56 ofertas

Año de construcción: usado
Ubicación: Land-force: 5500 kn (550t)
closing speed: 885 mm / s
form width min / max: 300/850
distance between columns: 830x830 mm
post diameter: 150mm FORCE: 5500 KN (550T) CLOSING SPEED: 885 MM / S FORM WIDTH MIN / MAX: 300/850 DISTANCE BETWEEN COLUMNS: 830X830 MM POST DIAMETER: 150MM
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-make unknown, new unknown, floorspace 4,6x0,7 m, vertical conveyor screw (1x), tube-model , material stainless steel , diameter ± 240mm, length 3400mm, inlet dia. 150mm, outlet ± dia. 250mm, motor 4,0 kw, 220-240/380-415 volt, screw speed ± 114 rpmvertical conveyor screwsconveyor screws > vertical conveyor screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, NEW UNKNOWN, FLOORSPACE 4,6X0,7 M, VERTICAL CONVEYOR SCREW (1X), TUBE-MODEL , MATERIAL STAINLESS STEEL , DIAMETER ± 240MM, LENGTH 3400MM, INLET DIA. 150MM, OUTLET ± DIA. 250MM, MOTOR 4,0 KW, 220-240/380-415 VOLT, SCREW SPEED ± 114 RPMVERTICAL CONVEYOR SCREWSCONVEYOR SCREWS > VERTICAL CONVEYOR SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMAÃ?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: Â?¬225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: · LENGTH OF THE STREETS: CA 51M · HEIGHT OF THE SHELVES: CA 9, 3 M · SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: § NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS § DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM § SEKTORIERUNG OF THE SHELVES POSSIBLE · CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS · NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / · SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-make jongerius (screw), type e-102, new 1993, horizontal conveyor screw , material stainless steel , length (total) 2700mm, pitch 120mm, with hopper , inlet (2x) dia.200mm, outlet dia.150mm, motor 2.2 kw, 220/380volt (15-76rpm), outlet height 1000mm, with covers , mounted on frame , floorspace 3,6x1,9m, total height 3,5 m, weight 1300 kghorizontal conveyor screwsconveyor screws > horizontal conveyor screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE JONGERIUS (SCREW), TYPE E-102, NEW 1993, HORIZONTAL CONVEYOR SCREW , MATERIAL STAINLESS STEEL , LENGTH (TOTAL) 2700MM, PITCH 120MM, WITH HOPPER , INLET (2X) DIA.200MM, OUTLET DIA.150MM, MOTOR 2.2 KW, 220/380VOLT (15-76RPM), OUTLET HEIGHT 1000MM, WITH COVERS , MOUNTED ON FRAME , FLOORSPACE 3,6X1,9M, TOTAL HEIGHT 3,5 M, WEIGHT 1300 KGHORIZONTAL CONVEYOR SCREWSCONVEYOR SCREWS > HORIZONTAL CONVEYOR SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 75 €
Ubicación: Land-approximately 75-80 st. heson tank 1000 x 800mm - gebraucht-:
 
price / piece from location: 75.-â?¬ (net)
 
manufacturer: unknown
type: henson, special container 36071
transport tray type 21145-00-0
size: 1000 x 800mm
stack height: 620 mm
filling height: 500 mm
vertical clearance: 120 mm
entry level mid mid foot: 700 mm
running-in level cross: 600 mm
clearance: 150mm
wall thickness: 2 mm
panel thickness: 3 mm
base thickness: 4 mm
bottom middle center with a series of water drain holes
available: available now
condition: used, approx. 1/3: 1 + 2 medium quality, poor quality of 3 + 4, 5 + 6 good quality
location: fulda APPROXIMATELY 75-80 ST. HESON TANK 1000 X 800MM - GEBRAUCHT-: PRICE / PIECE FROM LOCATION: 75.-Â?¬ (NET) MANUFACTURER: UNKNOWN TYPE: HENSON, SPECIAL CONTAINER 36071 TRANSPORT TRAY TYPE 21145-00-0 SIZE: 1000 X 800MM STACK HEIGHT: 620 MM FILLING HEIGHT: 500 MM VERTICAL CLEARANCE: 120 MM ENTRY LEVEL MID MID FOOT: 700 MM RUNNING-IN LEVEL CROSS: 600 MM CLEARANCE: 150MM WALL THICKNESS: 2 MM PANEL THICKNESS: 3 MM BASE THICKNESS: 4 MM BOTTOM MIDDLE CENTER WITH A SERIES OF WATER DRAIN HOLES AVAILABLE: AVAILABLE NOW CONDITION: USED, APPROX. 1/3: 1 + 2 MEDIUM QUALITY, POOR QUALITY OF 3 + 4, 5 + 6 GOOD QUALITY LOCATION: FULDA
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine pro s100m<br><br>vertical packaging machine, mitsubishi plc, weinview touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. <br><br>- specifications: bag size: l(50-230)xw(60-190)mm (single pulling) | max. speed of the machine in neutral: 100 cycles/minute | stainless steel | 220v/3.5kw | 6bar, 0,20m³/min | l1300xw960xh1150mm | weight: 500/600kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE PRO S100M

VERTICAL PACKAGING MACHINE, MITSUBISHI PLC, WEINVIEW TOUCH SCREEN OPERATOR INTERFACE, AUTOMATIC PROGRAM SET-UP, MARK SENSOR REGISTRATION CONTROL, QUICK CHANGE FORMER ASSEMBLY, SERVO MOTOR SEALING UNIT, SERVO MOTOR FILM PULLING, DOUBLE PULLING POSSIBLE.

- SPECIFICATIONS: BAG SIZE: L(50-230)XW(60-190)MM (SINGLE PULLING) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 100 CYCLES/MINUTE | STAINLESS STEEL | 220V/3.5KW | 6BAR, 0,20M³/MIN | L1300XW960XH1150MM | WEIGHT: 500/600KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 45.000 €
Ubicación: Land-cap. 1250 kn. bed 1240 x 900mm. max. daylight 500 + 130mm. distance between columns 1270mm. hole in table 300 x 150mm. stroke 100 mm,, stroke adjustment 200mm, speed 35-200 spm. with: decoiler schleicher, type h-p4000-02-780, yom 1980. ser,-no 2642/24, cap. 3 ton, strip width 80 - 300mm, thickness 0,8-4mm. straightener schleicher type rm6-70/160, yom 1980, ser.-no 2641/1/04/20, strip width max. 300mm, thickness 0,8-4mm, feeder manufacture pbk, type ev-120/600, ser.no. ba00466.
de:
stanzautomat (3101), best. aus: abrollhaspel, fabr. schleicher, typ h-p4000-02-780, bj. 1980, auftragsnr. 8191, belastung max. 3 t, bandbreite 80 - 300 mm, banddicke 0,8 - 4 mm, fertigungsnr. 2642/24, blechrichtmaschine, fabr. schleicher, typ rm6-70/160, bj. 1980, fertigungsnr. 2641/1/04/20, auftragsnr. 8191, bandbreite max. 300 mm, banddicke 0,8 - 4 mm, bandeinzug, fabr. pbk, typ ev-120/600, bj. 1998, auftragsnr. ba00466, exzenterstanze, fabr. kaiser, typ kstu1250, bj. ca. 1972, maschinengewicht 24.000 kg, nennpresskraft 1.250 kn, tischabm. 1.240 x 900 mm, einbauhöhe bei größtem hub 500 + 130 mm, durchgang zwischen den ständern 1.270 mm, durchgang in tisch 300 x 150 mm, hub 100 hübe/min, stößelverstellbarkeit 200 mm, hubzahl stufenlos 35 - 200 h
  CAP. 1250 KN. BED 1240 X 900MM. MAX. DAYLIGHT 500 + 130MM. DISTANCE BETWEEN COLUMNS 1270MM. HOLE IN TABLE 300 X 150MM. STROKE 100 MM,, STROKE ADJUSTMENT 200MM, SPEED 35-200 SPM. WITH: DECOILER SCHLEICHER, TYPE H-P4000-02-780, YOM 1980. SER,-NO 2642/24, CAP. 3 TON, STRIP WIDTH 80 - 300MM, THICKNESS 0,8-4MM. STRAIGHTENER SCHLEICHER TYPE RM6-70/160, YOM 1980, SER.-NO 2641/1/04/20, STRIP WIDTH MAX. 300MM, THICKNESS 0,8-4MM, FEEDER MANUFACTURE PBK, TYPE EV-120/600, SER.NO. BA00466. DE: STANZAUTOMAT (3101), BEST. AUS: ABROLLHASPEL, FABR. SCHLEICHER, TYP H-P4000-02-780, BJ. 1980, AUFTRAGSNR. 8191, BELASTUNG MAX. 3 T, BANDBREITE 80 - 300 MM, BANDDICKE 0,8 - 4 MM, FERTIGUNGSNR. 2642/24, BLECHRICHTMASCHINE, FABR. SCHLEICHER, TYP RM6-70/160, BJ. 1980, FERTIGUNGSNR. 2641/1/04/20, AUFTRAGSNR. 8191, BANDBREITE MAX. 300 MM, BANDDICKE 0,8 - 4 MM, BANDEINZUG, FABR. PBK, TYP EV-120/600, BJ. 1998, AUFTRAGSNR. BA00466, EXZENTERSTANZE, FABR. KAISER, TYP KSTU1250, BJ. CA. 1972, MASCHINENGEWICHT 24.000 KG, NENNPRESSKRAFT 1.250 KN, TISCHABM. 1.240 X 900 MM, EINBAUHöHE BEI GRößTEM HUB 500 + 130 MM, DURCHGANG ZWISCHEN DEN STäNDERN 1.270 MM, DURCHGANG IN TISCH 300 X 150 MM, HUB 100 HüBE/MIN, STößELVERSTELLBARKEIT 200 MM, HUBZAHL STUFENLOS 35 - 200 H
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-amtec fillingsystem - sample system for a complete rinsing, filling, capping line (low viscosity)<br><br>sample filling system for low viscosity products (ketchup, jam, sauces, etc.) into bottles, glasses, cans. including container unscrambler, rolling bottle/container rinser, viscosity filler (hot filling, steam filling), vacuumize jar capper. <br><br>- specifications: filling volume 20-1000ml | bottle size range: diameter 20-150mm, cap diameter: 20-70mm | 4-12 filling nozzles allowing speed s of up to 6000 bottles/containers per hour | tolerance of filling quantity: +/- 1% | yield of capping: less than 99% | 380v, 3.5kw, 0.6m³, 6bar. - please note: these are specifications for a sample system only. the final specifications will vary. please give us your packaging details (container size, shape, filling product, required speed , etc.) to prepare a full quotation for you.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGSYSTEM - SAMPLE SYSTEM FOR A COMPLETE RINSING, FILLING, CAPPING LINE (LOW VISCOSITY)

SAMPLE FILLING SYSTEM FOR LOW VISCOSITY PRODUCTS (KETCHUP, JAM, SAUCES, ETC.) INTO BOTTLES, GLASSES, CANS. INCLUDING CONTAINER UNSCRAMBLER, ROLLING BOTTLE/CONTAINER RINSER, VISCOSITY FILLER (HOT FILLING, STEAM FILLING), VACUUMIZE JAR CAPPER.

