524 ofertas

Año de construcción: usado
Ubicación: Land-used, year 2001.

ima avantage is 8200 a single-sided automatic edge shipping glue and finishing machine

in law execution
edge gluing with synthetic resin hot melt adhesive

technical data:
edging material:
a) veneer / coils and strips
b) plastic / coils and strips
c) solid wood mouldings
= edge height approx. 14-55 mm
edge thickness = approx. 0.4 20 mm
plate thickness = approx. 10-50 mm
min. panel width = 60 mm
min. panel length = 150 mm
max edge cross section:
-bar = approx. 20 x 50 mm
-pvc = approx. 3 x 55 mm
plates recusal from
the chain conveyor = 35 mm
drive for speed of
8-20 m / min, mech. infinitely variable

feed speed 4-20 m / min.

imatronic 121 with system software - integrated software plc replaced separate programmable machine controller
programming largely s5 compatible
-integrated control with maximum 64 routes features

486-compact pc industrial design with front panel (protection class ip 65),
hard disk 200 mb (minimum), ram 4 mb
floppy drive 3â½ "1.44 mb, screen color lcd

trimming unit 08.376
formatted to the edges after milling/calibration
workpieces or for milling of lateral grooves.
profiles, or folding
with 2 motors a 3.0 kw, 12000 rpm, 200 hz,
motor 1 in the tracking and motor 2 in the opposite direction working,

spotlight 300 lg, 1,5 kw, to the
preheating the workpiece edge

gluing unit 283.1513, straight edge 3 mm + bars

min. length of strip - simple/multiple roller 150 mm
min bar length 300 mm
min. strip height 14 mm
strip height 50 mm
maximum bar length at high hood 1200 mm

gluing unit designed for the pure mode,.

glue specification 0.8 l for pur glue
compl. m. cartridge & connectors

before melting pan approx. 1 l
regulated with a heating capacity 3 x 400 w

08.421, 2 motors, the top pressure mounted end-trimming unit
to the caps of the front and rear edges or edges overhang.
for caps cuts flush or with a chamfer, with 2 hm - cap saw blade 160 x 22 mm z = 48
min. plate recusal: approx. 30 mm + max edge or strip thickness
min. panel length: approx. 150 mm
min. distance between 2 pieces approx. 650 mm
maximum working speed: 20 m / min.
front / hinterkantentastschuh aussteuerbar
with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
max edge height 55 mm maximum edge thickness 20 mm
static frequency converter for motors
> 0.75 to 1.5 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz hor. pneum.. swivel device 0 + 10 â° for caps 08.421 per motor
with pneumatic ausrã¼ckbarer page keying, manually positioned on digital display.

milling unit 08.055 for 2 motors with heights keying, groping at the side,
up to 30 degrees, without tools with mechanical digital display 09 for the horizontal and vertical adjustment with single suction nozzle
before milling from above and below
with 1 motor of 1850 w, 400 v, 200 hz, 12000 rpm
20 degrees tilting working ikl658078 in the opposite direction
static frequency converter for motors > 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz ikl658648 motor with hsk holder
with side key skid for 1 motor, for the cracks, plate off and profile milling, ikl658805 2 st
linear axis for vertical motor positioning of the height of keying, fine adjustment

2 st pneumatic adjustment of the automatic upgrade at thin / thick edge or decommissioning at last

sound swallowing/guard for compound and 1 milling unit, suction connector 2 x 80 upwards,
locking mechanism according to the regulations of the bg

multiple processing unit 08.346,
to the fine milling and profile milling of the upper longitudinal edge as well as the front and rear edge.
with height and page keying,.
pneumatic feed motion horizontally and vertically.
with manual motor positioning in axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
with quick change facility, without any tools, including static frequency converters with automatic brake device. height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min. min. workpiece thickness at the corners copy 16 mm.

linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge)
 
tool hsk-25r to the copy / cut for r1-r3 only original equipment

multiple processing unit 08.346,
to the fine milling and profile milling the bottom lengthwise edge, as well as the front and rear edge, with height and page scanner,,
pneumatic feed motion horizontally and vertically. with manual motor positioning in
axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,
with quick change facility, without any tools, including static frequency converter,.
with automatic brake device, height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min.
min. werkstã¼ckdick corners copying 16 mm.
linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge) ikl0079659 79659 1 st
tool hsk-25r to the copy / cut for r1-r3 only original equipment

sound swallowing/guard with 2 hood suction nozzle ã?100 mm, below the transport chain, length 1200 mm

groove/groove/profile milling unit 08.183,
for cutting through side or bottom grooves, rebates or profiles, 1 motor
flã¤chennuten max to workpiece recusal minus 10 mm, swivel, without keying,
maximum engine power 3 kw without tool
with mechanical digital readout for the horizontal and vertical adjustment
 with 1 motor 3.0 kw, 12000 rpm, 200 hz, kns 51
maximum machining cross-section ca 20 m / min. approx. 70 qmm
working in the tracking
static frequency converter for motors
> 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz electro-pneumatic control of usage for the groove/groove/profilfrã¤sagg
sound swallowing/guard length 600-1050 mm

course reserve for 1 kantenschleif-unit with pre-wiring

profile scraping unit 08.519
the after scraping a upper and lower machined viertelkreisprofiles on glued on plastic edging materials, with pre-set hm scraper tools.
with height keying, side momentary mechanical digital display 09 for the horizontal and vertical adjustment, with electro-pneumatic horizontal jackshaft device for the upper and lower pulling blades unit with electro-pneumatic vertical release device for the lower unit of scraper
with single suction nozzle.
height 235 mm, min. workpiece thickness 16 mm iklr2 2 st
r = 2 mm
 
1 adjustment axis vertically for the profile scraper 08.519
dust-catching box for profile scraping unit

course reserve for 1 profile scraper with pre-wiring

auto-sensing scraping unit 08.50
to remove hot melt adhesives from the periphery of workpiece upper and subpages, controllable, with 2 cutting plates,
workpiece recusal min with 2 air nozzles to clean blow of the scraper 30 mm

course reserve for detergent indication with pre-wiring

fasschleif/buffing unit 08.612, not oscillating, after cleaning the top and bottom flush milled kantenmateriales or thick edges, polishing pivots on a vertical and horizontal axis
with 2 motors 0.25 kw, 230/400v, 50 hz, 1500 rpm.
with 1 polishing wheel diameter. 40 x 200 x 18
height 235 mm

pneumatic release device for the buffing unit 08.612

1 set of schwabbelscheiben2 st
for the aforementioned buffing unit 08.612 running in sticky-brite
complete with mounts
 
smoothness aggregate 08.53
to smooth the milled and
drawn out pvc/abs profile edge, for r = 1,3-4 mm, 1 upper and 1 lower smoothness zone,
min. workpiece thickness with horizontal pneumatic clutch device 16 mm

machine is still connected and can be seen in operation.
sale from location near stuttgart

the technical description comes from the original-from the manufacturer
 

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: from site's terms & conditions apply

USED, YEAR 2001. IMA AVANTAGE IS 8200 A SINGLE-SIDED AUTOMATIC EDGE SHIPPING GLUE AND FINISHING MACHINE IN LAW EXECUTION EDGE GLUING WITH SYNTHETIC RESIN HOT MELT ADHESIVE TECHNICAL DATA: EDGING MATERIAL: A) VENEER / COILS AND STRIPS B) PLASTIC / COILS AND STRIPS C) SOLID WOOD MOULDINGS = EDGE HEIGHT APPROX. 14-55 MM EDGE THICKNESS = APPROX. 0.4 20 MM PLATE THICKNESS = APPROX. 10-50 MM MIN. PANEL WIDTH = 60 MM MIN. PANEL LENGTH = 150 MM MAX EDGE CROSS SECTION: -BAR = APPROX. 20 X 50 MM -PVC = APPROX. 3 X 55 MM PLATES RECUSAL FROM THE CHAIN CONVEYOR = 35 MM DRIVE FOR SPEED OF 8-20 M / MIN, MECH. INFINITELY VARIABLE FEED SPEED 4-20 M / MIN. IMATRONIC 121 WITH SYSTEM SOFTWARE - INTEGRATED SOFTWARE PLC REPLACED SEPARATE PROGRAMMABLE MACHINE CONTROLLER PROGRAMMING LARGELY S5 COMPATIBLE -INTEGRATED CONTROL WITH MAXIMUM 64 ROUTES FEATURES 486-COMPACT PC INDUSTRIAL DESIGN WITH FRONT PANEL (PROTECTION CLASS IP 65), HARD DISK 200 MB (MINIMUM), RAM 4 MB FLOPPY DRIVE 3½ "1.44 MB, SCREEN COLOR LCD TRIMMING UNIT 08.376 FORMATTED TO THE EDGES AFTER MILLING/CALIBRATION WORKPIECES OR FOR MILLING OF LATERAL GROOVES. PROFILES, OR FOLDING WITH 2 MOTORS A 3.0 KW, 12000 RPM, 200 HZ, MOTOR 1 IN THE TRACKING AND MOTOR 2 IN THE OPPOSITE DIRECTION WORKING, SPOTLIGHT 300 LG, 1,5 KW, TO THE PREHEATING THE WORKPIECE EDGE GLUING UNIT 283.1513, STRAIGHT EDGE 3 MM + BARS MIN. LENGTH OF STRIP - SIMPLE/MULTIPLE ROLLER 150 MM MIN BAR LENGTH 300 MM MIN. STRIP HEIGHT 14 MM STRIP HEIGHT 50 MM MAXIMUM BAR LENGTH AT HIGH HOOD 1200 MM GLUING UNIT DESIGNED FOR THE PURE MODE,. GLUE SPECIFICATION 0.8 L FOR PUR GLUE COMPL. M. CARTRIDGE & CONNECTORS BEFORE MELTING PAN APPROX. 1 L REGULATED WITH A HEATING CAPACITY 3 X 400 W 08.421, 2 MOTORS, THE TOP PRESSURE MOUNTED END-TRIMMING UNIT TO THE CAPS OF THE FRONT AND REAR EDGES OR EDGES OVERHANG. FOR CAPS CUTS FLUSH OR WITH A CHAMFER, WITH 2 HM - CAP SAW BLADE 160 X 22 MM Z = 48 MIN. PLATE RECUSAL: APPROX. 30 MM + MAX EDGE OR STRIP THICKNESS MIN. PANEL LENGTH: APPROX. 150 MM MIN. DISTANCE BETWEEN 2 PIECES APPROX. 650 MM MAXIMUM WORKING SPEED: 20 M / MIN. FRONT / HINTERKANTENTASTSCHUH AUSSTEUERBAR WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. MAX EDGE HEIGHT 55 MM MAXIMUM EDGE THICKNESS 20 MM STATIC FREQUENCY CONVERTER FOR MOTORS > 0.75 TO 1.5 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ HOR. PNEUM.. SWIVEL DEVICE 0 + 10 ° FOR CAPS 08.421 PER MOTOR WITH PNEUMATIC AUSRüCKBARER PAGE KEYING, MANUALLY POSITIONED ON DIGITAL DISPLAY. MILLING UNIT 08.055 FOR 2 MOTORS WITH HEIGHTS KEYING, GROPING AT THE SIDE, UP TO 30 DEGREES, WITHOUT TOOLS WITH MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH SINGLE SUCTION NOZZLE BEFORE MILLING FROM ABOVE AND BELOW WITH 1 MOTOR OF 1850 W, 400 V, 200 HZ, 12000 RPM 20 DEGREES TILTING WORKING IKL658078 IN THE OPPOSITE DIRECTION STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ IKL658648 MOTOR WITH HSK HOLDER WITH SIDE KEY SKID FOR 1 MOTOR, FOR THE CRACKS, PLATE OFF AND PROFILE MILLING, IKL658805 2 ST LINEAR AXIS FOR VERTICAL MOTOR POSITIONING OF THE HEIGHT OF KEYING, FINE ADJUSTMENT 2 ST PNEUMATIC ADJUSTMENT OF THE AUTOMATIC UPGRADE AT THIN / THICK EDGE OR DECOMMISSIONING AT LAST SOUND SWALLOWING/GUARD FOR COMPOUND AND 1 MILLING UNIT, SUCTION CONNECTOR 2 X 80 UPWARDS, LOCKING MECHANISM ACCORDING TO THE REGULATIONS OF THE BG MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING OF THE UPPER LONGITUDINAL EDGE AS WELL AS THE FRONT AND REAR EDGE. WITH HEIGHT AND PAGE KEYING,. PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTERS WITH AUTOMATIC BRAKE DEVICE. HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WORKPIECE THICKNESS AT THE CORNERS COPY 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING THE BOTTOM LENGTHWISE EDGE, AS WELL AS THE FRONT AND REAR EDGE, WITH HEIGHT AND PAGE SCANNER,, PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM, WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTER,. WITH AUTOMATIC BRAKE DEVICE, HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WERKSTüCKDICK CORNERS COPYING 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) IKL0079659 79659 1 ST TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT SOUND SWALLOWING/GUARD WITH 2 HOOD SUCTION NOZZLE �100 MM, BELOW THE TRANSPORT CHAIN, LENGTH 1200 MM GROOVE/GROOVE/PROFILE MILLING UNIT 08.183, FOR CUTTING THROUGH SIDE OR BOTTOM GROOVES, REBATES OR PROFILES, 1 MOTOR FLäCHENNUTEN MAX TO WORKPIECE RECUSAL MINUS 10 MM, SWIVEL, WITHOUT KEYING, MAXIMUM ENGINE POWER 3 KW WITHOUT TOOL WITH MECHANICAL DIGITAL READOUT FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH 1 MOTOR 3.0 KW, 12000 RPM, 200 HZ, KNS 51 MAXIMUM MACHINING CROSS-SECTION CA 20 M / MIN. APPROX. 70 QMM WORKING IN THE TRACKING STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ ELECTRO-PNEUMATIC CONTROL OF USAGE FOR THE GROOVE/GROOVE/PROFILFRäSAGG SOUND SWALLOWING/GUARD LENGTH 600-1050 MM COURSE RESERVE FOR 1 KANTENSCHLEIF-UNIT WITH PRE-WIRING PROFILE SCRAPING UNIT 08.519 THE AFTER SCRAPING A UPPER AND LOWER MACHINED VIERTELKREISPROFILES ON GLUED ON PLASTIC EDGING MATERIALS, WITH PRE-SET HM SCRAPER TOOLS. WITH HEIGHT KEYING, SIDE MOMENTARY MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT, WITH ELECTRO-PNEUMATIC HORIZONTAL JACKSHAFT DEVICE FOR THE UPPER AND LOWER PULLING BLADES UNIT WITH ELECTRO-PNEUMATIC VERTICAL RELEASE DEVICE FOR THE LOWER UNIT OF SCRAPER WITH SINGLE SUCTION NOZZLE. HEIGHT 235 MM, MIN. WORKPIECE THICKNESS 16 MM IKLR2 2 ST R = 2 MM 1 ADJUSTMENT AXIS VERTICALLY FOR THE PROFILE SCRAPER 08.519 DUST-CATCHING BOX FOR PROFILE SCRAPING UNIT COURSE RESERVE FOR 1 PROFILE SCRAPER WITH PRE-WIRING AUTO-SENSING SCRAPING UNIT 08.50 TO REMOVE HOT MELT ADHESIVES FROM THE PERIPHERY OF WORKPIECE UPPER AND SUBPAGES, CONTROLLABLE, WITH 2 CUTTING PLATES, WORKPIECE RECUSAL MIN WITH 2 AIR NOZZLES TO CLEAN BLOW OF THE SCRAPER 30 MM COURSE RESERVE FOR DETERGENT INDICATION WITH PRE-WIRING FASSCHLEIF/BUFFING UNIT 08.612, NOT OSCILLATING, AFTER CLEANING THE TOP AND BOTTOM FLUSH MILLED KANTENMATERIALES OR THICK EDGES, POLISHING PIVOTS ON A VERTICAL AND HORIZONTAL AXIS WITH 2 MOTORS 0.25 KW, 230/400V, 50 HZ, 1500 RPM. WITH 1 POLISHING WHEEL DIAMETER. 40 X 200 X 18 HEIGHT 235 MM PNEUMATIC RELEASE DEVICE FOR THE BUFFING UNIT 08.612 1 SET OF SCHWABBELSCHEIBEN2 ST FOR THE AFOREMENTIONED BUFFING UNIT 08.612 RUNNING IN STICKY-BRITE COMPLETE WITH MOUNTS SMOOTHNESS AGGREGATE 08.53 TO SMOOTH THE MILLED AND DRAWN OUT PVC/ABS PROFILE EDGE, FOR R = 1,3-4 MM, 1 UPPER AND 1 LOWER SMOOTHNESS ZONE, MIN. WORKPIECE THICKNESS WITH HORIZONTAL PNEUMATIC CLUTCH DEVICE 16 MM MACHINE IS STILL CONNECTED AND CAN BE SEEN IN OPERATION. SALE FROM LOCATION NEAR STUTTGART THE TECHNICAL DESCRIPTION COMES FROM THE ORIGINAL-FROM THE MANUFACTURER HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: FROM SITE'S TERMS & CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 210 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 500 x 400 mm<br/>description: very good condition cleaned  data erased and testet cores: 4 processor: intel core (tm) i5-6500 cpu 3,20 ghz (6. generation) clock speed: 3,20 ghz chipset: skylake  storage/hdd: 500 gb hdd ram: 8 gb ddr3 (3 slots free)  set: mmx, sse4.2, avx2, 64bit, nx, vmx optical drive: no  graphics: on board  sound: on board interfaces: 1x hdmi, 2x display port, 4x usb 3.0 (hinten), 2x usb 2.0 (hinten), seriell, ps2, 2x usb 2.0 (vorne), 2x usb 3.0 (vorne), audio, lan (rj-45) WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 500 X 400 MM
DESCRIPTION: VERY GOOD CONDITION CLEANED DATA ERASED AND TESTET CORES: 4 PROCESSOR: INTEL CORE (TM) I5-6500 CPU 3,20 GHZ (6. GENERATION) CLOCK SPEED: 3,20 GHZ CHIPSET: SKYLAKE STORAGE/HDD: 500 GB HDD RAM: 8 GB DDR3 (3 SLOTS FREE) SET: MMX, SSE4.2, AVX2, 64BIT, NX, VMX OPTICAL DRIVE: NO GRAPHICS: ON BOARD SOUND: ON BOARD INTERFACES: 1X HDMI, 2X DISPLAY PORT, 4X USB 3.0 (HINTEN), 2X USB 2.0 (HINTEN), SERIELL, PS2, 2X USB 2.0 (VORNE), 2X USB 3.0 (VORNE), AUDIO, LAN (RJ-45)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04145

planer thicknesser scm / wood force fs 41 elite tersa

year 2014, as new
approx. 10 hours

minimax elite - the heavy machines line of craft and industry leading-edge technology of the scm group
with tersa planer blade quick-change system for instant planer blade change
 
drum 㸠87 mm / tersa knife 4 piece

surface planer:
total length of tables: 2,000 mm
task length: 1.034 mm
table height: 870 mm
working width: 410 mm
serrated table lips
depth of cut: max 5 mm

thickness planer:
thicknessing table dimensions: 775 x 423 mm
working height: min. 3 / max. 230 mm
speeds: 6 / 12 m / min

speed: 5,200 1/min
motor power: 5 kw / 400v oblique steel feed roller for constant and uniform wood feeding toothed
feed rate with a separate engine and two-speed
numeric display for the thickness table height

execution:
tersa planer blade quick change system
tersa knife shaft for instant planer blade change
especially quiet running
   
the 2000 mm long dressing tables allow easy dressing of large workpieces
work tables are made of cast iron to annealed, and hardened, this insensitive and permanently plan,
stable large dressing aluminium stop with rod guide (1200 x 160 mm)
planing unit adjustment via hand wheel with numeric display for the planing height
the high weight of the machine ensures highest precision and smooth operation
powerful industrial motor
robust steel / cast iron construction
stable, large dressing fence made of aluminium (1200 x 160 mm) with precise round rod steel guide suction nozzle diameter: 2 x 120 mm
machine ready, incl. el. connection cable with 16a plug
1 set spare tersa knife
1 spare drive belt
1 set of technical documentation: user manual, el. wiring diagrams, parts list

machine prepared for mounting a milling
 
shipping size: 2000 x 800 x 1200 mm, approx. 500 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock our general terms and conditions apply NO. 04145 PLANER THICKNESSER SCM / WOOD FORCE FS 41 ELITE TERSA YEAR 2014, AS NEW APPROX. 10 HOURS MINIMAX ELITE - THE HEAVY MACHINES LINE OF CRAFT AND INDUSTRY LEADING-EDGE TECHNOLOGY OF THE SCM GROUP WITH TERSA PLANER BLADE QUICK-CHANGE SYSTEM FOR INSTANT PLANER BLADE CHANGE DRUM &ATILDE;&CEDIL; 87 MM / TERSA KNIFE 4 PIECE SURFACE PLANER: TOTAL LENGTH OF TABLES: 2,000 MM TASK LENGTH: 1.034 MM TABLE HEIGHT: 870 MM WORKING WIDTH: 410 MM SERRATED TABLE LIPS DEPTH OF CUT: MAX 5 MM THICKNESS PLANER: THICKNESSING TABLE DIMENSIONS: 775 X 423 MM WORKING HEIGHT: MIN. 3 / MAX. 230 MM SPEEDS: 6 / 12 M / MIN SPEED: 5,200 1/MIN MOTOR POWER: 5 KW / 400V OBLIQUE STEEL FEED ROLLER FOR CONSTANT AND UNIFORM WOOD FEEDING TOOTHED FEED RATE WITH A SEPARATE ENGINE AND TWO-SPEED NUMERIC DISPLAY FOR THE THICKNESS TABLE HEIGHT EXECUTION: TERSA PLANER BLADE QUICK CHANGE SYSTEM TERSA KNIFE SHAFT FOR INSTANT PLANER BLADE CHANGE ESPECIALLY QUIET RUNNING THE 2000 MM LONG DRESSING TABLES ALLOW EASY DRESSING OF LARGE WORKPIECES WORK TABLES ARE MADE OF CAST IRON TO ANNEALED, AND HARDENED, THIS INSENSITIVE AND PERMANENTLY PLAN, STABLE LARGE DRESSING ALUMINIUM STOP WITH ROD GUIDE (1200 X 160 MM) PLANING UNIT ADJUSTMENT VIA HAND WHEEL WITH NUMERIC DISPLAY FOR THE PLANING HEIGHT THE HIGH WEIGHT OF THE MACHINE ENSURES HIGHEST PRECISION AND SMOOTH OPERATION POWERFUL INDUSTRIAL MOTOR ROBUST STEEL / CAST IRON CONSTRUCTION STABLE, LARGE DRESSING FENCE MADE OF ALUMINIUM (1200 X 160 MM) WITH PRECISE ROUND ROD STEEL GUIDE SUCTION NOZZLE DIAMETER: 2 X 120 MM MACHINE READY, INCL. EL. CONNECTION CABLE WITH 16A PLUG 1 SET SPARE TERSA KNIFE 1 SPARE DRIVE BELT 1 SET OF TECHNICAL DOCUMENTATION: USER MANUAL, EL. WIRING DIAGRAMS, PARTS LIST MACHINE PREPARED FOR MOUNTING A MILLING SHIPPING SIZE: 2000 X 800 X 1200 MM, APPROX. 500 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 210 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 500 x 400 mm<br/>description: very good condition cleaned  data erased and testet cores: 4 processor: intel core (tm) i5-6500 cpu 3,20 ghz (6. generation) clock speed: 3,20 ghz chipset: skylake  storage/hdd: 500 gb hdd ram: 8 gb ddr3 (3 slots free)  set: mmx, sse4.2, avx2, 64bit, nx, vmx optical drive: no  graphics: on board  sound: on board interfaces: 1x hdmi, 2x display port, 4x usb 3.0 (hinten), 2x usb 2.0 (hinten), seriell, ps2, 2x usb 2.0 (vorne), 2x usb 3.0 (vorne), audio, lan (rj-45) WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 500 X 400 MM
DESCRIPTION: VERY GOOD CONDITION CLEANED DATA ERASED AND TESTET CORES: 4 PROCESSOR: INTEL CORE (TM) I5-6500 CPU 3,20 GHZ (6. GENERATION) CLOCK SPEED: 3,20 GHZ CHIPSET: SKYLAKE STORAGE/HDD: 500 GB HDD RAM: 8 GB DDR3 (3 SLOTS FREE) SET: MMX, SSE4.2, AVX2, 64BIT, NX, VMX OPTICAL DRIVE: NO GRAPHICS: ON BOARD SOUND: ON BOARD INTERFACES: 1X HDMI, 2X DISPLAY PORT, 4X USB 3.0 (HINTEN), 2X USB 2.0 (HINTEN), SERIELL, PS2, 2X USB 2.0 (VORNE), 2X USB 3.0 (VORNE), AUDIO, LAN (RJ-45)
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.000 
Ubicación: Land-description
sell inverters sma sunny mini central smc 7000tl vdc max 700 v type
vdc mpp 333 - 500v
college no 50/60 hz
idc max 22 has
cap name 7000 w iac no 31a
cos 1

. vde0126.1.1 02.06

price 1000 departure bondy 93 inverter solar smc 7000 tl performant
performance 98% optimal performance of adaptation through regulation optitrac mpp cooling system opticool transformerless flexible phased power classes can be combined with the sunny mini central 9000tl and 10000tl/11000tl is suitable for installation indoor and outdoor switch disconnector dc integrated electronic solar switch (ess) service adm worldwide with service in line input (dc) voltage dc max. 700 v input maximum 22.0 a number of 1s mpp trackers nettle (ac) power ac max 7000 w rated voltage ac 220 v - 240 v ac 50 hz mains frequency / 60 hz performance performance maximum 98.0% interfaces: rs485 optional radio
battery gel, agm, lead, kit and solar panels, converter, charge regulator. solar inverter for injection network

a recovered on rosny under wood 93110 06.89.74.18.83 DESCRIPTION SELL INVERTERS SMA SUNNY MINI CENTRAL SMC 7000TL VDC MAX 700 V TYPE VDC MPP 333 - 500V COLLEGE NO 50/60 HZ IDC MAX 22 HAS CAP NAME 7000 W IAC NO 31A COS 1 . VDE0126.1.1 02.06 PRICE 1000 DEPARTURE BONDY 93 INVERTER SOLAR SMC 7000 TL PERFORMANT PERFORMANCE 98% OPTIMAL PERFORMANCE OF ADAPTATION THROUGH REGULATION OPTITRAC MPP COOLING SYSTEM OPTICOOL TRANSFORMERLESS FLEXIBLE PHASED POWER CLASSES CAN BE COMBINED WITH THE SUNNY MINI CENTRAL 9000TL AND 10000TL/11000TL IS SUITABLE FOR INSTALLATION INDOOR AND OUTDOOR SWITCH DISCONNECTOR DC INTEGRATED ELECTRONIC SOLAR SWITCH (ESS) SERVICE ADM WORLDWIDE WITH SERVICE IN LINE INPUT (DC) VOLTAGE DC MAX. 700 V INPUT MAXIMUM 22.0 A NUMBER OF 1S MPP TRACKERS NETTLE (AC) POWER AC MAX 7000 W RATED VOLTAGE AC 220 V - 240 V AC 50 HZ MAINS FREQUENCY / 60 HZ PERFORMANCE PERFORMANCE MAXIMUM 98.0% INTERFACES: RS485 OPTIONAL RADIO BATTERY GEL, AGM, LEAD, KIT AND SOLAR PANELS, CONVERTER, CHARGE REGULATOR. SOLAR INVERTER FOR INJECTION NETWORK A RECOVERED ON ROSNY UNDER WOOD 93110 06.89.74.18.83
Vendedor: negomat industrie
Año de construcción: usado
Precio: used machinery auction RESALE 210 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 500 x 400 mm<br/>description: very good condition cleaned  data erased and testet cores: 4 processor: intel core (tm) i5-6500 cpu 3,20 ghz (6. generation) clock speed: 3,20 ghz chipset: skylake  storage/hdd: 500 gb hdd ram: 8 gb ddr3 (3 slots free)  set: mmx, sse4.2, avx2, 64bit, nx, vmx optical drive: no  graphics: on board  sound: on board interfaces: 1x hdmi, 2x display port, 4x usb 3.0 (hinten), 2x usb 2.0 (hinten), seriell, ps2, 2x usb 2.0 (vorne), 2x usb 3.0 (vorne), audio, lan (rj-45) WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 500 X 400 MM
DESCRIPTION: VERY GOOD CONDITION CLEANED DATA ERASED AND TESTET CORES: 4 PROCESSOR: INTEL CORE (TM) I5-6500 CPU 3,20 GHZ (6. GENERATION) CLOCK SPEED: 3,20 GHZ CHIPSET: SKYLAKE STORAGE/HDD: 500 GB HDD RAM: 8 GB DDR3 (3 SLOTS FREE) SET: MMX, SSE4.2, AVX2, 64BIT, NX, VMX OPTICAL DRIVE: NO GRAPHICS: ON BOARD SOUND: ON BOARD INTERFACES: 1X HDMI, 2X DISPLAY PORT, 4X USB 3.0 (HINTEN), 2X USB 2.0 (HINTEN), SERIELL, PS2, 2X USB 2.0 (VORNE), 2X USB 3.0 (VORNE), AUDIO, LAN (RJ-45)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-it is a used lippelt mini rustica bunroll line for sale.
the system is fully functional and has been used for test purposes only after the reconditioning, it is in very good condition.
this rolls-con special rolls can be produced in rectangular form. the system has a long infeed conveyor and various cutting rollers. it is adjustable to the length of the dough pieces.
easy operation of the machine.
the rolls plant is sold on behalf of customer.

price on request. IT IS A USED LIPPELT MINI RUSTICA BUNROLL LINE FOR SALE. THE SYSTEM IS FULLY FUNCTIONAL AND HAS BEEN USED FOR TEST PURPOSES ONLY AFTER THE RECONDITIONING, IT IS IN VERY GOOD CONDITION. THIS ROLLS-CON SPECIAL ROLLS CAN BE PRODUCED IN RECTANGULAR FORM. THE SYSTEM HAS A LONG INFEED CONVEYOR AND VARIOUS CUTTING ROLLERS. IT IS ADJUSTABLE TO THE LENGTH OF THE DOUGH PIECES. EASY OPERATION OF THE MACHINE. THE ROLLS PLANT IS SOLD ON BEHALF OF CUSTOMER. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 210 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 500 x 400 mm<br/>description: very good condition cleaned  data erased and testet cores: 4 processor: intel core (tm) i5-6500 cpu 3,20 ghz (6. generation) clock speed: 3,20 ghz chipset: skylake  storage/hdd: 500 gb hdd ram: 8 gb ddr3 (3 slots free)  set: mmx, sse4.2, avx2, 64bit, nx, vmx optical drive: no  graphics: on board  sound: on board interfaces: 1x hdmi, 2x display port, 4x usb 3.0 (hinten), 2x usb 2.0 (hinten), seriell, ps2, 2x usb 2.0 (vorne), 2x usb 3.0 (vorne), audio, lan (rj-45) WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 500 X 400 MM
DESCRIPTION: VERY GOOD CONDITION CLEANED DATA ERASED AND TESTET CORES: 4 PROCESSOR: INTEL CORE (TM) I5-6500 CPU 3,20 GHZ (6. GENERATION) CLOCK SPEED: 3,20 GHZ CHIPSET: SKYLAKE STORAGE/HDD: 500 GB HDD RAM: 8 GB DDR3 (3 SLOTS FREE) SET: MMX, SSE4.2, AVX2, 64BIT, NX, VMX OPTICAL DRIVE: NO GRAPHICS: ON BOARD SOUND: ON BOARD INTERFACES: 1X HDMI, 2X DISPLAY PORT, 4X USB 3.0 (HINTEN), 2X USB 2.0 (HINTEN), SERIELL, PS2, 2X USB 2.0 (VORNE), 2X USB 3.0 (VORNE), AUDIO, LAN (RJ-45)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-max. workpiece length: 410mm, connected load: 18kva, controls: ge fanuc series o-tt, weight: 2t, including bar loader iemca mini boss 325 cnc/ 32, bar diameter: 6-20mm, weight: 850kg, year of construction: 1996.  MAX. WORKPIECE LENGTH: 410MM, CONNECTED LOAD: 18KVA, CONTROLS: GE FANUC SERIES O-TT, WEIGHT: 2T, INCLUDING BAR LOADER IEMCA MINI BOSS 325 CNC/ 32, BAR DIAMETER: 6-20MM, WEIGHT: 850KG, YEAR OF CONSTRUCTION: 1996.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 210 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 500 x 400 mm<br/>description: very good condition cleaned  data erased and testet cores: 4 processor: intel core (tm) i5-6500 cpu 3,20 ghz (6. generation) clock speed: 3,20 ghz chipset: skylake  storage/hdd: 500 gb hdd ram: 8 gb ddr3 (3 slots free)  set: mmx, sse4.2, avx2, 64bit, nx, vmx optical drive: no  graphics: on board  sound: on board interfaces: 1x hdmi, 2x display port, 4x usb 3.0 (hinten), 2x usb 2.0 (hinten), seriell, ps2, 2x usb 2.0 (vorne), 2x usb 3.0 (vorne), audio, lan (rj-45) WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 500 X 400 MM
DESCRIPTION: VERY GOOD CONDITION CLEANED DATA ERASED AND TESTET CORES: 4 PROCESSOR: INTEL CORE (TM) I5-6500 CPU 3,20 GHZ (6. GENERATION) CLOCK SPEED: 3,20 GHZ CHIPSET: SKYLAKE STORAGE/HDD: 500 GB HDD RAM: 8 GB DDR3 (3 SLOTS FREE) SET: MMX, SSE4.2, AVX2, 64BIT, NX, VMX OPTICAL DRIVE: NO GRAPHICS: ON BOARD SOUND: ON BOARD INTERFACES: 1X HDMI, 2X DISPLAY PORT, 4X USB 3.0 (HINTEN), 2X USB 2.0 (HINTEN), SERIELL, PS2, 2X USB 2.0 (VORNE), 2X USB 3.0 (VORNE), AUDIO, LAN (RJ-45)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine ran until recently.

technical data:

brand: stama

type: mc010

control: fanuc om

year: 1987

work area: longitudinal stroke x axis 500 mm
vertical stroke z-axis 300 mm
cross stroke y-axis 380 mm

table size / working area 650 x 380 mm
table load approx. 200 kg
height between table/spindle 240-540 mm
projection to the spindle center approx. 350 mm

tool mounting sk 30
spindle speeds 1,500-6,000 rpm
feed rates / rapid traverse max up to 1,000-4,000 m / 15 m / min.
drilling/milling capacity in st 20 mm / 130 cm â³
milling in aluminium 500 cm3

ac main drive approx. 3.7 / 5,5 kw
total drive approx. 12 kw - 380 v - 50 hz
weight approx. 2,300 kg MACHINE RAN UNTIL RECENTLY. TECHNICAL DATA: BRAND: STAMA TYPE: MC010 CONTROL: FANUC OM YEAR: 1987 WORK AREA: LONGITUDINAL STROKE X AXIS 500 MM VERTICAL STROKE Z-AXIS 300 MM CROSS STROKE Y-AXIS 380 MM TABLE SIZE / WORKING AREA 650 X 380 MM TABLE LOAD APPROX. 200 KG HEIGHT BETWEEN TABLE/SPINDLE 240-540 MM PROJECTION TO THE SPINDLE CENTER APPROX. 350 MM TOOL MOUNTING SK 30 SPINDLE SPEEDS 1,500-6,000 RPM FEED RATES / RAPID TRAVERSE MAX UP TO 1,000-4,000 M / 15 M / MIN. DRILLING/MILLING CAPACITY IN ST 20 MM / 130 CM &ACIRC;&SUP3; MILLING IN ALUMINIUM 500 CM3 AC MAIN DRIVE APPROX. 3.7 / 5,5 KW TOTAL DRIVE APPROX. 12 KW - 380 V - 50 HZ WEIGHT APPROX. 2,300 KG
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-capacity: 55000  bottles/h<br />max. filling pressure: 7  bar<br />volume product-ring bowl: 550  l  <br />power consumption: 25 kw<br />weight: 19  t<br />formats:  bottle formats: 0,33 l vichy-bottles, 0,5 l nrw-bottles, bottle diameter: 50-75 mm, bottle height: 150-330 mm<br />machine pitch: filling valves: 130, division of the valves: 87 mm, closure heads: 26, division of the closure heads: 87 mm<br />direction:  right-left<br />operation / control:  siemens s7<br />basic construction: 10 calotte feet<br />equipment: filling valves with integrated hot water scouring, automatic filling height adjustment, foaming by means of automatically positioning hde, bottle control, air co2 sterilizer,<br />accessories: closing container with mini / maxi contact, mechanical quick clamping for format parts<br /> CAPACITY: 55000 BOTTLES/H
MAX. FILLING PRESSURE: 7 BAR
VOLUME PRODUCT-RING BOWL: 550 L
POWER CONSUMPTION: 25 KW
WEIGHT: 19 T
FORMATS: BOTTLE FORMATS: 0,33 L VICHY-BOTTLES, 0,5 L NRW-BOTTLES, BOTTLE DIAMETER: 50-75 MM, BOTTLE HEIGHT: 150-330 MM
MACHINE PITCH: FILLING VALVES: 130, DIVISION OF THE VALVES: 87 MM, CLOSURE HEADS: 26, DIVISION OF THE CLOSURE HEADS: 87 MM
DIRECTION: RIGHT-LEFT
OPERATION / CONTROL: SIEMENS S7
BASIC CONSTRUCTION: 10 CALOTTE FEET
EQUIPMENT: FILLING VALVES WITH INTEGRATED HOT WATER SCOURING, AUTOMATIC FILLING HEIGHT ADJUSTMENT, FOAMING BY MEANS OF AUTOMATICALLY POSITIONING HDE, BOTTLE CONTROL, AIR CO2 STERILIZER,
ACCESSORIES: CLOSING CONTAINER WITH MINI / MAXI CONTACT, MECHANICAL QUICK CLAMPING FOR FORMAT PARTS
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-the erdkabelschã¤ler master 140 serves the peeling of underground cables, cable with steel reinforcement, cable with aluminium and lead reinforcement, as well as cables with pvc and rubber casing with a diameter of approximately 30 mm.

the master of 140 is equipped with a massive two blade system for "breaking up" reinforced cable. both knives can be set separately on each required cutting depth.

the peeling machine is equipped with foot switch and is ce compliant.

technical data
diameter cable: 30 mm to 140 mm
cutting speed: 12 m / min
drive: 6 kw - 380 v
dimensions: l 1.800 x w 1.000 x h 1.200 mm
weight: 600 kg
number of blades: 2 THE ERDKABELSCH&ATILDE;&CURREN;LER MASTER 140 SERVES THE PEELING OF UNDERGROUND CABLES, CABLE WITH STEEL REINFORCEMENT, CABLE WITH ALUMINIUM AND LEAD REINFORCEMENT, AS WELL AS CABLES WITH PVC AND RUBBER CASING WITH A DIAMETER OF APPROXIMATELY 30 MM. THE MASTER OF 140 IS EQUIPPED WITH A MASSIVE TWO BLADE SYSTEM FOR "BREAKING UP" REINFORCED CABLE. BOTH KNIVES CAN BE SET SEPARATELY ON EACH REQUIRED CUTTING DEPTH. THE PEELING MACHINE IS EQUIPPED WITH FOOT SWITCH AND IS CE COMPLIANT. TECHNICAL DATA DIAMETER CABLE: 30 MM TO 140 MM CUTTING SPEED: 12 M / MIN DRIVE: 6 KW - 380 V DIMENSIONS: L 1.800 X W 1.000 X H 1.200 MM WEIGHT: 600 KG NUMBER OF BLADES: 2
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-1,0 qm, electric, moveable, include \r\n4 decks (with steam) 600 x 400 mm,\r\nproofer for 6 plates 600 x 400 mm\r\nsteam condenser skg shop\r\ncondition as it is - cpl. assembled loaded\r\n 1,0 QM, ELECTRIC, MOVEABLE, INCLUDE \R\N4 DECKS (WITH STEAM) 600 X 400 MM,\R\NPROOFER FOR 6 PLATES 600 X 400 MM\R\NSTEAM CONDENSER SKG SHOP\R\NCONDITION AS IT IS - CPL. ASSEMBLED LOADED\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-control fanuc o-tc, feeder fmb minimag 3 m.
maximum rotating diameter. 12.7 mm
max speed 12000 rpm.
longitudinal stroke z 1 160 mm
rapid traverse 30 m / min.
maximum thrust force 125 dan
radial stroke x 1 85 mm
weight approx. 2.0 t
tool-holder carriage 1: fixed tool holder 5
accessories: coolant system. CONTROL FANUC O-TC, FEEDER FMB MINIMAG 3 M. MAXIMUM ROTATING DIAMETER. 12.7 MM MAX SPEED 12000 RPM. LONGITUDINAL STROKE Z 1 160 MM RAPID TRAVERSE 30 M / MIN. MAXIMUM THRUST FORCE 125 DAN RADIAL STROKE X 1 85 MM WEIGHT APPROX. 2.0 T TOOL-HOLDER CARRIAGE 1: FIXED TOOL HOLDER 5 ACCESSORIES: COOLANT SYSTEM.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-1,0 qm, electric, moveable, include \r\n4 decks (with steam) 600 x 400 mm,\r\nproofer for 6 plates 600 x 400 mm\r\nsteam condenser skg shop\r\ncondition as it is - cpl. assembled loaded 1,0 QM, ELECTRIC, MOVEABLE, INCLUDE \R\N4 DECKS (WITH STEAM) 600 X 400 MM,\R\NPROOFER FOR 6 PLATES 600 X 400 MM\R\NSTEAM CONDENSER SKG SHOP\R\NCONDITION AS IT IS - CPL. ASSEMBLED LOADED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hydraulic bending machines
manufacturer: dr. hochstrate
type:sbm 3000 x 6
year of manufacture: 2004

material width: 3.000 mm
material thickness: 6 mm (with a tensile strength of 400 n / mm2)
bending angle: 130°
minimum bending radius: 3 x plate thickness
minimum length: 10 x plate thickness
size: 4550 x 1720 x 2200 mm
weight: 4.300 kg
  HYDRAULIC BENDING MACHINES MANUFACTURER: DR. HOCHSTRATE TYPE:SBM 3000 X 6 YEAR OF MANUFACTURE: 2004 MATERIAL WIDTH: 3.000 MM MATERIAL THICKNESS: 6 MM (WITH A TENSILE STRENGTH OF 400 N / MM2) BENDING ANGLE: 130° MINIMUM BENDING RADIUS: 3 X PLATE THICKNESS MINIMUM LENGTH: 10 X PLATE THICKNESS SIZE: 4550 X 1720 X 2200 MM WEIGHT: 4.300 KG
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-hook + bowl aluminium, contains approx. 120 l\r\nmotor for hook 27/22 kw, 380 v, 2930/1460 rpm.\r\nmotor for scraper  approx. 1,1 kw, 380 v, HOOK + BOWL ALUMINIUM, CONTAINS APPROX. 120 L\R\NMOTOR FOR HOOK 27/22 KW, 380 V, 2930/1460 RPM.\R\NMOTOR FOR SCRAPER APPROX. 1,1 KW, 380 V,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 5.400 €
Ubicación: Land--40 [mm] roll shaft diameter,
-3 driving rolls,
-standard roll Ø165 [mm],
-70 x 1.5 [mm] round tube capacity,
-2? gas inches (3.2 mm) capacity,
-50 x 50 x 6 [mm] angle iron capacity,
-bending speeds 20% faster than competitive machines,
-forged roll shafts precision ground and fitted for maximum performance and minimal deflection,
-heavy duty structure and rigid components for high section modulus ratings,
-reinforced engineered mainframe design proven to outperform competitive models,
-patented by ercolina simultaneous downfeed and roll movement to minimize deformation,
-programmable touchpad controls with digital center roll positioning display,
-remote pendent with low voltage controls and foot pedal switch.
-power supply: 380-440 [v],
-motor: 1.85 [kw].

-dimensions: 650 x 102 x 148 [mm],
-weight: 300 [kg] approx.

are included:

-universal die / roll set,
-dies for round tubing bending : Ø 1 -40 [MM] ROLL SHAFT DIAMETER, -3 DRIVING ROLLS, -STANDARD ROLL Ø165 [MM], -70 X 1.5 [MM] ROUND TUBE CAPACITY, -2? GAS INCHES (3.2 MM) CAPACITY, -50 X 50 X 6 [MM] ANGLE IRON CAPACITY, -BENDING SPEEDS 20% FASTER THAN COMPETITIVE MACHINES, -FORGED ROLL SHAFTS PRECISION GROUND AND FITTED FOR MAXIMUM PERFORMANCE AND MINIMAL DEFLECTION, -HEAVY DUTY STRUCTURE AND RIGID COMPONENTS FOR HIGH SECTION MODULUS RATINGS, -REINFORCED ENGINEERED MAINFRAME DESIGN PROVEN TO OUTPERFORM COMPETITIVE MODELS, -PATENTED BY ERCOLINA SIMULTANEOUS DOWNFEED AND ROLL MOVEMENT TO MINIMIZE DEFORMATION, -PROGRAMMABLE TOUCHPAD CONTROLS WITH DIGITAL CENTER ROLL POSITIONING DISPLAY, -REMOTE PENDENT WITH LOW VOLTAGE CONTROLS AND FOOT PEDAL SWITCH. -POWER SUPPLY: 380-440 [V], -MOTOR: 1.85 [KW]. -DIMENSIONS: 650 X 102 X 148 [MM], -WEIGHT: 300 [KG] APPROX. ARE INCLUDED: -UNIVERSAL DIE / ROLL SET, -DIES FOR ROUND TUBING BENDING : Ø 1"1/4 (42.4 MM) + 1/2" (21.3 MM), -1 ERCOLINA SERVICE KEY, -1 SET OF PRECISION SPACERS FOR THE DIES. MACHINE IN PERFECT CONDITION, VISIBLE UNDER POWER FOR INSPECTION AND TRIAL. PRICE VAT EXCLUDED, EX WORKS LOADING ON TRUCK INCLUDED. SHIPPING IN FRANCE AND EUROPE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-cap. approx. 150 kg/h  depends on the bread\r\nmachine is o.k. for moist + dry bread\r\nsieve holes are 6 mm CAP. APPROX. 150 KG/H DEPENDS ON THE BREAD\R\NMACHINE IS O.K. FOR MOIST + DRY BREAD\R\NSIEVE HOLES ARE 6 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 58.950 €
Ubicación: Land-fully equipped 5-axis cnc bar machining centre elumatec sbz 150 / 9.00 m in fully working, good condition (without defects)
 
-aluminium machining: drilling, milling, thread cutting, sawing and notching - machining in steel: drilling, milling, thread cutting - electronic 5-axes industrial pc control with 6-page editing (including from below with angle head)- automatic tool changer for 8 standard and 3 special tools - with cutting saw for aluminum - automatic tensioner - movement with automatic correction - 12 collet chucks
-2-circle clamping system
-automatic length measurement on the profile bar
-network connection
-office software with dongle "drilling system"
-chip tray
-swivel angle of the a - and c - axis freely programmable - maximum machining length 9.220 mm (8,850 mm with end or end processing) procedures: - x - axis 9.610 mm (speed 60 m / min)-y axis 1000 mm (speed 30 m / min)-z axis 630 mm (speed 30 m /) min) - swing angle a-0 â°-90 â° axis freely programmable - swivel angle c axis 0 â° - 350 â° freely programmable - spindle speed of 21,000 rpm - spindle performance up to 15000 w - needed floor space for the machine: 15, 00 m x 5, 00 m the machine can during the prod visit uktion. the machine has been editing (is) used in single-shift operation only for the aluminum.
 
...................................................................................

5 axis power for universal use, type elumatec sbz 150 / 9.00 m
in good running condition

-processing in aluminum: drilling, routing, taping, cutting and mask
-processing in steel: drilling, routing, taping
-electronic 5 of axis industrial pc control
-six side processing (from the bottom with angle head)
-maximum processing length with profile end processing 9.220 mm (without profile end processing 8,850 mm)
-automatic tool changer with eight standard tools and three specialty tools (special tools: sawblade, angle cutter head and special)
-automatic clamp recognition and positioning
-clamps 12
-dual circuit clamping system
-network connectivity
-office software "three of a kind with system"
-pivoting angles at a - and c - axis free programable
 travelling capacity:
-x of axis 9.610mm (speed diameter 60m / min)
-y of axis 1000 mm (speed diameter 30m / min)
-z of axis 630mm (speed diameter 30m / min)
-axis pivoting angles a-0 â° - 90 â° free programable
-pivoting angles c of axis 0 â° 350â° free processor'(pdp)
-tool spindle speed 21,000 r.p.m.
-maximum power output at spindle 15,000 w - space: 15, 00 m x 5, 00 m
 FULLY EQUIPPED 5-AXIS CNC BAR MACHINING CENTRE ELUMATEC SBZ 150 / 9.00 M IN FULLY WORKING, GOOD CONDITION (WITHOUT DEFECTS) -ALUMINIUM MACHINING: DRILLING, MILLING, THREAD CUTTING, SAWING AND NOTCHING - MACHINING IN STEEL: DRILLING, MILLING, THREAD CUTTING - ELECTRONIC 5-AXES INDUSTRIAL PC CONTROL WITH 6-PAGE EDITING (INCLUDING FROM BELOW WITH ANGLE HEAD)- AUTOMATIC TOOL CHANGER FOR 8 STANDARD AND 3 SPECIAL TOOLS - WITH CUTTING SAW FOR ALUMINUM - AUTOMATIC TENSIONER - MOVEMENT WITH AUTOMATIC CORRECTION - 12 COLLET CHUCKS -2-CIRCLE CLAMPING SYSTEM -AUTOMATIC LENGTH MEASUREMENT ON THE PROFILE BAR -NETWORK CONNECTION -OFFICE SOFTWARE WITH DONGLE "DRILLING SYSTEM" -CHIP TRAY -SWIVEL ANGLE OF THE A - AND C - AXIS FREELY PROGRAMMABLE - MAXIMUM MACHINING LENGTH 9.220 MM (8,850 MM WITH END OR END PROCESSING) PROCEDURES: - X - AXIS 9.610 MM (SPEED 60 M / MIN)-Y AXIS 1000 MM (SPEED 30 M / MIN)-Z AXIS 630 MM (SPEED 30 M /) MIN) - SWING ANGLE A-0 &ACIRC;&DEG;-90 &ACIRC;&DEG; AXIS FREELY PROGRAMMABLE - SWIVEL ANGLE C AXIS 0 &ACIRC;&DEG; - 350 &ACIRC;&DEG; FREELY PROGRAMMABLE - SPINDLE SPEED OF 21,000 RPM - SPINDLE PERFORMANCE UP TO 15000 W - NEEDED FLOOR SPACE FOR THE MACHINE: 15, 00 M X 5, 00 M THE MACHINE CAN DURING THE PROD VISIT UKTION. THE MACHINE HAS BEEN EDITING (IS) USED IN SINGLE-SHIFT OPERATION ONLY FOR THE ALUMINUM. ................................................................................... 5 AXIS POWER FOR UNIVERSAL USE, TYPE ELUMATEC SBZ 150 / 9.00 M IN GOOD RUNNING CONDITION -PROCESSING IN ALUMINUM: DRILLING, ROUTING, TAPING, CUTTING AND MASK -PROCESSING IN STEEL: DRILLING, ROUTING, TAPING -ELECTRONIC 5 OF AXIS INDUSTRIAL PC CONTROL -SIX SIDE PROCESSING (FROM THE BOTTOM WITH ANGLE HEAD) -MAXIMUM PROCESSING LENGTH WITH PROFILE END PROCESSING 9.220 MM (WITHOUT PROFILE END PROCESSING 8,850 MM) -AUTOMATIC TOOL CHANGER WITH EIGHT STANDARD TOOLS AND THREE SPECIALTY TOOLS (SPECIAL TOOLS: SAWBLADE, ANGLE CUTTER HEAD AND SPECIAL) -AUTOMATIC CLAMP RECOGNITION AND POSITIONING -CLAMPS 12 -DUAL CIRCUIT CLAMPING SYSTEM -NETWORK CONNECTIVITY -OFFICE SOFTWARE "THREE OF A KIND WITH SYSTEM" -PIVOTING ANGLES AT A - AND C - AXIS FREE PROGRAMABLE TRAVELLING CAPACITY: -X OF AXIS 9.610MM (SPEED DIAMETER 60M / MIN) -Y OF AXIS 1000 MM (SPEED DIAMETER 30M / MIN) -Z OF AXIS 630MM (SPEED DIAMETER 30M / MIN) -AXIS PIVOTING ANGLES A-0 &ACIRC;&DEG; - 90 &ACIRC;&DEG; FREE PROGRAMABLE -PIVOTING ANGLES C OF AXIS 0 &ACIRC;&DEG; 350&ACIRC;&DEG; FREE PROCESSOR'(PDP) -TOOL SPINDLE SPEED 21,000 R.P.M. -MAXIMUM POWER OUTPUT AT SPINDLE 15,000 W - SPACE: 15, 00 M X 5, 00 M
Vendedor: M. Hille Import & Export technischer Anlagen
Año de construcción: usado
Ubicación: Land-aluminium frame with design for 9 x 4 = 36 berliner, \r\ndimension: 830 x 470 x 75 mm\r\n6 frames with trolley ALUMINIUM FRAME WITH DESIGN FOR 9 X 4 = 36 BERLINER, \R\NDIMENSION: 830 X 470 X 75 MM\R\N6 FRAMES WITH TROLLEY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data:

work area: 2,500 x 1,250 x 115 mm
control: siemens sinumerik 840 d
laser power: 3,200 watts
maximum sheet thickness mild steel: 20 mm
maximum sheet thickness stainless steel: 12 mm
maximum sheet thickness aluminium: 8 mm standard equipment:

-closed machine frame with integrated laser unit
-automatic pallet changer
-tft color display
-position laser diode
-spraying device
-motion unit for high-precision machining
-additional highly dynamic axis yp
-drives with maintenance-free ac servo motors
-closed beam delivery
-conveyor for small parts and waste
-nitroline
-flyline
-infeed end detection

trumpf laser:

-co2 laser truflow 4000
-high-frequency excitation
-maintenance-friendly turbo centrifugal blower
-gas mixer (integrated)
-laser power control
-logbook function laser

cutting head:

-laserschneidopf with 5 "lens
-laserschneidopf with 7.5 "lens
-universal quick exchange device
-controlline

control:

-control siemens sinumerik 840 d
-automatic switch-off
-contourline
-sprintline
-teleservice
-microweld
-rj45 network connector
-3.5 "floppy disk drive
-network connection via tele-diagnosis

security:

-ce marking
-light barrier
-multi-chamber exhaust system
-compact collector
-shop floor programming

(errors and omissions in the technical data, information and prices and subject to prior sale!) 
 TECHNICAL DATA: WORK AREA: 2,500 X 1,250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS MILD STEEL: 20 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL: 12 MM MAXIMUM SHEET THICKNESS ALUMINIUM: 8 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER -TFT COLOR DISPLAY -POSITION LASER DIODE -SPRAYING DEVICE -MOTION UNIT FOR HIGH-PRECISION MACHINING -ADDITIONAL HIGHLY DYNAMIC AXIS YP -DRIVES WITH MAINTENANCE-FREE AC SERVO MOTORS -CLOSED BEAM DELIVERY -CONVEYOR FOR SMALL PARTS AND WASTE -NITROLINE -FLYLINE -INFEED END DETECTION TRUMPF LASER: -CO2 LASER TRUFLOW 4000 -HIGH-FREQUENCY EXCITATION -MAINTENANCE-FRIENDLY TURBO CENTRIFUGAL BLOWER -GAS MIXER (INTEGRATED) -LASER POWER CONTROL -LOGBOOK FUNCTION LASER CUTTING HEAD: -LASERSCHNEIDOPF WITH 5 "LENS -LASERSCHNEIDOPF WITH 7.5 "LENS -UNIVERSAL QUICK EXCHANGE DEVICE -CONTROLLINE CONTROL: -CONTROL SIEMENS SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -CONTOURLINE -SPRINTLINE -TELESERVICE -MICROWELD -RJ45 NETWORK CONNECTOR -3.5 "FLOPPY DISK DRIVE -NETWORK CONNECTION VIA TELE-DIAGNOSIS SECURITY: -CE MARKING -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -SHOP FLOOR PROGRAMMING (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-1,0 qm, electric, moveable, include \r\n4 decks (with steam) 600 x 400 mm,\r\nproofer for 6 plates 600 x 400 mm\r\nsteam condenser\r\ncondition as it is - cpl. assembled loaded 1,0 QM, ELECTRIC, MOVEABLE, INCLUDE \R\N4 DECKS (WITH STEAM) 600 X 400 MM,\R\NPROOFER FOR 6 PLATES 600 X 400 MM\R\NSTEAM CONDENSER\R\NCONDITION AS IT IS - CPL. ASSEMBLED LOADED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 3.200 €
Ubicación: Land-code: 0574
brand: minimax scm
model: ls 3000 - ce standard 

belt sanding machine  with double goose neck - with 3 motors - with suction bag - ce standard

table  length  mm 3000
table width  mm  1100
automatic table  lifting    stroke  mm 580 
2-speeds belt motor
suction motor
sanding belt  lenght mm 8100
pulleys diameter mm  250 
overall dimensions:  mm 4150 x 1500 x 1600 h
weight  kg 485



 CODE: 0574 BRAND: MINIMAX SCM MODEL: LS 3000 - CE STANDARD BELT SANDING MACHINE WITH DOUBLE GOOSE NECK - WITH 3 MOTORS - WITH SUCTION BAG - CE STANDARD TABLE LENGTH MM 3000 TABLE WIDTH MM 1100 AUTOMATIC TABLE LIFTING STROKE MM 580 2-SPEEDS BELT MOTOR SUCTION MOTOR SANDING BELT LENGHT MM 8100 PULLEYS DIAMETER MM 250 OVERALL DIMENSIONS: MM 4150 X 1500 X 1600 H WEIGHT KG 485
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-stainless steel, incl. proofer+ suction fan, \r\nbaking chamber:        5 pans   600  x  400 mm\r\nproofing cabinet:      16 pans   600  x  400 mm\r\n STAINLESS STEEL, INCL. PROOFER+ SUCTION FAN, \R\NBAKING CHAMBER: 5 PANS 600 X 400 MM\R\NPROOFING CABINET: 16 PANS 600 X 400 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-cutting capacity: (90â° links) 4 mm st 40, 3 mm stainless steel
cutting length 150 x 150 mm
cutting angle 30-120 â°
electr. power 5 kva
length 1250 mm
width: 1000 mm
height 1160 mm
table 1000x650mm CUTTING CAPACITY: (90&ACIRC;&DEG; LINKS) 4 MM ST 40, 3 MM STAINLESS STEEL CUTTING LENGTH 150 X 150 MM CUTTING ANGLE 30-120 &ACIRC;&DEG; ELECTR. POWER 5 KVA LENGTH 1250 MM WIDTH: 1000 MM HEIGHT 1160 MM TABLE 1000X650MM
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-aluminium caps ranging from<br/>diameters of 18 [mm] to 38 [mm] <br/>id5483 ALUMINIUM CAPS RANGING FROM
DIAMETERS OF 18 [MM] TO 38 [MM]
ID5483
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-profile milling and profile grinding machine brandt - arminius, specifically for stair construction

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

ideal machine for stair builders and solid wood processor
5 units:
1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe
2 milling units 1, 5kw to radius milling, swiveling
2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe

secure workpiece clamping chain plates and upper pressure roller
workpiece thickness up to approx. 60 mm
adjustable feed speed
easy pull-out workpiece support
machine is currently equipped with milling cutters r8

operating instructions
ce mark
after painted in places
great machine with outstanding sanding results, hardly rework required. ideal for the efficient production of stairs or table tops.

dimensions approx. 4000 x 1300 x 1900mm (lxwxh). weight approx. 1200kg. 

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". PROFILE MILLING AND PROFILE GRINDING MACHINE BRANDT - ARMINIUS, SPECIFICALLY FOR STAIR CONSTRUCTION THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. IDEAL MACHINE FOR STAIR BUILDERS AND SOLID WOOD PROCESSOR 5 UNITS: 1 EDGE GRINDING UNIT WITH 120 MM BAND, PNEUMATIC BELT TENSION AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE 2 MILLING UNITS 1, 5KW TO RADIUS MILLING, SWIVELING 2 UNITS OF PROFILE GRINDING WITH BELT AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE SECURE WORKPIECE CLAMPING CHAIN PLATES AND UPPER PRESSURE ROLLER WORKPIECE THICKNESS UP TO APPROX. 60 MM ADJUSTABLE FEED SPEED EASY PULL-OUT WORKPIECE SUPPORT MACHINE IS CURRENTLY EQUIPPED WITH MILLING CUTTERS R8 OPERATING INSTRUCTIONS CE MARK AFTER PAINTED IN PLACES GREAT MACHINE WITH OUTSTANDING SANDING RESULTS, HARDLY REWORK REQUIRED. IDEAL FOR THE EFFICIENT PRODUCTION OF STAIRS OR TABLE TOPS. DIMENSIONS APPROX. 4000 X 1300 X 1900MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 27.000 EU€
Ubicación: Land-the machine is a special four-roller winder, intended for folding sheets al m. al. reflector. it has 3 independent lower rollers shortening the time to a minimum roll. the rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. compensation of sagging upper roller is realized by longitudinal beam. all rollers are driven. the spinning process is carried out without slip to prevent scratching of the workpiece. cnc - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. all rolls are chrome-plated and polished. all axes are programmable. the machine has the possibility of rolling difficult elliptical shapes. THE MACHINE IS A SPECIAL FOUR-ROLLER WINDER, INTENDED FOR FOLDING SHEETS AL M. AL. REFLECTOR. IT HAS 3 INDEPENDENT LOWER ROLLERS SHORTENING THE TIME TO A MINIMUM ROLL. THE ROLLERS ARE SUPPORTED BY ADJUSTABLE, BEARINGS SLIDES FOR EASY COMPENSATION OF THE DEFLECTION DEPENDING ON THE THICKNESS AND HARDNESS OF THE MATERIAL. COMPENSATION OF SAGGING UPPER ROLLER IS REALIZED BY LONGITUDINAL BEAM. ALL ROLLERS ARE DRIVEN. THE SPINNING PROCESS IS CARRIED OUT WITHOUT SLIP TO PREVENT SCRATCHING OF THE WORKPIECE. CNC - EQUIPPED WITH AN INTERPOLATION, IT IS A SIMULTANEOUS ROTATION BENDING ROLLS, ALONG WITH THEIR SHIFT. ALL ROLLS ARE CHROME-PLATED AND POLISHED. ALL AXES ARE PROGRAMMABLE. THE MACHINE HAS THE POSSIBILITY OF ROLLING DIFFICULT ELLIPTICAL SHAPES.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-control fanuc o-tc, feeder fmb minimag 3 m.
maximum rotating diameter. 12.7 mm
max speed 12000 rpm.
longitudinal stroke z 1 160 mm
rapid traverse 30 m / min.
maximum thrust force 125 dan
radial stroke x 1 85 mm
weight approx. 2 t
tool holder schlitten1: fixed tool holder 5
accessories: coolant system. CONTROL FANUC O-TC, FEEDER FMB MINIMAG 3 M. MAXIMUM ROTATING DIAMETER. 12.7 MM MAX SPEED 12000 RPM. LONGITUDINAL STROKE Z 1 160 MM RAPID TRAVERSE 30 M / MIN. MAXIMUM THRUST FORCE 125 DAN RADIAL STROKE X 1 85 MM WEIGHT APPROX. 2 T TOOL HOLDER SCHLITTEN1: FIXED TOOL HOLDER 5 ACCESSORIES: COOLANT SYSTEM.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-number of milling spindles: 1 st.<br/>fence: ja ja /nein<br/>workpiece: ja <br/>crosscutting milling machine stegherr, type ksf-mini<br/><br/><br/>special milling machine for the efficient production of crossbar joints.<br/><br/>the cross-grain milling machine ksf-mini is the product of great experience of <br/>the company<br/>stegherr in the construction of this special milling machine for cross-rung <br/>joints.<br/><br/>with the ksf-mini all can be found in practice<br/>cross joint connections<br/>be produced quickly and accurately. also already profiled sprouts<br/>can be<br/>on the ksf-mini edit. the precise milling is achieved because the<br/>workpiece in<br/>a clamping is handled on three sides.<br/><br/>the tool drive takes place via two three-phase motors, the tension of<br/>workpieces pneumatic.<br/><br/>the profile cutter is designed for the web width. the saw blades, which are the<br/>flatten out,<br/>are adjustable by intermediate rings to the dimensions of the profile cutter.<br/><br/>the swivel device is free of play.<br/><br/>the machine is designed for a maximum workpiece cross section of 56 x 46<br/>mm.<br/><br/>motor 2.2 kw, 380 v 50 hz<br/><br/>pneumatic pressure 6 bar<br/><br/>included:<br/><br/>- footswitch operation<br/>- table base<br/>- ruler<br/>- 2 saw blades<br/>- 1 profile cutter<br/><br/>(technical data according to the manufacturer, without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF MILLING SPINDLES: 1 ST.
FENCE: JA JA /NEIN
WORKPIECE: JA
CROSSCUTTING MILLING MACHINE STEGHERR, TYPE KSF-MINI


SPECIAL MILLING MACHINE FOR THE EFFICIENT PRODUCTION OF CROSSBAR JOINTS.

THE CROSS-GRAIN MILLING MACHINE KSF-MINI IS THE PRODUCT OF GREAT EXPERIENCE OF
THE COMPANY
STEGHERR IN THE CONSTRUCTION OF THIS SPECIAL MILLING MACHINE FOR CROSS-RUNG
JOINTS.

WITH THE KSF-MINI ALL CAN BE FOUND IN PRACTICE
CROSS JOINT CONNECTIONS
BE PRODUCED QUICKLY AND ACCURATELY. ALSO ALREADY PROFILED SPROUTS
CAN BE
ON THE KSF-MINI EDIT. THE PRECISE MILLING IS ACHIEVED BECAUSE THE
WORKPIECE IN
A CLAMPING IS HANDLED ON THREE SIDES.

THE TOOL DRIVE TAKES PLACE VIA TWO THREE-PHASE MOTORS, THE TENSION OF
WORKPIECES PNEUMATIC.

THE PROFILE CUTTER IS DESIGNED FOR THE WEB WIDTH. THE SAW BLADES, WHICH ARE THE
FLATTEN OUT,
ARE ADJUSTABLE BY INTERMEDIATE RINGS TO THE DIMENSIONS OF THE PROFILE CUTTER.

THE SWIVEL DEVICE IS FREE OF PLAY.

THE MACHINE IS DESIGNED FOR A MAXIMUM WORKPIECE CROSS SECTION OF 56 X 46
MM.

MOTOR 2.2 KW, 380 V 50 HZ

PNEUMATIC PRESSURE 6 BAR

INCLUDED:

- FOOTSWITCH OPERATION
- TABLE BASE
- RULER
- 2 SAW BLADES
- 1 PROFILE CUTTER

(TECHNICAL DATA ACCORDING TO THE MANUFACTURER, WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-1998
mitsubishi cnc control meldas
number of spindles: 2
main spindle
max. bar diameter: 32 mm
speed: 200 - 8000 r / min
power: 5.5 kw
z1 stroke: 250 mm
c axis
counter
max. bar diameter: 25 mm
speed: 200 - 6000 r / min
power: 2.2 kw
racing z2: 120 mm
number of fixed tools: 5
number of driven tools: 4
speed ??of driven tools: 200 - 5000 r / min
the driven tools power: 0.4 kw
number of fixed positions: 3
number of fixed positions: 5
supply voltage: 400 v / 50 hz
power: 11 kw
bushing guide
collect pieces
lubrication container with pump
chip conveyor
caricabarre lns hydrobar minisprint
bar length: 3200 mm 1998 MITSUBISHI CNC CONTROL MELDAS NUMBER OF SPINDLES: 2 MAIN SPINDLE MAX. BAR DIAMETER: 32 MM SPEED: 200 - 8000 R / MIN POWER: 5.5 KW Z1 STROKE: 250 MM C AXIS COUNTER MAX. BAR DIAMETER: 25 MM SPEED: 200 - 6000 R / MIN POWER: 2.2 KW RACING Z2: 120 MM NUMBER OF FIXED TOOLS: 5 NUMBER OF DRIVEN TOOLS: 4 SPEED ??OF DRIVEN TOOLS: 200 - 5000 R / MIN THE DRIVEN TOOLS POWER: 0.4 KW NUMBER OF FIXED POSITIONS: 3 NUMBER OF FIXED POSITIONS: 5 SUPPLY VOLTAGE: 400 V / 50 HZ POWER: 11 KW BUSHING GUIDE COLLECT PIECES LUBRICATION CONTAINER WITH PUMP CHIP CONVEYOR CARICABARRE LNS HYDROBAR MINISPRINT BAR LENGTH: 3200 MM
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 750 x 400 x 280 mm<br/>description: protective screens for spindle moulder axis<br> maximum working diameter 160 mm<br> minimum working radius 200 mm<br> maximum elevation of the screen 120 mm<br> diameter of the outlet hole 110 mm<br> ce standards WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 400 X 280 MM
DESCRIPTION: PROTECTIVE SCREENS FOR SPINDLE MOULDER AXIS
MAXIMUM WORKING DIAMETER 160 MM
MINIMUM WORKING RADIUS 200 MM
MAXIMUM ELEVATION OF THE SCREEN 120 MM
DIAMETER OF THE OUTLET HOLE 110 MM
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-5 linear axes 
2 linear axes 
2 axles c
bar loader iemca miniboss 325
year 2001
work oil
cnc fanuc
fixed rear machining 
passage headstock bar 20 mm 5 LINEAR AXES 2 LINEAR AXES 2 AXLES C BAR LOADER IEMCA MINIBOSS 325 YEAR 2001 WORK OIL CNC FANUC FIXED REAR MACHINING PASSAGE HEADSTOCK BAR 20 MM
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 980 kg<br/>dimensions (l x w x h) approx.: 3400 x 1900 x 2000 mm<br/>description: door rotator machine<br> number of working arms: 16 pcs<br> length of arms 800 mm<br> minimum piece length 570 mm<br> maximum door thickness 115 mm<br> electric rotator<br> motor power 2.2 kw<br> includes feeding and exit tables<br> WEIGHT APPROX.: 980 KG
DIMENSIONS (L X W X H) APPROX.: 3400 X 1900 X 2000 MM
DESCRIPTION: DOOR ROTATOR MACHINE
NUMBER OF WORKING ARMS: 16 PCS
LENGTH OF ARMS 800 MM
MINIMUM PIECE LENGTH 570 MM
MAXIMUM DOOR THICKNESS 115 MM
ELECTRIC ROTATOR
MOTOR POWER 2.2 KW
INCLUDES FEEDING AND EXIT TABLES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-round cutting capacity mm 420
capacity square cut mm 420 x 420
working height 900 mm
development blade mm 6050 x 41 x 1.3
help synchronous blade in the vise
 flywheels diameter 720 mm
clamping width mm 10/420
single roundup advancement 680 mm
cutting speed 12 to 50 m / min or 24 to 100 m / min
machine weight 3600 kg
minimal lubrication system included
year built 2/94 ROUND CUTTING CAPACITY MM 420 CAPACITY SQUARE CUT MM 420 X 420 WORKING HEIGHT 900 MM DEVELOPMENT BLADE MM 6050 X 41 X 1.3 HELP SYNCHRONOUS BLADE IN THE VISE FLYWHEELS DIAMETER 720 MM CLAMPING WIDTH MM 10/420 SINGLE ROUNDUP ADVANCEMENT 680 MM CUTTING SPEED 12 TO 50 M / MIN OR 24 TO 100 M / MIN MACHINE WEIGHT 3600 KG MINIMAL LUBRICATION SYSTEM INCLUDED YEAR BUILT 2/94
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 3900 x 2200 x 2100 mm<br/>description: 5 axis cnc pade unimini<br> serial number 9951<br> total axis: 5<br> travel axis-x: 2030 mm<br> travel axis-y: 490 mm<br> vertical travel: 750 mm<br> motor power 5,5 kw - 500/18.000 rpm<br> possibility of drilling, milling grooves, round spikes, cutting, milling contours, milling edges of seats, etc.<br> it has control command<br> ce standards<br> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 3900 X 2200 X 2100 MM
DESCRIPTION: 5 AXIS CNC PADE UNIMINI
SERIAL NUMBER 9951
TOTAL AXIS: 5
TRAVEL AXIS-X: 2030 MM
TRAVEL AXIS-Y: 490 MM
VERTICAL TRAVEL: 750 MM
MOTOR POWER 5,5 KW - 500/18.000 RPM
POSSIBILITY OF DRILLING, MILLING GROOVES, ROUND SPIKES, CUTTING, MILLING CONTOURS, MILLING EDGES OF SEATS, ETC.
IT HAS CONTROL COMMAND
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-3d pipe laser mazak fabri gear 400 ii

the used 3d pipe laser mazak fabri gear 400 ii is in a technically and optically flawless condition and can still be seen under power. 15 m long pipes and profiles can be edited to a shell diameter of 400 mm.

the pipe laser 3d fabri gear 400 mkii is 4kw as new and in top condition with low hours.

facilities:

15m loading and unloading for processing of up to 15 m long profiles/tubes
    tapping unit with 6 thread stops up to m10
    4kw resonator to wall thickness 20 mm fe at 90 â°
    3d cutting head for the processing of tubes / profiles / free form part
    tactile sensor for material scanning
    clamping of the material on both sides of the cutting head for unbeatable precision
    automatic pipe measurement
    automatic profile centering
    non-contact height scanning
    work piece clamping jaws
    documentation
    7.5 'cutting head (non-contact height scanning)
    super high pressure gas pipeline

cutting performance 90â°:

fe up to 20mm
    va up to 10mm
    aluminium up to 8mm

the machine comes with warranty, commissioning + training, software + training offered.
 3D PIPE LASER MAZAK FABRI GEAR 400 II THE USED 3D PIPE LASER MAZAK FABRI GEAR 400 II IS IN A TECHNICALLY AND OPTICALLY FLAWLESS CONDITION AND CAN STILL BE SEEN UNDER POWER. 15 M LONG PIPES AND PROFILES CAN BE EDITED TO A SHELL DIAMETER OF 400 MM. THE PIPE LASER 3D FABRI GEAR 400 MKII IS 4KW AS NEW AND IN TOP CONDITION WITH LOW HOURS. FACILITIES: 15M LOADING AND UNLOADING FOR PROCESSING OF UP TO 15 M LONG PROFILES/TUBES TAPPING UNIT WITH 6 THREAD STOPS UP TO M10 4KW RESONATOR TO WALL THICKNESS 20 MM FE AT 90 &ACIRC;&DEG; 3D CUTTING HEAD FOR THE PROCESSING OF TUBES / PROFILES / FREE FORM PART TACTILE SENSOR FOR MATERIAL SCANNING CLAMPING OF THE MATERIAL ON BOTH SIDES OF THE CUTTING HEAD FOR UNBEATABLE PRECISION AUTOMATIC PIPE MEASUREMENT AUTOMATIC PROFILE CENTERING NON-CONTACT HEIGHT SCANNING WORK PIECE CLAMPING JAWS DOCUMENTATION 7.5 'CUTTING HEAD (NON-CONTACT HEIGHT SCANNING) SUPER HIGH PRESSURE GAS PIPELINE CUTTING PERFORMANCE 90&ACIRC;&DEG;: FE UP TO 20MM VA UP TO 10MM ALUMINIUM UP TO 8MM THE MACHINE COMES WITH WARRANTY, COMMISSIONING + TRAINING, SOFTWARE + TRAINING OFFERED.
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 35 kg<br/>dimensions (l x w x h) approx.: 600 x 950 x 430 mm<br/>description: virutex manual edgebander<br> serial number 2727<br> for preguled edges<br> minimum working thickness 7 mm<br> maximum working thickness 65 mm<br> electronic temperature regulation : 0-500 °c<br> input power 2850 w<br> ce standards WEIGHT APPROX.: 35 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 950 X 430 MM
DESCRIPTION: VIRUTEX MANUAL EDGEBANDER
SERIAL NUMBER 2727
FOR PREGULED EDGES
MINIMUM WORKING THICKNESS 7 MM
MAXIMUM WORKING THICKNESS 65 MM
ELECTRONIC TEMPERATURE REGULATION : 0-500 °C
INPUT POWER 2850 W
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,000 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,000 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 900 kg<br/>dimensions (l x w x h) approx.: 7500 x 1200 x 1500 mm<br/>description: bercar programmable cutting-off machine<br> serial number 07055<br> automatic feeding system for cutting pieces<br> cut from 45 ° - 90 ° - 135 °<br> feeding transfer length 4000 mm<br> minimum cutting length (at 90°): 1 mm<br> maximum cutting width 250 mm<br> maximum cutting height 100 mm<br> output transfer length of 2500 mm, with lateral pusher<br> cutting motor power of the 5.5 hp<br> total installed power 7.5 hp<br> pneumatic pressure: 7 kg<br> gradual adjustment of the cutting head<br> subjection on both sides<br> programming console with keyboard for introduction and modification of measurements<br> ce standards WEIGHT APPROX.: 900 KG
DIMENSIONS (L X W X H) APPROX.: 7500 X 1200 X 1500 MM
DESCRIPTION: BERCAR PROGRAMMABLE CUTTING-OFF MACHINE
SERIAL NUMBER 07055
AUTOMATIC FEEDING SYSTEM FOR CUTTING PIECES
CUT FROM 45 ° - 90 ° - 135 °
FEEDING TRANSFER LENGTH 4000 MM
MINIMUM CUTTING LENGTH (AT 90°): 1 MM
MAXIMUM CUTTING WIDTH 250 MM
MAXIMUM CUTTING HEIGHT 100 MM
OUTPUT TRANSFER LENGTH OF 2500 MM, WITH LATERAL PUSHER
CUTTING MOTOR POWER OF THE 5.5 HP
TOTAL INSTALLED POWER 7.5 HP
PNEUMATIC PRESSURE: 7 KG
GRADUAL ADJUSTMENT OF THE CUTTING HEAD
SUBJECTION ON BOTH SIDES
PROGRAMMING CONSOLE WITH KEYBOARD FOR INTRODUCTION AND MODIFICATION OF MEASUREMENTS
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,420 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,420 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: used machinery auction RESALE 800 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 2900 x 900 x 1300 mm<br/>description: casadei pre-glued unilateral edgebander<br> serial number 99 115 112<br> maximum working height 60 mm<br> minimum working width 90 mm<br> upper and lower trimming group<br> speed ??variator<br> engine power 0,15 kw-870 rpm<br> total installed power 3,5 kw<br> transport belt from feeding group is missing<br> ce standards WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 2900 X 900 X 1300 MM
DESCRIPTION: CASADEI PRE-GLUED UNILATERAL EDGEBANDER
SERIAL NUMBER 99 115 112
MAXIMUM WORKING HEIGHT 60 MM
MINIMUM WORKING WIDTH 90 MM
UPPER AND LOWER TRIMMING GROUP
SPEED ??VARIATOR
ENGINE POWER 0,15 KW-870 RPM
TOTAL INSTALLED POWER 3,5 KW
TRANSPORT BELT FROM FEEDING GROUP IS MISSING
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gebr. aluminium circular saw make mountain schmidmodell velox. no.: 62219 built 1986sã¤geblatt-ã?350 mmgehrungsschnitt re.   li. vert 45 â°. swivel gear head for schrã¤gschnitt45 â° linksschnitt - ã?: 90 â° rund130 mm45 â° rund120 from mm45 â° gear head at 45 â° stellung105 mm90 â° flach200 x 80 mm45 â° flach130 x 80 mmsã¤geblattdrehzahl1400/2800 upmmotor380 v1, 5 / 1.8 kwauã?enmaã?e: breite800 mmtiefe900 mmhã¶he1500 mmgewicht ca. 213 kgmit: doppelspanneinrichtungrollbahnen total length 3800 mm  GEBR. ALUMINIUM CIRCULAR SAW MAKE MOUNTAIN SCHMIDMODELL VELOX. NO.: 62219 BUILT 1986S&ATILDE;&CURREN;GEBLATT-&ATILDE;?350 MMGEHRUNGSSCHNITT RE. LI. VERT 45 &ACIRC;&DEG;. SWIVEL GEAR HEAD FOR SCHR&ATILDE;&CURREN;GSCHNITT45 &ACIRC;&DEG; LINKSSCHNITT - &ATILDE;?: 90 &ACIRC;&DEG; RUND130 MM45 &ACIRC;&DEG; RUND120 FROM MM45 &ACIRC;&DEG; GEAR HEAD AT 45 &ACIRC;&DEG; STELLUNG105 MM90 &ACIRC;&DEG; FLACH200 X 80 MM45 &ACIRC;&DEG; FLACH130 X 80 MMS&ATILDE;&CURREN;GEBLATTDREHZAHL1400/2800 UPMMOTOR380 V1, 5 / 1.8 KWAU&ATILDE;?ENMA&ATILDE;?E: BREITE800 MMTIEFE900 MMH&ATILDE;&PARA;HE1500 MMGEWICHT CA. 213 KGMIT: DOPPELSPANNEINRICHTUNGROLLBAHNEN TOTAL LENGTH 3800 MM
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 6000 x 1700 x 1200 mm<br/>description: cpc automatic press for doors, doors automatic clamp<br> serial number 200.124<br> total installed power 2 kw<br> maximum workpiece dimensions approx. 2500 x 750 x 50 mm<br> minimum workpiece dimensions approx. 300 x 135 x 15 mm<br> production capacity up to 3 frames per minute<br> feed speed 21 m/min<br> working height from the floor 850 mm<br> the machine automatically adjust to the workpiece dimensions<br> adjustable pressing time WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 1700 X 1200 MM
DESCRIPTION: CPC AUTOMATIC PRESS FOR DOORS, DOORS AUTOMATIC CLAMP
SERIAL NUMBER 200.124
TOTAL INSTALLED POWER 2 KW
MAXIMUM WORKPIECE DIMENSIONS APPROX. 2500 X 750 X 50 MM
MINIMUM WORKPIECE DIMENSIONS APPROX. 300 X 135 X 15 MM
PRODUCTION CAPACITY UP TO 3 FRAMES PER MINUTE
FEED SPEED 21 M/MIN
WORKING HEIGHT FROM THE FLOOR 850 MM
THE MACHINE AUTOMATICALLY ADJUST TO THE WORKPIECE DIMENSIONS
ADJUSTABLE PRESSING TIME
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english.   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 1800 kg<br/>dimensions (l x w x h) approx.: 2300 x 1400 x 1500 mm<br/>description: cml j 350 multi blade saw<br> serial number 3703<br> maximum cutting width 350 mm<br> maximum cutting height 120 mm<br> minimum diameter of the saws 250 mm<br> maximum diameter of the saws 350 mm<br> total installed power 33 kw<br> electronic chain speed ??variator<br> automatic rising and lowering of the feeding chain<br> ce standards WEIGHT APPROX.: 1800 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 1400 X 1500 MM
DESCRIPTION: CML J 350 MULTI BLADE SAW
SERIAL NUMBER 3703
MAXIMUM CUTTING WIDTH 350 MM
MAXIMUM CUTTING HEIGHT 120 MM
MINIMUM DIAMETER OF THE SAWS 250 MM
MAXIMUM DIAMETER OF THE SAWS 350 MM
TOTAL INSTALLED POWER 33 KW
ELECTRONIC CHAIN SPEED ??VARIATOR
AUTOMATIC RISING AND LOWERING OF THE FEEDING CHAIN
CE STANDARDS
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)