3864 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-demag crane 3.2 t with radio remote control and scale
manufacturer: demag cranes & components gmbh
year of construction: 1992
capacity: 3.2 t
span crane: 16300 mm
number d. wheels crane: 4 pcs.
number d. wheels cat: 4 pcs.
operation mode: radio control
additional equipment: built-in scale

DEMAG CRANE 3.2 T WITH RADIO REMOTE CONTROL AND SCALE MANUFACTURER: DEMAG CRANES & COMPONENTS GMBH YEAR OF CONSTRUCTION: 1992 CAPACITY: 3.2 T SPAN CRANE: 16300 MM NUMBER D. WHEELS CRANE: 4 PCS. NUMBER D. WHEELS CAT: 4 PCS. OPERATION MODE: RADIO CONTROL ADDITIONAL EQUIPMENT: BUILT-IN SCALE
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: 31.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-volume flow: 1040dm³/min, motor power: 7.5kw, operational hours: ca. 7000h.  VOLUME FLOW: 1040DM³/MIN, MOTOR POWER: 7.5KW, OPERATIONAL HOURS: CA. 7000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 22.000 EU€
Ubicación: Land-the machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. possibility to use other cleaners - glass, corundum, sand, etc. from the smallest grain granulation (baking soda) to the thickest 2-3 mm. smooth regulation of cleaning power, with surface smooth and rough, without damage. waste throws dry and in water-free modes, hydrodynamically and in a water mix. round nozzles from size # 3 to # 4 and flat nozzles are possible. construction of a carbon and brass steel cleaner, grooved palette. THE MACHINE IS DESIGNED FOR ECO-FRIENDLY REMOVAL OF PAINTS AND CONTAMINANTS USING A SPRAY OF BAKING SODA IN VARIOUS GRANULATIONS. POSSIBILITY TO USE OTHER CLEANERS - GLASS, CORUNDUM, SAND, ETC. FROM THE SMALLEST GRAIN GRANULATION (BAKING SODA) TO THE THICKEST 2-3 MM. SMOOTH REGULATION OF CLEANING POWER, WITH SURFACE SMOOTH AND ROUGH, WITHOUT DAMAGE. WASTE THROWS DRY AND IN WATER-FREE MODES, HYDRODYNAMICALLY AND IN A WATER MIX. ROUND NOZZLES FROM SIZE # 3 TO # 4 AND FLAT NOZZLES ARE POSSIBLE. CONSTRUCTION OF A CARBON AND BRASS STEEL CLEANER, GROOVED PALETTE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-vibrating sieves to the screening of different granule fractions.

containers with conical or on wheels.

simple, low-cost maintenance.

easy to clean.

quick replacing of the filter network.

engine 2-4 pole.

power discharge tamping system on request.

designed for continuous operation. VIBRATING SIEVES TO THE SCREENING OF DIFFERENT GRANULE FRACTIONS. CONTAINERS WITH CONICAL OR ON WHEELS. SIMPLE, LOW-COST MAINTENANCE. EASY TO CLEAN. QUICK REPLACING OF THE FILTER NETWORK. ENGINE 2-4 POLE. POWER DISCHARGE TAMPING SYSTEM ON REQUEST. DESIGNED FOR CONTINUOUS OPERATION.
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-make donati srl calcio (it), type pvc/r2, mach.no. ntp 700/520, elevator belt , material mild steel , belt material plastic , belt width 530mm, belt length 5200mm, with carriers , carrier height 50mm, with side guides /brushes, with motor 1,5 kw, 220/380 volt, mounted on frame , floorspace 7,0x1,2 m, weight 640 kgconveyor beltsconveyor screws > conveyor belts what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DONATI SRL CALCIO (IT), TYPE PVC/R2, MACH.NO. NTP 700/520, ELEVATOR BELT , MATERIAL MILD STEEL , BELT MATERIAL PLASTIC , BELT WIDTH 530MM, BELT LENGTH 5200MM, WITH CARRIERS , CARRIER HEIGHT 50MM, WITH SIDE GUIDES /BRUSHES, WITH MOTOR 1,5 KW, 220/380 VOLT, MOUNTED ON FRAME , FLOORSPACE 7,0X1,2 M, WEIGHT 640 KGCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-x-travel: 440mm, y-travel: 695mm, z-travel: 390mm, measuring probe: tesastar-i, acceleration: 1730mm/s², rapid traverse: 350mm/s, compressed air supply: 4bar, compressed air consumption: 21l/min, software: pc-dmis pro, operating system: windows xp, length: 1160mm, width: 1280mm, height: 2320mm, weight: 395kg, including probe set, computer and 17 inch lcd screen.  X-TRAVEL: 440MM, Y-TRAVEL: 695MM, Z-TRAVEL: 390MM, MEASURING PROBE: TESASTAR-I, ACCELERATION: 1730MM/S², RAPID TRAVERSE: 350MM/S, COMPRESSED AIR SUPPLY: 4BAR, COMPRESSED AIR CONSUMPTION: 21L/MIN, SOFTWARE: PC-DMIS PRO, OPERATING SYSTEM: WINDOWS XP, LENGTH: 1160MM, WIDTH: 1280MM, HEIGHT: 2320MM, WEIGHT: 395KG, INCLUDING PROBE SET, COMPUTER AND 17 INCH LCD SCREEN.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-; gross weight [kg]: 6010; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6010; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 140.000 €
Ubicación: Land-description:
continuous high-efficiency conveyor furnace(electric heated)
heat treatment - hardening, cementation,improvement, carbonitriding
total lenght 13m , 6m low and 7m high tempearture zone(3x117kw power with 3
carbon sensor probes)
oil and water thub
capacity - improvement 600kg/h  ; cementation (0,3-0,4mm) 300kg/h

condition: 6months used (the company terminated), practicly new
investment to operational state: 30 heating unit sets (tube + heater) and
a little more 
 

  DESCRIPTION: CONTINUOUS HIGH-EFFICIENCY CONVEYOR FURNACE(ELECTRIC HEATED) HEAT TREATMENT - HARDENING, CEMENTATION,IMPROVEMENT, CARBONITRIDING TOTAL LENGHT 13M , 6M LOW AND 7M HIGH TEMPEARTURE ZONE(3X117KW POWER WITH 3 CARBON SENSOR PROBES) OIL AND WATER THUB CAPACITY - IMPROVEMENT 600KG/H ; CEMENTATION (0,3-0,4MM) 300KG/H CONDITION: 6MONTHS USED (THE COMPANY TERMINATED), PRACTICLY NEW INVESTMENT TO OPERATIONAL STATE: 30 HEATING UNIT SETS (TUBE + HEATER) AND A LITTLE MORE
Vendedor: TEKER
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-; gross weight [kg]: 7300; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7300; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-photocells
program
air table
spare knife
new led screen
very good condition
 PHOTOCELLS PROGRAM AIR TABLE SPARE KNIFE NEW LED SCREEN VERY GOOD CONDITION
Vendedor: 4print
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 7300; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7300; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-used stainless steel silo
last purpose: food

volume: 1200l
type: standing materials (media contact): stainless steel v2a
design: single-walled
bottom: conical bottom
topsoil: fully removable / screwed / hinged lid
working pressure according to the nameplate: atm

dimensions tank:

inside diameter: 1130mm
outside diameter: 1150 mm
cyl. height: 990mm
distance from drain to the ground: 260 mm
total height: 2010 mm
width: 1190x1190mm
height of the frame: 85mm

materials:

interior: stainless steel 1.4301 / v2a
exterior: stainless steel 1.4301 / v2a

facilities:

completely removable top shelf / screwed / hinged lid
outlet: dn 50 USED STAINLESS STEEL SILO LAST PURPOSE: FOOD VOLUME: 1200L TYPE: STANDING MATERIALS (MEDIA CONTACT): STAINLESS STEEL V2A DESIGN: SINGLE-WALLED BOTTOM: CONICAL BOTTOM TOPSOIL: FULLY REMOVABLE / SCREWED / HINGED LID WORKING PRESSURE ACCORDING TO THE NAMEPLATE: ATM DIMENSIONS TANK: INSIDE DIAMETER: 1130MM OUTSIDE DIAMETER: 1150 MM CYL. HEIGHT: 990MM DISTANCE FROM DRAIN TO THE GROUND: 260 MM TOTAL HEIGHT: 2010 MM WIDTH: 1190X1190MM HEIGHT OF THE FRAME: 85MM MATERIALS: INTERIOR: STAINLESS STEEL 1.4301 / V2A EXTERIOR: STAINLESS STEEL 1.4301 / V2A FACILITIES: COMPLETELY REMOVABLE TOP SHELF / SCREWED / HINGED LID OUTLET: DN 50
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 7300; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7300; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-we can offer you 5 x barmag fk6-1000v texturizing machines,manufactured in 2011,240 spindles,with spandex(lycra) device,still working,good maintenance.

we machinery dealer of polymwerization,poy,fdy,dty,staple,nonwoven amd spare parts.  WE CAN OFFER YOU 5 X BARMAG FK6-1000V TEXTURIZING MACHINES,MANUFACTURED IN 2011,240 SPINDLES,WITH SPANDEX(LYCRA) DEVICE,STILL WORKING,GOOD MAINTENANCE. WE MACHINERY DEALER OF POLYMWERIZATION,POY,FDY,DTY,STAPLE,NONWOVEN AMD SPARE PARTS.
Vendedor: SHANGHAI HELM IMP.& EXP. LTD
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7300; rear tyres remaining: 70; front tyres remaining: 70; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7300; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-year built: approx 1972
max tube length: 1500 mm
maximum pipe diameter: 40 x 3 mm
total power consumption: approx. 3 kw / 380 v
machine weight: 800 kg

equipment / accessories:

div. bending tools

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing power.
one ord. rchng. plus ges. vat will be issued. YEAR BUILT: APPROX 1972 MAX TUBE LENGTH: 1500 MM MAXIMUM PIPE DIAMETER: 40 X 3 MM TOTAL POWER CONSUMPTION: APPROX. 3 KW / 380 V MACHINE WEIGHT: 800 KG EQUIPMENT / ACCESSORIES: DIV. BENDING TOOLS ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING POWER. ONE ORD. RCHNG. PLUS GES. VAT WILL BE ISSUED.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 7300; rear tyres remaining: 40; front tyres remaining: 40; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7300; REAR TYRES REMAINING: 40; FRONT TYRES REMAINING: 40; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-1 used pan mixer from pemat pm 2250

manufacturer: pemat
type: pm 2250 
built 1990
capacity: 2250 l / 1500 l  
output: 1.5 m³ 
power mixer: 55 kw


ready for pickup

location: near to fulda/germany
available: immediately

price is net from site
reserved, errors or misrepresentations subject to prior sale, no guarantee or warranty, as seen, lying or standing  1 USED PAN MIXER FROM PEMAT PM 2250 MANUFACTURER: PEMAT TYPE: PM 2250 BUILT 1990 CAPACITY: 2250 L / 1500 L OUTPUT: 1.5 M³ POWER MIXER: 55 KW READY FOR PICKUP LOCATION: NEAR TO FULDA/GERMANY AVAILABLE: IMMEDIATELY PRICE IS NET FROM SITE RESERVED, ERRORS OR MISREPRESENTATIONS SUBJECT TO PRIOR SALE, NO GUARANTEE OR WARRANTY, AS SEEN, LYING OR STANDING
Vendedor: Sprenger Machinery - René Sprenger
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; gross weight [kg]: 3260; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3260; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-it is a used arulex store oven crossy c4 on moveable base with doors (built year 2000) for sale. the oven is fully functional and in good condition. for trays 60 x 40, 5 shelves.

price on request.  IT IS A USED ARULEX STORE OVEN CROSSY C4 ON MOVEABLE BASE WITH DOORS (BUILT YEAR 2000) FOR SALE. THE OVEN IS FULLY FUNCTIONAL AND IN GOOD CONDITION. FOR TRAYS 60 X 40, 5 SHELVES. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: 23.900 €
Ubicación: Land-; gross weight [kg]: 3160; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3160; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-recon

-----------------------------------------------------------------------------
please note: we also have other various recon parts of different manufacturers / types in stock. 
we are pleased to provide you with our current stock list.


if you have any further questions do not hesitate to contact us
RECON ----------------------------------------------------------------------------- PLEASE NOTE: WE ALSO HAVE OTHER VARIOUS RECON PARTS OF DIFFERENT MANUFACTURERS / TYPES IN STOCK. WE ARE PLEASED TO PROVIDE YOU WITH OUR CURRENT STOCK LIST. IF YOU HAVE ANY FURTHER QUESTIONS DO NOT HESITATE TO CONTACT US
Vendedor: August Storm GmbH & Co. KG
Año de construcción: usado
Precio: 23.900 €
Ubicación: Land-; gross weight [kg]: 3160; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 3160; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 17.500 €
Ubicación: Land-recon

crank shaft
-1 level undersize
-operating hours: 0h

-----------------------------------------------------------------------------
please note: we also have other various recon parts of different manufacturers / types in stock. 
we are pleased to provide you with our current stock list.


if you have any further questions do not hesitate to contact us
RECON CRANK SHAFT -1 LEVEL UNDERSIZE -OPERATING HOURS: 0H ----------------------------------------------------------------------------- PLEASE NOTE: WE ALSO HAVE OTHER VARIOUS RECON PARTS OF DIFFERENT MANUFACTURERS / TYPES IN STOCK. WE ARE PLEASED TO PROVIDE YOU WITH OUR CURRENT STOCK LIST. IF YOU HAVE ANY FURTHER QUESTIONS DO NOT HESITATE TO CONTACT US
Vendedor: August Storm GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 8390; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 8390; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-trumpf bending machine mod trumabend v85 / bj. 96 / 2000 x 85 t / hub 215 / camber / cnc delem / hours: 3,300 / accessories / good condition
fe.gi.maschinen.sbg.at

trumpf press brake mod trumabend v85 / year 96 / 2000 x 85 t / stroke 215 / crowing / cnc delem / hours: 3,300 / accessories / good conditions fe.gi.maschinen.sbg.at TRUMPF BENDING MACHINE MOD TRUMABEND V85 / BJ. 96 / 2000 X 85 T / HUB 215 / CAMBER / CNC DELEM / HOURS: 3,300 / ACCESSORIES / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT TRUMPF PRESS BRAKE MOD TRUMABEND V85 / YEAR 96 / 2000 X 85 T / STROKE 215 / CROWING / CNC DELEM / HOURS: 3,300 / ACCESSORIES / GOOD CONDITIONS FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-a vacuum filler is sold by the company frey

type: f-line f190

construction year: 2013

-with intestinal clamp

-with casing machine

-fill, portion, turn off

-filling power 3.600 kg / h

-machine housing and hopper made of stainless steel

-touch screen controls

-lift for 200 l buggies A VACUUM FILLER IS SOLD BY THE COMPANY FREY TYPE: F-LINE F190 CONSTRUCTION YEAR: 2013 -WITH INTESTINAL CLAMP -WITH CASING MACHINE -FILL, PORTION, TURN OFF -FILLING POWER 3.600 KG / H -MACHINE HOUSING AND HOPPER MADE OF STAINLESS STEEL -TOUCH SCREEN CONTROLS -LIFT FOR 200 L BUGGIES
Vendedor: An-und Verkauf von Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 1,5 / 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 1,5 / 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-max. zoom: 4x, measuring height: 0.5µm, connected load: 150va, weight: 29.5kg.  MAX. ZOOM: 4X, MEASURING HEIGHT: 0.5µM, CONNECTED LOAD: 150VA, WEIGHT: 29.5KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 885 mm<br/>y-travel: 600 mm<br/>z-travel: 600 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control heidenhain itnc530<br/>nc swivel head (b-axis)<br/>nc-rotary table (c-axis)<br/>automatic tool changer for 30 tools<br/>coolant through spindle (ikz)<br/>measuring feeler<br/>chip conveyor<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    885    mm<br/>y-weg / y-travel    600    mm<br/>z-weg / z-travel    600    mm<br/>b-achse / b-axis    -10 - +110    °<br/>c-achse / c-axis    360    °<br/>spindelaufnahme / spindle taper    hsk 63    <br/>drehzahlbereich spindel / spindle speed    0-18000    upm /rpm<br/>vorschub / infeed    90    m/min<br/>nc-rundtischdurchmesser / nc-rotary table diameter    750    mm<br/>antriebsleistung / drive capacity spindle     60    kw<br/>gewicht der maschine ca. / weight    12000    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 885 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 600 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL HEIDENHAIN ITNC530
NC SWIVEL HEAD (B-AXIS)
NC-ROTARY TABLE (C-AXIS)
AUTOMATIC TOOL CHANGER FOR 30 TOOLS
COOLANT THROUGH SPINDLE (IKZ)
MEASURING FEELER
CHIP CONVEYOR

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 885 MM
Y-WEG / Y-TRAVEL 600 MM
Z-WEG / Z-TRAVEL 600 MM
B-ACHSE / B-AXIS -10 - +110 °
C-ACHSE / C-AXIS 360 °
SPINDELAUFNAHME / SPINDLE TAPER HSK 63
DREHZAHLBEREICH SPINDEL / SPINDLE SPEED 0-18000 UPM /RPM
VORSCHUB / INFEED 90 M/MIN
NC-RUNDTISCHDURCHMESSER / NC-ROTARY TABLE DIAMETER 750 MM
ANTRIEBSLEISTUNG / DRIVE CAPACITY SPINDLE 60 KW
GEWICHT DER MASCHINE CA. / WEIGHT 12000 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-cryovac oldrivers furukawa

type: fvv12-220sb

efficiency: 10-45 bags/minute

bags dimensions: width: 80-220 mm/length: 150 mm x 300 mm

water consumption: 3 l/min

vacuum pump 630 m3/h
 CRYOVAC OLDRIVERS FURUKAWA TYPE: FVV12-220SB EFFICIENCY: 10-45 BAGS/MINUTE BAGS DIMENSIONS: WIDTH: 80-220 MM/LENGTH: 150 MM X 300 MM WATER CONSUMPTION: 3 L/MIN VACUUM PUMP 630 M3/H
Vendedor: BmgTrade
Año de construcción: usado
Ubicación: Land-grinding length: 710 mm<br/>grinding width: 405 mm<br/>workpiece height: 440 mm<br/>grinding height: 440 mm<br/>dist. center of grinding spindle - table: 620 mm<br/>grinding wheel size: 355 x 50 x 127 mm<br/>grinding spindle speed: 1450 u/min<br/>table adjustment - longitudinal: 750 mm<br/>table speeds: 5 - 25 m/min<br/>cross movement - autom. and by hand: 405 / 460 mm<br/>cross feed autom.: 3 - 32 mm/hub<br/>rapid traverse cross: 35 m/min<br/>fine adjustment: 0,001 mm<br/>vertical feed autom.: 0,001 - 0,04 mm<br/>vertical rapid traverse: 160 mm/min<br/>total power requirement: 7,4 kw<br/>weight of the machine ca.: 3,8 t<br/>dimensions: 2,84 x 1,73 x 2,4 m<br/>accessories: magnetic plate 700 x 400 mm, grinding wheel with flange,<br/>             1 flange separate, dro on y-and z-axis rsf-elektronik z-520,<br/>             wheel trueing attachment, wet grinding attachment with<br/>             band filter<br/><br/><br/><br/><br/> GRINDING LENGTH: 710 MM
GRINDING WIDTH: 405 MM
WORKPIECE HEIGHT: 440 MM
GRINDING HEIGHT: 440 MM
DIST. CENTER OF GRINDING SPINDLE - TABLE: 620 MM
GRINDING WHEEL SIZE: 355 X 50 X 127 MM
GRINDING SPINDLE SPEED: 1450 U/MIN
TABLE ADJUSTMENT - LONGITUDINAL: 750 MM
TABLE SPEEDS: 5 - 25 M/MIN
CROSS MOVEMENT - AUTOM. AND BY HAND: 405 / 460 MM
CROSS FEED AUTOM.: 3 - 32 MM/HUB
RAPID TRAVERSE CROSS: 35 M/MIN
FINE ADJUSTMENT: 0,001 MM
VERTICAL FEED AUTOM.: 0,001 - 0,04 MM
VERTICAL RAPID TRAVERSE: 160 MM/MIN
TOTAL POWER REQUIREMENT: 7,4 KW
WEIGHT OF THE MACHINE CA.: 3,8 T
DIMENSIONS: 2,84 X 1,73 X 2,4 M
ACCESSORIES: MAGNETIC PLATE 700 X 400 MM, GRINDING WHEEL WITH FLANGE,
1 FLANGE SEPARATE, DRO ON Y-AND Z-AXIS RSF-ELEKTRONIK Z-520,
WHEEL TRUEING ATTACHMENT, WET GRINDING ATTACHMENT WITH
BAND FILTER




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-multi spindle automatic lathe afh 130-8 pour dnt proj. no. 000310 year 1991
8 spindle rotary feeder
collet chuck
in dnt version, no change gears for speed and cycle time required
-1 set of curves for cross slide - 1 set of curves for longitudinal slide high pressure coolant pump
2 sep. control panels
spindle stop setup

balluff cam schaltwerk
wã¶hrle clear text display
 MULTI SPINDLE AUTOMATIC LATHE AFH 130-8 POUR DNT PROJ. NO. 000310 YEAR 1991 8 SPINDLE ROTARY FEEDER COLLET CHUCK IN DNT VERSION, NO CHANGE GEARS FOR SPEED AND CYCLE TIME REQUIRED -1 SET OF CURVES FOR CROSS SLIDE - 1 SET OF CURVES FOR LONGITUDINAL SLIDE HIGH PRESSURE COOLANT PUMP 2 SEP. CONTROL PANELS SPINDLE STOP SETUP BALLUFF CAM SCHALTWERK W&ATILDE;&PARA;HRLE CLEAR TEXT DISPLAY
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 1000 mm<br/>grinding width: 500 mm<br/>workpiece height: 550 mm<br/>grinding height: 550 mm<br/>table surface area: 1420 x 400 mm<br/>table load: max. 600 kg<br/>min/max. table longitudinal travel: 150 / 1050 mm/min<br/>table speed -stepless-: 3 - 30 m/min<br/>grinding wheel size: 350 x max. 80 x 127 mm<br/>grinding spindle speed: 1460 u/min<br/>cross travel: 450 mm<br/>vertical movement: 580 mm<br/>cross feed: 1,5 - 5 m/min<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 4,9 t<br/>dimensions: 3,38 x 1,8 x 2,39 m<br/>- with autom. vertical adjustment -<br/><br/>accessories: magnetic plate 1200 x 400 mm (useable 1000 x 400 mm),<br/>             grinding wheel with flange, wheel trueing attachment,<br/>             wet grinding attachment with paper band filter<br/><br/><br/><br/><br/><br/> GRINDING LENGTH: 1000 MM
GRINDING WIDTH: 500 MM
WORKPIECE HEIGHT: 550 MM
GRINDING HEIGHT: 550 MM
TABLE SURFACE AREA: 1420 X 400 MM
TABLE LOAD: MAX. 600 KG
MIN/MAX. TABLE LONGITUDINAL TRAVEL: 150 / 1050 MM/MIN
TABLE SPEED -STEPLESS-: 3 - 30 M/MIN
GRINDING WHEEL SIZE: 350 X MAX. 80 X 127 MM
GRINDING SPINDLE SPEED: 1460 U/MIN
CROSS TRAVEL: 450 MM
VERTICAL MOVEMENT: 580 MM
CROSS FEED: 1,5 - 5 M/MIN
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 4,9 T
DIMENSIONS: 3,38 X 1,8 X 2,39 M
- WITH AUTOM. VERTICAL ADJUSTMENT -

ACCESSORIES: MAGNETIC PLATE 1200 X 400 MM (USEABLE 1000 X 400 MM),
GRINDING WHEEL WITH FLANGE, WHEEL TRUEING ATTACHMENT,
WET GRINDING ATTACHMENT WITH PAPER BAND FILTER





Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-schã¼tte multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
"" (special) to: 100/63 mm

number of independent cross slide: 6
total / working ways middle and upper carriage up: 32/20 mm
lower carriage up: 40/25 mm

spindle diameter: 224 mm
main time min/max: 0.36/150 sec.
productive time min./max.: 0.45/0.80 sec.

spindle speed from / to: 900-5000 u/min
2. area: 355-2000 u/min

nominal power of the motor: 15 kw
power supply: 50 kva
the drive motor speed: 1500 rpm
length * width (standard execution) 3705 * 1320 mm
incl. rod guide (standard execution) 6335 mm

approximate weight without rod guide and accessories: 4.6 to.
the rod guide approximately: 0.5 to.
total without accessories approx. to 5.1.
(all information according to manufacturer)

beiuyg98hw
equipment:
sub unit with rear processing
thread cutter gearbox with electric clutch
gewindescheidspindel
additional longitudinal slide on location: 1, 2 + 4, 5
discharge
hydraulic part tray in pos 6
force and farmer c02 fire equipment (non-operating)

electrical:

siemens s5 control
camshaft gear: mahani seperate control panel / control panel on the operating side and back
waheed clear text display
electrically prepared for bar loader (n)

other:
prepared for decentralized oil mist separator

machine is in our showroom under power! SCH&ATILDE;&FRAC14;TTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 600 mm<br/>grinding width: 300 mm<br/>workpiece height: 510 mm<br/>grinding height: 510 mm<br/>table surface area: 1020 x 250 mm<br/>dist. center of grinding spindle - table: 625 mm<br/>grinding wheel size: 225 x 30 x 50,8 mm<br/>grinding spindle speed: 2900 u/min<br/>table adjustment - longitudinal: 720 mm<br/>table speeds: 3 - 30 m/min<br/>cross travel: 300 mm<br/>cross feed: 1 - 30 mm/impuls<br/>rapid traverse cross: 1,5 m/min<br/>fine adjustment: 0,002 mm<br/>vertical movement: 500 mm<br/>vertical feed autom.: 0,001 - 0,999 mm<br/>vertical rapid travel: 0,25 m/min<br/>control: siemens logo! td <br/>total power requirement: 7 kw<br/>weight of the machine ca.: 2,9 t<br/>dimensions: 2,48 x 1,85 x 2,12 m<br/>accessories: magnetic plate 600 x 250 mm, grinding wheel with flange,<br/>             various flanges separate, dro on y-axis (vertical),<br/>             wheel trueing attachment, wet grinding attachment<br/><br/><br/><br/><br/> GRINDING LENGTH: 600 MM
GRINDING WIDTH: 300 MM
WORKPIECE HEIGHT: 510 MM
GRINDING HEIGHT: 510 MM
TABLE SURFACE AREA: 1020 X 250 MM
DIST. CENTER OF GRINDING SPINDLE - TABLE: 625 MM
GRINDING WHEEL SIZE: 225 X 30 X 50,8 MM
GRINDING SPINDLE SPEED: 2900 U/MIN
TABLE ADJUSTMENT - LONGITUDINAL: 720 MM
TABLE SPEEDS: 3 - 30 M/MIN
CROSS TRAVEL: 300 MM
CROSS FEED: 1 - 30 MM/IMPULS
RAPID TRAVERSE CROSS: 1,5 M/MIN
FINE ADJUSTMENT: 0,002 MM
VERTICAL MOVEMENT: 500 MM
VERTICAL FEED AUTOM.: 0,001 - 0,999 MM
VERTICAL RAPID TRAVEL: 0,25 M/MIN
CONTROL: SIEMENS LOGO! TD
TOTAL POWER REQUIREMENT: 7 KW
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS: 2,48 X 1,85 X 2,12 M
ACCESSORIES: MAGNETIC PLATE 600 X 250 MM, GRINDING WHEEL WITH FLANGE,
VARIOUS FLANGES SEPARATE, DRO ON Y-AXIS (VERTICAL),
WHEEL TRUEING ATTACHMENT, WET GRINDING ATTACHMENT




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-schuette multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
SCHUETTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-pressure: 90 t<br/>punching cross-cut in cmm: 30 in 26 mm<br/>round bar steel: 35,0 mm<br/>l-beam: 120 x 13 mm<br/>square edge steel: 32 x 32 mm<br/>flat steel: 460 x 12 mm<br/>range l-w-h:  mm<br/><br/><br/><br/><br/> PRESSURE: 90 T
PUNCHING CROSS-CUT IN CMM: 30 IN 26 MM
ROUND BAR STEEL: 35,0 MM
L-BEAM: 120 X 13 MM
SQUARE EDGE STEEL: 32 X 32 MM
FLAT STEEL: 460 X 12 MM
RANGE L-W-H: MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-automatic vertical baling line autefa, year 1999

this baling line was made by autefa in year 1999. the line has been used to press bales from a fibrous by-product from a pulp process, and is suitable for different kinds of man-made and natural materials, including cotton, wool, straw, paper, plastic etc. the baling system consists of four parallel infeed and pre-pressing lines, two main presses with wrapping and strapping functions, a two-lane rail system to and from the presses and an automated warehouse system in two floors including a lift for product bales, stackers, labelers and conveyors. the system can bale two different materials simultaneously, as each fiber line is assigned to a different pre-press.

working description:

the material is pneumatically conveyed via an air tube to a vertical dosing system. the material is separated from the transporting airflow and collected into a chamber, which cyclically releases the accumulated material into another collection chamber below it. once the desired amount is collected to the second chamber, it is gravitationally released to a pre-pressing unit below. in the pre-pressing unit, the material is pressed into a bin, which is then transported via the rail system to the main press. the main press unit presses the bale into desired dimensions, removes the bin and wraps plastic straps and film around the bale. the bin is then transported back to pre-pressing unit and the bale to an automated warehouse via the two-lane rail system.

technical data:

manufacturer: autefa solutions
year: 1999
type: uni box 2000
capacity: 220 t/day
control plc: allen bradley
number of pre-presses: 4
number of main presses: 2
number of operators: 1   AUTOMATIC VERTICAL BALING LINE AUTEFA, YEAR 1999 THIS BALING LINE WAS MADE BY AUTEFA IN YEAR 1999. THE LINE HAS BEEN USED TO PRESS BALES FROM A FIBROUS BY-PRODUCT FROM A PULP PROCESS, AND IS SUITABLE FOR DIFFERENT KINDS OF MAN-MADE AND NATURAL MATERIALS, INCLUDING COTTON, WOOL, STRAW, PAPER, PLASTIC ETC. THE BALING SYSTEM CONSISTS OF FOUR PARALLEL INFEED AND PRE-PRESSING LINES, TWO MAIN PRESSES WITH WRAPPING AND STRAPPING FUNCTIONS, A TWO-LANE RAIL SYSTEM TO AND FROM THE PRESSES AND AN AUTOMATED WAREHOUSE SYSTEM IN TWO FLOORS INCLUDING A LIFT FOR PRODUCT BALES, STACKERS, LABELERS AND CONVEYORS. THE SYSTEM CAN BALE TWO DIFFERENT MATERIALS SIMULTANEOUSLY, AS EACH FIBER LINE IS ASSIGNED TO A DIFFERENT PRE-PRESS. WORKING DESCRIPTION: THE MATERIAL IS PNEUMATICALLY CONVEYED VIA AN AIR TUBE TO A VERTICAL DOSING SYSTEM. THE MATERIAL IS SEPARATED FROM THE TRANSPORTING AIRFLOW AND COLLECTED INTO A CHAMBER, WHICH CYCLICALLY RELEASES THE ACCUMULATED MATERIAL INTO ANOTHER COLLECTION CHAMBER BELOW IT. ONCE THE DESIRED AMOUNT IS COLLECTED TO THE SECOND CHAMBER, IT IS GRAVITATIONALLY RELEASED TO A PRE-PRESSING UNIT BELOW. IN THE PRE-PRESSING UNIT, THE MATERIAL IS PRESSED INTO A BIN, WHICH IS THEN TRANSPORTED VIA THE RAIL SYSTEM TO THE MAIN PRESS. THE MAIN PRESS UNIT PRESSES THE BALE INTO DESIRED DIMENSIONS, REMOVES THE BIN AND WRAPS PLASTIC STRAPS AND FILM AROUND THE BALE. THE BIN IS THEN TRANSPORTED BACK TO PRE-PRESSING UNIT AND THE BALE TO AN AUTOMATED WAREHOUSE VIA THE TWO-LANE RAIL SYSTEM. TECHNICAL DATA: MANUFACTURER: AUTEFA SOLUTIONS YEAR: 1999 TYPE: UNI BOX 2000 CAPACITY: 220 T/DAY CONTROL PLC: ALLEN BRADLEY NUMBER OF PRE-PRESSES: 4 NUMBER OF MAIN PRESSES: 2 NUMBER OF OPERATORS: 1
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 560 x 300 x 230 mm<br/>description: absorbed power 2000 w. no-load speed 15000 /min. cutting depth 0-3.5 mm. total cut width 110 mm. rebate´s depth 16 mm<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 560 X 300 X 230 MM
DESCRIPTION: ABSORBED POWER 2000 W. NO-LOAD SPEED 15000 /MIN. CUTTING DEPTH 0-3.5 MM. TOTAL CUT WIDTH 110 MM. REBATE´S DEPTH 16 MM
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass heating furnace gt1411, year 2008

this furnace is used for heat treating of glass. the electric heaters heat up flat glass to desired temperature and the glass can be coated or treated in the coating section. the glass panel is then held in the annealing section for desired time and temperature. the loading and unloading of glass panels is done manually onto and from the roller tables. the conveyers are bushing rubber rollers to prevent the glass from scratching. the rollers are driven individually by frequency motors.

the furnace body is insulated with aluminum silicate for high efficiency. ceramic quartz rollers with low thermal expansion rate are used in heating, coating and front annealing section, and a stainless steel roller wrapped with ropes is used in lower annealing section. the furnace is equipped with an so2 gas feeding device. the feeding of gas lubricates and protects the lower surface of the glass during the production cycle.

the complete delivery includes loading and unloading tables, furnace, control system and auxiliary facilities.

make: qinhuangdao tucheng glass technology co, china
model: gt1411
year: 2008
capacity: 4.0 – 8.5 m/min clear sheet glass
top temperature: 600 - 630 °c
electricity: 250 kw, 380 v, 3-phase
dimensions: 8.0 x 2.9 x 2.4 m (lxwxh)
weight: 10 tons
temperature controller: omron ej1
control plc: siemens simatic s7-300   GLASS HEATING FURNACE GT1411, YEAR 2008 THIS FURNACE IS USED FOR HEAT TREATING OF GLASS. THE ELECTRIC HEATERS HEAT UP FLAT GLASS TO DESIRED TEMPERATURE AND THE GLASS CAN BE COATED OR TREATED IN THE COATING SECTION. THE GLASS PANEL IS THEN HELD IN THE ANNEALING SECTION FOR DESIRED TIME AND TEMPERATURE. THE LOADING AND UNLOADING OF GLASS PANELS IS DONE MANUALLY ONTO AND FROM THE ROLLER TABLES. THE CONVEYERS ARE BUSHING RUBBER ROLLERS TO PREVENT THE GLASS FROM SCRATCHING. THE ROLLERS ARE DRIVEN INDIVIDUALLY BY FREQUENCY MOTORS. THE FURNACE BODY IS INSULATED WITH ALUMINUM SILICATE FOR HIGH EFFICIENCY. CERAMIC QUARTZ ROLLERS WITH LOW THERMAL EXPANSION RATE ARE USED IN HEATING, COATING AND FRONT ANNEALING SECTION, AND A STAINLESS STEEL ROLLER WRAPPED WITH ROPES IS USED IN LOWER ANNEALING SECTION. THE FURNACE IS EQUIPPED WITH AN SO2 GAS FEEDING DEVICE. THE FEEDING OF GAS LUBRICATES AND PROTECTS THE LOWER SURFACE OF THE GLASS DURING THE PRODUCTION CYCLE. THE COMPLETE DELIVERY INCLUDES LOADING AND UNLOADING TABLES, FURNACE, CONTROL SYSTEM AND AUXILIARY FACILITIES. MAKE: QINHUANGDAO TUCHENG GLASS TECHNOLOGY CO, CHINA MODEL: GT1411 YEAR: 2008 CAPACITY: 4.0 – 8.5 M/MIN CLEAR SHEET GLASS TOP TEMPERATURE: 600 - 630 °C ELECTRICITY: 250 KW, 380 V, 3-PHASE DIMENSIONS: 8.0 X 2.9 X 2.4 M (LXWXH) WEIGHT: 10 TONS TEMPERATURE CONTROLLER: OMRON EJ1 CONTROL PLC: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2100 x 1500 x 2700 mm<br/>description: electrode force 3000 n, including swivelling electrode trimming cutter brÄuer, outreach 490 mm, height 240 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 1500 X 2700 MM
DESCRIPTION: ELECTRODE FORCE 3000 N, INCLUDING SWIVELLING ELECTRODE TRIMMING CUTTER BRÄUER, OUTREACH 490 MM, HEIGHT 240 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
automatic folder-gluer machine 
pneumatic 
max size 710 mm 
min size 125 mm 
max speed 100 mt/min 
hot melt with electronic system 
norson gluer pro blue 7 
4 guns 
nordson eclipse series epc 30 
touch screen digital program 
several molds 
cd device 
folder device 
immaculate conditions 
free of damages 
very well maintain, onw owner from new 
ready for test, under power 
available immediately AUTOMATIC FOLDER-GLUER MACHINE PNEUMATIC MAX SIZE 710 MM MIN SIZE 125 MM MAX SPEED 100 MT/MIN HOT MELT WITH ELECTRONIC SYSTEM NORSON GLUER PRO BLUE 7 4 GUNS NORDSON ECLIPSE SERIES EPC 30 TOUCH SCREEN DIGITAL PROGRAM SEVERAL MOLDS CD DEVICE FOLDER DEVICE IMMACULATE CONDITIONS FREE OF DAMAGES VERY WELL MAINTAIN, ONW OWNER FROM NEW READY FOR TEST, UNDER POWER AVAILABLE IMMEDIATELY
Vendedor: ICD
Año de construcción: usado
Precio: used machinery auction RESALE 9.900 €
Ubicación: Land-weight approx.: 4200 kg<br/>x-travel: 450 mm<br/>y-travel: 320 mm<br/>z-travel: 162 mm<br/>dimensions (l x w x h) approx.: 3700 x 2500 x 2300 mm<br/>description: charmilles robofil 4020si wire edm machine<br> - workpiece dimensions: 1100 x 760 x 360 mm<br> - max. workpiece weight: 800 kg<br> - u/v: each +/- 50°<br> - wire diameter: 0,1 - 0,3 mm<br> - wire (undercut): +/- 30° WEIGHT APPROX.: 4200 KG
X-TRAVEL: 450 MM
Y-TRAVEL: 320 MM
Z-TRAVEL: 162 MM
DIMENSIONS (L X W X H) APPROX.: 3700 X 2500 X 2300 MM
DESCRIPTION: CHARMILLES ROBOFIL 4020SI WIRE EDM MACHINE
- WORKPIECE DIMENSIONS: 1100 X 760 X 360 MM
- MAX. WORKPIECE WEIGHT: 800 KG
- U/V: EACH +/- 50°
- WIRE DIAMETER: 0,1 - 0,3 MM
- WIRE (UNDERCUT): +/- 30°
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-type of machine: universal milling machine,.
manufacturer: auerbach.
model: f315.
year of construction: 1992.
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
table: 1240 x 335 mm.
paths:.
x = 850 mm,. 
y = 330 mm,
z = 440 mm,.
spindle speed: 56-2800 rpm,.
spindle retainer: sk 40.
drive: 4.0 kw.
comment:.
3-axis digital display screen.
horizontal milling facility.
1 long milling arbor.
5 short sk40 tool holders.
coolant system.
operating instructions.
weight: 2000 kg,
     ,.	
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
    ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: UNIVERSAL MILLING MACHINE,. MANUFACTURER: AUERBACH. MODEL: F315. YEAR OF CONSTRUCTION: 1992. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TABLE: 1240 X 335 MM. PATHS:. X = 850 MM,. Y = 330 MM, Z = 440 MM,. SPINDLE SPEED: 56-2800 RPM,. SPINDLE RETAINER: SK 40. DRIVE: 4.0 KW. COMMENT:. 3-AXIS DIGITAL DISPLAY SCREEN. HORIZONTAL MILLING FACILITY. 1 LONG MILLING ARBOR. 5 SHORT SK40 TOOL HOLDERS. COOLANT SYSTEM. OPERATING INSTRUCTIONS. WEIGHT: 2000 KG, ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2100 x 1500 x 2700 mm<br/>description: electrode force 5000 n, including swivelling electrode trimming cutter brÄuer, outreach 510 mm, height 280 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 1500 X 2700 MM
DESCRIPTION: ELECTRODE FORCE 5000 N, INCLUDING SWIVELLING ELECTRODE TRIMMING CUTTER BRÄUER, OUTREACH 510 MM, HEIGHT 280 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-rinser for glass and pet bottles, fully automatic wab adv 12 000 bph
 
the rinser was made by italian wab in year 2003 and it has capacity of 12 000 bph this machine has a special grip which allows to work with both pet and glass bottles. it is designed to rinse bottles inside with water or specific detergents with adjustable concentration. as an option, machine is equipped with rinsing water filtration system which protects and avoids dirty water penetration in to rinsing system. for easy operation and format change, machine is equipped with electronic carousel height adjustment. the rinser in dismantled and in good condition.
 
technical description
 
suitable for: glass and pet bottles
manufacturer: wab (italy)
manufacturing year: 2003
model: adv 1r+1s 7-35-125-107
number of rinsing heads: 35
maximum pitch: 125 mm
capacity: 12 000 bph
used for bottle sizes: 350 - 1000 ml
bottle diameters used: 58.2 - 79.5 mm
botlle heights used: 214 - 355 mm
rinsing temperature min: 10 c - max 40 c degrees
serial nr: c646/35 adv
electricity: 220v / 50 hz
installed power: 9,5 kva   RINSER FOR GLASS AND PET BOTTLES, FULLY AUTOMATIC WAB ADV 12 000 BPH THE RINSER WAS MADE BY ITALIAN WAB IN YEAR 2003 AND IT HAS CAPACITY OF 12 000 BPH THIS MACHINE HAS A SPECIAL GRIP WHICH ALLOWS TO WORK WITH BOTH PET AND GLASS BOTTLES. IT IS DESIGNED TO RINSE BOTTLES INSIDE WITH WATER OR SPECIFIC DETERGENTS WITH ADJUSTABLE CONCENTRATION. AS AN OPTION, MACHINE IS EQUIPPED WITH RINSING WATER FILTRATION SYSTEM WHICH PROTECTS AND AVOIDS DIRTY WATER PENETRATION IN TO RINSING SYSTEM. FOR EASY OPERATION AND FORMAT CHANGE, MACHINE IS EQUIPPED WITH ELECTRONIC CAROUSEL HEIGHT ADJUSTMENT. THE RINSER IN DISMANTLED AND IN GOOD CONDITION. TECHNICAL DESCRIPTION SUITABLE FOR: GLASS AND PET BOTTLES MANUFACTURER: WAB (ITALY) MANUFACTURING YEAR: 2003 MODEL: ADV 1R+1S 7-35-125-107 NUMBER OF RINSING HEADS: 35 MAXIMUM PITCH: 125 MM CAPACITY: 12 000 BPH USED FOR BOTTLE SIZES: 350 - 1000 ML BOTTLE DIAMETERS USED: 58.2 - 79.5 MM BOTLLE HEIGHTS USED: 214 - 355 MM RINSING TEMPERATURE MIN: 10 C - MAX 40 C DEGREES SERIAL NR: C646/35 ADV ELECTRICITY: 220V / 50 HZ INSTALLED POWER: 9,5 KVA
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2100 x 1500 x 2700 mm<br/>description: electrode force 1000 n, including swivelling electrode trimming cutter brÄuer, outreach 600 mm, height 350 mm WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 1500 X 2700 MM
DESCRIPTION: ELECTRODE FORCE 1000 N, INCLUDING SWIVELLING ELECTRODE TRIMMING CUTTER BRÄUER, OUTREACH 600 MM, HEIGHT 350 MM
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ONSRUD types: