255 ofertas

Año de construcción: usado
Precio: 30.000 GBP
Ubicación: Land-compact design, self-adhesive label applicator with average output of 36,000 containers per hour (60 per minute, depending on container size and type). suitable for the following bottle and label sizes: bottle Ø 16mm-100mm, bottle height 35mm-160mm, label length 20mm-150mm, label height 15mm-80mm. comes with 5 sets of change parts and was previously used for the following products: ampoules 1-2ml, 5ml, 10ml and vials 2ml, 5ml, 10ml. due to its consistent, precise labelling and modular label dispenser design, the esa series is best suited to small bottles and vials as well as ampoules, cartridges and other non-stable containers. all electrical, electronic and plc components are integrated in the machines to save space. depending on the esa 1006 set up the containers are supplied by a machine upstream or by a suitable feed system (stand-alone machines are loaded manually from trays). the feed of the bottles into the working area is controlled by minimum/maximum sensors. the operations are carried out in an intermittent or continuous motion depending on the machine model and set up. to provide more convenience and reliability, the functionality of the label dispenser can be increased by a series of additional checking devices and workstations. this machine has been upgraded and modified to current pharma grade production standards. delta elektronik cd1 servo drive/positioner for controlling the motor torque and speed. laetus luminescence sensor lumat 920 m with camera system. camera system by vision automation a/s installed on machine (camera system manufacturer web site http://www.visionautomation.dk/). allen coder. 220/380v, 2kw, 50hz, 24volt. manuals partilly in german, danish & english and includes electrical diagrams. machine sizes: labeller 2100mm x 2000mm x 2000mm high, approx weight 20kg; control panel  2000mm x 1500mm x 2100mm high, approx weight 100kg. excellent condition - working when removed from production. COMPACT DESIGN, SELF-ADHESIVE LABEL APPLICATOR WITH AVERAGE OUTPUT OF 36,000 CONTAINERS PER HOUR (60 PER MINUTE, DEPENDING ON CONTAINER SIZE AND TYPE). SUITABLE FOR THE FOLLOWING BOTTLE AND LABEL SIZES: BOTTLE Ø 16MM-100MM, BOTTLE HEIGHT 35MM-160MM, LABEL LENGTH 20MM-150MM, LABEL HEIGHT 15MM-80MM. COMES WITH 5 SETS OF CHANGE PARTS AND WAS PREVIOUSLY USED FOR THE FOLLOWING PRODUCTS: AMPOULES 1-2ML, 5ML, 10ML AND VIALS 2ML, 5ML, 10ML. DUE TO ITS CONSISTENT, PRECISE LABELLING AND MODULAR LABEL DISPENSER DESIGN, THE ESA SERIES IS BEST SUITED TO SMALL BOTTLES AND VIALS AS WELL AS AMPOULES, CARTRIDGES AND OTHER NON-STABLE CONTAINERS. ALL ELECTRICAL, ELECTRONIC AND PLC COMPONENTS ARE INTEGRATED IN THE MACHINES TO SAVE SPACE. DEPENDING ON THE ESA 1006 SET UP THE CONTAINERS ARE SUPPLIED BY A MACHINE UPSTREAM OR BY A SUITABLE FEED SYSTEM (STAND-ALONE MACHINES ARE LOADED MANUALLY FROM TRAYS). THE FEED OF THE BOTTLES INTO THE WORKING AREA IS CONTROLLED BY MINIMUM/MAXIMUM SENSORS. THE OPERATIONS ARE CARRIED OUT IN AN INTERMITTENT OR CONTINUOUS MOTION DEPENDING ON THE MACHINE MODEL AND SET UP. TO PROVIDE MORE CONVENIENCE AND RELIABILITY, THE FUNCTIONALITY OF THE LABEL DISPENSER CAN BE INCREASED BY A SERIES OF ADDITIONAL CHECKING DEVICES AND WORKSTATIONS. THIS MACHINE HAS BEEN UPGRADED AND MODIFIED TO CURRENT PHARMA GRADE PRODUCTION STANDARDS. DELTA ELEKTRONIK CD1 SERVO DRIVE/POSITIONER FOR CONTROLLING THE MOTOR TORQUE AND SPEED. LAETUS LUMINESCENCE SENSOR LUMAT 920 M WITH CAMERA SYSTEM. CAMERA SYSTEM BY VISION AUTOMATION A/S INSTALLED ON MACHINE (CAMERA SYSTEM MANUFACTURER WEB SITE HTTP://WWW.VISIONAUTOMATION.DK/). ALLEN CODER. 220/380V, 2KW, 50HZ, 24VOLT. MANUALS PARTILLY IN GERMAN, DANISH & ENGLISH AND INCLUDES ELECTRICAL DIAGRAMS. MACHINE SIZES: LABELLER 2100MM X 2000MM X 2000MM HIGH, APPROX WEIGHT 20KG; CONTROL PANEL 2000MM X 1500MM X 2100MM HIGH, APPROX WEIGHT 100KG. EXCELLENT CONDITION - WORKING WHEN REMOVED FROM PRODUCTION.
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 8.500 €
Ubicación: Land-pulsarr industrial research bv / barco machine vision optical sorting machine with 6 black and white cameras, machine type: mira-b-1600, machine number: lmb006, serie: alg-5, year of construction: 2001, belt width: 1100 mm, total dimensions: 4400 mm x 2500 mm x 2500 mm. PULSARR INDUSTRIAL RESEARCH BV / BARCO MACHINE VISION OPTICAL SORTING MACHINE WITH 6 BLACK AND WHITE CAMERAS, MACHINE TYPE: MIRA-B-1600, MACHINE NUMBER: LMB006, SERIE: ALG-5, YEAR OF CONSTRUCTION: 2001, BELT WIDTH: 1100 MM, TOTAL DIMENSIONS: 4400 MM X 2500 MM X 2500 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-cerutti, r48, rotogravure printing machine
ref.nr: 2636 manufacturer cerutti model r48 year built: 1986 speed: 280 mt/min-max sheet size: 1230 mm availability: immediately condition: good price: on technical request spezification: â?¢ maximum speed: 280 mt/min
â?¢ maximum web material: 1230 mm
â?¢ mechanical axes
â?¢ printing trolley: 18
â?¢ cylinder length: 1270 mm
â?¢ material suitable for the machine: pet/opp
â?¢ co2 system for safety - distribution through all the machine - co2 bottle not included
â?¢ lel system provided by nira
â?¢ optical fiber for control register
â?¢ register by graficontrol
â?¢ inspection system by avt: 100%
â?¢ matrix camera for front and back: 2 no.
â?¢ maximum reels diameter (x 2): 800 mm
â?¢ corona treater by ferrarini benelli: 12 kw
â?¢ web guide by fife: 1
â?¢ discharging bar by spengler: 1
â?¢ printing unit 1: reversible printing unit, double oven unit: 2 x 2, 5 mt, esa assistance by spengler: 1 top loading, discharging bar by spengler: 1, viscosity control by fasnac: 1 (with double solvent)
â?¢ printing unit from 2 to 8: single oven unit. 2.5 mt, esa assistance by spengler: 1 top loading, discharging bar by spengler: 2, viscosity control by fasnac: 1 (with double solvent), turning bar after unit 8
â?¢ printing unit 9: reversible printing unit, double oven unit, 2 x 2, 5 mt, esa assistance by spengler: 1 top loading, discharging bar by spengler: 1, viscosity control by fasnac: 1 (with double solvent), turning bar after unit 9.
â?¢ inline laminating line (duplex): rewinder: maximum reels diameter (x 2): 800 mm, corona treater by ferrarini benelli: 7.5 kw, web guide by fife: 1, discharging bar by spengler: 1, viscosity oven control by fasnac, unit: 6 mt, turning bar after nip point, possibility of cutting in line after the nip point.
â?¢ inline laminating line (triplex or cold seal): rewinder: maximum reels diameter (x 2): web guide: 1, 800 mm, discharging bar by spengler: oven 1, unit: 6 mt.
â?¢ unwinder: maximum reels diameter (x 2): 800 mm, discharging bar by spengler: 1
â?¢ drawings for material passage
â?¢ machine drawing
â?¢ utilities: steam, air pressure, chilled water
â?¢ 9 + 9 trolley for ink color 2 trolley cold seal 2 drive motor and little various spare parts
 CERUTTI, R48, ROTOGRAVURE PRINTING MACHINE REF.NR: 2636 MANUFACTURER CERUTTI MODEL R48 YEAR BUILT: 1986 SPEED: 280 MT/MIN-MAX SHEET SIZE: 1230 MM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: Â?¢ MAXIMUM SPEED: 280 MT/MIN Â?¢ MAXIMUM WEB MATERIAL: 1230 MM Â?¢ MECHANICAL AXES Â?¢ PRINTING TROLLEY: 18 Â?¢ CYLINDER LENGTH: 1270 MM Â?¢ MATERIAL SUITABLE FOR THE MACHINE: PET/OPP Â?¢ CO2 SYSTEM FOR SAFETY - DISTRIBUTION THROUGH ALL THE MACHINE - CO2 BOTTLE NOT INCLUDED Â?¢ LEL SYSTEM PROVIDED BY NIRA Â?¢ OPTICAL FIBER FOR CONTROL REGISTER Â?¢ REGISTER BY GRAFICONTROL Â?¢ INSPECTION SYSTEM BY AVT: 100% Â?¢ MATRIX CAMERA FOR FRONT AND BACK: 2 NO. Â?¢ MAXIMUM REELS DIAMETER (X 2): 800 MM Â?¢ CORONA TREATER BY FERRARINI BENELLI: 12 KW Â?¢ WEB GUIDE BY FIFE: 1 Â?¢ DISCHARGING BAR BY SPENGLER: 1 Â?¢ PRINTING UNIT 1: REVERSIBLE PRINTING UNIT, DOUBLE OVEN UNIT: 2 X 2, 5 MT, ESA ASSISTANCE BY SPENGLER: 1 TOP LOADING, DISCHARGING BAR BY SPENGLER: 1, VISCOSITY CONTROL BY FASNAC: 1 (WITH DOUBLE SOLVENT) Â?¢ PRINTING UNIT FROM 2 TO 8: SINGLE OVEN UNIT. 2.5 MT, ESA ASSISTANCE BY SPENGLER: 1 TOP LOADING, DISCHARGING BAR BY SPENGLER: 2, VISCOSITY CONTROL BY FASNAC: 1 (WITH DOUBLE SOLVENT), TURNING BAR AFTER UNIT 8 Â?¢ PRINTING UNIT 9: REVERSIBLE PRINTING UNIT, DOUBLE OVEN UNIT, 2 X 2, 5 MT, ESA ASSISTANCE BY SPENGLER: 1 TOP LOADING, DISCHARGING BAR BY SPENGLER: 1, VISCOSITY CONTROL BY FASNAC: 1 (WITH DOUBLE SOLVENT), TURNING BAR AFTER UNIT 9. Â?¢ INLINE LAMINATING LINE (DUPLEX): REWINDER: MAXIMUM REELS DIAMETER (X 2): 800 MM, CORONA TREATER BY FERRARINI BENELLI: 7.5 KW, WEB GUIDE BY FIFE: 1, DISCHARGING BAR BY SPENGLER: 1, VISCOSITY OVEN CONTROL BY FASNAC, UNIT: 6 MT, TURNING BAR AFTER NIP POINT, POSSIBILITY OF CUTTING IN LINE AFTER THE NIP POINT. Â?¢ INLINE LAMINATING LINE (TRIPLEX OR COLD SEAL): REWINDER: MAXIMUM REELS DIAMETER (X 2): WEB GUIDE: 1, 800 MM, DISCHARGING BAR BY SPENGLER: OVEN 1, UNIT: 6 MT. Â?¢ UNWINDER: MAXIMUM REELS DIAMETER (X 2): 800 MM, DISCHARGING BAR BY SPENGLER: 1 Â?¢ DRAWINGS FOR MATERIAL PASSAGE Â?¢ MACHINE DRAWING Â?¢ UTILITIES: STEAM, AIR PRESSURE, CHILLED WATER Â?¢ 9 + 9 TROLLEY FOR INK COLOR 2 TROLLEY COLD SEAL 2 DRIVE MOTOR AND LITTLE VARIOUS SPARE PARTS
Vendedor: PP LION GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.750 €
Ubicación: Land-on exclusive sale next 21 march 2019 at 10:30 a.m. in cazzago san martino bs
to view the lot, please contact us at 0307751645 and make an appointment.
unique batch of machines built in 2012 and 2013 for the testing of electronic boards, without control software. the machines are still packed.
for further details, please refer to the report prepared by the expert estimator dr. andrea antonielli eng. of 03.01.2019, attached to the catalog.
-	
- n. 17 machines mod. insite benchtop 5.1 with 5 cameras of 10 megapixels
- n. 36 machines mod. insite benchtop 5.5 with 5 cameras of 5 megapixels
- n. 3 machines mod. insite benchtop 1.1 with 1 camera of 10 megapixels
  ON EXCLUSIVE SALE NEXT 21 MARCH 2019 AT 10:30 A.M. IN CAZZAGO SAN MARTINO BS TO VIEW THE LOT, PLEASE CONTACT US AT 0307751645 AND MAKE AN APPOINTMENT. UNIQUE BATCH OF MACHINES BUILT IN 2012 AND 2013 FOR THE TESTING OF ELECTRONIC BOARDS, WITHOUT CONTROL SOFTWARE. THE MACHINES ARE STILL PACKED. FOR FURTHER DETAILS, PLEASE REFER TO THE REPORT PREPARED BY THE EXPERT ESTIMATOR DR. ANDREA ANTONIELLI ENG. OF 03.01.2019, ATTACHED TO THE CATALOG. - - N. 17 MACHINES MOD. INSITE BENCHTOP 5.1 WITH 5 CAMERAS OF 10 MEGAPIXELS - N. 36 MACHINES MOD. INSITE BENCHTOP 5.5 WITH 5 CAMERAS OF 5 MEGAPIXELS - N. 3 MACHINES MOD. INSITE BENCHTOP 1.1 WITH 1 CAMERA OF 10 MEGAPIXELS
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 189 €
Ubicación: Land-powered roller conveyors

data:
-length: approx. 1980mm
-ges. width: 480mm
-roll width: 420 mm
-roll type: steel roller
-via a belt system connected and powered
-vintage cameras, technically i.o.

-roller conveyors multiple vorhanden--

price:
â?¬189,00 net
â?¬224,91 gross
you will receive an invoice with expelled vat

delivery upon request by us conveniently possible.
 POWERED ROLLER CONVEYORS DATA: -LENGTH: APPROX. 1980MM -GES. WIDTH: 480MM -ROLL WIDTH: 420 MM -ROLL TYPE: STEEL ROLLER -VIA A BELT SYSTEM CONNECTED AND POWERED -VINTAGE CAMERAS, TECHNICALLY I.O. -ROLLER CONVEYORS MULTIPLE VORHANDEN-- PRICE: &ACIRC;?&NOT;189,00 NET &ACIRC;?&NOT;224,91 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 400 mm<br/>description: video surveillance kit complete with 4 cameras WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 400 MM
DESCRIPTION: VIDEO SURVEILLANCE KIT COMPLETE WITH 4 CAMERAS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 190 €
Ubicación: Land-starting-up protection / stand protection needed

data:
-h: approx. 40 cm
-hole spacings are to refer to the illustrations.
-the range is in the purchase not included.

-vintage cameras
-color: yellow
-price for 20 units

price:
â?¬190,00 net
â?¬226,10 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. STARTING-UP PROTECTION / STAND PROTECTION NEEDED DATA: -H: APPROX. 40 CM -HOLE SPACINGS ARE TO REFER TO THE ILLUSTRATIONS. -THE RANGE IS IN THE PURCHASE NOT INCLUDED. -VINTAGE CAMERAS -COLOR: YELLOW -PRICE FOR 20 UNITS PRICE: &ACIRC;?&NOT;190,00 NET &ACIRC;?&NOT;226,10 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 120 €
Ubicación: Land-starting-up protection / stand protection needed

data:
-h: approx. 40 cm
-hole spacings are to refer to the illustrations.
-the range is in the purchase not included.

-vintage cameras
-color: yellow
-price for 16 pieces

price:
â?¬120,00 net
â?¬142,80 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. STARTING-UP PROTECTION / STAND PROTECTION NEEDED DATA: -H: APPROX. 40 CM -HOLE SPACINGS ARE TO REFER TO THE ILLUSTRATIONS. -THE RANGE IS IN THE PURCHASE NOT INCLUDED. -VINTAGE CAMERAS -COLOR: YELLOW -PRICE FOR 16 PIECES PRICE: &ACIRC;?&NOT;120,00 NET &ACIRC;?&NOT;142,80 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 400 mm<br/>description: video surveillance kit complete with 4 cameras WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 400 MM
DESCRIPTION: VIDEO SURVEILLANCE KIT COMPLETE WITH 4 CAMERAS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 100 €
Ubicación: Land-starting-up protection / stand protection needed

data:
-h: approx. 40 cm
-hole spacings are to refer to the illustrations.
-the range is in the purchase not included.

-vintage cameras
-color: red
-price for 13 pieces

price:
â?¬100,00 net
â?¬119.00 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. STARTING-UP PROTECTION / STAND PROTECTION NEEDED DATA: -H: APPROX. 40 CM -HOLE SPACINGS ARE TO REFER TO THE ILLUSTRATIONS. -THE RANGE IS IN THE PURCHASE NOT INCLUDED. -VINTAGE CAMERAS -COLOR: RED -PRICE FOR 13 PIECES PRICE: &ACIRC;?&NOT;100,00 NET &ACIRC;?&NOT;119.00 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.200 €
Ubicación: Land-tire rack bike rack garage shelf
vintage cameras

data:
-h: 300 cm
-t: approx. 40 cm
-l: approx. 100,3 yds

-offer
-used - good condition
-racks and crossbars in bright zinc-plated
-connect system is bright zinc-plated

shelf 100,3 meters comprising:
-stand 60 x 300 x 40 cm.
-trusses 472 x 165 x 7,5 cm.

-load: 230 kg per compartment, evenly distributed loads.

-flat per box: 4 x storage levels for tires / wheels.

-multiple available!

price:
â?¬5200 net
â?¬6188 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.
 TIRE RACK BIKE RACK GARAGE SHELF VINTAGE CAMERAS DATA: -H: 300 CM -T: APPROX. 40 CM -L: APPROX. 100,3 YDS -OFFER -USED - GOOD CONDITION -RACKS AND CROSSBARS IN BRIGHT ZINC-PLATED -CONNECT SYSTEM IS BRIGHT ZINC-PLATED SHELF 100,3 METERS COMPRISING: -STAND 60 X 300 X 40 CM. -TRUSSES 472 X 165 X 7,5 CM. -LOAD: 230 KG PER COMPARTMENT, EVENLY DISTRIBUTED LOADS. -FLAT PER BOX: 4 X STORAGE LEVELS FOR TIRES / WHEELS. -MULTIPLE AVAILABLE! PRICE: &ACIRC;?&NOT;5200 NET &ACIRC;?&NOT;6188 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 400 mm<br/>description: video surveillance kit complete with 4 cameras WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 400 MM
DESCRIPTION: VIDEO SURVEILLANCE KIT COMPLETE WITH 4 CAMERAS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 7.280 €
Ubicación: Land-pallet racks heavy load shelves slp 100 yds

data:
-h: 800 cm
-t: approx. 110 cm
-l: approximately 100.8 m

-vintage cameras
-1000 kg per pallet space
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-stand 37 x 800 cm
-traverse 216 x 270 cm
-levels: ground + 3

price:
â?¬7280 net
â?¬8663,20 gross
you will receive an invoice with expelled vat

shelf stand at different heights in stock!

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. PALLET RACKS HEAVY LOAD SHELVES SLP 100 YDS DATA: -H: 800 CM -T: APPROX. 110 CM -L: APPROXIMATELY 100.8 M -VINTAGE CAMERAS -1000 KG PER PALLET SPACE -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -STAND 37 X 800 CM -TRAVERSE 216 X 270 CM -LEVELS: GROUND + 3 PRICE: &ACIRC;?&NOT;7280 NET &ACIRC;?&NOT;8663,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT SHELF STAND AT DIFFERENT HEIGHTS IN STOCK! ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 6.880 €
Ubicación: Land-pallet racks heavy load shelves jungheinrich mpb 102 yds

data:
-h: 720 cm
-t: approx. 110 cm
-l: approx. 102 yds

-vintage cameras
-600 kg per pallet spaces, evenly distributed loads.
-stand blue
-trusses 299 cm
-trusses in yellow

shelf consists of:
-35 x stand ca. 720 x 110 cm.
-traverse 204 x 299 cm
-levels: ground + 3

price:
â?¬6880 net
â?¬8187,20 gross
you will receive an invoice with expelled vat

shelf stand at different heights in stock!

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible.
 PALLET RACKS HEAVY LOAD SHELVES JUNGHEINRICH MPB 102 YDS DATA: -H: 720 CM -T: APPROX. 110 CM -L: APPROX. 102 YDS -VINTAGE CAMERAS -600 KG PER PALLET SPACES, EVENLY DISTRIBUTED LOADS. -STAND BLUE -TRUSSES 299 CM -TRUSSES IN YELLOW SHELF CONSISTS OF: -35 X STAND CA. 720 X 110 CM. -TRAVERSE 204 X 299 CM -LEVELS: GROUND + 3 PRICE: &ACIRC;?&NOT;6880 NET &ACIRC;?&NOT;8187,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT SHELF STAND AT DIFFERENT HEIGHTS IN STOCK! ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-rolling capacity max.: t<br/>workpiece diameter:80 mm<br/>workpiece length:520 mm<br/>total power requirement:35 kw<br/>weight of the machine ca.:8 t<br/>dimensions of the machine ca.:3,9 x 1,9 x 3,1 m<br/>max. length of teeth cutting:700 mm<br/>speeds of rolling head (continued):0-3500 u/min<br/>max. workpiece diameter:315 mm<br/>max. module:2.25 <br/>automatic workpiece feed:0-1000 mm/min<br/>root circle dia. min.:8 mm<br/>feeds::0-10000 <br/><br/>a like-new cold rolling machine grob c6a directly from the pre-owner  description with siemens sinumerik 840 d cnc control for 5 axes soundproof cabin loading and unloading device counter tip device with guide bushing dmc-camera eks original price fyi approx. ? 1.4 million the machine can still be visited at the pre-owner\'s in hungary. ROLLING CAPACITY MAX.: T
WORKPIECE DIAMETER:80 MM
WORKPIECE LENGTH:520 MM
TOTAL POWER REQUIREMENT:35 KW
WEIGHT OF THE MACHINE CA.:8 T
DIMENSIONS OF THE MACHINE CA.:3,9 X 1,9 X 3,1 M
MAX. LENGTH OF TEETH CUTTING:700 MM
SPEEDS OF ROLLING HEAD (CONTINUED):0-3500 U/MIN
MAX. WORKPIECE DIAMETER:315 MM
MAX. MODULE:2.25
AUTOMATIC WORKPIECE FEED:0-1000 MM/MIN
ROOT CIRCLE DIA. MIN.:8 MM
FEEDS::0-10000

A LIKE-NEW COLD ROLLING MACHINE GROB C6A DIRECTLY FROM THE PRE-OWNER DESCRIPTION WITH SIEMENS SINUMERIK 840 D CNC CONTROL FOR 5 AXES SOUNDPROOF CABIN LOADING AND UNLOADING DEVICE COUNTER TIP DEVICE WITH GUIDE BUSHING DMC-CAMERA EKS ORIGINAL PRICE FYI APPROX. ? 1.4 MILLION THE MACHINE CAN STILL BE VISITED AT THE PRE-OWNER\'S IN HUNGARY.
Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Precio: 2.880 €
Ubicación: Land-pallet racks heavy load shelves slp 39.2 yds

data:
-h: 800 cm
-t: approx. 110 cm
-l: approx. 39.2 yds

-vintage cameras
-1000 kg per pallet space
-stand blue
-traverses 270 cm
-trusses in orange

shelf consists of:
-stand 15 x 800 cm
-traverse 84 x 270 cm
-levels: ground + 3

price:
â?¬2880 net
â?¬3427,20 gross
you will receive an invoice with expelled vat

shelf stand at different heights in stock!

