43 ofertas

Año de construcción: usado
Ubicación: Land-bianco batch preparation. year 1997
 
model linea preparazione
 
roller width 2.000 mm BIANCO BATCH PREPARATION. YEAR 1997 MODEL LINEA PREPARAZIONE ROLLER WIDTH 2.000 MM
Vendedor: Inautex
Año de construcción: usado
Precio: 3.150 €
Ubicación: Land-: 2.450 x 27 x 0,9 mm<br/>: 935 mm<br/>: 1.200 x 1.100 x 1.800 mm<br/>: 1.200 x 750 x 1.550 mm<br/>: 202 kg<br/>manual vice with lever for quick clamping<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 220 mm, square 220 mm, rectangular 260 x 140 mm<br/>45°: round 160 mm, square 155 mm, rectangular 160 x 140 mm<br/>60°: round 95 mm, square 95 mm, rectangular 95 x 95 mm<br/>blade dimension: 2.450 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 935 mm<br/>motor: 0,33/0,55 kw<br/>measurements: 1.200 x 1.100 x 1.800 mm<br/>transport measurements: 1.200 x 750 x 1.550 mm<br/>weight: 202 kg<br/><br/><br/><br/> : 2.450 X 27 X 0,9 MM
: 935 MM
: 1.200 X 1.100 X 1.800 MM
: 1.200 X 750 X 1.550 MM
: 202 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 220 MM, SQUARE 220 MM, RECTANGULAR 260 X 140 MM
45°: ROUND 160 MM, SQUARE 155 MM, RECTANGULAR 160 X 140 MM
60°: ROUND 95 MM, SQUARE 95 MM, RECTANGULAR 95 X 95 MM
BLADE DIMENSION: 2.450 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 935 MM
MOTOR: 0,33/0,55 KW
MEASUREMENTS: 1.200 X 1.100 X 1.800 MM
TRANSPORT MEASUREMENTS: 1.200 X 750 X 1.550 MM
WEIGHT: 202 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-stock number: 3387
band saw machine
manufacturer: bianco, type: 350 a machine no.: 53/00375, year of construction: 1997

specifications: gr. saw capacity slide.     			260 mm mm ã?
cutting speed 20-100 mm / min
total 1.57 kw
automatic feed.
hydraulic vise.
runway.
gr. saw capacity of rectangular 315 mm x 220 mm blade size 3010 x 27 x 0,9 mm length: 3300 mm, height: 1800 mm, width: 1800 mm, weight: 800 kg
 STOCK NUMBER: 3387 BAND SAW MACHINE MANUFACTURER: BIANCO, TYPE: 350 A MACHINE NO.: 53/00375, YEAR OF CONSTRUCTION: 1997 SPECIFICATIONS: GR. SAW CAPACITY SLIDE. 260 MM MM &ATILDE;? CUTTING SPEED 20-100 MM / MIN TOTAL 1.57 KW AUTOMATIC FEED. HYDRAULIC VISE. RUNWAY. GR. SAW CAPACITY OF RECTANGULAR 315 MM X 220 MM BLADE SIZE 3010 X 27 X 0,9 MM LENGTH: 3300 MM, HEIGHT: 1800 MM, WIDTH: 1800 MM, WEIGHT: 800 KG
Vendedor: DenTool LTD
Año de construcción: usado
Precio: 7.300 €
Ubicación: Land-: 3.120 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.550 x 1.400 x 1.750 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 420 kg<br/>manual vice with lever for quick clamping<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/>digital readout for mitre cuts<br/><br/>cutting capacity:<br/>90°: round 280 mm, square 240 mm, rectangular 350 x 140 mm<br/>+ 45° right: round 230 mm, square 200 mm, rectangular 230 x 120 mm<br/>- 45° left: round 200 mm, square 170 mm, rectangular 220 x 120 mm<br/>+ 60° right: round 150 mm, square 130 mm, rectangular 130 x 130 mm<br/>blade dimension: 3.120 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.550 x 1.400 x 1.750 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 420 kg<br/><br/><br/><br/> : 3.120 X 27 X 0,9 MM
: 830 MM
: 1.550 X 1.400 X 1.750 MM
: 1.450 X 750 X 1.500 MM
: 420 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT
DIGITAL READOUT FOR MITRE CUTS

CUTTING CAPACITY:
90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 350 X 140 MM
+ 45° RIGHT: ROUND 230 MM, SQUARE 200 MM, RECTANGULAR 230 X 120 MM
- 45° LEFT: ROUND 200 MM, SQUARE 170 MM, RECTANGULAR 220 X 120 MM
+ 60° RIGHT: ROUND 150 MM, SQUARE 130 MM, RECTANGULAR 130 X 130 MM
BLADE DIMENSION: 3.120 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.550 X 1.400 X 1.750 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 420 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-roll width: 2400mm, working width: 2200mm.  ROLL WIDTH: 2400MM, WORKING WIDTH: 2200MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 12.850 €
Ubicación: Land-: 3.120 x 27 x 0,9 mm<br/>: 835 mm<br/>: 3.220 x 1.950 x 1.900 mm<br/>: 2.400 x 1.700 x 1.700 mm<br/>: 1.090 kg<br/>hydraulic, fully automatic bandsaw <br/> <br/>automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp <br/>automatic feed 600 mm/stroke,<br/>adjustment by handwheel, counter and limitswitch<br/>variable cutting pressure<br/>machine with 2 cutting speeds <br/>cutting fluid system <br/>automatic saw blade breakage detection <br/>quick clamping vice <br/>length stop 0-500 mm and material chute <br/>user manual in german <br/><br/><br/>alternative:<br/><br/>modell 370 ae 60° cnc euro  15.750,--<br/>as above model, but material feed and <br/>number of pieces by cnc<br/><br/>cutting capacity 90°: round 280 mm, square 240 mm, rectangular 330 x 240 mm<br/>cutting capacity 45°: round 225 mm, square 215 mm, rectangular 230 x 140 mm<br/>cutting capacity 60°: round 140 mm, square 140 mm, rectangular 140 x 130 mm<br/>cutting speed: 35/70 m/min<br/>motor: 0,9/1,5 kw<br/>band dimension: 3.120 x 27 x 0,9 mm<br/>working height: 835 mm<br/>measurements: length: 3.220 x 1.950 x 1.900 mm<br/>transport measurements: width: 2.400 x 1.700 x 1.700 mm<br/>weight: 1.090 kg<br/><br/><br/><br/> : 3.120 X 27 X 0,9 MM
: 835 MM
: 3.220 X 1.950 X 1.900 MM
: 2.400 X 1.700 X 1.700 MM
: 1.090 KG
HYDRAULIC, FULLY AUTOMATIC BANDSAW

AUTOMATIC CUTTING CYCLE CLAMPING, SAW BLADE AND CUTTING FLUID ON, CUTTING OPERATION, SAW BLADE AND CUTTING FLUID OFF, FAST RETURN STROKE, DECLAMP
AUTOMATIC FEED 600 MM/STROKE,
ADJUSTMENT BY HANDWHEEL, COUNTER AND LIMITSWITCH
VARIABLE CUTTING PRESSURE
MACHINE WITH 2 CUTTING SPEEDS
CUTTING FLUID SYSTEM
AUTOMATIC SAW BLADE BREAKAGE DETECTION
QUICK CLAMPING VICE
LENGTH STOP 0-500 MM AND MATERIAL CHUTE
USER MANUAL IN GERMAN


ALTERNATIVE:

MODELL 370 AE 60° CNC EURO  15.750,--
AS ABOVE MODEL, BUT MATERIAL FEED AND
NUMBER OF PIECES BY CNC

CUTTING CAPACITY 90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 330 X 240 MM
CUTTING CAPACITY 45°: ROUND 225 MM, SQUARE 215 MM, RECTANGULAR 230 X 140 MM
CUTTING CAPACITY 60°: ROUND 140 MM, SQUARE 140 MM, RECTANGULAR 140 X 130 MM
CUTTING SPEED: 35/70 M/MIN
MOTOR: 0,9/1,5 KW
BAND DIMENSION: 3.120 X 27 X 0,9 MM
WORKING HEIGHT: 835 MM
MEASUREMENTS: LENGTH: 3.220 X 1.950 X 1.900 MM
TRANSPORT MEASUREMENTS: WIDTH: 2.400 X 1.700 X 1.700 MM
WEIGHT: 1.090 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-bianco batch preparation, year 1997
 
model linea preparatzione
 
roller width 2.000 mm BIANCO BATCH PREPARATION, YEAR 1997 MODEL LINEA PREPARATZIONE ROLLER WIDTH 2.000 MM
Vendedor: Inautex
Año de construcción: usado
Precio: 17.200 €
Ubicación: Land-: 3.270 x 27 x 0,9 mm<br/>: 835 mm<br/>: 2.800 x 2.000 x 1.900 mm<br/>: 2.400 x 1.700 x 1.700 mm<br/>: 1.090 kg<br/>hydraulic, fully automatic bandsaw <br/> <br/>automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp <br/>automatic feed 600 mm/stroke,<br/>adjustment by handwheel, counter and limitswitch<br/>variable cutting pressure. <br/>machine with 2 cutting speeds <br/>cutting fluid system <br/>automatic saw blade breakage detection <br/>quick clamping vice <br/>length stop 0-500 mm and material chute <br/>user manual in german <br/><br/><br/>alternative:<br/><br/>model 420 a 60° cnc        euro  22.200,--<br/>as obove model, but material feed and <br/>number of pieces by cnc<br/><br/> <br/><br/><br/><br/>cutting capacity 90°: round 300 mm, square 240 mm, rectangular 420 x 200 mm<br/>cutting capacity 45°: round 240 mm, square 230 mm, rectangular 270 x 140 mm<br/>cutting capacity 60°: round 170 mm, square 170 mm, rectangular 170 x 170 mm<br/>cutting speed: 35/70 m/min<br/>motor: 0,9/1,5 kw<br/>band dimension: 3.270 x 27 x 0,9 mm<br/>working height: 835 mm<br/>measurements: 2.800 x 2.000 x 1.900 mm<br/>transport measurements: 2.400 x 1.700 x 1.700 mm<br/>weight: 1.090 kg<br/><br/><br/><br/> : 3.270 X 27 X 0,9 MM
: 835 MM
: 2.800 X 2.000 X 1.900 MM
: 2.400 X 1.700 X 1.700 MM
: 1.090 KG
HYDRAULIC, FULLY AUTOMATIC BANDSAW

AUTOMATIC CUTTING CYCLE CLAMPING, SAW BLADE AND CUTTING FLUID ON, CUTTING OPERATION, SAW BLADE AND CUTTING FLUID OFF, FAST RETURN STROKE, DECLAMP
AUTOMATIC FEED 600 MM/STROKE,
ADJUSTMENT BY HANDWHEEL, COUNTER AND LIMITSWITCH
VARIABLE CUTTING PRESSURE.
MACHINE WITH 2 CUTTING SPEEDS
CUTTING FLUID SYSTEM
AUTOMATIC SAW BLADE BREAKAGE DETECTION
QUICK CLAMPING VICE
LENGTH STOP 0-500 MM AND MATERIAL CHUTE
USER MANUAL IN GERMAN


ALTERNATIVE:

MODEL 420 A 60° CNC        EURO  22.200,--
AS OBOVE MODEL, BUT MATERIAL FEED AND
NUMBER OF PIECES BY CNC





CUTTING CAPACITY 90°: ROUND 300 MM, SQUARE 240 MM, RECTANGULAR 420 X 200 MM
CUTTING CAPACITY 45°: ROUND 240 MM, SQUARE 230 MM, RECTANGULAR 270 X 140 MM
CUTTING CAPACITY 60°: ROUND 170 MM, SQUARE 170 MM, RECTANGULAR 170 X 170 MM
CUTTING SPEED: 35/70 M/MIN
MOTOR: 0,9/1,5 KW
BAND DIMENSION: 3.270 X 27 X 0,9 MM
WORKING HEIGHT: 835 MM
MEASUREMENTS: 2.800 X 2.000 X 1.900 MM
TRANSPORT MEASUREMENTS: 2.400 X 1.700 X 1.700 MM
WEIGHT: 1.090 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-reggiani   1996-2200mm                                                                      12 colours of which 12 are currently all in use.
gas fired, 5 chamber dryer. 
3 pass tensionless entry by testa kalin brushing.
e & l centralising dogal roller.
complete with 2 sets of squeegees 1.8 and 2.4.
take off by batcher.   

termoelettronica colour kitchen print paste, year 2001
termoelettronica colour kitchen for print paste, 2 stations plc controls ct-401, 
with maino paternosta and zanzattori paste mixing included.   

  stentex stenter range, 2400mm ww, year 1996
stentex multi layer stenter frame, high entry with bianco scroll rollers,
beta 3 bowl padder 2400 mm, 
bianco weft straightener type digitex e+l guiders type fr 1501, 
overfeeding 4 chambers, 6 passes gas heated maxon burners valupak bv, 
vertical pin chain, gumming and trimming, exit by cooling zone, exit by roller and a-frame.

   mt inspection & packing, 2000mm ww year 1996 
inspection and packaging line comprising of: 3x inspection and rolling machines, conveyor and wraping machine with new labelling system.
                                                                                                                                                                                                                                                                             REGGIANI 1996-2200MM 12 COLOURS OF WHICH 12 ARE CURRENTLY ALL IN USE. GAS FIRED, 5 CHAMBER DRYER. 3 PASS TENSIONLESS ENTRY BY TESTA KALIN BRUSHING. E & L CENTRALISING DOGAL ROLLER. COMPLETE WITH 2 SETS OF SQUEEGEES 1.8 AND 2.4. TAKE OFF BY BATCHER. TERMOELETTRONICA COLOUR KITCHEN PRINT PASTE, YEAR 2001 TERMOELETTRONICA COLOUR KITCHEN FOR PRINT PASTE, 2 STATIONS PLC CONTROLS CT-401, WITH MAINO PATERNOSTA AND ZANZATTORI PASTE MIXING INCLUDED. STENTEX STENTER RANGE, 2400MM WW, YEAR 1996 STENTEX MULTI LAYER STENTER FRAME, HIGH ENTRY WITH BIANCO SCROLL ROLLERS, BETA 3 BOWL PADDER 2400 MM, BIANCO WEFT STRAIGHTENER TYPE DIGITEX E+L GUIDERS TYPE FR 1501, OVERFEEDING 4 CHAMBERS, 6 PASSES GAS HEATED MAXON BURNERS VALUPAK BV, VERTICAL PIN CHAIN, GUMMING AND TRIMMING, EXIT BY COOLING ZONE, EXIT BY ROLLER AND A-FRAME. MT INSPECTION & PACKING, 2000MM WW YEAR 1996 INSPECTION AND PACKAGING LINE COMPRISING OF: 3X INSPECTION AND ROLLING MACHINES, CONVEYOR AND WRAPING MACHINE WITH NEW LABELLING SYSTEM.
Vendedor: American Traders
Año de construcción: usado
Precio: 8.050 €
Ubicación: Land-: 3.270 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.650 x 1.200 x 1.900 mm<br/>: 1.450 x 800 x 1.450 mm<br/>: 400 kg<br/>hydraulic vice<br/>saw beam moves up and down by hydraulic cylinder<br/>fast descent<br/>automatic fast up/down conrolled by feeler pin<br/>adjustable pressure according to section and type of material<br/>double safety buton for cycle start<br/>2 speeds<br/>coolant equipment<br/><br/>cutting cycle<br/>vice locking, quick bow pull-down hydraulically operated, blade rotation and cooling liquid start-up, <br/>working pull-down, end of the cutting cycle, stop of blade rotation and supply of cooling liquid, <br/>quick bow lift-up, stop of bow upwards movement, vice unlocking if selected.<br/><br/><br/>optional equipmente: adjustable vice pressure     eur 310,--<br/><br/><br/>cutting capacity:<br/>90°: round 300 mm,  square 240 mm, rectangular 420 x 200 mm<br/>45°: round 240 mm,  square 230 mm, rectangular 270 x 140 mm<br/>60°: round 170 mm,  square 170 mm, rectangular 170 x 170 mm<br/>blade dimension: 3.270 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>fast descent: 3.500 mm/min<br/>working descent: 0-200 mm/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.650 x 1.200 x 1.900 mm<br/>transport measurements: 1.450 x 800 x 1.450 mm<br/>weight: 400 kg<br/><br/><br/><br/> : 3.270 X 27 X 0,9 MM
: 830 MM
: 1.650 X 1.200 X 1.900 MM
: 1.450 X 800 X 1.450 MM
: 400 KG
HYDRAULIC VICE
SAW BEAM MOVES UP AND DOWN BY HYDRAULIC CYLINDER
FAST DESCENT
AUTOMATIC FAST UP/DOWN CONROLLED BY FEELER PIN
ADJUSTABLE PRESSURE ACCORDING TO SECTION AND TYPE OF MATERIAL
DOUBLE SAFETY BUTON FOR CYCLE START
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CYCLE
VICE LOCKING, QUICK BOW PULL-DOWN HYDRAULICALLY OPERATED, BLADE ROTATION AND COOLING LIQUID START-UP,
WORKING PULL-DOWN, END OF THE CUTTING CYCLE, STOP OF BLADE ROTATION AND SUPPLY OF COOLING LIQUID,
QUICK BOW LIFT-UP, STOP OF BOW UPWARDS MOVEMENT, VICE UNLOCKING IF SELECTED.


OPTIONAL EQUIPMENTE: ADJUSTABLE VICE PRESSURE     EUR 310,--


CUTTING CAPACITY:
90°: ROUND 300 MM, SQUARE 240 MM, RECTANGULAR 420 X 200 MM
45°: ROUND 240 MM, SQUARE 230 MM, RECTANGULAR 270 X 140 MM
60°: ROUND 170 MM, SQUARE 170 MM, RECTANGULAR 170 X 170 MM
BLADE DIMENSION: 3.270 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
FAST DESCENT: 3.500 MM/MIN
WORKING DESCENT: 0-200 MM/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.650 X 1.200 X 1.900 MM
TRANSPORT MEASUREMENTS: 1.450 X 800 X 1.450 MM
WEIGHT: 400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-textile finish line and dyeing line

 

1. rolling machine

make:roll tech(korea)

year:2011

 rubber roller : ?165×2,300?×3ea

spnge roller : ?165×2,300?×2ea

 

2 large centrifugal dehydrator

make:manduk(korea)

year:2011

basket size : 1,520×1200(h)?

basket cap' : 500?

motor : 18.5?

rpm : 0 - 700r.p.m

 

3 turning machine

make:total(korea)

year:2011

type : vertical

turbo blower

 -speed : 3,500rpm

 -power : 7.5?

 

4 cck-? system

make:daerim(korea)

year:2011

(computer color kitchen)system

 (1)hardware

 model:color focus-?(dlf-124)

 124dyes type (1000cc×24ea,500cc×100ea)

(2)software

(3)stock solution maker

model:dye focus-?(dlf-071)

storage tank : 5l(hot water),

            5l(cold water)

5 ir dyeing machine x 2sets

make:daerim(korea)

year:2011

type: infrared dye

model:dl-6000(starlet-3)

standard items:24hanging

50cc-23ea,sensor pot-1ea

temp.:25~140?

cooling :fan air circulation

rpm:0~60rpm/min

 

6 water bath shaker

 make:daerim(korea)

year:2011

flask holder:250?×60ea-2bath

temperature range:25~100?

reciprocating speed:25~150rpm/min

speed controller:1set

7 water setting machine

make: b.h(korea)

year:2011

 

8 turn tablex 4sets

make: b.h(korea)

year:2011

plate: 9t×?2,180?

      9t×?2,300?

 

9 dyeing machine

make: b.h(korea)

year:2011

cap':400?

max.temp:140?

max.press:4?/?

 

10 automatic packing machine

make:hyosan(korea)

year;2011

w)belt conveyor:  500(w)×3,000(l)?

 

11 sun-super s. tenter

make:ilsung(korea)

year;2011

chmaber : 8 c/b

working width : 2300?

speed : 120m/min

 

12 high pressure dyeing machine

make:daesung(korea)

year;2011

cap' : 500?

 

13 textile machine

make:bianco(italy)

year;2011

opening & slitting line

roller width: 2,400m/m

fabric width: 2,200m/m

air pressure: 6bar

max.speed : 80m/min


  
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
  TEXTILE FINISH LINE AND DYEING LINE 1. ROLLING MACHINE MAKE:ROLL TECH(KOREA) YEAR:2011 RUBBER ROLLER : ?165×2,300?×3EA SPNGE ROLLER : ?165×2,300?×2EA 2 LARGE CENTRIFUGAL DEHYDRATOR MAKE:MANDUK(KOREA) YEAR:2011 BASKET SIZE : 1,520×1200(H)? BASKET CAP' : 500? MOTOR : 18.5? RPM : 0 - 700R.P.M 3 TURNING MACHINE MAKE:TOTAL(KOREA) YEAR:2011 TYPE : VERTICAL TURBO BLOWER -SPEED : 3,500RPM -POWER : 7.5? 4 CCK-? SYSTEM MAKE:DAERIM(KOREA) YEAR:2011 (COMPUTER COLOR KITCHEN)SYSTEM (1)HARDWARE MODEL:COLOR FOCUS-?(DLF-124) 124DYES TYPE (1000CC×24EA,500CC×100EA) (2)SOFTWARE (3)STOCK SOLUTION MAKER MODEL:DYE FOCUS-?(DLF-071) STORAGE TANK : 5L(HOT WATER), 5L(COLD WATER) 5 IR DYEING MACHINE X 2SETS MAKE:DAERIM(KOREA) YEAR:2011 TYPE: INFRARED DYE MODEL:DL-6000(STARLET-3) STANDARD ITEMS:24HANGING 50CC-23EA,SENSOR POT-1EA TEMP.:25~140? COOLING :FAN AIR CIRCULATION RPM:0~60RPM/MIN 6 WATER BATH SHAKER MAKE:DAERIM(KOREA) YEAR:2011 FLASK HOLDER:250?×60EA-2BATH TEMPERATURE RANGE:25~100? RECIPROCATING SPEED:25~150RPM/MIN SPEED CONTROLLER:1SET 7 WATER SETTING MACHINE MAKE: B.H(KOREA) YEAR:2011 8 TURN TABLEX 4SETS MAKE: B.H(KOREA) YEAR:2011 PLATE: 9T×?2,180? 9T×?2,300? 9 DYEING MACHINE MAKE: B.H(KOREA) YEAR:2011 CAP':400? MAX.TEMP:140? MAX.PRESS:4?/? 10 AUTOMATIC PACKING MACHINE MAKE:HYOSAN(KOREA) YEAR;2011 W)BELT CONVEYOR: 500(W)×3,000(L)? 11 SUN-SUPER S. TENTER MAKE:ILSUNG(KOREA) YEAR;2011 CHMABER : 8 C/B WORKING WIDTH : 2300? SPEED : 120M/MIN 12 HIGH PRESSURE DYEING MACHINE MAKE:DAESUNG(KOREA) YEAR;2011 CAP' : 500? 13 TEXTILE MACHINE MAKE:BIANCO(ITALY) YEAR;2011 OPENING & SLITTING LINE ROLLER WIDTH: 2,400M/M FABRIC WIDTH: 2,200M/M AIR PRESSURE: 6BAR MAX.SPEED : 80M/MIN BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 11.800 €
Ubicación: Land-: 3.010 x 27 x 0,9 mm<br/>: 835 mm<br/>: 3.220 x 1950 x 1900 mm<br/>: 2.400 x 1.700 x 1.700 mm<br/>: 1.090 kg<br/>hydraulic, fully automatic bandsaw <br/> <br/>automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp <br/>automatic feed 600 mm/stroke,<br/>adjustment by handwheel, counter and limitswitch<br/>variable cutting pressure. <br/>machine with 2 cutting speeds <br/>cutting fluid system <br/>automatic saw blade breakage detection <br/>quick clamping vice <br/>length stop 0-500 mm and material chute <br/>user manual in german <br/><br/><br/>alternative:<br/><br/>modell 330 ae 60° cnc euro  14.350,--<br/>as above model, but material feed and <br/>number of pieces by cnc<br/><br/>cutting capacity 90°: round 260 mm, square 240 mm, rectangular 330 x 120 mm<br/>cutting capacity 45°: round 200 mm, square 190 mm, rectangular 200 x 130 mm<br/>cutting capacity 60°: round 120 mm, square 115 mm, rectangular 120 x 100 mm<br/>cutting speed: 35/70 m/min<br/>motor: 0,9/1,5 kw<br/>band dimension: 3.010 x 27 x 0,9 mm<br/>working height: 835 mm<br/>measurements: length: 3.220 x 1950 x 1900 mm<br/>transport measurements: width: 2.400 x 1.700 x 1.700 mm<br/>weight: 1.090 kg<br/><br/><br/><br/> : 3.010 X 27 X 0,9 MM
: 835 MM
: 3.220 X 1950 X 1900 MM
: 2.400 X 1.700 X 1.700 MM
: 1.090 KG
HYDRAULIC, FULLY AUTOMATIC BANDSAW

AUTOMATIC CUTTING CYCLE CLAMPING, SAW BLADE AND CUTTING FLUID ON, CUTTING OPERATION, SAW BLADE AND CUTTING FLUID OFF, FAST RETURN STROKE, DECLAMP
AUTOMATIC FEED 600 MM/STROKE,
ADJUSTMENT BY HANDWHEEL, COUNTER AND LIMITSWITCH
VARIABLE CUTTING PRESSURE.
MACHINE WITH 2 CUTTING SPEEDS
CUTTING FLUID SYSTEM
AUTOMATIC SAW BLADE BREAKAGE DETECTION
QUICK CLAMPING VICE
LENGTH STOP 0-500 MM AND MATERIAL CHUTE
USER MANUAL IN GERMAN


ALTERNATIVE:

MODELL 330 AE 60° CNC EURO  14.350,--
AS ABOVE MODEL, BUT MATERIAL FEED AND
NUMBER OF PIECES BY CNC

CUTTING CAPACITY 90°: ROUND 260 MM, SQUARE 240 MM, RECTANGULAR 330 X 120 MM
CUTTING CAPACITY 45°: ROUND 200 MM, SQUARE 190 MM, RECTANGULAR 200 X 130 MM
CUTTING CAPACITY 60°: ROUND 120 MM, SQUARE 115 MM, RECTANGULAR 120 X 100 MM
CUTTING SPEED: 35/70 M/MIN
MOTOR: 0,9/1,5 KW
BAND DIMENSION: 3.010 X 27 X 0,9 MM
WORKING HEIGHT: 835 MM
MEASUREMENTS: LENGTH: 3.220 X 1950 X 1900 MM
TRANSPORT MEASUREMENTS: WIDTH: 2.400 X 1.700 X 1.700 MM
WEIGHT: 1.090 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-textile finish line and dyeing line

 

1. rolling machine

make:roll tech(korea)

year:2011

 rubber roller : ?165×2,300?×3ea

spnge roller : ?165×2,300?×2ea

 

2 large centrifugal dehydrator

make:manduk(korea)

year:2011

basket size : 1,520×1200(h)?

basket cap' : 500?

motor : 18.5?

rpm : 0 - 700r.p.m

 

3 turning machine

make:total(korea)

year:2011

type : vertical

turbo blower

 -speed : 3,500rpm

 -power : 7.5?

 

4 cck-? system

make:daerim(korea)

year:2011

(computer color kitchen)system

 (1)hardware

 model:color focus-?(dlf-124)

 124dyes type (1000cc×24ea,500cc×100ea)

(2)software

(3)stock solution maker

model:dye focus-?(dlf-071)

storage tank : 5l(hot water),

            5l(cold water)

5 ir dyeing machine x 2sets

make:daerim(korea)

year:2011

type: infrared dye

model:dl-6000(starlet-3)

standard items:24hanging

50cc-23ea,sensor pot-1ea

temp.:25~140?

cooling :fan air circulation

rpm:0~60rpm/min

 

6 water bath shaker

 make:daerim(korea)

year:2011

flask holder:250?×60ea-2bath

temperature range:25~100?

reciprocating speed:25~150rpm/min

speed controller:1set

7 water setting machine

make: b.h(korea)

year:2011

 

8 turn tablex 4sets

make: b.h(korea)

year:2011

plate: 9t×?2,180?

      9t×?2,300?

 

9 dyeing machine

make: b.h(korea)

year:2011

cap':400?

max.temp:140?

max.press:4?/?

 

10 automatic packing machine

make:hyosan(korea)

year;2011

w)belt conveyor:  500(w)×3,000(l)?

 

11 sun-super s. tenter

make:ilsung(korea)

year;2011

chmaber : 8 c/b

working width : 2300?

speed : 120m/min

 

12 high pressure dyeing machine

make:daesung(korea)

year;2011

cap' : 500?

 

13 textile machine

make:bianco(italy)

year;2011

opening & slitting line

roller width: 2,400m/m

fabric width: 2,200m/m

air pressure: 6bar

max.speed : 80m/min

 TEXTILE FINISH LINE AND DYEING LINE 1. ROLLING MACHINE MAKE:ROLL TECH(KOREA) YEAR:2011 RUBBER ROLLER : ?165×2,300?×3EA SPNGE ROLLER : ?165×2,300?×2EA 2 LARGE CENTRIFUGAL DEHYDRATOR MAKE:MANDUK(KOREA) YEAR:2011 BASKET SIZE : 1,520×1200(H)? BASKET CAP' : 500? MOTOR : 18.5? RPM : 0 - 700R.P.M 3 TURNING MACHINE MAKE:TOTAL(KOREA) YEAR:2011 TYPE : VERTICAL TURBO BLOWER -SPEED : 3,500RPM -POWER : 7.5? 4 CCK-? SYSTEM MAKE:DAERIM(KOREA) YEAR:2011 (COMPUTER COLOR KITCHEN)SYSTEM (1)HARDWARE MODEL:COLOR FOCUS-?(DLF-124) 124DYES TYPE (1000CC×24EA,500CC×100EA) (2)SOFTWARE (3)STOCK SOLUTION MAKER MODEL:DYE FOCUS-?(DLF-071) STORAGE TANK : 5L(HOT WATER), 5L(COLD WATER) 5 IR DYEING MACHINE X 2SETS MAKE:DAERIM(KOREA) YEAR:2011 TYPE: INFRARED DYE MODEL:DL-6000(STARLET-3) STANDARD ITEMS:24HANGING 50CC-23EA,SENSOR POT-1EA TEMP.:25~140? COOLING :FAN AIR CIRCULATION RPM:0~60RPM/MIN 6 WATER BATH SHAKER MAKE:DAERIM(KOREA) YEAR:2011 FLASK HOLDER:250?×60EA-2BATH TEMPERATURE RANGE:25~100? RECIPROCATING SPEED:25~150RPM/MIN SPEED CONTROLLER:1SET 7 WATER SETTING MACHINE MAKE: B.H(KOREA) YEAR:2011 8 TURN TABLEX 4SETS MAKE: B.H(KOREA) YEAR:2011 PLATE: 9T×?2,180? 9T×?2,300? 9 DYEING MACHINE MAKE: B.H(KOREA) YEAR:2011 CAP':400? MAX.TEMP:140? MAX.PRESS:4?/? 10 AUTOMATIC PACKING MACHINE MAKE:HYOSAN(KOREA) YEAR;2011 W)BELT CONVEYOR: 500(W)×3,000(L)? 11 SUN-SUPER S. TENTER MAKE:ILSUNG(KOREA) YEAR;2011 CHMABER : 8 C/B WORKING WIDTH : 2300? SPEED : 120M/MIN 12 HIGH PRESSURE DYEING MACHINE MAKE:DAESUNG(KOREA) YEAR;2011 CAP' : 500? 13 TEXTILE MACHINE MAKE:BIANCO(ITALY) YEAR;2011 OPENING & SLITTING LINE ROLLER WIDTH: 2,400M/M FABRIC WIDTH: 2,200M/M AIR PRESSURE: 6BAR MAX.SPEED : 80M/MIN
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 59 €
Ubicación: Land-: 3.010 x 27 x 0,9 mm<br/>sawingbands for bandsaw 330ae60°<br/><br/>suitable for stainless steel / high alloy steel<br/><br/>price per pce.<br/>minimum purchase 5 pcs.<br/><br/>dimensions: 3.010 x 27 x 0,9 mm<br/><br/><br/><br/> : 3.010 X 27 X 0,9 MM
SAWINGBANDS FOR BANDSAW 330AE60°

SUITABLE FOR STAINLESS STEEL / HIGH ALLOY STEEL

PRICE PER PCE.
MINIMUM PURCHASE 5 PCS.

DIMENSIONS: 3.010 X 27 X 0,9 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-
polyester fabric dyeing and printing equipment



3. tenter

make:myungsin(korea)

year:2003

width:2000mm

8-chamber

4. tenter

make:ilsung(korea)

year:1999

width:2,000mm

8-chamber

5. semi decutter

make:chungjin(korea)

year:2001

roll width:2,500mm

working width:1500mm

8. setting machine

make:bumhan(korea)

year:2003

bhl-2002 '

1-nozzle type

?1,000

control box

9. textile m/c

make:bianco

year:2002

roller width:2,400×1,200mm

11. continuous heater

make:daeyang(korea)

year:2001

16. rotary textile printing machine

make:daeyang(korea)

year:2004
12color

2)dryer


17. washing m/c

make:sinwoo(korea)

year:2004
3500l×2400w×2400hmm
18. boiler

make:sinpoong(korea)

year:2003
19. auto screen printing machine

make:daehyun(korea)

year:2007

13colors

13 colors

printing unit: 13units


20. auto screen printing machine

make:daehyun(korea)

year:2007

13colors

model: dhp-2900t

interlock type

w60 POLYESTER FABRIC DYEING AND PRINTING EQUIPMENT 3. TENTER MAKE:MYUNGSIN(KOREA) YEAR:2003 WIDTH:2000MM 8-CHAMBER 4. TENTER MAKE:ILSUNG(KOREA) YEAR:1999 WIDTH:2,000MM 8-CHAMBER 5. SEMI DECUTTER MAKE:CHUNGJIN(KOREA) YEAR:2001 ROLL WIDTH:2,500MM WORKING WIDTH:1500MM 8. SETTING MACHINE MAKE:BUMHAN(KOREA) YEAR:2003 BHL-2002 ' 1-NOZZLE TYPE ?1,000 CONTROL BOX 9. TEXTILE M/C MAKE:BIANCO YEAR:2002 ROLLER WIDTH:2,400×1,200MM 11. CONTINUOUS HEATER MAKE:DAEYANG(KOREA) YEAR:2001 16. ROTARY TEXTILE PRINTING MACHINE MAKE:DAEYANG(KOREA) YEAR:2004 12COLOR 2)DRYER 17. WASHING M/C MAKE:SINWOO(KOREA) YEAR:2004 3500L×2400W×2400HMM 18. BOILER MAKE:SINPOONG(KOREA) YEAR:2003 19. AUTO SCREEN PRINTING MACHINE MAKE:DAEHYUN(KOREA) YEAR:2007 13COLORS 13 COLORS PRINTING UNIT: 13UNITS 20. AUTO SCREEN PRINTING MACHINE MAKE:DAEHYUN(KOREA) YEAR:2007 13COLORS MODEL: DHP-2900T INTERLOCK TYPE W60" * R24" * 13COLORS 13 COLORS PRINTING UNIT: 13UNITS ( 22, AUTOMATIC SCREEN ENGRAVING M/C MAKE:ICHINOSE(JAPAN) YEAR:2000 23. DIGITAL NON FILM AUTOMATIC ENGRAVER MAKE:DS(KOREAN) YEAR:2008 25. DIGITAL NON FILM AUTOMATIC ENGRAVER MAKE:DS(KOREAN) YEAR:2008 26-1 SHEARING MACHINE MAKE:HYUNIL(KOREAN) YEAR:2008 26-2 SHEARING MACHINE MAKE:HYUNIL(KOREAN) YEAR:2008 26-3 SHEARING MACHINE MAKE:HYUNIL(KOREAN) YEAR:2008 26-4 EXPOSURE MAKE:HYUNIL(KOREAN) YEAR:2008 27.AUTOMATIC PACKING MACHINE MAKE:HYOSUNG(KOREAN) YEAR:2008 28. SAMPLE PRINTING MACHINE MAKE:HANWOONG(KOREAN) YEAR:2008 60"(1500MM) 29. SAMPLE PRINTING MACHINE MAKE:HANWOONG(KOREAN) YEAR:2008 60"(1500MM) 30. FOIL STAMPING MACHINE: MAKE:HAN(KOREAN) YEAR:2008 MAIN FRAME: 750*2250*3000MM HEATING ROLL: ?315*3000MM SILICON ROLL: ?300*3000MM HEATER: 2.5KW*6EA 31. TEST ROLLING MACHINE X4SETS MAKE:ROLL TECH(KOREAN) YEAR:2008 70" 32. TEST ROLLING MACHINE MAKE:ROLL TECH(KOREAN) YEAR:2008 80" 33. TEST ROLLING MACHINE MAKE:ROLL TECH(KOREAN YEAR:2008 100" 34 TEST ROLLING MACHINE X2 MAKE:ROLL TECH(KOREAN) YEAR:2008 80" 35. TEST ROLLING MACHINE MAKE:ROLL TECH(KOREAN) YEAR:2008 100" 36. CONTINUOUS TEST HEATER MAKE:CSM TECH(KOREAN) YEAR:2008 37.SAMPLE DIE MAKE:HANWOONG(KOREAN) YEAR:2008 38 SAMPLE DIE X2 MAKE:HANWOONG(KOREAN) YEAR:2008 60" * 18ML 39. WINDING MACHINE X3 MAKE:HANWOONG(KOREAN) YEAR:2008 MODEL: SD-2FLY 40. AUTO SCREEN PRINTING MACHINE MAKE:DAEHYUN(KOREAN) YEAR:2008 10 COLORS TABLE: 13 TABLE 41 BOILER X 1UNIT MAKE:HANKOOK(KOREAN) YEAR:2008 42. TENTER MAKE:IHWA(KOREAN) YEAR:2008 NAME: PLATINUM(ZIF-ZAG TYPE) WIDTH: 2200MM 44 CONTINUOUS CLEANER MAKE:SEOMKWANG(KOREAN) YEAR:2010 HEATING SOURCE 45. ELECTRIC HEATER MAKE:U&I(KOREAN) YEAR:2010 46. HIGH PRESSURE DYEING MACHINE MAKE:YU(KOREAN) YEAR:2011 CAP': 500KG 47. DYEING MACHINE MAKE:BH(KOREAN) YEAR:2009 VERTICAL TYPE CAP': 600KG 49. ELECTRIC TYPE FABRIC HEAT TREATMENT MAKE:U&I(KOREA) YEAR:2011 50. ELECTRIC TYPE FABRIC HEAT TREATMENT MAKE:U&I(KOREA) YEAR:2011 VERTICAL TYPE) MODEL: BH-P-200 CAP': 200KG 51. DYEING MACHINE X2 MAKE:YU(KOREA) YEAR:2011 CAP': 400KG CONTROLLER 52. WATER PRINTER& FABRIC INPUT EQUIPMENT X2 MAKE:MUTOH(JAPAN) YEAR:2011 BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 7.600 €
Ubicación: Land-: 3.120 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.650 x 1.200 x 1.850 mm<br/>: 1.450 x 800 x 1.450 mm<br/>: 390 kg<br/>hydraulic vice<br/>saw beam moves up and down by hydraulic cylinder<br/>fast descent<br/>automatic fast up/down conrolled by feeler pin<br/>adjustable pressure according to section and type of material<br/>double safety buton for cycle start<br/>2 speeds<br/>coolant equipment<br/><br/>cutting cycle<br/>vice locking, quick bow pull-down hydraulically operated, blade rotation and cooling liquid start-up, <br/>working pull-down, end of the cutting cycle, stop of blade rotation and supply of cooling liquid, <br/>quick bow lift-up, stop of bow upwards movement, vice unlocking if selected.<br/><br/><br/>optional equipmente: adjustable vice pressure     eur 310,--<br/><br/><br/>cutting capacity:<br/>90°: round 280 mm, square 240 mm, rectangular 370 x 140 mm<br/>45°: round 225 mm, square 215 mm, rectangular 230 x 140 mm<br/>60°: round 140 mm, square 140 mm, rectangular 140 x 130 mm<br/>blade dimension: 3.120 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>fast descent: 3.500 mm/min<br/>working descent: 0-200 mm/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.650 x 1.200 x 1.850 mm<br/>transport measurements: 1.450 x 800 x 1.450 mm<br/>weight: 390 kg<br/><br/><br/><br/> : 3.120 X 27 X 0,9 MM
: 830 MM
: 1.650 X 1.200 X 1.850 MM
: 1.450 X 800 X 1.450 MM
: 390 KG
HYDRAULIC VICE
SAW BEAM MOVES UP AND DOWN BY HYDRAULIC CYLINDER
FAST DESCENT
AUTOMATIC FAST UP/DOWN CONROLLED BY FEELER PIN
ADJUSTABLE PRESSURE ACCORDING TO SECTION AND TYPE OF MATERIAL
DOUBLE SAFETY BUTON FOR CYCLE START
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CYCLE
VICE LOCKING, QUICK BOW PULL-DOWN HYDRAULICALLY OPERATED, BLADE ROTATION AND COOLING LIQUID START-UP,
WORKING PULL-DOWN, END OF THE CUTTING CYCLE, STOP OF BLADE ROTATION AND SUPPLY OF COOLING LIQUID,
QUICK BOW LIFT-UP, STOP OF BOW UPWARDS MOVEMENT, VICE UNLOCKING IF SELECTED.


OPTIONAL EQUIPMENTE: ADJUSTABLE VICE PRESSURE     EUR 310,--


CUTTING CAPACITY:
90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 370 X 140 MM
45°: ROUND 225 MM, SQUARE 215 MM, RECTANGULAR 230 X 140 MM
60°: ROUND 140 MM, SQUARE 140 MM, RECTANGULAR 140 X 130 MM
BLADE DIMENSION: 3.120 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
FAST DESCENT: 3.500 MM/MIN
WORKING DESCENT: 0-200 MM/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.650 X 1.200 X 1.850 MM
TRANSPORT MEASUREMENTS: 1.450 X 800 X 1.450 MM
WEIGHT: 390 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-
major textile knitting  plant liquidation 
(please your intrest with confirmed target price immedaitely)

 
 
knitting
12
monarch fil 8aeq, 30 MAJOR TEXTILE KNITTING PLANT LIQUIDATION (PLEASE YOUR INTREST WITH CONFIRMED TARGET PRICE IMMEDAITELY) KNITTING 12 MONARCH FIL 8AEQ, 30", 4-18 CUT, 8-24 CUT, 84 FEED 2 MONARCH FIL 8AEQ, 30", 18 CUT, 84 FEED, 50 % LYCRA 10 MONARCH FIM 108A, 30", 24 CUT, 108 FEED 1 MONARCH FDR RIB, 26", 14 CUT, 52 FEED 3 MONARCH RIB, 26", 14 CUT, 52 FEED, LYCRA 1 MONARCH RIB, 20", 14 CUT, 40 FEED 1 MONARCH SEC ELECTRONIC STRIPER, 30", 16 CUT, 36 FEED 6 MONARCH FXC4S, 30', 20 CUT, 122 FEED 4 MONARCH RACE, 30", 28 CUT, 122 CUT 1 MONARCH STEP JACK, 30", 20 CUT, 72 FEED 14 MONARCH RXDF, 30", 122 FEED, 3-24 CUT, 6-22 CUT, 5-18 CUT, 24 MONARCH RX4S, 26", 104 FD, 2-28 CUT, 4-24 CUT, 9-18 CUT, 9-22 CUT, 7 MONARCH FXC 4S, 26", 20 CUT, 104 FD. 6 MONARCH RX4S, 26", 20 CUT, 104 FD. 8 MONARCH RX WSY STRIPER, 30", 48 FEED, 5-16 CUT, 1-18 CUT, 1-28 CUT FLAT KNITTING 2 PROTTI PV94 DOUBLELOCK, 240 CM, 12 GAUGE 6 PROTTI PT222, 213 CM, 12 CUT 9 PROTTI PT242 JACQUARD, 218 CM, 12 CUT 35 STOLL JBOMB, 150 CM, 160 CM & 180 CM, 12 GAUGE DYEING 1 GASTON JET DYE, 80 LB., 1996, M6000 CONTROLLER 4 SCLAVOS JET DYE, VENUS HT3, 3 PORT, 1000 LBS., 50 PSI, 1999, UPDATED RECORE CONTROLS, 2014-15 3 GASTON FUTURA, 2 PORT, 1000 LBS., 53 PSI, BARCO CONTROLS, 1987 1 GASTON FUTURA JET DYE, SINGLE TUBE, 160 LBS,, 1992, M3000 CONTROLLER 4 RECORE DYE MACHINE CONTROLLERS, 2012-14 6 THEN AIRFLOW, 1200 LBS., 3 STRAND/3 PORTS, 1988 1 THEN AIRFLOW, 400 LBS., 1 PORT, 1987 3 ARGANTHAN JET DYE, 80 LBS. EACH, 60 PSI, 1982-80 1 ARGANTHAN JET DYE, 400 LBS., 60 PSI, 1982 11 ARGANTHAN JET DYE, 4 PORTS, 1000 LBS., 60 PSI, 1980 7 GASTON 824 JET DYE, 5-3 PORT, 2-2 PORT 200 STAINLESS MIXING TANKS WITH MIXERS, 50 TO 250 GAL. 200 DYEHOUSE TRUCKS, 72" X 42" WIDE X 35" DP. FINISHING 1 SANTEX SANTASTRECH PLUS 120, 48" WIDE, 120 CM, BALLOON EXTRACTOR, 5 TO 60 YPM, 1994 1 SANTEX SANTASHRINK DRYER, 220 CM WIDE, WITH PIN TENTER ENTRY, 1994, 6K/220 GAS IR SRS + SPR+FOUL+CUT, GAS FIRED, 6 CHAMBERS, 2400 LBS./HOUR EVAPORATION CAPACITY, 6.1 MIL BTU/HR 1 TUBETEX DRYER #6 GAS FIRED DRUM, ENTRY WITH 3- FABCON PADDERS 1 BIANCO SLITTER, 86" WIDE, BIANCO SLITTER HEAD (UPDATED 2015), ROPE SQUEEZE, DETWISTER, FOLDER, STAINLESS STEEL 1 BIANCO SLITTER, 86" WIDE, OPENER AND DETWISTER, 2 SCROLLED ROLLS, FLAT FOLDER 1 STENTEX TENTER STENTOTHERM 3300, 1995, 2400 MM MAX. WORKING WIDTH, UNWIND, J BOX, DOGAL UNCURLER, 2 SANTEX PADDERS, 102" WIDE, BIANCO WEFT STRAIGHTNER, E & L GUIDERS, LOW PROFILE GAS FIRED 12 ZONES, 1 KRANTZ SYNCRO SHRINK CONVEYOR DRYER, 100" WIDE BELT 2 FAMATEX TENTER #1 & #2 3 TUBE TEX DRUM DRYERS, 48" WIDE & 72" WIDE 1 FABCON DRUM DRYER, 8 ZONE 5 TUBULAR INSPECTION MACHINES 6 6 FABCON TUBULAR GULLWING TUBULAR COMPACTORS, 52" WIDE FABCON & TUBETEX TUBULAR CALENDARS, 50" & 60" WIDE 1 ARGATHEN BLEACH RANGE, 10 SECTION, 2200 LBS. HOUR. 1 JEMCO BLEACH RANGE, MODEL III 2000 CBR, 2,000 LBS. HOUR, 1995 1 CURTIS & MARBLE, PLASTIC ROLL WRAPPING 1 BESPOKE DYE MIXING SYSTEM, YEAR 2000, 16 PUMPS, 2 MODEL SRD EXACT WEIGH LIQUID CHEMICAL COLLECTING, MIXING, BATCH WEIGHING, 2 IR DUAL HEAD CENTRIFUGAL PUMP, METTLER INTERGRATED SCALE 1 TUBE TEX, DRUM DRYER 1999, WITH 3 TUBE TEX TUBULAR PADDERS 1 1 MONFORTS KNITGOODS TOPTEX 92" WIDE, OPEN WIDTH RUBBER BELT COMPACTOR, KOMBI BATCHER, STEAM HEATED MAIN CYLINDER, 1990 FABCON OPEN PIN TENTER, 90" WIDE X 20' LONG, STEAMING SECTION, BATCHER 1 LABORATORY: RAITECH QUICKWASH, DATACOLOR 500, MILNOR WASHER, HUEBSCH DRYER 50 LB., PLUS MANY MORE ITEMS 25 MERROW SEWING MACHINES, WITH TABLE AND MOTOR 2 GARDNER DENVER AIR COMPRESSOR, 60 HP 1 GARDNER DENVER AIR COMPRESSOR, 200 HP 3 INGERSOLL-RAND SCREW COMPRESSOR, 2- 250 HP, 1-150 HP 3 PROPANE STORAGE TANKS, 30,000 GALLON, WITH MIXER 4 STAINLESS STEEL OUTSIDE TANKS, 6000 GAL TO 10,000 GAL. 3 WASTE BALERS, VERTICAL STYLE 2 CLEAVER BROOKS PACKAGE BOILERS, 800 HP, 1988 + 1989, DEARATOR SYSTEM PLEASE CONTACT US FOR FURTHER INFORMATION .
Vendedor: American Traders
Año de construcción: usado
Precio: 5.850 €
Ubicación: Land-: 3.010 x 27 x 0,9 mm<br/>: 35/70 mm<br/>: 830 mm<br/>: 1.500 x 1.400 x 1.850 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 345 kg<br/>manual vice with lever for quick clamping<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 260 mm, square 240 mm, rectangular 330 x 120 mm<br/>45°: round 200 mm, square 190 mm, rectangular 200 x 130 mm<br/>60°: round 120 mm, square 115 mm, rectangular 120 x 100 mm<br/>blade dimension: 3.010 x 27 x 0,9 mm<br/>speed: 35/70 mm<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.500 x 1.400 x 1.850 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 345 kg<br/><br/><br/><br/> : 3.010 X 27 X 0,9 MM
: 35/70 MM
: 830 MM
: 1.500 X 1.400 X 1.850 MM
: 1.450 X 750 X 1.500 MM
: 345 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 260 MM, SQUARE 240 MM, RECTANGULAR 330 X 120 MM
45°: ROUND 200 MM, SQUARE 190 MM, RECTANGULAR 200 X 130 MM
60°: ROUND 120 MM, SQUARE 115 MM, RECTANGULAR 120 X 100 MM
BLADE DIMENSION: 3.010 X 27 X 0,9 MM
SPEED: 35/70 MM
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.500 X 1.400 X 1.850 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 345 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-corino and bianco slitter for tubular knits, model taglierina. year 1995 
roller width 2400 mm 
automatic detwister 
mtg thread collector 
exit by folder CORINO AND BIANCO SLITTER FOR TUBULAR KNITS, MODEL TAGLIERINA. YEAR 1995 ROLLER WIDTH 2400 MM AUTOMATIC DETWISTER MTG THREAD COLLECTOR EXIT BY FOLDER
Vendedor: Inautex
Año de construcción: usado
Precio: 6.100 €
Ubicación: Land-: 3.120 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.550 x 1.400 x 1.900 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 353 kg<br/>manual vice with lever for quick clamping<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 280 mm, square 240 mm, rectangular 370 x 140 mm<br/>45°: round 225 mm, square 215 mm, rectangular 230 x 140 mm<br/>60°: round 140 mm, square 140 mm, rectangular 140 x 130 mm<br/>blade dimension: 3.120 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.550 x 1.400 x 1.900 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 353 kg<br/><br/><br/><br/> : 3.120 X 27 X 0,9 MM
: 830 MM
: 1.550 X 1.400 X 1.900 MM
: 1.450 X 750 X 1.500 MM
: 353 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 370 X 140 MM
45°: ROUND 225 MM, SQUARE 215 MM, RECTANGULAR 230 X 140 MM
60°: ROUND 140 MM, SQUARE 140 MM, RECTANGULAR 140 X 130 MM
BLADE DIMENSION: 3.120 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.550 X 1.400 X 1.900 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 353 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-bianco weft straightener model tramatex sp04. year 2002
entrance with tension bars and bianco dogal spreader
cleaning box with brush cylinders and dust collector
bianco pin wheel weft straightener
with siemens touch screen programmer BIANCO WEFT STRAIGHTENER MODEL TRAMATEX SP04. YEAR 2002 ENTRANCE WITH TENSION BARS AND BIANCO DOGAL SPREADER CLEANING BOX WITH BRUSH CYLINDERS AND DUST COLLECTOR BIANCO PIN WHEEL WEFT STRAIGHTENER WITH SIEMENS TOUCH SCREEN PROGRAMMER
Vendedor: Inautex
Año de construcción: usado
Precio: 50 €
Ubicación: Land-: 3.010 x 27 x 0,9 mm<br/>sawingbands for bandsaw 330ae60°<br/><br/>suitable for mild steel / low alloy steel<br/><br/>price per pce.<br/>minimum purchase 5 pcs.<br/><br/>dimensions: 3.010 x 27 x 0,9 mm<br/><br/><br/><br/> : 3.010 X 27 X 0,9 MM
SAWINGBANDS FOR BANDSAW 330AE60°

SUITABLE FOR MILD STEEL / LOW ALLOY STEEL

PRICE PER PCE.
MINIMUM PURCHASE 5 PCS.

DIMENSIONS: 3.010 X 27 X 0,9 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-bianco weft straightener model tramatex sp04. year 1995
entrance with tension bars and bianco dogal spreader
cleaning box with brush cylinders and dust collector
bianco pin wheel weft straightener
 BIANCO WEFT STRAIGHTENER MODEL TRAMATEX SP04. YEAR 1995 ENTRANCE WITH TENSION BARS AND BIANCO DOGAL SPREADER CLEANING BOX WITH BRUSH CYLINDERS AND DUST COLLECTOR BIANCO PIN WHEEL WEFT STRAIGHTENER
Vendedor: Inautex
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-: 2.450 x 27 x 0,9 mm<br/>: 965 mm<br/>: 1.200 x 1.100 x 1.860 mm<br/>: 1.200 x 650 x 1.650 mm<br/>: 240 kg<br/>manual vice with lever for quick clamping<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 220 mm, square 220 mm, rectangular 260 x 140 mm<br/>45°: round 160 mm, square 155 mm, rectangular 160 x 140 mm<br/>60°: round 95 mm, square 95 mm, rectangular 95 x 95 mm<br/>blade dimension: 2.450 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 965 mm<br/>motor: 0,5/0,7 kw<br/>measurements: 1.200 x 1.100 x 1.860 mm<br/>transport measurements: 1.200 x 650 x 1.650 mm<br/>weight: 240 kg<br/><br/><br/><br/> : 2.450 X 27 X 0,9 MM
: 965 MM
: 1.200 X 1.100 X 1.860 MM
: 1.200 X 650 X 1.650 MM
: 240 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 220 MM, SQUARE 220 MM, RECTANGULAR 260 X 140 MM
45°: ROUND 160 MM, SQUARE 155 MM, RECTANGULAR 160 X 140 MM
60°: ROUND 95 MM, SQUARE 95 MM, RECTANGULAR 95 X 95 MM
BLADE DIMENSION: 2.450 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 965 MM
MOTOR: 0,5/0,7 KW
MEASUREMENTS: 1.200 X 1.100 X 1.860 MM
TRANSPORT MEASUREMENTS: 1.200 X 650 X 1.650 MM
WEIGHT: 240 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-starter rope bianco for the flat fabric. year 1992
entry with scarf in rope bianco
swivel
expansion and guider
output folder STARTER ROPE BIANCO FOR THE FLAT FABRIC. YEAR 1992 ENTRY WITH SCARF IN ROPE BIANCO SWIVEL EXPANSION AND GUIDER OUTPUT FOLDER
Vendedor: Inautex
Año de construcción: usado
Precio: 7.750 €
Ubicación: Land-: 3.270 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.600 x 1.400 x 1.800 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 438 kg<br/>manual vice with lever for quick clamping<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 280 mm, square 240 mm, rectangular 420 x 200 mm<br/>+ 45° right: round 260 mm, square 240 mm, rectangular 260 x 200 mm<br/>- 45° left: round 200 mm, square 180 mm, rectangular 250 x 100 mm<br/>+ 60° right: round 170 mm, square 160 mm, rectangular 160 x 160 mm<br/>blade dimension: 3.270 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.600 x 1.400 x 1.800 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 438 kg<br/><br/><br/><br/> : 3.270 X 27 X 0,9 MM
: 830 MM
: 1.600 X 1.400 X 1.800 MM
: 1.450 X 750 X 1.500 MM
: 438 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 420 X 200 MM
+ 45° RIGHT: ROUND 260 MM, SQUARE 240 MM, RECTANGULAR 260 X 200 MM
- 45° LEFT: ROUND 200 MM, SQUARE 180 MM, RECTANGULAR 250 X 100 MM
+ 60° RIGHT: ROUND 170 MM, SQUARE 160 MM, RECTANGULAR 160 X 160 MM
BLADE DIMENSION: 3.270 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.600 X 1.400 X 1.800 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 438 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 8.850 €
Ubicación: Land-: 3.120 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.600 x 1.550 x 1.750 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 460 kg<br/>hydraulic vice<br/>saw beam moves up and down by hydraulic cylinder<br/>fast descent<br/>automatic fast up/down conrolled by feeler pin<br/>adjustable pressure according to section and type of material<br/>double safety buton for cycle start<br/>2 speeds<br/>coolant equipment<br/><br/>cutting cycle<br/>vice locking, quick bow pull-down hydraulically operated, blade rotation and cooling liquid start-up, <br/>working pull-down, end of the cutting cycle, stop of blade rotation and supply of cooling liquid, <br/>quick bow lift-up, stop of bow upwards movement, vice unlocking if selected.<br/><br/><br/>cutting capacity:<br/>90°: round 280 mm, square 240 mm, rectangular 350 x 140 mm<br/>+ 45° right: round 230 mm, square 200 mm, rectangular 230 x 230 mm<br/>- 45° left: round 200 mm, square 170 mm, rectangular 220 x 100 mm<br/>60°: round 140 mm, square 140 mm, rectangular 140 x 140 mm<br/>blade dimension: 3.120 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>fast descent: 3.500 mm/min<br/>working descent: 0-200 mm/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.600 x 1.550 x 1.750 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 460 kg<br/><br/><br/><br/> : 3.120 X 27 X 0,9 MM
: 830 MM
: 1.600 X 1.550 X 1.750 MM
: 1.450 X 750 X 1.500 MM
: 460 KG
HYDRAULIC VICE
SAW BEAM MOVES UP AND DOWN BY HYDRAULIC CYLINDER
FAST DESCENT
AUTOMATIC FAST UP/DOWN CONROLLED BY FEELER PIN
ADJUSTABLE PRESSURE ACCORDING TO SECTION AND TYPE OF MATERIAL
DOUBLE SAFETY BUTON FOR CYCLE START
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CYCLE
VICE LOCKING, QUICK BOW PULL-DOWN HYDRAULICALLY OPERATED, BLADE ROTATION AND COOLING LIQUID START-UP,
WORKING PULL-DOWN, END OF THE CUTTING CYCLE, STOP OF BLADE ROTATION AND SUPPLY OF COOLING LIQUID,
QUICK BOW LIFT-UP, STOP OF BOW UPWARDS MOVEMENT, VICE UNLOCKING IF SELECTED.


CUTTING CAPACITY:
90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 350 X 140 MM
+ 45° RIGHT: ROUND 230 MM, SQUARE 200 MM, RECTANGULAR 230 X 230 MM
- 45° LEFT: ROUND 200 MM, SQUARE 170 MM, RECTANGULAR 220 X 100 MM
60°: ROUND 140 MM, SQUARE 140 MM, RECTANGULAR 140 X 140 MM
BLADE DIMENSION: 3.120 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
FAST DESCENT: 3.500 MM/MIN
WORKING DESCENT: 0-200 MM/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.600 X 1.550 X 1.750 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 460 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.350 €
Ubicación: Land-: 2.450 x 27 x 0,9 mm<br/>: 970 mm<br/>: 1.310 x 1.120 x 1.900 mm<br/>: 900 x 1.200 x 1.700 mm<br/>: 300 kg<br/>pneumatic vice<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 220 mm, square 210 mm, rectangular 200 x 200 mm<br/>+ 45° right: round 140 mm, square 140 mm, rectangular 140 x 140 mm<br/>- 45° left: round 140 mm, square 125 mm, rectangular 140 x 110 mm<br/>+ 60° right: round 100 mm, square 90 mm, rectangular 90 x 120 mm<br/>blade dimension: 2.450 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 970 mm<br/>motor: 0,5/0,7 kw<br/>measurements: 1.310 x 1.120 x 1.900 mm<br/>transport measurements: 900 x 1.200 x 1.700 mm<br/>weight: 300 kg<br/><br/><br/><br/> : 2.450 X 27 X 0,9 MM
: 970 MM
: 1.310 X 1.120 X 1.900 MM
: 900 X 1.200 X 1.700 MM
: 300 KG
PNEUMATIC VICE
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 220 MM, SQUARE 210 MM, RECTANGULAR 200 X 200 MM
+ 45° RIGHT: ROUND 140 MM, SQUARE 140 MM, RECTANGULAR 140 X 140 MM
- 45° LEFT: ROUND 140 MM, SQUARE 125 MM, RECTANGULAR 140 X 110 MM
+ 60° RIGHT: ROUND 100 MM, SQUARE 90 MM, RECTANGULAR 90 X 120 MM
BLADE DIMENSION: 2.450 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 970 MM
MOTOR: 0,5/0,7 KW
MEASUREMENTS: 1.310 X 1.120 X 1.900 MM
TRANSPORT MEASUREMENTS: 900 X 1.200 X 1.700 MM
WEIGHT: 300 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.450 €
Ubicación: Land-: 3.270 x 27 x 0,9 mm<br/>: 35/70 mm<br/>: 830 mm<br/>: 1.600 x 1.400 x 1.950 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 356 kg<br/>manual vice with lever for quick clamping<br/>gravity downfeed with adjustable damper<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°  round 300 mm,  square 240 mm, rectangular 420 x 200 mm<br/>45°  round 240 mm,  square 230 mm, rectangular 270 x 140 mm<br/>60°  round 170 mm,  square 170 mm, rectangular 170 x 170 mm<br/>blade dimension: 3.270 x 27 x 0,9 mm<br/>speed: 35/70 mm<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.600 x 1.400 x 1.950 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 356 kg<br/><br/><br/><br/> : 3.270 X 27 X 0,9 MM
: 35/70 MM
: 830 MM
: 1.600 X 1.400 X 1.950 MM
: 1.450 X 750 X 1.500 MM
: 356 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
GRAVITY DOWNFEED WITH ADJUSTABLE DAMPER
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90° ROUND 300 MM, SQUARE 240 MM, RECTANGULAR 420 X 200 MM
45° ROUND 240 MM, SQUARE 230 MM, RECTANGULAR 270 X 140 MM
60° ROUND 170 MM, SQUARE 170 MM, RECTANGULAR 170 X 170 MM
BLADE DIMENSION: 3.270 X 27 X 0,9 MM
SPEED: 35/70 MM
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.600 X 1.400 X 1.950 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 356 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 9.800 €
Ubicación: Land-: 3.270 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.600 x 1.600 x 1.800 mm<br/>: 1.450 x 750 x 1.500 mm<br/>: 470 kg<br/>hydraulic vice<br/>saw beam moves up and down by hydraulic cylinder<br/>fast descent<br/>automatic fast up/down conrolled by feeler pin<br/>adjustable pressure according to section and type of material<br/>double safety buton for cycle start<br/>2 speeds<br/>coolant equipment<br/><br/>cutting cycle<br/>vice locking, quick bow pull-down hydraulically operated, blade rotation and cooling liquid start-up, <br/>working pull-down, end of the cutting cycle, stop of blade rotation and supply of cooling liquid, <br/>quick bow lift-up, stop of bow upwards movement, vice unlocking if selected.<br/><br/><br/>cutting capacity:<br/>90°: round 280 mm, square 240 mm, rectangular 420 x 200 mm<br/>+ 45° right: round 260 mm, square 240 mm, rectangular 260 x 200 mm<br/>- 45° left: round 200 mm, square 180 mm, rectangular 250 x 100 mm<br/>60°: round 170 mm, square 160 mm, rectangular 160 x 160 mm<br/>blade dimension: 3.270 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>fast descent: 3.500 mm/min<br/>working descent: 0-200 mm/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.600 x 1.600 x 1.800 mm<br/>transport measurements: 1.450 x 750 x 1.500 mm<br/>weight: 470 kg<br/><br/><br/><br/> : 3.270 X 27 X 0,9 MM
: 830 MM
: 1.600 X 1.600 X 1.800 MM
: 1.450 X 750 X 1.500 MM
: 470 KG
HYDRAULIC VICE
SAW BEAM MOVES UP AND DOWN BY HYDRAULIC CYLINDER
FAST DESCENT
AUTOMATIC FAST UP/DOWN CONROLLED BY FEELER PIN
ADJUSTABLE PRESSURE ACCORDING TO SECTION AND TYPE OF MATERIAL
DOUBLE SAFETY BUTON FOR CYCLE START
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CYCLE
VICE LOCKING, QUICK BOW PULL-DOWN HYDRAULICALLY OPERATED, BLADE ROTATION AND COOLING LIQUID START-UP,
WORKING PULL-DOWN, END OF THE CUTTING CYCLE, STOP OF BLADE ROTATION AND SUPPLY OF COOLING LIQUID,
QUICK BOW LIFT-UP, STOP OF BOW UPWARDS MOVEMENT, VICE UNLOCKING IF SELECTED.


CUTTING CAPACITY:
90°: ROUND 280 MM, SQUARE 240 MM, RECTANGULAR 420 X 200 MM
+ 45° RIGHT: ROUND 260 MM, SQUARE 240 MM, RECTANGULAR 260 X 200 MM
- 45° LEFT: ROUND 200 MM, SQUARE 180 MM, RECTANGULAR 250 X 100 MM
60°: ROUND 170 MM, SQUARE 160 MM, RECTANGULAR 160 X 160 MM
BLADE DIMENSION: 3.270 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
FAST DESCENT: 3.500 MM/MIN
WORKING DESCENT: 0-200 MM/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.600 X 1.600 X 1.800 MM
TRANSPORT MEASUREMENTS: 1.450 X 750 X 1.500 MM
WEIGHT: 470 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 3.050 €
Ubicación: Land-: 2.450 x 20 x 0,9 mm<br/>: 935 mm<br/>: 1.200 x 1.100 x 1.800 mm<br/>: 1.200 x 750 x 1.550 mm<br/>: 202 kg<br/>manual vice with lever for quick clamping<br/>2 speeds<br/>coolant equipment<br/><br/>cutting capacity:<br/>90°: round 200 mm, square 170 mm, rectangular 200 x 170 mm<br/>45°: round 130 mm, square 130 mm, rectangular 130 x 180 mm<br/>60°: round 70 mm, square 70 mm, rectangular 70 x 70 mm<br/>blade dimension: 2.450 x 20 x 0,9 mm<br/>speed: 40/80 m/min<br/>working height: 935 mm<br/>motor: 0,37/0,75 kw<br/>measurements: 1.200 x 1.100 x 1.800 mm<br/>transport measurements: 1.200 x 750 x 1.550 mm<br/>weight: 202 kg<br/><br/><br/><br/> : 2.450 X 20 X 0,9 MM
: 935 MM
: 1.200 X 1.100 X 1.800 MM
: 1.200 X 750 X 1.550 MM
: 202 KG
MANUAL VICE WITH LEVER FOR QUICK CLAMPING
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CAPACITY:
90°: ROUND 200 MM, SQUARE 170 MM, RECTANGULAR 200 X 170 MM
45°: ROUND 130 MM, SQUARE 130 MM, RECTANGULAR 130 X 180 MM
60°: ROUND 70 MM, SQUARE 70 MM, RECTANGULAR 70 X 70 MM
BLADE DIMENSION: 2.450 X 20 X 0,9 MM
SPEED: 40/80 M/MIN
WORKING HEIGHT: 935 MM
MOTOR: 0,37/0,75 KW
MEASUREMENTS: 1.200 X 1.100 X 1.800 MM
TRANSPORT MEASUREMENTS: 1.200 X 750 X 1.550 MM
WEIGHT: 202 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 7.250 €
Ubicación: Land-: 3.010 x 27 x 0,9 mm<br/>: 830 mm<br/>: 1.600 x 1.200 x 1.800 mm<br/>: 1.450 x 800 x 1.450 mm<br/>: 390 kg<br/>hydraulic vice<br/>saw beam moves up and down by hydraulic cylinder<br/>fast descent<br/>automatic fast up/down conrolled by feeler pin<br/>adjustable pressure according to section and type of material<br/>double safety buton for cycle start<br/>2 speeds<br/>coolant equipment<br/><br/>cutting cycle<br/>vice locking, quick bow pull-down hydraulically operated, blade rotation and cooling liquid start-up, <br/>working pull-down, end of the cutting cycle, stop of blade rotation and supply of cooling liquid, <br/>quick bow lift-up, stop of bow upwards movement, vice unlocking if selected.<br/><br/><br/>optional equipmente: adjustable vice pressure     eur 310,--<br/><br/><br/>cutting capacity:<br/>90°: round 260 mm, square 240 mm, rectangular 330 x 120 mm<br/>45°: round 200 mm, square 190 mm, rectangular 200 x 130 mm<br/>60°: round 120 mm, square 115 mm, rectangular 120 x 100 mm<br/>blade dimension: 3.010 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>fast descent: 3.500 mm/min<br/>working descent: 0-200 mm/min<br/>working height: 830 mm<br/>motor: 0,9/1,5 kw<br/>measurements: 1.600 x 1.200 x 1.800 mm<br/>transport measurements: 1.450 x 800 x 1.450 mm<br/>weight: 390 kg<br/><br/><br/><br/> : 3.010 X 27 X 0,9 MM
: 830 MM
: 1.600 X 1.200 X 1.800 MM
: 1.450 X 800 X 1.450 MM
: 390 KG
HYDRAULIC VICE
SAW BEAM MOVES UP AND DOWN BY HYDRAULIC CYLINDER
FAST DESCENT
AUTOMATIC FAST UP/DOWN CONROLLED BY FEELER PIN
ADJUSTABLE PRESSURE ACCORDING TO SECTION AND TYPE OF MATERIAL
DOUBLE SAFETY BUTON FOR CYCLE START
2 SPEEDS
COOLANT EQUIPMENT

CUTTING CYCLE
VICE LOCKING, QUICK BOW PULL-DOWN HYDRAULICALLY OPERATED, BLADE ROTATION AND COOLING LIQUID START-UP,
WORKING PULL-DOWN, END OF THE CUTTING CYCLE, STOP OF BLADE ROTATION AND SUPPLY OF COOLING LIQUID,
QUICK BOW LIFT-UP, STOP OF BOW UPWARDS MOVEMENT, VICE UNLOCKING IF SELECTED.


OPTIONAL EQUIPMENTE: ADJUSTABLE VICE PRESSURE     EUR 310,--


CUTTING CAPACITY:
90°: ROUND 260 MM, SQUARE 240 MM, RECTANGULAR 330 X 120 MM
45°: ROUND 200 MM, SQUARE 190 MM, RECTANGULAR 200 X 130 MM
60°: ROUND 120 MM, SQUARE 115 MM, RECTANGULAR 120 X 100 MM
BLADE DIMENSION: 3.010 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
FAST DESCENT: 3.500 MM/MIN
WORKING DESCENT: 0-200 MM/MIN
WORKING HEIGHT: 830 MM
MOTOR: 0,9/1,5 KW
MEASUREMENTS: 1.600 X 1.200 X 1.800 MM
TRANSPORT MEASUREMENTS: 1.450 X 800 X 1.450 MM
WEIGHT: 390 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.550 €
Ubicación: Land-: 2.450 x 27 x 0,9 mm<br/>: 800 mm<br/>: 1.330 x 1.300 x 1.880 mm<br/>: 1.300 x 800 x 1.450 mm<br/>: 350 kg<br/>hydraulic vice<br/>saw beam moves up and down by hydraulic cylinder<br/>fast descent<br/>utomatic fast up/down conrolled by feeler pin<br/>adjustable pressure according to section and type of material<br/>double safety buton for cycle start<br/>2 speeds<br/>coolant equipment<br/><br/><br/>cutting cycle<br/>vice locking, quick bow pull-down hydraulically operated, blade rotation and cooling liquid start-up, <br/>working pull-down, end of the cutting cycle, stop of blade rotation and supply of cooling liquid, <br/>quick bow lift-up, stop of bow upwards movement, vice unlocking if selected.<br/><br/><br/>optional equipment: adjustable vice pressure     eur 310,--<br/><br/><br/>cutting capacity:<br/>90°: round 220 mm, square 200 mm, rectangular 250 x 150 mm<br/>45°: round 160 mm, square 140 mm, rectangular 140 x 140 mm<br/>60°: round 90 mm, square 90 mm, rectangular 90 x 90 mm<br/>blade dimension: 2.450 x 27 x 0,9 mm<br/>speed: 35/70 m/min<br/>working height: 800 mm<br/>motor: 0,5/0,7 kw<br/>measurements: 1.330 x 1.300 x 1.880 mm<br/>transport measurements: 1.300 x 800 x 1.450 mm<br/>weight: 350 kg<br/><br/><br/><br/> : 2.450 X 27 X 0,9 MM
: 800 MM
: 1.330 X 1.300 X 1.880 MM
: 1.300 X 800 X 1.450 MM
: 350 KG
HYDRAULIC VICE
SAW BEAM MOVES UP AND DOWN BY HYDRAULIC CYLINDER
FAST DESCENT
UTOMATIC FAST UP/DOWN CONROLLED BY FEELER PIN
ADJUSTABLE PRESSURE ACCORDING TO SECTION AND TYPE OF MATERIAL
DOUBLE SAFETY BUTON FOR CYCLE START
2 SPEEDS
COOLANT EQUIPMENT


CUTTING CYCLE
VICE LOCKING, QUICK BOW PULL-DOWN HYDRAULICALLY OPERATED, BLADE ROTATION AND COOLING LIQUID START-UP,
WORKING PULL-DOWN, END OF THE CUTTING CYCLE, STOP OF BLADE ROTATION AND SUPPLY OF COOLING LIQUID,
QUICK BOW LIFT-UP, STOP OF BOW UPWARDS MOVEMENT, VICE UNLOCKING IF SELECTED.


OPTIONAL EQUIPMENT: ADJUSTABLE VICE PRESSURE     EUR 310,--


CUTTING CAPACITY:
90°: ROUND 220 MM, SQUARE 200 MM, RECTANGULAR 250 X 150 MM
45°: ROUND 160 MM, SQUARE 140 MM, RECTANGULAR 140 X 140 MM
60°: ROUND 90 MM, SQUARE 90 MM, RECTANGULAR 90 X 90 MM
BLADE DIMENSION: 2.450 X 27 X 0,9 MM
SPEED: 35/70 M/MIN
WORKING HEIGHT: 800 MM
MOTOR: 0,5/0,7 KW
MEASUREMENTS: 1.330 X 1.300 X 1.880 MM
TRANSPORT MEASUREMENTS: 1.300 X 800 X 1.450 MM
WEIGHT: 350 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.790 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1400 x 100 x 1300 mm<br/>description: - cutting diameter: 350 mm<br> - angles, cooling, half-automatic<br> - serial number: b 43/00019 WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 100 X 1300 MM
DESCRIPTION: - CUTTING DIAMETER: 350 MM
- ANGLES, COOLING, HALF-AUTOMATIC
- SERIAL NUMBER: B 43/00019
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cutting diameter: 260 mm<br/>saw band length: 3010x27x0,9 mm<br/>cutting width:  mm<br/>band speed: 35/70 m/min<br/>work height max.: 830 mm<br/>total power requirement: 0,9-1,5 kw<br/>weight of the machine ca.: 0,330 t<br/>dimensions of the machine ca.: 1,65x1,39x1,8 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 260 MM
SAW BAND LENGTH: 3010X27X0,9 MM
CUTTING WIDTH: MM
BAND SPEED: 35/70 M/MIN
WORK HEIGHT MAX.: 830 MM
TOTAL POWER REQUIREMENT: 0,9-1,5 KW
WEIGHT OF THE MACHINE CA.: 0,330 T
DIMENSIONS OF THE MACHINE CA.: 1,65X1,39X1,8 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 300 mm<br/>saw band length: 3270 x 27 x 0,9 mm<br/>cutting width:  mm<br/>feed per cut: 800 mm<br/>band speed: 35-70 m/min<br/>total power requirement: 0,9-1,5 kw<br/>weight of the machine ca.: 1 t<br/>dimensions of the machine ca.: 3220 x 1950 x 1990 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 300 MM
SAW BAND LENGTH: 3270 X 27 X 0,9 MM
CUTTING WIDTH: MM
FEED PER CUT: 800 MM
BAND SPEED: 35-70 M/MIN
TOTAL POWER REQUIREMENT: 0,9-1,5 KW
WEIGHT OF THE MACHINE CA.: 1 T
DIMENSIONS OF THE MACHINE CA.: 3220 X 1950 X 1990 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 260 mm<br/>saw band length: 3010x27x0,9 mm<br/>cutting width:  mm<br/>band speed: 20-100 m/min<br/>: 600 <br/>work height max.: 835 mm<br/>control:  <br/>total power requirement: 1,5 kw<br/>weight of the machine ca.: 0,7 t<br/>dimensions of the machine ca.: 2,6x1,75x1,7 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 260 MM
SAW BAND LENGTH: 3010X27X0,9 MM
CUTTING WIDTH: MM
BAND SPEED: 20-100 M/MIN
: 600
WORK HEIGHT MAX.: 835 MM
CONTROL:
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 0,7 T
DIMENSIONS OF THE MACHINE CA.: 2,6X1,75X1,7 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 260 mm<br/>saw band length: 3010 x 27x 0,9 mm<br/>cutting width:  mm<br/>total power requirement: 0,9-1,5 kw<br/>weight of the machine ca.: 0,700 t<br/>dimensions of the machine ca.: 2600 x 1750 x 1700 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 260 MM
SAW BAND LENGTH: 3010 X 27X 0,9 MM
CUTTING WIDTH: MM
TOTAL POWER REQUIREMENT: 0,9-1,5 KW
WEIGHT OF THE MACHINE CA.: 0,700 T
DIMENSIONS OF THE MACHINE CA.: 2600 X 1750 X 1700 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 300 mm<br/>saw band length: 3720x27x0,9 mm<br/>cutting width:  mm<br/>band speed: 35/70 m/min<br/>work height max.: 830 mm<br/>total power requirement: 0,9-1,5 kw<br/>weight of the machine ca.: 0,370 t<br/>dimensions of the machine ca.: 1,7x1,54x1,95 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 300 MM
SAW BAND LENGTH: 3720X27X0,9 MM
CUTTING WIDTH: MM
BAND SPEED: 35/70 M/MIN
WORK HEIGHT MAX.: 830 MM
TOTAL POWER REQUIREMENT: 0,9-1,5 KW
WEIGHT OF THE MACHINE CA.: 0,370 T
DIMENSIONS OF THE MACHINE CA.: 1,7X1,54X1,95 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 330 mm<br/>saw band length: 3010x27x0,9 mm<br/>cutting width:  mm<br/>work height max.: 830 mm<br/>band speed: 35/70 m/min<br/>capacity 90° rectangular: 330x140 mm<br/>capacity 90 degrees: round: 260 mm<br/>capacity 45 degrees: round: 200 mm<br/>: 120 mm<br/>: 190x190 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,400 t<br/>dimensions of the machine ca.: 1500x1390x1790 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 330 MM
SAW BAND LENGTH: 3010X27X0,9 MM
CUTTING WIDTH: MM
WORK HEIGHT MAX.: 830 MM
BAND SPEED: 35/70 M/MIN
CAPACITY 90° RECTANGULAR: 330X140 MM
CAPACITY 90 DEGREES: ROUND: 260 MM
CAPACITY 45 DEGREES: ROUND: 200 MM
: 120 MM
: 190X190 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,400 T
DIMENSIONS OF THE MACHINE CA.: 1500X1390X1790 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 280 mm<br/>saw band length: 3270 x 27 x 0,9 mm<br/>cutting width:  mm<br/>table height: 830 mm<br/>: 160 x 160 mm<br/>: 160 x 160 mm<br/>: 170 mm<br/>: 250 x 250 mm<br/>capacity 45° rectangular: 260 x 200 mm<br/>capacity 45 degrees: round: 200-260 mm<br/>capacity 90° rectangular: 420 x 180 mm<br/>capacity 90 degrees: square: 250 x 250 mm<br/>total power requirement: 0,9-1,5 kw<br/>weight of the machine ca.: 495 t<br/>dimensions of the machine ca.: 1630 x 1400 x 1800 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 280 MM
SAW BAND LENGTH: 3270 X 27 X 0,9 MM
CUTTING WIDTH: MM
TABLE HEIGHT: 830 MM
: 160 X 160 MM
: 160 X 160 MM
: 170 MM
: 250 X 250 MM
CAPACITY 45° RECTANGULAR: 260 X 200 MM
CAPACITY 45 DEGREES: ROUND: 200-260 MM
CAPACITY 90° RECTANGULAR: 420 X 180 MM
CAPACITY 90 DEGREES: SQUARE: 250 X 250 MM
TOTAL POWER REQUIREMENT: 0,9-1,5 KW
WEIGHT OF THE MACHINE CA.: 495 T
DIMENSIONS OF THE MACHINE CA.: 1630 X 1400 X 1800 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 280 mm<br/>saw band length: 3120 mm<br/>total power requirement: 1,5 kw<br/>weight of the machine ca.: 945 kg<br/>dimensions of the machine ca.: 2,8 x 1,9 x 1,9 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 280 MM
SAW BAND LENGTH: 3120 MM
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 945 KG
DIMENSIONS OF THE MACHINE CA.: 2,8 X 1,9 X 1,9 M




Vendedor: Sperling Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cutting diameter: 250 mm<br/>saw band length: 3010 mm<br/>cutting width: 330 mm<br/>dimensions of saw-band: 3010 x 27 x 09 mm<br/>cutting speed: 35 / 75 m/min<br/>mitter cutting: 45 °<br/>power capacity: 1,5 kw<br/>coolant:  <br/>voltage: 400 v<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 700 kg<br/>dimensions of the machine ca.: 2,60 x 1,75 x 1,70 m<br/>- fab. no.: 0003000633<br/><br/><br/><br/><br/> CUTTING DIAMETER: 250 MM
SAW BAND LENGTH: 3010 MM
CUTTING WIDTH: 330 MM
DIMENSIONS OF SAW-BAND: 3010 X 27 X 09 MM
CUTTING SPEED: 35 / 75 M/MIN
MITTER CUTTING: 45 °
POWER CAPACITY: 1,5 KW
COOLANT:
VOLTAGE: 400 V
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 700 KG
DIMENSIONS OF THE MACHINE CA.: 2,60 X 1,75 X 1,70 M
- FAB. NO.: 0003000633




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BIANCO types: