8 ofertas

Año de construcción: usado
Ubicación: Land-
make your serious offer if you are in need of any of the followings.

 

1 x brueckner stenter, 1998
suitable for knitted and woven fabric

      type: hn 34 / 8

      working width: 3400mm

      no of compartments: 8

      chain: pin clip

      heating system: circulating oil

      padder: kuesters type 222.17

      weftstraightener: mahlo, 6 sensors

      entry: j - box

      exit: large batch - roll batcher
      thermo oil boiler included
 

1 x benninger mercerising installation, 1992 completely refurbished 2014

type: ms1 - s - 1e - extracta

working width: 1800mm

configuration:

     cloth feeding device

     wetting trough

     squeezing mangle

     intensiv impregnating compartment

     squeezing mangle

     cooling compartment

     stenter section

     squeezing mangle

     stabilizing compartment

     squeezing mangle

     washing coompartment

     squeezing mangle

     batching device
 

1 x stork rotary printer rd 4, 1985

12 colour

repeats: 640 mm, 820 mm, 914 mm, 1010 mm

working width: printer – 2800mm,

working width: dryer – 2350mm,

loop system dryer,

steam heated

entry for knit and woven goods

exit: plaiting

 MAKE YOUR SERIOUS OFFER IF YOU ARE IN NEED OF ANY OF THE FOLLOWINGS. 1 X BRUECKNER STENTER, 1998 SUITABLE FOR KNITTED AND WOVEN FABRIC TYPE: HN 34 / 8 WORKING WIDTH: 3400MM NO OF COMPARTMENTS: 8 CHAIN: PIN CLIP HEATING SYSTEM: CIRCULATING OIL PADDER: KUESTERS TYPE 222.17 WEFTSTRAIGHTENER: MAHLO, 6 SENSORS ENTRY: J - BOX EXIT: LARGE BATCH - ROLL BATCHER THERMO OIL BOILER INCLUDED 1 X BENNINGER MERCERISING INSTALLATION, 1992 COMPLETELY REFURBISHED 2014 TYPE: MS1 - S - 1E - EXTRACTA WORKING WIDTH: 1800MM CONFIGURATION: CLOTH FEEDING DEVICE WETTING TROUGH SQUEEZING MANGLE INTENSIV IMPREGNATING COMPARTMENT SQUEEZING MANGLE COOLING COMPARTMENT STENTER SECTION SQUEEZING MANGLE STABILIZING COMPARTMENT SQUEEZING MANGLE WASHING COOMPARTMENT SQUEEZING MANGLE BATCHING DEVICE 1 X STORK ROTARY PRINTER RD 4, 1985 12 COLOUR REPEATS: 640 MM, 820 MM, 914 MM, 1010 MM WORKING WIDTH: PRINTER – 2800MM, WORKING WIDTH: DRYER – 2350MM, LOOP SYSTEM DRYER, STEAM HEATED ENTRY FOR KNIT AND WOVEN GOODS EXIT: PLAITING
Vendedor: American Traders
Año de construcción: usado
Ubicación: Land-rame bruckner for tissue to the flat, wide cylinders 2.000 mm. year 1999

entry with supercharging and box of vaporized
horizontal chain of forceps and needles (only installed clamps)
12 fields heated gas burners eclipse
exit j mollusk, inspection table with reels 2 car boot
kiln length: 3 x 12 = 36 m

the machine will be delivered without cloth or weft straightener RAME BRUCKNER FOR TISSUE TO THE FLAT, WIDE CYLINDERS 2.000 MM. YEAR 1999 ENTRY WITH SUPERCHARGING AND BOX OF VAPORIZED HORIZONTAL CHAIN OF FORCEPS AND NEEDLES (ONLY INSTALLED CLAMPS) 12 FIELDS HEATED GAS BURNERS ECLIPSE EXIT J MOLLUSK, INSPECTION TABLE WITH REELS 2 CAR BOOT KILN LENGTH: 3 X 12 = 36 M THE MACHINE WILL BE DELIVERED WITHOUT CLOTH OR WEFT STRAIGHTENER
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-; very good condition ; VERY GOOD CONDITION
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-; very good condition ; VERY GOOD CONDITION
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand bopp line 
mfc.:	brückner 		type: 	3 layer bopp line 		built:  	1986 
major renovations made in 1994 to increase the line speed /output.
max. output:	600 kg/h	capacity:	4800 t/annum
final film width: 4800 mm	divided to 3 separate winders with working width of 2200 mm
film thickness range: 	20 - 35 microns 	produced films type: 	transparent films 
 QTY. 1 SECOND-HAND BOPP LINE MFC.: BRüCKNER TYPE: 3 LAYER BOPP LINE BUILT: 1986 MAJOR RENOVATIONS MADE IN 1994 TO INCREASE THE LINE SPEED /OUTPUT. MAX. OUTPUT: 600 KG/H CAPACITY: 4800 T/ANNUM FINAL FILM WIDTH: 4800 MM DIVIDED TO 3 SEPARATE WINDERS WITH WORKING WIDTH OF 2200 MM FILM THICKNESS RANGE: 20 - 35 MICRONS PRODUCED FILMS TYPE: TRANSPARENT FILMS
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-bopp plant  x2 (biaxially oriented polypropylene film production lines)

(1st plant)

make:bruckner(germany)

manufacturing year:1989

capacity: 13,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-50 micron

film width(trimmed);6500mm

mechanical and thermal layout:

thickness 12 micron / speed 220m/min / output 927kg/h

thickness 20 micron / speed 200m/min / output 1404kg/h

thickness 25 micron / speed 170m/min / output 1492kg/h

thickness 30 micron / speed 165m/min / output 1737kg/h

thickness 40 micron / speed 110m/min / output 1544kg/h

thickness 50 micron / speed 85m/min / output 1492kg/h

stretch ratio:machine direction 1:1~ 1:6

transverse direction: 1:6~1:10

speed:max.300m/min

production speed: 220m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 2400kg/h)

b.dosinf for satellite extruder: 2sets)(150kg/h, 150kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm, 21 d, 880kw dc motor

-melting extruder:dia.225mm, 20d. 338kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.75mm,30d,59kw dc motor, max.output 100kg/h

c.polymer filter for main extruder

-type:long life filter , 19 candles

-filter area: approx. 1.4m2

-heating:thermal oil heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:43ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-ddia.2000mm width 1200mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:650-800mm

-max.stretching width:7500mm

-outlet width:6000-6900mm

-preheating zone: 3 m x 5zone 

-stretching zone; 3 m x4zone

-annealing zone: 3m x 4zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 125 kw dc motor

    

5.thickness gauge: kamma ray 

6.winder

-automatic turret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1000mm

7.slitter

make:atlas

max. speed: 600m/min

max. working width: 6600mm

max. diameter of mill roll on unwinder:1000mm

number of rewinder station;12

rewinding width: 300-3000mm

  
  (2nd plant)  

make:mitsubishi(japan)

manufacturing year:1993

capacity: 14,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-60 micron

film width(trimmed);6300mm

mechanical and thermal layout:

thickness 12 micron / speed 240m/min / output 980kg/h

thickness 20 micron / speed 220m/min / output 1497kg/h

thickness 25 micron / speed 195m/min / output 1658kg/h

thickness 30 micron / speed 180m/min / output 1837kg/h

thickness 40 micron / speed 120m/min / output 1633kg/h

thickness 50 micron / speed 90m/min / output 1531kg/h

stretch ratio:machine direction 1:1~ 1:10

transverse direction: 1:7~1:10

speed:max.320m/min

production speed: 240m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 4000kg/h)

b.dosinf for satellite extruder: 2sets)800kg/h, 500kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm,700kw dc motor

-melting extruder:dia.220mm,350kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.115mm,160kw dc motor, max.output 300kg/h

-dia.90mm,90kw dc motor, max.output 200kg/h

c.polymer filter for main extruder

-type:multi disc type filter, 12 pieces

-filter area: approx. 2m2

-heating:electric heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:29ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-dia.1000mm 1ea, dia.2000mm x2ea, width 1300mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:600-1000mm

-max.stretching width:7446mm

-outlet width:6000-6700mm

-preheating zone: 3 m x 4zone / 4.5m x 2zones

-stretching zone; 3 m x5zone

-annealing zone: 1m x 1zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 132 kw ac motor

   

5.thickness gauge: kamma ray 

6.winder

-automatic yurret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1200mm

7.slitter

make:kampf(germany)

max. speed: 1000m/min

max. working width: 6500mm

max. diameter of mill roll on unwinder:1200mm

number of rewinder station;14

rewinding width: 300-3000mm
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


  
  BOPP PLANT X2 (BIAXIALLY ORIENTED POLYPROPYLENE FILM PRODUCTION LINES) (1ST PLANT) MAKE:BRUCKNER(GERMANY) MANUFACTURING YEAR:1989 CAPACITY: 13,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-50 MICRON FILM WIDTH(TRIMMED);6500MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 220M/MIN / OUTPUT 927KG/H THICKNESS 20 MICRON / SPEED 200M/MIN / OUTPUT 1404KG/H THICKNESS 25 MICRON / SPEED 170M/MIN / OUTPUT 1492KG/H THICKNESS 30 MICRON / SPEED 165M/MIN / OUTPUT 1737KG/H THICKNESS 40 MICRON / SPEED 110M/MIN / OUTPUT 1544KG/H THICKNESS 50 MICRON / SPEED 85M/MIN / OUTPUT 1492KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:6 TRANSVERSE DIRECTION: 1:6~1:10 SPEED:MAX.300M/MIN PRODUCTION SPEED: 220M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 2400KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)(150KG/H, 150KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM, 21 D, 880KW DC MOTOR -MELTING EXTRUDER:DIA.225MM, 20D. 338KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.75MM,30D,59KW DC MOTOR, MAX.OUTPUT 100KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:LONG LIFE FILTER , 19 CANDLES -FILTER AREA: APPROX. 1.4M2 -HEATING:THERMAL OIL HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:43EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DDIA.2000MM WIDTH 1200MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:650-800MM -MAX.STRETCHING WIDTH:7500MM -OUTLET WIDTH:6000-6900MM -PREHEATING ZONE: 3 M X 5ZONE -STRETCHING ZONE; 3 M X4ZONE -ANNEALING ZONE: 3M X 4ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 125 KW DC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC TURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1000MM 7.SLITTER MAKE:ATLAS MAX. SPEED: 600M/MIN MAX. WORKING WIDTH: 6600MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1000MM NUMBER OF REWINDER STATION;12 REWINDING WIDTH: 300-3000MM (2ND PLANT) MAKE:MITSUBISHI(JAPAN) MANUFACTURING YEAR:1993 CAPACITY: 14,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-60 MICRON FILM WIDTH(TRIMMED);6300MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 240M/MIN / OUTPUT 980KG/H THICKNESS 20 MICRON / SPEED 220M/MIN / OUTPUT 1497KG/H THICKNESS 25 MICRON / SPEED 195M/MIN / OUTPUT 1658KG/H THICKNESS 30 MICRON / SPEED 180M/MIN / OUTPUT 1837KG/H THICKNESS 40 MICRON / SPEED 120M/MIN / OUTPUT 1633KG/H THICKNESS 50 MICRON / SPEED 90M/MIN / OUTPUT 1531KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:10 TRANSVERSE DIRECTION: 1:7~1:10 SPEED:MAX.320M/MIN PRODUCTION SPEED: 240M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 4000KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)800KG/H, 500KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM,700KW DC MOTOR -MELTING EXTRUDER:DIA.220MM,350KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.115MM,160KW DC MOTOR, MAX.OUTPUT 300KG/H -DIA.90MM,90KW DC MOTOR, MAX.OUTPUT 200KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:MULTI DISC TYPE FILTER, 12 PIECES -FILTER AREA: APPROX. 2M2 -HEATING:ELECTRIC HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:29EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DIA.1000MM 1EA, DIA.2000MM X2EA, WIDTH 1300MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:600-1000MM -MAX.STRETCHING WIDTH:7446MM -OUTLET WIDTH:6000-6700MM -PREHEATING ZONE: 3 M X 4ZONE / 4.5M X 2ZONES -STRETCHING ZONE; 3 M X5ZONE -ANNEALING ZONE: 1M X 1ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 132 KW AC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC YURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1200MM 7.SLITTER MAKE:KAMPF(GERMANY) MAX. SPEED: 1000M/MIN MAX. WORKING WIDTH: 6500MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1200MM NUMBER OF REWINDER STATION;14 REWINDING WIDTH: 300-3000MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-bopp plant  x2 (biaxially oriented polypropylene film production lines)

(1st plant)

make:bruckner(germany)

manufacturing year:1989

capacity: 13,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-50 micron

film width(trimmed);6500mm

mechanical and thermal layout:

thickness 12 micron / speed 220m/min / output 927kg/h

thickness 20 micron / speed 200m/min / output 1404kg/h

thickness 25 micron / speed 170m/min / output 1492kg/h

thickness 30 micron / speed 165m/min / output 1737kg/h

thickness 40 micron / speed 110m/min / output 1544kg/h

thickness 50 micron / speed 85m/min / output 1492kg/h

stretch ratio:machine direction 1:1~ 1:6

transverse direction: 1:6~1:10

speed:max.300m/min

production speed: 220m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 2400kg/h)

b.dosinf for satellite extruder: 2sets)(150kg/h, 150kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm, 21 d, 880kw dc motor

-melting extruder:dia.225mm, 20d. 338kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.75mm,30d,59kw dc motor, max.output 100kg/h

c.polymer filter for main extruder

-type:long life filter , 19 candles

-filter area: approx. 1.4m2

-heating:thermal oil heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:43ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-ddia.2000mm width 1200mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:650-800mm

-max.stretching width:7500mm

-outlet width:6000-6900mm

-preheating zone: 3 m x 5zone 

-stretching zone; 3 m x4zone

-annealing zone: 3m x 4zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 125 kw dc motor

    

5.thickness gauge: kamma ray 

6.winder

-automatic turret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1000mm

7.slitter

make:atlas

max. speed: 600m/min

max. working width: 6600mm

max. diameter of mill roll on unwinder:1000mm

number of rewinder station;12

rewinding width: 300-3000mm

  
  (2nd plant)  

make:mitsubishi(japan)

manufacturing year:1993

capacity: 14,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-60 micron

film width(trimmed);6300mm

mechanical and thermal layout:

thickness 12 micron / speed 240m/min / output 980kg/h

thickness 20 micron / speed 220m/min / output 1497kg/h

thickness 25 micron / speed 195m/min / output 1658kg/h

thickness 30 micron / speed 180m/min / output 1837kg/h

thickness 40 micron / speed 120m/min / output 1633kg/h

thickness 50 micron / speed 90m/min / output 1531kg/h

stretch ratio:machine direction 1:1~ 1:10

transverse direction: 1:7~1:10

speed:max.320m/min

production speed: 240m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 4000kg/h)

b.dosinf for satellite extruder: 2sets)800kg/h, 500kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm,700kw dc motor

-melting extruder:dia.220mm,350kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.115mm,160kw dc motor, max.output 300kg/h

-dia.90mm,90kw dc motor, max.output 200kg/h

c.polymer filter for main extruder

-type:multi disc type filter, 12 pieces

-filter area: approx. 2m2

-heating:electric heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:29ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-dia.1000mm 1ea, dia.2000mm x2ea, width 1300mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:600-1000mm

-max.stretching width:7446mm

-outlet width:6000-6700mm

-preheating zone: 3 m x 4zone / 4.5m x 2zones

-stretching zone; 3 m x5zone

-annealing zone: 1m x 1zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 132 kw ac motor

   

5.thickness gauge: kamma ray 

6.winder

-automatic yurret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1200mm

7.slitter

make:kampf(germany)

max. speed: 1000m/min

max. working width: 6500mm

max. diameter of mill roll on unwinder:1200mm

number of rewinder station;14

rewinding width: 300-3000mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


  
  BOPP PLANT X2 (BIAXIALLY ORIENTED POLYPROPYLENE FILM PRODUCTION LINES) (1ST PLANT) MAKE:BRUCKNER(GERMANY) MANUFACTURING YEAR:1989 CAPACITY: 13,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-50 MICRON FILM WIDTH(TRIMMED);6500MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 220M/MIN / OUTPUT 927KG/H THICKNESS 20 MICRON / SPEED 200M/MIN / OUTPUT 1404KG/H THICKNESS 25 MICRON / SPEED 170M/MIN / OUTPUT 1492KG/H THICKNESS 30 MICRON / SPEED 165M/MIN / OUTPUT 1737KG/H THICKNESS 40 MICRON / SPEED 110M/MIN / OUTPUT 1544KG/H THICKNESS 50 MICRON / SPEED 85M/MIN / OUTPUT 1492KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:6 TRANSVERSE DIRECTION: 1:6~1:10 SPEED:MAX.300M/MIN PRODUCTION SPEED: 220M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 2400KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)(150KG/H, 150KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM, 21 D, 880KW DC MOTOR -MELTING EXTRUDER:DIA.225MM, 20D. 338KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.75MM,30D,59KW DC MOTOR, MAX.OUTPUT 100KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:LONG LIFE FILTER , 19 CANDLES -FILTER AREA: APPROX. 1.4M2 -HEATING:THERMAL OIL HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:43EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DDIA.2000MM WIDTH 1200MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:650-800MM -MAX.STRETCHING WIDTH:7500MM -OUTLET WIDTH:6000-6900MM -PREHEATING ZONE: 3 M X 5ZONE -STRETCHING ZONE; 3 M X4ZONE -ANNEALING ZONE: 3M X 4ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 125 KW DC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC TURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1000MM 7.SLITTER MAKE:ATLAS MAX. SPEED: 600M/MIN MAX. WORKING WIDTH: 6600MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1000MM NUMBER OF REWINDER STATION;12 REWINDING WIDTH: 300-3000MM (2ND PLANT) MAKE:MITSUBISHI(JAPAN) MANUFACTURING YEAR:1993 CAPACITY: 14,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-60 MICRON FILM WIDTH(TRIMMED);6300MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 240M/MIN / OUTPUT 980KG/H THICKNESS 20 MICRON / SPEED 220M/MIN / OUTPUT 1497KG/H THICKNESS 25 MICRON / SPEED 195M/MIN / OUTPUT 1658KG/H THICKNESS 30 MICRON / SPEED 180M/MIN / OUTPUT 1837KG/H THICKNESS 40 MICRON / SPEED 120M/MIN / OUTPUT 1633KG/H THICKNESS 50 MICRON / SPEED 90M/MIN / OUTPUT 1531KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:10 TRANSVERSE DIRECTION: 1:7~1:10 SPEED:MAX.320M/MIN PRODUCTION SPEED: 240M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 4000KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)800KG/H, 500KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM,700KW DC MOTOR -MELTING EXTRUDER:DIA.220MM,350KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.115MM,160KW DC MOTOR, MAX.OUTPUT 300KG/H -DIA.90MM,90KW DC MOTOR, MAX.OUTPUT 200KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:MULTI DISC TYPE FILTER, 12 PIECES -FILTER AREA: APPROX. 2M2 -HEATING:ELECTRIC HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:29EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DIA.1000MM 1EA, DIA.2000MM X2EA, WIDTH 1300MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:600-1000MM -MAX.STRETCHING WIDTH:7446MM -OUTLET WIDTH:6000-6700MM -PREHEATING ZONE: 3 M X 4ZONE / 4.5M X 2ZONES -STRETCHING ZONE; 3 M X5ZONE -ANNEALING ZONE: 1M X 1ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 132 KW AC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC YURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1200MM 7.SLITTER MAKE:KAMPF(GERMANY) MAX. SPEED: 1000M/MIN MAX. WORKING WIDTH: 6500MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1200MM NUMBER OF REWINDER STATION;14 REWINDING WIDTH: 300-3000MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-bopp plant  x2 (biaxially oriented polypropylene film production lines)

(1st plant)

make:bruckner(germany)

manufacturing year:1989

capacity: 13,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-50 micron

film width(trimmed);6500mm

mechanical and thermal layout:

thickness 12 micron / speed 220m/min / output 927kg/h

thickness 20 micron / speed 200m/min / output 1404kg/h

thickness 25 micron / speed 170m/min / output 1492kg/h

thickness 30 micron / speed 165m/min / output 1737kg/h

thickness 40 micron / speed 110m/min / output 1544kg/h

thickness 50 micron / speed 85m/min / output 1492kg/h

stretch ratio:machine direction 1:1~ 1:6

transverse direction: 1:6~1:10

speed:max.300m/min

production speed: 220m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 2400kg/h)

b.dosinf for satellite extruder: 2sets)(150kg/h, 150kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm, 21 d, 880kw dc motor

-melting extruder:dia.225mm, 20d. 338kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.75mm,30d,59kw dc motor, max.output 100kg/h

c.polymer filter for main extruder

-type:long life filter , 19 candles

-filter area: approx. 1.4m2

-heating:thermal oil heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:43ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-ddia.2000mm width 1200mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:650-800mm

-max.stretching width:7500mm

-outlet width:6000-6900mm

-preheating zone: 3 m x 5zone 

-stretching zone; 3 m x4zone

-annealing zone: 3m x 4zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 125 kw dc motor

    

5.thickness gauge: kamma ray 

6.winder

-automatic turret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1000mm

7.slitter

make:atlas

max. speed: 600m/min

max. working width: 6600mm

max. diameter of mill roll on unwinder:1000mm

number of rewinder station;12

rewinding width: 300-3000mm

  
  (2nd plant)  

make:mitsubishi(japan)

manufacturing year:1993

capacity: 14,000 ton/year(30micron thickness,7500 hour operating)

type of film:biaxially oriented polypropylene(3 layer)

thickness:12-60 micron

film width(trimmed);6300mm

mechanical and thermal layout:

thickness 12 micron / speed 240m/min / output 980kg/h

thickness 20 micron / speed 220m/min / output 1497kg/h

thickness 25 micron / speed 195m/min / output 1658kg/h

thickness 30 micron / speed 180m/min / output 1837kg/h

thickness 40 micron / speed 120m/min / output 1633kg/h

thickness 50 micron / speed 90m/min / output 1531kg/h

stretch ratio:machine direction 1:1~ 1:10

transverse direction: 1:7~1:10

speed:max.320m/min

production speed: 240m/min

edge: trim: recycling system

(detail specification)

1.raw material supply

a.dosing for main extruder: 1set( 4000kg/h)

b.dosinf for satellite extruder: 2sets)800kg/h, 500kg/h)

2.extrusion

a.main extruder:

-melting extruder:dia.175mm,700kw dc motor

-melting extruder:dia.220mm,350kw dc motor

-max.output 2400kg/h

b.satellite extruder 2 sets

-dia.115mm,160kw dc motor, max.output 300kg/h

-dia.90mm,90kw dc motor, max.output 200kg/h

c.polymer filter for main extruder

-type:multi disc type filter, 12 pieces

-filter area: approx. 2m2

-heating:electric heating

d.die

-3 layer die with automatic gap adjustment

-die bolts:29ea,push/pull type heating bolt

-lip width:920mm

3.casting unit

a.chilling roll

-dia.1000mm 1ea, dia.2000mm x2ea, width 1300mm

-crom plated and polished surface

4.transverse direction orienter(tdo)

-inlet width:600-1000mm

-max.stretching width:7446mm

-outlet width:6000-6700mm

-preheating zone: 3 m x 4zone / 4.5m x 2zones

-stretching zone; 3 m x5zone

-annealing zone: 1m x 1zone

-cooling zone:3m x2 zone

-oven heating: steam radiator

-drive 132 kw ac motor

   

5.thickness gauge: kamma ray 

6.winder

-automatic yurret winding

-winding core: 450mm,length 7100mm

max. mill roll diameter:1200mm

7.slitter

make:kampf(germany)

max. speed: 1000m/min

max. working width: 6500mm

max. diameter of mill roll on unwinder:1200mm

number of rewinder station;14

rewinding width: 300-3000mm

  
 bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

 BOPP PLANT X2 (BIAXIALLY ORIENTED POLYPROPYLENE FILM PRODUCTION LINES) (1ST PLANT) MAKE:BRUCKNER(GERMANY) MANUFACTURING YEAR:1989 CAPACITY: 13,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-50 MICRON FILM WIDTH(TRIMMED);6500MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 220M/MIN / OUTPUT 927KG/H THICKNESS 20 MICRON / SPEED 200M/MIN / OUTPUT 1404KG/H THICKNESS 25 MICRON / SPEED 170M/MIN / OUTPUT 1492KG/H THICKNESS 30 MICRON / SPEED 165M/MIN / OUTPUT 1737KG/H THICKNESS 40 MICRON / SPEED 110M/MIN / OUTPUT 1544KG/H THICKNESS 50 MICRON / SPEED 85M/MIN / OUTPUT 1492KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:6 TRANSVERSE DIRECTION: 1:6~1:10 SPEED:MAX.300M/MIN PRODUCTION SPEED: 220M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 2400KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)(150KG/H, 150KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM, 21 D, 880KW DC MOTOR -MELTING EXTRUDER:DIA.225MM, 20D. 338KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.75MM,30D,59KW DC MOTOR, MAX.OUTPUT 100KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:LONG LIFE FILTER , 19 CANDLES -FILTER AREA: APPROX. 1.4M2 -HEATING:THERMAL OIL HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:43EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DDIA.2000MM WIDTH 1200MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:650-800MM -MAX.STRETCHING WIDTH:7500MM -OUTLET WIDTH:6000-6900MM -PREHEATING ZONE: 3 M X 5ZONE -STRETCHING ZONE; 3 M X4ZONE -ANNEALING ZONE: 3M X 4ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 125 KW DC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC TURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1000MM 7.SLITTER MAKE:ATLAS MAX. SPEED: 600M/MIN MAX. WORKING WIDTH: 6600MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1000MM NUMBER OF REWINDER STATION;12 REWINDING WIDTH: 300-3000MM (2ND PLANT) MAKE:MITSUBISHI(JAPAN) MANUFACTURING YEAR:1993 CAPACITY: 14,000 TON/YEAR(30MICRON THICKNESS,7500 HOUR OPERATING) TYPE OF FILM:BIAXIALLY ORIENTED POLYPROPYLENE(3 LAYER) THICKNESS:12-60 MICRON FILM WIDTH(TRIMMED);6300MM MECHANICAL AND THERMAL LAYOUT: THICKNESS 12 MICRON / SPEED 240M/MIN / OUTPUT 980KG/H THICKNESS 20 MICRON / SPEED 220M/MIN / OUTPUT 1497KG/H THICKNESS 25 MICRON / SPEED 195M/MIN / OUTPUT 1658KG/H THICKNESS 30 MICRON / SPEED 180M/MIN / OUTPUT 1837KG/H THICKNESS 40 MICRON / SPEED 120M/MIN / OUTPUT 1633KG/H THICKNESS 50 MICRON / SPEED 90M/MIN / OUTPUT 1531KG/H STRETCH RATIO:MACHINE DIRECTION 1:1~ 1:10 TRANSVERSE DIRECTION: 1:7~1:10 SPEED:MAX.320M/MIN PRODUCTION SPEED: 240M/MIN EDGE: TRIM: RECYCLING SYSTEM (DETAIL SPECIFICATION) 1.RAW MATERIAL SUPPLY A.DOSING FOR MAIN EXTRUDER: 1SET( 4000KG/H) B.DOSINF FOR SATELLITE EXTRUDER: 2SETS)800KG/H, 500KG/H) 2.EXTRUSION A.MAIN EXTRUDER: -MELTING EXTRUDER:DIA.175MM,700KW DC MOTOR -MELTING EXTRUDER:DIA.220MM,350KW DC MOTOR -MAX.OUTPUT 2400KG/H B.SATELLITE EXTRUDER 2 SETS -DIA.115MM,160KW DC MOTOR, MAX.OUTPUT 300KG/H -DIA.90MM,90KW DC MOTOR, MAX.OUTPUT 200KG/H C.POLYMER FILTER FOR MAIN EXTRUDER -TYPE:MULTI DISC TYPE FILTER, 12 PIECES -FILTER AREA: APPROX. 2M2 -HEATING:ELECTRIC HEATING D.DIE -3 LAYER DIE WITH AUTOMATIC GAP ADJUSTMENT -DIE BOLTS:29EA,PUSH/PULL TYPE HEATING BOLT -LIP WIDTH:920MM 3.CASTING UNIT A.CHILLING ROLL -DIA.1000MM 1EA, DIA.2000MM X2EA, WIDTH 1300MM -CROM PLATED AND POLISHED SURFACE 4.TRANSVERSE DIRECTION ORIENTER(TDO) -INLET WIDTH:600-1000MM -MAX.STRETCHING WIDTH:7446MM -OUTLET WIDTH:6000-6700MM -PREHEATING ZONE: 3 M X 4ZONE / 4.5M X 2ZONES -STRETCHING ZONE; 3 M X5ZONE -ANNEALING ZONE: 1M X 1ZONE -COOLING ZONE:3M X2 ZONE -OVEN HEATING: STEAM RADIATOR -DRIVE 132 KW AC MOTOR 5.THICKNESS GAUGE: KAMMA RAY 6.WINDER -AUTOMATIC YURRET WINDING -WINDING CORE: 450MM,LENGTH 7100MM MAX. MILL ROLL DIAMETER:1200MM 7.SLITTER MAKE:KAMPF(GERMANY) MAX. SPEED: 1000M/MIN MAX. WORKING WIDTH: 6500MM MAX. DIAMETER OF MILL ROLL ON UNWINDER:1200MM NUMBER OF REWINDER STATION;14 REWINDING WIDTH: 300-3000MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BRUCKNER types: