81 ofertas

Año de construcción: usado
Ubicación: Land-general

project no.: 904918
number: 1 pcs.
manufacturer: sw
type: ba 400-2
control: siemens 840 d
year of manufacture: 2007
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 400 mm
travel in y (700) 450 mm
travel in z 400 mm
maximum feed speed in x/y/z 50/50/50 m / min
feed force in the x/y/z 9250 n
direct measuring system
tool holder hsk a-63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35 kw
maximum torque at ed 10-40 / 100% 120 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle/n
spindle distance 400 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
torque arm for multiple spindle drilling heads
chain-type tool magazine 2 ã? 30 stations
max tool diameter 75 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 300 mm
maximum tool weight 10 kg
exciting to chip time 3.8 s
workpiece change table 2 fold
2 stk. swivel unit for clamping bridge
nc-controlled rotary actuators
clamping bridges regulations

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
preparation for central oil / emulsion mist extraction system
scratch band conveyors
internal coolant supply
coolant system with paper band filter

general technical data

total power requirements 68 kva
floor space of throughout the facility lxwxh) approx. 3000 x 4700 x 3000 mm
machine weight 12000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904918 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA 400-2 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2007 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 400 MM TRAVEL IN Y (700) 450 MM TRAVEL IN Z 400 MM MAXIMUM FEED SPEED IN X/Y/Z 50/50/50 M / MIN FEED FORCE IN THE X/Y/Z 9250 N DIRECT MEASURING SYSTEM TOOL HOLDER HSK A-63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35 KW MAXIMUM TORQUE AT ED 10-40 / 100% 120 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE TORQUE ARM FOR MULTIPLE SPINDLE DRILLING HEADS CHAIN-TYPE TOOL MAGAZINE 2 Ã? 30 STATIONS MAX TOOL DIAMETER 75 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 10 KG EXCITING TO CHIP TIME 3.8 S WORKPIECE CHANGE TABLE 2 FOLD 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE NC-CONTROLLED ROTARY ACTUATORS CLAMPING BRIDGES REGULATIONS MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA PREPARATION FOR CENTRAL OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER GENERAL TECHNICAL DATA TOTAL POWER REQUIREMENTS 68 KVA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 3000 X 4700 X 3000 MM MACHINE WEIGHT 12000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-powder filler capsule filling- and closing machine (1x), make mg2 bologna, type g-100, no 4425, new 1991, rotating, material stainless steel, number of dosing heads: 40, capacity ± 100.000 p/hr, with motor ± 7,5 kw, 380 volt, floorspace 2,1x1,4 m, total height 1,9 m, weight 2800 kgpowder fillerspackaging machines > powder fillers POWDER FILLER CAPSULE FILLING- AND CLOSING MACHINE (1X), MAKE MG2 BOLOGNA, TYPE G-100, NO 4425, NEW 1991, ROTATING, MATERIAL STAINLESS STEEL, NUMBER OF DOSING HEADS: 40, CAPACITY ± 100.000 P/HR, WITH MOTOR ± 7,5 KW, 380 VOLT, FLOORSPACE 2,1X1,4 M, TOTAL HEIGHT 1,9 M, WEIGHT 2800 KGPOWDER FILLERSPACKAGING MACHINES > POWDER FILLERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-general

project no.: 904920
number: 1 pcs.
manufacturer: wasino
type: a-18
control: fanuc 18i m
year of construction: 1999
state of preservation: second-hand machine
stories about: 2 layers

description

turning

maximum turning diameter 125 mm
max speed main spindle 3000 1/min
maximum performance main spindle in ed 10-40 / 100% 11,2 kw
main spindle spindle passage 65 mm
axes on the main spindle unit c
hollow clamping cylinder to the main spindle

revolver
number of stations of which powered 18/18
the revolver x/y/z axes
travel in x/y/z 155/150/264 mm

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
chip conveyor
machine is / was operated with emulsion
coolant system
precast acceptance facility

bar loader/bar feeder
max bar diameter 16/32/48/65 mm
maximum rod length 3000 mm

mobile device for setup operation with electronic hand wheel

accessories

1 stk. collet chuck e 185 mm
1 set of tool holder for rotary tools
7 pcs tool holders for driven tools.
1 set of guide tubes

general technical data

machine weight approx. 3680 kg

comment

new hydraulic pump in 2018

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904920 NUMBER: 1 PCS. MANUFACTURER: WASINO TYPE: A-18 CONTROL: FANUC 18I M YEAR OF CONSTRUCTION: 1999 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2 LAYERS DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 125 MM MAX SPEED MAIN SPINDLE 3000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 11,2 KW MAIN SPINDLE SPINDLE PASSAGE 65 MM AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE REVOLVER NUMBER OF STATIONS OF WHICH POWERED 18/18 THE REVOLVER X/Y/Z AXES TRAVEL IN X/Y/Z 155/150/264 MM MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER MAX BAR DIAMETER 16/32/48/65 MM MAXIMUM ROD LENGTH 3000 MM MOBILE DEVICE FOR SETUP OPERATION WITH ELECTRONIC HAND WHEEL ACCESSORIES 1 STK. COLLET CHUCK E 185 MM 1 SET OF TOOL HOLDER FOR ROTARY TOOLS 7 PCS TOOL HOLDERS FOR DRIVEN TOOLS. 1 SET OF GUIDE TUBES GENERAL TECHNICAL DATA MACHINE WEIGHT APPROX. 3680 KG COMMENT NEW HYDRAULIC PUMP IN 2018 WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-capper (1x), single head, make weber, new 1963, for pilverproof caps dia. 32mmcapperspackaging machines > cappers CAPPER (1X), SINGLE HEAD, MAKE WEBER, NEW 1963, FOR PILVERPROOF CAPS DIA. 32MMCAPPERSPACKAGING MACHINES > CAPPERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:

working field 4.000 x 2.000 x 115 mm
control siemens sinumerik 840 d
laser power 5,000 watts
maximum sheet thickness mild steel 25 mm
maximum sheet thickness stainless steel 20 mm
maximum sheet thickness alu 12 mm

standard equipment:

-closed machine frame with integrated laser unit
-trumpf laser tlf 5000
-laser unit: co2 laser, high-frequency unit, logbook function angeregt,
-automatic pallet changer and longitudinal conveyor belt
-drives: gantry drive in combination with direct linear drives
-laser power control
-hi-las high pressure cutting
-plasmasensorik pms
-fast processing with sprintlas
-contourlas for making small holes
-cutting gas pressure setting can be programmed
-laser cutting head with 5 "lens
-laser cutting head with 7.5 "-lens"
-cutting head quick change facility
-capacitive height control (slides iii)
-automatic focus position adjustment of autolas plus
-oil spray safe thick sheet metal working
-automatic switch-off
-lighting of workroom
-control sin 840 d: open control on pc-based, easy to use, online help, diagnostics, maintenance logbook, technology data, tele-service
-shop floor programming lite tops 100
-security: mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilated, monitoring system, multi chamber extraction and compact dust collector, cab
network connection: bnc/rj-45 network connection by installing via tele-service
-electrical equipment for three-phase 400 v / 50 hz
-colour: white structure lacquer ral 9002 / gentian blue ral 5010

advanced features:

-additional laser cutting head with a 3.75-inch lens
-additional laser cutting head with 9-inch lens
-process control system (pcs)

! machine rebuilt - incl. new turbine (lsm)!

(errors and omissions in the technical data, information and prices and subject to prior sale!) 


 TECHNICAL DATA: WORKING FIELD 4.000 X 2.000 X 115 MM CONTROL SIEMENS SINUMERIK 840 D LASER POWER 5,000 WATTS MAXIMUM SHEET THICKNESS MILD STEEL 25 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL 20 MM MAXIMUM SHEET THICKNESS ALU 12 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -TRUMPF LASER TLF 5000 -LASER UNIT: CO2 LASER, HIGH-FREQUENCY UNIT, LOGBOOK FUNCTION ANGEREGT, -AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR BELT -DRIVES: GANTRY DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES -LASER POWER CONTROL -HI-LAS HIGH PRESSURE CUTTING -PLASMASENSORIK PMS -FAST PROCESSING WITH SPRINTLAS -CONTOURLAS FOR MAKING SMALL HOLES -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -LASER CUTTING HEAD WITH 5 "LENS -LASER CUTTING HEAD WITH 7.5 "-LENS" -CUTTING HEAD QUICK CHANGE FACILITY -CAPACITIVE HEIGHT CONTROL (SLIDES III) -AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS -OIL SPRAY SAFE THICK SHEET METAL WORKING -AUTOMATIC SWITCH-OFF -LIGHTING OF WORKROOM -CONTROL SIN 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE -SHOP FLOOR PROGRAMMING LITE TOPS 100 -SECURITY: MEHRSTRAHLIGE PHOTOELECTRIC BEAM GUIDANCE IS FULLY ENCAPSULATED AND VENTILATED, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB NETWORK CONNECTION: BNC/RJ-45 NETWORK CONNECTION BY INSTALLING VIA TELE-SERVICE -ELECTRICAL EQUIPMENT FOR THREE-PHASE 400 V / 50 HZ -COLOUR: WHITE STRUCTURE LACQUER RAL 9002 / GENTIAN BLUE RAL 5010 ADVANCED FEATURES: -ADDITIONAL LASER CUTTING HEAD WITH A 3.75-INCH LENS -ADDITIONAL LASER CUTTING HEAD WITH 9-INCH LENS -PROCESS CONTROL SYSTEM (PCS) ! MACHINE REBUILT - INCL. NEW TURBINE (LSM)! (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-powder filler capsule filling- and closing machine (1x), make mg2 bologna, type g-60, no 1722, rotating, material stainless steel, number of dosing heads: 24, capacity ± 60.000 p/hr, with motor ± 2,5 kw, 380 volt, floorspace 1,8x1,4 m, total height 1,8 m, weight 2500 kgpowder fillerspackaging machines > powder fillers POWDER FILLER CAPSULE FILLING- AND CLOSING MACHINE (1X), MAKE MG2 BOLOGNA, TYPE G-60, NO 1722, ROTATING, MATERIAL STAINLESS STEEL, NUMBER OF DOSING HEADS: 24, CAPACITY ± 60.000 P/HR, WITH MOTOR ± 2,5 KW, 380 VOLT, FLOORSPACE 1,8X1,4 M, TOTAL HEIGHT 1,8 M, WEIGHT 2500 KGPOWDER FILLERSPACKAGING MACHINES > POWDER FILLERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-mazak laser cutting system stx510 mkiii 2.5kw year: 2011
very well preserved, reconditioned mazak laser machines with 2500w
panel sizes: 3000 mm x 1500 mm
minimal footprint by 2, 9 m x 7, 3 m
small part conveyor
lan/usb connection
automatic nozzle change
automatic focus position adjustment
fast in cutting thick materials
plasma sensor for stainless steel cutting
piercing sensor to the piercing
burning sensor for monitoring when cutting mild steel
completely encapsulated engine cover no foundation needed
fe: up to 20mm
va: up to 10mm
almg: up to 8mm
plastic can
incl. software
including warranty
incl. extraction system
incl. commissioning + training

= optional with automatic loading and unloading.
 MAZAK LASER CUTTING SYSTEM STX510 MKIII 2.5KW YEAR: 2011 VERY WELL PRESERVED, RECONDITIONED MAZAK LASER MACHINES WITH 2500W PANEL SIZES: 3000 MM X 1500 MM MINIMAL FOOTPRINT BY 2, 9 M X 7, 3 M SMALL PART CONVEYOR LAN/USB CONNECTION AUTOMATIC NOZZLE CHANGE AUTOMATIC FOCUS POSITION ADJUSTMENT FAST IN CUTTING THICK MATERIALS PLASMA SENSOR FOR STAINLESS STEEL CUTTING PIERCING SENSOR TO THE PIERCING BURNING SENSOR FOR MONITORING WHEN CUTTING MILD STEEL COMPLETELY ENCAPSULATED ENGINE COVER NO FOUNDATION NEEDED FE: UP TO 20MM VA: UP TO 10MM ALMG: UP TO 8MM PLASTIC CAN INCL. SOFTWARE INCLUDING WARRANTY INCL. EXTRACTION SYSTEM INCL. COMMISSIONING + TRAINING = OPTIONAL WITH AUTOMATIC LOADING AND UNLOADING.
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 8000 x 2500 x 2200 mm<br/>description: insulated, with heating, individual dimensions 1st silo 900 x 1500 mm, 2nd and 3rd silo diameter approx. 730 mm, usable height approx. 1200 mm, 4th and 5th silo diameter approx. 650 mm, usable height approx. 850 mm, each silo 1 lower outlet with mechanic slide flap, various pipings diameter approx. 1500 mm, partly with and partly without insulation, 1 metal add-on frame, platform footprint approx. 6000 x 2500 mm, height approx. 3950 mm, 1 dry-air generator motan lx-400, serial number 00010065/000067, dry air volume max. 400 m³/h, heating capacity 9 kw, various attachment parts, device is possibly defective, unchecked, dimensions 1000 x 1250 x 2800 mm, system was partly already pre-dismantled, is still in complete state, it is included a motan control cabinet for drying plant with various control elements, dimensions control cabinet 2000 x 500 x 2000 mm, including mix battery 1180 x 450 x 1000 mm, in total 6 canals, 3 connections per canal, closing caps without piping, control siemens s 5 WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 2500 X 2200 MM
DESCRIPTION: INSULATED, WITH HEATING, INDIVIDUAL DIMENSIONS 1ST SILO 900 X 1500 MM, 2ND AND 3RD SILO DIAMETER APPROX. 730 MM, USABLE HEIGHT APPROX. 1200 MM, 4TH AND 5TH SILO DIAMETER APPROX. 650 MM, USABLE HEIGHT APPROX. 850 MM, EACH SILO 1 LOWER OUTLET WITH MECHANIC SLIDE FLAP, VARIOUS PIPINGS DIAMETER APPROX. 1500 MM, PARTLY WITH AND PARTLY WITHOUT INSULATION, 1 METAL ADD-ON FRAME, PLATFORM FOOTPRINT APPROX. 6000 X 2500 MM, HEIGHT APPROX. 3950 MM, 1 DRY-AIR GENERATOR MOTAN LX-400, SERIAL NUMBER 00010065/000067, DRY AIR VOLUME MAX. 400 M³/H, HEATING CAPACITY 9 KW, VARIOUS ATTACHMENT PARTS, DEVICE IS POSSIBLY DEFECTIVE, UNCHECKED, DIMENSIONS 1000 X 1250 X 2800 MM, SYSTEM WAS PARTLY ALREADY PRE-DISMANTLED, IS STILL IN COMPLETE STATE, IT IS INCLUDED A MOTAN CONTROL CABINET FOR DRYING PLANT WITH VARIOUS CONTROL ELEMENTS, DIMENSIONS CONTROL CABINET 2000 X 500 X 2000 MM, INCLUDING MIX BATTERY 1180 X 450 X 1000 MM, IN TOTAL 6 CANALS, 3 CONNECTIONS PER CANAL, CLOSING CAPS WITHOUT PIPING, CONTROL SIEMENS S 5
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-espresso machine rancilio baby used only a few months in operation, 2-group, with screening carriers only for illy capsules 2 programmable coffee water quantity per group, manual button, 1 inox-steam valve, 1 hot water tap, 4l-tank, without water connection, suitable, w/d/h 550 / 413/367 mm - 230 v / 3.4 kw (1,1 kw)
comments to the state: expressly pointed out is that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction ESPRESSO MACHINE RANCILIO BABY USED ONLY A FEW MONTHS IN OPERATION, 2-GROUP, WITH SCREENING CARRIERS ONLY FOR ILLY CAPSULES 2 PROGRAMMABLE COFFEE WATER QUANTITY PER GROUP, MANUAL BUTTON, 1 INOX-STEAM VALVE, 1 HOT WATER TAP, 4L-TANK, WITHOUT WATER CONNECTION, SUITABLE, W/D/H 550 / 413/367 MM - 230 V / 3.4 KW (1,1 KW) COMMENTS TO THE STATE: EXPRESSLY POINTED OUT IS THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 30 kg<br/>dimensions (l x w x h) approx.: 400 x 400 x 500 mm<br/>description: lot composed of 11 caps for turret connection vdi 040. see photo WEIGHT APPROX.: 30 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 400 X 500 MM
DESCRIPTION: LOT COMPOSED OF 11 CAPS FOR TURRET CONNECTION VDI 040. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-edgebander fields g 320 with extraction af14
2013.
edge thickness: 0.4-2 mm
workpiece thickness: 10-45 mm
quick-set system
automatic edge feeder
feed speed: 8 m / min
engine 2 kw
aggregates glue unit
yoke caps
multifunktionsfraesaggregat
surface scraper
machine on 4 wheels
dimensions l x w x h 2.05 x 0.95 x 1,30 m
weight 290 kg extraction af 14
suction capacity: 2,350 mâ³/h
chip bag contents 200 litres
extraction adapter 140 mm
2,030 mm
engine 2 kw
 EDGEBANDER FIELDS G 320 WITH EXTRACTION AF14 2013. EDGE THICKNESS: 0.4-2 MM WORKPIECE THICKNESS: 10-45 MM QUICK-SET SYSTEM AUTOMATIC EDGE FEEDER FEED SPEED: 8 M / MIN ENGINE 2 KW AGGREGATES GLUE UNIT YOKE CAPS MULTIFUNKTIONSFRAESAGGREGAT SURFACE SCRAPER MACHINE ON 4 WHEELS DIMENSIONS L X W X H 2.05 X 0.95 X 1,30 M WEIGHT 290 KG EXTRACTION AF 14 SUCTION CAPACITY: 2,350 M&ACIRC;&SUP3;/H CHIP BAG CONTENTS 200 LITRES EXTRACTION ADAPTER 140 MM 2,030 MM ENGINE 2 KW
Vendedor: Marevi
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 400 x 400 x 500 mm<br/>description: lot composed of 11 caps for turret connection vdi 040. see photo WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 400 X 500 MM
DESCRIPTION: LOT COMPOSED OF 11 CAPS FOR TURRET CONNECTION VDI 040. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2008
hours of operation machine: 65.250 h (01.10.2018)
hours of operation a laser: 64.733 h (01.10.2018)
hours of operation a beam: 17.390 h (01.10.2018)
laser power: 4000 watts
work area: 3000 x 1500 x 115 mm
control: siemens sinumerik 840 d bzwckjvc
max steel approximately: 20 mm
max stainless steel approx.: 15 mm
max aluminium approx.: 8 mm
space requirement approx.: 11,650 x 9,000 x 3.566 mm
approximate weight machine: 11,500 kg
power consumption: 88 kva

standard equipment
-closed machine frame with integrated laser unit
-automatic pallet changer
-longitudinal conveyor for small parts/waste
-lighting of workroom
-position laser diode
-programmable cutting gas pressure
-spraying device

trumpf laser
-co2 laser truflow 4000
-maintenance-free ac servo motors
-high-frequency excitation
-programmable power cycles
-laser power control
-logbook function laser
-cooling unit

cutting head
-laser cutting head with 5 "and 7.5" lens
-cutting head quick change facility
-automatic sheet metal outer edge detection
-controlline

control
-control siemens sinumerik 840 d
-automatic switch-off
-microweld
-ease of use
-online help
-integrated e-shop
-diagnosis function
-usb interface
-technical data

security
-light barrier
-multi-chamber exhaust system
-compact collector
-beam guiding completely encapsulated and ventilated
-monitoring system

advanced machine equipment
-pierceline (pc)

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2008 HOURS OF OPERATION MACHINE: 65.250 H (01.10.2018) HOURS OF OPERATION A LASER: 64.733 H (01.10.2018) HOURS OF OPERATION A BEAM: 17.390 H (01.10.2018) LASER POWER: 4000 WATTS WORK AREA: 3000 X 1500 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D BZWCKJVC MAX STEEL APPROXIMATELY: 20 MM MAX STAINLESS STEEL APPROX.: 15 MM MAX ALUMINIUM APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 11,650 X 9,000 X 3.566 MM APPROXIMATE WEIGHT MACHINE: 11,500 KG POWER CONSUMPTION: 88 KVA STANDARD EQUIPMENT -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER -LONGITUDINAL CONVEYOR FOR SMALL PARTS/WASTE -LIGHTING OF WORKROOM -POSITION LASER DIODE -PROGRAMMABLE CUTTING GAS PRESSURE -SPRAYING DEVICE TRUMPF LASER -CO2 LASER TRUFLOW 4000 -MAINTENANCE-FREE AC SERVO MOTORS -HIGH-FREQUENCY EXCITATION -PROGRAMMABLE POWER CYCLES -LASER POWER CONTROL -LOGBOOK FUNCTION LASER -COOLING UNIT CUTTING HEAD -LASER CUTTING HEAD WITH 5 "AND 7.5" LENS -CUTTING HEAD QUICK CHANGE FACILITY -AUTOMATIC SHEET METAL OUTER EDGE DETECTION -CONTROLLINE CONTROL -CONTROL SIEMENS SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -MICROWELD -EASE OF USE -ONLINE HELP -INTEGRATED E-SHOP -DIAGNOSIS FUNCTION -USB INTERFACE -TECHNICAL DATA SECURITY -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -BEAM GUIDING COMPLETELY ENCAPSULATED AND VENTILATED -MONITORING SYSTEM ADVANCED MACHINE EQUIPMENT -PIERCELINE (PC) TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-rapid shrinking of capsules and sleeves with high process reliability<br/>temperature and air flow control. <br/>id5451 RAPID SHRINKING OF CAPSULES AND SLEEVES WITH HIGH PROCESS RELIABILITY
TEMPERATURE AND AIR FLOW CONTROL.
ID5451
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-technical data:

work area: 2,500 x 1,250 x 115 mm control: siemens sinumerik 840 d laser power: 3,200 watts maximum sheet thickness structural steel: 20 mm maximum thickness stainless steel: 12 mm maximum thickness aluminium: 8 mm standard:

â?¢ closed machine frame with integrated laser unit
â?¢ trumpf-laser tlf 2000
â?¢ laser unit: co2 laser, high-frequency unit, logbook function angeregt,
â?¢ automatic pallet changer and longitudinal conveyor belt
â?¢ drives: maintenance-free ac servo motors
â?¢ laser power control
â?¢ hi-las high pressure cutting
â?¢ plasmasensorik pms
â?¢ fast processing with sprintlas
â?¢ contourlas for making small holes
â?¢ programmable cutting gas pressure setting
â?¢ laser cutting head with 5 "lens
â?¢ cutting head quick change facility
â?¢ capacitive height control (slides iii)
â?¢ position laser diode
â?¢ automatic focus position adjustment of autolas plus
â?¢ automatic switch-off
â?¢ lighting of workroom
â?¢ control sin 840 d: open control on pc-based, easy to use, online help, diagnostics, maintenance logbook, technology data, tele-service
â?¢ shop floor programming lite tops 100
â?¢ security: mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilated, monitoring system, multi chamber extraction and compact dust collector, cab
â?¢ network connection: bnc/rj-45 network connection by installing via tele-service
â?¢ electrical equipment for three-phase 400 v / 50 hz
â?¢ finish: textured varnish white ral 9002 / gentian blue ral 5010

advanced features:

â?¢ high-power lasers tlf 3200 / 3.2 kw
â?¢ additional laser cutting head with 7.5 "lens
â?¢ automatic pallet changer

! resonator with lsm-turbine (magnetic bearing)!

(errors and omissions in the technical data, information and prices and subject to prior sale!) 



 TECHNICAL DATA: WORK AREA: 2,500 X 1,250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS STRUCTURAL STEEL: 20 MM MAXIMUM THICKNESS STAINLESS STEEL: 12 MM MAXIMUM THICKNESS ALUMINIUM: 8 MM STANDARD: &ACIRC;?&CENT; CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT &ACIRC;?&CENT; TRUMPF-LASER TLF 2000 &ACIRC;?&CENT; LASER UNIT: CO2 LASER, HIGH-FREQUENCY UNIT, LOGBOOK FUNCTION ANGEREGT, &ACIRC;?&CENT; AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR BELT &ACIRC;?&CENT; DRIVES: MAINTENANCE-FREE AC SERVO MOTORS &ACIRC;?&CENT; LASER POWER CONTROL &ACIRC;?&CENT; HI-LAS HIGH PRESSURE CUTTING &ACIRC;?&CENT; PLASMASENSORIK PMS &ACIRC;?&CENT; FAST PROCESSING WITH SPRINTLAS &ACIRC;?&CENT; CONTOURLAS FOR MAKING SMALL HOLES &ACIRC;?&CENT; PROGRAMMABLE CUTTING GAS PRESSURE SETTING &ACIRC;?&CENT; LASER CUTTING HEAD WITH 5 "LENS &ACIRC;?&CENT; CUTTING HEAD QUICK CHANGE FACILITY &ACIRC;?&CENT; CAPACITIVE HEIGHT CONTROL (SLIDES III) &ACIRC;?&CENT; POSITION LASER DIODE &ACIRC;?&CENT; AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS &ACIRC;?&CENT; AUTOMATIC SWITCH-OFF &ACIRC;?&CENT; LIGHTING OF WORKROOM &ACIRC;?&CENT; CONTROL SIN 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE &ACIRC;?&CENT; SHOP FLOOR PROGRAMMING LITE TOPS 100 &ACIRC;?&CENT; SECURITY: MEHRSTRAHLIGE PHOTOELECTRIC BEAM GUIDANCE IS FULLY ENCAPSULATED AND VENTILATED, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB &ACIRC;?&CENT; NETWORK CONNECTION: BNC/RJ-45 NETWORK CONNECTION BY INSTALLING VIA TELE-SERVICE &ACIRC;?&CENT; ELECTRICAL EQUIPMENT FOR THREE-PHASE 400 V / 50 HZ &ACIRC;?&CENT; FINISH: TEXTURED VARNISH WHITE RAL 9002 / GENTIAN BLUE RAL 5010 ADVANCED FEATURES: &ACIRC;?&CENT; HIGH-POWER LASERS TLF 3200 / 3.2 KW &ACIRC;?&CENT; ADDITIONAL LASER CUTTING HEAD WITH 7.5 "LENS &ACIRC;?&CENT; AUTOMATIC PALLET CHANGER ! RESONATOR WITH LSM-TURBINE (MAGNETIC BEARING)! (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>km-1104</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic 6000fmc  -1600</td> </tr> <tr> <td>year:</td> <td>2009</td> </tr> <tr> <td>working area:</td> <td>2585 x 1650 mm</td> </tr> <tr> <td>laser rated output:</td> <td>2700 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840d</td> </tr> <tr> <td>working hour:</td> <td>37526 / 7597 h</td> </tr> <tr> <td>punching force:</td> <td>22to</td> </tr> <tr> <td>max. tool diameter:</td> <td>76,2 mm</td> </tr> <tr> <td>max. sheet thick.:</td> <td>8 mm</td> </tr> <tr> <td>max. material weight:</td> <td>230 kg</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>7900 mm</td> </tr> <tr> <td>width:</td> <td>9100 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>22500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n \n<strong>machine</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>stable c-frame for easy access</li>\n	<li>coordinate guide for high-precision machining</li>\n	<li>linear magazine, 19 tool stations, 3 clamps</li>\n	<li>drives with maintenance free 3-phase servo motors</li>\n	<li>repositioning unit with programmable stripper</li>\n	<li>ball tables</li>\n	<li>2 parts chutes 500 x 500 mm for punching and laser station</li>\n	<li>2 good parts containers</li>\n	<li>automatic shutdown</li>\n</ul>\n \n<strong>trumpf laser</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>truflow 2700 co2-laser</li>\n	<li>radio-frequency excitation</li>\n	<li>chiller unit</li>\n	<li>laser control: tasc 3</li>\n	<li>encapsulated beam delivery</li>\n	<li>programmable cutting gas pressure</li>\n	<li>cutting head with 5.0 and cutting head with 7.5 lens focal length </li>\n	<li>cutting head quick-change device</li>\n	<li>controlline</li>\n	<li>nitroline</li>\n	<li>sprintline</li>\n	<li>contourline</li>\n</ul>\n \n<strong>punching head</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>hydraulic punching head</li>\n	<li>rotatable single tool adapter</li>\n	<li>programmable presser foot</li>\n	<li>tool length compensation</li>\n	<li>spray lubrication for punches</li>\n	<li>vacuum slug removal</li>\n	<li>forming</li>\n</ul>\n \n<strong>control</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>open controller based on sinumerik 840d</li>\n	<li>control panel with tft screen 12.0</li>\n	<li>easy to use</li>\n	<li>online help</li>\n	<li>diagnostic functions</li>\n	<li>maintenance logbook</li>\n	<li>integrated technology data</li>\n	<li>teleservice</li>\n</ul>\n \n<strong>data transmission</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>network connection and floppy drive</li>\n	<li>network connection incl. installation per teleservice</li>\n</ul>\n \n<strong>safety</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>ce-marking</li>\n	<li>multi-beam light barriers</li>\n	<li>monitoring system for gas pressure, temperature and cooling water</li>\n	<li>rapid hydraulic shutdown</li>\n	<li>laser guard against scattered radiation</li>\n	<li>compact dust extractor</li>\n</ul>\n \n<strong>additonal equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>focusline</li>\n	<li>multibend</li>\n	<li>multitool</li>\n	<li>tapping</li>\n	<li>marking / rapid beading</li>\n	<li>deburring / roller technolgoy</li>\n	<li>repositioning cylinders</li>\n	<li>adaptive stroke calibration</li>\n	<li>additional clamp</li>\n	<li>anti-vibration installation</li>\n	<li>chip conveyor with tilt container</li>\n	<li>brush tables with loading and unloading aid</li>\n	<li>sheet collision detection</li>\n</ul>\n \n<strong>automation</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3> <strong>sheetmaster </strong> </li>\n</ul>\nstandard configuration:<strong> </strong>multi-functional sheet handling system for automated processing \n \nof sheet formats up to 3000 x 1500 mm\nloading podest 3000 x 1500 mm\nunloading podest 3000 x 1500 mm\nsuction frame 3000 x 1500 mm\npeeler cup\nvacuum sensor\ncentral lubrication\nsheet thickness sensor for double sheet check\nclamp closing automatically\n\n	<ul>\n	<li>loading and unloading parallel to production</li>\n	<li>unloading monitoring</li>\n</ul>\n \n·<strong>gripmaster </strong>\n<li>standard configuration: automation component for removal of sheet skeletons </li>\nscissor table: 300 mm\nprocess monitoring through sensors in the skeleton grippers\nscrap skeleton pallet 3000 x 1500 mm tiltable\n \n·<strong>sortmaster pallet</strong> \n<li>standard configuration:<strong> </strong>four stranded chain conveyor for sorting parts onto euro pallets:</li>\n<li>parts sorting takes place in combination with the sheetmaster</li>\n<li>4 pallets lengthwise</li>\n \n \n

TECHNICAL DATA

ITEM NUMBER: KM-1104
MANUFACTURER: TRUMPF
TYPE: TRUMATIC 6000FMC -1600
YEAR: 2009
WORKING AREA: 2585 X 1650 MM
LASER RATED OUTPUT: 2700 WATT
CONTROL: SIEMENS SINUMERIK 840D
WORKING HOUR: 37526 / 7597 H
PUNCHING FORCE: 22TO
MAX. TOOL DIAMETER: 76,2 MM
MAX. SHEET THICK.: 8 MM
MAX. MATERIAL WEIGHT: 230 KG
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 7900 MM
WIDTH: 9100 MM
HEIGHT: 2400 MM
WEIGHT: 22500 KG

\N \N \NSTANDARD CONFIGURATION \N \NMACHINE\N \N
    \N
  • STABLE C-FRAME FOR EASY ACCESS
  • \N
  • COORDINATE GUIDE FOR HIGH-PRECISION MACHINING
  • \N
  • LINEAR MAGAZINE, 19 TOOL STATIONS, 3 CLAMPS
  • \N
  • DRIVES WITH MAINTENANCE FREE 3-PHASE SERVO MOTORS
  • \N
  • REPOSITIONING UNIT WITH PROGRAMMABLE STRIPPER
  • \N
  • BALL TABLES
  • \N
  • 2 PARTS CHUTES 500 X 500 MM FOR PUNCHING AND LASER STATION
  • \N
  • 2 GOOD PARTS CONTAINERS
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
\N \NTRUMPF LASER\N \N
    \N
  • TRUFLOW 2700 CO2-LASER
  • \N
  • RADIO-FREQUENCY EXCITATION
  • \N
  • CHILLER UNIT
  • \N
  • LASER CONTROL: TASC 3
  • \N
  • ENCAPSULATED BEAM DELIVERY
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE
  • \N
  • CUTTING HEAD WITH 5.0 AND CUTTING HEAD WITH 7.5 LENS FOCAL LENGTH
  • \N
  • CUTTING HEAD QUICK-CHANGE DEVICE
  • \N
  • CONTROLLINE
  • \N
  • NITROLINE
  • \N
  • SPRINTLINE
  • \N
  • CONTOURLINE
  • \N
\N \NPUNCHING HEAD\N \N
    \N
  • HYDRAULIC PUNCHING HEAD
  • \N
  • ROTATABLE SINGLE TOOL ADAPTER
  • \N
  • PROGRAMMABLE PRESSER FOOT
  • \N
  • TOOL LENGTH COMPENSATION
  • \N
  • SPRAY LUBRICATION FOR PUNCHES
  • \N
  • VACUUM SLUG REMOVAL
  • \N
  • FORMING
  • \N
\N \NCONTROL\N \N
    \N
  • OPEN CONTROLLER BASED ON SINUMERIK 840D
  • \N
  • CONTROL PANEL WITH TFT SCREEN 12.0
  • \N
  • EASY TO USE
  • \N
  • ONLINE HELP
  • \N
  • DIAGNOSTIC FUNCTIONS
  • \N
  • MAINTENANCE LOGBOOK
  • \N
  • INTEGRATED TECHNOLOGY DATA
  • \N
  • TELESERVICE
  • \N
\N \NDATA TRANSMISSION\N \N
    \N
  • NETWORK CONNECTION AND FLOPPY DRIVE
  • \N
  • NETWORK CONNECTION INCL. INSTALLATION PER TELESERVICE
  • \N
\N \NSAFETY\N \N
    \N
  • CE-MARKING
  • \N
  • MULTI-BEAM LIGHT BARRIERS
  • \N
  • MONITORING SYSTEM FOR GAS PRESSURE, TEMPERATURE AND COOLING WATER
  • \N
  • RAPID HYDRAULIC SHUTDOWN
  • \N
  • LASER GUARD AGAINST SCATTERED RADIATION
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
\N \NADDITONAL EQUIPMENT \N \N \N
    \N
  • FOCUSLINE
  • \N
  • MULTIBEND
  • \N
  • MULTITOOL
  • \N
  • TAPPING
  • \N
  • MARKING / RAPID BEADING
  • \N
  • DEBURRING / ROLLER TECHNOLGOY
  • \N
  • REPOSITIONING CYLINDERS
  • \N
  • ADAPTIVE STROKE CALIBRATION
  • \N
  • ADDITIONAL CLAMP
  • \N
  • ANTI-VIBRATION INSTALLATION
  • \N
  • CHIP CONVEYOR WITH TILT CONTAINER
  • \N
  • BRUSH TABLES WITH LOADING AND UNLOADING AID
  • \N
  • SHEET COLLISION DETECTION
  • \N
\N \NAUTOMATION \N \N \N
    \N
  • SHEETMASTER
  • \N
\NSTANDARD CONFIGURATION: MULTI-FUNCTIONAL SHEET HANDLING SYSTEM FOR AUTOMATED PROCESSING \N \NOF SHEET FORMATS UP TO 3000 X 1500 MM\NLOADING PODEST 3000 X 1500 MM\NUNLOADING PODEST 3000 X 1500 MM\NSUCTION FRAME 3000 X 1500 MM\NPEELER CUP\NVACUUM SENSOR\NCENTRAL LUBRICATION\NSHEET THICKNESS SENSOR FOR DOUBLE SHEET CHECK\NCLAMP CLOSING AUTOMATICALLY\N\N
    \N
  • LOADING AND UNLOADING PARALLEL TO PRODUCTION
  • \N
  • UNLOADING MONITORING
  • \N
\N \N·GRIPMASTER \N
  • STANDARD CONFIGURATION: AUTOMATION COMPONENT FOR REMOVAL OF SHEET SKELETONS
  • \NSCISSOR TABLE: 300 MM\NPROCESS MONITORING THROUGH SENSORS IN THE SKELETON GRIPPERS\NSCRAP SKELETON PALLET 3000 X 1500 MM TILTABLE\N \N·SORTMASTER PALLET \N
  • STANDARD CONFIGURATION: FOUR STRANDED CHAIN CONVEYOR FOR SORTING PARTS ONTO EURO PALLETS:
  • \N
  • PARTS SORTING TAKES PLACE IN COMBINATION WITH THE SHEETMASTER
  • \N
  • 4 PALLETS LENGTHWISE
  • \N \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-complete uhlmann blistering, cartoning and end packing line for tablets and capsules, comprising the following units: 

ups 1030 mtk blister machine, multi-stroke continuous motion, max. blister size 80 x 255 mm, max. forming depth 10 mm, output up to 200 strokes/min. giving 600 blisters/min. with brush box feeder, visiotec visiochrom colour camera filling control, perforation station, hapa hapamatic typ h-226-c foil printer (year 2012) and blister transfer unit 

c2205 cartoning machine, max. carton size 100 x 90 x 150 mm (wxhxl), 1-10 blisters per carton, output up to 250 cartons/min.,reverse tuck closure, with leaflet folder from stack (leaflet size min. 100 x 80 mm (wxl), max. 210 x 300 mm (wxl), and wolke ink-jet printer with camera checking. 

garvens s2 checkweigher with reject, suitable for up to 300gm 

e3025 carton collator bundler with stacker, size range for individual cartonsl min. 25 x 12 x 60 mm (axbxh), max. 100 x 100 x 250 mm (axbxh), collation size range min. 50 x 24 x 60 mm (axbxh), max. 300 x 250 x 300/400 mm, (axbxh), output up to 250 cartons/min. and 25 bundlesl/min. 

e4046 case packer, case size min. 160 x 160 x 160 mm (axbxh), max. 600 x 500 x 400 mm (axbxh), output up to 6 cases/min. 

p5020 palletiser for europallets 120 x 80cm, maximum stack height 1800mm 

the whole line was installed new in 2003.  COMPLETE UHLMANN BLISTERING, CARTONING AND END PACKING LINE FOR TABLETS AND CAPSULES, COMPRISING THE FOLLOWING UNITS: UPS 1030 MTK BLISTER MACHINE, MULTI-STROKE CONTINUOUS MOTION, MAX. BLISTER SIZE 80 X 255 MM, MAX. FORMING DEPTH 10 MM, OUTPUT UP TO 200 STROKES/MIN. GIVING 600 BLISTERS/MIN. WITH BRUSH BOX FEEDER, VISIOTEC VISIOCHROM COLOUR CAMERA FILLING CONTROL, PERFORATION STATION, HAPA HAPAMATIC TYP H-226-C FOIL PRINTER (YEAR 2012) AND BLISTER TRANSFER UNIT C2205 CARTONING MACHINE, MAX. CARTON SIZE 100 X 90 X 150 MM (WXHXL), 1-10 BLISTERS PER CARTON, OUTPUT UP TO 250 CARTONS/MIN.,REVERSE TUCK CLOSURE, WITH LEAFLET FOLDER FROM STACK (LEAFLET SIZE MIN. 100 X 80 MM (WXL), MAX. 210 X 300 MM (WXL), AND WOLKE INK-JET PRINTER WITH CAMERA CHECKING. GARVENS S2 CHECKWEIGHER WITH REJECT, SUITABLE FOR UP TO 300GM E3025 CARTON COLLATOR BUNDLER WITH STACKER, SIZE RANGE FOR INDIVIDUAL CARTONSL MIN. 25 X 12 X 60 MM (AXBXH), MAX. 100 X 100 X 250 MM (AXBXH), COLLATION SIZE RANGE MIN. 50 X 24 X 60 MM (AXBXH), MAX. 300 X 250 X 300/400 MM, (AXBXH), OUTPUT UP TO 250 CARTONS/MIN. AND 25 BUNDLESL/MIN. E4046 CASE PACKER, CASE SIZE MIN. 160 X 160 X 160 MM (AXBXH), MAX. 600 X 500 X 400 MM (AXBXH), OUTPUT UP TO 6 CASES/MIN. P5020 PALLETISER FOR EUROPALLETS 120 X 80CM, MAXIMUM STACK HEIGHT 1800MM THE WHOLE LINE WAS INSTALLED NEW IN 2003.
    Vendedor: Hauser Maschinen e.K.
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1708</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3050</td> </tr> <tr> <td>year:</td> <td>2003</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>48970 / 18490  h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>12 mm</td> </tr> <tr> <td>max. speed:</td> <td>200 / 300 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>11100 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>· closed machine frame with integrated laser unit\n· laser unit: co2 laser <strong>tlf 5000</strong>, radio-frequency excited, chiller, logbook function laser\n· automatic pallet changer and longitudinal conveyor for small parts / slag\n· drives: gantry drive in combination with linear direct drives\n· laser power control\n· hi-las high pressure cutting\n· plasma sensor system pss\n· pcs process control system\n· dias capacitive height regulation\n· high-speed processing with sprintlas\n· contourlas for producing small holes\n· programmable cutting gas pressure setting\n· laser cutting head with 5 lens and laser cutting head with 7.5 lens\n· cutting head quick-change device\n· automatic sheet edge detection\n· positioning laser diode\n· programmable power cycles\n· microweld\n· laser power control\n· automatic focus adjustment autolas plus\n· oil spray device for reliable thick plate machining\n· automatic shutdown\n· work area lighting\n· sinumerik 840d control: open pc-based control system, easy to operate, online help, diagnostic functions, maintenance logbook, technology data, teleservice, rj 45 network connection, 3.5 disc drive, tft color screen\n· shopfloor programming tops 100 lite\n· safety: multi-beam light barriers, completely encapsulated beam delivery purged with nitrogen, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin\n \n

    TECHNICAL DATA

    ITEM NUMBER: LM-1708
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 3050
    YEAR: 2003
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 5000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 48970 / 18490 H
    MAX. SHEET THICK./ST: 25 MM
    MAX. SHEET THICK./VA: 20 MM
    MAX. SHEET THICK./AI: 12 MM
    MAX. SPEED: 200 / 300 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 11100 MM
    WIDTH: 4600 MM
    HEIGHT: 2400 MM
    WEIGHT: 12000 KG

    \N \NSTANDARD CONFIGURATION \N \N · CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT\N· LASER UNIT: CO2 LASER TLF 5000, RADIO-FREQUENCY EXCITED, CHILLER, LOGBOOK FUNCTION LASER\N· AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG\N· DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVES\N· LASER POWER CONTROL\N· HI-LAS HIGH PRESSURE CUTTING\N· PLASMA SENSOR SYSTEM PSS\N· PCS PROCESS CONTROL SYSTEM\N· DIAS CAPACITIVE HEIGHT REGULATION\N· HIGH-SPEED PROCESSING WITH SPRINTLAS\N· CONTOURLAS FOR PRODUCING SMALL HOLES\N· PROGRAMMABLE CUTTING GAS PRESSURE SETTING\N· LASER CUTTING HEAD WITH 5 LENS AND LASER CUTTING HEAD WITH 7.5 LENS\N· CUTTING HEAD QUICK-CHANGE DEVICE\N· AUTOMATIC SHEET EDGE DETECTION\N· POSITIONING LASER DIODE\N· PROGRAMMABLE POWER CYCLES\N· MICROWELD\N· LASER POWER CONTROL\N· AUTOMATIC FOCUS ADJUSTMENT AUTOLAS PLUS\N· OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING\N· AUTOMATIC SHUTDOWN\N· WORK AREA LIGHTING\N· SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO OPERATE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, RJ 45 NETWORK CONNECTION, 3.5 DISC DRIVE, TFT COLOR SCREEN\N· SHOPFLOOR PROGRAMMING TOPS 100 LITE\N· SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED BEAM DELIVERY PURGED WITH NITROGEN, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-acsr electric cable  manufacturing line

acsr(= aluminium conductor steel reinforced )

    

1.drawing machine 

make:kropp(germany) 

inlet dia.: 9m/m

finishing dia.: 4m/m

line speed: max, 20m/min

main motor: 22kw

cap':18.8kg/m

   

2 drawing machine 

make:showa(japan)

11 dies

inlet: ? 8.0mm

finishing: ? 1.6~3.2mm

line speed:max.1,500m/min

main motor: 250kw

annealer

302,4kva(aa-1)

twin spooler

winder:111a

d.c motor 22kw

control panels(hitachi:japan)

   

3 drawing machine

make:daehan(korea)

13 dies 

inlet: ? 2.6~3.2mm

finishing: ? 0.8~1.6mm

line speed: max.1,200m/min

main motor: 55kw ×1,150rpm

take up unit

motor 15kw

coiler

drum: ? 760mm

   

   

4 .multi drawing machine 

make:niehoff(germany) 

the number of drawing: 7

line speed: max.1,500m/min

inlet: ? 2.6~8.0mm

finishing: ? 0.4~1.8mm

main motor:

dc 270kw ×1,650rpm

capatan motor: dc 80kw×3,800rpm

annealer

spooler

   

5 drawing machine

make:germany

al 11 dies

(1)cap': inlet: ? 9.5mm

finishing: ? 1.6~5.0mm

(2)drawing speed: 1,524m/min

(3)power: 192kw

2)capstan: wheel dia(? 450mm)

3)dancer:air cylinder actuation

4)take up

(1)double: bobbin auto change type

(2)bobbin: ? 620mm

(3)power: 30kw

5)control pannel(siemens)

   

6 strander 

(? 620 buncher-1)

make:hamana (japan) 

work dia.: ? 0.12~0.8mm

work number of cable: 7-104(104/0.16)

stranding dia.: max.2.4mm

pitch: 4~75mm

max.2,000rpm

motor: d.c11kw

   

   

7 strander (2) 

(? 620 buncher-2)

make:hamana (japan) 

work dia.: ? 0.12~0.8mm

work number of cable: 7-104(104/0.16)

stranding dia.: max.2.4mm

pitch: 4~75mm

max.2,000rpm

motor: d.c11kw

   

8. strander(3)

? 620 buncher-3)

make:hamana (japan) 

work dia.: ? 0.12~0.8mm

work number of cable: 7-104(104/0.16)

stranding dia.: max.2.4mm

pitch: 4~75mm

max.2,000rpm

motor: d.c11kw



   
 ACSR ELECTRIC CABLE MANUFACTURING LINE ACSR(= ALUMINIUM CONDUCTOR STEEL REINFORCED ) 1.DRAWING MACHINE MAKE:KROPP(GERMANY) INLET DIA.: 9M/M FINISHING DIA.: 4M/M LINE SPEED: MAX, 20M/MIN MAIN MOTOR: 22KW CAP':18.8KG/M 2 DRAWING MACHINE MAKE:SHOWA(JAPAN) 11 DIES INLET: ? 8.0MM FINISHING: ? 1.6~3.2MM LINE SPEED:MAX.1,500M/MIN MAIN MOTOR: 250KW ANNEALER 302,4KVA(AA-1) TWIN SPOOLER WINDER:111A D.C MOTOR 22KW CONTROL PANELS(HITACHI:JAPAN) 3 DRAWING MACHINE MAKE:DAEHAN(KOREA) 13 DIES INLET: ? 2.6~3.2MM FINISHING: ? 0.8~1.6MM LINE SPEED: MAX.1,200M/MIN MAIN MOTOR: 55KW ×1,150RPM TAKE UP UNIT MOTOR 15KW COILER DRUM: ? 760MM 4 .MULTI DRAWING MACHINE MAKE:NIEHOFF(GERMANY) THE NUMBER OF DRAWING: 7 LINE SPEED: MAX.1,500M/MIN INLET: ? 2.6~8.0MM FINISHING: ? 0.4~1.8MM MAIN MOTOR: DC 270KW ×1,650RPM CAPATAN MOTOR: DC 80KW×3,800RPM ANNEALER SPOOLER 5 DRAWING MACHINE MAKE:GERMANY AL 11 DIES (1)CAP': INLET: ? 9.5MM FINISHING: ? 1.6~5.0MM (2)DRAWING SPEED: 1,524M/MIN (3)POWER: 192KW 2)CAPSTAN: WHEEL DIA(? 450MM) 3)DANCER:AIR CYLINDER ACTUATION 4)TAKE UP (1)DOUBLE: BOBBIN AUTO CHANGE TYPE (2)BOBBIN: ? 620MM (3)POWER: 30KW 5)CONTROL PANNEL(SIEMENS) 6 STRANDER (? 620 BUNCHER-1) MAKE:HAMANA (JAPAN) WORK DIA.: ? 0.12~0.8MM WORK NUMBER OF CABLE: 7-104(104/0.16) STRANDING DIA.: MAX.2.4MM PITCH: 4~75MM MAX.2,000RPM MOTOR: D.C11KW 7 STRANDER (2) (? 620 BUNCHER-2) MAKE:HAMANA (JAPAN) WORK DIA.: ? 0.12~0.8MM WORK NUMBER OF CABLE: 7-104(104/0.16) STRANDING DIA.: MAX.2.4MM PITCH: 4~75MM MAX.2,000RPM MOTOR: D.C11KW 8. STRANDER(3) ? 620 BUNCHER-3) MAKE:HAMANA (JAPAN) WORK DIA.: ? 0.12~0.8MM WORK NUMBER OF CABLE: 7-104(104/0.16) STRANDING DIA.: MAX.2.4MM PITCH: 4~75MM MAX.2,000RPM MOTOR: D.C11KW
    Vendedor: BMJ KOREA
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1698</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 3040</td> </tr> <tr> <td>year:</td> <td>2007</td> </tr> <tr> <td>working area:</td> <td>4000 x 2000 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>43.372 h / 18.045 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>11600 mm</td> </tr> <tr> <td>width:</td> <td>5200 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>16000 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser truflow 4000 watt, radio-frequency excited, mirror telescope, chiller, logbook function </li>\n	<li>automatic pallet changer</li>\n	<li>longitudinal conveyor for small parts/slag</li>\n	<li>drives with maintenance-free servo motors</li>\n	<li>laser cutting head with 5 lens</li>\n	<li>laser cutting head with 7,5 lens</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>controlline: maintains a constant stand-off between the nozzle and the workpiece during the cutting operation</li>\n	<li>focusline: program-controlled focus adjustment to different material types and thicknesses</li>\n	<li>laser power control</li>\n	<li>positioning laser diode</li>\n	<li>nitroline: high-pressure cutting </li>\n	<li>sprintline: high-speed processing</li>\n	<li>contourline: for producing small holes</li>\n	<li>plasmaline</li>\n	<li>automatic sheet edge detection </li>\n	<li>programmable power cycles</li>\n	<li>microweld</li>\n	<li>spray device for reliable thick plate machining</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use</li>\n</ul>\nonline help, diagnostic functions, maintenance logbook, technology data, teleservice \n\n	<ul>\n	<li>shopfloor programming</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact</li>\n</ul>\n dust extractor, safety cabin \n\n	<ul>\n	<li>network connection rj45, 3.5 disk drive, tft color screen</li>\n</ul>\n \n

    TECHNICAL DATA

    ITEM NUMBER: LM-1698
    MANUFACTURER: TRUMPF
    TYPE: TRULASER 3040
    YEAR: 2007
    WORKING AREA: 4000 X 2000 X 115 MM
    LASER RATED OUTPUT: 4000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 43.372 H / 18.045 H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 15 MM
    MAX. SHEET THICK./AI: 10 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 11600 MM
    WIDTH: 5200 MM
    HEIGHT: 2000 MM
    WEIGHT: 16000 KG

    \N \N \NSTANDARD CONFIGURATION \N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TRUFLOW 4000 WATT, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER, LOGBOOK FUNCTION
    • \N
    • AUTOMATIC PALLET CHANGER
    • \N
    • LONGITUDINAL CONVEYOR FOR SMALL PARTS/SLAG
    • \N
    • DRIVES WITH MAINTENANCE-FREE SERVO MOTORS
    • \N
    • LASER CUTTING HEAD WITH 5 LENS
    • \N
    • LASER CUTTING HEAD WITH 7,5 LENS
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • CONTROLLINE: MAINTAINS A CONSTANT STAND-OFF BETWEEN THE NOZZLE AND THE WORKPIECE DURING THE CUTTING OPERATION
    • \N
    • FOCUSLINE: PROGRAM-CONTROLLED FOCUS ADJUSTMENT TO DIFFERENT MATERIAL TYPES AND THICKNESSES
    • \N
    • LASER POWER CONTROL
    • \N
    • POSITIONING LASER DIODE
    • \N
    • NITROLINE: HIGH-PRESSURE CUTTING
    • \N
    • SPRINTLINE: HIGH-SPEED PROCESSING
    • \N
    • CONTOURLINE: FOR PRODUCING SMALL HOLES
    • \N
    • PLASMALINE
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • MICROWELD
    • \N
    • SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORKING AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE
    • \N
    \NONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE \N\N
      \N
    • SHOPFLOOR PROGRAMMING
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT
    • \N
    \N DUST EXTRACTOR, SAFETY CABIN \N\N
      \N
    • NETWORK CONNECTION RJ45, 3.5 DISK DRIVE, TFT COLOR SCREEN
    • \N
    \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-technical data:

work area: 6,000 x 2,000 x 115 mm control: siemens sinumerik 840 d laser power: 3,200 watts maximum sheet thickness structural steel: 20 mm maximum thickness stainless steel: 12 mm maximum thickness aluminium: 8 mm standard equipment:

-closed machine frame with integrated laser unit
-laser unit: co2 laser truflow 2000 high-frequency reflector telescope, cooling unit, maintenance-free turbo centrifugal blower, logbook function angeregt
-automatic pallet changer
-longitudinal conveyor for small parts/waste
-drives: maintenance-free three-phase servomotors
-cutting head quick change facility
-laser cutting head with 5 "lens and laser cutting head with 7.5" lens
-cutting gas pressure setting can be programmed
-apc capacitive height control and process control
-automatic focus position adjustment of autolas plus
-laser power control
-position laser diode
-hi-las high pressure cutting
-fast processing with sprintlas
-contourlas for making small holes
-pms plasmasensorik
-automatic sheet metal outer edge detection
-programmable power cycles
-microweld
-spraying device for secure thick sheet metal processing
-automatic switch-off
-lighting of workroom
-control sinumerik 840 d: open control on pc-based, easy to use, online help, integrated e-shop, diagnostics, maintenance logbook, technology data, tele-service
-shop floor programming lite tops 100
-security: multi-beam photoelectric beam delivery
fully encapsulated and ventilation, monitoring system, multi chamber extraction and compact dust collector, cab
-3.5 "floppy drive
-tft color display
-electrical equipment: voltage 400 v / 50 hz
-painting: standard ral 9002/5010

advanced features:

-more powerful laser truflow 3200 incl. mini
-pierceline (pcs - process control system)

(errors and omissions in the technical data, information and prices and subject to prior sale!) 


 TECHNICAL DATA: WORK AREA: 6,000 X 2,000 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS STRUCTURAL STEEL: 20 MM MAXIMUM THICKNESS STAINLESS STEEL: 12 MM MAXIMUM THICKNESS ALUMINIUM: 8 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -LASER UNIT: CO2 LASER TRUFLOW 2000 HIGH-FREQUENCY REFLECTOR TELESCOPE, COOLING UNIT, MAINTENANCE-FREE TURBO CENTRIFUGAL BLOWER, LOGBOOK FUNCTION ANGEREGT -AUTOMATIC PALLET CHANGER -LONGITUDINAL CONVEYOR FOR SMALL PARTS/WASTE -DRIVES: MAINTENANCE-FREE THREE-PHASE SERVOMOTORS -CUTTING HEAD QUICK CHANGE FACILITY -LASER CUTTING HEAD WITH 5 "LENS AND LASER CUTTING HEAD WITH 7.5" LENS -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -APC CAPACITIVE HEIGHT CONTROL AND PROCESS CONTROL -AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS -LASER POWER CONTROL -POSITION LASER DIODE -HI-LAS HIGH PRESSURE CUTTING -FAST PROCESSING WITH SPRINTLAS -CONTOURLAS FOR MAKING SMALL HOLES -PMS PLASMASENSORIK -AUTOMATIC SHEET METAL OUTER EDGE DETECTION -PROGRAMMABLE POWER CYCLES -MICROWELD -SPRAYING DEVICE FOR SECURE THICK SHEET METAL PROCESSING -AUTOMATIC SWITCH-OFF -LIGHTING OF WORKROOM -CONTROL SINUMERIK 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, INTEGRATED E-SHOP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE -SHOP FLOOR PROGRAMMING LITE TOPS 100 -SECURITY: MULTI-BEAM PHOTOELECTRIC BEAM DELIVERY FULLY ENCAPSULATED AND VENTILATION, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB -3.5 "FLOPPY DRIVE -TFT COLOR DISPLAY -ELECTRICAL EQUIPMENT: VOLTAGE 400 V / 50 HZ -PAINTING: STANDARD RAL 9002/5010 ADVANCED FEATURES: -MORE POWERFUL LASER TRUFLOW 3200 INCL. MINI -PIERCELINE (PCS - PROCESS CONTROL SYSTEM) (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
    Vendedor: imc solutions GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1613</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 2530</td> </tr> <tr> <td>year:</td> <td>1998</td> </tr> <tr> <td>working area:</td> <td>2500 x 1250 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>65.000 h / 34.500 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>± 0,1 mm</td> </tr> <tr> <td>length:</td> <td>6500 mm</td> </tr> <tr> <td>width:</td> <td>5900 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>7000 kg</td> </tr> </tbody> </table> <br> <h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>closed machine frame with integrated laser unit, pallet changer</li>\n	<li>laser unit: co2 laser tlf 3000, radio-frequency excited, mirror telescope, </li>\n	<li>chiller, logbook function</li>\n	<li>conveyer for slag</li>\n	<li>cutting head quick-change device, laser cutting head with 5 lens and 7,5 lens</li>\n	<li>capacitive height regulation dias</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>high-speed processing with sprintlas</li>\n	<li>contourlas for producing small holes</li>\n	<li>programmable power cycles</li>\n	<li>sinumerik 840d control: open pc-based control system, easy</li>\n	<li>to use, online help, diagnostic functions, maintenance logbook,</li>\n	<li>technology data, teleservice, 3.5 disk drive, bnc- or rj45 connection</li>\n	<li>safety: beam delivery is completely encapsulated and ventilated,</li>\n	<li>monitoring system, multi-chamber extraction system and compact</li>\n	<li>dust extractor, safety cabin</li>\n</ul>\n

    TECHNICAL DATA

    ITEM NUMBER: LM-1613
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 2530
    YEAR: 1998
    WORKING AREA: 2500 X 1250 X 115 MM
    LASER RATED OUTPUT: 3000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 65.000 H / 34.500 H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 12 MM
    MAX. SHEET THICK./AI: 8 MM
    MAX. SPEED: 85 M/MIN
    POSITIONING ACCURACY: ± 0,1 MM
    LENGTH: 6500 MM
    WIDTH: 5900 MM
    HEIGHT: 2000 MM
    WEIGHT: 7000 KG

    STANDARD CONFIGURATION

    \N \N\N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT, PALLET CHANGER
    • \N
    • LASER UNIT: CO2 LASER TLF 3000, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE,
    • \N
    • CHILLER, LOGBOOK FUNCTION
    • \N
    • CONVEYER FOR SLAG
    • \N
    • CUTTING HEAD QUICK-CHANGE DEVICE, LASER CUTTING HEAD WITH 5 LENS AND 7,5 LENS
    • \N
    • CAPACITIVE HEIGHT REGULATION DIAS
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY
    • \N
    • TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK,
    • \N
    • TECHNOLOGY DATA, TELESERVICE, 3.5 DISK DRIVE, BNC- OR RJ45 CONNECTION
    • \N
    • SAFETY: BEAM DELIVERY IS COMPLETELY ENCAPSULATED AND VENTILATED,
    • \N
    • MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT
    • \N
    • DUST EXTRACTOR, SAFETY CABIN
    • \N
    \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-continious-motion automatic dosing/assembling machine suitable for dosing powders into perforating caps and assemble the same perforating cap with the container cap (for instant solution). output: up to 28'000 caps/h.  CONTINIOUS-MOTION AUTOMATIC DOSING/ASSEMBLING MACHINE SUITABLE FOR DOSING POWDERS INTO PERFORATING CAPS AND ASSEMBLE THE SAME PERFORATING CAP WITH THE CONTAINER CAP (FOR INSTANT SOLUTION). OUTPUT: UP TO 28'000 CAPS/H.
    Vendedor: UNIGROUP AG
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1700</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3030</td> </tr> <tr> <td>year:</td> <td>2000</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>43.791h / 18.144h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 4000, beam tube purge with nitrogen and lens monitoring sensor, radiofrequency</li>\n	<li>excited, mirror telescope, chiller and logbook function </li>\n	<li>automatic pallet changer and longitudinal conveyor </li>\n	<li>drives: maintenance-free 3-phase servo motors</li>\n	<li>working area light</li>\n	<li>automatic shut down</li>\n	<li>cutting head with 5 lens and additional cutting head with 7,5 lens</li>\n	<li>quick changing device for cutting head </li>\n	<li>lubrification spray device for a safe thick sheet machining</li>\n	<li>automatic sheet edge detection</li>\n	<li>dias iii</li>\n	<li>cutting gas pressure setting programmable</li>\n	<li>programmable power cycles</li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system pms</li>\n	<li>fast processing with sprintlas </li>\n	<li>contourlas for producing small holes</li>\n	<li>microweld</li>\n	<li>control: open pc-based control system, easy to use, online help, diagnostic functions, </li>\n</ul> <strong> </strong>\n<strong> </strong> maintenance logbook, technology data, tele service, 3.5 disk drive, bnc-/rj45 connection\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>mde interface</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, </li>\n</ul>\n multi-chamber extractionsystem and compact dust extractor, safety cabin\n

    TECHNICAL DATA

    ITEM NUMBER: LM-1700
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 3030
    YEAR: 2000
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 4000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 43.791H / 18.144H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 15 MM
    MAX. SHEET THICK./AI: 10 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 9300 MM
    WIDTH: 4600 MM
    HEIGHT: 2000 MM
    WEIGHT: 11500 KG

    \N \N \NSTANDARD CONFIGURATION \N \N\N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 4000, BEAM TUBE PURGE WITH NITROGEN AND LENS MONITORING SENSOR, RADIOFREQUENCY
    • \N
    • EXCITED, MIRROR TELESCOPE, CHILLER AND LOGBOOK FUNCTION
    • \N
    • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR
    • \N
    • DRIVES: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
    • \N
    • WORKING AREA LIGHT
    • \N
    • AUTOMATIC SHUT DOWN
    • \N
    • CUTTING HEAD WITH 5 LENS AND ADDITIONAL CUTTING HEAD WITH 7,5 LENS
    • \N
    • QUICK CHANGING DEVICE FOR CUTTING HEAD
    • \N
    • LUBRIFICATION SPRAY DEVICE FOR A SAFE THICK SHEET MACHINING
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • DIAS III
    • \N
    • CUTTING GAS PRESSURE SETTING PROGRAMMABLE
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • PLASMA SENSOR SYSTEM PMS
    • \N
    • FAST PROCESSING WITH SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • MICROWELD
    • \N
    • CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS,
    • \N
    \N MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE SERVICE, 3.5 DISK DRIVE, BNC-/RJ45 CONNECTION\N \N
      \N
    • MDE INTERFACE
    • \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM,
    • \N
    \N MULTI-CHAMBER EXTRACTIONSYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Precio: 30.000 GBP
    Ubicación: Land-fully automatic intermittent-motion monoblock filling and capping machine. for closing cylindrical glass or plastic containers such as bottles and vials with two different types of closures. push on caps and screw caps. the ksf 1020 model has a wide range of uses in the pharmaceutical, cosmetic and other related industries. the dosing station is designed to process liquid products using piston pumps and will be available with 2 piston sizes: 25ml and 75ml. equipped to fill and cap both conventional bottles and bottles with pump spray assemblies (such as nasal spray), 2 vibratory cap bowls are included. machine is capable of fill ranges between 0.1ml to 540ml depending on the pumps fitted. designed to be fitted with up to 6 filling nozzles subject to customers requirement, currently set up with 1 filling nozzle. comes with 5 sets of format parts: 15ml, 100ml, 150ml, 200ml and 540ml. currently equipped with a 24 station star wheel, it was last run at an average speed of 40 bottles per minute with a maximum speed of 50 per minute/3,000 fills per hour. the bottles are manually fed into the machine or can be automatically discharged from a bottle unscrambler. manufactured in stainless steel, highly flexible and designed with constructive modularity these machines are very well known for their robustness and reliability. easy size change-over and compact overall design. fully interlocking guarding. manuals in english. machine size: 4000mm x 1500mm x 2200mm high, approx. weight 1500kg. recently taken out of production, in full working condition. FULLY AUTOMATIC INTERMITTENT-MOTION MONOBLOCK FILLING AND CAPPING MACHINE. FOR CLOSING CYLINDRICAL GLASS OR PLASTIC CONTAINERS SUCH AS BOTTLES AND VIALS WITH TWO DIFFERENT TYPES OF CLOSURES. PUSH ON CAPS AND SCREW CAPS. THE KSF 1020 MODEL HAS A WIDE RANGE OF USES IN THE PHARMACEUTICAL, COSMETIC AND OTHER RELATED INDUSTRIES. THE DOSING STATION IS DESIGNED TO PROCESS LIQUID PRODUCTS USING PISTON PUMPS AND WILL BE AVAILABLE WITH 2 PISTON SIZES: 25ML AND 75ML. EQUIPPED TO FILL AND CAP BOTH CONVENTIONAL BOTTLES AND BOTTLES WITH PUMP SPRAY ASSEMBLIES (SUCH AS NASAL SPRAY), 2 VIBRATORY CAP BOWLS ARE INCLUDED. MACHINE IS CAPABLE OF FILL RANGES BETWEEN 0.1ML TO 540ML DEPENDING ON THE PUMPS FITTED. DESIGNED TO BE FITTED WITH UP TO 6 FILLING NOZZLES SUBJECT TO CUSTOMERS REQUIREMENT, CURRENTLY SET UP WITH 1 FILLING NOZZLE. COMES WITH 5 SETS OF FORMAT PARTS: 15ML, 100ML, 150ML, 200ML AND 540ML. CURRENTLY EQUIPPED WITH A 24 STATION STAR WHEEL, IT WAS LAST RUN AT AN AVERAGE SPEED OF 40 BOTTLES PER MINUTE WITH A MAXIMUM SPEED OF 50 PER MINUTE/3,000 FILLS PER HOUR. THE BOTTLES ARE MANUALLY FED INTO THE MACHINE OR CAN BE AUTOMATICALLY DISCHARGED FROM A BOTTLE UNSCRAMBLER. MANUFACTURED IN STAINLESS STEEL, HIGHLY FLEXIBLE AND DESIGNED WITH CONSTRUCTIVE MODULARITY THESE MACHINES ARE VERY WELL KNOWN FOR THEIR ROBUSTNESS AND RELIABILITY. EASY SIZE CHANGE-OVER AND COMPACT OVERALL DESIGN. FULLY INTERLOCKING GUARDING. MANUALS IN ENGLISH. MACHINE SIZE: 4000MM X 1500MM X 2200MM HIGH, APPROX. WEIGHT 1500KG. RECENTLY TAKEN OUT OF PRODUCTION, IN FULL WORKING CONDITION.
    Vendedor: Lex Machinery Ltd
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1702</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l3050</td> </tr> <tr> <td>year:</td> <td>2004</td> </tr> <tr> <td>working area:</td> <td>3000x1500x100 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens 840 d</td> </tr> <tr> <td>working hour:</td> <td>61.560h/24.643h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>12 mm</td> </tr> <tr> <td>max. speed:</td> <td>200 / 300 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>11100 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> <strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser <strong>tlf 5000</strong>, radio-frequency excited,chiller, logbook function</li>\n	<li>positioning laser diode </li>\n	<li>automatic pallet changer </li>\n	<li>drives: gantry drive in combination with linear direct drives</li>\n	<li>laser power control</li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system </li>\n	<li>microweld</li>\n	<li>sprintlas</li>\n	<li>contourlas for producing small holes</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>programmable power cycle</li>\n	<li>laser cutting head with 5 lens </li>\n	<li>laser cutting head with 7.5 lens</li>\n	<li>cutting head quick-change device</li>\n	<li>capacitive height regulation</li>\n	<li>pcs process control system</li>\n	<li>automatic sheet edge detection</li>\n	<li>conveyor for small parts / slag</li>\n	<li>automatic focus adjustment autolas plus</li>\n	<li>oil spray device for reliable thick plate machining</li>\n	<li>automatic shutdown</li>\n	<li>work area lighting</li>\n	<li> <strong>sinumerik 840d</strong> control: open pc-based control system, easy to operate, online help, diagnostic functions, </li>\n</ul>\n maintenance logbook, technology data, teleservice, tft colour sreen\n\n	<ul>\n	<li>shopfloor programming <strong>tops 100 lite, </strong>network connection (bnc/rj45), 3,5 disk drive</li>\n	<li>safety: multi-beam light barriers, completely encapsulated beam delivery, purged with nitrogen, monitoring system, multi-chamber extraction system</li>\n</ul>\n and compact dust extractor, safety cabin\n \n<strong>additional equipment</strong> </h3>\n<strong> </strong> \n\n	<ul>\n	<li>compressed air cutting</li>\n</ul>\n \n \n \n

    TECHNICAL DATA

    ITEM NUMBER: LM-1702
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L3050
    YEAR: 2004
    WORKING AREA: 3000X1500X100 MM
    LASER RATED OUTPUT: 5000 WATT
    CONTROL: SIEMENS 840 D
    WORKING HOUR: 61.560H/24.643H
    MAX. SHEET THICK./ST: 25 MM
    MAX. SHEET THICK./VA: 20 MM
    MAX. SHEET THICK./AI: 12 MM
    MAX. SPEED: 200 / 300 M/MIN
    POSITIONING ACCURACY: 0,1 MM
    LENGTH: 11100 MM
    WIDTH: 4600 MM
    HEIGHT: 2400 MM
    WEIGHT: 12000 KG

    STANDARD CONFIGURATION \N \N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 5000, RADIO-FREQUENCY EXCITED,CHILLER, LOGBOOK FUNCTION
    • \N
    • POSITIONING LASER DIODE
    • \N
    • AUTOMATIC PALLET CHANGER
    • \N
    • DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVES
    • \N
    • LASER POWER CONTROL
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • PLASMA SENSOR SYSTEM
    • \N
    • MICROWELD
    • \N
    • SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • PROGRAMMABLE POWER CYCLE
    • \N
    • LASER CUTTING HEAD WITH 5 LENS
    • \N
    • LASER CUTTING HEAD WITH 7.5 LENS
    • \N
    • CUTTING HEAD QUICK-CHANGE DEVICE
    • \N
    • CAPACITIVE HEIGHT REGULATION
    • \N
    • PCS PROCESS CONTROL SYSTEM
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • CONVEYOR FOR SMALL PARTS / SLAG
    • \N
    • AUTOMATIC FOCUS ADJUSTMENT AUTOLAS PLUS
    • \N
    • OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORK AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO OPERATE, ONLINE HELP, DIAGNOSTIC FUNCTIONS,
    • \N
    \N MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, TFT COLOUR SREEN\N\N
      \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE, NETWORK CONNECTION (BNC/RJ45), 3,5 DISK DRIVE
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED BEAM DELIVERY, PURGED WITH NITROGEN, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM
    • \N
    \N AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N \NADDITIONAL EQUIPMENT \N \N\N
      \N
    • COMPRESSED AIR CUTTING
    • \N
    \N \N \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-glass bottle filling line khs 40 000 bph with bwm
  
complete line made by khs in year 2000, capacity of 40 000 returnable glass bottles per hour, format of bottles 0.33, 0.5 & 0.65 used for beer. the line was stopped in 2014 and is still installed (only depalletizer and empty bottle conveyors we dismantled ) and the line can be dry tested for serious customers.
 
the list of main equipment:

1. depalletizer innopal as 1h, khs, 2004 with pallet magazine

    control system from kuka
    ser. ? k89400142-100
    machine dismantled and packed.

2. conveyor of empty bottles – missing
3. bwm innoclean ee 52/87 s22k, khs, 1999, double end

    control plc siemens s7
    washer cups made of stainless still
    four treatment sections
    ser. ? 1680

4. conveyor system for clean and empty bottles (with siemens s7 plc)
5. ebi filtec ft49 rld, year 1999

    control system from filtec
    inspection are figure, night, internal inclusions & color
    ser. ? 100144

6. ebi filtec omnivision, year 1999

    control system from filtec
    inspection is internal inclusions
    ser. ? 1200/3000

7. trap filtration system khs filtergehause 54x30, year 2005

    control cabinet with  siemens s7 plc
    two trap filters
    buffer tank volume13.8 m3. pressure 3 bar, year 1999 

8. filling block khs innofill em (svf) 120/18, year 1999

    control plc siemens s7
    over pressure filler with volumetric filling control
    three caps – crown, twistoff – first station & ring-pull – second ctation 
    co2 blowing
    ser. ? 47300

9. fbi heuft spectrum tx hbbvxti 60, 2006

    control – heuft
    inspection are cap & level

10. conveyor of full bottles (siemens s7)
11. pasteurizer innopas piisg 60-175, khs 2002

    control – siemens s7
    span of capacity – 80-100%
    four sections, stainless still
    ser. ? 0579

12. accumulator table  with siemens s7 plc
13. bottle dryer / blower aci , with siemens s7 plc
14. labeler khs innoket 2090/120-60 lm kt, year  2005 + with laser coder lasetec year 2007

    control plc siemens s7
    two stations (front, back, neck) for paper labels, cold glue
    three stations (front, back, neck) for film labels, self-adhesive labels
    60 bottle turtles, servos controlled
    ser. ?1164

15. label inspector khs metec promecon 2000, year 2006
16. labeler inspector khs metec promecon 4000, year 2006

    control system from promecon
    full inspection of bottles – labelers, cap, geometry

17. wrap around packer khs kisters 320/70, 2002 with cartons magazine

    control  plc siemens s7
    type ? 1 packing in 6x4 format in carton
    type ? 2 packing in carton crates 4 boxes on 6 bottles
    ser. ? 002393

18. open crate inspector filtec oc 300 , control plc siemens s7
19. carton box conveyors with flow divider, control plc siemens s7
20. box packing machine aries 906, year 2003 with carton magazine

    control plc siemens s7
    packing  bottles in 6bottle carton boxes

21. palletizer khs innopal lord 2bsn1, year1999 with pallet magazine

    control plc siemens s7
    pelletizing two pallet in parallel
    placing cardboard between layers   

22. pallet conveyors with siemens s7 plc
23. pallet wrapper robopac genesis, year 1997

    control plc siemens s7
    lifting table is missing  
    output conveyor
    ser. ? 467090298

24. pallet coder metec 
25. main electrical distribution cabinets GLASS BOTTLE FILLING LINE KHS 40 000 BPH WITH BWM COMPLETE LINE MADE BY KHS IN YEAR 2000, CAPACITY OF 40 000 RETURNABLE GLASS BOTTLES PER HOUR, FORMAT OF BOTTLES 0.33, 0.5 & 0.65 USED FOR BEER. THE LINE WAS STOPPED IN 2014 AND IS STILL INSTALLED (ONLY DEPALLETIZER AND EMPTY BOTTLE CONVEYORS WE DISMANTLED ) AND THE LINE CAN BE DRY TESTED FOR SERIOUS CUSTOMERS. THE LIST OF MAIN EQUIPMENT: 1. DEPALLETIZER INNOPAL AS 1H, KHS, 2004 WITH PALLET MAGAZINE CONTROL SYSTEM FROM KUKA SER. ? K89400142-100 MACHINE DISMANTLED AND PACKED. 2. CONVEYOR OF EMPTY BOTTLES – MISSING 3. BWM INNOCLEAN EE 52/87 S22K, KHS, 1999, DOUBLE END CONTROL PLC SIEMENS S7 WASHER CUPS MADE OF STAINLESS STILL FOUR TREATMENT SECTIONS SER. ? 1680 4. CONVEYOR SYSTEM FOR CLEAN AND EMPTY BOTTLES (WITH SIEMENS S7 PLC) 5. EBI FILTEC FT49 RLD, YEAR 1999 CONTROL SYSTEM FROM FILTEC INSPECTION ARE FIGURE, NIGHT, INTERNAL INCLUSIONS & COLOR SER. ? 100144 6. EBI FILTEC OMNIVISION, YEAR 1999 CONTROL SYSTEM FROM FILTEC INSPECTION IS INTERNAL INCLUSIONS SER. ? 1200/3000 7. TRAP FILTRATION SYSTEM KHS FILTERGEHAUSE 54X30, YEAR 2005 CONTROL CABINET WITH SIEMENS S7 PLC TWO TRAP FILTERS BUFFER TANK VOLUME13.8 M3. PRESSURE 3 BAR, YEAR 1999 8. FILLING BLOCK KHS INNOFILL EM (SVF) 120/18, YEAR 1999 CONTROL PLC SIEMENS S7 OVER PRESSURE FILLER WITH VOLUMETRIC FILLING CONTROL THREE CAPS – CROWN, TWISTOFF – FIRST STATION & RING-PULL – SECOND CTATION CO2 BLOWING SER. ? 47300 9. FBI HEUFT SPECTRUM TX HBBVXTI 60, 2006 CONTROL – HEUFT INSPECTION ARE CAP & LEVEL 10. CONVEYOR OF FULL BOTTLES (SIEMENS S7) 11. PASTEURIZER INNOPAS PIISG 60-175, KHS 2002 CONTROL – SIEMENS S7 SPAN OF CAPACITY – 80-100% FOUR SECTIONS, STAINLESS STILL SER. ? 0579 12. ACCUMULATOR TABLE WITH SIEMENS S7 PLC 13. BOTTLE DRYER / BLOWER ACI , WITH SIEMENS S7 PLC 14. LABELER KHS INNOKET 2090/120-60 LM KT, YEAR 2005 + WITH LASER CODER LASETEC YEAR 2007 CONTROL PLC SIEMENS S7 TWO STATIONS (FRONT, BACK, NECK) FOR PAPER LABELS, COLD GLUE THREE STATIONS (FRONT, BACK, NECK) FOR FILM LABELS, SELF-ADHESIVE LABELS 60 BOTTLE TURTLES, SERVOS CONTROLLED SER. ?1164 15. LABEL INSPECTOR KHS METEC PROMECON 2000, YEAR 2006 16. LABELER INSPECTOR KHS METEC PROMECON 4000, YEAR 2006 CONTROL SYSTEM FROM PROMECON FULL INSPECTION OF BOTTLES – LABELERS, CAP, GEOMETRY 17. WRAP AROUND PACKER KHS KISTERS 320/70, 2002 WITH CARTONS MAGAZINE CONTROL PLC SIEMENS S7 TYPE ? 1 PACKING IN 6X4 FORMAT IN CARTON TYPE ? 2 PACKING IN CARTON CRATES 4 BOXES ON 6 BOTTLES SER. ? 002393 18. OPEN CRATE INSPECTOR FILTEC OC 300 , CONTROL PLC SIEMENS S7 19. CARTON BOX CONVEYORS WITH FLOW DIVIDER, CONTROL PLC SIEMENS S7 20. BOX PACKING MACHINE ARIES 906, YEAR 2003 WITH CARTON MAGAZINE CONTROL PLC SIEMENS S7 PACKING BOTTLES IN 6BOTTLE CARTON BOXES 21. PALLETIZER KHS INNOPAL LORD 2BSN1, YEAR1999 WITH PALLET MAGAZINE CONTROL PLC SIEMENS S7 PELLETIZING TWO PALLET IN PARALLEL PLACING CARDBOARD BETWEEN LAYERS 22. PALLET CONVEYORS WITH SIEMENS S7 PLC 23. PALLET WRAPPER ROBOPAC GENESIS, YEAR 1997 CONTROL PLC SIEMENS S7 LIFTING TABLE IS MISSING OUTPUT CONVEYOR SER. ? 467090298 24. PALLET CODER METEC 25. MAIN ELECTRICAL DISTRIBUTION CABINETS
    Vendedor: JADE Trading OY
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1680</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3020</td> </tr> <tr> <td>year:</td> <td>2003</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>46.697 h / 23.830 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9800</td> </tr> <tr> <td>width:</td> <td>5300</td> </tr> <tr> <td>height:</td> <td>2000</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> <strong>standard configuration</strong> </h3>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>closed machine frame with integrated laser unit co2 laser tlf 3200<strong>, </strong>beam tube purge with compressed air and lens monitoring sensor, <strong> </strong>radio-frequency excited, mirror telescope</li>\n	<li> <strong> </strong>manual pallet changer and tray for small parts / slag</li>\n	<li> <strong> </strong>drives: maintenance-free 3-phase servo motors</li>\n	<li> <strong> </strong>cutting head quick change device with laser cutting head 7.5 lens</li>\n	<li> <strong> </strong>automatic sheet edge detection</li>\n	<li> <strong> </strong>programmable cutting gas pressure setting</li>\n	<li> <strong> </strong>hi-las high pressure cutting</li>\n	<li>apc advanced process control</li>\n	<li> <strong> </strong>positioning laser diode</li>\n	<li> <strong> </strong>microweld</li>\n	<li> <strong> </strong>programmable power cycles</li>\n	<li> <strong> </strong>high-speed processing with sprintlas</li>\n	<li> <strong> </strong>automatic focus setting autolas plus</li>\n	<li> <strong> </strong>contourlas for producing small holes</li>\n	<li> <strong> </strong>pull-out pallet with external support</li>\n	<li> <strong> </strong>laser logbook function</li>\n	<li> <strong> </strong>automatic shutdown</li>\n	<li> <strong> </strong>working area lighting</li>\n	<li> <strong> </strong>sinumerik 840d control: open pc-basesd control system, easy to use, online help, diagnostic functions, maintenance logbook, technological data, teleservice, 3.5 floppy disk drive, bnc-/rj45 connection</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li> <strong> </strong>safety: completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</li>\n</ul> </h3>\n</h3> \n \n

    TECHNICAL DATA

    ITEM NUMBER: LM-1680
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 3020
    YEAR: 2003
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 3200 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 46.697 H / 23.830 H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 12 MM
    MAX. SHEET THICK./AI: 8 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 9800
    WIDTH: 5300
    HEIGHT: 2000
    WEIGHT: 11500 KG

    STANDARD CONFIGURATION \N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT CO2 LASER TLF 3200, BEAM TUBE PURGE WITH COMPRESSED AIR AND LENS MONITORING SENSOR, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE
    • \N
    • MANUAL PALLET CHANGER AND TRAY FOR SMALL PARTS / SLAG
    • \N
    • DRIVES: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
    • \N
    • CUTTING HEAD QUICK CHANGE DEVICE WITH LASER CUTTING HEAD 7.5 LENS
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • APC ADVANCED PROCESS CONTROL
    • \N
    • POSITIONING LASER DIODE
    • \N
    • MICROWELD
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • AUTOMATIC FOCUS SETTING AUTOLAS PLUS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • PULL-OUT PALLET WITH EXTERNAL SUPPORT
    • \N
    • LASER LOGBOOK FUNCTION
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORKING AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASESD CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGICAL DATA, TELESERVICE, 3.5 FLOPPY DISK DRIVE, BNC-/RJ45 CONNECTION
    • \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE
    • \N
    • SAFETY: COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN
    • \N
    \N \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-general

project no.: 904899
number: 1 pcs.
manufacturer: sw
type: ba w06-22
control: siemens 840 d
year of construction: 2006
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 72 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
4 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant gun
coolant system with paper band filter
high pressure pump 70 bar
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904899 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2006 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 &ATILDE;? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 72 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 4 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
    Vendedor: Wolfgang Finken GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1676</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3030</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>53.851h / 0h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration:</strong> </h3>\n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 4000, new in 2018 including 12 months warranty by the manufacturer, radio-frequency excited, reflector telescope, chiller</li>\n	<li>automatic pallet changer and longitudinal conveyor </li>\n	<li>drives: maintenance-free 3-phase servo motors</li>\n	<li>working area light</li>\n	<li>automatic shut down</li>\n	<li>cutting head with 5 lens and additional cutting head with 7,5 lens</li>\n	<li>quick changing device for cutting head </li>\n	<li>lubrification spray device for a safe thick sheet machining</li>\n	<li>logbook function</li>\n	<li>automatic sheet edge detection</li>\n	<li>dias iii</li>\n	<li>cutting gas pressure setting programmable</li>\n	<li>programmable power cycles</li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system pms</li>\n	<li>fast processing with sprintlas </li>\n	<li>contourlas for producing small holes</li>\n	<li>microweld</li>\n	<li>control: open pc-based control system, easy to use, online help, diagnostic functions, </li>\n</ul> <strong> </strong>\n<strong> </strong> maintenance logbook, technology data, tele service, 3.5 disk drive, bnc-/rj45 connection\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>mde interface</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, </li>\n</ul>\n multi-chamber extractionsystem and compact dust extractor, safety cabin\n \n<strong>addidional equipment</strong> </h3>\n\n	<ul>\n	<li>transverse conveyor with container</li>\n</ul> </h3>\n</h3> \n \n<strong> </strong> </h3>

    TECHNICAL DATA

    ITEM NUMBER: LM-1676
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 3030
    YEAR: 2001
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 4000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 53.851H / 0H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 15 MM
    MAX. SHEET THICK./AI: 10 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 9300 MM
    WIDTH: 4600 MM
    HEIGHT: 2000 MM
    WEIGHT: 11500 KG

    \N \N \NSTANDARD CONFIGURATION: \N\N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 4000, NEW IN 2018 INCLUDING 12 MONTHS WARRANTY BY THE MANUFACTURER, RADIO-FREQUENCY EXCITED, REFLECTOR TELESCOPE, CHILLER
    • \N
    • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR
    • \N
    • DRIVES: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
    • \N
    • WORKING AREA LIGHT
    • \N
    • AUTOMATIC SHUT DOWN
    • \N
    • CUTTING HEAD WITH 5 LENS AND ADDITIONAL CUTTING HEAD WITH 7,5 LENS
    • \N
    • QUICK CHANGING DEVICE FOR CUTTING HEAD
    • \N
    • LUBRIFICATION SPRAY DEVICE FOR A SAFE THICK SHEET MACHINING
    • \N
    • LOGBOOK FUNCTION
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • DIAS III
    • \N
    • CUTTING GAS PRESSURE SETTING PROGRAMMABLE
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • PLASMA SENSOR SYSTEM PMS
    • \N
    • FAST PROCESSING WITH SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • MICROWELD
    • \N
    • CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS,
    • \N
    \N MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE SERVICE, 3.5 DISK DRIVE, BNC-/RJ45 CONNECTION\N \N
      \N
    • MDE INTERFACE
    • \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM,
    • \N
    \N MULTI-CHAMBER EXTRACTIONSYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N \NADDIDIONAL EQUIPMENT \N\N
      \N
    • TRANSVERSE CONVEYOR WITH CONTAINER
    • \N
    \N \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-general

project no.: 904898
number: 1 pcs.
manufacturer: sw
type: ba w04-22
control: siemens 840 d
year of construction: 2006
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 400 mm
travel in y (775) 500 mm
travel in z 425 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 14/14/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 400 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
torque arm for multiple spindle drilling heads
chain-type tool magazine 2 ã? 60 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 300 mm
maximum tool weight 10 kg
exciting to chip time 2.75 s
rotary pallet changer 2 fold
maximum workpiece weight per pallet 450 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridge size 1030 mm
diameter of workpiece range 550 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
4 pcs. additional clamping circuit
pneumatic work piece control

more facilities

ir workpiece measuring probes
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant gun
coolant system with paper band filter
high pressure pump 70 bar
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air connection 6 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5100 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4350 x 7000 x 3100 mm
machine weight 14500 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904898 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA W04-22 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2006 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 400 MM TRAVEL IN Y (775) 500 MM TRAVEL IN Z 425 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 14/14/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 &ATILDE;? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 400 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE TORQUE ARM FOR MULTIPLE SPINDLE DRILLING HEADS CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 60 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 10 KG EXCITING TO CHIP TIME 2.75 S ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET 450 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGE SIZE 1030 MM DIAMETER OF WORKPIECE RANGE 550 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 4 PCS. ADDITIONAL CLAMPING CIRCUIT PNEUMATIC WORK PIECE CONTROL MORE FACILITIES IR WORKPIECE MEASURING PROBES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR CONNECTION 6 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5100 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4350 X 7000 X 3100 MM MACHINE WEIGHT 14500 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
    Vendedor: Wolfgang Finken GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1665</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 6050</td> </tr> <tr> <td>year:</td> <td>2005</td> </tr> <tr> <td>working area:</td> <td>6000 x 2000 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>40.126 h / 26.511 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>12 mm</td> </tr> <tr> <td>max. speed:</td> <td>200 / 300 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>16950 mm</td> </tr> <tr> <td>width:</td> <td>5550 mm</td> </tr> <tr> <td>height:</td> <td>2550 mm</td> </tr> <tr> <td>weight:</td> <td>16000 kg</td> </tr> </tbody> </table> <br> <strong>standard configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 5000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function</li>\n	<li>automatic pallet changer and longitudinal conveyor for small parts / slag</li>\n	<li>drives: gantry drive in combination with linear direct drives </li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system pss</li>\n	<li>automatic sheet edge detection</li>\n	<li>pcs process control system</li>\n	<li>programmable power cycles</li>\n	<li>microweld</li>\n	<li>automatic nozzle cleaning</li>\n	<li>high-speed processing with sprintlas</li>\n	<li>contourlas for producing small holes</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>laser cutting head with 5 lens and laser cutting head with 7.5 lens</li>\n	<li>positioning laser diode </li>\n	<li>cutting head quick-change device</li>\n	<li>automatic focus setting autolas plus</li>\n	<li>laser power control</li>\n	<li>oil spray device for reliable thick plate machining</li>\n	<li>automatic shutdown</li>\n	<li>work area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use, online help, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5 disk drive, rj45 connection, tft color screen</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li>safety: multi-beam light barriers, completely encapsulated beam delivery purged with nitrogen, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</li>\n</ul>\n<strong>additional configuration </strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>laser cutting head with 3,75 lens </li>\n	<li>laser cutting head with 9 lens</li>\n</ul>\n \n<strong> </strong> </h3>

    TECHNICAL DATA

    ITEM NUMBER: LM-1665
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 6050
    YEAR: 2005
    WORKING AREA: 6000 X 2000 X 115 MM
    LASER RATED OUTPUT: 5000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 40.126 H / 26.511 H
    MAX. SHEET THICK./ST: 25 MM
    MAX. SHEET THICK./VA: 25 MM
    MAX. SHEET THICK./AI: 12 MM
    MAX. SPEED: 200 / 300 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 16950 MM
    WIDTH: 5550 MM
    HEIGHT: 2550 MM
    WEIGHT: 16000 KG

    STANDARD CONFIGURATION \N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 5000, RADIO-FREQUENCY EXCITED, MAINTENANCE-FREE TURBO RADIAL BLOWERS, CHILLER, LOGBOOK FUNCTION
    • \N
    • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG
    • \N
    • DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVES
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • PLASMA SENSOR SYSTEM PSS
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • PCS PROCESS CONTROL SYSTEM
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • MICROWELD
    • \N
    • AUTOMATIC NOZZLE CLEANING
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • LASER CUTTING HEAD WITH 5 LENS AND LASER CUTTING HEAD WITH 7.5 LENS
    • \N
    • POSITIONING LASER DIODE
    • \N
    • CUTTING HEAD QUICK-CHANGE DEVICE
    • \N
    • AUTOMATIC FOCUS SETTING AUTOLAS PLUS
    • \N
    • LASER POWER CONTROL
    • \N
    • OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORK AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, 3.5 DISK DRIVE, RJ45 CONNECTION, TFT COLOR SCREEN
    • \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED BEAM DELIVERY PURGED WITH NITROGEN, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN
    • \N
    \NADDITIONAL CONFIGURATION \N \N
      \N
    • LASER CUTTING HEAD WITH 3,75 LENS
    • \N
    • LASER CUTTING HEAD WITH 9 LENS
    • \N
    \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-general

project no.: 904687
number: 1 pcs.
manufacturer: sw
type: ba w04-22
control: siemens 840 d
year of manufacture: 2007
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 400 mm
travel in y (775) 500 mm
travel in z 425 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 14/14/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle/n
spindle distance 400 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 32 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 300 mm
maximum tool weight 10 kg
exciting to chip time 2.75 s
rotary pallet changer 2 fold
maximum workpiece weight per pallet 450 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
8 pcs. (2 x 4 pcs.) nc-controlled rotary table
bridge size 1030 mm
diameter of workpiece range 550 mm
2 set clamping bridge conditions
hydraulic clamping
2 additional / -r clamping circuit (s)

more facilities

preparation for ir workpiece measuring probe renishaw rmp-60
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
preparation for central oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air connection 6 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine lxwxh) approx. 3680 x 5100 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4350 x 7000 x 3100 mm
machine weight 14500 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904687 NUMBER: 1 PCS. MANUFACTURER: SW TYPE: BA W04-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2007 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 400 MM TRAVEL IN Y (775) 500 MM TRAVEL IN Z 425 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 14/14/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 &ATILDE;? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 &ATILDE;? 32 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 10 KG EXCITING TO CHIP TIME 2.75 S ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET 450 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 8 PCS. (2 X 4 PCS.) NC-CONTROLLED ROTARY TABLE BRIDGE SIZE 1030 MM DIAMETER OF WORKPIECE RANGE 550 MM 2 SET CLAMPING BRIDGE CONDITIONS HYDRAULIC CLAMPING 2 ADDITIONAL / -R CLAMPING CIRCUIT (S) MORE FACILITIES PREPARATION FOR IR WORKPIECE MEASURING PROBE RENISHAW RMP-60 TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA PREPARATION FOR CENTRAL OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR CONNECTION 6 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE LXWXH) APPROX. 3680 X 5100 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4350 X 7000 X 3100 MM MACHINE WEIGHT 14500 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
    Vendedor: Wolfgang Finken GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1662</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser tube 5000</td> </tr> <tr> <td>year:</td> <td>2007</td> </tr> <tr> <td>working area:</td> <td>6500 x 1500 mm</td> </tr> <tr> <td>laser rated output:</td> <td>2700 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>58.040h / 8.998h</td> </tr> <tr> <td>max. wall thickness:</td> <td>6,4 mm</td> </tr> <tr> <td>max. tube length:</td> <td>6500 mm</td> </tr> <tr> <td>min. tube length:</td> <td>3000 mm (charg. aut.)</td> </tr> <tr> <td>max. tube diameter:</td> <td>150 mm</td> </tr> <tr> <td>min. tube diameter:</td> <td>15 mm</td> </tr> <tr> <td>max. length finished part:</td> <td>2000 mm</td> </tr> <tr> <td>max. tube weight:</td> <td>20 kg/m</td> </tr> <tr> <td>max. tube bundle weight:</td> <td>4000 kg</td> </tr> <tr> <td>max. speed:</td> <td>100/5/40/40 mm/min</td> </tr> <tr> <td>smallest programmable increment:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>18000 mm</td> </tr> <tr> <td>width:</td> <td>9000 mm</td> </tr> <tr> <td>height:</td> <td>2800 mm</td> </tr> <tr> <td>weight:</td> <td>17700 kg</td> </tr> </tbody> </table> <br> \n \n \n \n \n \n \n \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>solid machine frame with integrated laser unit</li>\n	<li>co2 laser tlf 2700, radio-frequency excitation, chiller</li>\n	<li>motors: maintenance-free 3-phase servo motors</li>\n	<li>nitroline high pressure cutting</li>\n	<li>high-speed processing with sprintline</li>\n	<li>programmable cutting gas pressure </li>\n	<li>laser cutting head with 5 lens, dias iii</li>\n	<li>cutting head - quick change device</li>\n	<li>laser power control</li>\n	<li>laser logbook function</li>\n	<li>automatic shutdown</li>\n	<li>work area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use, </li>\n</ul>\nonline help, diagnostic functions, maintenance logbook, technology data, \nteleservice, 3.5 floppy drive, rj45/bnc network connection\n\n	<ul>\n	<li>safety: multi-beam light barriers, completely encapsulated and</li>\n</ul>\npurged beam delivery, monitoring system, multi-chamber exhaust\nsystem and compact dust extractor, safety cabin\n\n	<ul>\n	<li>part removal station prs 3001 with brush table</li>\n	<li>clamp set d 20-85 mm and d 85-150 mm</li>\n	<li>v-shaped form cups and guide rollers for round tubes</li>\n	<li>u-shaped form cups and guide rollers with outer circle diameter 120 mm</li>\n</ul>\n \n \n<h3> <strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li>focusline</li>\n	<li>seamline tube</li>\n</ul>\n \n<strong>automation</strong>\n<strong> </strong> </h3> \n\n	<ul>\n	<li>loadmaster tube with bundle magazine ld 6000 (plastic rollers)</li>\n</ul>\n \n \n

    TECHNICAL DATA

    ITEM NUMBER: LM-1662
    MANUFACTURER: TRUMPF
    TYPE: TRULASER TUBE 5000
    YEAR: 2007
    WORKING AREA: 6500 X 1500 MM
    LASER RATED OUTPUT: 2700 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 58.040H / 8.998H
    MAX. WALL THICKNESS: 6,4 MM
    MAX. TUBE LENGTH: 6500 MM
    MIN. TUBE LENGTH: 3000 MM (CHARG. AUT.)
    MAX. TUBE DIAMETER: 150 MM
    MIN. TUBE DIAMETER: 15 MM
    MAX. LENGTH FINISHED PART: 2000 MM
    MAX. TUBE WEIGHT: 20 KG/M
    MAX. TUBE BUNDLE WEIGHT: 4000 KG
    MAX. SPEED: 100/5/40/40 MM/MIN
    SMALLEST PROGRAMMABLE INCREMENT: +/- 0,1 MM
    LENGTH: 18000 MM
    WIDTH: 9000 MM
    HEIGHT: 2800 MM
    WEIGHT: 17700 KG

    \N \N \N \N \N \N \N \N \N \N

    STANDARD CONFIGURATION

    \N \N\N
      \N
    • SOLID MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • CO2 LASER TLF 2700, RADIO-FREQUENCY EXCITATION, CHILLER
    • \N
    • MOTORS: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
    • \N
    • NITROLINE HIGH PRESSURE CUTTING
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLINE
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE
    • \N
    • LASER CUTTING HEAD WITH 5 LENS, DIAS III
    • \N
    • CUTTING HEAD - QUICK CHANGE DEVICE
    • \N
    • LASER POWER CONTROL
    • \N
    • LASER LOGBOOK FUNCTION
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORK AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE,
    • \N
    \NONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, \NTELESERVICE, 3.5 FLOPPY DRIVE, RJ45/BNC NETWORK CONNECTION\N\N
      \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND
    • \N
    \NPURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXHAUST\NSYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N\N
      \N
    • PART REMOVAL STATION PRS 3001 WITH BRUSH TABLE
    • \N
    • CLAMP SET D 20-85 MM AND D 85-150 MM
    • \N
    • V-SHAPED FORM CUPS AND GUIDE ROLLERS FOR ROUND TUBES
    • \N
    • U-SHAPED FORM CUPS AND GUIDE ROLLERS WITH OUTER CIRCLE DIAMETER 120 MM
    • \N
    \N \N \N

    ADDITIONAL EQUIPMENT

    \N \N\N
      \N
    • FOCUSLINE
    • \N
    • SEAMLINE TUBE
    • \N
    \N \NAUTOMATION\N \N\N
      \N
    • LOADMASTER TUBE WITH BUNDLE MAGAZINE LD 6000 (PLASTIC ROLLERS)
    • \N
    \N \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-general

project no.: 904908
number: 1 pcs.
manufacturer: traub
type: tnc 42/65 dgy
control: traub tx 8 h
year of construction: 1999
state of preservation: second-hand machine

description

turning

maximum turning length 450 mm
maximum chuck diameter 175 mm
max speed main spindle 5600 1/min
maximum performance main spindle in ed 10-40 / 100% 18.5 kw
main spindle spindle passage 42 mm
axes on the main spindle unit c
maximum rotation speed 5600 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 11 kw
spindle passage counter spindle 42 mm
axis counter spindle unit v/c
travel in v counter spindle unit 520 mm
maximum rapid traverse speed v counter spindle unit 30 m / min

turret top
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the revolver x/y/z axes
travel in x/y/z 140/70/450 mm
maximum rapid traverse in x/y/z 15/6/30 m / min

gun down
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the turret of x/z axes
travel in x/y/z 140 /-/ 450 mm
maximum rapid traverse in x/y/z 15 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
preparation for central oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system
optional on request: 70 bar - high pressure pump unit
the belt of part of
precast acceptance facility
bar loader/bar feeder traub stamag dnh 42

general technical data

total power consumption 49 kva
machine dimensions (lxwxh) approx. 2562 x 1969 x 1790 mm
machine weight 5600 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904908 NUMBER: 1 PCS. MANUFACTURER: TRAUB TYPE: TNC 42/65 DGY CONTROL: TRAUB TX 8 H YEAR OF CONSTRUCTION: 1999 STATE OF PRESERVATION: SECOND-HAND MACHINE DESCRIPTION TURNING MAXIMUM TURNING LENGTH 450 MM MAXIMUM CHUCK DIAMETER 175 MM MAX SPEED MAIN SPINDLE 5600 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 18.5 KW MAIN SPINDLE SPINDLE PASSAGE 42 MM AXES ON THE MAIN SPINDLE UNIT C MAXIMUM ROTATION SPEED 5600 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 11 KW SPINDLE PASSAGE COUNTER SPINDLE 42 MM AXIS COUNTER SPINDLE UNIT V/C TRAVEL IN V COUNTER SPINDLE UNIT 520 MM MAXIMUM RAPID TRAVERSE SPEED V COUNTER SPINDLE UNIT 30 M / MIN TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE REVOLVER X/Y/Z AXES TRAVEL IN X/Y/Z 140/70/450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15/6/30 M / MIN GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE TURRET OF X/Z AXES TRAVEL IN X/Y/Z 140 /-/ 450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA PREPARATION FOR CENTRAL OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM OPTIONAL ON REQUEST: 70 BAR - HIGH PRESSURE PUMP UNIT THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER TRAUB STAMAG DNH 42 GENERAL TECHNICAL DATA TOTAL POWER CONSUMPTION 49 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2562 X 1969 X 1790 MM MACHINE WEIGHT 5600 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
    Vendedor: Wolfgang Finken GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1649</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3030</td> </tr> <tr> <td>year:</td> <td>2006</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>2000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>74.731h/0h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>4 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>3 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 2000 watt new in 2018 incl. 12 months warranty by the manufacturer, radio-frequency excited, chiller, logbook function</li>\n	<li>automatic pallet changer with longitudinal conveyer for small parts / slag</li>\n	<li>drives: maintenance-free 3-phase servo motors</li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system pss</li>\n	<li>high-speed processing with sprintlas</li>\n	<li>contourlas for producing small holes</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>laser cutting head with 5 lens and laser cutting head with 7.5 lens</li>\n	<li>positioning laser diode</li>\n	<li>cutting head quick-change device</li>\n	<li>automatic focus setting autolas plus</li>\n	<li>apc advanced process control</li>\n	<li>automatic sheet edge detection</li>\n	<li>microweld</li>\n	<li>programmable power cycles</li>\n	<li>oil spray device for reliable thick plate machining</li>\n	<li>laser power control</li>\n	<li>automatic shutdown</li>\n	<li>work area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy</li>\n	<li>to use, online help, diagnostic functions, maintenance logbook,</li>\n	<li>technology data, teleservice, 3.5 disk drive, bnc-/rj45 connection</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and</li>\n	<li>purged beam delivery, monitoring system, multi-chamber extraction system </li>\n	<li>and compact dust extractor, machine enclosure consisting of macrolon panels</li>\n</ul>\n

    TECHNICAL DATA

    ITEM NUMBER: LM-1649
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 3030
    YEAR: 2006
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 2000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 74.731H/0H
    MAX. SHEET THICK./ST: 12 MM
    MAX. SHEET THICK./VA: 4 MM
    MAX. SHEET THICK./AI: 3 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 9300 MM
    WIDTH: 4600 MM
    HEIGHT: 2000 MM
    WEIGHT: 11500 KG

    \N \N \N

    STANDARD CONFIGURATION

    \N \N\N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 2000 WATT NEW IN 2018 INCL. 12 MONTHS WARRANTY BY THE MANUFACTURER, RADIO-FREQUENCY EXCITED, CHILLER, LOGBOOK FUNCTION
    • \N
    • AUTOMATIC PALLET CHANGER WITH LONGITUDINAL CONVEYER FOR SMALL PARTS / SLAG
    • \N
    • DRIVES: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • PLASMA SENSOR SYSTEM PSS
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • LASER CUTTING HEAD WITH 5 LENS AND LASER CUTTING HEAD WITH 7.5 LENS
    • \N
    • POSITIONING LASER DIODE
    • \N
    • CUTTING HEAD QUICK-CHANGE DEVICE
    • \N
    • AUTOMATIC FOCUS SETTING AUTOLAS PLUS
    • \N
    • APC ADVANCED PROCESS CONTROL
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • MICROWELD
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • LASER POWER CONTROL
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORK AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY
    • \N
    • TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK,
    • \N
    • TECHNOLOGY DATA, TELESERVICE, 3.5 DISK DRIVE, BNC-/RJ45 CONNECTION
    • \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND
    • \N
    • PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM
    • \N
    • AND COMPACT DUST EXTRACTOR, MACHINE ENCLOSURE CONSISTING OF MACROLON PANELS
    • \N
    \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-aseptic pet filling line krones contiform aseptbloc, 24 000 bph
 
this aseptic pet line is suitable for pulpy and fibrous fruit juices, non-carbonated beverages, ice tea and dairy products. the hygienic level is so high that also milk-based infant formulas are possible. the line was installed in 2013 and is currently in production. it will be available in the summer 2019, and it can be inspected while operating. the delivery includes the product deaeration and pasteurizer, blower-filler-capper block, preform and cap feeding and inspection systems, shrink packer, handle applicator and conveyors. note delivery does not include palletizing system.
 
the product first goes through gas removal treatment and is then pasteurized in a tubular heat exchanger. the product is cooled down and pumped into an aseptic buffer tank prior to filling. in the over pressurized filling and capping block empty bottles and bottle caps are sterilized with a gaseous h2o2. an h2o2 sensor outside the machine monitors any leaks of the sterilizing agent. also the pressure inside the filling block is monitored, and an automatic shutdown results if the pressure drops. a liquid nitrogen is injected after filling, to remove air from the container and to make the bottle rigid with internal pressure.
 
both preforms and caps are inspected and faulty pieces are automatically rejected before they are conveyed into the aseptic area. the delivery includes a set of different molds for the blow molder which are changed in a special clean room in the blow molder, eliminating the need to enter the aseptic area of the machine. the bottle size change is done very easily in the filler-capper by a mechanical adjustment, and no change parts are needed except the molds in the blow molder.
 
technical data  
 
blower-filler-capper
type:                           krones contiform aseptbloc
year:                           2013
capacity:                     24 000 bph in 0.33 and 0.5 ltr
                                   18 000 bph in 1.0 ltr
                                   12 000 bph in 1.5 ltr
cap type:                     38 mm, plastic wide mouth screw
blowing heads:           16
filling heads:             44
capping heads:           22
sterilizing agent:         h2o2, gaseous nitrogen peroxide
operating hours:         23 378 hrs (in september 2018, still operating)
filling temperature:    3 – 25 °c
 
product treatment 
type:                           krones varioasept
year:                           2012
treatment:                   deaeration and pasteurization
pasteurizer type:         tubular, suitable for pulp and fiber containing products
pasteurizing temperature:       95 – 105 °c
 
labeler
type:                           krones contiroll
year:                           2011
operating hours:         25 889 hrs
label type:                  opp, reel fed, hot glue
 
shrink packer
type:                           khs kisters sp 050 b
year:                           2004
operating hours:         13 027 hrs
control plc:             siemens simatic
handle applicator:      khs innopack csm 050-2-lm, 2004
  ASEPTIC PET FILLING LINE KRONES CONTIFORM ASEPTBLOC, 24 000 BPH THIS ASEPTIC PET LINE IS SUITABLE FOR PULPY AND FIBROUS FRUIT JUICES, NON-CARBONATED BEVERAGES, ICE TEA AND DAIRY PRODUCTS. THE HYGIENIC LEVEL IS SO HIGH THAT ALSO MILK-BASED INFANT FORMULAS ARE POSSIBLE. THE LINE WAS INSTALLED IN 2013 AND IS CURRENTLY IN PRODUCTION. IT WILL BE AVAILABLE IN THE SUMMER 2019, AND IT CAN BE INSPECTED WHILE OPERATING. THE DELIVERY INCLUDES THE PRODUCT DEAERATION AND PASTEURIZER, BLOWER-FILLER-CAPPER BLOCK, PREFORM AND CAP FEEDING AND INSPECTION SYSTEMS, SHRINK PACKER, HANDLE APPLICATOR AND CONVEYORS. NOTE DELIVERY DOES NOT INCLUDE PALLETIZING SYSTEM. THE PRODUCT FIRST GOES THROUGH GAS REMOVAL TREATMENT AND IS THEN PASTEURIZED IN A TUBULAR HEAT EXCHANGER. THE PRODUCT IS COOLED DOWN AND PUMPED INTO AN ASEPTIC BUFFER TANK PRIOR TO FILLING. IN THE OVER PRESSURIZED FILLING AND CAPPING BLOCK EMPTY BOTTLES AND BOTTLE CAPS ARE STERILIZED WITH A GASEOUS H2O2. AN H2O2 SENSOR OUTSIDE THE MACHINE MONITORS ANY LEAKS OF THE STERILIZING AGENT. ALSO THE PRESSURE INSIDE THE FILLING BLOCK IS MONITORED, AND AN AUTOMATIC SHUTDOWN RESULTS IF THE PRESSURE DROPS. A LIQUID NITROGEN IS INJECTED AFTER FILLING, TO REMOVE AIR FROM THE CONTAINER AND TO MAKE THE BOTTLE RIGID WITH INTERNAL PRESSURE. BOTH PREFORMS AND CAPS ARE INSPECTED AND FAULTY PIECES ARE AUTOMATICALLY REJECTED BEFORE THEY ARE CONVEYED INTO THE ASEPTIC AREA. THE DELIVERY INCLUDES A SET OF DIFFERENT MOLDS FOR THE BLOW MOLDER WHICH ARE CHANGED IN A SPECIAL CLEAN ROOM IN THE BLOW MOLDER, ELIMINATING THE NEED TO ENTER THE ASEPTIC AREA OF THE MACHINE. THE BOTTLE SIZE CHANGE IS DONE VERY EASILY IN THE FILLER-CAPPER BY A MECHANICAL ADJUSTMENT, AND NO CHANGE PARTS ARE NEEDED EXCEPT THE MOLDS IN THE BLOW MOLDER. TECHNICAL DATA BLOWER-FILLER-CAPPER TYPE: KRONES CONTIFORM ASEPTBLOC YEAR: 2013 CAPACITY: 24 000 BPH IN 0.33 AND 0.5 LTR 18 000 BPH IN 1.0 LTR 12 000 BPH IN 1.5 LTR CAP TYPE: 38 MM, PLASTIC WIDE MOUTH SCREW BLOWING HEADS: 16 FILLING HEADS: 44 CAPPING HEADS: 22 STERILIZING AGENT: H2O2, GASEOUS NITROGEN PEROXIDE OPERATING HOURS: 23 378 HRS (IN SEPTEMBER 2018, STILL OPERATING) FILLING TEMPERATURE: 3 – 25 °C PRODUCT TREATMENT TYPE: KRONES VARIOASEPT YEAR: 2012 TREATMENT: DEAERATION AND PASTEURIZATION PASTEURIZER TYPE: TUBULAR, SUITABLE FOR PULP AND FIBER CONTAINING PRODUCTS PASTEURIZING TEMPERATURE: 95 – 105 °C LABELER TYPE: KRONES CONTIROLL YEAR: 2011 OPERATING HOURS: 25 889 HRS LABEL TYPE: OPP, REEL FED, HOT GLUE SHRINK PACKER TYPE: KHS KISTERS SP 050 B YEAR: 2004 OPERATING HOURS: 13 027 HRS CONTROL PLC: SIEMENS SIMATIC HANDLE APPLICATOR: KHS INNOPACK CSM 050-2-LM, 2004
    Vendedor: JADE Trading OY
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1598</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 6030</td> </tr> <tr> <td>year:</td> <td>2005</td> </tr> <tr> <td>working area:</td> <td>6000 x 2000 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>67.440h / 47.290h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>16100 mm</td> </tr> <tr> <td>width:</td> <td>5200 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>21500 kg</td> </tr> </tbody> </table> <br> \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 3200, <strong>reconditioned including 6 months warranty,</strong> lens monitoring sensor, radio-frequency excited, mirror telescope, chiller</li>\n	<li>automatic pallet changer and longitudinal conveyor for small parts / slag</li>\n	<li>drives with maintenance-free servo motors</li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system</li>\n	<li>high-speed processing with sprintlas</li>\n	<li>contourlas for producing small holes</li>\n	<li>microweld</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>laser cutting head with 5 lens </li>\n	<li>laser cutting head with 7.5 lens, dias iii</li>\n	<li>cutting head quick-change device</li>\n	<li>programmable power cycles</li>\n	<li>positioning laser diode</li>\n	<li>automatic sheet edge detection </li>\n	<li>automatic focus setting autolas plus</li>\n	<li>oil spray device for reliable thick plate machining</li>\n	<li>laser logbook function</li>\n	<li>automatic shutdown</li>\n	<li>work area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use, online help, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5 disk drive, bnc-/rj45 connection</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</li>\n</ul>\n \n<h3> <strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li>mdr integrated machine data recording</li>\n	<li>grooving end detection</li>\n	<li>mde interface</li>\n</ul>\n

    TECHNICAL DATA

    ITEM NUMBER: LM-1598
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 6030
    YEAR: 2005
    WORKING AREA: 6000 X 2000 X 115 MM
    LASER RATED OUTPUT: 3200 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 67.440H / 47.290H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 12 MM
    MAX. SHEET THICK./AI: 8 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 16100 MM
    WIDTH: 5200 MM
    HEIGHT: 2000 MM
    WEIGHT: 21500 KG

    \N \N \N

    STANDARD CONFIGURATION

    \N \N\N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 3200, RECONDITIONED INCLUDING 6 MONTHS WARRANTY, LENS MONITORING SENSOR, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER
    • \N
    • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG
    • \N
    • DRIVES WITH MAINTENANCE-FREE SERVO MOTORS
    • \N
    • HI-LAS HIGH PRESSURE CUTTING
    • \N
    • PLASMA SENSOR SYSTEM
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • MICROWELD
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • LASER CUTTING HEAD WITH 5 LENS
    • \N
    • LASER CUTTING HEAD WITH 7.5 LENS, DIAS III
    • \N
    • CUTTING HEAD QUICK-CHANGE DEVICE
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • POSITIONING LASER DIODE
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • AUTOMATIC FOCUS SETTING AUTOLAS PLUS
    • \N
    • OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • LASER LOGBOOK FUNCTION
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORK AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, 3.5 DISK DRIVE, BNC-/RJ45 CONNECTION
    • \N
    • SHOPFLOOR PROGRAMMING TOPS 100 LITE
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN
    • \N
    \N \N

    ADDITIONAL EQUIPMENT

    \N \N\N
      \N
    • MDR INTEGRATED MACHINE DATA RECORDING
    • \N
    • GROOVING END DETECTION
    • \N
    • MDE INTERFACE
    • \N
    \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-filling line khs 50 000 bottles / hour for returnable glass bottles 
  
this glass line was installed and commissioned by khs in year 2008 and operation was stopped in year 2009 and it was then properly cleaned and preserved, all plc programs were copied in that time. equipment has just 3600 total working hours and presently complete line is in perfect condition. the line is designed to fill beer in 0.5 litre returnable glass bottles at capacity of 50 000 bph bottles arriving and leaving in plastic crates placed on wooden pallets. all bottle conveyors are made by khs and they have automatic lubrication system, sew servo drives and danfos frequency converters.  full documentation in german and russian language, plc programs with comments in german language. 
 
main characteristics of this line
  
manufacturer	khs germany 
manufacturing year	2008 
capacity	50 000 bph 
total running hours	approx. 3600 only 
bottles	returnable 0.5 liter glass
caps	crown cork  
plastic case size for 20 bottles	400 x 300 x 277 mm
crate on a pallet	10 in a layer, stacked in 5 layers  
pallet size	1200 x 1000 mm + euro pallet  
plc controls	siemens s7 series and kuka 
 FILLING LINE KHS 50 000 BOTTLES / HOUR FOR RETURNABLE GLASS BOTTLES THIS GLASS LINE WAS INSTALLED AND COMMISSIONED BY KHS IN YEAR 2008 AND OPERATION WAS STOPPED IN YEAR 2009 AND IT WAS THEN PROPERLY CLEANED AND PRESERVED, ALL PLC PROGRAMS WERE COPIED IN THAT TIME. EQUIPMENT HAS JUST 3600 TOTAL WORKING HOURS AND PRESENTLY COMPLETE LINE IS IN PERFECT CONDITION. THE LINE IS DESIGNED TO FILL BEER IN 0.5 LITRE RETURNABLE GLASS BOTTLES AT CAPACITY OF 50 000 BPH BOTTLES ARRIVING AND LEAVING IN PLASTIC CRATES PLACED ON WOODEN PALLETS. ALL BOTTLE CONVEYORS ARE MADE BY KHS AND THEY HAVE AUTOMATIC LUBRICATION SYSTEM, SEW SERVO DRIVES AND DANFOS FREQUENCY CONVERTERS. FULL DOCUMENTATION IN GERMAN AND RUSSIAN LANGUAGE, PLC PROGRAMS WITH COMMENTS IN GERMAN LANGUAGE. MAIN CHARACTERISTICS OF THIS LINE MANUFACTURER KHS GERMANY MANUFACTURING YEAR 2008 CAPACITY 50 000 BPH TOTAL RUNNING HOURS APPROX. 3600 ONLY BOTTLES RETURNABLE 0.5 LITER GLASS CAPS CROWN CORK PLASTIC CASE SIZE FOR 20 BOTTLES 400 X 300 X 277 MM CRATE ON A PALLET 10 IN A LAYER, STACKED IN 5 LAYERS PALLET SIZE 1200 X 1000 MM + EURO PALLET PLC CONTROLS SIEMENS S7 SERIES AND KUKA
    Vendedor: JADE Trading OY
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1565</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 2530</td> </tr> <tr> <td>year:</td> <td>1998</td> </tr> <tr> <td>working area:</td> <td>2500 x 1250 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>1500 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>46.568/23.689h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>12  mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>4  mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>3 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,01 mm</td> </tr> <tr> <td>length:</td> <td>6500 mm</td> </tr> <tr> <td>width:</td> <td>5900 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>7000 kg</td> </tr> </tbody> </table> <br> <h3> <strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 1500, radio-frequency excited, mirror telescope, chiller</li>\n	<li>automatic lift door</li>\n	<li>drives with maintenance-free servo motors </li>\n	<li>high-speed processing with sprintlas </li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>laser cutting head with 5 lens</li>\n	<li>cutting head quick-change device</li>\n	<li>capacitive height regulation (dias)</li>\n	<li>automatic shutdown</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use, online help, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5 disc drive</li>\n	<li>safety: beam delivery is completely encapsulated and ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</li>\n</ul>\n \n<h3> <strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li>automatic palett changer</li>\n	<li>laser cutting head with 7,5 lens</li>\n	<li>light barriers</li>\n</ul>\n

    TECHNICAL DATA

    ITEM NUMBER: LM-1565
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 2530
    YEAR: 1998
    WORKING AREA: 2500 X 1250 X 115 MM
    LASER RATED OUTPUT: 1500 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 46.568/23.689H
    MAX. SHEET THICK./ST: 12 MM
    MAX. SHEET THICK./VA: 4 MM
    MAX. SHEET THICK./AI: 3 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: 0,01 MM
    LENGTH: 6500 MM
    WIDTH: 5900 MM
    HEIGHT: 2000 MM
    WEIGHT: 7000 KG

    STANDARD CONFIGURATION

    \N \N\N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TLF 1500, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER
    • \N
    • AUTOMATIC LIFT DOOR
    • \N
    • DRIVES WITH MAINTENANCE-FREE SERVO MOTORS
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • LASER CUTTING HEAD WITH 5 LENS
    • \N
    • CUTTING HEAD QUICK-CHANGE DEVICE
    • \N
    • CAPACITIVE HEIGHT REGULATION (DIAS)
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, 3.5 DISC DRIVE
    • \N
    • SAFETY: BEAM DELIVERY IS COMPLETELY ENCAPSULATED AND VENTILATED, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN
    • \N
    \N \N

    ADDITIONAL EQUIPMENT

    \N \N\N
      \N
    • AUTOMATIC PALETT CHANGER
    • \N
    • LASER CUTTING HEAD WITH 7,5 LENS
    • \N
    • LIGHT BARRIERS
    • \N
    \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-high-speed submersible mixer
propeller diameter: 650 mm
speed: 462 u/min
drive 10 kw
year of constr.: 2017 (still unused)
the compact mixer with waterproof encapsulated submersible motor is suitable for numerous applications such as: mixing, mixing and recirculation in municipal wastewater treatment plants, in industry and in agriculture HIGH-SPEED SUBMERSIBLE MIXER PROPELLER DIAMETER: 650 MM SPEED: 462 U/MIN DRIVE 10 KW YEAR OF CONSTR.: 2017 (STILL UNUSED) THE COMPACT MIXER WITH WATERPROOF ENCAPSULATED SUBMERSIBLE MOTOR IS SUITABLE FOR NUMEROUS APPLICATIONS SUCH AS: MIXING, MIXING AND RECIRCULATION IN MUNICIPAL WASTEWATER TREATMENT PLANTS, IN INDUSTRY AND IN AGRICULTURE
    Vendedor: ENDERS Produktion GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1685</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 3040</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>4000 x 2000 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>45.561 h / 23.289 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>11600 mm</td> </tr> <tr> <td>width:</td> <td>5200 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>16500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser truflow 3200 watt, radio-frequency excited, mirror telescope, chiller, logbook function </li>\n	<li>automatic pallet changer</li>\n	<li>longitudinal conveyor for small parts/slag</li>\n	<li>drives with maintenance-free servo motors</li>\n	<li>laser cutting head with 5 lens</li>\n	<li>laser cutting head with 7,5 lens</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>controlline: maintains a constant stand-off between the nozzle and the workpiece during the cutting operation</li>\n	<li>focusline: program-controlled focus adjustment to different material types and thicknesses</li>\n	<li>laser power control</li>\n	<li>positioning laser diode</li>\n	<li>nitroline: high-pressure cutting </li>\n	<li>sprintline: high-speed processing</li>\n	<li>contourline: for producing small holes</li>\n	<li>plasmaline</li>\n	<li>automatic sheet edge detection </li>\n	<li>programmable power cycles</li>\n	<li>microweld</li>\n	<li>spray device for reliable thick plate machining</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use</li>\n</ul>\nonline help, diagnostic functions, maintenance logbook, technology data, teleservice \n\n	<ul>\n	<li>shopfloor programming</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact</li>\n</ul>\n dust extractor, safety cabin \n\n	<ul>\n	<li>network connection rj45, 3.5 disk drive, tft color screen</li>\n</ul>\n \n<strong>additional configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>pierceline</li>\n</ul>\n \n<strong> </strong> </h3>

    TECHNICAL DATA

    ITEM NUMBER: LM-1685
    MANUFACTURER: TRUMPF
    TYPE: TRULASER 3040
    YEAR: 2008
    WORKING AREA: 4000 X 2000 X 115 MM
    LASER RATED OUTPUT: 3200 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 45.561 H / 23.289 H
    MAX. SHEET THICK./ST: 20 MM
    MAX. SHEET THICK./VA: 12 MM
    MAX. SHEET THICK./AI: 8 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 11600 MM
    WIDTH: 5200 MM
    HEIGHT: 2000 MM
    WEIGHT: 16500 KG

    \N \N \NSTANDARD CONFIGURATION \N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • LASER UNIT: CO2 LASER TRUFLOW 3200 WATT, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER, LOGBOOK FUNCTION
    • \N
    • AUTOMATIC PALLET CHANGER
    • \N
    • LONGITUDINAL CONVEYOR FOR SMALL PARTS/SLAG
    • \N
    • DRIVES WITH MAINTENANCE-FREE SERVO MOTORS
    • \N
    • LASER CUTTING HEAD WITH 5 LENS
    • \N
    • LASER CUTTING HEAD WITH 7,5 LENS
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • CONTROLLINE: MAINTAINS A CONSTANT STAND-OFF BETWEEN THE NOZZLE AND THE WORKPIECE DURING THE CUTTING OPERATION
    • \N
    • FOCUSLINE: PROGRAM-CONTROLLED FOCUS ADJUSTMENT TO DIFFERENT MATERIAL TYPES AND THICKNESSES
    • \N
    • LASER POWER CONTROL
    • \N
    • POSITIONING LASER DIODE
    • \N
    • NITROLINE: HIGH-PRESSURE CUTTING
    • \N
    • SPRINTLINE: HIGH-SPEED PROCESSING
    • \N
    • CONTOURLINE: FOR PRODUCING SMALL HOLES
    • \N
    • PLASMALINE
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • MICROWELD
    • \N
    • SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORKING AREA LIGHTING
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE
    • \N
    \NONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE \N\N
      \N
    • SHOPFLOOR PROGRAMMING
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT
    • \N
    \N DUST EXTRACTOR, SAFETY CABIN \N\N
      \N
    • NETWORK CONNECTION RJ45, 3.5 DISK DRIVE, TFT COLOR SCREEN
    • \N
    \N \NADDITIONAL CONFIGURATION \N \N
      \N
    • PIERCELINE
    • \N
    \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Precio: 11.500 €
    Ubicación: Land-compact edge banding machine brandt optimat kdf 340
built in 2006
machine fully functional
in the following units:
1 trimming unit 2 x 2.2 of kw 200 hz to attach before the gluing unit, 2 engines (1 x equal, opposite, 1 x) maximum chip removal / hub 3 mm
2. glue unit for hotmelt granulate
glue specification on the workpiece by means of glue roll in dc or opposite.
electronic glue pot temperature control
3. caps saw unit for front and rear edges overhang
2 motors per 0,18 kw, 200 hz, 12.000 rpm, chamfer/straight pneumatic adjustment
4. flush milling unit top and bottom with vertical and horizontal keying.
2 motors per 0,27 kw, 200 hz, 12,000 rpm
5. scraping unit for pvc edges
6 buffing unit
electronics control pc 16 +
brandt - control system with color graphic user interface for easy and
convenient operation and programming
technical data:
workpiece thickness 8-50 mm
fixed lengths 0.4-3.0 mm max (3 x 55 mm)
roll cut 0.4 3.0 mm (max. 3 x 30 mm / 1.0 x 55 mm)
feed about 9 m / min.
power consumption approx. 10 kw
machine dimensions l x h x d 3900 x 1370 x 620 (1100 with plate) mm
weight approx. 1100 kg

COMPACT EDGE BANDING MACHINE BRANDT OPTIMAT KDF 340 BUILT IN 2006 MACHINE FULLY FUNCTIONAL IN THE FOLLOWING UNITS: 1 TRIMMING UNIT 2 X 2.2 OF KW 200 HZ TO ATTACH BEFORE THE GLUING UNIT, 2 ENGINES (1 X EQUAL, OPPOSITE, 1 X) MAXIMUM CHIP REMOVAL / HUB 3 MM 2. GLUE UNIT FOR HOTMELT GRANULATE GLUE SPECIFICATION ON THE WORKPIECE BY MEANS OF GLUE ROLL IN DC OR OPPOSITE. ELECTRONIC GLUE POT TEMPERATURE CONTROL 3. CAPS SAW UNIT FOR FRONT AND REAR EDGES OVERHANG 2 MOTORS PER 0,18 KW, 200 HZ, 12.000 RPM, CHAMFER/STRAIGHT PNEUMATIC ADJUSTMENT 4. FLUSH MILLING UNIT TOP AND BOTTOM WITH VERTICAL AND HORIZONTAL KEYING. 2 MOTORS PER 0,27 KW, 200 HZ, 12,000 RPM 5. SCRAPING UNIT FOR PVC EDGES 6 BUFFING UNIT ELECTRONICS CONTROL PC 16 + BRANDT - CONTROL SYSTEM WITH COLOR GRAPHIC USER INTERFACE FOR EASY AND CONVENIENT OPERATION AND PROGRAMMING TECHNICAL DATA: WORKPIECE THICKNESS 8-50 MM FIXED LENGTHS 0.4-3.0 MM MAX (3 X 55 MM) ROLL CUT 0.4 3.0 MM (MAX. 3 X 30 MM / 1.0 X 55 MM) FEED ABOUT 9 M / MIN. POWER CONSUMPTION APPROX. 10 KW MACHINE DIMENSIONS L X H X D 3900 X 1370 X 620 (1100 WITH PLATE) MM WEIGHT APPROX. 1100 KG
    Vendedor: Marevi
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1690</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3030</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>2400 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>34.871h / 5.261h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>6 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>5 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>13140kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>closed machine frame with integrated laser unit </li>\n	<li> <strong> </strong> <strong> </strong>co2 laser tlf 2400 watt, radio-frequency excited, mirror telescope, chiller</li>\n	<li> <strong> </strong>automatic pallet changer and longitudinal conveyor for small parts / slag</li>\n	<li> <strong> </strong>drives: maintenance-free 3-phase servo motors</li>\n	<li> <strong> </strong>cutting head quick change device with 5 lens</li>\n	<li> <strong> </strong>additional cutting head with 7.5 lens</li>\n	<li> <strong> </strong>dias</li>\n	<li> <strong> </strong>automatic sheet edge detection</li>\n	<li> <strong> </strong>programmable cutting gas pressure setting</li>\n	<li> <strong> </strong>hi-las </li>\n	<li>pss plasma sensor system</li>\n	<li> <strong> </strong>positioning laser diode</li>\n	<li> <strong> </strong>microweld</li>\n	<li> <strong> </strong>programmable power cycles</li>\n	<li> <strong> </strong>high-speed processing with sprintlas</li>\n	<li> <strong> </strong>automatic focus setting autolas plus</li>\n	<li> <strong> </strong>contourlas for producing small holes</li>\n	<li> <strong> </strong>oil spray device for reliable thick plate machining</li>\n	<li> <strong> </strong>laser logbook function</li>\n	<li> <strong> </strong>automatic shutdown</li>\n	<li> <strong> </strong> <strong> </strong>sinumerik 840d control: open pc-basesd control system, easy to use, online help, diagnostic functions, maintenance logbook, technological data, teleservice, 3.5 floppy disk drive, bnc-/rj45 connection</li>\n	<li>integrated machine data recording (mdr)</li>\n	<li> <strong> </strong>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</li>\n</ul> </h3>\n</h3> \n<strong> </strong> </h3>

    TECHNICAL DATA

    ITEM NUMBER: LM-1690
    MANUFACTURER: TRUMPF
    TYPE: TRUMATIC L 3030
    YEAR: 2001
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 2400 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 34.871H / 5.261H
    MAX. SHEET THICK./ST: 15 MM
    MAX. SHEET THICK./VA: 6 MM
    MAX. SHEET THICK./AI: 5 MM
    MAX. SPEED: 60/85 M/MIN
    POSITIONING ACCURACY: +/- 0,1 MM
    LENGTH: 9300 MM
    WIDTH: 4600 MM
    HEIGHT: 2000 MM
    WEIGHT: 13140KG

    \N \N \NSTANDARD CONFIGURATION \N \N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • CO2 LASER TLF 2400 WATT, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER
    • \N
    • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG
    • \N
    • DRIVES: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
    • \N
    • CUTTING HEAD QUICK CHANGE DEVICE WITH 5 LENS
    • \N
    • ADDITIONAL CUTTING HEAD WITH 7.5 LENS
    • \N
    • DIAS
    • \N
    • AUTOMATIC SHEET EDGE DETECTION
    • \N
    • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
    • \N
    • HI-LAS
    • \N
    • PSS PLASMA SENSOR SYSTEM
    • \N
    • POSITIONING LASER DIODE
    • \N
    • MICROWELD
    • \N
    • PROGRAMMABLE POWER CYCLES
    • \N
    • HIGH-SPEED PROCESSING WITH SPRINTLAS
    • \N
    • AUTOMATIC FOCUS SETTING AUTOLAS PLUS
    • \N
    • CONTOURLAS FOR PRODUCING SMALL HOLES
    • \N
    • OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
    • \N
    • LASER LOGBOOK FUNCTION
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • SINUMERIK 840D CONTROL: OPEN PC-BASESD CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGICAL DATA, TELESERVICE, 3.5 FLOPPY DISK DRIVE, BNC-/RJ45 CONNECTION
    • \N
    • INTEGRATED MACHINE DATA RECORDING (MDR)
    • \N
    • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN
    • \N
    \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-mazak laser cutting system stx510 mkii 1, 5kw
year of construction: 2006
very well preserved, completely outdated mazak laser machines with 1500w
panel sizes: 3000 mm x 1500 mm
minimal footprint by 2, 9 m x 7, 3 m
small part conveyor
completely encapsulated engine cover fe: up to 12 mm
va: up to 8mm
almg: up to 6mm
plastic can
incl. software
including warranty
incl. commissioning + training

= optional with automatic loading and unloading.
 MAZAK LASER CUTTING SYSTEM STX510 MKII 1, 5KW YEAR OF CONSTRUCTION: 2006 VERY WELL PRESERVED, COMPLETELY OUTDATED MAZAK LASER MACHINES WITH 1500W PANEL SIZES: 3000 MM X 1500 MM MINIMAL FOOTPRINT BY 2, 9 M X 7, 3 M SMALL PART CONVEYOR COMPLETELY ENCAPSULATED ENGINE COVER FE: UP TO 12 MM VA: UP TO 8MM ALMG: UP TO 6MM PLASTIC CAN INCL. SOFTWARE INCLUDING WARRANTY INCL. COMMISSIONING + TRAINING = OPTIONAL WITH AUTOMATIC LOADING AND UNLOADING.
    Vendedor: H+S Maschinentechnik GmbH
    Año de construcción: usado
    Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1667</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>7000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>38193 / 14661h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>30 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>20 mm</td> </tr> <tr> <td>max. speed:</td> <td>300 m / min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>11000 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n \n \n<strong>standard configuration</strong> </h3>\n \n<strong>machine</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>closed machine frame with integrated laser unit</li>\n	<li>driving device for a high-precision machining</li>\n	<li>automatic pallet changer</li>\n	<li>longitudinal conveyer</li>\n	<li>drives: gantry drive in combination with linear direct drive</li>\n	<li>encapsulated beam guideway</li>\n	<li>new: one-cutting-head-strategy</li>\n	<li>nitroline</li>\n	<li>fastline</li>\n	<li>flyline</li>\n	<li>focusline</li>\n	<li>plasmaline</li>\n	<li>sprintline</li>\n	<li>contourline</li>\n	<li>microweld</li>\n	<li>oil spray device</li>\n	<li>positioning laser diode</li>\n	<li>programmable cutting gas selection/pressure setting</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>trutops laser lite</li>\n	<li>tft colour screen</li>\n	<li>shop floor programming</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>trumpf laser</strong> </li>\n	<li>co2-laser truflow 7000</li>\n	<li>maintenance-free radial turbo blowers</li>\n	<li>high frequency excitement</li>\n	<li>laser control tasc 3</li>\n	<li>laser power control</li>\n	<li>logbook function laser</li>\n	<li>cooling unit</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>laser cutting head</strong> </li>\n	<li>lensline with status check</li>\n	<li>laser cutting head with 250mm lens</li>\n	<li>laser cutting head quick change device (uti)</li>\n	<li>controlline</li>\n	<li>pierceline</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>control</strong> </li>\n	<li>control siemens sinumerik 840d</li>\n	<li>simple operation</li>\n	<li>integrated technology data</li>\n	<li>online-help</li>\n	<li>integrated e-shop</li>\n	<li>diagnostic functions</li>\n	<li>teleservice</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>data transfer</strong> </li>\n	<li>rj45 network connection </li>\n	<li>usb interface</li>\n	<li> </li>\n	<li> <strong> </strong> </h3> <strong> </strong> <strong>safety</strong> </li>\n	<li>ce-marking</li>\n	<li>light barriers</li>\n	<li>laser monitoring system</li>\n	<li>multi chamber extraction system</li>\n	<li>compact dust extractor</li>\n	<li>machine cover with makrolon panels</li>\n	<li> </h3> </h3> </li>\n	<li> <strong> </strong> </h3> <strong>additional equipment</strong> </h3> </li>\n	<li> <strong> </strong> </h3> </li>\n	<li>machine up to 43° ambient temperature</li>\n	<li> </li>\n	<li> <strong> </strong> </h3> <strong>automation</strong> </h3> </li>\n	<li> <strong> </strong> </h3> </li>\n	<li>preparation loadmaster</li>\n</ul>\n \n

    TECHNICAL DATA

    ITEM NUMBER: LM-1667
    MANUFACTURER: TRUMPF
    TYPE: TRULASER 5030
    YEAR: 2008
    WORKING AREA: 3000 X 1500 X 115 MM
    LASER RATED OUTPUT: 7000 WATT
    CONTROL: SIEMENS SINUMERIK 840 D
    WORKING HOUR: 38193 / 14661H
    MAX. SHEET THICK./ST: 25 MM
    MAX. SHEET THICK./VA: 30 MM
    MAX. SHEET THICK./AI: 20 MM
    MAX. SPEED: 300 M / MIN
    POSITIONING ACCURACY: 0,1 MM
    LENGTH: 11000 MM
    WIDTH: 4600 MM
    HEIGHT: 2400 MM
    WEIGHT: 12000 KG

    \N \N \NSTANDARD CONFIGURATION \N \NMACHINE\N \N
      \N
    • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
    • \N
    • DRIVING DEVICE FOR A HIGH-PRECISION MACHINING
    • \N
    • AUTOMATIC PALLET CHANGER
    • \N
    • LONGITUDINAL CONVEYER
    • \N
    • DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVE
    • \N
    • ENCAPSULATED BEAM GUIDEWAY
    • \N
    • NEW: ONE-CUTTING-HEAD-STRATEGY
    • \N
    • NITROLINE
    • \N
    • FASTLINE
    • \N
    • FLYLINE
    • \N
    • FOCUSLINE
    • \N
    • PLASMALINE
    • \N
    • SPRINTLINE
    • \N
    • CONTOURLINE
    • \N
    • MICROWELD
    • \N
    • OIL SPRAY DEVICE
    • \N
    • POSITIONING LASER DIODE
    • \N
    • PROGRAMMABLE CUTTING GAS SELECTION/PRESSURE SETTING
    • \N
    • AUTOMATIC SHUTDOWN
    • \N
    • WORKING AREA LIGHTING
    • \N
    • TRUTOPS LASER LITE
    • \N
    • TFT COLOUR SCREEN
    • \N
    • SHOP FLOOR PROGRAMMING
    • \N
    • \N
    • TRUMPF LASER
    • \N
    • CO2-LASER TRUFLOW 7000
    • \N
    • MAINTENANCE-FREE RADIAL TURBO BLOWERS
    • \N
    • HIGH FREQUENCY EXCITEMENT
    • \N
    • LASER CONTROL TASC 3
    • \N
    • LASER POWER CONTROL
    • \N
    • LOGBOOK FUNCTION LASER
    • \N
    • COOLING UNIT
    • \N
    • \N
    • LASER CUTTING HEAD
    • \N
    • LENSLINE WITH STATUS CHECK
    • \N
    • LASER CUTTING HEAD WITH 250MM LENS
    • \N
    • LASER CUTTING HEAD QUICK CHANGE DEVICE (UTI)
    • \N
    • CONTROLLINE
    • \N
    • PIERCELINE
    • \N
    • \N
    • CONTROL
    • \N
    • CONTROL SIEMENS SINUMERIK 840D
    • \N
    • SIMPLE OPERATION
    • \N
    • INTEGRATED TECHNOLOGY DATA
    • \N
    • ONLINE-HELP
    • \N
    • INTEGRATED E-SHOP
    • \N
    • DIAGNOSTIC FUNCTIONS
    • \N
    • TELESERVICE
    • \N
    • \N
    • DATA TRANSFER
    • \N
    • RJ45 NETWORK CONNECTION
    • \N
    • USB INTERFACE
    • \N
    • \N
    • SAFETY
    • \N
    • CE-MARKING
    • \N
    • LIGHT BARRIERS
    • \N
    • LASER MONITORING SYSTEM
    • \N
    • MULTI CHAMBER EXTRACTION SYSTEM
    • \N
    • COMPACT DUST EXTRACTOR
    • \N
    • MACHINE COVER WITH MAKROLON PANELS
    • \N
    • \N
    • ADDITIONAL EQUIPMENT
    • \N
    • \N
    • MACHINE UP TO 43° AMBIENT TEMPERATURE
    • \N
    • \N
    • AUTOMATION
    • \N
    • \N
    • PREPARATION LOADMASTER
    • \N
    \N \N
    Vendedor: I-H&S GmbH
    Año de construcción: usado
    Ubicación: Land-mazak laser cutting system ntx510 1, 5kw
year of construction: 2000
very well preserved, fully reconditioned mazak laser machines with 1500w
panel sizes: 3000 mm x 1500 mm
minimal footprint by 2, 9 m x 7 m
small part conveyor
completely encapsulated engine cover fe: up to 12 mm
va: up to 6mm
plastic can
incl. software
including warranty
incl. extraction system
incl. commissioning + training

= optional with automatic loading and unloading.

MAZAK LASER CUTTING SYSTEM NTX510 1, 5KW YEAR OF CONSTRUCTION: 2000 VERY WELL PRESERVED, FULLY RECONDITIONED MAZAK LASER MACHINES WITH 1500W PANEL SIZES: 3000 MM X 1500 MM MINIMAL FOOTPRINT BY 2, 9 M X 7 M SMALL PART CONVEYOR COMPLETELY ENCAPSULATED ENGINE COVER FE: UP TO 12 MM VA: UP TO 6MM PLASTIC CAN INCL. SOFTWARE INCLUDING WARRANTY INCL. EXTRACTION SYSTEM INCL. COMMISSIONING + TRAINING = OPTIONAL WITH AUTOMATIC LOADING AND UNLOADING.
    Vendedor: H+S Maschinentechnik GmbH
    Año de construcción: usado
    Ubicación: Land-with vacuum construction.<br/>for 3 bottle types.<br/>single head. <br/>id5298 WITH VACUUM CONSTRUCTION.
    FOR 3 BOTTLE TYPES.
    SINGLE HEAD.
    ID5298
    Vendedor: Seegräber GmbH
    Año de construcción: usado
    Precio: 333 €
    Ubicación: Land-igen4 110-xxl
refurbished in 2014
clicks after refurbishment: 5, 6 mio.
igen4 110-xxl
refurbished in 2014
clicks after refurbishment: 5, 6 mio.

performance

rated speed
range depending on paper size:
from 110 ipm for 7 IGEN4 110-XXL REFURBISHED IN 2014 CLICKS AFTER REFURBISHMENT: 5, 6 MIO. IGEN4 110-XXL REFURBISHED IN 2014 CLICKS AFTER REFURBISHMENT: 5, 6 MIO. PERFORMANCE RATED SPEED RANGE DEPENDING ON PAPER SIZE: FROM 110 IPM FOR 7 "X 7" TO 40 IPM FOR 14.33 X 22.5 " RESOLUTION 4800 × 600 × 1-BIT RECOMMENDED AVERAGE MONTHLY VOLUME 200.000-3,750,000 PAGES PER MONTH LINE SCREENS 150, 175, 200, OR 300 LPI, ALL UTILIZING 256 GRAY LEVELS CAPABILITIES PRINTED SIDES DUPLEX TECHNOLOGY NETWORK INTERFACES 10/100 BASET ETHERNET PROTOCOLS: TCP/IP, APPLETALK, NOVELL IPX/SPX, ETHERTALK ® NET BEUI, PHASE II, LPR/LPD PRINT ENGINE DIGITAL COLOR PRESS XEROGRAPHY PAPER HANDLING PAPER SOURCES UP TO 6 FEEDER MODULES, EACH WITH 2 TRAYS STANDARD PAPER CAPACITY 30.000 SHEETS MAXIMUM PAPER CAPACITY WITH OPTIONS 80.000 SHEETS AUTO DUPLEX AUTOMATIC DUPLEX WITH WIDE RADIUS INVERTER FOR SECOND SIDE IMAGING MEDIA DIMENSIONS-MINIMUM 7 X 7 INCHES MEDIA DIMENSIONS-MAXIMUM 14.33 X 22.5 INCHES MEDIA WEIGHT-MINIMUM 16 LBS MEDIA WEIGHT-MAXIMUM 130 LBS MEDIA TYPES COATED: GLOSS, MATTE, DULL, SILK UNCOATED, TEXTURED, SPECIALTY STOCKS RECYCLED, PERFORATED, TABS, TRANSPARENCIES, A WIDE VARIETY OF LABELS, SYNTHETICS DOCUCARD, NEVERTEAR, DURA PAPER ™ MIXED-STOCK JOBS SUPPORTED AT RATED SPEED NO DRYING TIME BEFORE COATING DOWNLOAD SPECIALTY MEDIA PROSPECTING GUIDE › INPUT TRAY 1 2.500 SHEETS TRAY 2 2.500 SHEETS OPTIONAL HIGH CAPACITY FEEDER LASERMAX ROLL SYSTEMS DOCUSHEETER ™ IG: 50.000 SHEETS OTHER INPUT DEVICES XEROX DOCUCARD SOLUTIONS TILTATRON/STACKATRON/ OUTPUT OUTPUT CAPACITY TWO CARTS PER STACKER; STACKER CART HOLDS 12 "80 LB. COATED TEXT (3.000 SHEETS)-UP TO FOUR STACKER TRUCKS AVAILABLE FINISHING FLATS GBC DELTA LAMINATOR GBC HI TAC LAMINATE FILM D&K SUPER STICK LAMINATE FILM EPIC CTI-635 INLINE COATING SYSTEM STITCHED SETS XEROX SQUAREFOLD BOOKLET MAKER CP BOURG BDFX BOOKLET MAKER DUPLO 5000 SYSTEM INLINE BOOKLET MAKER DUPLO SCC NEARLINE BOOKLET MAKER LAY FLATS GBC GBC DIGICOIL BINDER PUNCH FUSION II TAPE BOUND XEROX DB120-D DOCUMENT BINDER CASE BOUND ON DEMAND MACHINERY PERFECT BOUND XEROX MANUAL BOOK FACTORY CP BOURG BQ270 PERFECT BB3002 PERFECT BINDER STANDARD HORIZON BINDER BOOKLET MAKING XEROX SQUAREFOLD BOOKLET MAKER CP BOURG BDFX BOOKLET MAKER DUPLO 5000 SYSTEM INLINE BOOKLET MAKER DUPLO SCC NEARLINE BOOKLET MAKER OTHER FINISHING OPTIONS XEROX FINISHING INTERFACE KIT PRINT CONTROLLERS DIGITAL FRONT ENDS XEROX FREEFLOW PRINT SERVER FEATURES: MAXIMUM EFFICIENCY FOR SHORT-RUN, FAST-TURNAROUND COLOR JOBS HIGH PERFORMANCE AND PRODUCTIVITY FOR COMPLEX AND GRAPHIC INTENSE VI JOBS CONFIDENTCOLOR TECHNOLOGY INCLUDING: ICC DEVICELINK PROFILING AUTOMATIC IMAGE ENHANCEMENT OUTSTANDING COLOR AND IMAGE QUALITY CONTROLS SEAMLESS INTEROPERABILITY WITH FREEFLOW PRODUCT SUITE INTEGRATED PARALLEL RIP TECHNOLOGY PANTONE ™ LICENSED EASY-TO-USE, CUSTOMIZABLE GUI FOR JOB AND PRODUCTION MANAGEMENT COMPETITOR RECEIVE, RIP, AND PRINT 10/100/1000 BASET ETHERNET STANDARD NETWORK INTERFACES: PROTOCOLS: TCP/IP, NOVELL ® NDS ® IPX/SPX, APPLETALK ® IPP, IPP, DHCP, SNMP MIB II SUPPORT FOR THIRD-PARTY ADMINISTRATION TOOLS FILE SUPPORT: ADOBE ® POSTSCRIPT ® LEVEL 1, 2, 3 ADOBE ® ACROBAT ® 7.0, PDF 1.6, PDF/X TIFF, PCL5C, PCL6XL XEROX CX PRINT SERVER, POWERED BY CREO ™ FEATURES: HIGH PERFORMANCE RIP DESIGNED TO OPTIMIZE DIGITAL PRINTING AND VI APPLICATIONS WITH OUTSTANDING IMAGE QUALITY COMPREHENSIVE PRODUCTION TOOLS INCLUDING IMPOSITION, COLOR MANAGEMENT, IMAGE ENHANCEMENT, AND PREFLIGHT FLEXIBLE VARIABLE INFORMATION SUPPORT FOR VPS AND XEROX VIPP TRADITIONAL PRINT AND PRE-PRESS WORKFLOWS 10/100/1000 BASET ETHERNET STANDARD NETWORK INTERFACES: PROTOCOLS: TCP/IP, IPX/SPX, APPLETALK, NET BEUI FILE SUPPORT: POSTSCRIPT LEVEL 1, 2, 3 PDF/ACROBAT EPS, EPSF DCS, DCSF PRINT-READY RTP JOBS CREO VPS XEROX VIPP XEROX EX PRINT SERVER, POWERED BY FIERY ™ FEATURES: LEVERAGE RESOURCES MORE EFFICIENTLY ACHIEVE MAXIMUM PRODUCTIVITY AND POWER INCREASE PROFITS THROUGH FASTER SETUP AND PROCESSING OR HIGH MARGIN, COMPLEX JOBS ENSURE COLOR ACCURACY AND CONSISTENCY IMPROVE COMMUNICATION FOR ENHANCED CUSTOMER SATISFACTION INTEGRATE INTO MULTIPLE ENVIRONMENTS NETWORK STANDARD INTERFACES: TCP/IP, NOVELL ® IPX, APPLETALK, IPP ® (NDS) ETHERTALK ® PHASE II LPR/LPD 10/100/1000 BASET ETHERNET SMB PRINT SHARING (OVER TCP/IP) FILE SUPPORT: ADOBE ® POSTSCRIPT ® LEVEL 1, 2, 3 ADOBE PDF 1.5, 1.6 AND 1.7 (ACROBAT ® 6, 7 AND 8) PDF/X-1A AND 3 ENCAPSULATED POSTSCRIPT (EPS) DCS 2.0, CT/LW TAGGED IMAGE FILE FORMAT (TIFF AND TIFF/IT) JPEG JOBS THAT HAVE BEEN RIPED FOR IGEN4 (GRIDS) JOBS SUBMITTED FROM FREEFLOW MAKEREADY ® ® OR FREEFLOW PRINT MANAGER DISMANTLED BY XEROX, READY FOR INSPECTION/SHIPMENT
    Vendedor: Gutenberg Grafishe Machines B.V.
    Año de construcción: usado
    Ubicación: Land-8 capping heads  with 2 format sets and 1 snail <br/>id5300 8 CAPPING HEADS WITH 2 FORMAT SETS AND 1 SNAIL
    ID5300
    Vendedor: Seegräber GmbH
    Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)