blanch todas las categorias

Ubicación: CONVECTION STEAM OVEN RATIONAL SCC 202, ELECTRIC. THE PRESENTED OVEN HAS UNLIMITED POSSIBILITIES: BAKING, FRYING, GRILLING, STEAMING, STEWING, BLANCHING, BOILING IN A WATER BATH. ALL THIS CAN BE DONE IN ONE DEVICE! COMPARED TO TRADITIONAL CONVECTION OVENS, THE SELFCOOKING CENTER PREPARES FOOD EVEN BY 15% FASTER. THE SELFCOOKING CENTER, WHICH NEED THE MINIMUM SPACE, REPLACES UP TO 50% OF TRADITIONAL KITCHEN APPLIANCES SUCH AS CONVECTION OVENS, KITCHENS, TILTING PANS, BOILERS, FRYERS, POTS. SELFCOOKING CONTROL FULLY AUTOMATICALLY ALLOWS YOU TO TAKE ADVANTAGE OF ALL THE TECHNICAL CAPABILITIES OF THE SELFCOOKING CENTER. SPECIFICATION: PRODUCER: RATIONAL MODEL: SCC 202 TYPE: STEAM-CONVECTION OVEN WATERING: ELECTRIC TOTAL DIMENSIONS: - HEIGHT 1800 MM - WIDTH 1100 MM - 1000 MM DEEP POWER: 62 KW NUMBER OF SHELVES: 20 DAILY NUMBER OF MEALS: 300-500 WATER PRESSURE: 150-600 KPA 6 WORKING MODES: COOKING, BAKING, WITH STEAM, COOKING AT REDUCED TEMPERATURE, REGENERATION, TEMPERATURE MAINTENANCE. TEMPERATURE RANGE: UP TO 300 ° C ROLLER IN COMPLETE TIMER: 120MIN OR CONTINUOUS OPERATION

Ubicación: PRESSURE: 90 T
THROAT: MM
STROKE: 120 MM
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: ECCENTRIC / CRANK:
- FRAME DESIGN: C-FRAME, SINGLE SIDED:
- NUMBER OF SUSPENSIONS: 1
- NUMBER OF SLIDE ACTIONS: 1
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 90 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 900 MM
- TABLE SURFACE (FRONT-BACK): 495 MM
SLIDE:
- TABLE SURFACE (LEFT-RIGHT): 565 MM
- TABLE SURFACE (FRONT-BACK): 405 MM
- STROKE: 120 MM
- STROKE RATE (MAX.): 65 /MIN
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 90 MM
- STROKE MIN.: 20 MM
- STROKE MAX.: 120 MM
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 380 MM
- SHUT HEIGHT TABLE-DOWNHOLDER (STROKE DOWN, ADJUS: 430 MM
PRESS CAN BE INSPECTED UNDER RUNNING CONDITIONS

Ubicación: CHICKEN FEET PROCESSING PLANT THIS IS A PROFESSIONAL AND WHOLE CHICKEN FEET PEELING PRODUCTION LINE, EASY TO OPERATE, HIGH OUTPUT. THE LINE WAS USED ONLY 4 MONTHS AND COULD ALSO BE CUSTOMIZED ACCORDING TO THE REQUIREMENTS OF THE BUYER. CHICKEN FEET PEELING PRODUCTION LINE ADVANTAGES: * THE MACHINES ARE ALL MADE OF STAINLESS STEEL, WICH MAKES THE CHICKEN FEET HYGIENE. * EXCELLENT PRODUCTION QUALITY, EASY TO OPERATE * A VARIETY OF PROCESSING CAPACITY, WE CAN CUSTOMIZE IT * STABLE PERFORMANCE, LOW COST AND LABOR SAVING. THE FLOW CHART OF THE CHICKEN FEET PEELING LINE IS AS FOLLOWS 1 CONVEYING 2 CHICKEN FEET 3 CONVEYING 4 BLANCHING 5 PEELING 6 PRE-COOLING 7 SORTING CONVEYOR 8 CUTTING MACHINE 1 PUT THE CHICKEN PAW ON THE CONVEYOR AND TRANSPORT THE CHICKEN FEET TO THE BLANCHING MACHINE. 2 BLANCHING IS A NECESSARY PART IN PROCESSING THE CHICKEN FEET, THROUGH DISINFECT AND COOK CHICKEN FEET, THE CHICKEN FEET IS EASY TO PEELING AND IT ALSO CAN PROTECT ITS NATURAL FLAVOR FROM BEING BROKEN. 3 TRANSPORT THE CHICKEN FEET TO THE CHICKEN FEET PEELING MACHINE FOR PEELING THE SKIN VIA THE CONVEYOR. 4 THE LAST AND ALSO CORE STEP IS PEELING, THE CHICKEN PEELING MACHINE CAN PEELING THE CHICKEN FEET SKIN AND NAIL CLEANLY AND THERE IS NO DAMAGE TO CHICKEN FEET. 5 SPYRAL TYPE AUTO FEET PRE-COOLING MACHINE USED FOR COOLING CHICKENS, IN ORDER TO ACHIEVE THE PURPOSE OF DETOXIFICATION. LOCATION LATVIA VOLTAGE 400 FREQUENCY 50 4 MONTHS OLD MANUFACTURED 2017 FOR SALE THE WHOLE LINE CONSISTING OF 1 PEELING LINE SETUP IN BUYERS PLANT AVAILABLE UPON REQUEST * FOR SALE IS A FULL SET OF MACHINES FOR CHICKEN FEET PROCESSING. * AN EXAMPLE OF AVERAGE FACTORY SCHEME IN PDF FORMAT (DRAWING) TO UNDERSTAND BETTER ALL PROCESS TOGETHER IS AVAILABLE UPON REQUEST. * NOMINAL POWER OF THIS MACHINES ARE 1 TON PER HOUR, IN FACT OPTIMAL POWER IS 6TN READY PRODUCT IN 8 WORKING HR TIME. * ALL MACHINES GOES WITH 3 PHASE, 380-400V ELECTRICITY SUPPLY (CONSUMPTION 21KW/HR) * FOR HEATING PURPOSES STEAM IS NEEDED (500KG/HR, RANGE +130+160C DEGREES) * WATER AND DRAINAGE SUPPLY IS NEEDED (MIN 550 L/ HR) * PEOPLE FOR OPERATION DEPENDS DRAMATICALLY FROM FEET QUALITY.(PERCENTAGE OF BLACK PADS TO REMOVE) HERE ARE DETAILED DESCRIPTION: 1. NET CHAIN LIFTING CONVEYOR. MAIN BODY IS FROM STAINLESS STEEL 304, NET CHAIN TYPE LIFTING MECHANISM. CHAIN WIDTH 600MM. USAGE - AS SUPPLY POINT TO FEED SCALDING MACHINE. 1 PC. 2. NET CHAIN CHICKEN FEET SCALDING MACHINE. MAIN BODY FROM STAINLESS STEEL 304, NET CHAIN TYPE TRANSMISSION MECHANISM. STEAM PIPE CONNECTOR, AUTOMATIC TEMPERATURE CONTROLLER FOR STEAM MACHINE ELECTROMAGNETIC VALVE. WITH AIR SUPPLY HEAT MIXER. OUTLET CHUTE IS DIVIDED INTO TWO PARTS- FOR TWO CHICKEN FEET PEELING MACHINES. MACHINE DIMENSIONS: 5000X1100XH. USAGE - TO BLANCHE RAW CHICKEN FEET AND REPAIR FOR YELLOW SKIN REMOVAL. 1 PC. 3. CHICKEN FEET PEELING MACHINE. MAIN BODY FROM STAINLESS STEEL 304 WITH FOOD GRADE RUBBER PEELING FINGERS INSIDE. EQUIPPED WITH WATER SUPPLY. CLEANING PROGRAMME SPEED CONTROL WITH FREQUENCY CONTROLLER. USAGE - FOR AUTOMATIC CHICKEN FEET YELLOW SKIN PEELING. LENGTH 3200. 2 PC. 4. ELEVATING CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304, BELT FROM 4 MM OIL RESISTANT FOOD GRADE RUBBER. SIZE 2500X550XH. USAGE - TRANSPORTING CHICKEN INTO COOLING TANK. 1 PC. 5. CHUTE. USAGE - BETWEEN ELEVATING CONVEYOR AND COOLING TANK. MAIN BODY FROM STAINLESS STEEL 304. SIZE 2000X800XH. 1 PC. 6. NET CHAIN WASHING COOLING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. BELT- NET CHAIN TYPE TRANSMISSION MECHANISM. WITH AIR SUPPLY WATER MIXER, WITH WATER SUPPLY. USAGE - FOR CHICKEN FEET WASHING AND PRE-COOLING. SIZE: 6000X1100XH. 1 PC. 7. SORTING TABLE - CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304. BELT FROM FOOD GRADE RUBBER. USAGE - FOR SORTING PEELED CHICKEN FEET AND CHECK QUALITY. SIZE 6000X1100XH. 1 PC. 8. FEET CUTTING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. SPECIAL CHICKEN FEET KEEPING CONVEYOR BELT. EQUIPPED WITH 2 CHICKEN FEET CUTTING BLADES. USAGE - TO CUT CHICKEN FEET ANKLE PART TO MAKE PAWS. 2 PC. 9. ELECTRICITY CONTROLLER (ON/OFF FOR EACH MACHINE) 2 PC. AND FREQUENCY (SPEED) CONTROLLER FOR CHICKEN FEET PEELING MACHINES. 2 PC. 10. SORTING TABLE. FROM STAINLESS STEEL 304. USAGE - FOR ANY ADDITIONAL JOB - PACKAGING, WEIGHTING, CLEANING ETC. 800X1800XH 2 PC. AND 900X1900XH 2 PC.

Ubicación: MAKE FTNON FOOD TECHNOLOGY ALMELO, NO 550313/250, NEW 2005, LENGTH 3500MM, TUNNEL LENGTH 2000MM, WITH MOTOR 0,25 KW, 220-240/380-415 VOLT, WITH VARIABLE SPEED DRIVE, WITH SWITCHGEAR, FLOORSPACE 3,8X1,3 M, TOTAL HEIGHT 2,1 MBLANCHERSSTIRRING VESSELS > BLANCHERS

Ubicación: SUITABLE FOR SHRIMP, SEAFOOD, FRUIT, VEGETABLES, MEAT, ETC. THERE ARE 4 COOKING ZONES (CHAMBERS) IN THE PLANT, WHICH CAN BE OPERATED SEPARATELY. THEREFORE, ARISE MANY VARIATIONS TO COOK PRODUCT OR BLANCH. THIS LINE CONSISTS OF 2 MAIN PARTS: (A) THE CONTINUOUS COOKING TUNNEL PHOTOS AND DIMENSIONS AS FOLLOWS: LENGTH 653CM, WIDTH 190CM, HEIGHT 250 CM WEIGHT CA. 3200 KGS (B) THE STEAM GENERATION UNIT LENGTH CA CA 200CM, WIDTH 120CM, HEIGHT 220CM WEIGHT APPROX. 1400KGS

Ubicación:

Ubicación: BLANCHING SCREW, TYPE: MULTI-ZONE SCREW BLANCHEUR, SERIAL NUMBER: 20050721, YEAR OF CONSTRUCTION: 2005, 230/400 V, 50 HZ, CAPACITY: 2000 KG PER HOUR, DIAMETER SCREW: 800 MM, DISTANCE BETWEEN SCREWS: 300 MM, LENGTH SCREW: 4500 MM, S/S OUTFEED MESH BELT, BELT WIDTH: 450 MM, DIMENSIONS BLANCHING SCREW: 6000 MM X 2700 MM X 2500 MM, INCLUDING S/S PLATFORM WITH STAIRS, DIMENSIONS PLATFORM: 5500 MM X 1400 MM X 1600 MM AND S/S SWITCH CABINET, DIMENSIONS SWITCH CABINET: 800 MM X 360 MM X 2500 MM.

Ubicación: ROLL FORMING UNIT WHM 17 MK 2: *DISTANCE BETWEEN CENTERS (AXES): 60 MM FIXED *DISTANCE BETWEEN STATIONS (CENTERS): 100 MM *AXIS DIA: 28 MM

Ubicación: ROTARY SCALDER. 1, 5HP. METAL SHEET. OR HOLE 8 MM. DIMENSIONS: SURFACE SCALDING: 1,900 MM LENGTH, ø 900 MM. OVERALL DIMENSIONS: 1,250 MM WIDE, 2400 MM LENGTH, 2,400 MM HIGH.

Ubicación: WITH CNC ROBOSOFT

Ubicación: “BERIEF” DRUM BLANCHER TYPE JUMBO KODUKO 16/500 CONTINUOUS BLANCHING / PASTEURIZING / COOKING VESSEL OR COOLING PLANT SHAFTLESS SPIRAL : PERFORATED DRUM WITH WELDED SCREW (HELIX CONFIGURATION) BY WHICH THE PRODUCTS ARE GENTLY TRANSPORTED THROUGH THE WATER COMPLETE INSULATED CLOSED SYSTEM : ENERGY SAVING BY THE INSULATION OF THE ENTIRE MACHINE AND THE INDIRECT STEAM HEATING NETT LENGTH ± 11 M ALL STAINLESS STEEL ADJUSTABLE SPEED VARIABLE DWELL ADJUSTMENT STEAM HEATED • CONNECTION 400 KG / H (5 BAR) HEAT EXCHANGER CIRCULATION PUMP WITH CONVEYOR BELT WITH ELEVATING SPIRAL SCREW FOR LOADING

Ubicación: RANGE: DIA 200 MM X 300 MM HEIGHTWORKTABLE DIA: 1000 MMGRINDING WHEEL: 200 X 120 X 250 MMSPEED: 1200 RPMPOWER: 2X 30 HP MOTORS

Ubicación: GOOD OPERATED MACHINE

Ubicación: RANGE: DIA 914 MM X 300 MM HEIGH X 760 MM CHUCKWORKTABLE: 760 OR 914 MM CHUCKSPEED OF WHEEL: 720-750 RPMSPEED OF CHUCK: 6 - 33 RPM

Ubicación: BELT BLANCHER FULLY STAINLESS STEEL

Ubicación: COMPLETE LINE FOR PROCESSING MUSHROOMS FOR SALE FROM BLANCHING COOLING SLICING ETC. ETC. INCLUDE CANNING AGE 2006 ( USED FOR 3 YEARS ONLY) SEE PICTURES

Ubicación: LARGE SALE OF PROCESSING AND PACKAGING MACHINERY FOR THE BAKERY, BISCUIT AND CONFECTIONERY INDUSTRIES. ALL MACHINES ARE BEING SOLD ON AN ‘AS SEEN’ BASIS AT ATTRACTIVE PRICES. PLEASE CONTACT US FOR MORE INFORMATION. BAKERY PROCESSING MACHINES • EGG BREAKERS AND SEPARATORS (4 AVAILABLE) • NUT BLANCHER, ALL STAINLESS STEEL, (2 AVAILABLE) • SELECTION OF MILLS, CUTTERS, AND KIBBLERS • SELECTION OF DOUGH MIXERS • GRANITE 3-ROLL REFINERS (5 AVAILABLE) • NUT ROASTERS (2 AVAILABLE) JAM MANUFACTURING PLANT, FRUIT PROCESSING WITH 12 JACKETED PANS AND 41 CONTAINERS FORMING, MOULDING, & DEPOSITING MACHINES AND OVENS • OKA DEPOSITING AND MOULDING MACHINES (3 AVAILABLE) • RIJKAART EXTRUDING, DEPOSITING, LAMINATING & CUTTING LINE, 6 HEADS, 16M LONG • WIRE CUT DEPOSITORS, EXTRUDERS, AND BISCUIT CAPPERS • DIGITAL CONTROL 37 WATER JET CUTTER, NEVER USED • IPSA (LIC. WERNER & PFLEIDERER) OIL FIRED BREAD/CAKE OVEN, 18M LONG, 1700MM BAND WIDTH, SUITABLE FOR TRAYED CAKES ETC. • J. LLOPIS ELECTRIC OVEN, 25M LONG, 800MM BELT • J. LLOPIS ROTARY OVEN (3 AVAILABLE) • LLOVERAS SIMA 5 SOLID CHOCOLATE MOULDING PLANT WITH 6 SETS OF TABLET MOULDS • METRA 1300MM CHOCOLATE ENROBER WITH TEMPERING MACHINE PACKAGING MACHINES • VFFS BAGGING MACHINES WITH VOLUMETRIC FILLERS (2 AVAILABLE) • OMORI FLOW WRAPPER HFFS (2 AVAILABLE) • ILAPACK DELTA G FLOW WRAPPER HFFS, BOX MOTION SEALING JAWS • ULMA CHOCOLATE TABLET WRAPPING MACHINE (3 AVAILABLE) • DIXIEVAC THERMOFORMING MACHINES 2000 & 2400 (3 AVAILABLE) • CIELLI (FMC) CARTON ERECTOR, FOR TOP LOAD CARTONS, GLUE FORM • ZANASI KB HORIZONTAL CARTONER, GLUE CLOSURE • PRODEC HORIZONTAL CARTONER, GLUE CLOSURE • CIEMME FM 80 DK PACKING LINE, COMPRISING 2 X TRAY BASE FORMERS, AUTO TRAY LOADING UNIT, AND 2 X LID FORMERS AND LID PLACING UNIT. • BFB 3711 CARTON OVERWRAPPING MACHINE (5 AVAILABLE) • BFB 3707 CARTON OVERWRAPPING MACHINE • MARCHESINI T30 CARTON OVERWRAPPING MACHINE • SMABO T20 CARTON OVERWRAPPING MACHINE (3 AVAILABLE) • FESA UE6 CARTON OVERWRAPPING MACHINE (4 AVAILABLE) • PRB SUPERPOCKET CASE PACKER THIS IS A LISTING OF MOST OF THE MAJOR ITEMS OF EQUIPMENT. ALSO AVAILABLE ARE GENERAL FACTORY ITEMS SUCH AS FORK TRUCK, CHILLERS, FANS, PUMPS, REFRIGERATORS, TRANSFORMER, PALLET WRAPPER, VACUUM PUMPS, STAINLESS STEEL TANKS AND VESSELS, CONVEYORS, STAINLESS STEEL TABLES ETC.

Ubicación: USED STAINLESS STEEL BLANCHER, TYPE BR.11, MADE BY FEMIA. NEW 1978. DEDICATED TO LEAFY VEGETABLES, UP TO 3T/H. POSSIBLE PROCESSING OF ALL VEGETABLES - INCLUDING COOKING BEETROOT SLICES. EFFICIENT, WITH NEW BUCKETS - 100 PCS.

Ubicación: GENERAL CHARACTERISTICS WHEEL SPEED 730 RPM. WIDTH OF THE GRINDING WHEEL 45 MM. Ø TOOL 510 MM. TABLE FEATURES NO. SPEEDS WORKTABLE 6 DE 5/27 RPM. Ø TABLE 920 MM. ELECTRICAL CHARACTERISTICS MOTOR POWER WHEELHEAD 30 CV. VOLTAGE 380 V DIMENSIONS AND WEIGHTS HIGH 2400 MM. LONG 3800 MM. WIDTH 2000 MM. OTHER FEATURES INCLUDED ACCESSORIES MUELAS. NO. MANUFACTURING 12312

Ubicación: PASTEURIZATION STORCI TUNNEL. FIRST PART OF A LENGTH OF 6000 MM IN STEAMING, THEN SECOND PART WITH A LENGTH OF 2000 MM TO FINISH COOKING AND DRY PRODUCT, WIDTH OF 1000 MM BELT FULL LENGTH 10300 MM, WIDTH 2400 MM, HEIGHT 2630 MM TOTAL. ALL STAINLESS STEEL, POLYAMIDE CARPET. IN PERFECT WORKING CONDITION, LIKE NEW, YEAR 2012.

Ubicación: USED STAINLESS STEEL BLANCHER MADE BY KIREMKO BV WITH COOLER. DIAMETER 120 CM. LENGHT 3 M. 4 PCS AVAILABLE.