56 ofertas

Año de construcción: usado
Ubicación: Land-injection molding machine
manufacturer: boy
type: 80 t2
year of construction: 1990

more data, please refer to the attached data sheet in the appendix.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  INJECTION MOLDING MACHINE MANUFACTURER: BOY TYPE: 80 T2 YEAR OF CONSTRUCTION: 1990 MORE DATA, PLEASE REFER TO THE ATTACHED DATA SHEET IN THE APPENDIX. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-doboy packaging machine, type: sw100w, serial number: 855418, year of construction: 1992, 220/380 v, 3 ph, 50 hz, 6 a, belt width: (4x) 80 mm, total dimensions: 2500 mm x 1700 mm x 2000 mm, including extra film roll holder. technical condition unknown. DOBOY PACKAGING MACHINE, TYPE: SW100W, SERIAL NUMBER: 855418, YEAR OF CONSTRUCTION: 1992, 220/380 V, 3 PH, 50 HZ, 6 A, BELT WIDTH: (4X) 80 MM, TOTAL DIMENSIONS: 2500 MM X 1700 MM X 2000 MM, INCLUDING EXTRA FILM ROLL HOLDER. TECHNICAL CONDITION UNKNOWN.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 1.290 €
Ubicación: Land-horizontal injection molding machine boy15s
power 5,5 kw
maximum pressure 140 bar
weight 700 kg
built in 1978

to give due to production
 HORIZONTAL INJECTION MOLDING MACHINE BOY15S POWER 5,5 KW MAXIMUM PRESSURE 140 BAR WEIGHT 700 KG BUILT IN 1978 TO GIVE DUE TO PRODUCTION
Vendedor: Maschinendrehpunkt
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 2000 x 700 x 400 mm<br/>description: lifting height max. 30 m, lifting speed 19 m/min, nominal load 200 kg, rope diameter 5 mm, nominal strength 1960 n/mm², power 0,75 kw WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 700 X 400 MM
DESCRIPTION: LIFTING HEIGHT MAX. 30 M, LIFTING SPEED 19 M/MIN, NOMINAL LOAD 200 KG, ROPE DIAMETER 5 MM, NOMINAL STRENGTH 1960 N/MM², POWER 0,75 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-boy 22av / hours: 208! / machine like new
year of construction: 2005

injection unit:
screw diameter: 24 mm
shot weight: 34.08 g
injection pressure: 1455 bar
dispensing volume: 36 cc

clamping unit:
clamping force: 22 tons
tie bar clearance: 254 mm
clamping plate sizes: 400 x 200 mm
ejector: hydraulic
clamping unit: hydraulic

control: procan ct - touch control / monitor

additional equipment:
machine like new
hours of operation: 208!
air valve x 2
injection unit cured - bi

dimensions:
weight: 860 kg
length/width/height: 1.89 x 0.81 x 2.94 m

drive:
pump/motor: 5.5 kw
heating capacity: 5.8 kw
cylinder heating: 11.3 kw

price: on request BOY 22AV / HOURS: 208! / MACHINE LIKE NEW YEAR OF CONSTRUCTION: 2005 INJECTION UNIT: SCREW DIAMETER: 24 MM SHOT WEIGHT: 34.08 G INJECTION PRESSURE: 1455 BAR DISPENSING VOLUME: 36 CC CLAMPING UNIT: CLAMPING FORCE: 22 TONS TIE BAR CLEARANCE: 254 MM CLAMPING PLATE SIZES: 400 X 200 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: PROCAN CT - TOUCH CONTROL / MONITOR ADDITIONAL EQUIPMENT: MACHINE LIKE NEW HOURS OF OPERATION: 208! AIR VALVE X 2 INJECTION UNIT CURED - BI DIMENSIONS: WEIGHT: 860 KG LENGTH/WIDTH/HEIGHT: 1.89 X 0.81 X 2.94 M DRIVE: PUMP/MOTOR: 5.5 KW HEATING CAPACITY: 5.8 KW CYLINDER HEATING: 11.3 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: 18.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-boy 35a / hours of operation: 34.356
year of construction: 2004

injection unit:
screw diameter: 28 mm
shot weight: 55.8 g
injection pressure: 1577 bar
dosing volume: 58.5 ccm

clamping unit:
clamping force: 35 tons
tie bar distance: 280 x 254 mm
clamping plate sizes: 425 x 400 mm
ejector: hydraulic
clamping unit: hydraulic

control: procan ct - touch control / monitor

additional equipment:
euromap 12
robot interface
air valve x 2
hydraulic core pulling x 1
wittmann - brand water batteries x 4

dimensions:
weight: 1604 kg
length/width/height: 2.38 x 0.88 x 1.89 m

drive:
pump/motor: 7.5 kw
heating capacity: 2.45 kw
cylinder heating: 9.95 kw

price: on request BOY 35A / HOURS OF OPERATION: 34.356 YEAR OF CONSTRUCTION: 2004 INJECTION UNIT: SCREW DIAMETER: 28 MM SHOT WEIGHT: 55.8 G INJECTION PRESSURE: 1577 BAR DOSING VOLUME: 58.5 CCM CLAMPING UNIT: CLAMPING FORCE: 35 TONS TIE BAR DISTANCE: 280 X 254 MM CLAMPING PLATE SIZES: 425 X 400 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: PROCAN CT - TOUCH CONTROL / MONITOR ADDITIONAL EQUIPMENT: EUROMAP 12 ROBOT INTERFACE AIR VALVE X 2 HYDRAULIC CORE PULLING X 1 WITTMANN - BRAND WATER BATTERIES X 4 DIMENSIONS: WEIGHT: 1604 KG LENGTH/WIDTH/HEIGHT: 2.38 X 0.88 X 1.89 M DRIVE: PUMP/MOTOR: 7.5 KW HEATING CAPACITY: 2.45 KW CYLINDER HEATING: 9.95 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-boy 55a
year of construction: 2003

injection unit:
screw diameter: 32 mm
shot weight: 87.8 g
injection pressure: 2127 bar
dosing volume: 96.5 ccm

clamping unit:
clamping force: 55 t
tie bar distance: 360 x 335 mm
size of the clamping plates: 540 x 565 mm
ejector: hydraulic
clamping unit: hydraulic

control: procan - touch control / monitor

additional equipment:
injection unit cured - bi

dimensions:
weight: 2430 kg
length/width/height: 3.25 x 1.03 x 2.02 m

price: on request BOY 55A YEAR OF CONSTRUCTION: 2003 INJECTION UNIT: SCREW DIAMETER: 32 MM SHOT WEIGHT: 87.8 G INJECTION PRESSURE: 2127 BAR DOSING VOLUME: 96.5 CCM CLAMPING UNIT: CLAMPING FORCE: 55 T TIE BAR DISTANCE: 360 X 335 MM SIZE OF THE CLAMPING PLATES: 540 X 565 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: PROCAN - TOUCH CONTROL / MONITOR ADDITIONAL EQUIPMENT: INJECTION UNIT CURED - BI DIMENSIONS: WEIGHT: 2430 KG LENGTH/WIDTH/HEIGHT: 3.25 X 1.03 X 2.02 M PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 580 €
Ubicación: Land-it is a used mussana cream machine boy - 4 litres for sale. the machine is functional. a service has been performed, defective parts are renewed.  IT IS A USED MUSSANA CREAM MACHINE BOY - 4 LITRES FOR SALE. THE MACHINE IS FUNCTIONAL. A SERVICE HAS BEEN PERFORMED, DEFECTIVE PARTS ARE RENEWED.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-ausstattung<br/>langlebige, mit profilschliff versehene walzen aus gehärtetem stahl<br/>antrieb der walzen untereinander durch zahnräder für ein gleichbleibend gutes quetschergebins und geringe feinanteile<br/>einfach und schnell zu bedienende stufenlose verstellung des walzenabstands<br/>skala zur bestimmung des quetschspalts<br/>korrosionsbeständiges gehäuse aus verzinktem stahl und robuster hammerschlaglackierung<br/>dosierschieber<br/>magnet im zulauf<br/>fremdkörperauswerfer<br/>eingriffschutz oben und unten <br/>id5397 AUSSTATTUNG
LANGLEBIGE, MIT PROFILSCHLIFF VERSEHENE WALZEN AUS GEHäRTETEM STAHL
ANTRIEB DER WALZEN UNTEREINANDER DURCH ZAHNRäDER FüR EIN GLEICHBLEIBEND GUTES QUETSCHERGEBINS UND GERINGE FEINANTEILE
EINFACH UND SCHNELL ZU BEDIENENDE STUFENLOSE VERSTELLUNG DES WALZENABSTANDS
SKALA ZUR BESTIMMUNG DES QUETSCHSPALTS
KORROSIONSBESTäNDIGES GEHäUSE AUS VERZINKTEM STAHL UND ROBUSTER HAMMERSCHLAGLACKIERUNG
DOSIERSCHIEBER
MAGNET IM ZULAUF
FREMDKöRPERAUSWERFER
EINGRIFFSCHUTZ OBEN UND UNTEN
ID5397
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-pritzgiessmaschine boy 30 m year 2000 with 18 auger and only 32.000 h operating hours PRITZGIESSMASCHINE BOY 30 M YEAR 2000 WITH 18 AUGER AND ONLY 32.000 H OPERATING HOURS
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 9.000 EU?
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-no temperature fluctuation
evenly glaze
digital control panel
low heat-up time NO TEMPERATURE FLUCTUATION EVENLY GLAZE DIGITAL CONTROL PANEL LOW HEAT-UP TIME
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-screw size: 28 mm<br/>injection shot weight in polysterol: 53,2 g/ps<br/>closing pressure: 87 kn<br/>cylinder head volume: 58,5 ccm<br/>injection pressure: 1405 bar<br/>worm stroke: 95 mm<br/>max. torque: 180 nm<br/>closing pressure: 500 kn<br/>tie bars distance: 360 x 335 mm<br/>control: alpha <br/>total power requirement: 18,6 kw<br/>weight of the machine ca.: 2,38 t<br/>dimensions of the machine ca.: 3,2 x 1,13 x 2,04 m<br/>operating hours: 5.900 h<br/>the machine is in very good condition.<br/><br/><br/><br/><br/> SCREW SIZE: 28 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 53,2 G/PS
CLOSING PRESSURE: 87 KN
CYLINDER HEAD VOLUME: 58,5 CCM
INJECTION PRESSURE: 1405 BAR
WORM STROKE: 95 MM
MAX. TORQUE: 180 NM
CLOSING PRESSURE: 500 KN
TIE BARS DISTANCE: 360 X 335 MM
CONTROL: ALPHA
TOTAL POWER REQUIREMENT: 18,6 KW
WEIGHT OF THE MACHINE CA.: 2,38 T
DIMENSIONS OF THE MACHINE CA.: 3,2 X 1,13 X 2,04 M
OPERATING HOURS: 5.900 H
THE MACHINE IS IN VERY GOOD CONDITION.




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-boy 55a
year of construction: 2003

injection unit:
screw diameter: 32 mm
shot weight: 87.8 g
injection pressure: 2127 bar
dosing volume: 96.5 ccm

clamping unit:
clamping force: 55 t
tie bar distance: 360 x 335 mm
size of the clamping plates: 540 x 565 mm
ejector: hydraulic
clamping unit: hydraulic

control: procan - touch control / monitor

additional equipment:
injection unit cured - bi

dimensions:
weight: 2430 kg
length/width/height: 3.25 x 1.03 x 2.02 m

price: on request
BOY 55A YEAR OF CONSTRUCTION: 2003 INJECTION UNIT: SCREW DIAMETER: 32 MM SHOT WEIGHT: 87.8 G INJECTION PRESSURE: 2127 BAR DOSING VOLUME: 96.5 CCM CLAMPING UNIT: CLAMPING FORCE: 55 T TIE BAR DISTANCE: 360 X 335 MM SIZE OF THE CLAMPING PLATES: 540 X 565 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: PROCAN - TOUCH CONTROL / MONITOR ADDITIONAL EQUIPMENT: INJECTION UNIT CURED - BI DIMENSIONS: WEIGHT: 2430 KG LENGTH/WIDTH/HEIGHT: 3.25 X 1.03 X 2.02 M PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-screw size: 28 mm<br/>injection shot weight in polysterol: 53,2 g/ps<br/>closing pressure: 87 kn<br/>cylinder head volume: 58,5 ccm<br/>injection pressure: 1405 bar<br/>worm stroke: 95 mm<br/>max. torque: 180 nm<br/>closing pressure: 500 kn<br/>tie bars distance: 360 x 335 mm<br/>control: alpha <br/>total power requirement: 18,6 kw<br/>weight of the machine ca.: 2,38 t<br/>dimensions of the machine ca.: 3,2 x 1,13 x 2,04 m<br/>operating hours: 7.644 h<br/>the machine is in very good condition.<br/><br/><br/><br/><br/> SCREW SIZE: 28 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 53,2 G/PS
CLOSING PRESSURE: 87 KN
CYLINDER HEAD VOLUME: 58,5 CCM
INJECTION PRESSURE: 1405 BAR
WORM STROKE: 95 MM
MAX. TORQUE: 180 NM
CLOSING PRESSURE: 500 KN
TIE BARS DISTANCE: 360 X 335 MM
CONTROL: ALPHA
TOTAL POWER REQUIREMENT: 18,6 KW
WEIGHT OF THE MACHINE CA.: 2,38 T
DIMENSIONS OF THE MACHINE CA.: 3,2 X 1,13 X 2,04 M
OPERATING HOURS: 7.644 H
THE MACHINE IS IN VERY GOOD CONDITION.




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-3 dental units with lots of accessories for sale 2 cabinets with drawers full of tools, all 3 together for â?¬7500 net ex warehouse including everything you see on the pictures.

* 2 dental units kavo estetica 1042 * 1 dental unit isodent g
* may 1 kavo unit line 5 piece - "domino" incl. instruments & small equipment
* may 1 baisch device line 2 piece set - incl. instruments & small equipment
* 1 4 piece appliance line
* 1 saugmaschiene dã¼rr
* 1 compressor dã¼rr - "boy"
* 1 heiã?luftsteri - melag
* 1 dentaclave d by dentares

a visit is possible in our warehouse. 3 DENTAL UNITS WITH LOTS OF ACCESSORIES FOR SALE 2 CABINETS WITH DRAWERS FULL OF TOOLS, ALL 3 TOGETHER FOR &ACIRC;?&NOT;7500 NET EX WAREHOUSE INCLUDING EVERYTHING YOU SEE ON THE PICTURES. * 2 DENTAL UNITS KAVO ESTETICA 1042 * 1 DENTAL UNIT ISODENT G * MAY 1 KAVO UNIT LINE 5 PIECE - "DOMINO" INCL. INSTRUMENTS & SMALL EQUIPMENT * MAY 1 BAISCH DEVICE LINE 2 PIECE SET - INCL. INSTRUMENTS & SMALL EQUIPMENT * 1 4 PIECE APPLIANCE LINE * 1 SAUGMASCHIENE D&ATILDE;&FRAC14;RR * 1 COMPRESSOR D&ATILDE;&FRAC14;RR - "BOY" * 1 HEI&ATILDE;?LUFTSTERI - MELAG * 1 DENTACLAVE D BY DENTARES A VISIT IS POSSIBLE IN OUR WAREHOUSE.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-carrying capacity: 500 kg<br/>number of suction cups: 4-8 stk<br/>suction cup dia.: 130 mm<br/>dimensions: 2800 x 900 mm<br/>workpiece sizes: min. 1000 x 600 mm<br/>workpiece sizes: max. 4000 x 2000 u/min<br/>weight of the machine ca.: 90 kg<br/><br/><br/><br/><br/> CARRYING CAPACITY: 500 KG
NUMBER OF SUCTION CUPS: 4-8 STK
SUCTION CUP DIA.: 130 MM
DIMENSIONS: 2800 X 900 MM
WORKPIECE SIZES: MIN. 1000 X 600 MM
WORKPIECE SIZES: MAX. 4000 X 2000 U/MIN
WEIGHT OF THE MACHINE CA.: 90 KG




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Precio: 20.450 £
Ubicación: Land-newly refurbished is this boy 90a manufactured in 2007 and has only 34400 run hours on the clock.  the procan ct controller has proven to be very popular for dr. boy and the current control systems offered have evolved from the original procan control.  additional features/options with this machine include;  robot interface,  dega hopper loader with hp92 controller & virgin/regrind dosing unit and a color-exact masterbatch unit with dega loader complete with pixie controller.

as with all machines sold by stv machinery, the machine will be fully refurbished so age and run hours are not a fair representation of the machines condition. come in and take a closer look to really inspect the condition and we can go through all of our work done on the machine.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free. NEWLY REFURBISHED IS THIS BOY 90A MANUFACTURED IN 2007 AND HAS ONLY 34400 RUN HOURS ON THE CLOCK. THE PROCAN CT CONTROLLER HAS PROVEN TO BE VERY POPULAR FOR DR. BOY AND THE CURRENT CONTROL SYSTEMS OFFERED HAVE EVOLVED FROM THE ORIGINAL PROCAN CONTROL. ADDITIONAL FEATURES/OPTIONS WITH THIS MACHINE INCLUDE; ROBOT INTERFACE, DEGA HOPPER LOADER WITH HP92 CONTROLLER & VIRGIN/REGRIND DOSING UNIT AND A COLOR-EXACT MASTERBATCH UNIT WITH DEGA LOADER COMPLETE WITH PIXIE CONTROLLER. AS WITH ALL MACHINES SOLD BY STV MACHINERY, THE MACHINE WILL BE FULLY REFURBISHED SO AGE AND RUN HOURS ARE NOT A FAIR REPRESENTATION OF THE MACHINES CONDITION. COME IN AND TAKE A CLOSER LOOK TO REALLY INSPECT THE CONDITION AND WE CAN GO THROUGH ALL OF OUR WORK DONE ON THE MACHINE. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-roll diameter: na mm<br/>throat: na mm<br/>workpiece height:  mm<br/>working area: 200 mm<br/>workpiece dia.: 200 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>bandsaw for butcher<br/><br/><br/><br/><br/> ROLL DIAMETER: NA MM
THROAT: NA MM
WORKPIECE HEIGHT: MM
WORKING AREA: 200 MM
WORKPIECE DIA.: 200 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BANDSAW FOR BUTCHER




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 19.250 £
Ubicación: Land-newly refurbished, boy 90a, originally manufactured 2005 with recorded run hours of 45500.  the machine is equipped with the procan ct controller and other options include; robot interface, dega hopper loader with hp92 controller, virgin/regrind dosing unit and color-exact masterbatch unit with dega loader with pixie controller.

as with all machines sold by stv machinery, the machine will be fully refurbished so age and run hours are not a fair representation of the machines condition.  come in and take a closer look to really inspect the condition and we can go through all of our work done on the machine.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.    NEWLY REFURBISHED, BOY 90A, ORIGINALLY MANUFACTURED 2005 WITH RECORDED RUN HOURS OF 45500. THE MACHINE IS EQUIPPED WITH THE PROCAN CT CONTROLLER AND OTHER OPTIONS INCLUDE; ROBOT INTERFACE, DEGA HOPPER LOADER WITH HP92 CONTROLLER, VIRGIN/REGRIND DOSING UNIT AND COLOR-EXACT MASTERBATCH UNIT WITH DEGA LOADER WITH PIXIE CONTROLLER. AS WITH ALL MACHINES SOLD BY STV MACHINERY, THE MACHINE WILL BE FULLY REFURBISHED SO AGE AND RUN HOURS ARE NOT A FAIR REPRESENTATION OF THE MACHINES CONDITION. COME IN AND TAKE A CLOSER LOOK TO REALLY INSPECT THE CONDITION AND WE CAN GO THROUGH ALL OF OUR WORK DONE ON THE MACHINE. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-capacity: kg/h<br/>required air-pressure:8 bar<br/>weight of the machine ca.:27 kg<br/>container volume:24 l<br/>dimensions of the machine ca.:600 x 400 x 950 mm<br/><br/> CAPACITY: KG/H
REQUIRED AIR-PRESSURE:8 BAR
WEIGHT OF THE MACHINE CA.:27 KG
CONTAINER VOLUME:24 L
DIMENSIONS OF THE MACHINE CA.:600 X 400 X 950 MM

Vendedor: Pagus Maschinenhandel
Año de construcción: usado
Ubicación: Land-injection molding machine
manufacturer: boy
type: 22s
year of construction: 1992
more data see nameplate

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)    INJECTION MOLDING MACHINE MANUFACTURER: BOY TYPE: 22S YEAR OF CONSTRUCTION: 1992 MORE DATA SEE NAMEPLATE CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-injection molding machine
manufacturer: boy
type: 22s
year of construction: 1991
more data see nameplate

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  INJECTION MOLDING MACHINE MANUFACTURER: BOY TYPE: 22S YEAR OF CONSTRUCTION: 1991 MORE DATA SEE NAMEPLATE CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 500 €
Ubicación: Land-description
brand	n/a
id	30077
status	active
price	500 € + vat
location	oradea (ro)

stainless steel butcher work table for cutting / deboning meat. the polyethylene tops are missing. dimensions: (l x l x h): 2800 x 1200 x 980 mm. two pieces available, price is per piece. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND N/A ID 30077 STATUS ACTIVE PRICE 500 € + VAT LOCATION ORADEA (RO) STAINLESS STEEL BUTCHER WORK TABLE FOR CUTTING / DEBONING MEAT. THE POLYETHYLENE TOPS ARE MISSING. DIMENSIONS: (L X L X H): 2800 X 1200 X 980 MM. TWO PIECES AVAILABLE, PRICE IS PER PIECE. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-injection molding machine boy 50 t2
year of construction: 1991
clamping force: 500 kn
closing force: 25.7 kn
opening stroke: 50.2 kn
bdh7j07sjb
fork leg diameter: 55 mm
screw diameter: 28 mm
shot weight: 62 g INJECTION MOLDING MACHINE BOY 50 T2 YEAR OF CONSTRUCTION: 1991 CLAMPING FORCE: 500 KN CLOSING FORCE: 25.7 KN OPENING STROKE: 50.2 KN BDH7J07SJB FORK LEG DIAMETER: 55 MM SCREW DIAMETER: 28 MM SHOT WEIGHT: 62 G
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine boy 80 t2
yrwv30
year of construction: 1990
clamping force: 805 kn
closing force: 32.5 kn
opening stroke: 60,3 kn
fork leg diameter: 63 mm
screw diameter: 36 mm INJECTION MOLDING MACHINE BOY 80 T2 YRWV30 YEAR OF CONSTRUCTION: 1990 CLAMPING FORCE: 805 KN CLOSING FORCE: 32.5 KN OPENING STROKE: 60,3 KN FORK LEG DIAMETER: 63 MM SCREW DIAMETER: 36 MM
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 8.950 £
Ubicación: Land-id: 4285
manufacturer: boy
model: 22d
viewing: not yet refurbished
condition: refurbished with guarantee
year: 2000
clamp force (t): 22
control system: dipronic
lead time: 6 weeks from order
in production: no
location: wellingborough

we have in our workshop and awaiting refurbishment this boy 22d.  the machine is a compact 22 tonne clamp machine with a very easy to use controller with the dipronic system.  these machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

*please note that the video is of a previously refurbished boy 22d but is near identical to this one* ID: 4285 MANUFACTURER: BOY MODEL: 22D VIEWING: NOT YET REFURBISHED CONDITION: REFURBISHED WITH GUARANTEE YEAR: 2000 CLAMP FORCE (T): 22 CONTROL SYSTEM: DIPRONIC LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: NO LOCATION: WELLINGBOROUGH WE HAVE IN OUR WORKSHOP AND AWAITING REFURBISHMENT THIS BOY 22D. THE MACHINE IS A COMPACT 22 TONNE CLAMP MACHINE WITH A VERY EASY TO USE CONTROLLER WITH THE DIPRONIC SYSTEM. THESE MACHINES HAVE STOOD THE TEST OF TIME AND REMAIN VERY POPULAR AS THEY ARE SIMPLE TO USE, CHEAP TO REPAIR AND RELIABLE. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THEN PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. *PLEASE NOTE THAT THE VIDEO IS OF A PREVIOUSLY REFURBISHED BOY 22D BUT IS NEAR IDENTICAL TO THIS ONE*
Vendedor: STVmachinery
Año de construcción: usado
Precio: 14.750 £
Ubicación: Land-id: 4452
manufacturer: boy
model: 80m
viewing: not yet refurbished
condition: refurbished with guarantee
clamp force (t): 80
control system: procan
lead time: 6 weeks from order
in production: no

boy 80 tonne clamp machine with procan controller.  it is in our workshop in wellingborough and awaiting the royal stv machinery refurbishment treatment.  we’re happy to show visitors refurbished examples of machinery and a tour of the workshop where we can go through the process in detail.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

*please note that the video is of a previously refurbished boy 80m but is near identical to this one* ID: 4452 MANUFACTURER: BOY MODEL: 80M VIEWING: NOT YET REFURBISHED CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 80 CONTROL SYSTEM: PROCAN LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: NO BOY 80 TONNE CLAMP MACHINE WITH PROCAN CONTROLLER. IT IS IN OUR WORKSHOP IN WELLINGBOROUGH AND AWAITING THE ROYAL STV MACHINERY REFURBISHMENT TREATMENT. WE’RE HAPPY TO SHOW VISITORS REFURBISHED EXAMPLES OF MACHINERY AND A TOUR OF THE WORKSHOP WHERE WE CAN GO THROUGH THE PROCESS IN DETAIL. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THEN PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. *PLEASE NOTE THAT THE VIDEO IS OF A PREVIOUSLY REFURBISHED BOY 80M BUT IS NEAR IDENTICAL TO THIS ONE*
Vendedor: STVmachinery
Año de construcción: usado
Precio: 14.750 £
Ubicación: Land-id: 4453
manufacturer: boy
model: 80m
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 80
control system: procan
lead time: 6 weeks from order
in production: no
location: wellingborough

we do like boy’s here at stv machinery and adding to our collection that are currently awaiting refurbishment is this 80 tonne clamp machine with procan controller.  although it is not yet ready to go, we welcome inspections where we can go through the refurbishment process in detail – it’s more than a quick wipe over with the nearest rag.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

*please note that the video is of a previously refurbished boy 80m but is near identical to this one* ID: 4453 MANUFACTURER: BOY MODEL: 80M VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 80 CONTROL SYSTEM: PROCAN LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: NO LOCATION: WELLINGBOROUGH WE DO LIKE BOY’S HERE AT STV MACHINERY AND ADDING TO OUR COLLECTION THAT ARE CURRENTLY AWAITING REFURBISHMENT IS THIS 80 TONNE CLAMP MACHINE WITH PROCAN CONTROLLER. ALTHOUGH IT IS NOT YET READY TO GO, WE WELCOME INSPECTIONS WHERE WE CAN GO THROUGH THE REFURBISHMENT PROCESS IN DETAIL – IT’S MORE THAN A QUICK WIPE OVER WITH THE NEAREST RAG. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THEN PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. *PLEASE NOTE THAT THE VIDEO IS OF A PREVIOUSLY REFURBISHED BOY 80M BUT IS NEAR IDENTICAL TO THIS ONE*
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-niro mixing and bagging system:
two conical mixer, 3,500 l
mixing screw
inspection hatch
spout with pneumatic flat washer for maximum output
unimaster dust control
filling funnel
conveying blower, hiross colonna whf-065
6 x silos v2a, volume 30 t
sluice, reimelt blow 14
hydraulic scissor lift, 
reception for slit bag product with dust collection
2 x balance tanks with scales, reimelt
centrifugal sieve, gericke csm 1130
bagging line for 25 kg bags, cronos nda + nxt with 4 t / h
bag closing machine, doboy   NIRO MIXING AND BAGGING SYSTEM: TWO CONICAL MIXER, 3,500 L MIXING SCREW INSPECTION HATCH SPOUT WITH PNEUMATIC FLAT WASHER FOR MAXIMUM OUTPUT UNIMASTER DUST CONTROL FILLING FUNNEL CONVEYING BLOWER, HIROSS COLONNA WHF-065 6 X SILOS V2A, VOLUME 30 T SLUICE, REIMELT BLOW 14 HYDRAULIC SCISSOR LIFT, RECEPTION FOR SLIT BAG PRODUCT WITH DUST COLLECTION 2 X BALANCE TANKS WITH SCALES, REIMELT CENTRIFUGAL SIEVE, GERICKE CSM 1130 BAGGING LINE FOR 25 KG BAGS, CRONOS NDA + NXT WITH 4 T / H BAG CLOSING MACHINE, DOBOY
Vendedor: M&E TRADING WEIDNER e.K.
Año de construcción: usado
Precio: 14.750 £
Ubicación: Land-manufacturer: boy
model: 80m procan thermoset
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 80
control system: procan
lead time: 4 weeks from order
in production: yes

boy 80m procan with thermoset modifications. this machine is available for inspection at our workshop and is due to be fully refurbished shortly. we don’t tend to see many thermoset machines available on the market so this is a good opportunity to purchase a top quality machine with the modifications required for thermoset already done.
  MANUFACTURER: BOY MODEL: 80M PROCAN THERMOSET VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 80 CONTROL SYSTEM: PROCAN LEAD TIME: 4 WEEKS FROM ORDER IN PRODUCTION: YES BOY 80M PROCAN WITH THERMOSET MODIFICATIONS. THIS MACHINE IS AVAILABLE FOR INSPECTION AT OUR WORKSHOP AND IS DUE TO BE FULLY REFURBISHED SHORTLY. WE DON’T TEND TO SEE MANY THERMOSET MACHINES AVAILABLE ON THE MARKET SO THIS IS A GOOD OPPORTUNITY TO PURCHASE A TOP QUALITY MACHINE WITH THE MODIFICATIONS REQUIRED FOR THERMOSET ALREADY DONE.
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-80ton 80TON 80 TONELADAS
Vendedor: D&M MACHINERY LTD

Maquinas de riego e inyección sintética more

Año de construcción: usado
Ubicación: Land-1 x boy 80 m
year of construction 1997
clamping force: 80 to
working hours: 59.000 h
screw diameter: 36 mm 

1 x boy 25 d
year of construction 1997
clamping force: 25 to
working hours: 64.000 h 
screw diameter = 28 mm

1 x boy 30 m
built in 2000
clamping force: 30 tons
working hours: 62.000 h 
screw diameter = 28 mm

machines are in good condition, and available immediately!
further informations on request! 1 X BOY 80 M YEAR OF CONSTRUCTION 1997 CLAMPING FORCE: 80 TO WORKING HOURS: 59.000 H SCREW DIAMETER: 36 MM 1 X BOY 25 D YEAR OF CONSTRUCTION 1997 CLAMPING FORCE: 25 TO WORKING HOURS: 64.000 H SCREW DIAMETER = 28 MM 1 X BOY 30 M BUILT IN 2000 CLAMPING FORCE: 30 TONS WORKING HOURS: 62.000 H SCREW DIAMETER = 28 MM MACHINES ARE IN GOOD CONDITION, AND AVAILABLE IMMEDIATELY! FURTHER INFORMATIONS ON REQUEST!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-opp tape production line 

1. coating machine
make:p&t(korea)
manufacturing year:2014
coating : 4 coater
web width : max. 1,300?
machine speed :
max.80~8m/min
main drive motor : ac vector motor
380v, 60hz, 3p
1) 1st unwinder
*: 2shaft auto turret
* turret type
- geared motor/ worm&worm
*tension control: dancer roll/a.c servo
- ac servo motor : mitsubishi
* 3 OPP TAPE PRODUCTION LINE 1. COATING MACHINE MAKE:P&T(KOREA) MANUFACTURING YEAR:2014 COATING : 4 COATER WEB WIDTH : MAX. 1,300? MACHINE SPEED : MAX.80~8M/MIN MAIN DRIVE MOTOR : AC VECTOR MOTOR 380V, 60HZ, 3P 1) 1ST UNWINDER *: 2SHAFT AUTO TURRET * TURRET TYPE - GEARED MOTOR/ WORM&WORM *TENSION CONTROL: DANCER ROLL/A.C SERVO - AC SERVO MOTOR : MITSUBISHI * 3" AIR SHAFT + 6" ADAPTOR * SIDE-LAY ADJUSTMENT : MOTOR AUTO EPC * SHAFT CHUCKING : AIR CYLINDER * SPLICING : CROSS CUT / AUTO SPLICING 2) IN-FEED UNIT - IN-FEED ROLL : ?210? - NIP ROLL : ?180? * TENSION CONTROL - AC SERVO MOTOR : MITSUBISHI - TENSION PICK-UP : MITSYBISHI 3) WEB CLEANER ROLL(?85) - SAFETY COVER - 1ST, 2ND UNWINDER 2SET - CRONA 1SET 4) CRONA TREATMENT(MAKE:HANKOOK:KOREA) * MODEL : HK-7000 * 1ST, 2ND UNWINDER 1SET 5) MAYER BAR COATING UNIT * MAYER BAR SERVO MOTOR * BAR - FORMDE ROD, ?40?, SUS 304 6) 1ST DRY OVEN UNIT * ROLL SUPPORT TYPE(?118?, ) * JET NOZZLE HEAT FAN DRY TYPE * DRY TEMP.: MAX. 130? 7) MICRO GRAVURE COATING UNIT * MICRO GRAVUR ROLL 8) SLOT DIE & COMMA COATING UNIT * SLOT DIE & COMMA COATING UNIT CHANGEABLE * DIE, COMMA ROLL ATTACHING,DETACHING POSSIBLE * VACCUM CHAMBER UNIT * COMMA ROLL - 9) MAIN DRYING UNIT * DRY TEMP. : MAX. 200? * TEMPERATURE CONTROL AUTOMATIC 10) UV LAMP ZONE * UV TYPE - METAL HANLIDE UV LAMP : 4 LAMP - DUCT BLOWER - WAVE 365?, LENGTH 1400? - WAVE VARIANCE: VOLUME 3STAGE CONTROL - HOT MIRROR SHUTTER : AUTOMATIC CONTROL - TEMPERATURE SENSOR - CHAMBER GLASS WOOL 11) 2ND UNWINDER UNIT 12) CRONA * MODEL : HK-7000 * 1ST, 2ND UNWINDER 1SET 13) LAMINATOR UNIT * SIDE-LAY ADJUSTMENT : MOTOR, AUTO EPC - CPC ROLL : ?180?, AL+EPDM * LAMINATOR ROLL - OUT-DIA 210? (HEATING, COOLING) - STEEL+HCR - AC SERVO MOTOR : MITSUBISHI * NIP ROLL - ?180?, STKM+RTV 14) DELAMI & SCRAP WINDER UNIT 16) TRIMMING WINDER UNIT * : 3" AIR SHAFT WINDING, TRAVERSE 2. SLITTING MACHINE MAKE:P&T(KOREA) MANUFACTURING YEAR:2014 MODEL : 13S-SV-ITS-800 WEB WIDTH : MAX. 650? WEB THICKNESS : MAX.80? MACHINE SPEED : MAX.100M/MIN SLITTING : SHEAR KNIFE CUTTING * TENSION : AC SERVO * GAP ROLL UNIT : BY GAP SENSOR, LM - ROLL : ?98?, AL+NBR 3. SLITTING MACHINE MAKE:P&T(KOREA) MANUFACTURING YEAR:2014 WEB WIDTH : MAX. 1280? WEB THICKNESS : MAX.80? MACHINE SPEED : MAX.100M/MIN SLITTING TYPE : SHEAR KNIFE CUTTING 3) TRIMMING UNIT * 3" AIR SHAFT WINDING. TRAVERSE * WINDING DIA.: ?300? * WING TYPE : CENTER WINDING * TENSION : AC SERVO 4) REWINDING UNIT * TENSION : AC SERVO * GAP ROLL UNIT : LM BY GAP SENSOR - ROLL : ?98? 4. RTO MAKE:DIBOX(KOREA) MANUFACTURING YEAR:2014 MODEL : RTO-R5000-42K TYPE : ROTARY 1-CAN TYPE VOC ELIMINATION EFFICIENCY : MIN 99%, THC BASIS RTO HEAT RECOVERY EFFICIENCY : MEAN 90% CERAMIC : CERAMIC HONEYCOMB TREATMENT CAPACITY : 700N/HR? * INSIDE : SOFT CERAMIC REFRACTORY PYRO-BLOC/THERMAL * TEMPERATURE : 800±50? 2) BURNER * FUEL : GAS(LNG) * CAPACITY : 900,000KCAL/HR * MAKER : NORTH AMERICAN * FLARE DETECTOR : UV SANNER 3) ACCUMULATOR FOR HEATER * MATERIAL : SS400, T6.0 * : SOFT CERAMIC REFRACTORY PYRO-BLOC/THERMAL * :150?×150?×300?(43× 4) ROTARY VALVE * RATCHET GEAR TYPE * * DRIVE : ELEC. DRIVE * MOTOR : 380V×60HZ×3P, 3.7KW 5) RTO F.D FAN * TYPE : FORCED DRAFT / TURBO * MOTOR : 380V×60HZ×3P, 90KW * FLUID CONTROLL : INVERTER 90KW 6) PURGE FAN * FORCED DRAFT / TURBO * MOTOR : 380V×60HZ×3P, 11KW * FLUID CONTROLL : MANUAL DAMPER 7) COMBUSTION FAN MOTOR : 380V×60HZ×4P, 11KW 8) GAS DETECTOR * LEL DETCTOR : MAKER-GASTRON 5 .BOILER MAKE:SPI(KOREA) MANUFACTURING YEAR:2014 1,000,000 KCAL/HR 800,000 KCAL/HR 1) GAS BURNER * COMBUSTION CONTROL * FUEL : LPG * MOTOR : 4.5KW 6 .CLEAN ROOM MAKE:YOUNGSUNG(KOREA) MANUFACTURING YEAR:2014 DESIGN STANDARD : 10,000CLASS 7.SLICER MAKE:BOYOUNG(KOREA) MANUFACTURING YEAR:2014 MATERIAL TAPE: WIDTH 1300?, DIA. 230? SERVO MOTOR CONTROL CORE : 3" 8.MIXER MAKE:DAEDONG(KOREA) MANUFACTURING YEAR:2014 DISSOLVER 2SET HYDRAULIC VACUUM TYPE 10HP×380V ×4P×60HZ BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land--cnc lathe vdf 180 c.
-number of spindles 1 - number 1 turret
workspace-zylindrisch-- cap rotary diameter (max) 310 mm
-clamping diameter for rod work (max) 52 mm
-boy workpiece length (max) 1150 mm
main spindle - speed range of 31.5 / min
-speed range up to 5000 rpm
-25 kw
cross slide - z 0.1 mm / min feed
-feed z up to 10000 mm / min
-feed x 0.1 mm / min
-feed x 10000 mm / min
-rapid traverse z 10000 mm / min
-rapid traverse x 10000 mm / min
-tool holders: revolver - tool holder - turn: din 69880 40 mm - number of tool positions (total) 12 tailstock - quill stroke 80 mm
-quill diameter 90 mm
tool magazine - number of tool positions 12 dimensions / weights - space left / right 5000 mm
-space-vorne / rear 2120 mm
-total height 2068 mm
auxiliary equipment turning - conveyors: yes - coolant system: yes -CNC LATHE VDF 180 C. -NUMBER OF SPINDLES 1 - NUMBER 1 TURRET WORKSPACE-ZYLINDRISCH-- CAP ROTARY DIAMETER (MAX) 310 MM -CLAMPING DIAMETER FOR ROD WORK (MAX) 52 MM -BOY WORKPIECE LENGTH (MAX) 1150 MM MAIN SPINDLE - SPEED RANGE OF 31.5 / MIN -SPEED RANGE UP TO 5000 RPM -25 KW CROSS SLIDE - Z 0.1 MM / MIN FEED -FEED Z UP TO 10000 MM / MIN -FEED X 0.1 MM / MIN -FEED X 10000 MM / MIN -RAPID TRAVERSE Z 10000 MM / MIN -RAPID TRAVERSE X 10000 MM / MIN -TOOL HOLDERS: REVOLVER - TOOL HOLDER - TURN: DIN 69880 40 MM - NUMBER OF TOOL POSITIONS (TOTAL) 12 TAILSTOCK - QUILL STROKE 80 MM -QUILL DIAMETER 90 MM TOOL MAGAZINE - NUMBER OF TOOL POSITIONS 12 DIMENSIONS / WEIGHTS - SPACE LEFT / RIGHT 5000 MM -SPACE-VORNE / REAR 2120 MM -TOTAL HEIGHT 2068 MM AUXILIARY EQUIPMENT TURNING - CONVEYORS: YES - COOLANT SYSTEM: YES
Vendedor: AS Maschinenhandel
Año de construcción: usado
Precio: 300 €
Ubicación: Land-shops - butchers saw - bone saw - saw - bosch
a saw - butchers saw - bone saw - bosch is offered.
220v ac.
the saw works great and is in good condition, (see photos).

payment: cash or payment in advance.
pickup or shipping.
another on request.   SHOPS - BUTCHERS SAW - BONE SAW - SAW - BOSCH A SAW - BUTCHERS SAW - BONE SAW - BOSCH IS OFFERED. 220V AC. THE SAW WORKS GREAT AND IS IN GOOD CONDITION, (SEE PHOTOS). PAYMENT: CASH OR PAYMENT IN ADVANCE. PICKUP OR SHIPPING. ANOTHER ON REQUEST.
Vendedor: Fleischereimaschinen Alexander Buss
Año de construcción: usado
Ubicación: Land-filling and dosing device boyens compact powerlift
type: cdp

compact powerlift, unifiller-with accessories
runs on air
power max 10 bar
machine is made entirely of stainless steel
with foot pedal switch FILLING AND DOSING DEVICE BOYENS COMPACT POWERLIFT TYPE: CDP COMPACT POWERLIFT, UNIFILLER-WITH ACCESSORIES RUNS ON AIR POWER MAX 10 BAR MACHINE IS MADE ENTIRELY OF STAINLESS STEEL WITH FOOT PEDAL SWITCH
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-arehouse no.: 	502597
manufacturer: 	dr. boy
typ:	dr. boy 55 a
controller unit:	procan alpha
year of construction:	2017
operating hours:	5218 h

the boy 50a is still almost new and still has a long production life ahead of it. the machine was delivered last year at an original price of around € 44,000.
now, with a significant savings, you can purchase a readily available boy 55a.
a new production facility can move into the machine at the end of june 2018.



technical data: clamping unit
type of drive:	fully hydraulically
clamping type:	fully hydraulic
method of construction:	four tie bars
clamping force:	550	kn
distance between tie bars h:	565	mm
distance between tie bars v:	540	mm
size of mould plates h:	360	mm
size of mould plates v:	335	mm
min. mould height:	250	mm
max. open daylight:	650	mm
opening stroke:	400	mm
ejector stroke:	80	mm
ejector force:	20	kn
mould weight:	600	kg

technical data:injection unit
screw diameter:	38	mm
swept volume:	136	ccm
injection pressure:	1508	bar
screw length:	16	l/d
screw stroke:	120	mm
screw rotation:	325	min
screw torque:	280	n
plasticising rate:	22	g/s ps
injection rate into the open:	144	g/s ps
number of heating zones:	5	
nozzle contact force:	66	kn
nozzle stroke:	210	mm
measure & weight
measures of machine lxbxh:	3.66m x 1.14m x 2m
total weight:	2250kg
equipment included


    ? screen text german
    ? machine incl. water flow regulator
    ? cee-socket 16a
    ? schuko-socket 10a
    ? electric interface for handling units according to euromap 12
    ? machine without hopper loader
    ? anti vibration mounts
    ? machine with material hopper  AREHOUSE NO.: 502597 MANUFACTURER: DR. BOY TYP: DR. BOY 55 A CONTROLLER UNIT: PROCAN ALPHA YEAR OF CONSTRUCTION: 2017 OPERATING HOURS: 5218 H THE BOY 50A IS STILL ALMOST NEW AND STILL HAS A LONG PRODUCTION LIFE AHEAD OF IT. THE MACHINE WAS DELIVERED LAST YEAR AT AN ORIGINAL PRICE OF AROUND € 44,000. NOW, WITH A SIGNIFICANT SAVINGS, YOU CAN PURCHASE A READILY AVAILABLE BOY 55A. A NEW PRODUCTION FACILITY CAN MOVE INTO THE MACHINE AT THE END OF JUNE 2018. TECHNICAL DATA: CLAMPING UNIT TYPE OF DRIVE: FULLY HYDRAULICALLY CLAMPING TYPE: FULLY HYDRAULIC METHOD OF CONSTRUCTION: FOUR TIE BARS CLAMPING FORCE: 550 KN DISTANCE BETWEEN TIE BARS H: 565 MM DISTANCE BETWEEN TIE BARS V: 540 MM SIZE OF MOULD PLATES H: 360 MM SIZE OF MOULD PLATES V: 335 MM MIN. MOULD HEIGHT: 250 MM MAX. OPEN DAYLIGHT: 650 MM OPENING STROKE: 400 MM EJECTOR STROKE: 80 MM EJECTOR FORCE: 20 KN MOULD WEIGHT: 600 KG TECHNICAL DATA:INJECTION UNIT SCREW DIAMETER: 38 MM SWEPT VOLUME: 136 CCM INJECTION PRESSURE: 1508 BAR SCREW LENGTH: 16 L/D SCREW STROKE: 120 MM SCREW ROTATION: 325 MIN SCREW TORQUE: 280 N PLASTICISING RATE: 22 G/S PS INJECTION RATE INTO THE OPEN: 144 G/S PS NUMBER OF HEATING ZONES: 5 NOZZLE CONTACT FORCE: 66 KN NOZZLE STROKE: 210 MM MEASURE & WEIGHT MEASURES OF MACHINE LXBXH: 3.66M X 1.14M X 2M TOTAL WEIGHT: 2250KG EQUIPMENT INCLUDED ? SCREEN TEXT GERMAN ? MACHINE INCL. WATER FLOW REGULATOR ? CEE-SOCKET 16A ? SCHUKO-SOCKET 10A ? ELECTRIC INTERFACE FOR HANDLING UNITS ACCORDING TO EUROMAP 12 ? MACHINE WITHOUT HOPPER LOADER ? ANTI VIBRATION MOUNTS ? MACHINE WITH MATERIAL HOPPER
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-condition: new

technical data:
• overall dimensions 660x470x950 mm;
• electric power 230v / 50hz / 16 amp;
• gel suction tube;
• digital temperature and pressure setting;
• two heated spray hoses;
• castors;
• purpose for liquid spray gel;
• weight 110 kg.  CONDITION: NEW TECHNICAL DATA: • OVERALL DIMENSIONS 660X470X950 MM; • ELECTRIC POWER 230V / 50HZ / 16 AMP; • GEL SUCTION TUBE; • DIGITAL TEMPERATURE AND PRESSURE SETTING; • TWO HEATED SPRAY HOSES; • CASTORS; • PURPOSE FOR LIQUID SPRAY GEL; • WEIGHT 110 KG.
Vendedor: Baltgina, UAB
Año de construcción: usado
Ubicación: Land-alkaline unit without classification<br/>  lye aqualung<br/>  pretzel aqualung<br/>  4-federtechnik<br/>  stainless steel stand<br/>  incl. travel with storage and locking rollers<br/>  suitable for sheet metal size 580 x 780 mm,<br/>  with lye drain valve<br/>  dimensions in mm: 870 x 670 x 850 wxdxh; ready for operation ALKALINE UNIT WITHOUT CLASSIFICATION
LYE AQUALUNG
PRETZEL AQUALUNG
4-FEDERTECHNIK
STAINLESS STEEL STAND
INCL. TRAVEL WITH STORAGE AND LOCKING ROLLERS
SUITABLE FOR SHEET METAL SIZE 580 X 780 MM,
WITH LYE DRAIN VALVE
DIMENSIONS IN MM: 870 X 670 X 850 WXDXH; READY FOR OPERATION
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-used shop counter / refrigerated counter kramer, type: filia-uh consisting of 4 parts - countertop in corian - part 1: 1,90 m â?? part 2 corner: 1.40 m - part 3: 1,90 m â?? part 4: 1.70 m, document station (snack) of 0.80 m output and 0.90 m cooled - incl. cooling counter accessories and night cover cooling system gÃ?ntner: - ventilated refrigeration with fixed large surface evaporators - multiple injection - electronic temperature controller with cyclic defrost - temperature per zone separately available 2 stcük bizerba pos scales - are ce-h 806 (6 kg m it, receipt and label printers) - ce-h 815 (15 kg only receipt printer), incl. cash boost - with fiscal memory a tour is like possible by arrangement.  USED SHOP COUNTER / REFRIGERATED COUNTER KRAMER, TYPE: FILIA-UH CONSISTING OF 4 PARTS - COUNTERTOP IN CORIAN - PART 1: 1,90 M â?? PART 2 CORNER: 1.40 M - PART 3: 1,90 M â?? PART 4: 1.70 M, DOCUMENT STATION (SNACK) OF 0.80 M OUTPUT AND 0.90 M COOLED - INCL. COOLING COUNTER ACCESSORIES AND NIGHT COVER COOLING SYSTEM GÃ?NTNER: - VENTILATED REFRIGERATION WITH FIXED LARGE SURFACE EVAPORATORS - MULTIPLE INJECTION - ELECTRONIC TEMPERATURE CONTROLLER WITH CYCLIC DEFROST - TEMPERATURE PER ZONE SEPARATELY AVAILABLE 2 STCüK BIZERBA POS SCALES - ARE CE-H 806 (6 KG M IT, RECEIPT AND LABEL PRINTERS) - CE-H 815 (15 KG ONLY RECEIPT PRINTER), INCL. CASH BOOST - WITH FISCAL MEMORY A TOUR IS LIKE POSSIBLE BY ARRANGEMENT.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Ubicación: Land-cam-pmm
manufacturer: cam/tes gmbh
model: p.mm/d 
for packing of products into folding-boy with hot glue sealing
year of construction: 1995
location: germany
price: please make a price-offer
 CAM-PMM MANUFACTURER: CAM/TES GMBH MODEL: P.MM/D FOR PACKING OF PRODUCTS INTO FOLDING-BOY WITH HOT GLUE SEALING YEAR OF CONSTRUCTION: 1995 LOCATION: GERMANY PRICE: PLEASE MAKE A PRICE-OFFER
Vendedor: USED Machines
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-wp 6 reihige hamburger, doughnuts, broetchenanlage baujahr 1999, teiggewicht 35-85 stundenleistung bis 11,500 stck, gramm.
anlage einschl. vorgaerschrank etwa 5 min., long roller station und automatic absetzungeinheit.
herstellung von fuer owned that:
schlitzwalzen, gepresst, rundprodukte, langwalzprodukte geschnitten carcasses, hamburger, glatt, who gepresst donuts.  WP 6 REIHIGE HAMBURGER, DOUGHNUTS, BROETCHENANLAGE BAUJAHR 1999, TEIGGEWICHT 35-85 STUNDENLEISTUNG BIS 11,500 STCK, GRAMM. ANLAGE EINSCHL. VORGAERSCHRANK ETWA 5 MIN., LONG ROLLER STATION UND AUTOMATIC ABSETZUNGEINHEIT. HERSTELLUNG VON FUER OWNED THAT: SCHLITZWALZEN, GEPRESST, RUNDPRODUKTE, LANGWALZPRODUKTE GESCHNITTEN CARCASSES, HAMBURGER, GLATT, WHO GEPRESST DONUTS.
Vendedor: ISBM Borne BV
Año de construcción: usado
Ubicación: Land-jelly economy<br>table model<br>gelling, apricot and delimiting<br>maintenance-free and reliable technology<br>stainless steel<br>year 2013<br>connection 220v, 1.7 kw, ready to plug in<br>dimensions: 315 x 450 x 350 mm, wxdxh; ready for operation JELLY ECONOMY
TABLE MODEL
GELLING, APRICOT AND DELIMITING
MAINTENANCE-FREE AND RELIABLE TECHNOLOGY
STAINLESS STEEL
YEAR 2013
CONNECTION 220V, 1.7 KW, READY TO PLUG IN
DIMENSIONS: 315 X 450 X 350 MM, WXDXH; READY FOR OPERATION
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land--cnc lathe vdf 180 c.<br/>  -number of spindles 1 - number 1 turret<br/>  workspace-zylindrisch-- cap rotary diameter (max) 310 mm<br/>  -clamping diameter for rod work (max) 52 mm<br/>  -boy workpiece length (max) 1150 mm<br/>  main spindle - speed range of 31.5 / min<br/>  -speed range up to 5000 rpm<br/>  -25 kw<br/>  cross slide - z 0.1 mm / min feed<br/>  bbgnlnd8ug<br/>  -feed z up to 10000 mm / min<br/>  -feed x 0.1 mm / min<br/>  -feed x 10000 mm / min<br/>  -rapid traverse z 10000 mm / min<br/>  -rapid traverse x 10000 mm / min<br/>  -tool holders: revolver - tool holder - turn: din 69880 40 mm - number of tool positions (total) 12 tailstock - quill stroke 80 mm<br/>  -quill diameter 90 mm<br/>  tool magazine - number of tool positions 12 dimensions / weights - space left / right 5000 mm<br/>  -space-vorne / rear 2120 mm<br/>  -total height 2068 mm<br/>  auxiliary equipment turning -.<br/>  -conveyors: yes - coolant system: yes -CNC LATHE VDF 180 C.
-NUMBER OF SPINDLES 1 - NUMBER 1 TURRET
WORKSPACE-ZYLINDRISCH-- CAP ROTARY DIAMETER (MAX) 310 MM
-CLAMPING DIAMETER FOR ROD WORK (MAX) 52 MM
-BOY WORKPIECE LENGTH (MAX) 1150 MM
MAIN SPINDLE - SPEED RANGE OF 31.5 / MIN
-SPEED RANGE UP TO 5000 RPM
-25 KW
CROSS SLIDE - Z 0.1 MM / MIN FEED
BBGNLND8UG
-FEED Z UP TO 10000 MM / MIN
-FEED X 0.1 MM / MIN
-FEED X 10000 MM / MIN
-RAPID TRAVERSE Z 10000 MM / MIN
-RAPID TRAVERSE X 10000 MM / MIN
-TOOL HOLDERS: REVOLVER - TOOL HOLDER - TURN: DIN 69880 40 MM - NUMBER OF TOOL POSITIONS (TOTAL) 12 TAILSTOCK - QUILL STROKE 80 MM
-QUILL DIAMETER 90 MM
TOOL MAGAZINE - NUMBER OF TOOL POSITIONS 12 DIMENSIONS / WEIGHTS - SPACE LEFT / RIGHT 5000 MM
-SPACE-VORNE / REAR 2120 MM
-TOTAL HEIGHT 2068 MM
AUXILIARY EQUIPMENT TURNING -.
-CONVEYORS: YES - COOLANT SYSTEM: YES
Vendedor: AS Maschinenhandel
Año de construcción: usado
Precio: 14.990 €
Ubicación: Land-used z-arm mixer laska, type: z arm comes directly from the butcher's shop operating the machine. more information on request. USED Z-ARM MIXER LASKA, TYPE: Z ARM COMES DIRECTLY FROM THE BUTCHER'S SHOP OPERATING THE MACHINE. MORE INFORMATION ON REQUEST.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Ubicación: Land-used emulsifyers alpina, type: 200 l - bowl volume: 200 l

the machine comes directly from the butcher company. more information on request. USED EMULSIFYERS ALPINA, TYPE: 200 L - BOWL VOLUME: 200 L THE MACHINE COMES DIRECTLY FROM THE BUTCHER COMPANY. MORE INFORMATION ON REQUEST.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more BOY types: