EQUIPMENT WAS MANUFACTURED IN 2015. WELDER WAS MANUFACTURED IN 2015. SKIN PASS MILL WAS RETROFITTED BY SERVO CONTROLLER IN 2015. ----------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 8.400 €
Ubicación: Land-; gross weight [kg]: 3455; rear tyres remaining: 30; front tyres remaining: 30; maximum lift capacity [kg]: 567 ; GROSS WEIGHT [KG]: 3455; REAR TYRES REMAINING: 30; FRONT TYRES REMAINING: 30; MAXIMUM LIFT CAPACITY [KG]: 567
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-
vacuum heat treatment furnace(ulvac,2007)

make:ulvac

manufacturing year:2007

model:fhb-60c

type:batch type

(power supply)

ac 200v

180kva

3phase, 50hz

purpose: quenching, annealing, tempering, sintering, brazing etc

 for various metal parts ,tools and machine parts.

(features)

maximum heating temperature: 1300ºc.

operational temperature range :400 to 1250?.

temperature uniformity can be guaranteed at 1150ºc with accuracy of ±5ºc.

high heat effciency metal(mo) is adopted.

oil diffusion pump(model pfl-22) is applied

(applications)

tempering, quenching: metals for tools and machine parts.

sintering: ultra hard tools and magnets etc.

brazing: heat exchangers and machine parts.

(specifications)

size of uniform heating zone:  600w x 600h x 1200lmm*1

throughput 500kg

temp.(max. / operation) maximum temperature : 1300ºc

operating temperature : 400ºc?1250ºc

temperature uniformity  1150?with accuracy of ±5ºc*2

no works loaded?

ramp-up rate:     within 120 min. room temperature to 1150?*3

ultimate vacuum:  no more than 3.0 x 10-3pa*4

cooling rate within 45 min. from 1150? to less than 150?*5

evacuation time:   within 25 min. from atmosphere to 1.0×10-1pa

pressure rise :5.3×10-4pa•m-3 / s or less

power consumption:      180kva

cooling water consumption:    14.0m3 / hr

pneumatic air consumption:    600nl / min

cooling gas consumption:      8.8nm3 / batch*5(50hz)

footprint:   approx. 5.5w x 5.9l x 3.5hm 

-----------------------------------------------
bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea    VACUUM HEAT TREATMENT FURNACE(ULVAC,2007) MAKE:ULVAC MANUFACTURING YEAR:2007 MODEL:FHB-60C TYPE:BATCH TYPE (POWER SUPPLY) AC 200V 180KVA 3PHASE, 50HZ PURPOSE: QUENCHING, ANNEALING, TEMPERING, SINTERING, BRAZING ETC FOR VARIOUS METAL PARTS ,TOOLS AND MACHINE PARTS. (FEATURES) MAXIMUM HEATING TEMPERATURE: 1300ºC. OPERATIONAL TEMPERATURE RANGE :400 TO 1250?. TEMPERATURE UNIFORMITY CAN BE GUARANTEED AT 1150ºC WITH ACCURACY OF ±5ºC. HIGH HEAT EFFCIENCY METAL(MO) IS ADOPTED. OIL DIFFUSION PUMP(MODEL PFL-22) IS APPLIED (APPLICATIONS) TEMPERING, QUENCHING: METALS FOR TOOLS AND MACHINE PARTS. SINTERING: ULTRA HARD TOOLS AND MAGNETS ETC. BRAZING: HEAT EXCHANGERS AND MACHINE PARTS. (SPECIFICATIONS) SIZE OF UNIFORM HEATING ZONE: 600W X 600H X 1200LMM*1 THROUGHPUT 500KG TEMP.(MAX. / OPERATION) MAXIMUM TEMPERATURE : 1300ºC OPERATING TEMPERATURE : 400ºC?1250ºC TEMPERATURE UNIFORMITY 1150?WITH ACCURACY OF ±5ºC*2 NO WORKS LOADED? RAMP-UP RATE: WITHIN 120 MIN. ROOM TEMPERATURE TO 1150?*3 ULTIMATE VACUUM: NO MORE THAN 3.0 X 10-3PA*4 COOLING RATE WITHIN 45 MIN. FROM 1150? TO LESS THAN 150?*5 EVACUATION TIME: WITHIN 25 MIN. FROM ATMOSPHERE TO 1.0×10-1PA PRESSURE RISE :5.3×10-4PA•M-3 / S OR LESS POWER CONSUMPTION: 180KVA COOLING WATER CONSUMPTION: 14.0M3 / HR PNEUMATIC AIR CONSUMPTION: 600NL / MIN COOLING GAS CONSUMPTION: 8.8NM3 / BATCH*5(50HZ) FOOTPRINT: APPROX. 5.5W X 5.9L X 3.5HM ----------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-; gross weight [kg]: 6800; rear tyres remaining: 70; front tyres remaining: 70; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6800; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-
vacuum heat treatment furnace(ulvac,2007)

make:ulvac

manufacturing year:2007

model:fhb-60c

type:batch type

(power supply)

ac 200v

180kva

3phase, 50hz

purpose: quenching, annealing, tempering, sintering, brazing etc

 for various metal parts ,tools and machine parts.

(features)

maximum heating temperature: 1300ºc.

operational temperature range :400 to 1250?.

temperature uniformity can be guaranteed at 1150ºc with accuracy of ±5ºc.

high heat effciency metal(mo) is adopted.

oil diffusion pump(model pfl-22) is applied

(applications)

tempering, quenching: metals for tools and machine parts.

sintering: ultra hard tools and magnets etc.

brazing: heat exchangers and machine parts.

(specifications)

size of uniform heating zone:  600w x 600h x 1200lmm*1

throughput 500kg

temp.(max. / operation) maximum temperature : 1300ºc

operating temperature : 400ºc?1250ºc

temperature uniformity  1150?with accuracy of ±5ºc*2

no works loaded?

ramp-up rate:     within 120 min. room temperature to 1150?*3

ultimate vacuum:  no more than 3.0 x 10-3pa*4

cooling rate within 45 min. from 1150? to less than 150?*5

evacuation time:   within 25 min. from atmosphere to 1.0×10-1pa

pressure rise :5.3×10-4pa•m-3 / s or less

power consumption:      180kva

cooling water consumption:    14.0m3 / hr

pneumatic air consumption:    600nl / min

cooling gas consumption:      8.8nm3 / batch*5(50hz)

footprint:   approx. 5.5w x 5.9l x 3.5hm 

-----------------------------------------------
bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea    VACUUM HEAT TREATMENT FURNACE(ULVAC,2007) MAKE:ULVAC MANUFACTURING YEAR:2007 MODEL:FHB-60C TYPE:BATCH TYPE (POWER SUPPLY) AC 200V 180KVA 3PHASE, 50HZ PURPOSE: QUENCHING, ANNEALING, TEMPERING, SINTERING, BRAZING ETC FOR VARIOUS METAL PARTS ,TOOLS AND MACHINE PARTS. (FEATURES) MAXIMUM HEATING TEMPERATURE: 1300ºC. OPERATIONAL TEMPERATURE RANGE :400 TO 1250?. TEMPERATURE UNIFORMITY CAN BE GUARANTEED AT 1150ºC WITH ACCURACY OF ±5ºC. HIGH HEAT EFFCIENCY METAL(MO) IS ADOPTED. OIL DIFFUSION PUMP(MODEL PFL-22) IS APPLIED (APPLICATIONS) TEMPERING, QUENCHING: METALS FOR TOOLS AND MACHINE PARTS. SINTERING: ULTRA HARD TOOLS AND MAGNETS ETC. BRAZING: HEAT EXCHANGERS AND MACHINE PARTS. (SPECIFICATIONS) SIZE OF UNIFORM HEATING ZONE: 600W X 600H X 1200LMM*1 THROUGHPUT 500KG TEMP.(MAX. / OPERATION) MAXIMUM TEMPERATURE : 1300ºC OPERATING TEMPERATURE : 400ºC?1250ºC TEMPERATURE UNIFORMITY 1150?WITH ACCURACY OF ±5ºC*2 NO WORKS LOADED? RAMP-UP RATE: WITHIN 120 MIN. ROOM TEMPERATURE TO 1150?*3 ULTIMATE VACUUM: NO MORE THAN 3.0 X 10-3PA*4 COOLING RATE WITHIN 45 MIN. FROM 1150? TO LESS THAN 150?*5 EVACUATION TIME: WITHIN 25 MIN. FROM ATMOSPHERE TO 1.0×10-1PA PRESSURE RISE :5.3×10-4PA•M-3 / S OR LESS POWER CONSUMPTION: 180KVA COOLING WATER CONSUMPTION: 14.0M3 / HR PNEUMATIC AIR CONSUMPTION: 600NL / MIN COOLING GAS CONSUMPTION: 8.8NM3 / BATCH*5(50HZ) FOOTPRINT: APPROX. 5.5W X 5.9L X 3.5HM ----------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-; gross weight [kg]: 7070; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7070; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-p123 - used approx. 3 m³ / 3,000 litres polyester tank, grp-tank, aboveground, vertically standing, on steel frame, in good condition. 

technical details: 
capacity: approx. 3 m³ / 3,000 litres 
material: polyester / grp 
manufacturer: erka 
dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m 

used storage tank in good condition, standing, hatch on the front side, several in- and outlets. 

the container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. 

price upon request. 

transport can be arranged at low cost. also we can modify the tank to suit your demands, just ask us. 

it is not possible to update all our advertisements daily. since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. please give us a call or write, so that we can advise you personally. 

more information and offers on our site: 
profi-tanks(dot)de P123 - USED APPROX. 3 M³ / 3,000 LITRES POLYESTER TANK, GRP-TANK, ABOVEGROUND, VERTICALLY STANDING, ON STEEL FRAME, IN GOOD CONDITION. TECHNICAL DETAILS: CAPACITY: APPROX. 3 M³ / 3,000 LITRES MATERIAL: POLYESTER / GRP MANUFACTURER: ERKA DIMENSIONS: APPROX. H TOTAL = 2.30 M / W = 1.10 M / L = 1.60 M USED STORAGE TANK IN GOOD CONDITION, STANDING, HATCH ON THE FRONT SIDE, SEVERAL IN- AND OUTLETS. THE CONTAINER CAN BE USED AS A STORAGE TANK FOR MANY DIFFERENT MEDIA SUCH AS WATER, LIQUID FEED, WHEY, MOLASSES, LIQUID MANURE, RAPESEED OIL OR AS A RAINWATER TANK, ETC.. PRICE UPON REQUEST. TRANSPORT CAN BE ARRANGED AT LOW COST. ALSO WE CAN MODIFY THE TANK TO SUIT YOUR DEMANDS, JUST ASK US. IT IS NOT POSSIBLE TO UPDATE ALL OUR ADVERTISEMENTS DAILY. SINCE OUR INVENTORY IS CHANGING CONTINUOUSLY, IT MAY BE THAT THIS TANK HAS ALREADY BEEN SOLD BUT A SIMILAR ONE IS IN STOCK. PLEASE GIVE US A CALL OR WRITE, SO THAT WE CAN ADVISE YOU PERSONALLY. MORE INFORMATION AND OFFERS ON OUR SITE: PROFI-TANKS(DOT)DE
Vendedor: Profihandels GmbH
Año de construcción: usado
Precio: 12.900 €
Ubicación: Land-; gross weight [kg]: 6600; rear tyres remaining: 70; front tyres remaining: 70; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6600; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-nominal force                       t      180
bearing distance pressesframe       mm     390
shut height                         mm     305
stroke of tool holder               mm     50
adjustment of top tool holder       mm     40
platen area of bed                  mm     370 x 450
platen area of top tool holder      mm     360 x 200
pinhole in top tool holder         Ø x t   40 x 75
number of strokes                  min.-1  60
drive motor power                   kw     5,5       
main drive motor speed           min-1     1450
ejector:
stroke                              mm     30
force                                t     6
mass                                 t     4
overal dimensions b x t x h         mm     950 x 1710 x 1925
 
- subject to prior sale -  
- with the right for shorthand, technical mistakes and typos, not-binding - NOMINAL FORCE T 180 BEARING DISTANCE PRESSESFRAME MM 390 SHUT HEIGHT MM 305 STROKE OF TOOL HOLDER MM 50 ADJUSTMENT OF TOP TOOL HOLDER MM 40 PLATEN AREA OF BED MM 370 X 450 PLATEN AREA OF TOP TOOL HOLDER MM 360 X 200 PINHOLE IN TOP TOOL HOLDER Ø X T 40 X 75 NUMBER OF STROKES MIN.-1 60 DRIVE MOTOR POWER KW 5,5 MAIN DRIVE MOTOR SPEED MIN-1 1450 EJECTOR: STROKE MM 30 FORCE T 6 MASS T 4 OVERAL DIMENSIONS B X T X H MM 950 X 1710 X 1925 - SUBJECT TO PRIOR SALE - - WITH THE RIGHT FOR SHORTHAND, TECHNICAL MISTAKES AND TYPOS, NOT-BINDING -
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15227; rear tyres remaining: 70; front tyres remaining: 70; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 15227; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-drucklstg.: 40 to.
punch: 24 mm dia. 12 mm st
38 mm diameter. in 8 mm st
105 mm diameter. 3 mm st
total power: 2,2 kw / 380 v
machine weight: 1300 kg

equipment / accessories:

tool quick-change system
el. / pneumat. clutch
material stop
material requirements
tool cabinet incl. punch, matrices etc.
machine lamp
foot switch

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the hole punch in advance in our factory under power.
 DRUCKLSTG.: 40 TO. PUNCH: 24 MM DIA. 12 MM ST 38 MM DIAMETER. IN 8 MM ST 105 MM DIAMETER. 3 MM ST TOTAL POWER: 2,2 KW / 380 V MACHINE WEIGHT: 1300 KG EQUIPMENT / ACCESSORIES: TOOL QUICK-CHANGE SYSTEM EL. / PNEUMAT. CLUTCH MATERIAL STOP MATERIAL REQUIREMENTS TOOL CABINET INCL. PUNCH, MATRICES ETC. MACHINE LAMP FOOT SWITCH ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE HOLE PUNCH IN ADVANCE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-; gross weight [kg]: 2990; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2990; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-ge tm2500 mobile trailer mounted gas turbine generators 
two (2) ge tm2500 mobile trailer mounted gas turbine generators, developed specifically to respond to the need of fast deployment and electricity supply. electricity can be generated immediately even to the most remote locations around the world. full power in <10 minutes, 37% efficiency. trailer mounted, weather proof acoustic enclosures. small footprint 78’ x 21’, 87 dba average noise level, flexible dual fuel, natural gas and liquid distillate fuels, dual frequency  50/60 hz, low emissions with demineralised water injection 25 ppm (gas)/42 ppm (liquid), easy to operate and maintain, output: 29.5 mw at 60 hz (iso), 27.6 mw at 50 hz, complete with warranty. amazing deal, priced for immediate sale GE TM2500 MOBILE TRAILER MOUNTED GAS TURBINE GENERATORS TWO (2) GE TM2500 MOBILE TRAILER MOUNTED GAS TURBINE GENERATORS, DEVELOPED SPECIFICALLY TO RESPOND TO THE NEED OF FAST DEPLOYMENT AND ELECTRICITY SUPPLY. ELECTRICITY CAN BE GENERATED IMMEDIATELY EVEN TO THE MOST REMOTE LOCATIONS AROUND THE WORLD. FULL POWER IN <10 MINUTES, 37% EFFICIENCY. TRAILER MOUNTED, WEATHER PROOF ACOUSTIC ENCLOSURES. SMALL FOOTPRINT 78’ X 21’, 87 DBA AVERAGE NOISE LEVEL, FLEXIBLE DUAL FUEL, NATURAL GAS AND LIQUID DISTILLATE FUELS, DUAL FREQUENCY 50/60 HZ, LOW EMISSIONS WITH DEMINERALISED WATER INJECTION 25 PPM (GAS)/42 PPM (LIQUID), EASY TO OPERATE AND MAINTAIN, OUTPUT: 29.5 MW AT 60 HZ (ISO), 27.6 MW AT 50 HZ, COMPLETE WITH WARRANTY. AMAZING DEAL, PRICED FOR IMMEDIATE SALE
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 6010; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6010; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-caterpillar g3516 xq1250g natural gas generator sets 
used 1250 kw caterpillar g3516 xq1250g enclosed module gas generator packages, 1800 rpm, 480 volt, 60 hz, year 2012, engine g3516 low emission, generator: sr4, complete mobile package that is easy to transport and designed with 4 inch sound proof panels that will to accommodate worldwide locations. gas engine control module, advisor panel, ecmp control panel, paralleling control system, emcp engine operator interface, shore power connection, internal lighting, batteries, battery charger, circuit breaker, exhaust, cooling system. twenty five (25)available,
only sold in lots of ten (10) units.
CATERPILLAR G3516 XQ1250G NATURAL GAS GENERATOR SETS USED 1250 KW CATERPILLAR G3516 XQ1250G ENCLOSED MODULE GAS GENERATOR PACKAGES, 1800 RPM, 480 VOLT, 60 HZ, YEAR 2012, ENGINE G3516 LOW EMISSION, GENERATOR: SR4, COMPLETE MOBILE PACKAGE THAT IS EASY TO TRANSPORT AND DESIGNED WITH 4 INCH SOUND PROOF PANELS THAT WILL TO ACCOMMODATE WORLDWIDE LOCATIONS. GAS ENGINE CONTROL MODULE, ADVISOR PANEL, ECMP CONTROL PANEL, PARALLELING CONTROL SYSTEM, EMCP ENGINE OPERATOR INTERFACE, SHORE POWER CONNECTION, INTERNAL LIGHTING, BATTERIES, BATTERY CHARGER, CIRCUIT BREAKER, EXHAUST, COOLING SYSTEM. TWENTY FIVE (25)AVAILABLE, ONLY SOLD IN LOTS OF TEN (10) UNITS.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx3dk12231; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX3DK12231; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-25 mw ge lm2500 sac gas turbine 
lm2500 gas turbine, 25 mw, 11000 v, 50 hz, year 2001, fuel: natural gas (ng), this turbine can be easily converted to dle technology, where nox levels can be reached as low as 15ppm. transformers, electrical systems, control systems, cooling systems, starting system, lubricating system, pumps, fire fighting system and much more. plant has been well maintained and is in very good condition. complete power package in exceptional condition. plant has been maintained in accordance to oem maintenance schedule.
25 MW GE LM2500 SAC GAS TURBINE LM2500 GAS TURBINE, 25 MW, 11000 V, 50 HZ, YEAR 2001, FUEL: NATURAL GAS (NG), THIS TURBINE CAN BE EASILY CONVERTED TO DLE TECHNOLOGY, WHERE NOX LEVELS CAN BE REACHED AS LOW AS 15PPM. TRANSFORMERS, ELECTRICAL SYSTEMS, CONTROL SYSTEMS, COOLING SYSTEMS, STARTING SYSTEM, LUBRICATING SYSTEM, PUMPS, FIRE FIGHTING SYSTEM AND MUCH MORE. PLANT HAS BEEN WELL MAINTAINED AND IS IN VERY GOOD CONDITION. COMPLETE POWER PACKAGE IN EXCEPTIONAL CONDITION. PLANT HAS BEEN MAINTAINED IN ACCORDANCE TO OEM MAINTENANCE SCHEDULE.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 9180; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 9180; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-caterpillar c-280 diesel generator plant 
new surplus seven (7) caterpillar 5200 kw c-280 diesel engines, kato generators, 1000 rpm, 50 hz, total 36.4 mw, new surplus still in shipping crates never used. originally designed for off shore, oil rig, marine applications but can be operated onshore or for any application, epa emission class certification epa tier ii, control system, cooling system, exhaust system, fuel system, lubrication system, starting system, monitoring system, protection system, air inlet system. priced for immediate sale.
CATERPILLAR C-280 DIESEL GENERATOR PLANT NEW SURPLUS SEVEN (7) CATERPILLAR 5200 KW C-280 DIESEL ENGINES, KATO GENERATORS, 1000 RPM, 50 HZ, TOTAL 36.4 MW, NEW SURPLUS STILL IN SHIPPING CRATES NEVER USED. ORIGINALLY DESIGNED FOR OFF SHORE, OIL RIG, MARINE APPLICATIONS BUT CAN BE OPERATED ONSHORE OR FOR ANY APPLICATION, EPA EMISSION CLASS CERTIFICATION EPA TIER II, CONTROL SYSTEM, COOLING SYSTEM, EXHAUST SYSTEM, FUEL SYSTEM, LUBRICATION SYSTEM, STARTING SYSTEM, MONITORING SYSTEM, PROTECTION SYSTEM, AIR INLET SYSTEM. PRICED FOR IMMEDIATE SALE.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-; gross weight [kg]: 3680; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 215 ; GROSS WEIGHT [KG]: 3680; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 215
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-4000 kva caterpillar g3616 gas generator sets

two (2) 4000 kva/3712 kw caterpillar g3616 continues rating, gas generator packages, total 8000 kva, 5136 hp, 3 phase, p.f. 0.9, 1000 rpm, 5500 volts, 50 hz, fuel consumption: mk/bkw-hr: 9.31, maintained and serviced by caterpillar, controls, electrical system, coolers, starting system, exhaust system, piping and more, very good condition both units are priced to sell. 4000 KVA CATERPILLAR G3616 GAS GENERATOR SETS TWO (2) 4000 KVA/3712 KW CATERPILLAR G3616 CONTINUES RATING, GAS GENERATOR PACKAGES, TOTAL 8000 KVA, 5136 HP, 3 PHASE, P.F. 0.9, 1000 RPM, 5500 VOLTS, 50 HZ, FUEL CONSUMPTION: MK/BKW-HR: 9.31, MAINTAINED AND SERVICED BY CATERPILLAR, CONTROLS, ELECTRICAL SYSTEM, COOLERS, STARTING SYSTEM, EXHAUST SYSTEM, PIPING AND MORE, VERY GOOD CONDITION BOTH UNITS ARE PRICED TO SELL.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-; gross weight [kg]: 3170; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3170; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-x-axis: 1000 mm
y-axis: 800 mm
z-axis: 400 mm
taper: iso 50
control: heidenhain.
machine dimensions: 3040 x 2730 x 3165 mm
machine weight: 9000 kg. X-AXIS: 1000 MM Y-AXIS: 800 MM Z-AXIS: 400 MM TAPER: ISO 50 CONTROL: HEIDENHAIN. MACHINE DIMENSIONS: 3040 X 2730 X 3165 MM MACHINE WEIGHT: 9000 KG.
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-81 mw ge 6fa gas turbine 
81 mw ge 6fa gas turbine, simple cycle, only 1000 hours of operation since new, power plant was used for peaking operation, 50 hz, year of manufacture 2011, complete turbine package in excellent condition just like new. this is one of the most efficient, heavy duty, compact module designed gas turbines on the market today. amazing deal priced to sell.  
81 MW GE 6FA GAS TURBINE 81 MW GE 6FA GAS TURBINE, SIMPLE CYCLE, ONLY 1000 HOURS OF OPERATION SINCE NEW, POWER PLANT WAS USED FOR PEAKING OPERATION, 50 HZ, YEAR OF MANUFACTURE 2011, COMPLETE TURBINE PACKAGE IN EXCELLENT CONDITION JUST LIKE NEW. THIS IS ONE OF THE MOST EFFICIENT, HEAVY DUTY, COMPACT MODULE DESIGNED GAS TURBINES ON THE MARKET TODAY. AMAZING DEAL PRICED TO SELL.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-; gross weight [kg]: 790; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 790; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)