20 ofertas

Año de construcción: usado
Ubicación: Land-cutting machine
cutting width 76 cm
1995
airtable
light barrier
programmable
spare knife
black and white backlit display CUTTING MACHINE CUTTING WIDTH 76 CM 1995 AIRTABLE LIGHT BARRIER PROGRAMMABLE SPARE KNIFE BLACK AND WHITE BACKLIT DISPLAY
Vendedor: CUTECMA e.K
Año de construcción: usado
Ubicación: Land-material stainless steel, capacity unknown, with motor 37,0 kw, 230/400 volt, inlet dia. 190mm, flange dia. 340mm, outlet dia. 190mm, flange dia. 340mm, mounted on frame, floorspace 2,7x0,7 m, total height 1,1 m, weight 1700 kg, extra specifications - pump speed approx. 405 rpmpumpspumps > pumps MATERIAL STAINLESS STEEL, CAPACITY UNKNOWN, WITH MOTOR 37,0 KW, 230/400 VOLT, INLET DIA. 190MM, FLANGE DIA. 340MM, OUTLET DIA. 190MM, FLANGE DIA. 340MM, MOUNTED ON FRAME, FLOORSPACE 2,7X0,7 M, TOTAL HEIGHT 1,1 M, WEIGHT 1700 KG, EXTRA SPECIFICATIONS - PUMP SPEED APPROX. 405 RPMPUMPSPUMPS > PUMPS
Vendedor: Foeth
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-contagor 470

the contagor 470 is an off-line rotary numbering machine with a high impression quality and precise registration. this machine can number, perforate, score or semi-slit (over self-adhesive paper) simultaneously.  with speeds of up to 5300 sheets or multipart sets per hour it gives an unmatched level of productivity.
the contact between numbering head and paper over the heavy duty polyurethane cover roller ensures clear definition, even on multipart sets, this eliminates the deflection which causes shadowing on impact numbering systems.
the inking numbering system has interchangeable rollers for normal offset ink or removable preinked rollers (available in black and red).
easy to operate, the control panel is located on the operator side, and has several functions, including opto electronic failure sheet feed detector for
mistakes or doubles.
key features:
• programmable software
• digital control panel
• double sheet detection
• production programming
• up to 20 numbering heads
• automatic number repetition
• controlled numbering sequence
• works with card, glossy paper, ncr sets (up to 5 part)
specification:
• paper feed weights - 45 - 250gr./m2
• maximum paper size - 470mm x 420mm
• minimum paper size - 115mm x 185mm
• up to 5,500 sheets per hour
• minimum distance between wheels - 12mm
  CONTAGOR 470 THE CONTAGOR 470 IS AN OFF-LINE ROTARY NUMBERING MACHINE WITH A HIGH IMPRESSION QUALITY AND PRECISE REGISTRATION. THIS MACHINE CAN NUMBER, PERFORATE, SCORE OR SEMI-SLIT (OVER SELF-ADHESIVE PAPER) SIMULTANEOUSLY. WITH SPEEDS OF UP TO 5300 SHEETS OR MULTIPART SETS PER HOUR IT GIVES AN UNMATCHED LEVEL OF PRODUCTIVITY. THE CONTACT BETWEEN NUMBERING HEAD AND PAPER OVER THE HEAVY DUTY POLYURETHANE COVER ROLLER ENSURES CLEAR DEFINITION, EVEN ON MULTIPART SETS, THIS ELIMINATES THE DEFLECTION WHICH CAUSES SHADOWING ON IMPACT NUMBERING SYSTEMS. THE INKING NUMBERING SYSTEM HAS INTERCHANGEABLE ROLLERS FOR NORMAL OFFSET INK OR REMOVABLE PREINKED ROLLERS (AVAILABLE IN BLACK AND RED). EASY TO OPERATE, THE CONTROL PANEL IS LOCATED ON THE OPERATOR SIDE, AND HAS SEVERAL FUNCTIONS, INCLUDING OPTO ELECTRONIC FAILURE SHEET FEED DETECTOR FOR MISTAKES OR DOUBLES. KEY FEATURES: • PROGRAMMABLE SOFTWARE • DIGITAL CONTROL PANEL • DOUBLE SHEET DETECTION • PRODUCTION PROGRAMMING • UP TO 20 NUMBERING HEADS • AUTOMATIC NUMBER REPETITION • CONTROLLED NUMBERING SEQUENCE • WORKS WITH CARD, GLOSSY PAPER, NCR SETS (UP TO 5 PART) SPECIFICATION: • PAPER FEED WEIGHTS - 45 - 250GR./M2 • MAXIMUM PAPER SIZE - 470MM X 420MM • MINIMUM PAPER SIZE - 115MM X 185MM • UP TO 5,500 SHEETS PER HOUR • MINIMUM DISTANCE BETWEEN WHEELS - 12MM
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2600 mm<br/>description: 24 stacking chairs in blue-black. total available quantity: 1,500 ea. please contact us in case you require more units. WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2600 MM
DESCRIPTION: 24 STACKING CHAIRS IN BLUE-BLACK. TOTAL AVAILABLE QUANTITY: 1,500 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mb trac 1000, ez 1985, om 352, 4wd, cab, front linkage, front pto, air - no connections rear 3dw stg, return line, rule hydraulics, ber.: 16.9r26, new gearbox, with new trailer hitch, top front and rear. unit frame, foldable rear window, reborrowed tã?v, inspection, tires new front, olive green and black with painted MB TRAC 1000, EZ 1985, OM 352, 4WD, CAB, FRONT LINKAGE, FRONT PTO, AIR - NO CONNECTIONS REAR 3DW STG, RETURN LINE, RULE HYDRAULICS, BER.: 16.9R26, NEW GEARBOX, WITH NEW TRAILER HITCH, TOP FRONT AND REAR. UNIT FRAME, FOLDABLE REAR WINDOW, REBORROWED T&ATILDE;?V, INSPECTION, TIRES NEW FRONT, OLIVE GREEN AND BLACK WITH PAINTED
Vendedor: Günter Sieben Landtechnik
Año de construcción: usado
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2000 mm<br/>description: 12 stacking chairs in blue-black. total available quantity: 1,500 ea. please contact us in case you require more units. WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2000 MM
DESCRIPTION: 12 STACKING CHAIRS IN BLUE-BLACK. TOTAL AVAILABLE QUANTITY: 1,500 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction 1980/1994/2012

band width 2.050 mm
band thickness 2,50 - 10,00 mm
coil weight max. 30,0/18,0 t
coil inside diameter - decoiler 508 / 610 / 760 mm
coil outside diameter - decoiler 2.000 mm
coil inside diameter - recoiler 610 mm
coil outside diameter - recoiler 1.800 mm
working speed 6-75 m / min.
working direction right - left
space requirement (l x w)
line consisting of:
coil car under floor
decoiler
construction 2-side decoiler
expanding hydraulically
decoiler movable on base frame
driver / leveler unit with mounted
coil opener
cutting shear (crop shear) with conveyor table
shear stand manufacturer novastilmec
knife shaft diameter 300 mm
knife diameter 420 mm
power 120 kw
tooling change unit 4 arms
manufacturer novastilmec
conveyor table with looping pit - entry
conveyor table with looping pit - run out
scrap winder 2 pieces
power 2 x 23 kw
brake stand with pre-separating
coil car
recoiler with counter bearing
construction mandrel
expanding hydraulically
shifting device hydraulically
min. band width (thickness up to 5,0 mm) 45 mm - pickled
45,5 mm - black
min. band width (6,0 mm) 60 mm
min. band width (8,0 mm) 80 mm
max. weight of wrapped coils 18,0 t
inner diameter of coils 610 mm
max. outside diameter of wrapped coils 1.800 mm
separator arm hydraulically
power 160 kw
turnstile 2 arms
hydraulic
electric
tools

no. of cuts:
with tensile strength max. 450 n / mm²
material thickness number of strips coil width
3,00 mm 16 1.501 - 2.000 mm
5,00 mm 13 1.501 - 2.000 mm
8,00 mm  5 1.501 - 2.000 mm
10,00 mm 3 1.501 - 2.000 mm

with tensile strength max. 630 n / mm²
material thickness no. of strips coil width
3,00 mm 16 1.501 - 2.000 mm
5,00 mm 10 1.501 - 2.000 mm
8,00 mm  5 1.501 - 2.000 mm

with tensile strength max. 700 n / mm²
material thickness no. of strips coil width
3,00 mm 16 1.501 - 2.000 mm
5,00 mm 11 1.501 - 2.000 mm  YEAR OF CONSTRUCTION 1980/1994/2012 BAND WIDTH 2.050 MM BAND THICKNESS 2,50 - 10,00 MM COIL WEIGHT MAX. 30,0/18,0 T COIL INSIDE DIAMETER - DECOILER 508 / 610 / 760 MM COIL OUTSIDE DIAMETER - DECOILER 2.000 MM COIL INSIDE DIAMETER - RECOILER 610 MM COIL OUTSIDE DIAMETER - RECOILER 1.800 MM WORKING SPEED 6-75 M / MIN. WORKING DIRECTION RIGHT - LEFT SPACE REQUIREMENT (L X W) LINE CONSISTING OF: COIL CAR UNDER FLOOR DECOILER CONSTRUCTION 2-SIDE DECOILER EXPANDING HYDRAULICALLY DECOILER MOVABLE ON BASE FRAME DRIVER / LEVELER UNIT WITH MOUNTED COIL OPENER CUTTING SHEAR (CROP SHEAR) WITH CONVEYOR TABLE SHEAR STAND MANUFACTURER NOVASTILMEC KNIFE SHAFT DIAMETER 300 MM KNIFE DIAMETER 420 MM POWER 120 KW TOOLING CHANGE UNIT 4 ARMS MANUFACTURER NOVASTILMEC CONVEYOR TABLE WITH LOOPING PIT - ENTRY CONVEYOR TABLE WITH LOOPING PIT - RUN OUT SCRAP WINDER 2 PIECES POWER 2 X 23 KW BRAKE STAND WITH PRE-SEPARATING COIL CAR RECOILER WITH COUNTER BEARING CONSTRUCTION MANDREL EXPANDING HYDRAULICALLY SHIFTING DEVICE HYDRAULICALLY MIN. BAND WIDTH (THICKNESS UP TO 5,0 MM) 45 MM - PICKLED 45,5 MM - BLACK MIN. BAND WIDTH (6,0 MM) 60 MM MIN. BAND WIDTH (8,0 MM) 80 MM MAX. WEIGHT OF WRAPPED COILS 18,0 T INNER DIAMETER OF COILS 610 MM MAX. OUTSIDE DIAMETER OF WRAPPED COILS 1.800 MM SEPARATOR ARM HYDRAULICALLY POWER 160 KW TURNSTILE 2 ARMS HYDRAULIC ELECTRIC TOOLS NO. OF CUTS: WITH TENSILE STRENGTH MAX. 450 N / MM² MATERIAL THICKNESS NUMBER OF STRIPS COIL WIDTH 3,00 MM 16 1.501 - 2.000 MM 5,00 MM 13 1.501 - 2.000 MM 8,00 MM 5 1.501 - 2.000 MM 10,00 MM 3 1.501 - 2.000 MM WITH TENSILE STRENGTH MAX. 630 N / MM² MATERIAL THICKNESS NO. OF STRIPS COIL WIDTH 3,00 MM 16 1.501 - 2.000 MM 5,00 MM 10 1.501 - 2.000 MM 8,00 MM 5 1.501 - 2.000 MM WITH TENSILE STRENGTH MAX. 700 N / MM² MATERIAL THICKNESS NO. OF STRIPS COIL WIDTH 3,00 MM 16 1.501 - 2.000 MM 5,00 MM 11 1.501 - 2.000 MM
Vendedor: Reinhold Schmitt GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2600 mm<br/>description: 24 stacking chairs in silver-black. total available quantity: approx. 370 ea. please contact us in case you require more units. WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2600 MM
DESCRIPTION: 24 STACKING CHAIRS IN SILVER-BLACK. TOTAL AVAILABLE QUANTITY: APPROX. 370 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-the printer is in excellent as new condition. it is still under power in print shop.

totalizers read:

0.2 mio. for black and white
0.5 mio for color prints

the copier printer is also still on service contract, with fiery color print server and windows based fiery rip.

can ship worldwide. THE PRINTER IS IN EXCELLENT AS NEW CONDITION. IT IS STILL UNDER POWER IN PRINT SHOP. TOTALIZERS READ: 0.2 MIO. FOR BLACK AND WHITE 0.5 MIO FOR COLOR PRINTS THE COPIER PRINTER IS ALSO STILL ON SERVICE CONTRACT, WITH FIERY COLOR PRINT SERVER AND WINDOWS BASED FIERY RIP. CAN SHIP WORLDWIDE.
Vendedor: TISKSTROJ - CORUM
Año de construcción: usado
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2000 mm<br/>description: 12 stacking chairs in silver-black. total available quantity: approx. 370 ea. please contact us in case you require more units. WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2000 MM
DESCRIPTION: 12 STACKING CHAIRS IN SILVER-BLACK. TOTAL AVAILABLE QUANTITY: APPROX. 370 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-this listing is for 1 of 5, 2005 10 tonne capacity vertical ink storage vessels, 4m height steel shell, 1.8m diameter 
1. 1 x black
2. 1 x black
3. 1 x red 
4. 1 x blue
5. 1 x yellow
used previosuly for newspapers and magazines.
 THIS LISTING IS FOR 1 OF 5, 2005 10 TONNE CAPACITY VERTICAL INK STORAGE VESSELS, 4M HEIGHT STEEL SHELL, 1.8M DIAMETER 1. 1 X BLACK 2. 1 X BLACK 3. 1 X RED 4. 1 X BLUE 5. 1 X YELLOW USED PREVIOSULY FOR NEWSPAPERS AND MAGAZINES.
Vendedor: PostIndustry
Año de construcción: usado
Precio: used machinery auction RESALE 96 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2000 mm<br/>description: 12 stacking chairs in silver-black. total available quantity: approx. 370 ea. please contact us in case you require more units. WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2000 MM
DESCRIPTION: 12 STACKING CHAIRS IN SILVER-BLACK. TOTAL AVAILABLE QUANTITY: APPROX. 370 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: epson
model: gs 6000 2 devices
years: 2011 and 2012
equipments:
available: now
defects: in one machine the black printhead weakens
location: germany
price: on request MANUFACTURER: EPSON MODEL: GS 6000 2 DEVICES YEARS: 2011 AND 2012 EQUIPMENTS: AVAILABLE: NOW DEFECTS: IN ONE MACHINE THE BLACK PRINTHEAD WEAKENS LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Precio: used machinery auction RESALE 192 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2600 mm<br/>description: 24 stacking chairs in silver-black. total available quantity: approx. 370 ea. please contact us in case you require more units. WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2600 MM
DESCRIPTION: 24 STACKING CHAIRS IN SILVER-BLACK. TOTAL AVAILABLE QUANTITY: APPROX. 370 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: xerox 
model: dc 700
equipment: 
large feeder (6 oversize), smoothing unit, stacker with cart (hcs stacker), feeder scanner.
defect: no defects, maintenance contract until 12. 2016, in production
availability: now, consumables available
counter: color 5017859, black 535739, total 5553598
accessories, wear parts:
fuser: 2x
copybox fb: 13x
copybox s: 4x
toner: 4x yellow, 3x cyan, 3x magenta, 0x black
staple units (we have no stapler on it): 7x
waste toner container: 1x
the machine is fully equipped and ready for use.
location: germany
price: on request MANUFACTURER: XEROX MODEL: DC 700 EQUIPMENT: LARGE FEEDER (6 OVERSIZE), SMOOTHING UNIT, STACKER WITH CART (HCS STACKER), FEEDER SCANNER. DEFECT: NO DEFECTS, MAINTENANCE CONTRACT UNTIL 12. 2016, IN PRODUCTION AVAILABILITY: NOW, CONSUMABLES AVAILABLE COUNTER: COLOR 5017859, BLACK 535739, TOTAL 5553598 ACCESSORIES, WEAR PARTS: FUSER: 2X COPYBOX FB: 13X COPYBOX S: 4X TONER: 4X YELLOW, 3X CYAN, 3X MAGENTA, 0X BLACK STAPLE UNITS (WE HAVE NO STAPLER ON IT): 7X WASTE TONER CONTAINER: 1X THE MACHINE IS FULLY EQUIPPED AND READY FOR USE. LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Precio: used machinery auction RESALE 96 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2000 mm<br/>description: 12 stacking chairs in blue-black. total available quantity: 1,500 ea. please contact us in case you require more units. WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2000 MM
DESCRIPTION: 12 STACKING CHAIRS IN BLUE-BLACK. TOTAL AVAILABLE QUANTITY: 1,500 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-microsteppls1200130 plasma fire-cutter 

year: 2006
plasma source: hypertherm hpr260
control unit: micro stepmsn500
work surface: 12 x 3 m
filter unit is not included. 
counter read: 27.623 hours
max. plate thickness: 50 mm
provided with fuses cabinet provided with main switch.
dimensions: 4.554 x 14.100 x 1.800 mm
x-axle: up to 12,000 mm
y-axle max.: 3000 mm
z-axle, max: 50 mm

max. dim. workpiece:
x: 12,800 mm
y: 3.000 mm
black: 50 mm

maximum material, thickness:
steel: 40 mm
stainless steel: 35 mm
frame: 35 mm

power: 380 volt, 70 kva

this is an online auction: more info and bidding via this url: abcs://abc.moyersoen-auctions.com/lot/2192097/15122/
 MICROSTEPPLS1200130 PLASMA FIRE-CUTTER YEAR: 2006 PLASMA SOURCE: HYPERTHERM HPR260 CONTROL UNIT: MICRO STEPMSN500 WORK SURFACE: 12 X 3 M FILTER UNIT IS NOT INCLUDED. COUNTER READ: 27.623 HOURS MAX. PLATE THICKNESS: 50 MM PROVIDED WITH FUSES CABINET PROVIDED WITH MAIN SWITCH. DIMENSIONS: 4.554 X 14.100 X 1.800 MM X-AXLE: UP TO 12,000 MM Y-AXLE MAX.: 3000 MM Z-AXLE, MAX: 50 MM MAX. DIM. WORKPIECE: X: 12,800 MM Y: 3.000 MM BLACK: 50 MM MAXIMUM MATERIAL, THICKNESS: STEEL: 40 MM STAINLESS STEEL: 35 MM FRAME: 35 MM POWER: 380 VOLT, 70 KVA THIS IS AN ONLINE AUCTION: MORE INFO AND BIDDING VIA THIS URL: ABCS://ABC.MOYERSOEN-AUCTIONS.COM/LOT/2192097/15122/
Vendedor: Moyersoen NV
Año de construcción: usado
Precio: used machinery auction RESALE 192 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1400 x 1200 x 2600 mm<br/>description: 24 stacking chairs in blue-black. total available quantity: 1,500 ea. please contact us in case you require more units. WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1200 X 2600 MM
DESCRIPTION: 24 STACKING CHAIRS IN BLUE-BLACK. TOTAL AVAILABLE QUANTITY: 1,500 EA. PLEASE CONTACT US IN CASE YOU REQUIRE MORE UNITS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-paper format: 297 x 420 mm (a3) to 330 x 482 mm
printing up to 5 colors (cyan, magenta, yellow, black + pantone) PAPER FORMAT: 297 X 420 MM (A3) TO 330 X 482 MM PRINTING UP TO 5 COLORS (CYAN, MAGENTA, YELLOW, BLACK + PANTONE)
Vendedor: Bauelemente & Maschinen Ludwig Matzeder
Año de construcción: usado
Precio: used machinery auction RESALE 190 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 5 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: led response time: 5ms  brightness: 250 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: displayport, dvi-d, usb 2.0, usb-b, vga WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 5 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: LED RESPONSE TIME: 5MS BRIGHTNESS: 250 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: DISPLAYPORT, DVI-D, USB 2.0, USB-B, VGA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: direktadressierer astrojet 500
model: astrojet 500
year: 13
print technology inkjet, 3 hp 51645a cartridges
address speed up to 22,000/hr – no. 10 envelopes
print quality (dots per inch)
high quality 600x600dpi/standard quality 600x300dpi/letter quality 600x200dpi/draft quality 600x150dpi
print orientation normal and reverse
prints prints graphics, logos, and barcodes
material thickness up to 3/16”
memory 12 mb
print colors standard and versatile black, red, blue, green, and yellow
ink water-based. may require drying assistance for coated stock
software windowstm printer drivers for windowstm 98, 2000 and xp
pc interface parallel and usb
duty cycle 45 million addresses total or 750,000 per month over a 5-year life cycle
condition: good, in production
price on request
location: austria  MANUFACTURER: DIREKTADRESSIERER ASTROJET 500 MODEL: ASTROJET 500 YEAR: 13 PRINT TECHNOLOGY INKJET, 3 HP 51645A CARTRIDGES ADDRESS SPEED UP TO 22,000/HR – NO. 10 ENVELOPES PRINT QUALITY (DOTS PER INCH) HIGH QUALITY 600X600DPI/STANDARD QUALITY 600X300DPI/LETTER QUALITY 600X200DPI/DRAFT QUALITY 600X150DPI PRINT ORIENTATION NORMAL AND REVERSE PRINTS PRINTS GRAPHICS, LOGOS, AND BARCODES MATERIAL THICKNESS UP TO 3/16” MEMORY 12 MB PRINT COLORS STANDARD AND VERSATILE BLACK, RED, BLUE, GREEN, AND YELLOW INK WATER-BASED. MAY REQUIRE DRYING ASSISTANCE FOR COATED STOCK SOFTWARE WINDOWSTM PRINTER DRIVERS FOR WINDOWSTM 98, 2000 AND XP PC INTERFACE PARALLEL AND USB DUTY CYCLE 45 MILLION ADDRESSES TOTAL OR 750,000 PER MONTH OVER A 5-YEAR LIFE CYCLE CONDITION: GOOD, IN PRODUCTION PRICE ON REQUEST LOCATION: AUSTRIA
Vendedor: USED Machines
Año de construcción: usado
Precio: used machinery auction RESALE 90 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 500 mm<br/>description: bundle with 2 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: vga (d-sub, 15-pin), dvi-d, 1x usb typ b vesa-mounting adapter: vesa-standart 100 x 100 mm WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 500 MM
DESCRIPTION: BUNDLE WITH 2 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: VGA (D-SUB, 15-PIN), DVI-D, 1X USB TYP B VESA-MOUNTING ADAPTER: VESA-STANDART 100 X 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 599 €
Ubicación: Land-now up to 31.10.18! instead of new price â?¬7990 already for â?¬599 net! germany-wide shipping or on-site. for orders - just call: 02381 9727974 let you consult with a coffee - we set up the equipment according to your wishes! save the lease rent and lower your printing costs; no hassle to dry the ink! also, we have all spare parts of our equipment in stock even years after purchase.
product information:
leasing backscatter inspected and serviced! we trust our quality and give you 12 months warranty! color laser printers kyocera/ta/utax up to din a3! also pure black and white printing possible!
product information:
manufacturer triumph adler / kyocera / utax
type multifunction - color - up a3
print resolution:
600 x 600 dpi
speed:
up to 30 pages per minute - a4 - color and b &amp; w
up to 15 pages per minute - a3 - color and b &amp; w
first printing:
s/w: 6.2 seconds
color: approx. 8.1 seconds
printer languages:
pcl 6, kpdl3 (postscript3 compatible), xps direct print, pdf direct print
duplex function: yes
copy kopiergeschwindigkeit:
up to 30 pages per minute - a4 - color and b &amp; w
up to 15 pages per minute - a3 - color and b &amp; w
first copy:
s/w: 6.2 seconds
color: approx. 8.1 seconds
resolution:
600 x 600 dpi
multiple copies:
1-999
reduce/enlarge:
25-400 in 1% increments
duplex copying: yes
scan speed:
up to 70 pages per minute a4 - b &amp; w and color
file formats:
text, photo, text + photo, ocr
scanning resolution:
600, 400, 300, 200, 200 x 100, 200 x 400, 256 gray scale
features:
scan to pc, scan-to email, scan-to-ftp (ftp via ssl)
scan-to-twain, scan-to-smb, scan-to-box, scan-to-usb
fax
(optional)	compatibility:
super g3
modem speed:
maximum 33.6 kbps
transmission speed:
max 3 seconds (with jbig)
compression method:
mh, mr, mmr, jbig
scan-to-mail yes
memory 2,048 mb ram + 160 gb hdd
interfaces usb2.0 (hi-speed)
fastethernet (10/100basetx)
slot for optional compactflashâ® card
media tray:
1 x universal document feeder - 100 sheets
2-4 x tape feeder - 500 sheets
media types:
envelopes, plain paper, transparencies,
plain paper, labels, recycled paper
media sizes:
a3-a6r
media weights:
60 to 220 g / m2 - depending on the supply
operating system windows including windows 10 (64 bit)
mac os x 10.5
linux
special features-
mass abmessung(bxtxh):
approx. 75 x 67 x 123 cm
the manual, as well as the latest drivers are available online.
please call: 02381 9727974 NOW UP TO 31.10.18! INSTEAD OF NEW PRICE &ACIRC;?&NOT;7990 ALREADY FOR &ACIRC;?&NOT;599 NET! GERMANY-WIDE SHIPPING OR ON-SITE. FOR ORDERS - JUST CALL: 02381 9727974 LET YOU CONSULT WITH A COFFEE - WE SET UP THE EQUIPMENT ACCORDING TO YOUR WISHES! SAVE THE LEASE RENT AND LOWER YOUR PRINTING COSTS; NO HASSLE TO DRY THE INK! ALSO, WE HAVE ALL SPARE PARTS OF OUR EQUIPMENT IN STOCK EVEN YEARS AFTER PURCHASE. PRODUCT INFORMATION: LEASING BACKSCATTER INSPECTED AND SERVICED! WE TRUST OUR QUALITY AND GIVE YOU 12 MONTHS WARRANTY! COLOR LASER PRINTERS KYOCERA/TA/UTAX UP TO DIN A3! ALSO PURE BLACK AND WHITE PRINTING POSSIBLE! PRODUCT INFORMATION: MANUFACTURER TRIUMPH ADLER / KYOCERA / UTAX TYPE MULTIFUNCTION - COLOR - UP A3 PRINT RESOLUTION: 600 X 600 DPI SPEED: UP TO 30 PAGES PER MINUTE - A4 - COLOR AND B &AMP; W UP TO 15 PAGES PER MINUTE - A3 - COLOR AND B &AMP; W FIRST PRINTING: S/W: 6.2 SECONDS COLOR: APPROX. 8.1 SECONDS PRINTER LANGUAGES: PCL 6, KPDL3 (POSTSCRIPT3 COMPATIBLE), XPS DIRECT PRINT, PDF DIRECT PRINT DUPLEX FUNCTION: YES COPY KOPIERGESCHWINDIGKEIT: UP TO 30 PAGES PER MINUTE - A4 - COLOR AND B &AMP; W UP TO 15 PAGES PER MINUTE - A3 - COLOR AND B &AMP; W FIRST COPY: S/W: 6.2 SECONDS COLOR: APPROX. 8.1 SECONDS RESOLUTION: 600 X 600 DPI MULTIPLE COPIES: 1-999 REDUCE/ENLARGE: 25-400 IN 1% INCREMENTS DUPLEX COPYING: YES SCAN SPEED: UP TO 70 PAGES PER MINUTE A4 - B &AMP; W AND COLOR FILE FORMATS: TEXT, PHOTO, TEXT + PHOTO, OCR SCANNING RESOLUTION: 600, 400, 300, 200, 200 X 100, 200 X 400, 256 GRAY SCALE FEATURES: SCAN TO PC, SCAN-TO EMAIL, SCAN-TO-FTP (FTP VIA SSL) SCAN-TO-TWAIN, SCAN-TO-SMB, SCAN-TO-BOX, SCAN-TO-USB FAX (OPTIONAL) COMPATIBILITY: SUPER G3 MODEM SPEED: MAXIMUM 33.6 KBPS TRANSMISSION SPEED: MAX 3 SECONDS (WITH JBIG) COMPRESSION METHOD: MH, MR, MMR, JBIG SCAN-TO-MAIL YES MEMORY 2,048 MB RAM + 160 GB HDD INTERFACES USB2.0 (HI-SPEED) FASTETHERNET (10/100BASETX) SLOT FOR OPTIONAL COMPACTFLASH&ACIRC;® CARD MEDIA TRAY: 1 X UNIVERSAL DOCUMENT FEEDER - 100 SHEETS 2-4 X TAPE FEEDER - 500 SHEETS MEDIA TYPES: ENVELOPES, PLAIN PAPER, TRANSPARENCIES, PLAIN PAPER, LABELS, RECYCLED PAPER MEDIA SIZES: A3-A6R MEDIA WEIGHTS: 60 TO 220 G / M2 - DEPENDING ON THE SUPPLY OPERATING SYSTEM WINDOWS INCLUDING WINDOWS 10 (64 BIT) MAC OS X 10.5 LINUX SPECIAL FEATURES- MASS ABMESSUNG(BXTXH): APPROX. 75 X 67 X 123 CM THE MANUAL, AS WELL AS THE LATEST DRIVERS ARE AVAILABLE ONLINE. PLEASE CALL: 02381 9727974
Vendedor: Herr Christian Beier
Año de construcción: usado
Precio: used machinery auction RESALE 90 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: good condition, little scratches tested an cleaned toner: 20-70% printed pages: 35.000-75.000 technologie: multifunction device type: b/w resolution: 1800 x 600dpi, scanresolution 600x600 dpi (black) functions: scan color/sw, copy, fax, print(18 pages/min), network scanning ram: 96 mb ram ports: usb 2.0, modem, rj-45 (lan) duplex: no WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: GOOD CONDITION, LITTLE SCRATCHES TESTED AN CLEANED TONER: 20-70% PRINTED PAGES: 35.000-75.000 TECHNOLOGIE: MULTIFUNCTION DEVICE TYPE: B/W RESOLUTION: 1800 X 600DPI, SCANRESOLUTION 600X600 DPI (BLACK) FUNCTIONS: SCAN COLOR/SW, COPY, FAX, PRINT(18 PAGES/MIN), NETWORK SCANNING RAM: 96 MB RAM PORTS: USB 2.0, MODEM, RJ-45 (LAN) DUPLEX: NO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-chicken feet processing plant

this is a professional and whole chicken feet peeling production line, easy to operate, high output. the line was used only 4 months and could also be customized according to the requirements of the buyer.

chicken feet peeling production line advantages:
* the machines are all made of stainless steel, wich makes the chicken feet hygiene.
* excellent production quality, easy to operate
* a variety of processing capacity, we can customize it
* stable performance, low cost and labor saving.

the flow chart of the chicken feet peeling line is as follows

1 conveying
2 chicken feet
3 conveying
4 blanching
5 peeling
6 pre-cooling
7 sorting conveyor
8 cutting machine

1 put the chicken paw on the conveyor and transport the chicken feet to the blanching machine.
2 blanching is a necessary part in processing the chicken feet, through disinfect and cook chicken feet, the chicken feet is easy to peeling and it also can protect its natural flavor from being broken.
3 transport the chicken feet to the chicken feet peeling machine for peeling the skin via the conveyor.
4 the last and also core step is peeling, the chicken peeling machine can peeling the chicken feet skin and nail cleanly and there is no damage to chicken feet.
5 spyral type auto feet pre-cooling machine used for cooling chickens, in order to achieve the purpose of detoxification.


location latvia
voltage 400
frequency 50
4 months old
manufactured 2017

for sale the whole line consisting of

1 peeling line

setup in buyers plant available upon request

* for sale is a full set of machines for chicken feet processing.
* an example of average factory scheme in pdf format (drawing) to understand better all process together is available upon request.
* nominal power of this machines are 1 ton per hour, in fact optimal power is 6tn ready product in 8 working hr time.
* all machines goes with 3 phase, 380-400v electricity supply (consumption 21kw/hr)
* for heating purposes steam is needed (500kg/hr, range +130+160c degrees)
* water and drainage supply is needed (min 550 l/ hr)
* people for operation depends dramatically from feet quality.(percentage of black pads to remove) 

here are detailed description:

1. net chain lifting conveyor. main body is from stainless steel 304, net chain type lifting mechanism. chain width 600mm. usage - as supply point to feed scalding machine. 1 pc.

2. net chain chicken feet scalding machine. main body from stainless steel 304, net chain type transmission mechanism. steam pipe connector, automatic temperature controller for steam machine electromagnetic valve. with air supply heat mixer. outlet chute is divided into two parts- for two chicken feet peeling machines. machine dimensions: 5000x1100xh. usage - to blanche raw chicken feet and repair for yellow skin removal. 1 pc.

3. chicken feet peeling machine. main body from stainless steel 304 with food grade rubber peeling fingers inside. equipped with water supply. cleaning programme speed control with frequency controller. usage - for automatic chicken feet yellow skin peeling. length 3200. 2 pc.

4. elevating conveyor. main body from stainless steel 304, belt from 4 mm oil resistant food grade rubber. size 2500x550xh. usage - transporting chicken into cooling tank. 1 pc.

5. chute. usage - between elevating conveyor and cooling tank. main body from stainless steel 304. size 2000x800xh. 1 pc.

6. net chain washing cooling machine. main body from stainless steel 304. belt- net chain type transmission mechanism. with air supply water mixer, with water supply. usage - for chicken feet washing and pre-cooling. size: 6000x1100xh. 1 pc.

7. sorting table - conveyor. main body from stainless steel 304. belt from food grade rubber. usage - for sorting peeled chicken feet and check quality. size 6000x1100xh. 1 pc.

8. feet cutting machine. main body from stainless steel 304. special chicken feet keeping conveyor belt. equipped with 2 chicken feet cutting blades. usage - to cut chicken feet ankle part to make paws. 2 pc.

9. electricity controller (on/off for each machine) 2 pc. and frequency (speed) controller for chicken feet peeling machines. 2 pc.

10. sorting table. from stainless steel 304. usage - for any additional job - packaging, weighting, cleaning etc. 800x1800xh 2 pc. and 900x1900xh 2 pc.         CHICKEN FEET PROCESSING PLANT THIS IS A PROFESSIONAL AND WHOLE CHICKEN FEET PEELING PRODUCTION LINE, EASY TO OPERATE, HIGH OUTPUT. THE LINE WAS USED ONLY 4 MONTHS AND COULD ALSO BE CUSTOMIZED ACCORDING TO THE REQUIREMENTS OF THE BUYER. CHICKEN FEET PEELING PRODUCTION LINE ADVANTAGES: * THE MACHINES ARE ALL MADE OF STAINLESS STEEL, WICH MAKES THE CHICKEN FEET HYGIENE. * EXCELLENT PRODUCTION QUALITY, EASY TO OPERATE * A VARIETY OF PROCESSING CAPACITY, WE CAN CUSTOMIZE IT * STABLE PERFORMANCE, LOW COST AND LABOR SAVING. THE FLOW CHART OF THE CHICKEN FEET PEELING LINE IS AS FOLLOWS 1 CONVEYING 2 CHICKEN FEET 3 CONVEYING 4 BLANCHING 5 PEELING 6 PRE-COOLING 7 SORTING CONVEYOR 8 CUTTING MACHINE 1 PUT THE CHICKEN PAW ON THE CONVEYOR AND TRANSPORT THE CHICKEN FEET TO THE BLANCHING MACHINE. 2 BLANCHING IS A NECESSARY PART IN PROCESSING THE CHICKEN FEET, THROUGH DISINFECT AND COOK CHICKEN FEET, THE CHICKEN FEET IS EASY TO PEELING AND IT ALSO CAN PROTECT ITS NATURAL FLAVOR FROM BEING BROKEN. 3 TRANSPORT THE CHICKEN FEET TO THE CHICKEN FEET PEELING MACHINE FOR PEELING THE SKIN VIA THE CONVEYOR. 4 THE LAST AND ALSO CORE STEP IS PEELING, THE CHICKEN PEELING MACHINE CAN PEELING THE CHICKEN FEET SKIN AND NAIL CLEANLY AND THERE IS NO DAMAGE TO CHICKEN FEET. 5 SPYRAL TYPE AUTO FEET PRE-COOLING MACHINE USED FOR COOLING CHICKENS, IN ORDER TO ACHIEVE THE PURPOSE OF DETOXIFICATION. LOCATION LATVIA VOLTAGE 400 FREQUENCY 50 4 MONTHS OLD MANUFACTURED 2017 FOR SALE THE WHOLE LINE CONSISTING OF 1 PEELING LINE SETUP IN BUYERS PLANT AVAILABLE UPON REQUEST * FOR SALE IS A FULL SET OF MACHINES FOR CHICKEN FEET PROCESSING. * AN EXAMPLE OF AVERAGE FACTORY SCHEME IN PDF FORMAT (DRAWING) TO UNDERSTAND BETTER ALL PROCESS TOGETHER IS AVAILABLE UPON REQUEST. * NOMINAL POWER OF THIS MACHINES ARE 1 TON PER HOUR, IN FACT OPTIMAL POWER IS 6TN READY PRODUCT IN 8 WORKING HR TIME. * ALL MACHINES GOES WITH 3 PHASE, 380-400V ELECTRICITY SUPPLY (CONSUMPTION 21KW/HR) * FOR HEATING PURPOSES STEAM IS NEEDED (500KG/HR, RANGE +130+160C DEGREES) * WATER AND DRAINAGE SUPPLY IS NEEDED (MIN 550 L/ HR) * PEOPLE FOR OPERATION DEPENDS DRAMATICALLY FROM FEET QUALITY.(PERCENTAGE OF BLACK PADS TO REMOVE) HERE ARE DETAILED DESCRIPTION: 1. NET CHAIN LIFTING CONVEYOR. MAIN BODY IS FROM STAINLESS STEEL 304, NET CHAIN TYPE LIFTING MECHANISM. CHAIN WIDTH 600MM. USAGE - AS SUPPLY POINT TO FEED SCALDING MACHINE. 1 PC. 2. NET CHAIN CHICKEN FEET SCALDING MACHINE. MAIN BODY FROM STAINLESS STEEL 304, NET CHAIN TYPE TRANSMISSION MECHANISM. STEAM PIPE CONNECTOR, AUTOMATIC TEMPERATURE CONTROLLER FOR STEAM MACHINE ELECTROMAGNETIC VALVE. WITH AIR SUPPLY HEAT MIXER. OUTLET CHUTE IS DIVIDED INTO TWO PARTS- FOR TWO CHICKEN FEET PEELING MACHINES. MACHINE DIMENSIONS: 5000X1100XH. USAGE - TO BLANCHE RAW CHICKEN FEET AND REPAIR FOR YELLOW SKIN REMOVAL. 1 PC. 3. CHICKEN FEET PEELING MACHINE. MAIN BODY FROM STAINLESS STEEL 304 WITH FOOD GRADE RUBBER PEELING FINGERS INSIDE. EQUIPPED WITH WATER SUPPLY. CLEANING PROGRAMME SPEED CONTROL WITH FREQUENCY CONTROLLER. USAGE - FOR AUTOMATIC CHICKEN FEET YELLOW SKIN PEELING. LENGTH 3200. 2 PC. 4. ELEVATING CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304, BELT FROM 4 MM OIL RESISTANT FOOD GRADE RUBBER. SIZE 2500X550XH. USAGE - TRANSPORTING CHICKEN INTO COOLING TANK. 1 PC. 5. CHUTE. USAGE - BETWEEN ELEVATING CONVEYOR AND COOLING TANK. MAIN BODY FROM STAINLESS STEEL 304. SIZE 2000X800XH. 1 PC. 6. NET CHAIN WASHING COOLING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. BELT- NET CHAIN TYPE TRANSMISSION MECHANISM. WITH AIR SUPPLY WATER MIXER, WITH WATER SUPPLY. USAGE - FOR CHICKEN FEET WASHING AND PRE-COOLING. SIZE: 6000X1100XH. 1 PC. 7. SORTING TABLE - CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304. BELT FROM FOOD GRADE RUBBER. USAGE - FOR SORTING PEELED CHICKEN FEET AND CHECK QUALITY. SIZE 6000X1100XH. 1 PC. 8. FEET CUTTING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. SPECIAL CHICKEN FEET KEEPING CONVEYOR BELT. EQUIPPED WITH 2 CHICKEN FEET CUTTING BLADES. USAGE - TO CUT CHICKEN FEET ANKLE PART TO MAKE PAWS. 2 PC. 9. ELECTRICITY CONTROLLER (ON/OFF FOR EACH MACHINE) 2 PC. AND FREQUENCY (SPEED) CONTROLLER FOR CHICKEN FEET PEELING MACHINES. 2 PC. 10. SORTING TABLE. FROM STAINLESS STEEL 304. USAGE - FOR ANY ADDITIONAL JOB - PACKAGING, WEIGHTING, CLEANING ETC. 800X1800XH 2 PC. AND 900X1900XH 2 PC.
Vendedor: Optimisense LLC
Año de construcción: usado
Precio: used machinery auction RESALE 90 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 500 mm<br/>description: bundle with 2 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: vga (d-sub, 15-pin), dvi-d, 1x usb typ b vesa-mounting adapter: vesa-standart 100 x 100 mm WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 500 MM
DESCRIPTION: BUNDLE WITH 2 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: VGA (D-SUB, 15-PIN), DVI-D, 1X USB TYP B VESA-MOUNTING ADAPTER: VESA-STANDART 100 X 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we offer:
drawer steel cabinet bedrunka + hirth

quality from the black forest
 
contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  WE OFFER: DRAWER STEEL CABINET BEDRUNKA + HIRTH QUALITY FROM THE BLACK FOREST CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 55 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 5 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: vga (d-sub, 15-pin), dvi-d, 1x usb typ b vesa-mounting adapter: vesa-standart 100 x 100 mm WEIGHT APPROX.: 55 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 5 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: VGA (D-SUB, 15-PIN), DVI-D, 1X USB TYP B VESA-MOUNTING ADAPTER: VESA-STANDART 100 X 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-amada laser cutting system
type: flying optics
working range: 3000 mm x 1500 mm
laser power 4000 watt cnc fanuc

year of manuf. 2001, but this machine was working at amada's showroom as demonstration machine until 2004. it was bought from amada in 2004, so the machine works on production only from 2004. very good condition - see pictures! 

operational hours turbo about 18.000 h
operational machine approx. 54.500 h

cutting:
- black steel: up to 20 mm
- stainless steel: up to 12 mm
- aluminium: up to 8mm

additional equipment:
unloading system, which can discharge laser-cut workpieces with programmable vacuum suction cups

last main services: turbo-blower replaced in 2013
oil in the vacuum pump replacement in 2015
changed oil in turbo-blower in 2017

machine can be visited under power.
  AMADA LASER CUTTING SYSTEM TYPE: FLYING OPTICS WORKING RANGE: 3000 MM X 1500 MM LASER POWER 4000 WATT CNC FANUC YEAR OF MANUF. 2001, BUT THIS MACHINE WAS WORKING AT AMADA'S SHOWROOM AS DEMONSTRATION MACHINE UNTIL 2004. IT WAS BOUGHT FROM AMADA IN 2004, SO THE MACHINE WORKS ON PRODUCTION ONLY FROM 2004. VERY GOOD CONDITION - SEE PICTURES! OPERATIONAL HOURS TURBO ABOUT 18.000 H OPERATIONAL MACHINE APPROX. 54.500 H CUTTING: - BLACK STEEL: UP TO 20 MM - STAINLESS STEEL: UP TO 12 MM - ALUMINIUM: UP TO 8MM ADDITIONAL EQUIPMENT: UNLOADING SYSTEM, WHICH CAN DISCHARGE LASER-CUT WORKPIECES WITH PROGRAMMABLE VACUUM SUCTION CUPS LAST MAIN SERVICES: TURBO-BLOWER REPLACED IN 2013 OIL IN THE VACUUM PUMP REPLACEMENT IN 2015 CHANGED OIL IN TURBO-BLOWER IN 2017 MACHINE CAN BE VISITED UNDER POWER.
Vendedor: TDMW.PL Igor Kaliniec
Año de construcción: usado
Precio: used machinery auction RESALE 190 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 5 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: led response time: 5ms  brightness: 250 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: displayport, dvi-d, usb 2.0, usb-b, vga WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 5 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: LED RESPONSE TIME: 5MS BRIGHTNESS: 250 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: DISPLAYPORT, DVI-D, USB 2.0, USB-B, VGA
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-side forklifts including long freight traverse used less than 700 hours - -:
 
price from site: â?¬13.500.-(net)!
 
manufacturer: om fantuzzi
type: sf 40 l, sideloader mv sf 4000.
year of construction: 1992
hours of operation: only 695 hours
load capacity: 4000 kg
platform width: 1400 mm
lastschwerpkt. 700 mm
platform height: 800 mm
dimensions
length 3700 mm
width 2080 mm
telescopic mast:
lifting height: 4000 mm
height: 2950 mm
free lift: 800 mm
tyres: 27.10 - 12 - pr 14
engine iveco diesel 8141 i,.
44 kw/60 hp at 3000 rpm
rexroth - hydrostatic, transmission
with power shift - inching
axis hurth - rear axle, with internal multi-disk brake in oil bath.
lighting protection proper lighting system with iron bars.
cabin 3-sided glazed
wide carriage ak - ak 5000 mm
residual capacity 3200 kg
weight: 6.000 kg
condition: good, regular maintenance
available: available now
location: room offenburg, germany (black forest)
 
more data are available as pdf - shipping like on request!
  SIDE FORKLIFTS INCLUDING LONG FREIGHT TRAVERSE USED LESS THAN 700 HOURS - -: PRICE FROM SITE: &ACIRC;?&NOT;13.500.-(NET)! MANUFACTURER: OM FANTUZZI TYPE: SF 40 L, SIDELOADER MV SF 4000. YEAR OF CONSTRUCTION: 1992 HOURS OF OPERATION: ONLY 695 HOURS LOAD CAPACITY: 4000 KG PLATFORM WIDTH: 1400 MM LASTSCHWERPKT. 700 MM PLATFORM HEIGHT: 800 MM DIMENSIONS LENGTH 3700 MM WIDTH 2080 MM TELESCOPIC MAST: LIFTING HEIGHT: 4000 MM HEIGHT: 2950 MM FREE LIFT: 800 MM TYRES: 27.10 - 12 - PR 14 ENGINE IVECO DIESEL 8141 I,. 44 KW/60 HP AT 3000 RPM REXROTH - HYDROSTATIC, TRANSMISSION WITH POWER SHIFT - INCHING AXIS HURTH - REAR AXLE, WITH INTERNAL MULTI-DISK BRAKE IN OIL BATH. LIGHTING PROTECTION PROPER LIGHTING SYSTEM WITH IRON BARS. CABIN 3-SIDED GLAZED WIDE CARRIAGE AK - AK 5000 MM RESIDUAL CAPACITY 3200 KG WEIGHT: 6.000 KG CONDITION: GOOD, REGULAR MAINTENANCE AVAILABLE: AVAILABLE NOW LOCATION: ROOM OFFENBURG, GERMANY (BLACK FOREST) MORE DATA ARE AVAILABLE AS PDF - SHIPPING LIKE ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 10 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: led response time: 5ms  brightness: 250 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: displayport, dvi-d, usb 2.0, usb-b, vga WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 10 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: LED RESPONSE TIME: 5MS BRIGHTNESS: 250 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: DISPLAYPORT, DVI-D, USB 2.0, USB-B, VGA
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.950 €
Ubicación: Land-reverse loading lift table, 2 to 3 x 2 m, galvanized version - new -:
 
price from site: â?¬9.950.-(net)!
 
manufacturer: hymo (h + m pallet gmbh)
type: lx20-16/20/1-m
year of constr.: 2016 - reverse loading lift table but never built
former price: â?¬ 15.000.-(net)
condition: new
available: available now
location: 72419 neufra
 
reverse loading lift table - lifting table category 4 in accordance with en1570-1
technical data:
load capacity: 2000 kg
stroke: 1600 mm
height: 305 mm => plus 10 mm (item 3)
platform length: 3000 mm
platform width: 2000 mm
lifting / lowering time (ever): 37 sec
engine performance (s3 - 20% ed): 2.86 kw
operating voltage: 400 vac 3 ~ / n/pe / 50 hz
control voltage: 24 vdc
hydraulic unit/control: inside of the lifting table
platform extension: available upon request
standard lifting table equipment for - loading lifting tables:
mechanics:
-lower frame as profile design with mechanical end position stops,
with mounting holes to the shipping anchors
-scissors package profile steel with abschmierbaren bearings
(for increased lateral stability and reduced bearing load)
-8 mm teardrop with additional profile reinforced upper frame
-lifting eye
-service opening in the platform, screwed
hydraulic:
-unit with oil according to iso hm32
-piping between the cylinders and the hose connection to the unit
-cylinders with piston rod hard chromium-plated and abschmierbarer
-end-position cushioning in the cylinders, oil-filled minus side
electrics:
-standard motor in ip55, with cold conductor winding
-protection class ip65 e parts
-limit switch adjustable
-limit switch for safety contact strip
-deadman control with transformer, main switch provided on site
-hand button on the on/off/emergency off 3 m cable
security:
-safety contact edge interrupts the lowering process when touching below the platform-
-pipe burst safety valves in the cylinder
-maintenance support
-signs with safety note icons
operation and maintenance manual in german
painting:
-lifting table in ral 7046 tele grey or ral 5019 capri blue (other ral colors for the lifting table against)
additional charge possible)
-cylinder in ral 9005 jet black
-aggregate in ral 9005 jet black
standards:
-en1570-1, en982, en60204, internal work quality standard
-reverse loading lift tables are suitable for use outdoors (assembly / installation pit in accordance with our
installation drawing), however we recommend on the outdoor use a galvanized finish
please note the description of any subsequent accessories positions or in the listed
special accessories. deviations from the above described can accessories
standard equipment occur.
note: reverse loading lift tables are in the standard version with wheel loads (truck, car or)
forklift) system. therefore, a reinforcement of the platform is necessary, the we you at
necessary subsequently can offer.
note:
the controls (hand switch) is to plan / install, that use of the lifting table
this is can be viewed at any time on the platform, as well as below the platform. please
specify the control cable of the hand switch (standard length 3 m - mid lift table) in the
order.
the main power supply is to be provided with a main switch - both are building-side
services.
additional equipment:
hot dip galvanizing, scissors package/bottom frame/platform
-in accordance with the korrosivitã¤tskategorie c4
-without further top coat
wear rails electrically edited
-screwed on the top and bottom frame
attention:
the lifting table height is increased by 10 mm.
railings on the platform page
-with hands, knees running and bumper
-railing max. 1100 mm high
-bumper 150 mm high
-railing segment (1 pcs.) max 1500 mm long
-bolted to the platform
-on the platform side a-e
railing design plugin, without end switch monitoring
-with hands, knees running and bumper
-railing max. 1100 mm high
-bumper 150 mm high
-railing segment (1 pcs.) max 1500 mm long
-on the platform side b-f
hot-dip galvanized handrail segments
-for pos. 4 + 5
-in accordance with the korrosivitã¤tskategorie c4
-without further top coat
excess loading door, 200 x 450 mm
-on the platform side e-f
-throat depth 450 mm, width 200 mm
-construction galvanized without overarm - segments are individually operated REVERSE LOADING LIFT TABLE, 2 TO 3 X 2 M, GALVANIZED VERSION - NEW -: PRICE FROM SITE: &ACIRC;?&NOT;9.950.-(NET)! MANUFACTURER: HYMO (H + M PALLET GMBH) TYPE: LX20-16/20/1-M YEAR OF CONSTR.: 2016 - REVERSE LOADING LIFT TABLE BUT NEVER BUILT FORMER PRICE: &ACIRC;?&NOT; 15.000.-(NET) CONDITION: NEW AVAILABLE: AVAILABLE NOW LOCATION: 72419 NEUFRA REVERSE LOADING LIFT TABLE - LIFTING TABLE CATEGORY 4 IN ACCORDANCE WITH EN1570-1 TECHNICAL DATA: LOAD CAPACITY: 2000 KG STROKE: 1600 MM HEIGHT: 305 MM => PLUS 10 MM (ITEM 3) PLATFORM LENGTH: 3000 MM PLATFORM WIDTH: 2000 MM LIFTING / LOWERING TIME (EVER): 37 SEC ENGINE PERFORMANCE (S3 - 20% ED): 2.86 KW OPERATING VOLTAGE: 400 VAC 3 ~ / N/PE / 50 HZ CONTROL VOLTAGE: 24 VDC HYDRAULIC UNIT/CONTROL: INSIDE OF THE LIFTING TABLE PLATFORM EXTENSION: AVAILABLE UPON REQUEST STANDARD LIFTING TABLE EQUIPMENT FOR - LOADING LIFTING TABLES: MECHANICS: -LOWER FRAME AS PROFILE DESIGN WITH MECHANICAL END POSITION STOPS, WITH MOUNTING HOLES TO THE SHIPPING ANCHORS -SCISSORS PACKAGE PROFILE STEEL WITH ABSCHMIERBAREN BEARINGS (FOR INCREASED LATERAL STABILITY AND REDUCED BEARING LOAD) -8 MM TEARDROP WITH ADDITIONAL PROFILE REINFORCED UPPER FRAME -LIFTING EYE -SERVICE OPENING IN THE PLATFORM, SCREWED HYDRAULIC: -UNIT WITH OIL ACCORDING TO ISO HM32 -PIPING BETWEEN THE CYLINDERS AND THE HOSE CONNECTION TO THE UNIT -CYLINDERS WITH PISTON ROD HARD CHROMIUM-PLATED AND ABSCHMIERBARER -END-POSITION CUSHIONING IN THE CYLINDERS, OIL-FILLED MINUS SIDE ELECTRICS: -STANDARD MOTOR IN IP55, WITH COLD CONDUCTOR WINDING -PROTECTION CLASS IP65 E PARTS -LIMIT SWITCH ADJUSTABLE -LIMIT SWITCH FOR SAFETY CONTACT STRIP -DEADMAN CONTROL WITH TRANSFORMER, MAIN SWITCH PROVIDED ON SITE -HAND BUTTON ON THE ON/OFF/EMERGENCY OFF 3 M CABLE SECURITY: -SAFETY CONTACT EDGE INTERRUPTS THE LOWERING PROCESS WHEN TOUCHING BELOW THE PLATFORM- -PIPE BURST SAFETY VALVES IN THE CYLINDER -MAINTENANCE SUPPORT -SIGNS WITH SAFETY NOTE ICONS OPERATION AND MAINTENANCE MANUAL IN GERMAN PAINTING: -LIFTING TABLE IN RAL 7046 TELE GREY OR RAL 5019 CAPRI BLUE (OTHER RAL COLORS FOR THE LIFTING TABLE AGAINST) ADDITIONAL CHARGE POSSIBLE) -CYLINDER IN RAL 9005 JET BLACK -AGGREGATE IN RAL 9005 JET BLACK STANDARDS: -EN1570-1, EN982, EN60204, INTERNAL WORK QUALITY STANDARD -REVERSE LOADING LIFT TABLES ARE SUITABLE FOR USE OUTDOORS (ASSEMBLY / INSTALLATION PIT IN ACCORDANCE WITH OUR INSTALLATION DRAWING), HOWEVER WE RECOMMEND ON THE OUTDOOR USE A GALVANIZED FINISH PLEASE NOTE THE DESCRIPTION OF ANY SUBSEQUENT ACCESSORIES POSITIONS OR IN THE LISTED SPECIAL ACCESSORIES. DEVIATIONS FROM THE ABOVE DESCRIBED CAN ACCESSORIES STANDARD EQUIPMENT OCCUR. NOTE: REVERSE LOADING LIFT TABLES ARE IN THE STANDARD VERSION WITH WHEEL LOADS (TRUCK, CAR OR) FORKLIFT) SYSTEM. THEREFORE, A REINFORCEMENT OF THE PLATFORM IS NECESSARY, THE WE YOU AT NECESSARY SUBSEQUENTLY CAN OFFER. NOTE: THE CONTROLS (HAND SWITCH) IS TO PLAN / INSTALL, THAT USE OF THE LIFTING TABLE THIS IS CAN BE VIEWED AT ANY TIME ON THE PLATFORM, AS WELL AS BELOW THE PLATFORM. PLEASE SPECIFY THE CONTROL CABLE OF THE HAND SWITCH (STANDARD LENGTH 3 M - MID LIFT TABLE) IN THE ORDER. THE MAIN POWER SUPPLY IS TO BE PROVIDED WITH A MAIN SWITCH - BOTH ARE BUILDING-SIDE SERVICES. ADDITIONAL EQUIPMENT: HOT DIP GALVANIZING, SCISSORS PACKAGE/BOTTOM FRAME/PLATFORM -IN ACCORDANCE WITH THE KORROSIVIT&ATILDE;&CURREN;TSKATEGORIE C4 -WITHOUT FURTHER TOP COAT WEAR RAILS ELECTRICALLY EDITED -SCREWED ON THE TOP AND BOTTOM FRAME ATTENTION: THE LIFTING TABLE HEIGHT IS INCREASED BY 10 MM. RAILINGS ON THE PLATFORM PAGE -WITH HANDS, KNEES RUNNING AND BUMPER -RAILING MAX. 1100 MM HIGH -BUMPER 150 MM HIGH -RAILING SEGMENT (1 PCS.) MAX 1500 MM LONG -BOLTED TO THE PLATFORM -ON THE PLATFORM SIDE A-E RAILING DESIGN PLUGIN, WITHOUT END SWITCH MONITORING -WITH HANDS, KNEES RUNNING AND BUMPER -RAILING MAX. 1100 MM HIGH -BUMPER 150 MM HIGH -RAILING SEGMENT (1 PCS.) MAX 1500 MM LONG -ON THE PLATFORM SIDE B-F HOT-DIP GALVANIZED HANDRAIL SEGMENTS -FOR POS. 4 + 5 -IN ACCORDANCE WITH THE KORROSIVIT&ATILDE;&CURREN;TSKATEGORIE C4 -WITHOUT FURTHER TOP COAT EXCESS LOADING DOOR, 200 X 450 MM -ON THE PLATFORM SIDE E-F -THROAT DEPTH 450 MM, WIDTH 200 MM -CONSTRUCTION GALVANIZED WITHOUT OVERARM - SEGMENTS ARE INDIVIDUALLY OPERATED
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 90 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 500 mm<br/>description: bundle with 2 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: vga (d-sub, 15-pin), dvi-d, 1x usb typ b vesa-mounting adapter: vesa-standart 100 x 100 mm WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 500 MM
DESCRIPTION: BUNDLE WITH 2 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: VGA (D-SUB, 15-PIN), DVI-D, 1X USB TYP B VESA-MOUNTING ADAPTER: VESA-STANDART 100 X 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-drawer cabinet bacher
black/orange
11 drawers height inside 33 mm,.
mass inside each b 980 x 640mm
dimensions hxwxd 780x1100x700mm DRAWER CABINET BACHER BLACK/ORANGE 11 DRAWERS HEIGHT INSIDE 33 MM,. MASS INSIDE EACH B 980 X 640MM DIMENSIONS HXWXD 780X1100X700MM
Vendedor: OFS Offset-Full-Service Bondarenko GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 500 mm<br/>description: bundle with 2 units with attachments very cood condition tested  without pixel defects  screen size: 24 monitor color: marvelgrey/black aspect ratio: 16:10 maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/qm height adjustable: yes input connector: 1x dvi (hdcp), 1x d-sub  extra: integrated speaker, eco-modus, eco-standby, 3-in-1 stand WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 500 MM
DESCRIPTION: BUNDLE WITH 2 UNITS WITH ATTACHMENTS VERY COOD CONDITION TESTED WITHOUT PIXEL DEFECTS SCREEN SIZE: 24 MONITOR COLOR: MARVELGREY/BLACK ASPECT RATIO: 16:10 MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/QM HEIGHT ADJUSTABLE: YES INPUT CONNECTOR: 1X DVI (HDCP), 1X D-SUB EXTRA: INTEGRATED SPEAKER, ECO-MODUS, ECO-STANDBY, 3-IN-1 STAND
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-colour: black, note to the state: div. rust COLOUR: BLACK, NOTE TO THE STATE: DIV. RUST
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 270 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 1000 mm<br/>description: bundle with 10 units very good condition, testet, clear testprint toner: 30-80% printed pages: 15.000-45.000 technologie: laser type: b/w resolution: 1200x1200dpi, scanresolution 1200x1200dpi (black) functions: print(38 pages/min) ram: 64mb ports: usb 2.0, rj-45 (lan) duplex: yes WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 1000 MM
DESCRIPTION: BUNDLE WITH 10 UNITS VERY GOOD CONDITION, TESTET, CLEAR TESTPRINT TONER: 30-80% PRINTED PAGES: 15.000-45.000 TECHNOLOGIE: LASER TYPE: B/W RESOLUTION: 1200X1200DPI, SCANRESOLUTION 1200X1200DPI (BLACK) FUNCTIONS: PRINT(38 PAGES/MIN) RAM: 64MB PORTS: USB 2.0, RJ-45 (LAN) DUPLEX: YES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year 2009, 150.000 km, black, sport package, 
aircon, navi, automatic, etc. YEAR 2009, 150.000 KM, BLACK, SPORT PACKAGE, AIRCON, NAVI, AUTOMATIC, ETC.
Vendedor: Albens Development GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 140 €
Ubicación: Land-weight approx.: 55 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 5 units with attachments very cood condition tested  without pixel defects  screen size: 24 monitor color: marvelgrey/black aspect ratio: 16:10 maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/qm height adjustable: yes input connector: 1x dvi (hdcp), 1x d-sub  extra: integrated speaker, eco-modus, eco-standby, 3-in-1 stand WEIGHT APPROX.: 55 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 5 UNITS WITH ATTACHMENTS VERY COOD CONDITION TESTED WITHOUT PIXEL DEFECTS SCREEN SIZE: 24 MONITOR COLOR: MARVELGREY/BLACK ASPECT RATIO: 16:10 MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/QM HEIGHT ADJUSTABLE: YES INPUT CONNECTOR: 1X DVI (HDCP), 1X D-SUB EXTRA: INTEGRATED SPEAKER, ECO-MODUS, ECO-STANDBY, 3-IN-1 STAND
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-oce toner, fuser oil and staple cartidges
description:	number of pieces:
oce c2 toner yellow:	3
oce c2 toner black:	2
oce c2 toner green:	3x
oce c2 toner cyan:	4
oce c2 toner blue:	4
oce c2 toner red:	3x
oce c2 toner magenta:	3x
oce f3/f11 toner	5x
oce s2 spaple cartidges	3x 5000
oce s3  spaple cartidges	3x 5000
 OCE TONER, FUSER OIL AND STAPLE CARTIDGES DESCRIPTION: NUMBER OF PIECES: OCE C2 TONER YELLOW: 3 OCE C2 TONER BLACK: 2 OCE C2 TONER GREEN: 3X OCE C2 TONER CYAN: 4 OCE C2 TONER BLUE: 4 OCE C2 TONER RED: 3X OCE C2 TONER MAGENTA: 3X OCE F3/F11 TONER 5X OCE S2 SPAPLE CARTIDGES 3X 5000 OCE S3 SPAPLE CARTIDGES 3X 5000
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 10 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: led response time: 5ms  brightness: 250 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: displayport, dvi-d, usb 2.0, usb-b, vga WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 10 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: LED RESPONSE TIME: 5MS BRIGHTNESS: 250 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: DISPLAYPORT, DVI-D, USB 2.0, USB-B, VGA
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 50 €
Ubicación: Land-â?¢ manufacturer: hp
â?¢ type: laser jet p2055dn
â?¢ length: approximately 0.36 m
â?¢ width: 0.36 m
â?¢ height: approx. 0.27 m
â?¢ net weight: approx. 11 kg
â?¢ more efficient and user friendly laser printer â?¢ 33 black and white pages per minute
â?¢ 250-sheet paper drawer
â?¢ printing technology: laser printer â?¢ ram memory: 128 mb
â?¢ year of construction: 2008 &ACIRC;?&CENT; MANUFACTURER: HP &ACIRC;?&CENT; TYPE: LASER JET P2055DN &ACIRC;?&CENT; LENGTH: APPROXIMATELY 0.36 M &ACIRC;?&CENT; WIDTH: 0.36 M &ACIRC;?&CENT; HEIGHT: APPROX. 0.27 M &ACIRC;?&CENT; NET WEIGHT: APPROX. 11 KG &ACIRC;?&CENT; MORE EFFICIENT AND USER FRIENDLY LASER PRINTER &ACIRC;?&CENT; 33 BLACK AND WHITE PAGES PER MINUTE &ACIRC;?&CENT; 250-SHEET PAPER DRAWER &ACIRC;?&CENT; PRINTING TECHNOLOGY: LASER PRINTER &ACIRC;?&CENT; RAM MEMORY: 128 MB &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2008
Vendedor: USEDmarket GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 500 x 600 x 500 mm<br/>description: bundle with 2 units with attachments very cood condition tested  without pixel defects  screen size: 24 monitor color: marvelgrey/black aspect ratio: 16:10 maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/qm height adjustable: yes input connector: 1x dvi (hdcp), 1x d-sub  extra: integrated speaker, eco-modus, eco-standby, 3-in-1 stand WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 600 X 500 MM
DESCRIPTION: BUNDLE WITH 2 UNITS WITH ATTACHMENTS VERY COOD CONDITION TESTED WITHOUT PIXEL DEFECTS SCREEN SIZE: 24 MONITOR COLOR: MARVELGREY/BLACK ASPECT RATIO: 16:10 MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/QM HEIGHT ADJUSTABLE: YES INPUT CONNECTOR: 1X DVI (HDCP), 1X D-SUB EXTRA: INTEGRATED SPEAKER, ECO-MODUS, ECO-STANDBY, 3-IN-1 STAND
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-spindle press
pressure 30 ton
dimensions of the table 600 mm x 500 mm
height 380 mm
control black.
current accident prevention regulations examination            SPINDLE PRESS PRESSURE 30 TON DIMENSIONS OF THE TABLE 600 MM X 500 MM HEIGHT 380 MM CONTROL BLACK. CURRENT ACCIDENT PREVENTION REGULATIONS EXAMINATION
Vendedor: UKM Urban - Maschinenbau
Año de construcción: usado
Precio: used machinery auction RESALE 270 €
Ubicación: Land-weight approx.: 110 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 10 units with attachments very cood condition tested  without pixel defects  screen size: 24 monitor color: marvelgrey/black aspect ratio: 16:10 maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/qm height adjustable: yes input connector: 1x dvi (hdcp), 1x d-sub  extra: integrated speaker, eco-modus, eco-standby, 3-in-1 stand WEIGHT APPROX.: 110 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 10 UNITS WITH ATTACHMENTS VERY COOD CONDITION TESTED WITHOUT PIXEL DEFECTS SCREEN SIZE: 24 MONITOR COLOR: MARVELGREY/BLACK ASPECT RATIO: 16:10 MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/QM HEIGHT ADJUSTABLE: YES INPUT CONNECTOR: 1X DVI (HDCP), 1X D-SUB EXTRA: INTEGRATED SPEAKER, ECO-MODUS, ECO-STANDBY, 3-IN-1 STAND
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 10 €
Ubicación: Land-â?¢ ã?: 0.11 m
â?¢ height: 1.23 m
â?¢ with base (approx. 0.30 m x 0.30 m) to the ground fixing
â?¢ color: money black &ACIRC;?&CENT; &ATILDE;?: 0.11 M &ACIRC;?&CENT; HEIGHT: 1.23 M &ACIRC;?&CENT; WITH BASE (APPROX. 0.30 M X 0.30 M) TO THE GROUND FIXING &ACIRC;?&CENT; COLOR: MONEY BLACK
Vendedor: USEDmarket GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 170 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 5 units very cood condition tested  without pixel defects  screen size: 24 monitor color: marvelgrey/black aspect ratio: 16:10 maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/qm height adjustable: yes input connector: 1x dvi (hdcp), 1x d-sub  extra: integrated speaker, eco-modus, eco-standby, 3-in-1 stand WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 5 UNITS VERY COOD CONDITION TESTED WITHOUT PIXEL DEFECTS SCREEN SIZE: 24 MONITOR COLOR: MARVELGREY/BLACK ASPECT RATIO: 16:10 MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/QM HEIGHT ADJUSTABLE: YES INPUT CONNECTOR: 1X DVI (HDCP), 1X D-SUB EXTRA: INTEGRATED SPEAKER, ECO-MODUS, ECO-STANDBY, 3-IN-1 STAND
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 693 €
Ubicación: Land-scope of delivery and minimum order quantity:.
6 shelf fields single-line, length x height x depth 6000 x 2300 x 500
each field with 6 shelves, load capacity 100 kg evenly distributed load.
shelf divider (plug splitter), free-standing with mortise axes
stable plastic (black) t x h 447 x 190 mm SCOPE OF DELIVERY AND MINIMUM ORDER QUANTITY:. 6 SHELF FIELDS SINGLE-LINE, LENGTH X HEIGHT X DEPTH 6000 X 2300 X 500 EACH FIELD WITH 6 SHELVES, LOAD CAPACITY 100 KG EVENLY DISTRIBUTED LOAD. SHELF DIVIDER (PLUG SPLITTER), FREE-STANDING WITH MORTISE AXES STABLE PLASTIC (BLACK) T X H 447 X 190 MM
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 600 mm<br/>description: bundle with 5 units with attachments   a-grade without scratches and pixel failure tested  screen size: 24 monitor color: silver-black  maximum resolution: 1920 x 1200 display technology: tft response time: 5ms  brightness: 300 cd/m2 height adjustable: yes pivot-function: yes  turnable: yes  heightadjustable: yes input connector: vga (d-sub, 15-pin), dvi-d, 1x usb typ b vesa-mounting adapter: vesa-standart 100 x 100 mm WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 600 MM
DESCRIPTION: BUNDLE WITH 5 UNITS WITH ATTACHMENTS A-GRADE WITHOUT SCRATCHES AND PIXEL FAILURE TESTED SCREEN SIZE: 24 MONITOR COLOR: SILVER-BLACK MAXIMUM RESOLUTION: 1920 X 1200 DISPLAY TECHNOLOGY: TFT RESPONSE TIME: 5MS BRIGHTNESS: 300 CD/M2 HEIGHT ADJUSTABLE: YES PIVOT-FUNCTION: YES TURNABLE: YES HEIGHTADJUSTABLE: YES INPUT CONNECTOR: VGA (D-SUB, 15-PIN), DVI-D, 1X USB TYP B VESA-MOUNTING ADAPTER: VESA-STANDART 100 X 100 MM
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)