28 ofertas

Año de construcción: usado
Ubicación: Land-
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-availabe berstorff 4 roll calender "z" type
incl. line for conveyor belt production

calendar:
yom: 1970
roll 1850mm x 700mm, peripheral drilled
bush bearings
single drive by cardan shaft
cross axis
pre-loading

line exist of:
let-off
edge cutting unit
tension unit
centering unit
colling drums
accumulator
splicing press
wind up

without electric!
 AVAILABE BERSTORFF 4 ROLL CALENDER "Z" TYPE INCL. LINE FOR CONVEYOR BELT PRODUCTION CALENDAR: YOM: 1970 ROLL 1850MM X 700MM, PERIPHERAL DRILLED BUSH BEARINGS SINGLE DRIVE BY CARDAN SHAFT CROSS AXIS PRE-LOADING LINE EXIST OF: LET-OFF EDGE CUTTING UNIT TENSION UNIT CENTERING UNIT COLLING DRUMS ACCUMULATOR SPLICING PRESS WIND UP WITHOUT ELECTRIC!
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-available bersorff rotocure

drum diameter: 900 mm
working width: 1400 mm
machine was overhauled recently.

description in annex! AVAILABLE BERSORFF ROTOCURE DRUM DIAMETER: 900 MM WORKING WIDTH: 1400 MM MACHINE WAS OVERHAULED RECENTLY. DESCRIPTION IN ANNEX!
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-
page loading - side feeder PAGE LOADING - SIDE FEEDER
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Ubicación: Land-roll diameter: 250 mm<br/>roll length: 500 mm<br/>rolls drilled: kernbohrung <br/>nip adjustment: mechanisch <br/>drive power::  kw<br/><br/><br/><br/><br/><br/> ROLL DIAMETER: 250 MM
ROLL LENGTH: 500 MM
ROLLS DRILLED: KERNBOHRUNG
NIP ADJUSTMENT: MECHANISCH
DRIVE POWER:: KW





Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-qty 1 x berstorff 2100mm x 660mm dia two roll mill,
motorised nip adjustment, 
peripherally drilled rolls,
full unidrive gearbox with flexible couplings, 
2 x dc variable speed motors.
variable friction ratio and roll speed.
in very good condition.
 QTY 1 X BERSTORFF 2100MM X 660MM DIA TWO ROLL MILL, MOTORISED NIP ADJUSTMENT, PERIPHERALLY DRILLED ROLLS, FULL UNIDRIVE GEARBOX WITH FLEXIBLE COUPLINGS, 2 X DC VARIABLE SPEED MOTORS. VARIABLE FRICTION RATIO AND ROLL SPEED. IN VERY GOOD CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-screw size: 2 x 64 mm<br/>capacity: 800 kg/h<br/>drive: 230 kw<br/>l/d: 34/40 ld<br/><br/><br/><br/><br/> SCREW SIZE: 2 X 64 MM
CAPACITY: 800 KG/H
DRIVE: 230 KW
L/D: 34/40 LD




Vendedor: PLASTICO TRADING GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-qty 1 x berstorff 2100mm x 660mm dia two roll mill,
motorised nip adjustment, 
peripherally drilled rolls,
unidrive gearbox with flexible couplings, 
single 138kw fixed speed motor.
fixed friction/roll speed.
in very good condition.
 QTY 1 X BERSTORFF 2100MM X 660MM DIA TWO ROLL MILL, MOTORISED NIP ADJUSTMENT, PERIPHERALLY DRILLED ROLLS, UNIDRIVE GEARBOX WITH FLEXIBLE COUPLINGS, SINGLE 138KW FIXED SPEED MOTOR. FIXED FRICTION/ROLL SPEED. IN VERY GOOD CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-qty 1 x berstorff 2100mm x 660mm dia two roll mill,
motorised nip adjustment, 
peripherally drilled rolls,
full unidrive gearbox with flexible coupling, 
2 x 68kw dc variable speed motors.
variable friction ratio/roll speeds.
in very good condition.
 QTY 1 X BERSTORFF 2100MM X 660MM DIA TWO ROLL MILL, MOTORISED NIP ADJUSTMENT, PERIPHERALLY DRILLED ROLLS, FULL UNIDRIVE GEARBOX WITH FLEXIBLE COUPLING, 2 X 68KW DC VARIABLE SPEED MOTORS. VARIABLE FRICTION RATIO/ROLL SPEEDS. IN VERY GOOD CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-qty 1 x berstorff 2100mm x 660mm dia two roll mill,
manual nip adjustment, 
peripherally drilled rolls,
unidrive gearbox with flexible couplings,
single 106kw dc variable speed motor.
very good condition.
 QTY 1 X BERSTORFF 2100MM X 660MM DIA TWO ROLL MILL, MANUAL NIP ADJUSTMENT, PERIPHERALLY DRILLED ROLLS, UNIDRIVE GEARBOX WITH FLEXIBLE COUPLINGS, SINGLE 106KW DC VARIABLE SPEED MOTOR. VERY GOOD CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-4-rollers used 200 x 450 mm - calender

roll diameter: 200 mm
roller hole: hollow
number of cylinders: 4
electric control: conventional protection control, control panel for settings of speed and gap adjustment strip cutter: 2 blades, circular, manual width adjustment
 4-ROLLERS USED 200 X 450 MM - CALENDER ROLL DIAMETER: 200 MM ROLLER HOLE: HOLLOW NUMBER OF CYLINDERS: 4 ELECTRIC CONTROL: CONVENTIONAL PROTECTION CONTROL, CONTROL PANEL FOR SETTINGS OF SPEED AND GAP ADJUSTMENT STRIP CUTTER: 2 BLADES, CIRCULAR, MANUAL WIDTH ADJUSTMENT
Vendedor: USD Gebrauchtmaschinen GmbH
Año de construcción: usado
Ubicación: Land-qty 1 x berstorff 4 roll inverted l calender,
serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012),
roll sizes: 850mm dia x 2440mm wide,
peripherally drilled rolls (steam/high pressure hot water heating),
motorised nip adjustment,
cross axis, roll bending, hydraulic preload etc.
2 speed unidrive gearbox on universal couplings,
speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm,
with 98kw dc variable speed motor fitted to each roll.
operator controls renewed recently (siemens s7 plc)

downstream equipment:
set of 5 x cooling drums
beta thickness measuring device
edge trimming unit
menzel length cutter
3 position winder
complete and in very good condition. 2 spare rolls. QTY 1 X BERSTORFF 4 ROLL INVERTED L CALENDER, SERIAL NUMBER: 11892-907, ORIGINAL YEAR 1966 (BUT UPGRADED/REFURBISHED IN 2012), ROLL SIZES: 850MM DIA X 2440MM WIDE, PERIPHERALLY DRILLED ROLLS (STEAM/HIGH PRESSURE HOT WATER HEATING), MOTORISED NIP ADJUSTMENT, CROSS AXIS, ROLL BENDING, HYDRAULIC PRELOAD ETC. 2 SPEED UNIDRIVE GEARBOX ON UNIVERSAL COUPLINGS, SPEED SETTING 1: 33.7 RPM, SPEED SETTING 2: 16.85 RPM, WITH 98KW DC VARIABLE SPEED MOTOR FITTED TO EACH ROLL. OPERATOR CONTROLS RENEWED RECENTLY (SIEMENS S7 PLC) DOWNSTREAM EQUIPMENT: SET OF 5 X COOLING DRUMS BETA THICKNESS MEASURING DEVICE EDGE TRIMMING UNIT MENZEL LENGTH CUTTER 3 POSITION WINDER COMPLETE AND IN VERY GOOD CONDITION. 2 SPARE ROLLS.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-used 3 rolls rubber calender berstorff from the tireline.
rolls dia.
2 x 300mm
middle roll 250mm 
rolls overall length: 700mm 
working length: 500mm
main motor power: 51,5kw

middle roll is designed for shaping covers application.
    USED 3 ROLLS RUBBER CALENDER BERSTORFF FROM THE TIRELINE. ROLLS DIA. 2 X 300MM MIDDLE ROLL 250MM ROLLS OVERALL LENGTH: 700MM WORKING LENGTH: 500MM MAIN MOTOR POWER: 51,5KW MIDDLE ROLL IS DESIGNED FOR SHAPING COVERS APPLICATION.
Vendedor: OLLER-TRADE
Año de construcción: usado
Ubicación: Land-qty 1 x used berstorff auma 
serial no. ao 3178/75, year 1975,
main drum width +/- 2500mm
main drum dia +/- 3000mm
aux drum dia. 1400mm
thermal oil heating
with sandvik 2250mm 1650sm grade stainless steel belt 1.8mm thick.
hydraulic pressure 350kp/cm 
with 40hp motor and 3 stage reduction gearbox.
the main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's). 

*note also available: 1 x new/unused spare sandvik 1650sm grade stainless steel belt, 2250mm wide (in original crate).  QTY 1 X USED BERSTORFF AUMA  SERIAL NO. AO 3178/75, YEAR 1975, MAIN DRUM WIDTH +/- 2500MM MAIN DRUM DIA +/- 3000MM AUX DRUM DIA. 1400MM THERMAL OIL HEATING WITH SANDVIK 2250MM 1650SM GRADE STAINLESS STEEL BELT 1.8MM THICK. HYDRAULIC PRESSURE 350KP/CM  WITH 40HP MOTOR AND 3 STAGE REDUCTION GEARBOX. THE MAIN DRUM AND STEEL BELT ARE IN GOOD/SERVICEABLE CONDITION (THE DRUM AND BELT WERE REPLACED IN 1990'S).  *NOTE ALSO AVAILABLE: 1 X NEW/UNUSED SPARE SANDVIK 1650SM GRADE STAINLESS STEEL BELT, 2250MM WIDE (IN ORIGINAL CRATE).
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-qty 1 x berstorff auma,
original year of manufacture 1972,
main drum 1700mm wide x 1000mm dia,
aux drums 1700mm x 600mm dia,
steam heated,
currently with 1660mm wide rubber coated woven steel belt,
max pressure 192 bar (approx 3000psi),
2 speed gearbox,
modern 5.5kw dc variable speed motor.
including let off and wind up units.
complete and in good working condition. QTY 1 X BERSTORFF AUMA, ORIGINAL YEAR OF MANUFACTURE 1972, MAIN DRUM 1700MM WIDE X 1000MM DIA, AUX DRUMS 1700MM X 600MM DIA, STEAM HEATED, CURRENTLY WITH 1660MM WIDE RUBBER COATED WOVEN STEEL BELT, MAX PRESSURE 192 BAR (APPROX 3000PSI), 2 SPEED GEARBOX, MODERN 5.5KW DC VARIABLE SPEED MOTOR. INCLUDING LET OFF AND WIND UP UNITS. COMPLETE AND IN GOOD WORKING CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-berstorff roller die with extruder
year: 1990
supply: warm in form of strips
inlet temperature: 120°c eva
150°c tpr
gap between the rollers is adjustable (technically possible to go to zero thickness)
max. production: 600kg per hour
screw diameter: 200mm
effective screw length: 1600 mm ( 8d )
maximum number of operating speed of screw: 30 / min
maximum operating pressure: 100 bar (set on the pressure before commissioning)
heated zone: 
1x screw
1x roller
cooling zone: 1x filling zone
extruder height: 1350 mm
drive – power: 100kw
rated torque: 40 000nm
transfer: 1:18
heated – screw – heating power: 18kw
cooling power: 41,8kw on 150°c
roller – heating power: 30kw
cooling power: 69,6kw on 150°c
cooling - water quantity: 3m3 per hour
double roller:
storing the rolls superimposed the diameter of the rolls 400 mm the length of the rolls 900 mm working width 600 mm speed - maximum 10 m / min. dimension of roller: length 2000 mm height 2800 mm
cooler
length 12000 mm
width 1040 mm
working width 800 mm BERSTORFF ROLLER DIE WITH EXTRUDER YEAR: 1990 SUPPLY: WARM IN FORM OF STRIPS INLET TEMPERATURE: 120°C EVA 150°C TPR GAP BETWEEN THE ROLLERS IS ADJUSTABLE (TECHNICALLY POSSIBLE TO GO TO ZERO THICKNESS) MAX. PRODUCTION: 600KG PER HOUR SCREW DIAMETER: 200MM EFFECTIVE SCREW LENGTH: 1600 MM ( 8D ) MAXIMUM NUMBER OF OPERATING SPEED OF SCREW: 30 / MIN MAXIMUM OPERATING PRESSURE: 100 BAR (SET ON THE PRESSURE BEFORE COMMISSIONING) HEATED ZONE: 1X SCREW 1X ROLLER COOLING ZONE: 1X FILLING ZONE EXTRUDER HEIGHT: 1350 MM DRIVE – POWER: 100KW RATED TORQUE: 40 000NM TRANSFER: 1:18 HEATED – SCREW – HEATING POWER: 18KW COOLING POWER: 41,8KW ON 150°C ROLLER – HEATING POWER: 30KW COOLING POWER: 69,6KW ON 150°C COOLING - WATER QUANTITY: 3M3 PER HOUR DOUBLE ROLLER: STORING THE ROLLS SUPERIMPOSED THE DIAMETER OF THE ROLLS 400 MM THE LENGTH OF THE ROLLS 900 MM WORKING WIDTH 600 MM SPEED - MAXIMUM 10 M / MIN. DIMENSION OF ROLLER: LENGTH 2000 MM HEIGHT 2800 MM COOLER LENGTH 12000 MM WIDTH 1040 MM WORKING WIDTH 800 MM
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-auma 10 rotorcure 
manufacturer: berstorff
heating cylinder diameter 1000 mm
hot steam
cylinder volume: 1135 liters
steam pressure heating: 8 bars
cylinder test pressure: 14 bar
motorization: asynchronous main motor on frequency converter
engine power: 15kw
scrolling speed range: 0.18m / min - 0.49m / min
maximum width (belt width is 1450 mm. 
currently run at 2.6 mm. can run to 1 cm
carpet width: 145 cm
width of the cylinder: 170 cm
 AUMA 10 ROTORCURE MANUFACTURER: BERSTORFF HEATING CYLINDER DIAMETER 1000 MM HOT STEAM CYLINDER VOLUME: 1135 LITERS STEAM PRESSURE HEATING: 8 BARS CYLINDER TEST PRESSURE: 14 BAR MOTORIZATION: ASYNCHRONOUS MAIN MOTOR ON FREQUENCY CONVERTER ENGINE POWER: 15KW SCROLLING SPEED RANGE: 0.18M / MIN - 0.49M / MIN MAXIMUM WIDTH (BELT WIDTH IS 1450 MM. CURRENTLY RUN AT 2.6 MM. CAN RUN TO 1 CM CARPET WIDTH: 145 CM WIDTH OF THE CYLINDER: 170 CM
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-berstorff 90mm cold feed extruder 
diameter – 90 mm;
l/d ratio – 16:1;
special screw design for silicone extrusion;
optional vacuum feeding 
complete electrics with frequency inverter
ac motor – 45 kw
in excellent mechanical condition
 BERSTORFF 90MM COLD FEED EXTRUDER DIAMETER – 90 MM; L/D RATIO – 16:1; SPECIAL SCREW DESIGN FOR SILICONE EXTRUSION; OPTIONAL VACUUM FEEDING COMPLETE ELECTRICS WITH FREQUENCY INVERTER AC MOTOR – 45 KW IN EXCELLENT MECHANICAL CONDITION
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land- extruder ke 90 x 30-d for manufacturing of von tpe foam and compact profiles

screw diameter: 90 mm
l/d ratio 30:1 (2700mm)
extruder with 11 temperature-controlled zones (electrically heated by fluids)
siemens electric drive, motor 45kw at 2500rpm
year of construction 1996, machine in very good condition (preliminary used in test operations)
melt application device (gear pump)
double profil head (also used for extrusion-coaded framework belts) 
electric equipment partially available
extruder mounted on movable baseplate
  EXTRUDER KE 90 X 30-D FOR MANUFACTURING OF VON TPE FOAM AND COMPACT PROFILES SCREW DIAMETER: 90 MM L/D RATIO 30:1 (2700MM) EXTRUDER WITH 11 TEMPERATURE-CONTROLLED ZONES (ELECTRICALLY HEATED BY FLUIDS) SIEMENS ELECTRIC DRIVE, MOTOR 45KW AT 2500RPM YEAR OF CONSTRUCTION 1996, MACHINE IN VERY GOOD CONDITION (PRELIMINARY USED IN TEST OPERATIONS) MELT APPLICATION DEVICE (GEAR PUMP) DOUBLE PROFIL HEAD (ALSO USED FOR EXTRUSION-COADED FRAMEWORK BELTS) ELECTRIC EQUIPMENT PARTIALLY AVAILABLE EXTRUDER MOUNTED ON MOVABLE BASEPLATE
Vendedor: K & K Industrievertretungen GmbH
Año de construcción: usado
Ubicación: Land-extruder as a single machine for plastification and mixing of pvc as a calendar feed, including accessories such as conveyor belt, metal separators, etc.
comprehensive modernisation 1995

technical data
screw diameter:      250 mm
ratio l/d:            6d
drive capacity:       65 kw
capacity, max.     1.600 kg/h      EXTRUDER AS A SINGLE MACHINE FOR PLASTIFICATION AND MIXING OF PVC AS A CALENDAR FEED, INCLUDING ACCESSORIES SUCH AS CONVEYOR BELT, METAL SEPARATORS, ETC. COMPREHENSIVE MODERNISATION 1995 TECHNICAL DATA SCREW DIAMETER: 250 MM RATIO L/D: 6D DRIVE CAPACITY: 65 KW CAPACITY, MAX. 1.600 KG/H
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-extruder as single machine for plastification and mixing of pvc for calender-feeding, incl. accessories like transport beld, metall detector, etc., genearal modernisation in 1995

technical data
screw diameter:     250 mm
ratio l/d:           6d
drive capacity:      65 kw
capacity, max.    1.600 kg/h 
    EXTRUDER AS SINGLE MACHINE FOR PLASTIFICATION AND MIXING OF PVC FOR CALENDER-FEEDING, INCL. ACCESSORIES LIKE TRANSPORT BELD, METALL DETECTOR, ETC., GENEARAL MODERNISATION IN 1995 TECHNICAL DATA SCREW DIAMETER: 250 MM RATIO L/D: 6D DRIVE CAPACITY: 65 KW CAPACITY, MAX. 1.600 KG/H
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-1 complete roller-mill as single machine, rollers made of cast iron, incl. accessories like transportbelt, howl-off, etc. for plastification and mixing of pvc. roller-mill is modernized in 1995:

technical data
roller surface width: 1800 mm
roller diameter:       600 mm
drive caacity:          90 kw      1 COMPLETE ROLLER-MILL AS SINGLE MACHINE, ROLLERS MADE OF CAST IRON, INCL. ACCESSORIES LIKE TRANSPORTBELT, HOWL-OFF, ETC. FOR PLASTIFICATION AND MIXING OF PVC. ROLLER-MILL IS MODERNIZED IN 1995: TECHNICAL DATA ROLLER SURFACE WIDTH: 1800 MM ROLLER DIAMETER: 600 MM DRIVE CAACITY: 90 KW
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-calender feed (pvc-plastifierungs line)

year of construction: 1965/95/98
electr. services::
heating mixer: 80 kw
banbury mixer: 250 kw
rolling mill: 90 kw
strainer: 65 kw

consisting of the following main components: heating / cooling mixer combination, banbury mixer (guix 75 l), roller-mill (1,800 x 600 mm), strainer (ke 250 x 6 d), different conveyor belts with metal-detector (single components available by appointment).

pvc lamination.

  CALENDER FEED (PVC-PLASTIFIERUNGS LINE) YEAR OF CONSTRUCTION: 1965/95/98 ELECTR. SERVICES:: HEATING MIXER: 80 KW BANBURY MIXER: 250 KW ROLLING MILL: 90 KW STRAINER: 65 KW CONSISTING OF THE FOLLOWING MAIN COMPONENTS: HEATING / COOLING MIXER COMBINATION, BANBURY MIXER (GUIX 75 L), ROLLER-MILL (1,800 X 600 MM), STRAINER (KE 250 X 6 D), DIFFERENT CONVEYOR BELTS WITH METAL-DETECTOR (SINGLE COMPONENTS AVAILABLE BY APPOINTMENT). PVC LAMINATION.
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-4-rollers calendering-line
consisting of following main-components: banbury-mixer (guix 75 l),
extruder (250 mm), roller-mill (1.800 mm x 600 mm),
4-rollers calender (z-type), howl-off, tempering-and cooling range, area-weight-measuring (1996), rewinder, drive and control (euroterm) completely 
modernised (1995/1996). 

roller surface width: 1900 mm
working width, max:   1.500 mm
roller diameter:      800 mm
productionsspeed:     average 50 m / min
capacity:             1.500 kg / h        4-ROLLERS CALENDERING-LINE CONSISTING OF FOLLOWING MAIN-COMPONENTS: BANBURY-MIXER (GUIX 75 L), EXTRUDER (250 MM), ROLLER-MILL (1.800 MM X 600 MM), 4-ROLLERS CALENDER (Z-TYPE), HOWL-OFF, TEMPERING-AND COOLING RANGE, AREA-WEIGHT-MEASURING (1996), REWINDER, DRIVE AND CONTROL (EUROTERM) COMPLETELY MODERNISED (1995/1996). ROLLER SURFACE WIDTH: 1900 MM WORKING WIDTH, MAX: 1.500 MM ROLLER DIAMETER: 800 MM PRODUCTIONSSPEED: AVERAGE 50 M / MIN CAPACITY: 1.500 KG / H
Vendedor: plast consult Ing.-Ges. mbH
Año de construcción: usado
Ubicación: Land-roller surface width: 1.200 mm
working width: 900 - 1.000 mm
production speed: 4 - 40 m/min
capacity: 400 - 500 kg/h


complete 2-rollers calender-line / kalandrette with vacuum-feeding unit for dosing and weighing of raw materials, weighing unit for small components, heat-/cooling-mixer, metall separator, planetary-extruder, calender, how-off, tempering range, cooling rollers with lenght-cutting device, 3-bale turret rewinder, all tempering-units which were needed for productions- process      ROLLER SURFACE WIDTH: 1.200 MM WORKING WIDTH: 900 - 1.000 MM PRODUCTION SPEED: 4 - 40 M/MIN CAPACITY: 400 - 500 KG/H COMPLETE 2-ROLLERS CALENDER-LINE / KALANDRETTE WITH VACUUM-FEEDING UNIT FOR DOSING AND WEIGHING OF RAW MATERIALS, WEIGHING UNIT FOR SMALL COMPONENTS, HEAT-/COOLING-MIXER, METALL SEPARATOR, PLANETARY-EXTRUDER, CALENDER, HOW-OFF, TEMPERING RANGE, COOLING ROLLERS WITH LENGHT-CUTTING DEVICE, 3-BALE TURRET REWINDER, ALL TEMPERING-UNITS WHICH WERE NEEDED FOR PRODUCTIONS- PROCESS
Vendedor: plast consult Ing.-Ges. mbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)