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly. PALLET RACKS HEAVY LOAD SHELVES SLP 39.2 YDS DATA: -H: 800 CM -T: APPROX. 110 CM -L: APPROX. 39.2 YDS -VINTAGE CAMERAS -1000 KG PER PALLET SPACE -STAND BLUE -TRAVERSES 270 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -STAND 15 X 800 CM -TRAVERSE 84 X 270 CM -LEVELS: GROUND + 3 PRICE: &ACIRC;?&NOT;2880 NET &ACIRC;?&NOT;3427,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT SHELF STAND AT DIFFERENT HEIGHTS IN STOCK! ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 14.500 €
Ubicación: Land-serial number: 0-240-14-1771 <br/>weight approx.: 13000 kg<br/>cutting length: 4300 mm<br/>control: power control, ipc <br/>dimensions (l x w x h) approx.: 15000 x 2400 x 2400 mm<br/>cutting height: 124 mm<br/>main motor: 18 kw<br/>scoring saw: 2,2 kw<br/>cutting depth: 4250 / 7000 mm<br/>software: cadmatic 4.0 <br/>saw blade protection: 125 mm<br/>max. opening of clamps: 130 mm<br/>clamps piece: 2-fing., 7 piece<br/>main saw blade: max. 450  mm<br/>scoring saw blade: max. 340 mm<br/>air table: 4 <br/>lift table: nein / no <br/>saw carriage speed forward: 5 - 150 m/min<br/>saw carriage speed reverse: 150 m/min<br/>program fence speed forward: 80 m/min<br/>program fence speed reverse: 80 m/min<br/>total power approx: 27 kw<br/>description: <b>holzma hpp 10/43/43 panel saw with label printer</b><br> <br> plate size max.: 4100 x 2070 mm,<br> plate size min.: 2440 x 600 mm,<br> plate thickness max.: 35 mm,<br> plate thickness min.: 3 mm (from rear), 0.8 mm (from front),<br> panel height max.: 80 mm,<br> package height for finished cut max.: 70 mm,<br> finished part size min.: 50 x 50 mm,<br> monitor: 17 inch tft flat-panel display,<br> working height: 1020 mm,<br> required air pressure: 6 bar,<br> compressed air requirement: 210 nl/min,<br> v at suction socket: approx. 26m/s,<br> negative pressure min: 1200 pa,<br> exhaust air volume: 5800 m3/h,<br> label printer: type pica 104,<br> camera monitoring of the loading area,<br> suction connection chip channel: 1 piece 200 mm,<br> suction connection pressure beam: 2 pieces 150 mm,<br> features: tension-free sawing, program pusher travel 7000 mm, plate pre-storage on machine<br> <br> all bids subject to reservations - please see our notes provided in <i>special auction terms</i> SERIAL NUMBER: 0-240-14-1771
WEIGHT APPROX.: 13000 KG
CUTTING LENGTH: 4300 MM
CONTROL: POWER CONTROL, IPC
DIMENSIONS (L X W X H) APPROX.: 15000 X 2400 X 2400 MM
CUTTING HEIGHT: 124 MM
MAIN MOTOR: 18 KW
SCORING SAW: 2,2 KW
CUTTING DEPTH: 4250 / 7000 MM
SOFTWARE: CADMATIC 4.0
SAW BLADE PROTECTION: 125 MM
MAX. OPENING OF CLAMPS: 130 MM
CLAMPS PIECE: 2-FING., 7 PIECE
MAIN SAW BLADE: MAX. 450 MM
SCORING SAW BLADE: MAX. 340 MM
AIR TABLE: 4
LIFT TABLE: NEIN / NO
SAW CARRIAGE SPEED FORWARD: 5 - 150 M/MIN
SAW CARRIAGE SPEED REVERSE: 150 M/MIN
PROGRAM FENCE SPEED FORWARD: 80 M/MIN
PROGRAM FENCE SPEED REVERSE: 80 M/MIN
TOTAL POWER APPROX: 27 KW
DESCRIPTION: HOLZMA HPP 10/43/43 PANEL SAW WITH LABEL PRINTER

PLATE SIZE MAX.: 4100 X 2070 MM,
PLATE SIZE MIN.: 2440 X 600 MM,
PLATE THICKNESS MAX.: 35 MM,
PLATE THICKNESS MIN.: 3 MM (FROM REAR), 0.8 MM (FROM FRONT),
PANEL HEIGHT MAX.: 80 MM,
PACKAGE HEIGHT FOR FINISHED CUT MAX.: 70 MM,
FINISHED PART SIZE MIN.: 50 X 50 MM,
MONITOR: 17 INCH TFT FLAT-PANEL DISPLAY,
WORKING HEIGHT: 1020 MM,
REQUIRED AIR PRESSURE: 6 BAR,
COMPRESSED AIR REQUIREMENT: 210 NL/MIN,
V AT SUCTION SOCKET: APPROX. 26M/S,
NEGATIVE PRESSURE MIN: 1200 PA,
EXHAUST AIR VOLUME: 5800 M3/H,
LABEL PRINTER: TYPE PICA 104,
CAMERA MONITORING OF THE LOADING AREA,
SUCTION CONNECTION CHIP CHANNEL: 1 PIECE 200 MM,
SUCTION CONNECTION PRESSURE BEAM: 2 PIECES 150 MM,
FEATURES: TENSION-FREE SAWING, PROGRAM PUSHER TRAVEL 7000 MM, PLATE PRE-STORAGE ON MACHINE

ALL BIDS SUBJECT TO RESERVATIONS - PLEASE SEE OUR NOTES PROVIDED IN SPECIAL AUCTION TERMS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.480 €
Ubicación: Land-pallet racks heavy load shelves jungheinrich mpb 100 yds

data:
-h: 600 cm
-t: approx. 110 cm
-l: approx. 100 yds

-vintage cameras
-600 kg per pallet spaces, evenly distributed loads.
-stand blue
-traverses 360 cm
-trusses in yellow

shelf consists of:
-028 x stand ca. 600 x 110 cm.
-traverse 108 x 360 cm (4-room system).
-incl. locking pins.
-levels: ground + 2

price:
â?¬5480 net
â?¬6521,20 gross
you will receive an invoice with expelled vat

shelf stand at different heights in stock!

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.
 PALLET RACKS HEAVY LOAD SHELVES JUNGHEINRICH MPB 100 YDS DATA: -H: 600 CM -T: APPROX. 110 CM -L: APPROX. 100 YDS -VINTAGE CAMERAS -600 KG PER PALLET SPACES, EVENLY DISTRIBUTED LOADS. -STAND BLUE -TRAVERSES 360 CM -TRUSSES IN YELLOW SHELF CONSISTS OF: -028 X STAND CA. 600 X 110 CM. -TRAVERSE 108 X 360 CM (4-ROOM SYSTEM). -INCL. LOCKING PINS. -LEVELS: GROUND + 2 PRICE: &ACIRC;?&NOT;5480 NET &ACIRC;?&NOT;6521,20 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT SHELF STAND AT DIFFERENT HEIGHTS IN STOCK! ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeling machine krones multimodule ii psl, 55.000 bph  
  
this labeling machine was manufactured in year 2010 by krones and it has been operated very limited hours till january 2014. it has six plug-in type aps (autarkic pressure sensitive) 4-spender labeling stations for pressure sensitive self-adhesive film labels and tree plug-in type gold clue paper labeling stations. the capacity of this multimodule labeler is upto 55000 bph in 0.33 and 0.50 liter glass bottles. paper labels to be placed on front-back-neck of a bottle. each container plate on the container table is powered by a computer-controlled servo motor. the bottle rotations required for rolling on the labels are camera controlled and conducted according to a set program. when changing over to a new type label, no mechanical cam needs to be changed. multimodule is operated from a touch screen which contains also a comprehensive diagnostic functions and detailed malfunctioning warnings. 
 
the machine was dismantled in 2016 very professionally under the supervision of krones and it has original krones transport support frame for transportation. labeling machine was in line with krones tree section bottle air dryer and krones label & filling level inspector checkmat which are available and can be sold at separate price. note: date coder is not a part of scope.  
 
technical data
manufacturer                          krones ag
type                                        multimodule ii psl 2400-60-125.6 
manufacturing year                 2010
total operating hour               approx. 12000
krones serial nr                       k 408-179 
capacity                                  55 000 bph 
number of stations                 60 
carousel diameter                   2400 mm
pitch                                        125.6 mm  
stations                                   6 stations for plastic for self-adhesive ps labels
                                                3 stations for paper labels, gold clue
control plc                            siemens s7-300 

optional checkmat                 serial no k 731h47
optional bottle dryer             krones linadry s with 3 modules  

 LABELING MACHINE KRONES MULTIMODULE II PSL, 55.000 BPH THIS LABELING MACHINE WAS MANUFACTURED IN YEAR 2010 BY KRONES AND IT HAS BEEN OPERATED VERY LIMITED HOURS TILL JANUARY 2014. IT HAS SIX PLUG-IN TYPE APS (AUTARKIC PRESSURE SENSITIVE) 4-SPENDER LABELING STATIONS FOR PRESSURE SENSITIVE SELF-ADHESIVE FILM LABELS AND TREE PLUG-IN TYPE GOLD CLUE PAPER LABELING STATIONS. THE CAPACITY OF THIS MULTIMODULE LABELER IS UPTO 55000 BPH IN 0.33 AND 0.50 LITER GLASS BOTTLES. PAPER LABELS TO BE PLACED ON FRONT-BACK-NECK OF A BOTTLE. EACH CONTAINER PLATE ON THE CONTAINER TABLE IS POWERED BY A COMPUTER-CONTROLLED SERVO MOTOR. THE BOTTLE ROTATIONS REQUIRED FOR ROLLING ON THE LABELS ARE CAMERA CONTROLLED AND CONDUCTED ACCORDING TO A SET PROGRAM. WHEN CHANGING OVER TO A NEW TYPE LABEL, NO MECHANICAL CAM NEEDS TO BE CHANGED. MULTIMODULE IS OPERATED FROM A TOUCH SCREEN WHICH CONTAINS ALSO A COMPREHENSIVE DIAGNOSTIC FUNCTIONS AND DETAILED MALFUNCTIONING WARNINGS. THE MACHINE WAS DISMANTLED IN 2016 VERY PROFESSIONALLY UNDER THE SUPERVISION OF KRONES AND IT HAS ORIGINAL KRONES TRANSPORT SUPPORT FRAME FOR TRANSPORTATION. LABELING MACHINE WAS IN LINE WITH KRONES TREE SECTION BOTTLE AIR DRYER AND KRONES LABEL & FILLING LEVEL INSPECTOR CHECKMAT WHICH ARE AVAILABLE AND CAN BE SOLD AT SEPARATE PRICE. NOTE: DATE CODER IS NOT A PART OF SCOPE. TECHNICAL DATA MANUFACTURER KRONES AG TYPE MULTIMODULE II PSL 2400-60-125.6 MANUFACTURING YEAR 2010 TOTAL OPERATING HOUR APPROX. 12000 KRONES SERIAL NR K 408-179 CAPACITY 55 000 BPH NUMBER OF STATIONS 60 CAROUSEL DIAMETER 2400 MM PITCH 125.6 MM STATIONS 6 STATIONS FOR PLASTIC FOR SELF-ADHESIVE PS LABELS 3 STATIONS FOR PAPER LABELS, GOLD CLUE CONTROL PLC SIEMENS S7-300 OPTIONAL CHECKMAT SERIAL NO K 731H47 OPTIONAL BOTTLE DRYER KRONES LINADRY S WITH 3 MODULES
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 117 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 400 mm<br/>description: video surveillance kit complete with 4 cameras WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 400 MM
DESCRIPTION: VIDEO SURVEILLANCE KIT COMPLETE WITH 4 CAMERAS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-nc - round / cam grinding machine, second-hand
â    cnc cylindrical / cam shaft grinding machine, used
manufacturer / make: kopp werkzeugmaschinen gmbh year / year: 1996
type / model: sn 800
control / control: cnc brã¼tsch tps 3000

swing / swing: 450 mm
tip height / height of center: 285 mm
workpiece length / working length 650 mm
workpiece spindle / spindle work pice: 0.01... 25 k rpm / / rpm
bore diameter / hole in spindle: 90 mm

grinding unit travel - x: / travel x 470 mm (infeed)
wst sled travel z: / travel z: 800 mm
grinding wheel diameter / diam. of wheel: min. 380mm / max 500 mm
grinding wheel width / width of wheel: 40 mm grinding spindle speed / speed of grind.wheel:... 4000 rpm wz recording / tooling internal diam: max d = 350 mm
workpiece weight / weight of worj: 50 kg rapid / rapid travel: 15000 mm / min
connected load 63 kw, 380/400v / port value
weight machines / machine weight: approx. 11.5 t

specification: incremental angular measuring system: workpiece gearbox (c-axis) coolant nozzle tracking (w axis)
                                                                                     runner (x-axis)
                                                                                     workpiece carriage (z axis)

accessories stock wheels / stock of grinding wheels
NC - ROUND / CAM GRINDING MACHINE, SECOND-HAND &ACIRC;&NBSP; CNC CYLINDRICAL / CAM SHAFT GRINDING MACHINE, USED MANUFACTURER / MAKE: KOPP WERKZEUGMASCHINEN GMBH YEAR / YEAR: 1996 TYPE / MODEL: SN 800 CONTROL / CONTROL: CNC BR&ATILDE;&FRAC14;TSCH TPS 3000 SWING / SWING: 450 MM TIP HEIGHT / HEIGHT OF CENTER: 285 MM WORKPIECE LENGTH / WORKING LENGTH 650 MM WORKPIECE SPINDLE / SPINDLE WORK PICE: 0.01... 25 K RPM / / RPM BORE DIAMETER / HOLE IN SPINDLE: 90 MM GRINDING UNIT TRAVEL - X: / TRAVEL X 470 MM (INFEED) WST SLED TRAVEL Z: / TRAVEL Z: 800 MM GRINDING WHEEL DIAMETER / DIAM. OF WHEEL: MIN. 380MM / MAX 500 MM GRINDING WHEEL WIDTH / WIDTH OF WHEEL: 40 MM GRINDING SPINDLE SPEED / SPEED OF GRIND.WHEEL:... 4000 RPM WZ RECORDING / TOOLING INTERNAL DIAM: MAX D = 350 MM WORKPIECE WEIGHT / WEIGHT OF WORJ: 50 KG RAPID / RAPID TRAVEL: 15000 MM / MIN CONNECTED LOAD 63 KW, 380/400V / PORT VALUE WEIGHT MACHINES / MACHINE WEIGHT: APPROX. 11.5 T SPECIFICATION: INCREMENTAL ANGULAR MEASURING SYSTEM: WORKPIECE GEARBOX (C-AXIS) COOLANT NOZZLE TRACKING (W AXIS) RUNNER (X-AXIS) WORKPIECE CARRIAGE (Z AXIS) ACCESSORIES STOCK WHEELS / STOCK OF GRINDING WHEELS
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 1.250 €
Ubicación: Land-weight approx.: 1650 kg<br/>dimensions (l x w x h) approx.: 4450 x 1800 x 1550 mm<br/>description: bmw x1 with approx. 250.637 km, tÜv 07/2019, first registration july 2010, power 130 kw, color silver, number of doors 5, number of seats 5, diesel engine 2.0, 6-speed manual transmission, bmw infotainment system with navigation system, air conditioning, backup camera, electric windows, trailer hitch tires 225/50/r17 (rockfall in the windscreen, error messages: park distance control and particle filter!) WEIGHT APPROX.: 1650 KG
DIMENSIONS (L X W X H) APPROX.: 4450 X 1800 X 1550 MM
DESCRIPTION: BMW X1 WITH APPROX. 250.637 KM, TÜV 07/2019, FIRST REGISTRATION JULY 2010, POWER 130 KW, COLOR SILVER, NUMBER OF DOORS 5, NUMBER OF SEATS 5, DIESEL ENGINE 2.0, 6-SPEED MANUAL TRANSMISSION, BMW INFOTAINMENT SYSTEM WITH NAVIGATION SYSTEM, AIR CONDITIONING, BACKUP CAMERA, ELECTRIC WINDOWS, TRAILER HITCH TIRES 225/50/R17 (ROCKFALL IN THE WINDSCREEN, ERROR MESSAGES: PARK DISTANCE CONTROL AND PARTICLE FILTER!)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-was used for printing on flat fleece, working width: 400mm, max. speed: 250m/min, connected load: 38kw, weight: 4.8t, consists of one unwinder with 2 unwinding sleeves and one splicing unit, suitable for single-color printing, additionally available are one high-voltage generator, stroboscope camera, 2x web guidances and one cross-cutting unit with 3 knives.  WAS USED FOR PRINTING ON FLAT FLEECE, WORKING WIDTH: 400MM, MAX. SPEED: 250M/MIN, CONNECTED LOAD: 38KW, WEIGHT: 4.8T, CONSISTS OF ONE UNWINDER WITH 2 UNWINDING SLEEVES AND ONE SPLICING UNIT, SUITABLE FOR SINGLE-COLOR PRINTING, ADDITIONALLY AVAILABLE ARE ONE HIGH-VOLTAGE GENERATOR, STROBOSCOPE CAMERA, 2X WEB GUIDANCES AND ONE CROSS-CUTTING UNIT WITH 3 KNIVES.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 127 €
Ubicación: Land-weight approx.: 2 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 100 mm<br/>description: see photos WEIGHT APPROX.: 2 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 100 MM
DESCRIPTION: SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-wheel profiling and dressing machine,
made by farman, model fc?250w, year 2018

description:
machine designed for profiling and dressing flats, side, angular, radius and special shapes on
diamond and cbn wheels. especially suitable for single or multiple wheel packs.

specifications:
wheel spindle taper: hsk50f, max diameter diamond wheel: 50 - 250 mm, max wheel width: 70 mm, wheel hole diameter: 20, wheel speed: 100 – 1000 rpm (infinitely variable), wheel radius: 0 – r30 mm,
dressing wheel (sic) 180x25x31,75 mm, dressing wheel speed 200 – 2000 rpm, dressing wheel oscillating stroke 0?70 mm, dressing wheel motor power 0,75 kw, weight approx. 900 kg, dimensions w x d x h 1165 x 1150 x 1950 cm, connected load (380v – 50 hz).colour grey.

accessories:
2 machine lights 12 v,
coolant system (30 litres tank with paper filter),
optical linear scale with digital display counter (0,001 mm) x, z axes,
2/3” tv camera with 15” lcd monitor (microscope with zoom 15?120 factor zoom included),
high performance swivelling angle reader (0,05°),
diamond / cbn wheel spindle speed stepless adjustable 100 - 1000 rpm,
turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,
stepless oscillation speed,
central lubrication WHEEL PROFILING AND DRESSING MACHINE, MADE BY FARMAN, MODEL FC?250W, YEAR 2018 DESCRIPTION: MACHINE DESIGNED FOR PROFILING AND DRESSING FLATS, SIDE, ANGULAR, RADIUS AND SPECIAL SHAPES ON DIAMOND AND CBN WHEELS. ESPECIALLY SUITABLE FOR SINGLE OR MULTIPLE WHEEL PACKS. SPECIFICATIONS: WHEEL SPINDLE TAPER: HSK50F, MAX DIAMETER DIAMOND WHEEL: 50 - 250 MM, MAX WHEEL WIDTH: 70 MM, WHEEL HOLE DIAMETER: 20, WHEEL SPEED: 100 – 1000 RPM (INFINITELY VARIABLE), WHEEL RADIUS: 0 – R30 MM, DRESSING WHEEL (SIC) 180X25X31,75 MM, DRESSING WHEEL SPEED 200 – 2000 RPM, DRESSING WHEEL OSCILLATING STROKE 0?70 MM, DRESSING WHEEL MOTOR POWER 0,75 KW, WEIGHT APPROX. 900 KG, DIMENSIONS W X D X H 1165 X 1150 X 1950 CM, CONNECTED LOAD (380V – 50 HZ).COLOUR GREY. ACCESSORIES: 2 MACHINE LIGHTS 12 V, COOLANT SYSTEM (30 LITRES TANK WITH PAPER FILTER), OPTICAL LINEAR SCALE WITH DIGITAL DISPLAY COUNTER (0,001 MM) X, Z AXES, 2/3” TV CAMERA WITH 15” LCD MONITOR (MICROSCOPE WITH ZOOM 15?120 FACTOR ZOOM INCLUDED), HIGH PERFORMANCE SWIVELLING ANGLE READER (0,05°), DIAMOND / CBN WHEEL SPINDLE SPEED STEPLESS ADJUSTABLE 100 - 1000 RPM, TURNING SPEED OF DRESSING WHEEL STEPLESS ADJUSTABLE 200 - 2000 RPM, STEPLESS OSCILLATION SPEED, CENTRAL LUBRICATION
Vendedor: SuS Schleiftechnik und Maschinenhandel GmbH
Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-multifoiler press\r\nbrand: bürkle \r\ntype: btf 1528-1400 flowline\r\nyear: 2007\r\n\r\nwith paternoster\r\n\r\nhigh-performance system for the membrane-free thermoforming of smooth and shaped mdf parts with thermoplastic foils.\r\n\r\ntechnical data:\r\n\r\n1. surface material:\r\nfrom the roll, or as a blank cut \r\na) pvc foil 0.30 - 1.0 mm\r\nb) high gloss foil 0,50 - 1,0 mm\r\nc) pet foil 0.35 - 0.6 mm\r\nall foils suitable for the bürkle thermoform process.\r\n\r\n2. carrier material:\r\nmdf board, with smooth profiled surfaces.\r\nthickness tolerance +/- 0.15 mm\r\n\r\n3. adhesives:\r\ndispersion adhesive 80 - 150 g / m²\r\nfor foils, 1-component or 2-component polyurethane adhesive.\r\n\r\ntechnology\r\n\r\nthermoform coating, without membrane, 1400 mm foil\r\neffective area 1330 x 2630 mm\r\nmax. work piece size 1250 x 2550 mm\r\nmin. foil width 1400 mm\r\nsealing dimensions 1370 m (u.u 1360 mm)\r\nwork piece thickness 16 - 38 mm\r\n\r\nworkflow on the entire flowline:\r\n1. positioning of the work piece on the same tray.\r\n2. detecting the work peice positions using a digital camera.\r\n3. cover with foil from the foil paternoster.\r\n4. load the laying pallet into the multifoiler.\r\n5. placing the sheet in the multipin system within the press while entering the press.\r\n6. process of coating without membrane in the process chamber of the multifoilers.\r\npreheat the foil, vacuum and shape with shaping pressure to max. 6 bar.\r\n7. discharge the entire batch into the rotary turner / multiturning.\r\n8. turn the laying pallet with the work piece around the longitudinal axis.\r\n9. discharge of the work pieces on a conveyor belt and transport from the turner.\r\n10. direct, manual cutting with finished cut (trimming) on the conveyor belt.\r\nalternative:\r\n20 cycles per hour, with commercially available foils.\r\nglossy foils have a longer cycle time due to longer warm-up times.\r\n\r\nimplementation of plants\r\n\r\npos. 10 1 receiving and loading station\r\n\r\npos. 20 1 bürkle - multifolier model btf 1528\r\ntechnical data:\r\nhotplate size: 1500 x 2800 mm\r\nloading side: 1500 mm\r\nmax. heating temperature 140 ° c\r\noperating side: right\r\n\r\nlifting, lowering and locking the press table with hydraulic.\r\n\r\n1 upper sealing frame, 15 mm\r\nattached to upper heating plate with quick clamping system.\r\n\r\n1 vacuum device\r\nwith vacuum pump and reservoir.\r\n\r\npos. 21 1 chain conveyor\r\ndriven, reversible, frequency controlled, in the press.\r\n\r\npos. 22 1 chain conveyor\r\ndriven, frequency controlled, under the press\r\n\r\npos. 23 3 lay pallets\r\n\r\npos. 25 1 bürkle multi-pin system\r\nfully automatic sub-system for the membraneless coating of milled mdf parts.\r\n\r\nfunction:\r\n1. the workpieces are placed as before in the laying pallet with the usual distances, but without sub-parts.\r\n2. an lcd matrix camera captures the image and stores it digitally with a very fine resolution of approx. 2 x 2 mm.\r\n3. a special software calculates the respective pins matching the image and initiates the setting of the pins in the btf.\r\n4. the round pins are located in a maintenance-friendly, solid metal block inside the multifoilers.\r\n5. the new laying pattern is set immediately after leaving the laying pallet, or during the new loading of the btf time-saving.\r\n6. the occupied pallet inverts over the finished set sheet and the coating process can begin as known.\r\n\r\npos. 30 1 bürkle multi-turning\r\nautomatic turning station for foil-coated work piece batches with integrated lifting device.\r\nfunction:\r\nthe full laying pallet travels from the btf to the rotary turner after coating. a conveyor belt lowers and clamps the entire batch with the pallet. the entire installation revolves around 180 degrees.\r\n\r\npos. 31 1 piece belt transport\r\n\r\npos. 61 1 foil discharger / discharging\r\nfor unloading the foils during static charges.\r\nto avoid foil contamination\r\nsuitable for 1 foil unwinding station\r\n\r\npos. 10 a paternoster\r\nfor 23 rolls (Ø 400 mm)\r\nproduct width: 1600 mm\r\nconstruction height: 5400 mm\r\noverall width: 2370 mm\r\nincl. 1 piece roll transport\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding. MULTIFOILER PRESS\R\NBRAND: BüRKLE \R\NTYPE: BTF 1528-1400 FLOWLINE\R\NYEAR: 2007\R\N\R\NWITH PATERNOSTER\R\N\R\NHIGH-PERFORMANCE SYSTEM FOR THE MEMBRANE-FREE THERMOFORMING OF SMOOTH AND SHAPED MDF PARTS WITH THERMOPLASTIC FOILS.\R\N\R\NTECHNICAL DATA:\R\N\R\N1. SURFACE MATERIAL:\R\NFROM THE ROLL, OR AS A BLANK CUT \R\NA) PVC FOIL 0.30 - 1.0 MM\R\NB) HIGH GLOSS FOIL 0,50 - 1,0 MM\R\NC) PET FOIL 0.35 - 0.6 MM\R\NALL FOILS SUITABLE FOR THE BüRKLE THERMOFORM PROCESS.\R\N\R\N2. CARRIER MATERIAL:\R\NMDF BOARD, WITH SMOOTH PROFILED SURFACES.\R\NTHICKNESS TOLERANCE +/- 0.15 MM\R\N\R\N3. ADHESIVES:\R\NDISPERSION ADHESIVE 80 - 150 G / M²\R\NFOR FOILS, 1-COMPONENT OR 2-COMPONENT POLYURETHANE ADHESIVE.\R\N\R\NTECHNOLOGY\R\N\R\NTHERMOFORM COATING, WITHOUT MEMBRANE, 1400 MM FOIL\R\NEFFECTIVE AREA 1330 X 2630 MM\R\NMAX. WORK PIECE SIZE 1250 X 2550 MM\R\NMIN. FOIL WIDTH 1400 MM\R\NSEALING DIMENSIONS 1370 M (U.U 1360 MM)\R\NWORK PIECE THICKNESS 16 - 38 MM\R\N\R\NWORKFLOW ON THE ENTIRE FLOWLINE:\R\N1. POSITIONING OF THE WORK PIECE ON THE SAME TRAY.\R\N2. DETECTING THE WORK PEICE POSITIONS USING A DIGITAL CAMERA.\R\N3. COVER WITH FOIL FROM THE FOIL PATERNOSTER.\R\N4. LOAD THE LAYING PALLET INTO THE MULTIFOILER.\R\N5. PLACING THE SHEET IN THE MULTIPIN SYSTEM WITHIN THE PRESS WHILE ENTERING THE PRESS.\R\N6. PROCESS OF COATING WITHOUT MEMBRANE IN THE PROCESS CHAMBER OF THE MULTIFOILERS.\R\NPREHEAT THE FOIL, VACUUM AND SHAPE WITH SHAPING PRESSURE TO MAX. 6 BAR.\R\N7. DISCHARGE THE ENTIRE BATCH INTO THE ROTARY TURNER / MULTITURNING.\R\N8. TURN THE LAYING PALLET WITH THE WORK PIECE AROUND THE LONGITUDINAL AXIS.\R\N9. DISCHARGE OF THE WORK PIECES ON A CONVEYOR BELT AND TRANSPORT FROM THE TURNER.\R\N10. DIRECT, MANUAL CUTTING WITH FINISHED CUT (TRIMMING) ON THE CONVEYOR BELT.\R\NALTERNATIVE:\R\N20 CYCLES PER HOUR, WITH COMMERCIALLY AVAILABLE FOILS.\R\NGLOSSY FOILS HAVE A LONGER CYCLE TIME DUE TO LONGER WARM-UP TIMES.\R\N\R\NIMPLEMENTATION OF PLANTS\R\N\R\NPOS. 10 1 RECEIVING AND LOADING STATION\R\N\R\NPOS. 20 1 BüRKLE - MULTIFOLIER MODEL BTF 1528\R\NTECHNICAL DATA:\R\NHOTPLATE SIZE: 1500 X 2800 MM\R\NLOADING SIDE: 1500 MM\R\NMAX. HEATING TEMPERATURE 140 ° C\R\NOPERATING SIDE: RIGHT\R\N\R\NLIFTING, LOWERING AND LOCKING THE PRESS TABLE WITH HYDRAULIC.\R\N\R\N1 UPPER SEALING FRAME, 15 MM\R\NATTACHED TO UPPER HEATING PLATE WITH QUICK CLAMPING SYSTEM.\R\N\R\N1 VACUUM DEVICE\R\NWITH VACUUM PUMP AND RESERVOIR.\R\N\R\NPOS. 21 1 CHAIN CONVEYOR\R\NDRIVEN, REVERSIBLE, FREQUENCY CONTROLLED, IN THE PRESS.\R\N\R\NPOS. 22 1 CHAIN CONVEYOR\R\NDRIVEN, FREQUENCY CONTROLLED, UNDER THE PRESS\R\N\R\NPOS. 23 3 LAY PALLETS\R\N\R\NPOS. 25 1 BüRKLE MULTI-PIN SYSTEM\R\NFULLY AUTOMATIC SUB-SYSTEM FOR THE MEMBRANELESS COATING OF MILLED MDF PARTS.\R\N\R\NFUNCTION:\R\N1. THE WORKPIECES ARE PLACED AS BEFORE IN THE LAYING PALLET WITH THE USUAL DISTANCES, BUT WITHOUT SUB-PARTS.\R\N2. AN LCD MATRIX CAMERA CAPTURES THE IMAGE AND STORES IT DIGITALLY WITH A VERY FINE RESOLUTION OF APPROX. 2 X 2 MM.\R\N3. A SPECIAL SOFTWARE CALCULATES THE RESPECTIVE PINS MATCHING THE IMAGE AND INITIATES THE SETTING OF THE PINS IN THE BTF.\R\N4. THE ROUND PINS ARE LOCATED IN A MAINTENANCE-FRIENDLY, SOLID METAL BLOCK INSIDE THE MULTIFOILERS.\R\N5. THE NEW LAYING PATTERN IS SET IMMEDIATELY AFTER LEAVING THE LAYING PALLET, OR DURING THE NEW LOADING OF THE BTF TIME-SAVING.\R\N6. THE OCCUPIED PALLET INVERTS OVER THE FINISHED SET SHEET AND THE COATING PROCESS CAN BEGIN AS KNOWN.\R\N\R\NPOS. 30 1 BüRKLE MULTI-TURNING\R\NAUTOMATIC TURNING STATION FOR FOIL-COATED WORK PIECE BATCHES WITH INTEGRATED LIFTING DEVICE.\R\NFUNCTION:\R\NTHE FULL LAYING PALLET TRAVELS FROM THE BTF TO THE ROTARY TURNER AFTER COATING. A CONVEYOR BELT LOWERS AND CLAMPS THE ENTIRE BATCH WITH THE PALLET. THE ENTIRE INSTALLATION REVOLVES AROUND 180 DEGREES.\R\N\R\NPOS. 31 1 PIECE BELT TRANSPORT\R\N\R\NPOS. 61 1 FOIL DISCHARGER / DISCHARGING\R\NFOR UNLOADING THE FOILS DURING STATIC CHARGES.\R\NTO AVOID FOIL CONTAMINATION\R\NSUITABLE FOR 1 FOIL UNWINDING STATION\R\N\R\NPOS. 10 A PATERNOSTER\R\NFOR 23 ROLLS (Ø 400 MM)\R\NPRODUCT WIDTH: 1600 MM\R\NCONSTRUCTION HEIGHT: 5400 MM\R\NOVERALL WIDTH: 2370 MM\R\NINCL. 1 PIECE ROLL TRANSPORT\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-signature rotobraille

age: 2015

with high speed ejection cameras for bad boxes (where braille letter was not embossed correctly)

very nice condition- free of damages and ready to go.

machine has pre-makeready table

there are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines.

detection system in-sight.  SIGNATURE ROTOBRAILLE AGE: 2015 WITH HIGH SPEED EJECTION CAMERAS FOR BAD BOXES (WHERE BRAILLE LETTER WAS NOT EMBOSSED CORRECTLY) VERY NICE CONDITION- FREE OF DAMAGES AND READY TO GO. MACHINE HAS PRE-MAKEREADY TABLE THERE ARE 8 TOP AND 8 BOTTOM DRUMS- 4 WITH FOUR LINES AND 4 WITH FIVE LINES. DETECTION SYSTEM IN-SIGHT.
Vendedor: Astrographic D.O.O.
Año de construcción: usado
Ubicación: Land-automatic crosscut with pusher, working right to left<br/>pusher with fluo-recognising camera and length measuring<br/>input length material: max 4500 mm<br/>width of wood: min 20 mm - max 300 mm<br/>wood thickness: min 10 mm - max 100 mm<br/>max diameter for saw blade diameter 500mm: 300mm x 100mm<br/>length of sawed pieces: min 80mm<br/>saw blade diameter 500 mm.<br/>saw motor 7.5 kw<br/>feed speed pusher approx. 60 m / min<br/>integrated waste shaft<br/>export transport with sorting station 5 m. length with 4 pushers<br/><br/>pc with optimization software:<br/>- removing errors by means of chalk marking<br/>- least waste<br/>- length optimization<br/>- optimization number of pieces<br/>- optimization quality AUTOMATIC CROSSCUT WITH PUSHER, WORKING RIGHT TO LEFT
PUSHER WITH FLUO-RECOGNISING CAMERA AND LENGTH MEASURING
INPUT LENGTH MATERIAL: MAX 4500 MM
WIDTH OF WOOD: MIN 20 MM - MAX 300 MM
WOOD THICKNESS: MIN 10 MM - MAX 100 MM
MAX DIAMETER FOR SAW BLADE DIAMETER 500MM: 300MM X 100MM
LENGTH OF SAWED PIECES: MIN 80MM
SAW BLADE DIAMETER 500 MM.
SAW MOTOR 7.5 KW
FEED SPEED PUSHER APPROX. 60 M / MIN
INTEGRATED WASTE SHAFT
EXPORT TRANSPORT WITH SORTING STATION 5 M. LENGTH WITH 4 PUSHERS

PC WITH OPTIMIZATION SOFTWARE:
- REMOVING ERRORS BY MEANS OF CHALK MARKING
- LEAST WASTE
- LENGTH OPTIMIZATION
- OPTIMIZATION NUMBER OF PIECES
- OPTIMIZATION QUALITY
Vendedor: Vebim
Año de construcción: usado
Precio: 600 €
Ubicación: Land-storz telecam 20210030 pal camera head

sales commercial/dealer to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 

STORZ TELECAM 20210030 PAL CAMERA HEAD SALES COMMERCIAL/DEALER TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Ubicación: Land-28,6 to, wether roof, 2000 m drum, 330 mm deep, change holder ht 11, distance 15, nivel level pro 2+1, oversampling system left and right before drum,  camerasystem, cummins engine tier 3 and 3a, , waterpump and high presure cleaning system,, very nice and clean machine; power [ps]: 630; gross weight [kg]: 28670; engine: cummins qsl8.9+qsc8.3 28,6 TO, WETHER ROOF, 2000 M DRUM, 330 MM DEEP, CHANGE HOLDER HT 11, DISTANCE 15, NIVEL LEVEL PRO 2+1, OVERSAMPLING SYSTEM LEFT AND RIGHT BEFORE DRUM, CAMERASYSTEM, CUMMINS ENGINE TIER 3 AND 3A, , WATERPUMP AND HIGH PRESURE CLEANING SYSTEM,, VERY NICE AND CLEAN MACHINE; POWER [PS]: 630; GROSS WEIGHT [KG]: 28670; ENGINE: CUMMINS QSL8.9+QSC8.3
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 1.700 €
Ubicación: Land-manufacturer: topcon.
model: trc-50x.
retinal camera with sub table, mobile, with goto camera by ser. no.: 357432.
dimensions: 550 x 600 x 1660.
elek. voltage: 220v
elek. power: 1500va.

ps: on our homepage, you will find more different medical devices.
we are looking forward to your requests.
lg MANUFACTURER: TOPCON. MODEL: TRC-50X. RETINAL CAMERA WITH SUB TABLE, MOBILE, WITH GOTO CAMERA BY SER. NO.: 357432. DIMENSIONS: 550 X 600 X 1660. ELEK. VOLTAGE: 220V ELEK. POWER: 1500VA. PS: ON OUR HOMEPAGE, YOU WILL FIND MORE DIFFERENT MEDICAL DEVICES. WE ARE LOOKING FORWARD TO YOUR REQUESTS. LG
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1691</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030 fiber (l68)</td> </tr> <tr> <td>year:</td> <td>2015</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>23.119h / 9.912h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>20 mm</td> </tr> <tr> <td>max. speed:</td> <td>265 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,10  mm</td> </tr> <tr> <td>length:</td> <td>8000 mm</td> </tr> <tr> <td>width:</td> <td>4800 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg (grundmaschine)</td> </tr> </tbody> </table> <br> \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n<strong>machine</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>closed machine frame </h3> </li>\n	<li> </h3> </h3>integrated cabinet</h3> </li>\n	<li> </h3> </h3>automatic pallet changer lengthwise installation</h3> </li>\n	<li> </h3> </h3>torque drive in combination with direct linear drives</h3> </li>\n	<li> </h3> </h3>enclosed beam delivery via fiber optic cable</h3> </li>\n	<li> </h3> </h3>chiller for machine cooling (water-air)</h3> </li>\n	<li> </h3> </h3>integrated eletrical cabinets with inside light</h3> </li>\n	<li> </h3> </h3>power supply trudisk via the machine</h3> </li>\n	<li> </h3> </h3>longitudinal conveyor</h3> </li>\n	<li> </h3> </h3>working area lighting</h3> </li>\n	<li> </h3> </h3>positioning laser diode</h3> </li>\n	<li> </h3> </h3>spray device</h3> </li>\n	<li> </h3> </h3>pierceline</h3> </li>\n	<li> </h3> </h3>focusline</h3> </li>\n	<li> </h3> </h3>nitroline</h3> </li>\n	<li> </h3> </h3>plasmaline</h3> </li>\n	<li> </h3> </h3>automatic nozzle cleaning</h3> </li>\n</ul> </h3>\n</h3> \n<strong>trumpf laser </strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>solid state laser trudisk 5001 with 1 llk output </h3> </li>\n	<li> </h3> </h3>fiber optic cable according standard layout (laser next to the machine)</h3> </li>\n	<li> </h3> </h3>laser chiller unit (water-air)</h3> </li>\n	<li> </h3> </h3>stimulation via pump diodes</h3> </li>\n	<li> </h3> </h3>laser power control</h3> </li>\n</ul> </h3>\n</h3> \n</h3> \n<strong>cutting head</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>universal cutting head with complete adaptive lense system</h3> </li>\n	<li> </h3> </h3>one cutting head strategy</h3> </li>\n	<li> </h3> </h3>protection glass to avoid lense contamination</h3> </li>\n	<li> </h3> </h3>protection glass monitoring</h3> </li>\n	<li> </h3> </h3>controlline: height regulation and sheet edge detection</h3> </li>\n</ul> </h3>\n</h3> \n<strong>control</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>sinumerik 840d sl</h3> </li>\n	<li> </h3> </h3>19 touch panel</h3> </li>\n	<li> </h3> </h3>easy shop floor programming</h3> </li>\n	<li> </h3> </h3>fast reproduction</h3> </li>\n	<li> </h3> </h3>technology data is integrated</h3> </li>\n	<li> </h3> </h3>automatic shutdown</h3> </li>\n	<li> </h3> </h3>programmable cutting gas pressure</h3> </li>\n	<li> </h3> </h3>contourline</h3> </li>\n	<li> </h3> </h3>microweld</h3> </li>\n	<li> </h3> </h3>fastline</h3> </li>\n	<li> </h3> </h3>flyline</h3> </li>\n	<li> </h3> </h3>adjustline</h3> </li>\n	<li> </h3> </h3>teleservice via internet</h3> </li>\n</ul> </h3>\n</h3> \n<strong>data transmission</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>rj45 network connection </h3> </li>\n	<li> </h3> </h3>usb interface</h3> </li>\n</ul> </h3>\n</h3> \n<strong>safety</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>ce label</h3> </li>\n	<li> </h3> </h3>light barriers</h3> </li>\n	<li> </h3> </h3>multi-chamber extraction system </h3> </li>\n	<li> </h3> </h3>compact dust extractor</h3> </li>\n	<li> </h3> </h3>machine enclosure with certificated window (right door)</h3> </li>\n	<li> </h3> </h3>electrical curl up roof</h3> </li>\n</ul> </h3>\n</h3> \n</h3> <h3> <strong>additional equipment</strong> </h3>\n \n</h3>\n	<ul>\n	<li> </h3>smart nozzle automation (incl. nozzle changer, automatic nozzle inspection and smart skip)</h3> </li>\n	<li> </h3> </h3>copper cutting package (includes cutting data n2, o2) </h3> </li>\n	<li> </h3> </h3>brass cutting package (includes cutting data n2) </h3> </li>\n	<li> </h3> </h3>brightline fiber </h3> </li>\n	<li> </h3> </h3>coolline</h3> </li>\n	<li> </h3> </h3>detectline: precision sheet position sensing (incl. automatic focus measurement) </h3> </li>\n	<li> </h3> </h3>door window on left side for better insight</h3> </li>\n	<li> </h3> </h3>wide transverse conveyor belt with tilt container (container on the left side of the machine) </h3> </li>\n	<li> </h3> </h3>machine status lamp (incl. mdr interface) </h3> </li>\n	<li> </h3> </h3>integrated video camera (full hd) for process monitoring single picture transmission to network </h3> </li>\n	<li> </h3> </h3>drop & cut </h3> </li>\n	<li> </h3> </h3>co2 extinguishing device for compact dust extractor</h3> </li>\n</ul> </h3>\n</h3> \n</h3> <h3> <strong>installation</strong> </h3>\n \n\n	<ul>\n	<li> <strong> </strong> </h3>platform version machine without steel structure</h3> </li>\n</ul> </h3>\n</h3> \n</h3> <h3> <strong>automation</strong> </h3>\n \n<strong>liftmaster compact</strong> </h3>\n<strong> </strong> </h3> \n\n	<ul>\n	<li> <strong> </strong> </h3>basic configuration incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake(distance between the prongs 67 mm, changeable prongs) incl. raw material unpacking station, loading station, stack height up to 90 mm / 3 t, finished parts pallet and extended pallet pull-out on the machine</h3> </li>\n	<li> </h3> </h3>thin sheet separation for synchronous loader (s = 0,8 - 2,0 mm)</h3> </li>\n	<li> </h3> </h3>scratch-free, accurate unloading (incl. stainless steel rakes with belt prongs, distance between prongs 67 mm up to s = 15 mm)</h3> </li>\n</ul> </h3>\n</h3> \n<strong>partmaster integration trustore incl. partmaster</strong> </h3>\n<strong> </strong> </h3> \n<strong>trustore 3030</strong> </h3>\n</h3> \nbasic module storage tower for max. 12 shelves</h3>\nmax. sheet format: 3048 x 1524 mm</h3>\nmax. loading height per pallet: 90 / 170 mm</h3>\nmax. loading weight per pallet: 3 t</h3>\nsystem height:5550 mm</h3>\n</h3> \n</h3>\n	<ul>\n	<li> </h3>start post</h3> </li>\n	<li> </h3> </h3>store safety device</h3> </li>\n	<li> </h3> </h3>column covering</h3> </li>\n	<li> </h3> </h3>fork lift capable floor pallet for raw material</h3> </li>\n</ul> </h3>\n</h3> \n</h3> \n</h3>rack server</h3> </h3>\n</h3>\n	<ul>\n	<li> </h3>control panel</h3> </li>\n	<li> </h3> </h3>store safety device</h3> </li>\n	<li> </h3> </h3>store interface</h3> </li>\n	<li> </h3> </h3>switch cabinet lighting</h3> </li>\n	<li> </h3> </h3>teleservice via internet</h3> </li>\n	<li> </h3> </h3>lifting chain, e-chain</h3> </li>\n	<li> </h3> </h3>lifting speed 12 m/min</h3> </li>\n	<li> </h3> </h3>pull-out speed 30 m/min</h3> </li>\n	<li> </h3> </h3>lift acceleration 0,5 m/s²</h3> </li>\n</ul> </h3>\n</h3> \n</h3>

TECHNICAL DATA

ITEM NUMBER: LM-1691
MANUFACTURER: TRUMPF
TYPE: TRULASER 5030 FIBER (L68)
YEAR: 2015
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 5000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 23.119H / 9.912H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 20 MM
MAX. SHEET THICK./AI: 20 MM
MAX. SPEED: 265 M/MIN
POSITIONING ACCURACY: 0,10 MM
LENGTH: 8000 MM
WIDTH: 4800 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG (GRUNDMASCHINE)

\N \N \N

STANDARD CONFIGURATION

\N \NMACHINE \N\N
    \N
  • CLOSED MACHINE FRAME
  • \N
  • INTEGRATED CABINET
  • \N
  • AUTOMATIC PALLET CHANGER LENGTHWISE INSTALLATION
  • \N
  • TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES
  • \N
  • ENCLOSED BEAM DELIVERY VIA FIBER OPTIC CABLE
  • \N
  • CHILLER FOR MACHINE COOLING (WATER-AIR)
  • \N
  • INTEGRATED ELETRICAL CABINETS WITH INSIDE LIGHT
  • \N
  • POWER SUPPLY TRUDISK VIA THE MACHINE
  • \N
  • LONGITUDINAL CONVEYOR
  • \N
  • WORKING AREA LIGHTING
  • \N
  • POSITIONING LASER DIODE
  • \N
  • SPRAY DEVICE
  • \N
  • PIERCELINE
  • \N
  • FOCUSLINE
  • \N
  • NITROLINE
  • \N
  • PLASMALINE
  • \N
  • AUTOMATIC NOZZLE CLEANING
  • \N
\N \NTRUMPF LASER \N \N
    \N
  • SOLID STATE LASER TRUDISK 5001 WITH 1 LLK OUTPUT
  • \N
  • FIBER OPTIC CABLE ACCORDING STANDARD LAYOUT (LASER NEXT TO THE MACHINE)
  • \N
  • LASER CHILLER UNIT (WATER-AIR)
  • \N
  • STIMULATION VIA PUMP DIODES
  • \N
  • LASER POWER CONTROL
  • \N
\N \N \NCUTTING HEAD \N \N
    \N
  • UNIVERSAL CUTTING HEAD WITH COMPLETE ADAPTIVE LENSE SYSTEM
  • \N
  • ONE CUTTING HEAD STRATEGY
  • \N
  • PROTECTION GLASS TO AVOID LENSE CONTAMINATION
  • \N
  • PROTECTION GLASS MONITORING
  • \N
  • CONTROLLINE: HEIGHT REGULATION AND SHEET EDGE DETECTION
  • \N
\N \NCONTROL \N\N
    \N
  • SINUMERIK 840D SL
  • \N
  • 19 TOUCH PANEL
  • \N
  • EASY SHOP FLOOR PROGRAMMING
  • \N
  • FAST REPRODUCTION
  • \N
  • TECHNOLOGY DATA IS INTEGRATED
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE
  • \N
  • CONTOURLINE
  • \N
  • MICROWELD
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • ADJUSTLINE
  • \N
  • TELESERVICE VIA INTERNET
  • \N
\N \NDATA TRANSMISSION \N \N
    \N
  • RJ45 NETWORK CONNECTION
  • \N
  • USB INTERFACE
  • \N
\N \NSAFETY \N \N
    \N
  • CE LABEL
  • \N
  • LIGHT BARRIERS
  • \N
  • MULTI-CHAMBER EXTRACTION SYSTEM
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
  • MACHINE ENCLOSURE WITH CERTIFICATED WINDOW (RIGHT DOOR)
  • \N
  • ELECTRICAL CURL UP ROOF
  • \N
\N \N

ADDITIONAL EQUIPMENT

\N \N\N
    \N
  • SMART NOZZLE AUTOMATION (INCL. NOZZLE CHANGER, AUTOMATIC NOZZLE INSPECTION AND SMART SKIP)
  • \N
  • COPPER CUTTING PACKAGE (INCLUDES CUTTING DATA N2, O2)
  • \N
  • BRASS CUTTING PACKAGE (INCLUDES CUTTING DATA N2)
  • \N
  • BRIGHTLINE FIBER
  • \N
  • COOLLINE
  • \N
  • DETECTLINE: PRECISION SHEET POSITION SENSING (INCL. AUTOMATIC FOCUS MEASUREMENT)
  • \N
  • DOOR WINDOW ON LEFT SIDE FOR BETTER INSIGHT
  • \N
  • WIDE TRANSVERSE CONVEYOR BELT WITH TILT CONTAINER (CONTAINER ON THE LEFT SIDE OF THE MACHINE)
  • \N
  • MACHINE STATUS LAMP (INCL. MDR INTERFACE)
  • \N
  • INTEGRATED VIDEO CAMERA (FULL HD) FOR PROCESS MONITORING SINGLE PICTURE TRANSMISSION TO NETWORK
  • \N
  • DROP & CUT
  • \N
  • CO2 EXTINGUISHING DEVICE FOR COMPACT DUST EXTRACTOR
  • \N
\N \N

INSTALLATION

\N \N\N
    \N
  • PLATFORM VERSION MACHINE WITHOUT STEEL STRUCTURE
  • \N
\N \N

AUTOMATION

\N \NLIFTMASTER COMPACT \N \N\N
    \N
  • BASIC CONFIGURATION INCL. SYNCHRONOUS LOADER, PEELING DEVICE, MEASURING DEVICE FOR THICK SHEETS, MOVABLE UNLOADING RAKE(DISTANCE BETWEEN THE PRONGS 67 MM, CHANGEABLE PRONGS) INCL. RAW MATERIAL UNPACKING STATION, LOADING STATION, STACK HEIGHT UP TO 90 MM / 3 T, FINISHED PARTS PALLET AND EXTENDED PALLET PULL-OUT ON THE MACHINE
  • \N
  • THIN SHEET SEPARATION FOR SYNCHRONOUS LOADER (S = 0,8 - 2,0 MM)
  • \N
  • SCRATCH-FREE, ACCURATE UNLOADING (INCL. STAINLESS STEEL RAKES WITH BELT PRONGS, DISTANCE BETWEEN PRONGS 67 MM UP TO S = 15 MM)
  • \N
\N \NPARTMASTER INTEGRATION TRUSTORE INCL. PARTMASTER \N \NTRUSTORE 3030 \N \NBASIC MODULE STORAGE TOWER FOR MAX. 12 SHELVES\NMAX. SHEET FORMAT: 3048 X 1524 MM\NMAX. LOADING HEIGHT PER PALLET: 90 / 170 MM\NMAX. LOADING WEIGHT PER PALLET: 3 T\NSYSTEM HEIGHT:5550 MM\N \N\N
    \N
  • START POST
  • \N
  • STORE SAFETY DEVICE
  • \N
  • COLUMN COVERING
  • \N
  • FORK LIFT CAPABLE FLOOR PALLET FOR RAW MATERIAL
  • \N
\N \N \NRACK SERVER \N\N
    \N
  • CONTROL PANEL
  • \N
  • STORE SAFETY DEVICE
  • \N
  • STORE INTERFACE
  • \N
  • SWITCH CABINET LIGHTING
  • \N
  • TELESERVICE VIA INTERNET
  • \N
  • LIFTING CHAIN, E-CHAIN
  • \N
  • LIFTING SPEED 12 M/MIN
  • \N
  • PULL-OUT SPEED 30 M/MIN
  • \N
  • LIFT ACCELERATION 0,5 M/S²
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-initial registration: 10 / 2015
mileage: 114.938 km
hu / au: 07 / 2019
euro 5
green sticker

third gear is no longer existent, gear needs to be repaired
vehicle is ready to go and all despite shortages

transmission 2.3 liter turbo diesel engine
engine power: 96 kw / 130 hp
6 speed manual transmission

max. total weight: 3500 kg
empty weight: 2,165 kg
nutlast: 1.335 kg

laderaummaÃ?e l x w x h: 3.930 x 1,850 x 2,140 mm
rear portal doors 270° angle

air conditioning
cruise control
rear view camera, tft monitor
electric windows
electrically adjustable mirrors
rain sensor
3 seats
driver's airbag
abs, esp
radio / cd player

73450 neresheim price plus 19% vat from site
mistakes and intermediate sale is reserved  INITIAL REGISTRATION: 10 / 2015 MILEAGE: 114.938 KM HU / AU: 07 / 2019 EURO 5 GREEN STICKER THIRD GEAR IS NO LONGER EXISTENT, GEAR NEEDS TO BE REPAIRED VEHICLE IS READY TO GO AND ALL DESPITE SHORTAGES TRANSMISSION 2.3 LITER TURBO DIESEL ENGINE ENGINE POWER: 96 KW / 130 HP 6 SPEED MANUAL TRANSMISSION MAX. TOTAL WEIGHT: 3500 KG EMPTY WEIGHT: 2,165 KG NUTLAST: 1.335 KG LADERAUMMA�E L X W X H: 3.930 X 1,850 X 2,140 MM REAR PORTAL DOORS 270° ANGLE AIR CONDITIONING CRUISE CONTROL REAR VIEW CAMERA, TFT MONITOR ELECTRIC WINDOWS ELECTRICALLY ADJUSTABLE MIRRORS RAIN SENSOR 3 SEATS DRIVER'S AIRBAG ABS, ESP RADIO / CD PLAYER 73450 NERESHEIM PRICE PLUS 19% VAT FROM SITE MISTAKES AND INTERMEDIATE SALE IS RESERVED
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 26000 x 2500 x 2000 mm<br/>description: <b>high-quality sinar p3 evolution 75 digital camera technology for studio photography. the photo lighting is from bacht incl. adjustable ceiling rail system.</b><br> <br> sinar p3 evolution 75 digital camera with lenses 28/35/60/100 mm<br> foba photo tripod (height adjustable)<br> bacht photo lighting<br> elinchrom digital 2400 transformer<br> WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 26000 X 2500 X 2000 MM
DESCRIPTION: HIGH-QUALITY SINAR P3 EVOLUTION 75 DIGITAL CAMERA TECHNOLOGY FOR STUDIO PHOTOGRAPHY. THE PHOTO LIGHTING IS FROM BACHT INCL. ADJUSTABLE CEILING RAIL SYSTEM.

SINAR P3 EVOLUTION 75 DIGITAL CAMERA WITH LENSES 28/35/60/100 MM
FOBA PHOTO TRIPOD (HEIGHT ADJUSTABLE)
BACHT PHOTO LIGHTING
ELINCHROM DIGITAL 2400 TRANSFORMER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-atlantic zeiser cardline
all-in one system for personalizing plastic and paper cards
tool, for example prepaid telefoncards cards, sim cards, age: 2001
iso standard 85.5 x 54mm
camera verifying each card
printing system
labeling module
 ATLANTIC ZEISER CARDLINE ALL-IN ONE SYSTEM FOR PERSONALIZING PLASTIC AND PAPER CARDS TOOL, FOR EXAMPLE PREPAID TELEFONCARDS CARDS, SIM CARDS, AGE: 2001 ISO STANDARD 85.5 X 54MM CAMERA VERIFYING EACH CARD PRINTING SYSTEM LABELING MODULE
Vendedor: Wira Grafik GmbH
Año de construcción: usado
Ubicación: Land-aussen flaschen waschmachine mit trockner <br/>id5507 AUSSEN FLASCHEN WASCHMACHINE MIT TROCKNER
ID5507
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-metronic universys
all-in one system for personalizing plastic and paper cards
for example prepaid telefoncards, tool cards, sim cards
age: 2002
speed: up to 40,000
alphajet printing system
labeling module
hot stamping module
material: abs, pvc, pet, paper
card format: iso standard 85, 5mm x 54 mm
card thickness: 0, 25mm - 0, 8mm
camera for verifying each card
 METRONIC UNIVERSYS ALL-IN ONE SYSTEM FOR PERSONALIZING PLASTIC AND PAPER CARDS FOR EXAMPLE PREPAID TELEFONCARDS, TOOL CARDS, SIM CARDS AGE: 2002 SPEED: UP TO 40,000 ALPHAJET PRINTING SYSTEM LABELING MODULE HOT STAMPING MODULE MATERIAL: ABS, PVC, PET, PAPER CARD FORMAT: ISO STANDARD 85, 5MM X 54 MM CARD THICKNESS: 0, 25MM - 0, 8MM CAMERA FOR VERIFYING EACH CARD
Vendedor: Wira Grafik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 650 x 400 x 400 mm<br/>description: accessories, lenses and olympus photographic camera included. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 650 X 400 X 400 MM
DESCRIPTION: ACCESSORIES, LENSES AND OLYMPUS PHOTOGRAPHIC CAMERA INCLUDED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-microtec goldeneye 501/502
multisensor scanner for determining the quality of sawn timber in the inline transport
scope: capping
type of wood: spruce, pine
length of the slat: 2000mm - 6000mm
the slat width: 45mm - 190mm
thickness of the plate: 18mm - 80mm
wood surface: rough (circular saw cut, clean surface)
moisture content: 8% - 18%
wood temperature: up to + 40 â° c
maximum feed rate goldeneye: from 80 m / min. up to 150 m / min (depending on the cross section)
board gap in the scanner á?³150mm
ambient temperature: + 5 â° c up to + 35 â° c.
maximum humidity: á?¸80% rel. hum.
system configuration: 3d 4 time and 4-sided visual inspection, x ray
cameras: digital c-mos ethernet high-performance cameras
lighting: led lighting, laser
the following functions are included: recording the error zones detected by the sensors
plausibility control
cut optimization taking into account areas and quality-related error dimensions of 4 different qualities
passing the cutting lists on automatic (previously dimter 350 and 450)
production statistics standard microtec
software windows xp user interface
three-dimensional illustration of the entire board
graphical real-time visualization of approved board error
transfer the measurement data and the data of the board failure to optimize computer
detection of knots, cracks, bark inclusion, resin gall, pith, forest edge, damage to edges, blue, tan, parent - under proportionality width, monitoring under massiveness strength
compact and modaleres qualitã¤tsscanner system for wooden components
aluminium/steel housing
internal optoelectronics, sensors, cameras, laser, etc., are protected by custom-designed case against environmental influences.
the scanner is still in production and is available from approximately april 2019 at the disposal. MICROTEC GOLDENEYE 501/502 MULTISENSOR SCANNER FOR DETERMINING THE QUALITY OF SAWN TIMBER IN THE INLINE TRANSPORT SCOPE: CAPPING TYPE OF WOOD: SPRUCE, PINE LENGTH OF THE SLAT: 2000MM - 6000MM THE SLAT WIDTH: 45MM - 190MM THICKNESS OF THE PLATE: 18MM - 80MM WOOD SURFACE: ROUGH (CIRCULAR SAW CUT, CLEAN SURFACE) MOISTURE CONTENT: 8% - 18% WOOD TEMPERATURE: UP TO + 40 &ACIRC;&DEG; C MAXIMUM FEED RATE GOLDENEYE: FROM 80 M / MIN. UP TO 150 M / MIN (DEPENDING ON THE CROSS SECTION) BOARD GAP IN THE SCANNER &AACUTE;?&SUP3;150MM AMBIENT TEMPERATURE: + 5 &ACIRC;&DEG; C UP TO + 35 &ACIRC;&DEG; C. MAXIMUM HUMIDITY: &AACUTE;?&CEDIL;80% REL. HUM. SYSTEM CONFIGURATION: 3D 4 TIME AND 4-SIDED VISUAL INSPECTION, X RAY CAMERAS: DIGITAL C-MOS ETHERNET HIGH-PERFORMANCE CAMERAS LIGHTING: LED LIGHTING, LASER THE FOLLOWING FUNCTIONS ARE INCLUDED: RECORDING THE ERROR ZONES DETECTED BY THE SENSORS PLAUSIBILITY CONTROL CUT OPTIMIZATION TAKING INTO ACCOUNT AREAS AND QUALITY-RELATED ERROR DIMENSIONS OF 4 DIFFERENT QUALITIES PASSING THE CUTTING LISTS ON AUTOMATIC (PREVIOUSLY DIMTER 350 AND 450) PRODUCTION STATISTICS STANDARD MICROTEC SOFTWARE WINDOWS XP USER INTERFACE THREE-DIMENSIONAL ILLUSTRATION OF THE ENTIRE BOARD GRAPHICAL REAL-TIME VISUALIZATION OF APPROVED BOARD ERROR TRANSFER THE MEASUREMENT DATA AND THE DATA OF THE BOARD FAILURE TO OPTIMIZE COMPUTER DETECTION OF KNOTS, CRACKS, BARK INCLUSION, RESIN GALL, PITH, FOREST EDGE, DAMAGE TO EDGES, BLUE, TAN, PARENT - UNDER PROPORTIONALITY WIDTH, MONITORING UNDER MASSIVENESS STRENGTH COMPACT AND MODALERES QUALIT&ATILDE;&CURREN;TSSCANNER SYSTEM FOR WOODEN COMPONENTS ALUMINIUM/STEEL HOUSING INTERNAL OPTOELECTRONICS, SENSORS, CAMERAS, LASER, ETC., ARE PROTECTED BY CUSTOM-DESIGNED CASE AGAINST ENVIRONMENTAL INFLUENCES. THE SCANNER IS STILL IN PRODUCTION AND IS AVAILABLE FROM APPROXIMATELY APRIL 2019 AT THE DISPOSAL.
Vendedor: ScanSolutions GmbH
Año de construcción: usado
Ubicación: Land-measuring range x-axis: 200 mm<br/>measuring range y-axis: 400 mm<br/>table dimensions: 300 mm<br/>tool diameter: 400 mm<br/>control: pillot 3.0 <br/>tool length - max.: 400 mm<br/>weight of tools max.: 10 kg<br/>with the camera d260 pilot 3.0<br/>high accuracy spindle sk 50<br/>adapter sk 50 / hsk a 50-f63<br/>adapter sk 50 / hsk a 63-f80<br/>contour contour measurement lasso<br/><br/><br/><br/><br/> MEASURING RANGE X-AXIS: 200 MM
MEASURING RANGE Y-AXIS: 400 MM
TABLE DIMENSIONS: 300 MM
TOOL DIAMETER: 400 MM
CONTROL: PILLOT 3.0
TOOL LENGTH - MAX.: 400 MM
WEIGHT OF TOOLS MAX.: 10 KG
WITH THE CAMERA D260 PILOT 3.0
HIGH ACCURACY SPINDLE SK 50
ADAPTER SK 50 / HSK A 50-F63
ADAPTER SK 50 / HSK A 63-F80
CONTOUR CONTOUR MEASUREMENT LASSO




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 8.884 €
Ubicación: Land-108 of m racking nedcon
vintage cameras

data:
-h: 930 cm
-t: approx. 110 cm
-l: approx. 108 yds

-top vintage cameras nedcon
-1000 kg per pallet space
-stand in cream / white
-trusses 290 cm
-trusses in orange

shelf consists of:
-037 x stand 930 cm
-traverse 144 x 290 cm
-results in 324 pallet places.

price:
â?¬8884,00 net
â?¬10571,96 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.
delivery upon request by us conveniently possible. 108 OF M RACKING NEDCON VINTAGE CAMERAS DATA: -H: 930 CM -T: APPROX. 110 CM -L: APPROX. 108 YDS -TOP VINTAGE CAMERAS NEDCON -1000 KG PER PALLET SPACE -STAND IN CREAM / WHITE -TRUSSES 290 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -037 X STAND 930 CM -TRAVERSE 144 X 290 CM -RESULTS IN 324 PALLET PLACES. PRICE: &ACIRC;?&NOT;8884,00 NET &ACIRC;?&NOT;10571,96 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-weight approx.: 900 kg<br/>dimensions (l x w x h) approx.: 100 000 x 25 000 x 24 000 mm<br/>description: <b>imal biomass boiler</b><br> <br> combustion capacity: 22,7mw approx, combustion chamber temperature: 950°c, gas vent pressure 11 bar, heated gases temperature: 350°c<br> combustible moving floor: modele pdn 1490-3-q80-17725, tank dim: 15000 x 8500 x 6000 mm for wood combustible, feed unit capacity: 12 000 kg/h<br> combustion chamber: grid surface aera: 30m² approx including 1 drying aera, 1 combustion aera and 1 postcombustion and unloading aera, working pressure: -1,5 mbar, coating: firestone, firestone tichkness: 350-400 mm, access door dim: 700 x 1100 mm, dimensions: 10200 x 4400 x 7500 mm<br> equipment: security camera for the combustion chamber of the fire place<br> coil heating oil: oil flow 340 m3/h, capacity: 7000 kw, number of parallel circuit: 3, oil circulation pump: allweiler, modele ntt 80-250/01, flow: 170m3/h, heigth: 90 m, working temperature: 280°c, engin: 55 kw, max working temperature: 320°c, max wall temperature: 350°c, thermal oil type: mobiltherm 605, oil decomposition rate: 10 % for 8760 h at 280°c, max volume water: 560 l, exchange surface heat: 80 m2, 2 settling tank, 25 000 l for each<br> generating set: sdmo, modele: t22k-nex22k-nexys, dim: 2160 x 966 x 1582 mm, weight: 560 kg, tank capacity: 100 l, sound level: 71 db, exhaust gases temperature: 600°c or 21 kw, exhaust gases flow: 74 l/seconde, fuel consumption: 6,2 l/h, direct coupling<br> steam generator: year of manufacture: 2011, saturated steam: 8000 kg/h approx, pressure: 1,35n/mm² (13,5 bar), pressure high consumption: 2,17 n/mm² (21,7 bar), min working temperature: environmental, max working temperature: 197°c, water treatment unity WEIGHT APPROX.: 900 KG
DIMENSIONS (L X W X H) APPROX.: 100 000 X 25 000 X 24 000 MM
DESCRIPTION: IMAL BIOMASS BOILER

COMBUSTION CAPACITY: 22,7MW APPROX, COMBUSTION CHAMBER TEMPERATURE: 950°C, GAS VENT PRESSURE 11 BAR, HEATED GASES TEMPERATURE: 350°C
COMBUSTIBLE MOVING FLOOR: MODELE PDN 1490-3-Q80-17725, TANK DIM: 15000 X 8500 X 6000 MM FOR WOOD COMBUSTIBLE, FEED UNIT CAPACITY: 12 000 KG/H
COMBUSTION CHAMBER: GRID SURFACE AERA: 30M² APPROX INCLUDING 1 DRYING AERA, 1 COMBUSTION AERA AND 1 POSTCOMBUSTION AND UNLOADING AERA, WORKING PRESSURE: -1,5 MBAR, COATING: FIRESTONE, FIRESTONE TICHKNESS: 350-400 MM, ACCESS DOOR DIM: 700 X 1100 MM, DIMENSIONS: 10200 X 4400 X 7500 MM
EQUIPMENT: SECURITY CAMERA FOR THE COMBUSTION CHAMBER OF THE FIRE PLACE
COIL HEATING OIL: OIL FLOW 340 M3/H, CAPACITY: 7000 KW, NUMBER OF PARALLEL CIRCUIT: 3, OIL CIRCULATION PUMP: ALLWEILER, MODELE NTT 80-250/01, FLOW: 170M3/H, HEIGTH: 90 M, WORKING TEMPERATURE: 280°C, ENGIN: 55 KW, MAX WORKING TEMPERATURE: 320°C, MAX WALL TEMPERATURE: 350°C, THERMAL OIL TYPE: MOBILTHERM 605, OIL DECOMPOSITION RATE: 10 % FOR 8760 H AT 280°C, MAX VOLUME WATER: 560 L, EXCHANGE SURFACE HEAT: 80 M2, 2 SETTLING TANK, 25 000 L FOR EACH
GENERATING SET: SDMO, MODELE: T22K-NEX22K-NEXYS, DIM: 2160 X 966 X 1582 MM, WEIGHT: 560 KG, TANK CAPACITY: 100 L, SOUND LEVEL: 71 DB, EXHAUST GASES TEMPERATURE: 600°C OR 21 KW, EXHAUST GASES FLOW: 74 L/SECONDE, FUEL CONSUMPTION: 6,2 L/H, DIRECT COUPLING
STEAM GENERATOR: YEAR OF MANUFACTURE: 2011, SATURATED STEAM: 8000 KG/H APPROX, PRESSURE: 1,35N/MM² (13,5 BAR), PRESSURE HIGH CONSUMPTION: 2,17 N/MM² (21,7 BAR), MIN WORKING TEMPERATURE: ENVIRONMENTAL, MAX WORKING TEMPERATURE: 197°C, WATER TREATMENT UNITY
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 800 €
Ubicación: Land-1 x pallet rack jungheinrich used goods

data:
-h: 600 cm
-t: 105 cm
-l: approx. 14.4 yds

-special offer
-jh delta vintage cameras
-stand blue
-traverses 350 cm
-trusses in orange

shelf consists of:
-5 x stand 600 x 105 cm
-traverse 24 x 350 cm
-incl. locking pins
-results in 40 pallets.
-3 levels + ground.

price:
â?¬800 net
â?¬952 gross
you will receive an invoice with expelled vat

accessories such as z.b ground anchor, starting-up protection, etc. can be purchased with us.

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly.

delivery upon request by us conveniently possible. 1 X PALLET RACK JUNGHEINRICH USED GOODS DATA: -H: 600 CM -T: 105 CM -L: APPROX. 14.4 YDS -SPECIAL OFFER -JH DELTA VINTAGE CAMERAS -STAND BLUE -TRAVERSES 350 CM -TRUSSES IN ORANGE SHELF CONSISTS OF: -5 X STAND 600 X 105 CM -TRAVERSE 24 X 350 CM -INCL. LOCKING PINS -RESULTS IN 40 PALLETS. -3 LEVELS + GROUND. PRICE: &ACIRC;?&NOT;800 NET &ACIRC;?&NOT;952 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT ACCESSORIES SUCH AS Z.B GROUND ANCHOR, STARTING-UP PROTECTION, ETC. CAN BE PURCHASED WITH US. OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY. DELIVERY UPON REQUEST BY US CONVENIENTLY POSSIBLE.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-weight approx.: 7000 kg<br/>control: power control pc85 <br/>dimensions (l x w x h) approx.: 0 x 0 x 0 mm<br/>c-axis: ja / yes / flex5 <br/>software: woodwop 5.0 <br/>working length x-axis: 3.050 mm<br/>working width y-axis: 1.700 mm<br/>main spindle: 15 kw<br/>tool changer: 18-fach / 18-fold <br/>vacuum pump: 100 cbm/h<br/>drilling head vertical x-axis: 5 piece<br/>drilling head vertical y-axis: 4 piece<br/>drilling head horizontal x-axis: 2 piece<br/>drilling head horizontal y-axis: 2 piece<br/>travelling way z-axis: 600 mm<br/>path-feed rate max. x-axis: 80 m/min<br/>path-feed rate max. y-axis: 80 m/min<br/>path-feed rate max. z-axis: 30 m/min<br/>description: <b>technically very well kept and high-end equipped homag optimat bof 311/30/pm/ap cnc machining center for the machining of wooden windows and entrance doors with main spindle flex5 interface, ap console table, lap ceiling laser and video camera. the homag cnc-machine has very little operating hours (mde approx. 1,765 h) and is located in a timber academy.</b><br>    <br>    technical data and equipment:<br>    - workpiece length for single placement (milling cutter Ø 25 mm) max. 3,225 mm<br>    - workpiece length for single placement (all units) max. 3,050 mm<br>    <br>    - workpiece width in front (milling cutter Ø 25 mm) max. 1,525 mm<br>    - workpiece width at the back (milling cutter Ø 25 mm) max. 1,850 mm<br>    - workpiece width in front (all units) max. 1,450 mm<br>    - workpiece width at the back (all units) max. 1,700 mm<br>    <br>    - automatic console positioning ap<br>    - whithout scantling clamp and aggregates!<br>    <br>    (further tools and units for the tool changer are not included within delivery. a transport rack from homag is required for transportation of the dismantled machine. this results in costs of eur 3,500,-- (plus tax). after the transport rack has been returned to surplex, this amount minus a 10 % value deduction is refunded.) WEIGHT APPROX.: 7000 KG
CONTROL: POWER CONTROL PC85
DIMENSIONS (L X W X H) APPROX.: 0 X 0 X 0 MM
C-AXIS: JA / YES / FLEX5
SOFTWARE: WOODWOP 5.0
WORKING LENGTH X-AXIS: 3.050 MM
WORKING WIDTH Y-AXIS: 1.700 MM
MAIN SPINDLE: 15 KW
TOOL CHANGER: 18-FACH / 18-FOLD
VACUUM PUMP: 100 CBM/H
DRILLING HEAD VERTICAL X-AXIS: 5 PIECE
DRILLING HEAD VERTICAL Y-AXIS: 4 PIECE
DRILLING HEAD HORIZONTAL X-AXIS: 2 PIECE
DRILLING HEAD HORIZONTAL Y-AXIS: 2 PIECE
TRAVELLING WAY Z-AXIS: 600 MM
PATH-FEED RATE MAX. X-AXIS: 80 M/MIN
PATH-FEED RATE MAX. Y-AXIS: 80 M/MIN
PATH-FEED RATE MAX. Z-AXIS: 30 M/MIN
DESCRIPTION: TECHNICALLY VERY WELL KEPT AND HIGH-END EQUIPPED HOMAG OPTIMAT BOF 311/30/PM/AP CNC MACHINING CENTER FOR THE MACHINING OF WOODEN WINDOWS AND ENTRANCE DOORS WITH MAIN SPINDLE FLEX5 INTERFACE, AP CONSOLE TABLE, LAP CEILING LASER AND VIDEO CAMERA. THE HOMAG CNC-MACHINE HAS VERY LITTLE OPERATING HOURS (MDE APPROX. 1,765 H) AND IS LOCATED IN A TIMBER ACADEMY.

TECHNICAL DATA AND EQUIPMENT:
- WORKPIECE LENGTH FOR SINGLE PLACEMENT (MILLING CUTTER Ø 25 MM) MAX. 3,225 MM
- WORKPIECE LENGTH FOR SINGLE PLACEMENT (ALL UNITS) MAX. 3,050 MM

- WORKPIECE WIDTH IN FRONT (MILLING CUTTER Ø 25 MM) MAX. 1,525 MM
- WORKPIECE WIDTH AT THE BACK (MILLING CUTTER Ø 25 MM) MAX. 1,850 MM
- WORKPIECE WIDTH IN FRONT (ALL UNITS) MAX. 1,450 MM
- WORKPIECE WIDTH AT THE BACK (ALL UNITS) MAX. 1,700 MM

- AUTOMATIC CONSOLE POSITIONING AP
- WHITHOUT SCANTLING CLAMP AND AGGREGATES!

(FURTHER TOOLS AND UNITS FOR THE TOOL CHANGER ARE NOT INCLUDED WITHIN DELIVERY. A TRANSPORT RACK FROM HOMAG IS REQUIRED FOR TRANSPORTATION OF THE DISMANTLED MACHINE. THIS RESULTS IN COSTS OF EUR 3,500,-- (PLUS TAX). AFTER THE TRANSPORT RACK HAS BEEN RETURNED TO SURPLEX, THIS AMOUNT MINUS A 10 % VALUE DEDUCTION IS REFUNDED.)
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more CAME types: