58 ofertas

Año de construcción: usado
Ubicación: Land-can capacity:
 34.000 cans per hour for 0,15 slim can
 34.000 cans per hour for 0,25 slim can
 34.000 cans per hour for 0,25 standard can
 25.000 cans per hour for 0,33 sleek and standard can
 25.000 cans per hour for 0,355 sleek can 
 20.000 cans per hour for 0,5 standard can

 packaging: tray with or without foil: 12 pack and 24 pack

 shrink pack: 4 and 6 packs in tray of 12 pack or 24 pack

 
 1. can depalletizer 
 made: sima 
 year: 2003 
 
 2. can rinser
 four channels

 3. can filler
 made: khs
 year: 2008 
 40 valves

 combination valve for can lid 200 and 202

 4. seamer
 made: sima 
 year: 2003
 6 head seamer for can lid 200 to 202 


 5. fill height control
 made: heuft 

 6. tunnel pasteurizer
 made: fmt italy
 year: 2003
 with cooling tower 

 7. can blowing system
 
 8. date coder
 
 9. tray-shrink-packer / multipacker
 made: ocme
 year: 2012
 
 10. labeller for trays
 
 11. tray-shrink-packer
 made: smi italy
 year: 2003
 
 12. palletizer
 made: sima
 year: 2003

 13. pallet wrapper:
 made: sima
 year: 2003

 14. syrup tanks 4 pieces with agitator 
 1 water tank

 15. shugar dissolving tank and shugar silo

 16. mixer
 
 17. water treatment
 
 18. cip-unit
 
 19. steam boiler 
 
 20. can conveyors

 21. air compressor
  
   CAN CAPACITY: 34.000 CANS PER HOUR FOR 0,15 SLIM CAN 34.000 CANS PER HOUR FOR 0,25 SLIM CAN 34.000 CANS PER HOUR FOR 0,25 STANDARD CAN 25.000 CANS PER HOUR FOR 0,33 SLEEK AND STANDARD CAN 25.000 CANS PER HOUR FOR 0,355 SLEEK CAN 20.000 CANS PER HOUR FOR 0,5 STANDARD CAN PACKAGING: TRAY WITH OR WITHOUT FOIL: 12 PACK AND 24 PACK SHRINK PACK: 4 AND 6 PACKS IN TRAY OF 12 PACK OR 24 PACK 1. CAN DEPALLETIZER MADE: SIMA YEAR: 2003 2. CAN RINSER FOUR CHANNELS 3. CAN FILLER MADE: KHS YEAR: 2008 40 VALVES COMBINATION VALVE FOR CAN LID 200 AND 202 4. SEAMER MADE: SIMA YEAR: 2003 6 HEAD SEAMER FOR CAN LID 200 TO 202 5. FILL HEIGHT CONTROL MADE: HEUFT 6. TUNNEL PASTEURIZER MADE: FMT ITALY YEAR: 2003 WITH COOLING TOWER 7. CAN BLOWING SYSTEM 8. DATE CODER 9. TRAY-SHRINK-PACKER / MULTIPACKER MADE: OCME YEAR: 2012 10. LABELLER FOR TRAYS 11. TRAY-SHRINK-PACKER MADE: SMI ITALY YEAR: 2003 12. PALLETIZER MADE: SIMA YEAR: 2003 13. PALLET WRAPPER: MADE: SIMA YEAR: 2003 14. SYRUP TANKS 4 PIECES WITH AGITATOR 1 WATER TANK 15. SHUGAR DISSOLVING TANK AND SHUGAR SILO 16. MIXER 17. WATER TREATMENT 18. CIP-UNIT 19. STEAM BOILER 20. CAN CONVEYORS 21. AIR COMPRESSOR
Vendedor: Ebert Technologie GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 25.000 €
Ubicación: Land-weight approx.: 20000 kg<br/>dimensions (l x w x h) approx.: 8000 x 5200 x 3300 mm<br/>description: x / y / z 4000 x 1200 x 1000 mm, table 4200 x 12000, bt 50 / 22 kw, 3000 rpm, atc with 30 positions, heidenhain tnc 415, 1 gr milling head, note the magnetic table will not be part off this sale WEIGHT APPROX.: 20000 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 5200 X 3300 MM
DESCRIPTION: X / Y / Z 4000 X 1200 X 1000 MM, TABLE 4200 X 12000, BT 50 / 22 KW, 3000 RPM, ATC WITH 30 POSITIONS, HEIDENHAIN TNC 415, 1 GR MILLING HEAD, NOTE THE MAGNETIC TABLE WILL NOT BE PART OFF THIS SALE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data

    long. travel. (x) 3000 mm
    vert. travel  (y) 2000 mm
    cross stroke. (z) 1000 mm
    spindle stroke(w) 700 mm
    360-degree rotation table (b) 0.001
    spindle diam.     150 mm
    spindle speed rpm 50-2200 rpm
    spindle taper. iso 50
    spindle motor power. 30 kw
    ram size 580-430 mm
    machine dimension mt 6,6 x 4,85h x10
    70,000 kg weight

data not binding to occur refrig.att. spindle 60 bar
    ut exchange. auto. 60 stations
    cnc heidenhain tnc i530
    hours work mand. 27048 hours
    table 1400 x1400 mm
    scope table 12000 kgs
   TECHNICAL DATA LONG. TRAVEL. (X) 3000 MM VERT. TRAVEL (Y) 2000 MM CROSS STROKE. (Z) 1000 MM SPINDLE STROKE(W) 700 MM 360-DEGREE ROTATION TABLE (B) 0.001 SPINDLE DIAM. 150 MM SPINDLE SPEED RPM 50-2200 RPM SPINDLE TAPER. ISO 50 SPINDLE MOTOR POWER. 30 KW RAM SIZE 580-430 MM MACHINE DIMENSION MT 6,6 X 4,85H X10 70,000 KG WEIGHT DATA NOT BINDING TO OCCUR REFRIG.ATT. SPINDLE 60 BAR UT EXCHANGE. AUTO. 60 STATIONS CNC HEIDENHAIN TNC I530 HOURS WORK MAND. 27048 HOURS TABLE 1400 X1400 MM SCOPE TABLE 12000 KGS
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Ubicación: Land-capacity: <br/>8000 bph at 0.7 l bottle<br/>12.000 bph at 0.25 l bottle<br/> <br/>formats: glass bottle from 0,2 up to 2,0 l for wine and sparkling wine <br/>id5435 CAPACITY:
8000 BPH AT 0.7 L BOTTLE
12.000 BPH AT 0.25 L BOTTLE

FORMATS: GLASS BOTTLE FROM 0,2 UP TO 2,0 L FOR WINE AND SPARKLING WINE
ID5435
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-package of 4 cam controlled multi spindle automatic lathe, -used-:
pittler prc 32/8 from 1969 (acme-gridley)
pittler prc 36/8 from 1978 (acme-gridley)
pittler prc 50 (56)/6 from 1969 (acme-gridley)
pittler prc 56/6 from 1973 (acme-gridley)
a lot of equipment PACKAGE OF 4 CAM CONTROLLED MULTI SPINDLE AUTOMATIC LATHE, -USED-: PITTLER PRC 32/8 FROM 1969 (ACME-GRIDLEY) PITTLER PRC 36/8 FROM 1978 (ACME-GRIDLEY) PITTLER PRC 50 (56)/6 FROM 1969 (ACME-GRIDLEY) PITTLER PRC 56/6 FROM 1973 (ACME-GRIDLEY) A LOT OF EQUIPMENT
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Ubicación: Land-<br>table length: 4200 mm<br>table width: 1000 mm<br>longitudinal x: 4000 mm<br>cross y: 1200 mm<br>vertical z: 1000 mm<br>positions atc: 30  <br>cnc brand: heidenhain<br>cnc model: tnc 415 <br><p>mach-id   4111</p>
<p>make       cme spain</p>
<p>type         bf - 06</p>
<p>year        1995</p>
<p>specifications</p>
<p>x - travel      4000 mm</p>
<p>y - travel      1200 mm</p>
<p>z - travel      1000 mm</p>
<p>bed / plano / portal / moving column          bed milling</p>
<p>controll         heidenhain tnc 415</p>
<p>table length x width        4200 x 1000 mm</p>
<p>table load in kg        4000 kg</p>
<p>spindle taper        bt 50</p>
<p>kw power on spindle       22 kw</p>
<p>spindle speeds / ranges      3000 rpm</p>
<p>atc tool changer       30</p>
<p>number off controlled axis       5</p>
<p>cnc automatic milling head / gr.1 gr</p>
<p>.dimensions</p>
<p>length       12500 mm</p>
<p>width          5200 mm</p>
<p>height        3300 mm</p>
<p>
TABLE LENGTH: 4200 MM
TABLE WIDTH: 1000 MM
LONGITUDINAL X: 4000 MM
CROSS Y: 1200 MM
VERTICAL Z: 1000 MM
POSITIONS ATC: 30  
CNC BRAND: HEIDENHAIN
CNC MODEL: TNC 415

MACH-ID&NBSP; &NBSP;4111

MAKE&NBSP; &NBSP; &NBSP; &NBSP;CME SPAIN

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;BF - 06

YEAR&NBSP; &NBSP; &NBSP; &NBSP; 1995

SPECIFICATIONS

X - TRAVEL&NBSP; &NBSP; &NBSP; 4000 MM

Y - TRAVEL&NBSP; &NBSP; &NBSP; 1200 MM

Z - TRAVEL&NBSP; &NBSP; &NBSP; 1000 MM

BED / PLANO / PORTAL / MOVING COLUMN&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; BED MILLING

CONTROLL&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;HEIDENHAIN TNC 415

TABLE LENGTH X WIDTH&NBSP; &NBSP; &NBSP; &NBSP; 4200 X 1000 MM

TABLE LOAD IN KG&NBSP; &NBSP; &NBSP; &NBSP; 4000 KG

SPINDLE TAPER&NBSP; &NBSP; &NBSP; &NBSP; BT 50

KW POWER ON SPINDLE&NBSP; &NBSP; &NBSP; &NBSP;22 KW

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; &NBSP; 3000 RPM

ATC TOOL CHANGER&NBSP; &NBSP; &NBSP; &NBSP;30

NUMBER OFF CONTROLLED AXIS&NBSP; &NBSP; &NBSP; &NBSP;5

CNC AUTOMATIC MILLING HEAD / GR.1 GR

.DIMENSIONS

LENGTH&NBSP; &NBSP; &NBSP; &NBSP;12500 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 5200 MM

HEIGHT&NBSP; &NBSP; &NBSP; &NBSP; 3300 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-this is a complete aseptic filling line with a capacity of 18,000 bottles/h at 200 ml, consisting of:

-aseptic filler sig asbofill 610/03
-the heuft squeezer qa
-andre d sealing capper
-sleave applicator clever gs 407
-divider asomatic ag
-wrap-around packer ocme altair n40
-helicoidal elevator apolo vts and conveyor belts THIS IS A COMPLETE ASEPTIC FILLING LINE WITH A CAPACITY OF 18,000 BOTTLES/H AT 200 ML, CONSISTING OF: -ASEPTIC FILLER SIG ASBOFILL 610/03 -THE HEUFT SQUEEZER QA -ANDRE D SEALING CAPPER -SLEAVE APPLICATOR CLEVER GS 407 -DIVIDER ASOMATIC AG -WRAP-AROUND PACKER OCME ALTAIR N40 -HELICOIDAL ELEVATOR APOLO VTS AND CONVEYOR BELTS
Vendedor: Merx Handel & Industrie GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: stellmacher rundholzfräse, type: rsr-s-300/2-2/a, year: 2001, control: hand, work piece length min-max mm: 130-3000, werkstückdurcmesser min-max: 10-259, kw-leistung fräse: 22, fräsköpfe: 1-4 messe, einzugsvorrichtung mm: 4000, auszugsvorrichtung mm: yes, vorschub meter/min-max: 0,2-10, free text: es können die messer auch gegen schleifscheiben getauscht werden/stämme können nach wuchsform gefräst werden oder auch gerade, year :2001 MANUFACTURER: STELLMACHER RUNDHOLZFRäSE, TYPE: RSR-S-300/2-2/A, YEAR: 2001, CONTROL: HAND, WORK PIECE LENGTH MIN-MAX MM: 130-3000, WERKSTüCKDURCMESSER MIN-MAX: 10-259, KW-LEISTUNG FRäSE: 22, FRäSKöPFE: 1-4 MESSE, EINZUGSVORRICHTUNG MM: 4000, AUSZUGSVORRICHTUNG MM: YES, VORSCHUB METER/MIN-MAX: 0,2-10, FREE TEXT: ES KöNNEN DIE MESSER AUCH GEGEN SCHLEIFSCHEIBEN GETAUSCHT WERDEN/STäMME KöNNEN NACH WUCHSFORM GEFRäST WERDEN ODER AUCH GERADE, YEAR :2001
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-    longitudinal travel (x) 3000 mm
    vertical travel (y) 2000 mm
    cross travel (z) 1000 mm
    drill travel (w) 700 mm
    rotary table (b) 360 - 0.001 degrees
    boring spindle diam. 150 mm
    spindle speeds 50-2200 rpm
    spindle taper 50 iso
    spindle motor power 30 kw
    ram size 580-430 mm

data must be verify
standard equipment

    -cooling through spindle 60 bar
    -tools changer 60 stations
    -cnc heidenhain tnc i530
    -spindle run time 27048 hours
    -rotary table size 1400 x1400 mm
    -max. table load capacity 12000 kgs

  LONGITUDINAL TRAVEL (X) 3000 MM VERTICAL TRAVEL (Y) 2000 MM CROSS TRAVEL (Z) 1000 MM DRILL TRAVEL (W) 700 MM ROTARY TABLE (B) 360 - 0.001 DEGREES BORING SPINDLE DIAM. 150 MM SPINDLE SPEEDS 50-2200 RPM SPINDLE TAPER 50 ISO SPINDLE MOTOR POWER 30 KW RAM SIZE 580-430 MM DATA MUST BE VERIFY STANDARD EQUIPMENT -COOLING THROUGH SPINDLE 60 BAR -TOOLS CHANGER 60 STATIONS -CNC HEIDENHAIN TNC I530 -SPINDLE RUN TIME 27048 HOURS -ROTARY TABLE SIZE 1400 X1400 MM -MAX. TABLE LOAD CAPACITY 12000 KGS
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-platform conveyor, conveyor band width 124cmlã¤nge 195cmeinlauf hã¶henverstellbarauslauf 80-110 cm height 90-120 cm height hã¶henverstellbarmit transfer belts foldable 35 cm langfahrbar1 bandgeschwindigkeitband of blue kunststoffkettengliedernauf requests we like to send you an offer!  PLATFORM CONVEYOR, CONVEYOR BAND WIDTH 124CML&ATILDE;&CURREN;NGE 195CMEINLAUF H&ATILDE;&PARA;HENVERSTELLBARAUSLAUF 80-110 CM HEIGHT 90-120 CM HEIGHT H&ATILDE;&PARA;HENVERSTELLBARMIT TRANSFER BELTS FOLDABLE 35 CM LANGFAHRBAR1 BANDGESCHWINDIGKEITBAND OF BLUE KUNSTSTOFFKETTENGLIEDERNAUF REQUESTS WE LIKE TO SEND YOU AN OFFER!
Vendedor: Bakers Good GmbH & Co. KG
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-bourg (stielow) stitch- and folding unit agr-p & pa-p<br/>  <br/>  year ca. 1984<br/>  agr-p stitching unit - 2 stitching heads acme - serial-no. 185695<br/>  pa-p folding unit - serial-no. 155253<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock - can be test-; good BOURG (STIELOW) STITCH- AND FOLDING UNIT AGR-P & PA-P

YEAR CA. 1984
AGR-P STITCHING UNIT - 2 STITCHING HEADS ACME - SERIAL-NO. 185695
PA-P FOLDING UNIT - SERIAL-NO. 155253

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK - CAN BE TEST-; GOOD
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc bed milling machine cme bf - 01 07-01-001 shipping time: immediately number: 07-01-001 manufacturer: cme type: bf - 01

machine data year: approx. 1998 l x w x h: ca. 3500 x 2500 x 2550 mm weight: 10000 kg

very good condition specifications control: heidenhain tnc 426 cb travel: x - axis: 1300 mm y - axis: approx. 700 mm z - axis: approx. 850 mm tischaufspannï¬?ã¤che: approx. 1400 x 1000 mm spindle: speed range: approx. 10-4000 rpm werkzeugaufna hme: iso 40 - din 2080 power: approx. 11 kw tool clamping: hydraulic feed & express ducts: feed range: approx. 1-15000 mm / min rapid traverse: approx. 15 m / min accessories â?¢ universal - huron - angle milling head â?¢ coolant system â?¢ rs 232 - slicer instead â?¢ hardened machine table â?¢ central lubrication â?¢ spindle chiller â?¢ direct - measurement system heidenhain - glass scale â?¢ machine documentation â?¢ foot switch for clamping â?¢ tiltable control panel â?¢ electronic handwheel â?¢ work light 

â?¢ feet â?¢ semi protection - cab â?¢ emergency

accessories on request price and other specifications on request CNC BED MILLING MACHINE CME BF - 01 07-01-001 SHIPPING TIME: IMMEDIATELY NUMBER: 07-01-001 MANUFACTURER: CME TYPE: BF - 01 MACHINE DATA YEAR: APPROX. 1998 L X W X H: CA. 3500 X 2500 X 2550 MM WEIGHT: 10000 KG VERY GOOD CONDITION SPECIFICATIONS CONTROL: HEIDENHAIN TNC 426 CB TRAVEL: X - AXIS: 1300 MM Y - AXIS: APPROX. 700 MM Z - AXIS: APPROX. 850 MM TISCHAUFSPANN&IUML;&NOT;?&ATILDE;&CURREN;CHE: APPROX. 1400 X 1000 MM SPINDLE: SPEED RANGE: APPROX. 10-4000 RPM WERKZEUGAUFNA HME: ISO 40 - DIN 2080 POWER: APPROX. 11 KW TOOL CLAMPING: HYDRAULIC FEED & EXPRESS DUCTS: FEED RANGE: APPROX. 1-15000 MM / MIN RAPID TRAVERSE: APPROX. 15 M / MIN ACCESSORIES &ACIRC;?&CENT; UNIVERSAL - HURON - ANGLE MILLING HEAD &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; RS 232 - SLICER INSTEAD &ACIRC;?&CENT; HARDENED MACHINE TABLE &ACIRC;?&CENT; CENTRAL LUBRICATION &ACIRC;?&CENT; SPINDLE CHILLER &ACIRC;?&CENT; DIRECT - MEASUREMENT SYSTEM HEIDENHAIN - GLASS SCALE &ACIRC;?&CENT; MACHINE DOCUMENTATION &ACIRC;?&CENT; FOOT SWITCH FOR CLAMPING &ACIRC;?&CENT; TILTABLE CONTROL PANEL &ACIRC;?&CENT; ELECTRONIC HANDWHEEL &ACIRC;?&CENT; WORK LIGHT &ACIRC;?&CENT; FEET &ACIRC;?&CENT; SEMI PROTECTION - CAB &ACIRC;?&CENT; EMERGENCY ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-output: 10000bottles/h, bottle formats: 0.35-1l, bottle diameter: 63.5-93mm, bottle height: 216.5-340mm.  OUTPUT: 10000BOTTLES/H, BOTTLE FORMATS: 0.35-1L, BOTTLE DIAMETER: 63.5-93MM, BOTTLE HEIGHT: 216.5-340MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 380 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cme f 6 bed milling machine. year 2002, retrofit in 2013. 
well maintained machine with heidenhain tnc 415 cnc control with portable hand wheel.

technical data:
movements:
x-axis: 4000 mm
y-axis: 1000 mm
z-axis: 1000 mm
clamping table: 4100 x 1000 mm
milling head is turnable +/-2.5 degrees
tool taper: iso 500
spindle speed: 20-4000 ump/min
toolchanger for: 20 tools 
2 gear automatic
spindle motor: 27.5 kwa
max. load table: 7000 kg.
dimensions lxwxh: 8500x4500x3100 mm
machine weight: 25 tons
the machine can be seen in operation     CME F 6 BED MILLING MACHINE. YEAR 2002, RETROFIT IN 2013. WELL MAINTAINED MACHINE WITH HEIDENHAIN TNC 415 CNC CONTROL WITH PORTABLE HAND WHEEL. TECHNICAL DATA: MOVEMENTS: X-AXIS: 4000 MM Y-AXIS: 1000 MM Z-AXIS: 1000 MM CLAMPING TABLE: 4100 X 1000 MM MILLING HEAD IS TURNABLE +/-2.5 DEGREES TOOL TAPER: ISO 500 SPINDLE SPEED: 20-4000 UMP/MIN TOOLCHANGER FOR: 20 TOOLS 2 GEAR AUTOMATIC SPINDLE MOTOR: 27.5 KWA MAX. LOAD TABLE: 7000 KG. DIMENSIONS LXWXH: 8500X4500X3100 MM MACHINE WEIGHT: 25 TONS THE MACHINE CAN BE SEEN IN OPERATION
Vendedor: S. H. Vaerktojsmaskiner ApS
Año de construcción: usado
Precio: 380 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-with heidenhain tnc 426 control, according to ce standard 89/392.
the machine has a standard configuration to the attached  with the attached specifications and tables.

technical data:
 longitudinal x axis: 1800 mm
 transverse y-axis: 1000 mm
 vertical z-axis: 1000 mm
 table clamping surface: 2000 x 850 mm
 speed continuously: 20000 mm/min
 3 axes

main spindle:
 engine: 875 nm 22 kw

spindle mounting: din 69871 sk 50
 speed: 50-4000 rpm

engines:
 longitudinal axis x: 27 nm
 transverse y-axis: 27 nm
 vertical z axis: 27 nm

motors:
 hydraulic motor: 1.10 kw
 central lubrication: 0.36 kw
 cooling motor: 1.10 kw

backgauge:
 x-axis: 50 x 20 mm
 y-axis: 50 x 10 mm
 z-axis: 50 x 10 mm

accessories:

universal milling head in 2 axes, 45 ° horizontal/vertical axis.
 m-functions. vertical axis through the screw clamp. 
 spindle mount sk 50 din 69871, 4000 rpm 22 kw

spindle positioning

tool changer with 24 tools mounted on the front of the stand.
double gripper system, loading and unloading only in vertical position

chip conveyor with a discharge height of approx. 1000 mm

electrical system is installed in a control cabinet on the machine. 
the electric control cabinet is equipped with a noise filter.

electrical operation is performed on the overhead panel-(a manual and a cnc control section)

hr-410 electronic hand wheel, which can be switched to any axis, is located on the instrument panel.

measuring system: glass scales in all axes with remote coded reference marks

complete cooling fluid with expiration nozzles on the cutter
     WITH HEIDENHAIN TNC 426 CONTROL, ACCORDING TO CE STANDARD 89/392. THE MACHINE HAS A STANDARD CONFIGURATION TO THE ATTACHED WITH THE ATTACHED SPECIFICATIONS AND TABLES. TECHNICAL DATA: LONGITUDINAL X AXIS: 1800 MM TRANSVERSE Y-AXIS: 1000 MM VERTICAL Z-AXIS: 1000 MM TABLE CLAMPING SURFACE: 2000 X 850 MM SPEED CONTINUOUSLY: 20000 MM/MIN 3 AXES MAIN SPINDLE: ENGINE: 875 NM 22 KW SPINDLE MOUNTING: DIN 69871 SK 50 SPEED: 50-4000 RPM ENGINES: LONGITUDINAL AXIS X: 27 NM TRANSVERSE Y-AXIS: 27 NM VERTICAL Z AXIS: 27 NM MOTORS: HYDRAULIC MOTOR: 1.10 KW CENTRAL LUBRICATION: 0.36 KW COOLING MOTOR: 1.10 KW BACKGAUGE: X-AXIS: 50 X 20 MM Y-AXIS: 50 X 10 MM Z-AXIS: 50 X 10 MM ACCESSORIES: UNIVERSAL MILLING HEAD IN 2 AXES, 45 ° HORIZONTAL/VERTICAL AXIS. M-FUNCTIONS. VERTICAL AXIS THROUGH THE SCREW CLAMP. SPINDLE MOUNT SK 50 DIN 69871, 4000 RPM 22 KW SPINDLE POSITIONING TOOL CHANGER WITH 24 TOOLS MOUNTED ON THE FRONT OF THE STAND. DOUBLE GRIPPER SYSTEM, LOADING AND UNLOADING ONLY IN VERTICAL POSITION CHIP CONVEYOR WITH A DISCHARGE HEIGHT OF APPROX. 1000 MM ELECTRICAL SYSTEM IS INSTALLED IN A CONTROL CABINET ON THE MACHINE. THE ELECTRIC CONTROL CABINET IS EQUIPPED WITH A NOISE FILTER. ELECTRICAL OPERATION IS PERFORMED ON THE OVERHEAD PANEL-(A MANUAL AND A CNC CONTROL SECTION) HR-410 ELECTRONIC HAND WHEEL, WHICH CAN BE SWITCHED TO ANY AXIS, IS LOCATED ON THE INSTRUMENT PANEL. MEASURING SYSTEM: GLASS SCALES IN ALL AXES WITH REMOTE CODED REFERENCE MARKS COMPLETE COOLING FLUID WITH EXPIRATION NOZZLES ON THE CUTTER
Vendedor: S. H. Vaerktojsmaskiner ApS
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-refrigeration system equipedd in compressors bitzer 4dc-5.2y (x 3), electrical control panel, pressure switch hp/lp, manometers hp/lp, suction site filter.

used refubrished 

product number: 4dc-5.2y (x 3)
nominal capacity:  43,5 kw (-10°c/+40°); 28,2 kw (-20°c/+40°c); 17,1 kw (-30°c/+40°c)
displacment: 3 x 26,9 m3/h
refrigerant: r404a
price: on request

czamara company has more refrigeration equipment in stock. if your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us.  

in stock we have branded equipment e.g. bitzer, copeland, carrier, gram, gea, lu-ve, dorin, güntner. 




 REFRIGERATION SYSTEM EQUIPEDD IN COMPRESSORS BITZER 4DC-5.2Y (X 3), ELECTRICAL CONTROL PANEL, PRESSURE SWITCH HP/LP, MANOMETERS HP/LP, SUCTION SITE FILTER. USED REFUBRISHED PRODUCT NUMBER: 4DC-5.2Y (X 3) NOMINAL CAPACITY: 43,5 KW (-10°C/+40°); 28,2 KW (-20°C/+40°C); 17,1 KW (-30°C/+40°C) DISPLACMENT: 3 X 26,9 M3/H REFRIGERANT: R404A PRICE: ON REQUEST CZAMARA COMPANY HAS MORE REFRIGERATION EQUIPMENT IN STOCK. IF YOUR FIRM IS INERESTED IN BUYING REFRIGERATION MACHINES CHECK OUR WEBSITE: SKLEP.CZAMARA.NET.PL AND CONTACT US. IN STOCK WE HAVE BRANDED EQUIPMENT E.G. BITZER, COPELAND, CARRIER, GRAM, GEA, LU-VE, DORIN, GüNTNER.
Vendedor: F.H.U. Urzadzenia Chlodnicze
Año de construcción: usado
Precio: 95 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1 egr stitch unit with 2 acme stapling heads<br/>  1 pa-able fold unit<br/>  1 display; good 1 EGR STITCH UNIT WITH 2 ACME STAPLING HEADS
1 PA-ABLE FOLD UNIT
1 DISPLAY; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-counter 2.47 million, good condition, fully functional<br/>   <br/>  gathering tower mac-8a<br/>  8 stops suction / blowing air investors with each 10 cm height<br/>  error - / double sheet control paper weights 23-230 g / qm<br/>  <br/>  stapling and folding unit spf 10­ii (with 2 x acme stapling heads) booklet and front cutter fc 10­ii<br/>  without offset delivery!; good COUNTER 2.47 MILLION, GOOD CONDITION, FULLY FUNCTIONAL

GATHERING TOWER MAC-8A
8 STOPS SUCTION / BLOWING AIR INVESTORS WITH EACH 10 CM HEIGHT
ERROR - / DOUBLE SHEET CONTROL PAPER WEIGHTS 23-230 G / QM

STAPLING AND FOLDING UNIT SPF 10­II (WITH 2 X ACME STAPLING HEADS) BOOKLET AND FRONT CUTTER FC 10­II
WITHOUT OFFSET DELIVERY!; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-number of spindles: 6 <br/>spindle passage: 32 mm<br/>turning length: 152 mm<br/>speed: 200-2800 u/min.<br/>turning diameter: 32 mm<br/>feed: werkstoff: 254 mm<br/>accessories: <br/>multi edge turning, univ. thread cutting attachment,<br/>strehleinrichtung, chip conveyor, 1 set collets, set of change wheels<br/><br/><br/><br/> NUMBER OF SPINDLES: 6
SPINDLE PASSAGE: 32 MM
TURNING LENGTH: 152 MM
SPEED: 200-2800 U/MIN.
TURNING DIAMETER: 32 MM
FEED: WERKSTOFF: 254 MM
ACCESSORIES:
MULTI EDGE TURNING, UNIV. THREAD CUTTING ATTACHMENT,
STREHLEINRICHTUNG, CHIP CONVEYOR, 1 SET COLLETS, SET OF CHANGE WHEELS



Vendedor: Gromag AG
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-roots blowers rkr, type k50r (z/1). diameter 100 mm. power 15 kw, machine-no. 2342. 9 cubicmetre/min, 450 mbar, 2620 rpm. with two silencers, check valve. without pressure relief valve. good condition.  ROOTS BLOWERS RKR, TYPE K50R (Z/1). DIAMETER 100 MM. POWER 15 KW, MACHINE-NO. 2342. 9 CUBICMETRE/MIN, 450 MBAR, 2620 RPM. WITH TWO SILENCERS, CHECK VALVE. WITHOUT PRESSURE RELIEF VALVE. GOOD CONDITION.
Vendedor: Rückert Mühlen- und Anlagenbau GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter: 102 mm<br/>x-travel: 1000 mm<br/>y-travel: 1250 mm<br/>z-travel: 1600 mm<br/>tool taper: iso 50 din 2048<br/>spindle stroke: 710 mm<br/>spindle turning speed range: 8 - 1600 u/min<br/>table-size: 1000 x 1120 mm<br/>table rotation: 360 °<br/>max. workpiece weight: 2500 kg<br/>feed range: 0,8 - 2000 mm/min<br/>rapid traverse: 3,15 m/min<br/>feed power: 16000 n<br/>spindle drive: 11 kw<br/>total power requirement: 23 kw<br/>weight of the machine ca.: 9,3 t<br/>dimensions of the machine ca.: 5,3 x 3,8 x 3140 m<br/>with point-to-point control heidenhain, tnc 131<br/>electrical cabinet reliance<br/>acme thread spindle<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 102 MM
X-TRAVEL: 1000 MM
Y-TRAVEL: 1250 MM
Z-TRAVEL: 1600 MM
TOOL TAPER: ISO 50 DIN 2048
SPINDLE STROKE: 710 MM
SPINDLE TURNING SPEED RANGE: 8 - 1600 U/MIN
TABLE-SIZE: 1000 X 1120 MM
TABLE ROTATION: 360 °
MAX. WORKPIECE WEIGHT: 2500 KG
FEED RANGE: 0,8 - 2000 MM/MIN
RAPID TRAVERSE: 3,15 M/MIN
FEED POWER: 16000 N
SPINDLE DRIVE: 11 KW
TOTAL POWER REQUIREMENT: 23 KW
WEIGHT OF THE MACHINE CA.: 9,3 T
DIMENSIONS OF THE MACHINE CA.: 5,3 X 3,8 X 3140 M
WITH POINT-TO-POINT CONTROL HEIDENHAIN, TNC 131
ELECTRICAL CABINET RELIANCE
ACME THREAD SPINDLE




Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-portable measurement tool for thermal printing plates:<br/> <br>- measurement of dot percentage<br/> <br>- simple using<br/> <br>- calibration directly at the plate<br/> <br>- with 9 volt battery<br/> <br>- 3-character lcd display<br/> <br>- ccd array camera<br/> <br>- multicolor lec indicator lights when reading or calibrating PORTABLE MEASUREMENT TOOL FOR THERMAL PRINTING PLATES:

- MEASUREMENT OF DOT PERCENTAGE

- SIMPLE USING

- CALIBRATION DIRECTLY AT THE PLATE

- WITH 9 VOLT BATTERY

- 3-CHARACTER LCD DISPLAY

- CCD ARRAY CAMERA

- MULTICOLOR LEC INDICATOR LIGHTS WHEN READING OR CALIBRATING
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-<br>table length: 2200 mm<br>table width: 850 mm<br>longitudinal x: 2000 mm<br>cross y: 1000 mm<br>vertical z: 1000 mm<br>positions atc: 10  <br>cnc brand: heidenhain<br>cnc model: tnc410 <br><p>make   cme spain</p>
<p>type     bf 03</p>
<p>year    1999</p>
<p>specifications</p>
<p>x - travel     2000 mm</p>
<p>y - travel     1000 mm</p>
<p>z - travel      1000 mm</p>
<p>bed / plano / portal / moving column</p>
<p>bed milling machine          </p>
<p>controll      heidenhain tnc 410</p>
<p>table length x width    2200 x 850 mm</p>
<p>table load in kg      4000 kg</p>
<p>spindle taper      bt 50</p>
<p>kw power on spindle    22 kw</p>
<p>spindle speeds / ranges    3000 ? rpm</p>
<p>atc tool changer   atc 10</p>
<p>coolant true spindle / bar    10 bar</p>
<p>number off controlled axis           3 + 2</p>
<p>cnc automatic milling head / gr.    2.5 gr = 144 x 144 gr</p>
<p>dimensions</p>
<p>length    8000 mm</p>
<p>width     4500 mm</p>
<p>height     3400 mm</p>
<p> 
TABLE LENGTH: 2200 MM
TABLE WIDTH: 850 MM
LONGITUDINAL X: 2000 MM
CROSS Y: 1000 MM
VERTICAL Z: 1000 MM
POSITIONS ATC: 10  
CNC BRAND: HEIDENHAIN
CNC MODEL: TNC410

MAKE&NBSP; &NBSP;CME SPAIN

TYPE&NBSP; &NBSP; &NBSP;BF 03

YEAR&NBSP; &NBSP; 1999

SPECIFICATIONS

X - TRAVEL&NBSP; &NBSP; &NBSP;2000 MM

Y - TRAVEL&NBSP; &NBSP; &NBSP;1000 MM

Z - TRAVEL&NBSP; &NBSP; &NBSP; 1000 MM

BED / PLANO / PORTAL / MOVING COLUMN

BED MILLING MACHINE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;

CONTROLL&NBSP; &NBSP; &NBSP; HEIDENHAIN TNC 410

TABLE LENGTH X WIDTH&NBSP; &NBSP; 2200 X 850 MM

TABLE LOAD IN KG&NBSP; &NBSP; &NBSP; 4000 KG

SPINDLE TAPER&NBSP; &NBSP; &NBSP; BT 50

KW POWER ON SPINDLE&NBSP; &NBSP; 22 KW

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; 3000 ? RPM

ATC TOOL CHANGER&NBSP; &NBSP;ATC 10

COOLANT TRUE SPINDLE / BAR&NBSP; &NBSP; 10 BAR

NUMBER OFF CONTROLLED AXIS&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP;3 + 2

CNC AUTOMATIC MILLING HEAD / GR.&NBSP; &NBSP; 2.5 GR = 144 X 144 GR

DIMENSIONS

LENGTH&NBSP; &NBSP; 8000 MM

WIDTH&NBSP; &NBSP; &NBSP;4500 MM

HEIGHT&NBSP; &NBSP; &NBSP;3400 MM

&NBSP;

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-complete pet line for 1.5-2.0 l 18.000 b/h

1.box tipper
year: 2004
2.blowing machine blomax 12
year: 2003
3.mixer famix
year: 2003
4.tribloc metalnova lg vmag
year: 2009
5.labeller krones contiroll 600 15
year: 2006
6.shrink packaging machine vega ocme
year: 2004
7.handle applicator twin pack
year: 2010
8.palletizer acmi
year: 2006
9.conveyors
10.printer for bottle marking linx
11.palette wrapper gema
year: 2005
  COMPLETE PET LINE FOR 1.5-2.0 L 18.000 B/H 1.BOX TIPPER YEAR: 2004 2.BLOWING MACHINE BLOMAX 12 YEAR: 2003 3.MIXER FAMIX YEAR: 2003 4.TRIBLOC METALNOVA LG VMAG YEAR: 2009 5.LABELLER KRONES CONTIROLL 600 15 YEAR: 2006 6.SHRINK PACKAGING MACHINE VEGA OCME YEAR: 2004 7.HANDLE APPLICATOR TWIN PACK YEAR: 2010 8.PALLETIZER ACMI YEAR: 2006 9.CONVEYORS 10.PRINTER FOR BOTTLE MARKING LINX 11.PALETTE WRAPPER GEMA YEAR: 2005
Vendedor: PW Joanna
Año de construcción: usado
Ubicación: Land-<br>table length: 1400 mm<br>table width: 300 mm<br>longitudinal x: 900 mm<br>cross y: 350 mm<br>vertical z: 500 mm <br><p>make cme fu 2 mu</p>
<p>type fu 2 universal</p>
<p>year 1992</p>
<p>universal horizontal and vertical milling machine</p>
<p>table length (mm)l = 1.400</p>
<p>table width (mm)w = 300</p>
<p>longitudinal x (mm)x = 900</p>
<p>cross y (mm)y = 350</p>
<p>vertical z (mm)z = 500</p>
<p>horizontal & vertical</p>
<p>feeds in 3 axis</p>
<p>huron type milling head</p>
<p>
TABLE LENGTH: 1400 MM
TABLE WIDTH: 300 MM
LONGITUDINAL X: 900 MM
CROSS Y: 350 MM
VERTICAL Z: 500 MM

MAKE CME FU 2 MU

TYPE FU 2 UNIVERSAL

YEAR 1992

UNIVERSAL HORIZONTAL AND VERTICAL MILLING MACHINE

TABLE LENGTH (MM)L = 1.400

TABLE WIDTH (MM)W = 300

LONGITUDINAL X (MM)X = 900

CROSS Y (MM)Y = 350

VERTICAL Z (MM)Z = 500

HORIZONTAL & VERTICAL

FEEDS IN 3 AXIS

HURON TYPE MILLING HEAD

Vendedor: Mach4metal
Año de construcción: usado
Precio: 500 €
Ubicación: Land-wire stitcher
acme champion
model	a
year	1960
capacity	6 mm
details	for blocks & pamphlets
available	direct
  WIRE STITCHER ACME CHAMPION MODEL A YEAR 1960 CAPACITY 6 MM DETAILS FOR BLOCKS & PAMPHLETS AVAILABLE DIRECT
Vendedor: ITK Graphic Machinery
Año de construcción: usado
Ubicación: Land-<br>spindle diameter: 50 mm<br>cross x: 3000 mm<br>vertical y: 2000 mm<br>table length: 1400 mm<br>table width: 1400 mm<br>positions atc: 60  <br>number of pallets: 0  <br>cnc brand: heidenhain<br>cnc model: itnc 530 <br><p>controll  itnc 530</p>
<p>floor or table type borer  </p>
<p>table borer   x - travel   3000 mm</p>
<p>y - travel   2000 mm</p>
<p>z - travel  1000 mm</p>
<p>w - travel   700 mm</p>
<p>spindle diameter Ø  150 mm</p>
<p>spindle taper  iso 50</p>
<p>kw power on spindle  30 kw</p>
<p>spindle speeds / ranges  2200 rpm</p>
<p>table length x width   1400 x 1400 mm</p>
<p>table load in kg  5000 kg</p>
<p>atc tool changer  60</p>
<p>coolant true spindle / bar  60 bar</p>
<p>number off controlled axis  5</p>
<p>
SPINDLE DIAMETER: 50 MM
CROSS X: 3000 MM
VERTICAL Y: 2000 MM
TABLE LENGTH: 1400 MM
TABLE WIDTH: 1400 MM
POSITIONS ATC: 60  
NUMBER OF PALLETS: 0  
CNC BRAND: HEIDENHAIN
CNC MODEL: ITNC 530

CONTROLL &NBSP;ITNC 530

FLOOR OR TABLE TYPE BORER &NBSP;

TABLE BORER &NBSP; X - TRAVEL &NBSP; 3000 MM

Y - TRAVEL &NBSP; 2000 MM

Z - TRAVEL &NBSP;1000 MM

W - TRAVEL &NBSP; 700 MM

SPINDLE DIAMETER Ø &NBSP;150 MM

SPINDLE TAPER &NBSP;ISO 50

KW POWER ON SPINDLE &NBSP;30 KW

SPINDLE SPEEDS / RANGES &NBSP;2200 RPM

TABLE LENGTH X WIDTH &NBSP; 1400 X 1400 MM

TABLE LOAD IN KG &NBSP;5000 KG

ATC TOOL CHANGER &NBSP;60

COOLANT TRUE SPINDLE / BAR &NBSP;60 BAR

NUMBER OFF CONTROLLED AXIS &NBSP;5

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-three roll calendar 
manuf: meccaniche moderne
roll size 850 wide x 300mm diam.
barco rotary joints
motorised nip top and middle
silicone calender
sicme motor
14kw
1200 rpm
with grease pump
with control panel  THREE ROLL CALENDAR MANUF: MECCANICHE MODERNE ROLL SIZE 850 WIDE X 300MM DIAM. BARCO ROTARY JOINTS MOTORISED NIP TOP AND MIDDLE SILICONE CALENDER SICME MOTOR 14KW 1200 RPM WITH GREASE PUMP WITH CONTROL PANEL
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-<br>table length: 1400 mm<br>table width: 1400 mm<br>longitudinal x: 3000 mm<br>cross y: 2000 mm<br>vertical z: 1000 mm<br>positions atc: 60  <br>cnc brand: heidenhain<br>cnc model: i tnc 530 in 5 axis <br><p>specifications</p>
<p>x - travel   3000 mm</p>
<p>y - travel  2000 mm</p>
<p>z - travel   1000 mm</p>
<p>w - travel  700 mm</p>
<p>bed / plano / portal / moving column   milling & boring</p>
<p>controll   itnc 530 in 5 axis</p>
<p>table length x width   1400 x 1400 mm</p>
<p>table load in kg   5000 kg</p>
<p>spindle taper  iso 50</p>
<p>kw power on spindle  30 kw</p>
<p>spindle speeds / ranges  2200 rpm</p>
<p>atc tool changer  60</p>
<p>coolant true spindle / bar  60 bar bar</p>
<p>number off controlled axis  5</p>
<p>
TABLE LENGTH: 1400 MM
TABLE WIDTH: 1400 MM
LONGITUDINAL X: 3000 MM
CROSS Y: 2000 MM
VERTICAL Z: 1000 MM
POSITIONS ATC: 60  
CNC BRAND: HEIDENHAIN
CNC MODEL: I TNC 530 IN 5 AXIS

SPECIFICATIONS

X - TRAVEL &NBSP; 3000 MM

Y - TRAVEL &NBSP;2000 MM

Z - TRAVEL &NBSP; 1000 MM

W - TRAVEL &NBSP;700 MM

BED / PLANO / PORTAL / MOVING COLUMN &NBSP; MILLING & BORING

CONTROLL &NBSP; ITNC 530 IN 5 AXIS

TABLE LENGTH X WIDTH &NBSP; 1400 X 1400 MM

TABLE LOAD IN KG &NBSP; 5000 KG

SPINDLE TAPER &NBSP;ISO 50

KW POWER ON SPINDLE &NBSP;30 KW

SPINDLE SPEEDS / RANGES &NBSP;2200 RPM

ATC TOOL CHANGER &NBSP;60

COOLANT TRUE SPINDLE / BAR &NBSP;60 BAR BAR

NUMBER OFF CONTROLLED AXIS &NBSP;5

Vendedor: Mach4metal
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-compacta sl 5035 automatic l-bar sealer integrated with shrink tunnel from 1998.

speed rated to 35 products per minute depending on the materials and application

the machine has very little hours. has been storaged for over 6 years
supplied with all original docmentation

conveyor width: 350mm

year of production: 1998
serial number: 50161018 

condition: good

dimensions: 2.250mm x 900mm & 2.000mm (lxw&h) COMPACTA SL 5035 AUTOMATIC L-BAR SEALER INTEGRATED WITH SHRINK TUNNEL FROM 1998. SPEED RATED TO 35 PRODUCTS PER MINUTE DEPENDING ON THE MATERIALS AND APPLICATION THE MACHINE HAS VERY LITTLE HOURS. HAS BEEN STORAGED FOR OVER 6 YEARS SUPPLIED WITH ALL ORIGINAL DOCMENTATION CONVEYOR WIDTH: 350MM YEAR OF PRODUCTION: 1998 SERIAL NUMBER: 50161018 CONDITION: GOOD DIMENSIONS: 2.250MM X 900MM & 2.000MM (LXW&H)
Vendedor: CE-Pharmamachinery
Año de construcción: usado
Ubicación: Land-<br>table length: 9500 mm<br>table width: 1200 mm<br>longitudinal x: 9000 mm<br>cross y: 1500 mm<br>vertical z: 1500 mm<br>positions atc: 60  <br>cnc brand: heidenhain<br>cnc model: tnc 430 <br><p>mach-id   3515</p>
<p>make   cme spain</p>
<p>type  fcm 9000</p>
<p>year   2000</p>
<p>specifications</p>
<p>x - travel  9000 mm</p>
<p>y - travel  1500 mm</p>
<p>z - travel  1500 mm</p>
<p>bed / plano / portal / moving column  moving column bed milling</p>
<p>controll   tnc 430</p>
<p>table length x width  9500 x 1200 mm</p>
<p>table load in kg   5000 / m kg</p>
<p>spindle taper  bt 50</p>
<p>kw power on spindle  40 kw</p>
<p>spindle speeds / ranges   3000 rpm</p>
<p>atc tool changer   60</p>
<p>coolant true spindle / bar  20 bar</p>
<p>number off controlled axis   3 + 2 = 5 axis</p>
<p>cnc automatic milling head / gr.1 gr. orthogonal</p>
<p>dimensions</p>
<p>length    16000 mm</p>
<p>width   6000 mm</p>
<p>height   7000 mm</p>
<p>cme fcm 9000 x 1500 x 1500 mobile column milling machine</p>
<p>
TABLE LENGTH: 9500 MM
TABLE WIDTH: 1200 MM
LONGITUDINAL X: 9000 MM
CROSS Y: 1500 MM
VERTICAL Z: 1500 MM
POSITIONS ATC: 60  
CNC BRAND: HEIDENHAIN
CNC MODEL: TNC 430

MACH-ID &NBSP; 3515

MAKE &NBSP; CME SPAIN

TYPE &NBSP;FCM 9000

YEAR &NBSP; 2000

SPECIFICATIONS

X - TRAVEL &NBSP;9000 MM

Y - TRAVEL &NBSP;1500 MM

Z - TRAVEL &NBSP;1500 MM

BED / PLANO / PORTAL / MOVING COLUMN &NBSP;MOVING COLUMN BED MILLING

CONTROLL &NBSP; TNC 430

TABLE LENGTH X WIDTH &NBSP;9500 X 1200 MM

TABLE LOAD IN KG &NBSP; 5000 / M KG

SPINDLE TAPER &NBSP;BT 50

KW POWER ON SPINDLE &NBSP;40 KW

SPINDLE SPEEDS / RANGES &NBSP; 3000 RPM

ATC TOOL CHANGER &NBSP; 60

COOLANT TRUE SPINDLE / BAR &NBSP;20 BAR

NUMBER OFF CONTROLLED AXIS &NBSP; 3 + 2 = 5 AXIS

CNC AUTOMATIC MILLING HEAD / GR.1 GR. ORTHOGONAL

DIMENSIONS

LENGTH &NBSP; &NBSP;16000 MM

WIDTH &NBSP; 6000 MM

HEIGHT &NBSP; 7000 MM

CME FCM 9000 X 1500 X 1500 MOBILE COLUMN MILLING MACHINE

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-cnc bed type milling machine
manufacturer: cme
type: fs 2
year of construction: 2001
cnc control: heidenhain 426

traverse paths: x/y/z = 2000 x 1000 x 1000 mm
tool holder: iso50 CNC BED TYPE MILLING MACHINE MANUFACTURER: CME TYPE: FS 2 YEAR OF CONSTRUCTION: 2001 CNC CONTROL: HEIDENHAIN 426 TRAVERSE PATHS: X/Y/Z = 2000 X 1000 X 1000 MM TOOL HOLDER: ISO50
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-sr  65064 --foto-elektrisch meetsysteem in x,y en zvv hogesnelheidsfreeskop tot 24 000 rpm (laatste foto) i-bag ms1 x hoogfrekwentiegenerator type 9533-24 3 x 380 v1 x gelijkstroom modulator  type fcc1 x werkunit type 45 kw ab1 x verpulver-aggregaat2 x klemgereedsschap ski 2515 gereedschappen (2-tandig)1  meeneemschijfsystème de mesure photo-électique sur x,y et zpourvue dune broche à grande vitesse jusqua 24 000 u/min (dernier photo)1 x générateur de haute fréquence type 9533-24 3 380 v1 x freinage courant continue type fcc1 x unité de service type 45 kw ab1 x agrégat de pulvérisation2 x tassaux portepince ski 2515 outils à 2 dents1 flasque daccouplement SR 65064 --FOTO-ELEKTRISCH MEETSYSTEEM IN X,Y EN ZVV HOGESNELHEIDSFREESKOP TOT 24 000 RPM (LAATSTE FOTO) I-BAG MS1 X HOOGFREKWENTIEGENERATOR TYPE 9533-24 3 X 380 V1 X GELIJKSTROOM MODULATOR TYPE FCC1 X WERKUNIT TYPE 45 KW AB1 X VERPULVER-AGGREGAAT2 X KLEMGEREEDSSCHAP SKI 2515 GEREEDSCHAPPEN (2-TANDIG)1 MEENEEMSCHIJFSYSTèME DE MESURE PHOTO-éLECTIQUE SUR X,Y ET ZPOURVUE DUNE BROCHE à GRANDE VITESSE JUSQUA 24 000 U/MIN (DERNIER PHOTO)1 X GéNéRATEUR DE HAUTE FRéQUENCE TYPE 9533-24 3 380 V1 X FREINAGE COURANT CONTINUE TYPE FCC1 X UNITé DE SERVICE TYPE 45 KW AB1 X AGRéGAT DE PULVéRISATION2 X TASSAUX PORTEPINCE SKI 2515 OUTILS à 2 DENTS1 FLASQUE DACCOUPLEMENT
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-cattinair rotoclean g- 8 spray

manufacture : cattinair / france
year : 1998
type: roto g
serial no rg 0009
e 019801920


technical specification:

•	8 arm carousel with 8 guns
•	conveyor – with 9 belts (120mm )
•	for working pieces: width= 1250mm
•	lenght 4.900 -6600mm
•	linear speed 2,4-10m/min
•	electric power = 0,75 kw
•	recovery cleaning system
•	diameter ( centre distance of axes of the spray gun holder arm ): 1820mm
•	height betwenn conveyor and spray gun nozzle: 50-160mm
•	incliation of spray guns: 350 ,450 , 550
•	rotation speed 10-30 rpm
•	motorised vertical displacment spedd : 220mm /mn
•	power: 4,9 kw
•	quantity of air extracted= 8500 m3/h
•	weight: 3400 kg
•	compressed air: 6 bars

+ 3 kremelin colour pumps
year 1998


very less in use
 CATTINAIR ROTOCLEAN G- 8 SPRAY MANUFACTURE : CATTINAIR / FRANCE YEAR : 1998 TYPE: ROTO G SERIAL NO RG 0009 E 019801920 TECHNICAL SPECIFICATION: • 8 ARM CAROUSEL WITH 8 GUNS • CONVEYOR – WITH 9 BELTS (120MM ) • FOR WORKING PIECES: WIDTH= 1250MM • LENGHT 4.900 -6600MM • LINEAR SPEED 2,4-10M/MIN • ELECTRIC POWER = 0,75 KW • RECOVERY CLEANING SYSTEM • DIAMETER ( CENTRE DISTANCE OF AXES OF THE SPRAY GUN HOLDER ARM ): 1820MM • HEIGHT BETWENN CONVEYOR AND SPRAY GUN NOZZLE: 50-160MM • INCLIATION OF SPRAY GUNS: 350 ,450 , 550 • ROTATION SPEED 10-30 RPM • MOTORISED VERTICAL DISPLACMENT SPEDD : 220MM /MN • POWER: 4,9 KW • QUANTITY OF AIR EXTRACTED= 8500 M3/H • WEIGHT: 3400 KG • COMPRESSED AIR: 6 BARS + 3 KREMELIN COLOUR PUMPS YEAR 1998 VERY LESS IN USE
Vendedor: Chicagowood Malax
Año de construcción: usado
Ubicación: Land-max distance between spindle - table: 1300 mmradial displacment of the planing surface: 275 mmmax distance between bed - lunette: 3150 mm48 speeds on spindle > 1000 rpm39 speeds on bed > 180 rpmrapid displacement for all movements: 2500 mm MAX DISTANCE BETWEEN SPINDLE - TABLE: 1300 MMRADIAL DISPLACMENT OF THE PLANING SURFACE: 275 MMMAX DISTANCE BETWEEN BED - LUNETTE: 3150 MM48 SPEEDS ON SPINDLE > 1000 RPM39 SPEEDS ON BED > 180 RPMRAPID DISPLACEMENT FOR ALL MOVEMENTS: 2500 MM
Vendedor: APT International
Año de construcción: usado
Precio: 80 €
Ubicación: Land-extra shelves!
 end stand required at the end of the regalsnur &amp;euro; 22,-incl. fuã?haken in the photos are not included, but optional for purchase.
 this used tegometall shelving we put together from current used parts, which are available with us each time in the camp. therefore, the mass of the soil and the amount may vary. you get everything at a height in a reasonable state of applicable immediately in the business anyway. of course there are the usual use traces of vorbesitzers.beispiel: eh 8 units of 125 cm = 10m more info: height: 180 cm - 210 cm depending on the availability of color: floors, back panels, consoles: white, jura white, grey, subject to availability color: column / leg: white, jura white, grey , after availability facilities: ground/feet: 57/47 according to verfã¼gbarkeit10m example included end stand setbestehend from: columns: 9feet 9bã¶den: 8lochrã¼ckwã¤nde 32 smooth backs 8 a rear wall unit includes:-4 x hole plate h40 cm 1 x smooth h10 - 40 cmendstã¤nder set (consisting of column and foot): only &amp;euro; 22,-/ piece. more shelves 1250/370 mm with 2 consoles / lfm: only &amp;euro; 9.60 optionally available hook for this. EXTRA SHELVES! END STAND REQUIRED AT THE END OF THE REGALSNUR &AMP;EURO; 22,-INCL. FU&ATILDE;?HAKEN IN THE PHOTOS ARE NOT INCLUDED, BUT OPTIONAL FOR PURCHASE. THIS USED TEGOMETALL SHELVING WE PUT TOGETHER FROM CURRENT USED PARTS, WHICH ARE AVAILABLE WITH US EACH TIME IN THE CAMP. THEREFORE, THE MASS OF THE SOIL AND THE AMOUNT MAY VARY. YOU GET EVERYTHING AT A HEIGHT IN A REASONABLE STATE OF APPLICABLE IMMEDIATELY IN THE BUSINESS ANYWAY. OF COURSE THERE ARE THE USUAL USE TRACES OF VORBESITZERS.BEISPIEL: EH 8 UNITS OF 125 CM = 10M MORE INFO: HEIGHT: 180 CM - 210 CM DEPENDING ON THE AVAILABILITY OF COLOR: FLOORS, BACK PANELS, CONSOLES: WHITE, JURA WHITE, GREY, SUBJECT TO AVAILABILITY COLOR: COLUMN / LEG: WHITE, JURA WHITE, GREY , AFTER AVAILABILITY FACILITIES: GROUND/FEET: 57/47 ACCORDING TO VERF&ATILDE;&FRAC14;GBARKEIT10M EXAMPLE INCLUDED END STAND SETBESTEHEND FROM: COLUMNS: 9FEET 9B&ATILDE;&PARA;DEN: 8LOCHR&ATILDE;&FRAC14;CKW&ATILDE;&CURREN;NDE 32 SMOOTH BACKS 8 A REAR WALL UNIT INCLUDES:-4 X HOLE PLATE H40 CM 1 X SMOOTH H10 - 40 CMENDST&ATILDE;&CURREN;NDER SET (CONSISTING OF COLUMN AND FOOT): ONLY &AMP;EURO; 22,-/ PIECE. MORE SHELVES 1250/370 MM WITH 2 CONSOLES / LFM: ONLY &AMP;EURO; 9.60 OPTIONALLY AVAILABLE HOOK FOR THIS.
Vendedor: HERATEC Handels GmbH & Co. KG
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-shrink packer ocme double lane
performance 70 + 70 pack/min
control siemens s 7   SHRINK PACKER OCME DOUBLE LANE PERFORMANCE 70 + 70 PACK/MIN CONTROL SIEMENS S 7
Vendedor: B.M.G.e.K
Año de construcción: usado
Ubicación: Land-general characteristics  
distance spindle axis column  300 mm  
other features  
total power  2.65 kw  
Ø spindle  50 mm  
 GENERAL CHARACTERISTICS DISTANCE SPINDLE AXIS COLUMN 300 MM OTHER FEATURES TOTAL POWER 2.65 KW Ø SPINDLE 50 MM
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-características de la mesa  
superficie de la mesa  450 x 300 mm  
características generales  
carrera del vástago  200 mm  
caudal de la bomba  18l/mm  
escote  160 mm  
presión máxima de trabajo  70 kg/cm2  
dimensiones y pesos  
alto  2.500mm  
ancho  1.000mm  
largo  1.700mm  
características eléctricas  
voltaje  220/380 v  
otras características  
accesorios incluidos  dos mesas de ranura en t.  
fuerza  5 tn  
potencia total  4 cv  
Ø del vástago  70 mm  
 CARACTERíSTICAS DE LA MESA SUPERFICIE DE LA MESA 450 X 300 MM CARACTERíSTICAS GENERALES CARRERA DEL VáSTAGO 200 MM CAUDAL DE LA BOMBA 18L/MM ESCOTE 160 MM PRESIóN MáXIMA DE TRABAJO 70 KG/CM2 DIMENSIONES Y PESOS ALTO 2.500MM ANCHO 1.000MM LARGO 1.700MM CARACTERíSTICAS ELéCTRICAS VOLTAJE 220/380 V OTRAS CARACTERíSTICAS ACCESORIOS INCLUIDOS DOS MESAS DE RANURA EN T. FUERZA 5 TN POTENCIA TOTAL 4 CV Ø DEL VáSTAGO 70 MM
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)