- SPECIFICATIONS: FILLING VOLUME 20-1000ML | BOTTLE SIZE RANGE: DIAMETER 20-150MM, CAP DIAMETER: 20-70MM | 4-12 FILLING NOZZLES ALLOWING SPEED S OF UP TO 6000 BOTTLES/CONTAINERS PER HOUR | TOLERANCE OF FILLING QUANTITY: +/- 1% | YIELD OF CAPPING: LESS THAN 99% | 380V, 3.5KW, 0.6M³, 6BAR. - PLEASE NOTE: THESE ARE SPECIFICATIONS FOR A SAMPLE SYSTEM ONLY. THE FINAL SPECIFICATIONS WILL VARY. PLEASE GIVE US YOUR PACKAGING DETAILS (CONTAINER SIZE, SHAPE, FILLING PRODUCT, REQUIRED SPEED , ETC.) TO PREPARE A FULL QUOTATION FOR YOU.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-schließkraft: 750kn, einspritzdruck: 2350bar, schneckendurchmesser: 30mm, max. Öffnungsweg: 550/ 350mm, auswurfhub: 150mm, weight: 3.5t.  SCHLIEßKRAFT: 750KN, EINSPRITZDRUCK: 2350BAR, SCHNECKENDURCHMESSER: 30MM, MAX. ÖFFNUNGSWEG: 550/ 350MM, AUSWURFHUB: 150MM, WEIGHT: 3.5T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xxxl<br><br>high speed automatic side sealing machine for shrinkwrapping packaging. - ideal to be combined with amtec shrinktunnel-pof-xxxl (high speed ). suitable for fully automated inline production. automatic and manual infeed possible. color touchscreen operation, quick format change, servo motor control for accurate position and perfect seal line. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. product dimensions: unlimited length, w+h max. 700mm, height max. 150mm | power: 220v, 3.4kw | compressed air: 6bar, 0.1m³/min | machine dimensions: l2350xw1760xh1320mm | weight: 1000kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XXXL

HIGH SPEED AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. - IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL-POF-XXXL (HIGH SPEED ). SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE. COLOR TOUCHSCREEN OPERATION, QUICK FORMAT CHANGE, SERVO MOTOR CONTROL FOR ACCURATE POSITION AND PERFECT SEAL LINE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 700MM, HEIGHT MAX. 150MM | POWER: 220V, 3.4KW | COMPRESSED AIR: 6BAR, 0.1M³/MIN | MACHINE DIMENSIONS: L2350XW1760XH1320MM | WEIGHT: 1000KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 100 €
Ubicación: Land-we bought long stocks 383 pcs. fluorescent tubes from a stock of spare parts, new, which we offer here:
black light, uv fluorescent tubes, cold white, ex protected fluorescent tubes, tanning lamps, studio lamps, fly fishing lamps, etc.

the lights are in the retail package!

on a photo you will find 18 types and their prices. we have determined the lowest market price.
want to buy a position we will give you - 40% on the market price.
would you buy the complete packet we will give you - 60% on the market price, that are € 1076.
minimum sales amount € 100
 
1) 32 pcs. fluorescent black light, f15t12/350bl/500/ph, d38x380mm, sylvania
2) 20 pcs. uv fluorescent lamps with shatter protection f20w / 350bl, d38x590mm, sylvania
3) 20 fluorescent tube, tlk 40w/05, d38x590mm, philips
4) 25 pcs. cool white fluorescent lamp tl-d 18w 840 super 80 master d28x590mm, philips
5) 25 pcs. black light fluorescent, sylvania, f15w/t8/bl, d26x450mm
6) 28 pcs. cool white fluorescent lamp, master tl-d 36w / 840 / 2 l, d28x1200mm, philips
7) 32 pcs. fluorescent lamp tl-m40w/83rs, d38x1200mm, philips
8) 43 pcs. fluorescent lamp, tl40w-33, d38x1200mm, philips
9) 7 pcs. ex-protected cool white fluorescent lamp, l40w/640 xl, d38x1200mm, osram
10) 23 pcs. solarium lamp, studio light, professional 100w-r, d38x1760mm, philips
11) 29 stk. solarium tubes turbo power plus r 160 watts, d38x1760mm, soltron
12) 14 pcs. cool white fluorescent lamp, lumilux l30w/21-840, d26x790mm, osram
13) 25 pcs. daylight-white fluorescent lamp, lumilux de luxe, l36w/954-1, d26x1200mm, osram
14) 30 pcs. cool white fluorescent lamp, lumilux fh28w/840, d16x1150mm, osram
15) 9 pcs. cool white fluorescent lamp, lumilux l36w / 21 x, d26x1200mm, osram
16) 9 ex protected long life lights, super ex 58w-4100, d26x1480, ceag
18) 5 pcs. tld fly fishing lamp 15w/05, d28x437mm, philips
(19) 7 pcs. fluorescent green, tl-d 18w/17, d27x590mm, philips

  WE BOUGHT LONG STOCKS 383 PCS. FLUORESCENT TUBES FROM A STOCK OF SPARE PARTS, NEW, WHICH WE OFFER HERE: BLACK LIGHT, UV FLUORESCENT TUBES, COLD WHITE, EX PROTECTED FLUORESCENT TUBES, TANNING LAMPS, STUDIO LAMPS, FLY FISHING LAMPS, ETC. THE LIGHTS ARE IN THE RETAIL PACKAGE! ON A PHOTO YOU WILL FIND 18 TYPES AND THEIR PRICES. WE HAVE DETERMINED THE LOWEST MARKET PRICE. WANT TO BUY A POSITION WE WILL GIVE YOU - 40% ON THE MARKET PRICE. WOULD YOU BUY THE COMPLETE PACKET WE WILL GIVE YOU - 60% ON THE MARKET PRICE, THAT ARE € 1076. MINIMUM SALES AMOUNT € 100 1) 32 PCS. FLUORESCENT BLACK LIGHT, F15T12/350BL/500/PH, D38X380MM, SYLVANIA 2) 20 PCS. UV FLUORESCENT LAMPS WITH SHATTER PROTECTION F20W / 350BL, D38X590MM, SYLVANIA 3) 20 FLUORESCENT TUBE, TLK 40W/05, D38X590MM, PHILIPS 4) 25 PCS. COOL WHITE FLUORESCENT LAMP TL-D 18W 840 SUPER 80 MASTER D28X590MM, PHILIPS 5) 25 PCS. BLACK LIGHT FLUORESCENT, SYLVANIA, F15W/T8/BL, D26X450MM 6) 28 PCS. COOL WHITE FLUORESCENT LAMP, MASTER TL-D 36W / 840 / 2 L, D28X1200MM, PHILIPS 7) 32 PCS. FLUORESCENT LAMP TL-M40W/83RS, D38X1200MM, PHILIPS 8) 43 PCS. FLUORESCENT LAMP, TL40W-33, D38X1200MM, PHILIPS 9) 7 PCS. EX-PROTECTED COOL WHITE FLUORESCENT LAMP, L40W/640 XL, D38X1200MM, OSRAM 10) 23 PCS. SOLARIUM LAMP, STUDIO LIGHT, PROFESSIONAL 100W-R, D38X1760MM, PHILIPS 11) 29 STK. SOLARIUM TUBES TURBO POWER PLUS R 160 WATTS, D38X1760MM, SOLTRON 12) 14 PCS. COOL WHITE FLUORESCENT LAMP, LUMILUX L30W/21-840, D26X790MM, OSRAM 13) 25 PCS. DAYLIGHT-WHITE FLUORESCENT LAMP, LUMILUX DE LUXE, L36W/954-1, D26X1200MM, OSRAM 14) 30 PCS. COOL WHITE FLUORESCENT LAMP, LUMILUX FH28W/840, D16X1150MM, OSRAM 15) 9 PCS. COOL WHITE FLUORESCENT LAMP, LUMILUX L36W / 21 X, D26X1200MM, OSRAM 16) 9 EX PROTECTED LONG LIFE LIGHTS, SUPER EX 58W-4100, D26X1480, CEAG 18) 5 PCS. TLD FLY FISHING LAMP 15W/05, D28X437MM, PHILIPS (19) 7 PCS. FLUORESCENT GREEN, TL-D 18W/17, D27X590MM, PHILIPS
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xl<br><br>high speed automatic side sealing machine for shrinkwrapping packaging. ideal to be combined with amtec shrinktunnel-pof-xl (high speed ). suitable for fully automated inline production. automatic and manual infeed possible. color touchscreen operation, quick format change, servo motor control for accurate position and perfect seal line. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. product dimensions: unlimited length, w+h max. 400mm, height max. 150mm | power: 220v, 3.0kw | compressed air: 6bar, 0,1m³/min | machine dimensions: l2040xw1480xh1300mm | weight: 800kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XL

HIGH SPEED AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL-POF-XL (HIGH SPEED ). SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE. COLOR TOUCHSCREEN OPERATION, QUICK FORMAT CHANGE, SERVO MOTOR CONTROL FOR ACCURATE POSITION AND PERFECT SEAL LINE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 400MM, HEIGHT MAX. 150MM | POWER: 220V, 3.0KW | COMPRESSED AIR: 6BAR, 0,1M³/MIN | MACHINE DIMENSIONS: L2040XW1480XH1300MM | WEIGHT: 800KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

number of printing units2 
max paper size520 x 365mm 
min paper size100 x 150mm 
max printing area505 x 350mm 
stock range0.04 - 0.4mm 
dampening systemmolleton 
speed11,000sph 
weight2,200 kg 
the ryobi 512 is a two colour sra3 landscape press with a speed of 11000 sheets per hour and molleton dampening. 
the machine has also been referred to in the uk as a ryobi 512e. 
good condition 
available immediately  WE ARE PLEASED TO OFFER: NUMBER OF PRINTING UNITS2 MAX PAPER SIZE520 X 365MM MIN PAPER SIZE100 X 150MM MAX PRINTING AREA505 X 350MM STOCK RANGE0.04 - 0.4MM DAMPENING SYSTEMMOLLETON SPEED11,000SPH WEIGHT2,200 KG THE RYOBI 512 IS A TWO COLOUR SRA3 LANDSCAPE PRESS WITH A SPEED OF 11000 SHEETS PER HOUR AND MOLLETON DAMPENING. THE MACHINE HAS ALSO BEEN REFERRED TO IN THE UK AS A RYOBI 512E. GOOD CONDITION AVAILABLE IMMEDIATELY
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xxl<br><br>high speed automatic side sealing machine for shrinkwrapping packaging. - ideal to be combined with amtec shrinktunnel-pof-xxl (high speed ). suitable for fully automated inline production. automatic and manual infeed possible. color touchscreen operation, quick format change, servo motor control for accurate position and perfect seal line. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. product dimensions: unlimited length, w+h max. 600mm, height max. 150mm | power: 220v, 3.2kw | compressed air: 6bar, 0,1m³/min | machine dimensions: l2260xw1600xh1300mm | weight: 900kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XXL

HIGH SPEED AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. - IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL-POF-XXL (HIGH SPEED ). SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE. COLOR TOUCHSCREEN OPERATION, QUICK FORMAT CHANGE, SERVO MOTOR CONTROL FOR ACCURATE POSITION AND PERFECT SEAL LINE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 600MM, HEIGHT MAX. 150MM | POWER: 220V, 3.2KW | COMPRESSED AIR: 6BAR, 0,1M³/MIN | MACHINE DIMENSIONS: L2260XW1600XH1300MM | WEIGHT: 900KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-microtec multi sensor scanner goldeneye-501

pre-owned microtec multi sensor scanner goldeneye-501 manufacturer: microtec type: goldeneye 501 year: 2011 condition: good, (used) commissioned description microtec multi sensor 501 goldeneye multisensor scanner for determining the quality of sawn timber in the inline transport scope: capping wood: spruce, pine length of the slat: 2000 mm - 6000 mm width of lamella: 45 mm - 190 mm thickness of the plate: 18 mm - 80 mm wood surface: rough (circular saw cut, clean surface) wood moisture: 8% - 18% wood temperature: up  to + 40 â° c maximum feed speed goldeneye: from 80 m / min. up to 150 m / min (depending on the cross-section) board gap in the scanner: á?³150mm ambient temperature: + 5 â° c up to + 35 â° c maximum relative humidity: á?¸80% rel. hum.	

system configuration: 3d laser image (4-sided) line laser (4-sided) point laser (4-sided) color image (4-sided) upgrade x-ray part recording of x-ray images with a resolution of 1, 0 mm x 2.2 mm 150 m / min feed cameras: digital c-mos ethernet high-performance came eras lighting: led lighting, laser the following functions are included: recording the error zones detected by the sensors plausibility control cutting optimization taking into account areas and quality-related error dimensions of 4 different qualities pass of the cutting lists on automatic (previously dimter 350 and 450) production statistics standard microtec software windows xp user interface three-dimensional illustration of the entire board graphic real time visualization of recognized detection of knots, cracks, bark inclusion, resin gall, pith, forest edge, damage to edges, blue, tan, parent - under proportionality to optimize computer board error transmission of measured data and the data of the errors of the board width, monitoring under proportionality strength compact and modaleres qualitã¤tsscanner system for wooden components aluminium/steel housing internal optoelectronics, sensors, cameras, laser, etc., are protected by custom-designed case against environmental influences. MICROTEC MULTI SENSOR SCANNER GOLDENEYE-501 PRE-OWNED MICROTEC MULTI SENSOR SCANNER GOLDENEYE-501 MANUFACTURER: MICROTEC TYPE: GOLDENEYE 501 YEAR: 2011 CONDITION: GOOD, (USED) COMMISSIONED DESCRIPTION MICROTEC MULTI SENSOR 501 GOLDENEYE MULTISENSOR SCANNER FOR DETERMINING THE QUALITY OF SAWN TIMBER IN THE INLINE TRANSPORT SCOPE: CAPPING WOOD: SPRUCE, PINE LENGTH OF THE SLAT: 2000 MM - 6000 MM WIDTH OF LAMELLA: 45 MM - 190 MM THICKNESS OF THE PLATE: 18 MM - 80 MM WOOD SURFACE: ROUGH (CIRCULAR SAW CUT, CLEAN SURFACE) WOOD MOISTURE: 8% - 18% WOOD TEMPERATURE: UP TO + 40 &ACIRC;&DEG; C MAXIMUM FEED SPEED GOLDENEYE: FROM 80 M / MIN. UP TO 150 M / MIN (DEPENDING ON THE CROSS-SECTION) BOARD GAP IN THE SCANNER: &AACUTE;?&SUP3;150MM AMBIENT TEMPERATURE: + 5 &ACIRC;&DEG; C UP TO + 35 &ACIRC;&DEG; C MAXIMUM RELATIVE HUMIDITY: &AACUTE;?&CEDIL;80% REL. HUM. SYSTEM CONFIGURATION: 3D LASER IMAGE (4-SIDED) LINE LASER (4-SIDED) POINT LASER (4-SIDED) COLOR IMAGE (4-SIDED) UPGRADE X-RAY PART RECORDING OF X-RAY IMAGES WITH A RESOLUTION OF 1, 0 MM X 2.2 MM 150 M / MIN FEED CAMERAS: DIGITAL C-MOS ETHERNET HIGH-PERFORMANCE CAME ERAS LIGHTING: LED LIGHTING, LASER THE FOLLOWING FUNCTIONS ARE INCLUDED: RECORDING THE ERROR ZONES DETECTED BY THE SENSORS PLAUSIBILITY CONTROL CUTTING OPTIMIZATION TAKING INTO ACCOUNT AREAS AND QUALITY-RELATED ERROR DIMENSIONS OF 4 DIFFERENT QUALITIES PASS OF THE CUTTING LISTS ON AUTOMATIC (PREVIOUSLY DIMTER 350 AND 450) PRODUCTION STATISTICS STANDARD MICROTEC SOFTWARE WINDOWS XP USER INTERFACE THREE-DIMENSIONAL ILLUSTRATION OF THE ENTIRE BOARD GRAPHIC REAL TIME VISUALIZATION OF RECOGNIZED DETECTION OF KNOTS, CRACKS, BARK INCLUSION, RESIN GALL, PITH, FOREST EDGE, DAMAGE TO EDGES, BLUE, TAN, PARENT - UNDER PROPORTIONALITY TO OPTIMIZE COMPUTER BOARD ERROR TRANSMISSION OF MEASURED DATA AND THE DATA OF THE ERRORS OF THE BOARD WIDTH, MONITORING UNDER PROPORTIONALITY STRENGTH COMPACT AND MODALERES QUALIT&ATILDE;&CURREN;TSSCANNER SYSTEM FOR WOODEN COMPONENTS ALUMINIUM/STEEL HOUSING INTERNAL OPTOELECTRONICS, SENSORS, CAMERAS, LASER, ETC., ARE PROTECTED BY CUSTOM-DESIGNED CASE AGAINST ENVIRONMENTAL INFLUENCES.
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w35-xl<br><br>automatic side sealing machine for shrinkwrapping packaging. ideal to be combined with shrinktunnel-pof-l. suitable for fully automated inline production. automatic and manual infeed possible. <br><br>- specifications: max. speed of the machine in neutral: 35 cycles/minute | max. product dimensions: unlimited length, 300mm width, 150mm height | weight (net/gross): 400/500kg | power: 220v, 2kw | air: 5.5 bar/0.1m³/min | l1680xw960xh1500mm.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W35-XL

AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. IDEAL TO BE COMBINED WITH SHRINKTUNNEL-POF-L. SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 35 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, 300MM WIDTH, 150MM HEIGHT | WEIGHT (NET/GROSS): 400/500KG | POWER: 220V, 2KW | AIR: 5.5 BAR/0.1M³/MIN | L1680XW960XH1500MM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer, 

irs 330 
the irs stand-alone converting machine is equipped for the 
production of label stacks in various materials like iml, paper, 
carton, film etc. from a pre-printed reel. next, to that the irs is 
designed to produce small reels from a pre-printed mother reel by 
means of longitudinal cutting of self-adhesives, foil- and paper 
materials. 
thanks to the servo driven die-cutting station and a special control 
system the machine is able to provide an in register die cut 
production 
irs330 machine with a die-cutting unit and non-stop 
stacker 
technical data 
maximum web width: 330 mm 
maximum mechanical speed for irs330: up to 200 
(used as rewinding machine - without stacker unit): m/min 
maximum mechanical speed during in-register dies cutting process for stable materials: 100/min 
maximum unwind diameter: 750 mm 
electric power supply: 3x400v 
compressed air (dry, without oil) 6 bar m3/h 
machine dimension 
length: 4360 
width: 1580 

pneumatic unwind spindle, cantilever type 76 mm 
de-curl-bar-unit with roller 
web guide bst splice table with 2 pneumatic clamps 
matrix rewind spindle is driven by a servo drive 
maximum rewind diameter-matrix 500 mm 
rewind spindle-diameter 76 mm 
flag detector czujnik flag 
crus cut unit with 2 razor blades 
pneumatic nip roller device 
matrix nip roller unit 
dancer roller for tension matrix 
material support plate equipped with anti-static bars (total in the machine 3 pcs) 

die cutting station (including matrix rewinder) 
330 mm 96 t-192t 
maximum working width of a magnetic cylinder (flexor type) 330 mm 96 t-192t 

die-cutting cylinder driven by a servo drive 
modified pressure bridge allowing to lift the magnetic die cylinder without hoist to mount the magnetic die plate. 

control system for off-line in register die cutting 
do 100 m/min 
maximum machine speed during in-register die-cutting 
process for stable materials 100 m/min 

hydraulic pressure read out - 2 clocks 

vacuum belt 

control panel on movable arm equipped with: 
micro-processor control system 
electronic counter (labels/meters) 
precise adjustment of rewind and unwind web tension 
electronic correction of web tension on unwind 
automatic stop at roll end 

rewind unit equipped with	
1 pneumatic rewind spindle r (servo driven) 76 mm 
maximum rewind diameter /440 mm 
lay on roller 
simple change of winding direction 
simple change of spindle diameter 

2 rewind shaft with pneumatic spindle diameter 
serwo driven 76mm 
maximum rewind diameter (for 2 spindles) 310mm 
simple change of winding direction 
simple change of spindle diameter 

counting photo cell 
non-stop stacker unit 
to produce automatically ready stacks with a max. height of 
150mm. the ready stacks are delivered by means of a 
pushing system. 
the restriction is a min. label size of 7cm. 
for smaller labels, 3,5cm – 7cm, the stack has to be taken 
out by the 45° pins manually. 
max. label size depending on working width of magnetic 
cylinder. 
stack unit for 4 streams (max) 

delivery conveyor stacker non -stop see the drawing 
delivery conveyor table, including vacuum-belt (12) and 
vacuum-pump (max. 4 streams across) 

conveyor motor 
stop wheels 
vacuum motor 
separation o-belts 
stack table motor 
automatic out-feed pusher 
stack table 
joggers 
transport belts 
collection table for take off –the stacks 
shear cutting unit with 3 knives 
control panel for stacker panel 
antistatic bars (total in the machine 3 pcs) 
power unit for antistatic bars 
machine is in production 
located in england   WE ARE PLEASED TO OFFER, IRS 330 THE IRS STAND-ALONE CONVERTING MACHINE IS EQUIPPED FOR THE PRODUCTION OF LABEL STACKS IN VARIOUS MATERIALS LIKE IML, PAPER, CARTON, FILM ETC. FROM A PRE-PRINTED REEL. NEXT, TO THAT THE IRS IS DESIGNED TO PRODUCE SMALL REELS FROM A PRE-PRINTED MOTHER REEL BY MEANS OF LONGITUDINAL CUTTING OF SELF-ADHESIVES, FOIL- AND PAPER MATERIALS. THANKS TO THE SERVO DRIVEN DIE-CUTTING STATION AND A SPECIAL CONTROL SYSTEM THE MACHINE IS ABLE TO PROVIDE AN IN REGISTER DIE CUT PRODUCTION IRS330 MACHINE WITH A DIE-CUTTING UNIT AND NON-STOP STACKER TECHNICAL DATA MAXIMUM WEB WIDTH: 330 MM MAXIMUM MECHANICAL SPEED FOR IRS330: UP TO 200 (USED AS REWINDING MACHINE - WITHOUT STACKER UNIT): M/MIN MAXIMUM MECHANICAL SPEED DURING IN-REGISTER DIES CUTTING PROCESS FOR STABLE MATERIALS: 100/MIN MAXIMUM UNWIND DIAMETER: 750 MM ELECTRIC POWER SUPPLY: 3X400V COMPRESSED AIR (DRY, WITHOUT OIL) 6 BAR M3/H MACHINE DIMENSION LENGTH: 4360 WIDTH: 1580 PNEUMATIC UNWIND SPINDLE, CANTILEVER TYPE 76 MM DE-CURL-BAR-UNIT WITH ROLLER WEB GUIDE BST SPLICE TABLE WITH 2 PNEUMATIC CLAMPS MATRIX REWIND SPINDLE IS DRIVEN BY A SERVO DRIVE MAXIMUM REWIND DIAMETER-MATRIX 500 MM REWIND SPINDLE-DIAMETER 76 MM FLAG DETECTOR CZUJNIK FLAG CRUS CUT UNIT WITH 2 RAZOR BLADES PNEUMATIC NIP ROLLER DEVICE MATRIX NIP ROLLER UNIT DANCER ROLLER FOR TENSION MATRIX MATERIAL SUPPORT PLATE EQUIPPED WITH ANTI-STATIC BARS (TOTAL IN THE MACHINE 3 PCS) DIE CUTTING STATION (INCLUDING MATRIX REWINDER) 330 MM 96 T-192T MAXIMUM WORKING WIDTH OF A MAGNETIC CYLINDER (FLEXOR TYPE) 330 MM 96 T-192T DIE-CUTTING CYLINDER DRIVEN BY A SERVO DRIVE MODIFIED PRESSURE BRIDGE ALLOWING TO LIFT THE MAGNETIC DIE CYLINDER WITHOUT HOIST TO MOUNT THE MAGNETIC DIE PLATE. CONTROL SYSTEM FOR OFF-LINE IN REGISTER DIE CUTTING DO 100 M/MIN MAXIMUM MACHINE SPEED DURING IN-REGISTER DIE-CUTTING PROCESS FOR STABLE MATERIALS 100 M/MIN HYDRAULIC PRESSURE READ OUT - 2 CLOCKS VACUUM BELT CONTROL PANEL ON MOVABLE ARM EQUIPPED WITH: MICRO-PROCESSOR CONTROL SYSTEM ELECTRONIC COUNTER (LABELS/METERS) PRECISE ADJUSTMENT OF REWIND AND UNWIND WEB TENSION ELECTRONIC CORRECTION OF WEB TENSION ON UNWIND AUTOMATIC STOP AT ROLL END REWIND UNIT EQUIPPED WITH 1 PNEUMATIC REWIND SPINDLE R (SERVO DRIVEN) 76 MM MAXIMUM REWIND DIAMETER /440 MM LAY ON ROLLER SIMPLE CHANGE OF WINDING DIRECTION SIMPLE CHANGE OF SPINDLE DIAMETER 2 REWIND SHAFT WITH PNEUMATIC SPINDLE DIAMETER SERWO DRIVEN 76MM MAXIMUM REWIND DIAMETER (FOR 2 SPINDLES) 310MM SIMPLE CHANGE OF WINDING DIRECTION SIMPLE CHANGE OF SPINDLE DIAMETER COUNTING PHOTO CELL NON-STOP STACKER UNIT TO PRODUCE AUTOMATICALLY READY STACKS WITH A MAX. HEIGHT OF 150MM. THE READY STACKS ARE DELIVERED BY MEANS OF A PUSHING SYSTEM. THE RESTRICTION IS A MIN. LABEL SIZE OF 7CM. FOR SMALLER LABELS, 3,5CM – 7CM, THE STACK HAS TO BE TAKEN OUT BY THE 45° PINS MANUALLY. MAX. LABEL SIZE DEPENDING ON WORKING WIDTH OF MAGNETIC CYLINDER. STACK UNIT FOR 4 STREAMS (MAX) DELIVERY CONVEYOR STACKER NON -STOP SEE THE DRAWING DELIVERY CONVEYOR TABLE, INCLUDING VACUUM-BELT (12) AND VACUUM-PUMP (MAX. 4 STREAMS ACROSS) CONVEYOR MOTOR STOP WHEELS VACUUM MOTOR SEPARATION O-BELTS STACK TABLE MOTOR AUTOMATIC OUT-FEED PUSHER STACK TABLE JOGGERS TRANSPORT BELTS COLLECTION TABLE FOR TAKE OFF –THE STACKS SHEAR CUTTING UNIT WITH 3 KNIVES CONTROL PANEL FOR STACKER PANEL ANTISTATIC BARS (TOTAL IN THE MACHINE 3 PCS) POWER UNIT FOR ANTISTATIC BARS MACHINE IS IN PRODUCTION LOCATED IN ENGLAND
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w20-xxl for extra large/wide products<br><br>automatic side sealing machine for shrinkwrapping packaging. suitable for very large/wide products. ideal to be combined with shrinktunnel-pof-xtra wide. suitable for fully automated inline production. automatic and manual infeed possible. <br><br>- specifications: max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions: unlimited length, w+h max. 700mm, h max. 150mm | weight (net/gross): 800/900kg | power consumption | 380v, 2.5kw | air: 5,5 bar/0,1m³/min | machine dimesions: l2000xw1750xh1350mm.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W20-XXL FOR EXTRA LARGE/WIDE PRODUCTS

AUTOMATIC SIDE SEALING MACHINE FOR SHRINKWRAPPING PACKAGING. SUITABLE FOR VERY LARGE/WIDE PRODUCTS. IDEAL TO BE COMBINED WITH SHRINKTUNNEL-POF-XTRA WIDE. SUITABLE FOR FULLY AUTOMATED INLINE PRODUCTION. AUTOMATIC AND MANUAL INFEED POSSIBLE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 20 CYCLES/MINUTE | MAX. PRODUCT DIMENSIONS: UNLIMITED LENGTH, W+H MAX. 700MM, H MAX. 150MM | WEIGHT (NET/GROSS): 800/900KG | POWER CONSUMPTION | 380V, 2.5KW | AIR: 5,5 BAR/0,1M³/MIN | MACHINE DIMESIONS: L2000XW1750XH1350MM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-max. admission height: 30mm, admission width: 150mm, max. cable cross section cu stranded/ solid: 70/ 10mm², max. feed rate: 1m/s, compressed air supply: 6bar, length: 430mm, width: 730mm, height: 560mm, weight: 65kg.  MAX. ADMISSION HEIGHT: 30MM, ADMISSION WIDTH: 150MM, MAX. CABLE CROSS SECTION CU STRANDED/ SOLID: 70/ 10MM², MAX. FEED RATE: 1M/S, COMPRESSED AIR SUPPLY: 6BAR, LENGTH: 430MM, WIDTH: 730MM, HEIGHT: 560MM, WEIGHT: 65KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher 14-head (4.0 liter) ip67 waterproof<br><br>weighing unit with 14 weighing heads (springless hoppers) for very precise weigh checking, with 4.0-liter volume each. special design for wet environments and/or products or where a frequent washing of the machine is required (salads, pet food, frozen food up to 150mm, non food, etc). <br><br>- specifications: max. speed of the machine in neutral: 80 cycles/minute | weighing range: 10-3000g, accuracy: +/- 0.5-2.0g | touchscreen (large version) operation | stainless steel | 220v, 2.5kw | l2106xw1466xh1758 | 800/850kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER 14-HEAD (4.0 LITER) IP67 WATERPROOF

WEIGHING UNIT WITH 14 WEIGHING HEADS (SPRINGLESS HOPPERS) FOR VERY PRECISE WEIGH CHECKING, WITH 4.0-LITER VOLUME EACH. SPECIAL DESIGN FOR WET ENVIRONMENTS AND/OR PRODUCTS OR WHERE A FREQUENT WASHING OF THE MACHINE IS REQUIRED (SALADS, PET FOOD, FROZEN FOOD UP TO 150MM, NON FOOD, ETC).

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MINUTE | WEIGHING RANGE: 10-3000G, ACCURACY: +/- 0.5-2.0G | TOUCHSCREEN (LARGE VERSION) OPERATION | STAINLESS STEEL | 220V, 2.5KW | L2106XW1466XH1758 | 800/850KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1150mm, z-travel: 260mm, swing over bed/ slide: 475/ 710mm, max. turning diameter: 460mm, turning length: 1000mm, rotational speed: 100-4500/min, controls: fagor cnc 8055, length: 3010mm, width: 1800mm, height: 2020mm, weight: 2.55t, including various jaw chucks, tool cones and accessories.  X-TRAVEL: 1150MM, Z-TRAVEL: 260MM, SWING OVER BED/ SLIDE: 475/ 710MM, MAX. TURNING DIAMETER: 460MM, TURNING LENGTH: 1000MM, ROTATIONAL SPEED: 100-4500/MIN, CONTROLS: FAGOR CNC 8055, LENGTH: 3010MM, WIDTH: 1800MM, HEIGHT: 2020MM, WEIGHT: 2.55T, INCLUDING VARIOUS JAW CHUCKS, TOOL CONES AND ACCESSORIES.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher 10-head (4.0 liter) ip67 waterproof<br><br>weighing unit with 10 weighing heads (springless hoppers) for very precise weigh checking, with 4.0-liter volume each. special design for wet environments and/or products or where a frequent washing of the machine is required (salads, pet food, frozen food up to 150mm, non food, etc). <br><br>- specifications: max. speed of the machine in neutral: 50 cycles/minute | weighing range: 10-3000g, accuracy: +/- 0.5-2.0g | touchscreen (large version) operation | stainless steel | 220v, 2.0kw | l1906xw1266xh1603 | 700/750kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER 10-HEAD (4.0 LITER) IP67 WATERPROOF

WEIGHING UNIT WITH 10 WEIGHING HEADS (SPRINGLESS HOPPERS) FOR VERY PRECISE WEIGH CHECKING, WITH 4.0-LITER VOLUME EACH. SPECIAL DESIGN FOR WET ENVIRONMENTS AND/OR PRODUCTS OR WHERE A FREQUENT WASHING OF THE MACHINE IS REQUIRED (SALADS, PET FOOD, FROZEN FOOD UP TO 150MM, NON FOOD, ETC).

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | WEIGHING RANGE: 10-3000G, ACCURACY: +/- 0.5-2.0G | TOUCHSCREEN (LARGE VERSION) OPERATION | STAINLESS STEEL | 220V, 2.0KW | L1906XW1266XH1603 | 700/750KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-m. no.: 1197			
equipment / additional information:
pockets: 				2
pass-through width (cm): 		max. 36 // min. 8
continuous length (cm): 		max. 50 // min. 7
fold lengths (cm): 			min.4 // max. 22/35/45
paper thicknesses: 			40 to 250 gr / m2
folding rate: 				approx. 30`000 sheets a4 / hour
speed: 				electronically infinitely adjustable up to 150m / min.
electrical connection: 		220v / 50hz / 13a / motor 240w
		
  M. NO.: 1197 EQUIPMENT / ADDITIONAL INFORMATION: POCKETS: 2 PASS-THROUGH WIDTH (CM): MAX. 36 // MIN. 8 CONTINUOUS LENGTH (CM): MAX. 50 // MIN. 7 FOLD LENGTHS (CM): MIN.4 // MAX. 22/35/45 PAPER THICKNESSES: 40 TO 250 GR / M2 FOLDING RATE: APPROX. 30`000 SHEETS A4 / HOUR SPEED: ELECTRONICALLY INFINITELY ADJUSTABLE UP TO 150M / MIN. ELECTRICAL CONNECTION: 220V / 50HZ / 13A / MOTOR 240W
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap eco-complete vffs liquid/pump xl<br><br>complete dosing and packaging system for liquids including tank, liquid pump and outfeed conveyor. suitable for viscous and non-viscous liquids such as cosmetic cream, tooth paste, skin lotion, shampoo, mayonnaise, ketchup, honey, fruit jam, edible oil, vinegar, juice, milk etc. the vertical packaging machine (vffs) is equipped with plc (control via color touchscreen user interface, different languages available e.g. english, german etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for pe film (possibly additional costs for the pe unit). <br><br>- specifications of vffs packaging machine: filling range: up to 5000ml | film width: max. 620mm | bag size (mm): min.-max. l(80-400)xw(180-300) | max. speed of the machine in neutral: 45 cycles/min | stainless steel 304 | 220v, 5kw | 6bar, 0.4m³/min | packaging machine dimensions lxwxh: approx. 1780x1850x1950mm | machine weight: 700kg. <br><br>- specifications of tank and liquid pump: tank capacity approx. 50l (individual customizing possible) | height approx. 70mm | liquid pump is in different versions available such as: 10~150ml, 150~500ml, 500ml~1l, 1l~2l, 2l~5l etc. the pump system can be customized to meet individual customer/product requirements (possibly additional costs), dimensions of tank and pump depends on it. the outfeed conveyor has a stainless steel 304 frame. <br><br>- specifications: conveying speed 30m/min | 220v, 0.55kw | conveyor dimensions lxwxh: approx. 1850x550x1230mm | weight: 80kg. total dimensions of complete system approximately l1780xw3700xh2020mm, depending on final layout. generally the system has to be customized to meet individual customer/product requirements. therefore deviations of shown specifications of modules and machines are possible. main components: color touchscreen siemens, plc controller siemens, servo motor siemens, cylinder airtac, solenoid valve airtac, relay omron, film pulling motor siemens.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP ECO-COMPLETE VFFS LIQUID/PUMP XL

COMPLETE DOSING AND PACKAGING SYSTEM FOR LIQUIDS INCLUDING TANK, LIQUID PUMP AND OUTFEED CONVEYOR. SUITABLE FOR VISCOUS AND NON-VISCOUS LIQUIDS SUCH AS COSMETIC CREAM, TOOTH PASTE, SKIN LOTION, SHAMPOO, MAYONNAISE, KETCHUP, HONEY, FRUIT JAM, EDIBLE OIL, VINEGAR, JUICE, MILK ETC. THE VERTICAL PACKAGING MACHINE (VFFS) IS EQUIPPED WITH PLC (CONTROL VIA COLOR TOUCHSCREEN USER INTERFACE, DIFFERENT LANGUAGES AVAILABLE E.G. ENGLISH, GERMAN ETC. ),DATE PRINTER, AUTOMATIC PROGRAM SET-UP, MARK SENSOR REGISTRATION CONTROL, QUICK CHANGE FORMER ASSEMBLY, PNEUMATIC SEALING UNIT, SERVO MOTOR FILM PULLING, DOUBLE PULLING POSSIBLE, AIR EXHAUSTING DEVICE, SUPPORTING DEVICE OF FINISHED BAGS, HOLE PUNCHING DEVICE, SUITABLE FOR PE FILM (POSSIBLY ADDITIONAL COSTS FOR THE PE UNIT).

- SPECIFICATIONS OF VFFS PACKAGING MACHINE: FILLING RANGE: UP TO 5000ML | FILM WIDTH: MAX. 620MM | BAG SIZE (MM): MIN.-MAX. L(80-400)XW(180-300) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 45 CYCLES/MIN | STAINLESS STEEL 304 | 220V, 5KW | 6BAR, 0.4M³/MIN | PACKAGING MACHINE DIMENSIONS LXWXH: APPROX. 1780X1850X1950MM | MACHINE WEIGHT: 700KG.

- SPECIFICATIONS OF TANK AND LIQUID PUMP: TANK CAPACITY APPROX. 50L (INDIVIDUAL CUSTOMIZING POSSIBLE) | HEIGHT APPROX. 70MM | LIQUID PUMP IS IN DIFFERENT VERSIONS AVAILABLE SUCH AS: 10~150ML, 150~500ML, 500ML~1L, 1L~2L, 2L~5L ETC. THE PUMP SYSTEM CAN BE CUSTOMIZED TO MEET INDIVIDUAL CUSTOMER/PRODUCT REQUIREMENTS (POSSIBLY ADDITIONAL COSTS), DIMENSIONS OF TANK AND PUMP DEPENDS ON IT. THE OUTFEED CONVEYOR HAS A STAINLESS STEEL 304 FRAME.

- SPECIFICATIONS: CONVEYING SPEED 30M/MIN | 220V, 0.55KW | CONVEYOR DIMENSIONS LXWXH: APPROX. 1850X550X1230MM | WEIGHT: 80KG. TOTAL DIMENSIONS OF COMPLETE SYSTEM APPROXIMATELY L1780XW3700XH2020MM, DEPENDING ON FINAL LAYOUT. GENERALLY THE SYSTEM HAS TO BE CUSTOMIZED TO MEET INDIVIDUAL CUSTOMER/PRODUCT REQUIREMENTS. THEREFORE DEVIATIONS OF SHOWN SPECIFICATIONS OF MODULES AND MACHINES ARE POSSIBLE. MAIN COMPONENTS: COLOR TOUCHSCREEN SIEMENS, PLC CONTROLLER SIEMENS, SERVO MOTOR SIEMENS, CYLINDER AIRTAC, SOLENOID VALVE AIRTAC, RELAY OMRON, FILM PULLING MOTOR SIEMENS.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-ashot weight: 700ps, closing force: 2500kn, distance between tie bars: 630x630mm, max. plate distance: 1150mm, min. tool installation height: 400mm, opening stroke: 750mm, ejector stroke: 240mm, available after march 2019.  ASHOT WEIGHT: 700PS, CLOSING FORCE: 2500KN, DISTANCE BETWEEN TIE BARS: 630X630MM, MAX. PLATE DISTANCE: 1150MM, MIN. TOOL INSTALLATION HEIGHT: 400MM, OPENING STROKE: 750MM, EJECTOR STROKE: 240MM, AVAILABLE AFTER MARCH 2019.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap eco-complete vffs liquid/pump l<br><br>complete dosing and packaging system for liquids including tank, liquid pump and outfeed conveyor. suitable for viscous and non-viscous liquids such as cosmetic cream, tooth paste, skin lotion, shampoo, mayonnaise, ketchup, honey, fruit jam, edible oil, vinegar, juice, milk etc. the vertical packaging machine (vffs) is equipped with plc (control via color touchscreen user interface, different languages available e.g. english, german, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for pe film (possibly additional costs for the pe unit). <br><br>- specifications of vffs packaging machine: filling range: up to 3000ml | film width: max. 520mm | bag size (mm): min.-max. l(80-400)xw(80-250) | max. speed of the machine in neutral: 50 cycles/min | stainless steel 304 | 220v, 4kw, 6bar | 0.4m³/min | packaging machine dimensions lxwxh: approx. 1150x1790x1650mm | machine weight: 600kg. <br><br>- specifications of tank and liquid pump: tank capacity approx. 50l (individual customizing possible) | height: approx. 70mm | liquid pump is in different versions available such as: 10~150ml, 150~500ml, 500ml~1l, 1l~2l, 2l~5l etc. the pump system can be customized to meet individual customer/product requirements (possibly additional costs), dimensions of tank and pump depends on it. the outfeed conveyor has a stainless steel 304 frame. <br><br>- specifications: conveying speed: 30m/min | 220v, 0.55kw | conveyor dimensions lxwxh: approx. 1850x550x1230mm, weight: 80kg. total dimensions of complete system approximately l1780xw3640xh1720mm, depending on final layout. generally the system has to be customized to meet individual customer/product requirements. therefore deviations of shown specifications of modules and machines are possible. main components: color touchscreen siemens, plc controller siemens, servo motor siemens, cylinder airtac, solenoid valve airtac, relay omron, film pulling motor siemens.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP ECO-COMPLETE VFFS LIQUID/PUMP L

COMPLETE DOSING AND PACKAGING SYSTEM FOR LIQUIDS INCLUDING TANK, LIQUID PUMP AND OUTFEED CONVEYOR. SUITABLE FOR VISCOUS AND NON-VISCOUS LIQUIDS SUCH AS COSMETIC CREAM, TOOTH PASTE, SKIN LOTION, SHAMPOO, MAYONNAISE, KETCHUP, HONEY, FRUIT JAM, EDIBLE OIL, VINEGAR, JUICE, MILK ETC. THE VERTICAL PACKAGING MACHINE (VFFS) IS EQUIPPED WITH PLC (CONTROL VIA COLOR TOUCHSCREEN USER INTERFACE, DIFFERENT LANGUAGES AVAILABLE E.G. ENGLISH, GERMAN, ETC.), DATE PRINTER, AUTOMATIC PROGRAM SET-UP, MARK SENSOR REGISTRATION CONTROL, QUICK CHANGE FORMER ASSEMBLY, PNEUMATIC SEALING UNIT, SERVO MOTOR FILM PULLING, DOUBLE PULLING POSSIBLE, AIR EXHAUSTING DEVICE, SUPPORTING DEVICE OF FINISHED BAGS, HOLE PUNCHING DEVICE, SUITABLE FOR PE FILM (POSSIBLY ADDITIONAL COSTS FOR THE PE UNIT).

- SPECIFICATIONS OF VFFS PACKAGING MACHINE: FILLING RANGE: UP TO 3000ML | FILM WIDTH: MAX. 520MM | BAG SIZE (MM): MIN.-MAX. L(80-400)XW(80-250) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MIN | STAINLESS STEEL 304 | 220V, 4KW, 6BAR | 0.4M³/MIN | PACKAGING MACHINE DIMENSIONS LXWXH: APPROX. 1150X1790X1650MM | MACHINE WEIGHT: 600KG.

- SPECIFICATIONS OF TANK AND LIQUID PUMP: TANK CAPACITY APPROX. 50L (INDIVIDUAL CUSTOMIZING POSSIBLE) | HEIGHT: APPROX. 70MM | LIQUID PUMP IS IN DIFFERENT VERSIONS AVAILABLE SUCH AS: 10~150ML, 150~500ML, 500ML~1L, 1L~2L, 2L~5L ETC. THE PUMP SYSTEM CAN BE CUSTOMIZED TO MEET INDIVIDUAL CUSTOMER/PRODUCT REQUIREMENTS (POSSIBLY ADDITIONAL COSTS), DIMENSIONS OF TANK AND PUMP DEPENDS ON IT. THE OUTFEED CONVEYOR HAS A STAINLESS STEEL 304 FRAME.

- SPECIFICATIONS: CONVEYING SPEED: 30M/MIN | 220V, 0.55KW | CONVEYOR DIMENSIONS LXWXH: APPROX. 1850X550X1230MM, WEIGHT: 80KG. TOTAL DIMENSIONS OF COMPLETE SYSTEM APPROXIMATELY L1780XW3640XH1720MM, DEPENDING ON FINAL LAYOUT. GENERALLY THE SYSTEM HAS TO BE CUSTOMIZED TO MEET INDIVIDUAL CUSTOMER/PRODUCT REQUIREMENTS. THEREFORE DEVIATIONS OF SHOWN SPECIFICATIONS OF MODULES AND MACHINES ARE POSSIBLE. MAIN COMPONENTS: COLOR TOUCHSCREEN SIEMENS, PLC CONTROLLER SIEMENS, SERVO MOTOR SIEMENS, CYLINDER AIRTAC, SOLENOID VALVE AIRTAC, RELAY OMRON, FILM PULLING MOTOR SIEMENS.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-600mm cgl(continuous galvanizing line)

manufacturing year;2003

strip width:200~600mm

strip thickness:1~3.2mm

material: hot rolled carbon steel(hr)

incoming coil data:weight:15ton

                  coil i.d: 508mm

                  coil o.d:2000mm(max)

outcoming coil data:weight:15ton

                  coil i.d: 508mm

                  coil o.d:2000mm(max)

type of coating:zink

coating quantity:100~600g/m2

 (line specification)

type:continuous pickling cum non-oxidation furnace type

line direction:from right to left

line speed:20m/min~80m/min

product capacity:30ton/hour=200,000ton/year

furnace fuel: natural gas

 operators: 6persons/shift

 installation size: 16m x 150m

-------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea   
  

  600MM CGL(CONTINUOUS GALVANIZING LINE) MANUFACTURING YEAR;2003 STRIP WIDTH:200~600MM STRIP THICKNESS:1~3.2MM MATERIAL: HOT ROLLED CARBON STEEL(HR) INCOMING COIL DATA:WEIGHT:15TON COIL I.D: 508MM COIL O.D:2000MM(MAX) OUTCOMING COIL DATA:WEIGHT:15TON COIL I.D: 508MM COIL O.D:2000MM(MAX) TYPE OF COATING:ZINK COATING QUANTITY:100~600G/M2 (LINE SPECIFICATION) TYPE:CONTINUOUS PICKLING CUM NON-OXIDATION FURNACE TYPE LINE DIRECTION:FROM RIGHT TO LEFT LINE SPEED:20M/MIN~80M/MIN PRODUCT CAPACITY:30TON/HOUR=200,000TON/YEAR FURNACE FUEL: NATURAL GAS OPERATORS: 6PERSONS/SHIFT INSTALLATION SIZE: 16M X 150M ------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-amtec vertiwrap eco-complete vffs liquid/pump m<br><br>complete dosing and packaging system for liquids including tank, liquid pump and outfeed conveyor. suitable for viscous and non-viscous liquids such as cosmetic cream, tooth paste, skin lotion, shampoo, mayonnaise, ketchup, honey, fruit jam, edible oil, vinegar, juice, milk etc. the vertical packaging machine (vffs) is equipped with plc (control via color touchscreen user interface, different languages available e.g. english, german, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for pe film (possibly additional costs for the pe unit). <br><br>- specifications of vffs packaging machine: filling range: 150-1200ml | film width: max. 420mm | bag size (mm): min.-max. l(60-300)xw(60-200) | max. speed of the machine in neutral: 50 cycles/min | stainless steel 304 | 220v, 2.2kw | 6bar, 0.3m³/min | packaging machine dimensions lxwxh: approx. 1080x1300x1400mm | machine weight: 500kg. <br><br>- specifications of tank and liquid pump: tank capacity approx. 50l (individual customizing possible) | height: approx. 70mm | liquid pump is in different versions available such as: 10~150ml, 150~500ml, 500ml~1l, 1l~2l, 2l~5l etc. the pump system can be customized to meet individual customer/product requirements (possibly additional costs), dimensions of tank and pump depends on it. the outfeed conveyor has a stainless steel 304 frame. <br><br>- specifications: conveying speed: 30m/min | 220v, 0.55kw | conveyor dimensions lxwxh: approx. 1850x550x1230mm | weight: 80kg. total dimensions of complete system approximately l1080xw3150xh1470mm, depending on final layout. generally the system has to be customized to meet individual customer/product requirements. therefore deviations of shown specifications of modules and machines are possible. main components: color touchscreen siemens, plc controller siemens, servo motor siemens, cylinder airtac, solenoid valve airtac, relay omron, film pulling motor siemens.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP ECO-COMPLETE VFFS LIQUID/PUMP M

COMPLETE DOSING AND PACKAGING SYSTEM FOR LIQUIDS INCLUDING TANK, LIQUID PUMP AND OUTFEED CONVEYOR. SUITABLE FOR VISCOUS AND NON-VISCOUS LIQUIDS SUCH AS COSMETIC CREAM, TOOTH PASTE, SKIN LOTION, SHAMPOO, MAYONNAISE, KETCHUP, HONEY, FRUIT JAM, EDIBLE OIL, VINEGAR, JUICE, MILK ETC. THE VERTICAL PACKAGING MACHINE (VFFS) IS EQUIPPED WITH PLC (CONTROL VIA COLOR TOUCHSCREEN USER INTERFACE, DIFFERENT LANGUAGES AVAILABLE E.G. ENGLISH, GERMAN, ETC.), DATE PRINTER, AUTOMATIC PROGRAM SET-UP, MARK SENSOR REGISTRATION CONTROL, QUICK CHANGE FORMER ASSEMBLY, PNEUMATIC SEALING UNIT, SERVO MOTOR FILM PULLING, DOUBLE PULLING POSSIBLE, AIR EXHAUSTING DEVICE, SUPPORTING DEVICE OF FINISHED BAGS, HOLE PUNCHING DEVICE, SUITABLE FOR PE FILM (POSSIBLY ADDITIONAL COSTS FOR THE PE UNIT).

- SPECIFICATIONS OF VFFS PACKAGING MACHINE: FILLING RANGE: 150-1200ML | FILM WIDTH: MAX. 420MM | BAG SIZE (MM): MIN.-MAX. L(60-300)XW(60-200) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MIN | STAINLESS STEEL 304 | 220V, 2.2KW | 6BAR, 0.3M³/MIN | PACKAGING MACHINE DIMENSIONS LXWXH: APPROX. 1080X1300X1400MM | MACHINE WEIGHT: 500KG.

- SPECIFICATIONS OF TANK AND LIQUID PUMP: TANK CAPACITY APPROX. 50L (INDIVIDUAL CUSTOMIZING POSSIBLE) | HEIGHT: APPROX. 70MM | LIQUID PUMP IS IN DIFFERENT VERSIONS AVAILABLE SUCH AS: 10~150ML, 150~500ML, 500ML~1L, 1L~2L, 2L~5L ETC. THE PUMP SYSTEM CAN BE CUSTOMIZED TO MEET INDIVIDUAL CUSTOMER/PRODUCT REQUIREMENTS (POSSIBLY ADDITIONAL COSTS), DIMENSIONS OF TANK AND PUMP DEPENDS ON IT. THE OUTFEED CONVEYOR HAS A STAINLESS STEEL 304 FRAME.

- SPECIFICATIONS: CONVEYING SPEED: 30M/MIN | 220V, 0.55KW | CONVEYOR DIMENSIONS LXWXH: APPROX. 1850X550X1230MM | WEIGHT: 80KG. TOTAL DIMENSIONS OF COMPLETE SYSTEM APPROXIMATELY L1080XW3150XH1470MM, DEPENDING ON FINAL LAYOUT. GENERALLY THE SYSTEM HAS TO BE CUSTOMIZED TO MEET INDIVIDUAL CUSTOMER/PRODUCT REQUIREMENTS. THEREFORE DEVIATIONS OF SHOWN SPECIFICATIONS OF MODULES AND MACHINES ARE POSSIBLE. MAIN COMPONENTS: COLOR TOUCHSCREEN SIEMENS, PLC CONTROLLER SIEMENS, SERVO MOTOR SIEMENS, CYLINDER AIRTAC, SOLENOID VALVE AIRTAC, RELAY OMRON, FILM PULLING MOTOR SIEMENS.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-work table / butcher table
 stainless steel approx. 400 x 152 x 86 cm used - rough cleaned

stainless steel table for meat processing operation
state in photos (roughly pre cleaned)
the table is covered with food-safe plastic sheets. 
in the middle is a strip of stainless steel.
because the plastic plates on each long side and a short side, can be worked with several people in the chain.

there is even a stainless steel rack, boxes or similar can be placed on the surcharge. you run over 10 plastic rollers.
for holes in the stainless steel strip have been drilled at both ends.

dimensions table:
width: approx. 400 cm
depth: approx.  152 cm
height: 86 cm

dimensions plastic plates:

2 piece approx. 178 x 50 x 4 cm (w x d x h)
2 piece approx. 178 x 50 x 1,5 cm (w x d x h
1 piece approx. 150 x 40 x 4 cm (w x d x h)

the working table is stock in our cologne and can be visited by appointment.
we offer a cleaning planer for the white boards under the item-no. 391486876019.

pick up must be maximum 10 days after checkout. WORK TABLE / BUTCHER TABLE STAINLESS STEEL APPROX. 400 X 152 X 86 CM USED - ROUGH CLEANED STAINLESS STEEL TABLE FOR MEAT PROCESSING OPERATION STATE IN PHOTOS (ROUGHLY PRE CLEANED) THE TABLE IS COVERED WITH FOOD-SAFE PLASTIC SHEETS. IN THE MIDDLE IS A STRIP OF STAINLESS STEEL. BECAUSE THE PLASTIC PLATES ON EACH LONG SIDE AND A SHORT SIDE, CAN BE WORKED WITH SEVERAL PEOPLE IN THE CHAIN. THERE IS EVEN A STAINLESS STEEL RACK, BOXES OR SIMILAR CAN BE PLACED ON THE SURCHARGE. YOU RUN OVER 10 PLASTIC ROLLERS. FOR HOLES IN THE STAINLESS STEEL STRIP HAVE BEEN DRILLED AT BOTH ENDS. DIMENSIONS TABLE: WIDTH: APPROX. 400 CM DEPTH: APPROX. 152 CM HEIGHT: 86 CM DIMENSIONS PLASTIC PLATES: 2 PIECE APPROX. 178 X 50 X 4 CM (W X D X H) 2 PIECE APPROX. 178 X 50 X 1,5 CM (W X D X H 1 PIECE APPROX. 150 X 40 X 4 CM (W X D X H) THE WORKING TABLE IS STOCK IN OUR COLOGNE AND CAN BE VISITED BY APPOINTMENT. WE OFFER A CLEANING PLANER FOR THE WHITE BOARDS UNDER THE ITEM-NO. 391486876019. PICK UP MUST BE MAXIMUM 10 DAYS AFTER CHECKOUT.
Vendedor: AY-BACK Technik Bäckerei & Gastronomiemaschinen
Año de construcción: usado
Ubicación: Land-amtec vertiwrap outfeed high speed weigh checker 220mm / 20-1000g<br><br>high speed weigh checker with max. speed of 150 cycles/minute in neutral. stainless steel (ss304) version, memory card parameter storage (up to 100 parameters), touch screen operation. suitable to supply corrective signal to connected equipment. <br><br>- specifications: accuracy: +/- 0.5-1.5g | belt size: l450xw220mm | minimum scale: 0.1g | belt speed: 5-150m/min | power: 220v, 250w. optional devices: blower device, t-push device, two way swing arm, slide down device.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP OUTFEED HIGH SPEED WEIGH CHECKER 220MM / 20-1000G

HIGH SPEED WEIGH CHECKER WITH MAX. SPEED OF 150 CYCLES/MINUTE IN NEUTRAL. STAINLESS STEEL (SS304) VERSION, MEMORY CARD PARAMETER STORAGE (UP TO 100 PARAMETERS), TOUCH SCREEN OPERATION. SUITABLE TO SUPPLY CORRECTIVE SIGNAL TO CONNECTED EQUIPMENT.

- SPECIFICATIONS: ACCURACY: +/- 0.5-1.5G | BELT SIZE: L450XW220MM | MINIMUM SCALE: 0.1G | BELT SPEED: 5-150M/MIN | POWER: 220V, 250W. OPTIONAL DEVICES: BLOWER DEVICE, T-PUSH DEVICE, TWO WAY SWING ARM, SLIDE DOWN DEVICE.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-amtec vertiwrap multi-feed-vffs-system (2 auger-/2 volume-doser) to mix granulate/powder pillow bg<br><br>automatic packing machine: siemens plc controlled, equipped with volumetric cups system. applicable for the granule packing. standard features integrate metering, bag-making, packaging, sealing, printing and counting. standard positioning with servo film transporting system. stable for transporting film with two synchronous belts. high automation with auto correction function. reasonable structure, convenient adjusting operation and maintenance. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | bag size: l(50-230mm), w(50-150mm) | the max width of packing film: 320 mm | thickness of film: 0.04-0.09mm | bag making mode: pillow bag, gusset bag | range of measuring: 150-500ml | air consumption: 0.8mps 0.25m³/min | power/voltage: 2kw/220v, 50hz | dimension (lxwxh): 1200×905×1300mm | weight: 300kg | body: ss304 | touch screen siemens, plc siemens, control valve siemens, servo motor panasonic, cylinder and pneumatic components smc/festo, solenoid valve smc/festo, triplet union smc, thermostats omron. - volumetric cup device: suitable for automatic measuring of small granule materials and powder materials with good fluidity, such as granulated sugar, seeds, etc. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/min | weight range: 100g-500g | soft brush with motor: the turntable is equipped with a soft brush to handle the product carefully | auger system: range 1-50ml | accuracy: within +/-0.1g | max. speed of the machine in neutral: 50 cycles/min | power source: 220v, 50hz/110w. - please note: this is only a sample system. please let us know your requirements.<br><br>that machine/system is available in different versions for different bag types, packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MULTI-FEED-VFFS-SYSTEM (2 AUGER-/2 VOLUME-DOSER) TO MIX GRANULATE/POWDER PILLOW BG

AUTOMATIC PACKING MACHINE: SIEMENS PLC CONTROLLED, EQUIPPED WITH VOLUMETRIC CUPS SYSTEM. APPLICABLE FOR THE GRANULE PACKING. STANDARD FEATURES INTEGRATE METERING, BAG-MAKING, PACKAGING, SEALING, PRINTING AND COUNTING. STANDARD POSITIONING WITH SERVO FILM TRANSPORTING SYSTEM. STABLE FOR TRANSPORTING FILM WITH TWO SYNCHRONOUS BELTS. HIGH AUTOMATION WITH AUTO CORRECTION FUNCTION. REASONABLE STRUCTURE, CONVENIENT ADJUSTING OPERATION AND MAINTENANCE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | BAG SIZE: L(50-230MM), W(50-150MM) | THE MAX WIDTH OF PACKING FILM: 320 MM | THICKNESS OF FILM: 0.04-0.09MM | BAG MAKING MODE: PILLOW BAG, GUSSET BAG | RANGE OF MEASURING: 150-500ML | AIR CONSUMPTION: 0.8MPS 0.25M³/MIN | POWER/VOLTAGE: 2KW/220V, 50HZ | DIMENSION (LXWXH): 1200×905×1300MM | WEIGHT: 300KG | BODY: SS304 | TOUCH SCREEN SIEMENS, PLC SIEMENS, CONTROL VALVE SIEMENS, SERVO MOTOR PANASONIC, CYLINDER AND PNEUMATIC COMPONENTS SMC/FESTO, SOLENOID VALVE SMC/FESTO, TRIPLET UNION SMC, THERMOSTATS OMRON. - VOLUMETRIC CUP DEVICE: SUITABLE FOR AUTOMATIC MEASURING OF SMALL GRANULE MATERIALS AND POWDER MATERIALS WITH GOOD FLUIDITY, SUCH AS GRANULATED SUGAR, SEEDS, ETC.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MIN | WEIGHT RANGE: 100G-500G | SOFT BRUSH WITH MOTOR: THE TURNTABLE IS EQUIPPED WITH A SOFT BRUSH TO HANDLE THE PRODUCT CAREFULLY | AUGER SYSTEM: RANGE 1-50ML | ACCURACY: WITHIN +/-0.1G | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MIN | POWER SOURCE: 220V, 50HZ/110W. - PLEASE NOTE: THIS IS ONLY A SAMPLE SYSTEM. PLEASE LET US KNOW YOUR REQUIREMENTS.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT BAG TYPES, PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-amtec vertiwrap combined metal detector / weigh checker<br><br>combination of metal detector and weigh checker. with two recect devices to check if product metallic impurities and/or meets target weight. <br><br>- specifications: stainless steel framework, weight range: 5-990g | detecting speed 0.2-0.75m/sec | detecting accuracy: fe from Ø 1.0mm, sus from Ø 2.0mm | target weight accuracy: ± 0.5g | tunnel size wxh: 330x150mm | max. passing size wxh: 280x110mm | power: 220v/0.35kw, 50hz/60hz | dimensions and weight: l1700xw600xh900mm, 160/260kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP COMBINED METAL DETECTOR / WEIGH CHECKER

COMBINATION OF METAL DETECTOR AND WEIGH CHECKER. WITH TWO RECECT DEVICES TO CHECK IF PRODUCT METALLIC IMPURITIES AND/OR MEETS TARGET WEIGHT.

- SPECIFICATIONS: STAINLESS STEEL FRAMEWORK, WEIGHT RANGE: 5-990G | DETECTING SPEED 0.2-0.75M/SEC | DETECTING ACCURACY: FE FROM Ø 1.0MM, SUS FROM Ø 2.0MM | TARGET WEIGHT ACCURACY: ± 0.5G | TUNNEL SIZE WXH: 330X150MM | MAX. PASSING SIZE WXH: 280X110MM | POWER: 220V/0.35KW, 50HZ/60HZ | DIMENSIONS AND WEIGHT: L1700XW600XH900MM, 160/260KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter

1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine liquid pillow 20-100ml / 70<br><br>vertical filling machine for low-viscosity liquids into pillow-bags. including liquid dosing device. suitable for laminated compund films like bopp/pe and others. <br><br>- specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 20-100ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-150mm | bag size: max. l50-220xw30-150mm | without air pressure | 220v, 1.7w | stainless steel version (ss201 in housing, contact material part ss304) | machine dimensions: l790xw600xh1780mm | weight: 400kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE LIQUID PILLOW 20-100ML / 70

VERTICAL FILLING MACHINE FOR LOW-VISCOSITY LIQUIDS INTO PILLOW-BAGS. INCLUDING LIQUID DOSING DEVICE. SUITABLE FOR LAMINATED COMPUND FILMS LIKE BOPP/PE AND OTHERS.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 70 CYCLES/MINUTE | SUITABLE FOR VOLUMES FROM 20-100ML | STEPLESS BAG LENGTH REGULATION | ACCURACY: DEPENDING ON WATER LEVEL PRODUCT | MAX. FILM WIDTH: 30-150MM | BAG SIZE: MAX. L50-220XW30-150MM | WITHOUT AIR PRESSURE | 220V, 1.7W | STAINLESS STEEL VERSION (SS201 IN HOUSING, CONTACT MATERIAL PART SS304) | MACHINE DIMENSIONS: L790XW600XH1780MM | WEIGHT: 400KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-1380mm x0.2mm aluminium cold/hot rolling mills

make:korean

manufacturing year:1995

production capacity:: 120,000ton/year(hot coil)   

production capacity: 70,000ton/year(cold coil) 

 

1. hot rolling mill

make:poscon(korean) 

year:1995                

main motor: 2,400?(d.c 600?×4set)                   

line speed: 150m/min               

material width(w)3,100?   

rolling pressure: max. 1,200ton                  

product weight: max. 5ton                 

product size: max. 1,380?w×6~10t                    

production capacity:: 120,000ton/y              

type: two-high reversing mill                    

work roll ass'y ×3set                

roll : 1,050×1,500?                  

d.c motor 600?×4set               

speed: 150m/min             

 

2. 1380mm cold rolling mill  

make:poscon(korean) 

year:1995        

main motor: 2,400?(dc 600?×4set)                   

line speed: 0-600m/min                    

materila width:1,380?

materil thickness:6~10mm         

rolling pressure: 1,200ton                  

product weight: max. 5ton                 

product thickness:0.2mm                   

production capacity: 70,000ton/year

agc system: auto thickness gauge controller

sfc system(shape flatness system)



------------------------------------------------------------------

bmj korea co.,ltd.

director: jongduk baek

mobile: +82-10-7499-2567

e-mail: whitebel64@gmail.com

address: 4f, 27-8, gukjegeumyung-ro 8-gil,


yeongdeungpo-gu, seoul, korea

  1380MM X0.2MM ALUMINIUM COLD/HOT ROLLING MILLS MAKE:KOREAN MANUFACTURING YEAR:1995 PRODUCTION CAPACITY:: 120,000TON/YEAR(HOT COIL) PRODUCTION CAPACITY: 70,000TON/YEAR(COLD COIL) 1. HOT ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(D.C 600?×4SET) LINE SPEED: 150M/MIN MATERIAL WIDTH(W)3,100? ROLLING PRESSURE: MAX. 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT SIZE: MAX. 1,380?W×6~10T PRODUCTION CAPACITY:: 120,000TON/Y TYPE: TWO-HIGH REVERSING MILL WORK ROLL ASS'Y ×3SET ROLL : 1,050×1,500? D.C MOTOR 600?×4SET SPEED: 150M/MIN 2. 1380MM COLD ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(DC 600?×4SET) LINE SPEED: 0-600M/MIN MATERILA WIDTH:1,380? MATERIL THICKNESS:6~10MM ROLLING PRESSURE: 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT THICKNESS:0.2MM PRODUCTION CAPACITY: 70,000TON/YEAR AGC SYSTEM: AUTO THICKNESS GAUGE CONTROLLER SFC SYSTEM(SHAPE FLATNESS SYSTEM) ------------------------------------------------------------------ BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-make unknown, mounted on legs , floorspace 1,3x1,3 m, total height 3,3 m, closed stirring vessel (1x), material stainless steel (304), capacity 1200 ltr, vessel sizes dia. 1200x1150mm, conical bottom , manhole dia. 410mm, top connections 4x dia. 25mm, outlet dia. 35mm, with propellor stirrer make veenstra, type frr-75, motor 0,55 kw, 230/400 voltstirring vesselsstirring vessels > stirring vessels what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, MOUNTED ON LEGS , FLOORSPACE 1,3X1,3 M, TOTAL HEIGHT 3,3 M, CLOSED STIRRING VESSEL (1X), MATERIAL STAINLESS STEEL (304), CAPACITY 1200 LTR, VESSEL SIZES DIA. 1200X1150MM, CONICAL BOTTOM , MANHOLE DIA. 410MM, TOP CONNECTIONS 4X DIA. 25MM, OUTLET DIA. 35MM, WITH PROPELLOR STIRRER MAKE VEENSTRA, TYPE FRR-75, MOTOR 0,55 KW, 230/400 VOLTSTIRRING VESSELSSTIRRING VESSELS > STIRRING VESSELS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-1380mm x0.2mm aluminium cold/hot rolling mills

make:korean

manufacturing year:1995

production capacity:: 120,000ton/year(hot coil)   

production capacity: 70,000ton/year(cold coil) 

 

1. hot rolling mill

make:poscon(korean) 

year:1995                

main motor: 2,400?(d.c 600?×4set)                   

line speed: 150m/min               

material width(w)3,100?   

rolling pressure: max. 1,200ton                  

product weight: max. 5ton                 

product size: max. 1,380?w×6~10t                    

production capacity:: 120,000ton/y              

type: two-high reversing mill                    

work roll ass'y ×3set                

roll : 1,050×1,500?                  

d.c motor 600?×4set               

speed: 150m/min             

 

2. 1380mm cold rolling mill  

make:poscon(korean) 

year:1995        

main motor: 2,400?(dc 600?×4set)                   

line speed: 0-600m/min                    

materila width:1,380?

materil thickness:6~10mm         

rolling pressure: 1,200ton                  

product weight: max. 5ton                 

product thickness:0.2mm                   

production capacity: 70,000ton/year

agc system: auto thickness gauge controller

sfc system(shape flatness system)



------------------------------------------------------------------

bmj korea co.,ltd.

director: jongduk baek

mobile: +82-10-7499-2567

e-mail: whitebel64@gmail.com

address: 4f, 27-8, gukjegeumyung-ro 8-gil,


yeongdeungpo-gu, seoul, korea

  1380MM X0.2MM ALUMINIUM COLD/HOT ROLLING MILLS MAKE:KOREAN MANUFACTURING YEAR:1995 PRODUCTION CAPACITY:: 120,000TON/YEAR(HOT COIL) PRODUCTION CAPACITY: 70,000TON/YEAR(COLD COIL) 1. HOT ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(D.C 600?×4SET) LINE SPEED: 150M/MIN MATERIAL WIDTH(W)3,100? ROLLING PRESSURE: MAX. 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT SIZE: MAX. 1,380?W×6~10T PRODUCTION CAPACITY:: 120,000TON/Y TYPE: TWO-HIGH REVERSING MILL WORK ROLL ASS'Y ×3SET ROLL : 1,050×1,500? D.C MOTOR 600?×4SET SPEED: 150M/MIN 2. 1380MM COLD ROLLING MILL MAKE:POSCON(KOREAN) YEAR:1995 MAIN MOTOR: 2,400?(DC 600?×4SET) LINE SPEED: 0-600M/MIN MATERILA WIDTH:1,380? MATERIL THICKNESS:6~10MM ROLLING PRESSURE: 1,200TON PRODUCT WEIGHT: MAX. 5TON PRODUCT THICKNESS:0.2MM PRODUCTION CAPACITY: 70,000TON/YEAR AGC SYSTEM: AUTO THICKNESS GAUGE CONTROLLER SFC SYSTEM(SHAPE FLATNESS SYSTEM) ------------------------------------------------------------------ BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-make wilhelm deller gmbh siegen (de), no 38433/1, new 2013, heat exchanger , heating surface 50 m2, tube material stainless steel , shell material stainless steel , tube capacity 295 ltr, working pressure tubes -1 / 25 bar, max. temperature 225 degr.c., shell capacity 476 ltr, working pressure shell -1 / 20 bar, shell connections dia.150mm, cover connections (2x) dia.80mm, capacity 4320 kw, floorspace 3,6x1,0 m, weight 1750 kgheat exchangersheat exchangers > heat exchangers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE WILHELM DELLER GMBH SIEGEN (DE), NO 38433/1, NEW 2013, HEAT EXCHANGER , HEATING SURFACE 50 M2, TUBE MATERIAL STAINLESS STEEL , SHELL MATERIAL STAINLESS STEEL , TUBE CAPACITY 295 LTR, WORKING PRESSURE TUBES -1 / 25 BAR, MAX. TEMPERATURE 225 DEGR.C., SHELL CAPACITY 476 LTR, WORKING PRESSURE SHELL -1 / 20 BAR, SHELL CONNECTIONS DIA.150MM, COVER CONNECTIONS (2X) DIA.80MM, CAPACITY 4320 KW, FLOORSPACE 3,6X1,0 M, WEIGHT 1750 KGHEAT EXCHANGERSHEAT EXCHANGERS > HEAT EXCHANGERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-steel strap(wrapping band)production plant  
 make: korean 
year:2013~1994 
(steel band product specification) 
-grade: apex grade 
-item: standard or hi-tensile (non heat) 
-finish: blue paint zinc 
-thickness:0.38~1.27mm 
-width:12.7/16/19/25.4/32mm 
-tensile (kg/?) : min 75 (aim. 85)  
: min 90 (aim. 95) 
  -line speed : 80/150mpm     
 -product capa' : 2,000ton/month 
 
(general specification) 
1) coil thickness : 0.4 ~ 1.2mm      
2) coil weight : max. 7ton   
3) coil width : 260 ~ 520mm    
4) strands : max. 16 cutters   
5) line speed  : 80/150mpm     
6) product capa' : 2,000ton/month     
(0.6t x 19mm x 16st x 80mpm x 500hr/month) 
 
(equipment list) 
2-1. slitting parts   
1) coil saddle x 3set     
2) coil car           
3) uncoiler           
4) snubber roller  
5) coil opener         
6) pinch roll & deflector roller  
7) guide table    
8) side guide and shear       
9) slitter stand        
10) scrap baller      
11) dancing roll    
2-2. blue & painting parts 
1) pulley with shaft & bush  
2) spot welder    
--------------------------------------------

bmj korea co.,ltd.

director: jongduk baek

mobile: +82-10-7499-2567

e-mail: whitebel64@gmail.com

address: 4f, 27-8, gukjegeumyung-ro 8-gil,


yeongdeungpo-gu, seoul, korea STEEL STRAP(WRAPPING BAND)PRODUCTION PLANT MAKE: KOREAN YEAR:2013~1994 (STEEL BAND PRODUCT SPECIFICATION) -GRADE: APEX GRADE -ITEM: STANDARD OR HI-TENSILE (NON HEAT) -FINISH: BLUE PAINT ZINC -THICKNESS:0.38~1.27MM -WIDTH:12.7/16/19/25.4/32MM -TENSILE (KG/?) : MIN 75 (AIM. 85) : MIN 90 (AIM. 95) -LINE SPEED : 80/150MPM -PRODUCT CAPA' : 2,000TON/MONTH (GENERAL SPECIFICATION) 1) COIL THICKNESS : 0.4 ~ 1.2MM 2) COIL WEIGHT : MAX. 7TON 3) COIL WIDTH : 260 ~ 520MM 4) STRANDS : MAX. 16 CUTTERS 5) LINE SPEED : 80/150MPM 6) PRODUCT CAPA' : 2,000TON/MONTH (0.6T X 19MM X 16ST X 80MPM X 500HR/MONTH) (EQUIPMENT LIST) 2-1. SLITTING PARTS 1) COIL SADDLE X 3SET 2) COIL CAR 3) UNCOILER 4) SNUBBER ROLLER 5) COIL OPENER 6) PINCH ROLL & DEFLECTOR ROLLER 7) GUIDE TABLE 8) SIDE GUIDE AND SHEAR 9) SLITTER STAND 10) SCRAP BALLER 11) DANCING ROLL 2-2. BLUE & PAINTING PARTS 1) PULLEY WITH SHAFT & BUSH 2) SPOT WELDER -------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), floorspace 3,7x0,5 m, weight 240 kg, horizontal conveyor screw (1x), material stainless steel , diameter 250mm, length 2700mm, between inlet and outlet ± 2150mm, shaft diameter 110mm, pitch 225mm, inlet dia. 250mm, outlet dia. 250mm, motor 1,1 kw, 220/380 volt, screw speed ± 60 rpmhorizontal conveyor screwsconveyor screws > horizontal conveyor screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), FLOORSPACE 3,7X0,5 M, WEIGHT 240 KG, HORIZONTAL CONVEYOR SCREW (1X), MATERIAL STAINLESS STEEL , DIAMETER 250MM, LENGTH 2700MM, BETWEEN INLET AND OUTLET ± 2150MM, SHAFT DIAMETER 110MM, PITCH 225MM, INLET DIA. 250MM, OUTLET DIA. 250MM, MOTOR 1,1 KW, 220/380 VOLT, SCREW SPEED ± 60 RPMHORIZONTAL CONVEYOR SCREWSCONVEYOR SCREWS > HORIZONTAL CONVEYOR SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 2.300 €
Ubicación: Land-nife jungner; bev 11-110/220e; generator with control cabinet; builder: type g 80; 11kw; 3000 rpm dimensions: 785x785x2000mm & 785x785x2150mm elek. voltage: 220v elek. performance: 11kva speed: 3000 rpm not the fitting?
sign up.
we have many other gastro machines!
greetings NIFE JUNGNER; BEV 11-110/220E; GENERATOR WITH CONTROL CABINET; BUILDER: TYPE G 80; 11KW; 3000 RPM DIMENSIONS: 785X785X2000MM & 785X785X2150MM ELEK. VOLTAGE: 220V ELEK. PERFORMANCE: 11KVA SPEED: 3000 RPM NOT THE FITTING? SIGN UP. WE HAVE MANY OTHER GASTRO MACHINES! GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), mounted on frame , floorspace 1,4x1,4 m, total height 2,1 m, silo (1x), capacity ± 150 ltr, material stainless steel (1.4571), diameter 800mm, conical bottom 950mm, inlet dia. 300mm + 2x dia. 50mm, outlet dia. 150mmsilostanks > silos what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), MOUNTED ON FRAME , FLOORSPACE 1,4X1,4 M, TOTAL HEIGHT 2,1 M, SILO (1X), CAPACITY ± 150 LTR, MATERIAL STAINLESS STEEL (1.4571), DIAMETER 800MM, CONICAL BOTTOM 950MM, INLET DIA. 300MM + 2X DIA. 50MM, OUTLET DIA. 150MMSILOSTANKS > SILOS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 27.500 GBP
Ubicación: Land-horizontal cartoner for blisters with automatic blister infeed and stacking device.

blister packing speeds of up to 300 blisters per minute with folding box output of maximum 100 boxes per minute, depending on blister size and number of blisters in the stack.

designed for single and double stack at the same time (depending on set up) and for reverse tuck box closure.

box size range: length 70mm-150mm, width 30mm-100mm, height 15mm-85mm.

guk fa 21/4 cartonac 91 leaflet folder.
leaflet form format: minimum 80mm x 100mm, maximum 210mm x 300mm.
folding length: 100mm to 210mm.

variable speed drive. inch button. argus laetus 3 coder.

air consumption (with leaflet): 5-8 nm3/h.

220/380v/50hz/4,0kw.

machine size: 2500mm x 1500mm x 1800mm high, approx. weight 1500kg HORIZONTAL CARTONER FOR BLISTERS WITH AUTOMATIC BLISTER INFEED AND STACKING DEVICE. BLISTER PACKING SPEEDS OF UP TO 300 BLISTERS PER MINUTE WITH FOLDING BOX OUTPUT OF MAXIMUM 100 BOXES PER MINUTE, DEPENDING ON BLISTER SIZE AND NUMBER OF BLISTERS IN THE STACK. DESIGNED FOR SINGLE AND DOUBLE STACK AT THE SAME TIME (DEPENDING ON SET UP) AND FOR REVERSE TUCK BOX CLOSURE. BOX SIZE RANGE: LENGTH 70MM-150MM, WIDTH 30MM-100MM, HEIGHT 15MM-85MM. GUK FA 21/4 CARTONAC 91 LEAFLET FOLDER. LEAFLET FORM FORMAT: MINIMUM 80MM X 100MM, MAXIMUM 210MM X 300MM. FOLDING LENGTH: 100MM TO 210MM. VARIABLE SPEED DRIVE. INCH BUTTON. ARGUS LAETUS 3 CODER. AIR CONSUMPTION (WITH LEAFLET): 5-8 NM3/H. 220/380V/50HZ/4,0KW. MACHINE SIZE: 2500MM X 1500MM X 1800MM HIGH, APPROX. WEIGHT 1500KG
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-make unknown, floorspace 3,0x0,4 m, total height 0,7 m, horizontal conveyor screw (1x), material stainless steel , diameter 150mm, length 2000mm, shaft diameter 50mm, pitch 150mm, outlet dia. 150mm, with adjustable packing glands , motor 0,75 kwhorizontal conveyor screwsconveyor screws > horizontal conveyor screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, FLOORSPACE 3,0X0,4 M, TOTAL HEIGHT 0,7 M, HORIZONTAL CONVEYOR SCREW (1X), MATERIAL STAINLESS STEEL , DIAMETER 150MM, LENGTH 2000MM, SHAFT DIAMETER 50MM, PITCH 150MM, OUTLET DIA. 150MM, WITH ADJUSTABLE PACKING GLANDS , MOTOR 0,75 KWHORIZONTAL CONVEYOR SCREWSCONVEYOR SCREWS > HORIZONTAL CONVEYOR SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 30.000 GBP
Ubicación: Land-compact design, self-adhesive label applicator for small bottles, vials and ampoules with average output of 36,000 containers per hour (60 per minute, depending on container size and type).

suitable for the following bottle and label sizes:
bottle Ø 16mm-100mm, bottle height 35mm-160mm
label length 20mm-150mm, label height 15mm-80mm

comes with 5 sets of change parts and was previously used for the following products: ampoules 1-2ml, 5ml, 10ml and vials 2ml, 5ml, 10ml.

this machine has been upgraded and modified to current pharma grade production standards.

delta elektronik cd1 servo drive/positioner for controlling the motor torque and speed.

laetus luminescence sensor lumat 920 m with camera system. camera system by vision automation a/s installed on machine (camera system manufacturer web site http://www.visionautomation.dk/).

allen coder.

220/380v, 2kw, 50hz, 24volt.

manuals partially in german, danish & english and includes electrical diagrams.

machine sizes:
labeller 2100mm x 2000mm x 2000mm high, approx weight 20kg
control panel  2000mm x 1500mm x 2100mm high, approx weight 100kg

excellent condition - working when removed from production COMPACT DESIGN, SELF-ADHESIVE LABEL APPLICATOR FOR SMALL BOTTLES, VIALS AND AMPOULES WITH AVERAGE OUTPUT OF 36,000 CONTAINERS PER HOUR (60 PER MINUTE, DEPENDING ON CONTAINER SIZE AND TYPE). SUITABLE FOR THE FOLLOWING BOTTLE AND LABEL SIZES: BOTTLE Ø 16MM-100MM, BOTTLE HEIGHT 35MM-160MM LABEL LENGTH 20MM-150MM, LABEL HEIGHT 15MM-80MM COMES WITH 5 SETS OF CHANGE PARTS AND WAS PREVIOUSLY USED FOR THE FOLLOWING PRODUCTS: AMPOULES 1-2ML, 5ML, 10ML AND VIALS 2ML, 5ML, 10ML. THIS MACHINE HAS BEEN UPGRADED AND MODIFIED TO CURRENT PHARMA GRADE PRODUCTION STANDARDS. DELTA ELEKTRONIK CD1 SERVO DRIVE/POSITIONER FOR CONTROLLING THE MOTOR TORQUE AND SPEED. LAETUS LUMINESCENCE SENSOR LUMAT 920 M WITH CAMERA SYSTEM. CAMERA SYSTEM BY VISION AUTOMATION A/S INSTALLED ON MACHINE (CAMERA SYSTEM MANUFACTURER WEB SITE HTTP://WWW.VISIONAUTOMATION.DK/). ALLEN CODER. 220/380V, 2KW, 50HZ, 24VOLT. MANUALS PARTIALLY IN GERMAN, DANISH & ENGLISH AND INCLUDES ELECTRICAL DIAGRAMS. MACHINE SIZES: LABELLER 2100MM X 2000MM X 2000MM HIGH, APPROX WEIGHT 20KG CONTROL PANEL 2000MM X 1500MM X 2100MM HIGH, APPROX WEIGHT 100KG EXCELLENT CONDITION - WORKING WHEN REMOVED FROM PRODUCTION
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-make unknown, with switch , floorspace 0,5x0,4 m, total height 0,6 m, metering screw (1x), material stainless steel , plastic screw, screw diameter 25mm, screw length 150mm, with hopper , inlet 390x410mm, with motor , screw speed variablemetering screwsconveyor screws > metering screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, WITH SWITCH , FLOORSPACE 0,5X0,4 M, TOTAL HEIGHT 0,6 M, METERING SCREW (1X), MATERIAL STAINLESS STEEL , PLASTIC SCREW, SCREW DIAMETER 25MM, SCREW LENGTH 150MM, WITH HOPPER , INLET 390X410MM, WITH MOTOR , SCREW SPEED VARIABLEMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-chriwa minimal water treatment  (150m3/hr)machine list	
			
1	chriwa	water treatment-chriwa
2	chriwa	water treatment receiving station
3	chriwa	water treat cub turbidity monitor s2
4	chriwa	water treat cub sand filter 1 chriwa asy s2
5	chriwa	water treat cub sand filter 2 chriwa asy s2
6	chriwa	water treat cub sand filter 3 chriwa asy s2
7	chriwa	water treat cub sand filter  pipings & acc s2
8	chriwa	water treat cub air blower s2
9	chriwa	water treat cub backwash pump s2
10	chriwa	water treat cub semi treated pump 1 s2
11	chriwa	water treat cub  semi treated pump 2 s2
12	chriwa	water treat cub sand filter control panel s2
13	chriwa	major equipment cub raw water receiving area
14	chriwa	water treat cub receiving bisulfite dosing s2
15	chriwa	water treat cub receiving chlorine dosing stn s2
16	chriwa	water treat cub receiving pipings & accessories s2
17	chriwa	water treat cub receiving area pump 1 s2
18	chriwa	water treat cub receiving area pump 2  s2
19	chriwa	water treat cub receiving area pump 3  s2
20	chriwa	water treat cub receiving area pump 4  s2
21	chriwa	water treat cub receiving area pump 5  s2
22	chriwa	water treat cub receiving area pump 6  cl tower s2
23	chriwa	water treat cub receiving area pump 7 co2 s2
24	chriwa	water treat cub receiving area control panel s2
25	chriwa	water treat caustic dosing asy for s2
26	chriwa	water treat heat exchanger for s2
27	chriwa	water treat carbon filter 1 assy for s2
28	chriwa	water treat carbon filter 2 assy for s2
29	chriwa	water treat carbon filter 3 assy for s2
30	chriwa	water treat carbon fil pipings & acc for s2
31	chriwa	water treat filter rec one bag for s2
32	chriwa	water treat rec pipings&acc for s2
33	chriwa	water treat filter rec 20 microns for s2
34	chriwa	water treat polisher 1-3 10 mic for s2
35	chriwa	water treat polisher 2-5 1 mic for s2
36	chriwa	water treat polisher 6-8 1 mic for s2
37	chriwa	water treat backwash rec pump1 for s2
38	chriwa	water treat backwash rec pump2 for s2
39	chriwa	water treat rinser water pump 1 for s2
40	chriwa	water treat rinser water pump 2 for s2
41	chriwa	water treat treatedwater booster pump 1 for s2
42	chriwa	water treat treatedwater booster pump 2 for s2
43	chriwa	water treat plant panel  for s2
44	chriwa	water treat rinser tank asy for s2
45	chriwa	water treat rins tnk pping&acc for s2
46	chriwa	water treat storage tank chriwa for s2
47	hanovia	water treat hanovia uv lamp sys 2 asy for s2
48	hanovia	water treatment uv hanovia ctrl panel for s2
49	hanovia	water treatment uv hanovia sleeve quartz for s2
50	hanovia	water treat hanovia uv lamp sys  2 asy for s2
51	hanovia	water treatment hanovia ctrl panel for s2
52	hanovia	water treatment uv hanovia sleeve quartz for s2
53	hanovia	water treat hanovia uv paa for s2
54		waste water pump control panel for s2
55		waste water pump safety supervision for s2
56		waste water submersible pump for s2
 CHRIWA MINIMAL WATER TREATMENT (150M3/HR)MACHINE LIST 1 CHRIWA WATER TREATMENT-CHRIWA 2 CHRIWA WATER TREATMENT RECEIVING STATION 3 CHRIWA WATER TREAT CUB TURBIDITY MONITOR S2 4 CHRIWA WATER TREAT CUB SAND FILTER 1 CHRIWA ASY S2 5 CHRIWA WATER TREAT CUB SAND FILTER 2 CHRIWA ASY S2 6 CHRIWA WATER TREAT CUB SAND FILTER 3 CHRIWA ASY S2 7 CHRIWA WATER TREAT CUB SAND FILTER PIPINGS & ACC S2 8 CHRIWA WATER TREAT CUB AIR BLOWER S2 9 CHRIWA WATER TREAT CUB BACKWASH PUMP S2 10 CHRIWA WATER TREAT CUB SEMI TREATED PUMP 1 S2 11 CHRIWA WATER TREAT CUB SEMI TREATED PUMP 2 S2 12 CHRIWA WATER TREAT CUB SAND FILTER CONTROL PANEL S2 13 CHRIWA MAJOR EQUIPMENT CUB RAW WATER RECEIVING AREA 14 CHRIWA WATER TREAT CUB RECEIVING BISULFITE DOSING S2 15 CHRIWA WATER TREAT CUB RECEIVING CHLORINE DOSING STN S2 16 CHRIWA WATER TREAT CUB RECEIVING PIPINGS & ACCESSORIES S2 17 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 1 S2 18 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 2 S2 19 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 3 S2 20 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 4 S2 21 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 5 S2 22 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 6 CL TOWER S2 23 CHRIWA WATER TREAT CUB RECEIVING AREA PUMP 7 CO2 S2 24 CHRIWA WATER TREAT CUB RECEIVING AREA CONTROL PANEL S2 25 CHRIWA WATER TREAT CAUSTIC DOSING ASY FOR S2 26 CHRIWA WATER TREAT HEAT EXCHANGER FOR S2 27 CHRIWA WATER TREAT CARBON FILTER 1 ASSY FOR S2 28 CHRIWA WATER TREAT CARBON FILTER 2 ASSY FOR S2 29 CHRIWA WATER TREAT CARBON FILTER 3 ASSY FOR S2 30 CHRIWA WATER TREAT CARBON FIL PIPINGS & ACC FOR S2 31 CHRIWA WATER TREAT FILTER REC ONE BAG FOR S2 32 CHRIWA WATER TREAT REC PIPINGS&ACC FOR S2 33 CHRIWA WATER TREAT FILTER REC 20 MICRONS FOR S2 34 CHRIWA WATER TREAT POLISHER 1-3 10 MIC FOR S2 35 CHRIWA WATER TREAT POLISHER 2-5 1 MIC FOR S2 36 CHRIWA WATER TREAT POLISHER 6-8 1 MIC FOR S2 37 CHRIWA WATER TREAT BACKWASH REC PUMP1 FOR S2 38 CHRIWA WATER TREAT BACKWASH REC PUMP2 FOR S2 39 CHRIWA WATER TREAT RINSER WATER PUMP 1 FOR S2 40 CHRIWA WATER TREAT RINSER WATER PUMP 2 FOR S2 41 CHRIWA WATER TREAT TREATEDWATER BOOSTER PUMP 1 FOR S2 42 CHRIWA WATER TREAT TREATEDWATER BOOSTER PUMP 2 FOR S2 43 CHRIWA WATER TREAT PLANT PANEL FOR S2 44 CHRIWA WATER TREAT RINSER TANK ASY FOR S2 45 CHRIWA WATER TREAT RINS TNK PPING&ACC FOR S2 46 CHRIWA WATER TREAT STORAGE TANK CHRIWA FOR S2 47 HANOVIA WATER TREAT HANOVIA UV LAMP SYS 2 ASY FOR S2 48 HANOVIA WATER TREATMENT UV HANOVIA CTRL PANEL FOR S2 49 HANOVIA WATER TREATMENT UV HANOVIA SLEEVE QUARTZ FOR S2 50 HANOVIA WATER TREAT HANOVIA UV LAMP SYS 2 ASY FOR S2 51 HANOVIA WATER TREATMENT HANOVIA CTRL PANEL FOR S2 52 HANOVIA WATER TREATMENT UV HANOVIA SLEEVE QUARTZ FOR S2 53 HANOVIA WATER TREAT HANOVIA UV PAA FOR S2 54 WASTE WATER PUMP CONTROL PANEL FOR S2 55 WASTE WATER PUMP SAFETY SUPERVISION FOR S2 56 WASTE WATER SUBMERSIBLE PUMP FOR S2
Vendedor: Pennington (UK) Ltd
Año de construcción: usado
Ubicación: Land-internal diameter:300 mm<br/>grinding depth: mm<br/>swing diameter:300/350 mm<br/>workpiece length - max.:2300 mm<br/>table rotating:-2/+6 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:400 (fliegend, 150mm von der spindelnase) kg<br/>workhead - center taper:6 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:11 kw<br/>coolant pump:2,2 kw<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:350 (selbst zentrierend) mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:auf anfrage <br/>internal grinding spindle:auf anfrage <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:300 MM
GRINDING DEPTH: MM
SWING DIAMETER:300/350 MM
WORKPIECE LENGTH - MAX.:2300 MM
TABLE ROTATING:-2/+6 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:400 (FLIEGEND, 150MM VON DER SPINDELNASE) KG
WORKHEAD - CENTER TAPER:6 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:11 KW
COOLANT PUMP:2,2 KW
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:350 (SELBST ZENTRIEREND) MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BOY types: