993 ofertas

Año de construcción: usado
Precio: 25.000 €
Ubicación: Land--folder gluer grassi studio 80
-max width 80 cms.,year 2001
-can do: linear gluing, crash lock bottom, four glue points with 4 spray guns
-ero glue system, deca reader, vibrant feeder
-delivery with automatic pressure system
-lateral photocells barrier , in production till march
 -FOLDER GLUER GRASSI STUDIO 80 -MAX WIDTH 80 CMS.,YEAR 2001 -CAN DO: LINEAR GLUING, CRASH LOCK BOTTOM, FOUR GLUE POINTS WITH 4 SPRAY GUNS -ERO GLUE SYSTEM, DECA READER, VIBRANT FEEDER -DELIVERY WITH AUTOMATIC PRESSURE SYSTEM -LATERAL PHOTOCELLS BARRIER , IN PRODUCTION TILL MARCH
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-internal diameter: ca. 250 <br/>grinding depth: 200 mm<br/>swing diameter: 440 mm<br/>control: fanuc 16 tb <br/>max. workpiece weight between centres: 150 kg<br/>spindle speeds: 1 - 1.000 u/min.<br/>c-axis for work spindle: rotation speed: max. 650 rpm<br/>weight of the machine ca.: 5.700 kg<br/>installation area: 5,2 x 4,0 m x 2,8 m mm<br/>internal grinding machine with external and face grinding device<br/>good condition - inspection under power possibl<br/>  <br/>werkpiece headstock over paper band filter<br/>- workpiece weight between centres max. 150 kg<br/>- speed range 1-1000 rpm, at c-axis 650 rpm<br/><br/>workpiece table<br/>- including air lift-off and hydraulic clamping <br/>- swivel range +/- 30°<br/><br/>internal grinding table<br/>- with four tool positions<br/>- indexing every 90°<br/>- swivel movement cnc-controlled<br/>    <br/>cross slide z/x:<br/>- cross axis x<br/>  travel 120 mm<br/>  feed speed 0.001 - 5000 mm/min<br/>- longitudinal axis z<br/>  travel 500 mm<br/>  feed speed 0.001 - 10000 mm/min<br/><br/>studer operating system release b<br/>- setup cycles operator-guided<br/>- machining cycles for diameter-, shoulder-, cone machining and <br/>  free contours (x/z)<br/>- automatic dressing including free disc shape<br/>- switch-on clock function<br/>- programmable robot cycle process<br/>    <br/>coolant device<br/>    for grinding and dressing, including coolant valve for<br/>    internal grinding cycle<br/><br/>frequency<br/>    30 kva, for driving 1-4 high-speed internal grinding spindles<br/><br/>including various accessories<br/>- three-jaw chuck rota s plus 250 - 62<br/>- 4 nos. collet chuck device including collet chucks<br/>- 1 external and 3 internal grinding spindles<br/>- 1 steady rest<br/>- coolant with paper filter<br/>- oil mist exhauster<br/>- documentation<br/><br/><br/><br/><br/> INTERNAL DIAMETER: CA. 250
GRINDING DEPTH: 200 MM
SWING DIAMETER: 440 MM
CONTROL: FANUC 16 TB
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 150 KG
SPINDLE SPEEDS: 1 - 1.000 U/MIN.
C-AXIS FOR WORK SPINDLE: ROTATION SPEED: MAX. 650 RPM
WEIGHT OF THE MACHINE CA.: 5.700 KG
INSTALLATION AREA: 5,2 X 4,0 M X 2,8 M MM
INTERNAL GRINDING MACHINE WITH EXTERNAL AND FACE GRINDING DEVICE
GOOD CONDITION - INSPECTION UNDER POWER POSSIBL

WERKPIECE HEADSTOCK OVER PAPER BAND FILTER
- WORKPIECE WEIGHT BETWEEN CENTRES MAX. 150 KG
- SPEED RANGE 1-1000 RPM, AT C-AXIS 650 RPM

WORKPIECE TABLE
- INCLUDING AIR LIFT-OFF AND HYDRAULIC CLAMPING
- SWIVEL RANGE +/- 30°

INTERNAL GRINDING TABLE
- WITH FOUR TOOL POSITIONS
- INDEXING EVERY 90°
- SWIVEL MOVEMENT CNC-CONTROLLED

CROSS SLIDE Z/X:
- CROSS AXIS X
TRAVEL 120 MM
FEED SPEED 0.001 - 5000 MM/MIN
- LONGITUDINAL AXIS Z
TRAVEL 500 MM
FEED SPEED 0.001 - 10000 MM/MIN

STUDER OPERATING SYSTEM RELEASE B
- SETUP CYCLES OPERATOR-GUIDED
- MACHINING CYCLES FOR DIAMETER-, SHOULDER-, CONE MACHINING AND
FREE CONTOURS (X/Z)
- AUTOMATIC DRESSING INCLUDING FREE DISC SHAPE
- SWITCH-ON CLOCK FUNCTION
- PROGRAMMABLE ROBOT CYCLE PROCESS

COOLANT DEVICE
FOR GRINDING AND DRESSING, INCLUDING COOLANT VALVE FOR
INTERNAL GRINDING CYCLE

FREQUENCY
30 KVA, FOR DRIVING 1-4 HIGH-SPEED INTERNAL GRINDING SPINDLES

INCLUDING VARIOUS ACCESSORIES
- THREE-JAW CHUCK ROTA S PLUS 250 - 62
- 4 NOS. COLLET CHUCK DEVICE INCLUDING COLLET CHUCKS
- 1 EXTERNAL AND 3 INTERNAL GRINDING SPINDLES
- 1 STEADY REST
- COOLANT WITH PAPER FILTER
- OIL MIST EXHAUSTER
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-structural steel frame with a footprint of round approx. hl110.3 m * hb60.4 m * h10.3 m and a covered gross floor area of approx. 6.661 square meters. in its second life cycle, this structure could be used for the construction of a  logistics warehouse, production hall with overhead cranes and many others. 
 
approximate dimensions: 
built surface: approx. 6661 square meters; 
length: approx.  110.30 meters; 
width:   approx.    60.39 meters; 
height:  approx.    10.25 meters; 
 
snow load: 
because the previous roofing (cement fiberboard, mineral fibre insulation, trapezoidal steel panels) was quite heavy, the snow load by use of st-pir-st sandwich panels is likely to be higher. the exact static value must be calculated by a structural engineer. 
 
structural steel work: 
bolted steel frame structure made of hot-rolled and primed / coated euro profiles. the longitudinal stiffness of the hall is achieved by wind bracings in the roof level and vertical bracings in the side walls. the roof substructure consists from trapezoidal load bearing steel shells. 
 
roofing: 
the corrugated asbestos roof panels together with mineral fibre insulation will be disposed of locally. 
 
facade: 
the cladding of the building comprises of masonry and sandwich wall panels that shall be disposed locally. 
 
documentation: the original structural engineering calculations could not be found. 
location: border region of germany and netherlands. viewing by appointment. 
availability: the structure can be deconstructed immediately. 
export price: upon written request with full company / contact information.  STRUCTURAL STEEL FRAME WITH A FOOTPRINT OF ROUND APPROX. HL110.3 M * HB60.4 M * H10.3 M AND A COVERED GROSS FLOOR AREA OF APPROX. 6.661 SQUARE METERS. IN ITS SECOND LIFE CYCLE, THIS STRUCTURE COULD BE USED FOR THE CONSTRUCTION OF A LOGISTICS WAREHOUSE, PRODUCTION HALL WITH OVERHEAD CRANES AND MANY OTHERS. APPROXIMATE DIMENSIONS: BUILT SURFACE: APPROX. 6661 SQUARE METERS; LENGTH: APPROX. 110.30 METERS; WIDTH: APPROX. 60.39 METERS; HEIGHT: APPROX. 10.25 METERS; SNOW LOAD: BECAUSE THE PREVIOUS ROOFING (CEMENT FIBERBOARD, MINERAL FIBRE INSULATION, TRAPEZOIDAL STEEL PANELS) WAS QUITE HEAVY, THE SNOW LOAD BY USE OF ST-PIR-ST SANDWICH PANELS IS LIKELY TO BE HIGHER. THE EXACT STATIC VALUE MUST BE CALCULATED BY A STRUCTURAL ENGINEER. STRUCTURAL STEEL WORK: BOLTED STEEL FRAME STRUCTURE MADE OF HOT-ROLLED AND PRIMED / COATED EURO PROFILES. THE LONGITUDINAL STIFFNESS OF THE HALL IS ACHIEVED BY WIND BRACINGS IN THE ROOF LEVEL AND VERTICAL BRACINGS IN THE SIDE WALLS. THE ROOF SUBSTRUCTURE CONSISTS FROM TRAPEZOIDAL LOAD BEARING STEEL SHELLS. ROOFING: THE CORRUGATED ASBESTOS ROOF PANELS TOGETHER WITH MINERAL FIBRE INSULATION WILL BE DISPOSED OF LOCALLY. FACADE: THE CLADDING OF THE BUILDING COMPRISES OF MASONRY AND SANDWICH WALL PANELS THAT SHALL BE DISPOSED LOCALLY. DOCUMENTATION: THE ORIGINAL STRUCTURAL ENGINEERING CALCULATIONS COULD NOT BE FOUND. LOCATION: BORDER REGION OF GERMANY AND NETHERLANDS. VIEWING BY APPOINTMENT. AVAILABILITY: THE STRUCTURE CAN BE DECONSTRUCTED IMMEDIATELY. EXPORT PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1400 mm<br/>swing diameter: 1600 mm<br/>turning height: 1000 mm<br/>control: siemens 840 c <br/>cross rail - adjustment: 1000 mm<br/>: 1300 <br/>table rpm: 315 u/min.<br/>workpiece weight: 15000 kg<br/>feed range: 0,1 - 2.000 mm/min<br/>rapid traverse: 6000 mm/min<br/>spindle motor: 40/56 kw kw<br/>connected load: ca. 75 kva<br/>weight of the machine ca.: 40 t<br/>accessories:<br/>- 4 - nos. clamping vices<br/>- div. tool holder and cutting tools capto<br/>- chip conveyor<br/>- knoll coolant device<br/>- documentation<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1400 MM
SWING DIAMETER: 1600 MM
TURNING HEIGHT: 1000 MM
CONTROL: SIEMENS 840 C
CROSS RAIL - ADJUSTMENT: 1000 MM
: 1300
TABLE RPM: 315 U/MIN.
WORKPIECE WEIGHT: 15000 KG
FEED RANGE: 0,1 - 2.000 MM/MIN
RAPID TRAVERSE: 6000 MM/MIN
SPINDLE MOTOR: 40/56 KW KW
CONNECTED LOAD: CA. 75 KVA
WEIGHT OF THE MACHINE CA.: 40 T
ACCESSORIES:
- 4 - NOS. CLAMPING VICES
- DIV. TOOL HOLDER AND CUTTING TOOLS CAPTO
- CHIP CONVEYOR
- KNOLL COOLANT DEVICE
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-machine type cnc lathe - inclined bed machine make biglia type b 1000 cnc model year 1997 control type cnc storage france country of origin italy delivery immediately cargo base free technical details loaded

turning diameter 560 mm turning length 1045 mm control fanuc ot bar passage: 70 mm speed range - spindle 3000 rev/min feed range - revolver / infinitely 1200 mm / min rapid traverse 12/12 m / min number of turret: 1 piece turret - places: 12 stations w erkzeugaufnahme 25 x 25 tailstock mk 5 kw total power consumption 26 machine weight 6 tons of space requirement approx. 3500 x 1800 x 1800 mm accessories 3 - bake - feed yes complete machine documentation yes conveyors yes electronic handwheel kã¼hlmitteleinrichtung

additional information

cnc fanuc ot

315 slide feed
 with lot off tools MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE BIGLIA TYPE B 1000 CNC MODEL YEAR 1997 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN ITALY DELIVERY IMMEDIATELY CARGO BASE FREE TECHNICAL DETAILS LOADED TURNING DIAMETER 560 MM TURNING LENGTH 1045 MM CONTROL FANUC OT BAR PASSAGE: 70 MM SPEED RANGE - SPINDLE 3000 REV/MIN FEED RANGE - REVOLVER / INFINITELY 1200 MM / MIN RAPID TRAVERSE 12/12 M / MIN NUMBER OF TURRET: 1 PIECE TURRET - PLACES: 12 STATIONS W ERKZEUGAUFNAHME 25 X 25 TAILSTOCK MK 5 KW TOTAL POWER CONSUMPTION 26 MACHINE WEIGHT 6 TONS OF SPACE REQUIREMENT APPROX. 3500 X 1800 X 1800 MM ACCESSORIES 3 - BAKE - FEED YES COMPLETE MACHINE DOCUMENTATION YES CONVEYORS YES ELECTRONIC HANDWHEEL K&ATILDE;&FRAC14;HLMITTELEINRICHTUNG ADDITIONAL INFORMATION CNC FANUC OT 315 SLIDE FEED WITH LOT OFF TOOLS
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-grinding diameter: 250 mm<br/>grinding length: 1500 mm<br/>centre height: 125 mm<br/>grinding wheel diameter: 400 mm<br/>grinding wheel width: 50 mm<br/>bore: 127 mm<br/>: mk5 <br/>work piece spindle speed: 20-600 u/min<br/>workpiece spindle - bore:  mm<br/>grinding head swivelling: 360 °<br/>grinding spindle head - swivable: 180 + - °<br/>grinding spindle speed: 1500,1700,2200 u/min<br/>: 0,001-0,030 mm/Ø<br/>: 0-0,95 mm/Ø<br/>: ± 6 °<br/>longitudinal feed of the table: 1750 mm<br/>table speeds: 0,02-6 m/min<br/>: 130 kg<br/>: 130 inkl. spannugkg kg<br/>:  mm<br/>grinding depth:  mm<br/>: 80 mm<br/>total power requirement: 6,5 kw<br/>weight of the machine ca.: 2,9 t<br/>dimensions of the machine ca.: 5,6 x 2,0 m<br/>with 2 axis digital read out<br/>with new dgs cooling unit with paper filter<br/><br/>die werkzeugmaschine entspricht zum derzeitigen zeitpunkt nicht den grundlegenden sicherheits- und schutzanforderungen wie in der betrsichv 2015 genannt.<br/>eine anhebung des erforderlichen mindest-schutzzieles ist mittels einer gefährdungsbeurteilung nach betrsichv zu ermitteln.<br/><br/><br/><br/> GRINDING DIAMETER: 250 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 125 MM
GRINDING WHEEL DIAMETER: 400 MM
GRINDING WHEEL WIDTH: 50 MM
BORE: 127 MM
: MK5
WORK PIECE SPINDLE SPEED: 20-600 U/MIN
WORKPIECE SPINDLE - BORE: MM
GRINDING HEAD SWIVELLING: 360 °
GRINDING SPINDLE HEAD - SWIVABLE: 180 + - °
GRINDING SPINDLE SPEED: 1500,1700,2200 U/MIN
: 0,001-0,030 MM/Ø
: 0-0,95 MM/Ø
: ± 6 °
LONGITUDINAL FEED OF THE TABLE: 1750 MM
TABLE SPEEDS: 0,02-6 M/MIN
: 130 KG
: 130 INKL. SPANNUGKG KG
: MM
GRINDING DEPTH: MM
: 80 MM
TOTAL POWER REQUIREMENT: 6,5 KW
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS OF THE MACHINE CA.: 5,6 X 2,0 M
WITH 2 AXIS DIGITAL READ OUT
WITH NEW DGS COOLING UNIT WITH PAPER FILTER

DIE WERKZEUGMASCHINE ENTSPRICHT ZUM DERZEITIGEN ZEITPUNKT NICHT DEN GRUNDLEGENDEN SICHERHEITS- UND SCHUTZANFORDERUNGEN WIE IN DER BETRSICHV 2015 GENANNT.
EINE ANHEBUNG DES ERFORDERLICHEN MINDEST-SCHUTZZIELES IST MITTELS EINER GEFäHRDUNGSBEURTEILUNG NACH BETRSICHV ZU ERMITTELN.



Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-number of weighing heads: 10, weighing capacity: 15-1000g, max. volumen per dump: 4500cm³, output depending on batch: 20-60 weighings/min, weight: 445kg.  NUMBER OF WEIGHING HEADS: 10, WEIGHING CAPACITY: 15-1000G, MAX. VOLUMEN PER DUMP: 4500CM³, OUTPUT DEPENDING ON BATCH: 20-60 WEIGHINGS/MIN, WEIGHT: 445KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 9000 kg<br/>dimensions (l x w x h) approx.: 9000 x 4000 x 2500 mm<br/>description: 2 oxicutting heads. 1 plasma head. cutting capacity 6000x3500 mm. machine disassembled in warehouse WEIGHT APPROX.: 9000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X 4000 X 2500 MM
DESCRIPTION: 2 OXICUTTING HEADS. 1 PLASMA HEAD. CUTTING CAPACITY 6000X3500 MM. MACHINE DISASSEMBLED IN WAREHOUSE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 18.255 €
Ubicación: Land-for sale exclusively at 11:30 next march 2019 21 at our headquarters in bergamo
detailed list available, contact us for details and to schedule a viewing!
lifting equipment and shelving
electric trolley jughinrich
electric linkage pimespo mod. tl08 and taken 2,000 kg
toyota forklift 7fbest 15 of 2010 brought 1.5 q
om forklift 10 tons, 1990
nr. 2 2,000 pallet kg capacity

shelving and furniture
shelving
metal loft huni with scale
metal cabinets, bookcase in wood, leather and fabric chairs and armchairs
various cabinets
pcs and printers

cold rooms and pallets
positive full year 2008 cell rack, misa
negative cell year 1999
positive cell costan, year 1988
nr. 500 epal pallets
  FOR SALE EXCLUSIVELY AT 11:30 NEXT MARCH 2019 21 AT OUR HEADQUARTERS IN BERGAMO DETAILED LIST AVAILABLE, CONTACT US FOR DETAILS AND TO SCHEDULE A VIEWING! LIFTING EQUIPMENT AND SHELVING ELECTRIC TROLLEY JUGHINRICH ELECTRIC LINKAGE PIMESPO MOD. TL08 AND TAKEN 2,000 KG TOYOTA FORKLIFT 7FBEST 15 OF 2010 BROUGHT 1.5 Q OM FORKLIFT 10 TONS, 1990 NR. 2 2,000 PALLET KG CAPACITY SHELVING AND FURNITURE SHELVING METAL LOFT HUNI WITH SCALE METAL CABINETS, BOOKCASE IN WOOD, LEATHER AND FABRIC CHAIRS AND ARMCHAIRS VARIOUS CABINETS PCS AND PRINTERS COLD ROOMS AND PALLETS POSITIVE FULL YEAR 2008 CELL RACK, MISA NEGATIVE CELL YEAR 1999 POSITIVE CELL COSTAN, YEAR 1988 NR. 500 EPAL PALLETS
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-capacity: 55000  bottles/h<br />max. filling pressure: 7  bar<br />volume product-ring bowl: 550  l  <br />power consumption: 25 kw<br />weight: 19  t<br />formats:  bottle formats: 0,33 l vichy-bottles, 0,5 l nrw-bottles, bottle diameter: 50-75 mm, bottle height: 150-330 mm<br />machine pitch: filling valves: 130, division of the valves: 87 mm, closure heads: 26, division of the closure heads: 87 mm<br />direction:  right-left<br />operation / control:  siemens s7<br />basic construction: 10 calotte feet<br />equipment: filling valves with integrated hot water scouring, automatic filling height adjustment, foaming by means of automatically positioning hde, bottle control, air co2 sterilizer,<br />accessories: closing container with mini / maxi contact, mechanical quick clamping for format parts<br /> CAPACITY: 55000 BOTTLES/H
MAX. FILLING PRESSURE: 7 BAR
VOLUME PRODUCT-RING BOWL: 550 L
POWER CONSUMPTION: 25 KW
WEIGHT: 19 T
FORMATS: BOTTLE FORMATS: 0,33 L VICHY-BOTTLES, 0,5 L NRW-BOTTLES, BOTTLE DIAMETER: 50-75 MM, BOTTLE HEIGHT: 150-330 MM
MACHINE PITCH: FILLING VALVES: 130, DIVISION OF THE VALVES: 87 MM, CLOSURE HEADS: 26, DIVISION OF THE CLOSURE HEADS: 87 MM
DIRECTION: RIGHT-LEFT
OPERATION / CONTROL: SIEMENS S7
BASIC CONSTRUCTION: 10 CALOTTE FEET
EQUIPMENT: FILLING VALVES WITH INTEGRATED HOT WATER SCOURING, AUTOMATIC FILLING HEIGHT ADJUSTMENT, FOAMING BY MEANS OF AUTOMATICALLY POSITIONING HDE, BOTTLE CONTROL, AIR CO2 STERILIZER,
ACCESSORIES: CLOSING CONTAINER WITH MINI / MAXI CONTACT, MECHANICAL QUICK CLAMPING FOR FORMAT PARTS
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-table 1600 x 400 mm
tool holder iso 50
maximum travel distance x  1120 mm
max travel y  345 mm
max z vertical stroke 400 mm
maximum table load of 1500 kg
speed range 28-1400 rpm.
main drive 11 kw
connected power 14.5 kw
voltage 3 x 400 v / 50 hz
weight 3.85 t

new electrical cabinet flexiva in 2005
plc siemens s 7-300
horizontal milling spindle
vertical milling head aps ii f400
horizontal opposite support
coolant system  TABLE 1600 X 400 MM TOOL HOLDER ISO 50 MAXIMUM TRAVEL DISTANCE X 1120 MM MAX TRAVEL Y 345 MM MAX Z VERTICAL STROKE 400 MM MAXIMUM TABLE LOAD OF 1500 KG SPEED RANGE 28-1400 RPM. MAIN DRIVE 11 KW CONNECTED POWER 14.5 KW VOLTAGE 3 X 400 V / 50 HZ WEIGHT 3.85 T NEW ELECTRICAL CABINET FLEXIVA IN 2005 PLC SIEMENS S 7-300 HORIZONTAL MILLING SPINDLE VERTICAL MILLING HEAD APS II F400 HORIZONTAL OPPOSITE SUPPORT COOLANT SYSTEM
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-used cnc bed milling machine lagun gbm 21
control heidenhain itnc 530

technical data:
travel in x - y - z axis mm 2000/1000/1200;
table size mm 2100 x 800;
max. spindle speed min-1 3,000;
max. torque nm 1,300;
tool holder sk 50/din 69851;
h/v head manually;

accessories:
h/v head manually swiveling;
heidenhain glass scales in 3 axes;
electronic handwheel;
coolant system;

 USED CNC BED MILLING MACHINE LAGUN GBM 21 CONTROL HEIDENHAIN ITNC 530 TECHNICAL DATA: TRAVEL IN X - Y - Z AXIS MM 2000/1000/1200; TABLE SIZE MM 2100 X 800; MAX. SPINDLE SPEED MIN-1 3,000; MAX. TORQUE NM 1,300; TOOL HOLDER SK 50/DIN 69851; H/V HEAD MANUALLY; ACCESSORIES: H/V HEAD MANUALLY SWIVELING; HEIDENHAIN GLASS SCALES IN 3 AXES; ELECTRONIC HANDWHEEL; COOLANT SYSTEM;
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land- 5 rows, \r\ncap. approx. 12.000-15.000 pcs../h\r\ninclude\r\nheadmachine  type industrie t 5 s-1/2-85/9,\r\ndoughweightrange 35 - 95 g\r\n2 moulding drums a) 75 - 85 g /// b) 85 - 95 g\r\nintermediate proofer, moulder 5 ROWS, \R\NCAP. APPROX. 12.000-15.000 PCS../H\R\NINCLUDE\R\NHEADMACHINE TYPE INDUSTRIE T 5 S-1/2-85/9,\R\NDOUGHWEIGHTRANGE 35 - 95 G\R\N2 MOULDING DRUMS A) 75 - 85 G /// B) 85 - 95 G\R\NINTERMEDIATE PROOFER, MOULDER
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-mazak cnc used lathe quick turn nexus qtn 200 m
control mazatrol 640t nexus

technical data:
maximum turning diameter mm 380;
maximum working length mm 538;
max bar passage mm 65;
maximum spindle speed min-1 5,000;
c-axis on spindle level 0.001.
3-jaw chuck kitagawa bb 208;

turret with driven tools 12 stations;
maximum speed driven tools 4,500 min-1;

accessories:
tool eye
1 set of tool holders
   MAZAK CNC USED LATHE QUICK TURN NEXUS QTN 200 M CONTROL MAZATROL 640T NEXUS TECHNICAL DATA: MAXIMUM TURNING DIAMETER MM 380; MAXIMUM WORKING LENGTH MM 538; MAX BAR PASSAGE MM 65; MAXIMUM SPINDLE SPEED MIN-1 5,000; C-AXIS ON SPINDLE LEVEL 0.001. 3-JAW CHUCK KITAGAWA BB 208; TURRET WITH DRIVEN TOOLS 12 STATIONS; MAXIMUM SPEED DRIVEN TOOLS 4,500 MIN-1; ACCESSORIES: TOOL EYE 1 SET OF TOOL HOLDERS
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-type automat, 30 pcs.,  32  -  70 g\r\nhead turning backwards by a motor\r\ninclude 3 new rounding plates TYPE AUTOMAT, 30 PCS., 32 - 70 G\R\NHEAD TURNING BACKWARDS BY A MOTOR\R\NINCLUDE 3 NEW ROUNDING PLATES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used mazak cnc lathe quick turn qt 10
control mazatrol t-plus

technical data:
max. turning diameter 300 mm
max. machining length 256 mm
max. bar passage 40 mm
max. spindle speed 6,000 min-1
3-jaw chuck, kitagawa b-206 mm 160
turret with 12 stations
tailstock
tailstock travel 340 mm

accessories:
part catcher
interface for bar feeder
tool eye
chip conveyor    USED MAZAK CNC LATHE QUICK TURN QT 10 CONTROL MAZATROL T-PLUS TECHNICAL DATA: MAX. TURNING DIAMETER 300 MM MAX. MACHINING LENGTH 256 MM MAX. BAR PASSAGE 40 MM MAX. SPINDLE SPEED 6,000 MIN-1 3-JAW CHUCK, KITAGAWA B-206 MM 160 TURRET WITH 12 STATIONS TAILSTOCK TAILSTOCK TRAVEL 340 MM ACCESSORIES: PART CATCHER INTERFACE FOR BAR FEEDER TOOL EYE CHIP CONVEYOR
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-lefthand - operation include \r\nhead machine  / divider\r\nmoistener + strewer, include\r\ndepositing device \r\n  working width 600 mm\r\n  max. setting length  2000 mm\r\n  variable speed\r\n LEFTHAND - OPERATION INCLUDE \R\NHEAD MACHINE / DIVIDER\R\NMOISTENER + STREWER, INCLUDE\R\NDEPOSITING DEVICE \R\N WORKING WIDTH 600 MM\R\N MAX. SETTING LENGTH 2000 MM\R\N VARIABLE SPEED\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-axa vertical - horizontal 2-1760-m-5 bj. 2003 / 5 axes / xyz baz mod vhc: 1760-600 - 800 / table 1500 x 600 / rotary table integrated 44 seats (2 x 22) / cnc heidenhain 600 / magazine ã? mod tnc 530 / speed 100-15,000 u min / 40 m-min. 3 d probes and new spindle messline al in x axis (22,000 euros) / swivel head is a simultaneous head continuously variable / good condition fe.gi.maschinen.sbg.at

axa vertical - horizontal machining center mod vhc 2-1760-m-5 / year 2003 / 5 axes / xyz: 1760-600 - 800 / table 1500 x 600 / integrated turn-table ã? 600 / magazine 44 tools (2 x 22) / cnc heidenhain mod. tnc 530 / speed 100-15,000 rpm. / 40 m-min. / 3 d test / new spindle and measuring ruler in x axis (â?¬ 22,000) / swivel head is a simultaneous head stepless / good condition
fe.gi.maschinen.sbg.at AXA VERTICAL - HORIZONTAL 2-1760-M-5 BJ. 2003 / 5 AXES / XYZ BAZ MOD VHC: 1760-600 - 800 / TABLE 1500 X 600 / ROTARY TABLE INTEGRATED 44 SEATS (2 X 22) / CNC HEIDENHAIN 600 / MAGAZINE &ATILDE;? MOD TNC 530 / SPEED 100-15,000 U MIN / 40 M-MIN. 3 D PROBES AND NEW SPINDLE MESSLINE AL IN X AXIS (22,000 EUROS) / SWIVEL HEAD IS A SIMULTANEOUS HEAD CONTINUOUSLY VARIABLE / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT AXA VERTICAL - HORIZONTAL MACHINING CENTER MOD VHC 2-1760-M-5 / YEAR 2003 / 5 AXES / XYZ: 1760-600 - 800 / TABLE 1500 X 600 / INTEGRATED TURN-TABLE &ATILDE;? 600 / MAGAZINE 44 TOOLS (2 X 22) / CNC HEIDENHAIN MOD. TNC 530 / SPEED 100-15,000 RPM. / 40 M-MIN. / 3 D TEST / NEW SPINDLE AND MEASURING RULER IN X AXIS (&ACIRC;?&NOT; 22,000) / SWIVEL HEAD IS A SIMULTANEOUS HEAD STEPLESS / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-type automat, 30 pcs.,  32  -  70 g\r\nmanually head turning backwards\r\n TYPE AUTOMAT, 30 PCS., 32 - 70 G\R\NMANUALLY HEAD TURNING BACKWARDS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-type displayed
table size 1200 x 300 mm.
transversal stroke 300 mm.
axis x 850 mm.
vertical stroke 500 mm.
type gear head
iso 50 cone
28-1600 rpm spindle speed.
spindle motor power 5 hp.
2120 kg weight.
year built 1974 TYPE DISPLAYED TABLE SIZE 1200 X 300 MM. TRANSVERSAL STROKE 300 MM. AXIS X 850 MM. VERTICAL STROKE 500 MM. TYPE GEAR HEAD ISO 50 CONE 28-1600 RPM SPINDLE SPEED. SPINDLE MOTOR POWER 5 HP. 2120 KG WEIGHT. YEAR BUILT 1974
Vendedor: B.M. MACCHINE UTENSILI srl
Año de construcción: usado
Ubicación: Land-manufacturer: bauerrichter, type: ksk kantenschleifmaschine, monting of the machine: längsband , sanding belt hight: ca.50, table length: 2000, slewable sanding head: yes, table stop mm: yes, sanding area (beam): yes, sanding belt length max mm: ca. 2100 x 60, work piece hight min-max mm: 10-40, feeding speed min-max m/min: 3-6-9-12, 1 schleifmotor kw: 0,75, sanding unit slewable up to 45°: yes, controllable slewable: yes, 2 belt speeds: regelbar, control panel at bottom: yes, MANUFACTURER: BAUERRICHTER, TYPE: KSK KANTENSCHLEIFMASCHINE, MONTING OF THE MACHINE: LäNGSBAND , SANDING BELT HIGHT: CA.50, TABLE LENGTH: 2000, SLEWABLE SANDING HEAD: YES, TABLE STOP MM: YES, SANDING AREA (BEAM): YES, SANDING BELT LENGTH MAX MM: CA. 2100 X 60, WORK PIECE HIGHT MIN-MAX MM: 10-40, FEEDING SPEED MIN-MAX M/MIN: 3-6-9-12, 1 SCHLEIFMOTOR KW: 0,75, SANDING UNIT SLEWABLE UP TO 45&DEG;: YES, CONTROLLABLE SLEWABLE: YES, 2 BELT SPEEDS: REGELBAR, CONTROL PANEL AT BOTTOM: YES,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-year of manufacture 2004
control siemens 840 d
traverse paths x 400 mm z 400 mm
hours of operation 17.427 h

main spindle:
spindle speed 8,000 rpm
spindle head 100 mm bee3obzuh9
spindle bore 32 mm

counter spindle:
spindle speed 8,000 rpm
spindle head 100 mm spindle bore 32 mm

switching revolver:
number stations 16 x
powered 8
tool holder vdi16

dimensions and weight:
2,645 mm x 1,730 mm x 1.715 mm
weight approx. 2500 kg YEAR OF MANUFACTURE 2004 CONTROL SIEMENS 840 D TRAVERSE PATHS X 400 MM Z 400 MM HOURS OF OPERATION 17.427 H MAIN SPINDLE: SPINDLE SPEED 8,000 RPM SPINDLE HEAD 100 MM BEE3OBZUH9 SPINDLE BORE 32 MM COUNTER SPINDLE: SPINDLE SPEED 8,000 RPM SPINDLE HEAD 100 MM SPINDLE BORE 32 MM SWITCHING REVOLVER: NUMBER STATIONS 16 X POWERED 8 TOOL HOLDER VDI16 DIMENSIONS AND WEIGHT: 2,645 MM X 1,730 MM X 1.715 MM WEIGHT APPROX. 2500 KG
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land-aluminium caps ranging from<br/>diameters of 18 [mm] to 38 [mm] <br/>id5483 ALUMINIUM CAPS RANGING FROM
DIAMETERS OF 18 [MM] TO 38 [MM]
ID5483
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-bobst sp 102-bma, 1982
ref.nr: 2635 manufacturer bobst model sp 102-bma year built: 1982 speed: 7500 sh/h max sheet size: 1020 x 720 mm availability: immediately condition: good price: on technical request spezification: â?¢ platen force generated - ton: 250
â?¢ substrate types (paper / board / corrugate): board
â?¢ substrate handling devices and type:: none
â?¢ centre line system: yes
â?¢ micrometric adjustment: manual
â?¢ thin cutting plate: none
â?¢ stripping station:: none
â?¢ blanking station:: none
â?¢ non-stop feeder / delivery:: yes
â?¢ pile height (with / without non-stop)-feeder: 1810mm
â?¢ pile height (with / without non-stop)-delivery: 1610mm
â?¢ auto feeder head height adjustment: manual
â?¢ car side-pile adjustment: manual
â?¢ sheet slow-down device: yes
â?¢ bernoulli devices: yes
â?¢ auto pallet feeding system: yes
â?¢ conveyor loading devices: yes
â?¢ anti-static system: yes
â?¢ oil heater with timer: yes
â?¢ thin plate cutting system: none
â?¢ quick-lock: yes
â?¢ honeycomb plates: 13
â?¢ number of foil spindle sets in machine: 3
â?¢ foil streams (max number): 3
â?¢ foil reel size (diameter min / max): 25/250
â?¢ foil reel width (width min / max): 25 / 1010mm
â?¢ foil waste removal system & type: brushes
â?¢ control console: none
â?¢ cube system and other pre-setting system: cube
â?¢ plinth height & platform design: plinth height 400mm
â?¢ waste-trim removal device:: none
â?¢ any special features of the equipment:: have guarding and light beam system so holographic positioning for stamping foil feeding system strengthen
â?¢ pre-make-ready devices: none
â?¢ modem link: none
â?¢ software packages / networks / data storage: drawings and instructions
â?¢ spare chaises / stripping & blanking frames: none
â?¢ cutting plates and no:: 7
â?¢ universal frame system and no:: 5
â?¢ foil spindle devices and no.:: 2
â?¢ spares in general and no:: none
â?¢ shelving / benches: none
â?¢ pumps / fans / compressors: 2 pumps
â?¢ chaise changer: none
â?¢ pivoting presetting table: 1
â?¢ pile preparation device: none
â?¢ lifting devices: 0.5 ton hoist arm
â?¢ tools: 3 honeycomb chases / 5 die-cut plates/5 steel plate
â?¢ estimated overall weight (ton): 16
â?¢ overall length (m): 5.75, overall width (m): 4.52, overall height (m): 2.15
â?¢ total power consumption (voltage/phase/amp): 380v 45a(stamping system) / 380v 40a(main motor)
 BOBST SP 102-BMA, 1982 REF.NR: 2635 MANUFACTURER BOBST MODEL SP 102-BMA YEAR BUILT: 1982 SPEED: 7500 SH/H MAX SHEET SIZE: 1020 X 720 MM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; PLATEN FORCE GENERATED - TON: 250 &ACIRC;?&CENT; SUBSTRATE TYPES (PAPER / BOARD / CORRUGATE): BOARD &ACIRC;?&CENT; SUBSTRATE HANDLING DEVICES AND TYPE:: NONE &ACIRC;?&CENT; CENTRE LINE SYSTEM: YES &ACIRC;?&CENT; MICROMETRIC ADJUSTMENT: MANUAL &ACIRC;?&CENT; THIN CUTTING PLATE: NONE &ACIRC;?&CENT; STRIPPING STATION:: NONE &ACIRC;?&CENT; BLANKING STATION:: NONE &ACIRC;?&CENT; NON-STOP FEEDER / DELIVERY:: YES &ACIRC;?&CENT; PILE HEIGHT (WITH / WITHOUT NON-STOP)-FEEDER: 1810MM &ACIRC;?&CENT; PILE HEIGHT (WITH / WITHOUT NON-STOP)-DELIVERY: 1610MM &ACIRC;?&CENT; AUTO FEEDER HEAD HEIGHT ADJUSTMENT: MANUAL &ACIRC;?&CENT; CAR SIDE-PILE ADJUSTMENT: MANUAL &ACIRC;?&CENT; SHEET SLOW-DOWN DEVICE: YES &ACIRC;?&CENT; BERNOULLI DEVICES: YES &ACIRC;?&CENT; AUTO PALLET FEEDING SYSTEM: YES &ACIRC;?&CENT; CONVEYOR LOADING DEVICES: YES &ACIRC;?&CENT; ANTI-STATIC SYSTEM: YES &ACIRC;?&CENT; OIL HEATER WITH TIMER: YES &ACIRC;?&CENT; THIN PLATE CUTTING SYSTEM: NONE &ACIRC;?&CENT; QUICK-LOCK: YES &ACIRC;?&CENT; HONEYCOMB PLATES: 13 &ACIRC;?&CENT; NUMBER OF FOIL SPINDLE SETS IN MACHINE: 3 &ACIRC;?&CENT; FOIL STREAMS (MAX NUMBER): 3 &ACIRC;?&CENT; FOIL REEL SIZE (DIAMETER MIN / MAX): 25/250 &ACIRC;?&CENT; FOIL REEL WIDTH (WIDTH MIN / MAX): 25 / 1010MM &ACIRC;?&CENT; FOIL WASTE REMOVAL SYSTEM & TYPE: BRUSHES &ACIRC;?&CENT; CONTROL CONSOLE: NONE &ACIRC;?&CENT; CUBE SYSTEM AND OTHER PRE-SETTING SYSTEM: CUBE &ACIRC;?&CENT; PLINTH HEIGHT & PLATFORM DESIGN: PLINTH HEIGHT 400MM &ACIRC;?&CENT; WASTE-TRIM REMOVAL DEVICE:: NONE &ACIRC;?&CENT; ANY SPECIAL FEATURES OF THE EQUIPMENT:: HAVE GUARDING AND LIGHT BEAM SYSTEM SO HOLOGRAPHIC POSITIONING FOR STAMPING FOIL FEEDING SYSTEM STRENGTHEN &ACIRC;?&CENT; PRE-MAKE-READY DEVICES: NONE &ACIRC;?&CENT; MODEM LINK: NONE &ACIRC;?&CENT; SOFTWARE PACKAGES / NETWORKS / DATA STORAGE: DRAWINGS AND INSTRUCTIONS &ACIRC;?&CENT; SPARE CHAISES / STRIPPING & BLANKING FRAMES: NONE &ACIRC;?&CENT; CUTTING PLATES AND NO:: 7 &ACIRC;?&CENT; UNIVERSAL FRAME SYSTEM AND NO:: 5 &ACIRC;?&CENT; FOIL SPINDLE DEVICES AND NO.:: 2 &ACIRC;?&CENT; SPARES IN GENERAL AND NO:: NONE &ACIRC;?&CENT; SHELVING / BENCHES: NONE &ACIRC;?&CENT; PUMPS / FANS / COMPRESSORS: 2 PUMPS &ACIRC;?&CENT; CHAISE CHANGER: NONE &ACIRC;?&CENT; PIVOTING PRESETTING TABLE: 1 &ACIRC;?&CENT; PILE PREPARATION DEVICE: NONE &ACIRC;?&CENT; LIFTING DEVICES: 0.5 TON HOIST ARM &ACIRC;?&CENT; TOOLS: 3 HONEYCOMB CHASES / 5 DIE-CUT PLATES/5 STEEL PLATE &ACIRC;?&CENT; ESTIMATED OVERALL WEIGHT (TON): 16 &ACIRC;?&CENT; OVERALL LENGTH (M): 5.75, OVERALL WIDTH (M): 4.52, OVERALL HEIGHT (M): 2.15 &ACIRC;?&CENT; TOTAL POWER CONSUMPTION (VOLTAGE/PHASE/AMP): 380V 45A(STAMPING SYSTEM) / 380V 40A(MAIN MOTOR)
Vendedor: PP LION GMBH
Año de construcción: usado
Ubicación: Land-working range -boring-:  <br/>- throat (max):   2500 mm<br/>- spindle revolutions (max):   1800 /min<br/>milling spindle / head:  <br/>- tool fixture: mk 4:        <br/>table:  <br/>- table surface (left-right):   1000 mm<br/>- table surface (front-back):   2000 mm<br/>electrical specifications:  <br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/><br/><br/><br/><br/> WORKING RANGE -BORING-:
- THROAT (MAX): 2500 MM
- SPINDLE REVOLUTIONS (MAX): 1800 /MIN
MILLING SPINDLE / HEAD:
- TOOL FIXTURE: MK 4:
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1000 MM
- TABLE SURFACE (FRONT-BACK): 2000 MM
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-axa vertical - horizontal baz mod. vhc 3-3000 m / 98 / xyz: 3000 (1550 left - 950 right) - 800 (until 870) - 800 (up to 1000) sk 40 cnc heidenhain tnc 430 / magazine 36 tools / round table ã? 1000 / hydraulic unit / swivel head + 90â° division 2.5 deg / speed 100-10,000 u -min. / good condition
fe.gi.maschinen.sbg.at

axa vertical - horizontal machining center model vhc 3-3000 m / year 98 / xyz: 3000 (1550 left - right 950) - 800 (up to 870) - 800 (up to 1000) / sk 40 cnc heidenhain tnc 430 / magazine 36 tools / rotary table ã? 1000 / hydraulic unit / swivel head-+ 90 â° pitch 2.5 degrees / speeds 100-10,000 rpm / good condition
fe.gi.maschinen.sbg.at AXA VERTICAL - HORIZONTAL BAZ MOD. VHC 3-3000 M / 98 / XYZ: 3000 (1550 LEFT - 950 RIGHT) - 800 (UNTIL 870) - 800 (UP TO 1000) SK 40 CNC HEIDENHAIN TNC 430 / MAGAZINE 36 TOOLS / ROUND TABLE &ATILDE;? 1000 / HYDRAULIC UNIT / SWIVEL HEAD + 90&ACIRC;&DEG; DIVISION 2.5 DEG / SPEED 100-10,000 U -MIN. / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT AXA VERTICAL - HORIZONTAL MACHINING CENTER MODEL VHC 3-3000 M / YEAR 98 / XYZ: 3000 (1550 LEFT - RIGHT 950) - 800 (UP TO 870) - 800 (UP TO 1000) / SK 40 CNC HEIDENHAIN TNC 430 / MAGAZINE 36 TOOLS / ROTARY TABLE &ATILDE;? 1000 / HYDRAULIC UNIT / SWIVEL HEAD-+ 90 &ACIRC;&DEG; PITCH 2.5 DEGREES / SPEEDS 100-10,000 RPM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-x-travel: 1800 mm<br/>y-travel: 2000 mm<br/>z-travel: 1100 mm<br/>control: tnc430 <br/>table surface area: 1700 x 1400 mm<br/>table load: 5,00 t<br/>number of t-slots: 11 <br/>groove width: 18h12 mm<br/>flute distance: 125 mm<br/>center hole: 50h6 mm<br/>b-axis (table): 360,000 x 0,001 °<br/>table rotation speed: max. 10,00 u/min<br/>main spindle speeds:: 1 - 10.000 u/min<br/>power capacity at 100 % load: 20,00 kw<br/>power capacity at 40 % load: 30,00 kw<br/>tool taper: sk 50 / din69871 <br/>milling head -swivable: 0 - 90 x 0,001 °<br/>feed x/y/z-axis: 20 - 10.000 mm/min<br/>rapid traverse x-axis: 60,00 m/min<br/>rapid traverse y-axis: 40,00 m/min<br/>rapid traverse z-axis: 40,00 m/min<br/>toolpiece magazine: chain magazine: 88x sk50 stück<br/>toolpiece magazine: chain magazine: 16x hsk-32 stück<br/>tool length - max.: 450 mm<br/>diameter of tools max.: 110 mm<br/>tool diameter with 2 vacant positions: 230 mm<br/>weight of tools max.: 20,00 kg<br/>additional spindle - pick-up:  <br/>spindle turning speed - stepless: 0 - 42000 u/min<br/>tool taper: hsk-e 32 <br/>power capacity at 100 % load: 8,00 kw<br/>power capacity at 40 % load: 10,00 kw<br/>total power requirement: 65,00 kw<br/>weight of the machine ca.: 39,00 t<br/>dimensions of the machine ca.: 8,50 x 9,50 x h4,20 m<br/>5-axis machining center with control heidenhain tnc430, <br/>electronical handwheel, blum laser for tool measurement, chip conveyor, <br/>coolant unit, coolant through spindle (20 bar - 18 l / min), flushing gun,<br/>operating mode 4, rotoclear, sliding doors, probe heidenhain ts631<br/>interchangeable high frequency motor spindle - pick-up,<br/>tool changer hsk-e 32 with 16 places in the magazine,<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> X-TRAVEL: 1800 MM
Y-TRAVEL: 2000 MM
Z-TRAVEL: 1100 MM
CONTROL: TNC430
TABLE SURFACE AREA: 1700 X 1400 MM
TABLE LOAD: 5,00 T
NUMBER OF T-SLOTS: 11
GROOVE WIDTH: 18H12 MM
FLUTE DISTANCE: 125 MM
CENTER HOLE: 50H6 MM
B-AXIS (TABLE): 360,000 X 0,001 °
TABLE ROTATION SPEED: MAX. 10,00 U/MIN
MAIN SPINDLE SPEEDS:: 1 - 10.000 U/MIN
POWER CAPACITY AT 100 % LOAD: 20,00 KW
POWER CAPACITY AT 40 % LOAD: 30,00 KW
TOOL TAPER: SK 50 / DIN69871
MILLING HEAD -SWIVABLE: 0 - 90 X 0,001 °
FEED X/Y/Z-AXIS: 20 - 10.000 MM/MIN
RAPID TRAVERSE X-AXIS: 60,00 M/MIN
RAPID TRAVERSE Y-AXIS: 40,00 M/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
TOOLPIECE MAGAZINE: CHAIN MAGAZINE: 88X SK50 STüCK
TOOLPIECE MAGAZINE: CHAIN MAGAZINE: 16X HSK-32 STüCK
TOOL LENGTH - MAX.: 450 MM
DIAMETER OF TOOLS MAX.: 110 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 230 MM
WEIGHT OF TOOLS MAX.: 20,00 KG
ADDITIONAL SPINDLE - PICK-UP:
SPINDLE TURNING SPEED - STEPLESS: 0 - 42000 U/MIN
TOOL TAPER: HSK-E 32
POWER CAPACITY AT 100 % LOAD: 8,00 KW
POWER CAPACITY AT 40 % LOAD: 10,00 KW
TOTAL POWER REQUIREMENT: 65,00 KW
WEIGHT OF THE MACHINE CA.: 39,00 T
DIMENSIONS OF THE MACHINE CA.: 8,50 X 9,50 X H4,20 M
5-AXIS MACHINING CENTER WITH CONTROL HEIDENHAIN TNC430,
ELECTRONICAL HANDWHEEL, BLUM LASER FOR TOOL MEASUREMENT, CHIP CONVEYOR,
COOLANT UNIT, COOLANT THROUGH SPINDLE (20 BAR - 18 L / MIN), FLUSHING GUN,
OPERATING MODE 4, ROTOCLEAR, SLIDING DOORS, PROBE HEIDENHAIN TS631
INTERCHANGEABLE HIGH FREQUENCY MOTOR SPINDLE - PICK-UP,
TOOL CHANGER HSK-E 32 WITH 16 PLACES IN THE MAGAZINE,
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-4 ccts, 717 hl gross / 560 hl net content, maximum 0.9 bar, unused, coolable with 3 glycol cooling zones in the wall and 1 in the cone, isolated 150 mm trapezoidal sheet metal clad, domed lid with armatures, spray head, pt-100, sampler, installation to stand frame, h: 11,730 mm, outer diameter: 3,850 mm, inner diameter: 3,500 mm. 

4 ccts, 348 hl gross content, maximum 0.9 bar, unused, coolable over 3 glycol cooling zones in the wall and 1 in the cone, isolated 150 mm trapezoidal sheet metal clad, standing at 4 feet, with armatures, spray head, sampler, h: 7,350 mm, inner diameter: 3,200 mm, outer diameter: 3,560 mm 4 CCTS, 717 HL GROSS / 560 HL NET CONTENT, MAXIMUM 0.9 BAR, UNUSED, COOLABLE WITH 3 GLYCOL COOLING ZONES IN THE WALL AND 1 IN THE CONE, ISOLATED 150 MM TRAPEZOIDAL SHEET METAL CLAD, DOMED LID WITH ARMATURES, SPRAY HEAD, PT-100, SAMPLER, INSTALLATION TO STAND FRAME, H: 11,730 MM, OUTER DIAMETER: 3,850 MM, INNER DIAMETER: 3,500 MM. 4 CCTS, 348 HL GROSS CONTENT, MAXIMUM 0.9 BAR, UNUSED, COOLABLE OVER 3 GLYCOL COOLING ZONES IN THE WALL AND 1 IN THE CONE, ISOLATED 150 MM TRAPEZOIDAL SHEET METAL CLAD, STANDING AT 4 FEET, WITH ARMATURES, SPRAY HEAD, SAMPLER, H: 7,350 MM, INNER DIAMETER: 3,200 MM, OUTER DIAMETER: 3,560 MM
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 300 mm<br/>y-travel: 160 mm<br/>z-travel: 340 mm<br/>table surface area: 600 x 210 mm<br/>table tiltable and swivelling +/-: 0 grad<br/>milling head -swivable +/-: 45 °<br/>tool taper: mk3 <br/>turning speed range: 60 - 1200 u/min<br/>feeds - longitudinal: 5 - 500 mm/min<br/>feeds vertical: 5 - 500 mm/min<br/>electrics - voltage/frequency: 380/50 v/hz<br/>total power requirement: 1,90 kw<br/>weight of the machine ca.: 0,70 t<br/><br/><br/><br/><br/> X-TRAVEL: 300 MM
Y-TRAVEL: 160 MM
Z-TRAVEL: 340 MM
TABLE SURFACE AREA: 600 X 210 MM
TABLE TILTABLE AND SWIVELLING +/-: 0 GRAD
MILLING HEAD -SWIVABLE +/-: 45 °
TOOL TAPER: MK3
TURNING SPEED RANGE: 60 - 1200 U/MIN
FEEDS - LONGITUDINAL: 5 - 500 MM/MIN
FEEDS VERTICAL: 5 - 500 MM/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 380/50 V/HZ
TOTAL POWER REQUIREMENT: 1,90 KW
WEIGHT OF THE MACHINE CA.: 0,70 T




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1. uniblok automatic model mlk-p 12/12/1 built from:
2. rai model rinsing machine with 12 nozzles
3. a filling system with 12 nozzles
4. a single head screwing plastic nuts
the pouring machine is equipped with:
1. system of sterilization of caps with uv rays
2. additional snail for the second bottle format
3. an i / o star and a central conveyor for an additional bottle format
4. mechanical nut feeder for the turning head
the pouring machine is adapted to 3 bottle formats and one nut type, fi 38 mm. the bottle on the inlet / outlet of the machine and during pouring is transported on the conveyor belt in a standing position.
- labeling machine for perimeter labels (fast line 35bb)
- sleeve labeling machine with a steam tunnel for shrinking labels (fast line 35n)
- videojet date patches
- automatic packaging line into filmat's lpa21 packages
- loading table with conveyors for the filling machine
- pouring machine with conveyors for a labeling device

the capacity of the line of 3,000 bottles per hour 1. UNIBLOK AUTOMATIC MODEL MLK-P 12/12/1 BUILT FROM: 2. RAI MODEL RINSING MACHINE WITH 12 NOZZLES 3. A FILLING SYSTEM WITH 12 NOZZLES 4. A SINGLE HEAD SCREWING PLASTIC NUTS THE POURING MACHINE IS EQUIPPED WITH: 1. SYSTEM OF STERILIZATION OF CAPS WITH UV RAYS 2. ADDITIONAL SNAIL FOR THE SECOND BOTTLE FORMAT 3. AN I / O STAR AND A CENTRAL CONVEYOR FOR AN ADDITIONAL BOTTLE FORMAT 4. MECHANICAL NUT FEEDER FOR THE TURNING HEAD THE POURING MACHINE IS ADAPTED TO 3 BOTTLE FORMATS AND ONE NUT TYPE, FI 38 MM. THE BOTTLE ON THE INLET / OUTLET OF THE MACHINE AND DURING POURING IS TRANSPORTED ON THE CONVEYOR BELT IN A STANDING POSITION. - LABELING MACHINE FOR PERIMETER LABELS (FAST LINE 35BB) - SLEEVE LABELING MACHINE WITH A STEAM TUNNEL FOR SHRINKING LABELS (FAST LINE 35N) - VIDEOJET DATE PATCHES - AUTOMATIC PACKAGING LINE INTO FILMAT'S LPA21 PACKAGES - LOADING TABLE WITH CONVEYORS FOR THE FILLING MACHINE - POURING MACHINE WITH CONVEYORS FOR A LABELING DEVICE THE CAPACITY OF THE LINE OF 3,000 BOTTLES PER HOUR
Vendedor: Biovesta
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 630 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 740 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 5 + 1 <br/>no. of tools in turret 2: 5 + 1 <br/>tool taper: hsk-c63/f80 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c-axis, driven tools, <br/>probe, loading device, chip conveyor, tailstock.<br/>workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 630 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 740 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 5 + 1
NO. OF TOOLS IN TURRET 2: 5 + 1
TOOL TAPER: HSK-C63/F80
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS, DRIVEN TOOLS,
PROBE, LOADING DEVICE, CHIP CONVEYOR, TAILSTOCK.
WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-3 months la postpress warranty
excluding electronics

offer consists of:-gathering tower vac 100a
-stapling and folding spf-20a
-front cutter fc-20a
-short delivery sc-20

horizon vac-100a
suction air gathering machines

-technology: touch & work
-model: suction and blowing air gathering tower
-number of stations: 10 per gathering tower
-error prevention: false, double leaf and jams
-order storage: 9 memory locations for repeat orders
-expandability: up to 6 towers (60 stations)

programs:
-double cycle (nonstopbetrieb) - inject (1 x and 2 x) - brochure program
-block program
-selective gathering

-format: max 500x350mm; min. 148x120mm
-paper weight: 40-250 g / mâ²
-load capacity: 55 mm / station

-capacity: up to 9,500 records/h

-power: 230v/50 hz - 1, 86kw
-dimensions: 842 x 652 x 1, 961mm
-weight: 310kg

horizon spf-20a stapling and folding unit:

-format setting: fully automatic - din formats and standard types of folds: preset
-order memory: 12 memory slots for special formats + all din formats
-stitching heads: 2 - 4 stapling heads can be extended
-book opportunities: backstitch, block - corner stapling - ring eyelets stitching: possible with ring eyelets stitching heads

-entry format: max 500x350mm; 
min. container 180x120mm

-processing thickness: min. 2 sheets; max 22 sheets (80 g / m2)

-bracket distance: min. 73 mm
-wire diameter: 26-28
-speed: max 3,600 cycles/h

-power: 230v/50 hz - 0, 45kw
-dimensions: 2.710 x 810 x 1, 070mm
-weight: 490 kg horizon fc-20a front cutter:

-counter
-wrong paper eject

-format size: max 250x20mm; min. 85mm
-crop of format: max 20 mm
-processing thickness: min. 4 pages / max. 88 pages (80 g / m2)

-speed: maximum 3,400 brochures/h

-power: 230v/50 hz - 0, 2kw
-dimensions: 601 x 810 x 1, 070mm
-weight: 240 kg

on request, we can organize for you the following points:

packing, loading, transport (by ship or airplane) including customs clearance 3 MONTHS LA POSTPRESS WARRANTY EXCLUDING ELECTRONICS OFFER CONSISTS OF:-GATHERING TOWER VAC 100A -STAPLING AND FOLDING SPF-20A -FRONT CUTTER FC-20A -SHORT DELIVERY SC-20 HORIZON VAC-100A SUCTION AIR GATHERING MACHINES -TECHNOLOGY: TOUCH & WORK -MODEL: SUCTION AND BLOWING AIR GATHERING TOWER -NUMBER OF STATIONS: 10 PER GATHERING TOWER -ERROR PREVENTION: FALSE, DOUBLE LEAF AND JAMS -ORDER STORAGE: 9 MEMORY LOCATIONS FOR REPEAT ORDERS -EXPANDABILITY: UP TO 6 TOWERS (60 STATIONS) PROGRAMS: -DOUBLE CYCLE (NONSTOPBETRIEB) - INJECT (1 X AND 2 X) - BROCHURE PROGRAM -BLOCK PROGRAM -SELECTIVE GATHERING -FORMAT: MAX 500X350MM; MIN. 148X120MM -PAPER WEIGHT: 40-250 G / M&ACIRC;&SUP2; -LOAD CAPACITY: 55 MM / STATION -CAPACITY: UP TO 9,500 RECORDS/H -POWER: 230V/50 HZ - 1, 86KW -DIMENSIONS: 842 X 652 X 1, 961MM -WEIGHT: 310KG HORIZON SPF-20A STAPLING AND FOLDING UNIT: -FORMAT SETTING: FULLY AUTOMATIC - DIN FORMATS AND STANDARD TYPES OF FOLDS: PRESET -ORDER MEMORY: 12 MEMORY SLOTS FOR SPECIAL FORMATS + ALL DIN FORMATS -STITCHING HEADS: 2 - 4 STAPLING HEADS CAN BE EXTENDED -BOOK OPPORTUNITIES: BACKSTITCH, BLOCK - CORNER STAPLING - RING EYELETS STITCHING: POSSIBLE WITH RING EYELETS STITCHING HEADS -ENTRY FORMAT: MAX 500X350MM; MIN. CONTAINER 180X120MM -PROCESSING THICKNESS: MIN. 2 SHEETS; MAX 22 SHEETS (80 G / M2) -BRACKET DISTANCE: MIN. 73 MM -WIRE DIAMETER: 26-28 -SPEED: MAX 3,600 CYCLES/H -POWER: 230V/50 HZ - 0, 45KW -DIMENSIONS: 2.710 X 810 X 1, 070MM -WEIGHT: 490 KG HORIZON FC-20A FRONT CUTTER: -COUNTER -WRONG PAPER EJECT -FORMAT SIZE: MAX 250X20MM; MIN. 85MM -CROP OF FORMAT: MAX 20 MM -PROCESSING THICKNESS: MIN. 4 PAGES / MAX. 88 PAGES (80 G / M2) -SPEED: MAXIMUM 3,400 BROCHURES/H -POWER: 230V/50 HZ - 0, 2KW -DIMENSIONS: 601 X 810 X 1, 070MM -WEIGHT: 240 KG ON REQUEST, WE CAN ORGANIZE FOR YOU THE FOLLOWING POINTS: PACKING, LOADING, TRANSPORT (BY SHIP OR AIRPLANE) INCLUDING CUSTOMS CLEARANCE
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Ubicación: Land-turning diameter: 140 mm<br/>swing diameter: 250 mm<br/>turning height: 630 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 1 - 5.000 u/min<br/>power capacity at 40 % load: 38,00 kw<br/>spindle head din55026 - size: 6 <br/>spindle diameter in front bearing: 110 mm<br/>travel -x axis: 300 mm<br/>feed x-axis: 1 - 30.000 mm/min<br/>rapid traverse x-axis: 30,00 m/min<br/>feed force x axis: 9.000 n<br/>travel -z axis: 740 mm<br/>feed z-axis: 1 - 40.000 mm/min<br/>rapid traverse z-axis: 40,00 m/min<br/>feed force z axis: 10.000 n<br/>no. of tools in turret 1: 5 + 1 <br/>no. of tools in turret 2: 5 + 1 <br/>tool taper: hsk-c63/f80 <br/>total power requirement: 50,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 3,00 x 5,00 x h4,00 m<br/>vertical lathe with siemens sinumerik840d control, c-axis, driven tools,<br/>probe, loading device, chip conveyor, tailstock.<br/>workpiece gripper in machine for max. Ø90mm.<br/><br/><br/><br/><br/> TURNING DIAMETER: 140 MM
SWING DIAMETER: 250 MM
TURNING HEIGHT: 630 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 1 - 5.000 U/MIN
POWER CAPACITY AT 40 % LOAD: 38,00 KW
SPINDLE HEAD DIN55026 - SIZE: 6
SPINDLE DIAMETER IN FRONT BEARING: 110 MM
TRAVEL -X AXIS: 300 MM
FEED X-AXIS: 1 - 30.000 MM/MIN
RAPID TRAVERSE X-AXIS: 30,00 M/MIN
FEED FORCE X AXIS: 9.000 N
TRAVEL -Z AXIS: 740 MM
FEED Z-AXIS: 1 - 40.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 40,00 M/MIN
FEED FORCE Z AXIS: 10.000 N
NO. OF TOOLS IN TURRET 1: 5 + 1
NO. OF TOOLS IN TURRET 2: 5 + 1
TOOL TAPER: HSK-C63/F80
TOTAL POWER REQUIREMENT: 50,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 5,00 X H4,00 M
VERTICAL LATHE WITH SIEMENS SINUMERIK840D CONTROL, C-AXIS, DRIVEN TOOLS,
PROBE, LOADING DEVICE, CHIP CONVEYOR, TAILSTOCK.
WORKPIECE GRIPPER IN MACHINE FOR MAX. Ø90MM.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-kramer grebe sm65 cutter
most common used cutter in the industry from top brand kramer+grebe. this machine is fully stainless steel with a stainless steel bowl of 65 liters.
machine has two mixing speeds, two cutting speeds. new noise reduction cover. 6 blades cutting head. KRAMER GREBE SM65 CUTTER MOST COMMON USED CUTTER IN THE INDUSTRY FROM TOP BRAND KRAMER+GREBE. THIS MACHINE IS FULLY STAINLESS STEEL WITH A STAINLESS STEEL BOWL OF 65 LITERS. MACHINE HAS TWO MIXING SPEEDS, TWO CUTTING SPEEDS. NEW NOISE REDUCTION COVER. 6 BLADES CUTTING HEAD.
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-x-travel: 2700 mm<br/>y-travel: 1200 mm<br/>z-travel: 1500 mm<br/>control: heidenhain tnc 415 <br/>table surface area: 3000 x 1000 mm<br/>table load: 7000 kg<br/>spindle drive: 26 kw<br/>distance spindle /table: 1472 mm<br/>spindle turning speed range: 20 - 1800 u/min<br/>transmission ratio: 2 <br/>tool taper: 50 iso<br/>feed: 6 - 5000 mm/min<br/>rapid traverse: 10 m/min<br/>total power requirement: 55 kva<br/>weight of the machine ca.: 18,0 t<br/>dimensions of the machine ca.: 7357 x 5000 x 3607 mm<br/>universal milling head: nc <br/>atc (tool changer): 60-fach (pos.) <br/>coolant equipment: ja / yes <br/>chip (swarf) conveyor: ja / yes <br/>* nc universal-milling-head, swivel range 360 deg. (indexing 5 deg.) + 180 deg.<br/>* tool changer (atc) with 60-pos.<br/>* coolant equipment, swarf conveyor<br/>      <br/>in the years 2003 till 2007 the machine was overhauled for over 67.000,- eur. <br/>in the meantime the milling head was overhauled.<br/><br/>machine is in good condition and can be inspected under power.<br/><br/><br/><br/> X-TRAVEL: 2700 MM
Y-TRAVEL: 1200 MM
Z-TRAVEL: 1500 MM
CONTROL: HEIDENHAIN TNC 415
TABLE SURFACE AREA: 3000 X 1000 MM
TABLE LOAD: 7000 KG
SPINDLE DRIVE: 26 KW
DISTANCE SPINDLE /TABLE: 1472 MM
SPINDLE TURNING SPEED RANGE: 20 - 1800 U/MIN
TRANSMISSION RATIO: 2
TOOL TAPER: 50 ISO
FEED: 6 - 5000 MM/MIN
RAPID TRAVERSE: 10 M/MIN
TOTAL POWER REQUIREMENT: 55 KVA
WEIGHT OF THE MACHINE CA.: 18,0 T
DIMENSIONS OF THE MACHINE CA.: 7357 X 5000 X 3607 MM
UNIVERSAL MILLING HEAD: NC
ATC (TOOL CHANGER): 60-FACH (POS.)
COOLANT EQUIPMENT: JA / YES
CHIP (SWARF) CONVEYOR: JA / YES
* NC UNIVERSAL-MILLING-HEAD, SWIVEL RANGE 360 DEG. (INDEXING 5 DEG.) + 180 DEG.
* TOOL CHANGER (ATC) WITH 60-POS.
* COOLANT EQUIPMENT, SWARF CONVEYOR

IN THE YEARS 2003 TILL 2007 THE MACHINE WAS OVERHAULED FOR OVER 67.000,- EUR.
IN THE MEANTIME THE MILLING HEAD WAS OVERHAULED.

MACHINE IS IN GOOD CONDITION AND CAN BE INSPECTED UNDER POWER.



Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-plattenbohrwerk pr 160 cnc
manufacturer: union
year: 2007, overhaul: 2018

control siemens... sinumerik 840 d
spindeldrehdrurchmesser... 162mm
x axis... 11000mm
y axis... 3000mm
spindle speed... 5-2800.
axis w... 700mm
axis v... 1000mm
cat 50
power of main engine... 60kw

new x-axis in 2018 (beds, linear guides, rulers).
hydrostatic slide
spindle speed 2800 rpm
accessories:
-rectangular sempuco milling head, 1 ° rotation
machine in excellent condition.
options: internal cooling, plattenarrays, turntable.  PLATTENBOHRWERK PR 160 CNC MANUFACTURER: UNION YEAR: 2007, OVERHAUL: 2018 CONTROL SIEMENS... SINUMERIK 840 D SPINDELDREHDRURCHMESSER... 162MM X AXIS... 11000MM Y AXIS... 3000MM SPINDLE SPEED... 5-2800. AXIS W... 700MM AXIS V... 1000MM CAT 50 POWER OF MAIN ENGINE... 60KW NEW X-AXIS IN 2018 (BEDS, LINEAR GUIDES, RULERS). HYDROSTATIC SLIDE SPINDLE SPEED 2800 RPM ACCESSORIES: -RECTANGULAR SEMPUCO MILLING HEAD, 1 ° ROTATION MACHINE IN EXCELLENT CONDITION. OPTIONS: INTERNAL COOLING, PLATTENARRAYS, TURNTABLE.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-x-travel: 880 mm<br/>y-travel: 630 mm<br/>z-travel: 630 mm<br/>table surface area: 1250 x 700 mm<br/>nc-rotary table: integriert, 700 mmø<br/>spindle taper: sk 40 <br/>spindle taper: din 69871 <br/>spindle turning speed - stepless: 20 - 12.000 u/min<br/>control: heidenhain <br/>control: tnc 430 <br/>feeds x/y/z -stepless: 20 - 15.000 mm/min<br/>rapid traverse: 30 m/min<br/>atc: 32 (2 x 16) pos<br/>tool diameter: 80 / 130 mm<br/>workpiece length: 315 mm<br/>weight of tools max.: 8 kg<br/>nc-rotary table - speed -: max. 15 u/min<br/>table load: 600 / 500 kg<br/>internal coolant system feed: ja / yes <br/>total power requirement: 60 kw<br/>weight of the machine ca.: 9,6 t<br/>= 5-axis machining center, table clamping surface 1250 x 700 mm with<br/>  integrated nc-rotary table (=4th axis), movement of milling head via<br/>  control (=5th axis)<br/><br/>accessories: electron. handwheel, chip conveyor (snailconveyor),<br/>             coolant<br/><br/><br/><br/><br/><br/> X-TRAVEL: 880 MM
Y-TRAVEL: 630 MM
Z-TRAVEL: 630 MM
TABLE SURFACE AREA: 1250 X 700 MM
NC-ROTARY TABLE: INTEGRIERT, 700 MMø
SPINDLE TAPER: SK 40
SPINDLE TAPER: DIN 69871
SPINDLE TURNING SPEED - STEPLESS: 20 - 12.000 U/MIN
CONTROL: HEIDENHAIN
CONTROL: TNC 430
FEEDS X/Y/Z -STEPLESS: 20 - 15.000 MM/MIN
RAPID TRAVERSE: 30 M/MIN
ATC: 32 (2 X 16) POS
TOOL DIAMETER: 80 / 130 MM
WORKPIECE LENGTH: 315 MM
WEIGHT OF TOOLS MAX.: 8 KG
NC-ROTARY TABLE - SPEED -: MAX. 15 U/MIN
TABLE LOAD: 600 / 500 KG
INTERNAL COOLANT SYSTEM FEED: JA / YES
TOTAL POWER REQUIREMENT: 60 KW
WEIGHT OF THE MACHINE CA.: 9,6 T
= 5-AXIS MACHINING CENTER, TABLE CLAMPING SURFACE 1250 X 700 MM WITH
INTEGRATED NC-ROTARY TABLE (=4TH AXIS), MOVEMENT OF MILLING HEAD VIA
CONTROL (=5TH AXIS)

ACCESSORIES: ELECTRON. HANDWHEEL, CHIP CONVEYOR (SNAILCONVEYOR),
COOLANT





Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Precio: 50.000 €
Ubicación: Land-- four colours size 36x52 cms. straight machine
- year 2005, only 31 mil. impressions
- shinohara continuous alcohol dampening with baldwin refrigeration system
- semi automatic plate change
- all automatic washing devices, all chromed cylinders
- table control for inks and plates registers, cocking
- only one owner, in production, available immediately, any print test possible
 - FOUR COLOURS SIZE 36X52 CMS. STRAIGHT MACHINE - YEAR 2005, ONLY 31 MIL. IMPRESSIONS - SHINOHARA CONTINUOUS ALCOHOL DAMPENING WITH BALDWIN REFRIGERATION SYSTEM - SEMI AUTOMATIC PLATE CHANGE - ALL AUTOMATIC WASHING DEVICES, ALL CHROMED CYLINDERS - TABLE CONTROL FOR INKS AND PLATES REGISTERS, COCKING - ONLY ONE OWNER, IN PRODUCTION, AVAILABLE IMMEDIATELY, ANY PRINT TEST POSSIBLE
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 110 kg<br/>dimensions (l x w x h) approx.: 800 x 900 x 1700 mm<br/>description: serial number 3256, to drilling and inserting hinges, motor 0.75 kw-2800 rpm, head with 3 spindles, 2 pneumatic clamps, actuating by button, table size 800 x 500 mm, it is included the table where it is mounted WEIGHT APPROX.: 110 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 900 X 1700 MM
DESCRIPTION: SERIAL NUMBER 3256, TO DRILLING AND INSERTING HINGES, MOTOR 0.75 KW-2800 RPM, HEAD WITH 3 SPINDLES, 2 PNEUMATIC CLAMPS, ACTUATING BY BUTTON, TABLE SIZE 800 X 500 MM, IT IS INCLUDED THE TABLE WHERE IT IS MOUNTED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
no. 04112

electro-hydraulic veneer press ott ju 90

used, fully functional
dimensions 2250 x 1200 mm
aluminium plates in good condition
total pressure 320 bar 80 to
spec. pressure at full occupancy 3 kg / cm2
spec. pressure at 2 m2 occupancy 4 kg / cm2
4 pressure cylinder diameter 90 mm
opening width 400 mm
el. heater 12 kw
machine dimensions: 2620 x 1320 x 2010 mm lwh
weight approx. 3200 kg

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the  NO. 04112 ELECTRO-HYDRAULIC VENEER PRESS OTT JU 90 USED, FULLY FUNCTIONAL DIMENSIONS 2250 X 1200 MM ALUMINIUM PLATES IN GOOD CONDITION TOTAL PRESSURE 320 BAR 80 TO SPEC. PRESSURE AT FULL OCCUPANCY 3 KG / CM2 SPEC. PRESSURE AT 2 M2 OCCUPANCY 4 KG / CM2 4 PRESSURE CYLINDER DIAMETER 90 MM OPENING WIDTH 400 MM EL. HEATER 12 KW MACHINE DIMENSIONS: 2620 X 1320 X 2010 MM LWH WEIGHT APPROX. 3200 KG USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 4900 x 2600 x 2450 mm<br/>description: serial number al1/003221, total installed power approx. 16 kw, working area 2250 x 900 mm, panel passage height 180 mm, travelling way x-axis: 2535 mm, travelling way y-axis: 1080 mm, travelling way z-axis: 200 mm, maximum travel speed in the axes direction x-y: 67-67 m/min, maximum programmable speed in axes direction x-y-z: 50-45-22.50 m/min, main spindle 4.40 kw-max. 18000 rpm, saw unit, drilling head vertical x-axis: 6, drilling head vertical y-axis: 5, drilling head horizontal x-axis: 1 + 1, drilling head horizontal y-axis: 1 + 1, control pc-office num, xilog 3 mmi software, 6 consoles with 2 vacuum suction cups each, vacuum pump, the tools that appears in the photos are included WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 4900 X 2600 X 2450 MM
DESCRIPTION: SERIAL NUMBER AL1/003221, TOTAL INSTALLED POWER APPROX. 16 KW, WORKING AREA 2250 X 900 MM, PANEL PASSAGE HEIGHT 180 MM, TRAVELLING WAY X-AXIS: 2535 MM, TRAVELLING WAY Y-AXIS: 1080 MM, TRAVELLING WAY Z-AXIS: 200 MM, MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y: 67-67 M/MIN, MAXIMUM PROGRAMMABLE SPEED IN AXES DIRECTION X-Y-Z: 50-45-22.50 M/MIN, MAIN SPINDLE 4.40 KW-MAX. 18000 RPM, SAW UNIT, DRILLING HEAD VERTICAL X-AXIS: 6, DRILLING HEAD VERTICAL Y-AXIS: 5, DRILLING HEAD HORIZONTAL X-AXIS: 1 + 1, DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1, CONTROL PC-OFFICE NUM, XILOG 3 MMI SOFTWARE, 6 CONSOLES WITH 2 VACUUM SUCTION CUPS EACH, VACUUM PUMP, THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04101

veneer press ott ju 2512

used, good condition

electro-hydraulic, electric heating
total power approx. 20 kwt
elkom aluminium panel 2550 x 1200 mm
total pressure 90 to.
spec. pressing pressure 3-4,0 kg / cmâ²
opening width 400 mm
key control for open-close-stop pressure monitoring with automatic. reenactment
hawe hydraulics control, 2-stage pump
security ripcord
good condition transport dimensions lwh 2950 x 1350 x 1995 mm
weight 3.6 to

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the   NO. 04101 VENEER PRESS OTT JU 2512 USED, GOOD CONDITION ELECTRO-HYDRAULIC, ELECTRIC HEATING TOTAL POWER APPROX. 20 KWT ELKOM ALUMINIUM PANEL 2550 X 1200 MM TOTAL PRESSURE 90 TO. SPEC. PRESSING PRESSURE 3-4,0 KG / CM&ACIRC;&SUP2; OPENING WIDTH 400 MM KEY CONTROL FOR OPEN-CLOSE-STOP PRESSURE MONITORING WITH AUTOMATIC. REENACTMENT HAWE HYDRAULICS CONTROL, 2-STAGE PUMP SECURITY RIPCORD GOOD CONDITION TRANSPORT DIMENSIONS LWH 2950 X 1350 X 1995 MM WEIGHT 3.6 TO USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-weight approx.: 420 kg<br/>dimensions (l x w x h) approx.: 1850 x 1180 x 1330 mm<br/>description: multi drilling machine, dowel drilling machine<br> serial number 891412<br> workpiece thickness from 10 mm up to 80 mm<br> maximum drilling depth approx. 80 mm<br> maximum lengthwise distance between vertical heads approx.850 mm<br> maximum transverse distance between first and last spindle 640 mm<br> 1 x horizontal drilling head with 21 spindles, pitch 32 mm, motor 001 kw<br> 2 x swiveling vertical drilling heads with 21 spindles each, pitch 32 mm, motor 002 kw<br> pneumatic stops<br> 2 pneumatic clamps<br> accioning by pedal WEIGHT APPROX.: 420 KG
DIMENSIONS (L X W X H) APPROX.: 1850 X 1180 X 1330 MM
DESCRIPTION: MULTI DRILLING MACHINE, DOWEL DRILLING MACHINE
SERIAL NUMBER 891412
WORKPIECE THICKNESS FROM 10 MM UP TO 80 MM
MAXIMUM DRILLING DEPTH APPROX. 80 MM
MAXIMUM LENGTHWISE DISTANCE BETWEEN VERTICAL HEADS APPROX.850 MM
MAXIMUM TRANSVERSE DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM
1 X HORIZONTAL DRILLING HEAD WITH 21 SPINDLES, PITCH 32 MM, MOTOR 001 KW
2 X SWIVELING VERTICAL DRILLING HEADS WITH 21 SPINDLES EACH, PITCH 32 MM, MOTOR 002 KW
PNEUMATIC STOPS
2 PNEUMATIC CLAMPS
ACCIONING BY PEDAL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04122

hydraulic plate press bernardo hfp 100-1

2013, mint condition

press area 2500 x 1300 mm
to force 100
maximum opening width 380 mm
number press platens 1 pcs.
number of cylinders 6 pcs. x ã? 85 mm
hydraulic pump 4,0 kw
oil conveying motor 1,5 kw
heating output 18 kw

properties:
high operating comfort through the open construction (from all 4 sides open)
heavy and rigid welded steel construction
42 mm press plates guarantee a permanently flat compression surfaces
standard with digital thermometer and timer
uniform temperature of the pressing plate by thermal oil heating
maintenance-free and ground pressure cylinder for long life

machine dimensions (w x d x h) 3700 x 1660 x 1980 mm

weight 4900 kg

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the  NO. 04122 HYDRAULIC PLATE PRESS BERNARDO HFP 100-1 2013, MINT CONDITION PRESS AREA 2500 X 1300 MM TO FORCE 100 MAXIMUM OPENING WIDTH 380 MM NUMBER PRESS PLATENS 1 PCS. NUMBER OF CYLINDERS 6 PCS. X &ATILDE;? 85 MM HYDRAULIC PUMP 4,0 KW OIL CONVEYING MOTOR 1,5 KW HEATING OUTPUT 18 KW PROPERTIES: HIGH OPERATING COMFORT THROUGH THE OPEN CONSTRUCTION (FROM ALL 4 SIDES OPEN) HEAVY AND RIGID WELDED STEEL CONSTRUCTION 42 MM PRESS PLATES GUARANTEE A PERMANENTLY FLAT COMPRESSION SURFACES STANDARD WITH DIGITAL THERMOMETER AND TIMER UNIFORM TEMPERATURE OF THE PRESSING PLATE BY THERMAL OIL HEATING MAINTENANCE-FREE AND GROUND PRESSURE CYLINDER FOR LONG LIFE MACHINE DIMENSIONS (W X D X H) 3700 X 1660 X 1980 MM WEIGHT 4900 KG USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 9.750 €
Ubicación: Land-weight approx.: 5300 kg<br/>dimensions (l x w x h) approx.: 7000 x 3100 x 2650 mm<br/>description: ? cnc machining center<br> ? serial number 2930880772l<br> ? working table dimensions approx. 4000 x 1200 mm<br> ? travelling way x-axis: 4420 mm, travelling way y-axis: 1720 mm, travelling way z-axis: 330 mm<br> ? maximum travel speed in the axes direction x-y-z: 100-55-25 m/min<br> ? tool changer with 12 positions<br> ? main spindle with connection hsk f63<br> ? drilling head vertical x-axis: 5<br> ? drilling head horizontal x-axis: 1 + 1<br> ? drilling head horizontal y-axis: 1 + 1<br> ? automatic lubrication<br> ? software windows/xilog plus<br> ? vacuum pump becker vtlf 250 with capacity 248 m3/h<br> ? the tools that appears in the photos are included WEIGHT APPROX.: 5300 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 3100 X 2650 MM
DESCRIPTION: ? CNC MACHINING CENTER
? SERIAL NUMBER 2930880772L
? WORKING TABLE DIMENSIONS APPROX. 4000 X 1200 MM
? TRAVELLING WAY X-AXIS: 4420 MM, TRAVELLING WAY Y-AXIS: 1720 MM, TRAVELLING WAY Z-AXIS: 330 MM
? MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y-Z: 100-55-25 M/MIN
? TOOL CHANGER WITH 12 POSITIONS
? MAIN SPINDLE WITH CONNECTION HSK F63
? DRILLING HEAD VERTICAL X-AXIS: 5
? DRILLING HEAD HORIZONTAL X-AXIS: 1 + 1
? DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1
? AUTOMATIC LUBRICATION
? SOFTWARE WINDOWS/XILOG PLUS
? VACUUM PUMP BECKER VTLF 250 WITH CAPACITY 248 M3/H
? THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04102

veneer press ott ju 2511

used, good condition

electro-hydraulic, electric heating
total power approx. 20 kwt
aluminium plates 2550 x 1100 mm, with foil covered
total pressure 70 to.
4 cylinder, 80 mm in diameter
spec. press pressure 2,5-3,5 kg / cmâ²
opening width 400 mm
key control for open-close-stop pressure monitoring with automatic. reenactment
hawe hydraulics control, 2-stage pump
security ripcord
good condition transport dimensions lwh 2950 x 1250 x 2000 mm
weight 3.0 to

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the   NO. 04102 VENEER PRESS OTT JU 2511 USED, GOOD CONDITION ELECTRO-HYDRAULIC, ELECTRIC HEATING TOTAL POWER APPROX. 20 KWT ALUMINIUM PLATES 2550 X 1100 MM, WITH FOIL COVERED TOTAL PRESSURE 70 TO. 4 CYLINDER, 80 MM IN DIAMETER SPEC. PRESS PRESSURE 2,5-3,5 KG / CM&ACIRC;&SUP2; OPENING WIDTH 400 MM KEY CONTROL FOR OPEN-CLOSE-STOP PRESSURE MONITORING WITH AUTOMATIC. REENACTMENT HAWE HYDRAULICS CONTROL, 2-STAGE PUMP SECURITY RIPCORD GOOD CONDITION TRANSPORT DIMENSIONS LWH 2950 X 1250 X 2000 MM WEIGHT 3.0 TO USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 58000 kg<br/>dimensions (l x w x h) approx.: 10000 x 4000 x 4900 mm<br/>description: droop + rein fsm 1406 bed type milling machine with integrated 2-axis fork milling head - travels: x - 2400 mm, y - 1400 mm, z - 1350 mm, c - 360 ° spinning, a - 95 ° right and left - feeds x, y, z max. 3000 mm / min - feeds a, c max. 2160 ° / min - control since 2010 heidenhain tnc 530 for 5 axles - table clamping surface 3000 x 1400 mm - table load max. 10,000 kg - tool holder sk 50 - drive power 25 kw - spindle speed adjustable in 4 ranges 40 - 4000 rpm - number of controlled axes 5 - throat 1500 mm - tool changer with 24 places WEIGHT APPROX.: 58000 KG
DIMENSIONS (L X W X H) APPROX.: 10000 X 4000 X 4900 MM
DESCRIPTION: DROOP + REIN FSM 1406 BED TYPE MILLING MACHINE WITH INTEGRATED 2-AXIS FORK MILLING HEAD - TRAVELS: X - 2400 MM, Y - 1400 MM, Z - 1350 MM, C - 360 ° SPINNING, A - 95 ° RIGHT AND LEFT - FEEDS X, Y, Z MAX. 3000 MM / MIN - FEEDS A, C MAX. 2160 ° / MIN - CONTROL SINCE 2010 HEIDENHAIN TNC 530 FOR 5 AXLES - TABLE CLAMPING SURFACE 3000 X 1400 MM - TABLE LOAD MAX. 10,000 KG - TOOL HOLDER SK 50 - DRIVE POWER 25 KW - SPINDLE SPEED ADJUSTABLE IN 4 RANGES 40 - 4000 RPM - NUMBER OF CONTROLLED AXES 5 - THROAT 1500 MM - TOOL CHANGER WITH 24 PLACES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-no. 04099

veneer press ott ju 2511/70

used, very good condition, 1990.
electro-hydraulic, 13.6 kwt
anodised aluminium sheets 2550 x 1100 mm
4 hydraulic cylinder 90 mm in diameter
total pressure 80 to.
spec. press pressure 2,5-3,5 kg / cmâ²
opening width 400 mm
key control for open-close-stop pressure monitoring with automatic adjustment
adjustable limit switch for specific opening width
hawe pump
security ripcord
transport dimensions lwh 2950 x 1250 x 1900 mm
weight 3.5 to

used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the   NO. 04099 VENEER PRESS OTT JU 2511/70 USED, VERY GOOD CONDITION, 1990. ELECTRO-HYDRAULIC, 13.6 KWT ANODISED ALUMINIUM SHEETS 2550 X 1100 MM 4 HYDRAULIC CYLINDER 90 MM IN DIAMETER TOTAL PRESSURE 80 TO. SPEC. PRESS PRESSURE 2,5-3,5 KG / CM&ACIRC;&SUP2; OPENING WIDTH 400 MM KEY CONTROL FOR OPEN-CLOSE-STOP PRESSURE MONITORING WITH AUTOMATIC ADJUSTMENT ADJUSTABLE LIMIT SWITCH FOR SPECIFIC OPENING WIDTH HAWE PUMP SECURITY RIPCORD TRANSPORT DIMENSIONS LWH 2950 X 1250 X 1900 MM WEIGHT 3.5 TO USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 4.600 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 6250 x 2860 x 1650 mm<br/>description: ? cnc automatic drilling machine, cnc boring machine<br> ? serial number 076412<br> ? total installed power approx. 8.62 kw<br> ? maximum workpiece size approx. 4000 x 800 x 50 mm<br> ? minimum workpiece size approx. 300 x 100 x 10 mm<br> ? drilling head vertical: 22<br> ? drilling head horizontal x-axis: 2 + 2<br> ? drilling head horizontal y-axis: 1 + 1<br> ? controlled by pc<br> ? input roller conveyor 2250 mm long<br> ? output roller conveyor 2200 mm long with lifter table<br> ? return system for workpieces by the top<br> ? the tools that appears in the photos are not included WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 6250 X 2860 X 1650 MM
DESCRIPTION: ? CNC AUTOMATIC DRILLING MACHINE, CNC BORING MACHINE
? SERIAL NUMBER 076412
? TOTAL INSTALLED POWER APPROX. 8.62 KW
? MAXIMUM WORKPIECE SIZE APPROX. 4000 X 800 X 50 MM
? MINIMUM WORKPIECE SIZE APPROX. 300 X 100 X 10 MM
? DRILLING HEAD VERTICAL: 22
? DRILLING HEAD HORIZONTAL X-AXIS: 2 + 2
? DRILLING HEAD HORIZONTAL Y-AXIS: 1 + 1
? CONTROLLED BY PC
? INPUT ROLLER CONVEYOR 2250 MM LONG
? OUTPUT ROLLER CONVEYOR 2200 MM LONG WITH LIFTER TABLE
? RETURN SYSTEM FOR WORKPIECES BY THE TOP
? THE TOOLS THAT APPEARS IN THE PHOTOS ARE NOT INCLUDED
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more CMS types: