441 ofertas

Año de construcción: usado
Ubicación: Land-manufacturer: mazak type: quick turn 28n
year of construction: 1991 control: mazatrol t 32-2
swing above bed: 510 mm
swing ã¼.planschlitten: 510 mm plan travel: 310 mm
longitudinal travel: 1010 mm
chuck diameter: kitagawa 210 mm three-jaw chuck
spindle bore: 80 mm
power: ca. 22 kw speed range from - to: 30-3000 rpm
dimensions approx.: 3235 x 1762 x 1850 lxwxh weight approx.: 5.300 kg equipment
axles: 2 tool carrier: 12 hollow clamping device: yes tailstock: yes
quill stroke automatic: yes
chip conveyor: yes

tool measurement

subject to error and sale.			
			
 MANUFACTURER: MAZAK TYPE: QUICK TURN 28N YEAR OF CONSTRUCTION: 1991 CONTROL: MAZATROL T 32-2 SWING ABOVE BED: 510 MM SWING ü.PLANSCHLITTEN: 510 MM PLAN TRAVEL: 310 MM LONGITUDINAL TRAVEL: 1010 MM CHUCK DIAMETER: KITAGAWA 210 MM THREE-JAW CHUCK SPINDLE BORE: 80 MM POWER: CA. 22 KW SPEED RANGE FROM - TO: 30-3000 RPM DIMENSIONS APPROX.: 3235 X 1762 X 1850 LXWXH WEIGHT APPROX.: 5.300 KG EQUIPMENT AXLES: 2 TOOL CARRIER: 12 HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES TOOL MEASUREMENT SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-
manufacturer: mazak type: quick turn 28n
year of construction: 1994 control: mazatrol t plus
swing above bed: 510 mm
swing ã¼.planschlitten: 510 mm plan travel: 310 mm
longitudinal travel: 1010 mm
chuck diameter: schunk rota nck 250 three-jaw chuck
spindle bore: 80 mm
power: ca. 22 kw speed range from - to: 30-3000 rpm
dimensions approx.: 3235 x 1762 x 1850 lxwxh weight approx.: 5.300 kg equipment
axles: 2 tool carrier: 12 hollow clamping device: yes tailstock: yes
quill stroke automatic: yes
chip conveyor: yes

tool measurement

subject to error and sale.			
			
 MANUFACTURER: MAZAK TYPE: QUICK TURN 28N YEAR OF CONSTRUCTION: 1994 CONTROL: MAZATROL T PLUS SWING ABOVE BED: 510 MM SWING ü.PLANSCHLITTEN: 510 MM PLAN TRAVEL: 310 MM LONGITUDINAL TRAVEL: 1010 MM CHUCK DIAMETER: SCHUNK ROTA NCK 250 THREE-JAW CHUCK SPINDLE BORE: 80 MM POWER: CA. 22 KW SPEED RANGE FROM - TO: 30-3000 RPM DIMENSIONS APPROX.: 3235 X 1762 X 1850 LXWXH WEIGHT APPROX.: 5.300 KG EQUIPMENT AXLES: 2 TOOL CARRIER: 12 HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES TOOL MEASUREMENT SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-make donati srl calcio (it), type pvc/r2, mach.no. ntp 700/520, elevator belt , material mild steel , belt material plastic , belt width 530mm, belt length 5200mm, with carriers , carrier height 50mm, with side guides /brushes, with motor 1,5 kw, 220/380 volt, mounted on frame , floorspace 7,0x1,2 mconveyor beltsconveyor screws > conveyor belts what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DONATI SRL CALCIO (IT), TYPE PVC/R2, MACH.NO. NTP 700/520, ELEVATOR BELT , MATERIAL MILD STEEL , BELT MATERIAL PLASTIC , BELT WIDTH 530MM, BELT LENGTH 5200MM, WITH CARRIERS , CARRIER HEIGHT 50MM, WITH SIDE GUIDES /BRUSHES, WITH MOTOR 1,5 KW, 220/380 VOLT, MOUNTED ON FRAME , FLOORSPACE 7,0X1,2 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-make: graffenstaden
model: aps 133
spindle diameter 130 mm
cross travel - x 3000 mm
vertical travel of spindle carrier - y 2000 mm 
stroke of the spindle - z 1200 mm 
banc en croix oui spindle taper sa 50/cm 6 facing head diameter 1040 mm 
table area 1800x2200 mm 
longitudinal travel of the column 1500 mm 
milling spindle diameter 240 mm rapid traverse 2000 mm/mn min 
distance between spindle center and table 50 mm maximum 
distance from spindle centre to table 2050 mm
  MAKE: GRAFFENSTADEN MODEL: APS 133 SPINDLE DIAMETER 130 MM CROSS TRAVEL - X 3000 MM VERTICAL TRAVEL OF SPINDLE CARRIER - Y 2000 MM STROKE OF THE SPINDLE - Z 1200 MM BANC EN CROIX OUI SPINDLE TAPER SA 50/CM 6 FACING HEAD DIAMETER 1040 MM TABLE AREA 1800X2200 MM LONGITUDINAL TRAVEL OF THE COLUMN 1500 MM MILLING SPINDLE DIAMETER 240 MM RAPID TRAVERSE 2000 MM/MN MIN DISTANCE BETWEEN SPINDLE CENTER AND TABLE 50 MM MAXIMUM DISTANCE FROM SPINDLE CENTRE TO TABLE 2050 MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-make donati srl calcio (it), type pvc/r2, mach.no. ntp 700/522, elevator belt , material mild steel , belt material plastic , belt width 540mm, belt length 6000mm, with carriers , carrier height 50mm, with side guides , with motor 1,5 kw, 220/380 volt, mounted on frame , floorspace 6,3x1,1 mconveyor beltsconveyor screws > conveyor belts what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DONATI SRL CALCIO (IT), TYPE PVC/R2, MACH.NO. NTP 700/522, ELEVATOR BELT , MATERIAL MILD STEEL , BELT MATERIAL PLASTIC , BELT WIDTH 540MM, BELT LENGTH 6000MM, WITH CARRIERS , CARRIER HEIGHT 50MM, WITH SIDE GUIDES , WITH MOTOR 1,5 KW, 220/380 VOLT, MOUNTED ON FRAME , FLOORSPACE 6,3X1,1 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 24 €
Ubicación: Land-we offer for sale:

pallet rack accessories

used tie-bars

manufacturer: bito

yr0iig
suitable for the rack system bito pro frame 2012

1 traverse/mat, about 3,600 x pt 120 mm

2 locking pins

-500 piece from stock available 21698 harsefeld

technical data:

maximum load per 3.100 kg pair of traverse

manufacturer: bito type: pro

color of the bars blue

cheaper shipping with several low-cost carriers can.

please ask the freight specifying your postcode and location, as well as the desired quantity.

we offer a comprehensive range of new and used racks and accessories and we can assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.
WE OFFER FOR SALE: PALLET RACK ACCESSORIES USED TIE-BARS MANUFACTURER: BITO YR0IIG SUITABLE FOR THE RACK SYSTEM BITO PRO FRAME 2012 1 TRAVERSE/MAT, ABOUT 3,600 X PT 120 MM 2 LOCKING PINS -500 PIECE FROM STOCK AVAILABLE 21698 HARSEFELD TECHNICAL DATA: MAXIMUM LOAD PER 3.100 KG PAIR OF TRAVERSE MANUFACTURER: BITO TYPE: PRO COLOR OF THE BARS BLUE CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE ASK THE FREIGHT SPECIFYING YOUR POSTCODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND WE CAN ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Ubicación: Land-make donati srl calcio (it), type pvc/r2, mach.no. ntp 700/519, new 2013, elevator belt , material mild steel , belt material plastic , belt width 540mm, belt length 4000mm, with carriers , carrier height 50mm, with side guides /brushes, with motor 1,5 kw, 230/400 volt, floorspace 4,6x1,1 mconveyor beltsconveyor screws > conveyor belts what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DONATI SRL CALCIO (IT), TYPE PVC/R2, MACH.NO. NTP 700/519, NEW 2013, ELEVATOR BELT , MATERIAL MILD STEEL , BELT MATERIAL PLASTIC , BELT WIDTH 540MM, BELT LENGTH 4000MM, WITH CARRIERS , CARRIER HEIGHT 50MM, WITH SIDE GUIDES /BRUSHES, WITH MOTOR 1,5 KW, 230/400 VOLT, FLOORSPACE 4,6X1,1 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-aircooled liquid chiller carrier
with 3 cooling circuits, each one screw compressor.
2 shell& tube evaporators
high efficiency option,winter option up to -20c ambient
freon: r134a
cooling capacity: 1247 kw (360 refr.tons)
filled,tested and ready to go.
very good condition,low hours  AIRCOOLED LIQUID CHILLER CARRIER WITH 3 COOLING CIRCUITS, EACH ONE SCREW COMPRESSOR. 2 SHELL& TUBE EVAPORATORS HIGH EFFICIENCY OPTION,WINTER OPTION UP TO -20C AMBIENT FREON: R134A COOLING CAPACITY: 1247 KW (360 REFR.TONS) FILLED,TESTED AND READY TO GO. VERY GOOD CONDITION,LOW HOURS
Vendedor: I.C.E.
Año de construcción: usado
Ubicación: Land-stop punch, hole punch, eccentric punch, line punch, punch press, punch press<br /><br />-box pipe punch 50 x 30 mm<br />-rundrohr punch<br />-coordinates stop<br />-load 155 mm<br />-div. tool here<br />-punching quick-change system<br />-sides and depth stops<br />-max. punching capacity 36 ton.<br />-2x quick-change tool carrier<br />-weight approx. 2000 kg STOP PUNCH, HOLE PUNCH, ECCENTRIC PUNCH, LINE PUNCH, PUNCH PRESS, PUNCH PRESS

-BOX PIPE PUNCH 50 X 30 MM
-RUNDROHR PUNCH
-COORDINATES STOP
-LOAD 155 MM
-DIV. TOOL HERE
-PUNCHING QUICK-CHANGE SYSTEM
-SIDES AND DEPTH STOPS
-MAX. PUNCHING CAPACITY 36 TON.
-2X QUICK-CHANGE TOOL CARRIER
-WEIGHT APPROX. 2000 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-eligible to participate in all common bread plants
easy cleaning in the spã¼lmaschnine
the tilting planks can be purchased with car
car dimensions: 165/63/40 cm h/w/d:
rocker boards plastic normal signs of use

dimensions: outside dimensions: 58.9 x 38.8 cm
internal dimensions: 56.4 x 36.4 x 4.5 cm height: 4.9 cm  ELIGIBLE TO PARTICIPATE IN ALL COMMON BREAD PLANTS EASY CLEANING IN THE SP&ATILDE;&FRAC14;LMASCHNINE THE TILTING PLANKS CAN BE PURCHASED WITH CAR CAR DIMENSIONS: 165/63/40 CM H/W/D: ROCKER BOARDS PLASTIC NORMAL SIGNS OF USE DIMENSIONS: OUTSIDE DIMENSIONS: 58.9 X 38.8 CM INTERNAL DIMENSIONS: 56.4 X 36.4 X 4.5 CM HEIGHT: 4.9 CM
Vendedor: Güzel Taceddin
Año de construcción: usado
Precio: 1.750 €
Ubicación: Land-radial drilling machine, drilling machine, jib boring machine<br /><br />-transition in actual condition as visited<br />-gearbox of the drill is partially without function<br />-therefore, the machine is sold as a spare parts carrier<br />-unloading 1250 mm<br />-cone socket mk5<br />-motor power 4 kw<br />-speeds 19-1900 rpm<br />-columns Ø 440 mm<br />-spindle stroke 480 mm<br />-threading device<br />-automatic feed 0.07-2.9 mm / rev<br />- cube 800/535 / h500 mm<br />-clamping area 1060 x 920 mm<br />-dimensions 2850/1150 / h3220 mm<br />-weight about 4000 kg RADIAL DRILLING MACHINE, DRILLING MACHINE, JIB BORING MACHINE

-TRANSITION IN ACTUAL CONDITION AS VISITED
-GEARBOX OF THE DRILL IS PARTIALLY WITHOUT FUNCTION
-THEREFORE, THE MACHINE IS SOLD AS A SPARE PARTS CARRIER
-UNLOADING 1250 MM
-CONE SOCKET MK5
-MOTOR POWER 4 KW
-SPEEDS 19-1900 RPM
-COLUMNS Ø 440 MM
-SPINDLE STROKE 480 MM
-THREADING DEVICE
-AUTOMATIC FEED 0.07-2.9 MM / REV
- CUBE 800/535 / H500 MM
-CLAMPING AREA 1060 X 920 MM
-DIMENSIONS 2850/1150 / H3220 MM
-WEIGHT ABOUT 4000 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-with digital display for lateral axis.
clamping surface of the solid table 195 x 605 mm
table movement along autom. and hand 290/300 mm
table motion vertical machine. and hand 330/340 mm
spindle stock cross movement by hand 150 mm
spindle carrier isa 40
spindle speeds of 40-2000 rpm.
spindle drive 1/1.4 kw
weight approx. 660 kg.
accessories: separate control cabinet. WITH DIGITAL DISPLAY FOR LATERAL AXIS. CLAMPING SURFACE OF THE SOLID TABLE 195 X 605 MM TABLE MOVEMENT ALONG AUTOM. AND HAND 290/300 MM TABLE MOTION VERTICAL MACHINE. AND HAND 330/340 MM SPINDLE STOCK CROSS MOVEMENT BY HAND 150 MM SPINDLE CARRIER ISA 40 SPINDLE SPEEDS OF 40-2000 RPM. SPINDLE DRIVE 1/1.4 KW WEIGHT APPROX. 660 KG. ACCESSORIES: SEPARATE CONTROL CABINET.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-capacity: 6000 - 18000  bottles/h      <br />formats:  bottle diameter: 50-98 mm, max. labeldimensions: 140/140 mm, body, shoulder, rear label<br />machine pitch: 182 mm<br />direction:  clockwise rotation<br />operation / control:   vipa cpu 214, auxiliary voltage: 24 v / dc<br />equipment: bottle carriers: 12 pieces, pallete shaft: 5/5 pieces, gripper partition: 4, star partition: 8<br /> CAPACITY: 6000 - 18000 BOTTLES/H
FORMATS: BOTTLE DIAMETER: 50-98 MM, MAX. LABELDIMENSIONS: 140/140 MM, BODY, SHOULDER, REAR LABEL
MACHINE PITCH: 182 MM
DIRECTION: CLOCKWISE ROTATION
OPERATION / CONTROL: VIPA CPU 214, AUXILIARY VOLTAGE: 24 V / DC
EQUIPMENT: BOTTLE CARRIERS: 12 PIECES, PALLETE SHAFT: 5/5 PIECES, GRIPPER PARTITION: 4, STAR PARTITION: 8
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-electronically controlled milling and edges in glue, rework and drilling centre to the commission-wise production of furniture parts,
solid wood or similar materials.
prepared for einwechselbares gluing unit.

base machine:
-bed stable heavy-duty compact linear guide system. preloaded gear rack drives and digital ac servo motors in the x - and y-axes
-unit carrier with linear guiding system,
ball screw and digital ac servo motor to the position of the z axis,
travel 535 mm
 
clamping table at baz211/40/k
-clamping table integrated into the machine bed
  a rigid steel construction with
  linear guides in the longitudinal direction to the
  adjustment of the clamping brackets

power control - control:
  
basic equipment:
-remote diagnostics via modem
  billing according a separate remote service contract
  if completed (not included)
-at baz211/40 + 52
  1 water ring vacuum pump with 100 m3/h
  (corresponds to power a 140 m3/h rotary vane vacuum pump) for clamping system
-pneumatic connection r 1/2 inch, 7 bar
-maximum speed:
-60 m/min in x - and y-direction
-30 m/min in z-direction

technical data:
-workpiece length
maximum 4000 mm for single occupancy
1375 mm pendant occupancy
1550 mm pendant occupancy for milling
with water meters diameter. 25 mm
-width of the work piece stop front: (operating side)
-max 1220 mm for milling tool
  diameter 25 mm
-max 1220 mm with glue
-1150 mm max for all units
-width of the work piece stop rear:
  (auxiliary fence table back)
-1350 mm for machining with tool
  diameter 25 mm
-max 1250 mm with glue
-max 1220 mm for all units
-workpiece thickness
-60 mm with standard clamp in use
  gluing unit
-max 300 mm incl. clamping device in use
  as a router
-up to 60 mm with standard clamp without
  constraint for aggregates and extraction
-in the radius milling min. 16 mm or
  2 x radius + 10 mm
-the specified dimensions are not the maximum possible editing values
  to equate per unit â?? see separate
  tables
-minimum size of the workpiece depending on:
  clamping devices, workpiece surface and contour
-working height bottom workpiece 950 mm
-soil conditions must comply with the foundation plan

7.5 kw liquid-cooled main spindle
-for hsk f63 - din 69893
  
spindle return stroke
-allows the use of the drill head with
  form milling tool in the main spindle
-tool length incl. sleeve
  up to 150 mm
  
c-axis with units - electronic interface
-for mounting of the machining and gluing aggregates with integrated pneumatic electrical electronics supply and actuator programming for cnc drawing

laser positioning aid for vacuum clamp

id: 7313 1 times
extra connectors for clamping devices

id: 7011 1 times
sicherheitsabschrankung side panel left + right

id: 7325 1 times
shuttle machining bxxx/30 /...

id: 7301 2 piece
lateral and longitudinal stop bolt

note
as the auxiliary stops right rear

id: 7207 6 pieces
stroke rail for console table b200

note:
to console 1 to 3 and 5 to 7

number: 1 times
extension boom b200
allows you to edit the width of a workpiece
in attack, rear
-1730 mm max for milling tool diameter 25 mm
-max 1600 mm for all units

id: 7450 1 piece
plate changer 18 x instead of 12 x optimat

id: 7403 1 piece
drill head instead of 17 spindles 12 spindles

id: 7515 1 piece
saw / drill unit swiveling f.wz changer
-unlimited swiveling about c-axis

id: 7547 1 piece
corner notching unit for wz changer
unlimited swiveling on c-axis.

id: 7523 1 piece
drilling / milling unit 4-spindle f. wz-changer
unlimited swiveling on c-axis.

id: 7565 1 piece
blow-off nozzle for wz changer by the edge of the workpiece

id: 7617 1 piece
gluing unit 360-degree optimat

id: 7607 1 piece
heiã?luftdã?se for gluing unit 360 degrees

number: 7633 1 piece
7703 before crosscutting station and 1 x roll number: 1 piece
combi-buendigfraes - after cleaning unit f. wz-w.

id: 7721 2 piece
wpl - radius cutter head

id: 7877 7 times
led position display system console 1300-1600 mm ELECTRONICALLY CONTROLLED MILLING AND EDGES IN GLUE, REWORK AND DRILLING CENTRE TO THE COMMISSION-WISE PRODUCTION OF FURNITURE PARTS, SOLID WOOD OR SIMILAR MATERIALS. PREPARED FOR EINWECHSELBARES GLUING UNIT. BASE MACHINE: -BED STABLE HEAVY-DUTY COMPACT LINEAR GUIDE SYSTEM. PRELOADED GEAR RACK DRIVES AND DIGITAL AC SERVO MOTORS IN THE X - AND Y-AXES -UNIT CARRIER WITH LINEAR GUIDING SYSTEM, BALL SCREW AND DIGITAL AC SERVO MOTOR TO THE POSITION OF THE Z AXIS, TRAVEL 535 MM CLAMPING TABLE AT BAZ211/40/K -CLAMPING TABLE INTEGRATED INTO THE MACHINE BED A RIGID STEEL CONSTRUCTION WITH LINEAR GUIDES IN THE LONGITUDINAL DIRECTION TO THE ADJUSTMENT OF THE CLAMPING BRACKETS POWER CONTROL - CONTROL: BASIC EQUIPMENT: -REMOTE DIAGNOSTICS VIA MODEM BILLING ACCORDING A SEPARATE REMOTE SERVICE CONTRACT IF COMPLETED (NOT INCLUDED) -AT BAZ211/40 + 52 1 WATER RING VACUUM PUMP WITH 100 M3/H (CORRESPONDS TO POWER A 140 M3/H ROTARY VANE VACUUM PUMP) FOR CLAMPING SYSTEM -PNEUMATIC CONNECTION R 1/2 INCH, 7 BAR -MAXIMUM SPEED: -60 M/MIN IN X - AND Y-DIRECTION -30 M/MIN IN Z-DIRECTION TECHNICAL DATA: -WORKPIECE LENGTH MAXIMUM 4000 MM FOR SINGLE OCCUPANCY 1375 MM PENDANT OCCUPANCY 1550 MM PENDANT OCCUPANCY FOR MILLING WITH WATER METERS DIAMETER. 25 MM -WIDTH OF THE WORK PIECE STOP FRONT: (OPERATING SIDE) -MAX 1220 MM FOR MILLING TOOL DIAMETER 25 MM -MAX 1220 MM WITH GLUE -1150 MM MAX FOR ALL UNITS -WIDTH OF THE WORK PIECE STOP REAR: (AUXILIARY FENCE TABLE BACK) -1350 MM FOR MACHINING WITH TOOL DIAMETER 25 MM -MAX 1250 MM WITH GLUE -MAX 1220 MM FOR ALL UNITS -WORKPIECE THICKNESS -60 MM WITH STANDARD CLAMP IN USE GLUING UNIT -MAX 300 MM INCL. CLAMPING DEVICE IN USE AS A ROUTER -UP TO 60 MM WITH STANDARD CLAMP WITHOUT CONSTRAINT FOR AGGREGATES AND EXTRACTION -IN THE RADIUS MILLING MIN. 16 MM OR 2 X RADIUS + 10 MM -THE SPECIFIED DIMENSIONS ARE NOT THE MAXIMUM POSSIBLE EDITING VALUES TO EQUATE PER UNIT &ACIRC;?? SEE SEPARATE TABLES -MINIMUM SIZE OF THE WORKPIECE DEPENDING ON: CLAMPING DEVICES, WORKPIECE SURFACE AND CONTOUR -WORKING HEIGHT BOTTOM WORKPIECE 950 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN 7.5 KW LIQUID-COOLED MAIN SPINDLE -FOR HSK F63 - DIN 69893 SPINDLE RETURN STROKE -ALLOWS THE USE OF THE DRILL HEAD WITH FORM MILLING TOOL IN THE MAIN SPINDLE -TOOL LENGTH INCL. SLEEVE UP TO 150 MM C-AXIS WITH UNITS - ELECTRONIC INTERFACE -FOR MOUNTING OF THE MACHINING AND GLUING AGGREGATES WITH INTEGRATED PNEUMATIC ELECTRICAL ELECTRONICS SUPPLY AND ACTUATOR PROGRAMMING FOR CNC DRAWING LASER POSITIONING AID FOR VACUUM CLAMP ID: 7313 1 TIMES EXTRA CONNECTORS FOR CLAMPING DEVICES ID: 7011 1 TIMES SICHERHEITSABSCHRANKUNG SIDE PANEL LEFT + RIGHT ID: 7325 1 TIMES SHUTTLE MACHINING BXXX/30 /... ID: 7301 2 PIECE LATERAL AND LONGITUDINAL STOP BOLT NOTE AS THE AUXILIARY STOPS RIGHT REAR ID: 7207 6 PIECES STROKE RAIL FOR CONSOLE TABLE B200 NOTE: TO CONSOLE 1 TO 3 AND 5 TO 7 NUMBER: 1 TIMES EXTENSION BOOM B200 ALLOWS YOU TO EDIT THE WIDTH OF A WORKPIECE IN ATTACK, REAR -1730 MM MAX FOR MILLING TOOL DIAMETER 25 MM -MAX 1600 MM FOR ALL UNITS ID: 7450 1 PIECE PLATE CHANGER 18 X INSTEAD OF 12 X OPTIMAT ID: 7403 1 PIECE DRILL HEAD INSTEAD OF 17 SPINDLES 12 SPINDLES ID: 7515 1 PIECE SAW / DRILL UNIT SWIVELING F.WZ CHANGER -UNLIMITED SWIVELING ABOUT C-AXIS ID: 7547 1 PIECE CORNER NOTCHING UNIT FOR WZ CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7523 1 PIECE DRILLING / MILLING UNIT 4-SPINDLE F. WZ-CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7565 1 PIECE BLOW-OFF NOZZLE FOR WZ CHANGER BY THE EDGE OF THE WORKPIECE ID: 7617 1 PIECE GLUING UNIT 360-DEGREE OPTIMAT ID: 7607 1 PIECE HEI&ATILDE;?LUFTD&ATILDE;?SE FOR GLUING UNIT 360 DEGREES NUMBER: 7633 1 PIECE 7703 BEFORE CROSSCUTTING STATION AND 1 X ROLL NUMBER: 1 PIECE COMBI-BUENDIGFRAES - AFTER CLEANING UNIT F. WZ-W. ID: 7721 2 PIECE WPL - RADIUS CUTTER HEAD ID: 7877 7 TIMES LED POSITION DISPLAY SYSTEM CONSOLE 1300-1600 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity: 66000  bottles/h<br />control range: 27000 -72000  bottles/h    <br />weight: 78  t<br />direction:  left-right<br />operation / control:  siemens s5<br />basic construction: 26 calotte feet<br />equipment: total bottle baskets: 22,932, total number of bottle carriers: 468, bottle baskets per carrier: 49, spiral finger slot, finger dispenser, rotary tube injection, 2 label dispensers, automatic sieve dirt discharge,<br /> CAPACITY: 66000 BOTTLES/H
CONTROL RANGE: 27000 -72000 BOTTLES/H
WEIGHT: 78 T
DIRECTION: LEFT-RIGHT
OPERATION / CONTROL: SIEMENS S5
BASIC CONSTRUCTION: 26 CALOTTE FEET
EQUIPMENT: TOTAL BOTTLE BASKETS: 22,932, TOTAL NUMBER OF BOTTLE CARRIERS: 468, BOTTLE BASKETS PER CARRIER: 49, SPIRAL FINGER SLOT, FINGER DISPENSER, ROTARY TUBE INJECTION, 2 LABEL DISPENSERS, AUTOMATIC SIEVE DIRT DISCHARGE,
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 415 €
Ubicación: Land-linde

lagw 365 e

welding machine tig welding machine

technical data:
 
linde lagw 365 e

schweisstrom max 360 a

incl. cable, pressure reducer

tig hose package

weight weighed 435 kg

performance data please take the nameplate

the plant is native to a closure, power connector plug is a 63a, therefore we can not test unfortunately the welding machine, but has been used according to previous owner until closure.

we sell the item as defective, or carrier of part of.

a vat invoice is created for you.

LINDE LAGW 365 E WELDING MACHINE TIG WELDING MACHINE TECHNICAL DATA: LINDE LAGW 365 E SCHWEISSTROM MAX 360 A INCL. CABLE, PRESSURE REDUCER TIG HOSE PACKAGE WEIGHT WEIGHED 435 KG PERFORMANCE DATA PLEASE TAKE THE NAMEPLATE THE PLANT IS NATIVE TO A CLOSURE, POWER CONNECTOR PLUG IS A 63A, THEREFORE WE CAN NOT TEST UNFORTUNATELY THE WELDING MACHINE, BUT HAS BEEN USED ACCORDING TO PREVIOUS OWNER UNTIL CLOSURE. WE SELL THE ITEM AS DEFECTIVE, OR CARRIER OF PART OF. A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-capacity: 50000  bottles/h      <br />formats:  bottle diameter min./max .: 53.0 / 76.5 mm, bottle height min./max .: 135/280 mm<br />operation / control:  siemens s5 and siemens s7<br />equipment: one end machine, accumulator table, material: chassis: stainl. steel, bottle baskets: plastic,334 bottle carriers with 39 bottle cells, bottle cell division: 87 mm<br /> CAPACITY: 50000 BOTTLES/H
FORMATS: BOTTLE DIAMETER MIN./MAX .: 53.0 / 76.5 MM, BOTTLE HEIGHT MIN./MAX .: 135/280 MM
OPERATION / CONTROL: SIEMENS S5 AND SIEMENS S7
EQUIPMENT: ONE END MACHINE, ACCUMULATOR TABLE, MATERIAL: CHASSIS: STAINL. STEEL, BOTTLE BASKETS: PLASTIC,334 BOTTLE CARRIERS WITH 39 BOTTLE CELLS, BOTTLE CELL DIVISION: 87 MM
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-f 45 evodrive
in basic equipment
equipment package 2
-power 5,5 kw (7,5 hp) with three speeds 3/4/5 000 rpm, manual
adjustable
-angle guide fence (wga) with length compensation and digit l
-cnc rip fence, cutting width 1 000 mm
-original holder
advanced cutting height unilateral rotation, only in connection with at least 5.5 kw
(7,5 hp) drive performance
power 5,5 kw (7,5 hp) with vario (infinitely variable speed control, 2 000 -
6 000 rpm), single-sided wheel
3-axis - ritz unit (ra pido plus): with electromotive height, side and
furrow-width adjustment, including blade, ritzer sheet height with programmable
quick reduction and quick increase, blade width display, drive motor
0.75 of kw (1 hp) at 8 200 rpm upgrades only on machines with preparation for
before scoring unit. for single-sided wheel
led lighting: with particularly energy-efficient led technology, it is
danger zone of the scoring marks clearly visible.
double trolleys: the old village double trolley is famous for its
freedom of movement and the precise rotation. hold the large castors
superstructure in connection to the carrier absolutely exactly in the respective
guide rods. the car is easy with little force in motion
bring up and running safely as if on rails. this running quality is even at
maintain decades of pollution and pollution. length 3 200 mm.
on / off switch on the double trolley
cnc angle stop un 90
cnc fence, cutting width 1 300 mm F 45 EVODRIVE IN BASIC EQUIPMENT EQUIPMENT PACKAGE 2 -POWER 5,5 KW (7,5 HP) WITH THREE SPEEDS 3/4/5 000 RPM, MANUAL ADJUSTABLE -ANGLE GUIDE FENCE (WGA) WITH LENGTH COMPENSATION AND DIGIT L -CNC RIP FENCE, CUTTING WIDTH 1 000 MM -ORIGINAL HOLDER ADVANCED CUTTING HEIGHT UNILATERAL ROTATION, ONLY IN CONNECTION WITH AT LEAST 5.5 KW (7,5 HP) DRIVE PERFORMANCE POWER 5,5 KW (7,5 HP) WITH VARIO (INFINITELY VARIABLE SPEED CONTROL, 2 000 - 6 000 RPM), SINGLE-SIDED WHEEL 3-AXIS - RITZ UNIT (RA PIDO PLUS): WITH ELECTROMOTIVE HEIGHT, SIDE AND FURROW-WIDTH ADJUSTMENT, INCLUDING BLADE, RITZER SHEET HEIGHT WITH PROGRAMMABLE QUICK REDUCTION AND QUICK INCREASE, BLADE WIDTH DISPLAY, DRIVE MOTOR 0.75 OF KW (1 HP) AT 8 200 RPM UPGRADES ONLY ON MACHINES WITH PREPARATION FOR BEFORE SCORING UNIT. FOR SINGLE-SIDED WHEEL LED LIGHTING: WITH PARTICULARLY ENERGY-EFFICIENT LED TECHNOLOGY, IT IS DANGER ZONE OF THE SCORING MARKS CLEARLY VISIBLE. DOUBLE TROLLEYS: THE OLD VILLAGE DOUBLE TROLLEY IS FAMOUS FOR ITS FREEDOM OF MOVEMENT AND THE PRECISE ROTATION. HOLD THE LARGE CASTORS SUPERSTRUCTURE IN CONNECTION TO THE CARRIER ABSOLUTELY EXACTLY IN THE RESPECTIVE GUIDE RODS. THE CAR IS EASY WITH LITTLE FORCE IN MOTION BRING UP AND RUNNING SAFELY AS IF ON RAILS. THIS RUNNING QUALITY IS EVEN AT MAINTAIN DECADES OF POLLUTION AND POLLUTION. LENGTH 3 200 MM. ON / OFF SWITCH ON THE DOUBLE TROLLEY CNC ANGLE STOP UN 90 CNC FENCE, CUTTING WIDTH 1 300 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 5.400 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 2700 x 800 x 1300 mm<br/>description: - production number: ahe 1174<br> - operating voltage: 380 v, ~3, 50 hz<br> - total connected load: 1,75 kw<br> -motor speed of main drive spindle: 1500/300 rpm<br> - with control system schenck cab 820<br> - test piece weight: from 10 up to 320 kg<br> - overload capacity at symmetrical loading up to: 400 kg<br> - onderload up to: random<br> - test piece diameter: max. 1260 mm<br> - bearing distance between centre of bearings: max. 2300 mm<br> - bearing pins diameter: 10 - 160 mm<br> - type of bearing: carrier rollers<br> - type of unbalance display : digital<br> - type of layer arrangement: two layers<br> - balancing speed: switchable 600/920/1200/1840 rpm at a diameter of 100 mm<br> - range of gage: approx. 1:500.000 mm<br> - bed length: 2500 mm<br> - drive: belt drive<br> - type of drive: electrical<br> - the machine will be presumably available in june 2019. therefore the pick up has to take place on a date to be agreed.<br> - see video as well as pdf WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 800 X 1300 MM
DESCRIPTION: - PRODUCTION NUMBER: AHE 1174
- OPERATING VOLTAGE: 380 V, ~3, 50 HZ
- TOTAL CONNECTED LOAD: 1,75 KW
-MOTOR SPEED OF MAIN DRIVE SPINDLE: 1500/300 RPM
- WITH CONTROL SYSTEM SCHENCK CAB 820
- TEST PIECE WEIGHT: FROM 10 UP TO 320 KG
- OVERLOAD CAPACITY AT SYMMETRICAL LOADING UP TO: 400 KG
- ONDERLOAD UP TO: RANDOM
- TEST PIECE DIAMETER: MAX. 1260 MM
- BEARING DISTANCE BETWEEN CENTRE OF BEARINGS: MAX. 2300 MM
- BEARING PINS DIAMETER: 10 - 160 MM
- TYPE OF BEARING: CARRIER ROLLERS
- TYPE OF UNBALANCE DISPLAY : DIGITAL
- TYPE OF LAYER ARRANGEMENT: TWO LAYERS
- BALANCING SPEED: SWITCHABLE 600/920/1200/1840 RPM AT A DIAMETER OF 100 MM
- RANGE OF GAGE: APPROX. 1:500.000 MM
- BED LENGTH: 2500 MM
- DRIVE: BELT DRIVE
- TYPE OF DRIVE: ELECTRICAL
- THE MACHINE WILL BE PRESUMABLY AVAILABLE IN JUNE 2019. THEREFORE THE PICK UP HAS TO TAKE PLACE ON A DATE TO BE AGREED.
- SEE VIDEO AS WELL AS PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land-used 2011 caterpillar m318d mobile excavator with bucket, quick coupler, blade, check valves, central greasing and aux. hydraulics. service records are available upon request. equipment details: configuration: weight: 19.4 tons bucket - bucket: no - cylinder: ok quick coupler - type: mechanical - brand / model: morin stick - stick length: 2.5 m - steel condition: ok - welded: ok - fishplated: ok - cylinder: ok - pins & bushings: ok auxiliary hydraulic - number of auxiliary hydraulic lines: 2 boom - boom type: mono - steel condition: ok - welded: ok - fishplated: ok - cracked: ok - cylinder: issue ? boom is dropping very slowly - pins & bushings: ok check valves - check valves boom: yes - check valves stick: yes cab - cab type and a/c: a/c cab tires - configuration: single - type: pneumatic - front left hand outside: issue (20 %) - front right hand outside: issue (20 %) - rear left hand outside: issue (20 %) - rear right hand outside: issue (20 %) wheels - size of tires: 18-19.5 cabin interior - cleanliness: imperfection - seat condition: ok - airconditioning: ok - windows: ok - switches: ok - gauges: ok - cab door: imperfection - wiper: ok - floor mat: ok - structure: ok engine - normal smoke level: ok - normal fluid level: ok - normal engine noises: ok - no engine blow by: imperfection ? minor blow by - belts condition: ok - cooling system: imperfection ? coolant level is low - oil condition: ok - exhaust: ok - no engine leaks: imperfection ? sump gasket is leaking - brand / model: caterpillar c6.6 hydraulics - hydraulic pump: ok - valve block: ok - ring gear: ok - swivel motor: ok carrier - car body condition: ok functional test - pins boom: ok - pins stick: ok - pins bucket: ok - swing drive/brake: ok - boom drift: imperfection - pump noises: ok - slew ring play: ok - electrics: ok - drive train: ok ? good but has oil leak on transmission there is transmission oil.and hydraulic oil leaking from above aswel - batteries: ok hour meter - hour meter reading: 9607 - hour meter verified: ok - verification method: by inspector central lube - brand / model: groeneveld dozer blade - width: 2.55 - condition: ok certifications - ce marked: yes - epa marked: yes

 USED 2011 CATERPILLAR M318D MOBILE EXCAVATOR WITH BUCKET, QUICK COUPLER, BLADE, CHECK VALVES, CENTRAL GREASING AND AUX. HYDRAULICS. SERVICE RECORDS ARE AVAILABLE UPON REQUEST. EQUIPMENT DETAILS: CONFIGURATION: WEIGHT: 19.4 TONS BUCKET - BUCKET: NO - CYLINDER: OK QUICK COUPLER - TYPE: MECHANICAL - BRAND / MODEL: MORIN STICK - STICK LENGTH: 2.5 M - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CYLINDER: OK - PINS & BUSHINGS: OK AUXILIARY HYDRAULIC - NUMBER OF AUXILIARY HYDRAULIC LINES: 2 BOOM - BOOM TYPE: MONO - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CRACKED: OK - CYLINDER: ISSUE ? BOOM IS DROPPING VERY SLOWLY - PINS & BUSHINGS: OK CHECK VALVES - CHECK VALVES BOOM: YES - CHECK VALVES STICK: YES CAB - CAB TYPE AND A/C: A/C CAB TIRES - CONFIGURATION: SINGLE - TYPE: PNEUMATIC - FRONT LEFT HAND OUTSIDE: ISSUE (20 %) - FRONT RIGHT HAND OUTSIDE: ISSUE (20 %) - REAR LEFT HAND OUTSIDE: ISSUE (20 %) - REAR RIGHT HAND OUTSIDE: ISSUE (20 %) WHEELS - SIZE OF TIRES: 18-19.5 CABIN INTERIOR - CLEANLINESS: IMPERFECTION - SEAT CONDITION: OK - AIRCONDITIONING: OK - WINDOWS: OK - SWITCHES: OK - GAUGES: OK - CAB DOOR: IMPERFECTION - WIPER: OK - FLOOR MAT: OK - STRUCTURE: OK ENGINE - NORMAL SMOKE LEVEL: OK - NORMAL FLUID LEVEL: OK - NORMAL ENGINE NOISES: OK - NO ENGINE BLOW BY: IMPERFECTION ? MINOR BLOW BY - BELTS CONDITION: OK - COOLING SYSTEM: IMPERFECTION ? COOLANT LEVEL IS LOW - OIL CONDITION: OK - EXHAUST: OK - NO ENGINE LEAKS: IMPERFECTION ? SUMP GASKET IS LEAKING - BRAND / MODEL: CATERPILLAR C6.6 HYDRAULICS - HYDRAULIC PUMP: OK - VALVE BLOCK: OK - RING GEAR: OK - SWIVEL MOTOR: OK CARRIER - CAR BODY CONDITION: OK FUNCTIONAL TEST - PINS BOOM: OK - PINS STICK: OK - PINS BUCKET: OK - SWING DRIVE/BRAKE: OK - BOOM DRIFT: IMPERFECTION - PUMP NOISES: OK - SLEW RING PLAY: OK - ELECTRICS: OK - DRIVE TRAIN: OK ? GOOD BUT HAS OIL LEAK ON TRANSMISSION THERE IS TRANSMISSION OIL.AND HYDRAULIC OIL LEAKING FROM ABOVE ASWEL - BATTERIES: OK HOUR METER - HOUR METER READING: 9607 - HOUR METER VERIFIED: OK - VERIFICATION METHOD: BY INSPECTOR CENTRAL LUBE - BRAND / MODEL: GROENEVELD DOZER BLADE - WIDTH: 2.55 - CONDITION: OK CERTIFICATIONS - CE MARKED: YES - EPA MARKED: YES
Vendedor: Machinery World LTD
Año de construcción: usado
Ubicación: Land-make unknown, new unknown, rotating drum dryer /drum cooler (1x), continuous , material stainless steel , drum sizes dia. 800x6000mm, product inlet dia. 220mm, outlet dia. 330mm, without motor , with carriers in drum , mounted on frame , floorspace 8,0x1,2 m, total height 1,6 m, extra specifications - closed drum, outside can be cooled through spraying pipesrotating drum dryersdryers > rotating drum dryers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, NEW UNKNOWN, ROTATING DRUM DRYER /DRUM COOLER (1X), CONTINUOUS , MATERIAL STAINLESS STEEL , DRUM SIZES DIA. 800X6000MM, PRODUCT INLET DIA. 220MM, OUTLET DIA. 330MM, WITHOUT MOTOR , WITH CARRIERS IN DRUM , MOUNTED ON FRAME , FLOORSPACE 8,0X1,2 M, TOTAL HEIGHT 1,6 M, EXTRA SPECIFICATIONS - CLOSED DRUM, OUTSIDE CAN BE COOLED THROUGH SPRAYING PIPESROTATING DRUM DRYERSDRYERS > ROTATING DRUM DRYERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-2010 terex tc125

make & model	terex tc125
year 	2010
running hours	1932
load capacity	---
type	tracked excavator
condition	used

equipment details: configuration: serial number: tc01250490 weight: 12.8 tons bucket - bucket: no - cylinder: ok quick coupler - type: hydraulic - brand / model: lehnhoff swe ms08 stick - stick length: 2 m - steel condition: ok - welded: ok - fishplated: ok - cylinder: ok - pins & bushings: imperfection ? medium play auxiliary hydraulic - number of auxiliary hydraulic lines: unit equipped with two aux. hydraulic lines boom - boom type: swingaway boom - steel condition: ok - welded: ok - fishplated: ok - cracked: ok - cylinder: imperfection ? boom cylinder drifting down slowly. it needs to be checked for internal leaks - pins & bushings: imperfection ? medium play cab - cab type and a/c: cab pads - pads type: rubber inserts - pad width: 500 mm overall - overall condition: ok ? the machine is in general good condition. some smaller repairs and replacements recommended. the park brake lever does not engage cabin interior - cleanliness: ok - seat condition: ok - switches: ok - gauges: ok - cab door: imperfection ? inside plastic cover is cracked - wiper: ok - floor mat: ok - structure: ok engine - normal smoke level: ok - normal fluid level: ok - normal engine noises: ok - no engine blow by: ok - belts condition: ok - cooling system: ok - oil condition: ok - exhaust: ok - no engine leaks: ok - brand / model: deutz tcd2012l04-2v - engine serial number: 10862363 hydraulics - hydraulic pump: ok - valve block: ok - ring gear: ok - swivel motor: ok undercarriage - pads: issue (0 %) ? rubber pads worn - idler: ok (70 %) - top roller: ok (70 %) - bottom roller: ok (70 %) - sprocket: ok (60 %) track structure - track motor condition: ok - track frame condition: ok carrier - car body condition: ok functional test - pins boom: imperfection ? medium play - pins stick: imperfection ? medium play - pins bucket: imperfection ? medium play - swing drive/brake: ok - slew ring play: ok - electrics: ok - drive train: ok hour meter - hour meter reading: 1932 - hour meter verified: ok - verification method: with system readout certifications - ce marked: yes - epa marked: yes

 2010 TEREX TC125 MAKE & MODEL TEREX TC125 YEAR 2010 RUNNING HOURS 1932 LOAD CAPACITY --- TYPE TRACKED EXCAVATOR CONDITION USED EQUIPMENT DETAILS: CONFIGURATION: SERIAL NUMBER: TC01250490 WEIGHT: 12.8 TONS BUCKET - BUCKET: NO - CYLINDER: OK QUICK COUPLER - TYPE: HYDRAULIC - BRAND / MODEL: LEHNHOFF SWE MS08 STICK - STICK LENGTH: 2 M - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CYLINDER: OK - PINS & BUSHINGS: IMPERFECTION ? MEDIUM PLAY AUXILIARY HYDRAULIC - NUMBER OF AUXILIARY HYDRAULIC LINES: UNIT EQUIPPED WITH TWO AUX. HYDRAULIC LINES BOOM - BOOM TYPE: SWINGAWAY BOOM - STEEL CONDITION: OK - WELDED: OK - FISHPLATED: OK - CRACKED: OK - CYLINDER: IMPERFECTION ? BOOM CYLINDER DRIFTING DOWN SLOWLY. IT NEEDS TO BE CHECKED FOR INTERNAL LEAKS - PINS & BUSHINGS: IMPERFECTION ? MEDIUM PLAY CAB - CAB TYPE AND A/C: CAB PADS - PADS TYPE: RUBBER INSERTS - PAD WIDTH: 500 MM OVERALL - OVERALL CONDITION: OK ? THE MACHINE IS IN GENERAL GOOD CONDITION. SOME SMALLER REPAIRS AND REPLACEMENTS RECOMMENDED. THE PARK BRAKE LEVER DOES NOT ENGAGE CABIN INTERIOR - CLEANLINESS: OK - SEAT CONDITION: OK - SWITCHES: OK - GAUGES: OK - CAB DOOR: IMPERFECTION ? INSIDE PLASTIC COVER IS CRACKED - WIPER: OK - FLOOR MAT: OK - STRUCTURE: OK ENGINE - NORMAL SMOKE LEVEL: OK - NORMAL FLUID LEVEL: OK - NORMAL ENGINE NOISES: OK - NO ENGINE BLOW BY: OK - BELTS CONDITION: OK - COOLING SYSTEM: OK - OIL CONDITION: OK - EXHAUST: OK - NO ENGINE LEAKS: OK - BRAND / MODEL: DEUTZ TCD2012L04-2V - ENGINE SERIAL NUMBER: 10862363 HYDRAULICS - HYDRAULIC PUMP: OK - VALVE BLOCK: OK - RING GEAR: OK - SWIVEL MOTOR: OK UNDERCARRIAGE - PADS: ISSUE (0 %) ? RUBBER PADS WORN - IDLER: OK (70 %) - TOP ROLLER: OK (70 %) - BOTTOM ROLLER: OK (70 %) - SPROCKET: OK (60 %) TRACK STRUCTURE - TRACK MOTOR CONDITION: OK - TRACK FRAME CONDITION: OK CARRIER - CAR BODY CONDITION: OK FUNCTIONAL TEST - PINS BOOM: IMPERFECTION ? MEDIUM PLAY - PINS STICK: IMPERFECTION ? MEDIUM PLAY - PINS BUCKET: IMPERFECTION ? MEDIUM PLAY - SWING DRIVE/BRAKE: OK - SLEW RING PLAY: OK - ELECTRICS: OK - DRIVE TRAIN: OK HOUR METER - HOUR METER READING: 1932 - HOUR METER VERIFIED: OK - VERIFICATION METHOD: WITH SYSTEM READOUT CERTIFICATIONS - CE MARKED: YES - EPA MARKED: YES
Vendedor: Machinery World LTD
Año de construcción: usado
Precio: used machinery auction RESALE 4.500 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 8700 x 7700 x 4000 mm<br/>description: igm rt 330.1 robot welding cell<br> <br> 2-station system with 2 turning devices with 2-4 m clamping length, incl. welding source<br> <br> in addition, a similar igm welding cell built in 1999, however incomplete, will be sold as spare part carrier only, at no extra charge<br> WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 8700 X 7700 X 4000 MM
DESCRIPTION: IGM RT 330.1 ROBOT WELDING CELL

2-STATION SYSTEM WITH 2 TURNING DEVICES WITH 2-4 M CLAMPING LENGTH, INCL. WELDING SOURCE

IN ADDITION, A SIMILAR IGM WELDING CELL BUILT IN 1999, HOWEVER INCOMPLETE, WILL BE SOLD AS SPARE PART CARRIER ONLY, AT NO EXTRA CHARGE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gas turbine
manufacturer: bbc
setting into operation: 10/1974
hours of operation: 2733
normal startup: approx. 2800 (2742-13.09.2011)
quickstart: approx. 19
turbinenein - and outlet temperature: 13.0 445,0 gas amount: 3800 m â³/h
gas pressure: 13.8 bar
water injection: 6.6 m â³/h
water pressure: 50 bar
generator gas turbine
performance: 63.7 mw / 3000 rpm
power: 3515 a
voltage: 10.7 k.
revisions per year by the the company alstom power service gmbh until november 2012 detectable.
repair bucket damage 16.06.2009 amounting to â?¬5.368.239,24
implementation a - inspection 2012 amounting to â?¬18.147,50
shovel carrier
gt levels: 3,4,5
new delivery turbine running series: 2
repair heating housing / u: 09/2011
 GAS TURBINE MANUFACTURER: BBC SETTING INTO OPERATION: 10/1974 HOURS OF OPERATION: 2733 NORMAL STARTUP: APPROX. 2800 (2742-13.09.2011) QUICKSTART: APPROX. 19 TURBINENEIN - AND OUTLET TEMPERATURE: 13.0 445,0 GAS AMOUNT: 3800 M &ACIRC;&SUP3;/H GAS PRESSURE: 13.8 BAR WATER INJECTION: 6.6 M &ACIRC;&SUP3;/H WATER PRESSURE: 50 BAR GENERATOR GAS TURBINE PERFORMANCE: 63.7 MW / 3000 RPM POWER: 3515 A VOLTAGE: 10.7 K. REVISIONS PER YEAR BY THE THE COMPANY ALSTOM POWER SERVICE GMBH UNTIL NOVEMBER 2012 DETECTABLE. REPAIR BUCKET DAMAGE 16.06.2009 AMOUNTING TO &ACIRC;?&NOT;5.368.239,24 IMPLEMENTATION A - INSPECTION 2012 AMOUNTING TO &ACIRC;?&NOT;18.147,50 SHOVEL CARRIER GT LEVELS: 3,4,5 NEW DELIVERY TURBINE RUNNING SERIES: 2 REPAIR HEATING HOUSING / U: 09/2011
Vendedor: Christoph Sattler
Año de construcción: usado
Ubicación: Land-pressure:230 t<br/>chamfer lenght:4050 mm<br/>distance between columns:3550 mm<br/>slide stroke:250 mm<br/>throat:305 mm<br/>distance table/ram:min. 250 - max. 500 mm<br/>stroke speed - idle:max. 140 mm/sec.<br/>pressing speed:max. 9 mm/sec.<br/>storke speed - withdrawal:max. 140 mm/sec.<br/>total power requirement:18,5 kw<br/>safety distance:min. 108 mm<br/>slowing-down time:44 ms<br/>tracking travel:4 mm<br/>oil volume:250 l<br/>weight of the machine ca.:16,5 t<br/>dimensions of the machine ca.:6200 x 3290 x 2800 mm<br/><br/>pressure in the hydraulic system: max. 280 bar pressure in the pneumatic system: 6 +/- 1 bar operating voltage: 3x 400v / pe / 50 hz rated current of main fuse: max. 63 a connection cable: 25.5 kva  - only 2085 operating hours !! - without tools! - lasersafe / lazersafe can be used up to max. upper die height 440 mm. - documentation - backgauge cnc controlled x and r axis with freely programmable and thus infinitely adjustable stop depth and height for high accuracy - upper tool clamping 26mm, manual - lower tool clamping 13mm, manual - crowning cnc in the table  stop system x / r: - rear stop (stop carrier adjustment) stroke area x axis (from bend line): 5-1000 mm adjustment speed x-axis: max. 500 mm / sec. drive power x-axis: 1.0 kw - height adjustment (adjustment via servomotor r-axis) adjustment range r-axis (from table surface): 25-175 mm plant speed r axis: max. 150 mm / sec. drive power r-axis: 1.0 kw PRESSURE:230 T
CHAMFER LENGHT:4050 MM
DISTANCE BETWEEN COLUMNS:3550 MM
SLIDE STROKE:250 MM
THROAT:305 MM
DISTANCE TABLE/RAM:MIN. 250 - MAX. 500 MM
STROKE SPEED - IDLE:MAX. 140 MM/SEC.
PRESSING SPEED:MAX. 9 MM/SEC.
STORKE SPEED - WITHDRAWAL:MAX. 140 MM/SEC.
TOTAL POWER REQUIREMENT:18,5 KW
SAFETY DISTANCE:MIN. 108 MM
SLOWING-DOWN TIME:44 MS
TRACKING TRAVEL:4 MM
OIL VOLUME:250 L
WEIGHT OF THE MACHINE CA.:16,5 T
DIMENSIONS OF THE MACHINE CA.:6200 X 3290 X 2800 MM

PRESSURE IN THE HYDRAULIC SYSTEM: MAX. 280 BAR PRESSURE IN THE PNEUMATIC SYSTEM: 6 +/- 1 BAR OPERATING VOLTAGE: 3X 400V / PE / 50 HZ RATED CURRENT OF MAIN FUSE: MAX. 63 A CONNECTION CABLE: 25.5 KVA - ONLY 2085 OPERATING HOURS !! - WITHOUT TOOLS! - LASERSAFE / LAZERSAFE CAN BE USED UP TO MAX. UPPER DIE HEIGHT 440 MM. - DOCUMENTATION - BACKGAUGE CNC CONTROLLED X AND R AXIS WITH FREELY PROGRAMMABLE AND THUS INFINITELY ADJUSTABLE STOP DEPTH AND HEIGHT FOR HIGH ACCURACY - UPPER TOOL CLAMPING 26MM, MANUAL - LOWER TOOL CLAMPING 13MM, MANUAL - CROWNING CNC IN THE TABLE STOP SYSTEM X / R: - REAR STOP (STOP CARRIER ADJUSTMENT) STROKE AREA X AXIS (FROM BEND LINE): 5-1000 MM ADJUSTMENT SPEED X-AXIS: MAX. 500 MM / SEC. DRIVE POWER X-AXIS: 1.0 KW - HEIGHT ADJUSTMENT (ADJUSTMENT VIA SERVOMOTOR R-AXIS) ADJUSTMENT RANGE R-AXIS (FROM TABLE SURFACE): 25-175 MM PLANT SPEED R AXIS: MAX. 150 MM / SEC. DRIVE POWER R-AXIS: 1.0 KW
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-hã?berle

type 90 s h

metal cold-cutting circular saws

technical data:
 
halim h 90 s

maximum blade diameter 275 mm

motor with 2 speeds

edition role on the side

weight 235 kg

the cold saw is here as faulty, or auctioned carrier of part of, because the vice for the material is missing, run the saw works great.

a vat invoice is created for you. H&ATILDE;?BERLE TYPE 90 S H METAL COLD-CUTTING CIRCULAR SAWS TECHNICAL DATA: HALIM H 90 S MAXIMUM BLADE DIAMETER 275 MM MOTOR WITH 2 SPEEDS EDITION ROLE ON THE SIDE WEIGHT 235 KG THE COLD SAW IS HERE AS FAULTY, OR AUCTIONED CARRIER OF PART OF, BECAUSE THE VICE FOR THE MATERIAL IS MISSING, RUN THE SAW WORKS GREAT. A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-overview technical data paper sorting line <br/>manufacturer bollegraaf<br/>year of construction 1999<br/>throughput rate 3 up to 6 tons/h, depending on material<br/>installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h)<br/>sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts<br/><br/>1 piece feeding belt to the sorting line hbt 600-800 * 14.006 mm ? 30°<br/>1 piece sorting belt hbgt 800 * 15,000 mm ? 10° -0°<br/>4 pieces bunker belts hbt 800 /1,000 * 10,940 mm<br/><br/>comments: the sorting line was used for sorting paper fractions, but can also be used for various other sorting operations. the machines are in good condition and can be inspected at our warehouse.  further pictures and technical drawings are available on request.<br/> <br/>detailed information to the individual machines. <br/>technical data sorting cabin <br/>manufacturer bollegraaf<br/>equipment features 4 sorting places, 6 disposal chutes, 4 bunker belts<br/>assembly dimensions 6,500 x 4,900 x 3,150 mm (l x w x h)<br/>assembly area 72 m²<br/>construction modular construction with two doors and two rows of windows <br/>wall type sepalux 0-70-sp<br/>wall thickness 70 mm<br/>modul width 1,200 mm<br/> <br/>technical data feeding conveyor to the sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbt 600-800 * 14,006 mm 30°<br/>year of construction 1999<br/>driving motor 1,5 kw<br/>belt speed 1,5 up to 5,5 m/min. frequency-controlled<br/>length feeding conveyor 5,223 mm<br/>length elevating conveyor 8,783 mm<br/>grade 30°<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 800 mm<br/>spacing / hight of carrier 800 mm / 50 mm<br/> <br/>technical data sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbgt 800 * 15,000 mm  10° / 0°<br/>year of construction 1999<br/>driving motor 5,5 kw<br/>belt speed 12 up to 44 m/min.  frequency-controlled<br/>length sorting conveyor 15,000 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall sorting conv. 150 mm<br/> <br/>technical data bunker belts, 4 pieces <br/>manufacturer bollegraaf <br/>type hbt 800 /1,000 * 10,940 mm<br/>year of construction 1999<br/>driving motor 0,22 up to 0,9 kw<br/>belt speed 1 up to 4 m/min.  frequency-controlled<br/>length bunker conveyor 10,940 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 2,000 mm OVERVIEW TECHNICAL DATA PAPER SORTING LINE
MANUFACTURER BOLLEGRAAF
YEAR OF CONSTRUCTION 1999
THROUGHPUT RATE 3 UP TO 6 TONS/H, DEPENDING ON MATERIAL
INSTALLATION DIMENSIONS 10,000 X 19,000 X 8,000 MM (L X W X H)
SORTING CABIN 6,500 X 4,900 X 3,150 MM (L X W X H), 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS

1 PIECE FEEDING BELT TO THE SORTING LINE HBT 600-800 * 14.006 MM ? 30°
1 PIECE SORTING BELT HBGT 800 * 15,000 MM ? 10° -0°
4 PIECES BUNKER BELTS HBT 800 /1,000 * 10,940 MM

COMMENTS: THE SORTING LINE WAS USED FOR SORTING PAPER FRACTIONS, BUT CAN ALSO BE USED FOR VARIOUS OTHER SORTING OPERATIONS. THE MACHINES ARE IN GOOD CONDITION AND CAN BE INSPECTED AT OUR WAREHOUSE. FURTHER PICTURES AND TECHNICAL DRAWINGS ARE AVAILABLE ON REQUEST.

DETAILED INFORMATION TO THE INDIVIDUAL MACHINES.
TECHNICAL DATA SORTING CABIN
MANUFACTURER BOLLEGRAAF
EQUIPMENT FEATURES 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS
ASSEMBLY DIMENSIONS 6,500 X 4,900 X 3,150 MM (L X W X H)
ASSEMBLY AREA 72 M²
CONSTRUCTION MODULAR CONSTRUCTION WITH TWO DOORS AND TWO ROWS OF WINDOWS
WALL TYPE SEPALUX 0-70-SP
WALL THICKNESS 70 MM
MODUL WIDTH 1,200 MM

TECHNICAL DATA FEEDING CONVEYOR TO THE SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBT 600-800 * 14,006 MM 30°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 1,5 KW
BELT SPEED 1,5 UP TO 5,5 M/MIN. FREQUENCY-CONTROLLED
LENGTH FEEDING CONVEYOR 5,223 MM
LENGTH ELEVATING CONVEYOR 8,783 MM
GRADE 30°
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
SPACING / HIGHT OF CARRIER 800 MM / 50 MM

TECHNICAL DATA SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBGT 800 * 15,000 MM 10° / 0°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 5,5 KW
BELT SPEED 12 UP TO 44 M/MIN. FREQUENCY-CONTROLLED
LENGTH SORTING CONVEYOR 15,000 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL SORTING CONV. 150 MM

TECHNICAL DATA BUNKER BELTS, 4 PIECES
MANUFACTURER BOLLEGRAAF
TYPE HBT 800 /1,000 * 10,940 MM
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 0,22 UP TO 0,9 KW
BELT SPEED 1 UP TO 4 M/MIN. FREQUENCY-CONTROLLED
LENGTH BUNKER CONVEYOR 10,940 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 2,000 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-technical data:

-operating hours approx.					5472 h
-capacity approx.						2500 kg
-lifting height up to approx.				3450 mm - fork length approx.		       			1200 mm
-fork carrier width approx.					1150 mm
	-space required with forks approx.	      	b l 1200 x 3800 mm
	-baubhã¶he approx.						2350 mm
	-weight approx.						3420 kg
-swing seat with safety harness - windshield wiper
-lighting
 TECHNICAL DATA: -OPERATING HOURS APPROX. 5472 H -CAPACITY APPROX. 2500 KG -LIFTING HEIGHT UP TO APPROX. 3450 MM - FORK LENGTH APPROX. 1200 MM -FORK CARRIER WIDTH APPROX. 1150 MM -SPACE REQUIRED WITH FORKS APPROX. B L 1200 X 3800 MM -BAUBH&ATILDE;&PARA;HE APPROX. 2350 MM -WEIGHT APPROX. 3420 KG -SWING SEAT WITH SAFETY HARNESS - WINDSHIELD WIPER -LIGHTING
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 4.100 €
Ubicación: Land-weight approx.: 8000 kg<br/>dimensions (l x w x h) approx.: 3600 x 2720 x 4000 mm<br/>description: load<br> 3000 kg at lsp 550 up to a lifting height of h3 5500 mmt<br> 2500 kg at lsp 550 up to a lifting height of h3 6800 mmt<br> 2240 kg at lsp 550 up to a lifting height of h3 7100 mmt<br> lifting platform 2-step lifting platform<br> retracted height h1 4463 mm<br> free lift h2 560 mm<br> lifting height h3 7100 mm<br> extended height h4 7915 mm<br> fork carrier height vh 815 mm<br> device dimensions<br> total length 3500 mm<br> frame length 3280 mm<br> working width 1100 mm<br> frame width 1930 mm<br> mast feed 1250 mm<br> radar arm height 1340 mm<br> ground clearance 75 mm<br> turning radius 1995 mm<br> cabin<br> <b>empty weight without battery 6785 kg</b><br> drive power 2x2 3.5 kw<br> working aisle width ast 2505 mm including 150 mm load-side min. distance per side<br> working aisle width ast 2505 mm including 425 mm back-load min. distance per side<br> WEIGHT APPROX.: 8000 KG
DIMENSIONS (L X W X H) APPROX.: 3600 X 2720 X 4000 MM
DESCRIPTION: LOAD
3000 KG AT LSP 550 UP TO A LIFTING HEIGHT OF H3 5500 MMT
2500 KG AT LSP 550 UP TO A LIFTING HEIGHT OF H3 6800 MMT
2240 KG AT LSP 550 UP TO A LIFTING HEIGHT OF H3 7100 MMT
LIFTING PLATFORM 2-STEP LIFTING PLATFORM
RETRACTED HEIGHT H1 4463 MM
FREE LIFT H2 560 MM
LIFTING HEIGHT H3 7100 MM
EXTENDED HEIGHT H4 7915 MM
FORK CARRIER HEIGHT VH 815 MM
DEVICE DIMENSIONS
TOTAL LENGTH 3500 MM
FRAME LENGTH 3280 MM
WORKING WIDTH 1100 MM
FRAME WIDTH 1930 MM
MAST FEED 1250 MM
RADAR ARM HEIGHT 1340 MM
GROUND CLEARANCE 75 MM
TURNING RADIUS 1995 MM
CABIN
EMPTY WEIGHT WITHOUT BATTERY 6785 KG
DRIVE POWER 2X2 3.5 KW
WORKING AISLE WIDTH AST 2505 MM INCLUDING 150 MM LOAD-SIDE MIN. DISTANCE PER SIDE
WORKING AISLE WIDTH AST 2505 MM INCLUDING 425 MM BACK-LOAD MIN. DISTANCE PER SIDE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, by prior agreement the possibility of testing. 2-spindle-6 "lining (165 mm) 2 revolver heads v1 2 workpiece loader intercept station 2 workpiece carrier pneumotec 18-position chuck osp-u 100 l tax system" THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING. 2-SPINDLE-6 "LINING (165 MM) 2 REVOLVER HEADS V1 2 WORKPIECE LOADER INTERCEPT STATION 2 WORKPIECE CARRIER PNEUMOTEC 18-POSITION CHUCK OSP-U 100 L TAX SYSTEM"
Vendedor: CEE-Machines
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 9500 kg<br/>dimensions (l x w x h) approx.: 3700 x 1800 x 2100 mm<br/>description: cnc control siemens 840 d<br> max. swing diameter 520 mm<br> max. swing diameter over cross slide guide 315 mm<br> max. turning diameter left slide 354 mm<br> max. turning diameter right slide 328 mm<br> max. turning length 880 mm<br> slide paths, programmable x/u/z/w 163 / 300 / 375 / 500 mm<br> max. workpiece workpiece mass between the centers 400 kg<br> max. workpiece mass in chuck 60 kg<br> spindle bore 85 mm<br> main drive motor rated output 100% duty cycle 37 kw<br> spindle speed range 10 ­ 4000 rotations/min<br> tool carrier sauter with 12 tool holders<br> traverse speed of the tailstock 5 m /min<br> machine weight 9.5 t<br> WEIGHT APPROX.: 9500 KG
DIMENSIONS (L X W X H) APPROX.: 3700 X 1800 X 2100 MM
DESCRIPTION: CNC CONTROL SIEMENS 840 D
MAX. SWING DIAMETER 520 MM
MAX. SWING DIAMETER OVER CROSS SLIDE GUIDE 315 MM
MAX. TURNING DIAMETER LEFT SLIDE 354 MM
MAX. TURNING DIAMETER RIGHT SLIDE 328 MM
MAX. TURNING LENGTH 880 MM
SLIDE PATHS, PROGRAMMABLE X/U/Z/W 163 / 300 / 375 / 500 MM
MAX. WORKPIECE WORKPIECE MASS BETWEEN THE CENTERS 400 KG
MAX. WORKPIECE MASS IN CHUCK 60 KG
SPINDLE BORE 85 MM
MAIN DRIVE MOTOR RATED OUTPUT 100% DUTY CYCLE 37 KW
SPINDLE SPEED RANGE 10 ­ 4000 ROTATIONS/MIN
TOOL CARRIER SAUTER WITH 12 TOOL HOLDERS
TRAVERSE SPEED OF THE TAILSTOCK 5 M /MIN
MACHINE WEIGHT 9.5 T
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: monforts
model: dnc 500 dt
year of manufacture: 2007
control: siemens 840 d - powerline
chuck diameter [mm]: 260 spindle:
technology: spindle with direct drive each work room
speed: 4,000 rpm
: kw 33.6
torque: 508 nm
clamping device: 3 - jaw chuck, type rota nco 260

tool carrier (x/z):
technology: star revolver with 12 stations per work area
tool holder: vdi40
driven tools: 4,000 rpm, 12,6 kw, 36 nm
left work space: additional y-axis

general:
travel in x/z: 260/600 mm
rapid traverse in x/z: 20/20 m / min automation:
technology: round clock stack magazine with gantry loader
rundtaktstapelmagain: 14 stations for raw and finished parts ã¸32 200 mm
pile weight (max.): 30 kg
bela de weight (max.): 600 kg

equipment / accessories:
chip management: slat conveyors
refrigerant management: internal cooling system with paper band filter
tool breakage monitoring: artis, type ctm
oil and emulsion mist extraction: mechanical separator, fabr. w + w MANUFACTURER: MONFORTS MODEL: DNC 500 DT YEAR OF MANUFACTURE: 2007 CONTROL: SIEMENS 840 D - POWERLINE CHUCK DIAMETER [MM]: 260 SPINDLE: TECHNOLOGY: SPINDLE WITH DIRECT DRIVE EACH WORK ROOM SPEED: 4,000 RPM : KW 33.6 TORQUE: 508 NM CLAMPING DEVICE: 3 - JAW CHUCK, TYPE ROTA NCO 260 TOOL CARRIER (X/Z): TECHNOLOGY: STAR REVOLVER WITH 12 STATIONS PER WORK AREA TOOL HOLDER: VDI40 DRIVEN TOOLS: 4,000 RPM, 12,6 KW, 36 NM LEFT WORK SPACE: ADDITIONAL Y-AXIS GENERAL: TRAVEL IN X/Z: 260/600 MM RAPID TRAVERSE IN X/Z: 20/20 M / MIN AUTOMATION: TECHNOLOGY: ROUND CLOCK STACK MAGAZINE WITH GANTRY LOADER RUNDTAKTSTAPELMAGAIN: 14 STATIONS FOR RAW AND FINISHED PARTS &ATILDE;&CEDIL;32 200 MM PILE WEIGHT (MAX.): 30 KG BELA DE WEIGHT (MAX.): 600 KG EQUIPMENT / ACCESSORIES: CHIP MANAGEMENT: SLAT CONVEYORS REFRIGERANT MANAGEMENT: INTERNAL COOLING SYSTEM WITH PAPER BAND FILTER TOOL BREAKAGE MONITORING: ARTIS, TYPE CTM OIL AND EMULSION MIST EXTRACTION: MECHANICAL SEPARATOR, FABR. W + W
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 34.000 €
Ubicación: Land-weight approx.: 18500 kg<br/>dimensions (l x w x h) approx.: 8000 x 4000 x 3200 mm<br/>description: cnc control siemens 840 d<br> technical data<br> max. turning diameter 610 mm<br> max. turning length 1850 mm<br> travel y-axis (slide 1) 210 mm<br> travel b-axis (slide 1) 240 mm<br> cross path (slide 1/slide 2) 605/267 mm<br> longitudinal path (slide 1/slide 2) 1470/1440 mm<br> longitudinal path (slide 3) 1490 mm<br> spindle bore 118 mm<br> tool spindle speed 4000 1/min<br> speed range stepless 20 - 3.200 rpm.<br> torque at the spindle 650/1080 nm<br> speed range c-axis 3200 rpm<br> rapid traverse (slide 1) 46/24 n/min.<br> rapid traverse (slide 2) 24/60 m/min<br> total power requirement 130/180 kw<br> weight approx. 18.5 t<br> space requirement lt aw card (lx wx h) 8000 x 4000 x 3200 mm<br> <br> equipment<br> main and counter spindle as integrated spindle motor<br> differential clamping pressure for main and counter spindle<br> drive power each 69 kw (56 - 40% duty cycle)<br> separate speed limitation unit for power chuck<br> tool magazine 40-fold (permitted expansion of tool magazine by a second chain with further 40 places)<br> three-jaw power chuck with bore and jaw quick-changing system fnc 250-72  forkardt, incl. attachment parts for main spindle<br> holder for counter spindle<br> spindle flange with mks (holder and revolving tailstock center<br> in-process probe marposs<br> blower air controllable alternative to the coolant<br> double clamping cylinder<br> the adjustable setting force of the counter spindle for the tailstock operation is made with the programming function 11 traversing to a fixed stop<br> measuring cycles: there is the possibility of measuring with probes at the c-axis.<br> the 5-axis-simultaneous movement programs the axes: x, y, z, c and b.<br> 4-path bed - roller guides<br> kuehlmittelspritzpistole<br> compact filter system lnterlit<br> additional coolant pump 80 bar, for upper tool carrier<br> chip conveyor<br> ethernet interface<br> WEIGHT APPROX.: 18500 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 4000 X 3200 MM
DESCRIPTION: CNC CONTROL SIEMENS 840 D
TECHNICAL DATA
MAX. TURNING DIAMETER 610 MM
MAX. TURNING LENGTH 1850 MM
TRAVEL Y-AXIS (SLIDE 1) 210 MM
TRAVEL B-AXIS (SLIDE 1) 240 MM
CROSS PATH (SLIDE 1/SLIDE 2) 605/267 MM
LONGITUDINAL PATH (SLIDE 1/SLIDE 2) 1470/1440 MM
LONGITUDINAL PATH (SLIDE 3) 1490 MM
SPINDLE BORE 118 MM
TOOL SPINDLE SPEED 4000 1/MIN
SPEED RANGE STEPLESS 20 - 3.200 RPM.
TORQUE AT THE SPINDLE 650/1080 NM
SPEED RANGE C-AXIS 3200 RPM
RAPID TRAVERSE (SLIDE 1) 46/24 N/MIN.
RAPID TRAVERSE (SLIDE 2) 24/60 M/MIN
TOTAL POWER REQUIREMENT 130/180 KW
WEIGHT APPROX. 18.5 T
SPACE REQUIREMENT LT AW CARD (LX WX H) 8000 X 4000 X 3200 MM

EQUIPMENT
MAIN AND COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR
DIFFERENTIAL CLAMPING PRESSURE FOR MAIN AND COUNTER SPINDLE
DRIVE POWER EACH 69 KW (56 - 40% DUTY CYCLE)
SEPARATE SPEED LIMITATION UNIT FOR POWER CHUCK
TOOL MAGAZINE 40-FOLD (PERMITTED EXPANSION OF TOOL MAGAZINE BY A SECOND CHAIN WITH FURTHER 40 PLACES)
THREE-JAW POWER CHUCK WITH BORE AND JAW QUICK-CHANGING SYSTEM FNC 250-72 FORKARDT, INCL. ATTACHMENT PARTS FOR MAIN SPINDLE
HOLDER FOR COUNTER SPINDLE
SPINDLE FLANGE WITH MKS (HOLDER AND REVOLVING TAILSTOCK CENTER
IN-PROCESS PROBE MARPOSS
BLOWER AIR CONTROLLABLE ALTERNATIVE TO THE COOLANT
DOUBLE CLAMPING CYLINDER
THE ADJUSTABLE SETTING FORCE OF THE COUNTER SPINDLE FOR THE TAILSTOCK OPERATION IS MADE WITH THE PROGRAMMING FUNCTION 11 TRAVERSING TO A FIXED STOP
MEASURING CYCLES: THERE IS THE POSSIBILITY OF MEASURING WITH PROBES AT THE C-AXIS.
THE 5-AXIS-SIMULTANEOUS MOVEMENT PROGRAMS THE AXES: X, Y, Z, C AND B.
4-PATH BED - ROLLER GUIDES
KUEHLMITTELSPRITZPISTOLE
COMPACT FILTER SYSTEM LNTERLIT
ADDITIONAL COOLANT PUMP 80 BAR, FOR UPPER TOOL CARRIER
CHIP CONVEYOR
ETHERNET INTERFACE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: gildemeister
model: gmx 400 linear
year of construction: 2003
control: siemens 840 d
chuck diameter [mm]: 305
turning diameter [mm]: 640
turning length [mm]: approximately 1,500
spindle transmission rate [mm]: 90 / 90 spindle:
technology: motor spindle
speed: 4,000 rpm
power: 45 kw
torque: 750 nm
c-axis: 0.001 â°
bar passage: 90 mm
chuck diameter (min./max.): 250-400 mm

counter spindle:
technology: motor spindle
speed: 4,000 rpm
power: 45 kw
torque: 750 nm
c-axis: 0.001 â°
bar passage: 90 mm
chuck diameter (min./max.): 250-400 mm
travel in z: 1,500 mm tool holder i (x/y/z/w):
technology: milling spindle on cross slide
speed: 12.000 rpm
power: 22 kw
torque: 100 nm
tool holder: hsk-a63
traverse path x/y/z: 550/220/1,585 mm
rapid traverse in x/y/z: 40/24/70 m / min
b-axis: 240â°

tool carrier ii (x/z):
technology: star revolver with 12 stations
tool holders: vdi40
driven tools: 4,000 rpm, 10.7 kw, 32 nm
travel in x/z: 180/1,400 mm
rapid traverse in x/z: 24/70 m / min

tool magazine:
technology: shelf magazine with double gripper
number of tool stations: 60
tool length (max): 200 mm
tool diameter (maximum): 80 mm

automation:
technology: palletizing unit with robot
workpiece storage: pallet store for 2 x 11 parts
workpiece diameter (maximum): 18-165 mm
robot: rice hrv 40

equipment / accessories:
chip management: swarf conveyor
refrigerant management: internal cooling system with paper band filter
tool breakage monitoring: artis, type ctm
oil and emulsion mist filter: 2 piece mechanical separator, fabr. ifs MANUFACTURER: GILDEMEISTER MODEL: GMX 400 LINEAR YEAR OF CONSTRUCTION: 2003 CONTROL: SIEMENS 840 D CHUCK DIAMETER [MM]: 305 TURNING DIAMETER [MM]: 640 TURNING LENGTH [MM]: APPROXIMATELY 1,500 SPINDLE TRANSMISSION RATE [MM]: 90 / 90 SPINDLE: TECHNOLOGY: MOTOR SPINDLE SPEED: 4,000 RPM POWER: 45 KW TORQUE: 750 NM C-AXIS: 0.001 &ACIRC;&DEG; BAR PASSAGE: 90 MM CHUCK DIAMETER (MIN./MAX.): 250-400 MM COUNTER SPINDLE: TECHNOLOGY: MOTOR SPINDLE SPEED: 4,000 RPM POWER: 45 KW TORQUE: 750 NM C-AXIS: 0.001 &ACIRC;&DEG; BAR PASSAGE: 90 MM CHUCK DIAMETER (MIN./MAX.): 250-400 MM TRAVEL IN Z: 1,500 MM TOOL HOLDER I (X/Y/Z/W): TECHNOLOGY: MILLING SPINDLE ON CROSS SLIDE SPEED: 12.000 RPM POWER: 22 KW TORQUE: 100 NM TOOL HOLDER: HSK-A63 TRAVERSE PATH X/Y/Z: 550/220/1,585 MM RAPID TRAVERSE IN X/Y/Z: 40/24/70 M / MIN B-AXIS: 240&ACIRC;&DEG; TOOL CARRIER II (X/Z): TECHNOLOGY: STAR REVOLVER WITH 12 STATIONS TOOL HOLDERS: VDI40 DRIVEN TOOLS: 4,000 RPM, 10.7 KW, 32 NM TRAVEL IN X/Z: 180/1,400 MM RAPID TRAVERSE IN X/Z: 24/70 M / MIN TOOL MAGAZINE: TECHNOLOGY: SHELF MAGAZINE WITH DOUBLE GRIPPER NUMBER OF TOOL STATIONS: 60 TOOL LENGTH (MAX): 200 MM TOOL DIAMETER (MAXIMUM): 80 MM AUTOMATION: TECHNOLOGY: PALLETIZING UNIT WITH ROBOT WORKPIECE STORAGE: PALLET STORE FOR 2 X 11 PARTS WORKPIECE DIAMETER (MAXIMUM): 18-165 MM ROBOT: RICE HRV 40 EQUIPMENT / ACCESSORIES: CHIP MANAGEMENT: SWARF CONVEYOR REFRIGERANT MANAGEMENT: INTERNAL COOLING SYSTEM WITH PAPER BAND FILTER TOOL BREAKAGE MONITORING: ARTIS, TYPE CTM OIL AND EMULSION MIST FILTER: 2 PIECE MECHANICAL SEPARATOR, FABR. IFS
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-manufacturer: costa, type: strettoio, year: 1999, work piece width min-max mm: 180, min.-max. workpiece length in mm: 2200, stages: 5, year :1999 MANUFACTURER: COSTA, TYPE: STRETTOIO, YEAR: 1999, WORK PIECE WIDTH MIN-MAX MM: 180, MIN.-MAX. WORKPIECE LENGTH IN MM: 2200, STAGES: 5, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: emag
model: vsc 250 duo
year of manufacture: 2007
control: siemens 840 d
chuck diameter [mm]: 250 spindle:
technology: each work space a motor spindle
rpm: 6.000 rpm
power: 39 kw
torque: 460 nm
c-axis: 0.01 â°
workpiece clamping: 3 - jaw chucks, schunk rota nc 250 71

tool carrier (x/z):
technology: each work space a stern turret with 12 stations
tool holder: vdi40
driven tools: 6,000 rpm, 9 kw, 30 nm
travel in x/z: 850/200 mm
rapid traverse in x/z: 45/30 m / min

automation:
technology: pallet circulation system with shuttle as converter
â?¢pallet quantity: 12 pallet stack, adjustment range 40-260 mm, height 350 mm
workpiece transport system: shuttle with gripper kit ã¸55 220 mm

equipment / accessories:
chip management: swarf conveyor
refrigerant management: internal cooling system with double filter, 30 bar
workpiece measuring: measuring probe, marposs (left workspace)
tool breakage monitoring: artis, type ctm
oil and emulsion mist filter: 2 piece mechanical separator, fabr. ifs MANUFACTURER: EMAG MODEL: VSC 250 DUO YEAR OF MANUFACTURE: 2007 CONTROL: SIEMENS 840 D CHUCK DIAMETER [MM]: 250 SPINDLE: TECHNOLOGY: EACH WORK SPACE A MOTOR SPINDLE RPM: 6.000 RPM POWER: 39 KW TORQUE: 460 NM C-AXIS: 0.01 &ACIRC;&DEG; WORKPIECE CLAMPING: 3 - JAW CHUCKS, SCHUNK ROTA NC 250 71 TOOL CARRIER (X/Z): TECHNOLOGY: EACH WORK SPACE A STERN TURRET WITH 12 STATIONS TOOL HOLDER: VDI40 DRIVEN TOOLS: 6,000 RPM, 9 KW, 30 NM TRAVEL IN X/Z: 850/200 MM RAPID TRAVERSE IN X/Z: 45/30 M / MIN AUTOMATION: TECHNOLOGY: PALLET CIRCULATION SYSTEM WITH SHUTTLE AS CONVERTER &ACIRC;?&CENT;PALLET QUANTITY: 12 PALLET STACK, ADJUSTMENT RANGE 40-260 MM, HEIGHT 350 MM WORKPIECE TRANSPORT SYSTEM: SHUTTLE WITH GRIPPER KIT &ATILDE;&CEDIL;55 220 MM EQUIPMENT / ACCESSORIES: CHIP MANAGEMENT: SWARF CONVEYOR REFRIGERANT MANAGEMENT: INTERNAL COOLING SYSTEM WITH DOUBLE FILTER, 30 BAR WORKPIECE MEASURING: MEASURING PROBE, MARPOSS (LEFT WORKSPACE) TOOL BREAKAGE MONITORING: ARTIS, TYPE CTM OIL AND EMULSION MIST FILTER: 2 PIECE MECHANICAL SEPARATOR, FABR. IFS
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Precio: 7.600 €
Ubicación: Land-: 440 mm<br/>: 1.650 mm<br/>: 70 mm<br/>: 2,9 kw<br/>: 560 mm<br/>: 250 mm<br/>: 300 mm<br/>: 2.950 mm<br/>: 700 mm<br/>: 1.300 mm<br/>: 1.400 kg<br/>with bridge <br/>3 jaws chuck rÖhm 250 mm<br/>quick change toolpost multisuisse without inlets<br/>steady and following rest<br/>face plate<br/>carrier disc<br/>rolling centre<br/>mech. length stop<br/>users manual in german<br/><br/>does not comply with the present industrial safety regulations (amvo &, uvv)<br/><br/><br/>swing over bed: 440 mm<br/>turning length: 1.650 mm<br/>spindlebore: 70 mm<br/>revs: 18 - 1.000 (12)<br/>motor: 2,9 kw<br/>turning diameter over crank: 560 mm<br/>jaw chuck: 250 mm<br/>bed width: 300 mm<br/>length: 2.950 mm<br/>width: 700 mm<br/>height: 1.300 mm<br/>weight: 1.400 kg<br/><br/><br/><br/> : 440 MM
: 1.650 MM
: 70 MM
: 2,9 KW
: 560 MM
: 250 MM
: 300 MM
: 2.950 MM
: 700 MM
: 1.300 MM
: 1.400 KG
WITH BRIDGE
3 JAWS CHUCK RÖHM 250 MM
QUICK CHANGE TOOLPOST MULTISUISSE WITHOUT INLETS
STEADY AND FOLLOWING REST
FACE PLATE
CARRIER DISC
ROLLING CENTRE
MECH. LENGTH STOP
USERS MANUAL IN GERMAN

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)


SWING OVER BED: 440 MM
TURNING LENGTH: 1.650 MM
SPINDLEBORE: 70 MM
REVS: 18 - 1.000 (12)
MOTOR: 2,9 KW
TURNING DIAMETER OVER CRANK: 560 MM
JAW CHUCK: 250 MM
BED WIDTH: 300 MM
LENGTH: 2.950 MM
WIDTH: 700 MM
HEIGHT: 1.300 MM
WEIGHT: 1.400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc turning / milling center
manufacturer: gildemeister
type: gmx 400
year of construction: 2008
control: siemens 840 d powerline
swing above bed: 640
plan travel: 1500
spindle bore: 107
power: 100% 36 kw, 40% 45 kw
speed range: up to 4,000

turning/milling spindle rpm: 12.000 rpm
main spindle spindle diameter: nc tailstock: quill mk 5 tool magazine: 120:.

facilities:
tool carrier above: - with turning and milling spindle as the motor spindle.
-recording capto6 7 axis: spindle: with hollow clamping device 68 mm
 
sub-spindle: with spindle motor ism 65
                                                                       -power 25/37 kw - part hollow clamping cylinder 635 mm deep (hydraulic) 
                                                                       -train tube diameter 68 mm
                                                                       -c axis and spindle brake (hydraulic) additional magazine about the counter spindle: - with 3 tool stations max d = 88 m x 600 mm lg.

tool monitoring system:-company of artis, type ctm high pressure coolant unit 8/28/80 - 8 bar, 20 l/min turning/milling outside.
                                                                      -20 bar, 40l / min & 80 bar, 11 l / min turning/milling spindle inside.
                                                                       -8 bar, 20l / min & 20 bar, 40 l/min for the revolver. 
                                                                       - or 8 bar, 20l / min for the bezel
-via m-function can be selected. 
-coolant tank 980 litres
-band filter system filter unit 40 âµm - immersion cooler 4,5 kw - level monitoring chip conveyor: - scratch version indicator: - 3 x, colored coolant spray gun :

-automatic schiebeschutztã¼ren:-(firma landert)

oil mist separator ifs:-type ife

differential pressure for main spindle

differential pressure for the counter spindle

overload clutches x 1, ys, x 2, z2

conveyor belt for finished parts, promoting to the right, with plastic coating.

connector for bar feeder or bar feeder errors excepted.
 
	
			

 CNC TURNING / MILLING CENTER MANUFACTURER: GILDEMEISTER TYPE: GMX 400 YEAR OF CONSTRUCTION: 2008 CONTROL: SIEMENS 840 D POWERLINE SWING ABOVE BED: 640 PLAN TRAVEL: 1500 SPINDLE BORE: 107 POWER: 100% 36 KW, 40% 45 KW SPEED RANGE: UP TO 4,000 TURNING/MILLING SPINDLE RPM: 12.000 RPM MAIN SPINDLE SPINDLE DIAMETER: NC TAILSTOCK: QUILL MK 5 TOOL MAGAZINE: 120:. FACILITIES: TOOL CARRIER ABOVE: - WITH TURNING AND MILLING SPINDLE AS THE MOTOR SPINDLE. -RECORDING CAPTO6 7 AXIS: SPINDLE: WITH HOLLOW CLAMPING DEVICE 68 MM SUB-SPINDLE: WITH SPINDLE MOTOR ISM 65 -POWER 25/37 KW - PART HOLLOW CLAMPING CYLINDER 635 MM DEEP (HYDRAULIC) -TRAIN TUBE DIAMETER 68 MM -C AXIS AND SPINDLE BRAKE (HYDRAULIC) ADDITIONAL MAGAZINE ABOUT THE COUNTER SPINDLE: - WITH 3 TOOL STATIONS MAX D = 88 M X 600 MM LG. TOOL MONITORING SYSTEM:-COMPANY OF ARTIS, TYPE CTM HIGH PRESSURE COOLANT UNIT 8/28/80 - 8 BAR, 20 L/MIN TURNING/MILLING OUTSIDE. -20 BAR, 40L / MIN & 80 BAR, 11 L / MIN TURNING/MILLING SPINDLE INSIDE. -8 BAR, 20L / MIN & 20 BAR, 40 L/MIN FOR THE REVOLVER. - OR 8 BAR, 20L / MIN FOR THE BEZEL -VIA M-FUNCTION CAN BE SELECTED. -COOLANT TANK 980 LITRES -BAND FILTER SYSTEM FILTER UNIT 40 &ACIRC;&MICRO;M - IMMERSION COOLER 4,5 KW - LEVEL MONITORING CHIP CONVEYOR: - SCRATCH VERSION INDICATOR: - 3 X, COLORED COOLANT SPRAY GUN : -AUTOMATIC SCHIEBESCHUTZT&ATILDE;&FRAC14;REN:-(FIRMA LANDERT) OIL MIST SEPARATOR IFS:-TYPE IFE DIFFERENTIAL PRESSURE FOR MAIN SPINDLE DIFFERENTIAL PRESSURE FOR THE COUNTER SPINDLE OVERLOAD CLUTCHES X 1, YS, X 2, Z2 CONVEYOR BELT FOR FINISHED PARTS, PROMOTING TO THE RIGHT, WITH PLASTIC COATING. CONNECTOR FOR BAR FEEDER OR BAR FEEDER ERRORS EXCEPTED.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 3800 x 1200 x 1500 mm<br/>description: height: 3.80 m depth: 0.91 m carrier: 2.70 m 6x stand approximately 40 carriers bolt (lever protection) incl. WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 3800 X 1200 X 1500 MM
DESCRIPTION: HEIGHT: 3.80 M DEPTH: 0.91 M CARRIER: 2.70 M 6X STAND APPROXIMATELY 40 CARRIERS BOLT (LEVER PROTECTION) INCL.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: daewoo type: puma 200
year of construction: 1999 control: fanuc 18 t swing above bed: 510 mm
swing a.s.l. cross slide: 330 mm travel plan: 210 mm
longitudinal travel: 550 mm
spindle bore: 76 mm
power: 35 kw 100% ed speed range from - to: 45-4500 rpm equipment
axles: 2 tool carrier: 12 stations part hollow clamping device: yes
tailstock: yes
quill stroke automatic: yes
chip conveyor: yes
three-jaw chuck smw auto block: 210 mm

good condition. 

immediately available.

the machine can be seen in schloã? holte-stukenbrock. 


		
subject to error and sale.			
			
				
 MANUFACTURER: DAEWOO TYPE: PUMA 200 YEAR OF CONSTRUCTION: 1999 CONTROL: FANUC 18 T SWING ABOVE BED: 510 MM SWING A.S.L. CROSS SLIDE: 330 MM TRAVEL PLAN: 210 MM LONGITUDINAL TRAVEL: 550 MM SPINDLE BORE: 76 MM POWER: 35 KW 100% ED SPEED RANGE FROM - TO: 45-4500 RPM EQUIPMENT AXLES: 2 TOOL CARRIER: 12 STATIONS PART HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES THREE-JAW CHUCK SMW AUTO BLOCK: 210 MM GOOD CONDITION. IMMEDIATELY AVAILABLE. THE MACHINE CAN BE SEEN IN SCHLO&ATILDE;? HOLTE-STUKENBROCK. SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 2700 x 1100 x 800 mm<br/>description: consisting of 3 uprights, height approx. 2500 mm, depth 1000 mm, 10 carriers length approx. 2700 mm, rack is dismantled, on pallet, including 5 wooden shelves approx. 2700 x 900 mm WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 1100 X 800 MM
DESCRIPTION: CONSISTING OF 3 UPRIGHTS, HEIGHT APPROX. 2500 MM, DEPTH 1000 MM, 10 CARRIERS LENGTH APPROX. 2700 MM, RACK IS DISMANTLED, ON PALLET, INCLUDING 5 WOODEN SHELVES APPROX. 2700 X 900 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 194.000 €
Ubicación: Land-can be filled:

1 l / 10.000 fl/h / wet glue labelling / 6s-carrier

0.5 l / 12,000 fl/h / wrap sleeve labelling / 6s-carrier / 12s trays

0,33 l / 12,000 fl/h wrap sleeve labelling  / 12s trays

pet line consisting of:

(1) bottle task system, manufacturer posimat type depemat, consisting of: inlet roller conveyor, b 800 mm, l 7,000 mm, pallet lift, box location sampling system, vacuum lifters, stacking, euro pallet output magazine, transfer chute, stainless steel hopper, 1200 x 3,000 mm, strand conveyors, transfer station
year of construction: 2002

(2) 1 x belt conveying system, comprising: belt conveyor table 1200 x 3,000 mm, belt conveyors, belt width 400 mm, l 7,000 mm, belt conveyors, belt width 80 mm, l 18 m
year of construction: 1992

3) 1 x bottle unscrambler, manufacturer pace, type m500ssd, separation equipment, bottle location detection, erector, guarding
year of construction: 2002

4) 1 x belt conveyor manufacturer khs, belt width 80 mm, l 24 m
year of construction: 2002

(5) 1 x bottle filler, manufacturer khs, type rinser fr em / innofill nrf, comprising: flush head, 30 shots, circulation system, transfer conveyor, filling station, hot, 32 be filling heads, cover feeder, screw unit, switch - / control cabinet, full enclosure, ext. cip system, reservoir, capacity approx. 3,000 l, plate coolers, pumps
year of manufacture 2002

6) 1 x buffer belt, manufacturer gronemeyer, belt width 80 mm, 2 climbing arches, total length approx. 54 m
year of construction: 2002

7) 1 x recooling, manufacturer khs, plant dimensions 3,500 x 12,000 mm, h 2500 mm, mounted plate heat exchanger
year of construction: 2002

8) 1 chain conveyor, chain width 200 mm, l 7,000 mm
year of construction: 1992

9) 1 x chain conveyors, manufacturer khs, chain width 600 mm, l 9.000 mm
year of construction: 1992

10) 1 x chain conveyors, chain width 200 mm, l 6,000 mm
year of construction: 1992

11) 1 x chain conveyors, chain width of 800 mm, l 20 m, separation, crossover station
year of construction: 1992
cooling fan, year of construction: 2002

12) 1 x circulation labeler, manufacturer of krones, for bottle size 1,0 l, 2 tagging works, pressure station, hot glue factory
year of construction: 1991

13) 1 x level / label control station, manufacturer heuft type spectrum
year of construction: 1991

14) 1 x chain conveyors, chain width 500 mm, good / bad station of part of, l 19 m
year of construction: 1992

15) 1 x chain conveyors, chain width 400 mm, l 22 m
year of construction: 1992

(16) bottle inspector, manufacturer heuft, type basic, year of construction 2002
1 x bottle packaging machine, manufacturer meypack, type sw 60 m, chain conveyors, bottle separation max. 7 pcs., width 600 mm, welding mirror
year of construction: 2002

17) 1 x shrink tunnel, manufacturer meypack, type stu7840, chain conveyors
year of construction: 2002

18) manufacturer sft, 1 x chain conveyors, chain width of 400 mm, l 25 m
year of construction: 1992/2002 (obsolete 2002)

19) 1 x carrying handle station, feed conveyors, film recording, roll width of maximum 400 mm, clamping station, deflection unit, ver gluing station, guarding, control
manufacturers project, progrip type es-40, year of construction 2002

20) 1 x labeler, manufacturer weber, type 5200 top labeling
year of construction: 2006

21) 1 x chain conveyors, manufacturer sft, chain width 300 mm, l 9.000 mm
year of construction: 1992/2002 (obsolete 2002)

22) 1 x chain conveyors, manufacturer sft, chain width of 400 mm, switch station, l 33 m
year of construction: 1992/2002 (obsolete 2002)

23) manufacturer sft, 1 x belt conveyors, belt width 600 mm, l 2,800 mm
year of construction 1992/2002 (obsolete 2002)

24) 1 x solution tank, manufacturer: sailors, capacity 38,000 l, isolated, standing
year of construction: 1991

25) 1 x cip system, manufacturer bertuzzi, type pdrc00, reservoir, capacity approx. 5,000 litres, manhole, recording frame, sight glass, electric pump, switching / control cabinet, external plate cooler
year of construction: 2002

26) 1 x traypacker, manufacturer meypack, type sw 60 d, with packing station, foil 400 mm, infeed belt conveyor
type vp-410 k
year of construction: 2002
shrink tunnel, type sw 60 d, year of construction 2003
labeller, manufacturer weber, type 5200ce, year of construction 2002

(27) europe latvians magazine, separation station, transfer roller, manufacturer kettner, year of construction 1992

(28) palletizing plant, manufacturer meypack: cardboard magazine, vacuum separation, bottle to carry strap, collecting station, tray turning station, cross moving table, decrease hub portal, transfer roller, stretch film plant, film width 600 mm, to strapping height of maximum 2000 mm , circulation system, output roller conveyor, guarding, photoelectric tracking, switching / control unit
year of construction: 2006

pet-line available: as of 01.04.2019 CAN BE FILLED: 1 L / 10.000 FL/H / WET GLUE LABELLING / 6S-CARRIER 0.5 L / 12,000 FL/H / WRAP SLEEVE LABELLING / 6S-CARRIER / 12S TRAYS 0,33 L / 12,000 FL/H WRAP SLEEVE LABELLING / 12S TRAYS PET LINE CONSISTING OF: (1) BOTTLE TASK SYSTEM, MANUFACTURER POSIMAT TYPE DEPEMAT, CONSISTING OF: INLET ROLLER CONVEYOR, B 800 MM, L 7,000 MM, PALLET LIFT, BOX LOCATION SAMPLING SYSTEM, VACUUM LIFTERS, STACKING, EURO PALLET OUTPUT MAGAZINE, TRANSFER CHUTE, STAINLESS STEEL HOPPER, 1200 X 3,000 MM, STRAND CONVEYORS, TRANSFER STATION YEAR OF CONSTRUCTION: 2002 (2) 1 X BELT CONVEYING SYSTEM, COMPRISING: BELT CONVEYOR TABLE 1200 X 3,000 MM, BELT CONVEYORS, BELT WIDTH 400 MM, L 7,000 MM, BELT CONVEYORS, BELT WIDTH 80 MM, L 18 M YEAR OF CONSTRUCTION: 1992 3) 1 X BOTTLE UNSCRAMBLER, MANUFACTURER PACE, TYPE M500SSD, SEPARATION EQUIPMENT, BOTTLE LOCATION DETECTION, ERECTOR, GUARDING YEAR OF CONSTRUCTION: 2002 4) 1 X BELT CONVEYOR MANUFACTURER KHS, BELT WIDTH 80 MM, L 24 M YEAR OF CONSTRUCTION: 2002 (5) 1 X BOTTLE FILLER, MANUFACTURER KHS, TYPE RINSER FR EM / INNOFILL NRF, COMPRISING: FLUSH HEAD, 30 SHOTS, CIRCULATION SYSTEM, TRANSFER CONVEYOR, FILLING STATION, HOT, 32 BE FILLING HEADS, COVER FEEDER, SCREW UNIT, SWITCH - / CONTROL CABINET, FULL ENCLOSURE, EXT. CIP SYSTEM, RESERVOIR, CAPACITY APPROX. 3,000 L, PLATE COOLERS, PUMPS YEAR OF MANUFACTURE 2002 6) 1 X BUFFER BELT, MANUFACTURER GRONEMEYER, BELT WIDTH 80 MM, 2 CLIMBING ARCHES, TOTAL LENGTH APPROX. 54 M YEAR OF CONSTRUCTION: 2002 7) 1 X RECOOLING, MANUFACTURER KHS, PLANT DIMENSIONS 3,500 X 12,000 MM, H 2500 MM, MOUNTED PLATE HEAT EXCHANGER YEAR OF CONSTRUCTION: 2002 8) 1 CHAIN CONVEYOR, CHAIN WIDTH 200 MM, L 7,000 MM YEAR OF CONSTRUCTION: 1992 9) 1 X CHAIN CONVEYORS, MANUFACTURER KHS, CHAIN WIDTH 600 MM, L 9.000 MM YEAR OF CONSTRUCTION: 1992 10) 1 X CHAIN CONVEYORS, CHAIN WIDTH 200 MM, L 6,000 MM YEAR OF CONSTRUCTION: 1992 11) 1 X CHAIN CONVEYORS, CHAIN WIDTH OF 800 MM, L 20 M, SEPARATION, CROSSOVER STATION YEAR OF CONSTRUCTION: 1992 COOLING FAN, YEAR OF CONSTRUCTION: 2002 12) 1 X CIRCULATION LABELER, MANUFACTURER OF KRONES, FOR BOTTLE SIZE 1,0 L, 2 TAGGING WORKS, PRESSURE STATION, HOT GLUE FACTORY YEAR OF CONSTRUCTION: 1991 13) 1 X LEVEL / LABEL CONTROL STATION, MANUFACTURER HEUFT TYPE SPECTRUM YEAR OF CONSTRUCTION: 1991 14) 1 X CHAIN CONVEYORS, CHAIN WIDTH 500 MM, GOOD / BAD STATION OF PART OF, L 19 M YEAR OF CONSTRUCTION: 1992 15) 1 X CHAIN CONVEYORS, CHAIN WIDTH 400 MM, L 22 M YEAR OF CONSTRUCTION: 1992 (16) BOTTLE INSPECTOR, MANUFACTURER HEUFT, TYPE BASIC, YEAR OF CONSTRUCTION 2002 1 X BOTTLE PACKAGING MACHINE, MANUFACTURER MEYPACK, TYPE SW 60 M, CHAIN CONVEYORS, BOTTLE SEPARATION MAX. 7 PCS., WIDTH 600 MM, WELDING MIRROR YEAR OF CONSTRUCTION: 2002 17) 1 X SHRINK TUNNEL, MANUFACTURER MEYPACK, TYPE STU7840, CHAIN CONVEYORS YEAR OF CONSTRUCTION: 2002 18) MANUFACTURER SFT, 1 X CHAIN CONVEYORS, CHAIN WIDTH OF 400 MM, L 25 M YEAR OF CONSTRUCTION: 1992/2002 (OBSOLETE 2002) 19) 1 X CARRYING HANDLE STATION, FEED CONVEYORS, FILM RECORDING, ROLL WIDTH OF MAXIMUM 400 MM, CLAMPING STATION, DEFLECTION UNIT, VER GLUING STATION, GUARDING, CONTROL MANUFACTURERS PROJECT, PROGRIP TYPE ES-40, YEAR OF CONSTRUCTION 2002 20) 1 X LABELER, MANUFACTURER WEBER, TYPE 5200 TOP LABELING YEAR OF CONSTRUCTION: 2006 21) 1 X CHAIN CONVEYORS, MANUFACTURER SFT, CHAIN WIDTH 300 MM, L 9.000 MM YEAR OF CONSTRUCTION: 1992/2002 (OBSOLETE 2002) 22) 1 X CHAIN CONVEYORS, MANUFACTURER SFT, CHAIN WIDTH OF 400 MM, SWITCH STATION, L 33 M YEAR OF CONSTRUCTION: 1992/2002 (OBSOLETE 2002) 23) MANUFACTURER SFT, 1 X BELT CONVEYORS, BELT WIDTH 600 MM, L 2,800 MM YEAR OF CONSTRUCTION 1992/2002 (OBSOLETE 2002) 24) 1 X SOLUTION TANK, MANUFACTURER: SAILORS, CAPACITY 38,000 L, ISOLATED, STANDING YEAR OF CONSTRUCTION: 1991 25) 1 X CIP SYSTEM, MANUFACTURER BERTUZZI, TYPE PDRC00, RESERVOIR, CAPACITY APPROX. 5,000 LITRES, MANHOLE, RECORDING FRAME, SIGHT GLASS, ELECTRIC PUMP, SWITCHING / CONTROL CABINET, EXTERNAL PLATE COOLER YEAR OF CONSTRUCTION: 2002 26) 1 X TRAYPACKER, MANUFACTURER MEYPACK, TYPE SW 60 D, WITH PACKING STATION, FOIL 400 MM, INFEED BELT CONVEYOR TYPE VP-410 K YEAR OF CONSTRUCTION: 2002 SHRINK TUNNEL, TYPE SW 60 D, YEAR OF CONSTRUCTION 2003 LABELLER, MANUFACTURER WEBER, TYPE 5200CE, YEAR OF CONSTRUCTION 2002 (27) EUROPE LATVIANS MAGAZINE, SEPARATION STATION, TRANSFER ROLLER, MANUFACTURER KETTNER, YEAR OF CONSTRUCTION 1992 (28) PALLETIZING PLANT, MANUFACTURER MEYPACK: CARDBOARD MAGAZINE, VACUUM SEPARATION, BOTTLE TO CARRY STRAP, COLLECTING STATION, TRAY TURNING STATION, CROSS MOVING TABLE, DECREASE HUB PORTAL, TRANSFER ROLLER, STRETCH FILM PLANT, FILM WIDTH 600 MM, TO STRAPPING HEIGHT OF MAXIMUM 2000 MM , CIRCULATION SYSTEM, OUTPUT ROLLER CONVEYOR, GUARDING, PHOTOELECTRIC TRACKING, SWITCHING / CONTROL UNIT YEAR OF CONSTRUCTION: 2006 PET-LINE AVAILABLE: AS OF 01.04.2019
Vendedor: MVRG UG (haftungsbeschränkt) & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2800 x 1000 x 800 mm<br/>description: consisting of 2 uprights, height approx. 2350 mm, depth 1000 mm, 8 carriers length approx. 2700 mm, rack is dismantled, on pallet WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2800 X 1000 X 800 MM
DESCRIPTION: CONSISTING OF 2 UPRIGHTS, HEIGHT APPROX. 2350 MM, DEPTH 1000 MM, 8 CARRIERS LENGTH APPROX. 2700 MM, RACK IS DISMANTLED, ON PALLET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: gildemeister type: ctx 500 series 2
year of construction: 1999 control: heidenhain swing above bed: 680 mm
swing a.s.l. cross slide: 455 mm travel plan: 320 mm
longitudinal travel: 1097 mm
spindle bore: 107 mm
power: 23 kw 100% ed speed range from - to: 18-3600 rpm equipment
axles: 2 tool carrier: 12 stations vdi 40
part of hollow clamping device: yes
tailstock: yes
quill stroke automatic: yes
chip conveyor: yes
two-jaw chuck hansen: 250 mm

good condition. 

immediately available.

subject to error and sale.			
 MANUFACTURER: GILDEMEISTER TYPE: CTX 500 SERIES 2 YEAR OF CONSTRUCTION: 1999 CONTROL: HEIDENHAIN SWING ABOVE BED: 680 MM SWING A.S.L. CROSS SLIDE: 455 MM TRAVEL PLAN: 320 MM LONGITUDINAL TRAVEL: 1097 MM SPINDLE BORE: 107 MM POWER: 23 KW 100% ED SPEED RANGE FROM - TO: 18-3600 RPM EQUIPMENT AXLES: 2 TOOL CARRIER: 12 STATIONS VDI 40 PART OF HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES TWO-JAW CHUCK HANSEN: 250 MM GOOD CONDITION. IMMEDIATELY AVAILABLE. SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 14.500 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 6000 x 2500 x 2500 mm<br/>c-axis: ja / yes <br/>setting measure approx (l x w x h): 8000 x 2500 x 2500 mm<br/>description: machine available from only at the 06.11.2018 <h3>-biesse rover xl cnc machining center with 2 operating units / spindles-</h3> <br> <br> <b>machine configuration:</b> - xl2 - rover 24 ats<br> <b>ats panel supports:</b><br> belt conveyor for chips removal, digital display on panel support, vacuum module for ats work table. dimensions 132 x 146 x 29 mm, prearrangement for pneumatic locking devices on the sliding supports of the ats work table, uniclamp module. for piece thickness from 40 to 98 mm.<br> <b>operating units:</b><br> -1. spindle 7.5 kw (10.2 hp)/12000 rpm electrospindle with long flange - hsk f63<br> -2. spindle 7,5 kw (10,2 hp)/12000 rpm electrospindle with long flange - hsk f63<br> -geared operating unit - 360° rotation - for electrospindles with long flange with iso and hsk adaptors<br> <b>tool-carriers for automatic toolchange:</b> revolver tool changer with 10 places, with double position for tool change<br> <b>hsk f63 aggregates:</b><br> aggregate with 1 outlet for horizontal routings, hsk f63 adaptor - motor and collet on the same axis<br> 17 colour screen, in replacement of the standard 15 screen. for machines with nc500 and nc1000.<br> <b>safety devices:</b> safety devices in compliance with the ec 89/392 regulation - for version xl<br> <b>special executions:</b> nc1000?<br> we take no responsibility for any errors in these data!! WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2500 X 2500 MM
C-AXIS: JA / YES
SETTING MEASURE APPROX (L X W X H): 8000 X 2500 X 2500 MM
DESCRIPTION: MACHINE AVAILABLE FROM ONLY AT THE 06.11.2018

-BIESSE ROVER XL CNC MACHINING CENTER WITH 2 OPERATING UNITS / SPINDLES-



MACHINE CONFIGURATION: - XL2 - ROVER 24 ATS
ATS PANEL SUPPORTS:
BELT CONVEYOR FOR CHIPS REMOVAL, DIGITAL DISPLAY ON PANEL SUPPORT, VACUUM MODULE FOR ATS WORK TABLE. DIMENSIONS 132 X 146 X 29 MM, PREARRANGEMENT FOR PNEUMATIC LOCKING DEVICES ON THE SLIDING SUPPORTS OF THE ATS WORK TABLE, UNICLAMP MODULE. FOR PIECE THICKNESS FROM 40 TO 98 MM.
OPERATING UNITS:
-1. SPINDLE 7.5 KW (10.2 HP)/12000 RPM ELECTROSPINDLE WITH LONG FLANGE - HSK F63
-2. SPINDLE 7,5 KW (10,2 HP)/12000 RPM ELECTROSPINDLE WITH LONG FLANGE - HSK F63
-GEARED OPERATING UNIT - 360° ROTATION - FOR ELECTROSPINDLES WITH LONG FLANGE WITH ISO AND HSK ADAPTORS
TOOL-CARRIERS FOR AUTOMATIC TOOLCHANGE: REVOLVER TOOL CHANGER WITH 10 PLACES, WITH DOUBLE POSITION FOR TOOL CHANGE
HSK F63 AGGREGATES:
AGGREGATE WITH 1 OUTLET FOR HORIZONTAL ROUTINGS, HSK F63 ADAPTOR - MOTOR AND COLLET ON THE SAME AXIS
17 COLOUR SCREEN, IN REPLACEMENT OF THE STANDARD 15 SCREEN. FOR MACHINES WITH NC500 AND NC1000.
SAFETY DEVICES: SAFETY DEVICES IN COMPLIANCE WITH THE EC 89/392 REGULATION - FOR VERSION XL
SPECIAL EXECUTIONS: NC1000?
WE TAKE NO RESPONSIBILITY FOR ANY ERRORS IN THESE DATA!!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used cnc turning and milling center index r 300 ratio line.
control index c200-4 d (siemens 840 d sl);

main and sub spindle:
max. bar passage mm 102;
spindle nose iso 702/1 gr. 8;
3-jaw chuck smw kncs-nb 325-104;
max. speed min-1 3,500;
max. power kw 46;
c-axis degree 0.0001;
stroke z-axis mm 610;
stroke x-axis (counter spindle) 780 mm

tool carrier 1 (upper) and tool carrier 2 (lower) with motor spindle:
stroke y-axis mm +/-140;
b-axis swivel angle degree 270;
tool holder hsk-t63;
max. speed min-1 9,000; driven tool
max. power driven tool kw 24;

tool changer with chain-type magazine for tool carrier 1 and 2:
number of tool stations 2 x 70 piece;
tool holder shank hsk-t63 din 69893;

accessories:
internal loading automation / portal loading system;
workpiece storage with 15 pallets;
general grinding cycles;
extraction system;
chip conveyors;
paper band filter system - coolant pressure 10-80 bar;
  USED CNC TURNING AND MILLING CENTER INDEX R 300 RATIO LINE. CONTROL INDEX C200-4 D (SIEMENS 840 D SL); MAIN AND SUB SPINDLE: MAX. BAR PASSAGE MM 102; SPINDLE NOSE ISO 702/1 GR. 8; 3-JAW CHUCK SMW KNCS-NB 325-104; MAX. SPEED MIN-1 3,500; MAX. POWER KW 46; C-AXIS DEGREE 0.0001; STROKE Z-AXIS MM 610; STROKE X-AXIS (COUNTER SPINDLE) 780 MM TOOL CARRIER 1 (UPPER) AND TOOL CARRIER 2 (LOWER) WITH MOTOR SPINDLE: STROKE Y-AXIS MM +/-140; B-AXIS SWIVEL ANGLE DEGREE 270; TOOL HOLDER HSK-T63; MAX. SPEED MIN-1 9,000; DRIVEN TOOL MAX. POWER DRIVEN TOOL KW 24; TOOL CHANGER WITH CHAIN-TYPE MAGAZINE FOR TOOL CARRIER 1 AND 2: NUMBER OF TOOL STATIONS 2 X 70 PIECE; TOOL HOLDER SHANK HSK-T63 DIN 69893; ACCESSORIES: INTERNAL LOADING AUTOMATION / PORTAL LOADING SYSTEM; WORKPIECE STORAGE WITH 15 PALLETS; GENERAL GRINDING CYCLES; EXTRACTION SYSTEM; CHIP CONVEYORS; PAPER BAND FILTER SYSTEM - COOLANT PRESSURE 10-80 BAR;
Vendedor: GEMATEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 600 x 400 x 1350 mm<br/>description: serial number 792-2287, operating pressure 0.8 mpa, air consumption 4 l/stroke, stroke 20 mm, with foot pedal, on mobile steel carrier, with accessories WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 400 X 1350 MM
DESCRIPTION: SERIAL NUMBER 792-2287, OPERATING PRESSURE 0.8 MPA, AIR CONSUMPTION 4 L/STROKE, STROKE 20 MM, WITH FOOT PEDAL, ON MOBILE STEEL CARRIER, WITH ACCESSORIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-internal circular grinding machine with plan grinding equipment, second-hand
internal and face grinding machine, used
type / type: si 6/1 x 315
manufacturer / make: wmw
year / year of make: 1983
schleifbarer the protection of workpiece diameter
/ grinding diameter: inner / internal 20... 400 mm;
outside / external 500 mm
maximum workpiece diameter workpiece protection /.
maximum diameter of work piece: 500 mm
max grinding depth / maximum grinding length: 315 mm
schleifbarer angle of cone / cone grinding: 60 â°
internal grinding motor power / power drive
motor grinding of internal: 7,5 kw
internal grinding spindle speeds / rev's of internal
grinding spindle: 2640... 16500 rpm
power cylindrical grinding device / power
drive of face grinding attachment: 4 kw
power work-piece motor / power drive
of workpiece engine: 1.5 kw
workpiece spindle speeds / rev's piece of work
spindle: 40... 400 rpm
table speed / steplessly variable table
traverse speed: 0, 1... 8 m / min
rapid / rapid movement of table: 10 m / min
table way / stroke table 630 mm
maximum distance from the workpiece spindle flange
     grinding spindle carrier / maximum distance between
     work piece spindle flange and grinding spindle: 1250 mm
maximum power requirements / connected power: 16 kw
weight / weight: 5,8 t

specification: different jaw chuck INTERNAL CIRCULAR GRINDING MACHINE WITH PLAN GRINDING EQUIPMENT, SECOND-HAND INTERNAL AND FACE GRINDING MACHINE, USED TYPE / TYPE: SI 6/1 X 315 MANUFACTURER / MAKE: WMW YEAR / YEAR OF MAKE: 1983 SCHLEIFBARER THE PROTECTION OF WORKPIECE DIAMETER / GRINDING DIAMETER: INNER / INTERNAL 20... 400 MM; OUTSIDE / EXTERNAL 500 MM MAXIMUM WORKPIECE DIAMETER WORKPIECE PROTECTION /. MAXIMUM DIAMETER OF WORK PIECE: 500 MM MAX GRINDING DEPTH / MAXIMUM GRINDING LENGTH: 315 MM SCHLEIFBARER ANGLE OF CONE / CONE GRINDING: 60 &ACIRC;&DEG; INTERNAL GRINDING MOTOR POWER / POWER DRIVE MOTOR GRINDING OF INTERNAL: 7,5 KW INTERNAL GRINDING SPINDLE SPEEDS / REV'S OF INTERNAL GRINDING SPINDLE: 2640... 16500 RPM POWER CYLINDRICAL GRINDING DEVICE / POWER DRIVE OF FACE GRINDING ATTACHMENT: 4 KW POWER WORK-PIECE MOTOR / POWER DRIVE OF WORKPIECE ENGINE: 1.5 KW WORKPIECE SPINDLE SPEEDS / REV'S PIECE OF WORK SPINDLE: 40... 400 RPM TABLE SPEED / STEPLESSLY VARIABLE TABLE TRAVERSE SPEED: 0, 1... 8 M / MIN RAPID / RAPID MOVEMENT OF TABLE: 10 M / MIN TABLE WAY / STROKE TABLE 630 MM MAXIMUM DISTANCE FROM THE WORKPIECE SPINDLE FLANGE GRINDING SPINDLE CARRIER / MAXIMUM DISTANCE BETWEEN WORK PIECE SPINDLE FLANGE AND GRINDING SPINDLE: 1250 MM MAXIMUM POWER REQUIREMENTS / CONNECTED POWER: 16 KW WEIGHT / WEIGHT: 5,8 T SPECIFICATION: DIFFERENT JAW CHUCK
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 55 kg<br/>dimensions (l x w x h) approx.: 440 x 420 x 1230 mm<br/>description: article number 280226, serial number 792-2030, operating pressure 0.8 mpa, air consumption 4 l/stroke, stroke 20 mm, with foot pedal and steel carrier WEIGHT APPROX.: 55 KG
DIMENSIONS (L X W X H) APPROX.: 440 X 420 X 1230 MM
DESCRIPTION: ARTICLE NUMBER 280226, SERIAL NUMBER 792-2030, OPERATING PRESSURE 0.8 MPA, AIR CONSUMPTION 4 L/STROKE, STROKE 20 MM, WITH FOOT PEDAL AND STEEL CARRIER
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more CARRIER types: