1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-injection molding machine
manufacturer: boy
type: 80 t2
year of construction: 1990

more data, please refer to the attached data sheet in the appendix.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  INJECTION MOLDING MACHINE MANUFACTURER: BOY TYPE: 80 T2 YEAR OF CONSTRUCTION: 1990 MORE DATA, PLEASE REFER TO THE ATTACHED DATA SHEET IN THE APPENDIX. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-sheet width: 2050 mm<br/>plate thickness: 3 mm<br/>strokes per minute until: 35 <br/>cutting angle: 2,0 °<br/>table height over floor: 870 mm<br/>thickness at niro-steel: 2 mm<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 1550 kg<br/>range l-w-h: 2,5 x 0,67 x 1,23 m<br/>electric 380 volt:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SHEET WIDTH: 2050 MM
PLATE THICKNESS: 3 MM
STROKES PER MINUTE UNTIL: 35
CUTTING ANGLE: 2,0 °
TABLE HEIGHT OVER FLOOR: 870 MM
THICKNESS AT NIRO-STEEL: 2 MM
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 1550 KG
RANGE L-W-H: 2,5 X 0,67 X 1,23 M
ELECTRIC 380 VOLT:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine
manufacturer: arburg
type: 370m 1000-350
year of construction: 1995

more data, please refer to the attached data sheet.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  INJECTION MOLDING MACHINE MANUFACTURER: ARBURG TYPE: 370M 1000-350 YEAR OF CONSTRUCTION: 1995 MORE DATA, PLEASE REFER TO THE ATTACHED DATA SHEET. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 500 mm<br/>turning diameter over slide rest: 300 mm<br/>turning length: 3000 mm<br/>turning dia. in gap: 670 mm<br/>spindle bore: 72 mm<br/>turning speeds: 11 - 2000 u/min<br/>spindle head: grösse 8 <br/>total power requirement: 10 kw<br/>weight of the machine ca.: 4,1 t<br/>dimensions of the machine ca.: 4,6 x 1,1 x 1,3 m<br/>tool-holder ideal with 4 set, lynette 280 mm, cooling unit.<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 500 MM
TURNING DIAMETER OVER SLIDE REST: 300 MM
TURNING LENGTH: 3000 MM
TURNING DIA. IN GAP: 670 MM
SPINDLE BORE: 72 MM
TURNING SPEEDS: 11 - 2000 U/MIN
SPINDLE HEAD: GRöSSE 8
TOTAL POWER REQUIREMENT: 10 KW
WEIGHT OF THE MACHINE CA.: 4,1 T
DIMENSIONS OF THE MACHINE CA.: 4,6 X 1,1 X 1,3 M
TOOL-HOLDER IDEAL WITH 4 SET, LYNETTE 280 MM, COOLING UNIT.




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-
ges. kant length: 2000 mm
drucklstg.: 63 to.
total power consumption: 6.3 kw / 400 v
machine weight: 4000 kg

equipment / accessories:

electr. adjustable backgauge
security shield
material support arms
height adjustable machine fixators
div. segment missions to the edges
various tools

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
every interested party can advance test in our factory under power the press brake.
 GES. KANT LENGTH: 2000 MM DRUCKLSTG.: 63 TO. TOTAL POWER CONSUMPTION: 6.3 KW / 400 V MACHINE WEIGHT: 4000 KG EQUIPMENT / ACCESSORIES: ELECTR. ADJUSTABLE BACKGAUGE SECURITY SHIELD MATERIAL SUPPORT ARMS HEIGHT ADJUSTABLE MACHINE FIXATORS DIV. SEGMENT MISSIONS TO THE EDGES VARIOUS TOOLS ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EVERY INTERESTED PARTY CAN ADVANCE TEST IN OUR FACTORY UNDER POWER THE PRESS BRAKE.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-x-travel: 400 mm<br/>y-travel: 254 mm<br/>workpiece height: 250 mm<br/>table-size: 650 x 300 mm<br/>vertical movement: 340 mm<br/>passage: lkb: 505 / lks: 370 mm<br/>planetary speed: 40-500 u/min<br/>spindle throat: lkb: 270 / lks 300 mm<br/>spindle stroke: lkb: 100 / lks: 5 - 75 mm<br/>speeds infinitely variable: lks: 15.000-60.000 u/min.<br/>speeds: lkb: 40 - 3.150 u/min<br/>tool taper: sk 40 <br/>feeds: 1-2-4 und 3-6-12 mm/wu<br/>min./max. hole to grind: 0,8-125 mm<br/>drive: 2 kw<br/>weight of the machine ca.: 1,15 t<br/>dimensions of the machine ca.: 1,5 x 1,5 x 1,9 m<br/>condition: very good:  <br/>electric 380 volt:  <br/>seperate control cabinet: 2 x lkb/lks <br/>2 axis digital readout: heidenhain <br/>diverse accessories: 2 werkzeugschränke <br/>miller ( diverse ):  <br/>tool receiving divers:  <br/>coordinate grinding and drilling machine = combined machine<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> X-TRAVEL: 400 MM
Y-TRAVEL: 254 MM
WORKPIECE HEIGHT: 250 MM
TABLE-SIZE: 650 X 300 MM
VERTICAL MOVEMENT: 340 MM
PASSAGE: LKB: 505 / LKS: 370 MM
PLANETARY SPEED: 40-500 U/MIN
SPINDLE THROAT: LKB: 270 / LKS 300 MM
SPINDLE STROKE: LKB: 100 / LKS: 5 - 75 MM
SPEEDS INFINITELY VARIABLE: LKS: 15.000-60.000 U/MIN.
SPEEDS: LKB: 40 - 3.150 U/MIN
TOOL TAPER: SK 40
FEEDS: 1-2-4 UND 3-6-12 MM/WU
MIN./MAX. HOLE TO GRIND: 0,8-125 MM
DRIVE: 2 KW
WEIGHT OF THE MACHINE CA.: 1,15 T
DIMENSIONS OF THE MACHINE CA.: 1,5 X 1,5 X 1,9 M
CONDITION: VERY GOOD:
ELECTRIC 380 VOLT:
SEPERATE CONTROL CABINET: 2 X LKB/LKS
2 AXIS DIGITAL READOUT: HEIDENHAIN
DIVERSE ACCESSORIES: 2 WERKZEUGSCHRäNKE
MILLER ( DIVERSE ):
TOOL RECEIVING DIVERS:
COORDINATE GRINDING AND DRILLING MACHINE = COMBINED MACHINE
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-vacuum dryer eberl et 16/60 

year of constr. 2006, absolutely as new! 
working hours: heating 1.400 hours, vacuum pump 2.400 hours 
the ideal dryer for drying and post-drying of each wood species in excellent quality. 
the full plant is made in stainless steel and running with electric heating. 

the vacuum dryer is complete ready for use, with electrical heating, inside wagon and loading tracks / slidings. 

inside dimensions: 
diameter of the vessel: 1,6 m 
stacking-length: 6,1 m 
stacking-width: 1,0 m 
stacking-height: 1,23 m 
stacking scope gross: 7,5 m³ 
weight 4 tons 

outside dimensions / transport dimensions: 
total length: 8,7 m 
total width: 1,90 m 
total height: 2,1 m 

electrical power: 16 kwt 
average power consumption 4,5 kwt/h 

vacuum pump busch mm 1142av aqua 
sps control system siemens simatic touch 6es7314-6cf02 
ventilator 2-step
2 pieces electrical heaters each 4 kw 
6 pieces of stick-in-electrodes 
1 water spray nozzle 
domestic waterworks grundfos jp5 
pressure sensore 
air moisture sensor 

all technical data due to manufacturer and manual. 

price ex location in germany – rheinland-pfalz
loading and transport on request. 

used machines without guarantee. 

 VACUUM DRYER EBERL ET 16/60 YEAR OF CONSTR. 2006, ABSOLUTELY AS NEW! WORKING HOURS: HEATING 1.400 HOURS, VACUUM PUMP 2.400 HOURS THE IDEAL DRYER FOR DRYING AND POST-DRYING OF EACH WOOD SPECIES IN EXCELLENT QUALITY. THE FULL PLANT IS MADE IN STAINLESS STEEL AND RUNNING WITH ELECTRIC HEATING. THE VACUUM DRYER IS COMPLETE READY FOR USE, WITH ELECTRICAL HEATING, INSIDE WAGON AND LOADING TRACKS / SLIDINGS. INSIDE DIMENSIONS: DIAMETER OF THE VESSEL: 1,6 M STACKING-LENGTH: 6,1 M STACKING-WIDTH: 1,0 M STACKING-HEIGHT: 1,23 M STACKING SCOPE GROSS: 7,5 M³ WEIGHT 4 TONS OUTSIDE DIMENSIONS / TRANSPORT DIMENSIONS: TOTAL LENGTH: 8,7 M TOTAL WIDTH: 1,90 M TOTAL HEIGHT: 2,1 M ELECTRICAL POWER: 16 KWT AVERAGE POWER CONSUMPTION 4,5 KWT/H VACUUM PUMP BUSCH MM 1142AV AQUA SPS CONTROL SYSTEM SIEMENS SIMATIC TOUCH 6ES7314-6CF02 VENTILATOR 2-STEP 2 PIECES ELECTRICAL HEATERS EACH 4 KW 6 PIECES OF STICK-IN-ELECTRODES 1 WATER SPRAY NOZZLE DOMESTIC WATERWORKS GRUNDFOS JP5 PRESSURE SENSORE AIR MOISTURE SENSOR ALL TECHNICAL DATA DUE TO MANUFACTURER AND MANUAL. PRICE EX LOCATION IN GERMANY – RHEINLAND-PFALZ LOADING AND TRANSPORT ON REQUEST. USED MACHINES WITHOUT GUARANTEE.
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 520 mm<br/>turning diameter over slide rest: 310 mm<br/>turning length: 1000 mm<br/>swing in gap: 580 mm<br/>centre height: 250 mm<br/>bed width: 410 mm<br/>spindle bore: 62 mm<br/>spindle flange: camlock gr. 8 <br/>spindle turning speed range: 24: 9 - 1800 u/min<br/>drive: 15 kw<br/>weight of the machine ca.: 2,75 t<br/>dimensions of the machine ca.: 2,8 x 1,3 x 1,3 m<br/>electric 380 volt:  <br/>chuck: 300 mm<br/>cooling equipment:  <br/>following centers:  <br/>rapid transfer-steel holder  multifix :  <br/>german quality product<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 520 MM
TURNING DIAMETER OVER SLIDE REST: 310 MM
TURNING LENGTH: 1000 MM
SWING IN GAP: 580 MM
CENTRE HEIGHT: 250 MM
BED WIDTH: 410 MM
SPINDLE BORE: 62 MM
SPINDLE FLANGE: CAMLOCK GR. 8
SPINDLE TURNING SPEED RANGE: 24: 9 - 1800 U/MIN
DRIVE: 15 KW
WEIGHT OF THE MACHINE CA.: 2,75 T
DIMENSIONS OF THE MACHINE CA.: 2,8 X 1,3 X 1,3 M
ELECTRIC 380 VOLT:
CHUCK: 300 MM
COOLING EQUIPMENT:
FOLLOWING CENTERS:
RAPID TRANSFER-STEEL HOLDER MULTIFIX :
GERMAN QUALITY PRODUCT
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-pressure boiling pans by erlo in good condition.
completely made of stainless steel, has yet to function be checked, content about 280l.

dimensions: 1400x850x950mm
internal dimensions: 1030x550x510mm

the mismatch? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. PRESSURE BOILING PANS BY ERLO IN GOOD CONDITION. COMPLETELY MADE OF STAINLESS STEEL, HAS YET TO FUNCTION BE CHECKED, CONTENT ABOUT 280L. DIMENSIONS: 1400X850X950MM INTERNAL DIMENSIONS: 1030X550X510MM THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 460 mm<br/>turning diameter over slide rest: 330 mm<br/>turning length: 1000 mm<br/>centre height: 230 mm<br/>bed width: 350 mm<br/>spindle bore: 52 mm<br/>speeds: 12: 36 - 1600 u/min<br/>drive: 5,5 kw<br/>weight of the machine ca.: 1,6 t<br/>dimensions of the machine ca.: 2,4 x 1,2 x 1,5 m<br/>electric 380 volt:  <br/>fixed steady: 180 mm durchgang <br/>faceplate: 450 mm<br/>chuck protection:  <br/>emergency switsch:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 460 MM
TURNING DIAMETER OVER SLIDE REST: 330 MM
TURNING LENGTH: 1000 MM
CENTRE HEIGHT: 230 MM
BED WIDTH: 350 MM
SPINDLE BORE: 52 MM
SPEEDS: 12: 36 - 1600 U/MIN
DRIVE: 5,5 KW
WEIGHT OF THE MACHINE CA.: 1,6 T
DIMENSIONS OF THE MACHINE CA.: 2,4 X 1,2 X 1,5 M
ELECTRIC 380 VOLT:
FIXED STEADY: 180 MM DURCHGANG
FACEPLATE: 450 MM
CHUCK PROTECTION:
EMERGENCY SWITSCH:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hidroalfa press brake/workshop press

type 100 p

-capaciteit 100 ton
-max queen 1000 mm
-instelling slag
-gereedschap
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) HIDROALFA PRESS BRAKE/WORKSHOP PRESS TYPE 100 P -CAPACITEIT 100 TON -MAX QUEEN 1000 MM -INSTELLING SLAG -GEREEDSCHAP -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: used machinery auction RESALE 2.100 €
Ubicación: Land-weight approx.: 7700 kg<br/>dimensions (l x w x h) approx.: 5975 x 2550 x 3275 mm<br/>description: ? truck tractor unit<br> ? diesel engine , 8 cylinders, power 390 kws<br> ? max. total weight 18000 kg, death weight 7700 kg<br> ? drivers cabin with 2 seats and bunk bed, radio mp3 pioneer, electrical window lifters, etc<br> ? mileage 404357 km according to the counter<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the mot in order to circulate in spain<br> ? to transport this machine you need an appropriate truck with loading ramp. if you have to load it with a crane or use other means, an additional amount will be charged for this service WEIGHT APPROX.: 7700 KG
DIMENSIONS (L X W X H) APPROX.: 5975 X 2550 X 3275 MM
DESCRIPTION: ? TRUCK TRACTOR UNIT
? DIESEL ENGINE , 8 CYLINDERS, POWER 390 KWS
? MAX. TOTAL WEIGHT 18000 KG, DEATH WEIGHT 7700 KG
? DRIVERS CABIN WITH 2 SEATS AND BUNK BED, RADIO MP3 PIONEER, ELECTRICAL WINDOW LIFTERS, ETC
? MILEAGE 404357 KM ACCORDING TO THE COUNTER
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE MOT IN ORDER TO CIRCULATE IN SPAIN
? TO TRANSPORT THIS MACHINE YOU NEED AN APPROPRIATE TRUCK WITH LOADING RAMP. IF YOU HAVE TO LOAD IT WITH A CRANE OR USE OTHER MEANS, AN ADDITIONAL AMOUNT WILL BE CHARGED FOR THIS SERVICE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-combi steamer

rational scc we 61

scc = selfcookingcenter

gr = whiteefficiency

intelligence meets efficiency: the selfcookingcenter of much more than a professional ovens which knows how to deal with heat and steam is rational: thanks to the innovative four assistants, meals are prepared faster and more accurately. cook will be one experience and the cleaning of the device a breeze. the rational selfcookingcenter 61 (scc 61) is high end in your kitchen.

technical data

dimensions: hxwxd = 167 x 89 x 89 cm
    frequency: 50-60 hz
    voltage: 3nac 400 v
    power: 11,0 kw
    year of construction: 2012

execution:

electric units
    body made of stainless steel
    water connection
    shower for the roll out under the door
    right-hinged door
    inclusive stainless steel base
    includes original instruction manual
    capacity: 6 x 1/1 gn or 12 x 1/2 gn
    operating with live steam from 30 to 130 degrees
    operation with hot air from 30 to 300 degrees
    combination of steam and hot air from 30 to 300 degrees
    eia price approx.: eur 10.995,-

the selfcookingcenter 61 (scc 61) covers 95 percent of all common cooking applications.

the profi - control technology ensures an exact, demand-driven supply of energy.

the integrated self-cleaning technology with automatic descaling ensures hygienic cleanness.

the scc also by unversiertem staff can be easy to use the tft display/touch screen.

the scc 61 protects your operating costs. 

see state & accessories, original images!

if you have questions, email or call.   COMBI STEAMER RATIONAL SCC WE 61 SCC = SELFCOOKINGCENTER GR = WHITEEFFICIENCY INTELLIGENCE MEETS EFFICIENCY: THE SELFCOOKINGCENTER OF MUCH MORE THAN A PROFESSIONAL OVENS WHICH KNOWS HOW TO DEAL WITH HEAT AND STEAM IS RATIONAL: THANKS TO THE INNOVATIVE FOUR ASSISTANTS, MEALS ARE PREPARED FASTER AND MORE ACCURATELY. COOK WILL BE ONE EXPERIENCE AND THE CLEANING OF THE DEVICE A BREEZE. THE RATIONAL SELFCOOKINGCENTER 61 (SCC 61) IS HIGH END IN YOUR KITCHEN. TECHNICAL DATA DIMENSIONS: HXWXD = 167 X 89 X 89 CM FREQUENCY: 50-60 HZ VOLTAGE: 3NAC 400 V POWER: 11,0 KW YEAR OF CONSTRUCTION: 2012 EXECUTION: ELECTRIC UNITS BODY MADE OF STAINLESS STEEL WATER CONNECTION SHOWER FOR THE ROLL OUT UNDER THE DOOR RIGHT-HINGED DOOR INCLUSIVE STAINLESS STEEL BASE INCLUDES ORIGINAL INSTRUCTION MANUAL CAPACITY: 6 X 1/1 GN OR 12 X 1/2 GN OPERATING WITH LIVE STEAM FROM 30 TO 130 DEGREES OPERATION WITH HOT AIR FROM 30 TO 300 DEGREES COMBINATION OF STEAM AND HOT AIR FROM 30 TO 300 DEGREES EIA PRICE APPROX.: EUR 10.995,- THE SELFCOOKINGCENTER 61 (SCC 61) COVERS 95 PERCENT OF ALL COMMON COOKING APPLICATIONS. THE PROFI - CONTROL TECHNOLOGY ENSURES AN EXACT, DEMAND-DRIVEN SUPPLY OF ENERGY. THE INTEGRATED SELF-CLEANING TECHNOLOGY WITH AUTOMATIC DESCALING ENSURES HYGIENIC CLEANNESS. THE SCC ALSO BY UNVERSIERTEM STAFF CAN BE EASY TO USE THE TFT DISPLAY/TOUCH SCREEN. THE SCC 61 PROTECTS YOUR OPERATING COSTS. SEE STATE & ACCESSORIES, ORIGINAL IMAGES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 600 €
Ubicación: Land-weight approx.: 776 kg<br/>dimensions (l x w x h) approx.: 6100 x 2280 x 1000 mm<br/>description: ? trailer for cars transport<br> ? frame number vv4354817dmv50051<br> ? maximum total weight 3500 kg, death weight 776 kg<br> ? useful platform dimensions 4750 x 1630 mm<br> ? for more details see the photos<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the mot in order to circulate in spain WEIGHT APPROX.: 776 KG
DIMENSIONS (L X W X H) APPROX.: 6100 X 2280 X 1000 MM
DESCRIPTION: ? TRAILER FOR CARS TRANSPORT
? FRAME NUMBER VV4354817DMV50051
? MAXIMUM TOTAL WEIGHT 3500 KG, DEATH WEIGHT 776 KG
? USEFUL PLATFORM DIMENSIONS 4750 X 1630 MM
? FOR MORE DETAILS SEE THE PHOTOS
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE MOT IN ORDER TO CIRCULATE IN SPAIN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-hot forging press manzoni 750 ton 
complete of mold holder 

nominal power 750 ton 
stroke 190 mm
dimension table 780 x 600 mm
top dead center 725 mm

our ref pf105  HOT FORGING PRESS MANZONI 750 TON COMPLETE OF MOLD HOLDER NOMINAL POWER 750 TON STROKE 190 MM DIMENSION TABLE 780 X 600 MM TOP DEAD CENTER 725 MM OUR REF PF105
Vendedor: Valma Trading GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 260 €
Ubicación: Land-weight approx.: 3550 kg<br/>dimensions (l x w x h) approx.: 6580 x 2160 x 3440 mm<br/>description: ? truck<br> ? frame number zcfa79a0002362154<br> ? diesel engine, 5861 cc<br> ? max. total weight 8100 kg, death weight 3550 kg<br> ? rear twin tyres<br> ? drivers cabin with 3 seats<br> ? mileage 361437 km according to the counter<br> ? closed box, external box dimensions approx. 4880 x 2160 x 2490 mm<br> ? the truck doesnt start, the reason is unknown<br> ? the technical inspection card of this vehicle is missing<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the mot in order to circulate in spain<br> ? to transport this machine you need an appropriate truck with loading ramp WEIGHT APPROX.: 3550 KG
DIMENSIONS (L X W X H) APPROX.: 6580 X 2160 X 3440 MM
DESCRIPTION: ? TRUCK
? FRAME NUMBER ZCFA79A0002362154
? DIESEL ENGINE, 5861 CC
? MAX. TOTAL WEIGHT 8100 KG, DEATH WEIGHT 3550 KG
? REAR TWIN TYRES
? DRIVERS CABIN WITH 3 SEATS
? MILEAGE 361437 KM ACCORDING TO THE COUNTER
? CLOSED BOX, EXTERNAL BOX DIMENSIONS APPROX. 4880 X 2160 X 2490 MM
? THE TRUCK DOESNT START, THE REASON IS UNKNOWN
? THE TECHNICAL INSPECTION CARD OF THIS VEHICLE IS MISSING
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE MOT IN ORDER TO CIRCULATE IN SPAIN
? TO TRANSPORT THIS MACHINE YOU NEED AN APPROPRIATE TRUCK WITH LOADING RAMP
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.350 €
Ubicación: Land-completely made of stainless steel!
manufacturer: babu
pot 780x600x220mm made of stainless steel, steel, gasbetrieben, 19kw, adjustable from 100-310 â° c water inlet valve, electric tilt.
external dimensions: 900x900x1050mm elek. voltage: 230v elek. power: 0. 26kw not suitable? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. COMPLETELY MADE OF STAINLESS STEEL! MANUFACTURER: BABU POT 780X600X220MM MADE OF STAINLESS STEEL, STEEL, GASBETRIEBEN, 19KW, ADJUSTABLE FROM 100-310 &ACIRC;&DEG; C WATER INLET VALVE, ELECTRIC TILT. EXTERNAL DIMENSIONS: 900X900X1050MM ELEK. VOLTAGE: 230V ELEK. POWER: 0. 26KW NOT SUITABLE? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: used machinery auction RESALE 1.550 €
Ubicación: Land-weight approx.: 7195 kg<br/>dimensions (l x w x h) approx.: 6227 x 2550 x 4000 mm<br/>description: ? truck tractor unit<br> ? frame number wjmm1vth40c220041<br> ? diesel engine , 6 cylinders, 10308 cc, 332 kw<br> ? max. total weight 18000 kg, death weight 7195 kg<br> ? hydraulic brakes<br> ? drivers cabin with 2 seats and bunk bed<br> ? mileage approx. 770000 km according to the counter<br> ? it has a failure. it is tried to show in the photographs numbers 12 and 13<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the mot in order to circulate in spain<br> ? to transport this machine you need an appropriate truck with loading ramp WEIGHT APPROX.: 7195 KG
DIMENSIONS (L X W X H) APPROX.: 6227 X 2550 X 4000 MM
DESCRIPTION: ? TRUCK TRACTOR UNIT
? FRAME NUMBER WJMM1VTH40C220041
? DIESEL ENGINE , 6 CYLINDERS, 10308 CC, 332 KW
? MAX. TOTAL WEIGHT 18000 KG, DEATH WEIGHT 7195 KG
? HYDRAULIC BRAKES
? DRIVERS CABIN WITH 2 SEATS AND BUNK BED
? MILEAGE APPROX. 770000 KM ACCORDING TO THE COUNTER
? IT HAS A FAILURE. IT IS TRIED TO SHOW IN THE PHOTOGRAPHS NUMBERS 12 AND 13
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE MOT IN ORDER TO CIRCULATE IN SPAIN
? TO TRANSPORT THIS MACHINE YOU NEED AN APPROPRIATE TRUCK WITH LOADING RAMP
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-description
mark system air
model d4-dvv800 k/40
id 7289
status active
€2,500 price + vat
year 2005
location of oradea (ro)

industrial fans to extract smoke, system air dvv800 d4-k/40 in 2005.  maximum flow: 25500 m3/hr, maximum power: 9.5 kw, fuse: 18 a, maximum temperature of air transportability: 1200 c. weight: 172 kg. protection class: ip54 engine housing. rotational speed: 1440 r.p.m. 3 phase current. 5 pieces available and a backup engine. price is per piece.

exworks. price is negotiable and do not include vat. 

contact
tel.: + 359/40-175.575
fax: + 40-259/426.248
mobile: + 40-743/177.040; + 40-740/221.698

watching the product schedule 24 hours prior.

we speak english. wir sprechen deutsch. (+ 40-740/221.698)
hablamos español. beszélünk magyarul. (+ 40 743/177.040)

irrtum und zwischenverkauf vorbehalten, anderungen/
subject to errors, changes and prior to his/
we reserve the right to mistakes, changes and prior sale.

 DESCRIPTION MARK SYSTEM AIR MODEL D4-DVV800 K/40 ID 7289 STATUS ACTIVE €2,500 PRICE + VAT YEAR 2005 LOCATION OF ORADEA (RO) INDUSTRIAL FANS TO EXTRACT SMOKE, SYSTEM AIR DVV800 D4-K/40 IN 2005. MAXIMUM FLOW: 25500 M3/HR, MAXIMUM POWER: 9.5 KW, FUSE: 18 A, MAXIMUM TEMPERATURE OF AIR TRANSPORTABILITY: 1200 C. WEIGHT: 172 KG. PROTECTION CLASS: IP54 ENGINE HOUSING. ROTATIONAL SPEED: 1440 R.P.M. 3 PHASE CURRENT. 5 PIECES AVAILABLE AND A BACKUP ENGINE. PRICE IS PER PIECE. EXWORKS. PRICE IS NEGOTIABLE AND DO NOT INCLUDE VAT. CONTACT TEL.: + 359/40-175.575 FAX: + 40-259/426.248 MOBILE: + 40-743/177.040; + 40-740/221.698 WATCHING THE PRODUCT SCHEDULE 24 HOURS PRIOR. WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+ 40-740/221.698) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+ 40 743/177.040) IRRTUM UND ZWISCHENVERKAUF VORBEHALTEN, ANDERUNGEN/ SUBJECT TO ERRORS, CHANGES AND PRIOR TO HIS/ WE RESERVE THE RIGHT TO MISTAKES, CHANGES AND PRIOR SALE.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: used machinery auction RESALE 380 €
Ubicación: Land-weight approx.: 1955 kg<br/>dimensions (l x w x h) approx.: 5505 x 1998 x 2470 mm<br/>description: ? van<br> ? frame number zfaz3000005744741<br> ? diesel engine sofin 8140.43, 4 cylinders, 2800 cc, power 90 kw<br> ? manual transmission, gearbox 5 gears<br> ? maximum total weight 3500 kg, death weight 1955 kg<br> ? with lateral door, broken handle<br> ? drivers cabin with 3 seats<br> ? mileage 260307 km according to the counter<br> ? for more details see the photos<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the itv in order to circulate in spain<br> ? to transport this machine you need an appropriate truck with loading ramp WEIGHT APPROX.: 1955 KG
DIMENSIONS (L X W X H) APPROX.: 5505 X 1998 X 2470 MM
DESCRIPTION: ? VAN
? FRAME NUMBER ZFAZ3000005744741
? DIESEL ENGINE SOFIN 8140.43, 4 CYLINDERS, 2800 CC, POWER 90 KW
? MANUAL TRANSMISSION, GEARBOX 5 GEARS
? MAXIMUM TOTAL WEIGHT 3500 KG, DEATH WEIGHT 1955 KG
? WITH LATERAL DOOR, BROKEN HANDLE
? DRIVERS CABIN WITH 3 SEATS
? MILEAGE 260307 KM ACCORDING TO THE COUNTER
? FOR MORE DETAILS SEE THE PHOTOS
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE ITV IN ORDER TO CIRCULATE IN SPAIN
? TO TRANSPORT THIS MACHINE YOU NEED AN APPROPRIATE TRUCK WITH LOADING RAMP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-planing width 230 mm, planing height 140 mm - 7 shafts with universal shaft - stepless shaft feed, extraction hood, gs, ce, accessories,.  PLANING WIDTH 230 MM, PLANING HEIGHT 140 MM - 7 SHAFTS WITH UNIVERSAL SHAFT - STEPLESS SHAFT FEED, EXTRACTION HOOD, GS, CE, ACCESSORIES,.
Vendedor: voelkel-hightech
Año de construcción: usado
Precio: used machinery auction RESALE 650 €
Ubicación: Land-weight approx.: 6715 kg<br/>dimensions (l x w x h) approx.: 9060 x 2500 x 3510 mm<br/>description: ? truck<br> ? frame number zcfa1ed0002183770<br> ? diesel engine , 6 cylinders, 5861 cc, 130 kw<br> ? max. total weight 12000 kg, death weight 6715 kg<br> ? rear twin tyres<br> ? drivers cabin with 3 seats<br> ? mileage 206397 km according to the counter<br> ? aluminum box with canvas, box dimensions approx. 6900 x 2480 x 2380 mm<br> ? lifting platform of capacity 1500 kg<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the mot in order to circulate in spain<br> ? to transport this machine you need an appropriate truck with loading ramp WEIGHT APPROX.: 6715 KG
DIMENSIONS (L X W X H) APPROX.: 9060 X 2500 X 3510 MM
DESCRIPTION: ? TRUCK
? FRAME NUMBER ZCFA1ED0002183770
? DIESEL ENGINE , 6 CYLINDERS, 5861 CC, 130 KW
? MAX. TOTAL WEIGHT 12000 KG, DEATH WEIGHT 6715 KG
? REAR TWIN TYRES
? DRIVERS CABIN WITH 3 SEATS
? MILEAGE 206397 KM ACCORDING TO THE COUNTER
? ALUMINUM BOX WITH CANVAS, BOX DIMENSIONS APPROX. 6900 X 2480 X 2380 MM
? LIFTING PLATFORM OF CAPACITY 1500 KG
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE MOT IN ORDER TO CIRCULATE IN SPAIN
? TO TRANSPORT THIS MACHINE YOU NEED AN APPROPRIATE TRUCK WITH LOADING RAMP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press brake hfe m2 1003
manufacturer: amada
year: 2012

control amada
force of pressure... 100t
bending length... 3110mm
controlled axes... 8
hydraulic
the weight of the machine... 6750kg
l x w x h... 4385x2430x2680mm
maximum piston stroke... 200mm

in very good condition, possible to try out under power. PRESS BRAKE HFE M2 1003 MANUFACTURER: AMADA YEAR: 2012 CONTROL AMADA FORCE OF PRESSURE... 100T BENDING LENGTH... 3110MM CONTROLLED AXES... 8 HYDRAULIC THE WEIGHT OF THE MACHINE... 6750KG L X W X H... 4385X2430X2680MM MAXIMUM PISTON STROKE... 200MM IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Precio: used machinery auction RESALE 820 €
Ubicación: Land-weight approx.: 2740 kg<br/>dimensions (l x w x h) approx.: 6100 x 2300 x 3400 mm<br/>description: ? truck<br> ? frame number vwanbftk022521425<br> ? diesel engine , 4 cylinders, 2953 cc, 5 gears<br> ? max. total weight 3500 kg, death weight 2740 kg<br> ? rear twin tyres<br> ? drivers cabin with 3 seats, electrical window lifters<br> ? mileage approx. 249000 km according to the counter<br> ? closed box , external box dimensions approx. 4260 x 2300 x 2430 mm<br> ? the truck keys are misssing<br> ? the technical inspection card of this vehicle is missing<br> ? ownership change costs will be paid by surplex<br> ? mot certificate costs will be paid by the buyer<br> ? the buyer is responsible for passing the mot in order to circulate in spain<br> ? to transport this machine you need an appropriate truck with loading ramp WEIGHT APPROX.: 2740 KG
DIMENSIONS (L X W X H) APPROX.: 6100 X 2300 X 3400 MM
DESCRIPTION: ? TRUCK
? FRAME NUMBER VWANBFTK022521425
? DIESEL ENGINE , 4 CYLINDERS, 2953 CC, 5 GEARS
? MAX. TOTAL WEIGHT 3500 KG, DEATH WEIGHT 2740 KG
? REAR TWIN TYRES
? DRIVERS CABIN WITH 3 SEATS, ELECTRICAL WINDOW LIFTERS
? MILEAGE APPROX. 249000 KM ACCORDING TO THE COUNTER
? CLOSED BOX , EXTERNAL BOX DIMENSIONS APPROX. 4260 X 2300 X 2430 MM
? THE TRUCK KEYS ARE MISSSING
? THE TECHNICAL INSPECTION CARD OF THIS VEHICLE IS MISSING
? OWNERSHIP CHANGE COSTS WILL BE PAID BY SURPLEX
? MOT CERTIFICATE COSTS WILL BE PAID BY THE BUYER
? THE BUYER IS RESPONSIBLE FOR PASSING THE MOT IN ORDER TO CIRCULATE IN SPAIN
? TO TRANSPORT THIS MACHINE YOU NEED AN APPROPRIATE TRUCK WITH LOADING RAMP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-professional packaging machine with verpakungstrasse, scales and tables
manufacturer soco system maximum carton size: 45 cm wide and 50 cm high, length unlimited.
through the automatic height and width adjustment t 55 is ideal for packaging lines with different carton sizes
at the same time two operators can work on each side of the packtisches.

more data
see google soco denmark
 PROFESSIONAL PACKAGING MACHINE WITH VERPAKUNGSTRASSE, SCALES AND TABLES MANUFACTURER SOCO SYSTEM MAXIMUM CARTON SIZE: 45 CM WIDE AND 50 CM HIGH, LENGTH UNLIMITED. THROUGH THE AUTOMATIC HEIGHT AND WIDTH ADJUSTMENT T 55 IS IDEAL FOR PACKAGING LINES WITH DIFFERENT CARTON SIZES AT THE SAME TIME TWO OPERATORS CAN WORK ON EACH SIDE OF THE PACKTISCHES. MORE DATA SEE GOOGLE SOCO DENMARK
Vendedor: Herr Walter Gladkij
Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-; gross weight [kg]: 30000; transmission: sonstige; front tyre size: 235/75 r 17,5 126; rear tyre size: 235/75 r 17,5 126; accessories: abs; colour: grün; wheelbase: 4900; suspension type: luft/luft; cargo space dimensions [lxbxh]: 8000x2500x880; max payload [kg]: 23160 ; GROSS WEIGHT [KG]: 30000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 235/75 R 17,5 126; REAR TYRE SIZE: 235/75 R 17,5 126; ACCESSORIES: ABS; COLOUR: GRüN; WHEELBASE: 4900; SUSPENSION TYPE: LUFT/LUFT; CARGO SPACE DIMENSIONS [LXBXH]: 8000X2500X880; MAX PAYLOAD [KG]: 23160
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-built in 1970
machine weight 14 tons
machine dimensions: 4000 x 1650 x 3570 mm BUILT IN 1970 MACHINE WEIGHT 14 TONS MACHINE DIMENSIONS: 4000 X 1650 X 3570 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-pressure: 63 t<br/>throat: ca. 360 mm<br/>stroke: 500 mm<br/>pre-running speed: 0,053 m/sek<br/>return capacity: 22 t<br/>operating pressure: 125 kp/cm²<br/>return speed: 0,150 m/sek<br/>distance between table / ram: 800 mm<br/>table-size: 630 x 500 mm<br/>capacity of ejector in table: 16 t<br/>operating pressure: 140 kp/cm²<br/>ejector stroke: 160 mm<br/>drive: 8 kw<br/>weight of the machine ca.: 3 t<br/>dimensions of the machine ca.: 1,5 x 1 x 2,6 m<br/>electric 380 volt:  <br/>control unit:  <br/>draw cushion:  <br/>hydraulic high-speed single-deck press with hydr. ejector in the press table <br/>combined with thermoforming device and hydr. ejector in the ram. follow-up time <br/>231 ms. modes of operation: single stroke, continuous stroke, two - hand or <br/>foot setting, easy adjustment of the ram paths (rapid feed, travel, rapid <br/>return), selection of the changeover point rapid forward travel, press time <br/>setting via time relay.<br/>member of the association of german machine tools dealers fdm and certified <br/>trader of machine seeker.<br/><br/><br/><br/><br/> PRESSURE: 63 T
THROAT: CA. 360 MM
STROKE: 500 MM
PRE-RUNNING SPEED: 0,053 M/SEK
RETURN CAPACITY: 22 T
OPERATING PRESSURE: 125 KP/CM²
RETURN SPEED: 0,150 M/SEK
DISTANCE BETWEEN TABLE / RAM: 800 MM
TABLE-SIZE: 630 X 500 MM
CAPACITY OF EJECTOR IN TABLE: 16 T
OPERATING PRESSURE: 140 KP/CM²
EJECTOR STROKE: 160 MM
DRIVE: 8 KW
WEIGHT OF THE MACHINE CA.: 3 T
DIMENSIONS OF THE MACHINE CA.: 1,5 X 1 X 2,6 M
ELECTRIC 380 VOLT:
CONTROL UNIT:
DRAW CUSHION:
HYDRAULIC HIGH-SPEED SINGLE-DECK PRESS WITH HYDR. EJECTOR IN THE PRESS TABLE
COMBINED WITH THERMOFORMING DEVICE AND HYDR. EJECTOR IN THE RAM. FOLLOW-UP TIME
231 MS. MODES OF OPERATION: SINGLE STROKE, CONTINUOUS STROKE, TWO - HAND OR
FOOT SETTING, EASY ADJUSTMENT OF THE RAM PATHS (RAPID FEED, TRAVEL, RAPID
RETURN), SELECTION OF THE CHANGEOVER POINT RAPID FORWARD TRAVEL, PRESS TIME
SETTING VIA TIME RELAY.
MEMBER OF THE ASSOCIATION OF GERMAN MACHINE TOOLS DEALERS FDM AND CERTIFIED
TRADER OF MACHINE SEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-table clamping surface (w x l): 200 x 630 mm
max grinding width: 230 mm
max grinding length: 630 mm
maximum workpiece weight: 130 kg
maximum distance from the spindle axis by the table: 425 mm
grinding wheel (diameter x width x hole): 250 x 20 x 75 mm
-for tool making: 200 x 20 x 51 mm
minimum. grinding wheel diameter: 120 mm
-for tool making: 95 mm
max width of the composite disk: 100 mm
longitudinal feed of the table: 2-30 m / min
transverse movement of the grinding spindle:
-continuous: 0.2 30 m / min
-intermittent at top dead centre: 0.1-15 m / min
-manually 10 mm / rev
max grinding spindle feed (across x vertical): 230 x 545 mm
vertical spindle head delivery:
-automatically intermittently: 0.002 - 0.03 mm
-manual: 0.25 mm/rev (0.5).
vertical rapid movement of spindle: 0.5 m / min
speed of grinding spindle: 2140, 3500 rpm
-for tool making: 2670, 3820 min-1
spindle motor: 2,2 kw
-for tool making: 1,5 kw
floor plan area (w x l): 1288 x 2710 mm
machine weight: 1150 kg TABLE CLAMPING SURFACE (W X L): 200 X 630 MM MAX GRINDING WIDTH: 230 MM MAX GRINDING LENGTH: 630 MM MAXIMUM WORKPIECE WEIGHT: 130 KG MAXIMUM DISTANCE FROM THE SPINDLE AXIS BY THE TABLE: 425 MM GRINDING WHEEL (DIAMETER X WIDTH X HOLE): 250 X 20 X 75 MM -FOR TOOL MAKING: 200 X 20 X 51 MM MINIMUM. GRINDING WHEEL DIAMETER: 120 MM -FOR TOOL MAKING: 95 MM MAX WIDTH OF THE COMPOSITE DISK: 100 MM LONGITUDINAL FEED OF THE TABLE: 2-30 M / MIN TRANSVERSE MOVEMENT OF THE GRINDING SPINDLE: -CONTINUOUS: 0.2 30 M / MIN -INTERMITTENT AT TOP DEAD CENTRE: 0.1-15 M / MIN -MANUALLY 10 MM / REV MAX GRINDING SPINDLE FEED (ACROSS X VERTICAL): 230 X 545 MM VERTICAL SPINDLE HEAD DELIVERY: -AUTOMATICALLY INTERMITTENTLY: 0.002 - 0.03 MM -MANUAL: 0.25 MM/REV (0.5). VERTICAL RAPID MOVEMENT OF SPINDLE: 0.5 M / MIN SPEED OF GRINDING SPINDLE: 2140, 3500 RPM -FOR TOOL MAKING: 2670, 3820 MIN-1 SPINDLE MOTOR: 2,2 KW -FOR TOOL MAKING: 1,5 KW FLOOR PLAN AREA (W X L): 1288 X 2710 MM MACHINE WEIGHT: 1150 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-spindle diameter: 130 mm<br/>travel -x axis: 800 mm<br/>travel -y axis: 1000 mm<br/>travel -z axis: 900 mm<br/>spindle taper iso: iso 50 <br/>table-size: 1000 x 800 mm<br/>max. table load: 1500 kg<br/>spindle turning speed - stepless: 15 - 1500 u/min<br/>feeds infinitely variable: 1,3 - 1600 mm/u<br/>creep feed: 3 mm/min<br/>rapid traverse: 2400 / 5000 mm/min<br/>spindle motor: 7,5 kw<br/>feed motor: 2,5 kw<br/>table drive: 0,55 kw<br/>total power requirement: 9,65 kw<br/>weight of the machine ca.: 11 t<br/>dimensions of machine: 4,4 x 3 x 3,3 mm<br/>electric 380 volt:  <br/>cooling equipment:  <br/>seperate switchgear cabinet: 2,3 x 0,6 x 2,2 <br/>digital readout in 3 axis: rsf <br/>control panel:  <br/>machinelight:  <br/>travels table x = transverse, z = longitudinal, spindle head y =<br/>vertical.<br/>machine not under power. the electric cabinet has to be connected.<br/>member of the association of german machine tools dealers fdm and machine<br/>dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 130 MM
TRAVEL -X AXIS: 800 MM
TRAVEL -Y AXIS: 1000 MM
TRAVEL -Z AXIS: 900 MM
SPINDLE TAPER ISO: ISO 50
TABLE-SIZE: 1000 X 800 MM
MAX. TABLE LOAD: 1500 KG
SPINDLE TURNING SPEED - STEPLESS: 15 - 1500 U/MIN
FEEDS INFINITELY VARIABLE: 1,3 - 1600 MM/U
CREEP FEED: 3 MM/MIN
RAPID TRAVERSE: 2400 / 5000 MM/MIN
SPINDLE MOTOR: 7,5 KW
FEED MOTOR: 2,5 KW
TABLE DRIVE: 0,55 KW
TOTAL POWER REQUIREMENT: 9,65 KW
WEIGHT OF THE MACHINE CA.: 11 T
DIMENSIONS OF MACHINE: 4,4 X 3 X 3,3 MM
ELECTRIC 380 VOLT:
COOLING EQUIPMENT:
SEPERATE SWITCHGEAR CABINET: 2,3 X 0,6 X 2,2
DIGITAL READOUT IN 3 AXIS: RSF
CONTROL PANEL:
MACHINELIGHT:
TRAVELS TABLE X = TRANSVERSE, Z = LONGITUDINAL, SPINDLE HEAD Y =
VERTICAL.
MACHINE NOT UNDER POWER. THE ELECTRIC CABINET HAS TO BE CONNECTED.
MEMBER OF THE ASSOCIATION OF GERMAN MACHINE TOOLS DEALERS FDM AND MACHINE
DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cnc hydraulic press brake, cnc used press brake, used

model: euro 3.100-4100 year: 1991 make / make: baker maximum pressing force / maximum force: 100 t cnc control / control: cnc  euro iii abkanten length / working length: 4100 mm distance between stands / distance b/n columns: 3700 mm piston stroke / stroke: 215 mm height / shut height: 410 mm
throat / throat: 255 mm bending speed /.
    speed down operation: 7 mm / s return speed /.
     reject speed: 110 mm / s stroke adjustment of depth gauge / vertical adjust-
     ment of back stop: 500 mm motor power / connected load: 5.5 kw weight / machine weight: 11.2 t accessories: inventory of toolings CNC HYDRAULIC PRESS BRAKE, CNC USED PRESS BRAKE, USED MODEL: EURO 3.100-4100 YEAR: 1991 MAKE / MAKE: BAKER MAXIMUM PRESSING FORCE / MAXIMUM FORCE: 100 T CNC CONTROL / CONTROL: CNC EURO III ABKANTEN LENGTH / WORKING LENGTH: 4100 MM DISTANCE BETWEEN STANDS / DISTANCE B/N COLUMNS: 3700 MM PISTON STROKE / STROKE: 215 MM HEIGHT / SHUT HEIGHT: 410 MM THROAT / THROAT: 255 MM BENDING SPEED /. SPEED DOWN OPERATION: 7 MM / S RETURN SPEED /. REJECT SPEED: 110 MM / S STROKE ADJUSTMENT OF DEPTH GAUGE / VERTICAL ADJUST- MENT OF BACK STOP: 500 MM MOTOR POWER / CONNECTED LOAD: 5.5 KW WEIGHT / MACHINE WEIGHT: 11.2 T ACCESSORIES: INVENTORY OF TOOLINGS
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet width: 1020 mm<br/>plate thickness: 2,5 mm<br/>distance between columns: 1045 mm<br/>daylight opening: max. 47 mm<br/>bending angle max.: 135 °<br/>weight of the machine ca.: 290 kg<br/>dimensions of the machine ca.: 1,35 x 0,86 x 1,17 m<br/>sengmentable upper rail, upper clamping foot-operated, manual bending clamping <br/>operate.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SHEET WIDTH: 1020 MM
PLATE THICKNESS: 2,5 MM
DISTANCE BETWEEN COLUMNS: 1045 MM
DAYLIGHT OPENING: MAX. 47 MM
BENDING ANGLE MAX.: 135 °
WEIGHT OF THE MACHINE CA.: 290 KG
DIMENSIONS OF THE MACHINE CA.: 1,35 X 0,86 X 1,17 M
SENGMENTABLE UPPER RAIL, UPPER CLAMPING FOOT-OPERATED, MANUAL BENDING CLAMPING
OPERATE.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-prima power press brake mod p 2230 / bj. 2013 / 3000 x 220 t / 5 axes / hb 200 / max. dimensions of tools 3050 mm / kw 15 / 110 mm sec. / hour: 13,000 / top tool clamping / full accessories: willa tool set - top tool section - etc. / good condition fe.gi.maschinen.sbg.at

prima power press brake mod p 2230 / year 2013 / 3000 x 220 t / 5 axes / stroke 200 / max. dimensions of the tools 3050 mm / kw 15 / 110 mm sec. / hours: 13,000 / upper tool clamping / full accessories: willa toolset - upper tool profiles - etc... / good condition fe.gi.maschinen.sbg.at
 PRIMA POWER PRESS BRAKE MOD P 2230 / BJ. 2013 / 3000 X 220 T / 5 AXES / HB 200 / MAX. DIMENSIONS OF TOOLS 3050 MM / KW 15 / 110 MM SEC. / HOUR: 13,000 / TOP TOOL CLAMPING / FULL ACCESSORIES: WILLA TOOL SET - TOP TOOL SECTION - ETC. / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT PRIMA POWER PRESS BRAKE MOD P 2230 / YEAR 2013 / 3000 X 220 T / 5 AXES / STROKE 200 / MAX. DIMENSIONS OF THE TOOLS 3050 MM / KW 15 / 110 MM SEC. / HOURS: 13,000 / UPPER TOOL CLAMPING / FULL ACCESSORIES: WILLA TOOLSET - UPPER TOOL PROFILES - ETC... / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: 780 €
Ubicación: Land-current capacity: 16 kva<br/>throat: 400 mm<br/>weight of the machine ca.: 200 kg<br/>dimensions of the machine ca.: 0,9 x 0,4 x 1,2 m<br/>condition: ready for operation:  <br/>electric 380 volt:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> CURRENT CAPACITY: 16 KVA
THROAT: 400 MM
WEIGHT OF THE MACHINE CA.: 200 KG
DIMENSIONS OF THE MACHINE CA.: 0,9 X 0,4 X 1,2 M
CONDITION: READY FOR OPERATION:
ELECTRIC 380 VOLT:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 4.200 €
Ubicación: Land-siemens x-ray machine with electric tilting table.
ideal for vets
medira 50 generator: 50 kw table is tilting and height adjustable from 73 cm to 105 cm   SIEMENS X-RAY MACHINE WITH ELECTRIC TILTING TABLE. IDEAL FOR VETS MEDIRA 50 GENERATOR: 50 KW TABLE IS TILTING AND HEIGHT ADJUSTABLE FROM 73 CM TO 105 CM
Vendedor: Wilbert Medizintechnik
Año de construcción: usado
Ubicación: Land-roll diameter: 320 mm<br/>throat: 300 mm<br/>workpiece height: 200 mm<br/>table-size: 500 x 500 mm<br/>throat in width: 310 mm<br/>throat arm - height: 230 mm<br/>band speed: 18 --  562 m/min<br/>total power requirement: 0,9/1,3 kw<br/>weight of the machine ca.: 470 kg<br/>dimensions of the machine ca.: 0,8 x 0,8 x 1,85 m<br/>condition: ready for operation:  <br/>electric 380 volt:  <br/>complete with stumpf-welding device:  <br/>combined with shear and grinding stone:  <br/>diverse saw bands:  <br/>from a training workshop - less used.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> ROLL DIAMETER: 320 MM
THROAT: 300 MM
WORKPIECE HEIGHT: 200 MM
TABLE-SIZE: 500 X 500 MM
THROAT IN WIDTH: 310 MM
THROAT ARM - HEIGHT: 230 MM
BAND SPEED: 18 -- 562 M/MIN
TOTAL POWER REQUIREMENT: 0,9/1,3 KW
WEIGHT OF THE MACHINE CA.: 470 KG
DIMENSIONS OF THE MACHINE CA.: 0,8 X 0,8 X 1,85 M
CONDITION: READY FOR OPERATION:
ELECTRIC 380 VOLT:
COMPLETE WITH STUMPF-WELDING DEVICE:
COMBINED WITH SHEAR AND GRINDING STONE:
DIVERSE SAW BANDS:
FROM A TRAINING WORKSHOP - LESS USED.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-year of manufacture 2004
pressing force: 1300 kn
max stroke: 215 mm
operating pressure max: 340 bar
power consumption: 24 kva
control system: delem
machine weight, kg: 11250 YEAR OF MANUFACTURE 2004 PRESSING FORCE: 1300 KN MAX STROKE: 215 MM OPERATING PRESSURE MAX: 340 BAR POWER CONSUMPTION: 24 KVA CONTROL SYSTEM: DELEM MACHINE WEIGHT, KG: 11250
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-spindle diameter: 65 mm<br/>x-travel: 400 mm<br/>y-travel: 254 mm<br/>workpiece height: 250 mm<br/>table-size: 650 x 300 mm<br/>vertical movement: 340 mm<br/>passage: lkb: 505 / lks: 370 mm<br/>planetary speed: 40-500 u/min<br/>cutting capacity stainless steel: lkb: 270 / lks 300 mm<br/>spindle stroke: lkb: 100 / lks: 5 - 75 mm<br/>speeds infinitely variable: lks: 15.000-60.000 u/min.<br/>speeds: lkb: 40 - 3.150 u/min<br/>tool taper: sk 40 <br/>feeds: 1-2-4 und 3-6-12 mm/wu<br/>min./max. hole to grind: 0,8-125 mm<br/>drive: 2 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 1,15 t<br/>dimensions of the machine ca.: 1,5 x 1,5 x 1,9 m<br/>condition: very good:  <br/>electric 380 volt:  <br/>seperate control cabinet: 2 x lkb/lks <br/>2 axis digital readout: heidenhain <br/>diverse accessories: 2 werkzeugschränke <br/>miller ( diverse ):  <br/>tool receiving divers:  <br/>coordinate grinding and drilling machine = combined machine<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 65 MM
X-TRAVEL: 400 MM
Y-TRAVEL: 254 MM
WORKPIECE HEIGHT: 250 MM
TABLE-SIZE: 650 X 300 MM
VERTICAL MOVEMENT: 340 MM
PASSAGE: LKB: 505 / LKS: 370 MM
PLANETARY SPEED: 40-500 U/MIN
CUTTING CAPACITY STAINLESS STEEL: LKB: 270 / LKS 300 MM
SPINDLE STROKE: LKB: 100 / LKS: 5 - 75 MM
SPEEDS INFINITELY VARIABLE: LKS: 15.000-60.000 U/MIN.
SPEEDS: LKB: 40 - 3.150 U/MIN
TOOL TAPER: SK 40
FEEDS: 1-2-4 UND 3-6-12 MM/WU
MIN./MAX. HOLE TO GRIND: 0,8-125 MM
DRIVE: 2 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1,15 T
DIMENSIONS OF THE MACHINE CA.: 1,5 X 1,5 X 1,9 M
CONDITION: VERY GOOD:
ELECTRIC 380 VOLT:
SEPERATE CONTROL CABINET: 2 X LKB/LKS
2 AXIS DIGITAL READOUT: HEIDENHAIN
DIVERSE ACCESSORIES: 2 WERKZEUGSCHRäNKE
MILLER ( DIVERSE ):
TOOL RECEIVING DIVERS:
COORDINATE GRINDING AND DRILLING MACHINE = COMBINED MACHINE
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-useful length of bending: 3100 mm
control system: delem da 65.
hydraulic crowning system acsg1
distance between the supports: 2600 mm
max power: 105 t.
table height: 920 mm
gradient descent speed: 100 mm / s
controlled speed: 0-10 mm / s
(380 v - 50 hz) motor power: 11 kw
machine weight 7.4 t
tools are not included
 USEFUL LENGTH OF BENDING: 3100 MM CONTROL SYSTEM: DELEM DA 65. HYDRAULIC CROWNING SYSTEM ACSG1 DISTANCE BETWEEN THE SUPPORTS: 2600 MM MAX POWER: 105 T. TABLE HEIGHT: 920 MM GRADIENT DESCENT SPEED: 100 MM / S CONTROLLED SPEED: 0-10 MM / S (380 V - 50 HZ) MOTOR POWER: 11 KW MACHINE WEIGHT 7.4 T TOOLS ARE NOT INCLUDED
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-turning diameter over bed:652 mm<br/>turning diameter over slide:440 mm<br/>turning length:1500 mm<br/>swing diameter over slide rest:440 mm<br/>bed width:350 mm<br/>spindle bore:80 mm<br/>spindle speed:30-1500 (3 stufig)  u/min<br/>spindle taper:a2-8 <br/>longitudinal feeds::0,05-1,5 <br/>cross feeds::0.025 - 0.752 <br/>tailstock quill stroke:200 mm<br/>tailstock quill diameter:95 mm<br/>tailstock quill taper mt:5 mk<br/>tool post size:25x25 mm<br/>power requirement:7,5 kw<br/>weight of the machine ca.:3000 kg<br/>dimensions:3600x1140x1610 mm<br/>dro:2-achsen von fagor <br/>stepless speed: <br/>fixed steady:option <br/>follower rest:option <br/>tool holder:4-fach <br/>: <br/>rapid travel - longitudinal + cross: <br/>european electric: <br/>ce-design: <br/>3 jaw chuck Ø:315 mm<br/>automatic lubrication system: <br/>chip pan: <br/>coolant system: <br/>: <br/>splash guard:am schlitten mit mikroschalter <br/>: <br/>led work light: <br/>: <br/>dead centers: <br/>reducing bush: <br/>: <br/>right hand appron: <br/><br/>factory new l & z lathe with 2-axis digital display f. constant cutting speed and many more.  characteristics: powerful, flexible and productive with an optimal price / performance ratio for the growing requirements of turning shops, toolmakers and other mechanical plants as well as training centers  warranty: 12 months  payment: 100% before loading the machine  fig. shows dlz 325 with further options  made in europe!   for fixed lump sums, we also offer free delivery, including assembly, commissioning, instruction of the operating personnel as well as ready to hand over the machine. service, spare parts supply, the subsequent supply of accessories is also guaranteed by us.  other accessories and models partly from stock or available at short notice.  benefit from the favorable leasing and hire-purchase conditions of abc leasing: ask us for it. TURNING DIAMETER OVER BED:652 MM
TURNING DIAMETER OVER SLIDE:440 MM
TURNING LENGTH:1500 MM
SWING DIAMETER OVER SLIDE REST:440 MM
BED WIDTH:350 MM
SPINDLE BORE:80 MM
SPINDLE SPEED:30-1500 (3 STUFIG) U/MIN
SPINDLE TAPER:A2-8
LONGITUDINAL FEEDS::0,05-1,5
CROSS FEEDS::0.025 - 0.752
TAILSTOCK QUILL STROKE:200 MM
TAILSTOCK QUILL DIAMETER:95 MM
TAILSTOCK QUILL TAPER MT:5 MK
TOOL POST SIZE:25X25 MM
POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:3000 KG
DIMENSIONS:3600X1140X1610 MM
DRO:2-ACHSEN VON FAGOR
STEPLESS SPEED:
FIXED STEADY:OPTION
FOLLOWER REST:OPTION
TOOL HOLDER:4-FACH
:
RAPID TRAVEL - LONGITUDINAL + CROSS:
EUROPEAN ELECTRIC:
CE-DESIGN:
3 JAW CHUCK Ø:315 MM
AUTOMATIC LUBRICATION SYSTEM:
CHIP PAN:
COOLANT SYSTEM:
:
SPLASH GUARD:AM SCHLITTEN MIT MIKROSCHALTER
:
LED WORK LIGHT:
:
DEAD CENTERS:
REDUCING BUSH:
:
RIGHT HAND APPRON:

FACTORY NEW L & Z LATHE WITH 2-AXIS DIGITAL DISPLAY F. CONSTANT CUTTING SPEED AND MANY MORE. CHARACTERISTICS: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO FOR THE GROWING REQUIREMENTS OF TURNING SHOPS, TOOLMAKERS AND OTHER MECHANICAL PLANTS AS WELL AS TRAINING CENTERS WARRANTY: 12 MONTHS PAYMENT: 100% BEFORE LOADING THE MACHINE FIG. SHOWS DLZ 325 WITH FURTHER OPTIONS MADE IN EUROPE! FOR FIXED LUMP SUMS, WE ALSO OFFER FREE DELIVERY, INCLUDING ASSEMBLY, COMMISSIONING, INSTRUCTION OF THE OPERATING PERSONNEL AS WELL AS READY TO HAND OVER THE MACHINE. SERVICE, SPARE PARTS SUPPLY, THE SUBSEQUENT SUPPLY OF ACCESSORIES IS ALSO GUARANTEED BY US. OTHER ACCESSORIES AND MODELS PARTLY FROM STOCK OR AVAILABLE AT SHORT NOTICE. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US FOR IT.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-notching machine
unauthorised: indumasch type: v204
built in about 1980
weight 990 kg approx.
blade length: 200 mm
cutting capacity mild steel: 4.0 mm
cutting performance of va: 3.0 mm
table size: 1000 x 860 mm
variable notching angle: 30-140â°
power: 4,0 kw contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 
 NOTCHING MACHINE UNAUTHORISED: INDUMASCH TYPE: V204 BUILT IN ABOUT 1980 WEIGHT 990 KG APPROX. BLADE LENGTH: 200 MM CUTTING CAPACITY MILD STEEL: 4.0 MM CUTTING PERFORMANCE OF VA: 3.0 MM TABLE SIZE: 1000 X 860 MM VARIABLE NOTCHING ANGLE: 30-140&ACIRC;&DEG; POWER: 4,0 KW CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-neuer platten-schwenk-fix\r\nfabr.: rehnen\r\ntyp: psf-250\r\n\r\ntechnische daten:\r\n\r\nauflagehöhe\r\n- stehend: ca. 120 - 340 mm\r\n- liegend: ca. 890 - 1200 mm\r\nmax. plattengröße: 5200 × 2100 mm\r\ntragkraft: 250 kg\r\n\r\n- ideal für die entnahme von platten aus ihrem stehenden plattenlager.\r\n\r\n- zum innerbetrieblichen transport der platten zur stehenden oder liegenden \r\nplattenaufteilsäge. \r\n\r\n- die stufenlos höhenverstellbare auflagefläche kann somit genau auf die höhe ihrer plattensäge angepasst werden. \r\n\r\n- platten bis max. 250 kg können von einem bediener alleine transportiert oder geschwenkt werden.\r\n NEUER PLATTEN-SCHWENK-FIX\R\NFABR.: REHNEN\R\NTYP: PSF-250\R\N\R\NTECHNISCHE DATEN:\R\N\R\NAUFLAGEHöHE\R\N- STEHEND: CA. 120 - 340 MM\R\N- LIEGEND: CA. 890 - 1200 MM\R\NMAX. PLATTENGRößE: 5200 × 2100 MM\R\NTRAGKRAFT: 250 KG\R\N\R\N- IDEAL FüR DIE ENTNAHME VON PLATTEN AUS IHREM STEHENDEN PLATTENLAGER.\R\N\R\N- ZUM INNERBETRIEBLICHEN TRANSPORT DER PLATTEN ZUR STEHENDEN ODER LIEGENDEN \R\NPLATTENAUFTEILSäGE. \R\N\R\N- DIE STUFENLOS HöHENVERSTELLBARE AUFLAGEFLäCHE KANN SOMIT GENAU AUF DIE HöHE IHRER PLATTENSäGE ANGEPASST WERDEN. \R\N\R\N- PLATTEN BIS MAX. 250 KG KöNNEN VON EINEM BEDIENER ALLEINE TRANSPORTIERT ODER GESCHWENKT WERDEN.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 11.500 €
Ubicación: Land-ref.-no. 00549 abc

ref.nr. 00549a orion
description cnc lathe manufacturer orion
(hahn & kolb) 
model pd200
built in 1991
nominal voltage 380 v
control voltage 24v
performance 12, 5kw
nominal current 25a
back-up fuse 35a weight 2000 kg ref.nr. 00549b zach
description milling machine manufacturer g.g.. zach ref.nr. 00549c of maharjan description lathe manufacturer maharjan deadline now

price 11,500 euros from site 
 REF.-NO. 00549 ABC REF.NR. 00549A ORION DESCRIPTION CNC LATHE MANUFACTURER ORION (HAHN & KOLB) MODEL PD200 BUILT IN 1991 NOMINAL VOLTAGE 380 V CONTROL VOLTAGE 24V PERFORMANCE 12, 5KW NOMINAL CURRENT 25A BACK-UP FUSE 35A WEIGHT 2000 KG REF.NR. 00549B ZACH DESCRIPTION MILLING MACHINE MANUFACTURER G.G.. ZACH REF.NR. 00549C OF MAHARJAN DESCRIPTION LATHE MANUFACTURER MAHARJAN DEADLINE NOW PRICE 11,500 EUROS FROM SITE
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 485 mm<br/>turning diameter over slide rest: 305 mm<br/>turning length: 2500 mm<br/>centre height: 232 mm<br/>spindle turning speed range: 30: 11,2 - 2240 u/min<br/>bed width: 360 mm<br/>spindle bore: 62 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 2,5 t<br/>dimensions of the machine ca.: 4,3 x 1,2 x 1,65 m<br/>electric 380 volt:  <br/>cooling equipment:  <br/>chip pan:  <br/>:  <br/>:  <br/>fixed steady:  <br/>multifix-toolholder with tapers:  <br/>machinelight:  <br/>2 axis digital readout:  <br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 485 MM
TURNING DIAMETER OVER SLIDE REST: 305 MM
TURNING LENGTH: 2500 MM
CENTRE HEIGHT: 232 MM
SPINDLE TURNING SPEED RANGE: 30: 11,2 - 2240 U/MIN
BED WIDTH: 360 MM
SPINDLE BORE: 62 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 2,5 T
DIMENSIONS OF THE MACHINE CA.: 4,3 X 1,2 X 1,65 M
ELECTRIC 380 VOLT:
COOLING EQUIPMENT:
CHIP PAN:
:
:
FIXED STEADY:
MULTIFIX-TOOLHOLDER WITH TAPERS:
MACHINELIGHT:
2 AXIS DIGITAL READOUT:
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-ref.nr. 00545 designation of the system of cnc lathe with short rod loader manufacturer haas model sl 10 series year 2009 operating hours shifts
spindle run time approx. 6900 h standard equipment haas cnc control visual quick code (dialog programming)
programming support through g - / m-commands manual werkzeugvermersseinrichtung coolant system (approx. 4 bar pressure)
digital servo spindle drive
brushless ac servo-motors
electronic temperature compensation system
sysnchronisietes threaded drill / cut complete hollow clamping device incl. chuck
spiral chip conveyors (discharge chute to the right)
spindle orientation +-0.1 degrees 15 ' lcd farbbildschilm usb - rs 232 interface
user macro v
1mb program memory; 5 free m functions
automatic lubrication system, oil separator
tool time monitoring
revolver in bolt on vdi 12 stations o. wzg halter specifications umlaufdurchm. machine bed 413 mm
umlaufdurchm. over bed slide 203 mm
rotary chuck sizes 165 mm / * 210 mm
bar passage 44 mm / * 50 mm
max rotation ã? top size 279 mm / 419 mm
maximum speed of main spindle 6000 / * 4000 min-1
torque 102 nm to 650 min-1
torque b series 209 nm to 650 min-1 maximum main spindle drive power 11, 2kw / * 14.9 kw
spindle bore 59 mm / 76 mm
hole in the train pipe 46 mm / * 52 mm
traverse paths x axis / z axis 159 mm / 356 mm
rapid traverse "x z" 30 m / min
revolver / stations vdi 30/12 (6 x drill, outdoor deer)
revolver switching time station - station 1 sec
positioning accuracy â±0. 0051
repetition accuracy â±0. 0025
machine weight 2495 kg incl. bar loader deadline and tailstock free from kw 16/17 
 REF.NR. 00545 DESIGNATION OF THE SYSTEM OF CNC LATHE WITH SHORT ROD LOADER MANUFACTURER HAAS MODEL SL 10 SERIES YEAR 2009 OPERATING HOURS SHIFTS SPINDLE RUN TIME APPROX. 6900 H STANDARD EQUIPMENT HAAS CNC CONTROL VISUAL QUICK CODE (DIALOG PROGRAMMING) PROGRAMMING SUPPORT THROUGH G - / M-COMMANDS MANUAL WERKZEUGVERMERSSEINRICHTUNG COOLANT SYSTEM (APPROX. 4 BAR PRESSURE) DIGITAL SERVO SPINDLE DRIVE BRUSHLESS AC SERVO-MOTORS ELECTRONIC TEMPERATURE COMPENSATION SYSTEM SYSNCHRONISIETES THREADED DRILL / CUT COMPLETE HOLLOW CLAMPING DEVICE INCL. CHUCK SPIRAL CHIP CONVEYORS (DISCHARGE CHUTE TO THE RIGHT) SPINDLE ORIENTATION +-0.1 DEGREES 15 ' LCD FARBBILDSCHILM USB - RS 232 INTERFACE USER MACRO V 1MB PROGRAM MEMORY; 5 FREE M FUNCTIONS AUTOMATIC LUBRICATION SYSTEM, OIL SEPARATOR TOOL TIME MONITORING REVOLVER IN BOLT ON VDI 12 STATIONS O. WZG HALTER SPECIFICATIONS UMLAUFDURCHM. MACHINE BED 413 MM UMLAUFDURCHM. OVER BED SLIDE 203 MM ROTARY CHUCK SIZES 165 MM / * 210 MM BAR PASSAGE 44 MM / * 50 MM MAX ROTATION &ATILDE;? TOP SIZE 279 MM / 419 MM MAXIMUM SPEED OF MAIN SPINDLE 6000 / * 4000 MIN-1 TORQUE 102 NM TO 650 MIN-1 TORQUE B SERIES 209 NM TO 650 MIN-1 MAXIMUM MAIN SPINDLE DRIVE POWER 11, 2KW / * 14.9 KW SPINDLE BORE 59 MM / 76 MM HOLE IN THE TRAIN PIPE 46 MM / * 52 MM TRAVERSE PATHS X AXIS / Z AXIS 159 MM / 356 MM RAPID TRAVERSE "X Z" 30 M / MIN REVOLVER / STATIONS VDI 30/12 (6 X DRILL, OUTDOOR DEER) REVOLVER SWITCHING TIME STATION - STATION 1 SEC POSITIONING ACCURACY &ACIRC;&PLUSMN;0. 0051 REPETITION ACCURACY &ACIRC;&PLUSMN;0. 0025 MACHINE WEIGHT 2495 KG INCL. BAR LOADER DEADLINE AND TAILSTOCK FREE FROM KW 16/17
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-x-travel: 420 mm<br/>y-travel: 200 mm<br/>z-travel: 330 mm<br/>spindle taper: sk 40 <br/>table load: 200 kg<br/>carrier height until: 16: 11,2 - 355 mm/min.<br/>spindle turning speed range: 16: 56 - 1800 u/min<br/>table surface area: 710 x 315 mm<br/>dimensions (l/w/h): 1,6 x 1,3 x 2 m<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 1,3 t<br/>dimensions of the machine ca.:  m<br/>electric 380 volt:  <br/>3-axis digital readout: fagor <br/>cooling equipment:  <br/>central lubrication:  <br/>dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> X-TRAVEL: 420 MM
Y-TRAVEL: 200 MM
Z-TRAVEL: 330 MM
SPINDLE TAPER: SK 40
TABLE LOAD: 200 KG
CARRIER HEIGHT UNTIL: 16: 11,2 - 355 MM/MIN.
SPINDLE TURNING SPEED RANGE: 16: 56 - 1800 U/MIN
TABLE SURFACE AREA: 710 X 315 MM
DIMENSIONS (L/W/H): 1,6 X 1,3 X 2 M
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 1,3 T
DIMENSIONS OF THE MACHINE CA.: M
ELECTRIC 380 VOLT:
3-AXIS DIGITAL READOUT: FAGOR
COOLING EQUIPMENT:
CENTRAL LUBRICATION:
DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-lvd cnc bending machine mod ppeb 135-30 / bj. 99 / 3050 x 135 t. crowning clear stand width 2600 / stroke 200 / throat depth 400 / accessories / / monitor broken / good condition
fe.gi.maschinen.sbg.at

lvd cnc press brake mod ppeb 135-30 / year 99 / 3050 x 135 t / crowning / clear column width 2600 / broken stroke 200 projection 400 / accessories / monitor / good condition
fe.gi.maschinen.sbg.at LVD CNC BENDING MACHINE MOD PPEB 135-30 / BJ. 99 / 3050 X 135 T. CROWNING CLEAR STAND WIDTH 2600 / STROKE 200 / THROAT DEPTH 400 / ACCESSORIES / / MONITOR BROKEN / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT LVD CNC PRESS BRAKE MOD PPEB 135-30 / YEAR 99 / 3050 X 135 T / CROWNING / CLEAR COLUMN WIDTH 2600 / BROKEN STROKE 200 PROJECTION 400 / ACCESSORIES / MONITOR / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: 37.260 €
Ubicación: Land-: 315 mm<br/>: 630 mm<br/>: 430 mm<br/>: 830 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 11 nr<br/>: 103 mm<br/>: 120 m<br/>: 11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.310 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 315 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 35.120,-   turning length 1.500 mm ? 35.900,-   turning length 3.000 mm ? 40.840,-   turning length 4.000 mm ? 44.880,-   turning length 5.000 mm ? 55.380,-   <br/><br/> <br/><br/>entre height: 315 mm<br/>swing over bed: 630 mm<br/>swing over cross slide: 430 mm<br/>swing in gap: 830 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 103 mm<br/>spindle taper: m 120<br/>spindle speeds (17): 12,5 ? 1.250 rpm<br/>main motor power: 11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 ? 12 mm/r<br/>cross feed range: 0,02 ? 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 3.310 kg<br/><br/><br/><br/> : 315 MM
: 630 MM
: 430 MM
: 830 MM
: 400 MM
: 2.000 MM
: . 11 NR
: 103 MM
: 120 M
: 11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.310 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 315 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 35.120,- TURNING LENGTH 1.500 MM ? 35.900,- TURNING LENGTH 3.000 MM ? 40.840,- TURNING LENGTH 4.000 MM ? 44.880,- TURNING LENGTH 5.000 MM ? 55.380,-



ENTRE HEIGHT: 315 MM
SWING OVER BED: 630 MM
SWING OVER CROSS SLIDE: 430 MM
SWING IN GAP: 830 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 103 MM
SPINDLE TAPER: M 120
SPINDLE SPEEDS (17): 12,5 ? 1.250 RPM
MAIN MOTOR POWER: 11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 ? 12 MM/R
CROSS FEED RANGE: 0,02 ? 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 3.310 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-stock nr 1381
machine cnc hydraulic pressbrake stp/stp-c
manufacturer schiavi bmt
year of manufacture 2008
condition excellent
location greece
cnc contyrol sirio task 84
effective bending length 4000 mm
bending force 220 ton
tools 1402 / c / 8 STOCK NR 1381 MACHINE CNC HYDRAULIC PRESSBRAKE STP/STP-C MANUFACTURER SCHIAVI BMT YEAR OF MANUFACTURE 2008 CONDITION EXCELLENT LOCATION GREECE CNC CONTYROL SIRIO TASK 84 EFFECTIVE BENDING LENGTH 4000 MM BENDING FORCE 220 TON TOOLS 1402 / C / 8
Vendedor: PROFIT Machinery Point Ltd
Año de construcción: usado
Precio: 30.380 €
Ubicación: Land-: 250 mm<br/>: 500 mm<br/>: 300 mm<br/>: 700 mm<br/>: 400 mm<br/>: 1.500 mm<br/>: . 8 nr<br/>: 72 mm<br/>: 80 m<br/>: 7,5/11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 2.950 kg<br/>driven by manual transmission<br/>3-axes digital readout<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 250 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 29.600,-   turning length 2.000 mm ? 31.740,-   turning length 3.000 mm ? 35.220,-   turning length 4.000 mm ? 39.360,-   turning length 5.000 mm ? 49.760,-   <br/><br/><br/><br/>centre height: 250 mm<br/>swing over bed: 500 mm<br/>swing over cross slide: 300 mm<br/>swing in gap: 700 mm<br/>width of bed: 400 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 8<br/>spindlebore: 72 mm<br/>spindle taper: mt 80<br/>spindle speeds (21): 20 ? 2.000 rpm<br/>main motor power: 7,5/11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 ? 12 mm/r<br/>cross feed range: 0,02 ? 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 2.950 kg<br/><br/><br/><br/> : 250 MM
: 500 MM
: 300 MM
: 700 MM
: 400 MM
: 1.500 MM
: . 8 NR
: 72 MM
: 80 M
: 7,5/11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 2.950 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 250 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 29.600,- TURNING LENGTH 2.000 MM ? 31.740,- TURNING LENGTH 3.000 MM ? 35.220,- TURNING LENGTH 4.000 MM ? 39.360,- TURNING LENGTH 5.000 MM ? 49.760,-



CENTRE HEIGHT: 250 MM
SWING OVER BED: 500 MM
SWING OVER CROSS SLIDE: 300 MM
SWING IN GAP: 700 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLEBORE: 72 MM
SPINDLE TAPER: MT 80
SPINDLE SPEEDS (21): 20 ? 2.000 RPM
MAIN MOTOR POWER: 7,5/11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 ? 12 MM/R
CROSS FEED RANGE: 0,02 ? 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 2.950 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DEA types: