335 ofertas

Año de construcción: usado
Ubicación: Land-general

project no.: 904980
number: 1 pcs.
manufacturer: sw
type: ba 321
control: siemens 840 d
year of construction: 2012
state of preservation: second-hand machine
machine a (hours): 36.016
spindle a (hours): 14.478

description

milling

travel in x 300 mm
travel in y 450 mm
travel in z 375 mm
tool holder hsk-a63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 32 / - kw
maximum torque at ed 10-40 / 100% 72 / - nm
horizontally arranged 2 pcs. spindle/n
spindle distance 300 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 40 stations
max tool diameter 70 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 275 mm
maximum tool weight 7.5 kg
swivel unit nc-controlled
2 pcs. nc-controlled rotary table
rotary table diameter 220 mm
hydraulic clamping
1 additional / -r clamping circuit (s)
pneumatic work piece control

more facilities

ir workpiece measuring probes
tool breakage monitoring artis
tool time monitoring with sister tool management
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
scratch band chip conveyor (new)
internal coolant supply
coolant system with paper band filter (new)
high pressure pump (new) 70 bar
interface for automatic loading using bela de portal or robot
machine status light

general technical data

machine dimensions (lxwxh) approx. 2450 x 3800 x 4300 mm

comment

there are a total of 4 machines available!

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904980 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA 321 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2012 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 36.016 SPINDLE A (HOURS): 14.478 DESCRIPTION MILLING TRAVEL IN X 300 MM TRAVEL IN Y 450 MM TRAVEL IN Z 375 MM TOOL HOLDER HSK-A63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 32 / - KW MAXIMUM TORQUE AT ED 10-40 / 100% 72 / - NM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 300 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 40 STATIONS MAX TOOL DIAMETER 70 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 275 MM MAXIMUM TOOL WEIGHT 7.5 KG SWIVEL UNIT NC-CONTROLLED 2 PCS. NC-CONTROLLED ROTARY TABLE ROTARY TABLE DIAMETER 220 MM HYDRAULIC CLAMPING 1 ADDITIONAL / -R CLAMPING CIRCUIT (S) PNEUMATIC WORK PIECE CONTROL MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE MONITORING ARTIS TOOL TIME MONITORING WITH SISTER TOOL MANAGEMENT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA SCRATCH BAND CHIP CONVEYOR (NEW) INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER (NEW) HIGH PRESSURE PUMP (NEW) 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MACHINE STATUS LIGHT GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 2450 X 3800 X 4300 MM COMMENT THERE ARE A TOTAL OF 4 MACHINES AVAILABLE! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-automatic, working width 420 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n AUTOMATIC, WORKING WIDTH 420 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-max. glass dimensions: 3210x6000mm, with electrical tilting drive and driven plastic rolls.  MAX. GLASS DIMENSIONS: 3210X6000MM, WITH ELECTRICAL TILTING DRIVE AND DRIVEN PLASTIC ROLLS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-double-foil, l-sealer 550 x 550 mm,\r\nwelding bar automatic lifting/lowering\r\nadjustable\r\n  conveyor speed \r\n  sealing time adjustable\r\n  temperatur\r\naccessories\r\n  conveyor\r\n  automatic bag opener DOUBLE-FOIL, L-SEALER 550 X 550 MM,\R\NWELDING BAR AUTOMATIC LIFTING/LOWERING\R\NADJUSTABLE\R\N CONVEYOR SPEED \R\N SEALING TIME ADJUSTABLE\R\N TEMPERATUR\R\NACCESSORIES\R\N CONVEYOR\R\N AUTOMATIC BAG OPENER
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-one used die-cutter cylinder with inking unit
heidelberg sbb 57x82cm serial no.: 32174
good condition  ONE USED DIE-CUTTER CYLINDER WITH INKING UNIT HEIDELBERG SBB 57X82CM SERIAL NO.: 32174 GOOD CONDITION
Vendedor: YAVAS MASCHINENHANDEL
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-cnc machining center biesse rover 24 s

size: 3200 x 1300 mm
l x w x h: 430 x 300 x 280 cm
weight 4000 kg
built in 2001

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12           CNC MACHINING CENTER BIESSE ROVER 24 S SIZE: 3200 X 1300 MM L X W X H: 430 X 300 X 280 CM WEIGHT 4000 KG BUILT IN 2001 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-x-travel:980 mm<br/>y-travel:340 mm<br/>z-travel:440 mm<br/>table surface area:320 x 1350 mm<br/>swival range +/-:45 °<br/>spindle nose:iso 50 <br/>speeds::32...1600 u/min<br/>distance spindle nose and table:30-490 mm<br/>speed steps:18 <br/>feed range:10-1000 mm/min<br/>rapid travel range:2500/1040 m/min<br/>total power requirement:9,7 kw<br/>weight of the machine ca.:3000 kg<br/><br/> X-TRAVEL:980 MM
Y-TRAVEL:340 MM
Z-TRAVEL:440 MM
TABLE SURFACE AREA:320 X 1350 MM
SWIVAL RANGE +/-:45 °
SPINDLE NOSE:ISO 50
SPEEDS::32...1600 U/MIN
DISTANCE SPINDLE NOSE AND TABLE:30-490 MM
SPEED STEPS:18
FEED RANGE:10-1000 MM/MIN
RAPID TRAVEL RANGE:2500/1040 M/MIN
TOTAL POWER REQUIREMENT:9,7 KW
WEIGHT OF THE MACHINE CA.:3000 KG

Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-portal milling machine lbv 3219
manufacturer: leadwell
year: 2008

cnc fanuc... 21i - mb
clamping table surface... 3000 x 1700mm
x axis... 3200mm
distance between stand... 2000mm
distance between table and crossbar... 220-970 / 1450mm
y axis... 1800mm
z axis... 750mm
maximum table load... 10000kg
sk 50
spindle speed... 0-6000 rpm
l x w x h... 7630 x 5400 x 4120mm
the weight of the machine... 29000kg
magazine places... 24
total power consumption... 45kva

in very good condition, possible to try out under power.  PORTAL MILLING MACHINE LBV 3219 MANUFACTURER: LEADWELL YEAR: 2008 CNC FANUC... 21I - MB CLAMPING TABLE SURFACE... 3000 X 1700MM X AXIS... 3200MM DISTANCE BETWEEN STAND... 2000MM DISTANCE BETWEEN TABLE AND CROSSBAR... 220-970 / 1450MM Y AXIS... 1800MM Z AXIS... 750MM MAXIMUM TABLE LOAD... 10000KG SK 50 SPINDLE SPEED... 0-6000 RPM L X W X H... 7630 X 5400 X 4120MM THE WEIGHT OF THE MACHINE... 29000KG MAGAZINE PLACES... 24 TOTAL POWER CONSUMPTION... 45KVA IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-turning diameter: 570 mm<br/>turning length: 635 mm<br/>control: heidenhain cnc <br/>swing diameter over slide rest: 420 mm<br/>cross movement: 220 mm<br/>main spindle:  <br/>spindle bore: 79 mm<br/>chucking diameter: 225 mm<br/>power capacity at 100 % load: 21 kw<br/>max. torque: 240 nm<br/>turning speed range: 25-5000 u/min<br/>c-axis (main spindle:  <br/>turning speeds: 100 u/min<br/>feed drive cross slide:  <br/>rapid travel speed x-axis: 20 m/min<br/>rapid travel speed z-axis: 24 m/min<br/>universal disc revolver with driven tools:  <br/>number of tool stations: 12 <br/>therefrom driven tools: max. 6 <br/>power requirement: 5 kw<br/>tail stock:  <br/>tailstock diameter in the front section: 80 mm<br/>tailstock adjustment: 550 mm<br/>tailstock taper: mk 4 <br/>overall size of machine without chip conveyor/-tub: 3210x1750x1750 mm<br/>weight of the machine without chip conveyor/-tub: ca. 5300 kg<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>very good condition - with c - axis and driven tools, inspection under power in our stock possible<br/><br/>connection hours 28404 h<br/><br/><br/>equipment / accessories:<br/><br/>- power chuck rota ncw 225 - 7<br/>- 40 standard tool holders<br/>- 7 driven tool holders<br/>- 1 hydraulical steady rest<br/>- tailstock<br/>- chip conveyor<br/>- documentation<br/><br/><br/><br/><br/> TURNING DIAMETER: 570 MM
TURNING LENGTH: 635 MM
CONTROL: HEIDENHAIN CNC
SWING DIAMETER OVER SLIDE REST: 420 MM
CROSS MOVEMENT: 220 MM
MAIN SPINDLE:
SPINDLE BORE: 79 MM
CHUCKING DIAMETER: 225 MM
POWER CAPACITY AT 100 % LOAD: 21 KW
MAX. TORQUE: 240 NM
TURNING SPEED RANGE: 25-5000 U/MIN
C-AXIS (MAIN SPINDLE:
TURNING SPEEDS: 100 U/MIN
FEED DRIVE CROSS SLIDE:
RAPID TRAVEL SPEED X-AXIS: 20 M/MIN
RAPID TRAVEL SPEED Z-AXIS: 24 M/MIN
UNIVERSAL DISC REVOLVER WITH DRIVEN TOOLS:
NUMBER OF TOOL STATIONS: 12
THEREFROM DRIVEN TOOLS: MAX. 6
POWER REQUIREMENT: 5 KW
TAIL STOCK:
TAILSTOCK DIAMETER IN THE FRONT SECTION: 80 MM
TAILSTOCK ADJUSTMENT: 550 MM
TAILSTOCK TAPER: MK 4
OVERALL SIZE OF MACHINE WITHOUT CHIP CONVEYOR/-TUB: 3210X1750X1750 MM
WEIGHT OF THE MACHINE WITHOUT CHIP CONVEYOR/-TUB: CA. 5300 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
VERY GOOD CONDITION - WITH C - AXIS AND DRIVEN TOOLS, INSPECTION UNDER POWER IN OUR STOCK POSSIBLE

CONNECTION HOURS 28404 H


EQUIPMENT / ACCESSORIES:

- POWER CHUCK ROTA NCW 225 - 7
- 40 STANDARD TOOL HOLDERS
- 7 DRIVEN TOOL HOLDERS
- 1 HYDRAULICAL STEADY REST
- TAILSTOCK
- CHIP CONVEYOR
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Precio: 490 €
Ubicación: Land-anchors be glue and loading machine biesse sv/j

masch. no. 476/86
l x w x h: 0.8 x 0.8 x 2.3 m
built in 1986
weight approx. 480 kg

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      
 

  



 ANCHORS BE GLUE AND LOADING MACHINE BIESSE SV/J MASCH. NO. 476/86 L X W X H: 0.8 X 0.8 X 2.3 M BUILT IN 1986 WEIGHT APPROX. 480 KG THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 440 mm<br/>turning diameter over slide rest: 267 mm<br/>turning length: 1500 mm<br/>spindle passage: 76 mm<br/>turning speed range: 16 x 20 - 1600 u/min<br/>centre height: 220 mm<br/>turning diameter in the gap: 710 mm<br/>threading whitworth: 38 x 2 - 72 t.p.i<br/>threading - metric: 40 x 0,4 - 14 mm<br/>threading - modul: 18 x 0,3 - 3,50 mm<br/>spindle taper: 8 d1 camlock <br/>face feeds per rotation: 0,03 - 0,5 mm<br/>longitudinal feeds per rotation: 0,06 - 1,0 mm<br/>tailstock quill taper mt: 5 <br/>tailstock quill diameter: 75 mm<br/>tailstock quill stroke: 230 mm<br/>radial face slide travel: 280 mm<br/>upper slide-adjustment: 150 mm<br/>total power requirement: 9,4 kw<br/>weight of the machine ca.: 2,3 t<br/>dimensions of the machine ca.: 3,5 x 1,7 x 2,0 m<br/>digital display<br/>3-jaw chuck Ø 315mm 4 sets of chucks,<br/>4-jaw chuck Ø 315mm 3 sets of chucks, <br/>4-fold toolholder bd 32140, coolant device,<br/>rotating centering device<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 440 MM
TURNING DIAMETER OVER SLIDE REST: 267 MM
TURNING LENGTH: 1500 MM
SPINDLE PASSAGE: 76 MM
TURNING SPEED RANGE: 16 X 20 - 1600 U/MIN
CENTRE HEIGHT: 220 MM
TURNING DIAMETER IN THE GAP: 710 MM
THREADING WHITWORTH: 38 X 2 - 72 T.P.I
THREADING - METRIC: 40 X 0,4 - 14 MM
THREADING - MODUL: 18 X 0,3 - 3,50 MM
SPINDLE TAPER: 8 D1 CAMLOCK
FACE FEEDS PER ROTATION: 0,03 - 0,5 MM
LONGITUDINAL FEEDS PER ROTATION: 0,06 - 1,0 MM
TAILSTOCK QUILL TAPER MT: 5
TAILSTOCK QUILL DIAMETER: 75 MM
TAILSTOCK QUILL STROKE: 230 MM
RADIAL FACE SLIDE TRAVEL: 280 MM
UPPER SLIDE-ADJUSTMENT: 150 MM
TOTAL POWER REQUIREMENT: 9,4 KW
WEIGHT OF THE MACHINE CA.: 2,3 T
DIMENSIONS OF THE MACHINE CA.: 3,5 X 1,7 X 2,0 M
DIGITAL DISPLAY
3-JAW CHUCK Ø 315MM 4 SETS OF CHUCKS,
4-JAW CHUCK Ø 315MM 3 SETS OF CHUCKS,
4-FOLD TOOLHOLDER BD 32140, COOLANT DEVICE,
ROTATING CENTERING DEVICE




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-p124 - used approx. 15 m³ / 15,000 l pe-hostalen gm5010t2-tanks, plastic tanks, flat bottom tanks, double-walled with an outer hull. 

technical details: 
capacity: approx. 15 m³ / 15,000 litres 
material: pe hostalen 
manufacturer: kunststofftechnik kg troisdorf 
dibt: pa-vi-321.053 available 
dimensions: outer Ø 3.0 m  inner Ø ca. 2.0 m   total approx. 4.0 m 

miscellaneous: used, in good condition. double-walled, i.e. with an outer hull, non-translucid, with various ports, ventilation, inlets, suction pipes, lids on top of the roof. 

the containers may be used for storing liquids according to media list 40-1.1 of the dibt. these are former chemical tanks for media such as caustic soda, hydrochloric acid, acetic acid, formic acid, nitric acid, hydrogen peroxide etc. storage tanks for water, seeping juice, liquid manure, and many different chemicals.

the versatile, high-quality plastic tanks are used and in good used condition. according to the age, traces of use are present. as high-quality plastic storage containers made of pe they are very resistant to numerous media. these indestructible pe plastic tanks are impervious to light and suitable for universal use in agriculture, swimming pool management and water installations, as well as in many areas of industry and chemistry, e.g. for process- and rain water. 

price upon request. 

transport can be arranged at low cost. also we can modify the tank to suit your demands, just ask us. 

it is not possible to update all our advertisements daily. since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. please give us a call or write, so that we can advise you personally. 

more information and offers on our site: 
profi-tanks(dot)de  P124 - USED APPROX. 15 M³ / 15,000 L PE-HOSTALEN GM5010T2-TANKS, PLASTIC TANKS, FLAT BOTTOM TANKS, DOUBLE-WALLED WITH AN OUTER HULL. TECHNICAL DETAILS: CAPACITY: APPROX. 15 M³ / 15,000 LITRES MATERIAL: PE HOSTALEN MANUFACTURER: KUNSTSTOFFTECHNIK KG TROISDORF DIBT: PA-VI-321.053 AVAILABLE DIMENSIONS: OUTER Ø 3.0 M INNER Ø CA. 2.0 M TOTAL APPROX. 4.0 M MISCELLANEOUS: USED, IN GOOD CONDITION. DOUBLE-WALLED, I.E. WITH AN OUTER HULL, NON-TRANSLUCID, WITH VARIOUS PORTS, VENTILATION, INLETS, SUCTION PIPES, LIDS ON TOP OF THE ROOF. THE CONTAINERS MAY BE USED FOR STORING LIQUIDS ACCORDING TO MEDIA LIST 40-1.1 OF THE DIBT. THESE ARE FORMER CHEMICAL TANKS FOR MEDIA SUCH AS CAUSTIC SODA, HYDROCHLORIC ACID, ACETIC ACID, FORMIC ACID, NITRIC ACID, HYDROGEN PEROXIDE ETC. STORAGE TANKS FOR WATER, SEEPING JUICE, LIQUID MANURE, AND MANY DIFFERENT CHEMICALS. THE VERSATILE, HIGH-QUALITY PLASTIC TANKS ARE USED AND IN GOOD USED CONDITION. ACCORDING TO THE AGE, TRACES OF USE ARE PRESENT. AS HIGH-QUALITY PLASTIC STORAGE CONTAINERS MADE OF PE THEY ARE VERY RESISTANT TO NUMEROUS MEDIA. THESE INDESTRUCTIBLE PE PLASTIC TANKS ARE IMPERVIOUS TO LIGHT AND SUITABLE FOR UNIVERSAL USE IN AGRICULTURE, SWIMMING POOL MANAGEMENT AND WATER INSTALLATIONS, AS WELL AS IN MANY AREAS OF INDUSTRY AND CHEMISTRY, E.G. FOR PROCESS- AND RAIN WATER. PRICE UPON REQUEST. TRANSPORT CAN BE ARRANGED AT LOW COST. ALSO WE CAN MODIFY THE TANK TO SUIT YOUR DEMANDS, JUST ASK US. IT IS NOT POSSIBLE TO UPDATE ALL OUR ADVERTISEMENTS DAILY. SINCE OUR INVENTORY IS CHANGING CONTINUOUSLY, IT MAY BE THAT THIS TANK HAS ALREADY BEEN SOLD BUT A SIMILAR ONE IS IN STOCK. PLEASE GIVE US A CALL OR WRITE, SO THAT WE CAN ADVISE YOU PERSONALLY. MORE INFORMATION AND OFFERS ON OUR SITE: PROFI-TANKS(DOT)DE
Vendedor: Profihandels GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 6,0 mm<br/>down holder: 18 stück<br/>cutting angle: 0,5 - 3,0 °<br/>no. of strokes: 17/9 hub/min<br/>back stop - adjustable: 750 mm<br/>work height max.: 770 mm<br/>angle stop -forward: 1000 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 4.800 kg<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 6,0 MM
DOWN HOLDER: 18 STüCK
CUTTING ANGLE: 0,5 - 3,0 °
NO. OF STROKES: 17/9 HUB/MIN
BACK STOP - ADJUSTABLE: 750 MM
WORK HEIGHT MAX.: 770 MM
ANGLE STOP -FORWARD: 1000 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 4.800 KG




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 5.571 €
Ubicación: Land-on exclusive sale next 07 march 2019 at 11:30 at our offices in bergamo
check out our mercury auctions website for a direct download of the full call for applications and catalogue, or contact us at 030 7751645 office hours 9-13, 14:18
single lot including:
- tapered feet
- handrails
- wall supports 
- walnut/rover/etc. wallpaper rods
- skirting
- mahogany/rover/walnut/etc. jambs
- wire cover 
- 1/4 round
- contra-angles white
- edge protection 
- shelf supports
- nails
- angular plate
- bandella 
- screws 
- trowels
- spatulas 
- roller shutters
- enamel
for more information see attached list (see annex 1).
   ON EXCLUSIVE SALE NEXT 07 MARCH 2019 AT 11:30 AT OUR OFFICES IN BERGAMO CHECK OUT OUR MERCURY AUCTIONS WEBSITE FOR A DIRECT DOWNLOAD OF THE FULL CALL FOR APPLICATIONS AND CATALOGUE, OR CONTACT US AT 030 7751645 OFFICE HOURS 9-13, 14:18 SINGLE LOT INCLUDING: - TAPERED FEET - HANDRAILS - WALL SUPPORTS - WALNUT/ROVER/ETC. WALLPAPER RODS - SKIRTING - MAHOGANY/ROVER/WALNUT/ETC. JAMBS - WIRE COVER - 1/4 ROUND - CONTRA-ANGLES WHITE - EDGE PROTECTION - SHELF SUPPORTS - NAILS - ANGULAR PLATE - BANDELLA - SCREWS - TROWELS - SPATULAS - ROLLER SHUTTERS - ENAMEL FOR MORE INFORMATION SEE ATTACHED LIST (SEE ANNEX 1).
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 1.050 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 3500 x 1500 x 1330 mm<br/>description: ? moulder<br> ? serial number rom5064v.1085<br> ? working width from 30 mm up to 220 mm<br> ? working height from 6 mm up to 120 mm<br> ? total table length 3500 mm<br> ? entrance table length 2480 mm<br> ? 4 heads: below 3.70 kw - right 3.70 kw - left 3.70 kw - above 5.50 kw<br> ? spindles diameter 40 mm<br> ? spindles rotation speed 6000 rpm<br> ? feeding motor 1.10 kw<br> ? 2 feed speeds WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 1500 X 1330 MM
DESCRIPTION: ? MOULDER
? SERIAL NUMBER ROM5064V.1085
? WORKING WIDTH FROM 30 MM UP TO 220 MM
? WORKING HEIGHT FROM 6 MM UP TO 120 MM
? TOTAL TABLE LENGTH 3500 MM
? ENTRANCE TABLE LENGTH 2480 MM
? 4 HEADS: BELOW 3.70 KW - RIGHT 3.70 KW - LEFT 3.70 KW - ABOVE 5.50 KW
? SPINDLES DIAMETER 40 MM
? SPINDLES ROTATION SPEED 6000 RPM
? FEEDING MOTOR 1.10 KW
? 2 FEED SPEEDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-data:

genius rbm-j
-tilting table for jumbo glass plates
-glass thickness: 3-19 mm
-maximum glass size: 6100 x 3210 mm
-min. glass size: 3710 x 2750 mm
-height of the work table: 925 mm
-weight: 4500 kg
genius cam j
-automatic loading de crane for jumbo glass plates - with high lifting
-min. glass size: 2400 x 1800 mm
-for glass dimensions between: 3210 x 2400 x 3 mm up to 6000 x 3210 x 19 mm
-height: 700 mm
-also for low-e glass
-operation via a touch screen panel
-loading crane moving on 12 long rails
-max load weight: 950 kg
genius a 61
-glass shelf storage for jumbo glass plates
-1 fixed element: floor space: 300 mm, maximum capacity: 12 tons
-1 mobile item: floor space: 300 mm, maximum capacity: 12 tons
-24 movable elements: space: 170 mm, capacity: 6 tons
-total length: 9100 mm
-on the side of the glass with a special felt-coated

price on request DATA: GENIUS RBM-J -TILTING TABLE FOR JUMBO GLASS PLATES -GLASS THICKNESS: 3-19 MM -MAXIMUM GLASS SIZE: 6100 X 3210 MM -MIN. GLASS SIZE: 3710 X 2750 MM -HEIGHT OF THE WORK TABLE: 925 MM -WEIGHT: 4500 KG GENIUS CAM J -AUTOMATIC LOADING DE CRANE FOR JUMBO GLASS PLATES - WITH HIGH LIFTING -MIN. GLASS SIZE: 2400 X 1800 MM -FOR GLASS DIMENSIONS BETWEEN: 3210 X 2400 X 3 MM UP TO 6000 X 3210 X 19 MM -HEIGHT: 700 MM -ALSO FOR LOW-E GLASS -OPERATION VIA A TOUCH SCREEN PANEL -LOADING CRANE MOVING ON 12 LONG RAILS -MAX LOAD WEIGHT: 950 KG GENIUS A 61 -GLASS SHELF STORAGE FOR JUMBO GLASS PLATES -1 FIXED ELEMENT: FLOOR SPACE: 300 MM, MAXIMUM CAPACITY: 12 TONS -1 MOBILE ITEM: FLOOR SPACE: 300 MM, MAXIMUM CAPACITY: 12 TONS -24 MOVABLE ELEMENTS: SPACE: 170 MM, CAPACITY: 6 TONS -TOTAL LENGTH: 9100 MM -ON THE SIDE OF THE GLASS WITH A SPECIAL FELT-COATED PRICE ON REQUEST
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.500 €
Ubicación: Land-serial number: 62036 <br/>weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 5200 x 2300 x 2100 mm<br/>description: serial number 62036, cnc control, is with 3 axes, main spindle approx. 6,8 kw, working range x-ahs 2700 mm, y-axis for points 1204 mm, y-axis for milling 1144 mm, maximum workable plate thickness 114 mm , max. pre-programmable speed x-axis 75 u / minute, y-axis 75 u / minute, z-axis 5 u / minute, max. turning speed 4000 rpm, circular blade / grooving saw 180 mm diameter, SERIAL NUMBER: 62036
WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 5200 X 2300 X 2100 MM
DESCRIPTION: SERIAL NUMBER 62036, CNC CONTROL, IS WITH 3 AXES, MAIN SPINDLE APPROX. 6,8 KW, WORKING RANGE X-AHS 2700 MM, Y-AXIS FOR POINTS 1204 MM, Y-AXIS FOR MILLING 1144 MM, MAXIMUM WORKABLE PLATE THICKNESS 114 MM , MAX. PRE-PROGRAMMABLE SPEED X-AXIS 75 U / MINUTE, Y-AXIS 75 U / MINUTE, Z-AXIS 5 U / MINUTE, MAX. TURNING SPEED 4000 RPM, CIRCULAR BLADE / GROOVING SAW 180 MM DIAMETER,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-data:

cutting table genius 61 ct
-nc controlled cutting table, tiltable
-with 3 controlled axes
-for straight and forms cut on glass plates
-with cutting bridge
-with laser scanner for detecting templates
-laser scanner for the orientation of the plates
-maximum dimensions: 6100 x 3210 mm
-glass thickness: 3-19 mm
-height of the work surface: 900 mm
-machine dimension: 7900 x 2275 x 2000 mm
-weight: 3900 kg

brechtian genius 61 st
-working table with rigid work surface and air cushions
-end part with folding arms
-3 horizontal and 2 lã¤ngsbrechleisten
-3 tilt arms for removing glass plate
-direction of rotation: left - right
-glass thickness: 3-19 mm
-height of the work surface: 900 mm
-machine dimension: 7900 x 2275 x 2000 mm
-weight: 3500 kg

price on request DATA: CUTTING TABLE GENIUS 61 CT -NC CONTROLLED CUTTING TABLE, TILTABLE -WITH 3 CONTROLLED AXES -FOR STRAIGHT AND FORMS CUT ON GLASS PLATES -WITH CUTTING BRIDGE -WITH LASER SCANNER FOR DETECTING TEMPLATES -LASER SCANNER FOR THE ORIENTATION OF THE PLATES -MAXIMUM DIMENSIONS: 6100 X 3210 MM -GLASS THICKNESS: 3-19 MM -HEIGHT OF THE WORK SURFACE: 900 MM -MACHINE DIMENSION: 7900 X 2275 X 2000 MM -WEIGHT: 3900 KG BRECHTIAN GENIUS 61 ST -WORKING TABLE WITH RIGID WORK SURFACE AND AIR CUSHIONS -END PART WITH FOLDING ARMS -3 HORIZONTAL AND 2 L&ATILDE;&CURREN;NGSBRECHLEISTEN -3 TILT ARMS FOR REMOVING GLASS PLATE -DIRECTION OF ROTATION: LEFT - RIGHT -GLASS THICKNESS: 3-19 MM -HEIGHT OF THE WORK SURFACE: 900 MM -MACHINE DIMENSION: 7900 X 2275 X 2000 MM -WEIGHT: 3500 KG PRICE ON REQUEST
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 380 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 5000 x 900 x 880 mm<br/>description: ? driven roller conveyor<br> ? serial number 9321201<br> ? length 5000 mm<br> ? roller width 590 mm<br> ? roller diameter 50 mm<br> ? distance between rollers 120 mm<br> ? adjustable height WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 900 X 880 MM
DESCRIPTION: ? DRIVEN ROLLER CONVEYOR
? SERIAL NUMBER 9321201
? LENGTH 5000 MM
? ROLLER WIDTH 590 MM
? ROLLER DIAMETER 50 MM
? DISTANCE BETWEEN ROLLERS 120 MM
? ADJUSTABLE HEIGHT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-jig agie agietron integral bj. 1995-2053

connection: 3x400v / 30a min. size: 3350 x 1630 x 2580 mm
: weight 3210

senkerodieranlage 28-fach electrode changer with integrated fire extinguishing. the sleeve via the its 100 erowa clamping system. 
the machine is in good condition according to the age and works fine. the last complete service, where all defective parts have been replaced, was about 2 years ago.
the filling of the tank does not always work properly. to resolve this error have two potentiometers (prec. potent. 10 kohm 5%) be exchanged with accompanying board (adc-14). JIG AGIE AGIETRON INTEGRAL BJ. 1995-2053 CONNECTION: 3X400V / 30A MIN. SIZE: 3350 X 1630 X 2580 MM : WEIGHT 3210 SENKERODIERANLAGE 28-FACH ELECTRODE CHANGER WITH INTEGRATED FIRE EXTINGUISHING. THE SLEEVE VIA THE ITS 100 EROWA CLAMPING SYSTEM. THE MACHINE IS IN GOOD CONDITION ACCORDING TO THE AGE AND WORKS FINE. THE LAST COMPLETE SERVICE, WHERE ALL DEFECTIVE PARTS HAVE BEEN REPLACED, WAS ABOUT 2 YEARS AGO. THE FILLING OF THE TANK DOES NOT ALWAYS WORK PROPERLY. TO RESOLVE THIS ERROR HAVE TWO POTENTIOMETERS (PREC. POTENT. 10 KOHM 5%) BE EXCHANGED WITH ACCOMPANYING BOARD (ADC-14).
Vendedor: WAGO Kontakttechnik GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 3100 kg<br/>dimensions (l x w x h) approx.: 5900 x 1900 x 2450 mm<br/>description: serial number 4111350, total installed power 32 kw, working width 1100 mm, working height from 4 mm up to 160 mm, 1st aggregate: 1 grooved steel calibration roller with diameter approx. 220 mm, 2nd aggregate: 1 grooved steel calibration roller with diameter approx. 220 mm, 3rd aggregate: 1 grooved rubber sanding roller with diameter approx. 320 mm, belt conveyor with variable feed speed from 4 m/min up to 20 m/min, feed motor power 1.50 kw, 2 roller conveyors are included with useful dimensions 1200 x 1000 mm and 1800 x 1000 mm WEIGHT APPROX.: 3100 KG
DIMENSIONS (L X W X H) APPROX.: 5900 X 1900 X 2450 MM
DESCRIPTION: SERIAL NUMBER 4111350, TOTAL INSTALLED POWER 32 KW, WORKING WIDTH 1100 MM, WORKING HEIGHT FROM 4 MM UP TO 160 MM, 1ST AGGREGATE: 1 GROOVED STEEL CALIBRATION ROLLER WITH DIAMETER APPROX. 220 MM, 2ND AGGREGATE: 1 GROOVED STEEL CALIBRATION ROLLER WITH DIAMETER APPROX. 220 MM, 3RD AGGREGATE: 1 GROOVED RUBBER SANDING ROLLER WITH DIAMETER APPROX. 320 MM, BELT CONVEYOR WITH VARIABLE FEED SPEED FROM 4 M/MIN UP TO 20 M/MIN, FEED MOTOR POWER 1.50 KW, 2 ROLLER CONVEYORS ARE INCLUDED WITH USEFUL DIMENSIONS 1200 X 1000 MM AND 1800 X 1000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904929
number: 1 pcs.
manufacturer: gildemeister
type: ctx 400 s2
control: heidenhain cnc pilot 3190
year of construction: 1998
state of preservation: second-hand machine
machine a (hours): 47,000
spindle a (hours): 10,000

description

turning

2 axes
maximum turning diameter 250 mm
maximum swing over bed cover 570 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 22 kw
maximum torque of main spindle in ed 10-40 / 100% 240 nm
main spindle spindle forward 79 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h5
tailstock

turret top
number of stations of which powered 12/0
tool holder in the turret vdi 30
the turret of x/z axes
travel in x/y/z 220 /-/ 635 mm
maximum rapid traverse in x/y/z 20 /-/ 24 m / min
feed force in the x/y/z 3500 /-/ 7000 n

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
chip conveyor
machine is / was operated with emulsion
coolant system

accessories

pcs. 3 - jaw chuck mm
set of clamping jaws
1 set of tool holder for rotary tools
machine dimensions (lxwxh) approx. 3210 x 1750 x 1750 mm
machine weight approx. 5300 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904929 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTX 400 S2 CONTROL: HEIDENHAIN CNC PILOT 3190 YEAR OF CONSTRUCTION: 1998 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 47,000 SPINDLE A (HOURS): 10,000 DESCRIPTION TURNING 2 AXES MAXIMUM TURNING DIAMETER 250 MM MAXIMUM SWING OVER BED COVER 570 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 22 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 240 NM MAIN SPINDLE SPINDLE FORWARD 79 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H5 TAILSTOCK TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/0 TOOL HOLDER IN THE TURRET VDI 30 THE TURRET OF X/Z AXES TRAVEL IN X/Y/Z 220 /-/ 635 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 20 /-/ 24 M / MIN FEED FORCE IN THE X/Y/Z 3500 /-/ 7000 N MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM ACCESSORIES PCS. 3 - JAW CHUCK MM SET OF CLAMPING JAWS 1 SET OF TOOL HOLDER FOR ROTARY TOOLS MACHINE DIMENSIONS (LXWXH) APPROX. 3210 X 1750 X 1750 MM MACHINE WEIGHT APPROX. 5300 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: 2.900 €
Ubicación: Land-; mileage [km]: 321480; power [ps]: 155; gross weight [kg]: 7490; transmission: mechanisch; front tyre size: 235/75r17.5; rear tyre size: 235/75r17.5; accessories: abs; colour: weiß; wheelbase: 4900; cargo space dimensions [lxbxh]: 7200x2480x500; max payload [kg]: 2890; emission class: euro 2 ; MILEAGE [KM]: 321480; POWER [PS]: 155; GROSS WEIGHT [KG]: 7490; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 235/75R17.5; REAR TYRE SIZE: 235/75R17.5; ACCESSORIES: ABS; COLOUR: WEIß; WHEELBASE: 4900; CARGO SPACE DIMENSIONS [LXBXH]: 7200X2480X500; MAX PAYLOAD [KG]: 2890; EMISSION CLASS: EURO 2
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-cnc machining center biesse skipper v31, year 2013

machine no.	57349
working field in x-direction	2500 mm
working field in y-direction	900 mm
workpiece dimensions:	
length - x	200 - 2,500 mm
width - y	70 - 900 mm
thickness - z	10 - 70 mm
drilling spindles horizontal, grid 32 mm	4 + 2 (4 spindles in x-direction and 2 spindles in y-direction)
drilling spindles vertical, grid 32 mm	10 pcs. (5 spindles in x-direction and 5 spindles in y-direction)
milling spindle	4.5 kw with iso 30 adapter, air-cooled
rotation speed	from 1,000 to 24,000 rpm
engine power	12.2 kw
machine programming	biesseworks
grooving saw	Ø 120 mm in x, maximum depth for cuts 25 mm
collets	1 pc.
extraction is needed	2,750 m³ / h
air demand	400 nl / min.
working height from the ground:	700 - 750 mm
software packet	hops 6 4 av1-1.av license
teleservice package	via 
documentation	available
electrical connection value	12 kw
mass	1300 kg

(subject to errors, technical modifications and prior sale)
 CNC MACHINING CENTER BIESSE SKIPPER V31, YEAR 2013 MACHINE NO. 57349 WORKING FIELD IN X-DIRECTION 2500 MM WORKING FIELD IN Y-DIRECTION 900 MM WORKPIECE DIMENSIONS: LENGTH - X 200 - 2,500 MM WIDTH - Y 70 - 900 MM THICKNESS - Z 10 - 70 MM DRILLING SPINDLES HORIZONTAL, GRID 32 MM 4 + 2 (4 SPINDLES IN X-DIRECTION AND 2 SPINDLES IN Y-DIRECTION) DRILLING SPINDLES VERTICAL, GRID 32 MM 10 PCS. (5 SPINDLES IN X-DIRECTION AND 5 SPINDLES IN Y-DIRECTION) MILLING SPINDLE 4.5 KW WITH ISO 30 ADAPTER, AIR-COOLED ROTATION SPEED FROM 1,000 TO 24,000 RPM ENGINE POWER 12.2 KW MACHINE PROGRAMMING BIESSEWORKS GROOVING SAW Ø 120 MM IN X, MAXIMUM DEPTH FOR CUTS 25 MM COLLETS 1 PC. EXTRACTION IS NEEDED 2,750 M³ / H AIR DEMAND 400 NL / MIN. WORKING HEIGHT FROM THE GROUND: 700 - 750 MM SOFTWARE PACKET HOPS 6 4 AV1-1.AV LICENSE TELESERVICE PACKAGE VIA DOCUMENTATION AVAILABLE ELECTRICAL CONNECTION VALUE 12 KW MASS 1300 KG (SUBJECT TO ERRORS, TECHNICAL MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Precio: 73.500 €
Ubicación: Land-; power [ps]: 211; gross weight [kg]: 13500; transmission: automatisch; front tyre size: 285/70r19.5; rear tyre size: 285/70r19.5; accessories: abs, bordcomputer, differentialsperre, klimaanlage, tempomat, ets - eletronische traktionskontrolle; colour: orange; wheelbase: 4160; cargo space dimensions [lxbxh]: 3800x2340x500; max payload [kg]: 7500 ; POWER [PS]: 211; GROSS WEIGHT [KG]: 13500; TRANSMISSION: AUTOMATISCH; FRONT TYRE SIZE: 285/70R19.5; REAR TYRE SIZE: 285/70R19.5; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, KLIMAANLAGE, TEMPOMAT, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: ORANGE; WHEELBASE: 4160; CARGO SPACE DIMENSIONS [LXBXH]: 3800X2340X500; MAX PAYLOAD [KG]: 7500
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-cnc portal machining center biesse arrow, year 2007

machine no.	98642
travel of the axes:	
x axis 4300 mm (169“), 80 m/min
y-axis 4000 mm (157“), 60 m/min
w-axis 4000 mm (157“), 60 m/min
z-axis 300 mm (11,8“),  25 m/min
c-axis 360°
workpiece passage height	300 mm (11,8“)

2 raster work desks	ever. 1600 x 3100 mm (63 CNC PORTAL MACHINING CENTER BIESSE ARROW, YEAR 2007 MACHINE NO. 98642 TRAVEL OF THE AXES: X AXIS 4300 MM (169“), 80 M/MIN Y-AXIS 4000 MM (157“), 60 M/MIN W-AXIS 4000 MM (157“), 60 M/MIN Z-AXIS 300 MM (11,8“), 25 M/MIN C-AXIS 360° WORKPIECE PASSAGE HEIGHT 300 MM (11,8“) 2 RASTER WORK DESKS EVER. 1600 X 3100 MM (63 "X 126"). TOTAL WORKING FIELD FOR SYNCHRONOUS OPERATION OF BOTH TABLES 3220 X 3100 MM (126 "X 122") ELECTRIC SPINDLE HSD 17 KW LIQUID COOLED, MAX 24.000 RPM WITH C-AXIS. 2 BLOWING DEVICES FOR TOOL COOLING, CHIP REMOVAL AND CLEANING OF THE PIECES. TOOL MAGAZINE WITH 10 PLACES REVOLVER MAGAZINE WITH 10 POSITIONS FOR HOLDING 10 TOOLS WITH 105 MM DIAMETER OR 5 TOOLS D = 160 AND 5 TOOLS D = 50 MM. DRILLING UNIT BH19 13 VERTICAL SPINDLES, 32MM PITCH, T-SHAPED, 5 IN X DIRECTION AND 8 IN Y DIRECTION, 3 GROUPS FOR OPPOSITE HORIZONTAL HOLES, 1 IN X DIRECTION AND 2 IN Y-DIRECTION WITH A TOTAL OF 6 HORIZONTAL SPINDLES. SAW UNIT 360 ° WITH HORIZONTAL MOTOR POWER: 8.1 KW AT 7,000 RPM, 360 ° ROTATION. SAW BLADES UP TO 200 MM DIAMETER AND 47.5 MM THICKNESS. GRID TABLE THE TWO 30 MM GRID WORK TABLES, FOR QUICK INSERTION OF SEALING CORD OR STANDARD VACUUM MODULES, MADE OF PHENOL LAYER MATERIAL ARE EQUIPPED WITH A VACUUM CLAMPING SYSTEM. OVER THE ENTIRE SURFACE, VACUUM PASSAGES ARE INTEGRATED IN THE 150MM GRID WITH QUICK-RELEASE FASTENERS. 18 LOWERABLE STOPS (9 PER TABLE) ARRANGED IN "L" SHAPE TO CREATE 2 REFERENCE POINTS PER TABLE WITH A CENTER DISTANCE OF 780 MM. M8 THREADED INSERTS FOR ATTACHMENT OF CLAMPING TEMPLATES OR CLAMPING DEVICES. BUTTONS FOR START, STOP, EMERGENCY STOP, VACUUM ON / OFF AND PRESSURE GAUGE OF THE NEGATIVE PRESSURE. 1 PNEUMATIC CNC-CONTROLLED OUTPUT FOR EVERY WORKTABLE. VACUUM SYSTEM 2 VACUUM PUMPS EACH. 250 M3 / H. 2 VACUUM STORAGE TANKS INTEGRATED IN THE MACHINE BED. 2 VACUUM AREAS FOR EVERY WORKTABLE. RELEASE BY CHOICEOR SWITCH OR FOOT PEDAL. MOBILE CONTROL PANEL WITH PC AND INTEGRATED 15 "LCD MONITOR, KEYBOARD AND MOUSE. WINDOWS XP OPERATING SYSTEM WITH ITS OWN EXTENSION FOR REAL-TIME PROCESS MANAGEMENT, HARDWARE: HARD DISK 80GB, PENTIUM DUAL CORE PROCESSOR, 2.0GB RAM CNC CONTROL, SOFTWARE SOFTWARE BIESSE WRT, SOFTWARE PACKAGE HOPS, CAD FUNCTION, GRAPHICAL USER INTERFACE WITH WINDOWS NC1000. 3D SIMULATOR WITH COLLISION CHECK AT THE MACHINE WORKSTATION COMMUNICATOR FOR REMOTE CONTROL OF THE AXES TELESERVICE PACKAGE VIA SWITCH CABINET ON THE RIGHT SIDE OF THE MACHINE STAND SAFETY DEVICE SAFETY STRIPE MAT, PROTECTIVE GRID ON THE RIGHT, LEFT OF THE MACHINE. DOCUMENTATION AVAILABLE ELECTRICAL CONNECTION VALUE 40 KW MASS 9000 KG SPACE REQUIRED APPROX. (LXB) 8965 X 7600 MM (SUBJECT TO ERRORS, TECHNICAL MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Precio: 17.900 €
Ubicación: Land-; mileage [km]: 19321; power [ps]: 113; transmission: automatisch; accessories: abs; emission class: euro 2 ; MILEAGE [KM]: 19321; POWER [PS]: 113; TRANSMISSION: AUTOMATISCH; ACCESSORIES: ABS; EMISSION CLASS: EURO 2
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-high performance vertical boring mill alzmetall abomat 20
b + r control
11 amper
projection 280 mm
clamping surface: 500 x 400 mm
thread cutting performance m 22/st. 60, m 27/gg 20
drilling capacity in steel and cast iron: 30 mm diameter
spindle carrier/long spindle: mk 3
distance from spindle / table: minimum / maximum 185/685 mm
drill carriage stroke 500 mm
rpm 160-2000 rpm
feeds 28-450 mm / min
rapid traverse rate 4.5 m / min
coolant supply
year of construction 1998
weight approx. 650 kg machine height: 2195 mm
operating instructions
ce declaration
 HIGH PERFORMANCE VERTICAL BORING MILL ALZMETALL ABOMAT 20 B + R CONTROL 11 AMPER PROJECTION 280 MM CLAMPING SURFACE: 500 X 400 MM THREAD CUTTING PERFORMANCE M 22/ST. 60, M 27/GG 20 DRILLING CAPACITY IN STEEL AND CAST IRON: 30 MM DIAMETER SPINDLE CARRIER/LONG SPINDLE: MK 3 DISTANCE FROM SPINDLE / TABLE: MINIMUM / MAXIMUM 185/685 MM DRILL CARRIAGE STROKE 500 MM RPM 160-2000 RPM FEEDS 28-450 MM / MIN RAPID TRAVERSE RATE 4.5 M / MIN COOLANT SUPPLY YEAR OF CONSTRUCTION 1998 WEIGHT APPROX. 650 KG MACHINE HEIGHT: 2195 MM OPERATING INSTRUCTIONS CE DECLARATION
Vendedor: Maschinendrehpunkt
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-; transmission: sonstige; colour: grün ; TRANSMISSION: SONSTIGE; COLOUR: GRüN
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: actionica 

injection unit: .../675
screw diameter: 50 mm 
injection pressure: 2050 bar 
injection volume: 353 ccm 
shot capacity: 321 g 

clamping unit: 1600/...
clamping force: 160 t 
platen size: 715 x 715 mm 
distance between tie bars: 470 x 470 mm 
mould height: 250 mm 
opening storke: 650 mm 
max.daylight: 900 mm 
ejector stroke: 225 mm 

general information:
delivery time: now  MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: ACTIONICA INJECTION UNIT: .../675 SCREW DIAMETER: 50 MM INJECTION PRESSURE: 2050 BAR INJECTION VOLUME: 353 CCM SHOT CAPACITY: 321 G CLAMPING UNIT: 1600/... CLAMPING FORCE: 160 T PLATEN SIZE: 715 X 715 MM DISTANCE BETWEEN TIE BARS: 470 X 470 MM MOULD HEIGHT: 250 MM OPENING STORKE: 650 MM MAX.DAYLIGHT: 900 MM EJECTOR STROKE: 225 MM GENERAL INFORMATION: DELIVERY TIME: NOW
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-; mileage [km]: 632175; power [ps]: 279; gross weight [kg]: 17000; transmission: mechanisch; front tyre size: 295 / 80 r 22,5; rear tyre size: 295 / 80 r 22,5; accessories: abs, differentialsperre, ets - eletronische traktionskontrolle; colour: weiß; wheelbase: 3600; max payload [kg]: 11090; emission class: euro 2 ; MILEAGE [KM]: 632175; POWER [PS]: 279; GROSS WEIGHT [KG]: 17000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 295 / 80 R 22,5; REAR TYRE SIZE: 295 / 80 R 22,5; ACCESSORIES: ABS, DIFFERENTIALSPERRE, ETS - ELETRONISCHE TRAKTIONSKONTROLLE; COLOUR: WEIß; WHEELBASE: 3600; MAX PAYLOAD [KG]: 11090; EMISSION CLASS: EURO 2
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 200 €
Ubicación: Land-toshiba, pc-25m, 2.5mhz.

more info? write us
2hand4sale.de
say hello to TOSHIBA, PC-25M, 2.5MHZ. MORE INFO? WRITE US 2HAND4SALE.DE SAY HELLO TO
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 29.900 €
Ubicación: Land-; mileage [km]: 90110; power [ps]: 69; transmission: mechanisch; colour: beige ; MILEAGE [KM]: 90110; POWER [PS]: 69; TRANSMISSION: MECHANISCH; COLOUR: BEIGE
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
-cutting capacity 90 â° round 320 mm
-flat 350 x 300 mm
	-mitre-adjustable 90-30 â° - cutting capacity 45 â° round 260 mm
            -flat 250 x 180 mm
	-material height approx.			  	  650 mm
-band saw blade dimensions 3660 x 27 x 0,9 mm
-cutting speed m/min
	-hydr. lifting - lowering the saw frame - cut pressure continuously adjustable 15-30 kp
-material vice
-mikrosprã¼h - coolant system
-mot. chip brush
-drove to + removal roller per 2000 mm
	-total power 400 v / 3,0 kw
	-space requirement approx.	       b h 1300 x 1400 x h 1900 mm
-weight approx.					  750 kg
 TECHNICAL DATA: -CUTTING CAPACITY 90 &ACIRC;&DEG; ROUND 320 MM -FLAT 350 X 300 MM -MITRE-ADJUSTABLE 90-30 &ACIRC;&DEG; - CUTTING CAPACITY 45 &ACIRC;&DEG; ROUND 260 MM -FLAT 250 X 180 MM -MATERIAL HEIGHT APPROX. 650 MM -BAND SAW BLADE DIMENSIONS 3660 X 27 X 0,9 MM -CUTTING SPEED M/MIN -HYDR. LIFTING - LOWERING THE SAW FRAME - CUT PRESSURE CONTINUOUSLY ADJUSTABLE 15-30 KP -MATERIAL VICE -MIKROSPR&ATILDE;&FRAC14;H - COOLANT SYSTEM -MOT. CHIP BRUSH -DROVE TO + REMOVAL ROLLER PER 2000 MM -TOTAL POWER 400 V / 3,0 KW -SPACE REQUIREMENT APPROX. B H 1300 X 1400 X H 1900 MM -WEIGHT APPROX. 750 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-atraco s/s vibrating gutter with spraying unit, gutter width: 700 mm, total dimensions: 4200 mm x 1400 mm x 3100 mm. ATRACO S/S VIBRATING GUTTER WITH SPRAYING UNIT, GUTTER WIDTH: 700 MM, TOTAL DIMENSIONS: 4200 MM X 1400 MM X 3100 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-york ylcs 0350 ha

product number:m18-4321
cooling capacity:342 kw
refrigerant:r134a
refrigerant content:30 + 30 kg
voltage:400 volt
power consumption:81 kw
dimensions:3300 x 1100 x 2200 mm
weight:3100 kg
year:2006
number in stock:1 piece(s)
price:quotation request


nice water cooled york water chiller with two screw compressors distributed over two circuits. mentioned capacity at a water outlet temperature (evaporator) of +7°c and a water outlet temperature (condenser) of +35°c. with glycol: q = 180kw @ temperature water outlet (evaporator) of -10°c / temperature water outlet (condenser) of +35°c.

please also visit our website: used-refrigeration YORK YLCS 0350 HA PRODUCT NUMBER:M18-4321 COOLING CAPACITY:342 KW REFRIGERANT:R134A REFRIGERANT CONTENT:30 + 30 KG VOLTAGE:400 VOLT POWER CONSUMPTION:81 KW DIMENSIONS:3300 X 1100 X 2200 MM WEIGHT:3100 KG YEAR:2006 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST NICE WATER COOLED YORK WATER CHILLER WITH TWO SCREW COMPRESSORS DISTRIBUTED OVER TWO CIRCUITS. MENTIONED CAPACITY AT A WATER OUTLET TEMPERATURE (EVAPORATOR) OF +7°C AND A WATER OUTLET TEMPERATURE (CONDENSER) OF +35°C. WITH GLYCOL: Q = 180KW @ TEMPERATURE WATER OUTLET (EVAPORATOR) OF -10°C / TEMPERATURE WATER OUTLET (CONDENSER) OF +35°C. PLEASE ALSO VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 13,0 mm<br/>thickness at niro-steel: 8,0 mm<br/>engine output: 22,0 kw<br/>down holder: 17 stück<br/>number of strokes - loaded: 17 h/min.<br/>cutting angle: 1 - 3 °<br/>oil volume: 340 ltr.<br/>weight: 12.500 kg<br/>range l-w-h: 3.950 x 2.400 x 2.210 mm<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 13,0 MM
THICKNESS AT NIRO-STEEL: 8,0 MM
ENGINE OUTPUT: 22,0 KW
DOWN HOLDER: 17 STüCK
NUMBER OF STROKES - LOADED: 17 H/MIN.
CUTTING ANGLE: 1 - 3 °
OIL VOLUME: 340 LTR.
WEIGHT: 12.500 KG
RANGE L-W-H: 3.950 X 2.400 X 2.210 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-machine no. 68775 speed max x = 80 m / min; y = 60 m / min; z = 20 m / min
traverse path z-axis = 325 mm maximum workpiece passage at z = 170 mm traverse path z-axis with 5-axis unit of work = 430 mm max workpiece forward in z = 200 mm ft x-3130 mm work table; y = 2200 mm
change field layout divided into 2 areas of work and 2 x clamping areas
blower for air cushion table processing unit / main spindle with 5 interpolating axes 11 kw with hsk f63 adapter, liquid cooling
blowing device with 4 nozzles for electro-spindle c - axis 360 â° endless
b - axis position axis +/-100 â°
drill head bra 17 l 1 motor with inverter 1.7 kw at 2800 rpm - 3 kw at 6000 rpm
10 individually accessible vertical spindle 5 in x and y direction in the grid 5 32 mm
3 horizontal spindle with double output 2 in x and y direction in the grid 1 32 mm
nutsã¤ge in x direction, diameter 120 mm, depth of cut 25 mm
turret tool magazine 16 courses with driving in the x direction
control function remote control all main functions for the set-up of the working area, as well as the placement of the processing unit and the tool changer. 
werkstã¼ck-unloading belt positioned on the right side of l = 3600 mm with work table l = 3100 mm
sweeper arm device for nestingmaschinen
is the automatic discharge of the machine while cleaning the victim panel

vacuum system for 3 vacuum pumps 300 mâ³/h
chips integrated conveyor belt in the machine bed
automatic lubrication control nc hops 6.0 machine license, 5 axis of biesseworks, biessenest guard floor mat/guard location: stuttgart
available 01.03.2019

(errors and omissions in the technical data as well as subject to prior sale)

MACHINE NO. 68775 SPEED MAX X = 80 M / MIN; Y = 60 M / MIN; Z = 20 M / MIN TRAVERSE PATH Z-AXIS = 325 MM MAXIMUM WORKPIECE PASSAGE AT Z = 170 MM TRAVERSE PATH Z-AXIS WITH 5-AXIS UNIT OF WORK = 430 MM MAX WORKPIECE FORWARD IN Z = 200 MM FT X-3130 MM WORK TABLE; Y = 2200 MM CHANGE FIELD LAYOUT DIVIDED INTO 2 AREAS OF WORK AND 2 X CLAMPING AREAS BLOWER FOR AIR CUSHION TABLE PROCESSING UNIT / MAIN SPINDLE WITH 5 INTERPOLATING AXES 11 KW WITH HSK F63 ADAPTER, LIQUID COOLING BLOWING DEVICE WITH 4 NOZZLES FOR ELECTRO-SPINDLE C - AXIS 360 &ACIRC;&DEG; ENDLESS B - AXIS POSITION AXIS +/-100 &ACIRC;&DEG; DRILL HEAD BRA 17 L 1 MOTOR WITH INVERTER 1.7 KW AT 2800 RPM - 3 KW AT 6000 RPM 10 INDIVIDUALLY ACCESSIBLE VERTICAL SPINDLE 5 IN X AND Y DIRECTION IN THE GRID 5 32 MM 3 HORIZONTAL SPINDLE WITH DOUBLE OUTPUT 2 IN X AND Y DIRECTION IN THE GRID 1 32 MM NUTS&ATILDE;&CURREN;GE IN X DIRECTION, DIAMETER 120 MM, DEPTH OF CUT 25 MM TURRET TOOL MAGAZINE 16 COURSES WITH DRIVING IN THE X DIRECTION CONTROL FUNCTION REMOTE CONTROL ALL MAIN FUNCTIONS FOR THE SET-UP OF THE WORKING AREA, AS WELL AS THE PLACEMENT OF THE PROCESSING UNIT AND THE TOOL CHANGER. WERKST&ATILDE;&FRAC14;CK-UNLOADING BELT POSITIONED ON THE RIGHT SIDE OF L = 3600 MM WITH WORK TABLE L = 3100 MM SWEEPER ARM DEVICE FOR NESTINGMASCHINEN IS THE AUTOMATIC DISCHARGE OF THE MACHINE WHILE CLEANING THE VICTIM PANEL VACUUM SYSTEM FOR 3 VACUUM PUMPS 300 M&ACIRC;&SUP3;/H CHIPS INTEGRATED CONVEYOR BELT IN THE MACHINE BED AUTOMATIC LUBRICATION CONTROL NC HOPS 6.0 MACHINE LICENSE, 5 AXIS OF BIESSEWORKS, BIESSENEST GUARD FLOOR MAT/GUARD LOCATION: STUTTGART AVAILABLE 01.03.2019 (ERRORS AND OMISSIONS IN THE TECHNICAL DATA AS WELL AS SUBJECT TO PRIOR SALE)
Vendedor: GROMAR Mariola Groyecki
Año de construcción: usado
Ubicación: Land-weight approx.: 25 kg<br/>dimensions (l x w x h) approx.: 400 x 400 x 400 mm<br/>description: benz forte c lock case milling aggregate for biesse cnc with hsk 63f.<br> (collets are not included!) WEIGHT APPROX.: 25 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 400 X 400 MM
DESCRIPTION: BENZ FORTE C LOCK CASE MILLING AGGREGATE FOR BIESSE CNC WITH HSK 63F.
(COLLETS ARE NOT INCLUDED!)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc machining center biesse, type: rover a 2231 g ft, year of construction: 2012
5-axis nesting-cnc machine machines no. 68773
working speed maximum x = 80 m / min; y = 60 m / min; z = 20 m / min
traverse path z-axis = 325 mm maximum workpiece passage at z = 170 mm traverse path z-axis with 5-axis unit of work = 430 mm max workpiece forward in z = 200 mm ft x-3130 mm work table; y = 2200 mm
change field layout divided into 2 areas of work and 2 x clamping areas
blower for air cushion table processing unit / main spindle with 5 interpolating axes 11 kw with hsk f63 adapter, liquid cooling
blowing device with 4 nozzles for electro-spindle c - axis 360 â° endless
b - axis position axis +/-100 â°
drill head bra 17 l 1 motor with inverter 1.7 kw at 2800 rpm - 3 kw at 6000 rpm
10 individually accessible vertical spindle 5 in x and y direction in the grid 5 32 mm
3 horizontal spindle with double output 2 in x and y direction in the grid 1 32 mm
nutsã¤ge in x direction, diameter 120 mm, depth of cut 25 mm
turret tool magazine 16 courses with driving in the x direction
control function remote control all main functions for the set-up of the working area, as well as the placement of the processing unit and the tool changer. 
werkstã¼ck-unloading belt positioned on the right side of l = 3600 mm with work table l = 3100 mm
sweeper arm device for nestingmaschinen
is the automatic discharge of the machine while cleaning the victim panel

vacuum system for 3 vacuum pumps 300 mâ³/h
chips integrated conveyor belt in the machine bed
automatic lubrication control nc hops 6.0 machine license, 5 axis of biesseworks, biessenest guard floor mat/guards (errors and omissions in the technical data as well as subject to prior sale)

CNC MACHINING CENTER BIESSE, TYPE: ROVER A 2231 G FT, YEAR OF CONSTRUCTION: 2012 5-AXIS NESTING-CNC MACHINE MACHINES NO. 68773 WORKING SPEED MAXIMUM X = 80 M / MIN; Y = 60 M / MIN; Z = 20 M / MIN TRAVERSE PATH Z-AXIS = 325 MM MAXIMUM WORKPIECE PASSAGE AT Z = 170 MM TRAVERSE PATH Z-AXIS WITH 5-AXIS UNIT OF WORK = 430 MM MAX WORKPIECE FORWARD IN Z = 200 MM FT X-3130 MM WORK TABLE; Y = 2200 MM CHANGE FIELD LAYOUT DIVIDED INTO 2 AREAS OF WORK AND 2 X CLAMPING AREAS BLOWER FOR AIR CUSHION TABLE PROCESSING UNIT / MAIN SPINDLE WITH 5 INTERPOLATING AXES 11 KW WITH HSK F63 ADAPTER, LIQUID COOLING BLOWING DEVICE WITH 4 NOZZLES FOR ELECTRO-SPINDLE C - AXIS 360 &ACIRC;&DEG; ENDLESS B - AXIS POSITION AXIS +/-100 &ACIRC;&DEG; DRILL HEAD BRA 17 L 1 MOTOR WITH INVERTER 1.7 KW AT 2800 RPM - 3 KW AT 6000 RPM 10 INDIVIDUALLY ACCESSIBLE VERTICAL SPINDLE 5 IN X AND Y DIRECTION IN THE GRID 5 32 MM 3 HORIZONTAL SPINDLE WITH DOUBLE OUTPUT 2 IN X AND Y DIRECTION IN THE GRID 1 32 MM NUTS&ATILDE;&CURREN;GE IN X DIRECTION, DIAMETER 120 MM, DEPTH OF CUT 25 MM TURRET TOOL MAGAZINE 16 COURSES WITH DRIVING IN THE X DIRECTION CONTROL FUNCTION REMOTE CONTROL ALL MAIN FUNCTIONS FOR THE SET-UP OF THE WORKING AREA, AS WELL AS THE PLACEMENT OF THE PROCESSING UNIT AND THE TOOL CHANGER. WERKST&ATILDE;&FRAC14;CK-UNLOADING BELT POSITIONED ON THE RIGHT SIDE OF L = 3600 MM WITH WORK TABLE L = 3100 MM SWEEPER ARM DEVICE FOR NESTINGMASCHINEN IS THE AUTOMATIC DISCHARGE OF THE MACHINE WHILE CLEANING THE VICTIM PANEL VACUUM SYSTEM FOR 3 VACUUM PUMPS 300 M&ACIRC;&SUP3;/H CHIPS INTEGRATED CONVEYOR BELT IN THE MACHINE BED AUTOMATIC LUBRICATION CONTROL NC HOPS 6.0 MACHINE LICENSE, 5 AXIS OF BIESSEWORKS, BIESSENEST GUARD FLOOR MAT/GUARDS (ERRORS AND OMISSIONS IN THE TECHNICAL DATA AS WELL AS SUBJECT TO PRIOR SALE)
Vendedor: GROMAR Mariola Groyecki
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-; gross weight [kg]: 1312; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 1312; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-code: 0312
brand: biesse
model: akron 850 - ce standard 

automatic, single-sided edge banding machine for application of wood edges, veneer, abs, melaminic, pvc, and other materials - ce standard

thickness of edge-banding material in rolls mm 0,4 / 3
thickness of edge-banding material in strips 0,4 / 15
panel height mm 10 / 60
min panel lenght mm 140
min panel width mm 50
chain feed speed mt/min 10 / 14 / 20

composition:
numerical control cni with colour graphic display
pre-milling unit,  it carries out pre-milling of the panel using large diameter mills mounted on 2 independent , high frequency motors of 1800 watt each
auto/set device
gluing unit glue pot
pressing of the applied edge with 6 press rollers with pneumatic control
end trimming unit fitted with 2 independent motors
tilting bevelling unit equipped with 8 numeric indicators – 2 motors 1800 watt each
multi-function rounding unit pneumatic work change equipped with 2 high frequency motors 0,65 kw each
multi-function edge scraper unit with revolving disc copiers, rapid adjustment with 8 mechanical numeric indicators
glue scraper unit
brush unit for edge cleaning and polishing
phon unit for color reactivation
pneumatic connection bar 7
overall dimensions : mm 6500 x 1600 x 1800
weight kg 3200



 CODE: 0312 BRAND: BIESSE MODEL: AKRON 850 - CE STANDARD AUTOMATIC, SINGLE-SIDED EDGE BANDING MACHINE FOR APPLICATION OF WOOD EDGES, VENEER, ABS, MELAMINIC, PVC, AND OTHER MATERIALS - CE STANDARD THICKNESS OF EDGE-BANDING MATERIAL IN ROLLS MM 0,4 / 3 THICKNESS OF EDGE-BANDING MATERIAL IN STRIPS 0,4 / 15 PANEL HEIGHT MM 10 / 60 MIN PANEL LENGHT MM 140 MIN PANEL WIDTH MM 50 CHAIN FEED SPEED MT/MIN 10 / 14 / 20 COMPOSITION: NUMERICAL CONTROL CNI WITH COLOUR GRAPHIC DISPLAY PRE-MILLING UNIT, IT CARRIES OUT PRE-MILLING OF THE PANEL USING LARGE DIAMETER MILLS MOUNTED ON 2 INDEPENDENT , HIGH FREQUENCY MOTORS OF 1800 WATT EACH AUTO/SET DEVICE GLUING UNIT GLUE POT PRESSING OF THE APPLIED EDGE WITH 6 PRESS ROLLERS WITH PNEUMATIC CONTROL END TRIMMING UNIT FITTED WITH 2 INDEPENDENT MOTORS TILTING BEVELLING UNIT EQUIPPED WITH 8 NUMERIC INDICATORS – 2 MOTORS 1800 WATT EACH MULTI-FUNCTION ROUNDING UNIT PNEUMATIC WORK CHANGE EQUIPPED WITH 2 HIGH FREQUENCY MOTORS 0,65 KW EACH MULTI-FUNCTION EDGE SCRAPER UNIT WITH REVOLVING DISC COPIERS, RAPID ADJUSTMENT WITH 8 MECHANICAL NUMERIC INDICATORS GLUE SCRAPER UNIT BRUSH UNIT FOR EDGE CLEANING AND POLISHING PHON UNIT FOR COLOR REACTIVATION PNEUMATIC CONNECTION BAR 7 OVERALL DIMENSIONS : MM 6500 X 1600 X 1800 WEIGHT KG 3200
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-sheet width: 6200 mm<br/>plate thickness: 4,0 mm<br/>plate thickness: 3,0 edelstahl mm<br/>down holder:  <br/>no. of strokes:  hub/min<br/>control: 850 elgo<br/>total power requirement:  kw<br/>range l-w-h:  mm<br/>weight:  kg<br/><br/><br/><br/><br/> SHEET WIDTH: 6200 MM
PLATE THICKNESS: 4,0 MM
PLATE THICKNESS: 3,0 EDELSTAHL MM
DOWN HOLDER:
NO. OF STROKES: HUB/MIN
CONTROL: 850 ELGO
TOTAL POWER REQUIREMENT: KW
RANGE L-W-H: MM
WEIGHT: KG




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-code: 0501
brand: comil biesse
model: cosmo nk

self-adjusting clamp press for furniture 

working length mm 2500
working height mm 1200
working width 700 mm
positioning speed 3,5 mt/min
total power kw 3,7
overall dimensions: mm 3760 x 920 x 2280
weight kg 2200


 CODE: 0501 BRAND: COMIL BIESSE MODEL: COSMO NK SELF-ADJUSTING CLAMP PRESS FOR FURNITURE WORKING LENGTH MM 2500 WORKING HEIGHT MM 1200 WORKING WIDTH 700 MM POSITIONING SPEED 3,5 MT/MIN TOTAL POWER KW 3,7 OVERALL DIMENSIONS: MM 3760 X 920 X 2280 WEIGHT KG 2200
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-sheet width: 3200 mm<br/>plate thickness: 1,20 mm<br/>daylight opening: 120 mm<br/>back stop - adjustable: 10 - 750 mm<br/>bending angle max.: 150 °<br/>total power requirement: manuell <br/>weight of the machine ca.: 1750 kg.<br/>dimensions of the machine ca.: 4110 x 1415 x 1220 mm<br/><br/><br/><br/><br/> SHEET WIDTH: 3200 MM
PLATE THICKNESS: 1,20 MM
DAYLIGHT OPENING: 120 MM
BACK STOP - ADJUSTABLE: 10 - 750 MM
BENDING ANGLE MAX.: 150 °
TOTAL POWER REQUIREMENT: MANUELL
WEIGHT OF THE MACHINE CA.: 1750 KG.
DIMENSIONS OF THE MACHINE CA.: 4110 X 1415 X 1220 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-
article number: ma1064
manufacturer: hermle
type: h6 / 2 k
year: circa 1970
machine number: 3211
length [mm]: 900
width [mm]: 700
height [mm]: 1500
weight [kg]: 560
power supply: 380 v
gear [rpm]: 900-10000
lxw table size: 520 x 175
left/right rotation: yes ARTICLE NUMBER: MA1064 MANUFACTURER: HERMLE TYPE: H6 / 2 K YEAR: CIRCA 1970 MACHINE NUMBER: 3211 LENGTH [MM]: 900 WIDTH [MM]: 700 HEIGHT [MM]: 1500 WEIGHT [KG]: 560 POWER SUPPLY: 380 V GEAR [RPM]: 900-10000 LXW TABLE SIZE: 520 X 175 LEFT/RIGHT ROTATION: YES
Vendedor: Ulrich Müller Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 12,0 mm / st<br/>plate thickness: 7,0 mm / va<br/>no. of strokes: 7 - 17 hub/min<br/>down holder: 18 stück<br/>cutting angle: 0,5 - 3,0 °<br/>work height max.: 900 mm<br/>back stop - adjustable: 1000 mm<br/>weight: 8,8 t<br/>range l-w-h: 3800x2030x2030 mm<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 12,0 MM / ST
PLATE THICKNESS: 7,0 MM / VA
NO. OF STROKES: 7 - 17 HUB/MIN
DOWN HOLDER: 18 STüCK
CUTTING ANGLE: 0,5 - 3,0 °
WORK HEIGHT MAX.: 900 MM
BACK STOP - ADJUSTABLE: 1000 MM
WEIGHT: 8,8 T
RANGE L-W-H: 3800X2030X2030 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-description
this is a used ve-50 aerator mixing machine from mondomix with a working capacity of between 1000 - 3000 litres per hour. the machine can be used for the continuous mixing and aerating of different types of marshmallow, batters, fillings and foams. the mousse product can range from light and fluffy to creamy and thick, depending on preparation techniques. dessert mousses are typically made with whipped egg whites or whipped cream, flavored with chocolate, coffee, caramel, pureed fruits or various herbs and spices, such as mint or vanilla. 

features           
•manufacturer: mondomix 
•model: ve-50
•function: aerator / creaming machine 
•capacity: 1.000 - 3.000 litres / per hour
•serial number: p13212 
•year of manufacture: 1998
•max. working pressure: 10 bar 
•total installed power: 20 kw
•electrics: 400v / 3phase / 50hz
•stainless steel construction 

country of manufacture                
•netherlands


  DESCRIPTION THIS IS A USED VE-50 AERATOR MIXING MACHINE FROM MONDOMIX WITH A WORKING CAPACITY OF BETWEEN 1000 - 3000 LITRES PER HOUR. THE MACHINE CAN BE USED FOR THE CONTINUOUS MIXING AND AERATING OF DIFFERENT TYPES OF MARSHMALLOW, BATTERS, FILLINGS AND FOAMS. THE MOUSSE PRODUCT CAN RANGE FROM LIGHT AND FLUFFY TO CREAMY AND THICK, DEPENDING ON PREPARATION TECHNIQUES. DESSERT MOUSSES ARE TYPICALLY MADE WITH WHIPPED EGG WHITES OR WHIPPED CREAM, FLAVORED WITH CHOCOLATE, COFFEE, CARAMEL, PUREED FRUITS OR VARIOUS HERBS AND SPICES, SUCH AS MINT OR VANILLA. FEATURES •MANUFACTURER: MONDOMIX •MODEL: VE-50 •FUNCTION: AERATOR / CREAMING MACHINE •CAPACITY: 1.000 - 3.000 LITRES / PER HOUR •SERIAL NUMBER: P13212 •YEAR OF MANUFACTURE: 1998 •MAX. WORKING PRESSURE: 10 BAR •TOTAL INSTALLED POWER: 20 KW •ELECTRICS: 400V / 3PHASE / 50HZ •STAINLESS STEEL CONSTRUCTION COUNTRY OF MANUFACTURE •NETHERLANDS
Vendedor: Machinery World Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 1200 mm<br/>description: machine number 34777, 2800 rpm, grinding disc diameter max. 125 mm, with base frame WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 1200 MM
DESCRIPTION: MACHINE NUMBER 34777, 2800 RPM, GRINDING DISC DIAMETER MAX. 125 MM, WITH BASE FRAME
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)