123 ofertas

Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-martin dressing planer
type t 52
planing width 500 mm
total length of table 2840 mm
greatest depth - depth of cut 16 mm
5000 rpm.
power of the engine 5.5 kw
ab fence
gs mark
very good condition, from training workshop
checked
operating instructions MARTIN DRESSING PLANER TYPE T 52 PLANING WIDTH 500 MM TOTAL LENGTH OF TABLE 2840 MM GREATEST DEPTH - DEPTH OF CUT 16 MM 5000 RPM. POWER OF THE ENGINE 5.5 KW AB FENCE GS MARK VERY GOOD CONDITION, FROM TRAINING WORKSHOP CHECKED OPERATING INSTRUCTIONS
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 790 €
Ubicación: Land-abrichthobelmaschine mã¼ller brugg fa-5m

planing width 500 mm
2 fair wave
with suva protection
l x w x h: 2.3 x 1.1 x 1.0 m
weight approx. 900 kg
built in 1959

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      
 

  
 ABRICHTHOBELMASCHINE MüLLER BRUGG FA-5M PLANING WIDTH 500 MM 2 FAIR WAVE WITH SUVA PROTECTION L X W X H: 2.3 X 1.1 X 1.0 M WEIGHT APPROX. 900 KG BUILT IN 1959 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-set off by hofmann
380 volts
4 cutter
planing width ca. 60 cm
hã¶henschnellverstellung levers
table length 246 cm
 SET OFF BY HOFMANN 380 VOLTS 4 CUTTER PLANING WIDTH CA. 60 CM HöHENSCHNELLVERSTELLUNG LEVERS TABLE LENGTH 246 CM
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Ubicación: Land-table-model with movable table\r\nworking width 400 mm, thickness 10 mm,\r\nlubrication system for the knives TABLE-MODEL WITH MOVABLE TABLE\R\NWORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-planing width 510 mm
lxwxh: 2880 x 850 x 920 mm
weight 800 kg
swivel stop PLANING WIDTH 510 MM LXWXH: 2880 X 850 X 920 MM WEIGHT 800 KG SWIVEL STOP
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-modell 650.460.11.35.20, semi automatic\r\nworking width 460 mm, thickness 11 mm,\r\nlubrication system for the knives\r\n MODELL 650.460.11.35.20, SEMI AUTOMATIC\R\NWORKING WIDTH 460 MM, THICKNESS 11 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-motor 4,0 kw
star-triangle switch above
planing width 520 mm
tabletop 1580 mm
acceptance table 1140 mm
segment planer shaft z = 210 x 45 mm wide segments, 2 x 30 mm wide segments
with 24 reversible knives
limb protection
suction ã? 140 mm MOTOR 4,0 KW STAR-TRIANGLE SWITCH ABOVE PLANING WIDTH 520 MM TABLETOP 1580 MM ACCEPTANCE TABLE 1140 MM SEGMENT PLANER SHAFT Z = 210 X 45 MM WIDE SEGMENTS, 2 X 30 MM WIDE SEGMENTS WITH 24 REVERSIBLE KNIVES LIMB PROTECTION SUCTION Ã? 140 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-type	civ
working width	410 mm
in feeding table	1250 mm
out feeding table	1000 mm
overall length 	2300 mm
measurements of fence	1130x160 mm
number of knives	3
motor power	3 kw
made in france	
transport dimensions	2300x900x1100mm
weight	450 kg
 TYPE CIV WORKING WIDTH 410 MM IN FEEDING TABLE 1250 MM OUT FEEDING TABLE 1000 MM OVERALL LENGTH 2300 MM MEASUREMENTS OF FENCE 1130X160 MM NUMBER OF KNIVES 3 MOTOR POWER 3 KW MADE IN FRANCE TRANSPORT DIMENSIONS 2300X900X1100MM WEIGHT 450 KG
Vendedor: MEDIENOS STAKLES, UAB
Año de construcción: usado
Ubicación: Land-semi automatic, working width 440 mm, thickness 10 mm,\r\nlubrication system for the knives SEMI AUTOMATIC, WORKING WIDTH 440 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine setup (bj. 2001 / unused) biomass/waste power plant 2,5 mw el.

-new grate firing

-waste heat boilers (water pipe waste heat boilers, evaporator, superheater heating surfaces, economizer)
  steam capacity: 15 t / h
  approval overpressure: 49 bar(g)
  operating pressure: 40 bar
  calculating temperature superheater: 500 â° c
  operating temperature superheater: 450 â° c
  heat exchanger water temperature: 120 â° c
  feed water temperature after heat exchanger: 155 â° c
  water evaporator: 9760 l
  water content superheater: 760 l
  water content economiser: 1230 l
  heating surface evaporator: 547m 2
  heating surface superheater: 108m 2
  heating economiser: 636m 2

-flue gas scrubbing (quencher, quenchwasserumlauf 60 m3/h) for the cleaning of the flue gas residual dust and gaseous pollutants etc.

-train system / chimney (21 m)

-water tanks

-turbine exhaust steam condensation system / heating capacitor unit 110/70 â° c.

-steuerâ?? and monitoring systems

-water tanks, degassing, boiler feed pumps

-cooling water re-cooling plant

-piping system, cabling

-bennstoffâ?? and ash handling equipment

-turbine plant 40 bar 2.6 mw el.  (10 kv - generator 50 hz)

high pressure steam turbine
  minimum (limit) 37 bar 325 â° c
  normal (operation) 39 bar 450 â° c
  maximum (operating) 47 bar 480 â° c
  maximum (limit) 52 bar 500 â° c
  exhaust on 3.5 minimum bar 248 â° c low pressure steam turbine (limit value) 2.6 bar 198 â° c
  normal (operation) 3.5 bar 248 â° c
  maximum (limit) 4.6 bar 399 â° c
  evaporation on 1,2 bar 60 â° c

-generator
  maximum 2,600 kw, min. 600 kw, 10,5 kv.
  
-turbine vacuum condenser (cooling water)

-condensate collecting tank, condensate collectors, condensate pumps - steam forming station (turbine bypass station)
 MACHINE SETUP (BJ. 2001 / UNUSED) BIOMASS/WASTE POWER PLANT 2,5 MW EL. -NEW GRATE FIRING -WASTE HEAT BOILERS (WATER PIPE WASTE HEAT BOILERS, EVAPORATOR, SUPERHEATER HEATING SURFACES, ECONOMIZER) STEAM CAPACITY: 15 T / H APPROVAL OVERPRESSURE: 49 BAR(G) OPERATING PRESSURE: 40 BAR CALCULATING TEMPERATURE SUPERHEATER: 500 ° C OPERATING TEMPERATURE SUPERHEATER: 450 ° C HEAT EXCHANGER WATER TEMPERATURE: 120 ° C FEED WATER TEMPERATURE AFTER HEAT EXCHANGER: 155 ° C WATER EVAPORATOR: 9760 L WATER CONTENT SUPERHEATER: 760 L WATER CONTENT ECONOMISER: 1230 L HEATING SURFACE EVAPORATOR: 547M 2 HEATING SURFACE SUPERHEATER: 108M 2 HEATING ECONOMISER: 636M 2 -FLUE GAS SCRUBBING (QUENCHER, QUENCHWASSERUMLAUF 60 M3/H) FOR THE CLEANING OF THE FLUE GAS RESIDUAL DUST AND GASEOUS POLLUTANTS ETC. -TRAIN SYSTEM / CHIMNEY (21 M) -WATER TANKS -TURBINE EXHAUST STEAM CONDENSATION SYSTEM / HEATING CAPACITOR UNIT 110/70 ° C. -STEUER�? AND MONITORING SYSTEMS -WATER TANKS, DEGASSING, BOILER FEED PUMPS -COOLING WATER RE-COOLING PLANT -PIPING SYSTEM, CABLING -BENNSTOFF�? AND ASH HANDLING EQUIPMENT -TURBINE PLANT 40 BAR 2.6 MW EL. (10 KV - GENERATOR 50 HZ) HIGH PRESSURE STEAM TURBINE MINIMUM (LIMIT) 37 BAR 325 ° C NORMAL (OPERATION) 39 BAR 450 ° C MAXIMUM (OPERATING) 47 BAR 480 ° C MAXIMUM (LIMIT) 52 BAR 500 ° C EXHAUST ON 3.5 MINIMUM BAR 248 ° C LOW PRESSURE STEAM TURBINE (LIMIT VALUE) 2.6 BAR 198 ° C NORMAL (OPERATION) 3.5 BAR 248 ° C MAXIMUM (LIMIT) 4.6 BAR 399 ° C EVAPORATION ON 1,2 BAR 60 ° C -GENERATOR MAXIMUM 2,600 KW, MIN. 600 KW, 10,5 KV. -TURBINE VACUUM CONDENSER (COOLING WATER) -CONDENSATE COLLECTING TANK, CONDENSATE COLLECTORS, CONDENSATE PUMPS - STEAM FORMING STATION (TURBINE BYPASS STATION)
Vendedor: Firewood Project SRL
Año de construcción: usado
Ubicación: Land-semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives SEMI AUTOMATIC, WORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-x-compound compounding extruder

type ck200- chd280 including:
n° 2xs-200 inlet screw
ko-kneader nominal size 200 – 12l/d
discharge screw 8l/d (chd 280)
water ring degassing unit
n° 5 heating unit (heat transfer oil) type regloplas 300/24/fm30/1k
electrical panel:
plc simatic s7300
pc-visualisation system
spare parts
n° 1 gearbox xc30/35 flender ratio 3:1 for the ck200 ko-kneader
n° 1 engine for the ko-kneader – 1000 kw power supply 690 vac
n° 1 gearbox flender e2 ha10 for the chd280 discharge screw and engine
average output 2800 kg/h of hdpe mfi (190/2,16) = 0.4 g/10min with a filter package of 110 micron.
construction year 2003
can be seen running
constructor’s brochure available : abc://abc.x-compound.ch/technology/applications/masterbatches/ X-COMPOUND COMPOUNDING EXTRUDER TYPE CK200- CHD280 INCLUDING: N° 2XS-200 INLET SCREW KO-KNEADER NOMINAL SIZE 200 – 12L/D DISCHARGE SCREW 8L/D (CHD 280) WATER RING DEGASSING UNIT N° 5 HEATING UNIT (HEAT TRANSFER OIL) TYPE REGLOPLAS 300/24/FM30/1K ELECTRICAL PANEL: PLC SIMATIC S7300 PC-VISUALISATION SYSTEM SPARE PARTS N° 1 GEARBOX XC30/35 FLENDER RATIO 3:1 FOR THE CK200 KO-KNEADER N° 1 ENGINE FOR THE KO-KNEADER – 1000 KW POWER SUPPLY 690 VAC N° 1 GEARBOX FLENDER E2 HA10 FOR THE CHD280 DISCHARGE SCREW AND ENGINE AVERAGE OUTPUT 2800 KG/H OF HDPE MFI (190/2,16) = 0.4 G/10MIN WITH A FILTER PACKAGE OF 110 MICRON. CONSTRUCTION YEAR 2003 CAN BE SEEN RUNNING CONSTRUCTOR’S BROCHURE AVAILABLE : ABC://ABC.X-COMPOUND.CH/TECHNOLOGY/APPLICATIONS/MASTERBATCHES/
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-automatic, working width 420 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n AUTOMATIC, WORKING WIDTH 420 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-tecnova recycling extruder 

120 mm screw 33 l/d
construction year 1988
forced feeding silo and auger
d.c. motor 220 hp, 306 a
electrical cabinet for thermoregulation
10 heating areas
1 degassing system
screen changer
hydraulic power station
die face pelletizer TECNOVA RECYCLING EXTRUDER 120 MM SCREW 33 L/D CONSTRUCTION YEAR 1988 FORCED FEEDING SILO AND AUGER D.C. MOTOR 220 HP, 306 A ELECTRICAL CABINET FOR THERMOREGULATION 10 HEATING AREAS 1 DEGASSING SYSTEM SCREEN CHANGER HYDRAULIC POWER STATION DIE FACE PELLETIZER
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-working width 1000 mm, working height 170 mm\r\nslicing width 830 mm, thickness 10,7 mm\r\nvariable speed of automatic infeed, \r\nstainless steel, model 2003 WORKING WIDTH 1000 MM, WORKING HEIGHT 170 MM\R\NSLICING WIDTH 830 MM, THICKNESS 10,7 MM\R\NVARIABLE SPEED OF AUTOMATIC INFEED, \R\NSTAINLESS STEEL, MODEL 2003
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-gammameccanica 60 mm

screw diam.60 mm. 30 l/d
only 600 worked hours
including conveyor belt
metal detector
grinder-compactor
new volumetric dosing unit
only self produced production scraps
automatic screen changer bdp 60/125 i with hydraulic power pack
gauge with alarm
degassing system
installed power 30 kw a.c.motor
die face pelletizer
centrifuge
new frimac chiller GAMMAMECCANICA 60 MM SCREW DIAM.60 MM. 30 L/D ONLY 600 WORKED HOURS INCLUDING CONVEYOR BELT METAL DETECTOR GRINDER-COMPACTOR NEW VOLUMETRIC DOSING UNIT ONLY SELF PRODUCED PRODUCTION SCRAPS AUTOMATIC SCREEN CHANGER BDP 60/125 I WITH HYDRAULIC POWER PACK GAUGE WITH ALARM DEGASSING SYSTEM INSTALLED POWER 30 KW A.C.MOTOR DIE FACE PELLETIZER CENTRIFUGE NEW FRIMAC CHILLER
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 2.400 €
Ubicación: Land-; gross weight [kg]: 1345; transmission: sonstige; colour: rot; max payload [kg]: 1000 ; GROSS WEIGHT [KG]: 1345; TRANSMISSION: SONSTIGE; COLOUR: ROT; MAX PAYLOAD [KG]: 1000
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-prealpina 105 mm.
for pe pp pc ps 
average output 300/450 kg/h
construction year 1999
good running conditions
including : 
conveyor belt 3,5 kw
metal detector
reel feeder
grinder 45 kw
extruder with screw diam.105 mm. 40 l/d
double degassing system
7 heating areas on barrel + 5 on head, screen, etc.
pressure sensor
screenchanger
die face pelletizer
water bath
centrifuge
extraction vent
cyclon
total installed power 262 kw
electric cabinet PREALPINA 105 MM. FOR PE PP PC PS AVERAGE OUTPUT 300/450 KG/H CONSTRUCTION YEAR 1999 GOOD RUNNING CONDITIONS INCLUDING : CONVEYOR BELT 3,5 KW METAL DETECTOR REEL FEEDER GRINDER 45 KW EXTRUDER WITH SCREW DIAM.105 MM. 40 L/D DOUBLE DEGASSING SYSTEM 7 HEATING AREAS ON BARREL + 5 ON HEAD, SCREEN, ETC. PRESSURE SENSOR SCREENCHANGER DIE FACE PELLETIZER WATER BATH CENTRIFUGE EXTRACTION VENT CYCLON TOTAL INSTALLED POWER 262 KW ELECTRIC CABINET
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-capacity: 120 - 250  hl/h<br />measuring range: 020  °plato (ultra sonic)<br />co2-content: 3 - 5,5  g/l  <br />operation / control:  fully automatic / simatic s7<br />equipment: carbonation pump, membran water degassing unit, chiller, high pressure pump, plug-in construction with 2x 6 static mixer, original wort content is adjusted via original wort measurement (ultrasound) and soft controller<br /> CAPACITY: 120 - 250 HL/H
MEASURING RANGE: 020 °PLATO (ULTRA SONIC)
CO2-CONTENT: 3 - 5,5 G/L
OPERATION / CONTROL: FULLY AUTOMATIC / SIMATIC S7
EQUIPMENT: CARBONATION PUMP, MEMBRAN WATER DEGASSING UNIT, CHILLER, HIGH PRESSURE PUMP, PLUG-IN CONSTRUCTION WITH 2X 6 STATIC MIXER, ORIGINAL WORT CONTENT IS ADJUSTED VIA ORIGINAL WORT MEASUREMENT (ULTRASOUND) AND SOFT CONTROLLER
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-prealpina 130 mm.35 l/d

for pe pp pc ps
average output 450/600 kg/h
construction year 1998
good running conditions
storage silo
forced feeding unit
screw diam.130 mm. 35 l/d, new in 2015
extruder motor 250 kw
semi-automatic screen changer (renewed in 2017)
vacuum degassing unit
underwater pelletizer
water bath
centrifuge
extraction vent
electric cabinet PREALPINA 130 MM.35 L/D FOR PE PP PC PS AVERAGE OUTPUT 450/600 KG/H CONSTRUCTION YEAR 1998 GOOD RUNNING CONDITIONS STORAGE SILO FORCED FEEDING UNIT SCREW DIAM.130 MM. 35 L/D, NEW IN 2015 EXTRUDER MOTOR 250 KW SEMI-AUTOMATIC SCREEN CHANGER (RENEWED IN 2017) VACUUM DEGASSING UNIT UNDERWATER PELLETIZER WATER BATH CENTRIFUGE EXTRACTION VENT ELECTRIC CABINET
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-film evaporator (2x) short path distillation, make uic gmbh, type ea150/kd50/kd10, no f403-3443, new 2003, stoomwezen, material stainless steel (1.4571), working pressure -1/10 bar, with condensor, mounted on frame, with switchgear, weight 4000 kg, extra specifications including degasser, vacuümunit and condenserunit, volume 0,031m3, (8x)heatexchanger for heating/cooling/condenser/evaporating, (4x)vacuum rootsblower, make busch, capacity 250-500 nm3/h, (1x)vacuum liquidring, make busch, capacity 108 nm3/h, (6x)feed/discharge gearpump, make maag, capacity 35 ltr/h, (3x)centrifugalpump, make gwk, capacity 1800 ltr/h, (1x )separatortank gas/liquid, make busch/aquamin, including monofluid unit, ss expansiontank 11ltr, make single type 0054/10: electric heater 4,5ltr, make single type 0054/1, power 18kw, 400 volt: cooler : coolingsurface 0,25m2, make viesel, type gak, tubes 0,9ltr, shell 1,45ltr: centrifugal pump, make speck, type ht/cy, 3,3 kw, 400 volt (atex) :film evaporatorsnew arrivalsdistillation > film evaporatorsnew arrivals what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! FILM EVAPORATOR (2X) SHORT PATH DISTILLATION, MAKE UIC GMBH, TYPE EA150/KD50/KD10, NO F403-3443, NEW 2003, STOOMWEZEN, MATERIAL STAINLESS STEEL (1.4571), WORKING PRESSURE -1/10 BAR, WITH CONDENSOR, MOUNTED ON FRAME, WITH SWITCHGEAR, WEIGHT 4000 KG, EXTRA SPECIFICATIONS INCLUDING DEGASSER, VACUüMUNIT AND CONDENSERUNIT, VOLUME 0,031M3, (8X)HEATEXCHANGER FOR HEATING/COOLING/CONDENSER/EVAPORATING, (4X)VACUUM ROOTSBLOWER, MAKE BUSCH, CAPACITY 250-500 NM3/H, (1X)VACUUM LIQUIDRING, MAKE BUSCH, CAPACITY 108 NM3/H, (6X)FEED/DISCHARGE GEARPUMP, MAKE MAAG, CAPACITY 35 LTR/H, (3X)CENTRIFUGALPUMP, MAKE GWK, CAPACITY 1800 LTR/H, (1X )SEPARATORTANK GAS/LIQUID, MAKE BUSCH/AQUAMIN, INCLUDING MONOFLUID UNIT, SS EXPANSIONTANK 11LTR, MAKE SINGLE TYPE 0054/10: ELECTRIC HEATER 4,5LTR, MAKE SINGLE TYPE 0054/1, POWER 18KW, 400 VOLT: COOLER : COOLINGSURFACE 0,25M2, MAKE VIESEL, TYPE GAK, TUBES 0,9LTR, SHELL 1,45LTR: CENTRIFUGAL PUMP, MAKE SPECK, TYPE HT/CY, 3,3 KW, 400 VOLT (ATEX) :FILM EVAPORATORSNEW ARRIVALSDISTILLATION > FILM EVAPORATORSNEW ARRIVALS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-tecnova recycling line for pe pp
average throughput  900-1100 kg/h depending on materials
masterbatch dosing unit
force-feeding unit
scrap silo with feeding auger
160 mm diam screw, 54 l/d
extruder  with double degassing system
315 kw a.c. motor with inverter
hydrauylic screen changer (a fully automatic screen changer can be supplied)
die face pelletizer
drying centrifuge
control panel
construction year 2007
excellent conditions.
the line is offered reconditioned with warranty TECNOVA RECYCLING LINE FOR PE PP AVERAGE THROUGHPUT 900-1100 KG/H DEPENDING ON MATERIALS MASTERBATCH DOSING UNIT FORCE-FEEDING UNIT SCRAP SILO WITH FEEDING AUGER 160 MM DIAM SCREW, 54 L/D EXTRUDER WITH DOUBLE DEGASSING SYSTEM 315 KW A.C. MOTOR WITH INVERTER HYDRAUYLIC SCREEN CHANGER (A FULLY AUTOMATIC SCREEN CHANGER CAN BE SUPPLIED) DIE FACE PELLETIZER DRYING CENTRIFUGE CONTROL PANEL CONSTRUCTION YEAR 2007 EXCELLENT CONDITIONS. THE LINE IS OFFERED RECONDITIONED WITH WARRANTY
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-horizontal autoclave automatic cylindrical autoclave (1x), make fedegari autoclavi spa, albuzzano, type fo-3530 a5 water spray autoclave, no 3005-e, new 1980, material stainless steel (1.4571), polished inside, capacity 6.250 ltr, internal diameter 1900mm, internal depth 2200mm, inlet/outlet 1400x1260mm (2 sliding doors), with pump make apv, floorspace 3,7x3,5 m, total height 2,9 m, weight ± 6000 kgautoclavesautoclaves > autoclaves HORIZONTAL AUTOCLAVE AUTOMATIC CYLINDRICAL AUTOCLAVE (1X), MAKE FEDEGARI AUTOCLAVI SPA, ALBUZZANO, TYPE FO-3530 A5 WATER SPRAY AUTOCLAVE, NO 3005-E, NEW 1980, MATERIAL STAINLESS STEEL (1.4571), POLISHED INSIDE, CAPACITY 6.250 LTR, INTERNAL DIAMETER 1900MM, INTERNAL DEPTH 2200MM, INLET/OUTLET 1400X1260MM (2 SLIDING DOORS), WITH PUMP MAKE APV, FLOORSPACE 3,7X3,5 M, TOTAL HEIGHT 2,9 M, WEIGHT ± 6000 KGAUTOCLAVESAUTOCLAVES > AUTOCLAVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-planing width 510 mm, leitz centrofix cutterhead, suva fence with electric height adjustment - digitalanzeige-ce PLANING WIDTH 510 MM, LEITZ CENTROFIX CUTTERHEAD, SUVA FENCE WITH ELECTRIC HEIGHT ADJUSTMENT - DIGITALANZEIGE-CE
Vendedor: voelkel-hightech
Año de construcción: usado
Ubicación: Land-horizontal autoclave, make fedegari, type foaf3 sp., no na0471ee, material stainless steel, capacity 1750 ltr, internal width 0,8 m, internal depth 2,65 m, internal height 0,8 m, inlet/outlet 800x800mm / 800x800mm, with trays, tray sizes 240x200mm, working pressure 3 bar, max. temperature 140 °c, with jacket, insulated, with vacuum pump, motor 4,0 kw, 400/690 volt, with transport trolley 12x, mounted on stainless st. frame, with switchgear, floorspace 2,4x6,0 m, total height 2,3 m, weight 3250 kgautoclavesautoclaves > autoclaves HORIZONTAL AUTOCLAVE, MAKE FEDEGARI, TYPE FOAF3 SP., NO NA0471EE, MATERIAL STAINLESS STEEL, CAPACITY 1750 LTR, INTERNAL WIDTH 0,8 M, INTERNAL DEPTH 2,65 M, INTERNAL HEIGHT 0,8 M, INLET/OUTLET 800X800MM / 800X800MM, WITH TRAYS, TRAY SIZES 240X200MM, WORKING PRESSURE 3 BAR, MAX. TEMPERATURE 140 °C, WITH JACKET, INSULATED, WITH VACUUM PUMP, MOTOR 4,0 KW, 400/690 VOLT, WITH TRANSPORT TROLLEY 12X, MOUNTED ON STAINLESS ST. FRAME, WITH SWITCHGEAR, FLOORSPACE 2,4X6,0 M, TOTAL HEIGHT 2,3 M, WEIGHT 3250 KGAUTOCLAVESAUTOCLAVES > AUTOCLAVES
Vendedor: Foeth
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-mobile electromagnetic chuck for grinding or milling magnetic force steplessly adjustable degaussing clamping surface: 450 x 300 mm MOBILE ELECTROMAGNETIC CHUCK FOR GRINDING OR MILLING MAGNETIC FORCE STEPLESSLY ADJUSTABLE DEGAUSSING CLAMPING SURFACE: 450 X 300 MM
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-horizontal autoclave automatic cylindrical autoclave (1x), make fedegari autoclavi spa, albuzzano, type fow-5-8500 water spray autoclave, no 3540-e, new 1984, material stainless steel (316), capacity 27.250 ltr, internal diameter 2000mm, internal depth 8500mm, inlet/outlet 1400x1250mm (2 sliding doors), working pressure 3 bar, test pressure 4,2 bar, max. temperature 143 degr. c., with pump (2x) make fristam, motor 15,0 kw, 380 volt, floorspace 9,5x3,5 m, total height 3,0 m, weight 15.000 kg, extra specifications - equipped with roller conveyor (motor 0,75 kw), holds 10 pallets with dimensions 1200x800mm, with plate heat exchanger (2x) make apvautoclavesautoclaves > autoclaves HORIZONTAL AUTOCLAVE AUTOMATIC CYLINDRICAL AUTOCLAVE (1X), MAKE FEDEGARI AUTOCLAVI SPA, ALBUZZANO, TYPE FOW-5-8500 WATER SPRAY AUTOCLAVE, NO 3540-E, NEW 1984, MATERIAL STAINLESS STEEL (316), CAPACITY 27.250 LTR, INTERNAL DIAMETER 2000MM, INTERNAL DEPTH 8500MM, INLET/OUTLET 1400X1250MM (2 SLIDING DOORS), WORKING PRESSURE 3 BAR, TEST PRESSURE 4,2 BAR, MAX. TEMPERATURE 143 DEGR. C., WITH PUMP (2X) MAKE FRISTAM, MOTOR 15,0 KW, 380 VOLT, FLOORSPACE 9,5X3,5 M, TOTAL HEIGHT 3,0 M, WEIGHT 15.000 KG, EXTRA SPECIFICATIONS - EQUIPPED WITH ROLLER CONVEYOR (MOTOR 0,75 KW), HOLDS 10 PALLETS WITH DIMENSIONS 1200X800MM, WITH PLATE HEAT EXCHANGER (2X) MAKE APVAUTOCLAVESAUTOCLAVES > AUTOCLAVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-	twin screw extruders, parallel
	manufacturer: weber
	type: ds-6.5
	year of construction: 1999
	serial no.: ds60-754
        hours of operation: 23,700 hours
	screw diameter: 2 x 65 mm
	length: 17 x d
	screw geometry: for rigid pvc profiles
	screw torque: 3000 nm
	screw speed: 1-40 1/min
	drive motor: dc motor, thyristor-controlled
	power: approx. 20.0 kw
	cylinder heating/cooling zones: 5/4 (air cooling with fan)
	mould heating zones: 6 incl. flange
	control: computerized control system (wps)
	degassing zone: 1 x vacuum pump (approx. 0.75 kw)
	output: approx. 80-100 kg / h for rigid pvc,.
	depending on the material and product
	power: approx. 35 kw (without tools)
        accessories: dosing device incl. material hopper
	size: 3200 x 1200 x 2300 mm (incl. funnel)
	weight: approx. 2000 kg
	condition: used and overhauled
	      TWIN SCREW EXTRUDERS, PARALLEL MANUFACTURER: WEBER TYPE: DS-6.5 YEAR OF CONSTRUCTION: 1999 SERIAL NO.: DS60-754 HOURS OF OPERATION: 23,700 HOURS SCREW DIAMETER: 2 X 65 MM LENGTH: 17 X D SCREW GEOMETRY: FOR RIGID PVC PROFILES SCREW TORQUE: 3000 NM SCREW SPEED: 1-40 1/MIN DRIVE MOTOR: DC MOTOR, THYRISTOR-CONTROLLED POWER: APPROX. 20.0 KW CYLINDER HEATING/COOLING ZONES: 5/4 (AIR COOLING WITH FAN) MOULD HEATING ZONES: 6 INCL. FLANGE CONTROL: COMPUTERIZED CONTROL SYSTEM (WPS) DEGASSING ZONE: 1 X VACUUM PUMP (APPROX. 0.75 KW) OUTPUT: APPROX. 80-100 KG / H FOR RIGID PVC,. DEPENDING ON THE MATERIAL AND PRODUCT POWER: APPROX. 35 KW (WITHOUT TOOLS) ACCESSORIES: DOSING DEVICE INCL. MATERIAL HOPPER SIZE: 3200 X 1200 X 2300 MM (INCL. FUNNEL) WEIGHT: APPROX. 2000 KG CONDITION: USED AND OVERHAULED
Vendedor: A. Knorr GmbH
Año de construcción: usado
Ubicación: Land-drive: 132 kw<br/>screw size: 72 mm<br/>screw length: 44 l/d<br/>material: tpe, pp, pa, pet div material<br/>capacity: 500 kg/h<br/>twin-screw compounding line incl. 2 x side feeder,<br/>degassing, screen changer, strand, waterring or underwater<br/>pelletizing system<br/><br/><br/><br/> DRIVE: 132 KW
SCREW SIZE: 72 MM
SCREW LENGTH: 44 L/D
MATERIAL: TPE, PP, PA, PET DIV MATERIAL
CAPACITY: 500 KG/H
TWIN-SCREW COMPOUNDING LINE INCL. 2 X SIDE FEEDER,
DEGASSING, SCREEN CHANGER, STRAND, WATERRING OR UNDERWATER
PELLETIZING SYSTEM



Vendedor: PLASTICO TRADING GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-mixer for carbonized beverages for sale. mint condition.

famix turbo digi

capacity: 12.000 l/h
blending: 1:2 to 1:8
beverage temperature:
co²-controller: yes, customizable
brix-controller: yes, customizable
pumps: 4 - vacuum, carbonator, dosing, hi-pressure

other:
2 tanks.
5 components - water + sugar syrup + precursor + acid + essence.
entirely made of stainless steel.

supplies: 
cip, vacuum deaeration,degassing 
 MIXER FOR CARBONIZED BEVERAGES FOR SALE. MINT CONDITION. FAMIX TURBO DIGI CAPACITY: 12.000 L/H BLENDING: 1:2 TO 1:8 BEVERAGE TEMPERATURE: CO²-CONTROLLER: YES, CUSTOMIZABLE BRIX-CONTROLLER: YES, CUSTOMIZABLE PUMPS: 4 - VACUUM, CARBONATOR, DOSING, HI-PRESSURE OTHER: 2 TANKS. 5 COMPONENTS - WATER + SUGAR SYRUP + PRECURSOR + ACID + ESSENCE. ENTIRELY MADE OF STAINLESS STEEL. SUPPLIES: CIP, VACUUM DEAERATION,DEGASSING
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Ubicación: Land-screw size: 72 mm<br/>capacity: 700 kg/h<br/>drive: 132 kw<br/>l/d: 44 l/d<br/>twin-screw compounding line incl. 2 x side feeder,<br/>degassing, screen changer, strand, waterring or underwater<br/>pelletizing system<br/><br/><br/><br/> SCREW SIZE: 72 MM
CAPACITY: 700 KG/H
DRIVE: 132 KW
L/D: 44 L/D
TWIN-SCREW COMPOUNDING LINE INCL. 2 X SIDE FEEDER,
DEGASSING, SCREEN CHANGER, STRAND, WATERRING OR UNDERWATER
PELLETIZING SYSTEM



Vendedor: PLASTICO TRADING GmbH & Co.KG
Año de construcción: usado
Precio: 3.200 €
Ubicación: Land-power supply 400v 4, 0kw
planing width 500 mm
extraction 1 x 140 mm
fence angle adjustment
3-meter wave with strip blades
wxdxh: 2850 x 910 x 940 mm
weight approx. 750 kg POWER SUPPLY 400V 4, 0KW PLANING WIDTH 500 MM EXTRACTION 1 X 140 MM FENCE ANGLE ADJUSTMENT 3-METER WAVE WITH STRIP BLADES WXDXH: 2850 X 910 X 940 MM WEIGHT APPROX. 750 KG
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity: 120 - 140  hl/h<br />pressure: 7,5  bar    <br />power consumption: 12,45 kw<br />basic construction: mounted on rack<br />equipment: 3 vessels (degassing, carbonisation, mixing), pump, bran & lübbe, nc 32,  impregnating pump (hilge), vacuum pump, remark: 2 components (base material, water/ co2)<br /> CAPACITY: 120 - 140 HL/H
PRESSURE: 7,5 BAR
POWER CONSUMPTION: 12,45 KW
BASIC CONSTRUCTION: MOUNTED ON RACK
EQUIPMENT: 3 VESSELS (DEGASSING, CARBONISATION, MIXING), PUMP, BRAN & LüBBE, NC 32, IMPREGNATING PUMP (HILGE), VACUUM PUMP, REMARK: 2 COMPONENTS (BASE MATERIAL, WATER/ CO2)
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-set up planer by kirchner.
planing width 50 cm
4 blade shaft
table dimension: 250 x 56 cm SET UP PLANER BY KIRCHNER. PLANING WIDTH 50 CM 4 BLADE SHAFT TABLE DIMENSION: 250 X 56 CM
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Ubicación: Land-engine 4, 8kw 380v
planing width 510 mm
2-drum with strip blades
hydraulic height adjustment of the inspection table with foot pump
pointed hollow joint can be adjusted
central lubrication system for acceptance table
1370 mm decrease table
length 1080 mm tabletop
limb protection for drum
stop at 45 â° adjustable
star-delta switch with reversing brake ENGINE 4, 8KW 380V PLANING WIDTH 510 MM 2-DRUM WITH STRIP BLADES HYDRAULIC HEIGHT ADJUSTMENT OF THE INSPECTION TABLE WITH FOOT PUMP POINTED HOLLOW JOINT CAN BE ADJUSTED CENTRAL LUBRICATION SYSTEM FOR ACCEPTANCE TABLE 1370 MM DECREASE TABLE LENGTH 1080 MM TABLETOP LIMB PROTECTION FOR DRUM STOP AT 45 &ACIRC;&DEG; ADJUSTABLE STAR-DELTA SWITCH WITH REVERSING BRAKE
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: 20.450 £
Ubicación: Land-newly refurbished is this boy 90a manufactured in 2007 and has only 34400 run hours on the clock.  the procan ct controller has proven to be very popular for dr. boy and the current control systems offered have evolved from the original procan control.  additional features/options with this machine include;  robot interface,  dega hopper loader with hp92 controller & virgin/regrind dosing unit and a color-exact masterbatch unit with dega loader complete with pixie controller.

as with all machines sold by stv machinery, the machine will be fully refurbished so age and run hours are not a fair representation of the machines condition. come in and take a closer look to really inspect the condition and we can go through all of our work done on the machine.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free. NEWLY REFURBISHED IS THIS BOY 90A MANUFACTURED IN 2007 AND HAS ONLY 34400 RUN HOURS ON THE CLOCK. THE PROCAN CT CONTROLLER HAS PROVEN TO BE VERY POPULAR FOR DR. BOY AND THE CURRENT CONTROL SYSTEMS OFFERED HAVE EVOLVED FROM THE ORIGINAL PROCAN CONTROL. ADDITIONAL FEATURES/OPTIONS WITH THIS MACHINE INCLUDE; ROBOT INTERFACE, DEGA HOPPER LOADER WITH HP92 CONTROLLER & VIRGIN/REGRIND DOSING UNIT AND A COLOR-EXACT MASTERBATCH UNIT WITH DEGA LOADER COMPLETE WITH PIXIE CONTROLLER. AS WITH ALL MACHINES SOLD BY STV MACHINERY, THE MACHINE WILL BE FULLY REFURBISHED SO AGE AND RUN HOURS ARE NOT A FAIR REPRESENTATION OF THE MACHINES CONDITION. COME IN AND TAKE A CLOSER LOOK TO REALLY INSPECT THE CONDITION AND WE CAN GO THROUGH ALL OF OUR WORK DONE ON THE MACHINE. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Precio: 19.250 £
Ubicación: Land-newly refurbished, boy 90a, originally manufactured 2005 with recorded run hours of 45500.  the machine is equipped with the procan ct controller and other options include; robot interface, dega hopper loader with hp92 controller, virgin/regrind dosing unit and color-exact masterbatch unit with dega loader with pixie controller.

as with all machines sold by stv machinery, the machine will be fully refurbished so age and run hours are not a fair representation of the machines condition.  come in and take a closer look to really inspect the condition and we can go through all of our work done on the machine.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.    NEWLY REFURBISHED, BOY 90A, ORIGINALLY MANUFACTURED 2005 WITH RECORDED RUN HOURS OF 45500. THE MACHINE IS EQUIPPED WITH THE PROCAN CT CONTROLLER AND OTHER OPTIONS INCLUDE; ROBOT INTERFACE, DEGA HOPPER LOADER WITH HP92 CONTROLLER, VIRGIN/REGRIND DOSING UNIT AND COLOR-EXACT MASTERBATCH UNIT WITH DEGA LOADER WITH PIXIE CONTROLLER. AS WITH ALL MACHINES SOLD BY STV MACHINERY, THE MACHINE WILL BE FULLY REFURBISHED SO AGE AND RUN HOURS ARE NOT A FAIR REPRESENTATION OF THE MACHINES CONDITION. COME IN AND TAKE A CLOSER LOOK TO REALLY INSPECT THE CONDITION AND WE CAN GO THROUGH ALL OF OUR WORK DONE ON THE MACHINE. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-pelletizing plant "werner & pfleiderer" â?¢ extruder type: zsk 30
â?¢ year: 2018
â?¢ control â?¢ drive: dc engine 11,4 kw â?¢ snails: 2 x ã? 30 mm
â?¢ l/d 32:1
â?¢ worm turns: 600 rpm
â?¢ extruder heating: 17 kw â?¢ degassing - vacuum pump
â?¢ extruder water cooling â?¢ 1 x material dosage
â?¢ extrusion nozzle: 5 x ã? 3 mm
â?¢ va - water bath: 1000 x 250 x 300 mm
â?¢ stangranulator: 
 PELLETIZING PLANT "WERNER & PFLEIDERER" &ACIRC;?&CENT; EXTRUDER TYPE: ZSK 30 &ACIRC;?&CENT; YEAR: 2018 &ACIRC;?&CENT; CONTROL &ACIRC;?&CENT; DRIVE: DC ENGINE 11,4 KW &ACIRC;?&CENT; SNAILS: 2 X &ATILDE;? 30 MM &ACIRC;?&CENT; L/D 32:1 &ACIRC;?&CENT; WORM TURNS: 600 RPM &ACIRC;?&CENT; EXTRUDER HEATING: 17 KW &ACIRC;?&CENT; DEGASSING - VACUUM PUMP &ACIRC;?&CENT; EXTRUDER WATER COOLING &ACIRC;?&CENT; 1 X MATERIAL DOSAGE &ACIRC;?&CENT; EXTRUSION NOZZLE: 5 X &ATILDE;? 3 MM &ACIRC;?&CENT; VA - WATER BATH: 1000 X 250 X 300 MM &ACIRC;?&CENT; STANGRANULATOR:
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Ubicación: Land-unused machine in china

consists of:

extruder type: shj-30 year: 2017 ac motor: 11 kw heating: 15 kw
09jmd00x
screw speed: 600 rpm concurrent twin-screw extruder 2 x 30 mm / 40 d
screw modular design (screw conveyor elements).
2 x degassing zone
double screw feeder
1 x seitendosierer (optional)

water bath va
250 x 300 x 2000 mm

pelletizer
type: sg - 100

throughput: approx. 50 kg / h depending on the material mix, or

machine is plugged in and is ready for testing.
test is possible. date by arrangement. UNUSED MACHINE IN CHINA CONSISTS OF: EXTRUDER TYPE: SHJ-30 YEAR: 2017 AC MOTOR: 11 KW HEATING: 15 KW 09JMD00X SCREW SPEED: 600 RPM CONCURRENT TWIN-SCREW EXTRUDER 2 X 30 MM / 40 D SCREW MODULAR DESIGN (SCREW CONVEYOR ELEMENTS). 2 X DEGASSING ZONE DOUBLE SCREW FEEDER 1 X SEITENDOSIERER (OPTIONAL) WATER BATH VA 250 X 300 X 2000 MM PELLETIZER TYPE: SG - 100 THROUGHPUT: APPROX. 50 KG / H DEPENDING ON THE MATERIAL MIX, OR MACHINE IS PLUGGED IN AND IS READY FOR TESTING. TEST IS POSSIBLE. DATE BY ARRANGEMENT.
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Precio: 2.800 €
Ubicación: Land-used set off internal engine number: m2653 manufacturer ba type as 41 machine number 808 built 1981 planing width 410 mm number of blades 4 power 4 kw operating voltage 500 volt power 6.6 amps weight 850 kg				
total length ca. 2.65 m slotted table lips with some knives item location: 58730 frã¶ndenberg/ruhr

the machine can be visited like to see power and tried out.

we will gladly send you more photos by e-mail.

a forklift/crane for loading is available.

we reserve the right to a sale.

there is the way learned to examine suburb for sale articles. specific questions should be clarified in advance. the information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. errors are reserved. the warranty / guarantee is excluded. the goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. this offer is only to traders, merchants and legal persons.
specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

the structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

see also my other offers.

the article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
otherwise, the cost of the storage charge must be made.
 USED SET OFF INTERNAL ENGINE NUMBER: M2653 MANUFACTURER BA TYPE AS 41 MACHINE NUMBER 808 BUILT 1981 PLANING WIDTH 410 MM NUMBER OF BLADES 4 POWER 4 KW OPERATING VOLTAGE 500 VOLT POWER 6.6 AMPS WEIGHT 850 KG TOTAL LENGTH CA. 2.65 M SLOTTED TABLE LIPS WITH SOME KNIVES ITEM LOCATION: 58730 FR&ATILDE;&PARA;NDENBERG/RUHR THE MACHINE CAN BE VISITED LIKE TO SEE POWER AND TRIED OUT. WE WILL GLADLY SEND YOU MORE PHOTOS BY E-MAIL. A FORKLIFT/CRANE FOR LOADING IS AVAILABLE. WE RESERVE THE RIGHT TO A SALE. THERE IS THE WAY LEARNED TO EXAMINE SUBURB FOR SALE ARTICLES. SPECIFIC QUESTIONS SHOULD BE CLARIFIED IN ADVANCE. THE INFORMATION, TECHNICAL DATA, DIMENSIONS, YEAR, CONDITION ARE NON-BINDING AND WERE SHOWN TO THE BEST OF MY KNOWLEDGE AND BELIEF. ERRORS ARE RESERVED. THE WARRANTY / GUARANTEE IS EXCLUDED. THE GOODS WILL BE SOLD FROM LOCATION / CAMP, WITH NATIONAL TRANSFER OF RISK TO THE BUYER, THIS ALSO APPLIES TO A SHIPPING FROM US, WHICH WE HAVE CARRIED OUT ON YOUR BEHALF. THIS OFFER IS ONLY TO TRADERS, MERCHANTS AND LEGAL PERSONS. SPECIFIED TRADE NAMES, AND TRADEMARKS ARE PROPERTY OF THEIR OWNERS AND ARE USED ONLY FOR IDENTIFICATION AND DESCRIPTION OF PRODUCTS. THE STRUCTURE AND THE ELECTRICAL CONNECTION OF THE MACHINE / THE DEVICE MUST BE CARRIED OUT BY A QUALIFIED PERSON TRAINED OR CHECKED. SEE ALSO MY OTHER OFFERS. THE ARTICLE MUST BE PAID UNLESS OTHERWISE AGREED WITHIN 14 DAYS OF INVOICE CREATION AND PICKED UP. OTHERWISE, THE COST OF THE STORAGE CHARGE MUST BE MADE.
Vendedor: Fritz Ernst Maschinenhandel e K
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand aluminium strip production plant
mfc.:	seoul axis, alco eng., seoul furnace, hana eng., ramco, mannesmann sack, 
	duksung eng., poscon, 					
built:	1995
slab size:	7000 ×1400 ×508  mm – l x w x h	
hot rolling mill	strip width: 	1380 mm	exit thickness:		6 – 10 mm
cold rolling mill	strip width:	1380 mm	exit thickness:		0.2 mm
capacity: 		70,000 tons/ year
scope of supply:	melting furnace	holding furnace	slab caster	degassing 
	air pollution system	cooling tower	ingot scalper	band saw	
slab heating furnaces
	hot rolling mill		cold rolling mill	annealing furnac cut-to-length line
	slitter		cranes		machine tools	
 QTY. 1 SECOND-HAND ALUMINIUM STRIP PRODUCTION PLANT MFC.: SEOUL AXIS, ALCO ENG., SEOUL FURNACE, HANA ENG., RAMCO, MANNESMANN SACK, DUKSUNG ENG., POSCON, BUILT: 1995 SLAB SIZE: 7000 ×1400 ×508 MM – L X W X H HOT ROLLING MILL STRIP WIDTH: 1380 MM EXIT THICKNESS: 6 – 10 MM COLD ROLLING MILL STRIP WIDTH: 1380 MM EXIT THICKNESS: 0.2 MM CAPACITY: 70,000 TONS/ YEAR SCOPE OF SUPPLY: MELTING FURNACE HOLDING FURNACE SLAB CASTER DEGASSING AIR POLLUTION SYSTEM COOLING TOWER INGOT SCALPER BAND SAW SLAB HEATING FURNACES HOT ROLLING MILL COLD ROLLING MILL ANNEALING FURNAC CUT-TO-LENGTH LINE SLITTER CRANES MACHINE TOOLS
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-â?¢ extruder: 2 x 42mm â?¢ year of construction: 2003 (year 2018)
â?¢ control â?¢ drive: dc engine - 60 kw â?¢ l/d 40:1
â?¢ worm turns: 800 rpm
â?¢ extruder heating: 28 â?¢ mamassedruckanzeiger
â?¢ degassing - vacuum pump â?¢ water ring pelletising - leistritz / gala
â?¢ 1 x material dosing: "brabender"
â?¢ 1 x material page loading: k-tron kqx2 (side feeder)

fully reconditioned machine.
further details on request. &ACIRC;?&CENT; EXTRUDER: 2 X 42MM &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2003 (YEAR 2018) &ACIRC;?&CENT; CONTROL &ACIRC;?&CENT; DRIVE: DC ENGINE - 60 KW &ACIRC;?&CENT; L/D 40:1 &ACIRC;?&CENT; WORM TURNS: 800 RPM &ACIRC;?&CENT; EXTRUDER HEATING: 28 &ACIRC;?&CENT; MAMASSEDRUCKANZEIGER &ACIRC;?&CENT; DEGASSING - VACUUM PUMP &ACIRC;?&CENT; WATER RING PELLETISING - LEISTRITZ / GALA &ACIRC;?&CENT; 1 X MATERIAL DOSING: "BRABENDER" &ACIRC;?&CENT; 1 X MATERIAL PAGE LOADING: K-TRON KQX2 (SIDE FEEDER) FULLY RECONDITIONED MACHINE. FURTHER DETAILS ON REQUEST.
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-hofmann

set off, planing machine

planing width 410 mm, 2 - drum

technical data:
 
hofmann dresser planing width 410 mm

2-drum

total length of table 2430 mm

length 1430 mm specification table

weight of 710 kg

a vat invoice is created for you.
 HOFMANN SET OFF, PLANING MACHINE PLANING WIDTH 410 MM, 2 - DRUM TECHNICAL DATA: HOFMANN DRESSER PLANING WIDTH 410 MM 2-DRUM TOTAL LENGTH OF TABLE 2430 MM LENGTH 1430 MM SPECIFICATION TABLE WEIGHT OF 710 KG A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Precio: 930 €
Ubicación: Land-planes exactly the abrichthobelmaschine in a good condition. 
 overall table length 2500 mm
 task table 1500 mm
 planing width 400 mm
 4 blade shaft incl. 3 set planer blades
 4 hp engine PLANES EXACTLY THE ABRICHTHOBELMASCHINE IN A GOOD CONDITION. OVERALL TABLE LENGTH 2500 MM TASK TABLE 1500 MM PLANING WIDTH 400 MM 4 BLADE SHAFT INCL. 3 SET PLANER BLADES 4 HP ENGINE
Vendedor: MAB Handelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-max. overpressure: 1bar, max. temperature: 120°c, capacity: 1.5t, with degasser loos: max. overpressure: 1bar, max. temperature: 120°c, capacity: 102l, heating output: 286kw.  MAX. OVERPRESSURE: 1BAR, MAX. TEMPERATURE: 120°C, CAPACITY: 1.5T, WITH DEGASSER LOOS: MAX. OVERPRESSURE: 1BAR, MAX. TEMPERATURE: 120°C, CAPACITY: 102L, HEATING OUTPUT: 286KW.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-prealpina 105 mm 35 l/d

for lldpe ldpe hdpe ppl ps eps abs etc.
forced feeding unit and  7,5 m3 scrap silo
105 mm extruder 35 l/d with bimetallic barrel
4 kw vacuum  pump for degassing
110 kw d.c. motor on extruder with driver
hydraulic screen changer
screening section mm.190 diameter,
hydraulic power unit
electrical cabinet
prealpina tp20 die face pelletizer
stainless steel cooling chamber.
water/granulate conveyor with stainless steel vibro- sifting unit.
stainless steel vertical centrifuge
electric cabinet for management of the whole line
installed power 220 kw/h,average used power about 60% when working.
the line is offered reconditioned with warranty     PREALPINA 105 MM 35 L/D FOR LLDPE LDPE HDPE PPL PS EPS ABS ETC. FORCED FEEDING UNIT AND 7,5 M3 SCRAP SILO 105 MM EXTRUDER 35 L/D WITH BIMETALLIC BARREL 4 KW VACUUM PUMP FOR DEGASSING 110 KW D.C. MOTOR ON EXTRUDER WITH DRIVER HYDRAULIC SCREEN CHANGER SCREENING SECTION MM.190 DIAMETER, HYDRAULIC POWER UNIT ELECTRICAL CABINET PREALPINA TP20 DIE FACE PELLETIZER STAINLESS STEEL COOLING CHAMBER. WATER/GRANULATE CONVEYOR WITH STAINLESS STEEL VIBRO- SIFTING UNIT. STAINLESS STEEL VERTICAL CENTRIFUGE ELECTRIC CABINET FOR MANAGEMENT OF THE WHOLE LINE INSTALLED POWER 220 KW/H,AVERAGE USED POWER ABOUT 60% WHEN WORKING. THE LINE IS OFFERED RECONDITIONED WITH WARRANTY
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-prealpina pelletizer 

for pe pp pc ps abs flakes
hopper with dosing unit
extruder with screw diam. 105 mm. 35 l/d
average output 300/450 kg/h depending on materials
hydraulic power station
abb d.c. motor 117 kw
oil pump loop gearbox
dynisco pressure unit
vacuum degassing pump
screen changer 190 mm. diam. screens
*** die face pelletizer or strand pelletizer with cooling bath and mill ***
centrifuge
electric cabinet
this line is offered with complete reconditioning and warranty   PREALPINA PELLETIZER FOR PE PP PC PS ABS FLAKES HOPPER WITH DOSING UNIT EXTRUDER WITH SCREW DIAM. 105 MM. 35 L/D AVERAGE OUTPUT 300/450 KG/H DEPENDING ON MATERIALS HYDRAULIC POWER STATION ABB D.C. MOTOR 117 KW OIL PUMP LOOP GEARBOX DYNISCO PRESSURE UNIT VACUUM DEGASSING PUMP SCREEN CHANGER 190 MM. DIAM. SCREENS *** DIE FACE PELLETIZER OR STRAND PELLETIZER WITH COOLING BATH AND MILL *** CENTRIFUGE ELECTRIC CABINET THIS LINE IS OFFERED WITH COMPLETE RECONDITIONING AND WARRANTY
Vendedor: GERMANPLAST SRL
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DEGA types: