1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-control system: prototrak smx	
table: 355 x 1372 mm	
travel distances:	
x: 780 mm	
y: 505 mm	
z: 500 mm	
double-sided spindle rotation + - 90	
tool holder: iso 40	
spindle speed: 60 - 5000 rpm	
motor power 3.75 kw	
machine weight: 2300 kg	
accessories:	
30 tool holders	
collet	
two vise clamps	
central lubrication
  CONTROL SYSTEM: PROTOTRAK SMX TABLE: 355 X 1372 MM TRAVEL DISTANCES: X: 780 MM Y: 505 MM Z: 500 MM DOUBLE-SIDED SPINDLE ROTATION + - 90 TOOL HOLDER: ISO 40 SPINDLE SPEED: 60 - 5000 RPM MOTOR POWER 3.75 KW MACHINE WEIGHT: 2300 KG ACCESSORIES: 30 TOOL HOLDERS COLLET TWO VISE CLAMPS CENTRAL LUBRICATION
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-filter reverse osmosis plant double pass q=5m3/h, make culligan, type aqua-cleer iw e, no 05 14108314, new 2014, floor space 7,0x1,2 m, total height 2,2 m, extra specifications out: demineralised water, outletflange dn40, q=5m3/hreject: outletflange dn25, q=1,85m3/h in: petreated water, inletflange dn25, q=6,85m3/h, water temperature 20°c, inlet- water pressure 1,5 bar min. recovery ratio 70-80%, operating pressure 12-14 bar, installed power 9,5 kw, electricity supply 380-415 volt, 50 hz :protec pressure vessels pro-8-300-sp, first pass 6 osmotic membranes, second pass 5 osmotic membranes. : antiscalant (chem 2000) dosing system 1ltr/h, pump grundfos crn10, neutralization (naoh) dosing system 1ltr/h, pump grundfos crn10 miscellaneous filtersnew arrivalsmiscellaneous > miscellaneous filtersnew arrivals FILTER REVERSE OSMOSIS PLANT DOUBLE PASS Q=5M3/H, MAKE CULLIGAN, TYPE AQUA-CLEER IW E, NO 05 14108314, NEW 2014, FLOOR SPACE 7,0X1,2 M, TOTAL HEIGHT 2,2 M, EXTRA SPECIFICATIONS OUT: DEMINERALISED WATER, OUTLETFLANGE DN40, Q=5M3/HREJECT: OUTLETFLANGE DN25, Q=1,85M3/H IN: PETREATED WATER, INLETFLANGE DN25, Q=6,85M3/H, WATER TEMPERATURE 20°C, INLET- WATER PRESSURE 1,5 BAR MIN. RECOVERY RATIO 70-80%, OPERATING PRESSURE 12-14 BAR, INSTALLED POWER 9,5 KW, ELECTRICITY SUPPLY 380-415 VOLT, 50 HZ :PROTEC PRESSURE VESSELS PRO-8-300-SP, FIRST PASS 6 OSMOTIC MEMBRANES, SECOND PASS 5 OSMOTIC MEMBRANES. : ANTISCALANT (CHEM 2000) DOSING SYSTEM 1LTR/H, PUMP GRUNDFOS CRN10, NEUTRALIZATION (NAOH) DOSING SYSTEM 1LTR/H, PUMP GRUNDFOS CRN10 MISCELLANEOUS FILTERSNEW ARRIVALSMISCELLANEOUS > MISCELLANEOUS FILTERSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-double sided calibrating sanding machine with mechanical oscillation of the belts lasm volpato rcg 1200

max working lenght mm. 1200

max working width mm. 1200

max working height mm. 230

year of production 1999

ce DOUBLE SIDED CALIBRATING SANDING MACHINE WITH MECHANICAL OSCILLATION OF THE BELTS LASM VOLPATO RCG 1200 MAX WORKING LENGHT MM. 1200 MAX WORKING WIDTH MM. 1200 MAX WORKING HEIGHT MM. 230 YEAR OF PRODUCTION 1999 CE
Vendedor: VERGA ERCOLE di Roberto Verga & C. S.A.S
Año de construcción: usado
Ubicación: Land-filter reverse osmosis plant double pass q=5m3/h, make culligan, type aqua-cleer iw e, no 0514108312, new 2014, floor space 7,0x1,2 m, total height 2,2 m, extra specifications out: demineralised water, outletflange dn40, q=5m3/h reject: outletflange dn25, q=1,85m3/h in: petreated water, inletflange dn25, q=6,85m3/h, water temperature 20°c, inlet- water pressure 1,5 bar min. recovey ratio 70-80%, :operating pressure 12-14 bar, :installed power 9,5 kw, electricity supply 380-415 volt, 50 hz : protec pressure vessels pro-8-300-sp, first pass 6 osmotic membranes, second pass 5 osmotic membranes. : :antiscalant (chem 2000) dosing system 1ltr/h, pump grundfos crn10, :neutralization (naoh) dosing system 1ltr/h, pump grundfos crn10 miscellaneous filtersnew arrivalsmiscellaneous > miscellaneous filtersnew arrivals FILTER REVERSE OSMOSIS PLANT DOUBLE PASS Q=5M3/H, MAKE CULLIGAN, TYPE AQUA-CLEER IW E, NO 0514108312, NEW 2014, FLOOR SPACE 7,0X1,2 M, TOTAL HEIGHT 2,2 M, EXTRA SPECIFICATIONS OUT: DEMINERALISED WATER, OUTLETFLANGE DN40, Q=5M3/H REJECT: OUTLETFLANGE DN25, Q=1,85M3/H IN: PETREATED WATER, INLETFLANGE DN25, Q=6,85M3/H, WATER TEMPERATURE 20°C, INLET- WATER PRESSURE 1,5 BAR MIN. RECOVEY RATIO 70-80%, :OPERATING PRESSURE 12-14 BAR, :INSTALLED POWER 9,5 KW, ELECTRICITY SUPPLY 380-415 VOLT, 50 HZ : PROTEC PRESSURE VESSELS PRO-8-300-SP, FIRST PASS 6 OSMOTIC MEMBRANES, SECOND PASS 5 OSMOTIC MEMBRANES. : :ANTISCALANT (CHEM 2000) DOSING SYSTEM 1LTR/H, PUMP GRUNDFOS CRN10, :NEUTRALIZATION (NAOH) DOSING SYSTEM 1LTR/H, PUMP GRUNDFOS CRN10 MISCELLANEOUS FILTERSNEW ARRIVALSMISCELLANEOUS > MISCELLANEOUS FILTERSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-offer munich no. 987 46 has a hole in the 50 mm grid on the table top 18der table siegmund professional and a parallel arrangement of holes in the 25 mm grid on the seiten.die holes have a diameter of 16 mm, and the table is a material thickness of ca. 11, 5-13 mm. the table top is made of through-hardened steel s355j2 n (st 52/3). after processing, the siegmund table is plasma nitrided and coated. the siegmund table is thus doubly hardened. grid lines at a distance of 50 mm will help you with building your vorrichtung.siegmund welding tables 750 mm are standard with scale and siegmund foot standard equipped. machine type welding and spanntischfabrikatsiegmund typprofessional 750artikel-nr.s0.160020.p750.t1abmessungen2.000 x 1,000 x 850 mm incl. fã¼ã?eoberflã¤chenhã¤rtebis 750 vickersfehlerbeschreibunghelle spots on the oberflã¤chelieferumfangsiegmund welding table professional 750siegmund-fuã?-grundausstattunggewicht354 kgzustandneustandort86845 groã?aitingenlieferzeitca. 3-4 wochenneupreis without errors2. 195, 00 â?¬ mwst.preis cpl. with the zubehã¶r1. 921, 00 â?¬ mwst.versandkosten within germany â?¬219.00 incl. packaging vat. ___die machine is located in derwilhelm merkle welding technology gmbhanton-bach-straã?e 3181249 muenchenansprechpartner is mr siegfried awissus. of course we send the machine to you for 60,-â?¬ per spedition in completely germany. our machine ___sie can also contact with 0% finance! we offer sample welding, instrument instruction, as well as a huge range of accessories.  OFFER MUNICH NO. 987 46 HAS A HOLE IN THE 50 MM GRID ON THE TABLE TOP 18DER TABLE SIEGMUND PROFESSIONAL AND A PARALLEL ARRANGEMENT OF HOLES IN THE 25 MM GRID ON THE SEITEN.DIE HOLES HAVE A DIAMETER OF 16 MM, AND THE TABLE IS A MATERIAL THICKNESS OF CA. 11, 5-13 MM. THE TABLE TOP IS MADE OF THROUGH-HARDENED STEEL S355J2 N (ST 52/3). AFTER PROCESSING, THE SIEGMUND TABLE IS PLASMA NITRIDED AND COATED. THE SIEGMUND TABLE IS THUS DOUBLY HARDENED. GRID LINES AT A DISTANCE OF 50 MM WILL HELP YOU WITH BUILDING YOUR VORRICHTUNG.SIEGMUND WELDING TABLES 750 MM ARE STANDARD WITH SCALE AND SIEGMUND FOOT STANDARD EQUIPPED. MACHINE TYPE WELDING AND SPANNTISCHFABRIKATSIEGMUND TYPPROFESSIONAL 750ARTIKEL-NR.S0.160020.P750.T1ABMESSUNGEN2.000 X 1,000 X 850 MM INCL. FüÃ?EOBERFLäCHENHäRTEBIS 750 VICKERSFEHLERBESCHREIBUNGHELLE SPOTS ON THE OBERFLäCHELIEFERUMFANGSIEGMUND WELDING TABLE PROFESSIONAL 750SIEGMUND-FUÃ?-GRUNDAUSSTATTUNGGEWICHT354 KGZUSTANDNEUSTANDORT86845 GROÃ?AITINGENLIEFERZEITCA. 3-4 WOCHENNEUPREIS WITHOUT ERRORS2. 195, 00 Â?¬ MWST.PREIS CPL. WITH THE ZUBEHöR1. 921, 00 Â?¬ MWST.VERSANDKOSTEN WITHIN GERMANY Â?¬219.00 INCL. PACKAGING VAT. ___DIE MACHINE IS LOCATED IN DERWILHELM MERKLE WELDING TECHNOLOGY GMBHANTON-BACH-STRAÃ?E 3181249 MUENCHENANSPRECHPARTNER IS MR SIEGFRIED AWISSUS. OF COURSE WE SEND THE MACHINE TO YOU FOR 60,-Â?¬ PER SPEDITION IN COMPLETELY GERMANY. OUR MACHINE ___SIE CAN ALSO CONTACT WITH 0% FINANCE! WE OFFER SAMPLE WELDING, INSTRUMENT INSTRUCTION, AS WELL AS A HUGE RANGE OF ACCESSORIES.
Vendedor: Wilhelm Merkle Schweißtechnik GmbH
Año de construcción: usado
Ubicación: Land-blower, make aerzener maschinenfabrik gmbh, type gm 15 l, no 747887, new 1998, material mild steel, capacity 16,1 m3/min, pressure build up 1,0 bar /0,5 bar, motor 18,3 kw, inlet dia.100mm, outlet dia.100mm, mounted on frame, floorspace 1,3x1,1 m, total height 1,2 m, extra specifications +++ unused +++blowersnew arrivalsblowers > blowersnew arrivals BLOWER, MAKE AERZENER MASCHINENFABRIK GMBH, TYPE GM 15 L, NO 747887, NEW 1998, MATERIAL MILD STEEL, CAPACITY 16,1 M3/MIN, PRESSURE BUILD UP 1,0 BAR /0,5 BAR, MOTOR 18,3 KW, INLET DIA.100MM, OUTLET DIA.100MM, MOUNTED ON FRAME, FLOORSPACE 1,3X1,1 M, TOTAL HEIGHT 1,2 M, EXTRA SPECIFICATIONS +++ UNUSED +++BLOWERSNEW ARRIVALSBLOWERS > BLOWERSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Precio: 21.000 €
Ubicación: Land-bruderer bsta 30

pressure 30 ton
up to 600 number of strokes/min feeder from left to right
table size: 545 x 470 mm
central lubrication
total power requirement: 5.5 kw
weight of the machine: 2.5t
 BRUDERER BSTA 30 PRESSURE 30 TON UP TO 600 NUMBER OF STROKES/MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM CENTRAL LUBRICATION TOTAL POWER REQUIREMENT: 5.5 KW WEIGHT OF THE MACHINE: 2.5T
Vendedor: Mobilija.DOO
Año de construcción: usado
Ubicación: Land-vertical pressure tank, make hermann waldner gmbh, no 2305, new 1995, material stainless steel (1.4571), capacity 3000 ltr, vessel sizes dia.1500mm, dished top, manhole dia.500mm, top connections (1x)dia.50mm, (3x)dia.40mm, outlet (1x)dia.80mm + (2x)tangentiaal dia.80mm, working pressure -1 / 3 bar, mounted on legs, floorspace 3,2x1,8 m, total height 1,9 m, weight 860 kg, extra specifications tüvpressure vesselsnew arrivalstanks > pressure vesselsnew arrivals VERTICAL PRESSURE TANK, MAKE HERMANN WALDNER GMBH, NO 2305, NEW 1995, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 3000 LTR, VESSEL SIZES DIA.1500MM, DISHED TOP, MANHOLE DIA.500MM, TOP CONNECTIONS (1X)DIA.50MM, (3X)DIA.40MM, OUTLET (1X)DIA.80MM + (2X)TANGENTIAAL DIA.80MM, WORKING PRESSURE -1 / 3 BAR, MOUNTED ON LEGS, FLOORSPACE 3,2X1,8 M, TOTAL HEIGHT 1,9 M, WEIGHT 860 KG, EXTRA SPECIFICATIONS TüVPRESSURE VESSELSNEW ARRIVALSTANKS > PRESSURE VESSELSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: twinhorn
model: vq-1500
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2004 
location: india
origin country: taiwan 
production hours: 32500

general data
measurements width: 2700 mm 
measurements depth: 3300 mm 
measurements height: 2700 mm 
machine weight: 11000 kg

control unit
brand: mitsubishi
model: e18e010e0
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 4800 rpm

movement
x-axis movement: 1530 mm 
y-axis movement: 760 mm 
z-axis movement: 650 mm

media
main electronic connection: 400 v 
power consumption: 25 kva

see full technical specifications of this machine at: abc://bit.ly/2q4pjoz  OVERVIEW BRAND: TWINHORN MODEL: VQ-1500 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2004 LOCATION: INDIA ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 32500 GENERAL DATA MEASUREMENTS WIDTH: 2700 MM MEASUREMENTS DEPTH: 3300 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: MITSUBISHI MODEL: E18E010E0 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4800 RPM MOVEMENT X-AXIS MOVEMENT: 1530 MM Y-AXIS MOVEMENT: 760 MM Z-AXIS MOVEMENT: 650 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 25 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Q4PJOZ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-vertical pressure tank, make hermann waldner gmbh, no 1843, new 1989, material stainless steel (1.4571), capacity 3000 ltr, vessel sizes dia.1500mm, dished top, manhole dia.500mm, top connections (1x)dia.50mm, (3x)dia.40mm, outlet (1x)dia.80mm + (2x) tangential dia.80mm, working pressure -1 / 3 bar, max. temperature 130 gr.c., mounted on legs, floorspace 3,2x1,6 m, total height 1,9 m, weight 760 kg, extra specificationspressure vesselsnew arrivalstanks > pressure vesselsnew arrivals VERTICAL PRESSURE TANK, MAKE HERMANN WALDNER GMBH, NO 1843, NEW 1989, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 3000 LTR, VESSEL SIZES DIA.1500MM, DISHED TOP, MANHOLE DIA.500MM, TOP CONNECTIONS (1X)DIA.50MM, (3X)DIA.40MM, OUTLET (1X)DIA.80MM + (2X) TANGENTIAL DIA.80MM, WORKING PRESSURE -1 / 3 BAR, MAX. TEMPERATURE 130 GR.C., MOUNTED ON LEGS, FLOORSPACE 3,2X1,6 M, TOTAL HEIGHT 1,9 M, WEIGHT 760 KG, EXTRA SPECIFICATIONSPRESSURE VESSELSNEW ARRIVALSTANKS > PRESSURE VESSELSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: dah lih
model: dl-mcv1020ba
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2004
location: india
origin country: taiwan
production hours: 34500

general data
measurements width: 2500 mm 
measurements depth: 2700 mm 
measurements height: 2500 mm 
machine weight: 10500 kg

control unit
brand: fanuc
model: 21i-mb
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 8000 rpm

movement
x-axis movement: 1020 mm 
y-axis movement: 500 mm 
z-axis movement: 500 mm

media
main electronic connection: 400 v 
power consumption: 25 kva

see full technical specifications of this machine at: abc://bit.ly/2ddc4n4 OVERVIEW BRAND: DAH LIH MODEL: DL-MCV1020BA APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2004 LOCATION: INDIA ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 34500 GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 2700 MM MEASUREMENTS HEIGHT: 2500 MM MACHINE WEIGHT: 10500 KG CONTROL UNIT BRAND: FANUC MODEL: 21I-MB CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 8000 RPM MOVEMENT X-AXIS MOVEMENT: 1020 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 500 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 25 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2DDC4N4
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-vertical pressure tank, make hermann waldner gmbh, no 1844, new 1989, material stainless steel (1.4571), capacity 3000 ltr, vessel sizes dia.1500mm, dished top, manhole dia.500mm, top connections (1x)dia.50mm, (3x)dia.40mm, outlet (1x)dia.80mm + (2x)tangentiaal dia.80mm, working pressure -1 / 3 bar, max. temperature 130 gr.c., mounted on legs, floorspace 3,2x1,7 m, total height 1,9 m, weight 700 kg, extra specifications tüvpressure vesselsnew arrivalstanks > pressure vesselsnew arrivals VERTICAL PRESSURE TANK, MAKE HERMANN WALDNER GMBH, NO 1844, NEW 1989, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 3000 LTR, VESSEL SIZES DIA.1500MM, DISHED TOP, MANHOLE DIA.500MM, TOP CONNECTIONS (1X)DIA.50MM, (3X)DIA.40MM, OUTLET (1X)DIA.80MM + (2X)TANGENTIAAL DIA.80MM, WORKING PRESSURE -1 / 3 BAR, MAX. TEMPERATURE 130 GR.C., MOUNTED ON LEGS, FLOORSPACE 3,2X1,7 M, TOTAL HEIGHT 1,9 M, WEIGHT 700 KG, EXTRA SPECIFICATIONS TüVPRESSURE VESSELSNEW ARRIVALSTANKS > PRESSURE VESSELSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: yang
model: ml - 25a 
application type: turning 
machine type: lathes 
availability: immediately 
production year: 1996 
location: the netherlands 
origin country: taiwan 
production hours: 17000

general data
measurements width: 4000 mm 
measurements depth: 2000 mm 
measurements height: 2200 mm 
machine weight: 5000 kg

control unit
brand: fanuc
model: series 0-t
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 45 - 4500 rpm

movement
x-axis movement: 216 mm 
y-axis movement: 520 mm

workpiece
workpiece drm: 250 mm
workpiece x: 20 m/min 
workpiece z: 12 m/min

turret
number of turrets: 1

tools
slots in storage: 8
max tool diameter: 85 mm 
type of tool holder: vdi40

media
main electronic connection: 380 v 
chip conveyor: yes
internal cooling: yes

see full technical specifications of this machine at:
abc://bit.ly/2ru5klc OVERVIEW BRAND: YANG MODEL: ML - 25A APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1996 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 17000 GENERAL DATA MEASUREMENTS WIDTH: 4000 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 5000 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 0-T CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 45 - 4500 RPM MOVEMENT X-AXIS MOVEMENT: 216 MM Y-AXIS MOVEMENT: 520 MM WORKPIECE WORKPIECE DRM: 250 MM WORKPIECE X: 20 M/MIN WORKPIECE Z: 12 M/MIN TURRET NUMBER OF TURRETS: 1 TOOLS SLOTS IN STORAGE: 8 MAX TOOL DIAMETER: 85 MM TYPE OF TOOL HOLDER: VDI40 MEDIA MAIN ELECTRONIC CONNECTION: 380 V CHIP CONVEYOR: YES INTERNAL COOLING: YES SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RU5KLC
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-vertical pressure tank, make hermann waldner gmbh, no 2312, new 1995, material stainless steel (1.4571), capacity 3000 ltr, vessel sizes dia.1500mm, dished top, manhole dia.500mm, top connections (1x)dia.50mm, (3x)dia.40mm, outlet (1x)dia.80mm + (2x)tangential dia.80mm, working pressure -1 / 3 bar, max. temperature 130 gr.c., mounted on legs, floorspace 3,2x1,8 m, total height 1,9 m, weight 875 kg, extra specifications tüvpressure vesselsnew arrivalstanks > pressure vesselsnew arrivals VERTICAL PRESSURE TANK, MAKE HERMANN WALDNER GMBH, NO 2312, NEW 1995, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 3000 LTR, VESSEL SIZES DIA.1500MM, DISHED TOP, MANHOLE DIA.500MM, TOP CONNECTIONS (1X)DIA.50MM, (3X)DIA.40MM, OUTLET (1X)DIA.80MM + (2X)TANGENTIAL DIA.80MM, WORKING PRESSURE -1 / 3 BAR, MAX. TEMPERATURE 130 GR.C., MOUNTED ON LEGS, FLOORSPACE 3,2X1,8 M, TOTAL HEIGHT 1,9 M, WEIGHT 875 KG, EXTRA SPECIFICATIONS TüVPRESSURE VESSELSNEW ARRIVALSTANKS > PRESSURE VESSELSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: bridgeport
model: vmc 800 22
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2001 
location: the netherlands 
origin country: united kingdom 
production hours: 32400

general data
measurements width: 2980 mm 
measurements depth: 2200 mm 
measurements height: 2570 mm 
machine weight: 3750 kg

control unit
brand: heidenhain
model: tnc 410
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 6000 rpm

movement
x-axis movement: 800 mm 
y-axis movement: 510 mm 
z-axis movement: 510 mm

workpiece
workpiece weight: 750 kg

table
outer length: 1000 mm 
outer width: 490 mm

tools
slots in storage: 22
max weight: 6 kg
max tool diameter: 130 mm 
max tool length: 250 mm

media
main electronic connection: 420 v 
power consumption: 20 kva 
internal cooling: yes

see full technical specifications of this machine at:
abc://bit.ly/2z8bxw5 OVERVIEW BRAND: BRIDGEPORT MODEL: VMC 800 22 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2001 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: UNITED KINGDOM PRODUCTION HOURS: 32400 GENERAL DATA MEASUREMENTS WIDTH: 2980 MM MEASUREMENTS DEPTH: 2200 MM MEASUREMENTS HEIGHT: 2570 MM MACHINE WEIGHT: 3750 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: TNC 410 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 RPM MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 510 MM Z-AXIS MOVEMENT: 510 MM WORKPIECE WORKPIECE WEIGHT: 750 KG TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 490 MM TOOLS SLOTS IN STORAGE: 22 MAX WEIGHT: 6 KG MAX TOOL DIAMETER: 130 MM MAX TOOL LENGTH: 250 MM MEDIA MAIN ELECTRONIC CONNECTION: 420 V POWER CONSUMPTION: 20 KVA INTERNAL COOLING: YES SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Z8BXW5
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-film evaporator (2x) short path distillation, make uic gmbh, type ea150/kd50/kd10, no f403-3443, new 2003, stoomwezen, material stainless steel (1.4571), working pressure -1/10 bar, with condensor, mounted on frame, with switchgear, weight 4000 kg, extra specifications including degasser vacuümunit and condenserunit, volume 0,031m3, (8x)heatexchanger for heating/coeling/condenser/evaporate, (4x)vacuum rootsblower, make busch, capacity 250-500 nm3/h, :(1x)vacuum liquidring, make busch, capacity 108 nm3/h, (6x)feed/discharge gearpump, make maag, capacity 35 ltr/h, (3x)centrifugalpump, make gwk, capacity 1800 ltr/h, (1x )separatortank gas/liquid, make busch/aquamin, :including monofluid unit, ss expansiontank 11ltr, make single type 0054/10: electric heater 4,5ltr, make single type 0054/1, power 18kw, 400 volt: cooler : collingsurface 0,25m2, make viesel, type gak, tubes 0,9ltr, : shell 1,45ltr: centrifugal pump, make speck, type ht/cy, 3,3 kw, 400 volt :(atex) : film evaporatorsnew arrivalsdistillation > film evaporatorsnew arrivals FILM EVAPORATOR (2X) SHORT PATH DISTILLATION, MAKE UIC GMBH, TYPE EA150/KD50/KD10, NO F403-3443, NEW 2003, STOOMWEZEN, MATERIAL STAINLESS STEEL (1.4571), WORKING PRESSURE -1/10 BAR, WITH CONDENSOR, MOUNTED ON FRAME, WITH SWITCHGEAR, WEIGHT 4000 KG, EXTRA SPECIFICATIONS INCLUDING DEGASSER VACUüMUNIT AND CONDENSERUNIT, VOLUME 0,031M3, (8X)HEATEXCHANGER FOR HEATING/COELING/CONDENSER/EVAPORATE, (4X)VACUUM ROOTSBLOWER, MAKE BUSCH, CAPACITY 250-500 NM3/H, :(1X)VACUUM LIQUIDRING, MAKE BUSCH, CAPACITY 108 NM3/H, (6X)FEED/DISCHARGE GEARPUMP, MAKE MAAG, CAPACITY 35 LTR/H, (3X)CENTRIFUGALPUMP, MAKE GWK, CAPACITY 1800 LTR/H, (1X )SEPARATORTANK GAS/LIQUID, MAKE BUSCH/AQUAMIN, :INCLUDING MONOFLUID UNIT, SS EXPANSIONTANK 11LTR, MAKE SINGLE TYPE 0054/10: ELECTRIC HEATER 4,5LTR, MAKE SINGLE TYPE 0054/1, POWER 18KW, 400 VOLT: COOLER : COLLINGSURFACE 0,25M2, MAKE VIESEL, TYPE GAK, TUBES 0,9LTR, : SHELL 1,45LTR: CENTRIFUGAL PUMP, MAKE SPECK, TYPE HT/CY, 3,3 KW, 400 VOLT :(ATEX) : FILM EVAPORATORSNEW ARRIVALSDISTILLATION > FILM EVAPORATORSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: lvd
model: mvs 62/16
application type: shearing 
machine type: shearing machines 
availability: immediately 
production year: 1981
location: the netherlands
origin country: belgium 
production hours: 6000

general data
measurements width: 6500 mm 
measurements depth: 2500 mm 
measurements height: 3850 mm 
machine weight: 35000 kg

max material thickness
steel: 16 mm
stainless steel: 16 mm 
aluminium: 20 mm

media
main electronic connection: 380 v

see full technical specifications of this machine at:
abc://bit.ly/2qgeuq9 OVERVIEW BRAND: LVD MODEL: MVS 62/16 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1981 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: BELGIUM PRODUCTION HOURS: 6000 GENERAL DATA MEASUREMENTS WIDTH: 6500 MM MEASUREMENTS DEPTH: 2500 MM MEASUREMENTS HEIGHT: 3850 MM MACHINE WEIGHT: 35000 KG MAX MATERIAL THICKNESS STEEL: 16 MM STAINLESS STEEL: 16 MM ALUMINIUM: 20 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2QGEUQ9
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-; accessories: arbeitsbreite:305, trommelanzahl (4 stck.) ; ACCESSORIES: ARBEITSBREITE:305, TROMMELANZAHL (4 STCK.)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-well-functioning used caterpillar engine (diesel) type 3406

440 kw at 2300 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED CATERPILLAR ENGINE (DIESEL) TYPE 3406 440 KW AT 2300 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-pressure:     12 t<br/>no  of strokes:        hub/min<br/>sheet width:  mm<br/>--------------------------------------------------:  <br/>press design:  <br/>- drive system: eccentric / crank:        <br/>press forces:  <br/>- total force (nominal):     12 to<br/>press table:  <br/>- table surface (left-right):    490 mm<br/>- table surface (front-back):    400 mm<br/>- thickness of bolster plate:     50 mm<br/>- opening in bed (left-right):    250 mm<br/>- opening in bed (front-back):     90 mm<br/>- number of t-slots:      3  <br/>slide:  <br/>- slide force:     12 to<br/>- table surface (left-right):    294 mm<br/>- table surface (front-back):    168 mm<br/>- spigot hole diameter:     32 mm<br/>slide (mechan. press):  <br/>- slide adjustment:     30 mm<br/>- automatic stroke adjustment: yes:        <br/>- stroke min.:      8 mm<br/>- stroke max.:     40 mm<br/>- variable speed: yes:        <br/>- stroke rate (min.):    100 /min<br/>- stroke rate (max.):   1000 /min<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    180 mm<br/>strip-feeder:  <br/>- feeder type: grip feeder:        <br/>- sheet width max:    150 mm<br/>- sheet thickness max:      3 mm<br/>- feeding step min.:      5 mm<br/>- feeding step max.:    120 mm<br/>electrical specifications:  <br/>- total power consumption:    5.5 kw<br/>dimensions / weights:  <br/>- total height:   2203 mm<br/>- total weight approx.:   1800 kg<br/>attachments (presses):  <br/>- european ce standards: yes:        <br/><br/><br/><br/><br/> PRESSURE: 12 T
NO OF STROKES: HUB/MIN
SHEET WIDTH: MM
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: ECCENTRIC / CRANK:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 12 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 490 MM
- TABLE SURFACE (FRONT-BACK): 400 MM
- THICKNESS OF BOLSTER PLATE: 50 MM
- OPENING IN BED (LEFT-RIGHT): 250 MM
- OPENING IN BED (FRONT-BACK): 90 MM
- NUMBER OF T-SLOTS: 3
SLIDE:
- SLIDE FORCE: 12 TO
- TABLE SURFACE (LEFT-RIGHT): 294 MM
- TABLE SURFACE (FRONT-BACK): 168 MM
- SPIGOT HOLE DIAMETER: 32 MM
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 30 MM
- AUTOMATIC STROKE ADJUSTMENT: YES:
- STROKE MIN.: 8 MM
- STROKE MAX.: 40 MM
- VARIABLE SPEED: YES:
- STROKE RATE (MIN.): 100 /MIN
- STROKE RATE (MAX.): 1000 /MIN
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 180 MM
STRIP-FEEDER:
- FEEDER TYPE: GRIP FEEDER:
- SHEET WIDTH MAX: 150 MM
- SHEET THICKNESS MAX: 3 MM
- FEEDING STEP MIN.: 5 MM
- FEEDING STEP MAX.: 120 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 5.5 KW
DIMENSIONS / WEIGHTS:
- TOTAL HEIGHT: 2203 MM
- TOTAL WEIGHT APPROX.: 1800 KG
ATTACHMENTS (PRESSES):
- EUROPEAN CE STANDARDS: YES:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-bobst sp 103-er, 1994
ref.nr: 2587 manufacturer bobst model sp 103-er year built: 1994 speed: 7500 sh/h max sheet size: 103 x 72 cm availability: immediately condition: good price: on technical request spezification: â?¢ centerline
â?¢ non-stop feeder & delivery
â?¢ double sheet control
â?¢ one stripping frame, one universal lower blanking frame, 2 cutting frame â?¢ max speed of 7500 sheets/hour
â?¢ total hours functions 35865
 BOBST SP 103-ER, 1994 REF.NR: 2587 MANUFACTURER BOBST MODEL SP 103-ER YEAR BUILT: 1994 SPEED: 7500 SH/H MAX SHEET SIZE: 103 X 72 CM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; CENTERLINE &ACIRC;?&CENT; NON-STOP FEEDER & DELIVERY &ACIRC;?&CENT; DOUBLE SHEET CONTROL &ACIRC;?&CENT; ONE STRIPPING FRAME, ONE UNIVERSAL LOWER BLANKING FRAME, 2 CUTTING FRAME &ACIRC;?&CENT; MAX SPEED OF 7500 SHEETS/HOUR &ACIRC;?&CENT; TOTAL HOURS FUNCTIONS 35865
Vendedor: PP Lion Trade e.K.
Año de construcción: usado
Ubicación: Land-material width: 0350 mm<br/>material thickness: 8,00 mm<br/>no. of straightening rolls: 19 <br/>diam. of the rolls ca.: 24 mm<br/>thickness min. approx.: 0,14 mm<br/>straight. speed ca.: 10-18 m/ min<br/>between stands ca.: 355 mm<br/>barrel length ca.: 355 mm<br/>drive ca.: 4,20 kw<br/>weight of machine ca.: 1,2 to<br/>dimensions of the machine ca.: 1,60 x 1,30 x 1,40 m<br/>comment:<br/>- vertical roll spacing = 8.50 mm<br/>- central oil lubrication of the cardan shafts and straightening roller bearings<br/>- straightening roller bearing bronze<br/>- support roller bearings nadellager (needle roller bearings)<br/>- inlet table<br/>- outlet conveyor belt<br/><br/>2018 the straightening machine was reviewed and cleaned in our factory.<br/>the electrical system is checked and the leveler is functional and painting.<br/><br/>tests with your material can make by an appointment.<br/><br/><br/><br/><br/> MATERIAL WIDTH: 0350 MM
MATERIAL THICKNESS: 8,00 MM
NO. OF STRAIGHTENING ROLLS: 19
DIAM. OF THE ROLLS CA.: 24 MM
THICKNESS MIN. APPROX.: 0,14 MM
STRAIGHT. SPEED CA.: 10-18 M/ MIN
BETWEEN STANDS CA.: 355 MM
BARREL LENGTH CA.: 355 MM
DRIVE CA.: 4,20 KW
WEIGHT OF MACHINE CA.: 1,2 TO
DIMENSIONS OF THE MACHINE CA.: 1,60 X 1,30 X 1,40 M
COMMENT:
- VERTICAL ROLL SPACING = 8.50 MM
- CENTRAL OIL LUBRICATION OF THE CARDAN SHAFTS AND STRAIGHTENING ROLLER BEARINGS
- STRAIGHTENING ROLLER BEARING BRONZE
- SUPPORT ROLLER BEARINGS NADELLAGER (NEEDLE ROLLER BEARINGS)
- INLET TABLE
- OUTLET CONVEYOR BELT

2018 THE STRAIGHTENING MACHINE WAS REVIEWED AND CLEANED IN OUR FACTORY.
THE ELECTRICAL SYSTEM IS CHECKED AND THE LEVELER IS FUNCTIONAL AND PAINTING.

TESTS WITH YOUR MATERIAL CAN MAKE BY AN APPOINTMENT.




Vendedor: Frech GmbH
Año de construcción: usado
Ubicación: Land--bend tube dimensions 70 x 2 mm (material strength 400 n/mm2)
-bending sequence automatically
-maximum bending angle 180 degrees + on suspension - bending radius max 250 mm / min. 40 mm pipe inner edge
-right and left turn - bending speed max. 9.5 k rpm, adjustable
-length of pipe decking approx. 4,300 mm
-fence
-8 bending angle programmable, on decadent aster, autom. forwarding
-autom. mandrel
-counter
-repelling device for bending of frame-closed
-autom. central lubrication system
-electro-hydraulic drive 11,5 kw
-incl. bending tool (26, 9 x 2, 6 mm rm 65 mm / 33, 7 x 2, 9 mm rm 70 mm / 42, 4 x 2, 9 mm rm 75 mm / 48, 3 x 2, 9 mm rm 80 mm / 60, 3 x 2, 9 mm rm 130 mm - various arbors) - incl. steel system links spike hardened and coated for rohrdurchm. 3/4 "/ 26,44 x 1.75 mm manufactured 2017
available from april 2019
 -BEND TUBE DIMENSIONS 70 X 2 MM (MATERIAL STRENGTH 400 N/MM2) -BENDING SEQUENCE AUTOMATICALLY -MAXIMUM BENDING ANGLE 180 DEGREES + ON SUSPENSION - BENDING RADIUS MAX 250 MM / MIN. 40 MM PIPE INNER EDGE -RIGHT AND LEFT TURN - BENDING SPEED MAX. 9.5 K RPM, ADJUSTABLE -LENGTH OF PIPE DECKING APPROX. 4,300 MM -FENCE -8 BENDING ANGLE PROGRAMMABLE, ON DECADENT ASTER, AUTOM. FORWARDING -AUTOM. MANDREL -COUNTER -REPELLING DEVICE FOR BENDING OF FRAME-CLOSED -AUTOM. CENTRAL LUBRICATION SYSTEM -ELECTRO-HYDRAULIC DRIVE 11,5 KW -INCL. BENDING TOOL (26, 9 X 2, 6 MM RM 65 MM / 33, 7 X 2, 9 MM RM 70 MM / 42, 4 X 2, 9 MM RM 75 MM / 48, 3 X 2, 9 MM RM 80 MM / 60, 3 X 2, 9 MM RM 130 MM - VARIOUS ARBORS) - INCL. STEEL SYSTEM LINKS SPIKE HARDENED AND COATED FOR ROHRDURCHM. 3/4 "/ 26,44 X 1.75 MM MANUFACTURED 2017 AVAILABLE FROM APRIL 2019
Vendedor: Reinhard Klein Maschinenhandel
Año de construcción: usado
Ubicación: Land-weight approx.: 2540 kg<br/>dimensions (l x w x h) approx.: 3414 x 1338 x 1978 mm<br/>description: endress ese 225 vw / ms power generator<br> <br> commissioning 2015<br> rental kit<br> 2 125a outlets<br> insulation monitoring<br> fuel level indicator<br> <br> hours of work: 8937<br> servicing until 957h<br> <br> renewed parts:<br> battery, starter, belts, tensioner pulley<br> <br> <br> <b>you also can find a detailed description as a pdf file.</b> WEIGHT APPROX.: 2540 KG
DIMENSIONS (L X W X H) APPROX.: 3414 X 1338 X 1978 MM
DESCRIPTION: ENDRESS ESE 225 VW / MS POWER GENERATOR

COMMISSIONING 2015
RENTAL KIT
2 125A OUTLETS
INSULATION MONITORING
FUEL LEVEL INDICATOR

HOURS OF WORK: 8937
SERVICING UNTIL 957H

RENEWED PARTS:
BATTERY, STARTER, BELTS, TENSIONER PULLEY


YOU ALSO CAN FIND A DETAILED DESCRIPTION AS A PDF FILE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 14 €
Ubicación: Land-due to location resolution we sell a pallet shelf system / reverse slider system of manufacturer's ssi schã¤fer. total 12,000 pallet places available. possible subsets
height 11 metres of the plant at the time. frame depth 1050 mm, profile 100 mm wide.
conditioning can be trimmed.
trussing 3600x140x50mm with professional 2800 kg = 700 kg per pallet. 
field load up to 22 tonnes possible.
driving car load 322 tons. disassembling is running at the time. availability from immediately possible. subsets and possible sale
price per pallete according to point way from â?¬14 net
as a standard shelf. additional charge as verschieberegal + â?¬60 net DUE TO LOCATION RESOLUTION WE SELL A PALLET SHELF SYSTEM / REVERSE SLIDER SYSTEM OF MANUFACTURER'S SSI SCH&ATILDE;&CURREN;FER. TOTAL 12,000 PALLET PLACES AVAILABLE. POSSIBLE SUBSETS HEIGHT 11 METRES OF THE PLANT AT THE TIME. FRAME DEPTH 1050 MM, PROFILE 100 MM WIDE. CONDITIONING CAN BE TRIMMED. TRUSSING 3600X140X50MM WITH PROFESSIONAL 2800 KG = 700 KG PER PALLET. FIELD LOAD UP TO 22 TONNES POSSIBLE. DRIVING CAR LOAD 322 TONS. DISASSEMBLING IS RUNNING AT THE TIME. AVAILABILITY FROM IMMEDIATELY POSSIBLE. SUBSETS AND POSSIBLE SALE PRICE PER PALLETE ACCORDING TO POINT WAY FROM &ACIRC;?&NOT;14 NET AS A STANDARD SHELF. ADDITIONAL CHARGE AS VERSCHIEBEREGAL + &ACIRC;?&NOT;60 NET
Vendedor: LHS Vertriebsgesellschaft mbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.900 €
Ubicación: Land-weight approx.: 130 kg<br/>dimensions (l x w x h) approx.: 400 x 700 x 850 mm<br/>description: coordinate measuring machine<br> setting 150 x 50 mm<br> ?linear scale? tipo at 12 already assembled<br> <br> standard equipment:<br> n° 172-202 objective 10x<br> n° 515530 halogen lamp 24 v, 150 w<br> n° 930967 network cable<br> n° 510188 fuses as spare parts (5 a)<br> n° 517843 protective case<br> <br> technical data:<br> swivel screen with goniometric device (digital)<br> magnification 10x, 20x, 50x, 100x<br> magnification accuracy: ±0.1% / ±0.15%<br> xy built-in viewer resolution: 0.001 mm<br> power supply 220 v, 50 hz<br> size (width x depth x height) 500 x 693 x 1078 mm<br> weight pj-303-150: 116 kg<br> WEIGHT APPROX.: 130 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 700 X 850 MM
DESCRIPTION: COORDINATE MEASURING MACHINE
SETTING 150 X 50 MM
?LINEAR SCALE? TIPO AT 12 ALREADY ASSEMBLED

STANDARD EQUIPMENT:
N° 172-202 OBJECTIVE 10X
N° 515530 HALOGEN LAMP 24 V, 150 W
N° 930967 NETWORK CABLE
N° 510188 FUSES AS SPARE PARTS (5 A)
N° 517843 PROTECTIVE CASE

TECHNICAL DATA:
SWIVEL SCREEN WITH GONIOMETRIC DEVICE (DIGITAL)
MAGNIFICATION 10X, 20X, 50X, 100X
MAGNIFICATION ACCURACY: ±0.1% / ±0.15%
XY BUILT-IN VIEWER RESOLUTION: 0.001 MM
POWER SUPPLY 220 V, 50 HZ
SIZE (WIDTH X DEPTH X HEIGHT) 500 X 693 X 1078 MM
WEIGHT PJ-303-150: 116 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-2 tiegel:

manufacturer: heidelberg
model: crucible a4
years: 1962/1963
equipment:
available: now
location: germany
price: on request  2 TIEGEL: MANUFACTURER: HEIDELBERG MODEL: CRUCIBLE A4 YEARS: 1962/1963 EQUIPMENT: AVAILABLE: NOW LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-table-size:1050 x 650 mm<br/>workpiece height:420 mm<br/>three-axis-real value indicator:500 x 350 x 426  <br/>workpiece weight:800 kg<br/>cutting range :300 mm²/min<br/>total power requirement:9 kva 50 hz <br/>dimensions:1940 x 2300 x 2600 mm<br/>weight of the machine ca.:3460 kg <br/><br/> TABLE-SIZE:1050 X 650 MM
WORKPIECE HEIGHT:420 MM
THREE-AXIS-REAL VALUE INDICATOR:500 X 350 X 426
WORKPIECE WEIGHT:800 KG
CUTTING RANGE :300 MM²/MIN
TOTAL POWER REQUIREMENT:9 KVA 50 HZ
DIMENSIONS:1940 X 2300 X 2600 MM
WEIGHT OF THE MACHINE CA.:3460 KG

Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-comprising:

heidelberg eurobind 600 pur
1 clamp adhesive binder back gluing: pure jet application system
page gluing: eva hotmelt roller

high efficiency for runs up to 2,500 copies
envelope pressure station
optical security system in the loading
band display
ease of use, short setup time

performance: approx. 600 cycles/h

block formats:
-block thickness: 2-50 mm
-block width: 120-320 mm
-block height: 120-440 mm
-signature paper weight: 60-170 g / qm

envelope sizes:
-envelope width: 242-710 mm
-envelope height: 120-440 mm
-envelope basis weight: 120-300 g / qm

back editing station:
milling depth: 0 3 mm

horizontal cover feeder:
stack height: max 150 mm
groove: dual or quad
back groove to ornamental groove distance: 6 mm

eu power supply: 400v, 50 hz, 3-phase + n + pe / 18 (20a) / 9, 9kva

compressed air supply:
working pressure: 6 bar
compressed air consumption: 250nl/min (oil - and water-free)

dimensions: 3100x2290x1325mm (lxwxh)
weight: 1050kg

on request, we can organize for you the following points:

packing, loading, transport (by ship or airplane) including customs clearance COMPRISING: HEIDELBERG EUROBIND 600 PUR 1 CLAMP ADHESIVE BINDER BACK GLUING: PURE JET APPLICATION SYSTEM PAGE GLUING: EVA HOTMELT ROLLER HIGH EFFICIENCY FOR RUNS UP TO 2,500 COPIES ENVELOPE PRESSURE STATION OPTICAL SECURITY SYSTEM IN THE LOADING BAND DISPLAY EASE OF USE, SHORT SETUP TIME PERFORMANCE: APPROX. 600 CYCLES/H BLOCK FORMATS: -BLOCK THICKNESS: 2-50 MM -BLOCK WIDTH: 120-320 MM -BLOCK HEIGHT: 120-440 MM -SIGNATURE PAPER WEIGHT: 60-170 G / QM ENVELOPE SIZES: -ENVELOPE WIDTH: 242-710 MM -ENVELOPE HEIGHT: 120-440 MM -ENVELOPE BASIS WEIGHT: 120-300 G / QM BACK EDITING STATION: MILLING DEPTH: 0 3 MM HORIZONTAL COVER FEEDER: STACK HEIGHT: MAX 150 MM GROOVE: DUAL OR QUAD BACK GROOVE TO ORNAMENTAL GROOVE DISTANCE: 6 MM EU POWER SUPPLY: 400V, 50 HZ, 3-PHASE + N + PE / 18 (20A) / 9, 9KVA COMPRESSED AIR SUPPLY: WORKING PRESSURE: 6 BAR COMPRESSED AIR CONSUMPTION: 250NL/MIN (OIL - AND WATER-FREE) DIMENSIONS: 3100X2290X1325MM (LXWXH) WEIGHT: 1050KG ON REQUEST, WE CAN ORGANIZE FOR YOU THE FOLLOWING POINTS: PACKING, LOADING, TRANSPORT (BY SHIP OR AIRPLANE) INCLUDING CUSTOMS CLEARANCE
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Ubicación: Land-table-model with movable table\r\nworking width 400 mm, thickness 10 mm,\r\nlubrication system for the knives TABLE-MODEL WITH MOVABLE TABLE\R\NWORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-make: citizen
model: e32 cnc sliding head lathe
year: 1990
condition: used
machine type: lathe 
location of machine: belgium

machine details
year of manufacture: 1990,
control:mitsubishi,
bar capacity: 32 mm,
main spindle speed: 130-6000 rpm,
with sub spindle,
maximum machining length: 320 mm,
main spindle motor drive: 7.5 hp,
twin c-axis and live tooling,
iemca magazine barloader. MAKE: CITIZEN MODEL: E32 CNC SLIDING HEAD LATHE YEAR: 1990 CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: BELGIUM MACHINE DETAILS YEAR OF MANUFACTURE: 1990, CONTROL:MITSUBISHI, BAR CAPACITY: 32 MM, MAIN SPINDLE SPEED: 130-6000 RPM, WITH SUB SPINDLE, MAXIMUM MACHINING LENGTH: 320 MM, MAIN SPINDLE MOTOR DRIVE: 7.5 HP, TWIN C-AXIS AND LIVE TOOLING, IEMCA MAGAZINE BARLOADER.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-modell 650.460.11.35.20, semi automatic\r\nworking width 460 mm, thickness 11 mm,\r\nlubrication system for the knives\r\n MODELL 650.460.11.35.20, SEMI AUTOMATIC\R\NWORKING WIDTH 460 MM, THICKNESS 11 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-uteco gold rr 612, 1994
ref.nr: 2588 manufacturer uteco model gold rr 612 year built: 1994 speed: 50-200 m / min max sheet size: 1300 mm availability: immediately condition: good price: on technical request spezification: â?¢ 6 stack colour printing unit with drying system + 1 addi internationally stack unit for varnish with drying system
â?¢ cutting unit before unwinder
â?¢ the drying system is electrical
â?¢ printing repeat (min/max): 300 mm / 1200 mm
â?¢ max printing width: 1300 mm
â?¢ max printing material: 1350 mm
â?¢ maximum speed: 150-200 m / min depending on material quality and desired printing quality
 UTECO GOLD RR 612, 1994 REF.NR: 2588 MANUFACTURER UTECO MODEL GOLD RR 612 YEAR BUILT: 1994 SPEED: 50-200 M / MIN MAX SHEET SIZE: 1300 MM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; 6 STACK COLOUR PRINTING UNIT WITH DRYING SYSTEM + 1 ADDI INTERNATIONALLY STACK UNIT FOR VARNISH WITH DRYING SYSTEM &ACIRC;?&CENT; CUTTING UNIT BEFORE UNWINDER &ACIRC;?&CENT; THE DRYING SYSTEM IS ELECTRICAL &ACIRC;?&CENT; PRINTING REPEAT (MIN/MAX): 300 MM / 1200 MM &ACIRC;?&CENT; MAX PRINTING WIDTH: 1300 MM &ACIRC;?&CENT; MAX PRINTING MATERIAL: 1350 MM &ACIRC;?&CENT; MAXIMUM SPEED: 150-200 M / MIN DEPENDING ON MATERIAL QUALITY AND DESIRED PRINTING QUALITY
Vendedor: PP Lion Trade e.K.
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2002 

injection unit: vc 330/...
screw diameter: 35 mm 
injection pressure: 1600 bar 
injection volume: 154 ccm 
shot capacity: 144 g 

clamping unit: .../110
clamping force: 110 t 
platen size: 740 x 680 mm 
distance between tie bars: . mm 
mould height: 300 mm 
opening storke: 500 mm 
max.daylight: 800 mm 
ejector stroke: 130 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,4 x 1,5 x 2,1 m 
weight: 7.300 kg 

equipment:
- 2 x core pulls ( extensions to 3 core pulls ) 
- 3 x pneumatic valve
- incl. second injection unit (screw diameter 25 mm) MACHINE SPECIFICATION YEAR: 2002 INJECTION UNIT: VC 330/... SCREW DIAMETER: 35 MM INJECTION PRESSURE: 1600 BAR INJECTION VOLUME: 154 CCM SHOT CAPACITY: 144 G CLAMPING UNIT: .../110 CLAMPING FORCE: 110 T PLATEN SIZE: 740 X 680 MM DISTANCE BETWEEN TIE BARS: . MM MOULD HEIGHT: 300 MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 800 MM EJECTOR STROKE: 130 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,4 X 1,5 X 2,1 M WEIGHT: 7.300 KG EQUIPMENT: - 2 X CORE PULLS ( EXTENSIONS TO 3 CORE PULLS ) - 3 X PNEUMATIC VALVE - INCL. SECOND INJECTION UNIT (SCREW DIAMETER 25 MM)
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives SEMI AUTOMATIC, WORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350... mm 
opening storke: 425 mm 
max.daylight: 1200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350... MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear SIZES FROM 5 KG DOUGH/7 LTR. UNTIL 60 KG/75 LTR.\R\N1 SPEED (OPTIONAL WITH 2 SPEEDS), WHITE PAINTED STEEL BODY, BOWL + SPIRAL + DOUGH DEFLECTOR + SAFETY RACK MADE OF STAINLESS STEEL\R\NBOWL IS COUNTERROTATING (OPTIONAL WITH REMOVABLE BOWL)\R\NCHAIN DRIVE, SELF-OILING STEP-DOWN-GEAR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-type of machine: universal milling machine,.
manufacturer: malick and walkows,
year of construction: approx. 1965,.
condition: good,.
type of offer: used machine,
 .,.	
technical data:.
table: 1200 x 250 mm,
speed: 35-1420 rpm,.
spindle retainer: mk4
paths:.
x = 900 mm,.
y = 270 mm,
z = 550 mm,
drive: 1.5/2.6 kw,
note: several accessories,
weight: 1500 kg
 .,.
the machine is in a good shape and ready for operation. it can be visited and demonstrated at our location. .,.
  .,.
we will be pleased if you take an interest in our offer. .,.
  TYPE OF MACHINE: UNIVERSAL MILLING MACHINE,. MANUFACTURER: MALICK AND WALKOWS, YEAR OF CONSTRUCTION: APPROX. 1965,. CONDITION: GOOD,. TYPE OF OFFER: USED MACHINE, .,. TECHNICAL DATA:. TABLE: 1200 X 250 MM, SPEED: 35-1420 RPM,. SPINDLE RETAINER: MK4 PATHS:. X = 900 MM,. Y = 270 MM, Z = 550 MM, DRIVE: 1.5/2.6 KW, NOTE: SEVERAL ACCESSORIES, WEIGHT: 1500 KG .,. THE MACHINE IS IN A GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION. .,. .,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER. .,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-type allzweck 80,  oil  lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity  290 slices/min. TYPE ALLZWECK 80, OIL LUBRICATION SLICER BLADE\R\NMOON SHAPED BLADE, THICKNESS ADJUSTABLE APPROX. 2,5 - 10 MM\R\NCAPACITY 290 SLICES/MIN.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-type of machine: universal milling machine,.
manufacturer: vibos
year of construction: approx. 1985.
condition: very good,.
type of offer: used machine,
  .,.	
technical data:.
table: 1100 x 255 mm,
speeds: 60-1200 rpm,.
spindle retainer: sk40
paths:.
x = 750 mm,.
y = 250 mm,
z = 470 mm,.
drive: 3.0 kw,
comment:.
with 3-axis digital display,.
coolant system,
a lot of accessories,
weight: 1200 kg
 .,.
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location. .,.
 .,.
we will be pleased if you take an interest in our offer .,.
  TYPE OF MACHINE: UNIVERSAL MILLING MACHINE,. MANUFACTURER: VIBOS YEAR OF CONSTRUCTION: APPROX. 1985. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, .,. TECHNICAL DATA:. TABLE: 1100 X 255 MM, SPEEDS: 60-1200 RPM,. SPINDLE RETAINER: SK40 PATHS:. X = 750 MM,. Y = 250 MM, Z = 470 MM,. DRIVE: 3.0 KW, COMMENT:. WITH 3-AXIS DIGITAL DISPLAY,. COOLANT SYSTEM, A LOT OF ACCESSORIES, WEIGHT: 1200 KG .,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION. .,. .,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER .,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-type 28 m / 50 / oil, lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity  220 slices/min. TYPE 28 M / 50 / OIL, LUBRICATION SLICER BLADE\R\NMOON SHAPED BLADE, THICKNESS ADJUSTABLE APPROX. 2,5 - 10 MM\R\NCAPACITY 220 SLICES/MIN.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-many thanks for your interest in our machinery, please find below our offer:

manufacturer	: k&s krüger & salecker
type		: mfs 201
year		: 2002
working width	: max Ø 70 mm
electr. data	: 1,5 kw 16a
output		: in depend of the size and product 50 bis 250 kg/h
different	: mit guilotine / with guilotine
9 different nozzles
round: 15, 25, 40, 50 mm
rectangle: 5 x 4, , 6 x 4 cm, 
10 x 5, 7 x 2,5 cm rechteckig, 10 x 5, 7 x 2,5 cm mit radius)

we offer this machine in 'as is' condition, without warranty 

ex location netherlands
 MANY THANKS FOR YOUR INTEREST IN OUR MACHINERY, PLEASE FIND BELOW OUR OFFER: MANUFACTURER : K&S KRüGER & SALECKER TYPE : MFS 201 YEAR : 2002 WORKING WIDTH : MAX Ø 70 MM ELECTR. DATA : 1,5 KW 16A OUTPUT : IN DEPEND OF THE SIZE AND PRODUCT 50 BIS 250 KG/H DIFFERENT : MIT GUILOTINE / WITH GUILOTINE 9 DIFFERENT NOZZLES ROUND: 15, 25, 40, 50 MM RECTANGLE: 5 X 4, , 6 X 4 CM, 10 X 5, 7 X 2,5 CM RECHTECKIG, 10 X 5, 7 X 2,5 CM MIT RADIUS) WE OFFER THIS MACHINE IN 'AS IS' CONDITION, WITHOUT WARRANTY EX LOCATION NETHERLANDS
Vendedor: Peter Heidenreich Maschinenhandel
Año de construcción: usado
Ubicación: Land-rounding length  2550 mm\r\neach belt extra motor \r\nbelt width 160 mm, incl. fan for hot air ROUNDING LENGTH 2550 MM\R\NEACH BELT EXTRA MOTOR \R\NBELT WIDTH 160 MM, INCL. FAN FOR HOT AIR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-elb flat sanding machine, magnetic plate 300 x 500, functional ELB FLAT SANDING MACHINE, MAGNETIC PLATE 300 X 500, FUNCTIONAL
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-automatic, working width 420 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n AUTOMATIC, WORKING WIDTH 420 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine type: hand sheet scissors (deckelschere),
year: approx. 1970.
condition: very good,.
type of offer: used machine,
.,.	
technical data:, 
performance in mm: 1100 x 1.0 mm.
drive type: manually,
comment:.
rip fence,
hold down clamp,
weight: 300 kg
 .,.
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location. .,.
  .,.
we will be pleased if you take an interest in our offer. .,.
  MACHINE TYPE: HAND SHEET SCISSORS (DECKELSCHERE), YEAR: APPROX. 1970. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, .,. TECHNICAL DATA:, PERFORMANCE IN MM: 1100 X 1.0 MM. DRIVE TYPE: MANUALLY, COMMENT:. RIP FENCE, HOLD DOWN CLAMP, WEIGHT: 300 KG .,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION. .,. .,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER. .,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-two trapezoidal profiling machines and mobile coilanlage.
the machines produce daily. 

trapezoidal sheet roll forming machine 1
brand: werkcon line on weaver base
year of construction: 2003
dimensions: 15 m long x 1.8 m wide
application:
profile: 35/1035 wall, 35/1035 roof, condensation felt installation.

trapezoidal sheet roll forming machine 2
brand: werkcon line & base
year of construction: 1998
dimensions: 15 m long x 1.8 m wide
profile: 19/1000 wall, 19/1000 roof

coilanlage:
dimensions: 4.7 m long x 1.2 m wide
maximum coil weight 5000 kg

500kg crane to lift the anti-condensing felt rolls on the line

the complex can be visited under production conditions and available at short notice. TWO TRAPEZOIDAL PROFILING MACHINES AND MOBILE COILANLAGE. THE MACHINES PRODUCE DAILY. TRAPEZOIDAL SHEET ROLL FORMING MACHINE 1 BRAND: WERKCON LINE ON WEAVER BASE YEAR OF CONSTRUCTION: 2003 DIMENSIONS: 15 M LONG X 1.8 M WIDE APPLICATION: PROFILE: 35/1035 WALL, 35/1035 ROOF, CONDENSATION FELT INSTALLATION. TRAPEZOIDAL SHEET ROLL FORMING MACHINE 2 BRAND: WERKCON LINE & BASE YEAR OF CONSTRUCTION: 1998 DIMENSIONS: 15 M LONG X 1.8 M WIDE PROFILE: 19/1000 WALL, 19/1000 ROOF COILANLAGE: DIMENSIONS: 4.7 M LONG X 1.2 M WIDE MAXIMUM COIL WEIGHT 5000 KG 500KG CRANE TO LIFT THE ANTI-CONDENSING FELT ROLLS ON THE LINE THE COMPLEX CAN BE VISITED UNDER PRODUCTION CONDITIONS AND AVAILABLE AT SHORT NOTICE.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 300.000 EU€
Ubicación: Land-the promotional price is valid for 60 days (until 15/06/2018). THE PROMOTIONAL PRICE IS VALID FOR 60 DAYS (UNTIL 15/06/2018).
Vendedor: Kennedy Machines
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more CAT types: