67 ofertas

Año de construcción: usado
Precio: 95.000 €
Ubicación: Land-1.	loading belt conveyor (3.500) with inverter, controlled by and synchronized with the speed of the robot pos.5
2.	panel cleaning machine for top and bottom sides and edges our type g95/24
•	ex-proof electrical motors, electrical switchboard on the machine ip.55
3.	triangular bars conveyor for manual stain retouch, double speed complete with photocells, total length 7.000mm.  with automatic and manual control
4.	composition conveyor, with two speeds controlled by photocells 4.500mm long
•	preheating hood equipped with 3 irm lamps, 3,25 kw. each one, recommended to ensure a reasonable temperature on the panel surface to ensure a better floating of the lacquer sprayed on the panel
•	pressurized pre-chamber, directly supplied by the air make unit of the robot room pos.5
•	top fix de-ionizing blowing bar with 20 nozzles
5.	6 axes robotech gs/25 steel belt na 1500 
•	pressurized cabinet with air make-up unit, cleaning box type, to filtrate and supply air into the cabinet of the machine and pressurize it.
•	automatic washing of the guns heads by means of nylon spiral brush started by pneumatic motor
•	reciprocating head for 4 guns
•	scrubber with sludge collection into non-returnable bags
•	steam battery with stainless steel pipes
•	second spray circuit
6-7	flash-off tunnel, with hot air and 126 tlm low pressure uv-lamps consisting of:
•	straight conveying system for a total length of 6.500 mm
•	180° conical rollers curve, average radius 3.500mm.  the curve will be covered with a flash-off hood
•	linear bar conveyor, pitch 100mm, 24.00mm. long, also covered with flash off hood, including in the final part 126 tlm lamps 140 watt each
•	•	ex-proof motors and spark proof fans
8.	uv curing tunnel our type gst 1500/4 - 3d type (2 x ga 80 watt + 2 x mc 80 watt) + 1400/1 for the lower side installed on a transpor11.500mm long .  gallium lamps for the curing of pigmented lacquers. 

cefla finishing, superfici, venjacob. 
can be split to make smaller line if required
in like new condition - only used occasionally. can be seen working.   
price is ex works, monaghan, ireland. purchaser is responsible for dismantling, loading & shipping. 1. LOADING BELT CONVEYOR (3.500) WITH INVERTER, CONTROLLED BY AND SYNCHRONIZED WITH THE SPEED OF THE ROBOT POS.5 2. PANEL CLEANING MACHINE FOR TOP AND BOTTOM SIDES AND EDGES OUR TYPE G95/24 • EX-PROOF ELECTRICAL MOTORS, ELECTRICAL SWITCHBOARD ON THE MACHINE IP.55 3. TRIANGULAR BARS CONVEYOR FOR MANUAL STAIN RETOUCH, DOUBLE SPEED COMPLETE WITH PHOTOCELLS, TOTAL LENGTH 7.000MM. WITH AUTOMATIC AND MANUAL CONTROL 4. COMPOSITION CONVEYOR, WITH TWO SPEEDS CONTROLLED BY PHOTOCELLS 4.500MM LONG • PREHEATING HOOD EQUIPPED WITH 3 IRM LAMPS, 3,25 KW. EACH ONE, RECOMMENDED TO ENSURE A REASONABLE TEMPERATURE ON THE PANEL SURFACE TO ENSURE A BETTER FLOATING OF THE LACQUER SPRAYED ON THE PANEL • PRESSURIZED PRE-CHAMBER, DIRECTLY SUPPLIED BY THE AIR MAKE UNIT OF THE ROBOT ROOM POS.5 • TOP FIX DE-IONIZING BLOWING BAR WITH 20 NOZZLES 5. 6 AXES ROBOTECH GS/25 STEEL BELT NA 1500 • PRESSURIZED CABINET WITH AIR MAKE-UP UNIT, CLEANING BOX TYPE, TO FILTRATE AND SUPPLY AIR INTO THE CABINET OF THE MACHINE AND PRESSURIZE IT. • AUTOMATIC WASHING OF THE GUNS HEADS BY MEANS OF NYLON SPIRAL BRUSH STARTED BY PNEUMATIC MOTOR • RECIPROCATING HEAD FOR 4 GUNS • SCRUBBER WITH SLUDGE COLLECTION INTO NON-RETURNABLE BAGS • STEAM BATTERY WITH STAINLESS STEEL PIPES • SECOND SPRAY CIRCUIT 6-7 FLASH-OFF TUNNEL, WITH HOT AIR AND 126 TLM LOW PRESSURE UV-LAMPS CONSISTING OF: • STRAIGHT CONVEYING SYSTEM FOR A TOTAL LENGTH OF 6.500 MM • 180° CONICAL ROLLERS CURVE, AVERAGE RADIUS 3.500MM. THE CURVE WILL BE COVERED WITH A FLASH-OFF HOOD • LINEAR BAR CONVEYOR, PITCH 100MM, 24.00MM. LONG, ALSO COVERED WITH FLASH OFF HOOD, INCLUDING IN THE FINAL PART 126 TLM LAMPS 140 WATT EACH • • EX-PROOF MOTORS AND SPARK PROOF FANS 8. UV CURING TUNNEL OUR TYPE GST 1500/4 - 3D TYPE (2 X GA 80 WATT + 2 X MC 80 WATT) + 1400/1 FOR THE LOWER SIDE INSTALLED ON A TRANSPOR11.500MM LONG . GALLIUM LAMPS FOR THE CURING OF PIGMENTED LACQUERS. CEFLA FINISHING, SUPERFICI, VENJACOB. CAN BE SPLIT TO MAKE SMALLER LINE IF REQUIRED IN LIKE NEW CONDITION - ONLY USED OCCASIONALLY. CAN BE SEEN WORKING. PRICE IS EX WORKS, MONAGHAN, IRELAND. PURCHASER IS RESPONSIBLE FOR DISMANTLING, LOADING & SHIPPING.
Vendedor: John E Coyle Furniture
Año de construcción: usado
Ubicación: Land-length x useful width: 3,50 x 1,30 m.<br/>height adjustable +/- 90 cm LENGTH X USEFUL WIDTH: 3,50 X 1,30 M.
HEIGHT ADJUSTABLE +/- 90 CM
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-integrated painting system for varnishing and drying for uv coatings frames, rails, boards and linear profiles

workpiece length of min. 600 mm workpiece width of 150 mm
workpiece height of max. 50 mm
feed speed 12,5-80 m / min
average operating speed of 25-50 m / min
injection unit suction fan 1.1 kw infeed conveyor low-pressure chamber in which the product is injected
spray guns conveyor rollers in splash zone enclosure for the pumps uv lamp holder uv drying unit lights up 3 x 7.5 kw
uv lamp 1 x 3 kw conveyor system with chromed swivel bars suction from the bottom - and inlet air system to cool down the lamp
supply air fan outlet conveyor 2,2 kw / 2500 mâ³/h
exhaust fan 2,2 kw / 2500 mâ³/h
compressed air 6 bar
connection value total kw 33
dimensions 6500 x 1600 x 2860 mm + cabinet weight 3300 kg 550 kg cabinet
site 32683 barntrup

(errors and omissions in the technical data as well as subject to prior sale)
 INTEGRATED PAINTING SYSTEM FOR VARNISHING AND DRYING FOR UV COATINGS FRAMES, RAILS, BOARDS AND LINEAR PROFILES WORKPIECE LENGTH OF MIN. 600 MM WORKPIECE WIDTH OF 150 MM WORKPIECE HEIGHT OF MAX. 50 MM FEED SPEED 12,5-80 M / MIN AVERAGE OPERATING SPEED OF 25-50 M / MIN INJECTION UNIT SUCTION FAN 1.1 KW INFEED CONVEYOR LOW-PRESSURE CHAMBER IN WHICH THE PRODUCT IS INJECTED SPRAY GUNS CONVEYOR ROLLERS IN SPLASH ZONE ENCLOSURE FOR THE PUMPS UV LAMP HOLDER UV DRYING UNIT LIGHTS UP 3 X 7.5 KW UV LAMP 1 X 3 KW CONVEYOR SYSTEM WITH CHROMED SWIVEL BARS SUCTION FROM THE BOTTOM - AND INLET AIR SYSTEM TO COOL DOWN THE LAMP SUPPLY AIR FAN OUTLET CONVEYOR 2,2 KW / 2500 M&ACIRC;&SUP3;/H EXHAUST FAN 2,2 KW / 2500 M&ACIRC;&SUP3;/H COMPRESSED AIR 6 BAR CONNECTION VALUE TOTAL KW 33 DIMENSIONS 6500 X 1600 X 2860 MM + CABINET WEIGHT 3300 KG 550 KG CABINET SITE 32683 BARNTRUP (ERRORS AND OMISSIONS IN THE TECHNICAL DATA AS WELL AS SUBJECT TO PRIOR SALE)
Vendedor: GROMAR Mariola Groyecki
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 10500 x 1900 x 2500 mm<br/>description: serial number 01296/7, total installed power 3.15 kw, working width approx. 1350 mm, maximum workpiece thickness 80 mm, drying with hot air, heat with automatic temperature control WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 10500 X 1900 X 2500 MM
DESCRIPTION: SERIAL NUMBER 01296/7, TOTAL INSTALLED POWER 3.15 KW, WORKING WIDTH APPROX. 1350 MM, MAXIMUM WORKPIECE THICKNESS 80 MM, DRYING WITH HOT AIR, HEAT WITH AUTOMATIC TEMPERATURE CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-

position 1052_10
uv drying cefla, type uv bb8 / 4 / r (4 lamps)

total machine length: 5500 mm
overall width: 2492 mm
max. working width: 1350 mm
max. processing height: 70 mm
min. machining length: 400 mm
2 modules each with 2 uv lamps
total number of uv lamps 4 pcs
efficiency of 1 lamp about 100 w / cm2:
energy consumption of 1 lamp approx. 11 kw
radiant length: 1445 mm
total power requirement: 49 kw
cooling fan: 2 x 900 m³ / h
fan power: 2 x 2.2 kw
rotating radiators: electro-pneumatic system
separate control cabinet:
van transporter:
length: 5000 + lowered / raised flap 500 mm
working width: 1400 mm
working height from substrate: 860 - 940 mm
conveyor pins: diameter 40 mm, graduation 100 mm
feed: 0.65 kw
feed speed: 2.2 - 19.4 m / min
power supply voltage: 400 v, ac, 50 hz, 3 phasen
total machine power: 49 kw
weight: approx. 2000 kg
location: gdansk / poland

(subject to technical errors/modifications and prior sale)
 POSITION 1052_10 UV DRYING CEFLA, TYPE UV BB8 / 4 / R (4 LAMPS) TOTAL MACHINE LENGTH: 5500 MM OVERALL WIDTH: 2492 MM MAX. WORKING WIDTH: 1350 MM MAX. PROCESSING HEIGHT: 70 MM MIN. MACHINING LENGTH: 400 MM 2 MODULES EACH WITH 2 UV LAMPS TOTAL NUMBER OF UV LAMPS 4 PCS EFFICIENCY OF 1 LAMP ABOUT 100 W / CM2: ENERGY CONSUMPTION OF 1 LAMP APPROX. 11 KW RADIANT LENGTH: 1445 MM TOTAL POWER REQUIREMENT: 49 KW COOLING FAN: 2 X 900 M³ / H FAN POWER: 2 X 2.2 KW ROTATING RADIATORS: ELECTRO-PNEUMATIC SYSTEM SEPARATE CONTROL CABINET: VAN TRANSPORTER: LENGTH: 5000 + LOWERED / RAISED FLAP 500 MM WORKING WIDTH: 1400 MM WORKING HEIGHT FROM SUBSTRATE: 860 - 940 MM CONVEYOR PINS: DIAMETER 40 MM, GRADUATION 100 MM FEED: 0.65 KW FEED SPEED: 2.2 - 19.4 M / MIN POWER SUPPLY VOLTAGE: 400 V, AC, 50 HZ, 3 PHASEN TOTAL MACHINE POWER: 49 KW WEIGHT: APPROX. 2000 KG LOCATION: GDANSK / POLAND (SUBJECT TO TECHNICAL ERRORS/MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, year: ca.2003, work piece width min-max mm: 10-1300, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 5-60, kw power 1 lamp: ca.10, kw power all lamps: 30, lampen schräg eingebaut: 2, lampen gerade eingebaut: 1, adjustable: yes, power per lamp watt uv: 120, conveyor lenght mm: ca.3000, feeding speed m/min: 3-5, drive power kw: 0,75, exhaust air diameter mm: 3, year :ca.2003 MANUFACTURER: CEFLA, YEAR: CA.2003, WORK PIECE WIDTH MIN-MAX MM: 10-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 5-60, KW POWER 1 LAMP: CA.10, KW POWER ALL LAMPS: 30, LAMPEN SCHRäG EINGEBAUT: 2, LAMPEN GERADE EINGEBAUT: 1, ADJUSTABLE: YES, POWER PER LAMP WATT UV: 120, CONVEYOR LENGHT MM: CA.3000, FEEDING SPEED M/MIN: 3-5, DRIVE POWER KW: 0,75, EXHAUST AIR DIAMETER MM: 3, YEAR :CA.2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-uv drying cefla, type tlf/3l 80w (3 lamps)

total machine length: 4500 mm
overall width: 2492 mm
max. working width: 1350 mm
max. processing height: 70 mm
min. machining length: 400 mm
2 modules (with 2 uv lamps + 1 uv lamp)
total number of uv lamps 3 pcs
efficiency of 1 lamp about 80 w / cm2:
energy consumption of 1 lamp approx. 11 kw
radiant length: 1445 mm

cooling fan: 2 x 900 m³ / h
fan power: 2 x 2.2 kw
rotating radiators: electro-pneumatic system
separate control cabinet:
van transporter:
length: 4000 + lowered / raised flap 500 mm
working width: 1400 mm
working height from substrate: 860 - 940 mm
conveyor pins: diameter 40 mm, graduation 100 mm
feed: 0.65 kw
feed speed: 2.2 - 20 m / min
power supply voltage: 400 v, ac, 50 hz, 3 phasen
total machine power: 38 kw
weight: approx. 2000 kg
location: gdansk / poland

(subject to technical errors/modifications and prior sale)
 UV DRYING CEFLA, TYPE TLF/3L 80W (3 LAMPS) TOTAL MACHINE LENGTH: 4500 MM OVERALL WIDTH: 2492 MM MAX. WORKING WIDTH: 1350 MM MAX. PROCESSING HEIGHT: 70 MM MIN. MACHINING LENGTH: 400 MM 2 MODULES (WITH 2 UV LAMPS + 1 UV LAMP) TOTAL NUMBER OF UV LAMPS 3 PCS EFFICIENCY OF 1 LAMP ABOUT 80 W / CM2: ENERGY CONSUMPTION OF 1 LAMP APPROX. 11 KW RADIANT LENGTH: 1445 MM COOLING FAN: 2 X 900 M³ / H FAN POWER: 2 X 2.2 KW ROTATING RADIATORS: ELECTRO-PNEUMATIC SYSTEM SEPARATE CONTROL CABINET: VAN TRANSPORTER: LENGTH: 4000 + LOWERED / RAISED FLAP 500 MM WORKING WIDTH: 1400 MM WORKING HEIGHT FROM SUBSTRATE: 860 - 940 MM CONVEYOR PINS: DIAMETER 40 MM, GRADUATION 100 MM FEED: 0.65 KW FEED SPEED: 2.2 - 20 M / MIN POWER SUPPLY VOLTAGE: 400 V, AC, 50 HZ, 3 PHASEN TOTAL MACHINE POWER: 38 KW WEIGHT: APPROX. 2000 KG LOCATION: GDANSK / POLAND (SUBJECT TO TECHNICAL ERRORS/MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: rollgang, year: ca.2003, working widht mm: 1350, total hight mm: 920, adjustable: yes, roller pitch mm: ca220, roller diameter: 80, side-driven guide belt: schiene, feeding speed min-max m/min: 3-5, drive adjustable: yes, working widht mm: 1350, width total mm: 1600, year :ca.2003 MANUFACTURER: CEFLA, TYPE: ROLLGANG, YEAR: CA.2003, WORKING WIDHT MM: 1350, TOTAL HIGHT MM: 920, ADJUSTABLE: YES, ROLLER PITCH MM: CA220, ROLLER DIAMETER: 80, SIDE-DRIVEN GUIDE BELT: SCHIENE, FEEDING SPEED MIN-MAX M/MIN: 3-5, DRIVE ADJUSTABLE: YES, WORKING WIDHT MM: 1350, WIDTH TOTAL MM: 1600, YEAR :CA.2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-high performance uv + ir dryer cefla, type uv2000 + ef

total length of the dryer	5500 mm
overall width	2492 mm
max. workpiece width	1300 mm
max. workpiece thickness	70 mm
min. workpiece length	400 mm

1 module with uv spotlight	year 2006, typ uv 2000
lamp review	
80 w / cm2	11,4 kw
100 w / cm2	14,3 kw
120 w / cm2	17,2 kw
power control of the lamp	durch potentiometer
beam length	1445 mm
power requirement	18,3 kw (bei 120w/cm2) 
cooling fan	900 m³/h
power	0,55 kw
compressed air consumption	2 nl/zyklus
tilting device of spotlights	elektro- pneumatisch system
separate control cabinet	

ir infrared dryer with control cabinettyp ef
length of the dryer module	1000 mm
ir spotlights (lamps)	4 pcs.
ventilation system with fan	0,75 kw
overall performance	12 kw
separate control cabinet	

bar conveyor	typ: ef 55/10/t/su
overall length	5000 + foldable 500 mm
working width	1300 mm
working height	860 – 940 mm
transport rods	diameter 25 mm, graduation 95 mm
feed	0,65 kw
feed rate	2,2 – 29,4 m/min
operating voltage	400 v, ac, 50 hz, 3 phasen
total power complete machine	approx. 31 kw
mass	approx. 2200 kg
location gdansk

(subject to technical errors/modifications and prior sale)
 HIGH PERFORMANCE UV + IR DRYER CEFLA, TYPE UV2000 + EF TOTAL LENGTH OF THE DRYER 5500 MM OVERALL WIDTH 2492 MM MAX. WORKPIECE WIDTH 1300 MM MAX. WORKPIECE THICKNESS 70 MM MIN. WORKPIECE LENGTH 400 MM 1 MODULE WITH UV SPOTLIGHT YEAR 2006, TYP UV 2000 LAMP REVIEW 80 W / CM2 11,4 KW 100 W / CM2 14,3 KW 120 W / CM2 17,2 KW POWER CONTROL OF THE LAMP DURCH POTENTIOMETER BEAM LENGTH 1445 MM POWER REQUIREMENT 18,3 KW (BEI 120W/CM2) COOLING FAN 900 M³/H POWER 0,55 KW COMPRESSED AIR CONSUMPTION 2 NL/ZYKLUS TILTING DEVICE OF SPOTLIGHTS ELEKTRO- PNEUMATISCH SYSTEM SEPARATE CONTROL CABINET IR INFRARED DRYER WITH CONTROL CABINETTYP EF LENGTH OF THE DRYER MODULE 1000 MM IR SPOTLIGHTS (LAMPS) 4 PCS. VENTILATION SYSTEM WITH FAN 0,75 KW OVERALL PERFORMANCE 12 KW SEPARATE CONTROL CABINET BAR CONVEYOR TYP: EF 55/10/T/SU OVERALL LENGTH 5000 + FOLDABLE 500 MM WORKING WIDTH 1300 MM WORKING HEIGHT 860 – 940 MM TRANSPORT RODS DIAMETER 25 MM, GRADUATION 95 MM FEED 0,65 KW FEED RATE 2,2 – 29,4 M/MIN OPERATING VOLTAGE 400 V, AC, 50 HZ, 3 PHASEN TOTAL POWER COMPLETE MACHINE APPROX. 31 KW MASS APPROX. 2200 KG LOCATION GDANSK (SUBJECT TO TECHNICAL ERRORS/MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: rollgang angetrieben, working widht mm: 135, total hight mm: 920, adjustable: yes, roller pitch mm: ca.220, stop straightedge: yes, feeding speed min-max m/min: 3-5, drive adjustable: yes, working widht mm: 135, drive power kw: ca.0,5, MANUFACTURER: CEFLA, TYPE: ROLLGANG ANGETRIEBEN, WORKING WIDHT MM: 135, TOTAL HIGHT MM: 920, ADJUSTABLE: YES, ROLLER PITCH MM: CA.220, STOP STRAIGHTEDGE: YES, FEEDING SPEED MIN-MAX M/MIN: 3-5, DRIVE ADJUSTABLE: YES, WORKING WIDHT MM: 135, DRIVE POWER KW: CA.0,5,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-twin head roller coater with reverse doctor rollers cefla sorbini model.: smartcoater reverse mf,  year.: 2006
twin head roller coater with second application roller reverse, to apply high viscosity sealers.  machine equipped with oscillating and motorized scrapers.

machine: - no.	mr2trf26117
free-moving machine on wheels	for withdrawal from the line or individually
working width	1350 mm
transport width (rollers)	1330 mm
first head	
1 chromed dosing roller	173 mm diameter
1 rubberized application roller	248 mm diameter
second head „reverse“	
1 chromed dosing roller	173 mm diameter
1 rubberized application roller	248 mm diameter
quick-change system	of the order roll
workpiece length	min 300 mm
feed	4 - 20 m / min, electronically infinitely variable
working height above floor approx.	880 – 940 mm
transmission height, platen thickness	3 - 100 mm
motorized height adjustment	via push button on the control panel
paint circulation	with double membrane pump
operating side	right
swiveling hanging desk	for machine control
free standing electrical cabinet on drive side	cable connection from machine to control cabinet via cable loop
power consumption	5.4 kw
operating voltage	400 v, ac, 50 hz, 3 phases
mass	2760 kg
location gdansk poland


(subject to technical errors/modifications and prior sale)
 TWIN HEAD ROLLER COATER WITH REVERSE DOCTOR ROLLERS CEFLA SORBINI MODEL.: SMARTCOATER REVERSE MF, YEAR.: 2006 TWIN HEAD ROLLER COATER WITH SECOND APPLICATION ROLLER REVERSE, TO APPLY HIGH VISCOSITY SEALERS. MACHINE EQUIPPED WITH OSCILLATING AND MOTORIZED SCRAPERS. MACHINE: - NO. MR2TRF26117 FREE-MOVING MACHINE ON WHEELS FOR WITHDRAWAL FROM THE LINE OR INDIVIDUALLY WORKING WIDTH 1350 MM TRANSPORT WIDTH (ROLLERS) 1330 MM FIRST HEAD 1 CHROMED DOSING ROLLER 173 MM DIAMETER 1 RUBBERIZED APPLICATION ROLLER 248 MM DIAMETER SECOND HEAD „REVERSE“ 1 CHROMED DOSING ROLLER 173 MM DIAMETER 1 RUBBERIZED APPLICATION ROLLER 248 MM DIAMETER QUICK-CHANGE SYSTEM OF THE ORDER ROLL WORKPIECE LENGTH MIN 300 MM FEED 4 - 20 M / MIN, ELECTRONICALLY INFINITELY VARIABLE WORKING HEIGHT ABOVE FLOOR APPROX. 880 – 940 MM TRANSMISSION HEIGHT, PLATEN THICKNESS 3 - 100 MM MOTORIZED HEIGHT ADJUSTMENT VIA PUSH BUTTON ON THE CONTROL PANEL PAINT CIRCULATION WITH DOUBLE MEMBRANE PUMP OPERATING SIDE RIGHT SWIVELING HANGING DESK FOR MACHINE CONTROL FREE STANDING ELECTRICAL CABINET ON DRIVE SIDE CABLE CONNECTION FROM MACHINE TO CONTROL CABINET VIA CABLE LOOP POWER CONSUMPTION 5.4 KW OPERATING VOLTAGE 400 V, AC, 50 HZ, 3 PHASES MASS 2760 KG LOCATION GDANSK POLAND (SUBJECT TO TECHNICAL ERRORS/MODIFICATIONS AND PRIOR SALE)
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 3.600 €
Ubicación: Land-weight approx.: 6000 kg<br/>dimensions (l x w x h) approx.: 7000 x 4500 x 4000 mm<br/>description: cefla spraybotic re5/c used for spreading glue on surfaces before coating them with pvc foils for kitchen fronts, feed rate from 3.50 up to 20.30 m/min, one spraying head with 3 guns, for more details see the photos WEIGHT APPROX.: 6000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 4500 X 4000 MM
DESCRIPTION: CEFLA SPRAYBOTIC RE5/C USED FOR SPREADING GLUE ON SURFACES BEFORE COATING THEM WITH PVC FOILS FOR KITCHEN FRONTS, FEED RATE FROM 3.50 UP TO 20.30 M/MIN, ONE SPRAYING HEAD WITH 3 GUNS, FOR MORE DETAILS SEE THE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cefla l=3000 ( 2 pompe sottopressione)cabina verniciatura, x ritocco )    CEFLA L=3000 ( 2 POMPE SOTTOPRESSIONE)CABINA VERNICIATURA, X RITOCCO )
Vendedor: Corimactrade® by Ciagroup Srl
Año de construcción: usado
Precio: used machinery auction RESALE 600 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 4000 x 2300 x 1400 mm<br/>description: max. machining width 1300 mm, max. machinable thickness 80 mm, system with rod transportation, ultraviolet lamps ? uv, no. lamps 2, safety standard ce mark. no electrical cabinet, lamps not included WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2300 X 1400 MM
DESCRIPTION: MAX. MACHINING WIDTH 1300 MM, MAX. MACHINABLE THICKNESS 80 MM, SYSTEM WITH ROD TRANSPORTATION, ULTRAVIOLET LAMPS ? UV, NO. LAMPS 2, SAFETY STANDARD CE MARK. NO ELECTRICAL CABINET, LAMPS NOT INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-producer cefla - type uv 2000 - year of manufacture
 -working width 1300 mm
 -number of tubes from above 1 pcs.
 -just found tubes
 -suitable for mercury tubes
 -suitable for gallium tubes
 -stangentransport
 -rod division - ducting, fan - feed adjustable - length
 -width
 -height - length - machine dimensions l x w x h in meters
 -mesasure switch cabinet - overall connection
 -the camp site
 -volt, hz 400 / 50 - maximum voltage +/-5% PRODUCER CEFLA - TYPE UV 2000 - YEAR OF MANUFACTURE -WORKING WIDTH 1300 MM -NUMBER OF TUBES FROM ABOVE 1 PCS. -JUST FOUND TUBES -SUITABLE FOR MERCURY TUBES -SUITABLE FOR GALLIUM TUBES -STANGENTRANSPORT -ROD DIVISION - DUCTING, FAN - FEED ADJUSTABLE - LENGTH -WIDTH -HEIGHT - LENGTH - MACHINE DIMENSIONS L X W X H IN METERS -MESASURE SWITCH CABINET - OVERALL CONNECTION -THE CAMP SITE -VOLT, HZ 400 / 50 - MAXIMUM VOLTAGE +/-5%
Vendedor: Ingo Brötzmann Maschinen und Anlagen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 1700 kg<br/>dimensions (l x w x h) approx.: 2500 x 2600 x 1400 mm<br/>description: max. machining width 1300 mm, system with rod transportation, ultraviolet lamps ? uv, no. lamps 3 ,safety standard ce mark, lamps not included WEIGHT APPROX.: 1700 KG
DIMENSIONS (L X W X H) APPROX.: 2500 X 2600 X 1400 MM
DESCRIPTION: MAX. MACHINING WIDTH 1300 MM, SYSTEM WITH ROD TRANSPORTATION, ULTRAVIOLET LAMPS ? UV, NO. LAMPS 3 ,SAFETY STANDARD CE MARK, LAMPS NOT INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-producer cefla - type uv 2000 - year of manufacture
 -working width 1300 mm
 -number of tubes from above 1 pcs.
 -just found tubes
 -suitable for mercury tubes
 -suitable for gallium tubes
 -stangentransport
 -rod division - ducting, fan - feed adjustable - length
 -width
 -height - length - machine dimensions l x w x h in meters
 -mesasure switch cabinet - overall connection
 -the camp site
 -volt, hz 400 / 50 - maximum voltage +/-5% PRODUCER CEFLA - TYPE UV 2000 - YEAR OF MANUFACTURE -WORKING WIDTH 1300 MM -NUMBER OF TUBES FROM ABOVE 1 PCS. -JUST FOUND TUBES -SUITABLE FOR MERCURY TUBES -SUITABLE FOR GALLIUM TUBES -STANGENTRANSPORT -ROD DIVISION - DUCTING, FAN - FEED ADJUSTABLE - LENGTH -WIDTH -HEIGHT - LENGTH - MACHINE DIMENSIONS L X W X H IN METERS -MESASURE SWITCH CABINET - OVERALL CONNECTION -THE CAMP SITE -VOLT, HZ 400 / 50 - MAXIMUM VOLTAGE +/-5%
Vendedor: Ingo Brötzmann Maschinen und Anlagen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tlf/b1-tte4500/re, year: 1999, work piece width min-max mm: 10-1350, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 100, number of lamps: 2, drive power kw: ca. 0,75, electrical power consumption kw: 20, year :1999 MANUFACTURER: CEFLA, TYPE: TLF/B1-TTE4500/RE, YEAR: 1999, WORK PIECE WIDTH MIN-MAX MM: 10-1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 100, NUMBER OF LAMPS: 2, DRIVE POWER KW: CA. 0,75, ELECTRICAL POWER CONSUMPTION KW: 20, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-producer cefla - type fev eu2 / 8-irm / tt 11,000 - year of production 1993 - working width 1300 mm
 -maximum height of parts ~ 100 mm
 -jet dry channel length 7,500 mm
 -round nozzles
 -ir emitter 4 + 4 pcs.
 -stangentransport 8.500 mm
 -roller pitch 100 mm
 -feed continuously adjustable approx. 2.5 7.5 m / min
 -the camp site
 -volt, hz 400 / 50   PRODUCER CEFLA - TYPE FEV EU2 / 8-IRM / TT 11,000 - YEAR OF PRODUCTION 1993 - WORKING WIDTH 1300 MM -MAXIMUM HEIGHT OF PARTS ~ 100 MM -JET DRY CHANNEL LENGTH 7,500 MM -ROUND NOZZLES -IR EMITTER 4 + 4 PCS. -STANGENTRANSPORT 8.500 MM -ROLLER PITCH 100 MM -FEED CONTINUOUSLY ADJUSTABLE APPROX. 2.5 7.5 M / MIN -THE CAMP SITE -VOLT, HZ 400 / 50
Vendedor: Ingo Brötzmann Maschinen und Anlagen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tlf/bb3-tte4500/re, year: 1999, work piece width min-max mm: 10-1350, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 100, number of lamps: 4, drive power kw: ca. 0,75, electrical power consumption kw: 57,1, year :1999 MANUFACTURER: CEFLA, TYPE: TLF/BB3-TTE4500/RE, YEAR: 1999, WORK PIECE WIDTH MIN-MAX MM: 10-1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 100, NUMBER OF LAMPS: 4, DRIVE POWER KW: CA. 0,75, ELECTRICAL POWER CONSUMPTION KW: 57,1, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-
-manufacturers of cefla/sorbini - type ecolight - year of construction 1995 - working width 1300 mm
 -working height 870 +-20 mm
 -number of tubes above 2 pcs.
 -pipe just set 2 pcs.
 -suitable for mercury tubes
 -suitable for gallium tubes
 -tube power 80 w / cm
 -maximum part height 70 mm
 -stangentransport
 -length 2,000 mm
 -width: 2,300 mm
 -length 2000 mm
 -volt, hz 400 / 50 - electrical overall connection, 38 kw
 -maximum voltage +/-5%
 -MANUFACTURERS OF CEFLA/SORBINI - TYPE ECOLIGHT - YEAR OF CONSTRUCTION 1995 - WORKING WIDTH 1300 MM -WORKING HEIGHT 870 +-20 MM -NUMBER OF TUBES ABOVE 2 PCS. -PIPE JUST SET 2 PCS. -SUITABLE FOR MERCURY TUBES -SUITABLE FOR GALLIUM TUBES -TUBE POWER 80 W / CM -MAXIMUM PART HEIGHT 70 MM -STANGENTRANSPORT -LENGTH 2,000 MM -WIDTH: 2,300 MM -LENGTH 2000 MM -VOLT, HZ 400 / 50 - ELECTRICAL OVERALL CONNECTION, 38 KW -MAXIMUM VOLTAGE +/-5%
Vendedor: Ingo Brötzmann Maschinen und Anlagen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 69.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 20000 x 4500 x 3300 mm<br/>description: rarely used and young cefla painting line consisting of the following components:<br> <br> <b>belt conveyor tb3500</b><br> with dust extraction unit. feed speed stepless 2,2 - 20 m/min, cap-hood with fan units and anti-static linear brush made from carbon.<br> <br> <b>spraying machine with 1 axis, typ mito k</b><br> 1-arm spraying machine with dry filtering and paper conveyor. central axis wth 4 spraying heads. max. speed of spraying unit 140 m/min. scanner with 135 photodiodes for scanning the shape and position of workpiece. minimum length of workpiece 250 mm. feed speed stepless 1 - 6 m/min. plc control with 7,5 touch screen, ethernet and usb connections.<br> <br> <b>2k paintsupply unit wagner</b><br> with 4 paint pumps wagner leopard and wagner flexcontrol smart control system<br> <br> <b>2 drying tunnels, type fev e/eu</b><br> length of tunnels each approx. 4500 mm, max. height of work piece 130 mm, feed speed max. 20 m/min. with heating units and ehaust fans. connective power 18,5 and 22,8 kw.<br> <br> <b>roller conveyor type tr2500</b><br> conveying length approx. 2500 mm, feed speed 2,2 - 20 m/min.<br> <br> <b>new price of the entire line approx. 250.000 euro</b><br> <br> for further technical details please see pdf-files. WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 20000 X 4500 X 3300 MM
DESCRIPTION: RARELY USED AND YOUNG CEFLA PAINTING LINE CONSISTING OF THE FOLLOWING COMPONENTS:

BELT CONVEYOR TB3500
WITH DUST EXTRACTION UNIT. FEED SPEED STEPLESS 2,2 - 20 M/MIN, CAP-HOOD WITH FAN UNITS AND ANTI-STATIC LINEAR BRUSH MADE FROM CARBON.

SPRAYING MACHINE WITH 1 AXIS, TYP MITO K
1-ARM SPRAYING MACHINE WITH DRY FILTERING AND PAPER CONVEYOR. CENTRAL AXIS WTH 4 SPRAYING HEADS. MAX. SPEED OF SPRAYING UNIT 140 M/MIN. SCANNER WITH 135 PHOTODIODES FOR SCANNING THE SHAPE AND POSITION OF WORKPIECE. MINIMUM LENGTH OF WORKPIECE 250 MM. FEED SPEED STEPLESS 1 - 6 M/MIN. PLC CONTROL WITH 7,5 TOUCH SCREEN, ETHERNET AND USB CONNECTIONS.

2K PAINTSUPPLY UNIT WAGNER
WITH 4 PAINT PUMPS WAGNER LEOPARD AND WAGNER FLEXCONTROL SMART CONTROL SYSTEM

2 DRYING TUNNELS, TYPE FEV E/EU
LENGTH OF TUNNELS EACH APPROX. 4500 MM, MAX. HEIGHT OF WORK PIECE 130 MM, FEED SPEED MAX. 20 M/MIN. WITH HEATING UNITS AND EHAUST FANS. CONNECTIVE POWER 18,5 AND 22,8 KW.

ROLLER CONVEYOR TYPE TR2500
CONVEYING LENGTH APPROX. 2500 MM, FEED SPEED 2,2 - 20 M/MIN.

NEW PRICE OF THE ENTIRE LINE APPROX. 250.000 EURO

FOR FURTHER TECHNICAL DETAILS PLEASE SEE PDF-FILES.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--manufacturer sorbini / cefla - type. vs - working width 1300 mm
 -max height 105 mm
 -diameter brush heads 170 mm
 -number of brush heads 1 pcs.
 -motor 0.56 kw
 -with top adjustment
 -with vacuum transport band 0.37 kw
 -feed adjustable
 -operator side left
 -length 1,000 mm
 -2.695 mm width
 -height 1550 mm
 -location, in stock - colour ral 7035 lightgrey - volt, hz 400 / 50 - maximum voltage +/-5% -MANUFACTURER SORBINI / CEFLA - TYPE. VS - WORKING WIDTH 1300 MM -MAX HEIGHT 105 MM -DIAMETER BRUSH HEADS 170 MM -NUMBER OF BRUSH HEADS 1 PCS. -MOTOR 0.56 KW -WITH TOP ADJUSTMENT -WITH VACUUM TRANSPORT BAND 0.37 KW -FEED ADJUSTABLE -OPERATOR SIDE LEFT -LENGTH 1,000 MM -2.695 MM WIDTH -HEIGHT 1550 MM -LOCATION, IN STOCK - COLOUR RAL 7035 LIGHTGREY - VOLT, HZ 400 / 50 - MAXIMUM VOLTAGE +/-5%
Vendedor: Ingo Brötzmann Maschinen und Anlagen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tr 2500, year: 1999, working widht mm: 1350, drive power kw: 0,26, year :1999 MANUFACTURER: CEFLA, TYPE: TR 2500, YEAR: 1999, WORKING WIDHT MM: 1350, DRIVE POWER KW: 0,26, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land--manufacturers of cefla/sorbini - type tt/20-r - year of production 1998 - working width 1300 mm
 -total width 1530 mm
 -roller rail height 900 mm +-20 mm
 -roll diameter 80 mm
 -division of roles 130 mm
 -all wheels with rubber surface
 -feed continuously adjustable via handwheel
 -motor power kw ex, 0.4
 -volt, hz 400 / 50 - length 2000 mm
 -the camp site 
 -MANUFACTURERS OF CEFLA/SORBINI - TYPE TT/20-R - YEAR OF PRODUCTION 1998 - WORKING WIDTH 1300 MM -TOTAL WIDTH 1530 MM -ROLLER RAIL HEIGHT 900 MM +-20 MM -ROLL DIAMETER 80 MM -DIVISION OF ROLES 130 MM -ALL WHEELS WITH RUBBER SURFACE -FEED CONTINUOUSLY ADJUSTABLE VIA HANDWHEEL -MOTOR POWER KW EX, 0.4 -VOLT, HZ 400 / 50 - LENGTH 2000 MM -THE CAMP SITE
Vendedor: Ingo Brötzmann Maschinen und Anlagen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type:  tn 2500, year: 1999, working widht mm: 1350, drive power kw: 0,26, year :1999 MANUFACTURER: CEFLA, TYPE: TN 2500, YEAR: 1999, WORKING WIDHT MM: 1350, DRIVE POWER KW: 0,26, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-electric supply: 400v/50hz, total installed power: 19.9kw/57a, total engine power: 1.1kw/2.85a max..  ELECTRIC SUPPLY: 400V/50HZ, TOTAL INSTALLED POWER: 19.9KW/57A, TOTAL ENGINE POWER: 1.1KW/2.85A MAX..
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tlf/b2-tte4500/re, year: 1999, work piece width min-max mm: 10-1350, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 100, number of lamps: 2, drive power kw: ca. 0,75, electrical power consumption kw: 37, year :1999 MANUFACTURER: CEFLA, TYPE: TLF/B2-TTE4500/RE, YEAR: 1999, WORK PIECE WIDTH MIN-MAX MM: 10-1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 100, NUMBER OF LAMPS: 2, DRIVE POWER KW: CA. 0,75, ELECTRICAL POWER CONSUMPTION KW: 37, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tlf/b1-tte4500/re, year: 1999, work piece width min-max mm: 10-1350, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 100, number of lamps: 2, drive power kw: ca. 0,75, electrical power consumption kw: 20, year :1999 MANUFACTURER: CEFLA, TYPE: TLF/B1-TTE4500/RE, YEAR: 1999, WORK PIECE WIDTH MIN-MAX MM: 10-1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 100, NUMBER OF LAMPS: 2, DRIVE POWER KW: CA. 0,75, ELECTRICAL POWER CONSUMPTION KW: 20, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tlf/bb3-tte4500/re, year: 1999, work piece width min-max mm: 10-1350, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 100, number of lamps: 4, drive power kw: ca. 0,75, electrical power consumption kw: 57,1, year :1999 MANUFACTURER: CEFLA, TYPE: TLF/BB3-TTE4500/RE, YEAR: 1999, WORK PIECE WIDTH MIN-MAX MM: 10-1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 100, NUMBER OF LAMPS: 4, DRIVE POWER KW: CA. 0,75, ELECTRICAL POWER CONSUMPTION KW: 57,1, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tr 2500, year: 1999, working widht mm: 1350, drive power kw: 0,26, year :1999 MANUFACTURER: CEFLA, TYPE: TR 2500, YEAR: 1999, WORKING WIDHT MM: 1350, DRIVE POWER KW: 0,26, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: tr 2500, year: 1999, length mm: 2500, working widht mm: 1400, drive power kw: 0,26, year :1999 MANUFACTURER: CEFLA, TYPE: TR 2500, YEAR: 1999, LENGTH MM: 2500, WORKING WIDHT MM: 1400, DRIVE POWER KW: 0,26, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla sorbini, type: smart coater, year: 2011, control: sorbini, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 300, min.-max. workpiece height in mm: 3 - 80, operating side: rechts, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: yes, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, attachment bracket roller: yes, rbakel: no, work piece thickness max mm: 6-80, feeding speed min/max: 8-25, roller lift out: yes, hight adjustment by engine: yes, type of transportation: band, pump system: membrane, year :2011 MANUFACTURER: CEFLA SORBINI, TYPE: SMART COATER, YEAR: 2011, CONTROL: SORBINI, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3 - 80, OPERATING SIDE: RECHTS, REGELBARER DIREKTANTRIEB FüR AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: YES, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, ATTACHMENT BRACKET ROLLER: YES, RBAKEL: NO, WORK PIECE THICKNESS MAX MM: 6-80, FEEDING SPEED MIN/MAX: 8-25, ROLLER LIFT OUT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, TYPE OF TRANSPORTATION: BAND, PUMP SYSTEM: MEMBRANE, YEAR :2011
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: spaybotic, year: 2003, control: cefla, spraying line: yes, work piece width min-max mm: 1400, min.-max. workpiece length in mm: 150-4500, min.-max. workpiece height in mm: 10-100, working widht max mm: 1400, spraying machine: 1, spraying heads - total: 4, farbmanagment: yes, work piece detection: yes, conveyour system: band, fast exchange system spray gun carrier: yes, laquer system - airless: 2, laquer system - airmix: 2, by rollers: yes, by scraper: yes, water cleaning: no, dry exhauster: yes, year :2003 MANUFACTURER: CEFLA, TYPE: SPAYBOTIC, YEAR: 2003, CONTROL: CEFLA, SPRAYING LINE: YES, WORK PIECE WIDTH MIN-MAX MM: 1400, MIN.-MAX. WORKPIECE LENGTH IN MM: 150-4500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, WORKING WIDHT MAX MM: 1400, SPRAYING MACHINE: 1, SPRAYING HEADS - TOTAL: 4, FARBMANAGMENT: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER SYSTEM - AIRLESS: 2, LAQUER SYSTEM - AIRMIX: 2, BY ROLLERS: YES, BY SCRAPER: YES, WATER CLEANING: NO, DRY EXHAUSTER: YES, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: heesemann cefla türenlackieranlage, type: cefla robot, year: 2004, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 3-80, working widht max mm: 1300, spraying line: yes, work piece cleaning: yes, work piece detection: yes, conveyour system: band, spraying stations: 1, fast exchange system spray gun carrier: yes, laquer circles: 4, laquer system - airless: yes, laquer system - airmix: yes, by rollers: yes, by scraper: yes, dry exhauster: yes, jet dryers (number): hochtrockner, sanding machines (number): 1, brushing machine: no, design sanding machine no 1: querband/längs/längs, dust exhaust (number): yes, uv dryers - 3 lamps inclined (number): yes 120 watt, jet dryers (number): hochtrockner, high dryers (number): 32, length of pallets mm: 5500, feedin speed m/min: 3-6, year :2004 MANUFACTURER: HEESEMANN CEFLA TüRENLACKIERANLAGE, TYPE: CEFLA ROBOT, YEAR: 2004, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3-80, WORKING WIDHT MAX MM: 1300, SPRAYING LINE: YES, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, SPRAYING STATIONS: 1, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER CIRCLES: 4, LAQUER SYSTEM - AIRLESS: YES, LAQUER SYSTEM - AIRMIX: YES, BY ROLLERS: YES, BY SCRAPER: YES, DRY EXHAUSTER: YES, JET DRYERS (NUMBER): HOCHTROCKNER, SANDING MACHINES (NUMBER): 1, BRUSHING MACHINE: NO, DESIGN SANDING MACHINE NO 1: QUERBAND/LäNGS/LäNGS, DUST EXHAUST (NUMBER): YES, UV DRYERS - 3 LAMPS INCLINED (NUMBER): YES 120 WATT, JET DRYERS (NUMBER): HOCHTROCKNER, HIGH DRYERS (NUMBER): 32, LENGTH OF PALLETS MM: 5500, FEEDIN SPEED M/MIN: 3-6, YEAR :2004
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: düsentrokner, year: 2007, work piece width min-max mm: 100-1300, min.-max. workpiece length in mm: 120, length mm: 13500, revisionsklappen: yes, gehäuse wärmeisoliert mm: yes, kanaltemperatur grad: ca.60, ex geschützt: no, gesamthöhe mm : 2850, temperature regulation: yes, druckdifferenzschalter: yes, working height in mm: 60, conveyor lenght mm: 13500, thermal output: ca.70000, feedin speed m/min: 3-5, rod transportation: yes, round nozzle: yes, heated by: warmwasser, heating battery: 1, 1st damper register kw: ca.70, year :2007 MANUFACTURER: CEFLA, TYPE: DüSENTROKNER, YEAR: 2007, WORK PIECE WIDTH MIN-MAX MM: 100-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 120, LENGTH MM: 13500, REVISIONSKLAPPEN: YES, GEHäUSE WäRMEISOLIERT MM: YES, KANALTEMPERATUR GRAD: CA.60, EX GESCHüTZT: NO, GESAMTHöHE MM : 2850, TEMPERATURE REGULATION: YES, DRUCKDIFFERENZSCHALTER: YES, WORKING HEIGHT IN MM: 60, CONVEYOR LENGHT MM: 13500, THERMAL OUTPUT: CA.70000, FEEDIN SPEED M/MIN: 3-5, ROD TRANSPORTATION: YES, ROUND NOZZLE: YES, HEATED BY: WARMWASSER, HEATING BATTERY: 1, 1ST DAMPER REGISTER KW: CA.70, YEAR :2007
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla winkelübergabe, year: 2005, angular transfer: yes, work piece width min-max mm: 1350, min.-max. workpiece length in mm: 350 - 3800, min.-max. workpiece height in mm: 10-40, working length max mm: 3900, feeding speed max m/min: 10, feeding speed continous adjustable: yes, working hight adjustable mm: yes, roller width in mm: 1400, roller diameter mm: 80, working hight mm: 900 +/-, lift out roll system: yes, engine power kw: 4, year :2005 MANUFACTURER: CEFLA WINKEL&UUML;BERGABE, YEAR: 2005, ANGULAR TRANSFER: YES, WORK PIECE WIDTH MIN-MAX MM: 1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 350 - 3800, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-40, WORKING LENGTH MAX MM: 3900, FEEDING SPEED MAX M/MIN: 10, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORKING HIGHT ADJUSTABLE MM: YES, ROLLER WIDTH IN MM: 1400, ROLLER DIAMETER MM: 80, WORKING HIGHT MM: 900 +/-, LIFT OUT ROLL SYSTEM: YES, ENGINE POWER KW: 4, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: beizlinie, year: 2005, work piece width min-max mm: 100 - 1300, min.-max. workpiece length in mm: 3 - 80, min.-max. workpiece height in mm: 300 - 2010, working widht max mm: 5, working width min min mm: yes, apstapelanlage  typ: no, cycle rate: yes, type of stacking system: bürste d2/1300-15, conveyour system: yes, fast exchange system spray gun carrier: rotostain rt 10, laquer circles: yes, laquer system - airless: vs/26-2c, laquer system - airmix: brush sander, water cleaning: fev eu2/7-tt 12850, working widht mm: band, year :2005 MANUFACTURER: CEFLA, TYPE: BEIZLINIE, YEAR: 2005, WORK PIECE WIDTH MIN-MAX MM: 100 - 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 3 - 80, MIN.-MAX. WORKPIECE HEIGHT IN MM: 300 - 2010, WORKING WIDHT MAX MM: 5, WORKING WIDTH MIN MIN MM: YES, APSTAPELANLAGE TYP: NO, CYCLE RATE: YES, TYPE OF STACKING SYSTEM: B&UUML;RSTE D2/1300-15, CONVEYOUR SYSTEM: YES, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: ROTOSTAIN RT 10, LAQUER CIRCLES: YES, LAQUER SYSTEM - AIRLESS: VS/26-2C, LAQUER SYSTEM - AIRMIX: BRUSH SANDER, WATER CLEANING: FEV EU2/7-TT 12850, WORKING WIDHT MM: BAND, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: uv 2000, year: 2008, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 150-3000, min.-max. workpiece height in mm: 10-60, working widht max mm: 1300, number of lamps: 1, kw power 1 lamp: 10, lampen gerade eingebaut: yes, adjustable: no, power per lamp watt uv: 80, od distance mm: ca.150, conveyor lenght mm: ca.2200, outer belt width mm: 2400, working hight approx mm: 950, feeding speed m/min: 8-20, conveyor: stange, drive power kw: 1,2, through running hight mm: ca.100, electrical power consumption kw: 19, year :2008 MANUFACTURER: CEFLA, TYPE: UV 2000, YEAR: 2008, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150-3000, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, WORKING WIDHT MAX MM: 1300, NUMBER OF LAMPS: 1, KW POWER 1 LAMP: 10, LAMPEN GERADE EINGEBAUT: YES, ADJUSTABLE: NO, POWER PER LAMP WATT UV: 80, OD DISTANCE MM: CA.150, CONVEYOR LENGHT MM: CA.2200, OUTER BELT WIDTH MM: 2400, WORKING HIGHT APPROX MM: 950, FEEDING SPEED M/MIN: 8-20, CONVEYOR: STANGE, DRIVE POWER KW: 1,2, THROUGH RUNNING HIGHT MM: CA.100, ELECTRICAL POWER CONSUMPTION KW: 19, YEAR :2008
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: uv trockner, year: 2003, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 350, number of lamps: 2, lampen schräg eingebaut: 2, conveyor lenght mm: ca 3000, working hight approx mm: ca 950, feeding speed m/min: ca 5 - 25, rod transportation: yes, year :2003 MANUFACTURER: CEFLA, TYPE: UV TROCKNER, YEAR: 2003, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 350, NUMBER OF LAMPS: 2, LAMPEN SCHR&AUML;G EINGEBAUT: 2, CONVEYOR LENGHT MM: CA 3000, WORKING HIGHT APPROX MM: CA 950, FEEDING SPEED M/MIN: CA 5 - 25, ROD TRANSPORTATION: YES, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, year: 2003, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 300, min.-max. workpiece height in mm: 3 - 80, number of lamps: 1, lampen schräg eingebaut: 1, working hight approx mm: ca 950 , feeding speed m/min: ca 5 - 25, rod transportation: yes, year :2003 MANUFACTURER: CEFLA, YEAR: 2003, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3 - 80, NUMBER OF LAMPS: 1, LAMPEN SCHR&AUML;G EINGEBAUT: 1, WORKING HIGHT APPROX MM: CA 950 , FEEDING SPEED M/MIN: CA 5 - 25, ROD TRANSPORTATION: YES, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla-sobini, type: spachtelwalze sp1, year: 2003, control: sorbini, operating side: links, working hight mm: +/- 920, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 5 - 30, gummierte auftragswalze mm: ca 12, gummiqualität : ca. 50 shore, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, direktantrieb glättwalze: yes, verchromte glättwalze mm: yes, auftragswalzenbreite mm: 1450, dosierwalzenbreite mm: 1450, glättewalzenbreite mm: 1450, attachment bracket roller: yes, everse drive: yes, rbakel: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 100, min.-max. workpiece height in mm: 3 - 80, feeding speed min/max: 5 - 30, roller lift out: yes, hight adjustment by engine: yes, carriage: yes, anschluß für betrieb in zentralgesteuerten lackieranlagen: yes, type of transportation: band, wight approx. kg: 2000, required space l x w x h mm: ca. 1600x300x1900, year :2003 MANUFACTURER: CEFLA-SOBINI, TYPE: SPACHTELWALZE SP1, YEAR: 2003, CONTROL: SORBINI, OPERATING SIDE: LINKS, WORKING HIGHT MM: +/- 920, REGELBARER DIREKTANTRIEB F&UUML;R AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 5 - 30, GUMMIERTE AUFTRAGSWALZE MM: CA 12, GUMMIQUALIT&AUML;T : CA. 50 SHORE, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, DIREKTANTRIEB GL&AUML;TTWALZE: YES, VERCHROMTE GL&AUML;TTWALZE MM: YES, AUFTRAGSWALZENBREITE MM: 1450, DOSIERWALZENBREITE MM: 1450, GL&AUML;TTEWALZENBREITE MM: 1450, ATTACHMENT BRACKET ROLLER: YES, EVERSE DRIVE: YES, RBAKEL: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 100, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3 - 80, FEEDING SPEED MIN/MAX: 5 - 30, ROLLER LIFT OUT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, CARRIAGE: YES, ANSCHLU&SZLIG; F&UUML;R BETRIEB IN ZENTRALGESTEUERTEN LACKIERANLAGEN: YES, TYPE OF TRANSPORTATION: BAND, WIGHT APPROX. KG: 2000, REQUIRED SPACE L X W X H MM: CA. 1600X300X1900, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla-sobini, type: spachtelwalze sp1, year: 2005, control: sorbini, operating side: links, working hight mm: +/- 920, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 5 - 30, gummierte auftragswalze mm: ca 12, gummiqualität : ca. 50 shore, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, direktantrieb glättwalze: yes, verchromte glättwalze mm: yes, auftragswalzenbreite mm: 1450, dosierwalzenbreite mm: 1450, glättewalzenbreite mm: 1450, attachment bracket roller: yes, everse drive: yes, rbakel: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 100, min.-max. workpiece height in mm: 3 - 80, feeding speed min/max: 5 - 30, roller lift out: yes, hight adjustment by engine: yes, carriage: yes, anschluß für betrieb in zentralgesteuerten lackieranlagen: yes, type of transportation: band, wight approx. kg: 2000, required space l x w x h mm: ca. 1600x300x1900, year :2005 MANUFACTURER: CEFLA-SOBINI, TYPE: SPACHTELWALZE SP1, YEAR: 2005, CONTROL: SORBINI, OPERATING SIDE: LINKS, WORKING HIGHT MM: +/- 920, REGELBARER DIREKTANTRIEB F&UUML;R AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 5 - 30, GUMMIERTE AUFTRAGSWALZE MM: CA 12, GUMMIQUALIT&AUML;T : CA. 50 SHORE, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, DIREKTANTRIEB GL&AUML;TTWALZE: YES, VERCHROMTE GL&AUML;TTWALZE MM: YES, AUFTRAGSWALZENBREITE MM: 1450, DOSIERWALZENBREITE MM: 1450, GL&AUML;TTEWALZENBREITE MM: 1450, ATTACHMENT BRACKET ROLLER: YES, EVERSE DRIVE: YES, RBAKEL: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 100, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3 - 80, FEEDING SPEED MIN/MAX: 5 - 30, ROLLER LIFT OUT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, CARRIAGE: YES, ANSCHLU&SZLIG; F&UUML;R BETRIEB IN ZENTRALGESTEUERTEN LACKIERANLAGEN: YES, TYPE OF TRANSPORTATION: BAND, WIGHT APPROX. KG: 2000, REQUIRED SPACE L X W X H MM: CA. 1600X300X1900, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: roc 2, year: 1994, work piece width min-max mm: 1300, work piece cleaning: yes, work piece detection: yes, conveyour system: band, spraying stations: 2 x 2, farbkreise: 2, schnellwechselsystem : yes, laquer recharging: yes, transportsystem band: yes, year :1994 MANUFACTURER: CEFLA, TYPE: ROC 2, YEAR: 1994, WORK PIECE WIDTH MIN-MAX MM: 1300, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, SPRAYING STATIONS: 2 X 2, FARBKREISE: 2, SCHNELLWECHSELSYSTEM : YES, LAQUER RECHARGING: YES, TRANSPORTSYSTEM BAND: YES, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla , type: hochtrockner, year: 2003, work piece width min-max mm: 1400, min.-max. workpiece length in mm: 150-5500, min.-max. workpiece height in mm: 10-100, working widht max mm: 1400, length of pallets mm: 5500, conveyor lenght mm: 32 x 5500, feedin speed m/min: 3-5, damper register - items: 1, damper register - items: 1, year :2003 MANUFACTURER: CEFLA , TYPE: HOCHTROCKNER, YEAR: 2003, WORK PIECE WIDTH MIN-MAX MM: 1400, MIN.-MAX. WORKPIECE LENGTH IN MM: 150-5500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, WORKING WIDHT MAX MM: 1400, LENGTH OF PALLETS MM: 5500, CONVEYOR LENGHT MM: 32 X 5500, FEEDIN SPEED M/MIN: 3-5, DAMPER REGISTER - ITEMS: 1, DAMPER REGISTER - ITEMS: 1, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: trommelwender, year: 2003, work piece width min-max mm: 1400, min.-max. workpiece length in mm: 500-3500, min.-max. workpiece height in mm: 10-80, continous adjustable feeding speed m/min: yes, roll transport: yes, machine from production line: yes, total lenght: 4500, year :2003 MANUFACTURER: CEFLA, TYPE: TROMMELWENDER, YEAR: 2003, WORK PIECE WIDTH MIN-MAX MM: 1400, MIN.-MAX. WORKPIECE LENGTH IN MM: 500-3500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-80, CONTINOUS ADJUSTABLE FEEDING SPEED M/MIN: YES, ROLL TRANSPORT: YES, MACHINE FROM PRODUCTION LINE: YES, TOTAL LENGHT: 4500, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: hochtrockner, year: 2003, work piece width min-max mm: 5500 x 1400, min.-max. workpiece height in mm: 10-100, number of pallets: 32, length of pallets mm: 5500, working widht mm: 1400, working height in mm: 980 +/-, feedin speed m/min: 3-8, damper register - items: 1, damper register - items: 1, year :2003 MANUFACTURER: CEFLA, TYPE: HOCHTROCKNER, YEAR: 2003, WORK PIECE WIDTH MIN-MAX MM: 5500 X 1400, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, NUMBER OF PALLETS: 32, LENGTH OF PALLETS MM: 5500, WORKING WIDHT MM: 1400, WORKING HEIGHT IN MM: 980 +/-, FEEDIN SPEED M/MIN: 3-8, DAMPER REGISTER - ITEMS: 1, DAMPER REGISTER - ITEMS: 1, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: 2 stück abluftventilatoren, type: waren verbaut sritzmaschine, year: ca.2005, diameter intake mm: 400, engine power kw: 2,5/1720 , rotations rpm: 1720, direkt drive: yes, suction side mm: 400, outlet side mm: 400 x 1000, year :ca.2005 MANUFACTURER: 2 ST&UUML;CK ABLUFTVENTILATOREN, TYPE: WAREN VERBAUT SRITZMASCHINE, YEAR: CA.2005, DIAMETER INTAKE MM: 400, ENGINE POWER KW: 2,5/1720 , ROTATIONS RPM: 1720, DIREKT DRIVE: YES, SUCTION SIDE MM: 400, OUTLET SIDE MM: 400 X 1000, YEAR :CA.2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla rotorstain, type: rt 2000 d, year: 2007, control: cefla, lackierstrasse für: 10-1350, einlauband: 150-3500, sanding machine: 10-60, abdunstrockner mm : yes, mit oir lampen: band, winkelübergabe 180 grad: 16, düsentrockenkanal 4 mm mit irk strahlern: yes, düsentrockenkanal 5 mm mit irk strahlern: 16, düsentrockenkanal 6 mm mit irk sttrahlern: 2, strahler 50-120 watt: yes, kaltlichtstrahler: yes, jet drier mm: yes, uv dryer 120 watt lamps: yes, uv dryer 80 watt lamps: no, 4-axis machine: yes, stainless steel design: yes, spraying stations: sorbini, removing belt: 2,5-10, year :2007 MANUFACTURER: CEFLA ROTORSTAIN, TYPE: RT 2000 D, YEAR: 2007, CONTROL: CEFLA, LACKIERSTRASSE F&UUML;R: 10-1350, EINLAUBAND: 150-3500, SANDING MACHINE: 10-60, ABDUNSTROCKNER MM : YES, MIT OIR LAMPEN: BAND, WINKEL&UUML;BERGABE 180 GRAD: 16, D&UUML;SENTROCKENKANAL 4 MM MIT IRK STRAHLERN: YES, D&UUML;SENTROCKENKANAL 5 MM MIT IRK STRAHLERN: 16, D&UUML;SENTROCKENKANAL 6 MM MIT IRK STTRAHLERN: 2, STRAHLER 50-120 WATT: YES, KALTLICHTSTRAHLER: YES, JET DRIER MM: YES, UV DRYER 120 WATT LAMPS: YES, UV DRYER 80 WATT LAMPS: NO, 4-AXIS MACHINE: YES, STAINLESS STEEL DESIGN: YES, SPRAYING STATIONS: SORBINI, REMOVING BELT: 2,5-10, YEAR :2007
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla durchlauflackieranlage, year: 2015, control: cefla, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 350, min.-max. workpiece height in mm: 3 - 80, working hight mm: ca 980, spraying line: yes, work piece cleaning: yes, work piece detection: yes, conveyour system: band, spraying stations: 2, fast exchange system spray gun carrier: yes, laquer circles: 3, laquer system - airless: yes, laquer system - airmix: yes, laquer recharging: yes, by rollers: yes, sanding machines (number): 1, brushing machine: 1, design sanding machine no 1: costa mit tellerbürsten und längschleifaggrgat, dust exhaust (number): 1, 2 uv lamps qty.: yes, ir dryers (number): yes, high dryers (number): 32, length of pallets mm: 5300, feedin speed m/min: 2 - 10,6, year :2015 MANUFACTURER: CEFLA DURCHLAUFLACKIERANLAGE, YEAR: 2015, CONTROL: CEFLA, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 350, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3 - 80, WORKING HIGHT MM: CA 980, SPRAYING LINE: YES, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, SPRAYING STATIONS: 2, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER CIRCLES: 3, LAQUER SYSTEM - AIRLESS: YES, LAQUER SYSTEM - AIRMIX: YES, LAQUER RECHARGING: YES, BY ROLLERS: YES, SANDING MACHINES (NUMBER): 1, BRUSHING MACHINE: 1, DESIGN SANDING MACHINE NO 1: COSTA MIT TELLERB&UUML;RSTEN UND L&AUML;NGSCHLEIFAGGRGAT, DUST EXHAUST (NUMBER): 1, 2 UV LAMPS QTY.: YES, IR DRYERS (NUMBER): YES, HIGH DRYERS (NUMBER): 32, LENGTH OF PALLETS MM: 5300, FEEDIN SPEED M/MIN: 2 - 10,6, YEAR :2015
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)