203 ofertas

Año de construcción: usado
Precio: 400 €
Ubicación: Land-polydiagnost endognost ls500 cold light source, intensity can be adjusted

sales commercial/dealer to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 


POLYDIAGNOST ENDOGNOST LS500 COLD LIGHT SOURCE, INTENSITY CAN BE ADJUSTED SALES COMMERCIAL/DEALER TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Precio: 349 €
Ubicación: Land-a used revolving bezel for a lathe. 
the lower guide makes it a bit hard to turn (oil / clean)

max flow approx.: 110 mm
passage height approx. mid: 190 mm
base width: 400 mm
hole spacing on the foot approx.: 360 mm
pictures see more mass

a bolt was missing at the bezel. this is an other screw with it which is a bit different-shaped.
the bezel has traces of use. (slight rust, scratches)

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 
 A USED REVOLVING BEZEL FOR A LATHE. THE LOWER GUIDE MAKES IT A BIT HARD TO TURN (OIL / CLEAN) MAX FLOW APPROX.: 110 MM PASSAGE HEIGHT APPROX. MID: 190 MM BASE WIDTH: 400 MM HOLE SPACING ON THE FOOT APPROX.: 360 MM PICTURES SEE MORE MASS A BOLT WAS MISSING AT THE BEZEL. THIS IS AN OTHER SCREW WITH IT WHICH IS A BIT DIFFERENT-SHAPED. THE BEZEL HAS TRACES OF USE. (SLIGHT RUST, SCRATCHES) CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: used machinery auction RESALE 450 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 1100 x 700 x 1900 mm<br/>description: roller diameter approx. 420 mm, cutting height 320 mm, cutting width 400 mm, table size 500 x 500 mm, cutting speed 15 to 150 m/min, saw blade length 3370 mm, with ideal band saw welding unit WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 700 X 1900 MM
DESCRIPTION: ROLLER DIAMETER APPROX. 420 MM, CUTTING HEIGHT 320 MM, CUTTING WIDTH 400 MM, TABLE SIZE 500 X 500 MM, CUTTING SPEED 15 TO 150 M/MIN, SAW BLADE LENGTH 3370 MM, WITH IDEAL BAND SAW WELDING UNIT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-a used hydraulic power pack of manufacturer sig with rexroth control
hydraulic pump, hydraulic tank, steering

type: bh50/43750594

it could, if necessary, applies a wooden psalter naming. be used.

mass approx.:
h / b / t 74 cm / 60 cm / 40 cm

power supply:
380 volts

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 

 A USED HYDRAULIC POWER PACK OF MANUFACTURER SIG WITH REXROTH CONTROL HYDRAULIC PUMP, HYDRAULIC TANK, STEERING TYPE: BH50/43750594 IT COULD, IF NECESSARY, APPLIES A WOODEN PSALTER NAMING. BE USED. MASS APPROX.: H / B / T 74 CM / 60 CM / 40 CM POWER SUPPLY: 380 VOLTS CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-pillar jib crane, hall crane, workstation crane<br /><br />-with cable einhell type bt-eh 1000<br />-year 2015<br />-excavation 2,870 mm<br />-total height 2.745 mm<br />-hook height 1,900 mm<br />-swivel range 360 °<br />-1x pillar jib cranes available<br />-prize piece<br />-transport dimensions 3000/800 / h1200 mm<br />-dead weight 307 kg PILLAR JIB CRANE, HALL CRANE, WORKSTATION CRANE

-WITH CABLE EINHELL TYPE BT-EH 1000
-YEAR 2015
-EXCAVATION 2,870 MM
-TOTAL HEIGHT 2.745 MM
-HOOK HEIGHT 1,900 MM
-SWIVEL RANGE 360 °
-1X PILLAR JIB CRANES AVAILABLE
-PRIZE PIECE
-TRANSPORT DIMENSIONS 3000/800 / H1200 MM
-DEAD WEIGHT 307 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-mixer 40000 famix turbo digi.

pressure-deaeration, blending and carbonation in one compact device.
mint condition.
2 tanks.
siemens s7-300 control. 

performance: 40.000 l / h

blending / mixing ratio:
2 components - water and syrup.
1:2 to 1:8,
electronically adjustable via flow measurement.

beverage temperature: 12°c - 20°c 
 MIXER 40000 FAMIX TURBO DIGI. PRESSURE-DEAERATION, BLENDING AND CARBONATION IN ONE COMPACT DEVICE. MINT CONDITION. 2 TANKS. SIEMENS S7-300 CONTROL. PERFORMANCE: 40.000 L / H BLENDING / MIXING RATIO: 2 COMPONENTS - WATER AND SYRUP. 1:2 TO 1:8, ELECTRONICALLY ADJUSTABLE VIA FLOW MEASUREMENT. BEVERAGE TEMPERATURE: 12°C - 20°C
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Precio: 50 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 349 €
Ubicación: Land-a used very stable roller block / rollers bock for a band saws, cold saws, hacksaw height adjustment by a threaded spindle (left and right)
 
height 70 cm
min. height 60 cm

roller width 45 cm
base 50 x 65 cm

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED VERY STABLE ROLLER BLOCK / ROLLERS BOCK FOR A BAND SAWS, COLD SAWS, HACKSAW HEIGHT ADJUSTMENT BY A THREADED SPINDLE (LEFT AND RIGHT) HEIGHT 70 CM MIN. HEIGHT 60 CM ROLLER WIDTH 45 CM BASE 50 X 65 CM CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 230 €
Ubicación: Land-inside made of stainless steel, outdoor panelled with wood, on wheels.
2-row 9 shelves, a total of 18 sheets 400x600mm.
njpon
dimensions: 880x650x875mm.

the mismatch? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. INSIDE MADE OF STAINLESS STEEL, OUTDOOR PANELLED WITH WOOD, ON WHEELS. 2-ROW 9 SHELVES, A TOTAL OF 18 SHEETS 400X600MM. NJPON DIMENSIONS: 880X650X875MM. THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 450 €
Ubicación: Land-coffee maker by bremer viva xxl, model: 980072
bj: 2000

eqb9a22
dimensions: 360 x 520 x 880
elek. voltage: 220v not suitable? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request.
COFFEE MAKER BY BREMER VIVA XXL, MODEL: 980072 BJ: 2000 EQB9A22 DIMENSIONS: 360 X 520 X 880 ELEK. VOLTAGE: 220V NOT SUITABLE? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 420 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 350 €
Ubicación: Land-combined spout sink:
a) 500x680x1100mm with sensor faucet, control for hot water 490euro.
(c) 500x650x1170mm, 400euro.
(d) 500x700x1000mm, 350euro.

the mismatch? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. COMBINED SPOUT SINK: A) 500X680X1100MM WITH SENSOR FAUCET, CONTROL FOR HOT WATER 490EURO. (C) 500X650X1170MM, 400EURO. (D) 500X700X1000MM, 350EURO. THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-assembly turntable, wing assembly station, wing fitting station, fitting assembly table, window assembly table, tilting table with height adjustment<br /><br />-ideal for vertical and horizontal mounting<br />-two pneumatic tensioners (lowerable)<br />-filzauflage<br />-pneumatically pivoted<br />-mounting height 985 mm<br />-dimensions 2345/1640 / h1030 mm<br />-weight 150 kg ASSEMBLY TURNTABLE, WING ASSEMBLY STATION, WING FITTING STATION, FITTING ASSEMBLY TABLE, WINDOW ASSEMBLY TABLE, TILTING TABLE WITH HEIGHT ADJUSTMENT

-IDEAL FOR VERTICAL AND HORIZONTAL MOUNTING
-TWO PNEUMATIC TENSIONERS (LOWERABLE)
-FILZAUFLAGE
-PNEUMATICALLY PIVOTED
-MOUNTING HEIGHT 985 MM
-DIMENSIONS 2345/1640 / H1030 MM
-WEIGHT 150 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 700 €
Ubicación: Land-download oven by wiesheu as for price, can also used as spare parts!
elek. voltage: 380v

the mismatch? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. DOWNLOAD OVEN BY WIESHEU AS FOR PRICE, CAN ALSO USED AS SPARE PARTS! ELEK. VOLTAGE: 380V THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 4.250 €
Ubicación: Land-vacuum lifter, vacuum lifting device, vacuum suction, plate lifter<br /><br />-2x vacuum surfaces 420 x 820 mm<br />-electrically swiveling to 90 °<br />-vacuum surfaces displaceable 1520 - 2280 mm<br />-height 690 mm<br />-lifting force 300 kg<br />-side channel compressor becker 2,2 kw<br />-unused<br />-dimensions 2000/1500 / h690 mm<br />-dead weight 244 kg VACUUM LIFTER, VACUUM LIFTING DEVICE, VACUUM SUCTION, PLATE LIFTER

-2X VACUUM SURFACES 420 X 820 MM
-ELECTRICALLY SWIVELING TO 90 °
-VACUUM SURFACES DISPLACEABLE 1520 - 2280 MM
-HEIGHT 690 MM
-LIFTING FORCE 300 KG
-SIDE CHANNEL COMPRESSOR BECKER 2,2 KW
-UNUSED
-DIMENSIONS 2000/1500 / H690 MM
-DEAD WEIGHT 244 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-a used three-jaw chuck for lathe turning machine

chuck diameter approx.: 315 mm
forward approximately: 100 mm

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED THREE-JAW CHUCK FOR LATHE TURNING MACHINE CHUCK DIAMETER APPROX.: 315 MM FORWARD APPROXIMATELY: 100 MM CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-new cnc drilling- and dowel inserting machine\r\nbrand: vitap \r\ntype blitz 2\r\n\r\ntechnical data:\r\nhighly efficient and reliable thanks to an easy software.\r\nideal for just in time production or mass production.\r\n\r\nmachine standard equipment:\r\n- drilling head 3.500 rpm\r\n- 3 horizontal indipendent spindles\r\n- 3 vertical indipendent spindles\r\n- 1 glue and dowels inserting unit\r\n- 1 vibrator conveyor\r\n\r\n2 working areas\r\n- 2 sides reference stops (dx,sx) on the working table\r\n- 1 central reference stop on the working table\r\n- 4 clamps\r\n\r\nworking area horizontal head:\r\nx= 1300 mm\r\ny= 50 mm\r\nz= 50mm\r\n\r\ninserting glue and dowel unit:\r\n1 glue and dowel injector.\r\ndowel dimension: min 6x25mm; max 10x40mm\r\n\r\nglue system:\r\n1 glue tank underpressure lt 18\r\n1 water tank for cleaning lt 9\r\n\r\nhardware and software\r\n- monitor lcd tft 19\r\n- pc windows system\r\n- albatros tpa software\r\n- usb port for loading programs run on a station in each office                                                              \r\n\r\nce rules\r\n\r\n\r\noptional:\r\n- medium pressure glue system pump\r\n- bar code reader\r\n- stop 45° NEW CNC DRILLING- AND DOWEL INSERTING MACHINE\R\NBRAND: VITAP \R\NTYPE BLITZ 2\R\N\R\NTECHNICAL DATA:\R\NHIGHLY EFFICIENT AND RELIABLE THANKS TO AN EASY SOFTWARE.\R\NIDEAL FOR JUST IN TIME PRODUCTION OR MASS PRODUCTION.\R\N\R\NMACHINE STANDARD EQUIPMENT:\R\N- DRILLING HEAD 3.500 RPM\R\N- 3 HORIZONTAL INDIPENDENT SPINDLES\R\N- 3 VERTICAL INDIPENDENT SPINDLES\R\N- 1 GLUE AND DOWELS INSERTING UNIT\R\N- 1 VIBRATOR CONVEYOR\R\N\R\N2 WORKING AREAS\R\N- 2 SIDES REFERENCE STOPS (DX,SX) ON THE WORKING TABLE\R\N- 1 CENTRAL REFERENCE STOP ON THE WORKING TABLE\R\N- 4 CLAMPS\R\N\R\NWORKING AREA HORIZONTAL HEAD:\R\NX= 1300 MM\R\NY= 50 MM\R\NZ= 50MM\R\N\R\NINSERTING GLUE AND DOWEL UNIT:\R\N1 GLUE AND DOWEL INJECTOR.\R\NDOWEL DIMENSION: MIN 6X25MM; MAX 10X40MM\R\N\R\NGLUE SYSTEM:\R\N1 GLUE TANK UNDERPRESSURE LT 18\R\N1 WATER TANK FOR CLEANING LT 9\R\N\R\NHARDWARE AND SOFTWARE\R\N- MONITOR LCD TFT 19\R\N- PC WINDOWS SYSTEM\R\N- ALBATROS TPA SOFTWARE\R\N- USB PORT FOR LOADING PROGRAMS RUN ON A STATION IN EACH OFFICE \R\N\R\NCE RULES\R\N\R\N\R\NOPTIONAL:\R\N- MEDIUM PRESSURE GLUE SYSTEM PUMP\R\N- BAR CODE READER\R\N- STOP 45°
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-ref.-no. 00474
designation of 3d water jet machine plant manufacturer flow
model m4-4020b
year 2012
workspace 4000 x 2000 mm dynamic waterjet xd - phases and 3d cuts up to 55 â° without taper - cut 2d and 3d components with tight tolerances at high speeds laser pointer laser unit with a clearly visible red cross to align and positioning
	
flow hochdruckpume 50i-s - 4150 bar / 37kw (50ps) / 3.8 l / min
high pressure pump h50i-s
dynamic waterjet xd
	
cooling system abrasivbehã¤lter flow ultrapierce drilling of glass and stone revisions invested:
x axis spindle 6878 euro servo motors actuator aug made new 2016 5540 euro technical condition good deadline for agreement in the short term
february / march / april 2018
 REF.-NO. 00474 DESIGNATION OF 3D WATER JET MACHINE PLANT MANUFACTURER FLOW MODEL M4-4020B YEAR 2012 WORKSPACE 4000 X 2000 MM DYNAMIC WATERJET XD - PHASES AND 3D CUTS UP TO 55 &ACIRC;&DEG; WITHOUT TAPER - CUT 2D AND 3D COMPONENTS WITH TIGHT TOLERANCES AT HIGH SPEEDS LASER POINTER LASER UNIT WITH A CLEARLY VISIBLE RED CROSS TO ALIGN AND POSITIONING FLOW HOCHDRUCKPUME 50I-S - 4150 BAR / 37KW (50PS) / 3.8 L / MIN HIGH PRESSURE PUMP H50I-S DYNAMIC WATERJET XD COOLING SYSTEM ABRASIVBEH&ATILDE;&CURREN;LTER FLOW ULTRAPIERCE DRILLING OF GLASS AND STONE REVISIONS INVESTED: X AXIS SPINDLE 6878 EURO SERVO MOTORS ACTUATOR AUG MADE NEW 2016 5540 EURO TECHNICAL CONDITION GOOD DEADLINE FOR AGREEMENT IN THE SHORT TERM FEBRUARY / MARCH / APRIL 2018
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 465 mm<br/>turning diameter over slide rest: 224 mm<br/>turning length: 1000 mm<br/>centre height: 230 mm<br/>speeds: 12 / 25 - 2000 u/min<br/>tool adaptor: camlock asa d1-6 <br/>spindle bore: 58 mm<br/>feeds - longitudinal: 42 /  0,031 - 1,7 mm/u<br/>feeds cross: 42 / 0,014 - 0,784 mm/u<br/>workpiece weight max.: 300 kg<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 1,72 t<br/>dimensions of the machine ca.: 2,2 x 1,1 x 1,3 m<br/>electric 400 volt:  <br/>digital readout: 3 achsen <br/>3 jaw chuck: 250 mm<br/>multifix holder with several applications:  <br/>center:  <br/>boring chuck:  <br/>foot brake:  <br/>machinefeets:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 465 MM
TURNING DIAMETER OVER SLIDE REST: 224 MM
TURNING LENGTH: 1000 MM
CENTRE HEIGHT: 230 MM
SPEEDS: 12 / 25 - 2000 U/MIN
TOOL ADAPTOR: CAMLOCK ASA D1-6
SPINDLE BORE: 58 MM
FEEDS - LONGITUDINAL: 42 / 0,031 - 1,7 MM/U
FEEDS CROSS: 42 / 0,014 - 0,784 MM/U
WORKPIECE WEIGHT MAX.: 300 KG
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 1,72 T
DIMENSIONS OF THE MACHINE CA.: 2,2 X 1,1 X 1,3 M
ELECTRIC 400 VOLT:
DIGITAL READOUT: 3 ACHSEN
3 JAW CHUCK: 250 MM
MULTIFIX HOLDER WITH SEVERAL APPLICATIONS:
CENTER:
BORING CHUCK:
FOOT BRAKE:
MACHINEFEETS:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 249 €
Ubicación: Land-a used 2-way hydraulic control of the manufacturer of vickers.
for example: forklift, tractor, unimog, truck, excavator, construction machinery, crane ect.

type number:
02324636
11 md41 p25dt
325770

mass total approx.:
hxwxl
160 mm x 240 mm x 270 mm

this control block was stored at a forklift trucks and construction equipment dealer as a functioning spare parts and comes from a "battle vehicle".

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED 2-WAY HYDRAULIC CONTROL OF THE MANUFACTURER OF VICKERS. FOR EXAMPLE: FORKLIFT, TRACTOR, UNIMOG, TRUCK, EXCAVATOR, CONSTRUCTION MACHINERY, CRANE ECT. TYPE NUMBER: 02324636 11 MD41 P25DT 325770 MASS TOTAL APPROX.: HXWXL 160 MM X 240 MM X 270 MM THIS CONTROL BLOCK WAS STORED AT A FORKLIFT TRUCKS AND CONSTRUCTION EQUIPMENT DEALER AS A FUNCTIONING SPARE PARTS AND COMES FROM A "BATTLE VEHICLE". CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>distance between columns: 1120 mm<br/>stroke: 500 mm<br/>dayligth: 400 mm<br/>ajustment speed: 22 mm/sec<br/>work speed: 5 m/min<br/>total power requirement: 3,2 kw<br/>weight of the machine ca.: 3,5 t<br/>dimensions of the machine ca.: 2,4 x 1,4 x 2,45 m<br/>condition: very good:  <br/>condition: ready for operation:  <br/>electric 380 volt:  <br/>light barrier securety:  <br/>hydraulic-device:  <br/>hydraulic press for bending, punching and compression molding. powerful <br/>hydraulic cylinder with large plunger plate with flutes and two round guides, <br/>lifting operation via lever on the hydraulic unit.<br/>dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> PRESSURE: 150 T
DISTANCE BETWEEN COLUMNS: 1120 MM
STROKE: 500 MM
DAYLIGTH: 400 MM
AJUSTMENT SPEED: 22 MM/SEC
WORK SPEED: 5 M/MIN
TOTAL POWER REQUIREMENT: 3,2 KW
WEIGHT OF THE MACHINE CA.: 3,5 T
DIMENSIONS OF THE MACHINE CA.: 2,4 X 1,4 X 2,45 M
CONDITION: VERY GOOD:
CONDITION: READY FOR OPERATION:
ELECTRIC 380 VOLT:
LIGHT BARRIER SECURETY:
HYDRAULIC-DEVICE:
HYDRAULIC PRESS FOR BENDING, PUNCHING AND COMPRESSION MOLDING. POWERFUL
HYDRAULIC CYLINDER WITH LARGE PLUNGER PLATE WITH FLUTES AND TWO ROUND GUIDES,
LIFTING OPERATION VIA LEVER ON THE HYDRAULIC UNIT.
DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2006 
control unit: ec100 
robot: unirob r10 l 

injection unit: es 2500/...
screw diameter: 70 mm 
injection pressure: 2200 bar 
injection volume: 1100 ccm 
shot capacity: 930 g 

clamping unit: .../390 k sl
clamping force: 390 t 
platen size: 1080 x 1080 mm 
distance between tie bars: 735 x 735 mm 
mould height: 250...660 mm 
opening storke: 700 mm 
max.daylight: 1360 mm 
ejector stroke: 240 mm 
drive power of the hydraulic pump: 55 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 8,05 x 1,9 x 2,04 m 
weight: 23.000 kg 

equipment:
- machine is in a ideal condition and has ca. 12.000 working hours
- machine is equipped with a battenfeld robot
- fast runner machine
- accumulator
- needle valve nozzle
- srew drive by three phase motor
- bimetallic barrels
- 1 x core pull
- 16 x temperature controller for mould hotrunner
- 3 x pneumatic valve MACHINE SPECIFICATION YEAR: 2006 CONTROL UNIT: EC100 ROBOT: UNIROB R10 L INJECTION UNIT: ES 2500/... SCREW DIAMETER: 70 MM INJECTION PRESSURE: 2200 BAR INJECTION VOLUME: 1100 CCM SHOT CAPACITY: 930 G CLAMPING UNIT: .../390 K SL CLAMPING FORCE: 390 T PLATEN SIZE: 1080 X 1080 MM DISTANCE BETWEEN TIE BARS: 735 X 735 MM MOULD HEIGHT: 250...660 MM OPENING STORKE: 700 MM MAX.DAYLIGHT: 1360 MM EJECTOR STROKE: 240 MM DRIVE POWER OF THE HYDRAULIC PUMP: 55 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 8,05 X 1,9 X 2,04 M WEIGHT: 23.000 KG EQUIPMENT: - MACHINE IS IN A IDEAL CONDITION AND HAS CA. 12.000 WORKING HOURS - MACHINE IS EQUIPPED WITH A BATTENFELD ROBOT - FAST RUNNER MACHINE - ACCUMULATOR - NEEDLE VALVE NOZZLE - SREW DRIVE BY THREE PHASE MOTOR - BIMETALLIC BARRELS - 1 X CORE PULL - 16 X TEMPERATURE CONTROLLER FOR MOULD HOTRUNNER - 3 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-pressure: 9 t<br/>chamfer lenght: 1060 mm<br/>distance between columns: 1020 mm<br/>throat: 125 mm<br/>dayligth: 225 mm<br/>work stroke: 32 mm<br/>strokes per minute: 35 <br/>stop adjustment: 250 mm<br/>compressed air consumption each 10 mm stroke way: 1,9 ltr.<br/>weight of the machine ca.: 550 kg<br/>dimensions of the machine ca.: 1,4 x 0,86 x 1,7 m<br/>in fragments: 400-200-100-70-50-40 mm:  <br/>back stop 250 mm way with counter: manuell <br/>stroke depth adjustment:  <br/>two-hand and food triggering:  <br/>diverse tools:  <br/>elektric 220 volt:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> PRESSURE: 9 T
CHAMFER LENGHT: 1060 MM
DISTANCE BETWEEN COLUMNS: 1020 MM
THROAT: 125 MM
DAYLIGTH: 225 MM
WORK STROKE: 32 MM
STROKES PER MINUTE: 35
STOP ADJUSTMENT: 250 MM
COMPRESSED AIR CONSUMPTION EACH 10 MM STROKE WAY: 1,9 LTR.
WEIGHT OF THE MACHINE CA.: 550 KG
DIMENSIONS OF THE MACHINE CA.: 1,4 X 0,86 X 1,7 M
IN FRAGMENTS: 400-200-100-70-50-40 MM:
BACK STOP 250 MM WAY WITH COUNTER: MANUELL
STROKE DEPTH ADJUSTMENT:
TWO-HAND AND FOOD TRIGGERING:
DIVERSE TOOLS:
ELEKTRIC 220 VOLT:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-a used bezel for a lathe

max flow: 140 mm
passage height mid: 200 mm
width of the foot until the middle groove: 210 mm
pictures see more dimensions.

unfortunately lacks a leadership role that but simply built to / can be purchased

the bezel has traces of use. (slight rust, scratches)

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED BEZEL FOR A LATHE MAX FLOW: 140 MM PASSAGE HEIGHT MID: 200 MM WIDTH OF THE FOOT UNTIL THE MIDDLE GROOVE: 210 MM PICTURES SEE MORE DIMENSIONS. UNFORTUNATELY LACKS A LEADERSHIP ROLE THAT BUT SIMPLY BUILT TO / CAN BE PURCHASED THE BEZEL HAS TRACES OF USE. (SLIGHT RUST, SCRATCHES) CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-x-travel: 470 mm<br/>y-travel: 320 mm<br/>z-travel: 400 mm<br/>control: siemens 810 m <br/>speeds: 20 - 4000 u/min<br/>feed: 1 - 2000 mm/min<br/>rapid traverse: 7000 mm/min<br/>total power requirement: 8,5 kw<br/>weight of the machine ca.: 2 t<br/>dimensions of the machine ca.: 1,9 x 2,1 x 2 m<br/>condition: ready for operation:  <br/>condition: very good:  <br/>div. receivings: 7 <br/>cooling unit:  <br/>machinefeets:  <br/>chip pan:  <br/>machine manual:  <br/>machine comes from a training workshop and was only useed for exercises.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> X-TRAVEL: 470 MM
Y-TRAVEL: 320 MM
Z-TRAVEL: 400 MM
CONTROL: SIEMENS 810 M
SPEEDS: 20 - 4000 U/MIN
FEED: 1 - 2000 MM/MIN
RAPID TRAVERSE: 7000 MM/MIN
TOTAL POWER REQUIREMENT: 8,5 KW
WEIGHT OF THE MACHINE CA.: 2 T
DIMENSIONS OF THE MACHINE CA.: 1,9 X 2,1 X 2 M
CONDITION: READY FOR OPERATION:
CONDITION: VERY GOOD:
DIV. RECEIVINGS: 7
COOLING UNIT:
MACHINEFEETS:
CHIP PAN:
MACHINE MANUAL:
MACHINE COMES FROM A TRAINING WORKSHOP AND WAS ONLY USEED FOR EXERCISES.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 119 €
Ubicación: Land-used rack trolleys made of aluminium with 4 swivel castors
12 compartments size of the compartments:
30 x 58 cm

distance of individual disciplines:
10 cm

total mass:
h / b / t
148 cm / 36 cm / 60 cm

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  USED RACK TROLLEYS MADE OF ALUMINIUM WITH 4 SWIVEL CASTORS 12 COMPARTMENTS SIZE OF THE COMPARTMENTS: 30 X 58 CM DISTANCE OF INDIVIDUAL DISCIPLINES: 10 CM TOTAL MASS: H / B / T 148 CM / 36 CM / 60 CM CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-table length: 510 mm<br/>table width: 460 mm<br/>daylight: 420 mm<br/>type: 03939036 <br/>program control: reflex <br/>total power requirement:  kw<br/>weight of the machine ca.: 210 kg<br/>dimensions of the machine ca.: 970 x 930 x 1620 mm<br/>measuring tesa micro hite 3d 454<br/><br/>ideal for measuring in hand operation<br/><br/>measurement range: x 460 y 510 z 420 mm repeatability: 3 µm drive system:manual<br/>body size: 970 × 930 × h 1620 mm 210 kg with probe<br/><br/><br/><br/><br/> TABLE LENGTH: 510 MM
TABLE WIDTH: 460 MM
DAYLIGHT: 420 MM
TYPE: 03939036
PROGRAM CONTROL: REFLEX
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 210 KG
DIMENSIONS OF THE MACHINE CA.: 970 X 930 X 1620 MM
MEASURING TESA MICRO HITE 3D 454

IDEAL FOR MEASURING IN HAND OPERATION

MEASUREMENT RANGE: X 460 Y 510 Z 420 MM REPEATABILITY: 3 µM DRIVE SYSTEM:MANUAL
BODY SIZE: 970 × 930 × H 1620 MM 210 KG WITH PROBE




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Precio: 299 €
Ubicación: Land-forklift 4 control valves hydraulic control block switch valve stacker

used forklift trucks controller cockpit for parts or for the new building.
is located on the component for example: control block (up down to tend abneigen side-shift), different display, switch, hydraulic hoses, hydraulic lines, etc.

the control block is a 4 - way valve

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 

 FORKLIFT 4 CONTROL VALVES HYDRAULIC CONTROL BLOCK SWITCH VALVE STACKER USED FORKLIFT TRUCKS CONTROLLER COCKPIT FOR PARTS OR FOR THE NEW BUILDING. IS LOCATED ON THE COMPONENT FOR EXAMPLE: CONTROL BLOCK (UP DOWN TO TEND ABNEIGEN SIDE-SHIFT), DIFFERENT DISPLAY, SWITCH, HYDRAULIC HOSES, HYDRAULIC LINES, ETC. THE CONTROL BLOCK IS A 4 - WAY VALVE CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 50 mm<br/>throat: 360 mm<br/>bore stroke: 180 mm<br/>speeds: 12  / 42 - 1865 u/min<br/>table-size: 460 x 450 mm<br/>spindle taper: mk 4 <br/>column diameter: 170 mm<br/>thread capacity: m 24 <br/>spindle feeds:: 4 / 0,08 - 0,4 mm/u<br/>table swivelabel +/-: 45 °<br/>distance spindle /table: 600 mm<br/>distance spindle/base plate: 1205 mm<br/>engine output: 2,2 / 2,8 kw<br/>weight of the machine ca.: 800 kg<br/>dimensions of the machine ca.: 0,5 x 0,8 x 2,33 m<br/>electric 380 volt:  <br/>motorized table height adjustment:  <br/>digital readout:  <br/>electromagnetic feed:  <br/>cooling pump in machine base:  <br/>micro feed:  <br/>machinelight:  <br/>heavy geared boring machine with digital display for speed and drilling depth,<br/>hardened gears, thick-walled column, large table and base plate with<br/>t-slots, motorized table adjustment, electromagnetic feed engagement<br/>by means of snaps on the control lever.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 50 MM
THROAT: 360 MM
BORE STROKE: 180 MM
SPEEDS: 12 / 42 - 1865 U/MIN
TABLE-SIZE: 460 X 450 MM
SPINDLE TAPER: MK 4
COLUMN DIAMETER: 170 MM
THREAD CAPACITY: M 24
SPINDLE FEEDS:: 4 / 0,08 - 0,4 MM/U
TABLE SWIVELABEL +/-: 45 °
DISTANCE SPINDLE /TABLE: 600 MM
DISTANCE SPINDLE/BASE PLATE: 1205 MM
ENGINE OUTPUT: 2,2 / 2,8 KW
WEIGHT OF THE MACHINE CA.: 800 KG
DIMENSIONS OF THE MACHINE CA.: 0,5 X 0,8 X 2,33 M
ELECTRIC 380 VOLT:
MOTORIZED TABLE HEIGHT ADJUSTMENT:
DIGITAL READOUT:
ELECTROMAGNETIC FEED:
COOLING PUMP IN MACHINE BASE:
MICRO FEED:
MACHINELIGHT:
HEAVY GEARED BORING MACHINE WITH DIGITAL DISPLAY FOR SPEED AND DRILLING DEPTH,
HARDENED GEARS, THICK-WALLED COLUMN, LARGE TABLE AND BASE PLATE WITH
T-SLOTS, MOTORIZED TABLE ADJUSTMENT, ELECTROMAGNETIC FEED ENGAGEMENT
BY MEANS OF SNAPS ON THE CONTROL LEVER.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-a used electric wet adhesive device.

the device works. two new buttons were installed on the front. start (a + b)
unfortunately, the water container on the page is missing.  



manufacturer: vario taper
type: vt 1500

-desired stripes at your fingertips
-strip length continously variable from 100 mm up to 1500 mm adjustable
-up to 100 mm wide roll
-strip in any length or two preselectable length (a and b)
-strip length a, a-b or a-b-b selectable through integrated repeater system
-donations string between 0 and 24 seconds work time customizable - heating for water tank

the device has traces of use, like quirks, scratches and light wear.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED ELECTRIC WET ADHESIVE DEVICE. THE DEVICE WORKS. TWO NEW BUTTONS WERE INSTALLED ON THE FRONT. START (A + B) UNFORTUNATELY, THE WATER CONTAINER ON THE PAGE IS MISSING. MANUFACTURER: VARIO TAPER TYPE: VT 1500 -DESIRED STRIPES AT YOUR FINGERTIPS -STRIP LENGTH CONTINOUSLY VARIABLE FROM 100 MM UP TO 1500 MM ADJUSTABLE -UP TO 100 MM WIDE ROLL -STRIP IN ANY LENGTH OR TWO PRESELECTABLE LENGTH (A AND B) -STRIP LENGTH A, A-B OR A-B-B SELECTABLE THROUGH INTEGRATED REPEATER SYSTEM -DONATIONS STRING BETWEEN 0 AND 24 SECONDS WORK TIME CUSTOMIZABLE - HEATING FOR WATER TANK THE DEVICE HAS TRACES OF USE, LIKE QUIRKS, SCRATCHES AND LIGHT WEAR. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-description:<br />\nwith siemens s 7 control, 2 aggregates<br />\n<br />\noverhauled in 2014 and was one year in use.<br />\n<br />\nthe machine is adjusted for 0,25l and 0,33 l bottles, but other adjustments are certainly possible. <br />\n<br />\ntransport dimensions with electrical switchboard:  l: 4,3 m / w: 3,8 m / h: 2,5 m /  weight 10 to.<br />\n<br />\n<br />\ncapacity:<br />\n55.000 bph<br />\n<br />\nserial number:<br />\n071-869<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NWITH SIEMENS S 7 CONTROL, 2 AGGREGATES
\N
\NOVERHAULED IN 2014 AND WAS ONE YEAR IN USE.
\N
\NTHE MACHINE IS ADJUSTED FOR 0,25L AND 0,33 L BOTTLES, BUT OTHER ADJUSTMENTS ARE CERTAINLY POSSIBLE.
\N
\NTRANSPORT DIMENSIONS WITH ELECTRICAL SWITCHBOARD: L: 4,3 M / W: 3,8 M / H: 2,5 M / WEIGHT 10 TO.
\N
\N
\NCAPACITY:
\N55.000 BPH
\N
\NSERIAL NUMBER:
\N071-869
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Precio: 229 €
Ubicación: Land-used signode metal belt off roller + signode tensioning tool

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  USED SIGNODE METAL BELT OFF ROLLER + SIGNODE TENSIONING TOOL CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-description:<br />
heat transfer area 79,5 m², operating pressure 34,4 bar, difference test pressure  27,6 bar, volumen side 1/2  110,6 l/109,6 l, operating temperature 150°c, with siemens s7 plc, without beer buffer tank<br />
<br />
<br />
availability:<br />
22.01.2016<br />
<br />
capacity:<br />
ca. 12.500 l/h<br />
<br />
serial number:<br />
73351<br />
<br />
<br />

<br />
besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />
you have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />
or do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />
ask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />
our drink technicians are working worldwide for our customers!<br />
we are looking forward to hearing from you.<br />
<br />
all information is supplied without guarantee. DESCRIPTION:
HEAT TRANSFER AREA 79,5 M², OPERATING PRESSURE 34,4 BAR, DIFFERENCE TEST PRESSURE 27,6 BAR, VOLUMEN SIDE 1/2 110,6 L/109,6 L, OPERATING TEMPERATURE 150°C, WITH SIEMENS S7 PLC, WITHOUT BEER BUFFER TANK


AVAILABILITY:
22.01.2016

CAPACITY:
CA. 12.500 L/H

SERIAL NUMBER:
73351



BESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
YOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
OR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
ASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
OUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
WE ARE LOOKING FORWARD TO HEARING FROM YOU.

ALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Precio: 600 €
Ubicación: Land-pentax pentax ec 3440 video gastroscope, 100cm, incl. transport case

sales commercial/dealer to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 
PENTAX PENTAX EC 3440 VIDEO GASTROSCOPE, 100CM, INCL. TRANSPORT CASE SALES COMMERCIAL/DEALER TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Ubicación: Land-pressure: 25 t<br/>punching cross-cut in cmm: , <br/>stroke: 18 mm<br/>no. of strokes: 70 hub/min<br/>throat: 185 mm<br/>dayligth: 189 mm<br/>puncher perforates 16 mm diameter in: 12 mm<br/>puncher perforates 27 mm diameter in: 7 mm<br/>drive: 1 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 300 kg<br/>dimensions of the machine ca.: 805 x 500 x 1500 mm<br/>electric 380 volt:  <br/>base:  <br/>punches and dies: ca. 35 <br/>food activate:  <br/>made of operating workshop, all achievement data refer to a material strength <br/>of 400 n/mm ².<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> PRESSURE: 25 T
PUNCHING CROSS-CUT IN CMM: ,
STROKE: 18 MM
NO. OF STROKES: 70 HUB/MIN
THROAT: 185 MM
DAYLIGTH: 189 MM
PUNCHER PERFORATES 16 MM DIAMETER IN: 12 MM
PUNCHER PERFORATES 27 MM DIAMETER IN: 7 MM
DRIVE: 1 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 300 KG
DIMENSIONS OF THE MACHINE CA.: 805 X 500 X 1500 MM
ELECTRIC 380 VOLT:
BASE:
PUNCHES AND DIES: CA. 35
FOOD ACTIVATE:
MADE OF OPERATING WORKSHOP, ALL ACHIEVEMENT DATA REFER TO A MATERIAL STRENGTH
OF 400 N/MM ².
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 600 €
Ubicación: Land-pentax ec 2901 video gastroscope in transport case

sales commercial/dealer to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 
shipping free within germany. cost of overseas shipping on request. PENTAX EC 2901 VIDEO GASTROSCOPE IN TRANSPORT CASE SALES COMMERCIAL/DEALER TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE! SHIPPING FREE WITHIN GERMANY. COST OF OVERSEAS SHIPPING ON REQUEST.
Vendedor: P&U Medizintechnik
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 325 mm<br/>turning diameter over slide rest: 190 mm<br/>turning length: 1000 mm<br/>speeds: 85 - 2000 u/min<br/>spindle bore: 32 mm<br/>centre height: 165 mm<br/>bed width: 200 mm<br/>spindle taper: din 55027 <br/>feeds: 48 <br/>feeds - longitudinal: 0,006 - 1,77 mm/u<br/>feeds - cross: 0,003 - 0,885 mm/u<br/>metric threading: 48 / 0,1 - 28 mm<br/>taper in tailstock mt: 3 <br/>quill stroke: 95 mm<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 770 kg<br/>dimensions of the machine ca.:  m<br/>electric 380 volt:  <br/>digital readout  2 axis: newall dp 700 <br/>fixed steady: 10 - 70 mm <br/>following steady: 10 - 70 mm <br/>foot brake:  <br/>machinelight:  <br/>3 jaw chuck: bison 160 mm <br/>faceplate: 250 mm <br/>tool holder system multifix:  <br/>bed stop for slide:  <br/>rear chip protect:  <br/>chuck protection:  <br/>faceplate: 296 mm <br/>unused exhibition machine with a lot of accessories.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 325 MM
TURNING DIAMETER OVER SLIDE REST: 190 MM
TURNING LENGTH: 1000 MM
SPEEDS: 85 - 2000 U/MIN
SPINDLE BORE: 32 MM
CENTRE HEIGHT: 165 MM
BED WIDTH: 200 MM
SPINDLE TAPER: DIN 55027
FEEDS: 48
FEEDS - LONGITUDINAL: 0,006 - 1,77 MM/U
FEEDS - CROSS: 0,003 - 0,885 MM/U
METRIC THREADING: 48 / 0,1 - 28 MM
TAPER IN TAILSTOCK MT: 3
QUILL STROKE: 95 MM
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 770 KG
DIMENSIONS OF THE MACHINE CA.: M
ELECTRIC 380 VOLT:
DIGITAL READOUT 2 AXIS: NEWALL DP 700
FIXED STEADY: 10 - 70 MM
FOLLOWING STEADY: 10 - 70 MM
FOOT BRAKE:
MACHINELIGHT:
3 JAW CHUCK: BISON 160 MM
FACEPLATE: 250 MM
TOOL HOLDER SYSTEM MULTIFIX:
BED STOP FOR SLIDE:
REAR CHIP PROTECT:
CHUCK PROTECTION:
FACEPLATE: 296 MM
UNUSED EXHIBITION MACHINE WITH A LOT OF ACCESSORIES.
MACHINE DEALER WITH OWN STOCK OF 2500 M².





Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-mixer for carbonized beverages for sale. mint condition.

famix turbo digi

capacity: 12.000 l/h
blending: 1:2 to 1:8
beverage temperature:
co²-controller: yes, customizable
brix-controller: yes, customizable
pumps: 4 - vacuum, carbonator, dosing, hi-pressure

other:
2 tanks.
5 components - water + sugar syrup + precursor + acid + essence.
entirely made of stainless steel.

supplies: 
cip, vacuum deaeration,degassing 
 MIXER FOR CARBONIZED BEVERAGES FOR SALE. MINT CONDITION. FAMIX TURBO DIGI CAPACITY: 12.000 L/H BLENDING: 1:2 TO 1:8 BEVERAGE TEMPERATURE: CO²-CONTROLLER: YES, CUSTOMIZABLE BRIX-CONTROLLER: YES, CUSTOMIZABLE PUMPS: 4 - VACUUM, CARBONATOR, DOSING, HI-PRESSURE OTHER: 2 TANKS. 5 COMPONENTS - WATER + SUGAR SYRUP + PRECURSOR + ACID + ESSENCE. ENTIRELY MADE OF STAINLESS STEEL. SUPPLIES: CIP, VACUUM DEAERATION,DEGASSING
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Ubicación: Land-pressure: 30 t<br/>stroke: 200 mm<br/>table surface area:  mm<br/>pressure: max. 400 bar<br/>column daylight: 500 mm<br/>dayligth: 720 mm<br/>column travel -side: 200 mm<br/>weight of the machine ca.: 280 kg<br/>dimensions of the machine ca.: 700 x 365 x 1475 mm<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> PRESSURE: 30 T
STROKE: 200 MM
TABLE SURFACE AREA: MM
PRESSURE: MAX. 400 BAR
COLUMN DAYLIGHT: 500 MM
DAYLIGTH: 720 MM
COLUMN TRAVEL -SIDE: 200 MM
WEIGHT OF THE MACHINE CA.: 280 KG
DIMENSIONS OF THE MACHINE CA.: 700 X 365 X 1475 MM
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 85 €
Ubicación: Land-a hole pipe cutting diameter 60 mm for e.g. leather pvc seals rubber cardboard paper textile wood plastic alu / soft metal ect.
the hole pipe is in used condition and has been used to punch of foam; see pictures.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A HOLE PIPE CUTTING DIAMETER 60 MM FOR E.G. LEATHER PVC SEALS RUBBER CARDBOARD PAPER TEXTILE WOOD PLASTIC ALU / SOFT METAL ECT. THE HOLE PIPE IS IN USED CONDITION AND HAS BEEN USED TO PUNCH OF FOAM; SEE PICTURES. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure: 20 t<br/>stroke: 180 mm<br/>table surface area:  mm<br/>pressure: max. 400 bar<br/>column daylight: 500 mm<br/>dayligth: 585 mm<br/>column travel -side: 195 mm<br/>weight of the machine ca.: 220 kg<br/>dimensions of the machine ca.: 700 x 365 x 1455 mm<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> PRESSURE: 20 T
STROKE: 180 MM
TABLE SURFACE AREA: MM
PRESSURE: MAX. 400 BAR
COLUMN DAYLIGHT: 500 MM
DAYLIGTH: 585 MM
COLUMN TRAVEL -SIDE: 195 MM
WEIGHT OF THE MACHINE CA.: 220 KG
DIMENSIONS OF THE MACHINE CA.: 700 X 365 X 1455 MM
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 29 €
Ubicación: Land-europrop 20-350 eco, galv., new
low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

reliability in many applications due to high load capacity up to 36.7 kn

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch

certificated en 1965, produced in europe.

 EUROPROP 20-350 ECO, GALV., NEW LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION RELIABILITY IN MANY APPLICATIONS DUE TO HIGH LOAD CAPACITY UP TO 36.7 KN OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH CERTIFICATED EN 1965, PRODUCED IN EUROPE.
Vendedor: Berger International
Año de construcción: usado
Ubicación: Land-grinding diameter: 200 mm<br/>grinding length: 630 mm<br/>centre height: 110 mm<br/>grinding diameter economically: 140 mm<br/>swing dia.: 210 mm<br/>workpiece weight max.: 40 kg<br/>dimensions of grinding wheel: 400 x 40 x 127 mm<br/>grinding wheel speeds: 1650/2050 u/min<br/>workpiece turning speeds: 36 -  420 u/min<br/>table speed -stepless-: 0,1 - 6 m/min<br/>independent disposition at table stroke:  mm<br/>power capacity - grinding spindle: 3,5 kw<br/>power capacity - workpiece spindle: 0,8 kw<br/>driving capacity - oil pump motor: 1,6 kw<br/>power capacity - cooling pump: 0,1 kw<br/>weight of the machine ca.: 3,7 t<br/>dimensions of the machine ca.: 3,6 x 1,5 x 1,4 m<br/>electric 380 volt: gesamtleistung 10,3  kw<br/>cooling equipment:  <br/>internal cylindr.grinding device:  <br/>resessing feed hydr.:  <br/>machinelight:  <br/>draw-off device: am reitstock <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> GRINDING DIAMETER: 200 MM
GRINDING LENGTH: 630 MM
CENTRE HEIGHT: 110 MM
GRINDING DIAMETER ECONOMICALLY: 140 MM
SWING DIA.: 210 MM
WORKPIECE WEIGHT MAX.: 40 KG
DIMENSIONS OF GRINDING WHEEL: 400 X 40 X 127 MM
GRINDING WHEEL SPEEDS: 1650/2050 U/MIN
WORKPIECE TURNING SPEEDS: 36 - 420 U/MIN
TABLE SPEED -STEPLESS-: 0,1 - 6 M/MIN
INDEPENDENT DISPOSITION AT TABLE STROKE: MM
POWER CAPACITY - GRINDING SPINDLE: 3,5 KW
POWER CAPACITY - WORKPIECE SPINDLE: 0,8 KW
DRIVING CAPACITY - OIL PUMP MOTOR: 1,6 KW
POWER CAPACITY - COOLING PUMP: 0,1 KW
WEIGHT OF THE MACHINE CA.: 3,7 T
DIMENSIONS OF THE MACHINE CA.: 3,6 X 1,5 X 1,4 M
ELECTRIC 380 VOLT: GESAMTLEISTUNG 10,3 KW
COOLING EQUIPMENT:
INTERNAL CYLINDR.GRINDING DEVICE:
RESESSING FEED HYDR.:
MACHINELIGHT:
DRAW-OFF DEVICE: AM REITSTOCK
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 27 €
Ubicación: Land-europrop 20-300, galv., new
low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

reliability in many applications due to high load capacity up to 36.7 kn

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch

certificated en 1965, produced in europe.

 EUROPROP 20-300, GALV., NEW LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION RELIABILITY IN MANY APPLICATIONS DUE TO HIGH LOAD CAPACITY UP TO 36.7 KN OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH CERTIFICATED EN 1965, PRODUCED IN EUROPE.
Vendedor: Berger International
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>throat: 330 mm<br/>bore stroke: 190 mm<br/>spindle turning speed range: 8 / 90 - 1500 u/min<br/>table-size: 500 x 400 mm<br/>spindle taper: mk 4 <br/>column diameter: 140 mm<br/>spindle feeds:: 3 / 0,1 - 0,33 mm/u<br/>distance spindle /table: 820 mm<br/>distance spindle/base plate: 1210 mm<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 310 kg<br/>dimensions of the machine ca.: 0,5 x 0,75 x 2,05 m<br/>electric 400 volt:  <br/>protection made in plastic:  <br/>geared boring machine.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
THROAT: 330 MM
BORE STROKE: 190 MM
SPINDLE TURNING SPEED RANGE: 8 / 90 - 1500 U/MIN
TABLE-SIZE: 500 X 400 MM
SPINDLE TAPER: MK 4
COLUMN DIAMETER: 140 MM
SPINDLE FEEDS:: 3 / 0,1 - 0,33 MM/U
DISTANCE SPINDLE /TABLE: 820 MM
DISTANCE SPINDLE/BASE PLATE: 1210 MM
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 310 KG
DIMENSIONS OF THE MACHINE CA.: 0,5 X 0,75 X 2,05 M
ELECTRIC 400 VOLT:
PROTECTION MADE IN PLASTIC:
GEARED BORING MACHINE.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-2008 heidelberg eurobind 1300 eva perfect binder
serial number deao-000043
eurotecnica postpress europack pre melt unit
type pm g78488
serial number g0804-209
4 clamps
dust extraction bag
operating hours 3280
book count 594297
mechanical speed: 1300 cycles/hour
book block format (height x width x thickness): max. 360mm x 300mm x 45mm 
 min. 145mm x 120mm x 2mm 
paper grammage (min.-max.): 60 gr/m2 - 170 gr/m2
cover format (height x width): max. 370mm x 680mm min. 145mm x 242mm 
cover grammage (min.-max.): 120 gr/m2 - 300 gr/m2
no compressor supplied. was run from main air system
machine in excellent condition.

 2008 HEIDELBERG EUROBIND 1300 EVA PERFECT BINDER SERIAL NUMBER DEAO-000043 EUROTECNICA POSTPRESS EUROPACK PRE MELT UNIT TYPE PM G78488 SERIAL NUMBER G0804-209 4 CLAMPS DUST EXTRACTION BAG OPERATING HOURS 3280 BOOK COUNT 594297 MECHANICAL SPEED: 1300 CYCLES/HOUR BOOK BLOCK FORMAT (HEIGHT X WIDTH X THICKNESS): MAX. 360MM X 300MM X 45MM MIN. 145MM X 120MM X 2MM PAPER GRAMMAGE (MIN.-MAX.): 60 GR/M2 - 170 GR/M2 COVER FORMAT (HEIGHT X WIDTH): MAX. 370MM X 680MM MIN. 145MM X 242MM COVER GRAMMAGE (MIN.-MAX.): 120 GR/M2 - 300 GR/M2 NO COMPRESSOR SUPPLIED. WAS RUN FROM MAIN AIR SYSTEM MACHINE IN EXCELLENT CONDITION.
Vendedor: I.E.S. (Scotland) Limited
Año de construcción: usado
Ubicación: Land-pressure: 50 t<br/>chamfer lenght: 2050 mm<br/>distance between columns: 1550 mm<br/>throat: 255 mm<br/>stroke: 165 mm<br/>work height max.: 960 mm<br/>ajustment speed: 90 mm/sec<br/>working feed: 6 mm/sec<br/>return speed: 70 mm/sec<br/>control: cybelec dnc 90 color 3-d <br/>dayligth: 360 mm<br/>back stop - adjustable: 500 mm<br/>quantity of oil: 85 l<br/>drive: 9 kw<br/>weight: ca. 6 t<br/>dimensions of the machine ca.: 2,3 x 1,7 x 2,4 m<br/>electric 380 volt:  <br/>back gauge axis: x + r - vertikal <br/>crowning system: mot. <br/>hydr. upper tool clamping:  <br/>stops of rear register: 4 <br/>support arms front traversable: 2 <br/>machine manual:  <br/>diverse tools:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> PRESSURE: 50 T
CHAMFER LENGHT: 2050 MM
DISTANCE BETWEEN COLUMNS: 1550 MM
THROAT: 255 MM
STROKE: 165 MM
WORK HEIGHT MAX.: 960 MM
AJUSTMENT SPEED: 90 MM/SEC
WORKING FEED: 6 MM/SEC
RETURN SPEED: 70 MM/SEC
CONTROL: CYBELEC DNC 90 COLOR 3-D
DAYLIGTH: 360 MM
BACK STOP - ADJUSTABLE: 500 MM
QUANTITY OF OIL: 85 L
DRIVE: 9 KW
WEIGHT: CA. 6 T
DIMENSIONS OF THE MACHINE CA.: 2,3 X 1,7 X 2,4 M
ELECTRIC 380 VOLT:
BACK GAUGE AXIS: X + R - VERTIKAL
CROWNING SYSTEM: MOT.
HYDR. UPPER TOOL CLAMPING:
STOPS OF REAR REGISTER: 4
SUPPORT ARMS FRONT TRAVERSABLE: 2
MACHINE MANUAL:
DIVERSE TOOLS:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DEA types: