31 ofertas

Año de construcción: usado
Precio: 2.950 €
Ubicación: Land-blohm simplex

changes and errors in the technical data and information and subject to prior sale!
 BLOHM SIMPLEX CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 510 mm<br/>grinding width: 230 mm<br/>grinding wheel size: 300 mm<br/>weight: 1.300 kg<br/><br/><br/><br/><br/> GRINDING LENGTH: 510 MM
GRINDING WIDTH: 230 MM
GRINDING WHEEL SIZE: 300 MM
WEIGHT: 1.300 KG




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-2x16zav40s, 12 mw, 50 hz (new sulzer diesel)
refurbished to 0 hours and to the latest design and 750 kw/cyl.
overhaul in hamburg at blohm + voss
-modification of the cylinder lubrication (elimination of old cylinder marsoner and plug all holes)
-replacement of:
 
consumables
cylinder liner
starting valves
injection valves
piston
all bearings
gaskets
piston rings
hp pipes
pump element
support struts
bellows

these parts will be replaced if necessary (acc. sulzer instruction)
bottom end
valves and seats
springs
reconditioning of all components / replace parts out of tolerance.
overhaul t/c and cac
overhaul exhaust system
crankshaft polishing
overhaul of alternator
re-painting
 
 
price exw hamburg at blohm + voss
 
 
warranty no warranty on engines at the current location.
warranty is only given on parts supplied and work performed by mpc engineering gmbh or his contractors
 
payment conditions to be agreed

delivery time around 6 months
 2X16ZAV40S, 12 MW, 50 HZ (NEW SULZER DIESEL) REFURBISHED TO 0 HOURS AND TO THE LATEST DESIGN AND 750 KW/CYL. OVERHAUL IN HAMBURG AT BLOHM + VOSS -MODIFICATION OF THE CYLINDER LUBRICATION (ELIMINATION OF OLD CYLINDER MARSONER AND PLUG ALL HOLES) -REPLACEMENT OF: CONSUMABLES CYLINDER LINER STARTING VALVES INJECTION VALVES PISTON ALL BEARINGS GASKETS PISTON RINGS HP PIPES PUMP ELEMENT SUPPORT STRUTS BELLOWS THESE PARTS WILL BE REPLACED IF NECESSARY (ACC. SULZER INSTRUCTION) BOTTOM END VALVES AND SEATS SPRINGS RECONDITIONING OF ALL COMPONENTS / REPLACE PARTS OUT OF TOLERANCE. OVERHAUL T/C AND CAC OVERHAUL EXHAUST SYSTEM CRANKSHAFT POLISHING OVERHAUL OF ALTERNATOR RE-PAINTING PRICE EXW HAMBURG AT BLOHM + VOSS WARRANTY NO WARRANTY ON ENGINES AT THE CURRENT LOCATION. WARRANTY IS ONLY GIVEN ON PARTS SUPPLIED AND WORK PERFORMED BY MPC ENGINEERING GMBH OR HIS CONTRACTORS PAYMENT CONDITIONS TO BE AGREED DELIVERY TIME AROUND 6 MONTHS
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 1.900 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 2900 x 1700 x 2300 mm<br/>description: - magnetic plate size: 600 x 300 mm<br> - grinding: 400 x 600 x 430 mm<br> - control unit: finimatic WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 2900 X 1700 X 2300 MM
DESCRIPTION: - MAGNETIC PLATE SIZE: 600 X 300 MM
- GRINDING: 400 X 600 X 430 MM
- CONTROL UNIT: FINIMATIC
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 4689: 1 gebr. horizontal surface grinding machine
fabr. blohm, type 204, b. 1972 with arb.-ber.: 450 x 200 mm

NO. 4689: 1 GEBR. HORIZONTAL SURFACE GRINDING MACHINE FABR. BLOHM, TYPE 204, B. 1972 WITH ARB.-BER.: 450 X 200 MM
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-grinding length: 600 mm<br/>grinding width: 800 mm<br/>workpiece height: 580 mm<br/>total power requirement: 15 kw<br/>weight of the machine ca.: 5200 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> GRINDING LENGTH: 600 MM
GRINDING WIDTH: 800 MM
WORKPIECE HEIGHT: 580 MM
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 5200 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-clamping surface: 1020 x 300 mm; 
maximum grinding length: 600 mm; 
grinding width: 400 mm; 
greatest distance table to the spindle center: 600 mm; 

accessories:
coolant system, magnetic chuck 600 x 300 mm, 3 grinding wheel flanges, finimatic, machine light CLAMPING SURFACE: 1020 X 300 MM; MAXIMUM GRINDING LENGTH: 600 MM; GRINDING WIDTH: 400 MM; GREATEST DISTANCE TABLE TO THE SPINDLE CENTER: 600 MM; ACCESSORIES: COOLANT SYSTEM, MAGNETIC CHUCK 600 X 300 MM, 3 GRINDING WHEEL FLANGES, FINIMATIC, MACHINE LIGHT
Vendedor: Theo Stefan OG
Año de construcción: usado
Ubicación: Land-grinding length: 600 mm<br/>grinding width: 300 mm<br/>weight of the machine ca.: 2,9 t<br/>dimensions of the machine ca.:  m<br/>total power requirement:  kw<br/>workpiece height:  mm<br/>easytouch control<br/>electro magnet plate<br/>coolant device<br/>exhaustion device<br/>dressing device<br/>2 flanges<br/>machine has only 199 hours<br/><br/>technische daten: /technical details<br/>schleiflänge / grinding length    600    mm<br/>schleifbreite / grinding width    300    mm<br/>magnetspannplatte / electro magnet plate    600x300    mm<br/>verfahrweg x-hub / traverse path x-stroke    700    mm<br/>y-hub vertikal / y-stroke vertical    450    mm<br/>z-hub quer / z-stroke cross    280    mm<br/>abstand tisch ? spindelmitte / distance table ?spindle center    125-575    mm<br/>tischgeschwindigkeit x / table speed x    30-30000    mm/min.<br/>y / y    4-3750    mm/min.<br/>z / z    4-4000    mm/min.<br/>max. schleifscheibendimension / max. grinding wheel dimension    300x50x76,2    <br/>mm<br/>antriebsleistung schleifspindel / drive capacity    4,7    kw<br/>gewicht der maschine ca. / weight    2900    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> GRINDING LENGTH: 600 MM
GRINDING WIDTH: 300 MM
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS OF THE MACHINE CA.: M
TOTAL POWER REQUIREMENT: KW
WORKPIECE HEIGHT: MM
EASYTOUCH CONTROL
ELECTRO MAGNET PLATE
COOLANT DEVICE
EXHAUSTION DEVICE
DRESSING DEVICE
2 FLANGES
MACHINE HAS ONLY 199 HOURS

TECHNISCHE DATEN: /TECHNICAL DETAILS
SCHLEIFLäNGE / GRINDING LENGTH 600 MM
SCHLEIFBREITE / GRINDING WIDTH 300 MM
MAGNETSPANNPLATTE / ELECTRO MAGNET PLATE 600X300 MM
VERFAHRWEG X-HUB / TRAVERSE PATH X-STROKE 700 MM
Y-HUB VERTIKAL / Y-STROKE VERTICAL 450 MM
Z-HUB QUER / Z-STROKE CROSS 280 MM
ABSTAND TISCH ? SPINDELMITTE / DISTANCE TABLE ?SPINDLE CENTER 125-575 MM
TISCHGESCHWINDIGKEIT X / TABLE SPEED X 30-30000 MM/MIN.
Y / Y 4-3750 MM/MIN.
Z / Z 4-4000 MM/MIN.
MAX. SCHLEIFSCHEIBENDIMENSION / MAX. GRINDING WHEEL DIMENSION 300X50X76,2
MM
ANTRIEBSLEISTUNG SCHLEIFSPINDEL / DRIVE CAPACITY 4,7 KW
GEWICHT DER MASCHINE CA. / WEIGHT 2900 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-built in 2001
traverse paths x 700 y 450 z 280 mm
weight of 2,900 kg
mass 2,100 x 2.900 x 1,800 mm
table width 300 mm
table length 600 mm
grinding wheel diameter of 300 mm, min. 140 mm BUILT IN 2001 TRAVERSE PATHS X 700 Y 450 Z 280 MM WEIGHT OF 2,900 KG MASS 2,100 X 2.900 X 1,800 MM TABLE WIDTH 300 MM TABLE LENGTH 600 MM GRINDING WHEEL DIAMETER OF 300 MM, MIN. 140 MM
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Ubicación: Land-grinding length: 600 mm<br/>grinding width: 300 mm<br/>travel -x axis: 700 mm<br/>travel -y axis: 450 mm<br/>travel -z axis: 280 mm<br/>weight of the machine ca.: 3200 kg<br/><br/><br/><br/><br/> GRINDING LENGTH: 600 MM
GRINDING WIDTH: 300 MM
TRAVEL -X AXIS: 700 MM
TRAVEL -Y AXIS: 450 MM
TRAVEL -Z AXIS: 280 MM
WEIGHT OF THE MACHINE CA.: 3200 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 8.700 €
Ubicación: Land-DE Germany, 70469 Stuttgart
Vendedor: MATRACOM
Año de construcción: usado
Ubicación: Land-grinding length: 900 mm<br/>grinding width: 400 mm<br/>workpiece height: 600 mm<br/>total power requirement: 11 kw<br/>weight of the machine ca.: 4 t<br/><br/><br/><br/><br/> GRINDING LENGTH: 900 MM
GRINDING WIDTH: 400 MM
WORKPIECE HEIGHT: 600 MM
TOTAL POWER REQUIREMENT: 11 KW
WEIGHT OF THE MACHINE CA.: 4 T




Vendedor: PLASTICO TRADING GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
blohm used hfs-9 horizontal surface grinding machine with magnetic plate.

manufacturer: blohm
type: hfs 9

grinding length: 900 mm
grinding width: 400 mm
table se type 30/90, 110/220 v, 1.6/0.8 a
table size: 900 x 300 mm
workpiece height - max: 600 mm
maximum table load: 500 kg
spindle speed: 1400 / 2800
total power consumption: 11-13 kw

machine weight approx.  3.9 t
space requirement approx.  3800 x 2000 h 2300 mm
shipping size approx. 2500 x 1500 h 2300 mm

sightseeing in our warehouse in riesa possible.
changes and errors in the technical data, information and prices and subject to prior sale.
BLOHM USED HFS-9 HORIZONTAL SURFACE GRINDING MACHINE WITH MAGNETIC PLATE. MANUFACTURER: BLOHM TYPE: HFS 9 GRINDING LENGTH: 900 MM GRINDING WIDTH: 400 MM TABLE SE TYPE 30/90, 110/220 V, 1.6/0.8 A TABLE SIZE: 900 X 300 MM WORKPIECE HEIGHT - MAX: 600 MM MAXIMUM TABLE LOAD: 500 KG SPINDLE SPEED: 1400 / 2800 TOTAL POWER CONSUMPTION: 11-13 KW MACHINE WEIGHT APPROX. 3.9 T SPACE REQUIREMENT APPROX. 3800 X 2000 H 2300 MM SHIPPING SIZE APPROX. 2500 X 1500 H 2300 MM SIGHTSEEING IN OUR WAREHOUSE IN RIESA POSSIBLE. CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE.
Vendedor: Brand GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 1200 mm<br/>grinding width: 400 mm<br/>workpiece height:  mm<br/>x-axis: 1300 mm<br/>y-axis: 700 mm<br/>z-axis: 420 mm<br/>total power requirement: 11 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>hi-precision surface grinder with simple cnc-control<br/><br/><br/><br/><br/> GRINDING LENGTH: 1200 MM
GRINDING WIDTH: 400 MM
WORKPIECE HEIGHT: MM
X-AXIS: 1300 MM
Y-AXIS: 700 MM
Z-AXIS: 420 MM
TOTAL POWER REQUIREMENT: 11 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
HI-PRECISION SURFACE GRINDER WITH SIMPLE CNC-CONTROL




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-automatic vertical delivery
grinding area 600 x 350 mm at wheel width 50 mm
disk size 300 x 60 mm
spindle speed 1450 and 2800 rpm
grinding wheel drive 5 / 6 kw
.
footprint of 2.2 x 1.5 m
machine height 2.2 m
weight approx. 2.7 to
.
facilities:
-electromagnetic 600 x 300 mm
-finimatic senkrecht delivery
-hofmann glass scale,
and another according to the pictures AUTOMATIC VERTICAL DELIVERY GRINDING AREA 600 X 350 MM AT WHEEL WIDTH 50 MM DISK SIZE 300 X 60 MM SPINDLE SPEED 1450 AND 2800 RPM GRINDING WHEEL DRIVE 5 / 6 KW . FOOTPRINT OF 2.2 X 1.5 M MACHINE HEIGHT 2.2 M WEIGHT APPROX. 2.7 TO . FACILITIES: -ELECTROMAGNETIC 600 X 300 MM -FINIMATIC SENKRECHT DELIVERY -HOFMANN GLASS SCALE, AND ANOTHER ACCORDING TO THE PICTURES
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-grinding length:800 mm<br/>grinding width:600 mm<br/>workpiece height: mm<br/>max. distance table to spindle axis:700 mm<br/>max. table load:800 kg<br/>x-axis ? table longitudinal motion: <br/>table clamping area with additional space :1.200 x 600 mm<br/>table travel longitudinal max.:900 mm<br/>table speed:30 - 3.000/300 - 30.000 stufenlos regelbar  mm/min<br/>grinding path adjustment :Über setztasten im bedienpult <br/>guidance system:vorgespannte wälzführungen <br/>table drive :servo-motor mit kugelgewindetrieb <br/>manual table adjustment:Über joy-stick am bedienpult <br/>measuring system:0,001 mm rotatorisch <br/>y-axis ? vertical movement grinding disk: <br/>max. distance table to spindle axis:700 mm<br/>rapid traverse:3.750 m/min<br/>guidance system:vorgespannte wälzführungen <br/>drive system:servomotor mit kugelgewindespindel <br/>measuring system:0,001 mm rotatorisch <br/>z-axis ? cross movement grinding disk: <br/>automatic cross movement:max. 560  mm<br/>crossing path automatic:40 - 4.000 stufenlos  mm<br/>rapid traverse:4.000  mm/min<br/>guidance system:vorgespannte wälzführungen <br/>drive system:servomotor mit kugelgewindespindel <br/>measuring system:0,001 mm               rotatorisch <br/>grinding spindle:: <br/>grinding spindle speed max.:3.400 1/min<br/>electric capacity:15 kw<br/>three-phase motor with frequency converter: <br/>max. measures grinding wheel (da x b):400 x 80  mm<br/>inner bore:127  mm<br/>constant peripheral speed:35 m/sec<br/>max. peripheral speed:45 m/sec<br/>dressing:abrichtbetrag wird autom. kompensiert <br/>electric connection: <br/>connected load:19 kva<br/>voltage:400 v<br/>mains frequency :50 hz <br/>weight of the machine ca.:4900 kg<br/>dimensions of the machine ca.:4,6 x 4,2 x 2,45  m<br/><br/>blohm grinding control ergomatic movable setup console in the middle of the machine: electronic handwheels for conventional operation of the machine for axes y and z. joy stick for the axes x and z. feed control per axis via potentiometer, also active during program run.  control panel on support arm on the right side of the machine: lc display, visible area 121 x 103 mm, with backlight membrane keyboard with short-stroke keys for acknowledging recommended default values or for entry of freely selectable parameters with the following functions: - loading position x and z axis - set or change reversing points during the program - set zero points for y and z axis - set safety position - set grinding wheel data - select dressing function softkey for preselection measuring system metric / inch info button for help texts and service instructions display for operating hours and maintenance intervals  fixed programs for workshop-related, operator-friendly handling: - reciprocating loops with automatic y-feed - longitudinal, circumferential and surface grinding with intermittent or continuous crossfeed and automatic y positioning - grinding wheel adjustment with handwheel or automatic - eco loops with automatic y positioning: 1st layer: plunge grinding \ GRINDING LENGTH:800 MM
GRINDING WIDTH:600 MM
WORKPIECE HEIGHT: MM
MAX. DISTANCE TABLE TO SPINDLE AXIS:700 MM
MAX. TABLE LOAD:800 KG
X-AXIS ? TABLE LONGITUDINAL MOTION:
TABLE CLAMPING AREA WITH ADDITIONAL SPACE :1.200 X 600 MM
TABLE TRAVEL LONGITUDINAL MAX.:900 MM
TABLE SPEED:30 - 3.000/300 - 30.000 STUFENLOS REGELBAR MM/MIN
GRINDING PATH ADJUSTMENT :ÜBER SETZTASTEN IM BEDIENPULT
GUIDANCE SYSTEM:VORGESPANNTE WäLZFüHRUNGEN
TABLE DRIVE :SERVO-MOTOR MIT KUGELGEWINDETRIEB
MANUAL TABLE ADJUSTMENT:ÜBER JOY-STICK AM BEDIENPULT
MEASURING SYSTEM:0,001 MM ROTATORISCH
Y-AXIS ? VERTICAL MOVEMENT GRINDING DISK:
MAX. DISTANCE TABLE TO SPINDLE AXIS:700 MM
RAPID TRAVERSE:3.750 M/MIN
GUIDANCE SYSTEM:VORGESPANNTE WäLZFüHRUNGEN
DRIVE SYSTEM:SERVOMOTOR MIT KUGELGEWINDESPINDEL
MEASURING SYSTEM:0,001 MM ROTATORISCH
Z-AXIS ? CROSS MOVEMENT GRINDING DISK:
AUTOMATIC CROSS MOVEMENT:MAX. 560 MM
CROSSING PATH AUTOMATIC:40 - 4.000 STUFENLOS MM
RAPID TRAVERSE:4.000 MM/MIN
GUIDANCE SYSTEM:VORGESPANNTE WäLZFüHRUNGEN
DRIVE SYSTEM:SERVOMOTOR MIT KUGELGEWINDESPINDEL
MEASURING SYSTEM:0,001 MM ROTATORISCH
GRINDING SPINDLE::
GRINDING SPINDLE SPEED MAX.:3.400 1/MIN
ELECTRIC CAPACITY:15 KW
THREE-PHASE MOTOR WITH FREQUENCY CONVERTER:
MAX. MEASURES GRINDING WHEEL (DA X B):400 X 80 MM
INNER BORE:127 MM
CONSTANT PERIPHERAL SPEED:35 M/SEC
MAX. PERIPHERAL SPEED:45 M/SEC
DRESSING:ABRICHTBETRAG WIRD AUTOM. KOMPENSIERT
ELECTRIC CONNECTION:
CONNECTED LOAD:19 KVA
VOLTAGE:400 V
MAINS FREQUENCY :50 HZ
WEIGHT OF THE MACHINE CA.:4900 KG
DIMENSIONS OF THE MACHINE CA.:4,6 X 4,2 X 2,45 M

BLOHM GRINDING CONTROL ERGOMATIC MOVABLE SETUP CONSOLE IN THE MIDDLE OF THE MACHINE: ELECTRONIC HANDWHEELS FOR CONVENTIONAL OPERATION OF THE MACHINE FOR AXES Y AND Z. JOY STICK FOR THE AXES X AND Z. FEED CONTROL PER AXIS VIA POTENTIOMETER, ALSO ACTIVE DURING PROGRAM RUN. CONTROL PANEL ON SUPPORT ARM ON THE RIGHT SIDE OF THE MACHINE: LC DISPLAY, VISIBLE AREA 121 X 103 MM, WITH BACKLIGHT MEMBRANE KEYBOARD WITH SHORT-STROKE KEYS FOR ACKNOWLEDGING RECOMMENDED DEFAULT VALUES OR FOR ENTRY OF FREELY SELECTABLE PARAMETERS WITH THE FOLLOWING FUNCTIONS: - LOADING POSITION X AND Z AXIS - SET OR CHANGE REVERSING POINTS DURING THE PROGRAM - SET ZERO POINTS FOR Y AND Z AXIS - SET SAFETY POSITION - SET GRINDING WHEEL DATA - SELECT DRESSING FUNCTION SOFTKEY FOR PRESELECTION MEASURING SYSTEM METRIC / INCH INFO BUTTON FOR HELP TEXTS AND SERVICE INSTRUCTIONS DISPLAY FOR OPERATING HOURS AND MAINTENANCE INTERVALS FIXED PROGRAMS FOR WORKSHOP-RELATED, OPERATOR-FRIENDLY HANDLING: - RECIPROCATING LOOPS WITH AUTOMATIC Y-FEED - LONGITUDINAL, CIRCUMFERENTIAL AND SURFACE GRINDING WITH INTERMITTENT OR CONTINUOUS CROSSFEED AND AUTOMATIC Y POSITIONING - GRINDING WHEEL ADJUSTMENT WITH HANDWHEEL OR AUTOMATIC - ECO LOOPS WITH AUTOMATIC Y POSITIONING: 1ST LAYER: PLUNGE GRINDING \"ROUGHING\" 2ND LAYER: SURFACE GRINDING \"FINISHING\" 3RD LAYER: SURFACE GRINDING \"FINE FINISHING\" AUTOMATIC Y POSITIONING: 3 LAYERS WITH DRESSING, 10 PARAMETER SETS FOR 10 DELIVERY PROGRAMS STORABLE, ALLOWANCE OR FINISHED DIMENSION GRINDING PRESELECTABLE. DRESSING PROGRAMS: - STRAIGHT DRESSING FROM THE TABLE WITH COMPENSATION BY SINGLE DIAMOND, FOLDABLE DRESSING UNIT. - FACE DRESSING WITH SINGLE DIAMOND OR FOLDABLE DRESSING UNIT. - DRESSING WITH COMPENSATION BY AUTOMATIC STRAIGHTENING DEVICE. - DEEP DRESSING WITH COMPENSATION BY PEA-T100. COOLANT CLEANING EQUIPMENT COOLANT SYSTEM WITH BELT FILTER (TANK CAPACITY 1,400 L) CONSISTING OF: - BELT FILTER WITH A CLEANING SURFACE OF 2.25 M² FOR A FLOW RATE OF 250 L / MIN - SUPPLY PUMP 200 L / MIN, 4 BAR - ADDITIONAL PUMP FOR WATER TROUGH FLUSHING AND RINSING GUN - COOLING UNIT FOR COOLANT EMULSION WITH MAX. 5% GRINDING CONCENTRATE - POWER 4.9 KW (4,200 KCAL / H), REFRIGERANT CFC-FREE EQUIPMENT/ACCESSORIES - BASIC MACHINE WITH WORK ENCLOSURE CLOSED AT THE TOP - SPINDLE DRIVE 15 KW, FREQUENCY CONTROLLED - MANUAL BALANCING DEVICE MPM INCL. VIBRATION SENSOR AND SPEED SENSOR - BELT FILTER COOLANT CLEANING SYSTEM TANK CAPACITY 1,400 LITERS - PNEUMATICALLY FOLDING DRESSING UNIT - ELECTRO-PERMANENT MAGNETIC CLAMPING PLATE 800 X 600 MM, TRANSVERSE POLE PITCH 4 MM, WITH 8-FOLD ADHESION CONTROL - 2 PIECES OF GRINDING WHEEL FLANGES - 1 PC. BALANCING MANDREL - MACHINE DOCUMENTATION INCL. CE CONFORMITY DECLARATION - FINISH: RAL 5009 AZURE / RAL 9002 GRAY WHITE GRINDING SPINDLE INSERT RENEWED 02-2016
Vendedor: FLECKENSTEIN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 1200 mm	
grinding width: 500 mm	
workpiece height: 400 mm	
machine weight: 5000 kg	
 GRINDING LENGTH: 1200 MM GRINDING WIDTH: 500 MM WORKPIECE HEIGHT: 400 MM MACHINE WEIGHT: 5000 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-grinding length: 1200 mm<br/>grinding width: 400 mm<br/>grinding height: 450 /530 mm<br/>magnetic plate size: 1200x300 mm<br/>table-size: 1800x300 mm<br/>cross feed of the table: 350 mm<br/>longitudinal feed of the table: 1200 mm<br/>grinding wheel size: 300x100 mm<br/>max. width of grinding wheel: 50 mm<br/>max. dia. of grinding wheel: 150-400 mm<br/>grinding wheel speeds: 1.450-2.880 u/min<br/>total power requirement: 1800x300 kw<br/>weight of the machine ca.: 3,1 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> GRINDING LENGTH: 1200 MM
GRINDING WIDTH: 400 MM
GRINDING HEIGHT: 450 /530 MM
MAGNETIC PLATE SIZE: 1200X300 MM
TABLE-SIZE: 1800X300 MM
CROSS FEED OF THE TABLE: 350 MM
LONGITUDINAL FEED OF THE TABLE: 1200 MM
GRINDING WHEEL SIZE: 300X100 MM
MAX. WIDTH OF GRINDING WHEEL: 50 MM
MAX. DIA. OF GRINDING WHEEL: 150-400 MM
GRINDING WHEEL SPEEDS: 1.450-2.880 U/MIN
TOTAL POWER REQUIREMENT: 1800X300 KW
WEIGHT OF THE MACHINE CA.: 3,1 T
DIMENSIONS OF THE MACHINE CA.: M



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-steam turbine
	type: b + v, marc2 - b10, back pressure with extraction
	live steam pressure 58 bar 60.5 bar max
	live steam temp.: 510 ° c
	steam quantity: 45 t / h
	extraction pressure: 21 bar 24.0 bar max
	extraction temp.: 383 ° c 490 ° c max
	extraction quantity: 7 t / h t 15 / h max
	exhaust pressure: 3 bar 4 bar max
	exhaust temp. : 180 ° c 262 ° c max
	exhaust quantity: 28 t / h 47 t / h max
	speed: 10.043 rpm
	quick closing speed: 11,047 rpm
gearbox
generator
	manufacturer leroy somer
	kv voltage 5.25
	frequency 50 hz
	speed of 1,500 rpm maximum 1,800 rpm
	power: 9,000 kva
	power factor: 0.8

year of construction 2005
operating hours: 16,000
   STEAM TURBINE TYPE: B + V, MARC2 - B10, BACK PRESSURE WITH EXTRACTION LIVE STEAM PRESSURE 58 BAR 60.5 BAR MAX LIVE STEAM TEMP.: 510 ° C STEAM QUANTITY: 45 T / H EXTRACTION PRESSURE: 21 BAR 24.0 BAR MAX EXTRACTION TEMP.: 383 ° C 490 ° C MAX EXTRACTION QUANTITY: 7 T / H T 15 / H MAX EXHAUST PRESSURE: 3 BAR 4 BAR MAX EXHAUST TEMP. : 180 ° C 262 ° C MAX EXHAUST QUANTITY: 28 T / H 47 T / H MAX SPEED: 10.043 RPM QUICK CLOSING SPEED: 11,047 RPM GEARBOX GENERATOR MANUFACTURER LEROY SOMER KV VOLTAGE 5.25 FREQUENCY 50 HZ SPEED OF 1,500 RPM MAXIMUM 1,800 RPM POWER: 9,000 KVA POWER FACTOR: 0.8 YEAR OF CONSTRUCTION 2005 OPERATING HOURS: 16,000
Vendedor: Ahrend Consulting GmbH
Año de construcción: usado
Ubicación: Land-technical data see below (click to enlarge) TECHNICAL DATA SEE BELOW (CLICK TO ENLARGE)
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-surface grinding machine

manufacturer: blohm
type: hfs 12.3
year of construction: 1963
control type: conventional
item condition: good

technical details
grinding length: 1,200 mm
grinding width: 400 mm
grinding height (new/used disc): 450/530 mm
magnetic plates dimensions (l x w): 1200 x 300 mm
table dimensions (l x w): 1800 x 300 mm
transverse movement of the table: 350 mm
longitudinal movement of table: 1200 mm
aufspannnuten: 3 pcs. / distance 90 mm / 14 mm wide
grinding wheel dimensions: 300 x 100 mm
wheel width: 50 mm
grinding wheel diameter min./max: 150/400 mm
grinding wheel speed range: 1,450 / u/min for 2,880
total power consumption: 8.5 kw
weight: 3,100 kg
documentation: complete incl. lubricants and electrical diagrams and
spare parts lists

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  SURFACE GRINDING MACHINE MANUFACTURER: BLOHM TYPE: HFS 12.3 YEAR OF CONSTRUCTION: 1963 CONTROL TYPE: CONVENTIONAL ITEM CONDITION: GOOD TECHNICAL DETAILS GRINDING LENGTH: 1,200 MM GRINDING WIDTH: 400 MM GRINDING HEIGHT (NEW/USED DISC): 450/530 MM MAGNETIC PLATES DIMENSIONS (L X W): 1200 X 300 MM TABLE DIMENSIONS (L X W): 1800 X 300 MM TRANSVERSE MOVEMENT OF THE TABLE: 350 MM LONGITUDINAL MOVEMENT OF TABLE: 1200 MM AUFSPANNNUTEN: 3 PCS. / DISTANCE 90 MM / 14 MM WIDE GRINDING WHEEL DIMENSIONS: 300 X 100 MM WHEEL WIDTH: 50 MM GRINDING WHEEL DIAMETER MIN./MAX: 150/400 MM GRINDING WHEEL SPEED RANGE: 1,450 / U/MIN FOR 2,880 TOTAL POWER CONSUMPTION: 8.5 KW WEIGHT: 3,100 KG DOCUMENTATION: COMPLETE INCL. LUBRICANTS AND ELECTRICAL DIAGRAMS AND SPARE PARTS LISTS CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-grinder blohm, universa
machine no. 324
built in 1964 GRINDER BLOHM, UNIVERSA MACHINE NO. 324 BUILT IN 1964
Vendedor: Herr Kurt Hinst
Año de construcción: usado
Precio: 8.500 CHF
Ubicación: Land-technical data:

-clamping surface d. table max: 760 x 200 mm
-magnetic clamping plate maximum clamping surface: 450 x 200 mm
-maximum grinding length: 460 mm
-largest grinding width: 230 mm (wheel width 25 mm)
-largest distance table to the centre of the spindle: 520 mm
-transverse movement of the table maximum: 215 mm
-longitudinal movement of the table maximum: 510 mm
-spindle speed: 1400-2800 rpm
-grinding wheel d x b x d: 300 x 25 x 76mm
-machine size: 1600 x 1300 x 1850 mm
-machine weight: 1300 kg
	
  TECHNICAL DATA: -CLAMPING SURFACE D. TABLE MAX: 760 X 200 MM -MAGNETIC CLAMPING PLATE MAXIMUM CLAMPING SURFACE: 450 X 200 MM -MAXIMUM GRINDING LENGTH: 460 MM -LARGEST GRINDING WIDTH: 230 MM (WHEEL WIDTH 25 MM) -LARGEST DISTANCE TABLE TO THE CENTRE OF THE SPINDLE: 520 MM -TRANSVERSE MOVEMENT OF THE TABLE MAXIMUM: 215 MM -LONGITUDINAL MOVEMENT OF THE TABLE MAXIMUM: 510 MM -SPINDLE SPEED: 1400-2800 RPM -GRINDING WHEEL D X B X D: 300 X 25 X 76MM -MACHINE SIZE: 1600 X 1300 X 1850 MM -MACHINE WEIGHT: 1300 KG
Vendedor: Müller-Maschinen AG
Año de construcción: usado
Ubicación: Land-surface grinding machine blohm hfs 9v
yom 1986
clamping table 1400mm x 300mm
magnet table 600/900mm x 300mm
x-axis travel: 900 mm
y-axis travel 300 mm
z-axis travel 560 mm SURFACE GRINDING MACHINE BLOHM HFS 9V YOM 1986 CLAMPING TABLE 1400MM X 300MM MAGNET TABLE 600/900MM X 300MM X-AXIS TRAVEL: 900 MM Y-AXIS TRAVEL 300 MM Z-AXIS TRAVEL 560 MM
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-<br>grinding length: 1200 mm<br>grinding width: 400 mm<br>grinding height: 600 mm<br>wheel diameter: 400 mm <br>blohm hfs12<br />
surface grinding machine<br />
technical data<br />
table length	1800 	mm <br />
table width	300 	mm <br />
grinding length	1200 	mm <br />
grinding width	400 	mm <br />
execution:	 	 <br />
    hydraulic	 	 <br />
max. distance from table	 	 <br />
    to spindle-centreline	600 	mm <br />
longitudinal travel (x-axis)	1200 	mm <br />
transversal travel (y axis)	360 	mm <br />
automatic cross-feed:	 	 <br />
    stepless	 	 <br />
       from	0.002 	m/min <br />
       up to	0.065 	m/min <br />
table speeds:	 	 <br />
    stepless	 	 <br />
       from	2 	m/min <br />
       up to	30 	m/min <br />
automatic vertical feed:	 	 <br />
diameter of grinding wheel	400 	mm <br />
width of the grinding wheel	80 	mm <br />
wheel int. diameter	76 	mm 
GRINDING LENGTH: 1200 MM
GRINDING WIDTH: 400 MM
GRINDING HEIGHT: 600 MM
WHEEL DIAMETER: 400 MM
BLOHM HFS12
SURFACE GRINDING MACHINE
TECHNICAL DATA
TABLE LENGTH 1800 MM&NBSP;
TABLE WIDTH 300 MM&NBSP;
GRINDING LENGTH 1200 MM&NBSP;
GRINDING WIDTH 400 MM&NBSP;
EXECUTION: &NBSP;
&NBSP; &NBSP; HYDRAULIC &NBSP;
MAX. DISTANCE FROM TABLE &NBSP;
&NBSP; &NBSP; TO SPINDLE-CENTRELINE 600 MM&NBSP;
LONGITUDINAL TRAVEL (X-AXIS) 1200 MM&NBSP;
TRANSVERSAL TRAVEL (Y AXIS) 360 MM&NBSP;
AUTOMATIC CROSS-FEED: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 0.002 M/MIN&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 0.065 M/MIN&NBSP;
TABLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 2 M/MIN&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 30 M/MIN&NBSP;
AUTOMATIC VERTICAL FEED: &NBSP;
DIAMETER OF GRINDING WHEEL 400 MM&NBSP;
WIDTH OF THE GRINDING WHEEL 80 MM&NBSP;
WHEEL INT. DIAMETER 76 MM&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-<br>grinding length (mm) 700<br>grinding width (mm) 350<br>grinding height (mm) <br>wheel diameter (mm) 300<br>
GRINDING LENGTH (MM) 700
GRINDING WIDTH (MM) 350
GRINDING HEIGHT (MM)
WHEEL DIAMETER (MM) 300
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-<br>grinding length (mm) 460<br>grinding width (mm) 230<br>grinding height (mm) 370<br>wheel diameter (mm) 300<br>
GRINDING LENGTH (MM) 460
GRINDING WIDTH (MM) 230
GRINDING HEIGHT (MM) 370
WHEEL DIAMETER (MM) 300
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-<br>grinding length (mm) 800<br>grinding width (mm) 400<br>grinding height (mm) 500<br>wheel diameter (mm) 400<br>
GRINDING LENGTH (MM) 800
GRINDING WIDTH (MM) 400
GRINDING HEIGHT (MM) 500
WHEEL DIAMETER (MM) 400
Vendedor: Muller Machines SA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)