45 ofertas

Año de construcción: usado
Ubicación: Land-one used bruderer bsta 60hl high speed press,
**machine under refurbishment.**
 original year of mfg 1977. swiss origin.
 60 tons capacity, underdrive type.
 adjustable stroke 20 to 76 mm.
 speed range 100 to 750 strokes per minute max.
 bolster area 770 mm x 620 mm
 roll feed bbv 202/120 fitted on left-hand side.
 max width of strip 200 mm.
 electric supply 380 volts, 50 cycles.
 weight of press approx. 8000 kgs.

 
 ONE USED BRUDERER BSTA 60HL HIGH SPEED PRESS, **MACHINE UNDER REFURBISHMENT.** ORIGINAL YEAR OF MFG 1977. SWISS ORIGIN. 60 TONS CAPACITY, UNDERDRIVE TYPE. ADJUSTABLE STROKE 20 TO 76 MM. SPEED RANGE 100 TO 750 STROKES PER MINUTE MAX. BOLSTER AREA 770 MM X 620 MM ROLL FEED BBV 202/120 FITTED ON LEFT-HAND SIDE. MAX WIDTH OF STRIP 200 MM. ELECTRIC SUPPLY 380 VOLTS, 50 CYCLES. WEIGHT OF PRESS APPROX. 8000 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-pressure: 60 ton ram stroke adjustable: 20 - 76 mm ram adjustment: 64 mm free frontal opening l-r: 920 mm table surface area : 920 x 760 mm ram surface area: 850 x 456 mm hole in table: 800 x 260 mm bruderer double roll precision feed: bbv 202/120  number of strokes: 70 - 650 s.p.m. height over floor approx.: 2.220 mm required power: 28  kw weight of machine approx.: 7,5 ton PRESSURE: 60 TON RAM STROKE ADJUSTABLE: 20 - 76 MM RAM ADJUSTMENT: 64 MM FREE FRONTAL OPENING L-R: 920 MM TABLE SURFACE AREA : 920 X 760 MM RAM SURFACE AREA: 850 X 456 MM HOLE IN TABLE: 800 X 260 MM BRUDERER DOUBLE ROLL PRECISION FEED: BBV 202/120 NUMBER OF STROKES: 70 - 650 S.P.M. HEIGHT OVER FLOOR APPROX.: 2.220 MM REQUIRED POWER: 28 KW WEIGHT OF MACHINE APPROX.: 7,5 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-one used bruderer bsta 41 high speed punch press.
original year of mfg 1983. swiss origin.
hydrostatic drive. analogue controls.
nominal capacity 40 tons.
adjustable stroke 13 - 57 mm.
speed range 100 to 1200 strokes per minute max.
bolster (tool clamping) area 670 mm x 550 mm.
max tool loading width 690 mm left to right.
fitted with bbv 202/120 roll feed on left-hand side.
max strip width 200 mm.
front and rear safety guards.
operators control cabinet freestanding.
power supply 400 volt, 50 hz.
weight of press approx. 6000 kgs.
  ONE USED BRUDERER BSTA 41 HIGH SPEED PUNCH PRESS. ORIGINAL YEAR OF MFG 1983. SWISS ORIGIN. HYDROSTATIC DRIVE. ANALOGUE CONTROLS. NOMINAL CAPACITY 40 TONS. ADJUSTABLE STROKE 13 - 57 MM. SPEED RANGE 100 TO 1200 STROKES PER MINUTE MAX. BOLSTER (TOOL CLAMPING) AREA 670 MM X 550 MM. MAX TOOL LOADING WIDTH 690 MM LEFT TO RIGHT. FITTED WITH BBV 202/120 ROLL FEED ON LEFT-HAND SIDE. MAX STRIP WIDTH 200 MM. FRONT AND REAR SAFETY GUARDS. OPERATORS CONTROL CABINET FREESTANDING. POWER SUPPLY 400 VOLT, 50 HZ. WEIGHT OF PRESS APPROX. 6000 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-pressure: 60 ton ram stroke adjustable: 20 - 76 mm free frontal opening l-r: 920 mm table surface area : 920 x 760 mm ram surface area: 850 x 456 mm hole in table: 800 x 260 mm bruderer double roll precision feed: bbv 202/120  number of strokes: 70 - 650 s.p.m. height over floor approx.: 2.220 mm weight of machine approx.: 7,5 ton PRESSURE: 60 TON RAM STROKE ADJUSTABLE: 20 - 76 MM FREE FRONTAL OPENING L-R: 920 MM TABLE SURFACE AREA : 920 X 760 MM RAM SURFACE AREA: 850 X 456 MM HOLE IN TABLE: 800 X 260 MM BRUDERER DOUBLE ROLL PRECISION FEED: BBV 202/120 NUMBER OF STROKES: 70 - 650 S.P.M. HEIGHT OVER FLOOR APPROX.: 2.220 MM WEIGHT OF MACHINE APPROX.: 7,5 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-high speed press:

producer: mabu
stroke power 500 kn (50 tons)
year 09/98 / beckhoff control 2017
machine in mint condition with new beckhoff control
made in germany

stroke adjustment (hub): 7-60 mm

strokes per minute 80-500 spm

four pillar

table dimension is 740 x 565 mm.

side passage width 330 mm.

including two servo feeders:
zehnder & sommer ev 12 ak (2 stk.)

including two soprem decoiler and recoiler


weight cca. 4 ton
motor 5.5 kw
on stock more high speed presses bruderer.
 HIGH SPEED PRESS: PRODUCER: MABU STROKE POWER 500 KN (50 TONS) YEAR 09/98 / BECKHOFF CONTROL 2017 MACHINE IN MINT CONDITION WITH NEW BECKHOFF CONTROL MADE IN GERMANY STROKE ADJUSTMENT (HUB): 7-60 MM STROKES PER MINUTE 80-500 SPM FOUR PILLAR TABLE DIMENSION IS 740 X 565 MM. SIDE PASSAGE WIDTH 330 MM. INCLUDING TWO SERVO FEEDERS: ZEHNDER & SOMMER EV 12 AK (2 STK.) INCLUDING TWO SOPREM DECOILER AND RECOILER WEIGHT CCA. 4 TON MOTOR 5.5 KW ON STOCK MORE HIGH SPEED PRESSES BRUDERER.
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-pressure:     50 t<br/>no  of strokes:   1200 hub/min<br/>sheet width:  mm<br/>--------------------------------------------------:  <br/>press design:  <br/>- drive system: knuckle-joint:        <br/>press forces:  <br/>- total force (nominal):     50 to<br/>press table:  <br/>- table surface (left-right):    760 mm<br/>- table surface (front-back):    650 mm<br/>slide:  <br/>- stroke rate (max.):   1200 /min<br/>slide (mechan. press):  <br/>- stroke min.:     16 mm<br/>- stroke max.:     51 mm<br/>- variable speed: yes:        <br/>- stroke rate (min.):    100 /min<br/>- stroke rate (max.):   1200 /min<br/>electrical specifications:  <br/>- mains power supply:     57 kva<br/>- mains voltage:    400 v<br/>dimensions / weights:  <br/>- total weight approx.:   8000 kg<br/>attachments (presses):  <br/>- decoiler: yes:        <br/>- leveller unit: yes:        <br/>- strip feeder: yes:        <br/><br/><br/><br/><br/> PRESSURE: 50 T
NO OF STROKES: 1200 HUB/MIN
SHEET WIDTH: MM
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: KNUCKLE-JOINT:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 50 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 760 MM
- TABLE SURFACE (FRONT-BACK): 650 MM
SLIDE:
- STROKE RATE (MAX.): 1200 /MIN
SLIDE (MECHAN. PRESS):
- STROKE MIN.: 16 MM
- STROKE MAX.: 51 MM
- VARIABLE SPEED: YES:
- STROKE RATE (MIN.): 100 /MIN
- STROKE RATE (MAX.): 1200 /MIN
ELECTRICAL SPECIFICATIONS:
- MAINS POWER SUPPLY: 57 KVA
- MAINS VOLTAGE: 400 V
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 8000 KG
ATTACHMENTS (PRESSES):
- DECOILER: YES:
- LEVELLER UNIT: YES:
- STRIP FEEDER: YES:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 32.000 €
Ubicación: Land-type: haulick & roos rv80
capacity: 80 tons
spm: 65 to 400
stroke adjustment: 10 - 80
table size: 600 x 635 mm
year of construction: 1974

servo feeder:
alba wuppertal vhy300 / 0.1
max. bandwidth: 300mm
max. band thickness: 3.0mm
incl. greasing device and reservoir
year of construction: 09/1983

straightening machine:
dreher / dimeco-besancon
working width: 300mm

decoiler:
dreher / dimeco-besancon
type: 2350dm
model: 531
year of construction: 09/1978

weight cca 12.400 kg
beside this press we have plenty of bruderer bsta high speed presses. TYPE: HAULICK & ROOS RV80 CAPACITY: 80 TONS SPM: 65 TO 400 STROKE ADJUSTMENT: 10 - 80 TABLE SIZE: 600 X 635 MM YEAR OF CONSTRUCTION: 1974 SERVO FEEDER: ALBA WUPPERTAL VHY300 / 0.1 MAX. BANDWIDTH: 300MM MAX. BAND THICKNESS: 3.0MM INCL. GREASING DEVICE AND RESERVOIR YEAR OF CONSTRUCTION: 09/1983 STRAIGHTENING MACHINE: DREHER / DIMECO-BESANCON WORKING WIDTH: 300MM DECOILER: DREHER / DIMECO-BESANCON TYPE: 2350DM MODEL: 531 YEAR OF CONSTRUCTION: 09/1978 WEIGHT CCA 12.400 KG BESIDE THIS PRESS WE HAVE PLENTY OF BRUDERER BSTA HIGH SPEED PRESSES.
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-pressure: 25 ton ram stroke adjustable: 13 - 38 mm ram adjustment: 51 mm shut height (stroke down, adjustment up): 230 - 281 mm max. die size: 430 x 360 mm number of strokes: 60 - 1.500 s.p.m. leveller / straightener   sheet width: 120 - 300 mm PRESSURE: 25 TON RAM STROKE ADJUSTABLE: 13 - 38 MM RAM ADJUSTMENT: 51 MM SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP): 230 - 281 MM MAX. DIE SIZE: 430 X 360 MM NUMBER OF STROKES: 60 - 1.500 S.P.M. LEVELLER / STRAIGHTENER SHEET WIDTH: 120 - 300 MM
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Precio: 21.000 €
Ubicación: Land-bruderer bsta 30

pressure 30 ton
up to 600 number of strokes/min feeder from left to right
table size: 545 x 470 mm
central lubrication
total power requirement: 5.5 kw
weight of the machine: 2.5t
 BRUDERER BSTA 30 PRESSURE 30 TON UP TO 600 NUMBER OF STROKES/MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM CENTRAL LUBRICATION TOTAL POWER REQUIREMENT: 5.5 KW WEIGHT OF THE MACHINE: 2.5T
Vendedor: Mobilija.DOO
Año de construcción: usado
Ubicación: Land-pressure: 18 t<br/>no. of strokes: 100-600 hub/min<br/>hole in the table: 105x140 mm<br/>ram diameter: Ø 195 mm<br/>total power requirement: 3,2 kw<br/>weight of the machine ca.: 1,5 t<br/><br/><br/><br/><br/> PRESSURE: 18 T
NO. OF STROKES: 100-600 HUB/MIN
HOLE IN THE TABLE: 105X140 MM
RAM DIAMETER: Ø 195 MM
TOTAL POWER REQUIREMENT: 3,2 KW
WEIGHT OF THE MACHINE CA.: 1,5 T




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-there are two identical machines available, stroke: 20mm, max. stroke speed: 1120/min, max. punching pressure: 400kn, connected load: 20kw, compressed air supply: 6-10bar, year of construction machine 1/ 2: 1986/ 1989.  THERE ARE TWO IDENTICAL MACHINES AVAILABLE, STROKE: 20MM, MAX. STROKE SPEED: 1120/MIN, MAX. PUNCHING PRESSURE: 400KN, CONNECTED LOAD: 20KW, COMPRESSED AIR SUPPLY: 6-10BAR, YEAR OF CONSTRUCTION MACHINE 1/ 2: 1986/ 1989.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 0 mm<br/>plate thickness: 0 mm<br/>plate length:  mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SHEET WIDTH: 0 MM
PLATE THICKNESS: 0 MM
PLATE LENGTH: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-one used bruderer bsta50 h high speed punch press.
refurbished/rebuilt in 2002.
50 tons (500 kn) nominal capacity.
adjustable stroke 16 to 51 mm.
speed range 100 to 1200 spm max.
bolster area 760 mm x 650 mm.
fitted with roll feed bbv 202/120 on right-hand side.
max width of strip 200 mm.
electrical control cabinet freestanding.
oil cooler. spring feet.
weight of machine approx 8000 kgs.
 ONE USED BRUDERER BSTA50 H HIGH SPEED PUNCH PRESS. REFURBISHED/REBUILT IN 2002. 50 TONS (500 KN) NOMINAL CAPACITY. ADJUSTABLE STROKE 16 TO 51 MM. SPEED RANGE 100 TO 1200 SPM MAX. BOLSTER AREA 760 MM X 650 MM. FITTED WITH ROLL FEED BBV 202/120 ON RIGHT-HAND SIDE. MAX WIDTH OF STRIP 200 MM. ELECTRICAL CONTROL CABINET FREESTANDING. OIL COOLER. SPRING FEET. WEIGHT OF MACHINE APPROX 8000 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-pressure: 18 ton ram stroke adjustable: 4 - 36 mm ram adjustment: 40 mm shut height (stroke down, adjustment up): 140 +/- 20 mm mm table surface area : 350 x 310 mm number of strokes: 100 - 600 s.p.m. required power: 1,7 kw height over floor approx.: 1.740 mm weight of machine approx.: 1,1 ton PRESSURE: 18 TON RAM STROKE ADJUSTABLE: 4 - 36 MM RAM ADJUSTMENT: 40 MM SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP): 140 +/- 20 MM MM TABLE SURFACE AREA : 350 X 310 MM NUMBER OF STROKES: 100 - 600 S.P.M. REQUIRED POWER: 1,7 KW HEIGHT OVER FLOOR APPROX.: 1.740 MM WEIGHT OF MACHINE APPROX.: 1,1 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-bruderer bsta 30 pressure 30 tons up to 600 number of strokes / min feeder from left to right table size: 545 x 470 mm j7000r central lubrication total power requirement: 5.5 kw weight of the machine: 2, 5t
classical control table BRUDERER BSTA 30 PRESSURE 30 TONS UP TO 600 NUMBER OF STROKES / MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM J7000R CENTRAL LUBRICATION TOTAL POWER REQUIREMENT: 5.5 KW WEIGHT OF THE MACHINE: 2, 5T CLASSICAL CONTROL TABLE
Vendedor: Mobilija.DOO
Año de construcción: usado
Ubicación: Land-pressure: 18 ton ram stroke adjustable: 4 - 36 mm ram adjustment: 40 mm shut height (stroke down, adjustment up): 140 +/- 20 mm mm table surface area : 350 x 310 mm number of strokes: 100 - 600 s.p.m. required power: 1,7 kw height over floor approx.: 1.740 mm weight of machine approx.: 1,1 ton PRESSURE: 18 TON RAM STROKE ADJUSTABLE: 4 - 36 MM RAM ADJUSTMENT: 40 MM SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP): 140 +/- 20 MM MM TABLE SURFACE AREA : 350 X 310 MM NUMBER OF STROKES: 100 - 600 S.P.M. REQUIRED POWER: 1,7 KW HEIGHT OVER FLOOR APPROX.: 1.740 MM WEIGHT OF MACHINE APPROX.: 1,1 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-bruderer bsta 30 

pressure 30 tons 
up to 600 number of strokes / min 
feeder from left to right 
table size: 545 x 470 mm 
j7000r 
central lubrication 
total power requirement : 5,5 kw 
weight of the machine: 2,5t
classical control table  BRUDERER BSTA 30 PRESSURE 30 TONS UP TO 600 NUMBER OF STROKES / MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM J7000R CENTRAL LUBRICATION TOTAL POWER REQUIREMENT : 5,5 KW WEIGHT OF THE MACHINE: 2,5T CLASSICAL CONTROL TABLE
Vendedor: Mobilija.DOO
Año de construcción: usado
Ubicación: Land-pressure: 30 ton ram stroke adjustable: 8 - 40 mm ram adjustment: 40 mm shut height (stroke down, adjustment up): 230 +/-20 mm free lateral opening f-b: 170 mm table surface area : 540 x 470 mm ram surface area: 250 mm number of strokes: 100 - 600 s.p.m. required power: 5,5 kw dimensions l x w x h: 2.150 x 1.200 x 1.160 mm weight of machine approx.: 2,5 ton PRESSURE: 30 TON RAM STROKE ADJUSTABLE: 8 - 40 MM RAM ADJUSTMENT: 40 MM SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP): 230 +/-20 MM FREE LATERAL OPENING F-B: 170 MM TABLE SURFACE AREA : 540 X 470 MM RAM SURFACE AREA: 250 MM NUMBER OF STROKES: 100 - 600 S.P.M. REQUIRED POWER: 5,5 KW DIMENSIONS L X W X H: 2.150 X 1.200 X 1.160 MM WEIGHT OF MACHINE APPROX.: 2,5 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-capacity 25 tons
adjustable stroke
table mounting surface: l 540 mm x w 530 mm
stroke adjustment: from 13 mm to 38 mm
number of strokes: from 100 h / min to 1500 h / min
feed bbv 202/120
max feed step 120 mm
max width 202 mm
connection 50/60 hz 3x 400 volt
technical air 8 bar
including sound cabin
el.control siemens touch 19 CAPACITY 25 TONS ADJUSTABLE STROKE TABLE MOUNTING SURFACE: L 540 MM X W 530 MM STROKE ADJUSTMENT: FROM 13 MM TO 38 MM NUMBER OF STROKES: FROM 100 H / MIN TO 1500 H / MIN FEED BBV 202/120 MAX FEED STEP 120 MM MAX WIDTH 202 MM CONNECTION 50/60 HZ 3X 400 VOLT TECHNICAL AIR 8 BAR INCLUDING SOUND CABIN EL.CONTROL SIEMENS TOUCH 19 " AND PLC MACHINE IS IN PERFECT CONDITION WEIGHT APPROX. 4500 KG
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-pressure:030 t<br/>stroke:8 - 40 mm<br/>no. of strokes:100 - 600 /min<br/>distance between columns:325 mm<br/>distance table/ram, max. stroke up, adjustment up:250 mm<br/>table surface area:540 x 300 / 325 x 395 mm<br/>hole in the table:315 x 110 mm<br/>table height over floor:1000 mm<br/>column travel -side:290 mm<br/>ram surface:250 mm<br/>ram adjustment: mm<br/>material width of feeder:120 mm<br/>material thickness of feeder:3,0 mm<br/>feed length:60 mm<br/>power requirement:5,5 kw<br/>weight:2,6 t<br/>dimensions (wxdxh):1,5 x 1,2 x 2,2 m<br/>list price: in running function in our warehouse: <br/>clutch:pneumatic <br/>roll feed:mechanical, bruderer bbv 120/60 <br/><br/> PRESSURE:030 T
STROKE:8 - 40 MM
NO. OF STROKES:100 - 600 /MIN
DISTANCE BETWEEN COLUMNS:325 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:250 MM
TABLE SURFACE AREA:540 X 300 / 325 X 395 MM
HOLE IN THE TABLE:315 X 110 MM
TABLE HEIGHT OVER FLOOR:1000 MM
COLUMN TRAVEL -SIDE:290 MM
RAM SURFACE:250 MM
RAM ADJUSTMENT: MM
MATERIAL WIDTH OF FEEDER:120 MM
MATERIAL THICKNESS OF FEEDER:3,0 MM
FEED LENGTH:60 MM
POWER REQUIREMENT:5,5 KW
WEIGHT:2,6 T
DIMENSIONS (WXDXH):1,5 X 1,2 X 2,2 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
CLUTCH:PNEUMATIC
ROLL FEED:MECHANICAL, BRUDERER BBV 120/60

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-max. pressing force: 2500kn, max. shut height: 400mm, security distance: 130mm, stroke speed: 5-40/min, compressed air supply: 8-10bar, operational pressure: 230bar, connected load: 48kw, machine is in need of repair, control cabinet electronics, knee lever and hydraulics need to be maintained. MAX. PRESSING FORCE: 2500KN, MAX. SHUT HEIGHT: 400MM, SECURITY DISTANCE: 130MM, STROKE SPEED: 5-40/MIN, COMPRESSED AIR SUPPLY: 8-10BAR, OPERATIONAL PRESSURE: 230BAR, CONNECTED LOAD: 48KW, MACHINE IS IN NEED OF REPAIR, CONTROL CABINET ELECTRONICS, KNEE LEVER AND HYDRAULICS NEED TO BE MAINTAINED.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-<br>capacity (metric tons) 20<br>number of strokes per/min.  1800<br>day light (mm) 191.5 - 261<br>front distance between columns (mm) 360<br>
CAPACITY (METRIC TONS) 20
NUMBER OF STROKES PER/MIN. 1800
DAY LIGHT (MM) 191.5 - 261
FRONT DISTANCE BETWEEN COLUMNS (MM) 360
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-bruderer bsta 80h 
high speed press
made in switzerland
production year 1988
machine in full working condition, ready to work.

max. pressure: 80 tons 800 kn
speed:
-max.: 1000 1/min
-min.: 100 1/min
mains voltage (with protective conductor): 220 v, 380 v, 440 v
mains frequency: 50 hz, 60 hz
power supply: 43 kw
control voltage ac: 24 v
compressed air connection: 6-10 bar
ram position adjustment: 76 mm
average mass of tool upper part: 600 kg
bolster area:
-l-r: 950 mm
-f-b: 910 mm
ram area:
-l-r: 760 mm
-f-b: 510 mm
max. tool width clearance (l-r): 970 mm
strip inlet height:
-max.: 160 mm
-min.: 70 mm

feeder bruderer on left side bbv 202/120
max. strip inlet width: 202 mm
strip feed pitch: 0-120 mm

bed opening:
-l-r: 920 mm
-f-b: 320 mm

machine dimensions:
-length: 2834 mm
-width: 1742 mm
-height: 3460 mm
-height with autom. stroke adjustment: 3570 mm
-mass complete with 1 bbv 202: approx. 17.500 kg

dimensions of electrical cabinet:
-length: 1200 mm
-width: 500 mm
-height: 1025 mm
-mass: approx. 250 kg
tonnage meter toledo on board   BRUDERER BSTA 80H HIGH SPEED PRESS MADE IN SWITZERLAND PRODUCTION YEAR 1988 MACHINE IN FULL WORKING CONDITION, READY TO WORK. MAX. PRESSURE: 80 TONS 800 KN SPEED: -MAX.: 1000 1/MIN -MIN.: 100 1/MIN MAINS VOLTAGE (WITH PROTECTIVE CONDUCTOR): 220 V, 380 V, 440 V MAINS FREQUENCY: 50 HZ, 60 HZ POWER SUPPLY: 43 KW CONTROL VOLTAGE AC: 24 V COMPRESSED AIR CONNECTION: 6-10 BAR RAM POSITION ADJUSTMENT: 76 MM AVERAGE MASS OF TOOL UPPER PART: 600 KG BOLSTER AREA: -L-R: 950 MM -F-B: 910 MM RAM AREA: -L-R: 760 MM -F-B: 510 MM MAX. TOOL WIDTH CLEARANCE (L-R): 970 MM STRIP INLET HEIGHT: -MAX.: 160 MM -MIN.: 70 MM FEEDER BRUDERER ON LEFT SIDE BBV 202/120 MAX. STRIP INLET WIDTH: 202 MM STRIP FEED PITCH: 0-120 MM BED OPENING: -L-R: 920 MM -F-B: 320 MM MACHINE DIMENSIONS: -LENGTH: 2834 MM -WIDTH: 1742 MM -HEIGHT: 3460 MM -HEIGHT WITH AUTOM. STROKE ADJUSTMENT: 3570 MM -MASS COMPLETE WITH 1 BBV 202: APPROX. 17.500 KG DIMENSIONS OF ELECTRICAL CABINET: -LENGTH: 1200 MM -WIDTH: 500 MM -HEIGHT: 1025 MM -MASS: APPROX. 250 KG TONNAGE METER TOLEDO ON BOARD
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-<br>sheet thickness (mm) 100<br>roller width (mm) 100<br>number of rolls <br>roller diameter (mm) <br>
SHEET THICKNESS (MM) 100
ROLLER WIDTH (MM) 100
NUMBER OF ROLLS
ROLLER DIAMETER (MM)
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-punching machine
manufacturer: bruderer
type: bsta 60 v
year of construction: 1968

mounting area mm: 620 x 620
force of pressure: 60t
strokes/min (adjustable): 130-180
stroke adjustable in 10 levels by about 6 mm (20-76 mm)
working height mm: 80
incl. variator feeder-feed + sound insulation cabin
compliance with the accident prevention regulations
 PUNCHING MACHINE MANUFACTURER: BRUDERER TYPE: BSTA 60 V YEAR OF CONSTRUCTION: 1968 MOUNTING AREA MM: 620 X 620 FORCE OF PRESSURE: 60T STROKES/MIN (ADJUSTABLE): 130-180 STROKE ADJUSTABLE IN 10 LEVELS BY ABOUT 6 MM (20-76 MM) WORKING HEIGHT MM: 80 INCL. VARIATOR FEEDER-FEED + SOUND INSULATION CABIN COMPLIANCE WITH THE ACCIDENT PREVENTION REGULATIONS
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-<br>sheet thickness (mm) <br>roller width (mm) <br>number of rolls 19<br>roller diameter (mm) 18<br>
SHEET THICKNESS (MM)
ROLLER WIDTH (MM)
NUMBER OF ROLLS 19
ROLLER DIAMETER (MM) 18
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-force: 125 tons<br/>  windows: yes<br/>  daylight: 380mm<br/>  table: 1100x700mm<br/>  ram: 700x350mm<br/>  stroke: 01-120mm<br/>  strokes per minute: approx. 70<br/>  requested power: 22kw<br/>  weight: 8500kg<br/>  height: 2900mm FORCE: 125 TONS
WINDOWS: YES
DAYLIGHT: 380MM
TABLE: 1100X700MM
RAM: 700X350MM
STROKE: 01-120MM
STROKES PER MINUTE: APPROX. 70
REQUESTED POWER: 22KW
WEIGHT: 8500KG
HEIGHT: 2900MM
Vendedor: Köke Pressen
Año de construcción: usado
Ubicación: Land-<br>capacity (metric tons) 25<br>number of strokes per/min.  1500<br>day light (mm) 176 - 239<br>front distance between columns (mm) 540<br>
CAPACITY (METRIC TONS) 25
NUMBER OF STROKES PER/MIN. 1500
DAY LIGHT (MM) 176 - 239
FRONT DISTANCE BETWEEN COLUMNS (MM) 540
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-pressing plate of bruderer bsta 41 type
w x d x h = 660 x 550 x 95 mm
hole = 500 x 100 mm PRESSING PLATE OF BRUDERER BSTA 41 TYPE W X D X H = 660 X 550 X 95 MM HOLE = 500 X 100 MM
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-<br>sheet thickness (mm) 35 - 300<br>roller width (mm) 35 - 300<br>number of rolls <br>roller diameter (mm) <br>
SHEET THICKNESS (MM) 35 - 300
ROLLER WIDTH (MM) 35 - 300
NUMBER OF ROLLS
ROLLER DIAMETER (MM)
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-one used mitsui (bruderer) bsta60hl high speed press, 
original year of mfg 1986; refurbished 2017.
60 metric tons capacity, underdrive type.
adjustable stroke 20 - 76 mm.
speed range 100 to 750 strokes per minute max.
bolster area 760 mm x 620 mm 
max tool loading width 770 mm left to right.
front & rear operator safety guards fitted.
bbv 300/200 roll feed on left-hand side.
max width of strip 300 mm.
weight of press approx. 8200 kgs.
  ONE USED MITSUI (BRUDERER) BSTA60HL HIGH SPEED PRESS, ORIGINAL YEAR OF MFG 1986; REFURBISHED 2017. 60 METRIC TONS CAPACITY, UNDERDRIVE TYPE. ADJUSTABLE STROKE 20 - 76 MM. SPEED RANGE 100 TO 750 STROKES PER MINUTE MAX. BOLSTER AREA 760 MM X 620 MM MAX TOOL LOADING WIDTH 770 MM LEFT TO RIGHT. FRONT & REAR OPERATOR SAFETY GUARDS FITTED. BBV 300/200 ROLL FEED ON LEFT-HAND SIDE. MAX WIDTH OF STRIP 300 MM. WEIGHT OF PRESS APPROX. 8200 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-<br>capacity (metric tons) 25<br>number of strokes per/min.  1500<br>day light (mm) 176 - 239<br>front distance between columns (mm) 540<br>
CAPACITY (METRIC TONS) 25
NUMBER OF STROKES PER/MIN. 1500
DAY LIGHT (MM) 176 - 239
FRONT DISTANCE BETWEEN COLUMNS (MM) 540
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-one used bruderer bsta 41 high speed punch press.
original year of mfg 1980. swiss origin.
hydrostatic drive.
nominal capacity 40 tons.
adjustable stroke 13 - 57 mm.
speed range 100 to 1200 strokes per minute max.
bolster (tool clamping) area 670 mm x 550 mm.
max tool loading width 690 mm left to right.
fitted with bbv 202/120 roll feed on right-hand side.
max strip width 200 mm.
front and rear safety guards.
operators control cabinet freestanding.
power supply 400 volt, 50 hz.
weight of press approx. 6000 kgs.
  ONE USED BRUDERER BSTA 41 HIGH SPEED PUNCH PRESS. ORIGINAL YEAR OF MFG 1980. SWISS ORIGIN. HYDROSTATIC DRIVE. NOMINAL CAPACITY 40 TONS. ADJUSTABLE STROKE 13 - 57 MM. SPEED RANGE 100 TO 1200 STROKES PER MINUTE MAX. BOLSTER (TOOL CLAMPING) AREA 670 MM X 550 MM. MAX TOOL LOADING WIDTH 690 MM LEFT TO RIGHT. FITTED WITH BBV 202/120 ROLL FEED ON RIGHT-HAND SIDE. MAX STRIP WIDTH 200 MM. FRONT AND REAR SAFETY GUARDS. OPERATORS CONTROL CABINET FREESTANDING. POWER SUPPLY 400 VOLT, 50 HZ. WEIGHT OF PRESS APPROX. 6000 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-used bruderer bsta 60hsl high speed punch press,
year of mfg 1997. swiss origin.
siemens plc control.
60 tons capacity, underdrive type.
adjustable stroke 20 to 76 mm.
speed range 100 to 700 strokes per minute max.
bolster area 920 mm x 620 mm, max tool loading width 940 mm. 
fitted with roll feed bbv 202/120 on left-hand side.
max width of strip 200mm.
weight of press approx 8600 kgs.
     USED BRUDERER BSTA 60HSL HIGH SPEED PUNCH PRESS, YEAR OF MFG 1997. SWISS ORIGIN. SIEMENS PLC CONTROL. 60 TONS CAPACITY, UNDERDRIVE TYPE. ADJUSTABLE STROKE 20 TO 76 MM. SPEED RANGE 100 TO 700 STROKES PER MINUTE MAX. BOLSTER AREA 920 MM X 620 MM, MAX TOOL LOADING WIDTH 940 MM. FITTED WITH ROLL FEED BBV 202/120 ON LEFT-HAND SIDE. MAX WIDTH OF STRIP 200MM. WEIGHT OF PRESS APPROX 8600 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-used bruderer bbv 320/200 roll feed.
maximum strip width 400mm
maximum strip thickness 12mm
maximum feed 0 - 200mm
roller width 200mm
feeding angle 180°
weight approx. 1000kgs
suitable for bruderer bsta110 or bsta125 press.
 
no cardan shaft, guard or mounting plates included.
  USED BRUDERER BBV 320/200 ROLL FEED. MAXIMUM STRIP WIDTH 400MM MAXIMUM STRIP THICKNESS 12MM MAXIMUM FEED 0 - 200MM ROLLER WIDTH 200MM FEEDING ANGLE 180° WEIGHT APPROX. 1000KGS SUITABLE FOR BRUDERER BSTA110 OR BSTA125 PRESS. NO CARDAN SHAFT, GUARD OR MOUNTING PLATES INCLUDED.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-used ‘kohler’ motorized combination double-ended decoiler 
and precision strip straightener. year of mfg 1990.
model 18-120/19-1000-2m. 
levelling width: 120 mm
roll diameter: 18 mm
number of rolls: 19
area of cross section: 250 mm²
levelling direction: left-to-right
strip input: on the left
levelling speed: 0-60 mm/min
roll adjustment: motor
levelling machine drive: 4 kw; 3200 rpm
coil weight capacity 2x 1000 kgs.
oil pump motor: 0,06 kw; 1300 rpm
roll adjustment motor: 0,1/0,4 kw; 72/297 rpm
table length: 1450 mm
table width: 381 mm
strip radius: 350 mm
max. strip thickness: 1 mm
height of feed into press:
-max.: 1355 mm
-min.: 1265 mm
suitable for use with bruderer high speed punching press.  USED ‘KOHLER’ MOTORIZED COMBINATION DOUBLE-ENDED DECOILER AND PRECISION STRIP STRAIGHTENER. YEAR OF MFG 1990. MODEL 18-120/19-1000-2M. LEVELLING WIDTH: 120 MM ROLL DIAMETER: 18 MM NUMBER OF ROLLS: 19 AREA OF CROSS SECTION: 250 MM² LEVELLING DIRECTION: LEFT-TO-RIGHT STRIP INPUT: ON THE LEFT LEVELLING SPEED: 0-60 MM/MIN ROLL ADJUSTMENT: MOTOR LEVELLING MACHINE DRIVE: 4 KW; 3200 RPM COIL WEIGHT CAPACITY 2X 1000 KGS. OIL PUMP MOTOR: 0,06 KW; 1300 RPM ROLL ADJUSTMENT MOTOR: 0,1/0,4 KW; 72/297 RPM TABLE LENGTH: 1450 MM TABLE WIDTH: 381 MM STRIP RADIUS: 350 MM MAX. STRIP THICKNESS: 1 MM HEIGHT OF FEED INTO PRESS: -MAX.: 1355 MM -MIN.: 1265 MM SUITABLE FOR USE WITH BRUDERER HIGH SPEED PUNCHING PRESS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Precio: 14.500 €
Ubicación: Land-; ready for use ; READY FOR USE
Vendedor: Heri AG
Año de construcción: usado
Ubicación: Land-differential pressure press

force of pressure: 80 to.
number of strokes: max 95 stroke / min - infinitely variable
stroke adjustment: 3-100 mm
tappet adjustment: 100 mm
table size: 900 x 600 mm
tappet surface: 700 x 250 mm
maximum height: 350 mm
total power consumption: approx. 22 kw / 400 v
machine weight: 7000 kg

equipment / accessories:
sick photoelectric
two-hand - and foot operation
stanztronic presses control
stepless stroke number adjustment
documentation

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to visit the machine before purchasing power.
one ord. rchng. plus ges. vat will be issued.
 DIFFERENTIAL PRESSURE PRESS FORCE OF PRESSURE: 80 TO. NUMBER OF STROKES: MAX 95 STROKE / MIN - INFINITELY VARIABLE STROKE ADJUSTMENT: 3-100 MM TAPPET ADJUSTMENT: 100 MM TABLE SIZE: 900 X 600 MM TAPPET SURFACE: 700 X 250 MM MAXIMUM HEIGHT: 350 MM TOTAL POWER CONSUMPTION: APPROX. 22 KW / 400 V MACHINE WEIGHT: 7000 KG EQUIPMENT / ACCESSORIES: SICK PHOTOELECTRIC TWO-HAND - AND FOOT OPERATION STANZTRONIC PRESSES CONTROL STEPLESS STROKE NUMBER ADJUSTMENT DOCUMENTATION ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO VISIT THE MACHINE BEFORE PURCHASING POWER. ONE ORD. RCHNG. PLUS GES. VAT WILL BE ISSUED.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-force of pressure: max 80 to.
stroke rate: max 95 h/min (stepless)
stroke adjustment: 3-100 mm.
tappet adjustment: 100 mm.
table area: 900 x 600 mm.
tappet surface: 700 x 250 mm.
height: 350 mm.
stanztronic presses control
and complete documentation.
power: 22 kw.
weight: 7000 kg.
good ready condition.
the machine can be seen in consultation under power and is immediately available. FORCE OF PRESSURE: MAX 80 TO. STROKE RATE: MAX 95 H/MIN (STEPLESS) STROKE ADJUSTMENT: 3-100 MM. TAPPET ADJUSTMENT: 100 MM. TABLE AREA: 900 X 600 MM. TAPPET SURFACE: 700 X 250 MM. HEIGHT: 350 MM. STANZTRONIC PRESSES CONTROL AND COMPLETE DOCUMENTATION. POWER: 22 KW. WEIGHT: 7000 KG. GOOD READY CONDITION. THE MACHINE CAN BE SEEN IN CONSULTATION UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-max. pressure 400kn
speed: min 1/min 100; max:1/min 1650
mains supply: v 3x200; 400; 440
power supply: max 63kva
main motor driving power: 25kw
control voltage dc: 24

fixed stroke: mm 12,7; 15,9; 19,0; 25,4; 38,1;
adjustable stroke: mm 12,7/28,6; 15,9/25,4; 15,9/31,8; 19,0/28,6
ram adjustable area: mm 76

optimal weight of upper part of tool: 140kg
bolster area: mm 760
ram area: mm 630
max. tool widht clearance: mm 770
  MAX. PRESSURE 400KN SPEED: MIN 1/MIN 100; MAX:1/MIN 1650 MAINS SUPPLY: V 3X200; 400; 440 POWER SUPPLY: MAX 63KVA MAIN MOTOR DRIVING POWER: 25KW CONTROL VOLTAGE DC: 24 FIXED STROKE: MM 12,7; 15,9; 19,0; 25,4; 38,1; ADJUSTABLE STROKE: MM 12,7/28,6; 15,9/25,4; 15,9/31,8; 19,0/28,6 RAM ADJUSTABLE AREA: MM 76 OPTIMAL WEIGHT OF UPPER PART OF TOOL: 140KG BOLSTER AREA: MM 760 RAM AREA: MM 630 MAX. TOOL WIDHT CLEARANCE: MM 770
Vendedor: usedmachines
Año de construcción: usado
Ubicación: Land-stock ref #23588:
one used bruderer bsta 200-41b precision high speed punching press.
year of manufacture 2002. swiss origin.
electric drive and pc controls. 
choice of operators language, currently set to english.
20 tons nominal capacity (200 kn).
8 to 51 mm variable stroke.
speed range 100-1800 spm max.
bolster plate with standard tool loading width 410 mm.
bbv 190/85 roll feed on left-hand side.
max width of strip 160 mm.
max feed length variable up to 85 mm.
feed angle 180° 
power supply 380/400 volt, 50 hz.
weight of machine approx 3200 kgs.
oil cooler with pre-warming. spring feet dampers.
    STOCK REF #23588: ONE USED BRUDERER BSTA 200-41B PRECISION HIGH SPEED PUNCHING PRESS. YEAR OF MANUFACTURE 2002. SWISS ORIGIN. ELECTRIC DRIVE AND PC CONTROLS. CHOICE OF OPERATORS LANGUAGE, CURRENTLY SET TO ENGLISH. 20 TONS NOMINAL CAPACITY (200 KN). 8 TO 51 MM VARIABLE STROKE. SPEED RANGE 100-1800 SPM MAX. BOLSTER PLATE WITH STANDARD TOOL LOADING WIDTH 410 MM. BBV 190/85 ROLL FEED ON LEFT-HAND SIDE. MAX WIDTH OF STRIP 160 MM. MAX FEED LENGTH VARIABLE UP TO 85 MM. FEED ANGLE 180° POWER SUPPLY 380/400 VOLT, 50 HZ. WEIGHT OF MACHINE APPROX 3200 KGS. OIL COOLER WITH PRE-WARMING. SPRING FEET DAMPERS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-one used bruderer bsta 180u precision high speed punching press.
year of manufacture 1999. swiss origin.
electric drive with frequency inverter. plc controls. 
18 metric tons nominal capacity (180 kn)
8 to 40 mm variable stroke.
speed range 100-1400 spm max.
bolster area 480 x 374 mm.
max tool loading width 359 mm l-r.
bbv 190/85 roll feed mounted on right-hand side.
max width of strip 160 mm.
max feed length variable up to 85 mm max.
feed angle 180°.
end of strip monitoring electronic.
digital feed length display.
power supply 480 volt, 60 hz.
weight of machine approx 1850 kgs.
oil cooler. spring feet dampers.
safety guards/doors front and rear.
complete with acoustic enclosure
  ONE USED BRUDERER BSTA 180U PRECISION HIGH SPEED PUNCHING PRESS. YEAR OF MANUFACTURE 1999. SWISS ORIGIN. ELECTRIC DRIVE WITH FREQUENCY INVERTER. PLC CONTROLS. 18 METRIC TONS NOMINAL CAPACITY (180 KN) 8 TO 40 MM VARIABLE STROKE. SPEED RANGE 100-1400 SPM MAX. BOLSTER AREA 480 X 374 MM. MAX TOOL LOADING WIDTH 359 MM L-R. BBV 190/85 ROLL FEED MOUNTED ON RIGHT-HAND SIDE. MAX WIDTH OF STRIP 160 MM. MAX FEED LENGTH VARIABLE UP TO 85 MM MAX. FEED ANGLE 180°. END OF STRIP MONITORING ELECTRONIC. DIGITAL FEED LENGTH DISPLAY. POWER SUPPLY 480 VOLT, 60 HZ. WEIGHT OF MACHINE APPROX 1850 KGS. OIL COOLER. SPRING FEET DAMPERS. SAFETY GUARDS/DOORS FRONT AND REAR. COMPLETE WITH ACOUSTIC ENCLOSURE
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-one used bruderer bsta 20h high speed press.
year of manufacture 1982.
country of origin switzerland.
20 ton capacity.
adjustable stroke 8 to 38 mm.
speed range 100 to 1800 spm max.
tool clamping area 380 mm x 220 mm between pillars.
[total bolster area 560 x 400 mm.]
single roll feed bbv 190/85 fitted on the left-hand side.
max width of strip 160 mm.
power supply 380 volt, 50 hz, 3 phase.
    ONE USED BRUDERER BSTA 20H HIGH SPEED PRESS. YEAR OF MANUFACTURE 1982. COUNTRY OF ORIGIN SWITZERLAND. 20 TON CAPACITY. ADJUSTABLE STROKE 8 TO 38 MM. SPEED RANGE 100 TO 1800 SPM MAX. TOOL CLAMPING AREA 380 MM X 220 MM BETWEEN PILLARS. [TOTAL BOLSTER AREA 560 X 400 MM.] SINGLE ROLL FEED BBV 190/85 FITTED ON THE LEFT-HAND SIDE. MAX WIDTH OF STRIP 160 MM. POWER SUPPLY 380 VOLT, 50 HZ, 3 PHASE.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-article number: ma771
manufacturer: bruderer &amp;amp; leinhaas
type: dwp ar 09 63-80
year of construction: 1991
length [mm]: 1430
width [mm]: 1335
height [mm]: 3000
weight [kg]: 5570
power supply: 380 v
cutting force [to]: 80 ARTICLE NUMBER: MA771 MANUFACTURER: BRUDERER &AMP;AMP; LEINHAAS TYPE: DWP AR 09 63-80 YEAR OF CONSTRUCTION: 1991 LENGTH [MM]: 1430 WIDTH [MM]: 1335 HEIGHT [MM]: 3000 WEIGHT [KG]: 5570 POWER SUPPLY: 380 V CUTTING FORCE [TO]: 80
Vendedor: Ulrich Müller Maschinenhandel
Año de construcción: usado
Ubicación: Land-	
bruderer bsta 30
strokes per minute 600 spm,
feeder bbv
strip width max 190 mm max thickness 3.5 mm
stroke power 300 kn
central lubrication
shaft cooling

with new silicon control and new ce certificate

control brand new, all electrics, pneumatic, sealing and all wires and motor
metal parts chrome plated etc.


machine generally revised, in good condition.        BRUDERER BSTA 30 STROKES PER MINUTE 600 SPM, FEEDER BBV STRIP WIDTH MAX 190 MM MAX THICKNESS 3.5 MM STROKE POWER 300 KN CENTRAL LUBRICATION SHAFT COOLING WITH NEW SILICON CONTROL AND NEW CE CERTIFICATE CONTROL BRAND NEW, ALL ELECTRICS, PNEUMATIC, SEALING AND ALL WIRES AND MOTOR METAL PARTS CHROME PLATED ETC. MACHINE GENERALLY REVISED, IN GOOD CONDITION.
Vendedor: Silicon plus
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)