61 ofertas

Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-capacity: 10000  l/h      <br />equipment: pressure vessel (michiels, 285 l, no. 830061/1), vacuum vessel (michiels, 285 l, no. 830061/2), overpressure pump, centrifugal pump, vacuum pump, regulator: co2 injection: solenoid valve evsi 10 danfoss<br /> CAPACITY: 10000 L/H
EQUIPMENT: PRESSURE VESSEL (MICHIELS, 285 L, NO. 830061/1), VACUUM VESSEL (MICHIELS, 285 L, NO. 830061/2), OVERPRESSURE PUMP, CENTRIFUGAL PUMP, VACUUM PUMP, REGULATOR: CO2 INJECTION: SOLENOID VALVE EVSI 10 DANFOSS
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-bitzer / alfa laval l7sw1s12pp

product number:m19-4335
cooling capacity:930 kw
refrigerant:nh3/r717
refrigerant content:80 kg
voltage:400 volt
motor power:250 kw
dimensions:9.000x3.000x2.600 mm
weight:13.500 kg
year:2014
number in stock:4 piece(s)
price:quotation request

very nice and young bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. this bitzer chiller consists of a frequency controlled bitzer screw compressor (brand danfoss), weg electric motor 250 kw, horizontal oil separator, oil cooler, combined economiser/liquid separator, alfa laval plate heat exchanger evaporator, alfa laval plate heat exchanger condenser, grundfos speed controlled pumps and a control cabinet with siemens plc and touch screen.
the above mentioned capacity is at +18/12°c in/out and a flow rate of 143,7 m3/h. and a cooling water supply +40°c in (out +48°c) and flow rate of 119,5 m3/h. both cold water and cooling water are filled with 30% glycol. for the layout drawing, p&id and name plates of the chiller see pdf!
if you want additional information, you can send us an email or call us.

please also visit our website: used-refrigeration   BITZER / ALFA LAVAL L7SW1S12PP PRODUCT NUMBER:M19-4335 COOLING CAPACITY:930 KW REFRIGERANT:NH3/R717 REFRIGERANT CONTENT:80 KG VOLTAGE:400 VOLT MOTOR POWER:250 KW DIMENSIONS:9.000X3.000X2.600 MM WEIGHT:13.500 KG YEAR:2014 NUMBER IN STOCK:4 PIECE(S) PRICE:QUOTATION REQUEST VERY NICE AND YOUNG BITZER WATER-COOLED AMMONIA WATER CHILLER(S) BUILT IN A MACHINE-ROOM CONTAINER WITH MECHANICAL COOLING. THIS BITZER CHILLER CONSISTS OF A FREQUENCY CONTROLLED BITZER SCREW COMPRESSOR (BRAND DANFOSS), WEG ELECTRIC MOTOR 250 KW, HORIZONTAL OIL SEPARATOR, OIL COOLER, COMBINED ECONOMISER/LIQUID SEPARATOR, ALFA LAVAL PLATE HEAT EXCHANGER EVAPORATOR, ALFA LAVAL PLATE HEAT EXCHANGER CONDENSER, GRUNDFOS SPEED CONTROLLED PUMPS AND A CONTROL CABINET WITH SIEMENS PLC AND TOUCH SCREEN. THE ABOVE MENTIONED CAPACITY IS AT +18/12°C IN/OUT AND A FLOW RATE OF 143,7 M3/H. AND A COOLING WATER SUPPLY +40°C IN (OUT +48°C) AND FLOW RATE OF 119,5 M3/H. BOTH COLD WATER AND COOLING WATER ARE FILLED WITH 30% GLYCOL. FOR THE LAYOUT DRAWING, P&ID AND NAME PLATES OF THE CHILLER SEE PDF! IF YOU WANT ADDITIONAL INFORMATION, YOU CAN SEND US AN EMAIL OR CALL US. PLEASE ALSO VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-description:<br />\nhigh quality control unit for bottle conveyors for a huge part of a 50.000 bph filling line with several khs control units<br />\nfor approx. 44 drives in a total.<br />\n<br />\nthe khs switchboards are air conditioned.<br />\nthe danfoss inverters are overhauled and can be commissioned without concern.<br />\n<br />\nthe software might be added as well.<br />\nan andaptation to your project can be also offered.<br />\n<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NHIGH QUALITY CONTROL UNIT FOR BOTTLE CONVEYORS FOR A HUGE PART OF A 50.000 BPH FILLING LINE WITH SEVERAL KHS CONTROL UNITS
\NFOR APPROX. 44 DRIVES IN A TOTAL.
\N
\NTHE KHS SWITCHBOARDS ARE AIR CONDITIONED.
\NTHE DANFOSS INVERTERS ARE OVERHAULED AND CAN BE COMMISSIONED WITHOUT CONCERN.
\N
\NTHE SOFTWARE MIGHT BE ADDED AS WELL.
\NAN ANDAPTATION TO YOUR PROJECT CAN BE ALSO OFFERED.
\N
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-this high capacity innoket kl 2080 labeling machine was manufactured in year 2005 by khs gmbh, germany and it is dismantled in year 2013. this labelette has two stations for cold glue labeling system and it suits both for paper and foil applications. this has been used for glass bottles front-back-neck labels. it is controlled by siemens s7 plc combined with khs touch screen operator interface. labeler machine is in good operational condition. note: this labeller has no label orientation unit

technical information:
manufacturer's type: innoket kl 2080/120 - 48 lm gt
manufacturing year: 2005
code number: 1143
capacity: glass bottles 60000 bph
control plc: simatic s7 / 300
operator panel: khs touch screen
frequency converters: danfoss vlt 5000   THIS HIGH CAPACITY INNOKET KL 2080 LABELING MACHINE WAS MANUFACTURED IN YEAR 2005 BY KHS GMBH, GERMANY AND IT IS DISMANTLED IN YEAR 2013. THIS LABELETTE HAS TWO STATIONS FOR COLD GLUE LABELING SYSTEM AND IT SUITS BOTH FOR PAPER AND FOIL APPLICATIONS. THIS HAS BEEN USED FOR GLASS BOTTLES FRONT-BACK-NECK LABELS. IT IS CONTROLLED BY SIEMENS S7 PLC COMBINED WITH KHS TOUCH SCREEN OPERATOR INTERFACE. LABELER MACHINE IS IN GOOD OPERATIONAL CONDITION. NOTE: THIS LABELLER HAS NO LABEL ORIENTATION UNIT TECHNICAL INFORMATION: MANUFACTURER'S TYPE: INNOKET KL 2080/120 - 48 LM GT MANUFACTURING YEAR: 2005 CODE NUMBER: 1143 CAPACITY: GLASS BOTTLES 60000 BPH CONTROL PLC: SIMATIC S7 / 300 OPERATOR PANEL: KHS TOUCH SCREEN FREQUENCY CONVERTERS: DANFOSS VLT 5000
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 3.700 €
Ubicación: Land-description:<br />\nhigh quality control unit for pallet conveyors for a part of a 50.000 bph filling line <br />\nfor approx. 5 frequency controlled drives in a total, diverse protective switches (see pictures for details). <br />\nthe danfoss inverters are overhauled (formated) and can be commissioned without concern.<br />\nthe software might be added as well.<br />\nan andaptation to your project can be also offered.<br />\n<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NHIGH QUALITY CONTROL UNIT FOR PALLET CONVEYORS FOR A PART OF A 50.000 BPH FILLING LINE
\NFOR APPROX. 5 FREQUENCY CONTROLLED DRIVES IN A TOTAL, DIVERSE PROTECTIVE SWITCHES (SEE PICTURES FOR DETAILS).
\NTHE DANFOSS INVERTERS ARE OVERHAULED (FORMATED) AND CAN BE COMMISSIONED WITHOUT CONCERN.
\NTHE SOFTWARE MIGHT BE ADDED AS WELL.
\NAN ANDAPTATION TO YOUR PROJECT CAN BE ALSO OFFERED.
\N
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-brand: krone
power: 67 kw
year of manufacture: 2010
refrigerant circuit: 1 pieces.
type of refrigerant: r407c
compressors: 2 pcs. danfoss (scroll)
number of fans: 3 pcs.
hydraulic module: water pump, expansion vessel, buffer tank.
dimensions: 2.8 ? 1 ? 1.4 m.
weight: 960 kg.
?ondition: this chiller is in perfect condition BRAND: KRONE POWER: 67 KW YEAR OF MANUFACTURE: 2010 REFRIGERANT CIRCUIT: 1 PIECES. TYPE OF REFRIGERANT: R407C COMPRESSORS: 2 PCS. DANFOSS (SCROLL) NUMBER OF FANS: 3 PCS. HYDRAULIC MODULE: WATER PUMP, EXPANSION VESSEL, BUFFER TANK. DIMENSIONS: 2.8 ? 1 ? 1.4 M. WEIGHT: 960 KG. ?ONDITION: THIS CHILLER IS IN PERFECT CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 10.700 €
Ubicación: Land-description:<br />\nhigh quality control unit for pallet conveyors of a 50.000 bph filling line with several khs control units<br />\nfor a total of frequency controlled drives, diverse protective switch drives /see photos for details)<br />\nswitchboard with 2 pieces<br />\nthe danfoss inverters are overhauled and can be commissioned without concern.<br />\n<br />\nthe software might be added as well.<br />\nan andaptation to your project can be also offered<br />\n<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NHIGH QUALITY CONTROL UNIT FOR PALLET CONVEYORS OF A 50.000 BPH FILLING LINE WITH SEVERAL KHS CONTROL UNITS
\NFOR A TOTAL OF FREQUENCY CONTROLLED DRIVES, DIVERSE PROTECTIVE SWITCH DRIVES /SEE PHOTOS FOR DETAILS)
\NSWITCHBOARD WITH 2 PIECES
\NTHE DANFOSS INVERTERS ARE OVERHAULED AND CAN BE COMMISSIONED WITHOUT CONCERN.
\N
\NTHE SOFTWARE MIGHT BE ADDED AS WELL.
\NAN ANDAPTATION TO YOUR PROJECT CAN BE ALSO OFFERED
\N
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-
for sell   special  price !!


-complete 2018 model never used ciller grub inside technologies: danfoss, panasonic, schneider, etc.                                                       

-complete krones pet water filling line -2006-2007 –  working condition   special price !
-complete krones hot juice filling line 2010 model very lower working hours   special price !
-complete sidel pet mineralw arter filling line 2002-2006

-complete krones-sidel carbonat filling line,2005-2001     working condition   
-complete krones-ektam carbonat filling line -2004-2013
-complete krones   can filling line -1994

- 
manufacture                 year   capacity     price
              5l pet
 
-sipa  blower  5 lt   italy  -        450        14,900 euro

-asb   blower  5 l   japon   2006     850        19,900 euro 

-urola blower  5 l   spain   1999     850         9,900 euro

-sipa  blower  5 l   italy    -       450        22,000 euro    

-gym   filler  5 l   spain   1997   3.000        23,500 euro                          
 
-cimec filler  5 l   italy   1998     800        14,900 euro
 
-krones-labeling 5l  german  1997   3.200        33,900 euro

   
               10l- pet
-nissi  blower  10 lt japon   1999    450         18,900 euro
-ektam  filler  10 lt turkish 2000   1.800        16,900 euro
-ektam  filler 5-10lt turkish 1999   1,200        13,900 euro

-sampapack-shrinking 10 lt  italy 1998  2.000     27.500  euro

-ersey-labeling 5-10 lt  -turkish                 13,500 euro                                             
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-chine   blower 0,25,0,33 – 1,5, 2,5l/2008/ 9,500 bhp/h/ 78,500 euro
 
 
19ltr blower, washing and filling 

-ersey - blower, washing- filling/ 19lt/turkish-2007-2008/400 bhp/h/ 65,000 euro,working condation

-complete german brand 80 had carbonat pet  filling line ,connect to power
-complete german brand  40 had  pet- glass bottle filling line ,connect to power
-swiss brand 2, li blow molding machine,capacity is 2000bhp/h


-blow molding machine - sidel 4800 pcs/h sideltype:dsl5 / 2001  49,900 euro
-blow molding machine - sidel 4800 pcs/h sideltype:dsl5 / 2001  49,900 euro


 FOR SELL SPECIAL PRICE !! -COMPLETE 2018 MODEL NEVER USED CILLER GRUB INSIDE TECHNOLOGIES: DANFOSS, PANASONIC, SCHNEIDER, ETC. -COMPLETE KRONES PET WATER FILLING LINE -2006-2007 – WORKING CONDITION SPECIAL PRICE ! -COMPLETE KRONES HOT JUICE FILLING LINE 2010 MODEL VERY LOWER WORKING HOURS SPECIAL PRICE ! -COMPLETE SIDEL PET MINERALW ARTER FILLING LINE 2002-2006 -COMPLETE KRONES-SIDEL CARBONAT FILLING LINE,2005-2001 WORKING CONDITION -COMPLETE KRONES-EKTAM CARBONAT FILLING LINE -2004-2013 -COMPLETE KRONES CAN FILLING LINE -1994 - MANUFACTURE YEAR CAPACITY PRICE 5L PET -SIPA BLOWER 5 LT ITALY - 450 14,900 EURO -ASB BLOWER 5 L JAPON 2006 850 19,900 EURO -UROLA BLOWER 5 L SPAIN 1999 850 9,900 EURO -SIPA BLOWER 5 L ITALY - 450 22,000 EURO -GYM FILLER 5 L SPAIN 1997 3.000 23,500 EURO -CIMEC FILLER 5 L ITALY 1998 800 14,900 EURO -KRONES-LABELING 5L GERMAN 1997 3.200 33,900 EURO 10L- PET -NISSI BLOWER 10 LT JAPON 1999 450 18,900 EURO -EKTAM FILLER 10 LT TURKISH 2000 1.800 16,900 EURO -EKTAM FILLER 5-10LT TURKISH 1999 1,200 13,900 EURO -SAMPAPACK-SHRINKING 10 LT ITALY 1998 2.000 27.500 EURO -ERSEY-LABELING 5-10 LT -TURKISH 13,500 EURO -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -CHINE BLOWER 0,25,0,33 – 1,5, 2,5L/2008/ 9,500 BHP/H/ 78,500 EURO 19LTR BLOWER, WASHING AND FILLING -ERSEY - BLOWER, WASHING- FILLING/ 19LT/TURKISH-2007-2008/400 BHP/H/ 65,000 EURO,WORKING CONDATION -COMPLETE GERMAN BRAND 80 HAD CARBONAT PET FILLING LINE ,CONNECT TO POWER -COMPLETE GERMAN BRAND 40 HAD PET- GLASS BOTTLE FILLING LINE ,CONNECT TO POWER -SWISS BRAND 2, LI BLOW MOLDING MACHINE,CAPACITY IS 2000BHP/H -BLOW MOLDING MACHINE - SIDEL 4800 PCS/H SIDELTYPE:DSL5 / 2001 49,900 EURO -BLOW MOLDING MACHINE - SIDEL 4800 PCS/H SIDELTYPE:DSL5 / 2001 49,900 EURO
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-description:<br />\ndifferent versions on stock, danfoss, invertors, frequency convertors, used<br />\nlike e.g.. vlt 5000er series, fcd-series, vlt-series and corresponding displays.<br />\n<br />\nwe usually have  50-80 pcs. on stock. those have beed overhauled and can be reused without hesitation.<br />\n(complete  danfoss-series 5000 or fcd 307,311 and many more):<br />\n<br />\n200,00  / pcs                        danfoss-fcd-series up to incl. 1,5 kw                                 <br />\n230,00  / pcs                        danfoss-5000er serie up to incl. 1,5 kw                            <br />\n220,00  / pcs                        danfoss-vlt-serie up to incl. 1,5 kw                                <br />\n  35,00  / pcs                        corresponding danfoss controls                                          <br />\n  96,00  / pcs                        protective wall hanger for danfoss fcd-series                               <br />\n(all prices are exl. va)<br />\nfor frequency convertors with a capacity > 1,5 kw please ask as for an individual quotation!<br />\n<br />\nit is important for all frequency convertors not to go online directly after having been stored for a longer period of time without a power connection.<br />\nwe define overhaul as following:<br />\noptical check of the the frequency convertor; old cables are removed; cable bushings are being closed. by using a special procedure the different components are being familiarized with power again and the life period can be maintained.<br />\n<br />\nyou can return the frequency convertor within 4 weeks after delivery from our warehouse in knetzgau without providing any reasons.<br />\nif you should own any danfoss frequency convertors which have not been used for more than 1 year a similar procedure should be applied.<br />\n<br />\nwe would be happy to provide you with a best price quotation.<br />\n<br />\nwe do also have used 7 control units, complete switchboards with control units on stock. of course we can also offer you turnkey projects.<br />\n<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NDIFFERENT VERSIONS ON STOCK, DANFOSS, INVERTORS, FREQUENCY CONVERTORS, USED
\NLIKE E.G.. VLT 5000ER SERIES, FCD-SERIES, VLT-SERIES AND CORRESPONDING DISPLAYS.
\N
\NWE USUALLY HAVE 50-80 PCS. ON STOCK. THOSE HAVE BEED OVERHAULED AND CAN BE REUSED WITHOUT HESITATION.
\N(COMPLETE DANFOSS-SERIES 5000 OR FCD 307,311 AND MANY MORE):
\N
\N200,00 / PCS DANFOSS-FCD-SERIES UP TO INCL. 1,5 KW
\N230,00 / PCS DANFOSS-5000ER SERIE UP TO INCL. 1,5 KW
\N220,00 / PCS DANFOSS-VLT-SERIE UP TO INCL. 1,5 KW
\N 35,00 / PCS CORRESPONDING DANFOSS CONTROLS
\N 96,00 / PCS PROTECTIVE WALL HANGER FOR DANFOSS FCD-SERIES
\N(ALL PRICES ARE EXL. VA)
\NFOR FREQUENCY CONVERTORS WITH A CAPACITY > 1,5 KW PLEASE ASK AS FOR AN INDIVIDUAL QUOTATION!
\N
\NIT IS IMPORTANT FOR ALL FREQUENCY CONVERTORS NOT TO GO ONLINE DIRECTLY AFTER HAVING BEEN STORED FOR A LONGER PERIOD OF TIME WITHOUT A POWER CONNECTION.
\NWE DEFINE OVERHAUL AS FOLLOWING:
\NOPTICAL CHECK OF THE THE FREQUENCY CONVERTOR; OLD CABLES ARE REMOVED; CABLE BUSHINGS ARE BEING CLOSED. BY USING A SPECIAL PROCEDURE THE DIFFERENT COMPONENTS ARE BEING FAMILIARIZED WITH POWER AGAIN AND THE LIFE PERIOD CAN BE MAINTAINED.
\N
\NYOU CAN RETURN THE FREQUENCY CONVERTOR WITHIN 4 WEEKS AFTER DELIVERY FROM OUR WAREHOUSE IN KNETZGAU WITHOUT PROVIDING ANY REASONS.
\NIF YOU SHOULD OWN ANY DANFOSS FREQUENCY CONVERTORS WHICH HAVE NOT BEEN USED FOR MORE THAN 1 YEAR A SIMILAR PROCEDURE SHOULD BE APPLIED.
\N
\NWE WOULD BE HAPPY TO PROVIDE YOU WITH A BEST PRICE QUOTATION.
\N
\NWE DO ALSO HAVE USED 7 CONTROL UNITS, COMPLETE SWITCHBOARDS WITH CONTROL UNITS ON STOCK. OF COURSE WE CAN ALSO OFFER YOU TURNKEY PROJECTS.
\N
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-frigoscandia gyrocompact gc42-08-30-06-ns-ccr
product number:m19-5013
cooling capacity:100 kw
number of fans:1
fin spacing:25mm - 6mm mm
defrost:hot gas
refrigerant:nh3
refrigerant content:390 kg
voltage:400 volt
power consumption:25 kw
motor power:30 kw
dimensions:7050 x 2620 x 7400 mm
weight:6500 kg
year:1996
number in stock:1 piece(s)
price:quotation request


a nice compact frigoscandia spiral freezer. model gc 42-08-30-06-ns-nht-ccr with a product capacity of maximum 1.000 kg/h (based on green peas). in/outfeed configuration is north/south. infeed height = 560mm, outfeed height = 2540mm. belt rotation is counter clock wise, belt width gross = 420mm, belt width net = 375mm, max product height = 65mm, numbers of tiers = 30 tiers. belt mesh width = 6mm. this frigoscandia spiral freezer has been well maintained and is in top condition. the freezer is executed with a s.s. control box with siemens plc and danfoss and europdrive frequency converters, 1 ventilator (15 kw), hot-gas defrost. drawings and further technical details see pdf attached.

visit also our website: used-refrigeration FRIGOSCANDIA GYROCOMPACT GC42-08-30-06-NS-CCR PRODUCT NUMBER:M19-5013 COOLING CAPACITY:100 KW NUMBER OF FANS:1 FIN SPACING:25MM - 6MM MM DEFROST:HOT GAS REFRIGERANT:NH3 REFRIGERANT CONTENT:390 KG VOLTAGE:400 VOLT POWER CONSUMPTION:25 KW MOTOR POWER:30 KW DIMENSIONS:7050 X 2620 X 7400 MM WEIGHT:6500 KG YEAR:1996 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST A NICE COMPACT FRIGOSCANDIA SPIRAL FREEZER. MODEL GC 42-08-30-06-NS-NHT-CCR WITH A PRODUCT CAPACITY OF MAXIMUM 1.000 KG/H (BASED ON GREEN PEAS). IN/OUTFEED CONFIGURATION IS NORTH/SOUTH. INFEED HEIGHT = 560MM, OUTFEED HEIGHT = 2540MM. BELT ROTATION IS COUNTER CLOCK WISE, BELT WIDTH GROSS = 420MM, BELT WIDTH NET = 375MM, MAX PRODUCT HEIGHT = 65MM, NUMBERS OF TIERS = 30 TIERS. BELT MESH WIDTH = 6MM. THIS FRIGOSCANDIA SPIRAL FREEZER HAS BEEN WELL MAINTAINED AND IS IN TOP CONDITION. THE FREEZER IS EXECUTED WITH A S.S. CONTROL BOX WITH SIEMENS PLC AND DANFOSS AND EUROPDRIVE FREQUENCY CONVERTERS, 1 VENTILATOR (15 KW), HOT-GAS DEFROST. DRAWINGS AND FURTHER TECHNICAL DETAILS SEE PDF ATTACHED. VISIT ALSO OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-this listing is for a vlt6000 hvac variable frequency inverter. THIS LISTING IS FOR A VLT6000 HVAC VARIABLE FREQUENCY INVERTER.
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-brand: blue box
power: 102 kw
year of manufacture: 2006
refrigerant circuit: 1 pcs.
type of refrigerant: r407c
compressors: 2 pcs. (scroll) danfoss
number of fans: 3 pcs.
hydraulic module: water pump, buffer tank
dimensions: 3.3 / 1.2 / 1.8 m.
weight:	1200 kg.
country: italy
?ondition: this chiller is in a very good condition   BRAND: BLUE BOX POWER: 102 KW YEAR OF MANUFACTURE: 2006 REFRIGERANT CIRCUIT: 1 PCS. TYPE OF REFRIGERANT: R407C COMPRESSORS: 2 PCS. (SCROLL) DANFOSS NUMBER OF FANS: 3 PCS. HYDRAULIC MODULE: WATER PUMP, BUFFER TANK DIMENSIONS: 3.3 / 1.2 / 1.8 M. WEIGHT: 1200 KG. COUNTRY: ITALY ?ONDITION: THIS CHILLER IS IN A VERY GOOD CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Ubicación: Land-this listing is for a vlt6000 hvac variable frequency inverter. THIS LISTING IS FOR A VLT6000 HVAC VARIABLE FREQUENCY INVERTER.
Vendedor: PostIndustry
Año de construcción: usado
Precio: 1.160 €
Ubicación: Land-used frequency converter

type: vlt 6000 hvac

input: 3x380-460v 50/60hz 24a 21a
output: 3x0-uin 0-1000hz 24a 21a 17.3kva  USED FREQUENCY CONVERTER TYPE: VLT 6000 HVAC INPUT: 3X380-460V 50/60HZ 24A 21A OUTPUT: 3X0-UIN 0-1000HZ 24A 21A 17.3KVA
Vendedor: PowerUp GmbH
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-brand: carrier
power: 488 kw
type: with free cooling
year of manufacture: 2006
refrigerant circuit: 2 pieces
type of refrigerant: r410a
compressors: 8 pcs. danfoss(scroll)
number of fans: 8 pcs.
hydraulic module: water pump, expansion vessel.
dimensions: 4,8 / 2,3 / 2,3 m.
weight: 4820 kg.
?ondition: this chiller is in perfect condition BRAND: CARRIER POWER: 488 KW TYPE: WITH FREE COOLING YEAR OF MANUFACTURE: 2006 REFRIGERANT CIRCUIT: 2 PIECES TYPE OF REFRIGERANT: R410A COMPRESSORS: 8 PCS. DANFOSS(SCROLL) NUMBER OF FANS: 8 PCS. HYDRAULIC MODULE: WATER PUMP, EXPANSION VESSEL. DIMENSIONS: 4,8 / 2,3 / 2,3 M. WEIGHT: 4820 KG. ?ONDITION: THIS CHILLER IS IN PERFECT CONDITION
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 300 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 650 €
Ubicación: Land-heat exchanger, plate heat exchanger sondex braze sl140-50tk-ee
manufacturer: sondex / danfoss
type: sl140-50tk-ee

state:
the heat exchanger was bought from a spare parts warehouse and is completely new!

technical specifications:
at the temperatures listed below, the heat exchanger has a capacity of approx. 165kw
primary temperatures 80 ° to 60 °, secondary temperatures 55 ° to 70 °
standard material:
* plates and connections: aisi 316
* stainless steel soldered
* max. working pressure 16bar
* -20 to 185 ° c
* connections: 4 x 2.5 HEAT EXCHANGER, PLATE HEAT EXCHANGER SONDEX BRAZE SL140-50TK-EE MANUFACTURER: SONDEX / DANFOSS TYPE: SL140-50TK-EE STATE: THE HEAT EXCHANGER WAS BOUGHT FROM A SPARE PARTS WAREHOUSE AND IS COMPLETELY NEW! TECHNICAL SPECIFICATIONS: AT THE TEMPERATURES LISTED BELOW, THE HEAT EXCHANGER HAS A CAPACITY OF APPROX. 165KW PRIMARY TEMPERATURES 80 ° TO 60 °, SECONDARY TEMPERATURES 55 ° TO 70 ° STANDARD MATERIAL: * PLATES AND CONNECTIONS: AISI 316 * STAINLESS STEEL SOLDERED * MAX. WORKING PRESSURE 16BAR * -20 TO 185 ° C * CONNECTIONS: 4 X 2.5 " WIDTH 24CM, DEPTH 20CM, HEIGHT 61CM WEIGHT ABOUT 45KG (CURRENT ORIGINAL PRICE APPROX. € 1.200 EXCL. VAT)
Vendedor: IPV GmbH
Año de construcción: usado
Precio: 300 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-brand: carrier
power: 89 kw
year of manufacture: 2002
refrigerant circuit: 2 pieces.
type of refrigerant: 407c
compressors: 3 pcs. danfoss (scroll)
number of fans: 2 pcs.
hydraulic module: water pumps, expansion vessel
dimensions: 2,3 / 2,1 / 1,4 m.
weight: 1093 kg.
?ondition: this chiller is in perfect condition

do not hesitate to contact us.   BRAND: CARRIER POWER: 89 KW YEAR OF MANUFACTURE: 2002 REFRIGERANT CIRCUIT: 2 PIECES. TYPE OF REFRIGERANT: 407C COMPRESSORS: 3 PCS. DANFOSS (SCROLL) NUMBER OF FANS: 2 PCS. HYDRAULIC MODULE: WATER PUMPS, EXPANSION VESSEL DIMENSIONS: 2,3 / 2,1 / 1,4 M. WEIGHT: 1093 KG. ?ONDITION: THIS CHILLER IS IN PERFECT CONDITION DO NOT HESITATE TO CONTACT US.
Vendedor: Europrom Sp. z o.o.
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 54.000 €
Ubicación: Land-description
brand	altaqua
model	ac-l850y / ahu-2500
id	7254
status	active
price	54.000 € + vat
year of manufacture	2018
location	media? (ro)

chiller / air handling unit / air distribution box altaqua manufactured in 2018.

tehnical description: 

chiller altaqua ac-l850y: cooling capcity: 250 kw, refrigerant: r410a (6500 g x 4), compressor type: panasonic / danfoss, no. of compressors: 4.
air handling unit altaqua ahu-2500: capacity: 250 kw, supply air flow: 40000 m3/h, motor power: 25 kw. 
air distribution box: mounted type: floor standing, no. of holes: 6 (3 x 315 mm, 3 x 400 mm), manual valve control. 
 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.

  DESCRIPTION BRAND ALTAQUA MODEL AC-L850Y / AHU-2500 ID 7254 STATUS ACTIVE PRICE 54.000 € + VAT YEAR OF MANUFACTURE 2018 LOCATION MEDIA? (RO) CHILLER / AIR HANDLING UNIT / AIR DISTRIBUTION BOX ALTAQUA MANUFACTURED IN 2018. TEHNICAL DESCRIPTION: CHILLER ALTAQUA AC-L850Y: COOLING CAPCITY: 250 KW, REFRIGERANT: R410A (6500 G X 4), COMPRESSOR TYPE: PANASONIC / DANFOSS, NO. OF COMPRESSORS: 4. AIR HANDLING UNIT ALTAQUA AHU-2500: CAPACITY: 250 KW, SUPPLY AIR FLOW: 40000 M3/H, MOTOR POWER: 25 KW. AIR DISTRIBUTION BOX: MOUNTED TYPE: FLOOR STANDING, NO. OF HOLES: 6 (3 X 315 MM, 3 X 400 MM), MANUAL VALVE CONTROL. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-automatic cip line simonazzi autosan r4 – refurbished 2018
  
this fully automatic cip line was made by simonazzi in year 2005 and it was totally refurbished in march 2018. all pumps, valves and instruments are thoroughly maintained, plc controls was build totally new with siemens simatic s7 and touch screen operation. equipment is today close to new condition. it has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. in addition, the system has tree additive dozing systems with special acid and alkaline proof dosing pumps and dosing tanks.  
 
manufacturer:	sig simonazzi
manufacturing year:	2005
model:	autosan r4
main tanks:	4 x 6 m3 
serial number:	sas 478
number of circuits:	2 
inverters made by:	danfoss
touch screen:	siemens hmi (new screen) 
control plc:	simantic s 7-300 (new plc) 
video:	abcs://youtu.be/-qscdxxhi24 AUTOMATIC CIP LINE SIMONAZZI AUTOSAN R4 – REFURBISHED 2018 THIS FULLY AUTOMATIC CIP LINE WAS MADE BY SIMONAZZI IN YEAR 2005 AND IT WAS TOTALLY REFURBISHED IN MARCH 2018. ALL PUMPS, VALVES AND INSTRUMENTS ARE THOROUGHLY MAINTAINED, PLC CONTROLS WAS BUILD TOTALLY NEW WITH SIEMENS SIMATIC S7 AND TOUCH SCREEN OPERATION. EQUIPMENT IS TODAY CLOSE TO NEW CONDITION. IT HAS 4 X 6 M3 VERTICAL TANKS, TWO WASHING CIRCUITS, BOTH WITH TUBE TYPE STEAM HEAT EXCHANGERS AND PUMPS FREQUENCY CONTROLLED. IN ADDITION, THE SYSTEM HAS TREE ADDITIVE DOZING SYSTEMS WITH SPECIAL ACID AND ALKALINE PROOF DOSING PUMPS AND DOSING TANKS. MANUFACTURER: SIG SIMONAZZI MANUFACTURING YEAR: 2005 MODEL: AUTOSAN R4 MAIN TANKS: 4 X 6 M3 SERIAL NUMBER: SAS 478 NUMBER OF CIRCUITS: 2 INVERTERS MADE BY: DANFOSS TOUCH SCREEN: SIEMENS HMI (NEW SCREEN) CONTROL PLC: SIMANTIC S 7-300 (NEW PLC) VIDEO: ABCS://YOUTU.BE/-QSCDXXHI24
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 50 €
Ubicación: Land-balancing valve, shut-off valve<br /><br />-1x balancing valve per package<br />-1x shut-off valve per package<br />-connection g1 <br />-max. inlet pressure bar<br />-8x packages available<br />-prize piece<br />-dimensions package 190/130 / h90 mm<br />-weight 1.8 kg BALANCING VALVE, SHUT-OFF VALVE

-1X BALANCING VALVE PER PACKAGE
-1X SHUT-OFF VALVE PER PACKAGE
-CONNECTION G1
-MAX. INLET PRESSURE BAR
-8X PACKAGES AVAILABLE
-PRIZE PIECE
-DIMENSIONS PACKAGE 190/130 / H90 MM
-WEIGHT 1.8 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-grinding diameter 350 mm
grinding length 2050 mm
tip height 190 mm
grinding wheel dimensions 600 x 80 x 203 mm
wheel peripheral speed: 30 m/s
grinding wheel drive 11 kw
feed continuously 0.1 - 4 m / min
workpiece spindle speed rpm 1-168
workpiece weight between centers up to 400 kg
table - swivelling +/-7 â°
total power 19 kw
machine weight approx. 9.6 t
space requirement approx. 6.9 x 2.8 x 2.2 m

part overhaul in 2015:
-overhaul table cylinder, table and bed newly scraped stepless adjustment of the work piece headstock by means of frequency inverters of danfoss
equipped with:
-3 grinding wheel flanges
-3 open bezels
-1 closed bezel
-paper band filter GRINDING DIAMETER 350 MM GRINDING LENGTH 2050 MM TIP HEIGHT 190 MM GRINDING WHEEL DIMENSIONS 600 X 80 X 203 MM WHEEL PERIPHERAL SPEED: 30 M/S GRINDING WHEEL DRIVE 11 KW FEED CONTINUOUSLY 0.1 - 4 M / MIN WORKPIECE SPINDLE SPEED RPM 1-168 WORKPIECE WEIGHT BETWEEN CENTERS UP TO 400 KG TABLE - SWIVELLING +/-7 &ACIRC;&DEG; TOTAL POWER 19 KW MACHINE WEIGHT APPROX. 9.6 T SPACE REQUIREMENT APPROX. 6.9 X 2.8 X 2.2 M PART OVERHAUL IN 2015: -OVERHAUL TABLE CYLINDER, TABLE AND BED NEWLY SCRAPED STEPLESS ADJUSTMENT OF THE WORK PIECE HEADSTOCK BY MEANS OF FREQUENCY INVERTERS OF DANFOSS EQUIPPED WITH: -3 GRINDING WHEEL FLANGES -3 OPEN BEZELS -1 CLOSED BEZEL -PAPER BAND FILTER
Vendedor: CBW Böhmer Werkzeugmaschinen
Año de construcción: usado
Precio: 1.989 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-pizza production line / round pizza 275mm diameter / 1000<br/>  <br/>      manufacturer: rondo, tromp, mondini<br/>      yoc: 2006 and other<br/>      capacity: 1000 pizzas per hour<br/>      product: pizzas (275mm diameter)<br/>      electrical data: 400v - 3ph - 50 hz<br/>      siemens s7-300 controller<br/>      danfoss frequency converter<br/>  <br/>  consist of:<br/>  <br/>  1x vmi bowl lift tipper<br/>  <br/>      type: elevateur<br/>      capacity: 340kg dough incl. bowl<br/>      yoc: 2009<br/>  <br/>  1x rondo pizza line (working width 800mm)<br/>  <br/>      dough extruder including multiroller<br/>      flour shaker (6 pieces)<br/>      infeed conveyor<br/>      hmi touch panel<br/>      satellite head (2 pieces)<br/>      intermediate conveyor<br/>      flour brush<br/>      spiked roller<br/>      bypass conveyor (bypass proofer)<br/>      proofer, about 20 minutes, 5 floors<br/>      includes air conditioning<br/>      exit conveyor<br/>      pneumatic guillotine<br/>      2 rows<br/>      second hmi touch panel<br/>      dough return and cross discharge<br/>      conveyor belt<br/>      pizza alignment unit (2 rows to 1 row)<br/>  <br/>  1x mondini tomato sauce depository (1 row)<br/>  <br/>  1x tromp waterfall cheese spreading systems PIZZA PRODUCTION LINE / ROUND PIZZA 275MM DIAMETER / 1000

MANUFACTURER: RONDO, TROMP, MONDINI
YOC: 2006 AND OTHER
CAPACITY: 1000 PIZZAS PER HOUR
PRODUCT: PIZZAS (275MM DIAMETER)
ELECTRICAL DATA: 400V - 3PH - 50 HZ
SIEMENS S7-300 CONTROLLER
DANFOSS FREQUENCY CONVERTER

CONSIST OF:

1X VMI BOWL LIFT TIPPER

TYPE: ELEVATEUR
CAPACITY: 340KG DOUGH INCL. BOWL
YOC: 2009

1X RONDO PIZZA LINE (WORKING WIDTH 800MM)

DOUGH EXTRUDER INCLUDING MULTIROLLER
FLOUR SHAKER (6 PIECES)
INFEED CONVEYOR
HMI TOUCH PANEL
SATELLITE HEAD (2 PIECES)
INTERMEDIATE CONVEYOR
FLOUR BRUSH
SPIKED ROLLER
BYPASS CONVEYOR (BYPASS PROOFER)
PROOFER, ABOUT 20 MINUTES, 5 FLOORS
INCLUDES AIR CONDITIONING
EXIT CONVEYOR
PNEUMATIC GUILLOTINE
2 ROWS
SECOND HMI TOUCH PANEL
DOUGH RETURN AND CROSS DISCHARGE
CONVEYOR BELT
PIZZA ALIGNMENT UNIT (2 ROWS TO 1 ROW)

1X MONDINI TOMATO SAUCE DEPOSITORY (1 ROW)

1X TROMP WATERFALL CHEESE SPREADING SYSTEMS
Vendedor: Altuntas Bäckereimaschinen GmbH
Año de construcción: usado
Precio: 749 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 113 €
Ubicación: Land-te coop:

danfoss druk druk transmitter mbs 3000 0-16 bar
 TE COOP: DANFOSS DRUK DRUK TRANSMITTER MBS 3000 0-16 BAR
Vendedor: Herr Wim Derikx
Año de construcción: usado
Precio: 899 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 113 €
Ubicación: Land-te coop:

danfoss druk druk transmitter mbs 3000 0-6 bar

TE COOP: DANFOSS DRUK DRUK TRANSMITTER MBS 3000 0-6 BAR
Vendedor: Herr Wim Derikx
Año de construcción: usado
Precio: 750 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-frequency inverters of danfoss

type: hvac-drive vlt6000
power: 5.5 kw
protection class: ip54

frequency converter is fully functional and can be visited at any time.

shipping is also possible! FREQUENCY INVERTERS OF DANFOSS TYPE: HVAC-DRIVE VLT6000 POWER: 5.5 KW PROTECTION CLASS: IP54 FREQUENCY CONVERTER IS FULLY FUNCTIONAL AND CAN BE VISITED AT ANY TIME. SHIPPING IS ALSO POSSIBLE!
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-weight max. in kg: 200 / 140 kg<br/>dimensions: 4200 x 4500 mm<br/>weight: 4500 kg<br/>type of control: elektro-hydraulisch <br/>control: danfoss pvg 32 <br/>basket dimensions: 700 x 1400 mm<br/>work height max.: max. 26000 mm<br/>transport measurements: 6800 x 1950 x 2300 mm<br/>quantity of oil: 80 l<br/>total power requirement: 6 kw<br/>battery: 480 ah<br/>capacity: 12,5 x 8 l/min<br/>climber gorski<br/>load in basket: 200/140 kg<br/>2 persons + payload<br/>working platform floor area: 1 m²<br/>stand height max .: 24,000 mm<br/>range with 200 kg max .: 14,000 mm<br/>turn right / left: approx. 170 °<br/>inspection book and operating instructions available<br/>attention! work batteries are defective!<br/><br/><br/><br/><br/> WEIGHT MAX. IN KG: 200 / 140 KG
DIMENSIONS: 4200 X 4500 MM
WEIGHT: 4500 KG
TYPE OF CONTROL: ELEKTRO-HYDRAULISCH
CONTROL: DANFOSS PVG 32
BASKET DIMENSIONS: 700 X 1400 MM
WORK HEIGHT MAX.: MAX. 26000 MM
TRANSPORT MEASUREMENTS: 6800 X 1950 X 2300 MM
QUANTITY OF OIL: 80 L
TOTAL POWER REQUIREMENT: 6 KW
BATTERY: 480 AH
CAPACITY: 12,5 X 8 L/MIN
CLIMBER GORSKI
LOAD IN BASKET: 200/140 KG
2 PERSONS + PAYLOAD
WORKING PLATFORM FLOOR AREA: 1 M²
STAND HEIGHT MAX .: 24,000 MM
RANGE WITH 200 KG MAX .: 14,000 MM
TURN RIGHT / LEFT: APPROX. 170 °
INSPECTION BOOK AND OPERATING INSTRUCTIONS AVAILABLE
ATTENTION! WORK BATTERIES ARE DEFECTIVE!




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Precio: 47.000 €
Ubicación: Land-list of electronic equipment for glass filling unit, 0.5 liters. 1c.

1. the siemens cpu 414-2xg03-gab0
2. the power supply controller and peripherals – siemens ps407
3. operator panel siemens op17-dp-gav3 617-1jc20-oax1
4. the siematic et200m extension module.
5. frequency drive (main) – danfoss vlt 5000
6. frequency drive (conveyors) – danfoss vlt 2800 – 2 pcs. LIST OF ELECTRONIC EQUIPMENT FOR GLASS FILLING UNIT, 0.5 LITERS. 1C. 1. THE SIEMENS CPU 414-2XG03-GAB0 2. THE POWER SUPPLY CONTROLLER AND PERIPHERALS – SIEMENS PS407 3. OPERATOR PANEL SIEMENS OP17-DP-GAV3 617-1JC20-OAX1 4. THE SIEMATIC ET200M EXTENSION MODULE. 5. FREQUENCY DRIVE (MAIN) – DANFOSS VLT 5000 6. FREQUENCY DRIVE (CONVEYORS) – DANFOSS VLT 2800 – 2 PCS.
Vendedor: Delta IK
Año de construcción: usado
Ubicación: Land-pressure:    160 t<br/>plate thickness:      6 mm<br/>no  of strokes:     70 hub/min<br/>--------------------------------------------------:  <br/>slide:  <br/>- total force (nominal):    160 to<br/>- ram adjustment:     80 mm<br/>- stroke:     60 mm<br/>- stroke rate (min.):     20 /min<br/>- stroke rate (max.):     70 /min<br/>- main drive power:     11 kw<br/>v-ring:  <br/>- nominal force:     40 to<br/>- stroke:     14 mm<br/>counter ram:  <br/>- nominal force:     50 to<br/>- stroke:     10 mm<br/>tool dimensions:  <br/>- lower table - width:    480 mm<br/>- lower table - depth:    520 mm<br/>- upper table - width:    480 mm<br/>- upper table - depth:    520 mm<br/>- shut height max.:    314 mm<br/>- distance between columns (h-frame):    500 mm<br/>- passline opening (free passage in side columns):    220 mm<br/>strip-feeder:  <br/>- feeder type: roll feeder:        <br/>- sheet width max:    210 mm<br/>- sheet thickness max:      6 mm<br/>- feeding step max.:  999.9 mm<br/>- sheet length min:   2000 mm<br/>- nominal force:      6 kn<br/>- band lubrication system: yes:        <br/>- band support rolls: yes:        <br/>electrical specifications:  <br/>- total power consumption:     35 kw<br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   2820 mm<br/>- space requirements -front/back-:   2500 mm<br/>- total height:   2800 mm<br/>- total weight approx.:   9000 kg<br/>attachments -fineblanking press-:  <br/>- closed cabin: yes:        <br/>- decoiler: optional:        <br/>- leveller unit: optional:        <br/>- waste cutter: yes:        <br/>machine completely renewed by feintool in 2004 (nameplate shows year 2004)<br/>+ new pneutronic controller<br/>+ servo feeders<br/>+ danfoss frequency converter for speed variation<br/><br/>fixed punch table<br/><br/>machine is dismantled<br/><br/><br/><br/><br/> PRESSURE: 160 T
PLATE THICKNESS: 6 MM
NO OF STROKES: 70 HUB/MIN
--------------------------------------------------:
SLIDE:
- TOTAL FORCE (NOMINAL): 160 TO
- RAM ADJUSTMENT: 80 MM
- STROKE: 60 MM
- STROKE RATE (MIN.): 20 /MIN
- STROKE RATE (MAX.): 70 /MIN
- MAIN DRIVE POWER: 11 KW
V-RING:
- NOMINAL FORCE: 40 TO
- STROKE: 14 MM
COUNTER RAM:
- NOMINAL FORCE: 50 TO
- STROKE: 10 MM
TOOL DIMENSIONS:
- LOWER TABLE - WIDTH: 480 MM
- LOWER TABLE - DEPTH: 520 MM
- UPPER TABLE - WIDTH: 480 MM
- UPPER TABLE - DEPTH: 520 MM
- SHUT HEIGHT MAX.: 314 MM
- DISTANCE BETWEEN COLUMNS (H-FRAME): 500 MM
- PASSLINE OPENING (FREE PASSAGE IN SIDE COLUMNS): 220 MM
STRIP-FEEDER:
- FEEDER TYPE: ROLL FEEDER:
- SHEET WIDTH MAX: 210 MM
- SHEET THICKNESS MAX: 6 MM
- FEEDING STEP MAX.: 999.9 MM
- SHEET LENGTH MIN: 2000 MM
- NOMINAL FORCE: 6 KN
- BAND LUBRICATION SYSTEM: YES:
- BAND SUPPORT ROLLS: YES:
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 35 KW
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 2820 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 2500 MM
- TOTAL HEIGHT: 2800 MM
- TOTAL WEIGHT APPROX.: 9000 KG
ATTACHMENTS -FINEBLANKING PRESS-:
- CLOSED CABIN: YES:
- DECOILER: OPTIONAL:
- LEVELLER UNIT: OPTIONAL:
- WASTE CUTTER: YES:
MACHINE COMPLETELY RENEWED BY FEINTOOL IN 2004 (NAMEPLATE SHOWS YEAR 2004)
+ NEW PNEUTRONIC CONTROLLER
+ SERVO FEEDERS
+ DANFOSS FREQUENCY CONVERTER FOR SPEED VARIATION

FIXED PUNCH TABLE

MACHINE IS DISMANTLED




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 605 €
Ubicación: Land-te koop:
danfoss 3480-3490 freqentieregelaar vlt.
type: 3003 175h1011.
380-415 v.
 TE KOOP: DANFOSS 3480-3490 FREQENTIEREGELAAR VLT. TYPE: 3003 175H1011. 380-415 V.
Vendedor: Herr Wim Derikx
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 2050 mm<br/>centre height: 190 mm<br/>grinding wheel size: 600 x 80 x 203 mm<br/>grinding wheel peripheral speeds:: 30 m/s<br/>grinding motor: 11 kw<br/>feed stepless: 0,1 - 4 m/min<br/>work piece spindle speed: 1-168 u/min<br/>max. workpiece weight between centres: 400 kg<br/>table - swivable +/-: 7 °<br/>total power requirement: 19 kw<br/>weight of the machine ca.: 9,6 t<br/>dimensions of the machine ca.: 6,9 x 2,8 x 2,2 m<br/>partly overhauled in 2015:<br/>- table cylinder overhauled, table and bed scraped, stepless control of the <br/>workpiece headstock by means of a frequency converter danfoss<br/>equipped with:<br/>- 3 grinding wheel flanges<br/>- 3 open steadies<br/>- 1 closed steady<br/>- paperband filter<br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 2050 MM
CENTRE HEIGHT: 190 MM
GRINDING WHEEL SIZE: 600 X 80 X 203 MM
GRINDING WHEEL PERIPHERAL SPEEDS:: 30 M/S
GRINDING MOTOR: 11 KW
FEED STEPLESS: 0,1 - 4 M/MIN
WORK PIECE SPINDLE SPEED: 1-168 U/MIN
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 400 KG
TABLE - SWIVABLE +/-: 7 °
TOTAL POWER REQUIREMENT: 19 KW
WEIGHT OF THE MACHINE CA.: 9,6 T
DIMENSIONS OF THE MACHINE CA.: 6,9 X 2,8 X 2,2 M
PARTLY OVERHAULED IN 2015:
- TABLE CYLINDER OVERHAULED, TABLE AND BED SCRAPED, STEPLESS CONTROL OF THE
WORKPIECE HEADSTOCK BY MEANS OF A FREQUENCY CONVERTER DANFOSS
EQUIPPED WITH:
- 3 GRINDING WHEEL FLANGES
- 3 OPEN STEADIES
- 1 CLOSED STEADY
- PAPERBAND FILTER




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.499 €
Ubicación: Land-exact model: vlt 6032ht4c20str3dlf00a00c0<br/>  input: 3x380-460v 50/60 hz 44a 40a<br/>  output: 3x0-uin 0-1000 hz 44a 31.6kva<br/>  type: 175z7032<br/>  the photos reflect the current state.<br/>  from the commons resolution, like new condition. EXACT MODEL: VLT 6032HT4C20STR3DLF00A00C0
INPUT: 3X380-460V 50/60 HZ 44A 40A
OUTPUT: 3X0-UIN 0-1000 HZ 44A 31.6KVA
TYPE: 175Z7032
THE PHOTOS REFLECT THE CURRENT STATE.
FROM THE COMMONS RESOLUTION, LIKE NEW CONDITION.
Vendedor: GambTec
Año de construcción: usado
Precio: 33.000 GBP
Ubicación: Land-tray sealer for single cavity pet trays, currently set for trays of the following size: 325mm x 265mm x 60mm depth.

speed 20 to 24 trays per minute.

siemens simatic s7-300 plc and danfoss frequency control.

equipped with witt – gasetechnik, model km-100 3m so mixer for 2 defined gasses.

specially designed for vacuum packing machines in the food industry and for applications where the mixed gas flow fluctuates widely.

this machine was commissioned and test run but then never used as the project was cancelled so it is in an as new condition.

machine size: 3100mm x 1100mm x 2300cm high, approx. weight 2,000 kg (including in-feed system) TRAY SEALER FOR SINGLE CAVITY PET TRAYS, CURRENTLY SET FOR TRAYS OF THE FOLLOWING SIZE: 325MM X 265MM X 60MM DEPTH. SPEED 20 TO 24 TRAYS PER MINUTE. SIEMENS SIMATIC S7-300 PLC AND DANFOSS FREQUENCY CONTROL. EQUIPPED WITH WITT – GASETECHNIK, MODEL KM-100 3M SO MIXER FOR 2 DEFINED GASSES. SPECIALLY DESIGNED FOR VACUUM PACKING MACHINES IN THE FOOD INDUSTRY AND FOR APPLICATIONS WHERE THE MIXED GAS FLOW FLUCTUATES WIDELY. THIS MACHINE WAS COMMISSIONED AND TEST RUN BUT THEN NEVER USED AS THE PROJECT WAS CANCELLED SO IT IS IN AN AS NEW CONDITION. MACHINE SIZE: 3100MM X 1100MM X 2300CM HIGH, APPROX. WEIGHT 2,000 KG (INCLUDING IN-FEED SYSTEM)
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-stock number u2254-1
used stainless steel planetary mixer by herbst (germany) type hr-s150dp. mixer is designed for work on mixing pans with diameter 570 mm x depth about 700 mm and volume about 150 l. mixing pan is not included. mixer has two paddle agitators, each equipped with 6 blades. total length of each agitator is 770 mm. total width of each agitator is 240 mm. mixer is also equipped with teflon wall scrapper with length 550 mm. agitators are driven by electric motor 2.2 kw, 1400 rpm, 230/400v, 50 hz and gearbox. final rotation on agitators up to 176 rpm. adjustable control of rotation thanks to danfoss frequency converter type vlt with parametrs 3.0 kw/400v, in: 3x380-500v 50/60 hz, 6.5/5.7a, out: 3x0-vin 0-1000 hz 7.2/6.3a . mixing device is rised and lowered by hydraulic device driven by 1.1 kw, 1390 rpm, 400 v, 50 hz. maximal rise up to 790 mm from mixing position. mixer is equipped with electric panel and touch screen control panel by siemens. machine is mounted on stainless steel supporting frame, equipped with two supports from the front and two wheels from back. included electric drawings.  STOCK NUMBER U2254-1 USED STAINLESS STEEL PLANETARY MIXER BY HERBST (GERMANY) TYPE HR-S150DP. MIXER IS DESIGNED FOR WORK ON MIXING PANS WITH DIAMETER 570 MM X DEPTH ABOUT 700 MM AND VOLUME ABOUT 150 L. MIXING PAN IS NOT INCLUDED. MIXER HAS TWO PADDLE AGITATORS, EACH EQUIPPED WITH 6 BLADES. TOTAL LENGTH OF EACH AGITATOR IS 770 MM. TOTAL WIDTH OF EACH AGITATOR IS 240 MM. MIXER IS ALSO EQUIPPED WITH TEFLON WALL SCRAPPER WITH LENGTH 550 MM. AGITATORS ARE DRIVEN BY ELECTRIC MOTOR 2.2 KW, 1400 RPM, 230/400V, 50 HZ AND GEARBOX. FINAL ROTATION ON AGITATORS UP TO 176 RPM. ADJUSTABLE CONTROL OF ROTATION THANKS TO DANFOSS FREQUENCY CONVERTER TYPE VLT WITH PARAMETRS 3.0 KW/400V, IN: 3X380-500V 50/60 HZ, 6.5/5.7A, OUT: 3X0-VIN 0-1000 HZ 7.2/6.3A . MIXING DEVICE IS RISED AND LOWERED BY HYDRAULIC DEVICE DRIVEN BY 1.1 KW, 1390 RPM, 400 V, 50 HZ. MAXIMAL RISE UP TO 790 MM FROM MIXING POSITION. MIXER IS EQUIPPED WITH ELECTRIC PANEL AND TOUCH SCREEN CONTROL PANEL BY SIEMENS. MACHINE IS MOUNTED ON STAINLESS STEEL SUPPORTING FRAME, EQUIPPED WITH TWO SUPPORTS FROM THE FRONT AND TWO WHEELS FROM BACK. INCLUDED ELECTRIC DRAWINGS.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Precio: 3.600 €
Ubicación: Land-invertors 
225eur per piece INVERTORS 225EUR PER PIECE
Vendedor: EEC TEX
Año de construcción: usado
Ubicación: Land-grinding length 1000 mm 
grinding diameter 275 mm
centre hight over table         140 mm 
max. weight between centres  125 kg 
grinding wheel diameter    500 mm 
grinding speed                    35 / 50 m/s
capacity                               7,5 kw

general overhaul, modernisation, new assembly in 2013
new electric equipment (siemens) according ce-declaration of conformity 
new painted in ral 5015 and 7035
standard equipment:
• 1 set wedge shoes
• grinding wheel flange with grinding wheel
• balancing stand with mandrel
• open steady
• 1 set of carriers
• 2 centres mk 4
• grinding wheel flange puller
• wheel dresser
• cooling equipment with double magnetic filter, pump
• hydraulic unit
additional devices:
• grinding wheel change equipment on machine bed
• tailstock with pneumatic weight unloading
• dro acu-rite (axis x)
• infinitely variablel workpiece spindle speed control (danfoss)
• dynamic balancing with display (mpm)
• automatic switch off on longitudinal and infeed grinding by siemens plc control GRINDING LENGTH 1000 MM GRINDING DIAMETER 275 MM CENTRE HIGHT OVER TABLE 140 MM MAX. WEIGHT BETWEEN CENTRES 125 KG GRINDING WHEEL DIAMETER 500 MM GRINDING SPEED 35 / 50 M/S CAPACITY 7,5 KW GENERAL OVERHAUL, MODERNISATION, NEW ASSEMBLY IN 2013 NEW ELECTRIC EQUIPMENT (SIEMENS) ACCORDING CE-DECLARATION OF CONFORMITY NEW PAINTED IN RAL 5015 AND 7035 STANDARD EQUIPMENT: • 1 SET WEDGE SHOES • GRINDING WHEEL FLANGE WITH GRINDING WHEEL • BALANCING STAND WITH MANDREL • OPEN STEADY • 1 SET OF CARRIERS • 2 CENTRES MK 4 • GRINDING WHEEL FLANGE PULLER • WHEEL DRESSER • COOLING EQUIPMENT WITH DOUBLE MAGNETIC FILTER, PUMP • HYDRAULIC UNIT ADDITIONAL DEVICES: • GRINDING WHEEL CHANGE EQUIPMENT ON MACHINE BED • TAILSTOCK WITH PNEUMATIC WEIGHT UNLOADING • DRO ACU-RITE (AXIS X) • INFINITELY VARIABLEL WORKPIECE SPINDLE SPEED CONTROL (DANFOSS) • DYNAMIC BALANCING WITH DISPLAY (MPM) • AUTOMATIC SWITCH OFF ON LONGITUDINAL AND INFEED GRINDING BY SIEMENS PLC CONTROL
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Precio: 950 €
Ubicación: Land-soft starter for electric motor large (up to 250 a)  SOFT STARTER FOR ELECTRIC MOTOR LARGE (UP TO 250 A)
Vendedor: Plastic Product Hungary Kft.
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-
gardner denver gas booster

hours: 0
year: 2014
includes danfoss frequency regulator
 GARDNER DENVER GAS BOOSTER HOURS: 0 YEAR: 2014 INCLUDES DANFOSS FREQUENCY REGULATOR
Vendedor: Gas Engine Exchange Ltd
Año de construcción: usado
Ubicación: Land-cooling unit nh3
manufacturer: sabroe/diverse, y.o.c.: 1991, cooling capacity: 3 x 197/171 kw
refrigerant: r717/nh3, operating pressure: hp 18 bar, lp 13 bar, control:s7

consisting of:

3 ammonia compressors
manufacturer: sabroe, type: smc-106c, y.o.c.:1990, cooling capacity: 197/171 kw
6 cylinder, engine speed: 1460/970, operating pressure: 18 bar Ü,
evaporation temperature: -10 °c, condensation temperatrure: 30 °c,
capacity: 330 m³/h, refrigerant: r717 / nh3
motor capacity: 60 kw, engine speed: 1460/970 u/min, type: p250mk4.6,
voltage: 380 v,

3 nh3 pumps
manufacturer: hermetic, type: cam 2/5, capacity: 1-13 m³/h / height: 63-23 m, y.o.c.: 1995
ype of motor: agx 3,0, 3,0 kw, 380 v, 7,5 a, 50 hz, 2720 n-1/min, 0,87 cos (f), nominal pressure: 25 bar,

nh3 centrifugal separator
manufacturer: linde ag, capacity: 5.575 l, 16 bar, y.o.c.: 1972
level indicator: kübler probe afv dn 80 / pn 40; level control: 2 danfoss
solenoid valves evra 20
oil sluice (manufacturer: assmann and stockder, y.o.c.: 1986, capacity: 118 l, 16 bar)

evaporative condenser for ammonia
manufacturer: decsa, type: cfr-c-063, y. o. c.: 2014, capacity: 977 dm³
never used, completely new

equipment is separatly available. COOLING UNIT NH3 MANUFACTURER: SABROE/DIVERSE, Y.O.C.: 1991, COOLING CAPACITY: 3 X 197/171 KW REFRIGERANT: R717/NH3, OPERATING PRESSURE: HP 18 BAR, LP 13 BAR, CONTROL:S7 CONSISTING OF: 3 AMMONIA COMPRESSORS MANUFACTURER: SABROE, TYPE: SMC-106C, Y.O.C.:1990, COOLING CAPACITY: 197/171 KW 6 CYLINDER, ENGINE SPEED: 1460/970, OPERATING PRESSURE: 18 BAR Ü, EVAPORATION TEMPERATURE: -10 °C, CONDENSATION TEMPERATRURE: 30 °C, CAPACITY: 330 M³/H, REFRIGERANT: R717 / NH3 MOTOR CAPACITY: 60 KW, ENGINE SPEED: 1460/970 U/MIN, TYPE: P250MK4.6, VOLTAGE: 380 V, 3 NH3 PUMPS MANUFACTURER: HERMETIC, TYPE: CAM 2/5, CAPACITY: 1-13 M³/H / HEIGHT: 63-23 M, Y.O.C.: 1995 YPE OF MOTOR: AGX 3,0, 3,0 KW, 380 V, 7,5 A, 50 HZ, 2720 N-1/MIN, 0,87 COS (F), NOMINAL PRESSURE: 25 BAR, NH3 CENTRIFUGAL SEPARATOR MANUFACTURER: LINDE AG, CAPACITY: 5.575 L, 16 BAR, Y.O.C.: 1972 LEVEL INDICATOR: KüBLER PROBE AFV DN 80 / PN 40; LEVEL CONTROL: 2 DANFOSS SOLENOID VALVES EVRA 20 OIL SLUICE (MANUFACTURER: ASSMANN AND STOCKDER, Y.O.C.: 1986, CAPACITY: 118 L, 16 BAR) EVAPORATIVE CONDENSER FOR AMMONIA MANUFACTURER: DECSA, TYPE: CFR-C-063, Y. O. C.: 2014, CAPACITY: 977 DM³ NEVER USED, COMPLETELY NEW EQUIPMENT IS SEPARATLY AVAILABLE.
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-thanks to new developments and modifications in the concrete technologies, the company sumab modified a special  mixing plant for producing of a cold asphalt!

cold asphalt mix is now possible with the special cold asphalt mixing plant sumab es-15.

special modified  cold asphalt mixer sumab es-15:

        on a container frame.
        2 aggregate storages x3,5 m3.
        weightning sensors
        pan-mixer 750/500 liters.
        water tank danfoss, 250 liters.
        plc siemens.
        additive pump.
        belt conveyor 2 m
        karcher

we can offer a cold asphalt mixing plants of different capacity from 15 to 80 m3 per hour.

please send us a request for more information. 

+46 703925753
+46 704442537 - available for whatsapp and viber.
web: scand-uk-machines.com. 
abc://sumab.eu/ 
skype: semjons1956



grâce aux nouveautés et modifications apportées aux technologies, la société sumab a modifié une centrale de mélange spécial pour la production d'un enrobe froid!

maintenant, c'est possible de fabriquer de l'enrobé froid avec la machine sumab es-15.


centrale à d'enrobé froid modifiée, spéciale sumab :
        sur un cadre de conteneur.
         capteurs de pesée
         malaxeur 750/500 litres.
         réservoir d'eau danfoss, 250 litres.
         plc siemens.
         pompe additive.
         convoyeur à bande 2 m
         karcher

on peut vous proposer des centrales aux capacités variables, de 15 à 80 m3 par heure.
si vous souhaitez obtenir plus d'informations sur la centrale de fabrication d'enrobé froid sumab es-15, ou vous êtes intéressé par la technologie du mélange d'enrobé froid, on vous invite d'envoyer une demande à notre société.

merci de votre attention !

+46 704442537,
+46 40 306 327.
abc: abc.scand-uk-machines.com



        THANKS TO NEW DEVELOPMENTS AND MODIFICATIONS IN THE CONCRETE TECHNOLOGIES, THE COMPANY SUMAB MODIFIED A SPECIAL MIXING PLANT FOR PRODUCING OF A COLD ASPHALT! COLD ASPHALT MIX IS NOW POSSIBLE WITH THE SPECIAL COLD ASPHALT MIXING PLANT SUMAB ES-15. SPECIAL MODIFIED COLD ASPHALT MIXER SUMAB ES-15: ON A CONTAINER FRAME. 2 AGGREGATE STORAGES X3,5 M3. WEIGHTNING SENSORS PAN-MIXER 750/500 LITERS. WATER TANK DANFOSS, 250 LITERS. PLC SIEMENS. ADDITIVE PUMP. BELT CONVEYOR 2 M KARCHER WE CAN OFFER A COLD ASPHALT MIXING PLANTS OF DIFFERENT CAPACITY FROM 15 TO 80 M3 PER HOUR. PLEASE SEND US A REQUEST FOR MORE INFORMATION. +46 703925753 +46 704442537 - AVAILABLE FOR WHATSAPP AND VIBER. WEB: SCAND-UK-MACHINES.COM. ABC://SUMAB.EU/ SKYPE: SEMJONS1956 GRâCE AUX NOUVEAUTéS ET MODIFICATIONS APPORTéES AUX TECHNOLOGIES, LA SOCIéTé SUMAB A MODIFIé UNE CENTRALE DE MéLANGE SPéCIAL POUR LA PRODUCTION D'UN ENROBE FROID! MAINTENANT, C'EST POSSIBLE DE FABRIQUER DE L'ENROBé FROID AVEC LA MACHINE SUMAB ES-15. CENTRALE à D'ENROBé FROID MODIFIéE, SPéCIALE SUMAB : SUR UN CADRE DE CONTENEUR. CAPTEURS DE PESéE MALAXEUR 750/500 LITRES. RéSERVOIR D'EAU DANFOSS, 250 LITRES. PLC SIEMENS. POMPE ADDITIVE. CONVOYEUR à BANDE 2 M KARCHER ON PEUT VOUS PROPOSER DES CENTRALES AUX CAPACITéS VARIABLES, DE 15 à 80 M3 PAR HEURE. SI VOUS SOUHAITEZ OBTENIR PLUS D'INFORMATIONS SUR LA CENTRALE DE FABRICATION D'ENROBé FROID SUMAB ES-15, OU VOUS êTES INTéRESSé PAR LA TECHNOLOGIE DU MéLANGE D'ENROBé FROID, ON VOUS INVITE D'ENVOYER UNE DEMANDE à NOTRE SOCIéTé. MERCI DE VOTRE ATTENTION ! +46 704442537, +46 40 306 327. ABC: ABC.SCAND-UK-MACHINES.COM
Vendedor: Scandinavian & UK Machines
Año de construcción: usado
Ubicación: Land-sabroe chillpac 104lr

product number:m16-4224
cooling capacity:150 kw
refrigerant:nh3 / r717 / ammonia
refrigerant content:15 kg
voltage:400 volt
dimensions:2900 x 1000 x 2000 mm
weight:2378 kg
year:2010
number in stock:1 piece(s)
price:quotation request


very nice water-cooled ammonia sabroe chiller with a sabroe piston compressor, a 55 kw e-motor, a danfoss frequency converter and a unisab iii controller. mentioned capacity at -4/-8°c (in/out) with ethylene glycol 30% and 50 hz.

please visit also our website: used-refrigeration   SABROE CHILLPAC 104LR PRODUCT NUMBER:M16-4224 COOLING CAPACITY:150 KW REFRIGERANT:NH3 / R717 / AMMONIA REFRIGERANT CONTENT:15 KG VOLTAGE:400 VOLT DIMENSIONS:2900 X 1000 X 2000 MM WEIGHT:2378 KG YEAR:2010 NUMBER IN STOCK:1 PIECE(S) PRICE:QUOTATION REQUEST VERY NICE WATER-COOLED AMMONIA SABROE CHILLER WITH A SABROE PISTON COMPRESSOR, A 55 KW E-MOTOR, A DANFOSS FREQUENCY CONVERTER AND A UNISAB III CONTROLLER. MENTIONED CAPACITY AT -4/-8°C (IN/OUT) WITH ETHYLENE GLYCOL 30% AND 50 HZ. PLEASE VISIT ALSO OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)